Imported Upstream version 3.2.0upstream

23 files changed, 22334 insertions, 0 deletions

diff --git a/autoconf/INSTALL b/autoconf/INSTALL
new file mode 100644
index 0000000..a1e89e1
--- /dev/null
+++ b/autoconf/INSTALL
@@ -0,0 +1,370 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Inc.
+
+   Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+   Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.  Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below.  The lack of an optional feature in a given package is not
+necessarily a bug.  More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+   The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.
+
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package, generally using the just-built uninstalled binaries.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.  When installing into a prefix owned by root, it is
+     recommended that the package be configured and built as a regular
+     user, and only the `make install' phase executed with root
+     privileges.
+
+  5. Optionally, type `make installcheck' to repeat any self-tests, but
+     this time using the binaries in their final installed location.
+     This target does not install anything.  Running this target as a
+     regular user, particularly if the prior `make install' required
+     root privileges, verifies that the installation completed
+     correctly.
+
+  6. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+  7. Often, you can also type `make uninstall' to remove the installed
+     files again.  In practice, not all packages have tested that
+     uninstallation works correctly, even though it is required by the
+     GNU Coding Standards.
+
+  8. Some packages, particularly those that use Automake, provide `make
+     distcheck', which can by used by developers to test that all other
+     targets like `make install' and `make uninstall' work correctly.
+     This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you can use GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.  This
+is known as a "VPATH" build.
+
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+   On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor.  Like
+this:
+
+     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CPP="gcc -E" CXXCPP="g++ -E"
+
+   This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+   By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.  In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+   The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+   The first method involves providing an override variable for each
+affected directory.  For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'.  Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated.  The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the `DESTDIR' variable.  For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names.  The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters.  On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+   Some packages offer the ability to configure how verbose the
+execution of `make' will be.  For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+   HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved.  Use GNU `make'
+instead.
+
+   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
+a workaround.  If GNU CC is not installed, it is therefore recommended
+to try
+
+     ./configure CC="cc"
+
+and if that doesn't work, try
+
+     ./configure CC="cc -nodtk"
+
+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+   On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'.  It is recommended to use the following options:
+
+     ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS
+     KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
+
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+     Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+     Print a summary of the options unique to this package's
+     `configure', and exit.  The `short' variant lists options used
+     only in the top level, while the `recursive' variant lists options
+     also present in any nested packages.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names::
+     for more details, including other options available for fine-tuning
+     the installation locations.
+
+`--no-create'
+`-n'
+     Run the configure checks, but stop before creating any output
+     files.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
diff --git a/autoconf/Makefile.am b/autoconf/Makefile.am
new file mode 100644
index 0000000..6fc4f33
--- /dev/null
+++ b/autoconf/Makefile.am
@@ -0,0 +1,19 @@
+
+AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE
+
+lib_LTLIBRARIES = libsqlite3.la
+libsqlite3_la_SOURCES = sqlite3.c
+libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8
+
+bin_PROGRAMS = sqlite3
+sqlite3_SOURCES = shell.c sqlite3.h
+sqlite3_LDADD = $(top_builddir)/libsqlite3.la @READLINE_LIBS@
+sqlite3_DEPENDENCIES = $(top_builddir)/libsqlite3.la
+
+include_HEADERS = sqlite3.h sqlite3ext.h
+
+EXTRA_DIST = sqlite3.1 tea
+pkgconfigdir = ${libdir}/pkgconfig
+pkgconfig_DATA = sqlite3.pc
+
+man_MANS = sqlite3.1
diff --git a/autoconf/README b/autoconf/README
new file mode 100644
index 0000000..dd8cca2
--- /dev/null
+++ b/autoconf/README
@@ -0,0 +1,32 @@
+
+This package contains:
+
+ * the SQLite library amalgamation (single file) source code distribution,
+ * the shell.c file used to build the sqlite3 shell too, and
+ * the sqlite3.h and sqlite3ext.h header files required to link programs
+   and sqlite extensions against the installed libary.
+ * autoconf/automake installation infrastucture.
+
+The generic installation instructions for autoconf/automake are found
+in the INSTALL file.
+
+The following SQLite specific boolean options are supported:
+
+  --enable-readline           use readline in shell tool   [default=yes]
+  --enable-threadsafe         build a thread-safe library  [default=yes]
+  --enable-dynamic-extensions support loadable extensions  [default=yes]
+
+The default value for the CFLAGS variable (options passed to the C 
+compiler) includes debugging symbols in the build, resulting in larger
+binaries than are necessary. Override it on the configure command
+line like this:
+
+  $ CFLAGS="-Os" ./configure
+
+to produce a smaller installation footprint.
+
+Other SQLite compilation parameters can also be set using CFLAGS. For
+example:
+
+  $ CFLAGS="-Os -DSQLITE_OMIT_TRIGGERS" ./configure
+
diff --git a/autoconf/README.first b/autoconf/README.first
new file mode 100644
index 0000000..6676228
--- /dev/null
+++ b/autoconf/README.first
@@ -0,0 +1,57 @@
+
+This file describes how to use the files in this directory to create a new
+version of the "autoconf-amalgamation" package.
+
+1. The following files should have executable permission:
+
+  chmod 755 install-sh 
+  chmod 755 missing 
+  chmod 755 depcomp
+  chmod 755 config.sub
+  chmod 755 config.guess
+
+2. Copy new versions of the following SQLite files into this directory:
+
+  sqlite3.c
+  sqlite3.h
+  sqlite3ext.h
+  sqlite3.1
+  sqlite3.pc.in
+  shell.c
+
+3. Update the SQLite version number in the AC_INIT macro in file 
+   configure.ac:
+
+     AC_INIT(sqlite, 3.6.3, http://www.sqlite.org)
+
+4. Run the following commands to push the version number change through
+   to the generated files.
+
+  aclocal
+  autoconf
+  automake
+
+5. Create the tclsqlite3.c file in the tea/generic directory. As follows:
+
+  mkdir -p tea/generic
+  echo "#ifdef USE_SYSTEM_SQLITE"      > tea/generic/tclsqlite3.c 
+  echo "# include <sqlite3.h>"        >> tea/generic/tclsqlite3.c
+  echo "#else"                        >> tea/generic/tclsqlite3.c
+  echo "#include \"../../sqlite3.c\"" >> tea/generic/tclsqlite3.c
+  echo "#endif"                       >> tea/generic/tclsqlite3.c
+  cat  ../src/tclsqlite.c             >> tea/generic/tclsqlite3.c
+
+6. Update the SQLite version in the AC_INIT macro in file tea/configure.in:
+
+  AC_INIT([sqlite], [3.6.3])
+
+7. From the 'tea' directory, run the following commands:
+
+  autoconf
+  rm -rf autom4te.cache
+
+8. Run "./configure && make dist". This builds a distribution package
+   named something like "sqlite-3.6.3.tar.gz". Rename to 
+   "sqlite-amalgamation-3.6.3.tar.gz" and use.
+
+
diff --git a/autoconf/config.guess b/autoconf/config.guess
new file mode 100755
index 0000000..d622a44
--- /dev/null
+++ b/autoconf/config.guess
@@ -0,0 +1,1530 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+#   2011, 2012 Free Software Foundation, Inc.
+
+timestamp='2012-02-10'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner.  Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep -q __ELF__
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+		os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+	echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux${UNAME_RELEASE}
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+	echo m68k-milan-mint${UNAME_RELEASE}
+	exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+	echo m68k-hades-mint${UNAME_RELEASE}
+	exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+	echo m68k-unknown-mint${UNAME_RELEASE}
+	exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[4567])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "${sc_cpu_version}" in
+		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "${sc_kernel_bits}" in
+			  32) HP_ARCH="hppa2.0n" ;;
+			  64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+			esac ;;
+		    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^		//' << EOF >$dummy.c
+
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
+
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
+
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+	exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+	exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+	exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+	exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    5000:UNIX_System_V:4.*:*)
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case ${UNAME_PROCESSOR} in
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    *:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    i*:MSYS*:*)
+	echo ${UNAME_MACHINE}-pc-msys
+	exit ;;
+    i*:windows32*:*)
+	# uname -m includes "-pc" on this system.
+	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    *:Interix*:*)
+	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    authenticamd | genuineintel | EM64T)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    8664:Windows_NT:*)
+	echo x86_64-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    aarch64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit ;;
+    arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	else
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	    else
+		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+	    fi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    cris:Linux:*:*)
+	echo ${UNAME_MACHINE}-axis-linux-gnu
+	exit ;;
+    crisv32:Linux:*:*)
+	echo ${UNAME_MACHINE}-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    hexagon:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    i*86:Linux:*:*)
+	LIBC=gnu
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=${UNAME_MACHINE}el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=${UNAME_MACHINE}
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    or32:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-gnu
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
+	esac
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit ;;
+    sh64*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    tile*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-gnu
+	exit ;;
+    x86_64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    xtensa*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+	# Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configury will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
+	exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+		echo mips-nec-sysv${UNAME_RELEASE}
+	else
+		echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+	exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
+	    i386)
+		eval $set_cc_for_build
+		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		      grep IS_64BIT_ARCH >/dev/null
+		  then
+		      UNAME_PROCESSOR="x86_64"
+		  fi
+		fi ;;
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NEO-?:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+	echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
+    x86_64:VMkernel:*:*)
+	echo ${UNAME_MACHINE}-unknown-esx
+	exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+	"4"
+#else
+	""
+#endif
+	); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    c34*)
+	echo c34-convex-bsd
+	exit ;;
+    c38*)
+	echo c38-convex-bsd
+	exit ;;
+    c4*)
+	echo c4-convex-bsd
+	exit ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/autoconf/config.sub b/autoconf/config.sub
new file mode 100755
index 0000000..c894da4
--- /dev/null
+++ b/autoconf/config.sub
@@ -0,0 +1,1773 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+#   2011, 2012 Free Software Foundation, Inc.
+
+timestamp='2012-02-10'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted GNU ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray | -microblaze)
+		os=
+		basic_machine=$1
+		;;
+	-bluegene*)
+		os=-cnk
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+	-chorusrdb)
+		os=-chorusrdb
+		basic_machine=$1
+		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| aarch64 | aarch64_be \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+        | be32 | be64 \
+	| bfin \
+	| c4x | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| epiphany \
+	| fido | fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| le32 | le64 \
+	| lm32 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore | mep | metag \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64octeon | mips64octeonel \
+	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| moxie \
+	| mt \
+	| msp430 \
+	| nds32 | nds32le | nds32be \
+	| nios | nios2 \
+	| ns16k | ns32k \
+	| open8 \
+	| or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle \
+	| pyramid \
+	| rl78 | rx \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu \
+	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+	| ubicom32 \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+	| we32k \
+	| x86 | xc16x | xstormy16 | xtensa \
+	| z8k | z80)
+		basic_machine=$basic_machine-unknown
+		;;
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
+
+	strongarm | thumb | xscale)
+		basic_machine=arm-unknown
+		;;
+	xgate)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	xscaleeb)
+		basic_machine=armeb-unknown
+		;;
+
+	xscaleel)
+		basic_machine=armel-unknown
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| aarch64-* | aarch64_be-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* | avr32-* \
+	| be32-* | be64-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
+	| clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| le32-* | le64-* \
+	| lm32-* \
+	| m32c-* | m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64octeon-* | mips64octeonel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| mt-* \
+	| msp430-* \
+	| nds32-* | nds32le-* | nds32be-* \
+	| nios-* | nios2-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| open8-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+	| pyramid-* \
+	| rl78-* | romp-* | rs6000-* | rx-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+	| tahoe-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile*-* \
+	| tron-* \
+	| ubicom32-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* \
+	| xstormy16-* | xtensa*-* \
+	| ymp-* \
+	| z8k-* | z80-*)
+		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
+	c54x-*)
+		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16 | cr16-*)
+		basic_machine=cr16-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	microblaze)
+		basic_machine=microblaze-xilinx
+		;;
+	mingw32)
+		basic_machine=i386-pc
+		os=-mingw32
+		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
+	msys)
+		basic_machine=i386-pc
+		os=-msys
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	neo-tandem)
+		basic_machine=neo-tandem
+		;;
+	nse-tandem)
+		basic_machine=nse-tandem
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc | ppcbe)	basic_machine=powerpc-unknown
+		;;
+	ppc-* | ppcbe-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rdos)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	strongarm-* | thumb-*)
+		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tile*)
+		basic_machine=$basic_machine-unknown
+		os=-linux-gnu
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	xscale-* | xscalee[bl]-*)
+		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+	# First match some system type aliases
+	# that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-auroraux)
+		os=-auroraux
+		;;
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+	      | -sym* | -kopensolaris* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* | -aros* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -openbsd* | -solidbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* | -cegcc* \
+	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-kaos*)
+		os=-kaos
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-dicos*)
+		os=-dicos
+		;;
+	-nacl*)
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	score-*)
+		os=-elf
+		;;
+	spu-*)
+		os=-elf
+		;;
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+	c4x-* | tic4x-*)
+		os=-coff
+		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mep-*)
+		os=-elf
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-haiku)
+		os=-haiku
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-cnk*|-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/autoconf/configure.ac b/autoconf/configure.ac
new file mode 100644
index 0000000..46b6563
--- /dev/null
+++ b/autoconf/configure.ac
@@ -0,0 +1,108 @@
+
+#-----------------------------------------------------------------------
+# Supports the following non-standard switches.
+#
+#   --enable-threadsafe
+#   --enable-readline
+#   --enable-dynamic-extensions
+#
+
+AC_PREREQ(2.61)
+AC_INIT(sqlite, 3.7.5, http://www.sqlite.org)
+AC_CONFIG_SRCDIR([sqlite3.c])
+
+# Use automake.
+AM_INIT_AUTOMAKE([foreign])
+
+AC_SYS_LARGEFILE
+
+# Check for required programs.
+AC_PROG_CC
+AC_PROG_RANLIB
+AC_PROG_LIBTOOL
+AC_PROG_MKDIR_P
+
+# Check for library functions that SQLite can optionally use.
+AC_CHECK_FUNCS([fdatasync usleep fullfsync localtime_r gmtime_r])
+AC_FUNC_STRERROR_R
+
+AC_CONFIG_FILES([Makefile sqlite3.pc])
+AC_SUBST(BUILD_CFLAGS)
+
+#-----------------------------------------------------------------------
+#   --enable-readline
+#
+AC_ARG_ENABLE(readline, [AS_HELP_STRING(
+  [--enable-readline], 
+  [use readline in shell tool (yes, no) [default=yes]])], 
+  [], [enable_readline=yes])
+if test x"$enable_readline" != xno ; then
+  sLIBS=$LIBS
+  LIBS=""
+  AC_SEARCH_LIBS(tgetent, curses ncurses ncursesw, [], [])
+  AC_SEARCH_LIBS(readline, readline, [], [enable_readline=no])
+  AC_CHECK_FUNCS(readline, [], [])
+  READLINE_LIBS=$LIBS
+  LIBS=$sLIBS
+fi
+AC_SUBST(READLINE_LIBS)
+#-----------------------------------------------------------------------
+
+#-----------------------------------------------------------------------
+#   --enable-threadsafe
+#
+AC_ARG_ENABLE(threadsafe, [AS_HELP_STRING(
+  [--enable-threadsafe], [build a thread-safe library [default=yes]])], 
+  [], [enable_threadsafe=yes])
+THREADSAFE_FLAGS=-DSQLITE_THREADSAFE=0
+if test x"$enable_threadsafe" != "xno"; then
+  THREADSAFE_FLAGS="-D_REENTRANT=1 -DSQLITE_THREADSAFE=1"
+  AC_SEARCH_LIBS(pthread_create, pthread)
+fi
+AC_SUBST(THREADSAFE_FLAGS)
+#-----------------------------------------------------------------------
+
+#-----------------------------------------------------------------------
+#   --enable-dynamic-extensions
+#
+AC_ARG_ENABLE(dynamic-extensions, [AS_HELP_STRING(
+  [--enable-dynamic-extensions], [support loadable extensions [default=yes]])], 
+  [], [enable_dynamic_extensions=yes])
+if test x"$enable_dynamic_extensions" != "xno"; then
+  AC_SEARCH_LIBS(dlopen, dl)
+else
+  DYNAMIC_EXTENSION_FLAGS=-DSQLITE_OMIT_LOAD_EXTENSION=1
+fi
+AC_MSG_CHECKING([for whether to support dynamic extensions])
+AC_MSG_RESULT($enable_dynamic_extensions)
+AC_SUBST(DYNAMIC_EXTENSION_FLAGS)
+#-----------------------------------------------------------------------
+
+AC_CHECK_FUNCS(posix_fallocate)
+
+#-----------------------------------------------------------------------
+# UPDATE: Maybe it's better if users just set CFLAGS before invoking
+# configure. This option doesn't really add much...
+#
+#   --enable-tempstore
+#
+# AC_ARG_ENABLE(tempstore, [AS_HELP_STRING(
+#   [--enable-tempstore], 
+#   [in-memory temporary tables (never, no, yes, always) [default=no]])], 
+#   [], [enable_tempstore=no])
+# AC_MSG_CHECKING([for whether or not to store temp tables in-memory])
+# case "$enable_tempstore" in
+#   never )  TEMP_STORE=0 ;;
+#   no )     TEMP_STORE=1 ;;
+#   always ) TEMP_STORE=3 ;;
+#   yes )    TEMP_STORE=3 ;;
+#   * )
+#     TEMP_STORE=1
+#     enable_tempstore=yes
+#   ;;
+# esac
+# AC_MSG_RESULT($enable_tempstore)
+# AC_SUBST(TEMP_STORE)
+#-----------------------------------------------------------------------
+
+AC_OUTPUT
diff --git a/autoconf/depcomp b/autoconf/depcomp
new file mode 100755
index 0000000..25a39e6
--- /dev/null
+++ b/autoconf/depcomp
@@ -0,0 +1,708 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2012-03-27.16; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
+# 2011, 2012 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by 'PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputting dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+   # This is just like msvisualcpp but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u='sed s,\\\\,/,g'
+   depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+   # This is just like msvc7 but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u='sed s,\\\\,/,g'
+   depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+   # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
+   gccflag=-qmakedep=gcc,-MF
+   depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' "$nl" < "$tmpdepfile" |
+## Some versions of gcc put a space before the ':'.  On the theory
+## that the space means something, we add a space to the output as
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+      | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like '#:fec' to the end of the
+    # dependency line.
+    tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr "$nl" ' ' >> "$depfile"
+    echo >> "$depfile"
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' "$nl" < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # '$object: dependent.h' and one to simply 'dependent.h:'.
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
+  # However on
+  #    $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\':
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  # tcc 0.9.26 (FIXME still under development at the moment of writing)
+  # will emit a similar output, but also prepend the continuation lines
+  # with horizontal tabulation characters.
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form 'foo.o: dependent.h',
+  # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # '$object: dependent.h' and one to simply 'dependent.h:'.
+  sed -e "s/^[ $tab][ $tab]*/  /" -e "s,^[^:]*:,$object :," \
+    < "$tmpdepfile" > "$depfile"
+  sed '
+    s/[ '"$tab"'][ '"$tab"']*/ /g
+    s/^ *//
+    s/ *\\*$//
+    s/^[^:]*: *//
+    /^$/d
+    /:$/d
+    s/$/ :/
+  ' < "$tmpdepfile" >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add 'dependent.h:' lines.
+    sed -ne '2,${
+	       s/^ *//
+	       s/ \\*$//
+	       s/$/:/
+	       p
+	     }' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in 'foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mechanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+      exit $stat
+   fi
+
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test "$stat" = 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/'"$tab"'/
+  G
+  p
+}' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for ':'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' "$nl" < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/autoconf/install-sh b/autoconf/install-sh
new file mode 100755
index 0000000..a9244eb
--- /dev/null
+++ b/autoconf/install-sh
@@ -0,0 +1,527 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-01-19.21; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+	shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
+
+    -o) chowncmd="$chownprog $2"
+	shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t) dst_arg=$2
+	# Protect names problematic for `test' and other utilities.
+	case $dst_arg in
+	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+	esac
+	shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for `test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for `test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	[-=\(\)!]*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test X"$d" = X && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/autoconf/ltmain.sh b/autoconf/ltmain.sh
new file mode 100644
index 0000000..6a2f116
--- /dev/null
+++ b/autoconf/ltmain.sh
@@ -0,0 +1,9655 @@
+
+# libtool (GNU libtool) 2.4.2
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+#       --config             show all configuration variables
+#       --debug              enable verbose shell tracing
+#   -n, --dry-run            display commands without modifying any files
+#       --features           display basic configuration information and exit
+#       --mode=MODE          use operation mode MODE
+#       --preserve-dup-deps  don't remove duplicate dependency libraries
+#       --quiet, --silent    don't print informational messages
+#       --no-quiet, --no-silent
+#                            print informational messages (default)
+#       --no-warn            don't display warning messages
+#       --tag=TAG            use configuration variables from tag TAG
+#   -v, --verbose            print more informational messages than default
+#       --no-verbose         don't print the extra informational messages
+#       --version            print version information
+#   -h, --help, --help-all   print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+#         clean              remove files from the build directory
+#         compile            compile a source file into a libtool object
+#         execute            automatically set library path, then run a program
+#         finish             complete the installation of libtool libraries
+#         install            install libraries or executables
+#         link               create a library or an executable
+#         uninstall          remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.  When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#         host-triplet:	$host
+#         shell:		$SHELL
+#         compiler:		$LTCC
+#         compiler flags:		$LTCFLAGS
+#         linker:		$LD (gnu? $with_gnu_ld)
+#         $progname:	(GNU libtool) 2.4.2
+#         automake:	$automake_version
+#         autoconf:	$autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.2
+TIMESTAMP=""
+package_revision=1.3337
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+          save_$lt_var=\$$lt_var
+          $lt_var=C
+	  export $lt_var
+	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+	fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+    # Extract subdirectory from the argument.
+    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+    case ${2} in
+      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+		s@/\./@/@g
+		t dotsl
+		s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+#             value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+  # Start from root dir and reassemble the path.
+  func_normal_abspath_result=
+  func_normal_abspath_tpath=$1
+  func_normal_abspath_altnamespace=
+  case $func_normal_abspath_tpath in
+    "")
+      # Empty path, that just means $cwd.
+      func_stripname '' '/' "`pwd`"
+      func_normal_abspath_result=$func_stripname_result
+      return
+    ;;
+    # The next three entries are used to spot a run of precisely
+    # two leading slashes without using negated character classes;
+    # we take advantage of case's first-match behaviour.
+    ///*)
+      # Unusual form of absolute path, do nothing.
+    ;;
+    //*)
+      # Not necessarily an ordinary path; POSIX reserves leading '//'
+      # and for example Cygwin uses it to access remote file shares
+      # over CIFS/SMB, so we conserve a leading double slash if found.
+      func_normal_abspath_altnamespace=/
+    ;;
+    /*)
+      # Absolute path, do nothing.
+    ;;
+    *)
+      # Relative path, prepend $cwd.
+      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+    ;;
+  esac
+  # Cancel out all the simple stuff to save iterations.  We also want
+  # the path to end with a slash for ease of parsing, so make sure
+  # there is one (and only one) here.
+  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+  while :; do
+    # Processed it all yet?
+    if test "$func_normal_abspath_tpath" = / ; then
+      # If we ascended to the root using ".." the result may be empty now.
+      if test -z "$func_normal_abspath_result" ; then
+        func_normal_abspath_result=/
+      fi
+      break
+    fi
+    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcar"`
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcdr"`
+    # Figure out what to do with it
+    case $func_normal_abspath_tcomponent in
+      "")
+        # Trailing empty path component, ignore it.
+      ;;
+      ..)
+        # Parent dir; strip last assembled component from result.
+        func_dirname "$func_normal_abspath_result"
+        func_normal_abspath_result=$func_dirname_result
+      ;;
+      *)
+        # Actual path component, append it.
+        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+      ;;
+    esac
+  done
+  # Restore leading double-slash if one was found on entry.
+  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+#             value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+  func_relative_path_result=
+  func_normal_abspath "$1"
+  func_relative_path_tlibdir=$func_normal_abspath_result
+  func_normal_abspath "$2"
+  func_relative_path_tbindir=$func_normal_abspath_result
+
+  # Ascend the tree starting from libdir
+  while :; do
+    # check if we have found a prefix of bindir
+    case $func_relative_path_tbindir in
+      $func_relative_path_tlibdir)
+        # found an exact match
+        func_relative_path_tcancelled=
+        break
+        ;;
+      $func_relative_path_tlibdir*)
+        # found a matching prefix
+        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+        func_relative_path_tcancelled=$func_stripname_result
+        if test -z "$func_relative_path_result"; then
+          func_relative_path_result=.
+        fi
+        break
+        ;;
+      *)
+        func_dirname $func_relative_path_tlibdir
+        func_relative_path_tlibdir=${func_dirname_result}
+        if test "x$func_relative_path_tlibdir" = x ; then
+          # Have to descend all the way to the root!
+          func_relative_path_result=../$func_relative_path_result
+          func_relative_path_tcancelled=$func_relative_path_tbindir
+          break
+        fi
+        func_relative_path_result=../$func_relative_path_result
+        ;;
+    esac
+  done
+
+  # Now calculate path; take care to avoid doubling-up slashes.
+  func_stripname '' '/' "$func_relative_path_result"
+  func_relative_path_result=$func_stripname_result
+  func_stripname '/' '/' "$func_relative_path_tcancelled"
+  if test "x$func_stripname_result" != x ; then
+    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+  fi
+
+  # Normalisation. If bindir is libdir, return empty string,
+  # else relative path ending with a slash; either way, target
+  # file name can be directly appended.
+  if test ! -z "$func_relative_path_result"; then
+    func_stripname './' '' "$func_relative_path_result/"
+    func_relative_path_result=$func_stripname_result
+  fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=$func_dirname_result
+     progdir=`cd "$progdir" && pwd`
+     progpath="$progdir/$progname"
+     ;;
+  *)
+     save_IFS="$IFS"
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS="$save_IFS"
+       test -x "$progdir/$progname" && break
+     done
+     IFS="$save_IFS"
+     test -n "$progdir" || progdir=`pwd`
+     progpath="$progdir/$progname"
+     ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+  s/$bs4/&\\
+/g
+  s/^$bs2$dollar/$bs&/
+  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+  s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $opt_verbose && func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+    # bash bug again:
+    :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    func_error ${1+"$@"}
+    func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    my_directory_path="$1"
+    my_dir_list=
+
+    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+      # Protect directory names starting with `-'
+      case $my_directory_path in
+        -*) my_directory_path="./$my_directory_path" ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$my_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        my_dir_list="$my_directory_path:$my_dir_list"
+
+        # If the last portion added has no slash in it, the list is done
+        case $my_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+      done
+      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+      save_mkdir_p_IFS="$IFS"; IFS=':'
+      for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+        # mkdir can fail with a `File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$my_dir" 2>/dev/null || :
+      done
+      IFS="$save_mkdir_p_IFS"
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$my_directory_path" || \
+        func_fatal_error "Failed to create \`$1'"
+    fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$opt_dry_run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+        save_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$my_tmpdir"
+        umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || \
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+    fi
+
+    $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+    case $1 in
+      *[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+      *)
+        func_quote_for_eval_unquoted_result="$1" ;;
+    esac
+
+    case $func_quote_for_eval_unquoted_result in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+        ;;
+      *)
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+    esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    case $1 in
+      *[\\\`\"]*)
+	my_arg=`$ECHO "$1" | $SED \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        my_arg="$1" ;;
+    esac
+
+    case $my_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        my_arg="\"$my_arg\""
+        ;;
+    esac
+
+    func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$lt_user_locale
+	    $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+  case $1 in
+  [0-9]* | *[!a-zA-Z0-9_]*)
+    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+    ;;
+  * )
+    func_tr_sh_result=$1
+    ;;
+  esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $opt_debug
+
+    $SED -n '/(C)/!b go
+	:more
+	/\./!{
+	  N
+	  s/\n# / /
+	  b more
+	}
+	:go
+	/^# '$PROGRAM' (GNU /,/# warranty; / {
+        s/^# //
+	s/^# *$//
+        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+        p
+     }' < "$progpath"
+     exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+        s/^# //
+	s/^# *$//
+	s/\$progname/'$progname'/
+	p
+    }' < "$progpath"
+    echo
+    $ECHO "run \`$progname --help | more' for full usage"
+    exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/# Report bugs to/ {
+	:print
+        s/^# //
+	s/^# *$//
+	s*\$progname*'$progname'*
+	s*\$host*'"$host"'*
+	s*\$SHELL*'"$SHELL"'*
+	s*\$LTCC*'"$LTCC"'*
+	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+	s*\$LD*'"$LD"'*
+	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+	p
+	d
+     }
+     /^# .* home page:/b print
+     /^# General help using/b print
+     ' < "$progpath"
+    ret=$?
+    if test -z "$1"; then
+      exit $ret
+    fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    $opt_debug
+
+    func_error "missing argument for $1."
+    exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+    my_sed_long_arg='1s/^--[^=]*=//'
+
+    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+    eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+    func_quote_for_eval "${2}"
+    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+    func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+    func_error ${1+"$@"}
+    func_error "See the $PACKAGE documentation for more information."
+    func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
+
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+    done
+
+    exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+
+    exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+  # Global variable:
+  tagname="$1"
+
+  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+  sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+  # Validate tagname.
+  case $tagname in
+    *[!-_A-Za-z0-9,/]*)
+      func_fatal_error "invalid tag name: $tagname"
+      ;;
+  esac
+
+  # Don't test for the "default" C tag, as we know it's
+  # there but not specially marked.
+  case $tagname in
+    CC) ;;
+    *)
+      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	taglist="$taglist $tagname"
+
+	# Evaluate the configuration.  Be careful to quote the path
+	# and the sed script, to avoid splitting on whitespace, but
+	# also don't use non-portable quotes within backquotes within
+	# quotes we have to do it in 2 steps:
+	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	eval "$extractedcf"
+      else
+	func_error "ignoring unknown tag $tagname"
+      fi
+      ;;
+  esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      fi
+    else
+      cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+    fi
+
+    exit $EXIT_MISMATCH
+  fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+  shift; set dummy --mode clean ${1+"$@"}; shift
+  ;;
+compile|compil|compi|comp|com|co|c)
+  shift; set dummy --mode compile ${1+"$@"}; shift
+  ;;
+execute|execut|execu|exec|exe|ex|e)
+  shift; set dummy --mode execute ${1+"$@"}; shift
+  ;;
+finish|finis|fini|fin|fi|f)
+  shift; set dummy --mode finish ${1+"$@"}; shift
+  ;;
+install|instal|insta|inst|ins|in|i)
+  shift; set dummy --mode install ${1+"$@"}; shift
+  ;;
+link|lin|li|l)
+  shift; set dummy --mode link ${1+"$@"}; shift
+  ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+  shift; set dummy --mode uninstall ${1+"$@"}; shift
+  ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly.  This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+  # this just eases exit handling
+  while test $# -gt 0; do
+    opt="$1"
+    shift
+    case $opt in
+      --debug|-x)	opt_debug='set -x'
+			func_echo "enabling shell trace mode"
+			$opt_debug
+			;;
+      --dry-run|--dryrun|-n)
+			opt_dry_run=:
+			;;
+      --config)
+			opt_config=:
+func_config
+			;;
+      --dlopen|-dlopen)
+			optarg="$1"
+			opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+			shift
+			;;
+      --preserve-dup-deps)
+			opt_preserve_dup_deps=:
+			;;
+      --features)
+			opt_features=:
+func_features
+			;;
+      --finish)
+			opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+			;;
+      --help)
+			opt_help=:
+			;;
+      --help-all)
+			opt_help_all=:
+opt_help=': help-all'
+			;;
+      --mode)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_mode="$optarg"
+case $optarg in
+  # Valid mode arguments:
+  clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+  # Catch anything else as an error
+  *) func_error "invalid argument for $opt"
+     exit_cmd=exit
+     break
+     ;;
+esac
+			shift
+			;;
+      --no-silent|--no-quiet)
+			opt_silent=false
+func_append preserve_args " $opt"
+			;;
+      --no-warning|--no-warn)
+			opt_warning=false
+func_append preserve_args " $opt"
+			;;
+      --no-verbose)
+			opt_verbose=false
+func_append preserve_args " $opt"
+			;;
+      --silent|--quiet)
+			opt_silent=:
+func_append preserve_args " $opt"
+        opt_verbose=false
+			;;
+      --verbose|-v)
+			opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+			;;
+      --tag)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+			shift
+			;;
+
+      -\?|-h)		func_usage				;;
+      --help)		func_help				;;
+      --version)	func_version				;;
+
+      # Separate optargs to long options:
+      --*=*)
+			func_split_long_opt "$opt"
+			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      # Separate non-argument short options:
+      -\?*|-h*|-n*|-v*)
+			func_split_short_opt "$opt"
+			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      --)		break					;;
+      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
+      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
+    esac
+  done
+
+  # Validate options:
+
+  # save first non-option argument
+  if test "$#" -gt 0; then
+    nonopt="$opt"
+    shift
+  fi
+
+  # preserve --debug
+  test "$opt_debug" = : || func_append preserve_args " --debug"
+
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
+      ;;
+    *)
+      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+      ;;
+  esac
+
+  $opt_help || {
+    # Sanity checks first:
+    func_check_version_match
+
+    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+      func_fatal_configuration "not configured to build any kind of library"
+    fi
+
+    # Darwin sucks
+    eval std_shrext=\"$shrext_cmds\"
+
+    # Only execute mode is allowed to have -dlopen flags.
+    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+      func_error "unrecognized option \`-dlopen'"
+      $ECHO "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Change the help message to a mode-specific one.
+    generic_help="$help"
+    help="Try \`$progname --help --mode=$opt_mode' for more information."
+  }
+
+
+  # Bail if the options were screwed
+  $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case "$lalib_p_line" in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_dirname_and_basename "$1" "" "."
+    func_stripname '' '.exe' "$func_basename_result"
+    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $opt_debug
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$save_ifs
+      eval cmd=\"$cmd\"
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $opt_debug
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot.  Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+  func_resolve_sysroot_result=$1
+  case $func_resolve_sysroot_result in
+  =*)
+    func_stripname '=' '' "$func_resolve_sysroot_result"
+    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+    ;;
+  esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+  case "$lt_sysroot:$1" in
+  ?*:"$lt_sysroot"*)
+    func_stripname "$lt_sysroot" '' "$1"
+    func_replace_sysroot_result="=$func_stripname_result"
+    ;;
+  *)
+    # Including no sysroot.
+    func_replace_sysroot_result=$1
+    ;;
+  esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $opt_debug
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	func_append_quoted CC_quoted "$arg"
+      done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_append_quoted CC_quoted "$arg"
+	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
+	    case "$@ " in
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with \`--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=${1}
+    if test "$build_libtool_libs" = yes; then
+      write_lobj=\'${2}\'
+    else
+      write_lobj=none
+    fi
+
+    if test "$build_old_libs" = yes; then
+      write_oldobj=\'${3}\'
+    else
+      write_oldobj=none
+    fi
+
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+      $MV "${write_libobj}T" "${write_libobj}"
+    }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+  $opt_debug
+  func_convert_core_file_wine_to_w32_result="$1"
+  if test -n "$1"; then
+    # Unfortunately, winepath does not exit with a non-zero error code, so we
+    # are forced to check the contents of stdout. On the other hand, if the
+    # command is not found, the shell will set an exit code of 127 and print
+    # *an error message* to stdout. So we must check for both error code of
+    # zero AND non-empty stdout, which explains the odd construction:
+    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+        $SED -e "$lt_sed_naive_backslashify"`
+    else
+      func_convert_core_file_wine_to_w32_result=
+    fi
+  fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+  $opt_debug
+  # unfortunately, winepath doesn't convert paths, only file names
+  func_convert_core_path_wine_to_w32_result=""
+  if test -n "$1"; then
+    oldIFS=$IFS
+    IFS=:
+    for func_convert_core_path_wine_to_w32_f in $1; do
+      IFS=$oldIFS
+      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+        if test -z "$func_convert_core_path_wine_to_w32_result"; then
+          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+        else
+          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+        fi
+      fi
+    done
+    IFS=$oldIFS
+  fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+  $opt_debug
+  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+    if test "$?" -ne 0; then
+      # on failure, ensure result is empty
+      func_cygpath_result=
+    fi
+  else
+    func_cygpath_result=
+    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+  fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format.  Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+  $opt_debug
+  # awkward: cmd appends spaces to result
+  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+  $opt_debug
+  if test -z "$2" && test -n "$1" ; then
+    func_error "Could not determine host file name corresponding to"
+    func_error "  \`$1'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback:
+    func_to_host_file_result="$1"
+  fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+  $opt_debug
+  if test -z "$4" && test -n "$3"; then
+    func_error "Could not determine the host path corresponding to"
+    func_error "  \`$3'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback.  This is a deliberately simplistic "conversion" and
+    # should not be "improved".  See libtool.info.
+    if test "x$1" != "x$2"; then
+      lt_replace_pathsep_chars="s|$1|$2|g"
+      func_to_host_path_result=`echo "$3" |
+        $SED -e "$lt_replace_pathsep_chars"`
+    else
+      func_to_host_path_result="$3"
+    fi
+  fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+  $opt_debug
+  case $4 in
+  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+    ;;
+  esac
+  case $4 in
+  $2 ) func_append func_to_host_path_result "$3"
+    ;;
+  esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+  $opt_debug
+  $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result.  If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+  $opt_debug
+  case ,$2, in
+    *,"$to_tool_file_cmd",*)
+      func_to_tool_file_result=$1
+      ;;
+    *)
+      $to_tool_file_cmd "$1"
+      func_to_tool_file_result=$func_to_host_file_result
+      ;;
+  esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+  func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+    # LT_CYGPATH in this case.
+    func_to_host_file_result=`cygpath -m "$1"`
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format.  Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_file_wine_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+    func_convert_core_file_wine_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format.  If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+#   file name conversion function    : func_convert_file_X_to_Y ()
+#   path conversion function         : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same.  If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+  $opt_debug
+  if test -z "$to_host_path_cmd"; then
+    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+    to_host_path_cmd="func_convert_path_${func_stripname_result}"
+  fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+  $opt_debug
+  func_init_to_host_path_cmd
+  $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+  func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from ARG.  MSYS
+    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+    # and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format.  Requires a wine environment and
+# a working winepath.  Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from
+    # ARG. msys behavior is inconsistent here, cygpath turns them
+    # into '.;' and ';.', and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $opt_debug
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+    pie_flag=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg="$arg"
+	arg_mode=normal
+	;;
+
+      target )
+	libobj="$arg"
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify \`-o' more than once"
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-pie | -fpie | -fPIE)
+          func_append pie_flag " $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
+	  func_append later " $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
+	  lastarg=
+	  save_ifs="$IFS"; IFS=','
+	  for arg in $args; do
+	    IFS="$save_ifs"
+	    func_append_quoted lastarg "$arg"
+	  done
+	  IFS="$save_ifs"
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
+
+	  # Add the arguments to base_compile.
+	  func_append base_compile " $lastarg"
+	  continue
+	  ;;
+
+	*)
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg="$srcfile"
+	  srcfile="$arg"
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      func_append_quoted base_compile "$lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      func_fatal_error "you must specify an argument for -Xcompile"
+      ;;
+    target)
+      func_fatal_error "you must specify a target with \`-o'"
+      ;;
+    *)
+      # Get the name of the library object.
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj="$func_basename_result"
+      }
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    case $libobj in
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
+    esac
+
+    case $libobj in
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+    *)
+      func_fatal_error "cannot determine name of library object from \`$libobj'"
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
+      -static)
+	build_libtool_libs=no
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name \`$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname="$func_basename_result"
+    xdir="$func_dirname_result"
+    lobj=${xdir}$objdir/$objname
+
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
+      pic_mode=default
+      ;;
+    esac
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	$ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+      func_append removelist " $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
+    fi
+
+    $opt_dry_run || $RM $removelist
+    func_append removelist " $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+    srcfile=$func_to_tool_file_result
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      func_mkdir_p "$xdir$objdir"
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	func_append command " -o $lobj"
+      fi
+
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+
+      # Allow error messages only from the first compilation.
+      if test "$suppress_opt" = yes; then
+	suppress_output=' >/dev/null 2>&1'
+      fi
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile$pie_flag"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test "$compiler_c_o" = yes; then
+	func_append command " -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      func_append command "$suppress_output"
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test "$need_locks" != no; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $opt_mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
+  -shared           do not build a \`.o' file suitable for static linking
+  -static           only build a \`.o' file suitable for static linking
+  -Wc,FLAG          pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode \`$opt_mode'"
+        ;;
+    esac
+
+    echo
+    $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test "$opt_help" = :; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    sed '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $opt_debug
+    # The first argument is the command name.
+    cmd="$nonopt"
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $opt_dlopen; do
+      test -f "$file" \
+	|| func_fatal_help "\`$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  func_append dir "/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	  fi
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+	;;
+
+      *)
+	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -* | *.la | *.lo ) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_append_quoted args "$file"
+    done
+
+    if test "X$opt_dry_run" = Xfalse; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $opt_debug
+    libs=
+    libdirs=
+    admincmds=
+
+    for opt in "$nonopt" ${1+"$@"}
+    do
+      if test -d "$opt"; then
+	func_append libdirs " $opt"
+
+      elif test -f "$opt"; then
+	if func_lalib_unsafe_p "$opt"; then
+	  func_append libs " $opt"
+	else
+	  func_warning "\`$opt' is not a valid libtool archive"
+	fi
+
+      else
+	func_fatal_error "invalid argument \`$opt'"
+      fi
+    done
+
+    if test -n "$libs"; then
+      if test -n "$lt_sysroot"; then
+        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+      else
+        sysroot_cmd=
+      fi
+
+      # Remove sysroot references
+      if $opt_dry_run; then
+        for lib in $libs; do
+          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+        done
+      else
+        tmpdir=`func_mktempdir`
+        for lib in $libs; do
+	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	    > $tmpdir/tmp-la
+	  mv -f $tmpdir/tmp-la $lib
+	done
+        ${RM}r "$tmpdir"
+      fi
+    fi
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || func_append admincmds "
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    $opt_silent && exit $EXIT_SUCCESS
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      echo "----------------------------------------------------------------------"
+      echo "Libraries have been installed in:"
+      for libdir in $libdirs; do
+	$ECHO "   $libdir"
+      done
+      echo
+      echo "If you ever happen to want to link against installed libraries"
+      echo "in a given directory, LIBDIR, you must either use libtool, and"
+      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+      echo "flag during linking and do at least one of the following:"
+      if test -n "$shlibpath_var"; then
+	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+	echo "     during execution"
+      fi
+      if test -n "$runpath_var"; then
+	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+	echo "     during linking"
+      fi
+      if test -n "$hardcode_libdir_flag_spec"; then
+	libdir=LIBDIR
+	eval flag=\"$hardcode_libdir_flag_spec\"
+
+	$ECHO "   - use the \`$flag' linker flag"
+      fi
+      if test -n "$admincmds"; then
+	$ECHO "   - have your system administrator run these commands:$admincmds"
+      fi
+      if test -f /etc/ld.so.conf; then
+	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+      fi
+      echo
+
+      echo "See any operating system documentation about shared libraries for"
+      case $host in
+	solaris2.[6789]|solaris2.1[0-9])
+	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	  echo "pages."
+	  ;;
+	*)
+	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
+	  ;;
+      esac
+      echo "----------------------------------------------------------------------"
+    fi
+    exit $EXIT_SUCCESS
+}
+
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $opt_debug
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       case $nonopt in *shtool*) :;; *) false;; esac; then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    func_append install_prog "$func_quote_for_eval_result"
+    install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    no_mode=:
+    for arg
+    do
+      arg2=
+      if test -n "$dest"; then
+	func_append files " $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f)
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
+	    arg2=$install_override_mode
+	    no_mode=false
+	  fi
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      func_append install_prog " $func_quote_for_eval_result"
+      if test -n "$arg2"; then
+	func_quote_for_eval "$arg2"
+      fi
+      func_append install_shared_prog " $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prev' option requires an argument"
+
+    if test -n "$install_override_mode" && $no_mode; then
+      if $install_cp; then :; else
+	func_quote_for_eval "$install_override_mode"
+	func_append install_shared_prog " -m $func_quote_for_eval_result"
+      fi
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir="$func_dirname_result"
+      destname="$func_basename_result"
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "\`$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	func_append staticlibs " $file"
+	;;
+
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append current_libdirs " $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append future_libdirs " $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir="$func_dirname_result"
+	func_append dir "$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking \`$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname="$1"
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme="$stripme"
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=""
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name="$func_basename_result"
+	instname="$dir/$name"i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "\`$lib' has not been installed in \`$libdir'"
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if test "$finalize" = yes; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file="$func_basename_result"
+	        outputname="$tmpdir/$file"
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_silent || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink \`$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file="$outputname"
+	      else
+	        func_warning "cannot relink \`$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name="$func_basename_result"
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $opt_debug
+    my_outputname="$1"
+    my_originator="$2"
+    my_pic_p="${3-no}"
+    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms="${my_outputname}S.c"
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist="$output_objdir/${my_outputname}.nm"
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test "$dlself" = yes; then
+	  func_verbose "generating symbol list for \`$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols="$output_objdir/$outputname.exp"
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin* | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_basename "$dlprefile"
+	  name="$func_basename_result"
+          case $host in
+	    *cygwin* | *mingw* | *cegcc* )
+	      # if an import library, we need to obtain dlname
+	      if func_win32_import_lib_p "$dlprefile"; then
+	        func_tr_sh "$dlprefile"
+	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
+	        dlprefile_dlbasename=""
+	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+	          # Use subshell, to avoid clobbering current variable values
+	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+	          if test -n "$dlprefile_dlname" ; then
+	            func_basename "$dlprefile_dlname"
+	            dlprefile_dlbasename="$func_basename_result"
+	          else
+	            # no lafile. user explicitly requested -dlpreopen <import library>.
+	            $sharedlib_from_linklib_cmd "$dlprefile"
+	            dlprefile_dlbasename=$sharedlib_from_linklib_result
+	          fi
+	        fi
+	        $opt_dry_run || {
+	          if test -n "$dlprefile_dlbasename" ; then
+	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+	          else
+	            func_warning "Could not compute DLL name from $name"
+	            eval '$ECHO ": $name " >> "$nlist"'
+	          fi
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+	        }
+	      else # not an import lib
+	        $opt_dry_run || {
+	          eval '$ECHO ": $name " >> "$nlist"'
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	        }
+	      fi
+	    ;;
+	    *)
+	      $opt_dry_run || {
+	        eval '$ECHO ": $name " >> "$nlist"'
+	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	      }
+	    ;;
+          esac
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+  { \"$my_originator\", (void *) 0 },"
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  echo >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    if test "X$my_pic_p" != Xno; then
+	      pic_flag_for_symtable=" $pic_flag"
+	    fi
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) func_append symtab_cflags " $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+  $opt_debug
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+      func_to_tool_file "$1" func_convert_file_msys_to_w32
+      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	$SED -n -e '
+	    1,100{
+		/ I /{
+		    s,.*,import,
+		    p
+		    q
+		}
+	    }'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+  $opt_debug
+  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+  $opt_debug
+  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+    $SED '/^Contents of section '"$match_literal"':/{
+      # Place marker at beginning of archive member dllname section
+      s/.*/====MARK====/
+      p
+      d
+    }
+    # These lines can sometimes be longer than 43 characters, but
+    # are always uninteresting
+    /:[	 ]*file format pe[i]\{,1\}-/d
+    /^In archive [^:]*:/d
+    # Ensure marker is printed
+    /^====MARK====/p
+    # Remove all lines with less than 43 characters
+    /^.\{43\}/!d
+    # From remaining lines, remove first 43 characters
+    s/^.\{43\}//' |
+    $SED -n '
+      # Join marker and all lines until next marker into a single line
+      /^====MARK====/ b para
+      H
+      $ b para
+      b
+      :para
+      x
+      s/\n//g
+      # Remove the marker
+      s/^====MARK====//
+      # Remove trailing dots and whitespace
+      s/[\. \t]*$//
+      # Print
+      /./p' |
+    # we now have a list, one entry per line, of the stringified
+    # contents of the appropriate section of all members of the
+    # archive which possess that section. Heuristic: eliminate
+    # all those which have a first or second character that is
+    # a '.' (that is, objdump's representation of an unprintable
+    # character.) This should work for all archives with less than
+    # 0x302f exports -- but will fail for DLLs whose name actually
+    # begins with a literal '.' or a single character followed by
+    # a '.'.
+    #
+    # Of those that remain, print the first one.
+    $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+  $opt_debug
+  if func_cygming_gnu_implib_p "$1" ; then
+    # binutils import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+  elif func_cygming_ms_implib_p "$1" ; then
+    # ms-generated import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+  else
+    # unknown
+    sharedlib_from_linklib_result=""
+  fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $opt_debug
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    if test "$lock_old_archive_extraction" = yes; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test "$lock_old_archive_extraction" = yes; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $opt_debug
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib="$func_basename_result"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`basename "$darwin_archive"`
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+    done
+
+    func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=${1-no}
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    file=\"\$0\""
+
+    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=\"$qECHO\"
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+  done
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# fixup the dll searchpath if we need to.
+	#
+	# Fix the DLL searchpath if we need to.  Do this before prepending
+	# to shlibpath, because on Windows, both are PATH and uninstalled
+	# libraries must come first.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+      func_exec_program \${1+\"\$@\"}
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+*/
+EOF
+	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+#  define _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+	    cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_path "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_path "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test "$fast_install" = yes; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  intptr_t rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  newargz = XMALLOC (char *, argc + 1);
+
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strcmp (argv[i], dumpscript_opt) == 0)
+	{
+EOF
+	    case "$host" in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  lt_dump_script (stdout);
+	  return 0;
+	}
+      if (strcmp (argv[i], debug_opt) == 0)
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
+     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+     because on Windows, both *_VARNAMEs are PATH but uninstalled
+     libraries must come first. */
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
+  for (i = 0; i < newargc; i++)
+    {
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  newargz = prepare_spawn (newargz);
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char *concat_name;
+
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = q - p;
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (strcmp (str, pat) == 0)
+	*str = '\0';
+    }
+  return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    int len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[len-1] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+EOF
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+   Note that spawn() does not by itself call the command interpreter
+     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+         GetVersionEx(&v);
+         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+      }) ? "cmd.exe" : "command.com").
+   Instead it simply concatenates the arguments, separated by ' ', and calls
+   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
+   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+   special way:
+   - Space and tab are interpreted as delimiters. They are not treated as
+     delimiters if they are surrounded by double quotes: "...".
+   - Unescaped double quotes are removed from the input. Their only effect is
+     that within double quotes, space and tab are treated like normal
+     characters.
+   - Backslashes not followed by double quotes are not special.
+   - But 2*n+1 backslashes followed by a double quote become
+     n backslashes followed by a double quote (n >= 0):
+       \" -> "
+       \\\" -> \"
+       \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+  size_t argc;
+  char **new_argv;
+  size_t i;
+
+  /* Count number of arguments.  */
+  for (argc = 0; argv[argc] != NULL; argc++)
+    ;
+
+  /* Allocate new argument vector.  */
+  new_argv = XMALLOC (char *, argc + 1);
+
+  /* Put quoted arguments into the new argument vector.  */
+  for (i = 0; i < argc; i++)
+    {
+      const char *string = argv[i];
+
+      if (string[0] == '\0')
+	new_argv[i] = xstrdup ("\"\"");
+      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+	{
+	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+	  size_t length;
+	  unsigned int backslashes;
+	  const char *s;
+	  char *quoted_string;
+	  char *p;
+
+	  length = 0;
+	  backslashes = 0;
+	  if (quote_around)
+	    length++;
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		length += backslashes + 1;
+	      length++;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    length += backslashes + 1;
+
+	  quoted_string = XMALLOC (char, length + 1);
+
+	  p = quoted_string;
+	  backslashes = 0;
+	  if (quote_around)
+	    *p++ = '"';
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		{
+		  unsigned int j;
+		  for (j = backslashes + 1; j > 0; j--)
+		    *p++ = '\\';
+		}
+	      *p++ = c;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    {
+	      unsigned int j;
+	      for (j = backslashes; j > 0; j--)
+		*p++ = '\\';
+	      *p++ = '"';
+	    }
+	  *p = '\0';
+
+	  new_argv[i] = quoted_string;
+	}
+      else
+	new_argv[i] = (char *) string;
+    }
+  new_argv[argc] = NULL;
+
+  return new_argv;
+}
+EOF
+		;;
+	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
+            cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $opt_debug
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $opt_debug
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args=$nonopt
+    base_compile="$nonopt $@"
+    compile_command=$nonopt
+    finalize_command=$nonopt
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+    new_inherited_linker_flags=
+
+    avoid_version=no
+    bindir=
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    non_pic_objects=
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+    weak_libs=
+    single_module="${wl}-single_module"
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    func_warning "complete static linking is impossible in this configuration"
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	-static)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg="$1"
+      shift
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	bindir)
+	  bindir="$arg"
+	  prev=
+	  continue
+	  ;;
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
+	    preload=yes
+	  fi
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      func_append dlfiles " $arg"
+	    else
+	      func_append dlprefiles " $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file \`$arg' does not exist"
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) func_append deplibs " $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat "$save_arg"`
+	    do
+#	      func_append moreargs " $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if func_lalib_unsafe_p "$arg"; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		func_source "$arg"
+
+		if test -z "$pic_object" ||
+		   test -z "$non_pic_object" ||
+		   test "$pic_object" = none &&
+		   test "$non_pic_object" = none; then
+		  func_fatal_error "cannot find name of object for \`$arg'"
+		fi
+
+		# Extract subdirectory from the argument.
+		func_dirname "$arg" "/" ""
+		xdir="$func_dirname_result"
+
+		if test "$pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object="$xdir$pic_object"
+
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		      func_append dlfiles " $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test "$prev" = dlprefiles; then
+		    # Preload the old-style object.
+		    func_append dlprefiles " $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  func_append libobjs " $pic_object"
+		  arg="$pic_object"
+		fi
+
+		# Non-PIC object.
+		if test "$non_pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object="$xdir$non_pic_object"
+
+		  # A standard non-PIC object
+		  func_append non_pic_objects " $non_pic_object"
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if $opt_dry_run; then
+		  # Extract subdirectory from the argument.
+		  func_dirname "$arg" "/" ""
+		  xdir="$func_dirname_result"
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "\`$arg' is not a valid libtool object"
+		fi
+	      fi
+	    done
+	  else
+	    func_fatal_error "link input file \`$arg' does not exist"
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    func_fatal_error "only absolute run-paths are allowed"
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) func_append rpath " $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) func_append xrpath " $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	shrext)
+	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+	weak)
+	  func_append weak_libs " $arg"
+	  prev=
+	  continue
+	  ;;
+	xcclinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xcompiler)
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $wl$qarg"
+	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework)
+	prev=framework
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	func_stripname "-L" '' "$arg"
+	if test -z "$func_stripname_result"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between \`-L' and \`$1'"
+	  else
+	    func_fatal_error "need path for \`-L' option"
+	  fi
+	fi
+	func_resolve_sysroot "$func_stripname_result"
+	dir=$func_resolve_sysroot_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
+	  dir="$absdir"
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "* | *" $arg "*)
+	  # Will only happen for absolute or sysroot arguments
+	  ;;
+	*)
+	  # Preserve sysroot, but never include relative directories
+	  case $dir in
+	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+	    *) func_append deplibs " -L$dir" ;;
+	  esac
+	  func_append lib_search_path " $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
+	  *) func_append dllsearchpath ":$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    func_append deplibs " System.ltframework"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  esac
+	elif test "X$arg" = "X-lc_r"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	func_append deplibs " $arg"
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot|--sysroot)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	prev=xcompiler
+	continue
+	;;
+
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) func_append new_inherited_linker_flags " $arg" ;;
+	esac
+	continue
+	;;
+
+      -multi_module)
+	single_module="${wl}-multi_module"
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "\`-no-install' is ignored for $host"
+	  func_warning "assuming \`-no-fast-install' instead"
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	=*)
+	  func_stripname '=' '' "$dir"
+	  dir=$lt_sysroot$func_stripname_result
+	  ;;
+	*)
+	  func_fatal_error "only absolute run-paths are allowed"
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) func_append xrpath " $dir" ;;
+	esac
+	continue
+	;;
+
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -weak)
+        prev=weak
+	continue
+	;;
+
+      -Wc,*)
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  func_append arg " $func_quote_for_eval_result"
+	  func_append compiler_flags " $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Wl,*)
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  func_append arg " $wl$func_quote_for_eval_result"
+	  func_append compiler_flags " $wl$func_quote_for_eval_result"
+	  func_append linker_flags " $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
+      # --sysroot=*          for sysroot support
+      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        func_append compiler_flags " $arg"
+        continue
+        ;;
+
+      # Some other compiler flag.
+      -* | +*)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      *.$objext)
+	# A standard object.
+	func_append objs " $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if func_lalib_unsafe_p "$arg"; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  func_source "$arg"
+
+	  if test -z "$pic_object" ||
+	     test -z "$non_pic_object" ||
+	     test "$pic_object" = none &&
+	     test "$non_pic_object" = none; then
+	    func_fatal_error "cannot find name of object for \`$arg'"
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  func_dirname "$arg" "/" ""
+	  xdir="$func_dirname_result"
+
+	  if test "$pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    pic_object="$xdir$pic_object"
+
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		func_append dlfiles " $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test "$prev" = dlprefiles; then
+	      # Preload the old-style object.
+	      func_append dlprefiles " $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    func_append libobjs " $pic_object"
+	    arg="$pic_object"
+	  fi
+
+	  # Non-PIC object.
+	  if test "$non_pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object="$xdir$non_pic_object"
+
+	    # A standard non-PIC object
+	    func_append non_pic_objects " $non_pic_object"
+	    if test -z "$pic_object" || test "$pic_object" = none ; then
+	      arg="$non_pic_object"
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if $opt_dry_run; then
+	    # Extract subdirectory from the argument.
+	    func_dirname "$arg" "/" ""
+	    xdir="$func_dirname_result"
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "\`$arg' is not a valid libtool object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	func_append deplibs " $arg"
+	func_append old_deplibs " $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	func_resolve_sysroot "$arg"
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  func_append dlfiles " $func_resolve_sysroot_result"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  func_append dlprefiles " $func_resolve_sysroot_result"
+	  prev=
+	else
+	  func_append deplibs " $func_resolve_sysroot_result"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+      fi
+    done # argument parsing loop
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prevarg' option requires an argument"
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    func_basename "$output"
+    outputname="$func_basename_result"
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    func_dirname "$output" "/" ""
+    output_objdir="$func_dirname_result$objdir"
+    func_to_tool_file "$output_objdir/"
+    tool_output_objdir=$func_to_tool_file_result
+    # Create the object directory.
+    func_mkdir_p "$output_objdir"
+
+    # Determine the type of output
+    case $output in
+    "")
+      func_fatal_help "you must specify an output file"
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if $opt_preserve_dup_deps ; then
+	case "$libs " in
+	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	esac
+      fi
+      func_append libs " $deplib"
+    done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if $opt_duplicate_compiler_generated_deps; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+	  esac
+	  func_append pre_post_deps " $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
+    case $linkmode in
+    lib)
+	passes="conv dlpreopen link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+
+    for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test "$linkmode,$pass" = "lib,link"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs="$tmp_deplibs"
+      fi
+
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
+	deplibs=
+      fi
+      if test "$linkmode" = prog; then
+	case $pass in
+	dlopen) libs="$dlfiles" ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  func_resolve_sysroot "$lib"
+	  case $lib in
+	  *.la)	func_source "$func_resolve_sysroot_result" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) func_append deplibs " $deplib" ;;
+	    esac
+	  done
+	done
+	libs="$dlprefiles"
+      fi
+      if test "$pass" = dlopen; then
+	# Collect dlpreopened libraries
+	save_deplibs="$deplibs"
+	deplibs=
+      fi
+
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    func_append compiler_flags " $deplib"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+	    func_warning "\`-l' is ignored for archives/objects"
+	    continue
+	  fi
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test "$linkmode" = lib; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib="$searchdir/lib${name}${search_ext}"
+	      if test -f "$lib"; then
+		if test "$search_ext" = ".la"; then
+		  found=yes
+		else
+		  found=no
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  else # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if func_lalib_p "$lib"; then
+		  library_names=
+		  old_library=
+		  func_source "$lib"
+		  for l in $old_library $library_names; do
+		    ll="$l"
+		  done
+		  if test "X$ll" = "X$old_library" ; then # only static version available
+		    found=no
+		    func_dirname "$lib" "" "."
+		    ladir="$func_dirname_result"
+		    lib=$ladir/$old_library
+		    if test "$linkmode,$pass" = "prog,link"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+		;;
+	      *) ;;
+	      esac
+	    fi
+	  fi
+	  ;; # -l
+	*.ltframework)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test "$pass" = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  prog)
+	    if test "$pass" = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test "$pass" = scan; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  *)
+	    func_warning "\`-L' is ignored for archives/objects"
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test "$pass" = link; then
+	    func_stripname '-R' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    dir=$func_resolve_sysroot_result
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) func_append xrpath " $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la)
+	  func_resolve_sysroot "$deplib"
+	  lib=$func_resolve_sysroot_result
+	  ;;
+	*.$libext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=no
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		    valid_a_lib=yes
+		  fi
+		;;
+		pass_all)
+		  valid_a_lib=yes
+		;;
+	      esac
+	      if test "$valid_a_lib" != yes; then
+		echo
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
+	      else
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      fi
+	      ;;
+	    esac
+	    continue
+	    ;;
+	  prog)
+	    if test "$pass" != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	  elif test "$linkmode" = prog; then
+	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      func_append newdlprefiles " $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      func_append newdlfiles " $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac # case $deplib
+
+	if test "$found" = yes || test -f "$lib"; then :
+	else
+	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+	fi
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+	func_dirname "$lib" "" "."
+	ladir="$func_dirname_result"
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	inherited_linker_flags=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	  test -n "$dlopen" && func_append dlfiles " $dlopen"
+	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+	fi
+
+	if test "$pass" = conv; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      func_fatal_error "cannot find name of link library for \`$lib'"
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    func_append convenience " $ladir/$objdir/$old_library"
+	    func_append old_convenience " $ladir/$objdir/$old_library"
+	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+	    func_fatal_error "\`$lib' is not a convenience library"
+	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	if test -n "$old_library" &&
+	   { test "$prefer_static_libs" = yes ||
+	     test "$prefer_static_libs,$installed" = "built,no"; }; then
+	  linklib=$old_library
+	else
+	  for l in $old_library $library_names; do
+	    linklib="$l"
+	  done
+	fi
+	if test -z "$linklib"; then
+	  func_fatal_error "cannot find name of link library for \`$lib'"
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$pass" = dlopen; then
+	  if test -z "$libdir"; then
+	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+	  fi
+	  if test -z "$dlname" ||
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    func_append dlprefiles " $lib $dependency_libs"
+	  else
+	    func_append newdlfiles " $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    func_warning "cannot determine absolute directory name of \`$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	func_basename "$lib"
+	laname="$func_basename_result"
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    #func_warning "library \`$lib' was moved."
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$lt_sysroot$libdir"
+	    absdir="$lt_sysroot$libdir"
+	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  fi
+	fi # $installed = yes
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
+
+	# This library was specified with -dlpreopen.
+	if test "$pass" = dlpreopen; then
+	  if test -z "$libdir" && test "$linkmode" = prog; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+	  fi
+	  case "$host" in
+	    # special handling for platforms with PE-DLLs.
+	    *cygwin* | *mingw* | *cegcc* )
+	      # Linker will automatically link against shared library if both
+	      # static and shared are present.  Therefore, ensure we extract
+	      # symbols from the import library if a shared library is present
+	      # (otherwise, the dlopen module name will be incorrect).  We do
+	      # this by putting the import library name into $newdlprefiles.
+	      # We recover the dlopen module name by 'saving' the la file
+	      # name in a special purpose variable, and (later) extracting the
+	      # dlname from the la file.
+	      if test -n "$dlname"; then
+	        func_tr_sh "$dir/$linklib"
+	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+	        func_append newdlprefiles " $dir/$linklib"
+	      else
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      fi
+	    ;;
+	    * )
+	      # Prefer using a static library (so that no silly _DYNAMIC symbols
+	      # are required to link).
+	      if test -n "$old_library"; then
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      # Otherwise, use the dlname, so that lt_dlopen finds it.
+	      elif test -n "$dlname"; then
+	        func_append newdlprefiles " $dir/$dlname"
+	      else
+	        func_append newdlprefiles " $dir/$linklib"
+	      fi
+	    ;;
+	  esac
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test "$linkmode" = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test "$linkmode" = prog && test "$pass" != link; then
+	  func_append newlib_search_path " $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) func_stripname '-L' '' "$deplib"
+	         func_resolve_sysroot "$func_stripname_result"
+	         func_append newlib_search_path " $func_resolve_sysroot_result"
+		 ;;
+	    esac
+	    # Need to link against all dependency_libs?
+	    if test "$linkalldeplibs" = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test "$linkmode,$pass" = "prog,link"; then
+	  if test -n "$library_names" &&
+	     { { test "$prefer_static_libs" = no ||
+	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	      # Make sure the rpath contains only unique directories.
+	      case "$temp_rpath:" in
+	      *"$absdir:"*) ;;
+	      *) func_append temp_rpath "$absdir:" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc*)
+	      # No point in relinking DLLs because paths are not encoded
+	      func_append notinst_deplibs " $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test "$installed" = no; then
+	      func_append notinst_deplibs " $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=""
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule="$dlpremoduletest"
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	    echo
+	    if test "$linkmode" = prog; then
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $ECHO "*** $linklib is not portable!"
+	  fi
+	  if test "$linkmode" = lib &&
+	     test "$hardcode_into_libs" = yes; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    shift
+	    realname="$1"
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw* | *cegcc*)
+	        func_arith $current - $age
+		major=$func_arith_result
+		versuffix="-$major"
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    func_basename "$soroot"
+	    soname="$func_basename_result"
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      func_verbose "extracting exported symbol list from \`$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      func_verbose "generating import library for \`$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
+		  *-*-darwin* )
+		    # if the lib is a (non-dlopened) module then we can not
+		    # link against it, someone is ignoring the earlier warnings
+		    if /usr/bin/file -L $add 2> /dev/null |
+			 $GREP ": [^:]* bundle" >/dev/null ; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library" ; then
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
+			else
+			  add="$dir/$old_library"
+			fi
+		      elif test -n "$old_library"; then
+			add="$dir/$old_library"
+		      fi
+		    fi
+		esac
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes &&
+	         test "$hardcode_direct_absolute" = no; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$absdir"
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      func_append add_dir " -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      func_fatal_configuration "unsupported hardcode properties"
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes &&
+		 test "$hardcode_minus_L" != yes &&
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) func_append finalize_shlibpath "$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test "$hardcode_direct" = yes &&
+	       test "$hardcode_direct_absolute" = no; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) func_append finalize_shlibpath "$libdir:" ;;
+	      esac
+	      add="-l$name"
+	    elif test "$hardcode_automatic" = yes; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+		add="$inst_prefix_dir$libdir/$linklib"
+	      else
+		add="$libdir/$linklib"
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir="-L$libdir"
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    func_append add_dir " -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add="-l$name"
+	    fi
+
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test "$linkmode" = prog; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test "$linkmode" = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
+	       test "$link_static" = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) func_append xrpath " $temp_xrpath";;
+		   esac;;
+	      *) func_append temp_deplibs " $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
+
+	  func_append newlib_search_path " $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    case $deplib in
+              -L*) func_stripname '-L' '' "$deplib"
+                   func_resolve_sysroot "$func_stripname_result";;
+              *) func_resolve_sysroot "$deplib" ;;
+            esac
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $func_resolve_sysroot_result "*)
+                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $func_resolve_sysroot_result"
+	  done
+
+	  if test "$link_all_deplibs" != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      path=
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+	        func_resolve_sysroot "$deplib"
+	        deplib=$func_resolve_sysroot_result
+	        func_dirname "$deplib" "" "."
+		dir=$func_dirname_result
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    func_warning "cannot determine absolute directory name of \`$dir'"
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if $GREP "^installed=no" $deplib > /dev/null; then
+		case $host in
+		*-*-darwin*)
+		  depdepl=
+		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names" ; then
+		    for tmp in $deplibrary_names ; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$absdir/$objdir/$depdepl" ; then
+		      depdepl="$absdir/$objdir/$depdepl"
+		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+		      path=
+		    fi
+		  fi
+		  ;;
+		*)
+		  path="-L$absdir/$objdir"
+		  ;;
+		esac
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  #test "$absdir" != "$libdir" && \
+		  #  func_warning "\`$deplib' seems to be moved"
+
+		  path="-L$absdir"
+		fi
+		;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test "$pass" = link; then
+	if test "$linkmode" = "prog"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test "$pass" != dlopen; then
+	if test "$pass" != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) func_append lib_search_path " $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
+
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) func_append tmp_libs " $deplib" ;;
+	      esac
+	      ;;
+	    *) func_append tmp_libs " $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=""
+	  ;;
+	esac
+	if test -n "$i" ; then
+	  func_append tmp_libs " $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
+    fi
+    if test "$linkmode" = prog || test "$linkmode" = lib; then
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for archives"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for archives" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for archives"
+
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for archives"
+
+      test -n "$vinfo" && \
+	func_warning "\`-version-info/-version-number' is ignored for archives"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "\`-export-symbols' is ignored for archives"
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      func_append objs "$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	test "$module" = no && \
+	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test "$deplibs_check_method" != pass_all; then
+	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+	else
+	  echo
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
+	  func_append libobjs " $objs"
+	fi
+      fi
+
+      test "$dlself" != no && \
+	func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+      set dummy $rpath
+      shift
+      test "$#" -gt 1 && \
+	func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+      install_libdir="$1"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a `.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	test -n "$vinfo" && \
+	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+	test -n "$release" && \
+	  func_warning "\`-release' is ignored for convenience libraries"
+      else
+
+	# Parse the version information argument.
+	save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	shift
+	IFS="$save_ifs"
+
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to \`-version-info'"
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major="$1"
+	  number_minor="$2"
+	  number_revision="$3"
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # which has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
+	  darwin|linux|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_revision"
+	    ;;
+	  freebsd-aout|freebsd-elf|qnx|sunos)
+	    current="$number_major"
+	    revision="$number_minor"
+	    age="0"
+	    ;;
+	  irix|nonstopux)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_minor"
+	    lt_irix_increment=no
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current="$1"
+	  revision="$2"
+	  age="$3"
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "CURRENT \`$current' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "REVISION \`$revision' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "AGE \`$age' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	irix | nonstopux)
+	  if test "X$lt_irix_increment" = "Xno"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring="$verstring_prefix$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test "$loop" -ne 0; do
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring_prefix$major.$iface:$verstring"
+	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
+	  ;;
+
+	linux) # correct to gnu/linux during the next big refactor
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test "$loop" -ne 0; do
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  func_append verstring ":${current}.0"
+	  ;;
+
+	qnx)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
+	  func_arith $current - $age
+	  major=$func_arith_result
+	  versuffix="-$major"
+	  ;;
+
+	*)
+	  func_fatal_configuration "unknown library version type \`$version_type'"
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring="0.0"
+	    ;;
+	  esac
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    func_warning "undefined symbols not allowed in $host shared libraries"
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+
+      fi
+
+      func_generate_dlsyms "$libname" "$libname" "yes"
+      func_append libobjs " $symfileobj"
+      test "X$libobjs" = "X " && libobjs=
+
+      if test "$opt_mode" != relink; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$ECHO "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext | *.gcno)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
+		   continue
+		 fi
+	       fi
+	       func_append removelist " $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	func_append oldlibs " $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  func_replace_sysroot "$libdir"
+	  func_append temp_xrpath " -R$func_replace_sysroot_result"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) func_append dlfiles " $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) func_append dlprefiles " $lib" ;;
+	esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    func_append deplibs " System.ltframework"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test "$build_libtool_need_lc" = "yes"; then
+	      func_append deplibs " -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $opt_dry_run || $RM conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    func_append newdeplibs " $i"
+		    i=""
+		    ;;
+		  esac
+		fi
+		if test -n "$i" ; then
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    func_append newdeplibs " $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		  ldd_output=`ldd conftest`
+		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      func_append newdeplibs " $i"
+		      i=""
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i" ; then
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		      func_append newdeplibs " $i"
+		    else
+		      droppeddeps=yes
+		      echo
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		if test -n "$file_magic_glob"; then
+		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+		else
+		  libnameglob=$libname
+		fi
+		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  if test "$want_nocaseglob" = yes; then
+		    shopt -s nocaseglob
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		    $nocaseglob
+		  else
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		  fi
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
+			func_append newdeplibs " $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
+		      func_append newdeplibs " $a_deplib"
+		      a_deplib=""
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    for i in $predeps $postdeps ; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+	    done
+	  fi
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	    ;;
+	  esac
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+	  ;;
+	esac
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test "$allow_undefined" = no; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	# Remove ${wl} instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
+	if test "$hardcode_into_libs" = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		func_replace_sysroot "$libdir"
+		libdir=$func_replace_sysroot_result
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		func_append dep_rpath " $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append perm_rpath " $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      func_append rpath "$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath="$finalize_shlibpath"
+	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	shift
+	realname="$1"
+	shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib="$output_objdir/$realname"
+	linknames=
+	for link
+	do
+	  func_append linknames " $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols="$output_objdir/$libname.uexp"
+	  func_append delfiles " $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols="$export_symbols"
+	      export_symbols=
+	      always_export_symbols=yes
+	    fi
+	  fi
+	  ;;
+	esac
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $opt_dry_run || $RM $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd1 in $cmds; do
+	      IFS="$save_ifs"
+	      # Take the normal branch if the nm_file_list_spec branch
+	      # doesn't work or if tool conversion is not needed.
+	      case $nm_file_list_spec~$to_tool_file_cmd in
+		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+		  try_normal_branch=yes
+		  eval cmd=\"$cmd1\"
+		  func_len " $cmd"
+		  len=$func_len_result
+		  ;;
+		*)
+		  try_normal_branch=no
+		  ;;
+	      esac
+	      if test "$try_normal_branch" = yes \
+		 && { test "$len" -lt "$max_cmd_len" \
+		      || test "$max_cmd_len" -le -1; }
+	      then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
+	      elif test -n "$nm_file_list_spec"; then
+		func_basename "$output"
+		output_la=$func_basename_result
+		save_libobjs=$libobjs
+		save_output=$output
+		output=${output_objdir}/${output_la}.nm
+		func_to_tool_file "$output"
+		libobjs=$nm_file_list_spec$func_to_tool_file_result
+		func_append delfiles " $output"
+		func_verbose "creating $NM input file list: $output"
+		for obj in $save_libobjs; do
+		  func_to_tool_file "$obj"
+		  $ECHO "$func_to_tool_file_result"
+		done > "$output"
+		eval cmd=\"$cmd1\"
+		func_show_eval "$cmd" 'exit $?'
+		output=$save_output
+		libobjs=$save_libobjs
+		skipped_export=false
+	      else
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  tmp_export_symbols="$export_symbols"
+	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    func_append tmp_deplibs " $test_deplib"
+	    ;;
+	  esac
+	done
+	deplibs="$tmp_deplibs"
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test "$compiler_needs_object" = yes &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    func_append generated " $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    func_append libobjs " $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	fi
+
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  func_append linker_flags " $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test "$opt_mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
+	  fi
+	fi
+
+	if test "X$skipped_export" != "X:" &&
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  func_basename "$output"
+	  output_la=$func_basename_result
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  last_robj=
+	  k=1
+
+	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+	    output=${output_objdir}/${output_la}.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    echo 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    echo ')' >> $output
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$func_to_tool_file_result
+	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+	    output=${output_objdir}/${output_la}.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test "$compiler_needs_object" = yes; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-${k}.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test "X$objlist" = X ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test "$k" -eq 1 ; then
+		    # The first file doesn't have a previous command to add.
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-${k}.$objext
+		  objlist=" $obj"
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	      fi
+	      func_append delfiles " $output"
+
+	    else
+	      output=
+	    fi
+
+	    if ${skipped_export-false}; then
+	      func_verbose "generating symbol list for \`$libname.la'"
+	      export_symbols="$output_objdir/$libname.exp"
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	    fi
+
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS="$save_ifs"
+	      $opt_silent || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test "$opt_mode" = relink; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
+
+		exit $lt_exit
+	      }
+	    done
+	    IFS="$save_ifs"
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          if ${skipped_export-false}; then
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols="$export_symbols"
+	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  fi
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test "$module" = yes && test -n "$module_cmds" ; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
+	    fi
+	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append libobjs " $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
+	fi
+
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
+	  $opt_silent || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test "$opt_mode" = relink; then
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS="$save_ifs"
+
+	# Restore the uninstalled library and exit
+	if test "$opt_mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      func_show_eval '${RM}r "$gentop"'
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for objects"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for objects"
+
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for objects"
+
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for objects"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for objects"
+
+      case $output in
+      *.lo)
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $opt_dry_run || $RM $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
+      wl=
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	else
+	  gentop="$output_objdir/${obj}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # If we're not building shared, we need to use non_pic_objs
+      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      func_execute_cmds "$reload_cmds" 'exit $?'
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	func_execute_cmds "$reload_cmds" 'exit $?'
+      fi
+
+      if test -n "$gentop"; then
+	func_show_eval '${RM}r "$gentop"'
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
+      esac
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for programs"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for programs"
+
+      test "$preload" = yes \
+        && test "$dlopen_support" = unknown \
+	&& test "$dlopen_self" = unknown \
+	&& test "$dlopen_self_static" = unknown && \
+	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	;;
+      esac
+
+      case $host in
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test "$tagname" = CXX ; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      func_append compile_command " ${wl}-bind_at_load"
+	      func_append finalize_command " ${wl}-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
+
+
+      func_append compile_command " $compile_deplibs"
+      func_append finalize_command " $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append perm_rpath " $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
+	  *) func_append dllsearchpath ":$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_perm_rpath " $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+      fi
+
+      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
+      fi
+
+      wrappers_required=yes
+      case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
+      *cygwin* | *mingw* )
+        if test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      *)
+        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      esac
+      if test "$wrappers_required" = no; then
+	# Replace the output file specification.
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	# Delete the generated files.
+	if test -f "$output_objdir/${outputname}S.${objext}"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+	fi
+
+	exit $exit_status
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$opt_dry_run || $RM $output
+	# Link the executable and exit
+	func_show_eval "$link_command" 'exit $?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+	func_warning "this platform does not like uninstalled shared libraries"
+	func_warning "\`$output' will be relinked during installation"
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      func_show_eval "$link_command" 'exit $?'
+
+      if test -n "$postlink_cmds"; then
+	func_to_tool_file "$output_objdir/$outputname"
+	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	func_execute_cmds "$postlink_cmds" 'exit $?'
+      fi
+
+      # Now create the wrapper script.
+      func_verbose "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
+	    cwrapper="$output_path/$output_name.exe"
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
+
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host" ; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
+	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_wrapper no > $output
+	    chmod +x $output
+	  ;;
+	esac
+      }
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save $symfileobj"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$old_deplibs $non_pic_objects"
+	  if test "$preload" = yes && test -f "$symfileobj"; then
+	    func_append oldobjs " $symfileobj"
+	  fi
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	func_append generated " $gentop"
+
+	func_extract_archives $gentop $addlibs
+	func_append oldobjs " $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	cmds=$old_archive_from_new_cmds
+      else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append oldobjs " $func_extract_archives_result"
+	fi
+
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  echo "copying selected object files to avoid basename conflicts..."
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+	  func_mkdir_p "$gentop"
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    func_basename "$obj"
+	    objbase="$func_basename_result"
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		func_arith $counter + 1
+		counter=$func_arith_result
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      func_append oldobjs " $gentop/$newobj"
+	      ;;
+	    *) func_append oldobjs " $obj" ;;
+	    esac
+	  done
+	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
+	eval cmds=\"$old_archive_cmds\"
+
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	elif test -n "$archiver_list_spec"; then
+	  func_verbose "using command file archive linking..."
+	  for obj in $oldobjs
+	  do
+	    func_to_tool_file "$obj"
+	    $ECHO "$func_to_tool_file_result"
+	  done > $output_objdir/$libname.libcmd
+	  func_to_tool_file "$output_objdir/$libname.libcmd"
+	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  func_verbose "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
+	  for obj in $save_oldobjs
+	  do
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj" ; then
+		RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      objlist=
+	      len=$len0
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test "X$oldobjs" = "X" ; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      func_execute_cmds "$cmds" 'exit $?'
+    done
+
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      func_verbose "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      if test "$hardcode_automatic" = yes ; then
+	relink_command=
+      fi
+
+      # Only create the output if not a dry run.
+      $opt_dry_run || {
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		func_basename "$deplib"
+		name="$func_basename_result"
+		func_resolve_sysroot "$deplib"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$deplib' is not a valid libtool archive"
+		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      -L*)
+		func_stripname -L '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -L$func_replace_sysroot_result"
+		;;
+	      -R*)
+		func_stripname -R '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -R$func_replace_sysroot_result"
+		;;
+	      *) func_append newdependency_libs " $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+
+	    for lib in $dlfiles; do
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      *) func_append newdlfiles " $lib" ;;
+	      esac
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      esac
+	    done
+	    dlprefiles="$newdlprefiles"
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlfiles " $abs"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlprefiles " $abs"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  fi
+	  $RM $output
+	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test "x$bindir" != x ;
+	      then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
+	  esac
+	  $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test "$installed" = no && test "$need_relink" = yes; then
+	    $ECHO >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      }
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+}
+
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+    func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $opt_debug
+    RM="$nonopt"
+    files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -f) func_append RM " $arg"; rmforce=yes ;;
+      -*) func_append RM " $arg" ;;
+      *) func_append files " $arg" ;;
+      esac
+    done
+
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
+
+    rmdirs=
+
+    for file in $files; do
+      func_dirname "$file" "" "."
+      dir="$func_dirname_result"
+      if test "X$dir" = X.; then
+	odir="$objdir"
+      else
+	odir="$dir/$objdir"
+      fi
+      func_basename "$file"
+      name="$func_basename_result"
+      test "$opt_mode" = uninstall && odir="$dir"
+
+      # Remember odir for removal later, being careful to avoid duplicates
+      if test "$opt_mode" = clean; then
+	case " $rmdirs " in
+	  *" $odir "*) ;;
+	  *) func_append rmdirs " $odir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif test "$rmforce" = yes; then
+	continue
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    func_append rmfiles " $odir/$n"
+	  done
+	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+	  case "$opt_mode" in
+	  clean)
+	    case " $library_names " in
+	    *" $dlname "*) ;;
+	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+	    esac
+	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if func_lalib_p "$file"; then
+
+	  # Read the .lo file
+	  func_source $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" &&
+	     test "$pic_object" != none; then
+	    func_append rmfiles " $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" &&
+	     test "$non_pic_object" != none; then
+	    func_append rmfiles " $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test "$opt_mode" = clean ; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    func_append rmfiles " $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      func_append rmfiles " $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	      func_append rmfiles " $odir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name" ; then
+	      func_append rmfiles " $odir/lt-${noexename}.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
+    done
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
+      fi
+    done
+
+    exit $exit_status
+}
+
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+    func_mode_uninstall ${1+"$@"}
+
+test -z "$opt_mode" && {
+  help="$generic_help"
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode \`$opt_mode'"
+
+if test -n "$exec_cmd"; then
+  eval exec "$exec_cmd"
+  exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+
diff --git a/autoconf/missing b/autoconf/missing
new file mode 100755
index 0000000..86a8fc3
--- /dev/null
+++ b/autoconf/missing
@@ -0,0 +1,331 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2012-01-06.13; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+  s/^gnu-//; t
+  s/^gnu//; t
+  s/^g//; t'`
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).  This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+  lex*|yacc*)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case $f in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te*)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison*|yacc*)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if test $# -ne 1; then
+        eval LASTARG=\${$#}
+	case $LASTARG in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f y.tab.h; then
+	echo >y.tab.h
+    fi
+    if test ! -f y.tab.c; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex*|flex*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if test $# -ne 1; then
+        eval LASTARG=\${$#}
+	case $LASTARG in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f lex.yy.c; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit $?
+    fi
+    ;;
+
+  makeinfo*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/autoconf/tea/Makefile.in b/autoconf/tea/Makefile.in
new file mode 100644
index 0000000..08b1a44
--- /dev/null
+++ b/autoconf/tea/Makefile.in
@@ -0,0 +1,439 @@
+# Makefile.in --
+#
+#	This file is a Makefile for Sample TEA Extension.  If it has the name
+#	"Makefile.in" then it is a template for a Makefile;  to generate the
+#	actual Makefile, run "./configure", which is a configuration script
+#	generated by the "autoconf" program (constructs like "@foo@" will get
+#	replaced in the actual Makefile.
+#
+# Copyright (c) 1999 Scriptics Corporation.
+# Copyright (c) 2002-2005 ActiveState Corporation.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# RCS: @(#) $Id: Makefile.in,v 1.59 2005/07/26 19:17:02 mdejong Exp $
+
+#========================================================================
+# Add additional lines to handle any additional AC_SUBST cases that
+# have been added in a customized configure script.
+#========================================================================
+
+#SAMPLE_NEW_VAR	= @SAMPLE_NEW_VAR@
+
+#========================================================================
+# Nothing of the variables below this line should need to be changed.
+# Please check the TARGETS section below to make sure the make targets
+# are correct.
+#========================================================================
+
+#========================================================================
+# The names of the source files is defined in the configure script.
+# The object files are used for linking into the final library.
+# This will be used when a dist target is added to the Makefile.
+# It is not important to specify the directory, as long as it is the
+# $(srcdir) or in the generic, win or unix subdirectory.
+#========================================================================
+
+PKG_SOURCES	= @PKG_SOURCES@
+PKG_OBJECTS	= @PKG_OBJECTS@
+
+PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
+PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
+
+#========================================================================
+# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
+# this package that need to be installed, if any.
+#========================================================================
+
+PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
+
+#========================================================================
+# This is a list of public header files to be installed, if any.
+#========================================================================
+
+PKG_HEADERS	= @PKG_HEADERS@
+
+#========================================================================
+# "PKG_LIB_FILE" refers to the library (dynamic or static as per
+# configuration options) composed of the named objects.
+#========================================================================
+
+PKG_LIB_FILE	= @PKG_LIB_FILE@
+PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
+
+lib_BINARIES	= $(PKG_LIB_FILE)
+BINARIES	= $(lib_BINARIES)
+
+SHELL		= @SHELL@
+
+srcdir		= @srcdir@
+prefix		= @prefix@
+exec_prefix	= @exec_prefix@
+
+bindir		= @bindir@
+libdir		= @libdir@
+datadir		= @datadir@
+mandir		= @mandir@
+includedir	= @includedir@
+
+DESTDIR		=
+
+PKG_DIR		= $(PACKAGE_NAME)$(PACKAGE_VERSION)
+pkgdatadir	= $(datadir)/$(PKG_DIR)
+pkglibdir	= $(libdir)/$(PKG_DIR)
+pkgincludedir	= $(includedir)/$(PKG_DIR)
+
+top_builddir	= .
+
+INSTALL		= @INSTALL@
+INSTALL_PROGRAM	= @INSTALL_PROGRAM@
+INSTALL_DATA	= @INSTALL_DATA@
+INSTALL_SCRIPT	= @INSTALL_SCRIPT@
+
+PACKAGE_NAME	= @PACKAGE_NAME@
+PACKAGE_VERSION	= @PACKAGE_VERSION@
+CC		= @CC@
+CFLAGS_DEFAULT	= @CFLAGS_DEFAULT@
+CFLAGS_WARNING	= @CFLAGS_WARNING@
+CLEANFILES	= @CLEANFILES@
+EXEEXT		= @EXEEXT@
+LDFLAGS_DEFAULT	= @LDFLAGS_DEFAULT@
+MAKE_LIB	= @MAKE_LIB@
+MAKE_SHARED_LIB	= @MAKE_SHARED_LIB@
+MAKE_STATIC_LIB	= @MAKE_STATIC_LIB@
+MAKE_STUB_LIB	= @MAKE_STUB_LIB@
+OBJEXT		= @OBJEXT@
+RANLIB		= @RANLIB@
+RANLIB_STUB	= @RANLIB_STUB@
+SHLIB_CFLAGS	= @SHLIB_CFLAGS@
+SHLIB_LD	= @SHLIB_LD@
+SHLIB_LD_LIBS	= @SHLIB_LD_LIBS@
+STLIB_LD	= @STLIB_LD@
+#TCL_DEFS	= @TCL_DEFS@
+TCL_BIN_DIR	= @TCL_BIN_DIR@
+TCL_SRC_DIR	= @TCL_SRC_DIR@
+#TK_BIN_DIR	= @TK_BIN_DIR@
+#TK_SRC_DIR	= @TK_SRC_DIR@
+
+# This is no longer necessary even for packages that use private Tcl headers
+#TCL_TOP_DIR_NATIVE	= @TCL_TOP_DIR_NATIVE@
+# Not used, but retained for reference of what libs Tcl required
+#TCL_LIBS	= @TCL_LIBS@
+
+#========================================================================
+# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
+# package without installing.  The other environment variables allow us
+# to test against an uninstalled Tcl.  Add special env vars that you
+# require for testing here (like TCLX_LIBRARY).
+#========================================================================
+
+EXTRA_PATH	= $(top_builddir):$(TCL_BIN_DIR)
+#EXTRA_PATH	= $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
+TCLLIBPATH	= $(top_builddir)
+TCLSH_ENV	= TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \
+		  @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
+		  PATH="$(EXTRA_PATH):$(PATH)" \
+		  TCLLIBPATH="$(TCLLIBPATH)"
+#		  TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
+
+TCLSH_PROG	= @TCLSH_PROG@
+TCLSH	= $(TCLSH_ENV) $(TCLSH_PROG)
+
+#WISH_PROG	= @WISH_PROG@
+#WISH	= $(TCLSH_ENV) $(WISH_PROG)
+
+
+SHARED_BUILD	= @SHARED_BUILD@
+
+INCLUDES	= @PKG_INCLUDES@ @TCL_INCLUDES@ -I$(srcdir)/..
+#INCLUDES	= @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@
+
+PKG_CFLAGS	= @PKG_CFLAGS@
+
+# TCL_DEFS is not strictly need here, but if you remove it, then you
+# must make sure that configure.in checks for the necessary components
+# that your library may use.  TCL_DEFS can actually be a problem if
+# you do not compile with a similar machine setup as the Tcl core was
+# compiled with.
+#DEFS		= $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
+DEFS		= @DEFS@ $(PKG_CFLAGS)
+
+CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl
+
+CPPFLAGS	= @CPPFLAGS@
+LIBS		= @PKG_LIBS@ @LIBS@
+AR		= @AR@
+CFLAGS		= @CFLAGS@
+COMPILE		= $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+#========================================================================
+# Start of user-definable TARGETS section
+#========================================================================
+
+#========================================================================
+# TEA TARGETS.  Please note that the "libraries:" target refers to platform
+# independent files, and the "binaries:" target inclues executable programs and
+# platform-dependent libraries.  Modify these targets so that they install
+# the various pieces of your package.  The make and install rules
+# for the BINARIES that you specified above have already been done.
+#========================================================================
+
+all: binaries libraries doc
+
+#========================================================================
+# The binaries target builds executable programs, Windows .dll's, unix
+# shared/static libraries, and any other platform-dependent files.
+# The list of targets to build for "binaries:" is specified at the top
+# of the Makefile, in the "BINARIES" variable.
+#========================================================================
+
+binaries: $(BINARIES)
+
+libraries:
+
+
+#========================================================================
+# Your doc target should differentiate from doc builds (by the developer)
+# and doc installs (see install-doc), which just install the docs on the
+# end user machine when building from source.
+#========================================================================
+
+doc:
+	@echo "If you have documentation to create, place the commands to"
+	@echo "build the docs in the 'doc:' target.  For example:"
+	@echo "        xml2nroff sample.xml > sample.n"
+	@echo "        xml2html sample.xml > sample.html"
+
+install: all install-binaries install-libraries install-doc
+
+install-binaries: binaries install-lib-binaries install-bin-binaries
+
+#========================================================================
+# This rule installs platform-independent files, such as header files.
+# The list=...; for p in $$list handles the empty list case x-platform.
+#========================================================================
+
+install-libraries: libraries
+	@mkdir -p $(DESTDIR)$(includedir)
+	@echo "Installing header files in $(DESTDIR)$(includedir)"
+	@list='$(PKG_HEADERS)'; for i in $$list; do \
+	    echo "Installing $(srcdir)/$$i" ; \
+	    $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
+	done;
+
+#========================================================================
+# Install documentation.  Unix manpages should go in the $(mandir)
+# directory.
+#========================================================================
+
+install-doc: doc
+	@mkdir -p $(DESTDIR)$(mandir)/mann
+	@echo "Installing documentation in $(DESTDIR)$(mandir)"
+	@list='$(srcdir)/doc/*.n'; for i in $$list; do \
+	    echo "Installing $$i"; \
+	    rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \
+	    $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
+	done
+
+test: binaries libraries
+	@echo "SQLite TEA distribution does not include tests"
+
+shell: binaries libraries
+	@$(TCLSH) $(SCRIPT)
+
+gdb:
+	$(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT)
+
+depend:
+
+#========================================================================
+# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
+# mentioned above.  That will ensure that this target is built when you
+# run "make binaries".
+#
+# The $(PKG_OBJECTS) objects are created and linked into the final
+# library.  In most cases these object files will correspond to the
+# source files above.
+#========================================================================
+
+$(PKG_LIB_FILE): $(PKG_OBJECTS)
+	-rm -f $(PKG_LIB_FILE)
+	${MAKE_LIB}
+	$(RANLIB) $(PKG_LIB_FILE)
+
+$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
+	-rm -f $(PKG_STUB_LIB_FILE)
+	${MAKE_STUB_LIB}
+	$(RANLIB_STUB) $(PKG_STUB_LIB_FILE)
+
+#========================================================================
+# We need to enumerate the list of .c to .o lines here.
+#
+# In the following lines, $(srcdir) refers to the toplevel directory
+# containing your extension.  If your sources are in a subdirectory,
+# you will have to modify the paths to reflect this:
+#
+# sample.$(OBJEXT): $(srcdir)/generic/sample.c
+# 	$(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
+#
+# Setting the VPATH variable to a list of paths will cause the makefile
+# to look into these paths when resolving .c to .obj dependencies.
+# As necessary, add $(srcdir):$(srcdir)/compat:....
+#========================================================================
+
+VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win
+
+.c.@OBJEXT@:
+	$(COMPILE) -c `@CYGPATH@ $<` -o $@
+
+#========================================================================
+# Distribution creation
+# You may need to tweak this target to make it work correctly.
+#========================================================================
+
+#COMPRESS	= tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
+COMPRESS	= gtar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
+DIST_ROOT	= /tmp/dist
+DIST_DIR	= $(DIST_ROOT)/$(PKG_DIR)
+
+dist-clean:
+	rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*
+
+dist: dist-clean
+	mkdir -p $(DIST_DIR)
+	cp -p $(srcdir)/README* $(srcdir)/license* \
+		$(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \
+		$(DIST_DIR)/
+	chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
+	chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in
+
+	for i in $(srcdir)/*.[ch]; do \
+	    if [ -f $$i ]; then \
+		cp -p $$i $(DIST_DIR)/ ; \
+	    fi; \
+	done;
+
+	mkdir $(DIST_DIR)/tclconfig
+	cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
+		$(DIST_DIR)/tclconfig/
+	chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
+	chmod +x $(DIST_DIR)/tclconfig/install-sh
+
+	list='demos doc generic library mac tests unix win'; \
+	for p in $$list; do \
+	    if test -d $(srcdir)/$$p ; then \
+		mkdir $(DIST_DIR)/$$p; \
+		cp -p $(srcdir)/$$p/*.* $(DIST_DIR)/$$p/; \
+	    fi; \
+	done
+
+	(cd $(DIST_ROOT); $(COMPRESS);)
+
+#========================================================================
+# End of user-definable section
+#========================================================================
+
+#========================================================================
+# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
+# variable in configure.in
+#========================================================================
+
+clean:  
+	-test -z "$(BINARIES)" || rm -f $(BINARIES)
+	-rm -f *.$(OBJEXT) core *.core
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean: clean
+	-rm -f *.tab.c
+	-rm -f $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log config.status
+
+#========================================================================
+# Install binary object libraries.  On Windows this includes both .dll and
+# .lib files.  Because the .lib files are not explicitly listed anywhere,
+# we need to deduce their existence from the .dll file of the same name.
+# Library files go into the lib directory.
+# In addition, this will generate the pkgIndex.tcl
+# file in the install location (assuming it can find a usable tclsh shell)
+#
+# You should not have to modify this target.
+#========================================================================
+
+install-lib-binaries: binaries
+	@mkdir -p $(DESTDIR)$(pkglibdir)
+	@list='$(lib_BINARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
+	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \
+	    stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \
+	    if test "x$$stub" = "xstub"; then \
+		echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \
+		$(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \
+	    else \
+		echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \
+		$(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \
+	    fi; \
+	    ext=`echo $$p|sed -e "s/.*\.//"`; \
+	    if test "x$$ext" = "xdll"; then \
+		lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
+		if test -f $$lib; then \
+		    echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \
+	            $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
+		fi; \
+	    fi; \
+	  fi; \
+	done
+	@list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+	  if test -f $(srcdir)/$$p; then \
+	    destp=`basename $$p`; \
+	    echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
+	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
+	  fi; \
+	done
+	@if test "x$(SHARED_BUILD)" = "x1"; then \
+	    echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
+	    $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
+	fi
+
+#========================================================================
+# Install binary executables (e.g. .exe files and dependent .dll files)
+# This is for files that must go in the bin directory (located next to
+# wish and tclsh), like dependent .dll files on Windows.
+#
+# You should not have to modify this target, except to define bin_BINARIES
+# above if necessary.
+#========================================================================
+
+install-bin-binaries: binaries
+	@mkdir -p $(DESTDIR)$(bindir)
+	@list='$(bin_BINARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
+	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
+	  fi; \
+	done
+
+.SUFFIXES: .c .$(OBJEXT)
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+uninstall-binaries:
+	list='$(lib_BINARIES)'; for p in $$list; do \
+	  rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+	done
+	list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+	  p=`basename $$p`; \
+	  rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+	done
+	list='$(bin_BINARIES)'; for p in $$list; do \
+	  rm -f $(DESTDIR)$(bindir)/$$p; \
+	done
+
+.PHONY: all binaries clean depend distclean doc install libraries test
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/autoconf/tea/README b/autoconf/tea/README
new file mode 100644
index 0000000..99dc8b8
--- /dev/null
+++ b/autoconf/tea/README
@@ -0,0 +1,36 @@
+This is the SQLite extension for Tcl using the Tcl Extension
+Architecture (TEA).  For additional information on SQLite see
+
+        http://www.sqlite.org/
+
+
+UNIX BUILD
+==========
+
+Building under most UNIX systems is easy, just run the configure script
+and then run make. For more information about the build process, see
+the tcl/unix/README file in the Tcl src dist. The following minimal
+example will install the extension in the /opt/tcl directory.
+
+	$ cd sqlite-*-tea
+	$ ./configure --prefix=/opt/tcl
+	$ make
+	$ make install
+
+WINDOWS BUILD
+=============
+
+The recommended method to build extensions under windows is to use the
+Msys + Mingw build process. This provides a Unix-style build while
+generating native Windows binaries. Using the Msys + Mingw build tools
+means that you can use the same configure script as per the Unix build
+to create a Makefile. See the tcl/win/README file for the URL of
+the Msys + Mingw download.
+
+If you have VC++ then you may wish to use the files in the win
+subdirectory and build the extension using just VC++. These files have
+been designed to be as generic as possible but will require some
+additional maintenance by the project developer to synchronise with
+the TEA configure.in and Makefile.in files. Instructions for using the
+VC++ makefile are written in the first part of the Makefile.vc
+file.
diff --git a/autoconf/tea/aclocal.m4 b/autoconf/tea/aclocal.m4
new file mode 100644
index 0000000..0b05739
--- /dev/null
+++ b/autoconf/tea/aclocal.m4
@@ -0,0 +1,9 @@
+#
+# Include the TEA standard macro set
+#
+
+builtin(include,tclconfig/tcl.m4)
+
+#
+# Add here whatever m4 macros you want to define for your package
+#
diff --git a/autoconf/tea/configure.in b/autoconf/tea/configure.in
new file mode 100644
index 0000000..ec9c565
--- /dev/null
+++ b/autoconf/tea/configure.in
@@ -0,0 +1,200 @@
+#!/bin/bash -norc
+dnl	This file is an input file used by the GNU "autoconf" program to
+dnl	generate the file "configure", which is run during Tcl installation
+dnl	to configure the system for the local environment.
+#
+# RCS: @(#) $Id: configure.in,v 1.43 2005/07/26 19:17:05 mdejong Exp $
+
+#-----------------------------------------------------------------------
+# Sample configure.in for Tcl Extensions.  The only places you should
+# need to modify this file are marked by the string __CHANGE__
+#-----------------------------------------------------------------------
+
+#-----------------------------------------------------------------------
+# __CHANGE__
+# Set your package name and version numbers here.
+#
+# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION
+# set as provided.  These will also be added as -D defs in your Makefile
+# so you can encode the package version directly into the source files.
+#-----------------------------------------------------------------------
+
+AC_INIT([sqlite], [3.7.4])
+
+#--------------------------------------------------------------------
+# Call TEA_INIT as the first TEA_ macro to set up initial vars.
+# This will define a ${TEA_PLATFORM} variable == "unix" or "windows"
+# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE.
+#--------------------------------------------------------------------
+
+TEA_INIT([3.9])
+
+AC_CONFIG_AUX_DIR(tclconfig)
+
+#--------------------------------------------------------------------
+# Load the tclConfig.sh file
+#--------------------------------------------------------------------
+
+TEA_PATH_TCLCONFIG
+TEA_LOAD_TCLCONFIG
+
+#--------------------------------------------------------------------
+# Load the tkConfig.sh file if necessary (Tk extension)
+#--------------------------------------------------------------------
+
+#TEA_PATH_TKCONFIG
+#TEA_LOAD_TKCONFIG
+
+#-----------------------------------------------------------------------
+# Handle the --prefix=... option by defaulting to what Tcl gave.
+# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER.
+#-----------------------------------------------------------------------
+
+TEA_PREFIX
+
+#-----------------------------------------------------------------------
+# Standard compiler checks.
+# This sets up CC by using the CC env var, or looks for gcc otherwise.
+# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create
+# the basic setup necessary to compile executables.
+#-----------------------------------------------------------------------
+
+TEA_SETUP_COMPILER
+
+#-----------------------------------------------------------------------
+# __CHANGE__
+# Specify the C source files to compile in TEA_ADD_SOURCES,
+# public headers that need to be installed in TEA_ADD_HEADERS,
+# stub library C source files to compile in TEA_ADD_STUB_SOURCES,
+# and runtime Tcl library files in TEA_ADD_TCL_SOURCES.
+# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS
+# and PKG_TCL_SOURCES.
+#-----------------------------------------------------------------------
+
+TEA_ADD_SOURCES([tclsqlite3.c])
+TEA_ADD_HEADERS([])
+TEA_ADD_INCLUDES([-I\"`\${CYGPATH} \${srcdir}/generic`\"])
+TEA_ADD_LIBS([])
+TEA_ADD_CFLAGS([-DSQLITE_ENABLE_FTS3=1])
+TEA_ADD_CFLAGS([-DSQLITE_3_SUFFIX_ONLY=1])
+TEA_ADD_CFLAGS([-DSQLITE_ENABLE_RTREE=1])
+TEA_ADD_CFLAGS([-DSQLITE_OMIT_DEPRECATED=1])
+TEA_ADD_STUB_SOURCES([])
+TEA_ADD_TCL_SOURCES([])
+
+#--------------------------------------------------------------------
+# The --with-system-sqlite causes the TCL bindings to SQLite to use
+# the system shared library for SQLite rather than statically linking
+# against its own private copy.  This is dangerous and leads to
+# undersirable dependences and is not recommended.
+# Patchs from rmax.
+#--------------------------------------------------------------------
+AC_ARG_WITH([system-sqlite],
+ [AC_HELP_STRING([--with-system-sqlite],
+   [use a system-supplied libsqlite3 instead of the bundled one])],
+ [], [with_system_sqlite=no])
+if test x$with_system_sqlite != xno; then
+ AC_CHECK_HEADER([sqlite3.h],
+   [AC_CHECK_LIB([sqlite3],[sqlite3_initialize],
+     [AC_DEFINE(USE_SYSTEM_SQLITE)
+      LIBS="$LIBS -lsqlite3"])])
+fi
+
+#--------------------------------------------------------------------
+# __CHANGE__
+# Choose which headers you need.  Extension authors should try very
+# hard to only rely on the Tcl public header files.  Internal headers
+# contain private data structures and are subject to change without
+# notice.
+# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG
+#--------------------------------------------------------------------
+
+TEA_PUBLIC_TCL_HEADERS
+#TEA_PRIVATE_TCL_HEADERS
+
+#TEA_PUBLIC_TK_HEADERS
+#TEA_PRIVATE_TK_HEADERS
+#TEA_PATH_X
+
+#--------------------------------------------------------------------
+# Check whether --enable-threads or --disable-threads was given.
+# This auto-enables if Tcl was compiled threaded.
+#--------------------------------------------------------------------
+
+TEA_ENABLE_THREADS
+if test "${TCL_THREADS}" = "1" ; then
+    AC_DEFINE(SQLITE_THREADSAFE, 1, [Trigger sqlite threadsafe build])
+    # Not automatically added by Tcl because its assumed Tcl links to them,
+    # but it may not if it isn't really a threaded build.
+    TEA_ADD_LIBS([$THREADS_LIBS])
+else
+    AC_DEFINE(SQLITE_THREADSAFE, 0, [Trigger sqlite non-threadsafe build])
+fi
+
+#--------------------------------------------------------------------
+# The statement below defines a collection of symbols related to
+# building as a shared library instead of a static library.
+#--------------------------------------------------------------------
+
+TEA_ENABLE_SHARED
+
+#--------------------------------------------------------------------
+# This macro figures out what flags to use with the compiler/linker
+# when building shared/static debug/optimized objects.  This information
+# can be taken from the tclConfig.sh file, but this figures it all out.
+#--------------------------------------------------------------------
+
+TEA_CONFIG_CFLAGS
+
+#--------------------------------------------------------------------
+# Set the default compiler switches based on the --enable-symbols option.
+#--------------------------------------------------------------------
+
+TEA_ENABLE_SYMBOLS
+
+#--------------------------------------------------------------------
+# Everyone should be linking against the Tcl stub library.  If you
+# can't for some reason, remove this definition.  If you aren't using
+# stubs, you also need to modify the SHLIB_LD_LIBS setting below to
+# link against the non-stubbed Tcl library.  Add Tk too if necessary.
+#--------------------------------------------------------------------
+
+AC_DEFINE(USE_TCL_STUBS, 1, [Use Tcl stubs])
+#AC_DEFINE(USE_TK_STUBS, 1, [Use Tk stubs])
+
+
+#--------------------------------------------------------------------
+# Redefine fdatasync as fsync on systems that lack fdatasync
+#--------------------------------------------------------------------
+
+AC_CHECK_FUNC(fdatasync, , AC_DEFINE(fdatasync, fsync))
+
+AC_FUNC_STRERROR_R
+
+
+#--------------------------------------------------------------------
+# This macro generates a line to use when building a library.  It
+# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS,
+# and TEA_LOAD_TCLCONFIG macros above.
+#--------------------------------------------------------------------
+
+TEA_MAKE_LIB
+
+#--------------------------------------------------------------------
+# Determine the name of the tclsh and/or wish executables in the
+# Tcl and Tk build directories or the location they were installed
+# into. These paths are used to support running test cases only,
+# the Makefile should not be making use of these paths to generate
+# a pkgIndex.tcl file or anything else at extension build time.
+#--------------------------------------------------------------------
+
+TEA_PROG_TCLSH
+#TEA_PROG_WISH
+
+#--------------------------------------------------------------------
+# Finally, substitute all of the various values into the Makefile.
+# You may alternatively have a special pkgIndex.tcl.in or other files
+# which require substituting th AC variables in.  Include these here.
+#--------------------------------------------------------------------
+
+AC_OUTPUT([Makefile pkgIndex.tcl])
diff --git a/autoconf/tea/doc/sqlite3.n b/autoconf/tea/doc/sqlite3.n
new file mode 100644
index 0000000..13913e5
--- /dev/null
+++ b/autoconf/tea/doc/sqlite3.n
@@ -0,0 +1,15 @@
+.TH sqlite3 n 4.1 "Tcl-Extensions"
+.HS sqlite3 tcl
+.BS
+.SH NAME
+sqlite3 \- an interface to the SQLite3 database engine
+.SH SYNOPSIS
+\fBsqlite3\fI command_name ?filename?\fR
+.br
+.SH DESCRIPTION
+SQLite3 is a self-contains, zero-configuration, transactional SQL database
+engine.  This extension provides an easy to use interface for accessing
+SQLite database files from Tcl.
+.PP
+For full documentation see \fIhttp://www.sqlite.org/\fR and
+in particular \fIhttp://www.sqlite.org/tclsqlite.html\fR.
diff --git a/autoconf/tea/license.terms b/autoconf/tea/license.terms
new file mode 100644
index 0000000..723c4cd
--- /dev/null
+++ b/autoconf/tea/license.terms
@@ -0,0 +1,6 @@
+The author disclaims copyright to this source code.  In place of
+a legal notice, here is a blessing:
+
+    May you do good and not evil.
+    May you find forgiveness for yourself and forgive others.
+    May you share freely, never taking more than you give.
diff --git a/autoconf/tea/pkgIndex.tcl.in b/autoconf/tea/pkgIndex.tcl.in
new file mode 100644
index 0000000..bc585f7
--- /dev/null
+++ b/autoconf/tea/pkgIndex.tcl.in
@@ -0,0 +1,7 @@
+#
+# Tcl package index file
+#
+# Note sqlite*3* init specifically
+#
+package ifneeded sqlite3 @PACKAGE_VERSION@ \
+    [list load [file join $dir @PKG_LIB_FILE@] Sqlite3]
diff --git a/autoconf/tea/tclconfig/install-sh b/autoconf/tea/tclconfig/install-sh
new file mode 100644
index 0000000..7c34c3f
--- /dev/null
+++ b/autoconf/tea/tclconfig/install-sh
@@ -0,0 +1,528 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-04-20.01; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -S            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+	shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
+
+    -o) chowncmd="$chownprog $2"
+	shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -S) stripcmd="$stripprog $2"
+	shift;;
+
+    -t) dst_arg=$2
+	shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dst_arg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/autoconf/tea/tclconfig/tcl.m4 b/autoconf/tea/tclconfig/tcl.m4
new file mode 100644
index 0000000..66214e7
--- /dev/null
+++ b/autoconf/tea/tclconfig/tcl.m4
@@ -0,0 +1,4165 @@
+# tcl.m4 --
+#
+#	This file provides a set of autoconf macros to help TEA-enable
+#	a Tcl extension.
+#
+# Copyright (c) 1999-2000 Ajuba Solutions.
+# Copyright (c) 2002-2005 ActiveState Corporation.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+
+AC_PREREQ(2.57)
+
+dnl TEA extensions pass us the version of TEA they think they
+dnl are compatible with (must be set in TEA_INIT below)
+dnl TEA_VERSION="3.9"
+
+# Possible values for key variables defined:
+#
+# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem')
+# TEA_PLATFORM        - windows unix
+#
+
+#------------------------------------------------------------------------
+# TEA_PATH_TCLCONFIG --
+#
+#	Locate the tclConfig.sh file and perform a sanity check on
+#	the Tcl compile flags
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--with-tcl=...
+#
+#	Defines the following vars:
+#		TCL_BIN_DIR	Full path to the directory containing
+#				the tclConfig.sh file
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PATH_TCLCONFIG], [
+    dnl TEA specific: Make sure we are initialized
+    AC_REQUIRE([TEA_INIT])
+    #
+    # Ok, lets find the tcl configuration
+    # First, look for one uninstalled.
+    # the alternative search directory is invoked by --with-tcl
+    #
+
+    if test x"${no_tcl}" = x ; then
+	# we reset no_tcl in case something fails here
+	no_tcl=true
+	AC_ARG_WITH(tcl,
+	    AC_HELP_STRING([--with-tcl],
+		[directory containing tcl configuration (tclConfig.sh)]),
+	    with_tclconfig="${withval}")
+	AC_MSG_CHECKING([for Tcl configuration])
+	AC_CACHE_VAL(ac_cv_c_tclconfig,[
+
+	    # First check to see if --with-tcl was specified.
+	    if test x"${with_tclconfig}" != x ; then
+		case "${with_tclconfig}" in
+		    */tclConfig.sh )
+			if test -f "${with_tclconfig}"; then
+			    AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself])
+			    with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`"
+			fi ;;
+		esac
+		if test -f "${with_tclconfig}/tclConfig.sh" ; then
+		    ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`"
+		else
+		    AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh])
+		fi
+	    fi
+
+	    # then check for a private Tcl installation
+	    if test x"${ac_cv_c_tclconfig}" = x ; then
+		for i in \
+			../tcl \
+			`ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+			`ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \
+			`ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
+			../../tcl \
+			`ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+			`ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
+			`ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
+			../../../tcl \
+			`ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+			`ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
+			`ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
+		    if test "${TEA_PLATFORM}" = "windows" \
+			    -a -f "$i/win/tclConfig.sh" ; then
+			ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
+			break
+		    fi
+		    if test -f "$i/unix/tclConfig.sh" ; then
+			ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
+			break
+		    fi
+		done
+	    fi
+
+	    # on Darwin, check in Framework installation locations
+	    if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then
+		for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
+			`ls -d /Library/Frameworks 2>/dev/null` \
+			`ls -d /Network/Library/Frameworks 2>/dev/null` \
+			`ls -d /System/Library/Frameworks 2>/dev/null` \
+			; do
+		    if test -f "$i/Tcl.framework/tclConfig.sh" ; then
+			ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`"
+			break
+		    fi
+		done
+	    fi
+
+	    # TEA specific: on Windows, check in common installation locations
+	    if test "${TEA_PLATFORM}" = "windows" \
+		-a x"${ac_cv_c_tclconfig}" = x ; then
+		for i in `ls -d C:/Tcl/lib 2>/dev/null` \
+			`ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
+			; do
+		    if test -f "$i/tclConfig.sh" ; then
+			ac_cv_c_tclconfig="`(cd $i; pwd)`"
+			break
+		    fi
+		done
+	    fi
+
+	    # check in a few common install locations
+	    if test x"${ac_cv_c_tclconfig}" = x ; then
+		for i in `ls -d ${libdir} 2>/dev/null` \
+			`ls -d ${exec_prefix}/lib 2>/dev/null` \
+			`ls -d ${prefix}/lib 2>/dev/null` \
+			`ls -d /usr/local/lib 2>/dev/null` \
+			`ls -d /usr/contrib/lib 2>/dev/null` \
+			`ls -d /usr/lib 2>/dev/null` \
+			`ls -d /usr/lib64 2>/dev/null` \
+			`ls -d /usr/lib/tcl8.6 2>/dev/null` \
+			`ls -d /usr/lib/tcl8.5 2>/dev/null` \
+			; do
+		    if test -f "$i/tclConfig.sh" ; then
+			ac_cv_c_tclconfig="`(cd $i; pwd)`"
+			break
+		    fi
+		done
+	    fi
+
+	    # check in a few other private locations
+	    if test x"${ac_cv_c_tclconfig}" = x ; then
+		for i in \
+			${srcdir}/../tcl \
+			`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+			`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \
+			`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
+		    if test "${TEA_PLATFORM}" = "windows" \
+			    -a -f "$i/win/tclConfig.sh" ; then
+			ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
+			break
+		    fi
+		    if test -f "$i/unix/tclConfig.sh" ; then
+			ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
+			break
+		    fi
+		done
+	    fi
+	])
+
+	if test x"${ac_cv_c_tclconfig}" = x ; then
+	    TCL_BIN_DIR="# no Tcl configs found"
+	    AC_MSG_ERROR([Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh])
+	else
+	    no_tcl=
+	    TCL_BIN_DIR="${ac_cv_c_tclconfig}"
+	    AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh])
+	fi
+    fi
+])
+
+#------------------------------------------------------------------------
+# TEA_PATH_TKCONFIG --
+#
+#	Locate the tkConfig.sh file
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--with-tk=...
+#
+#	Defines the following vars:
+#		TK_BIN_DIR	Full path to the directory containing
+#				the tkConfig.sh file
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PATH_TKCONFIG], [
+    #
+    # Ok, lets find the tk configuration
+    # First, look for one uninstalled.
+    # the alternative search directory is invoked by --with-tk
+    #
+
+    if test x"${no_tk}" = x ; then
+	# we reset no_tk in case something fails here
+	no_tk=true
+	AC_ARG_WITH(tk,
+	    AC_HELP_STRING([--with-tk],
+		[directory containing tk configuration (tkConfig.sh)]),
+	    with_tkconfig="${withval}")
+	AC_MSG_CHECKING([for Tk configuration])
+	AC_CACHE_VAL(ac_cv_c_tkconfig,[
+
+	    # First check to see if --with-tkconfig was specified.
+	    if test x"${with_tkconfig}" != x ; then
+		case "${with_tkconfig}" in
+		    */tkConfig.sh )
+			if test -f "${with_tkconfig}"; then
+			    AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself])
+			    with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`"
+			fi ;;
+		esac
+		if test -f "${with_tkconfig}/tkConfig.sh" ; then
+		    ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`"
+		else
+		    AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh])
+		fi
+	    fi
+
+	    # then check for a private Tk library
+	    if test x"${ac_cv_c_tkconfig}" = x ; then
+		for i in \
+			../tk \
+			`ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+			`ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \
+			`ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \
+			../../tk \
+			`ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+			`ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \
+			`ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \
+			../../../tk \
+			`ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+			`ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \
+			`ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
+		    if test "${TEA_PLATFORM}" = "windows" \
+			    -a -f "$i/win/tkConfig.sh" ; then
+			ac_cv_c_tkconfig="`(cd $i/win; pwd)`"
+			break
+		    fi
+		    if test -f "$i/unix/tkConfig.sh" ; then
+			ac_cv_c_tkconfig="`(cd $i/unix; pwd)`"
+			break
+		    fi
+		done
+	    fi
+
+	    # on Darwin, check in Framework installation locations
+	    if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then
+		for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
+			`ls -d /Library/Frameworks 2>/dev/null` \
+			`ls -d /Network/Library/Frameworks 2>/dev/null` \
+			`ls -d /System/Library/Frameworks 2>/dev/null` \
+			; do
+		    if test -f "$i/Tk.framework/tkConfig.sh" ; then
+			ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`"
+			break
+		    fi
+		done
+	    fi
+
+	    # check in a few common install locations
+	    if test x"${ac_cv_c_tkconfig}" = x ; then
+		for i in `ls -d ${libdir} 2>/dev/null` \
+			`ls -d ${exec_prefix}/lib 2>/dev/null` \
+			`ls -d ${prefix}/lib 2>/dev/null` \
+			`ls -d /usr/local/lib 2>/dev/null` \
+			`ls -d /usr/contrib/lib 2>/dev/null` \
+			`ls -d /usr/lib 2>/dev/null` \
+			`ls -d /usr/lib64 2>/dev/null` \
+			; do
+		    if test -f "$i/tkConfig.sh" ; then
+			ac_cv_c_tkconfig="`(cd $i; pwd)`"
+			break
+		    fi
+		done
+	    fi
+
+	    # TEA specific: on Windows, check in common installation locations
+	    if test "${TEA_PLATFORM}" = "windows" \
+		-a x"${ac_cv_c_tkconfig}" = x ; then
+		for i in `ls -d C:/Tcl/lib 2>/dev/null` \
+			`ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
+			; do
+		    if test -f "$i/tkConfig.sh" ; then
+			ac_cv_c_tkconfig="`(cd $i; pwd)`"
+			break
+		    fi
+		done
+	    fi
+
+	    # check in a few other private locations
+	    if test x"${ac_cv_c_tkconfig}" = x ; then
+		for i in \
+			${srcdir}/../tk \
+			`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+			`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \
+			`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
+		    if test "${TEA_PLATFORM}" = "windows" \
+			    -a -f "$i/win/tkConfig.sh" ; then
+			ac_cv_c_tkconfig="`(cd $i/win; pwd)`"
+			break
+		    fi
+		    if test -f "$i/unix/tkConfig.sh" ; then
+			ac_cv_c_tkconfig="`(cd $i/unix; pwd)`"
+			break
+		    fi
+		done
+	    fi
+	])
+
+	if test x"${ac_cv_c_tkconfig}" = x ; then
+	    TK_BIN_DIR="# no Tk configs found"
+	    AC_MSG_ERROR([Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh])
+	else
+	    no_tk=
+	    TK_BIN_DIR="${ac_cv_c_tkconfig}"
+	    AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh])
+	fi
+    fi
+])
+
+#------------------------------------------------------------------------
+# TEA_LOAD_TCLCONFIG --
+#
+#	Load the tclConfig.sh file
+#
+# Arguments:
+#
+#	Requires the following vars to be set:
+#		TCL_BIN_DIR
+#
+# Results:
+#
+#	Substitutes the following vars:
+#		TCL_BIN_DIR
+#		TCL_SRC_DIR
+#		TCL_LIB_FILE
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_LOAD_TCLCONFIG], [
+    AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh])
+
+    if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then
+        AC_MSG_RESULT([loading])
+	. "${TCL_BIN_DIR}/tclConfig.sh"
+    else
+        AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh])
+    fi
+
+    # eval is required to do the TCL_DBGX substitution
+    eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\""
+    eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\""
+
+    # If the TCL_BIN_DIR is the build directory (not the install directory),
+    # then set the common variable name to the value of the build variables.
+    # For example, the variable TCL_LIB_SPEC will be set to the value
+    # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC
+    # instead of TCL_BUILD_LIB_SPEC since it will work with both an
+    # installed and uninstalled version of Tcl.
+    if test -f "${TCL_BIN_DIR}/Makefile" ; then
+        TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}"
+        TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}"
+        TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}"
+    elif test "`uname -s`" = "Darwin"; then
+	# If Tcl was built as a framework, attempt to use the libraries
+	# from the framework at the given location so that linking works
+	# against Tcl.framework installed in an arbitrary location.
+	case ${TCL_DEFS} in
+	    *TCL_FRAMEWORK*)
+		if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then
+		    for i in "`cd "${TCL_BIN_DIR}"; pwd`" \
+			     "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do
+			if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then
+			    TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}"
+			    break
+			fi
+		    done
+		fi
+		if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then
+		    TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}"  | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}"
+		    TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"
+		fi
+		;;
+	esac
+    fi
+
+    # eval is required to do the TCL_DBGX substitution
+    eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\""
+    eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\""
+    eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\""
+    eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\""
+
+    AC_SUBST(TCL_VERSION)
+    AC_SUBST(TCL_PATCH_LEVEL)
+    AC_SUBST(TCL_BIN_DIR)
+    AC_SUBST(TCL_SRC_DIR)
+
+    AC_SUBST(TCL_LIB_FILE)
+    AC_SUBST(TCL_LIB_FLAG)
+    AC_SUBST(TCL_LIB_SPEC)
+
+    AC_SUBST(TCL_STUB_LIB_FILE)
+    AC_SUBST(TCL_STUB_LIB_FLAG)
+    AC_SUBST(TCL_STUB_LIB_SPEC)
+
+    AC_MSG_CHECKING([platform])
+    hold_cc=$CC; CC="$TCL_CC"
+    AC_TRY_COMPILE(,[
+	    #ifdef _WIN32
+		#error win32
+	    #endif
+    ], TEA_PLATFORM="unix",
+	    TEA_PLATFORM="windows"
+    )
+    CC=$hold_cc
+    AC_MSG_RESULT($TEA_PLATFORM)
+
+    # The BUILD_$pkg is to define the correct extern storage class
+    # handling when making this package
+    AC_DEFINE_UNQUOTED(BUILD_${PACKAGE_NAME}, [],
+	    [Building extension source?])
+    # Do this here as we have fully defined TEA_PLATFORM now
+    if test "${TEA_PLATFORM}" = "windows" ; then
+	EXEEXT=".exe"
+	CLEANFILES="$CLEANFILES *.lib *.dll *.pdb *.exp"
+    fi
+
+    # TEA specific:
+    AC_SUBST(CLEANFILES)
+    AC_SUBST(TCL_LIBS)
+    AC_SUBST(TCL_DEFS)
+    AC_SUBST(TCL_EXTRA_CFLAGS)
+    AC_SUBST(TCL_LD_FLAGS)
+    AC_SUBST(TCL_SHLIB_LD_LIBS)
+])
+
+#------------------------------------------------------------------------
+# TEA_LOAD_TKCONFIG --
+#
+#	Load the tkConfig.sh file
+#
+# Arguments:
+#
+#	Requires the following vars to be set:
+#		TK_BIN_DIR
+#
+# Results:
+#
+#	Sets the following vars that should be in tkConfig.sh:
+#		TK_BIN_DIR
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_LOAD_TKCONFIG], [
+    AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh])
+
+    if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then
+        AC_MSG_RESULT([loading])
+	. "${TK_BIN_DIR}/tkConfig.sh"
+    else
+        AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh])
+    fi
+
+    # eval is required to do the TK_DBGX substitution
+    eval "TK_LIB_FILE=\"${TK_LIB_FILE}\""
+    eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\""
+
+    # If the TK_BIN_DIR is the build directory (not the install directory),
+    # then set the common variable name to the value of the build variables.
+    # For example, the variable TK_LIB_SPEC will be set to the value
+    # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC
+    # instead of TK_BUILD_LIB_SPEC since it will work with both an
+    # installed and uninstalled version of Tcl.
+    if test -f "${TK_BIN_DIR}/Makefile" ; then
+        TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}"
+        TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}"
+        TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}"
+    elif test "`uname -s`" = "Darwin"; then
+	# If Tk was built as a framework, attempt to use the libraries
+	# from the framework at the given location so that linking works
+	# against Tk.framework installed in an arbitrary location.
+	case ${TK_DEFS} in
+	    *TK_FRAMEWORK*)
+		if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then
+		    for i in "`cd "${TK_BIN_DIR}"; pwd`" \
+			     "`cd "${TK_BIN_DIR}"/../..; pwd`"; do
+			if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then
+			    TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}"
+			    break
+			fi
+		    done
+		fi
+		if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then
+		    TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}"  | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}"
+		    TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"
+		fi
+		;;
+	esac
+    fi
+
+    # eval is required to do the TK_DBGX substitution
+    eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\""
+    eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\""
+    eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\""
+    eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\""
+
+    # TEA specific: Ensure windowingsystem is defined
+    if test "${TEA_PLATFORM}" = "unix" ; then
+	case ${TK_DEFS} in
+	    *MAC_OSX_TK*)
+		AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?])
+		TEA_WINDOWINGSYSTEM="aqua"
+		;;
+	    *)
+		TEA_WINDOWINGSYSTEM="x11"
+		;;
+	esac
+    elif test "${TEA_PLATFORM}" = "windows" ; then
+	TEA_WINDOWINGSYSTEM="win32"
+    fi
+
+    AC_SUBST(TK_VERSION)
+    AC_SUBST(TK_BIN_DIR)
+    AC_SUBST(TK_SRC_DIR)
+
+    AC_SUBST(TK_LIB_FILE)
+    AC_SUBST(TK_LIB_FLAG)
+    AC_SUBST(TK_LIB_SPEC)
+
+    AC_SUBST(TK_STUB_LIB_FILE)
+    AC_SUBST(TK_STUB_LIB_FLAG)
+    AC_SUBST(TK_STUB_LIB_SPEC)
+
+    # TEA specific:
+    AC_SUBST(TK_LIBS)
+    AC_SUBST(TK_XINCLUDES)
+])
+
+#------------------------------------------------------------------------
+# TEA_PROG_TCLSH
+#	Determine the fully qualified path name of the tclsh executable
+#	in the Tcl build directory or the tclsh installed in a bin
+#	directory. This macro will correctly determine the name
+#	of the tclsh executable even if tclsh has not yet been
+#	built in the build directory. The tclsh found is always
+#	associated with a tclConfig.sh file. This tclsh should be used
+#	only for running extension test cases. It should never be
+#	or generation of files (like pkgIndex.tcl) at build time.
+#
+# Arguments:
+#	none
+#
+# Results:
+#	Substitutes the following vars:
+#		TCLSH_PROG
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PROG_TCLSH], [
+    AC_MSG_CHECKING([for tclsh])
+    if test -f "${TCL_BIN_DIR}/Makefile" ; then
+        # tclConfig.sh is in Tcl build directory
+        if test "${TEA_PLATFORM}" = "windows"; then
+            TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
+        else
+            TCLSH_PROG="${TCL_BIN_DIR}/tclsh"
+        fi
+    else
+        # tclConfig.sh is in install location
+        if test "${TEA_PLATFORM}" = "windows"; then
+            TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
+        else
+            TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}"
+        fi
+        list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \
+              `ls -d ${TCL_BIN_DIR}/..     2>/dev/null` \
+              `ls -d ${TCL_PREFIX}/bin     2>/dev/null`"
+        for i in $list ; do
+            if test -f "$i/${TCLSH_PROG}" ; then
+                REAL_TCL_BIN_DIR="`cd "$i"; pwd`/"
+                break
+            fi
+        done
+        TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}"
+    fi
+    AC_MSG_RESULT([${TCLSH_PROG}])
+    AC_SUBST(TCLSH_PROG)
+])
+
+#------------------------------------------------------------------------
+# TEA_PROG_WISH
+#	Determine the fully qualified path name of the wish executable
+#	in the Tk build directory or the wish installed in a bin
+#	directory. This macro will correctly determine the name
+#	of the wish executable even if wish has not yet been
+#	built in the build directory. The wish found is always
+#	associated with a tkConfig.sh file. This wish should be used
+#	only for running extension test cases. It should never be
+#	or generation of files (like pkgIndex.tcl) at build time.
+#
+# Arguments:
+#	none
+#
+# Results:
+#	Substitutes the following vars:
+#		WISH_PROG
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PROG_WISH], [
+    AC_MSG_CHECKING([for wish])
+    if test -f "${TK_BIN_DIR}/Makefile" ; then
+        # tkConfig.sh is in Tk build directory
+        if test "${TEA_PLATFORM}" = "windows"; then
+            WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}"
+        else
+            WISH_PROG="${TK_BIN_DIR}/wish"
+        fi
+    else
+        # tkConfig.sh is in install location
+        if test "${TEA_PLATFORM}" = "windows"; then
+            WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}"
+        else
+            WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}"
+        fi
+        list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \
+              `ls -d ${TK_BIN_DIR}/..     2>/dev/null` \
+              `ls -d ${TK_PREFIX}/bin     2>/dev/null`"
+        for i in $list ; do
+            if test -f "$i/${WISH_PROG}" ; then
+                REAL_TK_BIN_DIR="`cd "$i"; pwd`/"
+                break
+            fi
+        done
+        WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}"
+    fi
+    AC_MSG_RESULT([${WISH_PROG}])
+    AC_SUBST(WISH_PROG)
+])
+
+#------------------------------------------------------------------------
+# TEA_ENABLE_SHARED --
+#
+#	Allows the building of shared libraries
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--enable-shared=yes|no
+#
+#	Defines the following vars:
+#		STATIC_BUILD	Used for building import/export libraries
+#				on Windows.
+#
+#	Sets the following vars:
+#		SHARED_BUILD	Value of 1 or 0
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_ENABLE_SHARED], [
+    AC_MSG_CHECKING([how to build libraries])
+    AC_ARG_ENABLE(shared,
+	AC_HELP_STRING([--enable-shared],
+	    [build and link with shared libraries (default: on)]),
+	[tcl_ok=$enableval], [tcl_ok=yes])
+
+    if test "${enable_shared+set}" = set; then
+	enableval="$enable_shared"
+	tcl_ok=$enableval
+    else
+	tcl_ok=yes
+    fi
+
+    if test "$tcl_ok" = "yes" ; then
+	AC_MSG_RESULT([shared])
+	SHARED_BUILD=1
+    else
+	AC_MSG_RESULT([static])
+	SHARED_BUILD=0
+	AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?])
+    fi
+    AC_SUBST(SHARED_BUILD)
+])
+
+#------------------------------------------------------------------------
+# TEA_ENABLE_THREADS --
+#
+#	Specify if thread support should be enabled.  If "yes" is specified
+#	as an arg (optional), threads are enabled by default, "no" means
+#	threads are disabled.  "yes" is the default.
+#
+#	TCL_THREADS is checked so that if you are compiling an extension
+#	against a threaded core, your extension must be compiled threaded
+#	as well.
+#
+#	Note that it is legal to have a thread enabled extension run in a
+#	threaded or non-threaded Tcl core, but a non-threaded extension may
+#	only run in a non-threaded Tcl core.
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--enable-threads
+#
+#	Sets the following vars:
+#		THREADS_LIBS	Thread library(s)
+#
+#	Defines the following vars:
+#		TCL_THREADS
+#		_REENTRANT
+#		_THREAD_SAFE
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_ENABLE_THREADS], [
+    AC_ARG_ENABLE(threads,
+	AC_HELP_STRING([--enable-threads],
+	    [build with threads]),
+	[tcl_ok=$enableval], [tcl_ok=yes])
+
+    if test "${enable_threads+set}" = set; then
+	enableval="$enable_threads"
+	tcl_ok=$enableval
+    else
+	tcl_ok=yes
+    fi
+
+    if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then
+	TCL_THREADS=1
+
+	if test "${TEA_PLATFORM}" != "windows" ; then
+	    # We are always OK on Windows, so check what this platform wants:
+
+	    # USE_THREAD_ALLOC tells us to try the special thread-based
+	    # allocator that significantly reduces lock contention
+	    AC_DEFINE(USE_THREAD_ALLOC, 1,
+		[Do we want to use the threaded memory allocator?])
+	    AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
+	    if test "`uname -s`" = "SunOS" ; then
+		AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
+			[Do we really want to follow the standard? Yes we do!])
+	    fi
+	    AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?])
+	    AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no)
+	    if test "$tcl_ok" = "no"; then
+		# Check a little harder for __pthread_mutex_init in the same
+		# library, as some systems hide it there until pthread.h is
+		# defined.  We could alternatively do an AC_TRY_COMPILE with
+		# pthread.h, but that will work with libpthread really doesn't
+		# exist, like AIX 4.2.  [Bug: 4359]
+		AC_CHECK_LIB(pthread, __pthread_mutex_init,
+		    tcl_ok=yes, tcl_ok=no)
+	    fi
+
+	    if test "$tcl_ok" = "yes"; then
+		# The space is needed
+		THREADS_LIBS=" -lpthread"
+	    else
+		AC_CHECK_LIB(pthreads, pthread_mutex_init,
+		    tcl_ok=yes, tcl_ok=no)
+		if test "$tcl_ok" = "yes"; then
+		    # The space is needed
+		    THREADS_LIBS=" -lpthreads"
+		else
+		    AC_CHECK_LIB(c, pthread_mutex_init,
+			tcl_ok=yes, tcl_ok=no)
+		    if test "$tcl_ok" = "no"; then
+			AC_CHECK_LIB(c_r, pthread_mutex_init,
+			    tcl_ok=yes, tcl_ok=no)
+			if test "$tcl_ok" = "yes"; then
+			    # The space is needed
+			    THREADS_LIBS=" -pthread"
+			else
+			    TCL_THREADS=0
+			    AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled])
+			fi
+		    fi
+		fi
+	    fi
+	fi
+    else
+	TCL_THREADS=0
+    fi
+    # Do checking message here to not mess up interleaved configure output
+    AC_MSG_CHECKING([for building with threads])
+    if test "${TCL_THREADS}" = 1; then
+	AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?])
+	AC_MSG_RESULT([yes (default)])
+    else
+	AC_MSG_RESULT([no])
+    fi
+    # TCL_THREADS sanity checking.  See if our request for building with
+    # threads is the same as the way Tcl was built.  If not, warn the user.
+    case ${TCL_DEFS} in
+	*THREADS=1*)
+	    if test "${TCL_THREADS}" = "0"; then
+		AC_MSG_WARN([
+    Building ${PACKAGE_NAME} without threads enabled, but building against Tcl
+    that IS thread-enabled.  It is recommended to use --enable-threads.])
+	    fi
+	    ;;
+	*)
+	    if test "${TCL_THREADS}" = "1"; then
+		AC_MSG_WARN([
+    --enable-threads requested, but building against a Tcl that is NOT
+    thread-enabled.  This is an OK configuration that will also run in
+    a thread-enabled core.])
+	    fi
+	    ;;
+    esac
+    AC_SUBST(TCL_THREADS)
+])
+
+#------------------------------------------------------------------------
+# TEA_ENABLE_SYMBOLS --
+#
+#	Specify if debugging symbols should be used.
+#	Memory (TCL_MEM_DEBUG) debugging can also be enabled.
+#
+# Arguments:
+#	none
+#
+#	TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives
+#	the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted.
+#	Requires the following vars to be set in the Makefile:
+#		CFLAGS_DEFAULT
+#		LDFLAGS_DEFAULT
+#
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--enable-symbols
+#
+#	Defines the following vars:
+#		CFLAGS_DEFAULT	Sets to $(CFLAGS_DEBUG) if true
+#				Sets to "$(CFLAGS_OPTIMIZE) -DNDEBUG" if false
+#		LDFLAGS_DEFAULT	Sets to $(LDFLAGS_DEBUG) if true
+#				Sets to $(LDFLAGS_OPTIMIZE) if false
+#		DBGX		Formerly used as debug library extension;
+#				always blank now.
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_ENABLE_SYMBOLS], [
+    dnl TEA specific: Make sure we are initialized
+    AC_REQUIRE([TEA_CONFIG_CFLAGS])
+    AC_MSG_CHECKING([for build with symbols])
+    AC_ARG_ENABLE(symbols,
+	AC_HELP_STRING([--enable-symbols],
+	    [build with debugging symbols (default: off)]),
+	[tcl_ok=$enableval], [tcl_ok=no])
+    DBGX=""
+    if test "$tcl_ok" = "no"; then
+	CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE} -DNDEBUG"
+	LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}"
+	AC_MSG_RESULT([no])
+    else
+	CFLAGS_DEFAULT="${CFLAGS_DEBUG}"
+	LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}"
+	if test "$tcl_ok" = "yes"; then
+	    AC_MSG_RESULT([yes (standard debugging)])
+	fi
+    fi
+    # TEA specific:
+    if test "${TEA_PLATFORM}" != "windows" ; then
+	LDFLAGS_DEFAULT="${LDFLAGS}"
+    fi
+    AC_SUBST(CFLAGS_DEFAULT)
+    AC_SUBST(LDFLAGS_DEFAULT)
+    AC_SUBST(TCL_DBGX)
+
+    if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then
+	AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?])
+    fi
+
+    if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then
+	if test "$tcl_ok" = "all"; then
+	    AC_MSG_RESULT([enabled symbols mem debugging])
+	else
+	    AC_MSG_RESULT([enabled $tcl_ok debugging])
+	fi
+    fi
+])
+
+#------------------------------------------------------------------------
+# TEA_ENABLE_LANGINFO --
+#
+#	Allows use of modern nl_langinfo check for better l10n.
+#	This is only relevant for Unix.
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--enable-langinfo=yes|no (default is yes)
+#
+#	Defines the following vars:
+#		HAVE_LANGINFO	Triggers use of nl_langinfo if defined.
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_ENABLE_LANGINFO], [
+    AC_ARG_ENABLE(langinfo,
+	AC_HELP_STRING([--enable-langinfo],
+	    [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]),
+	[langinfo_ok=$enableval], [langinfo_ok=yes])
+
+    HAVE_LANGINFO=0
+    if test "$langinfo_ok" = "yes"; then
+	AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no])
+    fi
+    AC_MSG_CHECKING([whether to use nl_langinfo])
+    if test "$langinfo_ok" = "yes"; then
+	AC_CACHE_VAL(tcl_cv_langinfo_h, [
+	    AC_TRY_COMPILE([#include <langinfo.h>], [nl_langinfo(CODESET);],
+		    [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])])
+	AC_MSG_RESULT([$tcl_cv_langinfo_h])
+	if test $tcl_cv_langinfo_h = yes; then
+	    AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?])
+	fi
+    else
+	AC_MSG_RESULT([$langinfo_ok])
+    fi
+])
+
+#--------------------------------------------------------------------
+# TEA_CONFIG_SYSTEM
+#
+#	Determine what the system is (some things cannot be easily checked
+#	on a feature-driven basis, alas). This can usually be done via the
+#	"uname" command.
+#
+# Arguments:
+#	none
+#
+# Results:
+#	Defines the following var:
+#
+#	system -	System/platform/version identification code.
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_CONFIG_SYSTEM], [
+    AC_CACHE_CHECK([system version], tcl_cv_sys_version, [
+	# TEA specific:
+	if test "${TEA_PLATFORM}" = "windows" ; then
+	    tcl_cv_sys_version=windows
+	else
+	    tcl_cv_sys_version=`uname -s`-`uname -r`
+	    if test "$?" -ne 0 ; then
+		AC_MSG_WARN([can't find uname command])
+		tcl_cv_sys_version=unknown
+	    else
+		if test "`uname -s`" = "AIX" ; then
+		    tcl_cv_sys_version=AIX-`uname -v`.`uname -r`
+		fi
+	    fi
+	fi
+    ])
+    system=$tcl_cv_sys_version
+])
+
+#--------------------------------------------------------------------
+# TEA_CONFIG_CFLAGS
+#
+#	Try to determine the proper flags to pass to the compiler
+#	for building shared libraries and other such nonsense.
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Defines and substitutes the following vars:
+#
+#	DL_OBJS, DL_LIBS - removed for TEA, only needed by core.
+#       LDFLAGS -      Flags to pass to the compiler when linking object
+#                       files into an executable application binary such
+#                       as tclsh.
+#       LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib",
+#                       that tell the run-time dynamic linker where to look
+#                       for shared libraries such as libtcl.so.  Depends on
+#                       the variable LIB_RUNTIME_DIR in the Makefile. Could
+#                       be the same as CC_SEARCH_FLAGS if ${CC} is used to link.
+#       CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib",
+#                       that tell the run-time dynamic linker where to look
+#                       for shared libraries such as libtcl.so.  Depends on
+#                       the variable LIB_RUNTIME_DIR in the Makefile.
+#       SHLIB_CFLAGS -  Flags to pass to cc when compiling the components
+#                       of a shared library (may request position-independent
+#                       code, among other things).
+#       SHLIB_LD -      Base command to use for combining object files
+#                       into a shared library.
+#       SHLIB_LD_LIBS - Dependent libraries for the linker to scan when
+#                       creating shared libraries.  This symbol typically
+#                       goes at the end of the "ld" commands that build
+#                       shared libraries. The value of the symbol defaults to
+#                       "${LIBS}" if all of the dependent libraries should
+#                       be specified when creating a shared library.  If
+#                       dependent libraries should not be specified (as on
+#                       SunOS 4.x, where they cause the link to fail, or in
+#                       general if Tcl and Tk aren't themselves shared
+#                       libraries), then this symbol has an empty string
+#                       as its value.
+#       SHLIB_SUFFIX -  Suffix to use for the names of dynamically loadable
+#                       extensions.  An empty string means we don't know how
+#                       to use shared libraries on this platform.
+#       LIB_SUFFIX -    Specifies everything that comes after the "libfoo"
+#                       in a static or shared library name, using the $PACKAGE_VERSION variable
+#                       to put the version in the right place.  This is used
+#                       by platforms that need non-standard library names.
+#                       Examples:  ${PACKAGE_VERSION}.so.1.1 on NetBSD, since it needs
+#                       to have a version after the .so, and ${PACKAGE_VERSION}.a
+#                       on AIX, since a shared library needs to have
+#                       a .a extension whereas shared objects for loadable
+#                       extensions have a .so extension.  Defaults to
+#                       ${PACKAGE_VERSION}${SHLIB_SUFFIX}.
+#	CFLAGS_DEBUG -
+#			Flags used when running the compiler in debug mode
+#	CFLAGS_OPTIMIZE -
+#			Flags used when running the compiler in optimize mode
+#	CFLAGS -	Additional CFLAGS added as necessary (usually 64-bit)
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_CONFIG_CFLAGS], [
+    dnl TEA specific: Make sure we are initialized
+    AC_REQUIRE([TEA_INIT])
+
+    # Step 0.a: Enable 64 bit support?
+
+    AC_MSG_CHECKING([if 64bit support is requested])
+    AC_ARG_ENABLE(64bit,
+	AC_HELP_STRING([--enable-64bit],
+	    [enable 64bit support (default: off)]),
+	[do64bit=$enableval], [do64bit=no])
+    AC_MSG_RESULT([$do64bit])
+
+    # Step 0.b: Enable Solaris 64 bit VIS support?
+
+    AC_MSG_CHECKING([if 64bit Sparc VIS support is requested])
+    AC_ARG_ENABLE(64bit-vis,
+	AC_HELP_STRING([--enable-64bit-vis],
+	    [enable 64bit Sparc VIS support (default: off)]),
+	[do64bitVIS=$enableval], [do64bitVIS=no])
+    AC_MSG_RESULT([$do64bitVIS])
+    # Force 64bit on with VIS
+    AS_IF([test "$do64bitVIS" = "yes"], [do64bit=yes])
+
+    # Step 0.c: Check if visibility support is available. Do this here so
+    # that platform specific alternatives can be used below if this fails.
+
+    AC_CACHE_CHECK([if compiler supports visibility "hidden"],
+	tcl_cv_cc_visibility_hidden, [
+	hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror"
+	AC_TRY_LINK([
+	    extern __attribute__((__visibility__("hidden"))) void f(void);
+	    void f(void) {}], [f();], tcl_cv_cc_visibility_hidden=yes,
+	    tcl_cv_cc_visibility_hidden=no)
+	CFLAGS=$hold_cflags])
+    AS_IF([test $tcl_cv_cc_visibility_hidden = yes], [
+	AC_DEFINE(MODULE_SCOPE,
+	    [extern __attribute__((__visibility__("hidden")))],
+	    [Compiler support for module scope symbols])
+	AC_DEFINE(HAVE_HIDDEN, [1], [Compiler support for module scope symbols])
+    ])
+
+    # Step 0.d: Disable -rpath support?
+
+    AC_MSG_CHECKING([if rpath support is requested])
+    AC_ARG_ENABLE(rpath,
+	AC_HELP_STRING([--disable-rpath],
+	    [disable rpath support (default: on)]),
+	[doRpath=$enableval], [doRpath=yes])
+    AC_MSG_RESULT([$doRpath])
+
+    # TEA specific: Cross-compiling options for Windows/CE builds?
+
+    AS_IF([test "${TEA_PLATFORM}" = windows], [
+	AC_MSG_CHECKING([if Windows/CE build is requested])
+	AC_ARG_ENABLE(wince,
+	    AC_HELP_STRING([--enable-wince],
+		[enable Win/CE support (where applicable)]),
+	    [doWince=$enableval], [doWince=no])
+	AC_MSG_RESULT([$doWince])
+    ])
+
+    # Set the variable "system" to hold the name and version number
+    # for the system.
+
+    TEA_CONFIG_SYSTEM
+
+    # Require ranlib early so we can override it in special cases below.
+
+    AC_REQUIRE([AC_PROG_RANLIB])
+
+    # Set configuration options based on system name and version.
+    # This is similar to Tcl's unix/tcl.m4 except that we've added a
+    # "windows" case and removed some core-only vars.
+
+    do64bit_ok=no
+    # default to '{$LIBS}' and set to "" on per-platform necessary basis
+    SHLIB_LD_LIBS='${LIBS}'
+    # When ld needs options to work in 64-bit mode, put them in
+    # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load]
+    # is disabled by the user. [Bug 1016796]
+    LDFLAGS_ARCH=""
+    UNSHARED_LIB_SUFFIX=""
+    # TEA specific: use PACKAGE_VERSION instead of VERSION
+    TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`'
+    ECHO_VERSION='`echo ${PACKAGE_VERSION}`'
+    TCL_LIB_VERSIONS_OK=ok
+    CFLAGS_DEBUG=-g
+    AS_IF([test "$GCC" = yes], [
+	CFLAGS_OPTIMIZE=-O2
+	CFLAGS_WARNING="-Wall"
+    ], [
+	CFLAGS_OPTIMIZE=-O
+	CFLAGS_WARNING=""
+    ])
+    AC_CHECK_TOOL(AR, ar)
+    STLIB_LD='${AR} cr'
+    LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH"
+    AS_IF([test "x$SHLIB_VERSION" = x],[SHLIB_VERSION="1.0"])
+    case $system in
+	# TEA specific:
+	windows)
+	    # This is a 2-stage check to make sure we have the 64-bit SDK
+	    # We have to know where the SDK is installed.
+	    # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs
+	    # MACHINE is IX86 for LINK, but this is used by the manifest,
+	    # which requires x86|amd64|ia64.
+	    MACHINE="X86"
+	    if test "$do64bit" != "no" ; then
+		if test "x${MSSDK}x" = "xx" ; then
+		    MSSDK="C:/Progra~1/Microsoft Platform SDK"
+		fi
+		MSSDK=`echo "$MSSDK" | sed -e  's!\\\!/!g'`
+		PATH64=""
+		case "$do64bit" in
+		    amd64|x64|yes)
+			MACHINE="AMD64" ; # default to AMD64 64-bit build
+			PATH64="${MSSDK}/Bin/Win64/x86/AMD64"
+			;;
+		    ia64)
+			MACHINE="IA64"
+			PATH64="${MSSDK}/Bin/Win64"
+			;;
+		esac
+		if test "$GCC" != "yes" -a ! -d "${PATH64}" ; then
+		    AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode])
+		    AC_MSG_WARN([Ensure latest Platform SDK is installed])
+		    do64bit="no"
+		else
+		    AC_MSG_RESULT([   Using 64-bit $MACHINE mode])
+		    do64bit_ok="yes"
+		fi
+	    fi
+
+	    if test "$doWince" != "no" ; then
+		if test "$do64bit" != "no" ; then
+		    AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible])
+		fi
+		if test "$GCC" = "yes" ; then
+		    AC_MSG_ERROR([Windows/CE and GCC builds incompatible])
+		fi
+		TEA_PATH_CELIB
+		# Set defaults for common evc4/PPC2003 setup
+		# Currently Tcl requires 300+, possibly 420+ for sockets
+		CEVERSION=420; 		# could be 211 300 301 400 420 ...
+		TARGETCPU=ARMV4;	# could be ARMV4 ARM MIPS SH3 X86 ...
+		ARCH=ARM;		# could be ARM MIPS X86EM ...
+		PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002"
+		if test "$doWince" != "yes"; then
+		    # If !yes then the user specified something
+		    # Reset ARCH to allow user to skip specifying it
+		    ARCH=
+		    eval `echo $doWince | awk -F, '{ \
+	    if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \
+	    if ([$]1 < 400)   { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \
+	    if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \
+	    if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \
+	    if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \
+		    }'`
+		    if test "x${ARCH}" = "x" ; then
+			ARCH=$TARGETCPU;
+		    fi
+		fi
+		OSVERSION=WCE$CEVERSION;
+	    	if test "x${WCEROOT}" = "x" ; then
+			WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0"
+		    if test ! -d "${WCEROOT}" ; then
+			WCEROOT="C:/Program Files/Microsoft eMbedded Tools"
+		    fi
+		fi
+		if test "x${SDKROOT}" = "x" ; then
+		    SDKROOT="C:/Program Files/Windows CE Tools"
+		    if test ! -d "${SDKROOT}" ; then
+			SDKROOT="C:/Windows CE Tools"
+		    fi
+		fi
+		WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'`
+		SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'`
+		if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \
+		    -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then
+		    AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]])
+		    doWince="no"
+		else
+		    # We could PATH_NOSPACE these, but that's not important,
+		    # as long as we quote them when used.
+		    CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include"
+		    if test -d "${CEINCLUDE}/${TARGETCPU}" ; then
+			CEINCLUDE="${CEINCLUDE}/${TARGETCPU}"
+		    fi
+		    CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}"
+    		fi
+	    fi
+
+	    if test "$GCC" != "yes" ; then
+	        if test "${SHARED_BUILD}" = "0" ; then
+		    runtime=-MT
+	        else
+		    runtime=-MD
+	        fi
+
+                if test "$do64bit" != "no" ; then
+		    # All this magic is necessary for the Win64 SDK RC1 - hobbs
+		    CC="\"${PATH64}/cl.exe\""
+		    CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\""
+		    RC="\"${MSSDK}/bin/rc.exe\""
+		    lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\""
+		    LINKBIN="\"${PATH64}/link.exe\""
+		    CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d"
+		    CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}"
+		    # Avoid 'unresolved external symbol __security_cookie'
+		    # errors, c.f. http://support.microsoft.com/?id=894573
+		    TEA_ADD_LIBS([bufferoverflowU.lib])
+		elif test "$doWince" != "no" ; then
+		    CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin"
+		    if test "${TARGETCPU}" = "X86"; then
+			CC="\"${CEBINROOT}/cl.exe\""
+		    else
+			CC="\"${CEBINROOT}/cl${ARCH}.exe\""
+		    fi
+		    CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\""
+		    RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\""
+		    arch=`echo ${ARCH} | awk '{print tolower([$]0)}'`
+		    defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS"
+		    if test "${SHARED_BUILD}" = "1" ; then
+			# Static CE builds require static celib as well
+		    	defs="${defs} _DLL"
+		    fi
+		    for i in $defs ; do
+			AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i)
+		    done
+		    AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version])
+		    AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version])
+		    CFLAGS_DEBUG="-nologo -Zi -Od"
+		    CFLAGS_OPTIMIZE="-nologo -Ox"
+		    lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'`
+		    lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo"
+		    LINKBIN="\"${CEBINROOT}/link.exe\""
+		    AC_SUBST(CELIB_DIR)
+		else
+		    RC="rc"
+		    lflags="-nologo"
+		    LINKBIN="link"
+		    CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d"
+		    CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}"
+		fi
+	    fi
+
+	    if test "$GCC" = "yes"; then
+		# mingw gcc mode
+		AC_CHECK_TOOL(RC, windres)
+		CFLAGS_DEBUG="-g"
+		CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer"
+		SHLIB_LD='${CC} -shared'
+		UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
+		LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}"
+		LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}"
+
+		AC_CACHE_CHECK(for cross-compile version of gcc,
+			ac_cv_cross,
+			AC_TRY_COMPILE([
+			    #ifdef _WIN32
+				#error cross-compiler
+			    #endif
+			], [],
+			ac_cv_cross=yes,
+			ac_cv_cross=no)
+		      )
+		      if test "$ac_cv_cross" = "yes"; then
+			case "$do64bit" in
+			    amd64|x64|yes)
+				CC="x86_64-w64-mingw32-gcc"
+				LD="x86_64-w64-mingw32-ld"
+				AR="x86_64-w64-mingw32-ar"
+				RANLIB="x86_64-w64-mingw32-ranlib"
+				RC="x86_64-w64-mingw32-windres"
+			    ;;
+			    *)
+				CC="i686-w64-mingw32-gcc"
+				LD="i686-w64-mingw32-ld"
+				AR="i686-w64-mingw32-ar"
+				RANLIB="i686-w64-mingw32-ranlib"
+				RC="i686-w64-mingw32-windres"
+			    ;;
+			esac
+		fi
+
+	    else
+		SHLIB_LD="${LINKBIN} -dll ${lflags}"
+		# link -lib only works when -lib is the first arg
+		STLIB_LD="${LINKBIN} -lib ${lflags}"
+		UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib'
+		PATHTYPE=-w
+		# For information on what debugtype is most useful, see:
+		# http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp
+		# and also
+		# http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx
+		# This essentially turns it all on.
+		LDFLAGS_DEBUG="-debug -debugtype:cv"
+		LDFLAGS_OPTIMIZE="-release"
+		if test "$doWince" != "no" ; then
+		    LDFLAGS_CONSOLE="-link ${lflags}"
+		    LDFLAGS_WINDOW=${LDFLAGS_CONSOLE}
+		else
+		    LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}"
+		    LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}"
+		fi
+	    fi
+
+	    SHLIB_SUFFIX=".dll"
+	    SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll'
+
+	    TCL_LIB_VERSIONS_OK=nodots
+    	    ;;
+	AIX-*)
+	    AS_IF([test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"], [
+		# AIX requires the _r compiler when gcc isn't being used
+		case "${CC}" in
+		    *_r|*_r\ *)
+			# ok ...
+			;;
+		    *)
+			# Make sure only first arg gets _r
+		    	CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'`
+			;;
+		esac
+		AC_MSG_RESULT([Using $CC for compiling with threads])
+	    ])
+	    LIBS="$LIBS -lc"
+	    SHLIB_CFLAGS=""
+	    SHLIB_SUFFIX=".so"
+
+	    LD_LIBRARY_PATH_VAR="LIBPATH"
+
+	    # Check to enable 64-bit flags for compiler/linker
+	    AS_IF([test "$do64bit" = yes], [
+		AS_IF([test "$GCC" = yes], [
+		    AC_MSG_WARN([64bit mode not supported with GCC on $system])
+		], [
+		    do64bit_ok=yes
+		    CFLAGS="$CFLAGS -q64"
+		    LDFLAGS_ARCH="-q64"
+		    RANLIB="${RANLIB} -X64"
+		    AR="${AR} -X64"
+		    SHLIB_LD_FLAGS="-b64"
+		])
+	    ])
+
+	    AS_IF([test "`uname -m`" = ia64], [
+		# AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC
+		SHLIB_LD="/usr/ccs/bin/ld -G -z text"
+		AS_IF([test "$GCC" = yes], [
+		    CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
+		], [
+		    CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}'
+		])
+		LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
+	    ], [
+		AS_IF([test "$GCC" = yes], [
+		    SHLIB_LD='${CC} -shared -Wl,-bexpall'
+		], [
+		    SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry"
+		    LDFLAGS="$LDFLAGS -brtl"
+		])
+		SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}"
+		CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
+		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+	    ])
+	    ;;
+	BeOS*)
+	    SHLIB_CFLAGS="-fPIC"
+	    SHLIB_LD='${CC} -nostart'
+	    SHLIB_SUFFIX=".so"
+
+	    #-----------------------------------------------------------
+	    # Check for inet_ntoa in -lbind, for BeOS (which also needs
+	    # -lsocket, even if the network functions are in -lnet which
+	    # is always linked to, for compatibility.
+	    #-----------------------------------------------------------
+	    AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"])
+	    ;;
+	BSD/OS-4.*)
+	    SHLIB_CFLAGS="-export-dynamic -fPIC"
+	    SHLIB_LD='${CC} -shared'
+	    SHLIB_SUFFIX=".so"
+	    LDFLAGS="$LDFLAGS -export-dynamic"
+	    CC_SEARCH_FLAGS=""
+	    LD_SEARCH_FLAGS=""
+	    ;;
+	CYGWIN_*)
+	    SHLIB_CFLAGS=""
+	    SHLIB_LD='${CC} -shared'
+	    SHLIB_SUFFIX=".dll"
+	    EXEEXT=".exe"
+	    do64bit_ok=yes
+	    CC_SEARCH_FLAGS=""
+	    LD_SEARCH_FLAGS=""
+	    ;;
+	Haiku*)
+	    LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
+	    SHLIB_CFLAGS="-fPIC"
+	    SHLIB_SUFFIX=".so"
+	    SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}'
+	    AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"])
+	    ;;
+	HP-UX-*.11.*)
+	    # Use updated header definitions where possible
+	    AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?])
+	    # TEA specific: Needed by Tcl, but not most extensions
+	    #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?])
+	    #LIBS="$LIBS -lxnet"               # Use the XOPEN network library
+
+	    AS_IF([test "`uname -m`" = ia64], [
+		SHLIB_SUFFIX=".so"
+		# Use newer C++ library for C++ extensions
+		#if test "$GCC" != "yes" ; then
+		#   CPPFLAGS="-AA"
+		#fi
+	    ], [
+		SHLIB_SUFFIX=".sl"
+	    ])
+	    AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)
+	    AS_IF([test "$tcl_ok" = yes], [
+		LDFLAGS="$LDFLAGS -Wl,-E"
+		CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.'
+		LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.'
+		LD_LIBRARY_PATH_VAR="SHLIB_PATH"
+	    ])
+	    AS_IF([test "$GCC" = yes], [
+		SHLIB_LD='${CC} -shared'
+		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+	    ], [
+		CFLAGS="$CFLAGS -z"
+		# Users may want PA-RISC 1.1/2.0 portable code - needs HP cc
+		#CFLAGS="$CFLAGS +DAportable"
+		SHLIB_CFLAGS="+z"
+		SHLIB_LD="ld -b"
+	    ])
+
+	    # Check to enable 64-bit flags for compiler/linker
+	    AS_IF([test "$do64bit" = "yes"], [
+		AS_IF([test "$GCC" = yes], [
+		    case `${CC} -dumpmachine` in
+			hppa64*)
+			    # 64-bit gcc in use.  Fix flags for GNU ld.
+			    do64bit_ok=yes
+			    SHLIB_LD='${CC} -shared'
+			    AS_IF([test $doRpath = yes], [
+				CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
+			    LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+			    ;;
+			*)
+			    AC_MSG_WARN([64bit mode not supported with GCC on $system])
+			    ;;
+		    esac
+		], [
+		    do64bit_ok=yes
+		    CFLAGS="$CFLAGS +DD64"
+		    LDFLAGS_ARCH="+DD64"
+		])
+	    ]) ;;
+	IRIX-6.*)
+	    SHLIB_CFLAGS=""
+	    SHLIB_LD="ld -n32 -shared -rdata_shared"
+	    SHLIB_SUFFIX=".so"
+	    AS_IF([test $doRpath = yes], [
+		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
+		LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
+	    AS_IF([test "$GCC" = yes], [
+		CFLAGS="$CFLAGS -mabi=n32"
+		LDFLAGS="$LDFLAGS -mabi=n32"
+	    ], [
+		case $system in
+		    IRIX-6.3)
+			# Use to build 6.2 compatible binaries on 6.3.
+			CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS"
+			;;
+		    *)
+			CFLAGS="$CFLAGS -n32"
+			;;
+		esac
+		LDFLAGS="$LDFLAGS -n32"
+	    ])
+	    ;;
+	IRIX64-6.*)
+	    SHLIB_CFLAGS=""
+	    SHLIB_LD="ld -n32 -shared -rdata_shared"
+	    SHLIB_SUFFIX=".so"
+	    AS_IF([test $doRpath = yes], [
+		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
+		LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
+
+	    # Check to enable 64-bit flags for compiler/linker
+
+	    AS_IF([test "$do64bit" = yes], [
+	        AS_IF([test "$GCC" = yes], [
+	            AC_MSG_WARN([64bit mode not supported by gcc])
+	        ], [
+	            do64bit_ok=yes
+	            SHLIB_LD="ld -64 -shared -rdata_shared"
+	            CFLAGS="$CFLAGS -64"
+	            LDFLAGS_ARCH="-64"
+	        ])
+	    ])
+	    ;;
+	Linux*|GNU*|NetBSD-Debian)
+	    SHLIB_CFLAGS="-fPIC"
+	    SHLIB_SUFFIX=".so"
+
+	    # TEA specific:
+	    CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer"
+
+	    # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
+	    SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}'
+	    LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
+	    AS_IF([test $doRpath = yes], [
+		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
+	    LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+	    AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"])
+	    AS_IF([test $do64bit = yes], [
+		AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [
+		    hold_cflags=$CFLAGS
+		    CFLAGS="$CFLAGS -m64"
+		    AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no)
+		    CFLAGS=$hold_cflags])
+		AS_IF([test $tcl_cv_cc_m64 = yes], [
+		    CFLAGS="$CFLAGS -m64"
+		    do64bit_ok=yes
+		])
+	   ])
+
+	    # The combo of gcc + glibc has a bug related to inlining of
+	    # functions like strtod(). The -fno-builtin flag should address
+	    # this problem but it does not work. The -fno-inline flag is kind
+	    # of overkill but it works. Disable inlining only when one of the
+	    # files in compat/*.c is being linked in.
+
+	    AS_IF([test x"${USE_COMPAT}" != x],[CFLAGS="$CFLAGS -fno-inline"])
+	    ;;
+	Lynx*)
+	    SHLIB_CFLAGS="-fPIC"
+	    SHLIB_SUFFIX=".so"
+	    CFLAGS_OPTIMIZE=-02
+	    SHLIB_LD='${CC} -shared'
+	    LD_FLAGS="-Wl,--export-dynamic"
+	    AS_IF([test $doRpath = yes], [
+		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
+		LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
+	    ;;
+	OpenBSD-*)
+	    arch=`arch -s`
+	    case "$arch" in
+	    vax)
+		SHLIB_SUFFIX=""
+		SHARED_LIB_SUFFIX=""
+		LDFLAGS=""
+		;;
+	    *)
+		SHLIB_CFLAGS="-fPIC"
+		SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}'
+		SHLIB_SUFFIX=".so"
+		AS_IF([test $doRpath = yes], [
+		    CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
+		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+		SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.${SHLIB_VERSION}'
+		LDFLAGS="-Wl,-export-dynamic"
+		;;
+	    esac
+	    case "$arch" in
+	    vax)
+		CFLAGS_OPTIMIZE="-O1"
+		;;
+	    *)
+		CFLAGS_OPTIMIZE="-O2"
+		;;
+	    esac
+	    AS_IF([test "${TCL_THREADS}" = "1"], [
+		# On OpenBSD:	Compile with -pthread
+		#		Don't link with -lpthread
+		LIBS=`echo $LIBS | sed s/-lpthread//`
+		CFLAGS="$CFLAGS -pthread"
+	    ])
+	    # OpenBSD doesn't do version numbers with dots.
+	    UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
+	    TCL_LIB_VERSIONS_OK=nodots
+	    ;;
+	NetBSD-*)
+	    # NetBSD has ELF and can use 'cc -shared' to build shared libs
+	    SHLIB_CFLAGS="-fPIC"
+	    SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}'
+	    SHLIB_SUFFIX=".so"
+	    LDFLAGS="$LDFLAGS -export-dynamic"
+	    AS_IF([test $doRpath = yes], [
+		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
+	    LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+	    AS_IF([test "${TCL_THREADS}" = "1"], [
+		# The -pthread needs to go in the CFLAGS, not LIBS
+		LIBS=`echo $LIBS | sed s/-pthread//`
+		CFLAGS="$CFLAGS -pthread"
+	    	LDFLAGS="$LDFLAGS -pthread"
+	    ])
+	    ;;
+	FreeBSD-*)
+	    # This configuration from FreeBSD Ports.
+	    SHLIB_CFLAGS="-fPIC"
+	    SHLIB_LD="${CC} -shared"
+	    TCL_SHLIB_LD_EXTRAS="-Wl,-soname=\$[@]"
+	    SHLIB_SUFFIX=".so"
+	    LDFLAGS=""
+	    AS_IF([test $doRpath = yes], [
+		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
+		LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
+	    AS_IF([test "${TCL_THREADS}" = "1"], [
+		# The -pthread needs to go in the LDFLAGS, not LIBS
+		LIBS=`echo $LIBS | sed s/-pthread//`
+		CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+		LDFLAGS="$LDFLAGS $PTHREAD_LIBS"])
+	    # Version numbers are dot-stripped by system policy.
+	    TCL_TRIM_DOTS=`echo ${PACKAGE_VERSION} | tr -d .`
+	    UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
+	    SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1'
+	    TCL_LIB_VERSIONS_OK=nodots
+	    ;;
+	Darwin-*)
+	    CFLAGS_OPTIMIZE="-Os"
+	    SHLIB_CFLAGS="-fno-common"
+	    # To avoid discrepancies between what headers configure sees during
+	    # preprocessing tests and compiling tests, move any -isysroot and
+	    # -mmacosx-version-min flags from CFLAGS to CPPFLAGS:
+	    CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \
+		awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \
+		if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`"
+	    CFLAGS="`echo " ${CFLAGS}" | \
+		awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \
+		if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`"
+	    AS_IF([test $do64bit = yes], [
+		case `arch` in
+		    ppc)
+			AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag],
+				tcl_cv_cc_arch_ppc64, [
+			    hold_cflags=$CFLAGS
+			    CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5"
+			    AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes,
+				    tcl_cv_cc_arch_ppc64=no)
+			    CFLAGS=$hold_cflags])
+			AS_IF([test $tcl_cv_cc_arch_ppc64 = yes], [
+			    CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5"
+			    do64bit_ok=yes
+			]);;
+		    i386)
+			AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag],
+				tcl_cv_cc_arch_x86_64, [
+			    hold_cflags=$CFLAGS
+			    CFLAGS="$CFLAGS -arch x86_64"
+			    AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes,
+				    tcl_cv_cc_arch_x86_64=no)
+			    CFLAGS=$hold_cflags])
+			AS_IF([test $tcl_cv_cc_arch_x86_64 = yes], [
+			    CFLAGS="$CFLAGS -arch x86_64"
+			    do64bit_ok=yes
+			]);;
+		    *)
+			AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);;
+		esac
+	    ], [
+		# Check for combined 32-bit and 64-bit fat build
+		AS_IF([echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \
+		    && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '], [
+		    fat_32_64=yes])
+	    ])
+	    # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
+	    SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}'
+	    AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [
+		hold_ldflags=$LDFLAGS
+		LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module"
+		AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no)
+		LDFLAGS=$hold_ldflags])
+	    AS_IF([test $tcl_cv_ld_single_module = yes], [
+		SHLIB_LD="${SHLIB_LD} -Wl,-single_module"
+	    ])
+	    # TEA specific: link shlib with current and compatibility version flags
+	    vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([[0-9]]\{1,5\}\)\(\(\.[[0-9]]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d`
+	    SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}"
+	    SHLIB_SUFFIX=".dylib"
+	    # Don't use -prebind when building for Mac OS X 10.4 or later only:
+	    AS_IF([test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \
+		"`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4], [
+		LDFLAGS="$LDFLAGS -prebind"])
+	    LDFLAGS="$LDFLAGS -headerpad_max_install_names"
+	    AC_CACHE_CHECK([if ld accepts -search_paths_first flag],
+		    tcl_cv_ld_search_paths_first, [
+		hold_ldflags=$LDFLAGS
+		LDFLAGS="$LDFLAGS -Wl,-search_paths_first"
+		AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes,
+			tcl_cv_ld_search_paths_first=no)
+		LDFLAGS=$hold_ldflags])
+	    AS_IF([test $tcl_cv_ld_search_paths_first = yes], [
+		LDFLAGS="$LDFLAGS -Wl,-search_paths_first"
+	    ])
+	    AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [
+		AC_DEFINE(MODULE_SCOPE, [__private_extern__],
+		    [Compiler support for module scope symbols])
+		tcl_cv_cc_visibility_hidden=yes
+	    ])
+	    CC_SEARCH_FLAGS=""
+	    LD_SEARCH_FLAGS=""
+	    LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH"
+	    # TEA specific: for combined 32 & 64 bit fat builds of Tk
+	    # extensions, verify that 64-bit build is possible.
+	    AS_IF([test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"], [
+		AS_IF([test "${TEA_WINDOWINGSYSTEM}" = x11], [
+		    AC_CACHE_CHECK([for 64-bit X11], tcl_cv_lib_x11_64, [
+			for v in CFLAGS CPPFLAGS LDFLAGS; do
+			    eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"'
+			done
+			CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include"
+			LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11"
+			AC_TRY_LINK([#include <X11/Xlib.h>], [XrmInitialize();],
+			    tcl_cv_lib_x11_64=yes, tcl_cv_lib_x11_64=no)
+			for v in CFLAGS CPPFLAGS LDFLAGS; do
+			    eval $v'="$hold_'$v'"'
+			done])
+		])
+		AS_IF([test "${TEA_WINDOWINGSYSTEM}" = aqua], [
+		    AC_CACHE_CHECK([for 64-bit Tk], tcl_cv_lib_tk_64, [
+			for v in CFLAGS CPPFLAGS LDFLAGS; do
+			    eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"'
+			done
+			CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}"
+			LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}"
+			AC_TRY_LINK([#include <tk.h>], [Tk_InitStubs(NULL, "", 0);],
+			    tcl_cv_lib_tk_64=yes, tcl_cv_lib_tk_64=no)
+			for v in CFLAGS CPPFLAGS LDFLAGS; do
+			    eval $v'="$hold_'$v'"'
+			done])
+		])
+		# remove 64-bit arch flags from CFLAGS et al. if configuration
+		# does not support 64-bit.
+		AS_IF([test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no], [
+		    AC_MSG_NOTICE([Removing 64-bit architectures from compiler & linker flags])
+		    for v in CFLAGS CPPFLAGS LDFLAGS; do
+			eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"'
+		    done])
+	    ])
+	    ;;
+	OS/390-*)
+	    CFLAGS_OPTIMIZE=""		# Optimizer is buggy
+	    AC_DEFINE(_OE_SOCKETS, 1,	# needed in sys/socket.h
+		[Should OS/390 do the right thing with sockets?])
+	    ;;
+	OSF1-V*)
+	    # Digital OSF/1
+	    SHLIB_CFLAGS=""
+	    AS_IF([test "$SHARED_BUILD" = 1], [
+	        SHLIB_LD='ld -shared -expect_unresolved "*"'
+	    ], [
+	        SHLIB_LD='ld -non_shared -expect_unresolved "*"'
+	    ])
+	    SHLIB_SUFFIX=".so"
+	    AS_IF([test $doRpath = yes], [
+		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
+		LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
+	    AS_IF([test "$GCC" = yes], [CFLAGS="$CFLAGS -mieee"], [
+		CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"])
+	    # see pthread_intro(3) for pthread support on osf1, k.furukawa
+	    AS_IF([test "${TCL_THREADS}" = 1], [
+		CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE"
+		CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64"
+		LIBS=`echo $LIBS | sed s/-lpthreads//`
+		AS_IF([test "$GCC" = yes], [
+		    LIBS="$LIBS -lpthread -lmach -lexc"
+		], [
+		    CFLAGS="$CFLAGS -pthread"
+		    LDFLAGS="$LDFLAGS -pthread"
+		])
+	    ])
+	    ;;
+	QNX-6*)
+	    # QNX RTP
+	    # This may work for all QNX, but it was only reported for v6.
+	    SHLIB_CFLAGS="-fPIC"
+	    SHLIB_LD="ld -Bshareable -x"
+	    SHLIB_LD_LIBS=""
+	    SHLIB_SUFFIX=".so"
+	    CC_SEARCH_FLAGS=""
+	    LD_SEARCH_FLAGS=""
+	    ;;
+	SCO_SV-3.2*)
+	    AS_IF([test "$GCC" = yes], [
+		SHLIB_CFLAGS="-fPIC -melf"
+		LDFLAGS="$LDFLAGS -melf -Wl,-Bexport"
+	    ], [
+	       SHLIB_CFLAGS="-Kpic -belf"
+	       LDFLAGS="$LDFLAGS -belf -Wl,-Bexport"
+	    ])
+	    SHLIB_LD="ld -G"
+	    SHLIB_LD_LIBS=""
+	    SHLIB_SUFFIX=".so"
+	    CC_SEARCH_FLAGS=""
+	    LD_SEARCH_FLAGS=""
+	    ;;
+	SunOS-5.[[0-6]])
+	    # Careful to not let 5.10+ fall into this case
+
+	    # Note: If _REENTRANT isn't defined, then Solaris
+	    # won't define thread-safe library routines.
+
+	    AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
+	    AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
+		[Do we really want to follow the standard? Yes we do!])
+
+	    SHLIB_CFLAGS="-KPIC"
+	    SHLIB_SUFFIX=".so"
+	    AS_IF([test "$GCC" = yes], [
+		SHLIB_LD='${CC} -shared'
+		CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
+		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+	    ], [
+		SHLIB_LD="/usr/ccs/bin/ld -G -z text"
+		CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
+		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+	    ])
+	    ;;
+	SunOS-5*)
+	    # Note: If _REENTRANT isn't defined, then Solaris
+	    # won't define thread-safe library routines.
+
+	    AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
+	    AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
+		[Do we really want to follow the standard? Yes we do!])
+
+	    SHLIB_CFLAGS="-KPIC"
+
+	    # Check to enable 64-bit flags for compiler/linker
+	    AS_IF([test "$do64bit" = yes], [
+		arch=`isainfo`
+		AS_IF([test "$arch" = "sparcv9 sparc"], [
+		    AS_IF([test "$GCC" = yes], [
+			AS_IF([test "`${CC} -dumpversion | awk -F. '{print [$]1}'`" -lt 3], [
+			    AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system])
+			], [
+			    do64bit_ok=yes
+			    CFLAGS="$CFLAGS -m64 -mcpu=v9"
+			    LDFLAGS="$LDFLAGS -m64 -mcpu=v9"
+			    SHLIB_CFLAGS="-fPIC"
+			])
+		    ], [
+			do64bit_ok=yes
+			AS_IF([test "$do64bitVIS" = yes], [
+			    CFLAGS="$CFLAGS -xarch=v9a"
+			    LDFLAGS_ARCH="-xarch=v9a"
+			], [
+			    CFLAGS="$CFLAGS -xarch=v9"
+			    LDFLAGS_ARCH="-xarch=v9"
+			])
+			# Solaris 64 uses this as well
+			#LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64"
+		    ])
+		], [AS_IF([test "$arch" = "amd64 i386"], [
+		    AS_IF([test "$GCC" = yes], [
+			case $system in
+			    SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*)
+				do64bit_ok=yes
+				CFLAGS="$CFLAGS -m64"
+				LDFLAGS="$LDFLAGS -m64";;
+			    *)
+				AC_MSG_WARN([64bit mode not supported with GCC on $system]);;
+			esac
+		    ], [
+			do64bit_ok=yes
+			case $system in
+			    SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*)
+				CFLAGS="$CFLAGS -m64"
+				LDFLAGS="$LDFLAGS -m64";;
+			    *)
+				CFLAGS="$CFLAGS -xarch=amd64"
+				LDFLAGS="$LDFLAGS -xarch=amd64";;
+			esac
+		    ])
+		], [AC_MSG_WARN([64bit mode not supported for $arch])])])
+	    ])
+
+	    SHLIB_SUFFIX=".so"
+	    AS_IF([test "$GCC" = yes], [
+		SHLIB_LD='${CC} -shared'
+		CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
+		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+		AS_IF([test "$do64bit_ok" = yes], [
+		    AS_IF([test "$arch" = "sparcv9 sparc"], [
+			# We need to specify -static-libgcc or we need to
+			# add the path to the sparv9 libgcc.
+			# JH: static-libgcc is necessary for core Tcl, but may
+			# not be necessary for extensions.
+			SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc"
+			# for finding sparcv9 libgcc, get the regular libgcc
+			# path, remove so name and append 'sparcv9'
+			#v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..."
+			#CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir"
+		    ], [AS_IF([test "$arch" = "amd64 i386"], [
+			# JH: static-libgcc is necessary for core Tcl, but may
+			# not be necessary for extensions.
+			SHLIB_LD="$SHLIB_LD -m64 -static-libgcc"
+		    ])])
+		])
+	    ], [
+		case $system in
+		    SunOS-5.[[1-9]][[0-9]]*)
+			# TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
+			SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';;
+		    *)
+			SHLIB_LD='/usr/ccs/bin/ld -G -z text';;
+		esac
+		CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
+		LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
+	    ])
+	    ;;
+	UNIX_SV* | UnixWare-5*)
+	    SHLIB_CFLAGS="-KPIC"
+	    SHLIB_LD='${CC} -G'
+	    SHLIB_LD_LIBS=""
+	    SHLIB_SUFFIX=".so"
+	    # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers
+	    # that don't grok the -Bexport option.  Test that it does.
+	    AC_CACHE_CHECK([for ld accepts -Bexport flag], tcl_cv_ld_Bexport, [
+		hold_ldflags=$LDFLAGS
+		LDFLAGS="$LDFLAGS -Wl,-Bexport"
+		AC_TRY_LINK(, [int i;], tcl_cv_ld_Bexport=yes, tcl_cv_ld_Bexport=no)
+	        LDFLAGS=$hold_ldflags])
+	    AS_IF([test $tcl_cv_ld_Bexport = yes], [
+		LDFLAGS="$LDFLAGS -Wl,-Bexport"
+	    ])
+	    CC_SEARCH_FLAGS=""
+	    LD_SEARCH_FLAGS=""
+	    ;;
+    esac
+
+    AS_IF([test "$do64bit" = yes -a "$do64bit_ok" = no], [
+	AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform])
+    ])
+
+dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so
+dnl # until the end of configure, as configure's compile and link tests use
+dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's
+dnl # preprocessing tests use only CPPFLAGS.
+    AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""])
+
+    # Add in the arch flags late to ensure it wasn't removed.
+    # Not necessary in TEA, but this is aligned with core
+    LDFLAGS="$LDFLAGS $LDFLAGS_ARCH"
+
+    # If we're running gcc, then change the C flags for compiling shared
+    # libraries to the right flags for gcc, instead of those for the
+    # standard manufacturer compiler.
+
+    AS_IF([test "$GCC" = yes], [
+	case $system in
+	    AIX-*) ;;
+	    BSD/OS*) ;;
+	    CYGWIN_*|MINGW32_*) ;;
+	    IRIX*) ;;
+	    NetBSD-*|FreeBSD-*|OpenBSD-*) ;;
+	    Darwin-*) ;;
+	    SCO_SV-3.2*) ;;
+	    windows) ;;
+	    *) SHLIB_CFLAGS="-fPIC" ;;
+	esac])
+
+    AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [
+	AC_DEFINE(MODULE_SCOPE, [extern],
+	    [No Compiler support for module scope symbols])
+    ])
+
+    AS_IF([test "$SHARED_LIB_SUFFIX" = ""], [
+    # TEA specific: use PACKAGE_VERSION instead of VERSION
+    SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}'])
+    AS_IF([test "$UNSHARED_LIB_SUFFIX" = ""], [
+    # TEA specific: use PACKAGE_VERSION instead of VERSION
+    UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a'])
+
+    if test "${GCC}" = "yes" -a ${SHLIB_SUFFIX} = ".dll"; then
+	AC_CACHE_CHECK(for SEH support in compiler,
+	    tcl_cv_seh,
+	AC_TRY_RUN([
+#define WIN32_LEAN_AND_MEAN
+#include <windows.h>
+#undef WIN32_LEAN_AND_MEAN
+
+	    int main(int argc, char** argv) {
+		int a, b = 0;
+		__try {
+		    a = 666 / b;
+		}
+		__except (EXCEPTION_EXECUTE_HANDLER) {
+		    return 0;
+		}
+		return 1;
+	    }
+	],
+	    tcl_cv_seh=yes,
+	    tcl_cv_seh=no,
+	    tcl_cv_seh=no)
+	)
+	if test "$tcl_cv_seh" = "no" ; then
+	    AC_DEFINE(HAVE_NO_SEH, 1,
+		    [Defined when mingw does not support SEH])
+	fi
+
+	#
+	# Check to see if the excpt.h include file provided contains the
+	# definition for EXCEPTION_DISPOSITION; if not, which is the case
+	# with Cygwin's version as of 2002-04-10, define it to be int,
+	# sufficient for getting the current code to work.
+	#
+	AC_CACHE_CHECK(for EXCEPTION_DISPOSITION support in include files,
+	    tcl_cv_eh_disposition,
+	    AC_TRY_COMPILE([
+#	    define WIN32_LEAN_AND_MEAN
+#	    include <windows.h>
+#	    undef WIN32_LEAN_AND_MEAN
+	    ],[
+		EXCEPTION_DISPOSITION x;
+	    ],
+		tcl_cv_eh_disposition=yes,
+		tcl_cv_eh_disposition=no)
+	)
+	if test "$tcl_cv_eh_disposition" = "no" ; then
+	AC_DEFINE(EXCEPTION_DISPOSITION, int,
+		[Defined when cygwin/mingw does not support EXCEPTION DISPOSITION])
+	fi
+
+	# Check to see if winnt.h defines CHAR, SHORT, and LONG
+	# even if VOID has already been #defined. The win32api
+	# used by mingw and cygwin is known to do this.
+
+	AC_CACHE_CHECK(for winnt.h that ignores VOID define,
+	    tcl_cv_winnt_ignore_void,
+	    AC_TRY_COMPILE([
+#define VOID void
+#define WIN32_LEAN_AND_MEAN
+#include <windows.h>
+#undef WIN32_LEAN_AND_MEAN
+	    ], [
+		CHAR c;
+		SHORT s;
+		LONG l;
+	    ],
+        tcl_cv_winnt_ignore_void=yes,
+        tcl_cv_winnt_ignore_void=no)
+	)
+	if test "$tcl_cv_winnt_ignore_void" = "yes" ; then
+	    AC_DEFINE(HAVE_WINNT_IGNORE_VOID, 1,
+		    [Defined when cygwin/mingw ignores VOID define in winnt.h])
+	fi
+    fi
+
+	# See if the compiler supports casting to a union type.
+	# This is used to stop gcc from printing a compiler
+	# warning when initializing a union member.
+
+	AC_CACHE_CHECK(for cast to union support,
+	    tcl_cv_cast_to_union,
+	    AC_TRY_COMPILE([],
+	    [
+		  union foo { int i; double d; };
+		  union foo f = (union foo) (int) 0;
+	    ],
+	    tcl_cv_cast_to_union=yes,
+	    tcl_cv_cast_to_union=no)
+	)
+	if test "$tcl_cv_cast_to_union" = "yes"; then
+	    AC_DEFINE(HAVE_CAST_TO_UNION, 1,
+		    [Defined when compiler supports casting to union type.])
+	fi
+
+    AC_SUBST(CFLAGS_DEBUG)
+    AC_SUBST(CFLAGS_OPTIMIZE)
+    AC_SUBST(CFLAGS_WARNING)
+
+    AC_SUBST(STLIB_LD)
+    AC_SUBST(SHLIB_LD)
+
+    AC_SUBST(SHLIB_LD_LIBS)
+    AC_SUBST(SHLIB_CFLAGS)
+
+    AC_SUBST(LD_LIBRARY_PATH_VAR)
+
+    # These must be called after we do the basic CFLAGS checks and
+    # verify any possible 64-bit or similar switches are necessary
+    TEA_TCL_EARLY_FLAGS
+    TEA_TCL_64BIT_FLAGS
+])
+
+#--------------------------------------------------------------------
+# TEA_SERIAL_PORT
+#
+#	Determine which interface to use to talk to the serial port.
+#	Note that #include lines must begin in leftmost column for
+#	some compilers to recognize them as preprocessor directives,
+#	and some build environments have stdin not pointing at a
+#	pseudo-terminal (usually /dev/null instead.)
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Defines only one of the following vars:
+#		HAVE_SYS_MODEM_H
+#		USE_TERMIOS
+#		USE_TERMIO
+#		USE_SGTTY
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_SERIAL_PORT], [
+    AC_CHECK_HEADERS(sys/modem.h)
+    AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [
+    AC_TRY_RUN([
+#include <termios.h>
+
+int main() {
+    struct termios t;
+    if (tcgetattr(0, &t) == 0) {
+	cfsetospeed(&t, 0);
+	t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
+	return 0;
+    }
+    return 1;
+}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
+    if test $tcl_cv_api_serial = no ; then
+	AC_TRY_RUN([
+#include <termio.h>
+
+int main() {
+    struct termio t;
+    if (ioctl(0, TCGETA, &t) == 0) {
+	t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
+	return 0;
+    }
+    return 1;
+}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
+    fi
+    if test $tcl_cv_api_serial = no ; then
+	AC_TRY_RUN([
+#include <sgtty.h>
+
+int main() {
+    struct sgttyb t;
+    if (ioctl(0, TIOCGETP, &t) == 0) {
+	t.sg_ospeed = 0;
+	t.sg_flags |= ODDP | EVENP | RAW;
+	return 0;
+    }
+    return 1;
+}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
+    fi
+    if test $tcl_cv_api_serial = no ; then
+	AC_TRY_RUN([
+#include <termios.h>
+#include <errno.h>
+
+int main() {
+    struct termios t;
+    if (tcgetattr(0, &t) == 0
+	|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
+	cfsetospeed(&t, 0);
+	t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
+	return 0;
+    }
+    return 1;
+}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
+    fi
+    if test $tcl_cv_api_serial = no; then
+	AC_TRY_RUN([
+#include <termio.h>
+#include <errno.h>
+
+int main() {
+    struct termio t;
+    if (ioctl(0, TCGETA, &t) == 0
+	|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
+	t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
+	return 0;
+    }
+    return 1;
+    }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
+    fi
+    if test $tcl_cv_api_serial = no; then
+	AC_TRY_RUN([
+#include <sgtty.h>
+#include <errno.h>
+
+int main() {
+    struct sgttyb t;
+    if (ioctl(0, TIOCGETP, &t) == 0
+	|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
+	t.sg_ospeed = 0;
+	t.sg_flags |= ODDP | EVENP | RAW;
+	return 0;
+    }
+    return 1;
+}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none)
+    fi])
+    case $tcl_cv_api_serial in
+	termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);;
+	termio)  AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);;
+	sgtty)   AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);;
+    esac
+])
+
+#--------------------------------------------------------------------
+# TEA_MISSING_POSIX_HEADERS
+#
+#	Supply substitutes for missing POSIX header files.  Special
+#	notes:
+#	    - stdlib.h doesn't define strtol, strtoul, or
+#	      strtod in some versions of SunOS
+#	    - some versions of string.h don't declare procedures such
+#	      as strstr
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Defines some of the following vars:
+#		NO_DIRENT_H
+#		NO_ERRNO_H
+#		NO_VALUES_H
+#		HAVE_LIMITS_H or NO_LIMITS_H
+#		NO_STDLIB_H
+#		NO_STRING_H
+#		NO_SYS_WAIT_H
+#		NO_DLFCN_H
+#		HAVE_SYS_PARAM_H
+#
+#		HAVE_STRING_H ?
+#
+# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and
+# CHECK on limits.h
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_MISSING_POSIX_HEADERS], [
+    AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, [
+    AC_TRY_LINK([#include <sys/types.h>
+#include <dirent.h>], [
+#ifndef _POSIX_SOURCE
+#   ifdef __Lynx__
+	/*
+	 * Generate compilation error to make the test fail:  Lynx headers
+	 * are only valid if really in the POSIX environment.
+	 */
+
+	missing_procedure();
+#   endif
+#endif
+DIR *d;
+struct dirent *entryPtr;
+char *p;
+d = opendir("foobar");
+entryPtr = readdir(d);
+p = entryPtr->d_name;
+closedir(d);
+], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)])
+
+    if test $tcl_cv_dirent_h = no; then
+	AC_DEFINE(NO_DIRENT_H, 1, [Do we have <dirent.h>?])
+    fi
+
+    # TEA specific:
+    AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have <errno.h>?])])
+    AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have <float.h>?])])
+    AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have <values.h>?])])
+    AC_CHECK_HEADER(limits.h,
+	[AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have <limits.h>?])],
+	[AC_DEFINE(NO_LIMITS_H, 1, [Do we have <limits.h>?])])
+    AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0)
+    AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0)
+    AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0)
+    AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0)
+    if test $tcl_ok = 0; then
+	AC_DEFINE(NO_STDLIB_H, 1, [Do we have <stdlib.h>?])
+    fi
+    AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0)
+    AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0)
+    AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0)
+
+    # See also memmove check below for a place where NO_STRING_H can be
+    # set and why.
+
+    if test $tcl_ok = 0; then
+	AC_DEFINE(NO_STRING_H, 1, [Do we have <string.h>?])
+    fi
+
+    AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have <sys/wait.h>?])])
+    AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have <dlfcn.h>?])])
+
+    # OS/390 lacks sys/param.h (and doesn't need it, by chance).
+    AC_HAVE_HEADERS(sys/param.h)
+])
+
+#--------------------------------------------------------------------
+# TEA_PATH_X
+#
+#	Locate the X11 header files and the X11 library archive.  Try
+#	the ac_path_x macro first, but if it doesn't find the X stuff
+#	(e.g. because there's no xmkmf program) then check through
+#	a list of possible directories.  Under some conditions the
+#	autoconf macro will return an include directory that contains
+#	no include files, so double-check its result just to be safe.
+#
+#	This should be called after TEA_CONFIG_CFLAGS as setting the
+#	LIBS line can confuse some configure macro magic.
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Sets the following vars:
+#		XINCLUDES
+#		XLIBSW
+#		PKG_LIBS (appends to)
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_PATH_X], [
+    if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then
+	TEA_PATH_UNIX_X
+    fi
+])
+
+AC_DEFUN([TEA_PATH_UNIX_X], [
+    AC_PATH_X
+    not_really_there=""
+    if test "$no_x" = ""; then
+	if test "$x_includes" = ""; then
+	    AC_TRY_CPP([#include <X11/Xlib.h>], , not_really_there="yes")
+	else
+	    if test ! -r $x_includes/X11/Xlib.h; then
+		not_really_there="yes"
+	    fi
+	fi
+    fi
+    if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
+	AC_MSG_CHECKING([for X11 header files])
+	found_xincludes="no"
+	AC_TRY_CPP([#include <X11/Xlib.h>], found_xincludes="yes", found_xincludes="no")
+	if test "$found_xincludes" = "no"; then
+	    dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
+	    for i in $dirs ; do
+		if test -r $i/X11/Xlib.h; then
+		    AC_MSG_RESULT([$i])
+		    XINCLUDES=" -I$i"
+		    found_xincludes="yes"
+		    break
+		fi
+	    done
+	fi
+    else
+	if test "$x_includes" != ""; then
+	    XINCLUDES="-I$x_includes"
+	    found_xincludes="yes"
+	fi
+    fi
+    if test "$found_xincludes" = "no"; then
+	AC_MSG_RESULT([couldn't find any!])
+    fi
+
+    if test "$no_x" = yes; then
+	AC_MSG_CHECKING([for X11 libraries])
+	XLIBSW=nope
+	dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
+	for i in $dirs ; do
+	    if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then
+		AC_MSG_RESULT([$i])
+		XLIBSW="-L$i -lX11"
+		x_libraries="$i"
+		break
+	    fi
+	done
+    else
+	if test "$x_libraries" = ""; then
+	    XLIBSW=-lX11
+	else
+	    XLIBSW="-L$x_libraries -lX11"
+	fi
+    fi
+    if test "$XLIBSW" = nope ; then
+	AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow)
+    fi
+    if test "$XLIBSW" = nope ; then
+	AC_MSG_RESULT([could not find any!  Using -lX11.])
+	XLIBSW=-lX11
+    fi
+    # TEA specific:
+    if test x"${XLIBSW}" != x ; then
+	PKG_LIBS="${PKG_LIBS} ${XLIBSW}"
+    fi
+])
+
+#--------------------------------------------------------------------
+# TEA_BLOCKING_STYLE
+#
+#	The statements below check for systems where POSIX-style
+#	non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented.
+#	On these systems (mostly older ones), use the old BSD-style
+#	FIONBIO approach instead.
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Defines some of the following vars:
+#		HAVE_SYS_IOCTL_H
+#		HAVE_SYS_FILIO_H
+#		USE_FIONBIO
+#		O_NONBLOCK
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_BLOCKING_STYLE], [
+    AC_CHECK_HEADERS(sys/ioctl.h)
+    AC_CHECK_HEADERS(sys/filio.h)
+    TEA_CONFIG_SYSTEM
+    AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O])
+    case $system in
+	OSF*)
+	    AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?])
+	    AC_MSG_RESULT([FIONBIO])
+	    ;;
+	*)
+	    AC_MSG_RESULT([O_NONBLOCK])
+	    ;;
+    esac
+])
+
+#--------------------------------------------------------------------
+# TEA_TIME_HANDLER
+#
+#	Checks how the system deals with time.h, what time structures
+#	are used on the system, and what fields the structures have.
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Defines some of the following vars:
+#		USE_DELTA_FOR_TZ
+#		HAVE_TM_GMTOFF
+#		HAVE_TM_TZADJ
+#		HAVE_TIMEZONE_VAR
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_TIME_HANDLER], [
+    AC_CHECK_HEADERS(sys/time.h)
+    AC_HEADER_TIME
+    AC_STRUCT_TIMEZONE
+
+    AC_CHECK_FUNCS(gmtime_r localtime_r)
+
+    AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [
+	AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_tzadj;],
+	    tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)])
+    if test $tcl_cv_member_tm_tzadj = yes ; then
+	AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?])
+    fi
+
+    AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [
+	AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_gmtoff;],
+	    tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)])
+    if test $tcl_cv_member_tm_gmtoff = yes ; then
+	AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?])
+    fi
+
+    #
+    # Its important to include time.h in this check, as some systems
+    # (like convex) have timezone functions, etc.
+    #
+    AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [
+	AC_TRY_COMPILE([#include <time.h>],
+	    [extern long timezone;
+	    timezone += 1;
+	    exit (0);],
+	    tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)])
+    if test $tcl_cv_timezone_long = yes ; then
+	AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?])
+    else
+	#
+	# On some systems (eg IRIX 6.2), timezone is a time_t and not a long.
+	#
+	AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [
+	    AC_TRY_COMPILE([#include <time.h>],
+		[extern time_t timezone;
+		timezone += 1;
+		exit (0);],
+		tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)])
+	if test $tcl_cv_timezone_time = yes ; then
+	    AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?])
+	fi
+    fi
+])
+
+#--------------------------------------------------------------------
+# TEA_BUGGY_STRTOD
+#
+#	Under Solaris 2.4, strtod returns the wrong value for the
+#	terminating character under some conditions.  Check for this
+#	and if the problem exists use a substitute procedure
+#	"fixstrtod" (provided by Tcl) that corrects the error.
+#	Also, on Compaq's Tru64 Unix 5.0,
+#	strtod(" ") returns 0.0 instead of a failure to convert.
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Might defines some of the following vars:
+#		strtod (=fixstrtod)
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_BUGGY_STRTOD], [
+    AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0)
+    if test "$tcl_strtod" = 1; then
+	AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[
+	    AC_TRY_RUN([
+		extern double strtod();
+		int main() {
+		    char *infString="Inf", *nanString="NaN", *spaceString=" ";
+		    char *term;
+		    double value;
+		    value = strtod(infString, &term);
+		    if ((term != infString) && (term[-1] == 0)) {
+			exit(1);
+		    }
+		    value = strtod(nanString, &term);
+		    if ((term != nanString) && (term[-1] == 0)) {
+			exit(1);
+		    }
+		    value = strtod(spaceString, &term);
+		    if (term == (spaceString+1)) {
+			exit(1);
+		    }
+		    exit(0);
+		}], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy,
+		    tcl_cv_strtod_buggy=buggy)])
+	if test "$tcl_cv_strtod_buggy" = buggy; then
+	    AC_LIBOBJ([fixstrtod])
+	    USE_COMPAT=1
+	    AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?])
+	fi
+    fi
+])
+
+#--------------------------------------------------------------------
+# TEA_TCL_LINK_LIBS
+#
+#	Search for the libraries needed to link the Tcl shell.
+#	Things like the math library (-lm) and socket stuff (-lsocket vs.
+#	-lnsl) are dealt with here.
+#
+# Arguments:
+#	Requires the following vars to be set in the Makefile:
+#		DL_LIBS (not in TEA, only needed in core)
+#		LIBS
+#		MATH_LIBS
+#
+# Results:
+#
+#	Substitutes the following vars:
+#		TCL_LIBS
+#		MATH_LIBS
+#
+#	Might append to the following vars:
+#		LIBS
+#
+#	Might define the following vars:
+#		HAVE_NET_ERRNO_H
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_TCL_LINK_LIBS], [
+    #--------------------------------------------------------------------
+    # On a few very rare systems, all of the libm.a stuff is
+    # already in libc.a.  Set compiler flags accordingly.
+    # Also, Linux requires the "ieee" library for math to work
+    # right (and it must appear before "-lm").
+    #--------------------------------------------------------------------
+
+    AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm")
+    AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"])
+
+    #--------------------------------------------------------------------
+    # Interactive UNIX requires -linet instead of -lsocket, plus it
+    # needs net/errno.h to define the socket-related error codes.
+    #--------------------------------------------------------------------
+
+    AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"])
+    AC_CHECK_HEADER(net/errno.h, [
+	AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have <net/errno.h>?])])
+
+    #--------------------------------------------------------------------
+    #	Check for the existence of the -lsocket and -lnsl libraries.
+    #	The order here is important, so that they end up in the right
+    #	order in the command line generated by make.  Here are some
+    #	special considerations:
+    #	1. Use "connect" and "accept" to check for -lsocket, and
+    #	   "gethostbyname" to check for -lnsl.
+    #	2. Use each function name only once:  can't redo a check because
+    #	   autoconf caches the results of the last check and won't redo it.
+    #	3. Use -lnsl and -lsocket only if they supply procedures that
+    #	   aren't already present in the normal libraries.  This is because
+    #	   IRIX 5.2 has libraries, but they aren't needed and they're
+    #	   bogus:  they goof up name resolution if used.
+    #	4. On some SVR4 systems, can't use -lsocket without -lnsl too.
+    #	   To get around this problem, check for both libraries together
+    #	   if -lsocket doesn't work by itself.
+    #--------------------------------------------------------------------
+
+    tcl_checkBoth=0
+    AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1)
+    if test "$tcl_checkSocket" = 1; then
+	AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt,
+	    LIBS="$LIBS -lsocket", tcl_checkBoth=1)])
+    fi
+    if test "$tcl_checkBoth" = 1; then
+	tk_oldLibs=$LIBS
+	LIBS="$LIBS -lsocket -lnsl"
+	AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs])
+    fi
+    AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname,
+	    [LIBS="$LIBS -lnsl"])])
+
+    # TEA specific: Don't perform the eval of the libraries here because
+    # DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS
+
+    TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}'
+    AC_SUBST(TCL_LIBS)
+    AC_SUBST(MATH_LIBS)
+])
+
+#--------------------------------------------------------------------
+# TEA_TCL_EARLY_FLAGS
+#
+#	Check for what flags are needed to be passed so the correct OS
+#	features are available.
+#
+# Arguments:
+#	None
+#
+# Results:
+#
+#	Might define the following vars:
+#		_ISOC99_SOURCE
+#		_LARGEFILE64_SOURCE
+#		_LARGEFILE_SOURCE64
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_TCL_EARLY_FLAG],[
+    AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]),
+	AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no,
+	    AC_TRY_COMPILE([[#define ]$1[ 1
+]$2], $3,
+		[tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes,
+		[tcl_cv_flag_]translit($1,[A-Z],[a-z])=no)))
+    if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then
+	AC_DEFINE($1, 1, [Add the ]$1[ flag when building])
+	tcl_flags="$tcl_flags $1"
+    fi
+])
+
+AC_DEFUN([TEA_TCL_EARLY_FLAGS],[
+    AC_MSG_CHECKING([for required early compiler flags])
+    tcl_flags=""
+    TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include <stdlib.h>],
+	[char *p = (char *)strtoll; char *q = (char *)strtoull;])
+    TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include <sys/stat.h>],
+	[struct stat64 buf; int i = stat64("/", &buf);])
+    TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include <sys/stat.h>],
+	[char *p = (char *)open64;])
+    if test "x${tcl_flags}" = "x" ; then
+	AC_MSG_RESULT([none])
+    else
+	AC_MSG_RESULT([${tcl_flags}])
+    fi
+])
+
+#--------------------------------------------------------------------
+# TEA_TCL_64BIT_FLAGS
+#
+#	Check for what is defined in the way of 64-bit features.
+#
+# Arguments:
+#	None
+#
+# Results:
+#
+#	Might define the following vars:
+#		TCL_WIDE_INT_IS_LONG
+#		TCL_WIDE_INT_TYPE
+#		HAVE_STRUCT_DIRENT64
+#		HAVE_STRUCT_STAT64
+#		HAVE_TYPE_OFF64_T
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_TCL_64BIT_FLAGS], [
+    AC_MSG_CHECKING([for 64-bit integer type])
+    AC_CACHE_VAL(tcl_cv_type_64bit,[
+	tcl_cv_type_64bit=none
+	# See if the compiler knows natively about __int64
+	AC_TRY_COMPILE(,[__int64 value = (__int64) 0;],
+	    tcl_type_64bit=__int64, tcl_type_64bit="long long")
+	# See if we should use long anyway  Note that we substitute in the
+	# type that is our current guess for a 64-bit type inside this check
+	# program, so it should be modified only carefully...
+        AC_TRY_COMPILE(,[switch (0) {
+            case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ;
+        }],tcl_cv_type_64bit=${tcl_type_64bit})])
+    if test "${tcl_cv_type_64bit}" = none ; then
+	AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?])
+	AC_MSG_RESULT([using long])
+    elif test "${tcl_cv_type_64bit}" = "__int64" \
+		-a "${TEA_PLATFORM}" = "windows" ; then
+	# TEA specific: We actually want to use the default tcl.h checks in
+	# this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER*
+	AC_MSG_RESULT([using Tcl header defaults])
+    else
+	AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit},
+	    [What type should be used to define wide integers?])
+	AC_MSG_RESULT([${tcl_cv_type_64bit}])
+
+	# Now check for auxiliary declarations
+	AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[
+	    AC_TRY_COMPILE([#include <sys/types.h>
+#include <dirent.h>],[struct dirent64 p;],
+		tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)])
+	if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then
+	    AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in <sys/types.h>?])
+	fi
+
+	AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[
+	    AC_TRY_COMPILE([#include <sys/stat.h>],[struct stat64 p;
+],
+		tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)])
+	if test "x${tcl_cv_struct_stat64}" = "xyes" ; then
+	    AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in <sys/stat.h>?])
+	fi
+
+	AC_CHECK_FUNCS(open64 lseek64)
+	AC_MSG_CHECKING([for off64_t])
+	AC_CACHE_VAL(tcl_cv_type_off64_t,[
+	    AC_TRY_COMPILE([#include <sys/types.h>],[off64_t offset;
+],
+		tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)])
+	dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the
+	dnl functions lseek64 and open64 are defined.
+	if test "x${tcl_cv_type_off64_t}" = "xyes" && \
+	        test "x${ac_cv_func_lseek64}" = "xyes" && \
+	        test "x${ac_cv_func_open64}" = "xyes" ; then
+	    AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in <sys/types.h>?])
+	    AC_MSG_RESULT([yes])
+	else
+	    AC_MSG_RESULT([no])
+	fi
+    fi
+])
+
+##
+## Here ends the standard Tcl configuration bits and starts the
+## TEA specific functions
+##
+
+#------------------------------------------------------------------------
+# TEA_INIT --
+#
+#	Init various Tcl Extension Architecture (TEA) variables.
+#	This should be the first called TEA_* macro.
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Defines and substs the following vars:
+#		CYGPATH
+#		EXEEXT
+#	Defines only:
+#		TEA_VERSION
+#		TEA_INITED
+#		TEA_PLATFORM (windows or unix)
+#
+# "cygpath" is used on windows to generate native path names for include
+# files. These variables should only be used with the compiler and linker
+# since they generate native path names.
+#
+# EXEEXT
+#	Select the executable extension based on the host type.  This
+#	is a lightweight replacement for AC_EXEEXT that doesn't require
+#	a compiler.
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_INIT], [
+    # TEA extensions pass this us the version of TEA they think they
+    # are compatible with.
+    TEA_VERSION="3.9"
+
+    AC_MSG_CHECKING([for correct TEA configuration])
+    if test x"${PACKAGE_NAME}" = x ; then
+	AC_MSG_ERROR([
+The PACKAGE_NAME variable must be defined by your TEA configure.in])
+    fi
+    if test x"$1" = x ; then
+	AC_MSG_ERROR([
+TEA version not specified.])
+    elif test "$1" != "${TEA_VERSION}" ; then
+	AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"])
+    else
+	AC_MSG_RESULT([ok (TEA ${TEA_VERSION})])
+    fi
+
+    # If the user did not set CFLAGS, set it now to keep macros
+    # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2".
+    if test "${CFLAGS+set}" != "set" ; then
+	CFLAGS=""
+    fi
+
+    case "`uname -s`" in
+	*win32*|*WIN32*|*MINGW32_*)
+	    AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo)
+	    EXEEXT=".exe"
+	    TEA_PLATFORM="windows"
+	    ;;
+	*CYGWIN_*)
+	    CYGPATH=echo
+	    EXEEXT=".exe"
+	    # TEA_PLATFORM is determined later in LOAD_TCLCONFIG
+	    ;;
+	*)
+	    CYGPATH=echo
+	    # Maybe we are cross-compiling....
+	    case ${host_alias} in
+		*mingw32*)
+		EXEEXT=".exe"
+		TEA_PLATFORM="windows"
+		;;
+	    *)
+		EXEEXT=""
+		TEA_PLATFORM="unix"
+		;;
+	    esac
+	    ;;
+    esac
+
+    # Check if exec_prefix is set. If not use fall back to prefix.
+    # Note when adjusted, so that TEA_PREFIX can correct for this.
+    # This is needed for recursive configures, since autoconf propagates
+    # $prefix, but not $exec_prefix (doh!).
+    if test x$exec_prefix = xNONE ; then
+	exec_prefix_default=yes
+	exec_prefix=$prefix
+    fi
+
+    AC_MSG_NOTICE([configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}])
+
+    AC_SUBST(EXEEXT)
+    AC_SUBST(CYGPATH)
+
+    # This package name must be replaced statically for AC_SUBST to work
+    AC_SUBST(PKG_LIB_FILE)
+    # Substitute STUB_LIB_FILE in case package creates a stub library too.
+    AC_SUBST(PKG_STUB_LIB_FILE)
+
+    # We AC_SUBST these here to ensure they are subst'ed,
+    # in case the user doesn't call TEA_ADD_...
+    AC_SUBST(PKG_STUB_SOURCES)
+    AC_SUBST(PKG_STUB_OBJECTS)
+    AC_SUBST(PKG_TCL_SOURCES)
+    AC_SUBST(PKG_HEADERS)
+    AC_SUBST(PKG_INCLUDES)
+    AC_SUBST(PKG_LIBS)
+    AC_SUBST(PKG_CFLAGS)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_SOURCES --
+#
+#	Specify one or more source files.  Users should check for
+#	the right platform before adding to their list.
+#	It is not important to specify the directory, as long as it is
+#	in the generic, win or unix subdirectory of $(srcdir).
+#
+# Arguments:
+#	one or more file names
+#
+# Results:
+#
+#	Defines and substs the following vars:
+#		PKG_SOURCES
+#		PKG_OBJECTS
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_SOURCES], [
+    vars="$@"
+    for i in $vars; do
+	case $i in
+	    [\$]*)
+		# allow $-var names
+		PKG_SOURCES="$PKG_SOURCES $i"
+		PKG_OBJECTS="$PKG_OBJECTS $i"
+		;;
+	    *)
+		# check for existence - allows for generic/win/unix VPATH
+		# To add more dirs here (like 'src'), you have to update VPATH
+		# in Makefile.in as well
+		if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
+		    -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
+		    -a ! -f "${srcdir}/macosx/$i" \
+		    ; then
+		    AC_MSG_ERROR([could not find source file '$i'])
+		fi
+		PKG_SOURCES="$PKG_SOURCES $i"
+		# this assumes it is in a VPATH dir
+		i=`basename $i`
+		# handle user calling this before or after TEA_SETUP_COMPILER
+		if test x"${OBJEXT}" != x ; then
+		    j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
+		else
+		    j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
+		fi
+		PKG_OBJECTS="$PKG_OBJECTS $j"
+		;;
+	esac
+    done
+    AC_SUBST(PKG_SOURCES)
+    AC_SUBST(PKG_OBJECTS)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_STUB_SOURCES --
+#
+#	Specify one or more source files.  Users should check for
+#	the right platform before adding to their list.
+#	It is not important to specify the directory, as long as it is
+#	in the generic, win or unix subdirectory of $(srcdir).
+#
+# Arguments:
+#	one or more file names
+#
+# Results:
+#
+#	Defines and substs the following vars:
+#		PKG_STUB_SOURCES
+#		PKG_STUB_OBJECTS
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_STUB_SOURCES], [
+    vars="$@"
+    for i in $vars; do
+	# check for existence - allows for generic/win/unix VPATH
+	if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
+	    -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
+	    -a ! -f "${srcdir}/macosx/$i" \
+	    ; then
+	    AC_MSG_ERROR([could not find stub source file '$i'])
+	fi
+	PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i"
+	# this assumes it is in a VPATH dir
+	i=`basename $i`
+	# handle user calling this before or after TEA_SETUP_COMPILER
+	if test x"${OBJEXT}" != x ; then
+	    j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
+	else
+	    j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
+	fi
+	PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j"
+    done
+    AC_SUBST(PKG_STUB_SOURCES)
+    AC_SUBST(PKG_STUB_OBJECTS)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_TCL_SOURCES --
+#
+#	Specify one or more Tcl source files.  These should be platform
+#	independent runtime files.
+#
+# Arguments:
+#	one or more file names
+#
+# Results:
+#
+#	Defines and substs the following vars:
+#		PKG_TCL_SOURCES
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_TCL_SOURCES], [
+    vars="$@"
+    for i in $vars; do
+	# check for existence, be strict because it is installed
+	if test ! -f "${srcdir}/$i" ; then
+	    AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i'])
+	fi
+	PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i"
+    done
+    AC_SUBST(PKG_TCL_SOURCES)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_HEADERS --
+#
+#	Specify one or more source headers.  Users should check for
+#	the right platform before adding to their list.
+#
+# Arguments:
+#	one or more file names
+#
+# Results:
+#
+#	Defines and substs the following vars:
+#		PKG_HEADERS
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_HEADERS], [
+    vars="$@"
+    for i in $vars; do
+	# check for existence, be strict because it is installed
+	if test ! -f "${srcdir}/$i" ; then
+	    AC_MSG_ERROR([could not find header file '${srcdir}/$i'])
+	fi
+	PKG_HEADERS="$PKG_HEADERS $i"
+    done
+    AC_SUBST(PKG_HEADERS)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_INCLUDES --
+#
+#	Specify one or more include dirs.  Users should check for
+#	the right platform before adding to their list.
+#
+# Arguments:
+#	one or more file names
+#
+# Results:
+#
+#	Defines and substs the following vars:
+#		PKG_INCLUDES
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_INCLUDES], [
+    vars="$@"
+    for i in $vars; do
+	PKG_INCLUDES="$PKG_INCLUDES $i"
+    done
+    AC_SUBST(PKG_INCLUDES)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_LIBS --
+#
+#	Specify one or more libraries.  Users should check for
+#	the right platform before adding to their list.  For Windows,
+#	libraries provided in "foo.lib" format will be converted to
+#	"-lfoo" when using GCC (mingw).
+#
+# Arguments:
+#	one or more file names
+#
+# Results:
+#
+#	Defines and substs the following vars:
+#		PKG_LIBS
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_LIBS], [
+    vars="$@"
+    for i in $vars; do
+	if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then
+	    # Convert foo.lib to -lfoo for GCC.  No-op if not *.lib
+	    i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'`
+	fi
+	PKG_LIBS="$PKG_LIBS $i"
+    done
+    AC_SUBST(PKG_LIBS)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_CFLAGS --
+#
+#	Specify one or more CFLAGS.  Users should check for
+#	the right platform before adding to their list.
+#
+# Arguments:
+#	one or more file names
+#
+# Results:
+#
+#	Defines and substs the following vars:
+#		PKG_CFLAGS
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_CFLAGS], [
+    PKG_CFLAGS="$PKG_CFLAGS $@"
+    AC_SUBST(PKG_CFLAGS)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_CLEANFILES --
+#
+#	Specify one or more CLEANFILES.
+#
+# Arguments:
+#	one or more file names to clean target
+#
+# Results:
+#
+#	Appends to CLEANFILES, already defined for subst in LOAD_TCLCONFIG
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_CLEANFILES], [
+    CLEANFILES="$CLEANFILES $@"
+])
+
+#------------------------------------------------------------------------
+# TEA_PREFIX --
+#
+#	Handle the --prefix=... option by defaulting to what Tcl gave
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	If --prefix or --exec-prefix was not specified, $prefix and
+#	$exec_prefix will be set to the values given to Tcl when it was
+#	configured.
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_PREFIX], [
+    if test "${prefix}" = "NONE"; then
+	prefix_default=yes
+	if test x"${TCL_PREFIX}" != x; then
+	    AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}])
+	    prefix=${TCL_PREFIX}
+	else
+	    AC_MSG_NOTICE([--prefix defaulting to /usr/local])
+	    prefix=/usr/local
+	fi
+    fi
+    if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \
+	-o x"${exec_prefix_default}" = x"yes" ; then
+	if test x"${TCL_EXEC_PREFIX}" != x; then
+	    AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}])
+	    exec_prefix=${TCL_EXEC_PREFIX}
+	else
+	    AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}])
+	    exec_prefix=$prefix
+	fi
+    fi
+])
+
+#------------------------------------------------------------------------
+# TEA_SETUP_COMPILER_CC --
+#
+#	Do compiler checks the way we want.  This is just a replacement
+#	for AC_PROG_CC in TEA configure.in files to make them cleaner.
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Sets up CC var and other standard bits we need to make executables.
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_SETUP_COMPILER_CC], [
+    # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE)
+    # in this macro, they need to go into TEA_SETUP_COMPILER instead.
+
+    AC_PROG_CC
+    AC_PROG_CPP
+
+    INSTALL="\$(SHELL) \$(srcdir)/tclconfig/install-sh -c"
+    AC_SUBST(INSTALL)
+    INSTALL_DATA="\${INSTALL} -m 644"
+    AC_SUBST(INSTALL_DATA)
+    INSTALL_PROGRAM="\${INSTALL}"
+    AC_SUBST(INSTALL_PROGRAM)
+    INSTALL_SCRIPT="\${INSTALL}"
+    AC_SUBST(INSTALL_SCRIPT)
+
+    #--------------------------------------------------------------------
+    # Checks to see if the make program sets the $MAKE variable.
+    #--------------------------------------------------------------------
+
+    AC_PROG_MAKE_SET
+
+    #--------------------------------------------------------------------
+    # Find ranlib
+    #--------------------------------------------------------------------
+
+    AC_CHECK_TOOL(RANLIB, ranlib)
+
+    #--------------------------------------------------------------------
+    # Determines the correct binary file extension (.o, .obj, .exe etc.)
+    #--------------------------------------------------------------------
+
+    AC_OBJEXT
+    AC_EXEEXT
+])
+
+#------------------------------------------------------------------------
+# TEA_SETUP_COMPILER --
+#
+#	Do compiler checks that use the compiler.  This must go after
+#	TEA_SETUP_COMPILER_CC, which does the actual compiler check.
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Sets up CC var and other standard bits we need to make executables.
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_SETUP_COMPILER], [
+    # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here.
+    AC_REQUIRE([TEA_SETUP_COMPILER_CC])
+
+    #------------------------------------------------------------------------
+    # If we're using GCC, see if the compiler understands -pipe. If so, use it.
+    # It makes compiling go faster.  (This is only a performance feature.)
+    #------------------------------------------------------------------------
+
+    if test -z "$no_pipe" -a -n "$GCC"; then
+	AC_CACHE_CHECK([if the compiler understands -pipe],
+	    tcl_cv_cc_pipe, [
+	    hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe"
+	    AC_TRY_COMPILE(,, tcl_cv_cc_pipe=yes, tcl_cv_cc_pipe=no)
+	    CFLAGS=$hold_cflags])
+	if test $tcl_cv_cc_pipe = yes; then
+	    CFLAGS="$CFLAGS -pipe"
+	fi
+    fi
+
+    #--------------------------------------------------------------------
+    # Common compiler flag setup
+    #--------------------------------------------------------------------
+
+    AC_C_BIGENDIAN
+    if test "${TEA_PLATFORM}" = "unix" ; then
+	TEA_TCL_LINK_LIBS
+	TEA_MISSING_POSIX_HEADERS
+	# Let the user call this, because if it triggers, they will
+	# need a compat/strtod.c that is correct.  Users can also
+	# use Tcl_GetDouble(FromObj) instead.
+	#TEA_BUGGY_STRTOD
+    fi
+])
+
+#------------------------------------------------------------------------
+# TEA_MAKE_LIB --
+#
+#	Generate a line that can be used to build a shared/unshared library
+#	in a platform independent manner.
+#
+# Arguments:
+#	none
+#
+#	Requires:
+#
+# Results:
+#
+#	Defines the following vars:
+#	CFLAGS -	Done late here to note disturb other AC macros
+#       MAKE_LIB -      Command to execute to build the Tcl library;
+#                       differs depending on whether or not Tcl is being
+#                       compiled as a shared library.
+#	MAKE_SHARED_LIB	Makefile rule for building a shared library
+#	MAKE_STATIC_LIB	Makefile rule for building a static library
+#	MAKE_STUB_LIB	Makefile rule for building a stub library
+#	VC_MANIFEST_EMBED_DLL Makefile rule for embedded VC manifest in DLL
+#	VC_MANIFEST_EMBED_EXE Makefile rule for embedded VC manifest in EXE
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_MAKE_LIB], [
+    if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then
+	MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)"
+	MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)"
+	AC_EGREP_CPP([manifest needed], [
+#if defined(_MSC_VER) && _MSC_VER >= 1400
+print("manifest needed")
+#endif
+	], [
+	# Could do a CHECK_PROG for mt, but should always be with MSVC8+
+	VC_MANIFEST_EMBED_DLL="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;2 ; fi"
+	VC_MANIFEST_EMBED_EXE="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;1 ; fi"
+	MAKE_SHARED_LIB="${MAKE_SHARED_LIB} ; ${VC_MANIFEST_EMBED_DLL}"
+	TEA_ADD_CLEANFILES([*.manifest])
+	])
+	MAKE_STUB_LIB="\${STLIB_LD} -nodefaultlib -out:\[$]@ \$(PKG_STUB_OBJECTS)"
+    else
+	MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)"
+	MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}"
+	MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)"
+    fi
+
+    if test "${SHARED_BUILD}" = "1" ; then
+	MAKE_LIB="${MAKE_SHARED_LIB} "
+    else
+	MAKE_LIB="${MAKE_STATIC_LIB} "
+    fi
+
+    #--------------------------------------------------------------------
+    # Shared libraries and static libraries have different names.
+    # Use the double eval to make sure any variables in the suffix is
+    # substituted. (@@@ Might not be necessary anymore)
+    #--------------------------------------------------------------------
+
+    if test "${TEA_PLATFORM}" = "windows" ; then
+	if test "${SHARED_BUILD}" = "1" ; then
+	    # We force the unresolved linking of symbols that are really in
+	    # the private libraries of Tcl and Tk.
+	    if test x"${TK_BIN_DIR}" != x ; then
+		SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\""
+	    fi
+	    SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\""
+	    if test "$GCC" = "yes"; then
+		SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -static-libgcc"
+	    fi
+	    eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
+	else
+	    eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
+	    if test "$GCC" = "yes"; then
+		PKG_LIB_FILE=lib${PKG_LIB_FILE}
+	    fi
+	fi
+	# Some packages build their own stubs libraries
+	eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
+	if test "$GCC" = "yes"; then
+	    PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE}
+	fi
+	# These aren't needed on Windows (either MSVC or gcc)
+	RANLIB=:
+	RANLIB_STUB=:
+    else
+	RANLIB_STUB="${RANLIB}"
+	if test "${SHARED_BUILD}" = "1" ; then
+	    SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}"
+	    if test x"${TK_BIN_DIR}" != x ; then
+		SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}"
+	    fi
+	    eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
+	    RANLIB=:
+	else
+	    eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
+	fi
+	# Some packages build their own stubs libraries
+	eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
+    fi
+
+    # These are escaped so that only CFLAGS is picked up at configure time.
+    # The other values will be substituted at make time.
+    CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}"
+    if test "${SHARED_BUILD}" = "1" ; then
+	CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}"
+    fi
+
+    AC_SUBST(MAKE_LIB)
+    AC_SUBST(MAKE_SHARED_LIB)
+    AC_SUBST(MAKE_STATIC_LIB)
+    AC_SUBST(MAKE_STUB_LIB)
+    AC_SUBST(RANLIB_STUB)
+    AC_SUBST(VC_MANIFEST_EMBED_DLL)
+    AC_SUBST(VC_MANIFEST_EMBED_EXE)
+])
+
+#------------------------------------------------------------------------
+# TEA_LIB_SPEC --
+#
+#	Compute the name of an existing object library located in libdir
+#	from the given base name and produce the appropriate linker flags.
+#
+# Arguments:
+#	basename	The base name of the library without version
+#			numbers, extensions, or "lib" prefixes.
+#	extra_dir	Extra directory in which to search for the
+#			library.  This location is used first, then
+#			$prefix/$exec-prefix, then some defaults.
+#
+# Requires:
+#	TEA_INIT and TEA_PREFIX must be called first.
+#
+# Results:
+#
+#	Defines the following vars:
+#		${basename}_LIB_NAME	The computed library name.
+#		${basename}_LIB_SPEC	The computed linker flags.
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_LIB_SPEC], [
+    AC_MSG_CHECKING([for $1 library])
+
+    # Look in exec-prefix for the library (defined by TEA_PREFIX).
+
+    tea_lib_name_dir="${exec_prefix}/lib"
+
+    # Or in a user-specified location.
+
+    if test x"$2" != x ; then
+	tea_extra_lib_dir=$2
+    else
+	tea_extra_lib_dir=NONE
+    fi
+
+    for i in \
+	    `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
+	    `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \
+	    `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
+	    `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \
+	    `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \
+	    `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \
+	    `ls -dr /usr/lib64/$1[[0-9]]*.lib 2>/dev/null ` \
+	    `ls -dr /usr/lib64/lib$1[[0-9]]* 2>/dev/null ` \
+	    `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \
+	    `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do
+	if test -f "$i" ; then
+	    tea_lib_name_dir=`dirname $i`
+	    $1_LIB_NAME=`basename $i`
+	    $1_LIB_PATH_NAME=$i
+	    break
+	fi
+    done
+
+    if test "${TEA_PLATFORM}" = "windows"; then
+	$1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\"
+    else
+	# Strip off the leading "lib" and trailing ".a" or ".so"
+
+	tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'`
+	$1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}"
+    fi
+
+    if test "x${$1_LIB_NAME}" = x ; then
+	AC_MSG_ERROR([not found])
+    else
+	AC_MSG_RESULT([${$1_LIB_SPEC}])
+    fi
+])
+
+#------------------------------------------------------------------------
+# TEA_PRIVATE_TCL_HEADERS --
+#
+#	Locate the private Tcl include files
+#
+# Arguments:
+#
+#	Requires:
+#		TCL_SRC_DIR	Assumes that TEA_LOAD_TCLCONFIG has
+#				already been called.
+#
+# Results:
+#
+#	Substitutes the following vars:
+#		TCL_TOP_DIR_NATIVE
+#		TCL_INCLUDES
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [
+    # Allow for --with-tclinclude to take effect and define ${ac_cv_c_tclh}
+    AC_REQUIRE([TEA_PUBLIC_TCL_HEADERS])
+    AC_MSG_CHECKING([for Tcl private include files])
+
+    TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}`
+    TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\"
+
+    # Check to see if tcl<Plat>Port.h isn't already with the public headers
+    # Don't look for tclInt.h because that resides with tcl.h in the core
+    # sources, but the <plat>Port headers are in a different directory
+    if test "${TEA_PLATFORM}" = "windows" -a \
+	-f "${ac_cv_c_tclh}/tclWinPort.h"; then
+	result="private headers found with public headers"
+    elif test "${TEA_PLATFORM}" = "unix" -a \
+	-f "${ac_cv_c_tclh}/tclUnixPort.h"; then
+	result="private headers found with public headers"
+    else
+	TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\"
+	if test "${TEA_PLATFORM}" = "windows"; then
+	    TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\"
+	else
+	    TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\"
+	fi
+	# Overwrite the previous TCL_INCLUDES as this should capture both
+	# public and private headers in the same set.
+	# We want to ensure these are substituted so as not to require
+	# any *_NATIVE vars be defined in the Makefile
+	TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}"
+	if test "`uname -s`" = "Darwin"; then
+            # If Tcl was built as a framework, attempt to use
+            # the framework's Headers and PrivateHeaders directories
+            case ${TCL_DEFS} in
+	    	*TCL_FRAMEWORK*)
+		    if test -d "${TCL_BIN_DIR}/Headers" -a \
+			    -d "${TCL_BIN_DIR}/PrivateHeaders"; then
+			TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}"
+		    else
+			TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`"
+		    fi
+	            ;;
+	    esac
+	    result="Using ${TCL_INCLUDES}"
+	else
+	    if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then
+		AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}])
+	    fi
+	    result="Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}"
+	fi
+    fi
+
+    AC_SUBST(TCL_TOP_DIR_NATIVE)
+
+    AC_SUBST(TCL_INCLUDES)
+    AC_MSG_RESULT([${result}])
+])
+
+#------------------------------------------------------------------------
+# TEA_PUBLIC_TCL_HEADERS --
+#
+#	Locate the installed public Tcl header files
+#
+# Arguments:
+#	None.
+#
+# Requires:
+#	CYGPATH must be set
+#
+# Results:
+#
+#	Adds a --with-tclinclude switch to configure.
+#	Result is cached.
+#
+#	Substitutes the following vars:
+#		TCL_INCLUDES
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [
+    AC_MSG_CHECKING([for Tcl public headers])
+
+    AC_ARG_WITH(tclinclude, [  --with-tclinclude       directory containing the public Tcl header files], with_tclinclude=${withval})
+
+    AC_CACHE_VAL(ac_cv_c_tclh, [
+	# Use the value from --with-tclinclude, if it was given
+
+	if test x"${with_tclinclude}" != x ; then
+	    if test -f "${with_tclinclude}/tcl.h" ; then
+		ac_cv_c_tclh=${with_tclinclude}
+	    else
+		AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h])
+	    fi
+	else
+	    list=""
+	    if test "`uname -s`" = "Darwin"; then
+		# If Tcl was built as a framework, attempt to use
+		# the framework's Headers directory
+		case ${TCL_DEFS} in
+		    *TCL_FRAMEWORK*)
+			list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`"
+			;;
+		esac
+	    fi
+
+	    # Look in the source dir only if Tcl is not installed,
+	    # and in that situation, look there before installed locations.
+	    if test -f "${TCL_BIN_DIR}/Makefile" ; then
+		list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`"
+	    fi
+
+	    # Check order: pkg --prefix location, Tcl's --prefix location,
+	    # relative to directory of tclConfig.sh.
+
+	    eval "temp_includedir=${includedir}"
+	    list="$list \
+		`ls -d ${temp_includedir}        2>/dev/null` \
+		`ls -d ${TCL_PREFIX}/include     2>/dev/null` \
+		`ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`"
+	    if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
+		list="$list /usr/local/include /usr/include"
+		if test x"${TCL_INCLUDE_SPEC}" != x ; then
+		    d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'`
+		    list="$list `ls -d ${d} 2>/dev/null`"
+		fi
+	    fi
+	    for i in $list ; do
+		if test -f "$i/tcl.h" ; then
+		    ac_cv_c_tclh=$i
+		    break
+		fi
+	    done
+	fi
+    ])
+
+    # Print a message based on how we determined the include path
+
+    if test x"${ac_cv_c_tclh}" = x ; then
+	AC_MSG_ERROR([tcl.h not found.  Please specify its location with --with-tclinclude])
+    else
+	AC_MSG_RESULT([${ac_cv_c_tclh}])
+    fi
+
+    # Convert to a native path and substitute into the output files.
+
+    INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}`
+
+    TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
+
+    AC_SUBST(TCL_INCLUDES)
+])
+
+#------------------------------------------------------------------------
+# TEA_PRIVATE_TK_HEADERS --
+#
+#	Locate the private Tk include files
+#
+# Arguments:
+#
+#	Requires:
+#		TK_SRC_DIR	Assumes that TEA_LOAD_TKCONFIG has
+#				 already been called.
+#
+# Results:
+#
+#	Substitutes the following vars:
+#		TK_INCLUDES
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [
+    # Allow for --with-tkinclude to take effect and define ${ac_cv_c_tkh}
+    AC_REQUIRE([TEA_PUBLIC_TK_HEADERS])
+    AC_MSG_CHECKING([for Tk private include files])
+
+    TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}`
+    TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\"
+
+    # Check to see if tk<Plat>Port.h isn't already with the public headers
+    # Don't look for tkInt.h because that resides with tk.h in the core
+    # sources, but the <plat>Port headers are in a different directory
+    if test "${TEA_PLATFORM}" = "windows" -a \
+	-f "${ac_cv_c_tkh}/tkWinPort.h"; then
+	result="private headers found with public headers"
+    elif test "${TEA_PLATFORM}" = "unix" -a \
+	-f "${ac_cv_c_tkh}/tkUnixPort.h"; then
+	result="private headers found with public headers"
+    else
+	TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\"
+	TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\"
+	if test "${TEA_PLATFORM}" = "windows"; then
+	    TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\"
+	else
+	    TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\"
+	fi
+	# Overwrite the previous TK_INCLUDES as this should capture both
+	# public and private headers in the same set.
+	# We want to ensure these are substituted so as not to require
+	# any *_NATIVE vars be defined in the Makefile
+	TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}"
+	# Detect and add ttk subdir
+	if test -d "${TK_SRC_DIR}/generic/ttk"; then
+	   TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/generic/ttk\""
+	fi
+	if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then
+	   TK_INCLUDES="${TK_INCLUDES} -I\"${TK_XLIB_DIR_NATIVE}\""
+	fi
+	if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then
+	   TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/macosx\""
+	fi
+	if test "`uname -s`" = "Darwin"; then
+	    # If Tk was built as a framework, attempt to use
+	    # the framework's Headers and PrivateHeaders directories
+	    case ${TK_DEFS} in
+		*TK_FRAMEWORK*)
+			if test -d "${TK_BIN_DIR}/Headers" -a \
+				-d "${TK_BIN_DIR}/PrivateHeaders"; then
+			    TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}"
+			else
+			    TK_INCLUDES="${TK_INCLUDES} ${TK_INCLUDE_SPEC} `echo "${TK_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`"
+			fi
+			;;
+	    esac
+	    result="Using ${TK_INCLUDES}"
+	else
+	    if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then
+	       AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}])
+	    fi
+	    result="Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}"
+	fi
+    fi
+
+    AC_SUBST(TK_TOP_DIR_NATIVE)
+    AC_SUBST(TK_XLIB_DIR_NATIVE)
+
+    AC_SUBST(TK_INCLUDES)
+    AC_MSG_RESULT([${result}])
+])
+
+#------------------------------------------------------------------------
+# TEA_PUBLIC_TK_HEADERS --
+#
+#	Locate the installed public Tk header files
+#
+# Arguments:
+#	None.
+#
+# Requires:
+#	CYGPATH must be set
+#
+# Results:
+#
+#	Adds a --with-tkinclude switch to configure.
+#	Result is cached.
+#
+#	Substitutes the following vars:
+#		TK_INCLUDES
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [
+    AC_MSG_CHECKING([for Tk public headers])
+
+    AC_ARG_WITH(tkinclude, [  --with-tkinclude        directory containing the public Tk header files], with_tkinclude=${withval})
+
+    AC_CACHE_VAL(ac_cv_c_tkh, [
+	# Use the value from --with-tkinclude, if it was given
+
+	if test x"${with_tkinclude}" != x ; then
+	    if test -f "${with_tkinclude}/tk.h" ; then
+		ac_cv_c_tkh=${with_tkinclude}
+	    else
+		AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h])
+	    fi
+	else
+	    list=""
+	    if test "`uname -s`" = "Darwin"; then
+		# If Tk was built as a framework, attempt to use
+		# the framework's Headers directory.
+		case ${TK_DEFS} in
+		    *TK_FRAMEWORK*)
+			list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`"
+			;;
+		esac
+	    fi
+
+	    # Look in the source dir only if Tk is not installed,
+	    # and in that situation, look there before installed locations.
+	    if test -f "${TK_BIN_DIR}/Makefile" ; then
+		list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`"
+	    fi
+
+	    # Check order: pkg --prefix location, Tk's --prefix location,
+	    # relative to directory of tkConfig.sh, Tcl's --prefix location,
+	    # relative to directory of tclConfig.sh.
+
+	    eval "temp_includedir=${includedir}"
+	    list="$list \
+		`ls -d ${temp_includedir}        2>/dev/null` \
+		`ls -d ${TK_PREFIX}/include      2>/dev/null` \
+		`ls -d ${TK_BIN_DIR}/../include  2>/dev/null` \
+		`ls -d ${TCL_PREFIX}/include     2>/dev/null` \
+		`ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`"
+	    if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
+		list="$list /usr/local/include /usr/include"
+		if test x"${TK_INCLUDE_SPEC}" != x ; then
+		    d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'`
+		    list="$list `ls -d ${d} 2>/dev/null`"
+		fi
+	    fi
+	    for i in $list ; do
+		if test -f "$i/tk.h" ; then
+		    ac_cv_c_tkh=$i
+		    break
+		fi
+	    done
+	fi
+    ])
+
+    # Print a message based on how we determined the include path
+
+    if test x"${ac_cv_c_tkh}" = x ; then
+	AC_MSG_ERROR([tk.h not found.  Please specify its location with --with-tkinclude])
+    else
+	AC_MSG_RESULT([${ac_cv_c_tkh}])
+    fi
+
+    # Convert to a native path and substitute into the output files.
+
+    INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}`
+
+    TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
+
+    AC_SUBST(TK_INCLUDES)
+
+    if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then
+	# On Windows and Aqua, we need the X compat headers
+	AC_MSG_CHECKING([for X11 header files])
+	if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then
+	    INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`"
+	    TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
+	    AC_SUBST(TK_XINCLUDES)
+	fi
+	AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}])
+    fi
+])
+
+#------------------------------------------------------------------------
+# TEA_PATH_CONFIG --
+#
+#	Locate the ${1}Config.sh file and perform a sanity check on
+#	the ${1} compile flags.  These are used by packages like
+#	[incr Tk] that load *Config.sh files from more than Tcl and Tk.
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--with-$1=...
+#
+#	Defines the following vars:
+#		$1_BIN_DIR	Full path to the directory containing
+#				the $1Config.sh file
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PATH_CONFIG], [
+    #
+    # Ok, lets find the $1 configuration
+    # First, look for one uninstalled.
+    # the alternative search directory is invoked by --with-$1
+    #
+
+    if test x"${no_$1}" = x ; then
+	# we reset no_$1 in case something fails here
+	no_$1=true
+	AC_ARG_WITH($1, [  --with-$1              directory containing $1 configuration ($1Config.sh)], with_$1config=${withval})
+	AC_MSG_CHECKING([for $1 configuration])
+	AC_CACHE_VAL(ac_cv_c_$1config,[
+
+	    # First check to see if --with-$1 was specified.
+	    if test x"${with_$1config}" != x ; then
+		case ${with_$1config} in
+		    */$1Config.sh )
+			if test -f ${with_$1config}; then
+			    AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself])
+			    with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'`
+			fi;;
+		esac
+		if test -f "${with_$1config}/$1Config.sh" ; then
+		    ac_cv_c_$1config=`(cd ${with_$1config}; pwd)`
+		else
+		    AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh])
+		fi
+	    fi
+
+	    # then check for a private $1 installation
+	    if test x"${ac_cv_c_$1config}" = x ; then
+		for i in \
+			../$1 \
+			`ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
+			`ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
+			`ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \
+			`ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
+			../../$1 \
+			`ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
+			`ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
+			`ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \
+			`ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
+			../../../$1 \
+			`ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
+			`ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
+			`ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \
+			`ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
+			${srcdir}/../$1 \
+			`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
+			`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
+			`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \
+			`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
+			; do
+		    if test -f "$i/$1Config.sh" ; then
+			ac_cv_c_$1config=`(cd $i; pwd)`
+			break
+		    fi
+		    if test -f "$i/unix/$1Config.sh" ; then
+			ac_cv_c_$1config=`(cd $i/unix; pwd)`
+			break
+		    fi
+		done
+	    fi
+
+	    # check in a few common install locations
+	    if test x"${ac_cv_c_$1config}" = x ; then
+		for i in `ls -d ${libdir} 2>/dev/null` \
+			`ls -d ${exec_prefix}/lib 2>/dev/null` \
+			`ls -d ${prefix}/lib 2>/dev/null` \
+			`ls -d /usr/local/lib 2>/dev/null` \
+			`ls -d /usr/contrib/lib 2>/dev/null` \
+			`ls -d /usr/lib 2>/dev/null` \
+			`ls -d /usr/lib64 2>/dev/null` \
+			; do
+		    if test -f "$i/$1Config.sh" ; then
+			ac_cv_c_$1config=`(cd $i; pwd)`
+			break
+		    fi
+		done
+	    fi
+	])
+
+	if test x"${ac_cv_c_$1config}" = x ; then
+	    $1_BIN_DIR="# no $1 configs found"
+	    AC_MSG_WARN([Cannot find $1 configuration definitions])
+	    exit 0
+	else
+	    no_$1=
+	    $1_BIN_DIR=${ac_cv_c_$1config}
+	    AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh])
+	fi
+    fi
+])
+
+#------------------------------------------------------------------------
+# TEA_LOAD_CONFIG --
+#
+#	Load the $1Config.sh file
+#
+# Arguments:
+#
+#	Requires the following vars to be set:
+#		$1_BIN_DIR
+#
+# Results:
+#
+#	Substitutes the following vars:
+#		$1_SRC_DIR
+#		$1_LIB_FILE
+#		$1_LIB_SPEC
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_LOAD_CONFIG], [
+    AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh])
+
+    if test -f "${$1_BIN_DIR}/$1Config.sh" ; then
+        AC_MSG_RESULT([loading])
+	. "${$1_BIN_DIR}/$1Config.sh"
+    else
+        AC_MSG_RESULT([file not found])
+    fi
+
+    #
+    # If the $1_BIN_DIR is the build directory (not the install directory),
+    # then set the common variable name to the value of the build variables.
+    # For example, the variable $1_LIB_SPEC will be set to the value
+    # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC
+    # instead of $1_BUILD_LIB_SPEC since it will work with both an
+    # installed and uninstalled version of Tcl.
+    #
+
+    if test -f "${$1_BIN_DIR}/Makefile" ; then
+	AC_MSG_WARN([Found Makefile - using build library specs for $1])
+        $1_LIB_SPEC=${$1_BUILD_LIB_SPEC}
+        $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC}
+        $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH}
+        $1_INCLUDE_SPEC=${$1_BUILD_INCLUDE_SPEC}
+        $1_LIBRARY_PATH=${$1_LIBRARY_PATH}
+    fi
+
+    AC_SUBST($1_VERSION)
+    AC_SUBST($1_BIN_DIR)
+    AC_SUBST($1_SRC_DIR)
+
+    AC_SUBST($1_LIB_FILE)
+    AC_SUBST($1_LIB_SPEC)
+
+    AC_SUBST($1_STUB_LIB_FILE)
+    AC_SUBST($1_STUB_LIB_SPEC)
+    AC_SUBST($1_STUB_LIB_PATH)
+
+    # Allow the caller to prevent this auto-check by specifying any 2nd arg
+    AS_IF([test "x$2" = x], [
+	# Check both upper and lower-case variants
+	# If a dev wanted non-stubs libs, this function could take an option
+	# to not use _STUB in the paths below
+	AS_IF([test "x${$1_STUB_LIB_SPEC}" = x],
+	    [TEA_LOAD_CONFIG_LIB(translit($1,[a-z],[A-Z])_STUB)],
+	    [TEA_LOAD_CONFIG_LIB($1_STUB)])
+    ])
+])
+
+#------------------------------------------------------------------------
+# TEA_LOAD_CONFIG_LIB --
+#
+#	Helper function to load correct library from another extension's
+#	${PACKAGE}Config.sh.
+#
+# Results:
+#	Adds to LIBS the appropriate extension library
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_LOAD_CONFIG_LIB], [
+    AC_MSG_CHECKING([For $1 library for LIBS])
+    # This simplifies the use of stub libraries by automatically adding
+    # the stub lib to your path.  Normally this would add to SHLIB_LD_LIBS,
+    # but this is called before CONFIG_CFLAGS.  More importantly, this adds
+    # to PKG_LIBS, which becomes LIBS, and that is only used by SHLIB_LD.
+    if test "x${$1_LIB_SPEC}" != "x" ; then
+	if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then
+	    TEA_ADD_LIBS([\"`${CYGPATH} ${$1_LIB_PATH}`\"])
+	    AC_MSG_RESULT([using $1_LIB_PATH ${$1_LIB_PATH}])
+	else
+	    TEA_ADD_LIBS([${$1_LIB_SPEC}])
+	    AC_MSG_RESULT([using $1_LIB_SPEC ${$1_LIB_SPEC}])
+	fi
+    else
+	AC_MSG_RESULT([file not found])
+    fi
+])
+
+#------------------------------------------------------------------------
+# TEA_EXPORT_CONFIG --
+#
+#	Define the data to insert into the ${PACKAGE}Config.sh file
+#
+# Arguments:
+#
+#	Requires the following vars to be set:
+#		$1
+#
+# Results:
+#	Substitutes the following vars:
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_EXPORT_CONFIG], [
+    #--------------------------------------------------------------------
+    # These are for $1Config.sh
+    #--------------------------------------------------------------------
+
+    # pkglibdir must be a fully qualified path and (not ${exec_prefix}/lib)
+    eval pkglibdir="[$]{libdir}/$1${PACKAGE_VERSION}"
+    if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then
+	eval $1_LIB_FLAG="-l$1${PACKAGE_VERSION}${DBGX}"
+	eval $1_STUB_LIB_FLAG="-l$1stub${PACKAGE_VERSION}${DBGX}"
+    else
+	eval $1_LIB_FLAG="-l$1`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}"
+	eval $1_STUB_LIB_FLAG="-l$1stub`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}"
+    fi
+    $1_BUILD_LIB_SPEC="-L`pwd` ${$1_LIB_FLAG}"
+    $1_LIB_SPEC="-L${pkglibdir} ${$1_LIB_FLAG}"
+    $1_BUILD_STUB_LIB_SPEC="-L`pwd` [$]{$1_STUB_LIB_FLAG}"
+    $1_STUB_LIB_SPEC="-L${pkglibdir} [$]{$1_STUB_LIB_FLAG}"
+    $1_BUILD_STUB_LIB_PATH="`pwd`/[$]{PKG_STUB_LIB_FILE}"
+    $1_STUB_LIB_PATH="${pkglibdir}/[$]{PKG_STUB_LIB_FILE}"
+
+    AC_SUBST($1_BUILD_LIB_SPEC)
+    AC_SUBST($1_LIB_SPEC)
+    AC_SUBST($1_BUILD_STUB_LIB_SPEC)
+    AC_SUBST($1_STUB_LIB_SPEC)
+    AC_SUBST($1_BUILD_STUB_LIB_PATH)
+    AC_SUBST($1_STUB_LIB_PATH)
+
+    AC_SUBST(MAJOR_VERSION)
+    AC_SUBST(MINOR_VERSION)
+    AC_SUBST(PATCHLEVEL)
+])
+
+
+#------------------------------------------------------------------------
+# TEA_PATH_CELIB --
+#
+#	Locate Keuchel's celib emulation layer for targeting Win/CE
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--with-celib=...
+#
+#	Defines the following vars:
+#		CELIB_DIR	Full path to the directory containing
+#				the include and platform lib files
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PATH_CELIB], [
+    # First, look for one uninstalled.
+    # the alternative search directory is invoked by --with-celib
+
+    if test x"${no_celib}" = x ; then
+	# we reset no_celib in case something fails here
+	no_celib=true
+	AC_ARG_WITH(celib,[  --with-celib=DIR        use Windows/CE support library from DIR], with_celibconfig=${withval})
+	AC_MSG_CHECKING([for Windows/CE celib directory])
+	AC_CACHE_VAL(ac_cv_c_celibconfig,[
+	    # First check to see if --with-celibconfig was specified.
+	    if test x"${with_celibconfig}" != x ; then
+		if test -d "${with_celibconfig}/inc" ; then
+		    ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)`
+		else
+		    AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory])
+		fi
+	    fi
+
+	    # then check for a celib library
+	    if test x"${ac_cv_c_celibconfig}" = x ; then
+		for i in \
+			../celib-palm-3.0 \
+			../celib \
+			../../celib-palm-3.0 \
+			../../celib \
+			`ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \
+			${srcdir}/../celib-palm-3.0 \
+			${srcdir}/../celib \
+			`ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \
+			; do
+		    if test -d "$i/inc" ; then
+			ac_cv_c_celibconfig=`(cd $i; pwd)`
+			break
+		    fi
+		done
+	    fi
+	])
+	if test x"${ac_cv_c_celibconfig}" = x ; then
+	    AC_MSG_ERROR([Cannot find celib support library directory])
+	else
+	    no_celib=
+	    CELIB_DIR=${ac_cv_c_celibconfig}
+	    CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'`
+	    AC_MSG_RESULT([found $CELIB_DIR])
+	fi
+    fi
+])
+
+
+# Local Variables:
+# mode: autoconf
+# End:
diff --git a/autoconf/tea/win/makefile.vc b/autoconf/tea/win/makefile.vc
new file mode 100644
index 0000000..a5e4627
--- /dev/null
+++ b/autoconf/tea/win/makefile.vc
@@ -0,0 +1,414 @@
+# makefile.vc --                                               -*- Makefile -*-
+#
+# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
+#
+# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to 
+# make it suitable as a general package makefile. Look for the word EDIT
+# which marks sections that may need modification. As a minumum you will
+# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
+# relevant to your package.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+# 
+# Copyright (c) 1995-1996 Sun Microsystems, Inc.
+# Copyright (c) 1998-2000 Ajuba Solutions.
+# Copyright (c) 2001 ActiveState Corporation.
+# Copyright (c) 2001-2002 David Gravereaux.
+# Copyright (c) 2003 Pat Thoyts
+#
+#-------------------------------------------------------------------------
+# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $
+#-------------------------------------------------------------------------
+
+!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
+MSG = ^
+You will need to run vcvars32.bat from Developer Studio, first, to setup^
+the environment.  Jump to this line to read the new instructions.
+!error $(MSG)
+!endif
+
+#------------------------------------------------------------------------------
+# HOW TO USE this makefile:
+#
+# 1)  It is now necessary to have %MSVCDir% set in the environment.  This is
+#     used  as a check to see if vcvars32.bat had been run prior to running
+#     nmake or during the installation of Microsoft Visual C++, MSVCDir had
+#     been set globally and the PATH adjusted.  Either way is valid.
+#
+#     You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
+#     directory to setup the proper environment, if needed, for your current
+#     setup.  This is a needed bootstrap requirement and allows the swapping of
+#     different environments to be easier.
+#
+# 2)  To use the Platform SDK (not expressly needed), run setenv.bat after
+#     vcvars32.bat according to the instructions for it.  This can also turn on
+#     the 64-bit compiler, if your SDK has it.
+#
+# 3)  Targets are:
+#	all       -- Builds everything.
+#       <project> -- Builds the project (eg: nmake sample)
+#	test      -- Builds and runs the test suite.
+#	install   -- Installs the built binaries and libraries to $(INSTALLDIR)
+#		     in an appropriate subdirectory.
+#	clean/realclean/distclean -- varying levels of cleaning.
+#
+# 4)  Macros usable on the commandline:
+#	INSTALLDIR=<path>
+#		Sets where to install Tcl from the built binaries.
+#		C:\Progra~1\Tcl is assumed when not specified.
+#
+#	OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
+#		Sets special options for the core.  The default is for none.
+#		Any combination of the above may be used (comma separated).
+#		'none' will over-ride everything to nothing.
+#
+#		static  =  Builds a static library of the core instead of a
+#			   dll.  The shell will be static (and large), as well.
+#		msvcrt  =  Effects the static option only to switch it from
+#			   using libcmt(d) as the C runtime [by default] to
+#			   msvcrt(d). This is useful for static embedding
+#			   support.
+#		staticpkg = Effects the static option only to switch
+#			   tclshXX.exe to have the dde and reg extension linked
+#			   inside it.
+#		threads =  Turns on full multithreading support.
+#		thrdalloc = Use the thread allocator (shared global free pool).
+#		symbols =  Adds symbols for step debugging.
+#		profile =  Adds profiling hooks.  Map file is assumed.
+#		loimpact =  Adds a flag for how NT treats the heap to keep memory
+#			   in use, low.  This is said to impact alloc performance.
+#
+#	STATS=memdbg,compdbg,none
+#		Sets optional memory and bytecode compiler debugging code added
+#		to the core.  The default is for none.  Any combination of the
+#		above may be used (comma separated).  'none' will over-ride
+#		everything to nothing.
+#
+#		memdbg   = Enables the debugging memory allocator.
+#		compdbg  = Enables byte compilation logging.
+#
+#	MACHINE=(IX86|IA64|ALPHA)
+#		Set the machine type used for the compiler, linker, and
+#		resource compiler.  This hook is needed to tell the tools
+#		when alternate platforms are requested.  IX86 is the default
+#		when not specified.
+#
+#	TMP_DIR=<path>
+#	OUT_DIR=<path>
+#		Hooks to allow the intermediate and output directories to be
+#		changed.  $(OUT_DIR) is assumed to be 
+#		$(BINROOT)\(Release|Debug) based on if symbols are requested.
+#		$(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
+#
+#	TESTPAT=<file>
+#		Reads the tests requested to be run from this file.
+#
+#	CFG_ENCODING=encoding
+#		name of encoding for configuration information. Defaults
+#		to cp1252
+#
+# 5)  Examples:
+#
+#	Basic syntax of calling nmake looks like this:
+#	nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
+#
+#                        Standard (no frills)
+#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+#       Setting environment for using Microsoft Visual C++ tools.
+#       c:\tcl_src\win\>nmake -f makefile.vc all
+#       c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
+#
+#                         Building for Win64
+#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+#       Setting environment for using Microsoft Visual C++ tools.
+#       c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
+#       Targeting Windows pre64 RETAIL
+#       c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
+#
+#------------------------------------------------------------------------------
+#==============================================================================
+###############################################################################
+#------------------------------------------------------------------------------
+
+!if !exist("makefile.vc")
+MSG = ^
+You must run this makefile only from the directory it is in.^
+Please `cd` to its location first.
+!error $(MSG)
+!endif
+
+#-------------------------------------------------------------------------
+# Project specific information (EDIT)
+#
+# You should edit this with the name and version of your project. This
+# information is used to generate the name of the package library and
+# it's install location.
+#
+# For example, the sample extension is  going to build sample04.dll and
+# would install it into $(INSTALLDIR)\lib\sample04
+#
+# You need to specify the object files that need to be linked into your
+# binary here.
+#
+#-------------------------------------------------------------------------
+
+PROJECT = sqlite3
+!include "rules.vc"
+
+# nmakehelp -V <file> <tag> will search the file for tag, skips until a
+#	number and returns all character until a character not in [0-9.ab]
+#	is read.
+
+!if [echo REM = This file is generated from Makefile.vc > versions.vc]
+!endif
+# get project version from row "AC_INIT([sqlite], [3.7.14])"
+!if [echo DOTVERSION = \>> versions.vc] \
+   && [nmakehlp -V ..\configure.in AC_INIT >> versions.vc]
+!endif
+!include "versions.vc"
+
+VERSION         = $(DOTVERSION:.=)
+STUBPREFIX      = $(PROJECT)stub
+
+DLLOBJS = \
+	$(TMP_DIR)\tclsqlite3.obj
+
+#-------------------------------------------------------------------------
+# Target names and paths ( shouldn't need changing )
+#-------------------------------------------------------------------------
+
+BINROOT		= .
+ROOT            = ..
+
+PRJIMPLIB	= $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
+PRJLIBNAME	= $(PROJECT)$(VERSION)$(SUFX).$(EXT)
+PRJLIB		= $(OUT_DIR)\$(PRJLIBNAME)
+
+PRJSTUBLIBNAME	= $(STUBPREFIX)$(VERSION).lib
+PRJSTUBLIB	= $(OUT_DIR)\$(PRJSTUBLIBNAME)
+
+### Make sure we use backslash only.
+PRJ_INSTALL_DIR         = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
+LIB_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
+BIN_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
+DOC_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
+SCRIPT_INSTALL_DIR	= $(PRJ_INSTALL_DIR)
+INCLUDE_INSTALL_DIR	= $(_TCLDIR)\include
+
+### The following paths CANNOT have spaces in them.
+GENERICDIR	= $(ROOT)\generic
+WINDIR		= $(ROOT)\win
+LIBDIR          = $(ROOT)\library
+DOCDIR		= $(ROOT)\doc
+TOOLSDIR	= $(ROOT)\tools
+COMPATDIR	= $(ROOT)\compat
+
+#---------------------------------------------------------------------
+# Compile flags
+#---------------------------------------------------------------------
+
+!if !$(DEBUG)
+!if $(OPTIMIZING)
+### This cranks the optimization level to maximize speed
+cdebug	= -O2 -Op -Gs
+!else
+cdebug	=
+!endif
+!else if "$(MACHINE)" == "IA64"
+### Warnings are too many, can't support warnings into errors.
+cdebug	= -Z7 -Od -GZ
+!else
+cdebug	= -Z7 -WX -Od -GZ
+!endif
+
+### Declarations common to all compiler options
+cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\
+
+!if $(MSVCRT)
+!if $(DEBUG)
+crt = -MDd
+!else
+crt = -MD
+!endif
+!else
+!if $(DEBUG)
+crt = -MTd
+!else
+crt = -MT
+!endif
+!endif
+
+INCLUDES	= $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" \
+                  -I"$(ROOT)\.."
+BASE_CLFAGS	= $(cflags) $(cdebug) $(crt) $(INCLUDES) \
+                  -DSQLITE_3_SUFFIX_ONLY=1 -DSQLITE_ENABLE_RTREE=1 \
+                  -DSQLITE_ENABLE_FTS3=1 -DSQLITE_OMIT_DEPRECATED=1
+CON_CFLAGS	= $(cflags) $(cdebug) $(crt) -DCONSOLE -DSQLITE_ENABLE_FTS3=1
+TCL_CFLAGS	= -DBUILD_sqlite -DUSE_TCL_STUBS \
+                  -DPACKAGE_VERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) \
+                  $(OPTDEFINES)
+
+#---------------------------------------------------------------------
+# Link flags
+#---------------------------------------------------------------------
+
+!if $(DEBUG)
+ldebug	= -debug:full -debugtype:cv
+!else
+ldebug	= -release -opt:ref -opt:icf,3
+!endif
+
+### Declarations common to all linker options
+lflags	= -nologo -machine:$(MACHINE) $(ldebug)
+
+!if $(PROFILE)
+lflags	= $(lflags) -profile
+!endif
+
+!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
+### Align sections for PE size savings.
+lflags	= $(lflags) -opt:nowin98
+!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
+### Align sections for speed in loading by choosing the virtual page size.
+lflags	= $(lflags) -align:4096
+!endif
+
+!if $(LOIMPACT)
+lflags	= $(lflags) -ws:aggressive
+!endif
+
+dlllflags = $(lflags) -dll
+conlflags = $(lflags) -subsystem:console
+guilflags = $(lflags) -subsystem:windows
+baselibs   = $(TCLSTUBLIB)
+
+#---------------------------------------------------------------------
+# TclTest flags
+#---------------------------------------------------------------------
+
+!IF "$(TESTPAT)" != ""
+TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
+!ENDIF
+
+#---------------------------------------------------------------------
+# Project specific targets (EDIT)
+#---------------------------------------------------------------------
+
+all:	    setup $(PROJECT)
+$(PROJECT): setup $(PRJLIB)
+install:    install-binaries install-libraries install-docs
+
+# Tests need to ensure we load the right dll file we
+# have to handle the output differently on Win9x.
+#
+!if "$(OS)" == "Windows_NT"  || "$(MSVCDIR)" == "IDE"
+test: setup $(PROJECT)
+        set TCL_LIBRARY=$(ROOT)/library
+        $(TCLSH) <<
+load $(PRJLIB:\=/)
+cd "$(ROOT)/tests"
+set argv "$(TESTFLAGS)"
+source all.tcl
+<<
+!else
+test: setup $(PROJECT)
+        echo Please wait while the test results are collected
+        set TCL_LIBRARY=$(ROOT)/library
+        $(TCLSH) << >tests.log
+load $(PRJLIB:\=/)
+cd "$(ROOT)/tests"
+set argv "$(TESTFLAGS)"
+source all.tcl
+<<
+        type tests.log | more
+!endif
+
+setup:
+	@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
+	@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
+
+$(PRJLIB): $(DLLOBJS)
+	$(link32) $(dlllflags) -out:$@ $(baselibs) @<<
+$**
+<<
+	-@del $*.exp
+
+$(PRJSTUBLIB): $(PRJSTUBOBJS)
+	$(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
+
+#---------------------------------------------------------------------
+# Implicit rules
+#---------------------------------------------------------------------
+
+{$(WINDIR)}.c{$(TMP_DIR)}.obj::
+    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
+    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
+    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(WINDIR)}.rc{$(TMP_DIR)}.res:
+	$(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
+!if $(DEBUG)
+	-d DEBUG \
+!endif
+!if $(TCL_THREADS)
+	-d TCL_THREADS \
+!endif
+!if $(STATIC_BUILD)
+	-d STATIC_BUILD \
+!endif
+	$<
+
+.SUFFIXES:
+.SUFFIXES:.c .rc
+
+#---------------------------------------------------------------------
+# Installation. (EDIT)
+#
+# You may need to modify this section to reflect the final distribution
+# of your files and possibly to generate documentation.
+#
+#---------------------------------------------------------------------
+
+install-binaries:
+	@echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
+	@if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
+	@$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
+
+install-libraries:
+        @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
+        @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)"
+        @echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
+        @type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl"
+package ifneeded $(PROJECT) $(DOTVERSION) \
+    [list load [file join $$dir $(PRJLIBNAME)] sqlite3]
+<<
+
+install-docs:
+	@echo Installing documentation files to '$(DOC_INSTALL_DIR)'
+	@if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)"
+
+#---------------------------------------------------------------------
+# Clean up
+#---------------------------------------------------------------------
+
+clean:
+	@if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
+	@if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc
+
+realclean: clean
+	@if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
+
+distclean: realclean
+	@if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
+	@if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj
diff --git a/autoconf/tea/win/nmakehlp.c b/autoconf/tea/win/nmakehlp.c
new file mode 100644
index 0000000..2868857
--- /dev/null
+++ b/autoconf/tea/win/nmakehlp.c
@@ -0,0 +1,694 @@
+/*
+ * ----------------------------------------------------------------------------
+ * nmakehlp.c --
+ *
+ *	This is used to fix limitations within nmake and the environment.
+ *
+ * Copyright (c) 2002 by David Gravereaux.
+ * Copyright (c) 2006 by Pat Thoyts
+ *
+ * See the file "license.terms" for information on usage and redistribution of
+ * this file, and for a DISCLAIMER OF ALL WARRANTIES.
+ * ----------------------------------------------------------------------------
+ */
+
+#define _CRT_SECURE_NO_DEPRECATE
+#include <windows.h>
+#define NO_SHLWAPI_GDI
+#define NO_SHLWAPI_STREAM
+#define NO_SHLWAPI_REG
+#include <shlwapi.h>
+#pragma comment (lib, "user32.lib")
+#pragma comment (lib, "kernel32.lib")
+#pragma comment (lib, "shlwapi.lib")
+#include <stdio.h>
+#include <math.h>
+
+/*
+ * This library is required for x64 builds with _some_ versions of MSVC
+ */
+#if defined(_M_IA64) || defined(_M_AMD64)
+#if _MSC_VER >= 1400 && _MSC_VER < 1500
+#pragma comment(lib, "bufferoverflowU")
+#endif
+#endif
+
+/* ISO hack for dumb VC++ */
+#ifdef _MSC_VER
+#define   snprintf	_snprintf
+#endif
+
+
+
+/* protos */
+
+static int CheckForCompilerFeature(const char *option);
+static int CheckForLinkerFeature(const char *option);
+static int IsIn(const char *string, const char *substring);
+static int SubstituteFile(const char *substs, const char *filename);
+static int QualifyPath(const char *path);
+static const char *GetVersionFromFile(const char *filename, const char *match);
+static DWORD WINAPI ReadFromPipe(LPVOID args);
+
+/* globals */
+
+#define CHUNK	25
+#define STATICBUFFERSIZE    1000
+typedef struct {
+    HANDLE pipe;
+    char buffer[STATICBUFFERSIZE];
+} pipeinfo;
+
+pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'};
+pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'};
+
+/*
+ * exitcodes: 0 == no, 1 == yes, 2 == error
+ */
+
+int
+main(
+    int argc,
+    char *argv[])
+{
+    char msg[300];
+    DWORD dwWritten;
+    int chars;
+
+    /*
+     * Make sure children (cl.exe and link.exe) are kept quiet.
+     */
+
+    SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX);
+
+    /*
+     * Make sure the compiler and linker aren't effected by the outside world.
+     */
+
+    SetEnvironmentVariable("CL", "");
+    SetEnvironmentVariable("LINK", "");
+
+    if (argc > 1 && *argv[1] == '-') {
+	switch (*(argv[1]+1)) {
+	case 'c':
+	    if (argc != 3) {
+		chars = snprintf(msg, sizeof(msg) - 1,
+		        "usage: %s -c <compiler option>\n"
+			"Tests for whether cl.exe supports an option\n"
+			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+			&dwWritten, NULL);
+		return 2;
+	    }
+	    return CheckForCompilerFeature(argv[2]);
+	case 'l':
+	    if (argc != 3) {
+		chars = snprintf(msg, sizeof(msg) - 1,
+	       		"usage: %s -l <linker option>\n"
+			"Tests for whether link.exe supports an option\n"
+			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+			&dwWritten, NULL);
+		return 2;
+	    }
+	    return CheckForLinkerFeature(argv[2]);
+	case 'f':
+	    if (argc == 2) {
+		chars = snprintf(msg, sizeof(msg) - 1,
+			"usage: %s -f <string> <substring>\n"
+			"Find a substring within another\n"
+			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+			&dwWritten, NULL);
+		return 2;
+	    } else if (argc == 3) {
+		/*
+		 * If the string is blank, there is no match.
+		 */
+
+		return 0;
+	    } else {
+		return IsIn(argv[2], argv[3]);
+	    }
+	case 's':
+	    if (argc == 2) {
+		chars = snprintf(msg, sizeof(msg) - 1,
+			"usage: %s -s <substitutions file> <file>\n"
+			"Perform a set of string map type substutitions on a file\n"
+			"exitcodes: 0\n",
+			argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+			&dwWritten, NULL);
+		return 2;
+	    }
+	    return SubstituteFile(argv[2], argv[3]);
+	case 'V':
+	    if (argc != 4) {
+		chars = snprintf(msg, sizeof(msg) - 1,
+		    "usage: %s -V filename matchstring\n"
+		    "Extract a version from a file:\n"
+		    "eg: pkgIndex.tcl \"package ifneeded http\"",
+		    argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+		    &dwWritten, NULL);
+		return 0;
+	    }
+	    printf("%s\n", GetVersionFromFile(argv[2], argv[3]));
+	    return 0;
+	case 'Q':
+	    if (argc != 3) {
+		chars = snprintf(msg, sizeof(msg) - 1,
+		    "usage: %s -Q path\n"
+		    "Emit the fully qualified path\n"
+		    "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+		    &dwWritten, NULL);
+		return 2;
+	    }
+	    return QualifyPath(argv[2]);
+	}
+    }
+    chars = snprintf(msg, sizeof(msg) - 1,
+	    "usage: %s -c|-f|-l|-Q|-s|-V ...\n"
+	    "This is a little helper app to equalize shell differences between WinNT and\n"
+	    "Win9x and get nmake.exe to accomplish its job.\n",
+	    argv[0]);
+    WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+    return 2;
+}
+
+static int
+CheckForCompilerFeature(
+    const char *option)
+{
+    STARTUPINFO si;
+    PROCESS_INFORMATION pi;
+    SECURITY_ATTRIBUTES sa;
+    DWORD threadID;
+    char msg[300];
+    BOOL ok;
+    HANDLE hProcess, h, pipeThreads[2];
+    char cmdline[100];
+
+    hProcess = GetCurrentProcess();
+
+    ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
+    ZeroMemory(&si, sizeof(STARTUPINFO));
+    si.cb = sizeof(STARTUPINFO);
+    si.dwFlags   = STARTF_USESTDHANDLES;
+    si.hStdInput = INVALID_HANDLE_VALUE;
+
+    ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
+    sa.nLength = sizeof(SECURITY_ATTRIBUTES);
+    sa.lpSecurityDescriptor = NULL;
+    sa.bInheritHandle = FALSE;
+
+    /*
+     * Create a non-inheritible pipe.
+     */
+
+    CreatePipe(&Out.pipe, &h, &sa, 0);
+
+    /*
+     * Dupe the write side, make it inheritible, and close the original.
+     */
+
+    DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
+	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+    /*
+     * Same as above, but for the error side.
+     */
+
+    CreatePipe(&Err.pipe, &h, &sa, 0);
+    DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
+	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+    /*
+     * Base command line.
+     */
+
+    lstrcpy(cmdline, "cl.exe -nologo -c -TC -Zs -X -Fp.\\_junk.pch ");
+
+    /*
+     * Append our option for testing
+     */
+
+    lstrcat(cmdline, option);
+
+    /*
+     * Filename to compile, which exists, but is nothing and empty.
+     */
+
+    lstrcat(cmdline, " .\\nul");
+
+    ok = CreateProcess(
+	    NULL,	    /* Module name. */
+	    cmdline,	    /* Command line. */
+	    NULL,	    /* Process handle not inheritable. */
+	    NULL,	    /* Thread handle not inheritable. */
+	    TRUE,	    /* yes, inherit handles. */
+	    DETACHED_PROCESS, /* No console for you. */
+	    NULL,	    /* Use parent's environment block. */
+	    NULL,	    /* Use parent's starting directory. */
+	    &si,	    /* Pointer to STARTUPINFO structure. */
+	    &pi);	    /* Pointer to PROCESS_INFORMATION structure. */
+
+    if (!ok) {
+	DWORD err = GetLastError();
+	int chars = snprintf(msg, sizeof(msg) - 1,
+		"Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
+
+	FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
+		FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
+		(300-chars), 0);
+	WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL);
+	return 2;
+    }
+
+    /*
+     * Close our references to the write handles that have now been inherited.
+     */
+
+    CloseHandle(si.hStdOutput);
+    CloseHandle(si.hStdError);
+
+    WaitForInputIdle(pi.hProcess, 5000);
+    CloseHandle(pi.hThread);
+
+    /*
+     * Start the pipe reader threads.
+     */
+
+    pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
+    pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
+
+    /*
+     * Block waiting for the process to end.
+     */
+
+    WaitForSingleObject(pi.hProcess, INFINITE);
+    CloseHandle(pi.hProcess);
+
+    /*
+     * Wait for our pipe to get done reading, should it be a little slow.
+     */
+
+    WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
+    CloseHandle(pipeThreads[0]);
+    CloseHandle(pipeThreads[1]);
+
+    /*
+     * Look for the commandline warning code in both streams.
+     *  - in MSVC 6 & 7 we get D4002, in MSVC 8 we get D9002.
+     */
+
+    return !(strstr(Out.buffer, "D4002") != NULL
+             || strstr(Err.buffer, "D4002") != NULL
+             || strstr(Out.buffer, "D9002") != NULL
+             || strstr(Err.buffer, "D9002") != NULL
+             || strstr(Out.buffer, "D2021") != NULL
+             || strstr(Err.buffer, "D2021") != NULL);
+}
+
+static int
+CheckForLinkerFeature(
+    const char *option)
+{
+    STARTUPINFO si;
+    PROCESS_INFORMATION pi;
+    SECURITY_ATTRIBUTES sa;
+    DWORD threadID;
+    char msg[300];
+    BOOL ok;
+    HANDLE hProcess, h, pipeThreads[2];
+    char cmdline[100];
+
+    hProcess = GetCurrentProcess();
+
+    ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
+    ZeroMemory(&si, sizeof(STARTUPINFO));
+    si.cb = sizeof(STARTUPINFO);
+    si.dwFlags   = STARTF_USESTDHANDLES;
+    si.hStdInput = INVALID_HANDLE_VALUE;
+
+    ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
+    sa.nLength = sizeof(SECURITY_ATTRIBUTES);
+    sa.lpSecurityDescriptor = NULL;
+    sa.bInheritHandle = TRUE;
+
+    /*
+     * Create a non-inheritible pipe.
+     */
+
+    CreatePipe(&Out.pipe, &h, &sa, 0);
+
+    /*
+     * Dupe the write side, make it inheritible, and close the original.
+     */
+
+    DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
+	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+    /*
+     * Same as above, but for the error side.
+     */
+
+    CreatePipe(&Err.pipe, &h, &sa, 0);
+    DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
+	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+    /*
+     * Base command line.
+     */
+
+    lstrcpy(cmdline, "link.exe -nologo ");
+
+    /*
+     * Append our option for testing.
+     */
+
+    lstrcat(cmdline, option);
+
+    ok = CreateProcess(
+	    NULL,	    /* Module name. */
+	    cmdline,	    /* Command line. */
+	    NULL,	    /* Process handle not inheritable. */
+	    NULL,	    /* Thread handle not inheritable. */
+	    TRUE,	    /* yes, inherit handles. */
+	    DETACHED_PROCESS, /* No console for you. */
+	    NULL,	    /* Use parent's environment block. */
+	    NULL,	    /* Use parent's starting directory. */
+	    &si,	    /* Pointer to STARTUPINFO structure. */
+	    &pi);	    /* Pointer to PROCESS_INFORMATION structure. */
+
+    if (!ok) {
+	DWORD err = GetLastError();
+	int chars = snprintf(msg, sizeof(msg) - 1,
+		"Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
+
+	FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
+		FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
+		(300-chars), 0);
+	WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL);
+	return 2;
+    }
+
+    /*
+     * Close our references to the write handles that have now been inherited.
+     */
+
+    CloseHandle(si.hStdOutput);
+    CloseHandle(si.hStdError);
+
+    WaitForInputIdle(pi.hProcess, 5000);
+    CloseHandle(pi.hThread);
+
+    /*
+     * Start the pipe reader threads.
+     */
+
+    pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
+    pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
+
+    /*
+     * Block waiting for the process to end.
+     */
+
+    WaitForSingleObject(pi.hProcess, INFINITE);
+    CloseHandle(pi.hProcess);
+
+    /*
+     * Wait for our pipe to get done reading, should it be a little slow.
+     */
+
+    WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
+    CloseHandle(pipeThreads[0]);
+    CloseHandle(pipeThreads[1]);
+
+    /*
+     * Look for the commandline warning code in the stderr stream.
+     */
+
+    return !(strstr(Out.buffer, "LNK1117") != NULL ||
+	    strstr(Err.buffer, "LNK1117") != NULL ||
+	    strstr(Out.buffer, "LNK4044") != NULL ||
+	    strstr(Err.buffer, "LNK4044") != NULL);
+}
+
+static DWORD WINAPI
+ReadFromPipe(
+    LPVOID args)
+{
+    pipeinfo *pi = (pipeinfo *) args;
+    char *lastBuf = pi->buffer;
+    DWORD dwRead;
+    BOOL ok;
+
+  again:
+    if (lastBuf - pi->buffer + CHUNK > STATICBUFFERSIZE) {
+	CloseHandle(pi->pipe);
+	return (DWORD)-1;
+    }
+    ok = ReadFile(pi->pipe, lastBuf, CHUNK, &dwRead, 0L);
+    if (!ok || dwRead == 0) {
+	CloseHandle(pi->pipe);
+	return 0;
+    }
+    lastBuf += dwRead;
+    goto again;
+
+    return 0;  /* makes the compiler happy */
+}
+
+static int
+IsIn(
+    const char *string,
+    const char *substring)
+{
+    return (strstr(string, substring) != NULL);
+}
+
+/*
+ * GetVersionFromFile --
+ * 	Looks for a match string in a file and then returns the version
+ * 	following the match where a version is anything acceptable to
+ * 	package provide or package ifneeded.
+ */
+
+static const char *
+GetVersionFromFile(
+    const char *filename,
+    const char *match)
+{
+    size_t cbBuffer = 100;
+    static char szBuffer[100];
+    char *szResult = NULL;
+    FILE *fp = fopen(filename, "rt");
+
+    if (fp != NULL) {
+	/*
+	 * Read data until we see our match string.
+	 */
+
+	while (fgets(szBuffer, cbBuffer, fp) != NULL) {
+	    LPSTR p, q;
+
+	    p = strstr(szBuffer, match);
+	    if (p != NULL) {
+		/*
+		 * Skip to first digit.
+		 */
+
+		while (*p && !isdigit(*p)) {
+		    ++p;
+		}
+
+		/*
+		 * Find ending whitespace.
+		 */
+
+		q = p;
+		while (*q && (isalnum(*q) || *q == '.')) {
+		    ++q;
+		}
+
+		memcpy(szBuffer, p, q - p);
+		szBuffer[q-p] = 0;
+		szResult = szBuffer;
+		break;
+	    }
+	}
+	fclose(fp);
+    }
+    return szResult;
+}
+
+/*
+ * List helpers for the SubstituteFile function
+ */
+
+typedef struct list_item_t {
+    struct list_item_t *nextPtr;
+    char * key;
+    char * value;
+} list_item_t;
+
+/* insert a list item into the list (list may be null) */
+static list_item_t *
+list_insert(list_item_t **listPtrPtr, const char *key, const char *value)
+{
+    list_item_t *itemPtr = malloc(sizeof(list_item_t));
+    if (itemPtr) {
+	itemPtr->key = strdup(key);
+	itemPtr->value = strdup(value);
+	itemPtr->nextPtr = NULL;
+
+	while(*listPtrPtr) {
+	    listPtrPtr = &(*listPtrPtr)->nextPtr;
+	}
+	*listPtrPtr = itemPtr;
+    }
+    return itemPtr;
+}
+
+static void
+list_free(list_item_t **listPtrPtr)
+{
+    list_item_t *tmpPtr, *listPtr = *listPtrPtr;
+    while (listPtr) {
+	tmpPtr = listPtr;
+	listPtr = listPtr->nextPtr;
+	free(tmpPtr->key);
+	free(tmpPtr->value);
+	free(tmpPtr);
+    }
+}
+
+/*
+ * SubstituteFile --
+ *	As windows doesn't provide anything useful like sed and it's unreliable
+ *	to use the tclsh you are building against (consider x-platform builds -
+ *	eg compiling AMD64 target from IX86) we provide a simple substitution
+ *	option here to handle autoconf style substitutions.
+ *	The substitution file is whitespace and line delimited. The file should
+ *	consist of lines matching the regular expression:
+ *	  \s*\S+\s+\S*$
+ *
+ *	Usage is something like:
+ *	  nmakehlp -S << $** > $@
+ *        @PACKAGE_NAME@ $(PACKAGE_NAME)
+ *        @PACKAGE_VERSION@ $(PACKAGE_VERSION)
+ *        <<
+ */
+
+static int
+SubstituteFile(
+    const char *substitutions,
+    const char *filename)
+{
+    size_t cbBuffer = 1024;
+    static char szBuffer[1024], szCopy[1024];
+    char *szResult = NULL;
+    list_item_t *substPtr = NULL;
+    FILE *fp, *sp;
+
+    fp = fopen(filename, "rt");
+    if (fp != NULL) {
+
+	/*
+	 * Build a list of substutitions from the first filename
+	 */
+
+	sp = fopen(substitutions, "rt");
+	if (sp != NULL) {
+	    while (fgets(szBuffer, cbBuffer, sp) != NULL) {
+		char *ks, *ke, *vs, *ve;
+		ks = szBuffer;
+		while (ks && *ks && isspace(*ks)) ++ks;
+		ke = ks;
+		while (ke && *ke && !isspace(*ke)) ++ke;
+		vs = ke;
+		while (vs && *vs && isspace(*vs)) ++vs;
+		ve = vs;
+		while (ve && *ve && !(*ve == '\r' || *ve == '\n')) ++ve;
+		*ke = 0, *ve = 0;
+		list_insert(&substPtr, ks, vs);
+	    }
+	    fclose(sp);
+	}
+
+	/* debug: dump the list */
+#ifdef _DEBUG
+	{
+	    int n = 0;
+	    list_item_t *p = NULL;
+	    for (p = substPtr; p != NULL; p = p->nextPtr, ++n) {
+		fprintf(stderr, "% 3d '%s' => '%s'\n", n, p->key, p->value);
+	    }
+	}
+#endif
+	
+	/*
+	 * Run the substitutions over each line of the input
+	 */
+	
+	while (fgets(szBuffer, cbBuffer, fp) != NULL) {
+	    list_item_t *p = NULL;
+	    for (p = substPtr; p != NULL; p = p->nextPtr) {
+		char *m = strstr(szBuffer, p->key);
+		if (m) {
+		    char *cp, *op, *sp;
+		    cp = szCopy;
+		    op = szBuffer;
+		    while (op != m) *cp++ = *op++;
+		    sp = p->value;
+		    while (sp && *sp) *cp++ = *sp++;
+		    op += strlen(p->key);
+		    while (*op) *cp++ = *op++;
+		    *cp = 0;
+		    memcpy(szBuffer, szCopy, sizeof(szCopy));
+		}
+	    }
+	    printf(szBuffer);
+	}
+	
+	list_free(&substPtr);
+    }
+    fclose(fp);
+    return 0;
+}
+
+/*
+ * QualifyPath --
+ *
+ *	This composes the current working directory with a provided path
+ *	and returns the fully qualified and normalized path.
+ *	Mostly needed to setup paths for testing.
+ */
+
+static int
+QualifyPath(
+    const char *szPath)
+{
+    char szCwd[MAX_PATH + 1];
+    char szTmp[MAX_PATH + 1];
+    char *p;
+    GetCurrentDirectory(MAX_PATH, szCwd);
+    while ((p = strchr(szPath, '/')) && *p)
+	*p = '\\';
+    PathCombine(szTmp, szCwd, szPath);
+    PathCanonicalize(szCwd, szTmp);
+    printf("%s\n", szCwd);
+    return 0;
+}
+
+/*
+ * Local variables:
+ *   mode: c
+ *   c-basic-offset: 4
+ *   fill-column: 78
+ *   indent-tabs-mode: t
+ *   tab-width: 8
+ * End:
+ */
diff --git a/autoconf/tea/win/rules.vc b/autoconf/tea/win/rules.vc
new file mode 100644
index 0000000..9947105
--- /dev/null
+++ b/autoconf/tea/win/rules.vc
@@ -0,0 +1,711 @@
+#------------------------------------------------------------------------------
+# rules.vc --
+#
+#	Microsoft Visual C++ makefile include for decoding the commandline
+#	macros.  This file does not need editing to build Tcl.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Copyright (c) 2001-2003 David Gravereaux.
+# Copyright (c) 2003-2008 Patrick Thoyts
+#------------------------------------------------------------------------------
+
+!ifndef _RULES_VC
+_RULES_VC = 1
+
+cc32		= $(CC)   # built-in default.
+link32		= link
+lib32		= lib
+rc32		= $(RC)   # built-in default.
+
+!ifndef INSTALLDIR
+### Assume the normal default.
+_INSTALLDIR	= C:\Program Files\Tcl
+!else
+### Fix the path separators.
+_INSTALLDIR	= $(INSTALLDIR:/=\)
+!endif
+
+#----------------------------------------------------------
+# Set the proper copy method to avoid overwrite questions
+# to the user when copying files and selecting the right
+# "delete all" method.
+#----------------------------------------------------------
+
+!if "$(OS)" == "Windows_NT"
+RMDIR	= rmdir /S /Q
+ERRNULL  = 2>NUL
+!if ![ver | find "4.0" > nul]
+CPY	= echo y | xcopy /i >NUL
+COPY	= copy >NUL
+!else
+CPY	= xcopy /i /y >NUL
+COPY	= copy /y >NUL
+!endif
+!else # "$(OS)" != "Windows_NT"
+CPY	= xcopy /i >_JUNK.OUT # On Win98 NUL does not work here.
+COPY	= copy >_JUNK.OUT # On Win98 NUL does not work here.
+RMDIR	= deltree /Y
+NULL    = \NUL # Used in testing directory existence
+ERRNULL = >NUL # Win9x shell cannot redirect stderr
+!endif
+MKDIR   = mkdir
+
+#------------------------------------------------------------------------------
+# Determine the host and target architectures and compiler version.
+#------------------------------------------------------------------------------
+
+_HASH=^#
+_VC_MANIFEST_EMBED_EXE=
+_VC_MANIFEST_EMBED_DLL=
+VCVER=0
+!if ![echo VCVERSION=_MSC_VER > vercl.x] \
+    && ![echo $(_HASH)if defined(_M_IX86) >> vercl.x] \
+    && ![echo ARCH=IX86 >> vercl.x] \
+    && ![echo $(_HASH)elif defined(_M_AMD64) >> vercl.x] \
+    && ![echo ARCH=AMD64 >> vercl.x] \
+    && ![echo $(_HASH)endif >> vercl.x] \
+    && ![cl -nologo -TC -P vercl.x $(ERRNULL)]
+!include vercl.i
+!if ![echo VCVER= ^\> vercl.vc] \
+    && ![set /a $(VCVERSION) / 100 - 6 >> vercl.vc]
+!include vercl.vc
+!endif
+!endif
+!if ![del $(ERRNUL) /q/f vercl.x vercl.i vercl.vc]
+!endif
+
+!if ![reg query HKLM\Hardware\Description\System\CentralProcessor\0 /v Identifier | findstr /i x86]
+NATIVE_ARCH=IX86
+!else
+NATIVE_ARCH=AMD64
+!endif
+
+# Since MSVC8 we must deal with manifest resources.
+!if $(VCVERSION) >= 1400
+_VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1
+_VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2
+!endif
+
+!ifndef MACHINE
+MACHINE=$(ARCH)
+!endif
+
+!ifndef CFG_ENCODING
+CFG_ENCODING	= \"cp1252\"
+!endif
+
+!message ===============================================================================
+
+#----------------------------------------------------------
+# build the helper app we need to overcome nmake's limiting
+# environment.
+#----------------------------------------------------------
+
+!if !exist(nmakehlp.exe)
+!if [$(cc32) -nologo nmakehlp.c -link -subsystem:console > nul]
+!endif
+!endif
+
+#----------------------------------------------------------
+# Test for compiler features
+#----------------------------------------------------------
+
+### test for optimizations
+!if [nmakehlp -c -Ot]
+!message *** Compiler has 'Optimizations'
+OPTIMIZING	= 1
+!else
+!message *** Compiler does not have 'Optimizations'
+OPTIMIZING	= 0
+!endif
+
+OPTIMIZATIONS   =
+
+!if [nmakehlp -c -Ot]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -Ot
+!endif
+
+!if [nmakehlp -c -Oi]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -Oi
+!endif
+
+!if [nmakehlp -c -Op]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -Op
+!endif
+
+!if [nmakehlp -c -fp:strict]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -fp:strict
+!endif
+
+!if [nmakehlp -c -Gs]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -Gs
+!endif
+
+!if [nmakehlp -c -GS]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -GS
+!endif
+
+!if [nmakehlp -c -GL]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -GL
+!endif
+
+DEBUGFLAGS     =
+
+!if [nmakehlp -c -RTC1]
+DEBUGFLAGS     = $(DEBUGFLAGS) -RTC1
+!elseif [nmakehlp -c -GZ]
+DEBUGFLAGS     = $(DEBUGFLAGS) -GZ
+!endif
+
+COMPILERFLAGS  =-W3 -DUNICODE -D_UNICODE
+
+# In v13 -GL and -YX are incompatible.
+!if [nmakehlp -c -YX]
+!if ![nmakehlp -c -GL]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -YX
+!endif
+!endif
+
+!if "$(MACHINE)" == "IX86"
+### test for pentium errata
+!if [nmakehlp -c -QI0f]
+!message *** Compiler has 'Pentium 0x0f fix'
+COMPILERFLAGS  = $(COMPILERFLAGS) -QI0f
+!else
+!message *** Compiler does not have 'Pentium 0x0f fix'
+!endif
+!endif
+
+!if "$(MACHINE)" == "IA64"
+### test for Itanium errata
+!if [nmakehlp -c -QIA64_Bx]
+!message *** Compiler has 'B-stepping errata workarounds'
+COMPILERFLAGS   = $(COMPILERFLAGS) -QIA64_Bx
+!else
+!message *** Compiler does not have 'B-stepping errata workarounds'
+!endif
+!endif
+
+!if "$(MACHINE)" == "IX86"
+### test for -align:4096, when align:512 will do.
+!if [nmakehlp -l -opt:nowin98]
+!message *** Linker has 'Win98 alignment problem'
+ALIGN98_HACK	= 1
+!else
+!message *** Linker does not have 'Win98 alignment problem'
+ALIGN98_HACK	= 0
+!endif
+!else
+ALIGN98_HACK	= 0
+!endif
+
+LINKERFLAGS     =
+
+!if [nmakehlp -l -ltcg]
+LINKERFLAGS     =-ltcg
+!endif
+
+#----------------------------------------------------------
+# Decode the options requested.
+#----------------------------------------------------------
+
+!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"]
+STATIC_BUILD	= 0
+TCL_THREADS	= 1
+DEBUG		= 0
+SYMBOLS		= 0
+PROFILE		= 0
+PGO		= 0
+MSVCRT		= 0
+LOIMPACT	= 0
+TCL_USE_STATIC_PACKAGES	= 0
+USE_THREAD_ALLOC = 1
+UNCHECKED	= 0
+!else
+!if [nmakehlp -f $(OPTS) "static"]
+!message *** Doing static
+STATIC_BUILD	= 1
+!else
+STATIC_BUILD	= 0
+!endif
+!if [nmakehlp -f $(OPTS) "msvcrt"]
+!message *** Doing msvcrt
+MSVCRT		= 1
+!else
+MSVCRT		= 0
+!endif
+!if [nmakehlp -f $(OPTS) "staticpkg"]
+!message *** Doing staticpkg
+TCL_USE_STATIC_PACKAGES	= 1
+!else
+TCL_USE_STATIC_PACKAGES	= 0
+!endif
+!if [nmakehlp -f $(OPTS) "nothreads"]
+!message *** Compile explicitly for non-threaded tcl
+TCL_THREADS	= 0
+!else
+TCL_THREADS	= 1
+USE_THREAD_ALLOC= 1
+!endif
+!if [nmakehlp -f $(OPTS) "symbols"]
+!message *** Doing symbols
+DEBUG		= 1
+!else
+DEBUG		= 0
+!endif
+!if [nmakehlp -f $(OPTS) "pdbs"]
+!message *** Doing pdbs
+SYMBOLS		= 1
+!else
+SYMBOLS		= 0
+!endif
+!if [nmakehlp -f $(OPTS) "profile"]
+!message *** Doing profile
+PROFILE		= 1
+!else
+PROFILE		= 0
+!endif
+!if [nmakehlp -f $(OPTS) "pgi"]
+!message *** Doing profile guided optimization instrumentation
+PGO		= 1
+!elseif [nmakehlp -f $(OPTS) "pgo"]
+!message *** Doing profile guided optimization
+PGO		= 2
+!else
+PGO		= 0
+!endif
+!if [nmakehlp -f $(OPTS) "loimpact"]
+!message *** Doing loimpact
+LOIMPACT	= 1
+!else
+LOIMPACT	= 0
+!endif
+!if [nmakehlp -f $(OPTS) "thrdalloc"]
+!message *** Doing thrdalloc
+USE_THREAD_ALLOC = 1
+!endif
+!if [nmakehlp -f $(OPTS) "tclalloc"]
+!message *** Doing tclalloc
+USE_THREAD_ALLOC = 0
+!endif
+!if [nmakehlp -f $(OPTS) "unchecked"]
+!message *** Doing unchecked
+UNCHECKED = 1
+!else
+UNCHECKED = 0
+!endif
+!endif
+
+
+!if !$(STATIC_BUILD)
+# Make sure we don't build overly fat DLLs.
+MSVCRT		= 1
+# We shouldn't statically put the extensions inside the shell when dynamic.
+TCL_USE_STATIC_PACKAGES = 0
+!endif
+
+
+#----------------------------------------------------------
+# Figure-out how to name our intermediate and output directories.
+# We wouldn't want different builds to use the same .obj files
+# by accident.
+#----------------------------------------------------------
+
+#----------------------------------------
+# Naming convention:
+#   t = full thread support.
+#   s = static library (as opposed to an
+#	import library)
+#   g = linked to the debug enabled C
+#	run-time.
+#   x = special static build when it
+#	links to the dynamic C run-time.
+#----------------------------------------
+SUFX	    = tsgx
+
+!if $(DEBUG)
+BUILDDIRTOP = Debug
+!else
+BUILDDIRTOP = Release
+!endif
+
+!if "$(MACHINE)" != "IX86"
+BUILDDIRTOP =$(BUILDDIRTOP)_$(MACHINE)
+!endif
+!if $(VCVER) > 6
+BUILDDIRTOP =$(BUILDDIRTOP)_VC$(VCVER)
+!endif
+
+!if !$(DEBUG) || $(DEBUG) && $(UNCHECKED)
+SUFX	    = $(SUFX:g=)
+!endif
+
+TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX
+
+!if !$(STATIC_BUILD)
+TMP_DIRFULL = $(TMP_DIRFULL:Static=)
+SUFX	    = $(SUFX:s=)
+EXT	    = dll
+!if $(MSVCRT)
+TMP_DIRFULL = $(TMP_DIRFULL:X=)
+SUFX	    = $(SUFX:x=)
+!endif
+!else
+TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=)
+EXT	    = lib
+!if !$(MSVCRT)
+TMP_DIRFULL = $(TMP_DIRFULL:X=)
+SUFX	    = $(SUFX:x=)
+!endif
+!endif
+
+!if !$(TCL_THREADS)
+TMP_DIRFULL = $(TMP_DIRFULL:Threaded=)
+SUFX	    = $(SUFX:t=)
+!endif
+
+!ifndef TMP_DIR
+TMP_DIR	    = $(TMP_DIRFULL)
+!ifndef OUT_DIR
+OUT_DIR	    = .\$(BUILDDIRTOP)
+!endif
+!else
+!ifndef OUT_DIR
+OUT_DIR	    = $(TMP_DIR)
+!endif
+!endif
+
+
+#----------------------------------------------------------
+# Decode the statistics requested.
+#----------------------------------------------------------
+
+!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"]
+TCL_MEM_DEBUG	    = 0
+TCL_COMPILE_DEBUG   = 0
+!else
+!if [nmakehlp -f $(STATS) "memdbg"]
+!message *** Doing memdbg
+TCL_MEM_DEBUG	    = 1
+!else
+TCL_MEM_DEBUG	    = 0
+!endif
+!if [nmakehlp -f $(STATS) "compdbg"]
+!message *** Doing compdbg
+TCL_COMPILE_DEBUG   = 1
+!else
+TCL_COMPILE_DEBUG   = 0
+!endif
+!endif
+
+
+#----------------------------------------------------------
+# Decode the checks requested.
+#----------------------------------------------------------
+
+!if "$(CHECKS)" == "" || [nmakehlp -f "$(CHECKS)" "none"]
+TCL_NO_DEPRECATED	    = 0
+WARNINGS		    = -W3
+!else
+!if [nmakehlp -f $(CHECKS) "nodep"]
+!message *** Doing nodep check
+TCL_NO_DEPRECATED	    = 1
+!else
+TCL_NO_DEPRECATED	    = 0
+!endif
+!if [nmakehlp -f $(CHECKS) "fullwarn"]
+!message *** Doing full warnings check
+WARNINGS		    = -W4
+!if [nmakehlp -l -warn:3]
+LINKERFLAGS		    = $(LINKERFLAGS) -warn:3
+!endif
+!else
+WARNINGS		    = -W3
+!endif
+!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64]
+!message *** Doing 64bit portability warnings
+WARNINGS		    = $(WARNINGS) -Wp64
+!endif
+!endif
+
+!if $(PGO) > 1
+!if [nmakehlp -l -ltcg:pgoptimize]
+LINKERFLAGS	= $(LINKERFLAGS:-ltcg=) -ltcg:pgoptimize
+!else
+MSG=^
+This compiler does not support profile guided optimization.
+!error $(MSG)
+!endif
+!elseif $(PGO) > 0
+!if [nmakehlp -l -ltcg:pginstrument]
+LINKERFLAGS	= $(LINKERFLAGS:-ltcg=) -ltcg:pginstrument
+!else
+MSG=^
+This compiler does not support profile guided optimization.
+!error $(MSG)
+!endif
+!endif
+
+#----------------------------------------------------------
+# Set our defines now armed with our options.
+#----------------------------------------------------------
+
+OPTDEFINES	= -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) -DSTDC_HEADERS
+
+!if $(TCL_MEM_DEBUG)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_MEM_DEBUG
+!endif
+!if $(TCL_COMPILE_DEBUG)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
+!endif
+!if $(TCL_THREADS)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_THREADS=1
+!if $(USE_THREAD_ALLOC)
+OPTDEFINES	= $(OPTDEFINES) -DUSE_THREAD_ALLOC=1
+!endif
+!endif
+!if $(STATIC_BUILD)
+OPTDEFINES	= $(OPTDEFINES) -DSTATIC_BUILD
+!endif
+!if $(TCL_NO_DEPRECATED)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_NO_DEPRECATED
+!endif
+
+!if !$(DEBUG)
+OPTDEFINES	= $(OPTDEFINES) -DNDEBUG
+!if $(OPTIMIZING)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_OPTIMIZED
+!endif
+!endif
+!if $(PROFILE)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_PROFILED
+!endif
+!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
+OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_DO64BIT
+!endif
+!if $(VCVERSION) < 1300
+OPTDEFINES	= $(OPTDEFINES) -DNO_STRTOI64
+!endif
+
+#----------------------------------------------------------
+# Locate the Tcl headers to build against
+#----------------------------------------------------------
+
+!if "$(PROJECT)" == "tcl"
+
+_TCL_H          = ..\generic\tcl.h
+
+!else
+
+# If INSTALLDIR set to tcl root dir then reset to the lib dir.
+!if exist("$(_INSTALLDIR)\include\tcl.h")
+_INSTALLDIR=$(_INSTALLDIR)\lib
+!endif
+
+!if !defined(TCLDIR)
+!if exist("$(_INSTALLDIR)\..\include\tcl.h")
+TCLINSTALL	= 1
+_TCLDIR		= $(_INSTALLDIR)\..
+_TCL_H          = $(_INSTALLDIR)\..\include\tcl.h
+TCLDIR          = $(_INSTALLDIR)\..
+!else
+MSG=^
+Failed to find tcl.h.  Set the TCLDIR macro.
+!error $(MSG)
+!endif
+!else
+_TCLDIR	= $(TCLDIR:/=\)
+!if exist("$(_TCLDIR)\include\tcl.h")
+TCLINSTALL	= 1
+_TCL_H          = $(_TCLDIR)\include\tcl.h
+!elseif exist("$(_TCLDIR)\generic\tcl.h")
+TCLINSTALL	= 0
+_TCL_H          = $(_TCLDIR)\generic\tcl.h
+!else
+MSG =^
+Failed to find tcl.h.  The TCLDIR macro does not appear correct.
+!error $(MSG)
+!endif
+!endif
+!endif
+
+#--------------------------------------------------------------
+# Extract various version numbers from tcl headers
+# The generated file is then included in the makefile.
+#--------------------------------------------------------------
+
+!if [echo REM = This file is generated from rules.vc > versions.vc]
+!endif
+!if [echo TCL_MAJOR_VERSION = \>> versions.vc] \
+   && [nmakehlp -V "$(_TCL_H)" TCL_MAJOR_VERSION >> versions.vc]
+!endif
+!if [echo TCL_MINOR_VERSION = \>> versions.vc] \
+   && [nmakehlp -V "$(_TCL_H)" TCL_MINOR_VERSION >> versions.vc]
+!endif
+!if [echo TCL_PATCH_LEVEL = \>> versions.vc] \
+   && [nmakehlp -V "$(_TCL_H)" TCL_PATCH_LEVEL >> versions.vc]
+!endif
+
+# If building the tcl core then we need additional package versions
+!if "$(PROJECT)" == "tcl"
+!if [echo PKG_HTTP_VER = \>> versions.vc] \
+   && [nmakehlp -V ..\library\http\pkgIndex.tcl http >> versions.vc]
+!endif
+!if [echo PKG_TCLTEST_VER = \>> versions.vc] \
+   && [nmakehlp -V ..\library\tcltest\pkgIndex.tcl tcltest >> versions.vc]
+!endif
+!if [echo PKG_MSGCAT_VER = \>> versions.vc] \
+   && [nmakehlp -V ..\library\msgcat\pkgIndex.tcl msgcat >> versions.vc]
+!endif
+!if [echo PKG_PLATFORM_VER = \>> versions.vc] \
+   && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform " >> versions.vc]
+!endif
+!if [echo PKG_SHELL_VER = \>> versions.vc] \
+   && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform::shell" >> versions.vc]
+!endif
+!if [echo PKG_DDE_VER = \>> versions.vc] \
+   && [nmakehlp -V ..\library\dde\pkgIndex.tcl "dde " >> versions.vc]
+!endif
+!if [echo PKG_REG_VER =\>> versions.vc] \
+   && [nmakehlp -V ..\library\reg\pkgIndex.tcl registry >> versions.vc]
+!endif
+!endif
+
+!include versions.vc
+
+#--------------------------------------------------------------
+# Setup tcl version dependent stuff headers
+#--------------------------------------------------------------
+
+!if "$(PROJECT)" != "tcl"
+
+TCL_VERSION	= $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION)
+
+!if $(TCL_VERSION) < 81
+TCL_DOES_STUBS	= 0
+!else
+TCL_DOES_STUBS	= 1
+!endif
+
+!if $(TCLINSTALL)
+TCLSH		= "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe"
+!if !exist($(TCLSH)) && $(TCL_THREADS)
+TCLSH           = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe"
+!endif
+TCLSTUBLIB	= "$(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib"
+TCLIMPLIB	= "$(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib"
+TCL_LIBRARY	= $(_TCLDIR)\lib
+TCLREGLIB	= "$(_TCLDIR)\lib\tclreg13$(SUFX:t=).lib"
+TCLDDELIB	= "$(_TCLDIR)\lib\tcldde14$(SUFX:t=).lib"
+COFFBASE	= \must\have\tcl\sources\to\build\this\target
+TCLTOOLSDIR	= \must\have\tcl\sources\to\build\this\target
+TCL_INCLUDES    = -I"$(_TCLDIR)\include"
+!else
+TCLSH		= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe"
+!if !exist($(TCLSH)) && $(TCL_THREADS)
+TCLSH		= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe"
+!endif
+TCLSTUBLIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib"
+TCLIMPLIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib"
+TCL_LIBRARY	= $(_TCLDIR)\library
+TCLREGLIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclreg13$(SUFX:t=).lib"
+TCLDDELIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcldde14$(SUFX:t=).lib"
+COFFBASE	= "$(_TCLDIR)\win\coffbase.txt"
+TCLTOOLSDIR	= $(_TCLDIR)\tools
+TCL_INCLUDES	= -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win"
+!endif
+
+!endif
+
+#-------------------------------------------------------------------------
+# Locate the Tk headers to build against
+#-------------------------------------------------------------------------
+
+!if "$(PROJECT)" == "tk"
+_TK_H          = ..\generic\tk.h
+_INSTALLDIR    = $(_INSTALLDIR)\..
+!endif
+
+!ifdef PROJECT_REQUIRES_TK
+!if !defined(TKDIR)
+!if exist("$(_INSTALLDIR)\..\include\tk.h")
+TKINSTALL      = 1
+_TKDIR         = $(_INSTALLDIR)\..
+_TK_H          = $(_TKDIR)\include\tk.h
+TKDIR          = $(_TKDIR)
+!elseif exist("$(_TCLDIR)\include\tk.h")
+TKINSTALL      = 1
+_TKDIR         = $(_TCLDIR)
+_TK_H          = $(_TKDIR)\include\tk.h
+TKDIR          = $(_TKDIR)
+!endif
+!else
+_TKDIR = $(TKDIR:/=\)
+!if exist("$(_TKDIR)\include\tk.h")
+TKINSTALL      = 1
+_TK_H          = $(_TKDIR)\include\tk.h
+!elseif exist("$(_TKDIR)\generic\tk.h")
+TKINSTALL      = 0
+_TK_H          = $(_TKDIR)\generic\tk.h
+!else
+MSG =^
+Failed to find tk.h. The TKDIR macro does not appear correct.
+!error $(MSG)
+!endif
+!endif
+!endif
+
+#-------------------------------------------------------------------------
+# Extract Tk version numbers
+#-------------------------------------------------------------------------
+
+!if defined(PROJECT_REQUIRES_TK) || "$(PROJECT)" == "tk"
+
+!if [echo TK_MAJOR_VERSION = \>> versions.vc] \
+   && [nmakehlp -V $(_TK_H) TK_MAJOR_VERSION >> versions.vc]
+!endif
+!if [echo TK_MINOR_VERSION = \>> versions.vc] \
+   && [nmakehlp -V $(_TK_H) TK_MINOR_VERSION >> versions.vc]
+!endif
+!if [echo TK_PATCH_LEVEL = \>> versions.vc] \
+   && [nmakehlp -V $(_TK_H) TK_PATCH_LEVEL >> versions.vc]
+!endif
+
+!include versions.vc
+
+TK_DOTVERSION	= $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION)
+TK_VERSION	= $(TK_MAJOR_VERSION)$(TK_MINOR_VERSION)
+
+!if "$(PROJECT)" != "tk"
+!if $(TKINSTALL)
+WISH		= "$(_TKDIR)\bin\wish$(TK_VERSION)$(SUFX).exe"
+TKSTUBLIB	= "$(_TKDIR)\lib\tkstub$(TK_VERSION).lib"
+TKIMPLIB	= "$(_TKDIR)\lib\tk$(TK_VERSION)$(SUFX).lib"
+TK_INCLUDES     = -I"$(_TKDIR)\include"
+!else
+WISH		= "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe"
+TKSTUBLIB	= "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib"
+TKIMPLIB	= "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib"
+TK_INCLUDES     = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib"
+!endif
+!endif
+
+!endif
+
+#----------------------------------------------------------
+# Display stats being used.
+#----------------------------------------------------------
+
+!message *** Intermediate directory will be '$(TMP_DIR)'
+!message *** Output directory will be '$(OUT_DIR)'
+!message *** Suffix for binaries will be '$(SUFX)'
+!message *** Optional defines are '$(OPTDEFINES)'
+!message *** Compiler version $(VCVER). Target machine is $(MACHINE)
+!message *** Host architecture is $(NATIVE_ARCH)
+!message *** Compiler options '$(COMPILERFLAGS) $(OPTIMIZATIONS) $(DEBUGFLAGS) $(WARNINGS)'
+!message *** Link options '$(LINKERFLAGS)'
+
+!endif
+