summaryrefslogtreecommitdiff
path: root/templates
diff options
context:
space:
mode:
Diffstat (limited to 'templates')
-rw-r--r--templates/command.erb5
-rw-r--r--templates/host.erb10
-rw-r--r--templates/nagioscfg.erb962
-rw-r--r--templates/service.erb7
4 files changed, 0 insertions, 984 deletions
diff --git a/templates/command.erb b/templates/command.erb
deleted file mode 100644
index aeaa8c9..0000000
--- a/templates/command.erb
+++ /dev/null
@@ -1,5 +0,0 @@
-define command{
- command_name <%= name %>
- command_line <%= command_line %>
- }
-
diff --git a/templates/host.erb b/templates/host.erb
deleted file mode 100644
index 3598576..0000000
--- a/templates/host.erb
+++ /dev/null
@@ -1,10 +0,0 @@
-define host{
- use generic-host ; Name of host template to use
- hostgroups ping-servers
- host_name <%= name %>
- alias <%= short_alias %>
- address <%= ip %>
- <% if ! (/^(none|)$/i =~ nagios_parent) then %> parents <%= nagios_parent %> <% end %>
-}
-
-
diff --git a/templates/nagioscfg.erb b/templates/nagioscfg.erb
deleted file mode 100644
index 2618a1c..0000000
--- a/templates/nagioscfg.erb
+++ /dev/null
@@ -1,962 +0,0 @@
-##############################################################################
-#
-# NAGIOS.CFG - Sample Main Config File for Nagios 2.9
-#
-# Read the documentation for more information on this configuration
-# file. I've provided some comments here, but things may not be so
-# clear without further explanation.
-#
-# Last Modified: 12-21-2006
-#
-##############################################################################
-
-
-# LOG FILE
-# This is the main log file where service and host events are logged
-# for historical purposes. This should be the first option specified
-# in the config file!!!
-
-log_file=/var/log/nagios/nagios.log
-
-
-
-# OBJECT CONFIGURATION FILE(S)
-# This is the configuration file in which you define hosts, host
-# groups, contacts, contact groups, services, etc. I guess it would
-# be better called an object definition file, but for historical
-# reasons it isn't. You can split object definitions into several
-# different config files by using multiple cfg_file statements here.
-# Nagios will read and process all the config files you define.
-# This can be very useful if you want to keep command definitions
-# separate from host and contact definitions...
-
-# Command definitions
-cfg_file=/etc/nagios/commands.cfg
-
-# Host and service definitions for monitoring this machine
-#cfg_file=/etc/nagios/localhost.cfg
-
-
-# You can split other types of object definitions across several
-# config files if you wish (as done here), or keep them all in a
-# single config file.
-
-#cfg_file=/etc/nagios/contactgroups.cfg
-#cfg_file=/etc/nagios/contacts.cfg
-#cfg_file=/etc/nagios/hostgroups.cfg
-#cfg_file=/etc/nagios/hosts.cfg
-#cfg_file=/etc/nagios/services.cfg
-#cfg_file=/etc/nagios/timeperiods.cfg
-#cfg_file=/etc/nagios/misccommands.cfg
-#cfg_file=/etc/nagios/checkcommands.cfg
-
-
-# Extended host/service info definitions are now stored along with
-# other object definitions:
-#cfg_file=/etc/nagios/hostextinfo.cfg
-#cfg_file=/etc/nagios/serviceextinfo.cfg
-
-# You can also tell Nagios to process all config files (with a .cfg
-# extension) in a particular directory by using the cfg_dir
-# directive as shown below:
-
-cfg_dir=<%= nagios_cfgdir %>/hosts.d
-
-# OBJECT CACHE FILE
-# This option determines where object definitions are cached when
-# Nagios starts/restarts. The CGIs read object definitions from
-# this cache file (rather than looking at the object config files
-# directly) in order to prevent inconsistencies that can occur
-# when the config files are modified after Nagios starts.
-
-object_cache_file=/var/log/nagios/objects.cache
-
-
-# RESOURCE FILE
-# This is an optional resource file that contains $USERx$ macro
-# definitions. Multiple resource files can be specified by using
-# multiple resource_file definitions. The CGIs will not attempt to
-# read the contents of resource files, so information that is
-# considered to be sensitive (usernames, passwords, etc) can be
-# defined as macros in this file and restrictive permissions (600)
-# can be placed on this file.
-
-resource_file=/etc/nagios/private/resource.cfg
-
-
-
-# STATUS FILE
-# This is where the current status of all monitored services and
-# hosts is stored. Its contents are read and processed by the CGIs.
-# The contents of the status file are deleted every time Nagios
-# restarts.
-
-status_file=/var/log/nagios/status.dat
-
-
-
-# NAGIOS USER
-# This determines the effective user that Nagios should run as.
-# You can either supply a username or a UID.
-
-nagios_user=nagios
-
-
-
-# NAGIOS GROUP
-# This determines the effective group that Nagios should run as.
-# You can either supply a group name or a GID.
-
-nagios_group=nagios
-
-
-
-# EXTERNAL COMMAND OPTION
-# This option allows you to specify whether or not Nagios should check
-# for external commands (in the command file defined below). By default
-# Nagios will *not* check for external commands, just to be on the
-# cautious side. If you want to be able to use the CGI command interface
-# you will have to enable this. Setting this value to 0 disables command
-# checking (the default), other values enable it.
-
-check_external_commands=1
-
-
-
-# EXTERNAL COMMAND CHECK INTERVAL
-# This is the interval at which Nagios should check for external commands.
-# This value works of the interval_length you specify later. If you leave
-# that at its default value of 60 (seconds), a value of 1 here will cause
-# Nagios to check for external commands every minute. If you specify a
-# number followed by an "s" (i.e. 15s), this will be interpreted to mean
-# actual seconds rather than a multiple of the interval_length variable.
-# Note: In addition to reading the external command file at regularly
-# scheduled intervals, Nagios will also check for external commands after
-# event handlers are executed.
-# NOTE: Setting this value to -1 causes Nagios to check the external
-# command file as often as possible.
-
-#command_check_interval=15s
-command_check_interval=1
-
-
-
-# EXTERNAL COMMAND FILE
-# This is the file that Nagios checks for external command requests.
-# It is also where the command CGI will write commands that are submitted
-# by users, so it must be writeable by the user that the web server
-# is running as (usually 'nobody'). Permissions should be set at the
-# directory level instead of on the file, as the file is deleted every
-# time its contents are processed.
-
-command_file=/var/spool/nagios/cmd/nagios.cmd
-
-
-
-# EXTERNAL COMMAND BUFFER SLOTS
-# This settings is used to tweak the number of items or "slots" that
-# the Nagios daemon should allocate to the buffer that holds incoming
-# external commands before they are processed. As external commands
-# are processed by the daemon, they are removed from the buffer.
-
-external_command_buffer_slots=4096
-
-
-
-# COMMENT FILE
-# This is the file that Nagios will use for storing host and service
-# comments.
-
-comment_file=/var/log/nagios/comments.dat
-
-
-
-# DOWNTIME FILE
-# This is the file that Nagios will use for storing host and service
-# downtime data.
-
-downtime_file=/var/log/nagios/downtime.dat
-
-
-
-# LOCK FILE
-# This is the lockfile that Nagios will use to store its PID number
-# in when it is running in daemon mode.
-
-lock_file=/var/run/nagios.pid
-
-
-
-# TEMP FILE
-# This is a temporary file that is used as scratch space when Nagios
-# updates the status log, cleans the comment file, etc. This file
-# is created, used, and deleted throughout the time that Nagios is
-# running.
-
-temp_file=/var/log/nagios/nagios.tmp
-
-
-
-# EVENT BROKER OPTIONS
-# Controls what (if any) data gets sent to the event broker.
-# Values: 0 = Broker nothing
-# -1 = Broker everything
-# <other> = See documentation
-
-event_broker_options=-1
-
-
-
-# EVENT BROKER MODULE(S)
-# This directive is used to specify an event broker module that should
-# by loaded by Nagios at startup. Use multiple directives if you want
-# to load more than one module. Arguments that should be passed to
-# the module at startup are seperated from the module path by a space.
-#
-# Example:
-#
-# broker_module=<modulepath> [moduleargs]
-
-#broker_module=/somewhere/module1.o
-#broker_module=/somewhere/module2.o arg1 arg2=3 debug=0
-
-
-
-
-# LOG ROTATION METHOD
-# This is the log rotation method that Nagios should use to rotate
-# the main log file. Values are as follows..
-# n = None - don't rotate the log
-# h = Hourly rotation (top of the hour)
-# d = Daily rotation (midnight every day)
-# w = Weekly rotation (midnight on Saturday evening)
-# m = Monthly rotation (midnight last day of month)
-
-log_rotation_method=d
-
-
-
-# LOG ARCHIVE PATH
-# This is the directory where archived (rotated) log files should be
-# placed (assuming you've chosen to do log rotation).
-
-log_archive_path=/var/log/nagios/archives
-
-
-
-# LOGGING OPTIONS
-# If you want messages logged to the syslog facility, as well as the
-# NetAlarm log file set this option to 1. If not, set it to 0.
-
-use_syslog=1
-
-
-
-# NOTIFICATION LOGGING OPTION
-# If you don't want notifications to be logged, set this value to 0.
-# If notifications should be logged, set the value to 1.
-
-log_notifications=1
-
-
-
-# SERVICE RETRY LOGGING OPTION
-# If you don't want service check retries to be logged, set this value
-# to 0. If retries should be logged, set the value to 1.
-
-log_service_retries=1
-
-
-
-# HOST RETRY LOGGING OPTION
-# If you don't want host check retries to be logged, set this value to
-# 0. If retries should be logged, set the value to 1.
-
-log_host_retries=1
-
-
-
-# EVENT HANDLER LOGGING OPTION
-# If you don't want host and service event handlers to be logged, set
-# this value to 0. If event handlers should be logged, set the value
-# to 1.
-
-log_event_handlers=1
-
-
-
-# INITIAL STATES LOGGING OPTION
-# If you want Nagios to log all initial host and service states to
-# the main log file (the first time the service or host is checked)
-# you can enable this option by setting this value to 1. If you
-# are not using an external application that does long term state
-# statistics reporting, you do not need to enable this option. In
-# this case, set the value to 0.
-
-log_initial_states=0
-
-
-
-# EXTERNAL COMMANDS LOGGING OPTION
-# If you don't want Nagios to log external commands, set this value
-# to 0. If external commands should be logged, set this value to 1.
-# Note: This option does not include logging of passive service
-# checks - see the option below for controlling whether or not
-# passive checks are logged.
-
-log_external_commands=1
-
-
-
-# PASSIVE CHECKS LOGGING OPTION
-# If you don't want Nagios to log passive host and service checks, set
-# this value to 0. If passive checks should be logged, set
-# this value to 1.
-
-log_passive_checks=1
-
-
-
-# GLOBAL HOST AND SERVICE EVENT HANDLERS
-# These options allow you to specify a host and service event handler
-# command that is to be run for every host or service state change.
-# The global event handler is executed immediately prior to the event
-# handler that you have optionally specified in each host or
-# service definition. The command argument is the short name of a
-# command definition that you define in your host configuration file.
-# Read the HTML docs for more information.
-
-#global_host_event_handler=somecommand
-#global_service_event_handler=somecommand
-
-
-
-# SERVICE INTER-CHECK DELAY METHOD
-# This is the method that Nagios should use when initially
-# "spreading out" service checks when it starts monitoring. The
-# default is to use smart delay calculation, which will try to
-# space all service checks out evenly to minimize CPU load.
-# Using the dumb setting will cause all checks to be scheduled
-# at the same time (with no delay between them)! This is not a
-# good thing for production, but is useful when testing the
-# parallelization functionality.
-# n = None - don't use any delay between checks
-# d = Use a "dumb" delay of 1 second between checks
-# s = Use "smart" inter-check delay calculation
-# x.xx = Use an inter-check delay of x.xx seconds
-
-service_inter_check_delay_method=s
-
-
-
-# MAXIMUM SERVICE CHECK SPREAD
-# This variable determines the timeframe (in minutes) from the
-# program start time that an initial check of all services should
-# be completed. Default is 30 minutes.
-
-max_service_check_spread=30
-
-
-
-# SERVICE CHECK INTERLEAVE FACTOR
-# This variable determines how service checks are interleaved.
-# Interleaving the service checks allows for a more even
-# distribution of service checks and reduced load on remote
-# hosts. Setting this value to 1 is equivalent to how versions
-# of Nagios previous to 0.0.5 did service checks. Set this
-# value to s (smart) for automatic calculation of the interleave
-# factor unless you have a specific reason to change it.
-# s = Use "smart" interleave factor calculation
-# x = Use an interleave factor of x, where x is a
-# number greater than or equal to 1.
-
-service_interleave_factor=s
-
-
-
-# HOST INTER-CHECK DELAY METHOD
-# This is the method that Nagios should use when initially
-# "spreading out" host checks when it starts monitoring. The
-# default is to use smart delay calculation, which will try to
-# space all host checks out evenly to minimize CPU load.
-# Using the dumb setting will cause all checks to be scheduled
-# at the same time (with no delay between them)!
-# n = None - don't use any delay between checks
-# d = Use a "dumb" delay of 1 second between checks
-# s = Use "smart" inter-check delay calculation
-# x.xx = Use an inter-check delay of x.xx seconds
-
-host_inter_check_delay_method=s
-
-
-
-# MAXIMUM HOST CHECK SPREAD
-# This variable determines the timeframe (in minutes) from the
-# program start time that an initial check of all hosts should
-# be completed. Default is 30 minutes.
-
-max_host_check_spread=30
-
-
-
-# MAXIMUM CONCURRENT SERVICE CHECKS
-# This option allows you to specify the maximum number of
-# service checks that can be run in parallel at any given time.
-# Specifying a value of 1 for this variable essentially prevents
-# any service checks from being parallelized. A value of 0
-# will not restrict the number of concurrent checks that are
-# being executed.
-
-max_concurrent_checks=0
-
-
-
-# SERVICE CHECK REAPER FREQUENCY
-# This is the frequency (in seconds!) that Nagios will process
-# the results of services that have been checked.
-
-service_reaper_frequency=10
-
-
-
-# CHECK RESULT BUFFER SLOTS
-# This settings is used to tweak the number of items or "slots" that
-# the Nagios daemon should allocate to the buffer that holds
-# service check results before they are processed. As check results
-# are processed by the daemon, they are removed from the buffer.
-
-check_result_buffer_slots=4096
-
-
-
-# AUTO-RESCHEDULING OPTION
-# This option determines whether or not Nagios will attempt to
-# automatically reschedule active host and service checks to
-# "smooth" them out over time. This can help balance the load on
-# the monitoring server.
-# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
-# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
-
-auto_reschedule_checks=0
-
-
-
-# AUTO-RESCHEDULING INTERVAL
-# This option determines how often (in seconds) Nagios will
-# attempt to automatically reschedule checks. This option only
-# has an effect if the auto_reschedule_checks option is enabled.
-# Default is 30 seconds.
-# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
-# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
-
-auto_rescheduling_interval=30
-
-
-
-
-# AUTO-RESCHEDULING WINDOW
-# This option determines the "window" of time (in seconds) that
-# Nagios will look at when automatically rescheduling checks.
-# Only host and service checks that occur in the next X seconds
-# (determined by this variable) will be rescheduled. This option
-# only has an effect if the auto_reschedule_checks option is
-# enabled. Default is 180 seconds (3 minutes).
-# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
-# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
-
-auto_rescheduling_window=180
-
-
-
-# SLEEP TIME
-# This is the number of seconds to sleep between checking for system
-# events and service checks that need to be run.
-
-sleep_time=0.25
-
-
-
-# TIMEOUT VALUES
-# These options control how much time Nagios will allow various
-# types of commands to execute before killing them off. Options
-# are available for controlling maximum time allotted for
-# service checks, host checks, event handlers, notifications, the
-# ocsp command, and performance data commands. All values are in
-# seconds.
-
-service_check_timeout=60
-host_check_timeout=30
-event_handler_timeout=30
-notification_timeout=30
-ocsp_timeout=5
-perfdata_timeout=5
-
-
-
-# RETAIN STATE INFORMATION
-# This setting determines whether or not Nagios will save state
-# information for services and hosts before it shuts down. Upon
-# startup Nagios will reload all saved service and host state
-# information before starting to monitor. This is useful for
-# maintaining long-term data on state statistics, etc, but will
-# slow Nagios down a bit when it (re)starts. Since its only
-# a one-time penalty, I think its well worth the additional
-# startup delay.
-
-retain_state_information=1
-
-
-
-# STATE RETENTION FILE
-# This is the file that Nagios should use to store host and
-# service state information before it shuts down. The state
-# information in this file is also read immediately prior to
-# starting to monitor the network when Nagios is restarted.
-# This file is used only if the preserve_state_information
-# variable is set to 1.
-
-state_retention_file=/var/log/nagios/retention.dat
-
-
-
-# RETENTION DATA UPDATE INTERVAL
-# This setting determines how often (in minutes) that Nagios
-# will automatically save retention data during normal operation.
-# If you set this value to 0, Nagios will not save retention
-# data at regular interval, but it will still save retention
-# data before shutting down or restarting. If you have disabled
-# state retention, this option has no effect.
-
-retention_update_interval=60
-
-
-
-# USE RETAINED PROGRAM STATE
-# This setting determines whether or not Nagios will set
-# program status variables based on the values saved in the
-# retention file. If you want to use retained program status
-# information, set this value to 1. If not, set this value
-# to 0.
-
-use_retained_program_state=1
-
-
-
-# USE RETAINED SCHEDULING INFO
-# This setting determines whether or not Nagios will retain
-# the scheduling info (next check time) for hosts and services
-# based on the values saved in the retention file. If you
-# If you want to use retained scheduling info, set this
-# value to 1. If not, set this value to 0.
-
-use_retained_scheduling_info=0
-
-
-
-# INTERVAL LENGTH
-# This is the seconds per unit interval as used in the
-# host/contact/service configuration files. Setting this to 60 means
-# that each interval is one minute long (60 seconds). Other settings
-# have not been tested much, so your mileage is likely to vary...
-
-interval_length=60
-
-
-
-# AGGRESSIVE HOST CHECKING OPTION
-# If you don't want to turn on aggressive host checking features, set
-# this value to 0 (the default). Otherwise set this value to 1 to
-# enable the aggressive check option. Read the docs for more info
-# on what aggressive host check is or check out the source code in
-# base/checks.c
-
-use_aggressive_host_checking=0
-
-
-
-# SERVICE CHECK EXECUTION OPTION
-# This determines whether or not Nagios will actively execute
-# service checks when it initially starts. If this option is
-# disabled, checks are not actively made, but Nagios can still
-# receive and process passive check results that come in. Unless
-# you're implementing redundant hosts or have a special need for
-# disabling the execution of service checks, leave this enabled!
-# Values: 1 = enable checks, 0 = disable checks
-
-execute_service_checks=1
-
-
-
-# PASSIVE SERVICE CHECK ACCEPTANCE OPTION
-# This determines whether or not Nagios will accept passive
-# service checks results when it initially (re)starts.
-# Values: 1 = accept passive checks, 0 = reject passive checks
-
-accept_passive_service_checks=1
-
-
-
-# HOST CHECK EXECUTION OPTION
-# This determines whether or not Nagios will actively execute
-# host checks when it initially starts. If this option is
-# disabled, checks are not actively made, but Nagios can still
-# receive and process passive check results that come in. Unless
-# you're implementing redundant hosts or have a special need for
-# disabling the execution of host checks, leave this enabled!
-# Values: 1 = enable checks, 0 = disable checks
-
-execute_host_checks=1
-
-
-
-# PASSIVE HOST CHECK ACCEPTANCE OPTION
-# This determines whether or not Nagios will accept passive
-# host checks results when it initially (re)starts.
-# Values: 1 = accept passive checks, 0 = reject passive checks
-
-accept_passive_host_checks=1
-
-
-
-# NOTIFICATIONS OPTION
-# This determines whether or not Nagios will sent out any host or
-# service notifications when it is initially (re)started.
-# Values: 1 = enable notifications, 0 = disable notifications
-
-enable_notifications=1
-
-
-
-# EVENT HANDLER USE OPTION
-# This determines whether or not Nagios will run any host or
-# service event handlers when it is initially (re)started. Unless
-# you're implementing redundant hosts, leave this option enabled.
-# Values: 1 = enable event handlers, 0 = disable event handlers
-
-enable_event_handlers=1
-
-
-
-# PROCESS PERFORMANCE DATA OPTION
-# This determines whether or not Nagios will process performance
-# data returned from service and host checks. If this option is
-# enabled, host performance data will be processed using the
-# host_perfdata_command (defined below) and service performance
-# data will be processed using the service_perfdata_command (also
-# defined below). Read the HTML docs for more information on
-# performance data.
-# Values: 1 = process performance data, 0 = do not process performance data
-
-process_performance_data=0
-
-
-
-# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS
-# These commands are run after every host and service check is
-# performed. These commands are executed only if the
-# enable_performance_data option (above) is set to 1. The command
-# argument is the short name of a command definition that you
-# define in your host configuration file. Read the HTML docs for
-# more information on performance data.
-
-#host_perfdata_command=process-host-perfdata
-#service_perfdata_command=process-service-perfdata
-
-
-
-# HOST AND SERVICE PERFORMANCE DATA FILES
-# These files are used to store host and service performance data.
-# Performance data is only written to these files if the
-# enable_performance_data option (above) is set to 1.
-
-#host_perfdata_file=/tmp/host-perfdata
-#service_perfdata_file=/tmp/service-perfdata
-
-
-
-# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES
-# These options determine what data is written (and how) to the
-# performance data files. The templates may contain macros, special
-# characters (\t for tab, \r for carriage return, \n for newline)
-# and plain text. A newline is automatically added after each write
-# to the performance data file. Some examples of what you can do are
-# shown below.
-
-#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$
-#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$
-
-
-
-
-# HOST AND SERVICE PERFORMANCE DATA FILE MODES
-# This option determines whether or not the host and service
-# performance data files are opened in write ("w") or append ("a")
-# mode. Unless you are the files are named pipes, you will probably
-# want to use the default mode of append ("a").
-
-#host_perfdata_file_mode=a
-#service_perfdata_file_mode=a
-
-
-
-# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL
-# These options determine how often (in seconds) the host and service
-# performance data files are processed using the commands defined
-# below. A value of 0 indicates the files should not be periodically
-# processed.
-
-#host_perfdata_file_processing_interval=0
-#service_perfdata_file_processing_interval=0
-
-
-
-# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS
-# These commands are used to periodically process the host and
-# service performance data files. The interval at which the
-# processing occurs is determined by the options above.
-
-#host_perfdata_file_processing_command=process-host-perfdata-file
-#service_perfdata_file_processing_command=process-service-perfdata-file
-
-
-
-# OBSESS OVER SERVICE CHECKS OPTION
-# This determines whether or not Nagios will obsess over service
-# checks and run the ocsp_command defined below. Unless you're
-# planning on implementing distributed monitoring, do not enable
-# this option. Read the HTML docs for more information on
-# implementing distributed monitoring.
-# Values: 1 = obsess over services, 0 = do not obsess (default)
-
-obsess_over_services=0
-
-
-
-# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND
-# This is the command that is run for every service check that is
-# processed by Nagios. This command is executed only if the
-# obsess_over_service option (above) is set to 1. The command
-# argument is the short name of a command definition that you
-# define in your host configuration file. Read the HTML docs for
-# more information on implementing distributed monitoring.
-
-#ocsp_command=somecommand
-
-
-
-# ORPHANED SERVICE CHECK OPTION
-# This determines whether or not Nagios will periodically
-# check for orphaned services. Since service checks are not
-# rescheduled until the results of their previous execution
-# instance are processed, there exists a possibility that some
-# checks may never get rescheduled. This seems to be a rare
-# problem and should not happen under normal circumstances.
-# If you have problems with service checks never getting
-# rescheduled, you might want to try enabling this option.
-# Values: 1 = enable checks, 0 = disable checks
-
-check_for_orphaned_services=1
-
-
-
-# SERVICE FRESHNESS CHECK OPTION
-# This option determines whether or not Nagios will periodically
-# check the "freshness" of service results. Enabling this option
-# is useful for ensuring passive checks are received in a timely
-# manner.
-# Values: 1 = enabled freshness checking, 0 = disable freshness checking
-
-check_service_freshness=1
-
-
-
-# SERVICE FRESHNESS CHECK INTERVAL
-# This setting determines how often (in seconds) Nagios will
-# check the "freshness" of service check results. If you have
-# disabled service freshness checking, this option has no effect.
-
-service_freshness_check_interval=60
-
-
-
-# HOST FRESHNESS CHECK OPTION
-# This option determines whether or not Nagios will periodically
-# check the "freshness" of host results. Enabling this option
-# is useful for ensuring passive checks are received in a timely
-# manner.
-# Values: 1 = enabled freshness checking, 0 = disable freshness checking
-
-check_host_freshness=0
-
-
-
-# HOST FRESHNESS CHECK INTERVAL
-# This setting determines how often (in seconds) Nagios will
-# check the "freshness" of host check results. If you have
-# disabled host freshness checking, this option has no effect.
-
-host_freshness_check_interval=60
-
-
-
-# AGGREGATED STATUS UPDATES
-# This option determines whether or not Nagios will
-# aggregate updates of host, service, and program status
-# data. Normally, status data is updated immediately when
-# a change occurs. This can result in high CPU loads if
-# you are monitoring a lot of services. If you want Nagios
-# to only refresh status data every few seconds, disable
-# this option.
-# Values: 1 = enable aggregate updates, 0 = disable aggregate updates
-
-aggregate_status_updates=1
-
-
-
-# AGGREGATED STATUS UPDATE INTERVAL
-# Combined with the aggregate_status_updates option,
-# this option determines the frequency (in seconds!) that
-# Nagios will periodically dump program, host, and
-# service status data. If you are not using aggregated
-# status data updates, this option has no effect.
-
-status_update_interval=15
-
-
-
-# FLAP DETECTION OPTION
-# This option determines whether or not Nagios will try
-# and detect hosts and services that are "flapping".
-# Flapping occurs when a host or service changes between
-# states too frequently. When Nagios detects that a
-# host or service is flapping, it will temporarily suppress
-# notifications for that host/service until it stops
-# flapping. Flap detection is very experimental, so read
-# the HTML documentation before enabling this feature!
-# Values: 1 = enable flap detection
-# 0 = disable flap detection (default)
-
-enable_flap_detection=0
-
-
-
-# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES
-# Read the HTML documentation on flap detection for
-# an explanation of what this option does. This option
-# has no effect if flap detection is disabled.
-
-low_service_flap_threshold=5.0
-high_service_flap_threshold=20.0
-low_host_flap_threshold=5.0
-high_host_flap_threshold=20.0
-
-
-
-# DATE FORMAT OPTION
-# This option determines how short dates are displayed. Valid options
-# include:
-# us (MM-DD-YYYY HH:MM:SS)
-# euro (DD-MM-YYYY HH:MM:SS)
-# iso8601 (YYYY-MM-DD HH:MM:SS)
-# strict-iso8601 (YYYY-MM-DDTHH:MM:SS)
-#
-
-date_format=us
-
-
-
-# P1.PL FILE LOCATION
-# This value determines where the p1.pl perl script (used by the
-# embedded Perl interpreter) is located. If you didn't compile
-# Nagios with embedded Perl support, this option has no effect.
-
-p1_file=/usr/sbin/p1.pl
-
-
-
-# ILLEGAL OBJECT NAME CHARACTERS
-# This option allows you to specify illegal characters that cannot
-# be used in host names, service descriptions, or names of other
-# object types.
-
-illegal_object_name_chars=`~!$%^&*|'"<>?,()=
-
-
-
-# ILLEGAL MACRO OUTPUT CHARACTERS
-# This option allows you to specify illegal characters that are
-# stripped from macros before being used in notifications, event
-# handlers, etc. This DOES NOT affect macros used in service or
-# host check commands.
-# The following macros are stripped of the characters you specify:
-# $HOSTOUTPUT$
-# $HOSTPERFDATA$
-# $HOSTACKAUTHOR$
-# $HOSTACKCOMMENT$
-# $SERVICEOUTPUT$
-# $SERVICEPERFDATA$
-# $SERVICEACKAUTHOR$
-# $SERVICEACKCOMMENT$
-
-illegal_macro_output_chars=`~$&|'"<>
-
-
-
-# REGULAR EXPRESSION MATCHING
-# This option controls whether or not regular expression matching
-# takes place in the object config files. Regular expression
-# matching is used to match host, hostgroup, service, and service
-# group names/descriptions in some fields of various object types.
-# Values: 1 = enable regexp matching, 0 = disable regexp matching
-
-use_regexp_matching=0
-
-
-
-# "TRUE" REGULAR EXPRESSION MATCHING
-# This option controls whether or not "true" regular expression
-# matching takes place in the object config files. This option
-# only has an effect if regular expression matching is enabled
-# (see above). If this option is DISABLED, regular expression
-# matching only occurs if a string contains wildcard characters
-# (* and ?). If the option is ENABLED, regexp matching occurs
-# all the time (which can be annoying).
-# Values: 1 = enable true matching, 0 = disable true matching
-
-use_true_regexp_matching=0
-
-
-
-
-# ADMINISTRATOR EMAIL ADDRESS
-# The email address of the administrator of *this* machine (the one
-# doing the monitoring). Nagios never uses this value itself, but
-# you can access this value by using the $ADMINEMAIL$ macro in your
-# notification commands.
-
-admin_email=nagios
-
-
-
-# ADMINISTRATOR PAGER NUMBER/ADDRESS
-# The pager number/address for the administrator of *this* machine.
-# Nagios never uses this value itself, but you can access this
-# value by using the $ADMINPAGER$ macro in your notification
-# commands.
-
-admin_pager=pagenagios
-
-
-
-# DAEMON CORE DUMP OPTION
-# This option determines whether or not Nagios is allowed to create
-# a core dump when it runs as a daemon. Note that it is generally
-# considered bad form to allow this, but it may be useful for
-# debugging purposes.
-# Values: 1 - Allow core dumps
-# 0 - Do not allow core dumps (default)
-
-daemon_dumps_core=0
-
-
-
diff --git a/templates/service.erb b/templates/service.erb
deleted file mode 100644
index 5799aca..0000000
--- a/templates/service.erb
+++ /dev/null
@@ -1,7 +0,0 @@
-define service {
- host_name <%= nagios2_host_name %>
- service_description <%= name %>
- check_command <%= real_check_command %>
- use generic-service
-}
-