diff options
Diffstat (limited to 'files/config/Debian.wheezy/apache2.conf')
| -rw-r--r-- | files/config/Debian.wheezy/apache2.conf | 268 |
1 files changed, 268 insertions, 0 deletions
diff --git a/files/config/Debian.wheezy/apache2.conf b/files/config/Debian.wheezy/apache2.conf new file mode 100644 index 0000000..5054567 --- /dev/null +++ b/files/config/Debian.wheezy/apache2.conf @@ -0,0 +1,268 @@ +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See http://httpd.apache.org/docs/2.2/ for detailed information about +# the directives and /usr/share/doc/apache2-common/README.Debian.gz about +# Debian specific hints. +# +# +# Summary of how the Apache 2 configuration works in Debian: +# The Apache 2 web server configuration in Debian is quite different to +# upstream's suggested way to configure the web server. This is because Debian's +# default Apache2 installation attempts to make adding and removing modules, +# virtual hosts, and extra configuration directives as flexible as possible, in +# order to make automating the changes and administering the server as easy as +# possible. + +# It is split into several files forming the configuration hierarchy outlined +# below, all located in the /etc/apache2/ directory: +# +# /etc/apache2/ +# |-- apache2.conf +# | `-- ports.conf +# |-- mods-enabled +# | |-- *.load +# | `-- *.conf +# |-- conf.d +# | `-- * +# `-- sites-enabled +# `-- * +# +# +# * apache2.conf is the main configuration file (this file). It puts the pieces +# together by including all remaining configuration files when starting up the +# web server. +# +# In order to avoid conflicts with backup files, the Include directive is +# adapted to ignore files that: +# - do not begin with a letter or number +# - contain a character that is neither letter nor number nor _-:. +# - contain .dpkg +# +# Yet we strongly suggest that all configuration files either end with a +# .conf or .load suffix in the file name. The next Debian release will +# ignore files not ending with .conf (or .load for mods-enabled). +# +# * ports.conf is always included from the main configuration file. It is +# supposed to determine listening ports for incoming connections, and which +# of these ports are used for name based virtual hosts. +# +# * Configuration files in the mods-enabled/ and sites-enabled/ directories +# contain particular configuration snippets which manage modules or virtual +# host configurations, respectively. +# +# They are activated by symlinking available configuration files from their +# respective *-available/ counterparts. These should be managed by using our +# helpers a2enmod/a2dismod, a2ensite/a2dissite. See +# their respective man pages for detailed information. +# +# * Configuration files in the conf.d directory are either provided by other +# packages or may be added by the local administrator. Local additions +# should start with local- or end with .local.conf to avoid name clashes. All +# files in conf.d are considered (excluding the exceptions noted above) by +# the Apache 2 web server. +# +# * The binary is called apache2. Due to the use of environment variables, in +# the default configuration, apache2 needs to be started/stopped with +# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not +# work with the default configuration. + + +# Global configuration +# + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# NOTE! If you intend to place this on an NFS (or otherwise network) +# mounted filesystem then please read the LockFile documentation (available +# at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>); +# you will save yourself a lot of trouble. +# +# Do NOT add a slash at the end of the directory path. +# +#ServerRoot "/etc/apache2" + +# +# The accept serialization lock file MUST BE STORED ON A LOCAL DISK. +# +LockFile ${APACHE_LOCK_DIR}/accept.lock + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# This needs to be set in /etc/apache2/envvars +# +PidFile ${APACHE_PID_FILE} + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 5 + +## +## Server-Pool Size Regulation (MPM specific) +## + +# prefork MPM +# StartServers: number of server processes to start +# MinSpareServers: minimum number of server processes which are kept spare +# MaxSpareServers: maximum number of server processes which are kept spare +# MaxClients: maximum number of server processes allowed to start +# MaxRequestsPerChild: maximum number of requests a server process serves +<IfModule mpm_prefork_module> + StartServers 5 + MinSpareServers 5 + MaxSpareServers 10 + MaxClients 150 + MaxRequestsPerChild 0 +</IfModule> + +# worker MPM +# StartServers: initial number of server processes to start +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a +# graceful restart. ThreadLimit can only be changed by stopping +# and starting Apache. +# ThreadsPerChild: constant number of worker threads in each server process +# MaxClients: maximum number of simultaneous client connections +# MaxRequestsPerChild: maximum number of requests a server process serves +<IfModule mpm_worker_module> + StartServers 2 + MinSpareThreads 25 + MaxSpareThreads 75 + ThreadLimit 64 + ThreadsPerChild 25 + MaxClients 150 + MaxRequestsPerChild 0 +</IfModule> + +# event MPM +# StartServers: initial number of server processes to start +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# ThreadsPerChild: constant number of worker threads in each server process +# MaxClients: maximum number of simultaneous client connections +# MaxRequestsPerChild: maximum number of requests a server process serves +<IfModule mpm_event_module> + StartServers 2 + MinSpareThreads 25 + MaxSpareThreads 75 + ThreadLimit 64 + ThreadsPerChild 25 + MaxClients 150 + MaxRequestsPerChild 0 +</IfModule> + +# These need to be set in /etc/apache2/envvars +User ${APACHE_RUN_USER} +Group ${APACHE_RUN_GROUP} + +# +# AccessFileName: The name of the file to look for in each directory +# for additional configuration directives. See also the AllowOverride +# directive. +# + +AccessFileName .htaccess + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# +<Files ~ "^\.ht"> + Order allow,deny + Deny from all + Satisfy all +</Files> + +# +# DefaultType is the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +# It is also possible to omit any default MIME type and let the +# client's browser guess an appropriate action instead. Typically the +# browser will decide based on the file's extension then. In cases +# where no good assumption can be made, letting the default MIME type +# unset is suggested instead of forcing the browser to accept +# incorrect metadata. +# +DefaultType None + + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a <VirtualHost> +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a <VirtualHost> +# container, that host's errors will be logged there and not here. +# +ErrorLog ${APACHE_LOG_DIR}/error.log + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +# Include module configuration: +Include mods-enabled/*.load +Include mods-enabled/*.conf + +# Include list of ports to listen on and which to use for name based vhosts +Include ports.conf + +# +# The following directives define some format nicknames for use with +# a CustomLog directive (see below). +# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i +# +LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined +LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined +LogFormat "%h %l %u %t \"%r\" %>s %O" common +LogFormat "%{Referer}i -> %U" referer +LogFormat "%{User-agent}i" agent + +# Include of directories ignores editors' and dpkg's backup files, +# see the comments above for details. + +# Include generic snippets of statements +Include conf.d/ + +# Include the virtual host configurations: +Include sites-enabled/ |