summaryrefslogtreecommitdiff
path: root/files/conf/ssl_defaults.inc
diff options
context:
space:
mode:
Diffstat (limited to 'files/conf/ssl_defaults.inc')
-rw-r--r--files/conf/ssl_defaults.inc140
1 files changed, 140 insertions, 0 deletions
diff --git a/files/conf/ssl_defaults.inc b/files/conf/ssl_defaults.inc
new file mode 100644
index 0000000..302b701
--- /dev/null
+++ b/files/conf/ssl_defaults.inc
@@ -0,0 +1,140 @@
+# Use separate log files for the SSL virtual host; note that LogLevel
+# is not inherited from httpd.conf.
+ErrorLog logs/ssl_error_log
+#TransferLog logs/ssl_access_log
+LogLevel warn
+
+# SSL Engine Switch:
+# Enable/Disable SSL for this virtual host.
+SSLEngine on
+
+# SSL Protocol support:
+# List the enable protocol levels with which clients will be able to
+# connect. Disable SSLv2 access by default:
+SSLProtocol all -SSLv2
+
+# SSL Cipher Suite:
+# List the ciphers that the client is permitted to negotiate.
+# See the mod_ssl documentation for a complete list.
+SSLCipherSuite ALL:!ADH:!EXPORT:!SSLv2:RC4+RSA:+HIGH:+MEDIUM:+LOW
+
+# Server Certificate:
+# Point SSLCertificateFile at a PEM encoded certificate. If
+# the certificate is encrypted, then you will be prompted for a
+# pass phrase. Note that a kill -HUP will prompt again. A new
+# certificate can be generated using the genkey(1) command.
+#SSLCertificateFile /etc/pki/tls/certs/static.swissflirt.ch.crt
+
+# Server Private Key:
+# If the key is not combined with the certificate, use this
+# directive to point at the key file. Keep in mind that if
+# you've both a RSA and a DSA private key you can configure
+# both in parallel (to also allow the use of DSA ciphers, etc.)
+#SSLCertificateKeyFile /etc/pki/tls/private/static.swissflirt.ch.key
+
+# Server Certificate Chain:
+# Point SSLCertificateChainFile at a file containing the
+# concatenation of PEM encoded CA certificates which form the
+# certificate chain for the server certificate. Alternatively
+# the referenced file can be the same as SSLCertificateFile
+# when the CA certificates are directly appended to the server
+# certificate for convinience.
+#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
+
+# Certificate Authority (CA):
+# Set the CA certificate verification path where to find CA
+# certificates for client authentication or alternatively one
+# huge file containing all of them (file must be PEM encoded)
+#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
+
+# Client Authentication (Type):
+# Client certificate verification type and depth. Types are
+# none, optional, require and optional_no_ca. Depth is a
+# number which specifies how deeply to verify the certificate
+# issuer chain before deciding the certificate is not valid.
+#SSLVerifyClient require
+#SSLVerifyDepth 10
+
+# Access Control:
+# With SSLRequire you can do per-directory access control based
+# on arbitrary complex boolean expressions containing server
+# variable checks and other lookup directives. The syntax is a
+# mixture between C and Perl. See the mod_ssl documentation
+# for more details.
+#<Location />
+#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
+# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
+# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
+# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
+# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
+# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
+#</Location>
+
+# SSL Engine Options:
+# Set various options for the SSL engine.
+# o FakeBasicAuth:
+# Translate the client X.509 into a Basic Authorisation. This means that
+# the standard Auth/DBMAuth methods can be used for access control. The
+# user name is the `one line' version of the client's X.509 certificate.
+# Note that no password is obtained from the user. Every entry in the user
+# file needs this password: `xxj31ZMTZzkVA'.
+# o ExportCertData:
+# This exports two additional environment variables: SSL_CLIENT_CERT and
+# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
+# server (always existing) and the client (only existing when client
+# authentication is used). This can be used to import the certificates
+# into CGI scripts.
+# o StdEnvVars:
+# This exports the standard SSL/TLS related `SSL_*' environment variables.
+# Per default this exportation is switched off for performance reasons,
+# because the extraction step is an expensive operation and is usually
+# useless for serving static content. So one usually enables the
+# exportation for CGI and SSI requests only.
+# o StrictRequire:
+# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
+# under a "Satisfy any" situation, i.e. when it applies access is denied
+# and no other module can change it.
+# o OptRenegotiate:
+# This enables optimized SSL connection renegotiation handling when SSL
+# directives are used in per-directory context.
+#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
+<Files ~ "\.(cgi|shtml|phtml|php3?)$">
+ SSLOptions +StdEnvVars
+</Files>
+<Directory "/var/www/cgi-bin">
+ SSLOptions +StdEnvVars
+</Directory>
+
+# SSL Protocol Adjustments:
+# The safe and default but still SSL/TLS standard compliant shutdown
+# approach is that mod_ssl sends the close notify alert but doesn't wait for
+# the close notify alert from client. When you need a different shutdown
+# approach you can use one of the following variables:
+# o ssl-unclean-shutdown:
+# This forces an unclean shutdown when the connection is closed, i.e. no
+# SSL close notify alert is send or allowed to received. This violates
+# the SSL/TLS standard but is needed for some brain-dead browsers. Use
+# this when you receive I/O errors because of the standard approach where
+# mod_ssl sends the close notify alert.
+# o ssl-accurate-shutdown:
+# This forces an accurate shutdown when the connection is closed, i.e. a
+# SSL close notify alert is send and mod_ssl waits for the close notify
+# alert of the client. This is 100% SSL/TLS standard compliant, but in
+# practice often causes hanging connections with brain-dead browsers. Use
+# this only for browsers where you know that their SSL implementation
+# works correctly.
+# Notice: Most problems of broken clients are also related to the HTTP
+# keep-alive facility, so you usually additionally want to disable
+# keep-alive for those clients, too. Use variable "nokeepalive" for this.
+# Similarly, one has to force some clients to use HTTP/1.0 to workaround
+# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
+# "force-response-1.0" for this.
+SetEnvIf User-Agent ".*MSIE.*" \
+ nokeepalive ssl-unclean-shutdown \
+ downgrade-1.0 force-response-1.0
+
+# Per-Server Logging:
+# The home of a custom SSL log file. Use this when you want a
+# compact non-error SSL logfile on a virtual host basis.
+CustomLog logs/ssl_request_log \
+ "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"