diff options
Diffstat (limited to 'templates/Debian-8.0-amd64-netboot/preseed.cfg')
| -rw-r--r-- | templates/Debian-8.0-amd64-netboot/preseed.cfg | 313 |
1 files changed, 0 insertions, 313 deletions
diff --git a/templates/Debian-8.0-amd64-netboot/preseed.cfg b/templates/Debian-8.0-amd64-netboot/preseed.cfg deleted file mode 100644 index a0613c7..0000000 --- a/templates/Debian-8.0-amd64-netboot/preseed.cfg +++ /dev/null @@ -1,313 +0,0 @@ -#### Contents of the preconfiguration file (for jessie) -### Localization -# Locale sets language and country. -d-i debian-installer/locale string en_US.UTF-8 - -# Keyboard selection. -#d-i keymap select us -d-i keyboard-configuration/xkb-keymap select us - -### Network configuration -# netcfg will choose an interface that has link if possible. This makes it -# skip displaying a list if there is more than one interface. -d-i netcfg/choose_interface select auto - -# To pick a particular interface instead: -#d-i netcfg/choose_interface select eth1 - -# If you have a slow dhcp server and the installer times out waiting for -# it, this might be useful. -#d-i netcfg/dhcp_timeout string 60 - -# If you prefer to configure the network manually, uncomment this line and -# the static network configuration below. -#d-i netcfg/disable_dhcp boolean true - -# If you want the preconfiguration file to work on systems both with and -# without a dhcp server, uncomment these lines and the static network -# configuration below. -#d-i netcfg/dhcp_failed note -#d-i netcfg/dhcp_options select Configure network manually - -# Static network configuration. -#d-i netcfg/get_nameservers string 192.168.1.1 -#d-i netcfg/get_ipaddress string 192.168.1.42 -#d-i netcfg/get_netmask string 255.255.255.0 -#d-i netcfg/get_gateway string 192.168.1.1 -#d-i netcfg/confirm_static boolean true - -# Any hostname and domain names assigned from dhcp take precedence over -# values set here. However, setting the values still prevents the questions -# from being shown, even if values come from dhcp. -#d-i netcfg/get_hostname string vagrant -d-i netcfg/get_domain string vagrantup.com - -# Disable that annoying WEP key dialog. -d-i netcfg/wireless_wep string -# The wacky dhcp hostname that some ISPs use as a password of sorts. -#d-i netcfg/dhcp_hostname string radish - -# If non-free firmware is needed for the network or other hardware, you can -# configure the installer to always try to load it, without prompting. Or -# change to false to disable asking. -#d-i hw-detect/load_firmware boolean true - -### Network console -# Use the following settings if you wish to make use of the network-console -# component for remote installation over SSH. This only makes sense if you -# intend to perform the remainder of the installation manually. -#d-i anna/choose_modules string network-console -#d-i network-console/password password r00tme -#d-i network-console/password-again password r00tme - -### Mirror settings -# If you select ftp, the mirror/country string does not need to be set. -#d-i mirror/protocol string ftp -d-i mirror/country string manual -d-i mirror/http/hostname string http.debian.net -d-i mirror/http/directory string /debian -d-i mirror/http/proxy string - -# Suite to install. -#d-i mirror/suite string testing -# Suite to use for loading installer components (optional). -#d-i mirror/udeb/suite string testing - -### Clock and time zone setup -# Controls whether or not the hardware clock is set to UTC. -d-i clock-setup/utc boolean true - -# You may set this to any valid setting for $TZ; see the contents of -# /usr/share/zoneinfo/ for valid values. -d-i time/zone string UTC - -# Controls whether to use NTP to set the clock during the install -d-i clock-setup/ntp boolean true -# NTP server to use. The default is almost always fine here. -#d-i clock-setup/ntp-server string ntp.example.com - -### Partitioning -# If the system has free space you can choose to only partition that space. -#d-i partman-auto/init_automatically_partition select biggest_free - -# Alternatively, you can specify a disk to partition. The device name must -# be given in traditional non-devfs format. -# Note: A disk must be specified, unless the system has only one disk. -# For example, to use the first SCSI/SATA hard disk: -#d-i partman-auto/disk string /dev/sda -# In addition, you'll need to specify the method to use. -# The presently available methods are: "regular", "lvm" and "crypto" -d-i partman-auto/method string lvm - -# If one of the disks that are going to be automatically partitioned -# contains an old LVM configuration, the user will normally receive a -# warning. This can be preseeded away... -d-i partman-lvm/device_remove_lvm boolean true -# The same applies to pre-existing software RAID array: -d-i partman-md/device_remove_md boolean true - -# And the same goes for the confirmation to write the lvm partitions. -d-i partman-lvm/confirm boolean true -d-i partman-lvm/confirm_nooverwrite boolean true - - -d-i partman/choose_partition select finish -d-i partman-auto-lvm/guided_size string max - -# You can choose one of the three predefined partitioning recipes: -# - atomic: all files in one partition -# - home: separate /home partition -# - multi: separate /home, /usr, /var, and /tmp partitions -d-i partman-auto/choose_recipe select atomic -d-i partman/default_filesystem string ext3 - -# Or provide a recipe of your own... -# The recipe format is documented in the file devel/partman-auto-recipe.txt. -# If you have a way to get a recipe file into the d-i environment, you can -# just point at it. -#d-i partman-auto/expert_recipe_file string /hd-media/recipe - -# If not, you can put an entire recipe into the preconfiguration file in one -# (logical) line. This example creates a small /boot partition, suitable -# swap, and uses the rest of the space for the root partition: -#d-i partman-auto/expert_recipe string \ -# boot-root :: \ -# 40 50 100 ext3 \ -# $primary{ } $bootable{ } \ -# method{ format } format{ } \ -# use_filesystem{ } filesystem{ ext3 } \ -# mountpoint{ /boot } \ -# . \ -# 500 10000 1000000000 ext3 \ -# method{ format } format{ } \ -# use_filesystem{ } filesystem{ ext3 } \ -# mountpoint{ / } \ -# . \ -# 64 512 300% linux-swap \ -# method{ swap } format{ } \ -# . - -#The preseed line that "selects finish" needs to be in a certain order in your preseed, the example-preseed does not follow this. -#http://ubuntuforums.org/archive/index.php/t-1504045.html - -# This makes partman automatically partition without confirmation, provided -# that you told it what to do using one of the methods above. -d-i partman/confirm_write_new_label boolean true -d-i partman/confirm boolean true -d-i partman/confirm_nooverwrite boolean true - - -### Base system installation -# Select the initramfs generator used to generate the initrd for 2.6 kernels. -#d-i base-installer/kernel/linux/initramfs-generators string yaird - -# The kernel image (meta) package to be installed; "none" can be used if no -# kernel is to be installed. -#d-i base-installer/kernel/image string linux-image-2.6-486 - -### Account setup -# Skip creation of a root account (normal user account will be able to -# use sudo). -d-i passwd/root-login boolean false -# Alternatively, to skip creation of a normal user account. -#d-i passwd/make-user boolean false - -# Root password, either in clear text -d-i passwd/root-password password vagrant -d-i passwd/root-password-again password vagrant -# or encrypted using an MD5 hash. -#d-i passwd/root-password-crypted password [MD5 hash] - -# To create a normal user account. -d-i passwd/user-fullname string Vagrant User -d-i passwd/username string vagrant -# Normal user's password, either in clear text -d-i passwd/user-password password vagrant -d-i passwd/user-password-again password vagrant -# or encrypted using an MD5 hash. -#d-i passwd/user-password-crypted password [MD5 hash] -# Create the first user with the specified UID instead of the default. -#d-i passwd/user-uid string 1010 -d-i user-setup/encrypt-home boolean false -d-i user-setup/allow-password-weak boolean true - -# The user account will be added to some standard initial groups. To -# override that, use this. -d-i passwd/user-default-groups string audio cdrom video admin - -### Apt setup -# You can choose to install non-free and contrib software. -#d-i apt-setup/non-free boolean true -#d-i apt-setup/contrib boolean true -# Uncomment this if you don't want to use a network mirror. -#d-i apt-setup/use_mirror boolean false -# Select which update services to use; define the mirrors to be used. -# Values shown below are the normal defaults. -#d-i apt-setup/services-select multiselect security, volatile -#d-i apt-setup/security_host string security.debian.org -#d-i apt-setup/volatile_host string volatile.debian.org - - -# By default the installer requires that repositories be authenticated -# using a known gpg key. This setting can be used to disable that -# authentication. Warning: Insecure, not recommended. -#d-i debian-installer/allow_unauthenticated string true - -### Package selection -tasksel tasksel/first multiselect standard -# If the desktop task is selected, install the kde and xfce desktops -# instead of the default gnome desktop. -#tasksel tasksel/desktop multiselect kde, xfce - -# Individual additional packages to install -d-i pkgsel/include string openssh-server ntp acpid sudo bzip2 rsync - -# Whether to upgrade packages after debootstrap. -# Allowed values: none, safe-upgrade, full-upgrade -d-i pkgsel/upgrade select none - -# Some versions of the installer can report back on what software you have -# installed, and what software you use. The default is not to report back, -# but sending reports helps the project determine what software is most -# popular and include it on CDs. -popularity-contest popularity-contest/participate boolean false - -### Boot loader installation -# Grub is the default boot loader (for x86). If you want lilo installed -# instead, uncomment this: -#d-i grub-installer/skip boolean true -# To also skip installing lilo, and install no bootloader, uncomment this -# too: -#d-i lilo-installer/skip boolean true - -# This is fairly safe to set, it makes grub install automatically to the MBR -# if no other operating system is detected on the machine. -d-i grub-installer/only_debian boolean true - -# This one makes grub-installer install to the MBR if it also finds some other -# OS, which is less safe as it might not be able to boot that other OS. -d-i grub-installer/with_other_os boolean true - -# Alternatively, if you want to install to a location other than the mbr, -# uncomment and edit these lines: -#d-i grub-installer/only_debian boolean false -#d-i grub-installer/with_other_os boolean false -#d-i grub-installer/bootdev string (hd0,0) -# To install grub to multiple disks: -#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0) - -# Optional password for grub, either in clear text -#d-i grub-installer/password password r00tme -#d-i grub-installer/password-again password r00tme -# or encrypted using an MD5 hash, see grub-md5-crypt(8). -#d-i grub-installer/password-crypted password [MD5 hash] - -### Finishing up the installation -# During installations from serial console, the regular virtual consoles -# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next -# line to prevent this. -#d-i finish-install/keep-consoles boolean true - -# Avoid that last message about the install being complete. -d-i finish-install/reboot_in_progress note - -# This will prevent the installer from ejecting the CD during the reboot, -# which is useful in some situations. -#d-i cdrom-detect/eject boolean false - -# This is how to make the installer shutdown when finished, but not -# reboot into the installed system. -#d-i debian-installer/exit/halt boolean true -# This will power off the machine instead of just halting it. -#d-i debian-installer/exit/poweroff boolean true - -### Preseeding other packages -# Depending on what software you choose to install, or if things go wrong -# during the installation process, it's possible that other questions may -# be asked. You can preseed those too, of course. To get a list of every -# possible question that could be asked during an install, do an -# installation, and then run these commands: -# debconf-get-selections --installer > file -# debconf-get-selections >> file - - -#### Advanced options -### Running custom commands during the installation -# d-i preseeding is inherently not secure. Nothing in the installer checks -# for attempts at buffer overflows or other exploits of the values of a -# preconfiguration file like this one. Only use preconfiguration files from -# trusted locations! To drive that home, and because it's generally useful, -# here's a way to run any shell command you'd like inside the installer, -# automatically. - -# This first command is run as early as possible, just after -# preseeding is read. -# Prevent packaged version of VirtualBox Guest Additions being installed: -d-i preseed/early_command string sed -i \ - '/in-target/idiscover(){/sbin/discover|grep -v VirtualBox;}' \ - /usr/lib/pre-pkgsel.d/20install-hwpackages - -# This command is run just before the install finishes, but when there is -# still a usable /target directory. You can chroot to /target and use it -# directly, or use the apt-install and in-target commands to easily install -# packages and run commands in the target system. |