diff options
Diffstat (limited to 'puppet/modules/sshd/templates/sshd_config')
15 files changed, 1614 insertions, 0 deletions
diff --git a/puppet/modules/sshd/templates/sshd_config/CentOS_5.erb b/puppet/modules/sshd/templates/sshd_config/CentOS_5.erb new file mode 120000 index 00000000..71b767a5 --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/CentOS_5.erb @@ -0,0 +1 @@ +CentOS_6.erb
\ No newline at end of file diff --git a/puppet/modules/sshd/templates/sshd_config/CentOS_6.erb b/puppet/modules/sshd/templates/sshd_config/CentOS_6.erb new file mode 100644 index 00000000..4593a91a --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/CentOS_6.erb @@ -0,0 +1,172 @@ +# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ + +# This is the sshd server system-wide configuration file. See +# sshd_config(5) for more information. + +# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin + +# The strategy used for options in the default sshd_config shipped with +# OpenSSH is to specify options with their default value where +# possible, but leave them commented. Uncommented options change a +# default value. + +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> +<%= s %> +<% end -%> + +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> +<% if port == 'off' -%> +#Port -- disabled by puppet +<% else -%> +Port <%= port %> +<% end -%> +<% end -%> + +# Use these options to restrict which interfaces/protocols sshd will bind to +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> +ListenAddress <%= address %> +<% end -%> + +# Disable legacy (protocol version 1) support in the server for new +# installations. In future the default will change to require explicit +# activation of protocol 1 +Protocol 2 + +# HostKey for protocol version 1 +#HostKey /etc/ssh/ssh_host_key +# HostKeys for protocol version 2 +#HostKey /etc/ssh/ssh_host_rsa_key +#HostKey /etc/ssh/ssh_host_dsa_key + +# Lifetime and size of ephemeral version 1 server key +#KeyRegenerationInterval 1h +#ServerKeyBits 1024 + +# Logging +# obsoletes QuietMode and FascistLogging +#SyslogFacility AUTH +SyslogFacility AUTHPRIV +#LogLevel INFO + +# Authentication: + +#LoginGraceTime 2m +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> + +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> + +#MaxAuthTries 6 + +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> +#AuthorizedKeysCommand none +#AuthorizedKeysCommandRunAs nobody + +# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> + +# similar for protocol version 2 +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> + +# Change to yes if you don't trust ~/.ssh/known_hosts for +# RhostsRSAAuthentication and HostbasedAuthentication +#IgnoreUserKnownHosts no + +# Don't read the user's ~/.rhosts and ~/.shosts files +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> + +# To disable tunneled clear text passwords, change to no here! +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> + +# To enable empty passwords, change to yes (NOT RECOMMENDED) +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> + +# Change to no to disable s/key passwords +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> + +# Kerberos options +#KerberosAuthentication no +#KerberosOrLocalPasswd yes +#KerberosTicketCleanup yes +#KerberosGetAFSToken no +#KerberosUseKuserok yes + +# GSSAPI options +#GSSAPIAuthentication no +#GSSAPICleanupCredentials yes + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +#UsePAM no +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> + +# Accept locale-related environment variables +AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES +AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT +AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE +AcceptEnv XMODIFIERS + +#AllowAgentForwarding yes +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> +#GatewayPorts no +#X11Forwarding no +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> +#X11DisplayOffset 10 +#X11UseLocalhost yes +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> +#PrintLastLog yes +#TCPKeepAlive yes +#UseLogin no +#UsePrivilegeSeparation yes +#PermitUserEnvironment no +#Compression delayed +#ClientAliveInterval 0 +#ClientAliveCountMax 3 +#ShowPatchLevel no +#UseDNS yes +#PidFile /var/run/sshd.pid +#MaxStartups 10:30:100 +#PermitTunnel no +#ChrootDirectory none + +# no default banner path +#Banner /some/path + +# override default of no subsystems +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/libexec/openssh/sftp-server' : s %> + +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> +AllowUsers <%= s %> +<% end -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> +AllowGroups <%= s %> +<%- end -%> + +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> +<% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> +KexAlgorithms curve25519-sha256@libssh.org +Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr +MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com +<% else -%> +Ciphers aes256-ctr +MACs hmac-sha1 +<% end -%> +<% end -%> + +# Example of overriding settings on a per-user basis +#Match User anoncvs +# X11Forwarding no +# AllowTcpForwarding no +# ForceCommand cvs server +# +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> +<%= s %> +<% end -%> diff --git a/puppet/modules/sshd/templates/sshd_config/CentOS_7.erb b/puppet/modules/sshd/templates/sshd_config/CentOS_7.erb new file mode 100644 index 00000000..f55fb9d0 --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/CentOS_7.erb @@ -0,0 +1,186 @@ +# $OpenBSD: sshd_config,v 1.90 2013/05/16 04:09:14 dtucker Exp $ + +# This is the sshd server system-wide configuration file. See +# sshd_config(5) for more information. + +# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin + +# The strategy used for options in the default sshd_config shipped with +# OpenSSH is to specify options with their default value where +# possible, but leave them commented. Uncommented options change a +# default value. + +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> +<%= s %> +<% end -%> + +# If you want to change the port on a SELinux system, you have to tell +# SELinux about this change. +# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER +# +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> +<% if port == 'off' -%> +#Port -- disabled by puppet +<% else -%> +Port <%= port %> +<% end -%> +<% end -%> +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> +ListenAddress <%= address %> +<% end -%> + +# The default requires explicit activation of protocol 1 +#Protocol 2 + +# HostKey for protocol version 1 +#HostKey /etc/ssh/ssh_host_key +# HostKeys for protocol version 2 +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> +HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key +<% end -%> + +# Lifetime and size of ephemeral version 1 server key +#KeyRegenerationInterval 1h +#ServerKeyBits 1024 + +# Ciphers and keying +#RekeyLimit default none + +# Logging +# obsoletes QuietMode and FascistLogging +#SyslogFacility AUTH +SyslogFacility AUTHPRIV +#LogLevel INFO + +# Authentication: + +#LoginGraceTime 2m +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> +#MaxAuthTries 6 +#MaxSessions 10 + +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> +#AuthorizedPrincipalsFile none +#AuthorizedKeysCommand none +#AuthorizedKeysCommandRunAs nobody + +# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> + +# similar for protocol version 2 +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> + +# Change to yes if you don't trust ~/.ssh/known_hosts for +# RhostsRSAAuthentication and HostbasedAuthentication +#IgnoreUserKnownHosts no + +# Don't read the user's ~/.rhosts and ~/.shosts files +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> + +# To disable tunneled clear text passwords, change to no here! +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> + +# To enable empty passwords, change to yes (NOT RECOMMENDED) +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> + +# Change to no to disable s/key passwords +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> + +# Kerberos options +#KerberosAuthentication no +#KerberosOrLocalPasswd yes +#KerberosTicketCleanup yes +#KerberosGetAFSToken no +#KerberosUseKuserok yes + +# GSSAPI options +GSSAPIAuthentication no +GSSAPICleanupCredentials yes +#GSSAPIStrictAcceptorCheck yes +#GSSAPIKeyExchange no + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +# WARNING: 'UsePAM no' is not supported in Red Hat Enterprise Linux and may cause several +# problems. +#UsePAM no +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> + +#AllowAgentForwarding yes +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> +#GatewayPorts no +#X11Forwarding no +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> +#X11DisplayOffset 10 +#X11UseLocalhost yes +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> +#PrintLastLog yes +#TCPKeepAlive yes +#UseLogin no +UsePrivilegeSeparation sandbox # Default for new installations. +#PermitUserEnvironment no +#Compression delayed +#ClientAliveInterval 0 +#ClientAliveCountMax 3 +#ShowPatchLevel no +#UseDNS yes +#PidFile /var/run/sshd.pid +#MaxStartups 10:30:100 +#PermitTunnel no +#ChrootDirectory none +#VersionAddendum none + +# no default banner path +#Banner none + +# Accept locale-related environment variables +AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES +AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT +AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE +AcceptEnv XMODIFIERS + + +# override default of no subsystems +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/libexec/openssh/sftp-server' : s %> + +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> +AllowUsers <%= s %> +<% end -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> +AllowGroups <%= s %> +<%- end -%> + +# Uncomment this if you want to use .local domain +#Host *.local +# CheckHostIP no + +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> +<% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> +KexAlgorithms curve25519-sha256@libssh.org +Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr +MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com +<% else -%> +Ciphers aes256-ctr +MACs hmac-sha1 +<% end -%> +<% end -%> + +# Example of overriding settings on a per-user basis +#Match User anoncvs +# X11Forwarding no +# AllowTcpForwarding no +# ForceCommand cvs server + +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> +<%= s %> +<% end -%> diff --git a/puppet/modules/sshd/templates/sshd_config/Debian_jessie.erb b/puppet/modules/sshd/templates/sshd_config/Debian_jessie.erb new file mode 100644 index 00000000..91dbfff0 --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/Debian_jessie.erb @@ -0,0 +1,124 @@ +# This file is managed by Puppet, all local modifications will be overwritten +# +# Package generated configuration file +# See the sshd_config(5) manpage for details + +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> +<%= s %> +<% end -%> + +# What ports, IPs and protocols we listen for +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> +<% if port == 'off' -%> +#Port -- disabled by puppet +<% else -%> +Port <%= port %> +<% end -%> +<% end -%> + +# Use these options to restrict which interfaces/protocols sshd will bind to +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> +ListenAddress <%= address %> +<% end -%> +Protocol 2 +# HostKeys for protocol version 2 +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> +HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key +<% end -%> +#Privilege Separation is turned on for security +UsePrivilegeSeparation yes + +# Lifetime and size of ephemeral version 1 server key +KeyRegenerationInterval 3600 +ServerKeyBits 1024 + +# Logging +SyslogFacility AUTH +LogLevel INFO + +# Authentication: +LoginGraceTime 120 +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> + +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> + +# Don't read the user's ~/.rhosts and ~/.shosts files +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> +# For this to work you will also need host keys in /etc/ssh_known_hosts +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> +# similar for protocol version 2 +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> +# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication +#IgnoreUserKnownHosts yes + +# To enable empty passwords, change to yes (NOT RECOMMENDED) +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> + +# Change to yes to enable challenge-response passwords (beware issues with +# some PAM modules and threads) +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> + +# Change to no to disable tunnelled clear text passwords +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> + +# Kerberos options +KerberosAuthentication <%= scope.lookupvar('::sshd::kerberos_authentication') %> +#KerberosGetAFSToken no +KerberosOrLocalPasswd <%= scope.lookupvar('::sshd::kerberos_orlocalpasswd') %> +KerberosTicketCleanup <%= scope.lookupvar('::sshd::kerberos_ticketcleanup') %> + +# GSSAPI options +GSSAPIAuthentication <%= scope.lookupvar('::sshd::gssapi_authentication') %> +GSSAPICleanupCredentials <%= scope.lookupvar('::sshd::gssapi_cleanupcredentials') %> + +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> +X11DisplayOffset 10 +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> +PrintLastLog yes +TCPKeepAlive yes +#UseLogin no + +#MaxStartups 10:30:60 +#Banner /etc/issue.net +# do not reveal debian version (default is yes) +DebianBanner no + +# Allow client to pass locale environment variables +AcceptEnv LANG LC_* + +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> + +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> + +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> + +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> +AllowUsers <%= s %> +<% end -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> +AllowGroups <%= s %> +<%- end -%> + +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> +KexAlgorithms curve25519-sha256@libssh.org +Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr +MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com +<% end -%> + +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> +<%= s %> +<% end -%> diff --git a/puppet/modules/sshd/templates/sshd_config/Debian_sid.erb b/puppet/modules/sshd/templates/sshd_config/Debian_sid.erb new file mode 100644 index 00000000..91dbfff0 --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/Debian_sid.erb @@ -0,0 +1,124 @@ +# This file is managed by Puppet, all local modifications will be overwritten +# +# Package generated configuration file +# See the sshd_config(5) manpage for details + +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> +<%= s %> +<% end -%> + +# What ports, IPs and protocols we listen for +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> +<% if port == 'off' -%> +#Port -- disabled by puppet +<% else -%> +Port <%= port %> +<% end -%> +<% end -%> + +# Use these options to restrict which interfaces/protocols sshd will bind to +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> +ListenAddress <%= address %> +<% end -%> +Protocol 2 +# HostKeys for protocol version 2 +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> +HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key +<% end -%> +#Privilege Separation is turned on for security +UsePrivilegeSeparation yes + +# Lifetime and size of ephemeral version 1 server key +KeyRegenerationInterval 3600 +ServerKeyBits 1024 + +# Logging +SyslogFacility AUTH +LogLevel INFO + +# Authentication: +LoginGraceTime 120 +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> + +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> + +# Don't read the user's ~/.rhosts and ~/.shosts files +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> +# For this to work you will also need host keys in /etc/ssh_known_hosts +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> +# similar for protocol version 2 +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> +# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication +#IgnoreUserKnownHosts yes + +# To enable empty passwords, change to yes (NOT RECOMMENDED) +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> + +# Change to yes to enable challenge-response passwords (beware issues with +# some PAM modules and threads) +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> + +# Change to no to disable tunnelled clear text passwords +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> + +# Kerberos options +KerberosAuthentication <%= scope.lookupvar('::sshd::kerberos_authentication') %> +#KerberosGetAFSToken no +KerberosOrLocalPasswd <%= scope.lookupvar('::sshd::kerberos_orlocalpasswd') %> +KerberosTicketCleanup <%= scope.lookupvar('::sshd::kerberos_ticketcleanup') %> + +# GSSAPI options +GSSAPIAuthentication <%= scope.lookupvar('::sshd::gssapi_authentication') %> +GSSAPICleanupCredentials <%= scope.lookupvar('::sshd::gssapi_cleanupcredentials') %> + +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> +X11DisplayOffset 10 +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> +PrintLastLog yes +TCPKeepAlive yes +#UseLogin no + +#MaxStartups 10:30:60 +#Banner /etc/issue.net +# do not reveal debian version (default is yes) +DebianBanner no + +# Allow client to pass locale environment variables +AcceptEnv LANG LC_* + +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> + +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> + +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> + +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> +AllowUsers <%= s %> +<% end -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> +AllowGroups <%= s %> +<%- end -%> + +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> +KexAlgorithms curve25519-sha256@libssh.org +Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr +MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com +<% end -%> + +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> +<%= s %> +<% end -%> diff --git a/puppet/modules/sshd/templates/sshd_config/Debian_squeeze.erb b/puppet/modules/sshd/templates/sshd_config/Debian_squeeze.erb new file mode 100644 index 00000000..649b320a --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/Debian_squeeze.erb @@ -0,0 +1,127 @@ +# This file is managed by Puppet, all local modifications will be overwritten +# +# Package generated configuration file +# See the sshd(8) manpage for details + +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> +<%= s %> +<% end -%> + +# What ports, IPs and protocols we listen for +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> +<% if port == 'off' -%> +#Port -- disabled by puppet +<% else -%> +Port <%= port %> +<% end -%> +<% end -%> + +# Use these options to restrict which interfaces/protocols sshd will bind to +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> +ListenAddress <%= address %> +<% end -%> +Protocol 2 +# HostKeys for protocol version 2 +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> +HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key +<% end -%> + +#Privilege Separation is turned on for security +UsePrivilegeSeparation yes + +# Lifetime and size of ephemeral version 1 server key +KeyRegenerationInterval 3600 +ServerKeyBits 768 + +# Logging +SyslogFacility AUTH +LogLevel INFO + +# Authentication: +LoginGraceTime 120 +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> + +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> + +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> + +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> + +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> + +# Don't read the user's ~/.rhosts and ~/.shosts files +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> +# For this to work you will also need host keys in /etc/ssh_known_hosts +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> +# similar for protocol version 2 +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> +# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication +#IgnoreUserKnownHosts yes + +# To enable empty passwords, change to yes (NOT RECOMMENDED) +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> + +# Change to yes to enable challenge-response passwords (beware issues with +# some PAM modules and threads) +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> + +# To disable tunneled clear text passwords, change to no here! +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> + +# Kerberos options +KerberosAuthentication <%= scope.lookupvar('::sshd::kerberos_authentication') %> +KerberosOrLocalPasswd <%= scope.lookupvar('::sshd::kerberos_orlocalpasswd') %> +KerberosTicketCleanup <%= scope.lookupvar('::sshd::kerberos_ticketcleanup') %> + +# GSSAPI options +GSSAPIAuthentication <%= scope.lookupvar('::sshd::gssapi_authentication') %> +GSSAPICleanupCredentials <%= scope.lookupvar('::sshd::gssapi_cleanupcredentials') %> + +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> +X11DisplayOffset 10 +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> +PrintLastLog yes +TCPKeepAlive yes + +#UseLogin no + +#MaxStartups 10:30:60 +#Banner /etc/issue.net +# do not reveal debian version (default is yes) +DebianBanner no + +# Allow client to pass locale environment variables +AcceptEnv LANG LC_* + +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> + +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> + +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> + +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> +AllowUsers <%= s %> +<% end -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> +AllowGroups <%= s %> +<%- end -%> + +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> +Ciphers aes256-ctr +MACs hmac-sha2-512 +<% end -%> + +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> +<%= s %> +<% end -%> diff --git a/puppet/modules/sshd/templates/sshd_config/Debian_wheezy.erb b/puppet/modules/sshd/templates/sshd_config/Debian_wheezy.erb new file mode 100644 index 00000000..bcb15286 --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/Debian_wheezy.erb @@ -0,0 +1,132 @@ +# This file is managed by Puppet, all local modifications will be overwritten +# +# Package generated configuration file +# See the sshd(8) manpage for details + +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> +<%= s %> +<% end -%> + +# What ports, IPs and protocols we listen for +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> +<% if port == 'off' -%> +#Port -- disabled by puppet +<% else -%> +Port <%= port %> +<% end -%> +<% end -%> + +# Use these options to restrict which interfaces/protocols sshd will bind to +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> +ListenAddress <%= address %> +<% end -%> +Protocol 2 +# HostKeys for protocol version 2 +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> +HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key +<% end -%> +#Privilege Separation is turned on for security +UsePrivilegeSeparation yes + +# Lifetime and size of ephemeral version 1 server key +KeyRegenerationInterval 3600 +ServerKeyBits 768 + +# Logging +SyslogFacility AUTH +LogLevel INFO + +# Authentication: +LoginGraceTime 120 +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> + +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> + +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> + +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> + +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> + +# Don't read the user's ~/.rhosts and ~/.shosts files +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> +# For this to work you will also need host keys in /etc/ssh_known_hosts +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> +# similar for protocol version 2 +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> +# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication +#IgnoreUserKnownHosts yes + +# To enable empty passwords, change to yes (NOT RECOMMENDED) +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> + +# Change to yes to enable challenge-response passwords (beware issues with +# some PAM modules and threads) +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> + +# To disable tunneled clear text passwords, change to no here! +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> + +# Kerberos options +KerberosAuthentication <%= scope.lookupvar('::sshd::kerberos_authentication') %> +KerberosOrLocalPasswd <%= scope.lookupvar('::sshd::kerberos_orlocalpasswd') %> +KerberosTicketCleanup <%= scope.lookupvar('::sshd::kerberos_ticketcleanup') %> + +# GSSAPI options +GSSAPIAuthentication <%= scope.lookupvar('::sshd::gssapi_authentication') %> +GSSAPICleanupCredentials <%= scope.lookupvar('::sshd::gssapi_cleanupcredentials') %> + +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> +X11DisplayOffset 10 +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> +PrintLastLog yes +TCPKeepAlive yes + +#UseLogin no + +#MaxStartups 10:30:60 +#Banner /etc/issue.net +# do not reveal debian version (default is yes) +DebianBanner no + +# Allow client to pass locale environment variables +AcceptEnv LANG LC_* + +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> + +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> + +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> + +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> +AllowUsers <%= s %> +<% end -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> +AllowGroups <%= s %> +<%- end -%> + +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> +<% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> +KexAlgorithms curve25519-sha256@libssh.org +Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr +MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com +<% else -%> +Ciphers aes256-ctr +MACs hmac-sha2-512 +<% end -%> +<% end -%> + +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> +<%= s %> +<% end -%> diff --git a/puppet/modules/sshd/templates/sshd_config/FreeBSD.erb b/puppet/modules/sshd/templates/sshd_config/FreeBSD.erb new file mode 100644 index 00000000..5298ade9 --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/FreeBSD.erb @@ -0,0 +1,168 @@ +# $OpenBSD: sshd_config,v 1.81 2009/10/08 14:03:41 markus Exp $ +# $FreeBSD: src/crypto/openssh/sshd_config,v 1.49.2.2.2.1 2010/06/14 02:09:06 kensmith Exp $ + +# This is the sshd server system-wide configuration file. See +# sshd_config(5) for more information. + +# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin + +# The strategy used for options in the default sshd_config shipped with +# OpenSSH is to specify options with their default value where +# possible, but leave them commented. Uncommented options change a +# default value. + +# Note that some of FreeBSD's defaults differ from OpenBSD's, and +# FreeBSD has a few additional options. + +#VersionAddendum FreeBSD-20100308 + +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> +<%= s %> +<% end -%> + +# What ports, IPs and protocols we listen for +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> +<% if port == 'off' -%> +#Port -- disabled by puppet +<% else -%> +Port <%= port %> +<% end -%> +<% end -%> + +#AddressFamily any +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> +ListenAddress <%= address %> +<% end -%> + +# The default requires explicit activation of protocol 1 +Protocol 2 + +# HostKey for protocol version 1 +#HostKey /etc/ssh/ssh_host_key +# HostKeys for protocol version 2 +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> +HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key +<% end -%> + +# Lifetime and size of ephemeral version 1 server key +#KeyRegenerationInterval 1h +#ServerKeyBits 1024 + +# Logging +# obsoletes QuietMode and FascistLogging +SyslogFacility AUTH +LogLevel INFO + +# Authentication: + +LoginGraceTime 600 +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> + +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> + +#MaxAuthTries 6 +#MaxSessions 10 + +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> + +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> + +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> + +# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> + +# similar for protocol version 2 +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> + +# Change to yes if you don't trust ~/.ssh/known_hosts for +# RhostsRSAAuthentication and HostbasedAuthentication +#IgnoreUserKnownHosts no +# Don't read the user's ~/.rhosts and ~/.shosts files +#IgnoreRhosts yes + +# Change to yes to enable built-in password authentication. +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> + +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> + +# Change to no to disable PAM authentication +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> + +# Kerberos options +KerberosAuthentication <%= scope.lookupvar('::sshd::kerberos_authentication') %> +KerberosOrLocalPasswd <%= scope.lookupvar('::sshd::kerberos_orlocalpasswd') %> +KerberosTicketCleanup <%= scope.lookupvar('::sshd::kerberos_ticketcleanup') %> + +# GSSAPI options +GSSAPIAuthentication <%= scope.lookupvar('::sshd::gssapi_authentication') %> +GSSAPICleanupCredentials <%= scope.lookupvar('::sshd::gssapi_cleanupcredentials') %> + +# Set this to 'no' to disable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> + +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> + +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> + +#GatewayPorts no +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> + +X11DisplayOffset 10 +#X11UseLocalhost yes +PrintMotd <%= sshd_print_motd %> +#PrintLastLog yes +TCPKeepAlive yes +#UseLogin no +#UsePrivilegeSeparation yes +#PermitUserEnvironment no +#Compression delayed +#ClientAliveInterval 0 +#ClientAliveCountMax 3 +#UseDNS yes +#PidFile /var/run/sshd.pid +#MaxStartups 10 +#PermitTunnel no +#ChrootDirectory none + +# no default banner path +#Banner none + +# override default of no subsystems +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/libexec/sftp-server' : s %> + +# Example of overriding settings on a per-user basis +#Match User anoncvs +# X11Forwarding no +# AllowTcpForwarding no +# ForceCommand cvs server + +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> +AllowUsers <%= s %> +<% end -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> +AllowGroups <%= s %> +<%- end -%> + +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> +<% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> +KexAlgorithms curve25519-sha256@libssh.org +Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr +MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com +<% else -%> +Ciphers aes256-ctr +MACs hmac-sha1 +<% end -%> +<% end -%> + +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> +<%= s %> +<% end -%> diff --git a/puppet/modules/sshd/templates/sshd_config/Gentoo.erb b/puppet/modules/sshd/templates/sshd_config/Gentoo.erb new file mode 100644 index 00000000..022a26e7 --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/Gentoo.erb @@ -0,0 +1,164 @@ +# $OpenBSD: sshd_config,v 1.75 2007/03/19 01:01:29 djm Exp $ + +# This is the sshd server system-wide configuration file. See +# sshd_config(5) for more information. + +# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin + +# The strategy used for options in the default sshd_config shipped with +# OpenSSH is to specify options with their default value where +# possible, but leave them commented. Uncommented options change a +# default value. + +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> +<%= s %> +<% end -%> + +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> +<% if port == 'off' -%> +#Port -- disabled by puppet +<% else -%> +Port <%= port %> +<% end -%> +<% end -%> + +# Use these options to restrict which interfaces/protocols sshd will bind to +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> +ListenAddress <%= address %> +<% end -%> +#AddressFamily any + +# Disable legacy (protocol version 1) support in the server for new +# installations. In future the default will change to require explicit +# activation of protocol 1 +Protocol 2 + +# HostKey for protocol version 1 +#HostKey /etc/ssh/ssh_host_key +# HostKeys for protocol version 2 +#HostKey /etc/ssh/ssh_host_rsa_key +#HostKey /etc/ssh/ssh_host_dsa_key + +# Lifetime and size of ephemeral version 1 server key +#KeyRegenerationInterval 1h +#ServerKeyBits 768 + +# Logging +# obsoletes QuietMode and FascistLogging +#SyslogFacility AUTH +#LogLevel INFO + +# Authentication: + +#LoginGraceTime 2m +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> + +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> + +#MaxAuthTries 6 + +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> + +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> + +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> + +# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> + +# similar for protocol version 2 +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> + +# Change to yes if you don't trust ~/.ssh/known_hosts for +# RhostsRSAAuthentication and HostbasedAuthentication +#IgnoreUserKnownHosts no + +# Don't read the user's ~/.rhosts and ~/.shosts files +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> + +# To disable tunneled clear text passwords, change to no here! +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> + +# To enable empty passwords, change to yes (NOT RECOMMENDED) +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> + +# Change to no to disable s/key passwords +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> + +# Kerberos options +#KerberosAuthentication no +#KerberosOrLocalPasswd yes +#KerberosTicketCleanup yes +#KerberosGetAFSToken no + +# GSSAPI options +#GSSAPIAuthentication no +#GSSAPICleanupCredentials yes +#GSSAPIStrictAcceptorCheck yes +#GSSAPIKeyExchange no + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> + +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> + +#GatewayPorts no +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> +#X11DisplayOffset 10 +#X11UseLocalhost yes +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> +#PrintLastLog yes +#TCPKeepAlive yes +#UseLogin no +#UsePrivilegeSeparation yes +#PermitUserEnvironment no +#Compression delayed +#ClientAliveInterval 0 +#ClientAliveCountMax 3 +#UseDNS yes +#PidFile /var/run/sshd.pid +#MaxStartups 10 +#PermitTunnel no + +# no default banner path +#Banner /some/path + +# override default of no subsystems +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/misc/sftp-server' : s %> + +# Example of overriding settings on a per-user basis +#Match User anoncvs +# X11Forwarding no +# AllowTcpForwarding no +# ForceCommand cvs server + +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> +AllowUsers <%= s %> +<% end -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> +AllowGroups <%= s %> +<%- end -%> + +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> +<% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> +KexAlgorithms curve25519-sha256@libssh.org +Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr +MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com +<% else -%> +Ciphers aes256-ctr +MACs hmac-sha1 +<% end -%> +<% end -%> + +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> +<%= s %> +<% end -%> + diff --git a/puppet/modules/sshd/templates/sshd_config/OpenBSD.erb b/puppet/modules/sshd/templates/sshd_config/OpenBSD.erb new file mode 100644 index 00000000..db730300 --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/OpenBSD.erb @@ -0,0 +1,144 @@ +# $OpenBSD: sshd_config,v 1.74 2006/07/19 13:07:10 dtucker Exp $ + +# This is the sshd server system-wide configuration file. See +# sshd_config(5) for more information. + +# The strategy used for options in the default sshd_config shipped with +# OpenSSH is to specify options with their default value where +# possible, but leave them commented. Uncommented options change a +# default value. + +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> +<%= s %> +<% end -%> + +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> +<% if port == 'off' -%> +#Port -- disabled by puppet +<% else -%> +Port <%= port %> +<% end -%> +<% end -%> + +# Use these options to restrict which interfaces/protocols sshd will bind to +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> +ListenAddress <%= address %> +<% end -%> +#Protocol 2,1 +#AddressFamily any + +# HostKey for protocol version 1 +#HostKey /etc/ssh/ssh_host_key +# HostKeys for protocol version 2 +#HostKey /etc/ssh/ssh_host_rsa_key +#HostKey /etc/ssh/ssh_host_dsa_key + +# Lifetime and size of ephemeral version 1 server key +#KeyRegenerationInterval 1h +#ServerKeyBits 768 + +# Logging +# obsoletes QuietMode and FascistLogging +#SyslogFacility AUTH +#LogLevel INFO + +# Authentication: + +#LoginGraceTime 2m +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> + +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> + +#MaxAuthTries 6 + +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> + +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> + +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> + +# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> + +# similar for protocol version 2 +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> + +# Change to yes if you don't trust ~/.ssh/known_hosts for +# RhostsRSAAuthentication and HostbasedAuthentication +#IgnoreUserKnownHosts no + +# Don't read the user's ~/.rhosts and ~/.shosts files +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> + +# To disable tunneled clear text passwords, change to no here! +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> + +# To enable empty passwords, change to yes (NOT RECOMMENDED) +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> + +# Change to no to disable s/key passwords +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> + +# Kerberos options +#KerberosAuthentication no +#KerberosOrLocalPasswd yes +#KerberosTicketCleanup yes +#KerberosGetAFSToken no + +# GSSAPI options +#GSSAPIAuthentication no +#GSSAPICleanupCredentials yes + +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> + +#GatewayPorts no +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> +#X11DisplayOffset 10 +#X11UseLocalhost yes +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> +#PrintLastLog yes +#TCPKeepAlive yes +#UseLogin no +#UsePrivilegeSeparation yes +#PermitUserEnvironment no +#Compression delayed +#ClientAliveInterval 0 +#ClientAliveCountMax 3 +#UseDNS yes +#PidFile /var/run/sshd.pid +#MaxStartups 10 +#PermitTunnel no + +# no default banner path +#Banner /some/path + +# override default of no subsystems +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/libexec/sftp-server' : s %> + +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> +AllowUsers <%= s %> +<% end -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> +AllowGroups <%= s %> +<%- end -%> + +# Example of overriding settings on a per-user basis +#Match User anoncvs +# X11Forwarding no +# AllowTcpForwarding no +# ForceCommand cvs server + +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> +<% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> +KexAlgorithms curve25519-sha256@libssh.org +Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr +MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com +<% else -%> +Ciphers aes256-ctr +MACs hmac-sha1 +<% end -%> +<% end -%> + +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> +<%= s %> +<% end -%> diff --git a/puppet/modules/sshd/templates/sshd_config/Ubuntu.erb b/puppet/modules/sshd/templates/sshd_config/Ubuntu.erb new file mode 100644 index 00000000..a326ab87 --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/Ubuntu.erb @@ -0,0 +1,133 @@ +# This file is managed by Puppet, all local modifications will be overwritten +# +# Package generated configuration file +# See the sshd(8) manpage for details + +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> +<%= s %> +<% end -%> + +# What ports, IPs and protocols we listen for +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> +<% if port == 'off' -%> +#Port -- disabled by puppet +<% else -%> +Port <%= port %> +<% end -%> +<% end -%> + +# Use these options to restrict which interfaces/protocols sshd will bind to +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> +ListenAddress <%= address %> +<% end -%> +Protocol 2 +# HostKeys for protocol version 2 +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> +HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key +<% end -%> + +#Privilege Separation is turned on for security +UsePrivilegeSeparation yes + +# Lifetime and size of ephemeral version 1 server key +KeyRegenerationInterval 3600 +ServerKeyBits 768 + +# Logging +SyslogFacility AUTH +LogLevel INFO + +# Authentication: +LoginGraceTime 120 +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> + +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> + +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> + +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> + +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> + +# Don't read the user's ~/.rhosts and ~/.shosts files +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> +# For this to work you will also need host keys in /etc/ssh_known_hosts +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> +# similar for protocol version 2 +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> +# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication +#IgnoreUserKnownHosts yes + +# To enable empty passwords, change to yes (NOT RECOMMENDED) +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> + +# Change to yes to enable challenge-response passwords (beware issues with +# some PAM modules and threads) +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> + +# To disable tunneled clear text passwords, change to no here! +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> + +# Kerberos options +KerberosAuthentication <%= scope.lookupvar('::sshd::kerberos_authentication') %> +KerberosOrLocalPasswd <%= scope.lookupvar('::sshd::kerberos_orlocalpasswd') %> +KerberosTicketCleanup <%= scope.lookupvar('::sshd::kerberos_ticketcleanup') %> + +# GSSAPI options +GSSAPIAuthentication <%= scope.lookupvar('::sshd::gssapi_authentication') %> +GSSAPICleanupCredentials <%= scope.lookupvar('::sshd::gssapi_cleanupcredentials') %> + +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> +X11DisplayOffset 10 +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> +PrintLastLog yes +TCPKeepAlive yes + +#UseLogin no + +#MaxStartups 10:30:60 +#Banner /etc/issue.net +# do not reveal debian version (default is yes) +DebianBanner no + +# Allow client to pass locale environment variables +AcceptEnv LANG LC_* + +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> + +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> + +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> + +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> +AllowUsers <%= s %> +<% end -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> +AllowGroups <%= s %> +<%- end -%> + +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> +<% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> +KexAlgorithms curve25519-sha256@libssh.org +Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr +MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com +<% else -%> +Ciphers aes256-ctr +MACs hmac-sha1 +<% end -%> +<% end -%> + +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> +<%= s %> +<% end -%> diff --git a/puppet/modules/sshd/templates/sshd_config/Ubuntu_lucid.erb b/puppet/modules/sshd/templates/sshd_config/Ubuntu_lucid.erb new file mode 100644 index 00000000..be7c56d0 --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/Ubuntu_lucid.erb @@ -0,0 +1,136 @@ +# Package generated configuration file +# See the sshd(8) manpage for details + +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> +<%= s %> +<% end -%> + +# What ports, IPs and protocols we listen for +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> +<% if port == 'off' -%> +#Port -- disabled by puppet +<% else -%> +Port <%= port %> +<% end -%> +<% end -%> + +# Use these options to restrict which interfaces/protocols sshd will bind to +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> +ListenAddress <%= address %> +<% end -%> +Protocol 2 +# HostKeys for protocol version 2 +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> +HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key +<% end -%> + +#Privilege Separation is turned on for security +UsePrivilegeSeparation yes + +# ...but breaks Pam auth via kbdint, so we have to turn it off +# Use PAM authentication via keyboard-interactive so PAM modules can +# properly interface with the user (off due to PrivSep) +#PAMAuthenticationViaKbdInt no +# Lifetime and size of ephemeral version 1 server key +KeyRegenerationInterval 3600 +ServerKeyBits 768 + +# Logging +SyslogFacility AUTH +LogLevel INFO + +# Authentication: +LoginGraceTime 600 +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> + +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> + +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> + +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> + +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> + +# For this to work you will also need host keys in /etc/ssh_known_hosts +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> + +# Don't read the user's ~/.rhosts and ~/.shosts files +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> + +# similar for protocol version 2 +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> + +# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication +#IgnoreUserKnownHosts yes + +# To enable empty passwords, change to yes (NOT RECOMMENDED) +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> + +# Change to no to disable s/key passwords +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> + +# To disable tunneled clear text passwords, change to no here! +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> + +# To change Kerberos options +#KerberosAuthentication no +#KerberosOrLocalPasswd yes +#AFSTokenPassing no +#KerberosTicketCleanup no + +# Kerberos TGT Passing does only work with the AFS kaserver +#KerberosTgtPassing yes + +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> +X11DisplayOffset 10 +KeepAlive yes +#UseLogin no + +#MaxStartups 10:30:60 +#Banner /etc/issue.net +# do not reveal debian version (default is yes) +DebianBanner no +#ReverseMappingCheck yes + +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> + +HostbasedUsesNameFromPacketOnly yes + +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> + +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> + +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> +AllowUsers <%= s %> +<% end -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> +AllowGroups <%= s %> +<%- end -%> + +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> + +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> +<% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> +KexAlgorithms curve25519-sha256@libssh.org +Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr +MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com +<% else -%> +Ciphers aes256-ctr +MACs hmac-sha1 +<% end -%> +<% end -%> + +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> +<%= s %> +<% end -%> diff --git a/puppet/modules/sshd/templates/sshd_config/Ubuntu_oneiric.erb b/puppet/modules/sshd/templates/sshd_config/Ubuntu_oneiric.erb new file mode 120000 index 00000000..ccfb67c8 --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/Ubuntu_oneiric.erb @@ -0,0 +1 @@ +Ubuntu_lucid.erb
\ No newline at end of file diff --git a/puppet/modules/sshd/templates/sshd_config/Ubuntu_precise.erb b/puppet/modules/sshd/templates/sshd_config/Ubuntu_precise.erb new file mode 120000 index 00000000..6502bfce --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/Ubuntu_precise.erb @@ -0,0 +1 @@ +Ubuntu.erb
\ No newline at end of file diff --git a/puppet/modules/sshd/templates/sshd_config/XenServer_xenenterprise.erb b/puppet/modules/sshd/templates/sshd_config/XenServer_xenenterprise.erb new file mode 120000 index 00000000..71b767a5 --- /dev/null +++ b/puppet/modules/sshd/templates/sshd_config/XenServer_xenenterprise.erb @@ -0,0 +1 @@ +CentOS_6.erb
\ No newline at end of file |