diff options
Diffstat (limited to 'puppet/modules/sshd/README.md')
| m--------- | puppet/modules/sshd | 0 | ||||
| -rw-r--r-- | puppet/modules/sshd/README.md | 247 |
2 files changed, 247 insertions, 0 deletions
diff --git a/puppet/modules/sshd b/puppet/modules/sshd deleted file mode 160000 -Subproject 76f4f872f81209a52df2205fd88b5619df58f00 diff --git a/puppet/modules/sshd/README.md b/puppet/modules/sshd/README.md new file mode 100644 index 00000000..77e4d29b --- /dev/null +++ b/puppet/modules/sshd/README.md @@ -0,0 +1,247 @@ +# Puppet SSH Module + +[](https://travis-ci.org/duritong/puppet-sshd) + +This puppet module manages OpenSSH configuration and services. + +**!! Upgrade Notice (05/2015) !!** + +The hardened_ssl parameter name was changed to simply 'hardened'. + +**!! Upgrade Notice (01/2013) !!** + +This module now uses parameterized classes, where it used global variables +before. So please whatch out before pulling, you need to change the +class declarations in your manifest ! + + +### Dependencies + +This module requires puppet => 2.6, and the following modules are required +pre-dependencies: + +- [puppetlabs/stdlib](https://github.com/puppetlabs/puppetlabs-stdlib) >= 2.x + +## OpenSSH Server + +On a node where you wish to have an openssh server installed, you should +include + +```puppet +class { 'sshd': } +``` + +on that node. If you need to configure any aspects of sshd_config, set the variables before the include. Or you can adjust many parameters: + +```puppet +class { 'sshd': + ports => [ 20002 ], + permit_root_login => 'no', +} +``` + +See Configurable Variables below for what you can set. + +### Nagios + +To have nagios checks setup automatically for sshd services, simply set +`manage_nagios` to `true` for that class. If you want to disable ssh +nagios checking for a particular node (such as when ssh is firewalled), then you +can set the class parameter `nagios_check_ssh` to `false` and that node will not be +monitored. + +Nagios will automatically check the ports defined in `ports`, and the +hostname specified by `nagios_check_ssh_hostname`. + +Note that if you need to use some specific logic to decide whether or not to +create a nagios service check, you should set $manage_nagios to false, and +use sshd::nagios from within your own manifests. You'll also need to manually +specify the port to that define. By default, if the $port parameter is not +specified, it will use the resource name as the port (e.g. if you call it like +this: `sshd::nagios { '22': }` ) + +NOTE: this requires that you are using the shared-nagios puppet module which +supports the nagios native types via `nagios::service`: + +https://gitlab.com/shared-puppet-modules-group/sshd + +### Firewall + +If you wish to have firewall rules setup automatically for you, using shorewall, +you will need to set: `use_shorewall => true`. The `ports` that you have +specified will automatically be used. + +NOTE: This requires that you are using the shared-shorewall puppet module: +git://labs.riseup.net/shared-shorewall + + +### Configurable variables + +Configuration of sshd is strict, and may not fit all needs, however there are a +number of variables that you can consider configuring. The defaults are set to +the distribution shipped sshd_config file defaults. + +To set any of these variables, simply set them as variables in your manifests, +before the class is included, for example: + +```puppet +class {'sshd': + listen_address => ['10.0.0.1', '192.168.0.1'], + use_pam => yes +} +``` + +If you need to install a version of the ssh daemon or client package other than +the default one that would be installed by `ensure => installed`, then you can +set the following variables: + +```puppet +class {'sshd': + ensure_version => "1:5.2p2-6" +} +``` + +The following is a list of the currently available variables: + + - `listen_address` + specify the addresses sshd should listen on set this to `['10.0.0.1', '192.168.0.1']` to have it listen on both addresses, or leave it unset to listen on all Default: empty -> results in listening on `0.0.0.0` + - `allowed_users` + list of usernames separated by spaces. set this for example to `"foobar + root"` to ensure that only user foobar and root might login. Default: empty + -> no restriction is set + - `allowed_groups` + list of groups separated by spaces. set this for example to `"wheel sftponly"` + to ensure that only users in the groups wheel and sftponly might login. + Default: empty -> no restriction is set Note: This is set after + `allowed_users`, take care of the behaviour if you use these 2 options + together. + - `use_pam` if you want to use pam or not for authenticaton. Values: + - `no` (default) + - `yes` + - `permit_root_login` If you want to allow root logins or not. Valid values: + - `yes` + - `no` + - `without-password` (default) + - `forced-commands-only` + - `password_authentication` + If you want to enable password authentication or not. Valid values: + - `yes` + - `no` (default) + - `kerberos_authentication` + If you want the password that is provided by the user to be validated + through the Kerberos KDC. To use this option the server needs a Kerberos + servtab which allows the verification of the KDC's identity. Valid values: + - `yes` + - `no` (default) + - `kerberos_orlocalpasswd` If password authentication through Kerberos fails, then the password will be validated via any additional local mechanism. Valid values: + - `yes` (default) + - `no` + - `kerberos_ticketcleanup` Destroy the user's ticket cache file on logout? Valid values: + - `yes` (default) + - `no` + - `gssapi_authentication` Authenticate users based on GSSAPI? Valid values: + - `yes` + - `no` (default) + - `gssapi_cleanupcredentials` Destroy user's credential cache on logout? Valid values: + - `yes` (default) + - `no` + - `challenge_response_authentication` If you want to enable ChallengeResponseAuthentication or not When disabled, s/key passwords are disabled. Valid values: + - `yes` + - `no` (default) + - `tcp_forwarding` If you want to enable TcpForwarding. Valid values: + - `yes` + - `no` (default) + - `x11_forwarding` If you want to enable x11 forwarding. Valid values: + - `yes` + - `no` (default) + - `agent_forwarding` If you want to allow ssh-agent forwarding. Valid values: + - `yes` + - `no` (default) + - `pubkey_authentication` If you want to enable public key authentication. Valid values: + - `yes` (default) + - `no` + - `rsa_authentication` If you want to enable RSA Authentication. Valid values: + - `yes` + - `no` (default) + - `rhosts_rsa_authentication` + If you want to enable rhosts RSA Authentication. Valid values: + - `yes` + - `no` (default) + - `hostbased_authentication` If you want to enable `HostbasedAuthentication`. Valid values: + - `yes` + - `no` (default) + - `strict_modes` If you want to set `StrictModes` (check file modes/ownership before accepting login). Valid values: + - `yes` (default) + - `no` + - `permit_empty_passwords` + If you want enable PermitEmptyPasswords to allow empty passwords. Valid + Values: + - `yes` + - `no` (default) + - `ports` If you want to specify a list of ports other than the default `22`; Default: `[22]` + - `authorized_keys_file` + Set this to the location of the AuthorizedKeysFile + (e.g. `/etc/ssh/authorized_keys/%u`). Default: `AuthorizedKeysFile + %h/.ssh/authorized_keys` + - `hardened` + Use only strong ciphers, MAC, KexAlgorithms, etc. + Values: + - `no` (default) + - `yes` + - `print_motd` + Show the Message of the day when a user logs in. + - `sftp_subsystem` + Set a different sftp-subystem than the default one. Might be interesting for + sftponly usage. Default: empty -> no change of the default + - `head_additional_options` + Set this to any additional sshd_options which aren't listed above. Anything + set here will be added to the beginning of the sshd_config file. This option + might be useful to define complicated Match Blocks. This string is going to + be included, like it is defined. So take care! Default: empty -> not added. + - `tail_additional_options` Set this to any additional sshd_options which aren't listed above. Anything set here will be added to the end of the sshd_config file. This option might be useful to define complicated Match Blocks. This string is going to be included, like it is defined. So take care! Default: empty -> not added. + - `shared_ip` Whether the server uses a shared network IP address. If it does, then we don't want it to export an rsa key for its IP address. Values: + - `no` (default) + - `yes` + + +### Defines and functions + +Deploy authorized_keys file with the define `authorized_key`. + +Generate a public/private keypair with the ssh_keygen function. For example, the +following will generate ssh keys and put the different parts of the key into +variables: + +```puppet +$ssh_keys = ssh_keygen("${$ssh_key_basepath}/backup/keys/${::fqdn}/${backup_host}") +$public_key = split($ssh_keys[1],' ') +$sshkey_type => $public_key[0] +$sshkey => $public_key[1] +``` + +## Client + + +On a node where you wish to have the ssh client managed, you can do: + +```puppet +class{'sshd::client': + +} +``` + +in the node definition. This will install the appropriate package. + +## License + + - Copyright 2008-2011, Riseup Labs micah@riseup.net + - Copyright 2008, admin(at)immerda.ch + - Copyright 2008, Puzzle ITC GmbH + - Marcel Härry haerry+puppet(at)puzzle.ch + - Simon Josi josi+puppet(at)puzzle.ch + +This program is free software; you can redistribute +it and/or modify it under the terms of the GNU +General Public License version 3 as published by +the Free Software Foundation. + |