diff options
Diffstat (limited to 'puppet/modules/nagios/README')
| m--------- | puppet/modules/nagios | 0 | ||||
| -rw-r--r-- | puppet/modules/nagios/README | 305 |
2 files changed, 305 insertions, 0 deletions
diff --git a/puppet/modules/nagios b/puppet/modules/nagios deleted file mode 160000 -Subproject 68dab01a85996e14efcccf856b623a2caf25782 diff --git a/puppet/modules/nagios/README b/puppet/modules/nagios/README new file mode 100644 index 00000000..0c42b4a7 --- /dev/null +++ b/puppet/modules/nagios/README @@ -0,0 +1,305 @@ +Introduction/Notes +================== + +This modules was inspired and based on the work of David Schmitt +The immerda project group adapted and improved this module. +Mainly we made it using the new native puppet nagios commands +as well we made it more modular to fit for multidistro usage. + +In it's current form, this module can be used on CentOS and Debian. + + +Overview +======== + +To use the nagios resources in an puppetmaster setup you need to activate +[storeconfigs](https://docs.puppetlabs.com/puppet/latest/reference/configuration.html#storeconfigs) on the puppetmaster. +You can also use this module in a masterless setup, please set the +`storeconfigs` parameter to `false` when declaring the nafios class. + +You need to be running version 0.25 or later of puppet. + + +Monitor +------- + +On one node the "nagios" class has to be included. By default this installs +apache using the "apache" module. To use lighttpd instead, set the "httpd" +parameter to the "nagios" class to "lighttpd", or, if the web server is not to +be managed by puppet, set the "httpd" parameter to "absent". + + +Hosts +----- + +On a node which shall be monitored with nagios, include the "nagios::target". +This just creates a host declaration for this host's "$::ipaddress" fact. If +the $::ipaddress of your target is not the one you wish to modify, you can use +"nagios::target::fqdn" instead, which will use the $::fqdn fact of the host instead. + +Pass the $parents variable to the target class for enabling the reachability +features of nagios. If a node needs more customisation, use the +native "@@nagios_host" type directly (the double-ampersand declares the object +as an exported resource). + +To monitor hosts not managed by puppet, add "nagios_host" objects to the +monitoring node. The required parameters are "alias", "address" and "use". If +you don't specify a proper nagios template with the "use" parameter, some extra +parameters are needed. You may look up the nagios documentation for this. + + +Services +-------- + +Services can be monitored by using the "nagios::service" component. + +The simplest form is: + + nagios::service { 'check_http': + check_command => 'http_port!80', + } + +The intention being obviously to put such declarations into a component defining +a service, thereby being automatically applied together with all instances of +the service. + +Obviously, the check command must either be defined using nagios_command objects +(some are supplied in nagios::defaults::commands) or in the nagios configuration +files directly. + +NRPE client configuration +========================= + +To setup a machine as an NRPE client, the class 'nagios::nrpe' should be used: + + class { 'nagios::nrpe': + allowed_hosts => '10.2.3.4,10.5.6.7', + } + +The class can take the following parameters to change configuration or +configuration directory: + + * $cfg_dir : Defines the path to the NRPE configuration. The default is to use + the path used by packages per your distro. + + * $pid_file : Sets the path of the PID file. The default value is the path + used by init script shipped with your distro's packages. + + * $plugin_dir : Defines the path in which nagios plugins that are to be + executed with NRPE commands are stored. The default value is the path where + your distro's nagios package stores plugins. + + * $server_address : The IP address to which the NRPE client daemon should + bind. The default behaviour is to bind to all IPs. + + * $allowed_hosts : A string containing a comma-separated list of host IPs that + are allowed to request NRPE commands to be run. The default value is to + allow only 127.0.0.1, so you might want to pass in a list of additional host + IPs. + + * $dont_blame : A string that enables ('1') or disables ('0') NRPE command + arguments. Enabling arguments can lead to potentials of shell escapes so it + should be used with caution and only if absolutely needed. This is disabled + by default. + +NRPE Services +------------- + +Some Nagios services need to be checked via NRPE. The following will make the +nagios server define a service that will check the NRPE command 'check_cpu' on +the current node: + + nagios::service { 'CPU Usage': + use_nrpe => true, + check_command => "check_cpu", + nrpe_args => "-t 60" + } + +NRPE Commands +------------- + +To be able to call NRPE commands on a host, one needs to define that command +and what it is going to execute: + + nagios::nrpe::command { 'debsums': + check_command => '/usr/lib/nagios/plugins/check_debsums openssh-server' + } + + +Upgrade Notes +============= + +The nagios::target bits have been reworked, the notable changes that +may affect an upgrade are: + +. previous versions had nagios::target::nat which used the $::fqdn for +the address part of nagios::target, this has been renamed to +nagios::target::fqdn to be more clear. if you were using +nagios::target::nat then you will need to change those references to +::fqdn + +. previous versions of this module used $::fqdn for the nagios::target +address, now it is using $::ipaddress. If you need $::fqdn, use +nagios::target::fqdn instead of nagios::target + +. previous versions of nagios_host used the parameter named 'ip', that +has been changed to 'address' + + +IRC bot +======= + +Notifications can easily be sent to an IRC channel by using a bot. To do so, +simply include 'nagios::irc_bot' on the nagios server and define the right +$nagios_nsa_* variables (see the 'Variables' section below). + +You can then use the notification commands 'notify-by-irc' and +'host-notify-by-irc' with service and host definitions to make them report +state changes over IRC. + +Caveats +======= + + +Consistency/Validation/Verification +----------------------------------- + +After convergance of the configuration, the system is obviously consistent. +That is, all defined services are monitored. The problem is though, that it is +neither automatically valid - it is not guaranteed that all components declare a +nagios::service - and even if the configuration is valid it definitly is +unverified, since that is always a judgment call for an external observer. + + +Removal of nagios objects +------------------------- + +This module does not automatically purge nagios objects such as hosts and +services that become absent from the manifests. One must set ensure => absent +to guarantee the removal of nagios objects from the configuration as desired. + + +Templates not supported using native types +------------------------------------------ + +Templates of hosts and services cannot yet be defined using native types. In +this module, they are provided using a file resource by the class +nagios::defaults::templates + +See : http://projects.reductivelabs.com/issues/1180 + + +Variables +========= + +Options to change the behavior of the nagios class: + +- allow_external_cmd: Set to true, if you'd like to ensure that your http + daemon can write to the external command file. You + may also need to flip "check_external_commands" in + "nagios.cfg" to enable this functionality. + +For the irc_bot class: + +- nsa_socket: This optional variable can be used to specify the path to + the socket file that the IRC daemon should use. + +- nsa_server: When using the IRC bot, this defines the server address of + the IRC network on which the bot will connect. + +- nsa_port: Defines the port number on the IRC server on which the bot + should connect. When this variable is not set, the port used + by default is 6667. + +- nsa_nickname: This is the nickname that the IRC bot will take. + +- nsa_password: Some networks require a password to connect to them. + This defines such a password. + +- nsa_channel: The name of the channel that the IRC bot will join and + will post notifications to. + +- nsa_pidfile: This optional variable can be used to define the path to + the file that will contain the process ID of the IRC bot + daemon. +- nsa_realname: The IRC bot user's real name that will be displayed. By + default, the real name is 'Nagios'. + +- nsa_usenotices: The IRC bot will by default "say" to the channel the + nagios message, but you can switch this variable to + 'notice' if you would prefer them to be sent as IRC + NOTICE messages. + +PNP4Nagios integration +====================== + +For PNP4Nagios integration information, please see README.pnp4nagios + +Examples +======== + +Usage example: + +~~~ +node nagios { + + class { 'nagios': } -> class { 'nagios::defaults': } + + # Declare another nagios command + nagios::command { http_port: + command_line => '/usr/lib/nagios/plugins/check_http -p $ARG1$ -H $HOSTADDRESS$ -I $HOSTADDRESS$' + } + + # Declare unmanaged hosts + nagios_host { + 'router01.mydomain.com': + alias => 'router01', + notes => 'MyDomain Gateway', + address => '10.0.0.1', + use => 'generic-host'; + 'router02.mydomain.com': + alias => 'router02', + address => '192.168.0.1', + parents => 'router01', + use => 'generic-host'; + } + +} + + +node target { + + # Monitor this host + class{'nagios::target': + parents = 'router01' + } + + # monitor a service + $apache2_port = 8080 + include apache2 + + # This actually does this somewhere: + #nagios::service { "http_${apache2_port}": + # check_command => "http_port!${apache2_port}" + #} + +} +~~~ + +TODO +==== + +- Provide a default http vhost +- Add facility to deploy nagios plugins +- Add more useful commands and services +- When Puppet will support them, supply nagios templates using native types + + +License +======= + +Copyright (C) 2007 David Schmitt <david@schmitt.edv-bus.at> +See the file LICENSE in the top directory for the full license. + +Copyright (C) 2010 Riseup Networks <micah@riseup.net> + |