summaryrefslogtreecommitdiff
path: root/puppet/modules/nagios/files/configs/CentOS
diff options
context:
space:
mode:
authorMicah <micah@leap.se>2016-07-12 16:46:11 -0400
committerMicah <micah@leap.se>2016-07-12 16:46:11 -0400
commit26aac7ccf240b06d65616bdd00ae472d980aaea9 (patch)
treefc9b582d71c32a470bc677d80c2d6c9abe6970d3 /puppet/modules/nagios/files/configs/CentOS
parentf5775156d8d8800247b8917ab6212c7eed16a124 (diff)
git subrepo clone https://leap.se/git/puppet_nagios puppet/modules/nagios
subrepo: subdir: "puppet/modules/nagios" merged: "e6fee3c" upstream: origin: "https://leap.se/git/puppet_nagios" branch: "master" commit: "e6fee3c" git-subrepo: version: "0.3.0" origin: "https://github.com/ingydotnet/git-subrepo" commit: "1e79595" Change-Id: Ib7105f359ea2c3ae6490bff4fcecbede2511eaf0
Diffstat (limited to 'puppet/modules/nagios/files/configs/CentOS')
-rw-r--r--puppet/modules/nagios/files/configs/CentOS/cgi.cfg280
-rw-r--r--puppet/modules/nagios/files/configs/CentOS/nagios.cfg949
-rw-r--r--puppet/modules/nagios/files/configs/CentOS/private/resource.cfg.i38634
-rw-r--r--puppet/modules/nagios/files/configs/CentOS/private/resource.cfg.x86_6434
4 files changed, 1297 insertions, 0 deletions
diff --git a/puppet/modules/nagios/files/configs/CentOS/cgi.cfg b/puppet/modules/nagios/files/configs/CentOS/cgi.cfg
new file mode 100644
index 00000000..cd625d4c
--- /dev/null
+++ b/puppet/modules/nagios/files/configs/CentOS/cgi.cfg
@@ -0,0 +1,280 @@
+#################################################################
+#
+# CGI.CFG - Sample CGI Configuration File for Nagios 2.9
+#
+# Last Modified: 11-21-2006
+#
+#################################################################
+
+
+# MAIN CONFIGURATION FILE
+# This tells the CGIs where to find your main configuration file.
+# The CGIs will read the main and host config files for any other
+# data they might need.
+
+main_config_file=/etc/nagios/nagios.cfg
+
+
+
+# PHYSICAL HTML PATH
+# This is the path where the HTML files for Nagios reside. This
+# value is used to locate the logo images needed by the statusmap
+# and statuswrl CGIs.
+
+physical_html_path=/usr/share/nagios/share
+
+
+
+# URL HTML PATH
+# This is the path portion of the URL that corresponds to the
+# physical location of the Nagios HTML files (as defined above).
+# This value is used by the CGIs to locate the online documentation
+# and graphics. If you access the Nagios pages with an URL like
+# http://www.myhost.com/nagios, this value should be '/nagios'
+# (without the quotes).
+
+url_html_path=/nagios
+
+
+
+# CONTEXT-SENSITIVE HELP
+# This option determines whether or not a context-sensitive
+# help icon will be displayed for most of the CGIs.
+# Values: 0 = disables context-sensitive help
+# 1 = enables context-sensitive help
+
+show_context_help=0
+
+
+
+# NAGIOS PROCESS CHECK COMMAND
+# This is the full path and filename of the program used to check
+# the status of the Nagios process. It is used only by the CGIs
+# and is completely optional. However, if you don't use it, you'll
+# see warning messages in the CGIs about the Nagios process
+# not running and you won't be able to execute any commands from
+# the web interface. The program should follow the same rules
+# as plugins; the return codes are the same as for the plugins,
+# it should have timeout protection, it should output something
+# to STDIO, etc.
+#
+# Note: The command line for the check_nagios plugin below may
+# have to be tweaked a bit, as different versions of the plugin
+# use different command line arguments/syntaxes.
+
+#nagios_check_command=/usr/lib64/nagios/plugins/check_nagios /var/log/nagios/status.dat 5 '/usr/sbin/nagios'
+
+
+
+# AUTHENTICATION USAGE
+# This option controls whether or not the CGIs will use any
+# authentication when displaying host and service information, as
+# well as committing commands to Nagios for processing.
+#
+# Read the HTML documentation to learn how the authorization works!
+#
+# NOTE: It is a really *bad* idea to disable authorization, unless
+# you plan on removing the command CGI (cmd.cgi)! Failure to do
+# so will leave you wide open to kiddies messing with Nagios and
+# possibly hitting you with a denial of service attack by filling up
+# your drive by continuously writing to your command file!
+#
+# Setting this value to 0 will cause the CGIs to *not* use
+# authentication (bad idea), while any other value will make them
+# use the authentication functions (the default).
+
+use_authentication=1
+
+
+
+# DEFAULT USER
+# Setting this variable will define a default user name that can
+# access pages without authentication. This allows people within a
+# secure domain (i.e., behind a firewall) to see the current status
+# without authenticating. You may want to use this to avoid basic
+# authentication if you are not using a secure server since basic
+# authentication transmits passwords in the clear.
+#
+# Important: Do not define a default username unless you are
+# running a secure web server and are sure that everyone who has
+# access to the CGIs has been authenticated in some manner! If you
+# define this variable, anyone who has not authenticated to the web
+# server will inherit all rights you assign to this user!
+
+#default_user_name=guest
+
+
+
+# SYSTEM/PROCESS INFORMATION ACCESS
+# This option is a comma-delimited list of all usernames that
+# have access to viewing the Nagios process information as
+# provided by the Extended Information CGI (extinfo.cgi). By
+# default, *no one* has access to this unless you choose to
+# not use authorization. You may use an asterisk (*) to
+# authorize any user who has authenticated to the web server.
+
+#authorized_for_system_information=nagiosadmin,theboss,jdoe
+authorized_for_system_information=admin
+
+# CONFIGURATION INFORMATION ACCESS
+# This option is a comma-delimited list of all usernames that
+# can view ALL configuration information (hosts, commands, etc).
+# By default, users can only view configuration information
+# for the hosts and services they are contacts for. You may use
+# an asterisk (*) to authorize any user who has authenticated
+# to the web server.
+
+#authorized_for_configuration_information=nagiosadmin,jdoe
+authorized_for_configuration_information=admin
+
+
+
+# SYSTEM/PROCESS COMMAND ACCESS
+# This option is a comma-delimited list of all usernames that
+# can issue shutdown and restart commands to Nagios via the
+# command CGI (cmd.cgi). Users in this list can also change
+# the program mode to active or standby. By default, *no one*
+# has access to this unless you choose to not use authorization.
+# You may use an asterisk (*) to authorize any user who has
+# authenticated to the web server.
+
+#authorized_for_system_commands=nagiosadmin
+authorized_for_system_commands=admin
+
+
+
+# GLOBAL HOST/SERVICE VIEW ACCESS
+# These two options are comma-delimited lists of all usernames that
+# can view information for all hosts and services that are being
+# monitored. By default, users can only view information
+# for hosts or services that they are contacts for (unless you
+# you choose to not use authorization). You may use an asterisk (*)
+# to authorize any user who has authenticated to the web server.
+
+
+#authorized_for_all_services=nagiosadmin,guest
+authorized_for_all_services=admin
+#authorized_for_all_hosts=nagiosadmin,guest
+authorized_for_all_hosts=admin
+
+
+
+# GLOBAL HOST/SERVICE COMMAND ACCESS
+# These two options are comma-delimited lists of all usernames that
+# can issue host or service related commands via the command
+# CGI (cmd.cgi) for all hosts and services that are being monitored.
+# By default, users can only issue commands for hosts or services
+# that they are contacts for (unless you you choose to not use
+# authorization). You may use an asterisk (*) to authorize any
+# user who has authenticated to the web server.
+
+#authorized_for_all_service_commands=nagiosadmin
+authorized_for_all_service_commands=admin
+#authorized_for_all_host_commands=nagiosadmin
+authorized_for_all_host_commands=admin
+
+
+
+
+# STATUSMAP BACKGROUND IMAGE
+# This option allows you to specify an image to be used as a
+# background in the statusmap CGI. It is assumed that the image
+# resides in the HTML images path (i.e. /usr/local/nagios/share/images).
+# This path is automatically determined by appending "/images"
+# to the path specified by the 'physical_html_path' directive.
+# Note: The image file may be in GIF, PNG, JPEG, or GD2 format.
+# However, I recommend that you convert your image to GD2 format
+# (uncompressed), as this will cause less CPU load when the CGI
+# generates the image.
+
+#statusmap_background_image=smbackground.gd2
+
+
+
+# DEFAULT STATUSMAP LAYOUT METHOD
+# This option allows you to specify the default layout method
+# the statusmap CGI should use for drawing hosts. If you do
+# not use this option, the default is to use user-defined
+# coordinates. Valid options are as follows:
+# 0 = User-defined coordinates
+# 1 = Depth layers
+# 2 = Collapsed tree
+# 3 = Balanced tree
+# 4 = Circular
+# 5 = Circular (Marked Up)
+
+default_statusmap_layout=5
+
+
+
+# DEFAULT STATUSWRL LAYOUT METHOD
+# This option allows you to specify the default layout method
+# the statuswrl (VRML) CGI should use for drawing hosts. If you
+# do not use this option, the default is to use user-defined
+# coordinates. Valid options are as follows:
+# 0 = User-defined coordinates
+# 2 = Collapsed tree
+# 3 = Balanced tree
+# 4 = Circular
+
+default_statuswrl_layout=4
+
+
+
+# STATUSWRL INCLUDE
+# This option allows you to include your own objects in the
+# generated VRML world. It is assumed that the file
+# resides in the HTML path (i.e. /usr/local/nagios/share).
+
+#statuswrl_include=myworld.wrl
+
+
+
+# PING SYNTAX
+# This option determines what syntax should be used when
+# attempting to ping a host from the WAP interface (using
+# the statuswml CGI. You must include the full path to
+# the ping binary, along with all required options. The
+# $HOSTADDRESS$ macro is substituted with the address of
+# the host before the command is executed.
+# Please note that the syntax for the ping binary is
+# notorious for being different on virtually ever *NIX
+# OS and distribution, so you may have to tweak this to
+# work on your system.
+
+ping_syntax=/bin/ping -n -U -c 5 $HOSTADDRESS$
+
+
+
+# REFRESH RATE
+# This option allows you to specify the refresh rate in seconds
+# of various CGIs (status, statusmap, extinfo, and outages).
+
+refresh_rate=90
+
+
+
+# SOUND OPTIONS
+# These options allow you to specify an optional audio file
+# that should be played in your browser window when there are
+# problems on the network. The audio files are used only in
+# the status CGI. Only the sound for the most critical problem
+# will be played. Order of importance (higher to lower) is as
+# follows: unreachable hosts, down hosts, critical services,
+# warning services, and unknown services. If there are no
+# visible problems, the sound file optionally specified by
+# 'normal_sound' variable will be played.
+#
+#
+# <varname>=<sound_file>
+#
+# Note: All audio files must be placed in the /media subdirectory
+# under the HTML path (i.e. /usr/local/nagios/share/media/).
+
+#host_unreachable_sound=hostdown.wav
+#host_down_sound=hostdown.wav
+#service_critical_sound=critical.wav
+#service_warning_sound=warning.wav
+#service_unknown_sound=warning.wav
+#normal_sound=noproblem.wav
+
diff --git a/puppet/modules/nagios/files/configs/CentOS/nagios.cfg b/puppet/modules/nagios/files/configs/CentOS/nagios.cfg
new file mode 100644
index 00000000..b88e3db7
--- /dev/null
+++ b/puppet/modules/nagios/files/configs/CentOS/nagios.cfg
@@ -0,0 +1,949 @@
+##############################################################################
+#
+# NAGIOS.CFG - Sample Main Config File for Nagios 2.10
+#
+# Read the documentation for more information on this configuration
+# file. I've provided some comments here, but things may not be so
+# clear without further explanation.
+#
+# Last Modified: 12-21-2006
+#
+##############################################################################
+
+
+# LOG FILE
+# This is the main log file where service and host events are logged
+# for historical purposes. This should be the first option specified
+# in the config file!!!
+
+log_file=/var/log/nagios/nagios.log
+
+
+
+# OBJECT CONFIGURATION FILE(S)
+# This is the configuration file in which you define hosts, host
+# groups, contacts, contact groups, services, etc. I guess it would
+# be better called an object definition file, but for historical
+# reasons it isn't. You can split object definitions into several
+# different config files by using multiple cfg_file statements here.
+# Nagios will read and process all the config files you define.
+# This can be very useful if you want to keep command definitions
+# separate from host and contact definitions...
+
+# Puppet-managed configuration files
+cfg_file=/etc/nagios/nagios_templates.cfg
+cfg_file=/etc/nagios/nagios_command.cfg
+cfg_file=/etc/nagios/nagios_contact.cfg
+cfg_file=/etc/nagios/nagios_contactgroup.cfg
+cfg_file=/etc/nagios/nagios_host.cfg
+cfg_file=/etc/nagios/nagios_hostdependency.cfg
+cfg_file=/etc/nagios/nagios_hostescalation.cfg
+cfg_file=/etc/nagios/nagios_hostextinfo.cfg
+cfg_file=/etc/nagios/nagios_hostgroup.cfg
+cfg_file=/etc/nagios/nagios_hostgroupescalation.cfg
+cfg_file=/etc/nagios/nagios_service.cfg
+cfg_file=/etc/nagios/nagios_servicedependency.cfg
+cfg_file=/etc/nagios/nagios_serviceescalation.cfg
+cfg_file=/etc/nagios/nagios_serviceextinfo.cfg
+cfg_file=/etc/nagios/nagios_servicegroup.cfg
+cfg_file=/etc/nagios/nagios_timeperiod.cfg
+
+# OBJECT CACHE FILE
+# This option determines where object definitions are cached when
+# Nagios starts/restarts. The CGIs read object definitions from
+# this cache file (rather than looking at the object config files
+# directly) in order to prevent inconsistencies that can occur
+# when the config files are modified after Nagios starts.
+
+object_cache_file=/var/log/nagios/objects.cache
+
+
+
+# RESOURCE FILE
+# This is an optional resource file that contains $USERx$ macro
+# definitions. Multiple resource files can be specified by using
+# multiple resource_file definitions. The CGIs will not attempt to
+# read the contents of resource files, so information that is
+# considered to be sensitive (usernames, passwords, etc) can be
+# defined as macros in this file and restrictive permissions (600)
+# can be placed on this file.
+
+resource_file=/etc/nagios/private/resource.cfg
+
+
+
+# STATUS FILE
+# This is where the current status of all monitored services and
+# hosts is stored. Its contents are read and processed by the CGIs.
+# The contents of the status file are deleted every time Nagios
+# restarts.
+
+status_file=/var/log/nagios/status.dat
+
+
+
+# NAGIOS USER
+# This determines the effective user that Nagios should run as.
+# You can either supply a username or a UID.
+
+nagios_user=nagios
+
+
+
+# NAGIOS GROUP
+# This determines the effective group that Nagios should run as.
+# You can either supply a group name or a GID.
+
+nagios_group=nagios
+
+
+
+# EXTERNAL COMMAND OPTION
+# This option allows you to specify whether or not Nagios should check
+# for external commands (in the command file defined below). By default
+# Nagios will *not* check for external commands, just to be on the
+# cautious side. If you want to be able to use the CGI command interface
+# you will have to enable this. Setting this value to 0 disables command
+# checking (the default), other values enable it.
+
+check_external_commands=0
+
+
+
+# EXTERNAL COMMAND CHECK INTERVAL
+# This is the interval at which Nagios should check for external commands.
+# This value works of the interval_length you specify later. If you leave
+# that at its default value of 60 (seconds), a value of 1 here will cause
+# Nagios to check for external commands every minute. If you specify a
+# number followed by an "s" (i.e. 15s), this will be interpreted to mean
+# actual seconds rather than a multiple of the interval_length variable.
+# Note: In addition to reading the external command file at regularly
+# scheduled intervals, Nagios will also check for external commands after
+# event handlers are executed.
+# NOTE: Setting this value to -1 causes Nagios to check the external
+# command file as often as possible.
+
+#command_check_interval=15s
+command_check_interval=-1
+
+
+
+# EXTERNAL COMMAND FILE
+# This is the file that Nagios checks for external command requests.
+# It is also where the command CGI will write commands that are submitted
+# by users, so it must be writeable by the user that the web server
+# is running as (usually 'nobody'). Permissions should be set at the
+# directory level instead of on the file, as the file is deleted every
+# time its contents are processed.
+
+command_file=/var/spool/nagios/cmd/nagios.cmd
+
+
+
+# EXTERNAL COMMAND BUFFER SLOTS
+# This settings is used to tweak the number of items or "slots" that
+# the Nagios daemon should allocate to the buffer that holds incoming
+# external commands before they are processed. As external commands
+# are processed by the daemon, they are removed from the buffer.
+
+external_command_buffer_slots=4096
+
+
+
+# COMMENT FILE
+# This is the file that Nagios will use for storing host and service
+# comments.
+
+comment_file=/var/log/nagios/comments.dat
+
+
+
+# DOWNTIME FILE
+# This is the file that Nagios will use for storing host and service
+# downtime data.
+
+downtime_file=/var/log/nagios/downtime.dat
+
+
+
+# LOCK FILE
+# This is the lockfile that Nagios will use to store its PID number
+# in when it is running in daemon mode.
+
+lock_file=/var/run/nagios.pid
+
+
+
+# TEMP FILE
+# This is a temporary file that is used as scratch space when Nagios
+# updates the status log, cleans the comment file, etc. This file
+# is created, used, and deleted throughout the time that Nagios is
+# running.
+
+temp_file=/var/log/nagios/nagios.tmp
+
+
+
+# EVENT BROKER OPTIONS
+# Controls what (if any) data gets sent to the event broker.
+# Values: 0 = Broker nothing
+# -1 = Broker everything
+# <other> = See documentation
+
+event_broker_options=-1
+
+
+
+# EVENT BROKER MODULE(S)
+# This directive is used to specify an event broker module that should
+# by loaded by Nagios at startup. Use multiple directives if you want
+# to load more than one module. Arguments that should be passed to
+# the module at startup are seperated from the module path by a space.
+#
+# Example:
+#
+# broker_module=<modulepath> [moduleargs]
+
+#broker_module=/somewhere/module1.o
+#broker_module=/somewhere/module2.o arg1 arg2=3 debug=0
+
+
+
+
+# LOG ROTATION METHOD
+# This is the log rotation method that Nagios should use to rotate
+# the main log file. Values are as follows..
+# n = None - don't rotate the log
+# h = Hourly rotation (top of the hour)
+# d = Daily rotation (midnight every day)
+# w = Weekly rotation (midnight on Saturday evening)
+# m = Monthly rotation (midnight last day of month)
+
+log_rotation_method=d
+
+
+
+# LOG ARCHIVE PATH
+# This is the directory where archived (rotated) log files should be
+# placed (assuming you've chosen to do log rotation).
+
+log_archive_path=/var/log/nagios/archives
+
+
+
+# LOGGING OPTIONS
+# If you want messages logged to the syslog facility, as well as the
+# NetAlarm log file set this option to 1. If not, set it to 0.
+
+use_syslog=1
+
+
+
+# NOTIFICATION LOGGING OPTION
+# If you don't want notifications to be logged, set this value to 0.
+# If notifications should be logged, set the value to 1.
+
+log_notifications=1
+
+
+
+# SERVICE RETRY LOGGING OPTION
+# If you don't want service check retries to be logged, set this value
+# to 0. If retries should be logged, set the value to 1.
+
+log_service_retries=1
+
+
+
+# HOST RETRY LOGGING OPTION
+# If you don't want host check retries to be logged, set this value to
+# 0. If retries should be logged, set the value to 1.
+
+log_host_retries=1
+
+
+
+# EVENT HANDLER LOGGING OPTION
+# If you don't want host and service event handlers to be logged, set
+# this value to 0. If event handlers should be logged, set the value
+# to 1.
+
+log_event_handlers=1
+
+
+
+# INITIAL STATES LOGGING OPTION
+# If you want Nagios to log all initial host and service states to
+# the main log file (the first time the service or host is checked)
+# you can enable this option by setting this value to 1. If you
+# are not using an external application that does long term state
+# statistics reporting, you do not need to enable this option. In
+# this case, set the value to 0.
+
+log_initial_states=0
+
+
+
+# EXTERNAL COMMANDS LOGGING OPTION
+# If you don't want Nagios to log external commands, set this value
+# to 0. If external commands should be logged, set this value to 1.
+# Note: This option does not include logging of passive service
+# checks - see the option below for controlling whether or not
+# passive checks are logged.
+
+log_external_commands=1
+
+
+
+# PASSIVE CHECKS LOGGING OPTION
+# If you don't want Nagios to log passive host and service checks, set
+# this value to 0. If passive checks should be logged, set
+# this value to 1.
+
+log_passive_checks=1
+
+
+
+# GLOBAL HOST AND SERVICE EVENT HANDLERS
+# These options allow you to specify a host and service event handler
+# command that is to be run for every host or service state change.
+# The global event handler is executed immediately prior to the event
+# handler that you have optionally specified in each host or
+# service definition. The command argument is the short name of a
+# command definition that you define in your host configuration file.
+# Read the HTML docs for more information.
+
+#global_host_event_handler=somecommand
+#global_service_event_handler=somecommand
+
+
+
+# SERVICE INTER-CHECK DELAY METHOD
+# This is the method that Nagios should use when initially
+# "spreading out" service checks when it starts monitoring. The
+# default is to use smart delay calculation, which will try to
+# space all service checks out evenly to minimize CPU load.
+# Using the dumb setting will cause all checks to be scheduled
+# at the same time (with no delay between them)! This is not a
+# good thing for production, but is useful when testing the
+# parallelization functionality.
+# n = None - don't use any delay between checks
+# d = Use a "dumb" delay of 1 second between checks
+# s = Use "smart" inter-check delay calculation
+# x.xx = Use an inter-check delay of x.xx seconds
+
+service_inter_check_delay_method=s
+
+
+
+# MAXIMUM SERVICE CHECK SPREAD
+# This variable determines the timeframe (in minutes) from the
+# program start time that an initial check of all services should
+# be completed. Default is 30 minutes.
+
+max_service_check_spread=30
+
+
+
+# SERVICE CHECK INTERLEAVE FACTOR
+# This variable determines how service checks are interleaved.
+# Interleaving the service checks allows for a more even
+# distribution of service checks and reduced load on remote
+# hosts. Setting this value to 1 is equivalent to how versions
+# of Nagios previous to 0.0.5 did service checks. Set this
+# value to s (smart) for automatic calculation of the interleave
+# factor unless you have a specific reason to change it.
+# s = Use "smart" interleave factor calculation
+# x = Use an interleave factor of x, where x is a
+# number greater than or equal to 1.
+
+service_interleave_factor=s
+
+
+
+# HOST INTER-CHECK DELAY METHOD
+# This is the method that Nagios should use when initially
+# "spreading out" host checks when it starts monitoring. The
+# default is to use smart delay calculation, which will try to
+# space all host checks out evenly to minimize CPU load.
+# Using the dumb setting will cause all checks to be scheduled
+# at the same time (with no delay between them)!
+# n = None - don't use any delay between checks
+# d = Use a "dumb" delay of 1 second between checks
+# s = Use "smart" inter-check delay calculation
+# x.xx = Use an inter-check delay of x.xx seconds
+
+host_inter_check_delay_method=s
+
+
+
+# MAXIMUM HOST CHECK SPREAD
+# This variable determines the timeframe (in minutes) from the
+# program start time that an initial check of all hosts should
+# be completed. Default is 30 minutes.
+
+max_host_check_spread=30
+
+
+
+# MAXIMUM CONCURRENT SERVICE CHECKS
+# This option allows you to specify the maximum number of
+# service checks that can be run in parallel at any given time.
+# Specifying a value of 1 for this variable essentially prevents
+# any service checks from being parallelized. A value of 0
+# will not restrict the number of concurrent checks that are
+# being executed.
+
+max_concurrent_checks=0
+
+
+
+# SERVICE CHECK REAPER FREQUENCY
+# This is the frequency (in seconds!) that Nagios will process
+# the results of services that have been checked.
+
+service_reaper_frequency=10
+
+
+
+# CHECK RESULT BUFFER SLOTS
+# This settings is used to tweak the number of items or "slots" that
+# the Nagios daemon should allocate to the buffer that holds
+# service check results before they are processed. As check results
+# are processed by the daemon, they are removed from the buffer.
+
+check_result_buffer_slots=4096
+
+
+
+# AUTO-RESCHEDULING OPTION
+# This option determines whether or not Nagios will attempt to
+# automatically reschedule active host and service checks to
+# "smooth" them out over time. This can help balance the load on
+# the monitoring server.
+# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
+# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
+
+auto_reschedule_checks=0
+
+
+
+# AUTO-RESCHEDULING INTERVAL
+# This option determines how often (in seconds) Nagios will
+# attempt to automatically reschedule checks. This option only
+# has an effect if the auto_reschedule_checks option is enabled.
+# Default is 30 seconds.
+# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
+# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
+
+auto_rescheduling_interval=30
+
+
+
+
+# AUTO-RESCHEDULING WINDOW
+# This option determines the "window" of time (in seconds) that
+# Nagios will look at when automatically rescheduling checks.
+# Only host and service checks that occur in the next X seconds
+# (determined by this variable) will be rescheduled. This option
+# only has an effect if the auto_reschedule_checks option is
+# enabled. Default is 180 seconds (3 minutes).
+# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
+# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
+
+auto_rescheduling_window=180
+
+
+
+# SLEEP TIME
+# This is the number of seconds to sleep between checking for system
+# events and service checks that need to be run.
+
+sleep_time=0.25
+
+
+
+# TIMEOUT VALUES
+# These options control how much time Nagios will allow various
+# types of commands to execute before killing them off. Options
+# are available for controlling maximum time allotted for
+# service checks, host checks, event handlers, notifications, the
+# ocsp command, and performance data commands. All values are in
+# seconds.
+
+service_check_timeout=60
+host_check_timeout=30
+event_handler_timeout=30
+notification_timeout=30
+ocsp_timeout=5
+perfdata_timeout=5
+
+
+
+# RETAIN STATE INFORMATION
+# This setting determines whether or not Nagios will save state
+# information for services and hosts before it shuts down. Upon
+# startup Nagios will reload all saved service and host state
+# information before starting to monitor. This is useful for
+# maintaining long-term data on state statistics, etc, but will
+# slow Nagios down a bit when it (re)starts. Since its only
+# a one-time penalty, I think its well worth the additional
+# startup delay.
+
+retain_state_information=1
+
+
+
+# STATE RETENTION FILE
+# This is the file that Nagios should use to store host and
+# service state information before it shuts down. The state
+# information in this file is also read immediately prior to
+# starting to monitor the network when Nagios is restarted.
+# This file is used only if the preserve_state_information
+# variable is set to 1.
+
+state_retention_file=/var/log/nagios/retention.dat
+
+
+
+# RETENTION DATA UPDATE INTERVAL
+# This setting determines how often (in minutes) that Nagios
+# will automatically save retention data during normal operation.
+# If you set this value to 0, Nagios will not save retention
+# data at regular interval, but it will still save retention
+# data before shutting down or restarting. If you have disabled
+# state retention, this option has no effect.
+
+retention_update_interval=60
+
+
+
+# USE RETAINED PROGRAM STATE
+# This setting determines whether or not Nagios will set
+# program status variables based on the values saved in the
+# retention file. If you want to use retained program status
+# information, set this value to 1. If not, set this value
+# to 0.
+
+use_retained_program_state=1
+
+
+
+# USE RETAINED SCHEDULING INFO
+# This setting determines whether or not Nagios will retain
+# the scheduling info (next check time) for hosts and services
+# based on the values saved in the retention file. If you
+# If you want to use retained scheduling info, set this
+# value to 1. If not, set this value to 0.
+
+use_retained_scheduling_info=0
+
+
+
+# INTERVAL LENGTH
+# This is the seconds per unit interval as used in the
+# host/contact/service configuration files. Setting this to 60 means
+# that each interval is one minute long (60 seconds). Other settings
+# have not been tested much, so your mileage is likely to vary...
+
+interval_length=60
+
+
+
+# AGGRESSIVE HOST CHECKING OPTION
+# If you don't want to turn on aggressive host checking features, set
+# this value to 0 (the default). Otherwise set this value to 1 to
+# enable the aggressive check option. Read the docs for more info
+# on what aggressive host check is or check out the source code in
+# base/checks.c
+
+use_aggressive_host_checking=0
+
+
+
+# SERVICE CHECK EXECUTION OPTION
+# This determines whether or not Nagios will actively execute
+# service checks when it initially starts. If this option is
+# disabled, checks are not actively made, but Nagios can still
+# receive and process passive check results that come in. Unless
+# you're implementing redundant hosts or have a special need for
+# disabling the execution of service checks, leave this enabled!
+# Values: 1 = enable checks, 0 = disable checks
+
+execute_service_checks=1
+
+
+
+# PASSIVE SERVICE CHECK ACCEPTANCE OPTION
+# This determines whether or not Nagios will accept passive
+# service checks results when it initially (re)starts.
+# Values: 1 = accept passive checks, 0 = reject passive checks
+
+accept_passive_service_checks=1
+
+
+
+# HOST CHECK EXECUTION OPTION
+# This determines whether or not Nagios will actively execute
+# host checks when it initially starts. If this option is
+# disabled, checks are not actively made, but Nagios can still
+# receive and process passive check results that come in. Unless
+# you're implementing redundant hosts or have a special need for
+# disabling the execution of host checks, leave this enabled!
+# Values: 1 = enable checks, 0 = disable checks
+
+execute_host_checks=1
+
+
+
+# PASSIVE HOST CHECK ACCEPTANCE OPTION
+# This determines whether or not Nagios will accept passive
+# host checks results when it initially (re)starts.
+# Values: 1 = accept passive checks, 0 = reject passive checks
+
+accept_passive_host_checks=1
+
+
+
+# NOTIFICATIONS OPTION
+# This determines whether or not Nagios will sent out any host or
+# service notifications when it is initially (re)started.
+# Values: 1 = enable notifications, 0 = disable notifications
+
+enable_notifications=1
+
+
+
+# EVENT HANDLER USE OPTION
+# This determines whether or not Nagios will run any host or
+# service event handlers when it is initially (re)started. Unless
+# you're implementing redundant hosts, leave this option enabled.
+# Values: 1 = enable event handlers, 0 = disable event handlers
+
+enable_event_handlers=1
+
+
+
+# PROCESS PERFORMANCE DATA OPTION
+# This determines whether or not Nagios will process performance
+# data returned from service and host checks. If this option is
+# enabled, host performance data will be processed using the
+# host_perfdata_command (defined below) and service performance
+# data will be processed using the service_perfdata_command (also
+# defined below). Read the HTML docs for more information on
+# performance data.
+# Values: 1 = process performance data, 0 = do not process performance data
+
+process_performance_data=0
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS
+# These commands are run after every host and service check is
+# performed. These commands are executed only if the
+# enable_performance_data option (above) is set to 1. The command
+# argument is the short name of a command definition that you
+# define in your host configuration file. Read the HTML docs for
+# more information on performance data.
+
+#host_perfdata_command=process-host-perfdata
+#service_perfdata_command=process-service-perfdata
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILES
+# These files are used to store host and service performance data.
+# Performance data is only written to these files if the
+# enable_performance_data option (above) is set to 1.
+
+#host_perfdata_file=/tmp/host-perfdata
+#service_perfdata_file=/tmp/service-perfdata
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES
+# These options determine what data is written (and how) to the
+# performance data files. The templates may contain macros, special
+# characters (\t for tab, \r for carriage return, \n for newline)
+# and plain text. A newline is automatically added after each write
+# to the performance data file. Some examples of what you can do are
+# shown below.
+
+#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$
+#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$
+
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILE MODES
+# This option determines whether or not the host and service
+# performance data files are opened in write ("w") or append ("a")
+# mode. Unless you are the files are named pipes, you will probably
+# want to use the default mode of append ("a").
+
+#host_perfdata_file_mode=a
+#service_perfdata_file_mode=a
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL
+# These options determine how often (in seconds) the host and service
+# performance data files are processed using the commands defined
+# below. A value of 0 indicates the files should not be periodically
+# processed.
+
+#host_perfdata_file_processing_interval=0
+#service_perfdata_file_processing_interval=0
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS
+# These commands are used to periodically process the host and
+# service performance data files. The interval at which the
+# processing occurs is determined by the options above.
+
+#host_perfdata_file_processing_command=process-host-perfdata-file
+#service_perfdata_file_processing_command=process-service-perfdata-file
+
+
+
+# OBSESS OVER SERVICE CHECKS OPTION
+# This determines whether or not Nagios will obsess over service
+# checks and run the ocsp_command defined below. Unless you're
+# planning on implementing distributed monitoring, do not enable
+# this option. Read the HTML docs for more information on
+# implementing distributed monitoring.
+# Values: 1 = obsess over services, 0 = do not obsess (default)
+
+obsess_over_services=0
+
+
+
+# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND
+# This is the command that is run for every service check that is
+# processed by Nagios. This command is executed only if the
+# obsess_over_service option (above) is set to 1. The command
+# argument is the short name of a command definition that you
+# define in your host configuration file. Read the HTML docs for
+# more information on implementing distributed monitoring.
+
+#ocsp_command=somecommand
+
+
+
+# ORPHANED SERVICE CHECK OPTION
+# This determines whether or not Nagios will periodically
+# check for orphaned services. Since service checks are not
+# rescheduled until the results of their previous execution
+# instance are processed, there exists a possibility that some
+# checks may never get rescheduled. This seems to be a rare
+# problem and should not happen under normal circumstances.
+# If you have problems with service checks never getting
+# rescheduled, you might want to try enabling this option.
+# Values: 1 = enable checks, 0 = disable checks
+
+check_for_orphaned_services=1
+
+
+
+# SERVICE FRESHNESS CHECK OPTION
+# This option determines whether or not Nagios will periodically
+# check the "freshness" of service results. Enabling this option
+# is useful for ensuring passive checks are received in a timely
+# manner.
+# Values: 1 = enabled freshness checking, 0 = disable freshness checking
+
+check_service_freshness=1
+
+
+
+# SERVICE FRESHNESS CHECK INTERVAL
+# This setting determines how often (in seconds) Nagios will
+# check the "freshness" of service check results. If you have
+# disabled service freshness checking, this option has no effect.
+
+service_freshness_check_interval=60
+
+
+
+# HOST FRESHNESS CHECK OPTION
+# This option determines whether or not Nagios will periodically
+# check the "freshness" of host results. Enabling this option
+# is useful for ensuring passive checks are received in a timely
+# manner.
+# Values: 1 = enabled freshness checking, 0 = disable freshness checking
+
+check_host_freshness=0
+
+
+
+# HOST FRESHNESS CHECK INTERVAL
+# This setting determines how often (in seconds) Nagios will
+# check the "freshness" of host check results. If you have
+# disabled host freshness checking, this option has no effect.
+
+host_freshness_check_interval=60
+
+
+
+# AGGREGATED STATUS UPDATES
+# This option determines whether or not Nagios will
+# aggregate updates of host, service, and program status
+# data. Normally, status data is updated immediately when
+# a change occurs. This can result in high CPU loads if
+# you are monitoring a lot of services. If you want Nagios
+# to only refresh status data every few seconds, disable
+# this option.
+# Values: 1 = enable aggregate updates, 0 = disable aggregate updates
+
+aggregate_status_updates=1
+
+
+
+# AGGREGATED STATUS UPDATE INTERVAL
+# Combined with the aggregate_status_updates option,
+# this option determines the frequency (in seconds!) that
+# Nagios will periodically dump program, host, and
+# service status data. If you are not using aggregated
+# status data updates, this option has no effect.
+
+status_update_interval=15
+
+
+
+# FLAP DETECTION OPTION
+# This option determines whether or not Nagios will try
+# and detect hosts and services that are "flapping".
+# Flapping occurs when a host or service changes between
+# states too frequently. When Nagios detects that a
+# host or service is flapping, it will temporarily suppress
+# notifications for that host/service until it stops
+# flapping. Flap detection is very experimental, so read
+# the HTML documentation before enabling this feature!
+# Values: 1 = enable flap detection
+# 0 = disable flap detection (default)
+
+enable_flap_detection=0
+
+
+
+# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES
+# Read the HTML documentation on flap detection for
+# an explanation of what this option does. This option
+# has no effect if flap detection is disabled.
+
+low_service_flap_threshold=5.0
+high_service_flap_threshold=20.0
+low_host_flap_threshold=5.0
+high_host_flap_threshold=20.0
+
+
+
+# DATE FORMAT OPTION
+# This option determines how short dates are displayed. Valid options
+# include:
+# us (MM-DD-YYYY HH:MM:SS)
+# euro (DD-MM-YYYY HH:MM:SS)
+# iso8601 (YYYY-MM-DD HH:MM:SS)
+# strict-iso8601 (YYYY-MM-DDTHH:MM:SS)
+#
+
+date_format=us
+
+
+
+# P1.PL FILE LOCATION
+# This value determines where the p1.pl perl script (used by the
+# embedded Perl interpreter) is located. If you didn't compile
+# Nagios with embedded Perl support, this option has no effect.
+
+p1_file=/usr/sbin/p1.pl
+
+
+
+# ILLEGAL OBJECT NAME CHARACTERS
+# This option allows you to specify illegal characters that cannot
+# be used in host names, service descriptions, or names of other
+# object types.
+
+illegal_object_name_chars=`~!$%^&*|'"<>?,()=
+
+
+
+# ILLEGAL MACRO OUTPUT CHARACTERS
+# This option allows you to specify illegal characters that are
+# stripped from macros before being used in notifications, event
+# handlers, etc. This DOES NOT affect macros used in service or
+# host check commands.
+# The following macros are stripped of the characters you specify:
+# $HOSTOUTPUT$
+# $HOSTPERFDATA$
+# $HOSTACKAUTHOR$
+# $HOSTACKCOMMENT$
+# $SERVICEOUTPUT$
+# $SERVICEPERFDATA$
+# $SERVICEACKAUTHOR$
+# $SERVICEACKCOMMENT$
+
+illegal_macro_output_chars=`~$&|'"<>
+
+
+
+# REGULAR EXPRESSION MATCHING
+# This option controls whether or not regular expression matching
+# takes place in the object config files. Regular expression
+# matching is used to match host, hostgroup, service, and service
+# group names/descriptions in some fields of various object types.
+# Values: 1 = enable regexp matching, 0 = disable regexp matching
+
+use_regexp_matching=0
+
+
+
+# "TRUE" REGULAR EXPRESSION MATCHING
+# This option controls whether or not "true" regular expression
+# matching takes place in the object config files. This option
+# only has an effect if regular expression matching is enabled
+# (see above). If this option is DISABLED, regular expression
+# matching only occurs if a string contains wildcard characters
+# (* and ?). If the option is ENABLED, regexp matching occurs
+# all the time (which can be annoying).
+# Values: 1 = enable true matching, 0 = disable true matching
+
+use_true_regexp_matching=0
+
+
+
+
+# ADMINISTRATOR EMAIL ADDRESS
+# The email address of the administrator of *this* machine (the one
+# doing the monitoring). Nagios never uses this value itself, but
+# you can access this value by using the $ADMINEMAIL$ macro in your
+# notification commands.
+
+admin_email=nagios
+
+
+
+# ADMINISTRATOR PAGER NUMBER/ADDRESS
+# The pager number/address for the administrator of *this* machine.
+# Nagios never uses this value itself, but you can access this
+# value by using the $ADMINPAGER$ macro in your notification
+# commands.
+
+admin_pager=pagenagios
+
+
+
+# DAEMON CORE DUMP OPTION
+# This option determines whether or not Nagios is allowed to create
+# a core dump when it runs as a daemon. Note that it is generally
+# considered bad form to allow this, but it may be useful for
+# debugging purposes.
+# Values: 1 - Allow core dumps
+# 0 - Do not allow core dumps (default)
+
+daemon_dumps_core=0
+
+
+
diff --git a/puppet/modules/nagios/files/configs/CentOS/private/resource.cfg.i386 b/puppet/modules/nagios/files/configs/CentOS/private/resource.cfg.i386
new file mode 100644
index 00000000..0ccf2e17
--- /dev/null
+++ b/puppet/modules/nagios/files/configs/CentOS/private/resource.cfg.i386
@@ -0,0 +1,34 @@
+###########################################################################
+#
+# RESOURCE.CFG - Sample Resource File for Nagios 2.9
+#
+# Last Modified: 09-10-2003
+#
+# You can define $USERx$ macros in this file, which can in turn be used
+# in command definitions in your host config file(s). $USERx$ macros are
+# useful for storing sensitive information such as usernames, passwords,
+# etc. They are also handy for specifying the path to plugins and
+# event handlers - if you decide to move the plugins or event handlers to
+# a different directory in the future, you can just update one or two
+# $USERx$ macros, instead of modifying a lot of command definitions.
+#
+# The CGIs will not attempt to read the contents of resource files, so
+# you can set restrictive permissions (600 or 660) on them.
+#
+# Nagios supports up to 32 $USERx$ macros ($USER1$ through $USER32$)
+#
+# Resource files may also be used to store configuration directives for
+# external data sources like MySQL...
+#
+###########################################################################
+
+# Sets $USER1$ to be the path to the plugins
+$USER1$=/usr/lib/nagios/plugins
+
+# Sets $USER2$ to be the path to event handlers
+#$USER2$=/usr/lib64/nagios/plugins/eventhandlers
+
+# Store some usernames and passwords (hidden from the CGIs)
+#$USER3$=someuser
+#$USER4$=somepassword
+
diff --git a/puppet/modules/nagios/files/configs/CentOS/private/resource.cfg.x86_64 b/puppet/modules/nagios/files/configs/CentOS/private/resource.cfg.x86_64
new file mode 100644
index 00000000..b9f0841c
--- /dev/null
+++ b/puppet/modules/nagios/files/configs/CentOS/private/resource.cfg.x86_64
@@ -0,0 +1,34 @@
+###########################################################################
+#
+# RESOURCE.CFG - Sample Resource File for Nagios 2.9
+#
+# Last Modified: 09-10-2003
+#
+# You can define $USERx$ macros in this file, which can in turn be used
+# in command definitions in your host config file(s). $USERx$ macros are
+# useful for storing sensitive information such as usernames, passwords,
+# etc. They are also handy for specifying the path to plugins and
+# event handlers - if you decide to move the plugins or event handlers to
+# a different directory in the future, you can just update one or two
+# $USERx$ macros, instead of modifying a lot of command definitions.
+#
+# The CGIs will not attempt to read the contents of resource files, so
+# you can set restrictive permissions (600 or 660) on them.
+#
+# Nagios supports up to 32 $USERx$ macros ($USER1$ through $USER32$)
+#
+# Resource files may also be used to store configuration directives for
+# external data sources like MySQL...
+#
+###########################################################################
+
+# Sets $USER1$ to be the path to the plugins
+$USER1$=/usr/lib64/nagios/plugins
+
+# Sets $USER2$ to be the path to event handlers
+#$USER2$=/usr/lib64/nagios/plugins/eventhandlers
+
+# Store some usernames and passwords (hidden from the CGIs)
+#$USER3$=someuser
+#$USER4$=somepassword
+