summaryrefslogtreecommitdiff
path: root/puppet/modules/apache/files/config
diff options
context:
space:
mode:
authorMicah <micah@leap.se>2016-07-12 16:45:58 -0400
committerMicah <micah@leap.se>2016-07-12 16:45:58 -0400
commit4aff06cc2fecc0b59728d7fc825fb36394b847b7 (patch)
tree3668fd7666051bfd5e6b5b79a7238e54962e3948 /puppet/modules/apache/files/config
parentf2019755fd724fb1020cb2d97cdf82b751450ebc (diff)
git subrepo clone https://leap.se/git/puppet_apache puppet/modules/apache
subrepo: subdir: "puppet/modules/apache" merged: "415e950" upstream: origin: "https://leap.se/git/puppet_apache" branch: "master" commit: "415e950" git-subrepo: version: "0.3.0" origin: "https://github.com/ingydotnet/git-subrepo" commit: "1e79595" Change-Id: Iba7353669969a09c0b4bbd63add67e3245b05ede
Diffstat (limited to 'puppet/modules/apache/files/config')
-rw-r--r--puppet/modules/apache/files/config/Debian.jessie/apache2.conf221
-rw-r--r--puppet/modules/apache/files/config/Debian.wheezy/apache2.conf268
-rw-r--r--puppet/modules/apache/files/config/Debian/apache2.conf230
-rw-r--r--puppet/modules/apache/files/config/OpenBSD/httpd.conf1120
4 files changed, 1839 insertions, 0 deletions
diff --git a/puppet/modules/apache/files/config/Debian.jessie/apache2.conf b/puppet/modules/apache/files/config/Debian.jessie/apache2.conf
new file mode 100644
index 00000000..7b1f96f5
--- /dev/null
+++ b/puppet/modules/apache/files/config/Debian.jessie/apache2.conf
@@ -0,0 +1,221 @@
+# This is the main Apache server configuration file. It contains the
+# configuration directives that give the server its instructions.
+# See http://httpd.apache.org/docs/2.4/ for detailed information about
+# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
+# hints.
+#
+#
+# Summary of how the Apache 2 configuration works in Debian:
+# The Apache 2 web server configuration in Debian is quite different to
+# upstream's suggested way to configure the web server. This is because Debian's
+# default Apache2 installation attempts to make adding and removing modules,
+# virtual hosts, and extra configuration directives as flexible as possible, in
+# order to make automating the changes and administering the server as easy as
+# possible.
+
+# It is split into several files forming the configuration hierarchy outlined
+# below, all located in the /etc/apache2/ directory:
+#
+# /etc/apache2/
+# |-- apache2.conf
+# | `-- ports.conf
+# |-- mods-enabled
+# | |-- *.load
+# | `-- *.conf
+# |-- conf-enabled
+# | `-- *.conf
+# `-- sites-enabled
+# `-- *.conf
+#
+#
+# * apache2.conf is the main configuration file (this file). It puts the pieces
+# together by including all remaining configuration files when starting up the
+# web server.
+#
+# * ports.conf is always included from the main configuration file. It is
+# supposed to determine listening ports for incoming connections which can be
+# customized anytime.
+#
+# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
+# directories contain particular configuration snippets which manage modules,
+# global configuration fragments, or virtual host configurations,
+# respectively.
+#
+# They are activated by symlinking available configuration files from their
+# respective *-available/ counterparts. These should be managed by using our
+# helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
+# their respective man pages for detailed information.
+#
+# * The binary is called apache2. Due to the use of environment variables, in
+# the default configuration, apache2 needs to be started/stopped with
+# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
+# work with the default configuration.
+
+
+# Global configuration
+#
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# NOTE! If you intend to place this on an NFS (or otherwise network)
+# mounted filesystem then please read the Mutex documentation (available
+# at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
+# you will save yourself a lot of trouble.
+#
+# Do NOT add a slash at the end of the directory path.
+#
+#ServerRoot "/etc/apache2"
+
+#
+# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
+#
+Mutex file:${APACHE_LOCK_DIR} default
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+# This needs to be set in /etc/apache2/envvars
+#
+PidFile ${APACHE_PID_FILE}
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 5
+
+
+# These need to be set in /etc/apache2/envvars
+User ${APACHE_RUN_USER}
+Group ${APACHE_RUN_GROUP}
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here. If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog ${APACHE_LOG_DIR}/error.log
+
+#
+# LogLevel: Control the severity of messages logged to the error_log.
+# Available values: trace8, ..., trace1, debug, info, notice, warn,
+# error, crit, alert, emerg.
+# It is also possible to configure the log level for particular modules, e.g.
+# "LogLevel info ssl:warn"
+#
+LogLevel warn
+
+# Include module configuration:
+IncludeOptional mods-enabled/*.load
+IncludeOptional mods-enabled/*.conf
+
+# Include list of ports to listen on
+Include ports.conf
+
+
+# Sets the default security model of the Apache2 HTTPD server. It does
+# not allow access to the root filesystem outside of /usr/share and /var/www.
+# The former is used by web applications packaged in Debian,
+# the latter may be used for local directories served by the web server. If
+# your system is serving content from a sub-directory in /srv you must allow
+# access here, or in any related virtual host.
+<Directory />
+ Options FollowSymLinks
+ AllowOverride None
+ Require all denied
+</Directory>
+
+<Directory /usr/share>
+ AllowOverride None
+ Require all granted
+</Directory>
+
+<Directory /var/www/>
+ Options Indexes FollowSymLinks
+ AllowOverride None
+ Require all granted
+</Directory>
+
+#<Directory /srv/>
+# Options Indexes FollowSymLinks
+# AllowOverride None
+# Require all granted
+#</Directory>
+
+
+
+
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives. See also the AllowOverride
+# directive.
+#
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+#
+<FilesMatch "^\.ht">
+ Require all denied
+</FilesMatch>
+
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive.
+#
+# These deviate from the Common Log Format definitions in that they use %O
+# (the actual bytes sent including headers) instead of %b (the size of the
+# requested file), because the latter makes it impossible to detect partial
+# requests.
+#
+# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
+# Use mod_remoteip instead.
+#
+LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
+LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %O" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+# Include of directories ignores editors' and dpkg's backup files,
+# see README.Debian for details.
+
+# Include generic snippets of statements
+IncludeOptional conf-enabled/*.conf
+
+# Include the virtual host configurations:
+IncludeOptional sites-enabled/*.conf
+
+# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
diff --git a/puppet/modules/apache/files/config/Debian.wheezy/apache2.conf b/puppet/modules/apache/files/config/Debian.wheezy/apache2.conf
new file mode 100644
index 00000000..50545671
--- /dev/null
+++ b/puppet/modules/apache/files/config/Debian.wheezy/apache2.conf
@@ -0,0 +1,268 @@
+# This is the main Apache server configuration file. It contains the
+# configuration directives that give the server its instructions.
+# See http://httpd.apache.org/docs/2.2/ for detailed information about
+# the directives and /usr/share/doc/apache2-common/README.Debian.gz about
+# Debian specific hints.
+#
+#
+# Summary of how the Apache 2 configuration works in Debian:
+# The Apache 2 web server configuration in Debian is quite different to
+# upstream's suggested way to configure the web server. This is because Debian's
+# default Apache2 installation attempts to make adding and removing modules,
+# virtual hosts, and extra configuration directives as flexible as possible, in
+# order to make automating the changes and administering the server as easy as
+# possible.
+
+# It is split into several files forming the configuration hierarchy outlined
+# below, all located in the /etc/apache2/ directory:
+#
+# /etc/apache2/
+# |-- apache2.conf
+# | `-- ports.conf
+# |-- mods-enabled
+# | |-- *.load
+# | `-- *.conf
+# |-- conf.d
+# | `-- *
+# `-- sites-enabled
+# `-- *
+#
+#
+# * apache2.conf is the main configuration file (this file). It puts the pieces
+# together by including all remaining configuration files when starting up the
+# web server.
+#
+# In order to avoid conflicts with backup files, the Include directive is
+# adapted to ignore files that:
+# - do not begin with a letter or number
+# - contain a character that is neither letter nor number nor _-:.
+# - contain .dpkg
+#
+# Yet we strongly suggest that all configuration files either end with a
+# .conf or .load suffix in the file name. The next Debian release will
+# ignore files not ending with .conf (or .load for mods-enabled).
+#
+# * ports.conf is always included from the main configuration file. It is
+# supposed to determine listening ports for incoming connections, and which
+# of these ports are used for name based virtual hosts.
+#
+# * Configuration files in the mods-enabled/ and sites-enabled/ directories
+# contain particular configuration snippets which manage modules or virtual
+# host configurations, respectively.
+#
+# They are activated by symlinking available configuration files from their
+# respective *-available/ counterparts. These should be managed by using our
+# helpers a2enmod/a2dismod, a2ensite/a2dissite. See
+# their respective man pages for detailed information.
+#
+# * Configuration files in the conf.d directory are either provided by other
+# packages or may be added by the local administrator. Local additions
+# should start with local- or end with .local.conf to avoid name clashes. All
+# files in conf.d are considered (excluding the exceptions noted above) by
+# the Apache 2 web server.
+#
+# * The binary is called apache2. Due to the use of environment variables, in
+# the default configuration, apache2 needs to be started/stopped with
+# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
+# work with the default configuration.
+
+
+# Global configuration
+#
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# NOTE! If you intend to place this on an NFS (or otherwise network)
+# mounted filesystem then please read the LockFile documentation (available
+# at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
+# you will save yourself a lot of trouble.
+#
+# Do NOT add a slash at the end of the directory path.
+#
+#ServerRoot "/etc/apache2"
+
+#
+# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
+#
+LockFile ${APACHE_LOCK_DIR}/accept.lock
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+# This needs to be set in /etc/apache2/envvars
+#
+PidFile ${APACHE_PID_FILE}
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 5
+
+##
+## Server-Pool Size Regulation (MPM specific)
+##
+
+# prefork MPM
+# StartServers: number of server processes to start
+# MinSpareServers: minimum number of server processes which are kept spare
+# MaxSpareServers: maximum number of server processes which are kept spare
+# MaxClients: maximum number of server processes allowed to start
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_prefork_module>
+ StartServers 5
+ MinSpareServers 5
+ MaxSpareServers 10
+ MaxClients 150
+ MaxRequestsPerChild 0
+</IfModule>
+
+# worker MPM
+# StartServers: initial number of server processes to start
+# MinSpareThreads: minimum number of worker threads which are kept spare
+# MaxSpareThreads: maximum number of worker threads which are kept spare
+# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a
+# graceful restart. ThreadLimit can only be changed by stopping
+# and starting Apache.
+# ThreadsPerChild: constant number of worker threads in each server process
+# MaxClients: maximum number of simultaneous client connections
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_worker_module>
+ StartServers 2
+ MinSpareThreads 25
+ MaxSpareThreads 75
+ ThreadLimit 64
+ ThreadsPerChild 25
+ MaxClients 150
+ MaxRequestsPerChild 0
+</IfModule>
+
+# event MPM
+# StartServers: initial number of server processes to start
+# MinSpareThreads: minimum number of worker threads which are kept spare
+# MaxSpareThreads: maximum number of worker threads which are kept spare
+# ThreadsPerChild: constant number of worker threads in each server process
+# MaxClients: maximum number of simultaneous client connections
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_event_module>
+ StartServers 2
+ MinSpareThreads 25
+ MaxSpareThreads 75
+ ThreadLimit 64
+ ThreadsPerChild 25
+ MaxClients 150
+ MaxRequestsPerChild 0
+</IfModule>
+
+# These need to be set in /etc/apache2/envvars
+User ${APACHE_RUN_USER}
+Group ${APACHE_RUN_GROUP}
+
+#
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives. See also the AllowOverride
+# directive.
+#
+
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+#
+<Files ~ "^\.ht">
+ Order allow,deny
+ Deny from all
+ Satisfy all
+</Files>
+
+#
+# DefaultType is the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value. If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+# It is also possible to omit any default MIME type and let the
+# client's browser guess an appropriate action instead. Typically the
+# browser will decide based on the file's extension then. In cases
+# where no good assumption can be made, letting the default MIME type
+# unset is suggested instead of forcing the browser to accept
+# incorrect metadata.
+#
+DefaultType None
+
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here. If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog ${APACHE_LOG_DIR}/error.log
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+# Include module configuration:
+Include mods-enabled/*.load
+Include mods-enabled/*.conf
+
+# Include list of ports to listen on and which to use for name based vhosts
+Include ports.conf
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
+#
+LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
+LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %O" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+# Include of directories ignores editors' and dpkg's backup files,
+# see the comments above for details.
+
+# Include generic snippets of statements
+Include conf.d/
+
+# Include the virtual host configurations:
+Include sites-enabled/
diff --git a/puppet/modules/apache/files/config/Debian/apache2.conf b/puppet/modules/apache/files/config/Debian/apache2.conf
new file mode 100644
index 00000000..1e97b4eb
--- /dev/null
+++ b/puppet/modules/apache/files/config/Debian/apache2.conf
@@ -0,0 +1,230 @@
+#
+# Based upon the NCSA server configuration files originally by Rob McCool.
+#
+# This is the main Apache server configuration file. It contains the
+# configuration directives that give the server its instructions.
+# See http://httpd.apache.org/docs/2.2/ for detailed information about
+# the directives.
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do. They're here only as hints or reminders. If you are unsure
+# consult the online docs. You have been warned.
+#
+# The configuration directives are grouped into three basic sections:
+# 1. Directives that control the operation of the Apache server process as a
+# whole (the 'global environment').
+# 2. Directives that define the parameters of the 'main' or 'default' server,
+# which responds to requests that aren't handled by a virtual host.
+# These directives also provide default values for the settings
+# of all virtual hosts.
+# 3. Settings for virtual hosts, which allow Web requests to be sent to
+# different IP addresses or hostnames and have them handled by the
+# same Apache server process.
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path. If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "foo.log"
+# with ServerRoot set to "/etc/apache2" will be interpreted by the
+# server as "/etc/apache2/foo.log".
+#
+
+### Section 1: Global Environment
+#
+# The directives in this section affect the overall operation of Apache,
+# such as the number of concurrent requests it can handle or where it
+# can find its configuration files.
+#
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# NOTE! If you intend to place this on an NFS (or otherwise network)
+# mounted filesystem then please read the LockFile documentation (available
+# at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
+# you will save yourself a lot of trouble.
+#
+# Do NOT add a slash at the end of the directory path.
+#
+#ServerRoot "/etc/apache2"
+
+#
+# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
+#
+LockFile ${APACHE_LOCK_DIR}/accept.lock
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+# This needs to be set in /etc/apache2/envvars
+#
+PidFile ${APACHE_PID_FILE}
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 15
+
+##
+## Server-Pool Size Regulation (MPM specific)
+##
+
+# prefork MPM
+# StartServers: number of server processes to start
+# MinSpareServers: minimum number of server processes which are kept spare
+# MaxSpareServers: maximum number of server processes which are kept spare
+# MaxClients: maximum number of server processes allowed to start
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_prefork_module>
+ StartServers 5
+ MinSpareServers 5
+ MaxSpareServers 10
+ MaxClients 150
+ MaxRequestsPerChild 0
+</IfModule>
+
+# worker MPM
+# StartServers: initial number of server processes to start
+# MaxClients: maximum number of simultaneous client connections
+# MinSpareThreads: minimum number of worker threads which are kept spare
+# MaxSpareThreads: maximum number of worker threads which are kept spare
+# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a
+# graceful restart. ThreadLimit can only be changed by stopping
+# and starting Apache.
+# ThreadsPerChild: constant number of worker threads in each server process
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_worker_module>
+ StartServers 2
+ MinSpareThreads 25
+ MaxSpareThreads 75
+ ThreadLimit 64
+ ThreadsPerChild 25
+ MaxClients 150
+ MaxRequestsPerChild 0
+</IfModule>
+
+# event MPM
+# StartServers: initial number of server processes to start
+# MaxClients: maximum number of simultaneous client connections
+# MinSpareThreads: minimum number of worker threads which are kept spare
+# MaxSpareThreads: maximum number of worker threads which are kept spare
+# ThreadsPerChild: constant number of worker threads in each server process
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_event_module>
+ StartServers 2
+ MaxClients 150
+ MinSpareThreads 25
+ MaxSpareThreads 75
+ ThreadLimit 64
+ ThreadsPerChild 25
+ MaxRequestsPerChild 0
+</IfModule>
+
+# These need to be set in /etc/apache2/envvars
+User ${APACHE_RUN_USER}
+Group ${APACHE_RUN_GROUP}
+
+#
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives. See also the AllowOverride
+# directive.
+#
+
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+#
+<Files ~ "^\.ht">
+ Order allow,deny
+ Deny from all
+ Satisfy all
+</Files>
+
+#
+# DefaultType is the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value. If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here. If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog ${APACHE_LOG_DIR}/error.log
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+# Include module configuration:
+Include mods-enabled/*.load
+Include mods-enabled/*.conf
+
+# Include all the user configurations:
+Include httpd.conf
+
+# Include ports listing
+Include ports.conf
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
+#
+LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
+LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %O" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+# Include of directories ignores editors' and dpkg's backup files,
+# see README.Debian for details.
+
+# Include generic snippets of statements
+Include conf.d/
+
+# Include the virtual host configurations:
+Include sites-enabled/
diff --git a/puppet/modules/apache/files/config/OpenBSD/httpd.conf b/puppet/modules/apache/files/config/OpenBSD/httpd.conf
new file mode 100644
index 00000000..09e452e6
--- /dev/null
+++ b/puppet/modules/apache/files/config/OpenBSD/httpd.conf
@@ -0,0 +1,1120 @@
+# $OpenBSD: httpd.conf,v 1.22 2008/01/25 09:59:57 sthen Exp $
+#
+# Based upon the NCSA server configuration files originally by Rob McCool.
+#
+# This is the main Apache server configuration file. It contains the
+# configuration directives that give the server its instructions.
+# See <URL:http://www.apache.org/docs/> for detailed information about
+# the directives.
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do. They're here only as hints or reminders. If you are unsure
+# consult the online docs. You have been warned.
+#
+# After this file is processed, the server will look for and process
+# /var/www/conf/srm.conf and then /var/www/conf/access.conf
+# unless you have overridden these with ResourceConfig and/or
+# AccessConfig directives here.
+#
+# The configuration directives are grouped into three basic sections:
+# 1. Directives that control the operation of the Apache server process as a
+# whole (the 'global environment').
+# 2. Directives that define the parameters of the 'main' or 'default' server,
+# which responds to requests that aren't handled by a virtual host.
+# These directives also provide default values for the settings
+# of all virtual hosts.
+# 3. Settings for virtual hosts, which allow Web requests to be sent to
+# different IP addresses or hostnames and have them handled by the
+# same Apache server process.
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path. If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
+# with ServerRoot set to "/usr/local/apache" will be interpreted by the
+# server as "/usr/local/apache/logs/foo.log".
+#
+
+### Section 1: Global Environment
+#
+# The directives in this section affect the overall operation of Apache,
+# such as the number of concurrent requests it can handle or where it
+# can find its configuration files.
+#
+
+#
+# ServerType is either inetd, or standalone. Inetd mode is only supported on
+# Unix platforms.
+#
+ServerType standalone
+
+#
+# ServerTokens is either Full, OS, Minimal, or ProductOnly.
+# The values define what version information is returned in the
+# Server header in HTTP responses.
+#
+# ServerTokens ProductOnly
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# NOTE! If you intend to place this on an NFS (or otherwise network)
+# mounted filesystem then please read the LockFile documentation
+# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
+# you will save yourself a lot of trouble.
+#
+# Do NOT add a slash at the end of the directory path.
+#
+ServerRoot "/var/www"
+
+#
+# The LockFile directive sets the path to the lockfile used when Apache
+# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
+# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
+# its default value. The main reason for changing it is if the logs
+# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
+# DISK. The PID of the main server process is automatically appended to
+# the filename.
+#
+#LockFile logs/accept.lock
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+#
+PidFile logs/httpd.pid
+#
+# ScoreBoardFile: File used to store internal server process information.
+# Not all architectures require this. But if yours does (you'll know because
+# this file will be created when you run Apache) then you *must* ensure that
+# no two invocations of Apache share the same scoreboard file.
+#
+ScoreBoardFile logs/apache_runtime_status
+
+#
+# In the standard configuration, the server will process httpd.conf,
+# srm.conf, and access.conf in that order. The latter two files are
+# now deprecated and not installed any more, as it is recommended that
+# all directives be kept in a single file for simplicity.
+#
+#ResourceConfig conf/srm.conf
+#AccessConfig conf/access.conf
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 15
+
+#
+# Server-pool size regulation. Rather than making you guess how many
+# server processes you need, Apache dynamically adapts to the load it
+# sees --- that is, it tries to maintain enough server processes to
+# handle the current load, plus a few spare servers to handle transient
+# load spikes (e.g., multiple simultaneous requests from a single
+# Netscape browser).
+#
+# It does this by periodically checking how many servers are waiting
+# for a request. If there are fewer than MinSpareServers, it creates
+# a new spare. If there are more than MaxSpareServers, some of the
+# spares die off. The default values in httpd.conf-dist are probably OK
+# for most sites.
+#
+MinSpareServers 5
+MaxSpareServers 10
+
+#
+# Number of servers to start initially --- should be a reasonable ballpark
+# figure.
+#
+StartServers 5
+
+#
+# Limit on total number of servers running, i.e., limit on the number
+# of clients who can simultaneously connect --- if this limit is ever
+# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
+# It is intended mainly as a brake to keep a runaway server from taking
+# the system with it as it spirals down...
+#
+MaxClients 150
+
+#
+# MaxRequestsPerChild: the number of requests each child process is
+# allowed to process before the child dies. The child will exit so
+# as to avoid problems after prolonged use when Apache (and maybe the
+# libraries it uses) leak memory or other resources. On most systems, this
+# isn't really needed, but a few (such as Solaris) do have notable leaks
+# in the libraries.
+#
+MaxRequestsPerChild 0
+
+#
+# MaxFOOPerChild: these directives set the current and hard rlimits for
+# the child processes. Attempts to exceed them will cause the the OS to
+# take appropriate action. See the setrlimit(2) and signal(3).
+#
+MaxCPUPerChild 0
+MaxDATAPerChild 0
+MaxNOFILEPerChild 0
+MaxRSSPerChild 0
+MaxSTACKPerChild 0
+
+#
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, in addition to the default. See also the <VirtualHost>
+# directive.
+#
+#Listen 3000
+#Listen 12.34.56.78:80
+
+#
+# BindAddress: You can support virtual hosts with this option. This directive
+# is used to tell the server which IP address to listen to. It can either
+# contain "*", an IP address, or a fully qualified Internet domain name.
+# See also the <VirtualHost> and Listen directives.
+#
+#BindAddress *
+
+#
+# Dynamic Shared Object (DSO) Support
+#
+# To be able to use the functionality of a module which was built as a DSO you
+# have to place corresponding `LoadModule' lines at this location so the
+# directives contained in it are actually available _before_ they are used.
+# Please read the file README.DSO in the Apache 1.3 distribution for more
+# details about the DSO mechanism and run `httpd -l' for the list of already
+# built-in (statically linked and thus always available) modules in your httpd
+# binary.
+#
+# Note: The order is which modules are loaded is important. Don't change
+# the order below without expert advice.
+#
+# Example:
+# LoadModule foo_module libexec/mod_foo.so
+
+# "anonymous" user access to authenticated areas
+# LoadModule anon_auth_module /usr/lib/apache/modules/mod_auth_anon.so
+
+# user authentication using Berkeley DB files
+# LoadModule db_auth_module /usr/lib/apache/modules/mod_auth_db.so
+
+# user authentication using DBM files
+# LoadModule dbm_auth_module /usr/lib/apache/modules/mod_auth_dbm.so
+
+# authentication using new-style MD5 Digest Authentication (experimental)
+# LoadModule digest_auth_module /usr/lib/apache/modules/mod_auth_digest.so
+
+# CERN httpd metafile semantics
+# LoadModule cern_meta_module /usr/lib/apache/modules/mod_cern_meta.so
+
+# configuration defines ($xxx)
+# LoadModule define_module /usr/lib/apache/modules/mod_define.so
+
+# user authentication using old-style MD5 Digest Authentication
+# LoadModule digest_module /usr/lib/apache/modules/mod_digest.so
+
+# generation of Expires HTTP headers according to user-specified criteria
+# LoadModule expires_module /usr/lib/apache/modules/mod_expires.so
+
+# customization of HTTP response headers
+# LoadModule headers_module /usr/lib/apache/modules/mod_headers.so
+
+# comprehensive overview of the server configuration
+# LoadModule info_module /usr/lib/apache/modules/mod_info.so
+
+# logging of the client user agents (deprecated in favor of mod_log_config)
+# LoadModule agent_log_module /usr/lib/apache/modules/mod_log_agent.so
+
+# logging of referers (deprecated in favor of mod_log_config)
+# LoadModule referer_log_module /usr/lib/apache/modules/mod_log_referer.so
+
+# determining the MIME type of a file by looking at a few bytes of its contents
+# LoadModule mime_magic_module /usr/lib/apache/modules/mod_mime_magic.so
+
+# mmap()ing of a statically configured list of frequently requested but
+# not changed files (experimental)
+# LoadModule mmap_static_module /usr/lib/apache/modules/mod_mmap_static.so
+
+# rule-based rewriting engine to rewrite requested URLs on the fly
+# LoadModule rewrite_module /usr/lib/apache/modules/mod_rewrite.so
+
+# attempt to correct misspellings of URLs that users might have entered
+# LoadModule speling_module /usr/lib/apache/modules/mod_speling.so
+
+# provides an environment variable with a unique identifier for each request
+# LoadModule unique_id_module /usr/lib/apache/modules/mod_unique_id.so
+
+# uses cookies to provide for a clickstream log of user activity on a site
+# LoadModule usertrack_module /usr/lib/apache/modules/mod_usertrack.so
+
+# dynamically configured mass virtual hosting
+# LoadModule vhost_alias_module /usr/lib/apache/modules/mod_vhost_alias.so
+
+# caching proxy
+# LoadModule proxy_module /usr/lib/apache/modules/libproxy.so
+
+#
+# Include extra module configuration files
+#
+Include /var/www/conf/modules/*.conf
+
+#
+# ExtendedStatus controls whether Apache will generate "full" status
+# information (ExtendedStatus On) or just basic information (ExtendedStatus
+# Off) when the "server-status" handler is called. The default is Off.
+#
+#ExtendedStatus On
+
+### Section 2: 'Main' server configuration
+#
+# The directives in this section set up the values used by the 'main'
+# server, which responds to any requests that aren't handled by a
+# <VirtualHost> definition. These values also provide defaults for
+# any <VirtualHost> containers you may define later in the file.
+#
+# All of these directives may appear inside <VirtualHost> containers,
+# in which case these default settings will be overridden for the
+# virtual host being defined.
+#
+
+#
+# If your ServerType directive (set earlier in the 'Global Environment'
+# section) is set to "inetd", the next few directives don't have any
+# effect since their settings are defined by the inetd configuration.
+# Skip ahead to the ServerAdmin directive.
+#
+
+#
+# Port: The port to which the standalone server listens. For
+# ports < 1023, you will need httpd to be run as root initially.
+#
+Port 80
+
+##
+## SSL Support
+##
+## When we also provide SSL we have to listen to the
+## standard HTTP port (see above) and to the HTTPS port
+##
+<IfDefine SSL>
+Listen 80
+Listen 443
+</IfDefine>
+
+#
+# If you wish httpd to run as a different user or group, you must run
+# httpd as root initially and it will switch.
+#
+# User/Group: The name (or #number) of the user/group to run httpd as.
+# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
+# . On HPUX you may not be able to use shared memory as nobody, and the
+# suggested workaround is to create a user www and use that user.
+# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
+# when the value of (unsigned)Group is above 60000;
+# don't use Group #-1 on these systems!
+# On OpenBSD, use user www, group www.
+#
+User www
+Group www
+
+#
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed. This address appears on some server-generated pages, such
+# as error documents.
+#
+ServerAdmin you@your.address
+
+#
+# ServerName allows you to set a host name which is sent back to clients for
+# your server if it's different than the one the program would get (i.e., use
+# "www" instead of the host's real name).
+#
+# Note: You cannot just invent host names and hope they work. The name you
+# define here must be a valid DNS name for your host. If you don't understand
+# this, ask your network administrator.
+# If your host doesn't have a registered DNS name, enter its IP address here.
+# You will have to access it by its address (e.g., http://123.45.67.89/)
+# anyway, and this will make redirections work in a sensible way.
+#
+#ServerName new.host.name
+
+#
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+DocumentRoot "/var/www/htdocs"
+
+#
+# Each directory to which Apache has access, can be configured with respect
+# to which services and features are allowed and/or disabled in that
+# directory (and its subdirectories).
+#
+# First, we configure the "default" to be a very restrictive set of
+# permissions.
+#
+<Directory />
+ Options FollowSymLinks
+ AllowOverride None
+</Directory>
+
+#
+# Note that from this point forward you must specifically allow
+# particular features to be enabled - so if something's not working as
+# you might expect, make sure that you have specifically enabled it
+# below.
+#
+
+#
+# This should be changed to whatever you set DocumentRoot to.
+#
+<Directory "/var/www/htdocs">
+
+#
+# This may also be "None", "All", or any combination of "Indexes",
+# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
+#
+# Note that "MultiViews" must be named *explicitly* --- "Options All"
+# doesn't give it to you.
+#
+ Options Indexes FollowSymLinks
+
+#
+# This controls which options the .htaccess files in directories can
+# override. Can also be "All", or any combination of "Options", "FileInfo",
+# "AuthConfig", and "Limit"
+#
+ AllowOverride None
+
+#
+# Controls who can get stuff from this server.
+#
+ Order allow,deny
+ Allow from all
+</Directory>
+
+#
+# UserDir: The directory which is prepended onto a users username, within
+# which a users's web pages are looked for if a ~user request is received.
+# Relative pathes are relative to the user's home directory.
+#
+# "disabled" turns this feature off.
+#
+# Since httpd will chroot(2) to the ServerRoot path by default,
+# you should use
+# UserDir /var/www/users
+# and create per user directories in /var/www/users/<username>
+#
+
+UserDir disabled
+
+#
+# Control access to UserDir directories. The following is an example
+# for a site where these directories are restricted to read-only and
+# are located under /users/<username>
+# You will need to change this to match your site's home directories.
+#
+#<Directory /users/*>
+# AllowOverride FileInfo AuthConfig Limit
+# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
+# <Limit GET POST OPTIONS PROPFIND>
+# Order allow,deny
+# Allow from all
+# </Limit>
+# <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
+# Order deny,allow
+# Deny from all
+# </Limit>
+#</Directory>
+
+#
+# DirectoryIndex: Name of the file or files to use as a pre-written HTML
+# directory index. Separate multiple entries with spaces.
+#
+DirectoryIndex index.html
+
+#
+# AccessFileName: The name of the file to look for in each directory
+# for access control information.
+#
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess files from being viewed by
+# Web clients. Since .htaccess files often contain authorization
+# information, access is disallowed for security reasons. Comment
+# these lines out if you want Web visitors to see the contents of
+# .htaccess files. If you change the AccessFileName directive above,
+# be sure to make the corresponding changes here.
+#
+<Files .htaccess>
+ Order allow,deny
+ Deny from all
+</Files>
+
+#
+# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
+# document that was negotiated on the basis of content. This asks proxy
+# servers not to cache the document. Uncommenting the following line disables
+# this behavior, and proxies will be allowed to cache the documents.
+#
+#CacheNegotiatedDocs
+
+#
+# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
+# Apache needs to construct a self-referencing URL (a URL that refers back
+# to the server the response is coming from) it will use ServerName and
+# Port to form a "canonical" name. With this setting off, Apache will
+# use the hostname:port that the client supplied, when possible. This
+# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
+#
+UseCanonicalName On
+
+#
+# TypesConfig describes where the mime.types file (or equivalent) is
+# to be found.
+#
+TypesConfig conf/mime.types
+
+#
+# DefaultType is the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value. If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+#
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type. The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+# mod_mime_magic is not part of the default server (you have to add
+# it yourself with a LoadModule [see the DSO paragraph in the 'Global
+# Environment' section], or recompile the server and include mod_mime_magic
+# as part of the configuration), so it's enclosed in an <IfModule> container.
+# This means that the MIMEMagicFile directive will only be processed if the
+# module is part of the server.
+#
+<IfModule mod_mime_magic.c>
+ MIMEMagicFile conf/magic
+</IfModule>
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+#
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here. If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+# Either a filename or the text "syslog:" followed by a facility
+# name may be specified here.
+#
+#ErrorLog syslog:daemon
+ErrorLog logs/error_log
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+#
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %b" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+#
+# The location and format of the access logfile (Common Logfile Format).
+# If you do not define any access logfiles within a <VirtualHost>
+# container, they will be logged here. Contrariwise, if you *do*
+# define per-<VirtualHost> access logfiles, transactions will be
+# logged therein and *not* in this file.
+#
+CustomLog logs/access_log common
+
+#
+# If you would like to have agent and referer logfiles, uncomment the
+# following directives.
+#
+#CustomLog logs/referer_log referer
+#CustomLog logs/agent_log agent
+
+#
+# If you prefer a single logfile with access, agent, and referer information
+# (Combined Logfile Format) you can use the following directive.
+#
+#CustomLog logs/access_log combined
+
+#
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (error documents, FTP directory listings,
+# mod_status and mod_info output etc., but not CGI generated documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of: On | Off | EMail
+#
+# ServerSignature Off
+
+#
+# Aliases: Add here as many aliases as you need (with no limit). The format is
+# Alias fakename realname
+#
+# Note that if you include a trailing / on fakename then the server will
+# require it to be present in the URL. So "/icons" isn't aliased in this
+# example, only "/icons/"..
+#
+Alias /icons/ "/var/www/icons/"
+
+<Directory "/var/www/icons">
+ Options Indexes MultiViews
+ AllowOverride None
+ Order allow,deny
+ Allow from all
+</Directory>
+
+<Directory "/var/www/htdocs/manual">
+ Options MultiViews
+ AllowOverride None
+ Order allow,deny
+ Allow from all
+</Directory>
+
+#
+# ScriptAlias: This controls which directories contain server scripts.
+# ScriptAliases are essentially the same as Aliases, except that
+# documents in the realname directory are treated as applications and
+# run by the server when requested rather than as documents sent to the client.
+# The same rules about trailing "/" apply to ScriptAlias directives as to
+# Alias.
+#
+ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
+
+#
+# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+#
+<Directory "/var/www/cgi-bin">
+ AllowOverride None
+ Options None
+ Order allow,deny
+ Allow from all
+</Directory>
+
+#
+# Redirect allows you to tell clients about documents which used to exist in
+# your server's namespace, but do not anymore. This allows you to tell the
+# clients where to look for the relocated document.
+# Format: Redirect old-URI new-URL
+#
+
+#
+# Directives controlling the display of server-generated directory listings.
+#
+
+#
+# FancyIndexing is whether you want fancy directory indexing or standard
+#
+IndexOptions FancyIndexing
+
+#
+# AddIcon* directives tell the server which icon to show for different
+# files or filename extensions. These are only displayed for
+# FancyIndexed directories.
+#
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+
+#
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+#
+DefaultIcon /icons/unknown.gif
+
+#
+# AddDescription allows you to place a short description after a file in
+# server-generated indexes. These are only displayed for FancyIndexed
+# directories.
+# Format: AddDescription "description" filename
+#
+#AddDescription "GZIP compressed document" .gz
+#AddDescription "tar archive" .tar
+#AddDescription "GZIP compressed tar archive" .tgz
+
+#
+# ReadmeName is the name of the README file the server will look for by
+# default, and append to directory listings.
+#
+# HeaderName is the name of a file which should be prepended to
+# directory indexes.
+#
+# The server will first look for name.html and include it if found.
+# If name.html doesn't exist, the server will then look for name.txt
+# and include it as plaintext if found.
+#
+ReadmeName README
+HeaderName HEADER
+
+#
+# IndexIgnore is a set of filenames which directory indexing should ignore
+# and not include in the listing. Shell-style wildcarding is permitted.
+#
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+
+#
+# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
+# information on the fly. Note: Not all browsers support this.
+# Despite the name similarity, the following Add* directives have nothing
+# to do with the FancyIndexing customization directives above.
+#
+AddEncoding x-compress Z
+AddEncoding x-gzip gz
+
+#
+# AddLanguage allows you to specify the language of a document. You can
+# then use content negotiation to give a browser a file in a language
+# it can understand. Note that the suffix does not have to be the same
+# as the language keyword --- those with documents in Polish (whose
+# net-standard language code is pl) may wish to use "AddLanguage pl .po"
+# to avoid the ambiguity with the common suffix for perl scripts.
+#
+AddLanguage en .en
+AddLanguage fr .fr
+AddLanguage de .de
+AddLanguage da .da
+AddLanguage el .el
+AddLanguage it .it
+
+#
+# LanguagePriority allows you to give precedence to some languages
+# in case of a tie during content negotiation.
+# Just list the languages in decreasing order of preference.
+#
+LanguagePriority en fr de
+
+#
+# AddType allows you to tweak mime.types without actually editing it, or to
+# make certain files to be certain types.
+#
+# For example, the PHP module (not part of the Apache distribution)
+# will typically use:
+#
+#AddType application/x-httpd-php .php
+
+#
+# AddHandler allows you to map certain file extensions to "handlers",
+# actions unrelated to filetype. These can be either built into the server
+# or added with the Action command (see below)
+#
+# If you want to use server side includes, or CGI outside
+# ScriptAliased directories, uncomment the following lines.
+#
+# To use CGI scripts:
+#
+#AddHandler cgi-script .cgi
+
+#
+# To use server-parsed HTML files
+#
+#AddType text/html .shtml
+#AddHandler server-parsed .shtml
+
+#
+# Uncomment the following line to enable Apache's send-asis HTTP file
+# feature
+#
+#AddHandler send-as-is asis
+
+#
+# If you wish to use server-parsed imagemap files, use
+#
+#AddHandler imap-file map
+
+#
+# To enable type maps, you might want to use
+#
+#AddHandler type-map var
+
+#
+# Action lets you define media types that will execute a script whenever
+# a matching file is called. This eliminates the need for repeated URL
+# pathnames for oft-used CGI file processors.
+# Format: Action media/type /cgi-script/location
+# Format: Action handler-name /cgi-script/location
+#
+
+#
+# MetaDir: specifies the name of the directory in which Apache can find
+# meta information files. These files contain additional HTTP headers
+# to include when sending the document
+#
+#MetaDir .web
+
+#
+# MetaSuffix: specifies the file name suffix for the file containing the
+# meta information.
+#
+#MetaSuffix .meta
+
+#
+# Customizable error response (Apache style)
+# these come in three flavors
+#
+# 1) plain text
+#ErrorDocument 500 "The server made a boo boo.
+# n.b. the (") marks it as text, it does not get output
+#
+# 2) local redirects
+#ErrorDocument 404 /missing.html
+# to redirect to local URL /missing.html
+#ErrorDocument 404 /cgi-bin/missing_handler.pl
+# N.B.: You can redirect to a script or a document using server-side-includes.
+#
+# 3) external redirects
+#ErrorDocument 402 http://some.other_server.com/subscription_info.html
+# N.B.: Many of the environment variables associated with the original
+# request will *not* be available to such a script.
+
+#
+# The following directives modify normal HTTP response behavior.
+# The first directive disables keepalive for Netscape 2.x and browsers that
+# spoof it. There are known problems with these browser implementations.
+# The second directive is for Microsoft Internet Explorer 4.0b2
+# which has a broken HTTP/1.1 implementation and does not properly
+# support keepalive when it is used on 301 or 302 (redirect) responses.
+#
+BrowserMatch "Mozilla/2" nokeepalive
+BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
+
+#
+# The following directive disables HTTP/1.1 responses to browsers which
+# are in violation of the HTTP/1.0 spec by not being able to grok a
+# basic 1.1 response.
+#
+BrowserMatch "RealPlayer 4\.0" force-response-1.0
+BrowserMatch "Java/1\.0" force-response-1.0
+BrowserMatch "JDK/1\.0" force-response-1.0
+
+#
+# Allow server status reports, with the URL of http://servername/server-status
+# Change the ".your_domain.com" to match your domain to enable.
+#
+#<Location /server-status>
+# SetHandler server-status
+# Order deny,allow
+# Deny from all
+# Allow from .your_domain.com
+#</Location>
+
+#
+# Allow remote server configuration reports, with the URL of
+# http://servername/server-info (requires that mod_info.c be loaded).
+# Change the ".your_domain.com" to match your domain to enable.
+#
+#<Location /server-info>
+# SetHandler server-info
+# Order deny,allow
+# Deny from all
+# Allow from .your_domain.com
+#</Location>
+
+#
+# There have been reports of people trying to abuse an old bug from pre-1.1
+# days. This bug involved a CGI script distributed as a part of Apache.
+# By uncommenting these lines you can redirect these attacks to a logging
+# script on phf.apache.org. Or, you can record them yourself, using the script
+# support/phf_abuse_log.cgi.
+#
+#<Location /cgi-bin/phf*>
+# Deny from all
+# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
+#</Location>
+
+#
+# Proxy Server directives. Uncomment the following lines to
+# enable the proxy server:
+#
+#<IfModule mod_proxy.c>
+#ProxyRequests On
+#
+#<Directory proxy:*>
+# Order deny,allow
+# Deny from all
+# Allow from .your_domain.com
+#</Directory>
+
+#
+# Enable/disable the handling of HTTP/1.1 "Via:" headers.
+# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
+# Set to one of: Off | On | Full | Block
+#
+#ProxyVia On
+
+#
+# To enable the cache as well, edit and uncomment the following lines:
+# (no cacheing without CacheRoot)
+#
+#CacheRoot "/var/www/proxy"
+#CacheSize 5
+#CacheGcInterval 4
+#CacheMaxExpire 24
+#CacheLastModifiedFactor 0.1
+#CacheDefaultExpire 1
+#NoCache a_domain.com another_domain.edu joes.garage_sale.com
+
+#</IfModule>
+# End of proxy directives.
+
+### Section 3: Virtual Hosts
+#
+# VirtualHost: If you want to maintain multiple domains/hostnames on your
+# machine you can setup VirtualHost containers for them.
+# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
+# for further details before you try to setup virtual hosts.
+# You may use the command line option '-S' to verify your virtual host
+# configuration.
+
+#
+# If you want to use name-based virtual hosts you need to define at
+# least one IP address (and port number) for them.
+#
+#NameVirtualHost 12.34.56.78:80
+#NameVirtualHost 12.34.56.78
+
+#
+# VirtualHost example:
+# Almost any Apache directive may go into a VirtualHost container.
+#
+#<VirtualHost ip.address.of.host.some_domain.com>
+# ServerAdmin webmaster@host.some_domain.com
+# DocumentRoot /www/docs/host.some_domain.com
+# ServerName host.some_domain.com
+# ErrorLog logs/host.some_domain.com-error_log
+# CustomLog logs/host.some_domain.com-access_log common
+#</VirtualHost>
+
+#<VirtualHost _default_:*>
+#</VirtualHost>
+
+
+##
+## SSL Global Context
+##
+## All SSL configuration in this context applies both to
+## the main server and all SSL-enabled virtual hosts.
+##
+
+#
+# Some MIME-types for downloading Certificates and CRLs
+#
+<IfDefine SSL>
+AddType application/x-x509-ca-cert .crt
+AddType application/x-pkcs7-crl .crl
+</IfDefine>
+
+<IfModule mod_ssl.c>
+
+# Pass Phrase Dialog:
+# Configure the pass phrase gathering process.
+# The filtering dialog program (`builtin' is a internal
+# terminal dialog) has to provide the pass phrase on stdout.
+SSLPassPhraseDialog builtin
+
+# Inter-Process Session Cache:
+# Configure the SSL Session Cache: First either `none'
+# or `dbm:/path/to/file' for the mechanism to use and
+# second the expiring timeout (in seconds).
+SSLSessionCache dbm:logs/ssl_scache
+SSLSessionCacheTimeout 300
+
+# Semaphore:
+# Configure the path to the mutual exclusion semaphore the
+# SSL engine uses internally for inter-process synchronization.
+SSLMutex sem
+
+# Pseudo Random Number Generator (PRNG):
+# Configure one or more sources to seed the PRNG of the
+# SSL library. The seed data should be of good random quality.
+SSLRandomSeed startup builtin
+SSLRandomSeed connect builtin
+#SSLRandomSeed startup file:/dev/random 512
+#SSLRandomSeed startup file:/dev/urandom 512
+#SSLRandomSeed connect file:/dev/random 512
+#SSLRandomSeed connect file:/dev/urandom 512
+SSLRandomSeed startup file:/dev/arandom 512
+
+# Logging:
+# The home of the dedicated SSL protocol logfile. Errors are
+# additionally duplicated in the general error log file. Put
+# this somewhere where it cannot be used for symlink attacks on
+# a real server (i.e. somewhere where only root can write).
+# Log levels are (ascending order: higher ones include lower ones):
+# none, error, warn, info, trace, debug.
+SSLLog logs/ssl_engine_log
+SSLLogLevel info
+
+</IfModule>
+
+<IfDefine SSL>
+
+##
+## SSL Virtual Host Context
+##
+
+<VirtualHost _default_:443>
+
+# General setup for the virtual host
+DocumentRoot /var/www/htdocs
+ServerName new.host.name
+ServerAdmin you@your.address
+ErrorLog logs/error_log
+TransferLog logs/access_log
+
+# SSL Engine Switch:
+# Enable/Disable SSL for this virtual host.
+SSLEngine on
+
+# SSL Cipher Suite:
+# List the ciphers that the client is permitted to negotiate.
+# See the mod_ssl documentation for a complete list.
+#SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP
+
+# Server Certificate:
+# Point SSLCertificateFile at a PEM encoded certificate. If
+# the certificate is encrypted, then you will be prompted for a
+# pass phrase. Note that a kill -HUP will prompt again. A test
+# certificate can be generated with `make certificate' under
+# built time.
+SSLCertificateFile /etc/ssl/server.crt
+
+# Server Private Key:
+# If the key is not combined with the certificate, use this
+# directive to point at the key file.
+SSLCertificateKeyFile /etc/ssl/private/server.key
+
+# Certificate Authority (CA):
+# Set the CA certificate verification path where to find CA
+# certificates for client authentication or alternatively one
+# huge file containing all of them (file must be PEM encoded)
+# Note: Inside SSLCACertificatePath you need hash symlinks
+# to point to the certificate files. Use the provided
+# Makefile to update the hash symlinks after changes.
+#SSLCACertificatePath /var/www/conf/ssl.crt
+#SSLCACertificateFile /var/www/conf/ssl.crt/ca-bundle.crt
+
+# Client Authentication (Type):
+# Client certificate verification type and depth. Types are
+# none, optional, require and optional_no_ca. Depth is a
+# number which specifies how deeply to verify the certificate
+# issuer chain before deciding the certificate is not valid.
+#SSLVerifyClient require
+#SSLVerifyDepth 10
+
+# Access Control:
+# With SSLRequire you can do per-directory access control based
+# on arbitrary complex boolean expressions containing server
+# variable checks and other lookup directives. The syntax is a
+# mixture between C and Perl. See the mod_ssl documentation
+# for more details.
+#<Location />
+#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
+# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
+# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
+# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
+# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
+# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
+#</Location>
+
+# SSL Engine Options:
+# Set various options for the SSL engine.
+# FakeBasicAuth:
+# Translate the client X.509 into a Basic Authorisation. This means that
+# the standard Auth/DBMAuth methods can be used for access control. The
+# user name is the `one line' version of the client's X.509 certificate.
+# Note that no password is obtained from the user. Every entry in the user
+# file needs this password: `xxj31ZMTZzkVA'.
+# ExportCertData:
+# This exports two additional environment variables: SSL_CLIENT_CERT and
+# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
+# server (always existing) and the client (only existing when client
+# authentication is used). This can be used to import the certificates
+# into CGI scripts.
+# CompatEnvVars:
+# This exports obsolete environment variables for backward compatibility
+# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
+# to provide compatibility to existing CGI scripts.
+#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars
+
+# Per-Server Logging:
+# The home of a custom SSL log file. Use this when you want a
+# compact non-error SSL logfile on a virtual host basis.
+CustomLog logs/ssl_request_log \
+ "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
+
+</VirtualHost>
+
+</IfDefine>
+
+# include additional things
+Include conf.d/*.conf
+Include vhosts.d/*.conf