From 4aff06cc2fecc0b59728d7fc825fb36394b847b7 Mon Sep 17 00:00:00 2001 From: Micah Date: Tue, 12 Jul 2016 16:45:58 -0400 Subject: git subrepo clone https://leap.se/git/puppet_apache puppet/modules/apache subrepo: subdir: "puppet/modules/apache" merged: "415e950" upstream: origin: "https://leap.se/git/puppet_apache" branch: "master" commit: "415e950" git-subrepo: version: "0.3.0" origin: "https://github.com/ingydotnet/git-subrepo" commit: "1e79595" Change-Id: Iba7353669969a09c0b4bbd63add67e3245b05ede --- .../apache/files/config/Debian.jessie/apache2.conf | 221 ++++ .../apache/files/config/Debian.wheezy/apache2.conf | 268 +++++ .../apache/files/config/Debian/apache2.conf | 230 ++++ .../modules/apache/files/config/OpenBSD/httpd.conf | 1120 ++++++++++++++++++++ 4 files changed, 1839 insertions(+) create mode 100644 puppet/modules/apache/files/config/Debian.jessie/apache2.conf create mode 100644 puppet/modules/apache/files/config/Debian.wheezy/apache2.conf create mode 100644 puppet/modules/apache/files/config/Debian/apache2.conf create mode 100644 puppet/modules/apache/files/config/OpenBSD/httpd.conf (limited to 'puppet/modules/apache/files/config') diff --git a/puppet/modules/apache/files/config/Debian.jessie/apache2.conf b/puppet/modules/apache/files/config/Debian.jessie/apache2.conf new file mode 100644 index 00000000..7b1f96f5 --- /dev/null +++ b/puppet/modules/apache/files/config/Debian.jessie/apache2.conf @@ -0,0 +1,221 @@ +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See http://httpd.apache.org/docs/2.4/ for detailed information about +# the directives and /usr/share/doc/apache2/README.Debian about Debian specific +# hints. +# +# +# Summary of how the Apache 2 configuration works in Debian: +# The Apache 2 web server configuration in Debian is quite different to +# upstream's suggested way to configure the web server. This is because Debian's +# default Apache2 installation attempts to make adding and removing modules, +# virtual hosts, and extra configuration directives as flexible as possible, in +# order to make automating the changes and administering the server as easy as +# possible. + +# It is split into several files forming the configuration hierarchy outlined +# below, all located in the /etc/apache2/ directory: +# +# /etc/apache2/ +# |-- apache2.conf +# | `-- ports.conf +# |-- mods-enabled +# | |-- *.load +# | `-- *.conf +# |-- conf-enabled +# | `-- *.conf +# `-- sites-enabled +# `-- *.conf +# +# +# * apache2.conf is the main configuration file (this file). It puts the pieces +# together by including all remaining configuration files when starting up the +# web server. +# +# * ports.conf is always included from the main configuration file. It is +# supposed to determine listening ports for incoming connections which can be +# customized anytime. +# +# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/ +# directories contain particular configuration snippets which manage modules, +# global configuration fragments, or virtual host configurations, +# respectively. +# +# They are activated by symlinking available configuration files from their +# respective *-available/ counterparts. These should be managed by using our +# helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See +# their respective man pages for detailed information. +# +# * The binary is called apache2. Due to the use of environment variables, in +# the default configuration, apache2 needs to be started/stopped with +# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not +# work with the default configuration. + + +# Global configuration +# + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# NOTE! If you intend to place this on an NFS (or otherwise network) +# mounted filesystem then please read the Mutex documentation (available +# at ); +# you will save yourself a lot of trouble. +# +# Do NOT add a slash at the end of the directory path. +# +#ServerRoot "/etc/apache2" + +# +# The accept serialization lock file MUST BE STORED ON A LOCAL DISK. +# +Mutex file:${APACHE_LOCK_DIR} default + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# This needs to be set in /etc/apache2/envvars +# +PidFile ${APACHE_PID_FILE} + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 5 + + +# These need to be set in /etc/apache2/envvars +User ${APACHE_RUN_USER} +Group ${APACHE_RUN_GROUP} + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a +# container, that host's errors will be logged there and not here. +# +ErrorLog ${APACHE_LOG_DIR}/error.log + +# +# LogLevel: Control the severity of messages logged to the error_log. +# Available values: trace8, ..., trace1, debug, info, notice, warn, +# error, crit, alert, emerg. +# It is also possible to configure the log level for particular modules, e.g. +# "LogLevel info ssl:warn" +# +LogLevel warn + +# Include module configuration: +IncludeOptional mods-enabled/*.load +IncludeOptional mods-enabled/*.conf + +# Include list of ports to listen on +Include ports.conf + + +# Sets the default security model of the Apache2 HTTPD server. It does +# not allow access to the root filesystem outside of /usr/share and /var/www. +# The former is used by web applications packaged in Debian, +# the latter may be used for local directories served by the web server. If +# your system is serving content from a sub-directory in /srv you must allow +# access here, or in any related virtual host. + + Options FollowSymLinks + AllowOverride None + Require all denied + + + + AllowOverride None + Require all granted + + + + Options Indexes FollowSymLinks + AllowOverride None + Require all granted + + +# +# Options Indexes FollowSymLinks +# AllowOverride None +# Require all granted +# + + + + +# AccessFileName: The name of the file to look for in each directory +# for additional configuration directives. See also the AllowOverride +# directive. +# +AccessFileName .htaccess + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# + + Require all denied + + + +# +# The following directives define some format nicknames for use with +# a CustomLog directive. +# +# These deviate from the Common Log Format definitions in that they use %O +# (the actual bytes sent including headers) instead of %b (the size of the +# requested file), because the latter makes it impossible to detect partial +# requests. +# +# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended. +# Use mod_remoteip instead. +# +LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined +LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined +LogFormat "%h %l %u %t \"%r\" %>s %O" common +LogFormat "%{Referer}i -> %U" referer +LogFormat "%{User-agent}i" agent + +# Include of directories ignores editors' and dpkg's backup files, +# see README.Debian for details. + +# Include generic snippets of statements +IncludeOptional conf-enabled/*.conf + +# Include the virtual host configurations: +IncludeOptional sites-enabled/*.conf + +# vim: syntax=apache ts=4 sw=4 sts=4 sr noet diff --git a/puppet/modules/apache/files/config/Debian.wheezy/apache2.conf b/puppet/modules/apache/files/config/Debian.wheezy/apache2.conf new file mode 100644 index 00000000..50545671 --- /dev/null +++ b/puppet/modules/apache/files/config/Debian.wheezy/apache2.conf @@ -0,0 +1,268 @@ +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See http://httpd.apache.org/docs/2.2/ for detailed information about +# the directives and /usr/share/doc/apache2-common/README.Debian.gz about +# Debian specific hints. +# +# +# Summary of how the Apache 2 configuration works in Debian: +# The Apache 2 web server configuration in Debian is quite different to +# upstream's suggested way to configure the web server. This is because Debian's +# default Apache2 installation attempts to make adding and removing modules, +# virtual hosts, and extra configuration directives as flexible as possible, in +# order to make automating the changes and administering the server as easy as +# possible. + +# It is split into several files forming the configuration hierarchy outlined +# below, all located in the /etc/apache2/ directory: +# +# /etc/apache2/ +# |-- apache2.conf +# | `-- ports.conf +# |-- mods-enabled +# | |-- *.load +# | `-- *.conf +# |-- conf.d +# | `-- * +# `-- sites-enabled +# `-- * +# +# +# * apache2.conf is the main configuration file (this file). It puts the pieces +# together by including all remaining configuration files when starting up the +# web server. +# +# In order to avoid conflicts with backup files, the Include directive is +# adapted to ignore files that: +# - do not begin with a letter or number +# - contain a character that is neither letter nor number nor _-:. +# - contain .dpkg +# +# Yet we strongly suggest that all configuration files either end with a +# .conf or .load suffix in the file name. The next Debian release will +# ignore files not ending with .conf (or .load for mods-enabled). +# +# * ports.conf is always included from the main configuration file. It is +# supposed to determine listening ports for incoming connections, and which +# of these ports are used for name based virtual hosts. +# +# * Configuration files in the mods-enabled/ and sites-enabled/ directories +# contain particular configuration snippets which manage modules or virtual +# host configurations, respectively. +# +# They are activated by symlinking available configuration files from their +# respective *-available/ counterparts. These should be managed by using our +# helpers a2enmod/a2dismod, a2ensite/a2dissite. See +# their respective man pages for detailed information. +# +# * Configuration files in the conf.d directory are either provided by other +# packages or may be added by the local administrator. Local additions +# should start with local- or end with .local.conf to avoid name clashes. All +# files in conf.d are considered (excluding the exceptions noted above) by +# the Apache 2 web server. +# +# * The binary is called apache2. Due to the use of environment variables, in +# the default configuration, apache2 needs to be started/stopped with +# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not +# work with the default configuration. + + +# Global configuration +# + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# NOTE! If you intend to place this on an NFS (or otherwise network) +# mounted filesystem then please read the LockFile documentation (available +# at ); +# you will save yourself a lot of trouble. +# +# Do NOT add a slash at the end of the directory path. +# +#ServerRoot "/etc/apache2" + +# +# The accept serialization lock file MUST BE STORED ON A LOCAL DISK. +# +LockFile ${APACHE_LOCK_DIR}/accept.lock + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# This needs to be set in /etc/apache2/envvars +# +PidFile ${APACHE_PID_FILE} + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 5 + +## +## Server-Pool Size Regulation (MPM specific) +## + +# prefork MPM +# StartServers: number of server processes to start +# MinSpareServers: minimum number of server processes which are kept spare +# MaxSpareServers: maximum number of server processes which are kept spare +# MaxClients: maximum number of server processes allowed to start +# MaxRequestsPerChild: maximum number of requests a server process serves + + StartServers 5 + MinSpareServers 5 + MaxSpareServers 10 + MaxClients 150 + MaxRequestsPerChild 0 + + +# worker MPM +# StartServers: initial number of server processes to start +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a +# graceful restart. ThreadLimit can only be changed by stopping +# and starting Apache. +# ThreadsPerChild: constant number of worker threads in each server process +# MaxClients: maximum number of simultaneous client connections +# MaxRequestsPerChild: maximum number of requests a server process serves + + StartServers 2 + MinSpareThreads 25 + MaxSpareThreads 75 + ThreadLimit 64 + ThreadsPerChild 25 + MaxClients 150 + MaxRequestsPerChild 0 + + +# event MPM +# StartServers: initial number of server processes to start +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# ThreadsPerChild: constant number of worker threads in each server process +# MaxClients: maximum number of simultaneous client connections +# MaxRequestsPerChild: maximum number of requests a server process serves + + StartServers 2 + MinSpareThreads 25 + MaxSpareThreads 75 + ThreadLimit 64 + ThreadsPerChild 25 + MaxClients 150 + MaxRequestsPerChild 0 + + +# These need to be set in /etc/apache2/envvars +User ${APACHE_RUN_USER} +Group ${APACHE_RUN_GROUP} + +# +# AccessFileName: The name of the file to look for in each directory +# for additional configuration directives. See also the AllowOverride +# directive. +# + +AccessFileName .htaccess + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# + + Order allow,deny + Deny from all + Satisfy all + + +# +# DefaultType is the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +# It is also possible to omit any default MIME type and let the +# client's browser guess an appropriate action instead. Typically the +# browser will decide based on the file's extension then. In cases +# where no good assumption can be made, letting the default MIME type +# unset is suggested instead of forcing the browser to accept +# incorrect metadata. +# +DefaultType None + + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a +# container, that host's errors will be logged there and not here. +# +ErrorLog ${APACHE_LOG_DIR}/error.log + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +# Include module configuration: +Include mods-enabled/*.load +Include mods-enabled/*.conf + +# Include list of ports to listen on and which to use for name based vhosts +Include ports.conf + +# +# The following directives define some format nicknames for use with +# a CustomLog directive (see below). +# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i +# +LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined +LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined +LogFormat "%h %l %u %t \"%r\" %>s %O" common +LogFormat "%{Referer}i -> %U" referer +LogFormat "%{User-agent}i" agent + +# Include of directories ignores editors' and dpkg's backup files, +# see the comments above for details. + +# Include generic snippets of statements +Include conf.d/ + +# Include the virtual host configurations: +Include sites-enabled/ diff --git a/puppet/modules/apache/files/config/Debian/apache2.conf b/puppet/modules/apache/files/config/Debian/apache2.conf new file mode 100644 index 00000000..1e97b4eb --- /dev/null +++ b/puppet/modules/apache/files/config/Debian/apache2.conf @@ -0,0 +1,230 @@ +# +# Based upon the NCSA server configuration files originally by Rob McCool. +# +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See http://httpd.apache.org/docs/2.2/ for detailed information about +# the directives. +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# The configuration directives are grouped into three basic sections: +# 1. Directives that control the operation of the Apache server process as a +# whole (the 'global environment'). +# 2. Directives that define the parameters of the 'main' or 'default' server, +# which responds to requests that aren't handled by a virtual host. +# These directives also provide default values for the settings +# of all virtual hosts. +# 3. Settings for virtual hosts, which allow Web requests to be sent to +# different IP addresses or hostnames and have them handled by the +# same Apache server process. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so "foo.log" +# with ServerRoot set to "/etc/apache2" will be interpreted by the +# server as "/etc/apache2/foo.log". +# + +### Section 1: Global Environment +# +# The directives in this section affect the overall operation of Apache, +# such as the number of concurrent requests it can handle or where it +# can find its configuration files. +# + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# NOTE! If you intend to place this on an NFS (or otherwise network) +# mounted filesystem then please read the LockFile documentation (available +# at ); +# you will save yourself a lot of trouble. +# +# Do NOT add a slash at the end of the directory path. +# +#ServerRoot "/etc/apache2" + +# +# The accept serialization lock file MUST BE STORED ON A LOCAL DISK. +# +LockFile ${APACHE_LOCK_DIR}/accept.lock + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# This needs to be set in /etc/apache2/envvars +# +PidFile ${APACHE_PID_FILE} + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 15 + +## +## Server-Pool Size Regulation (MPM specific) +## + +# prefork MPM +# StartServers: number of server processes to start +# MinSpareServers: minimum number of server processes which are kept spare +# MaxSpareServers: maximum number of server processes which are kept spare +# MaxClients: maximum number of server processes allowed to start +# MaxRequestsPerChild: maximum number of requests a server process serves + + StartServers 5 + MinSpareServers 5 + MaxSpareServers 10 + MaxClients 150 + MaxRequestsPerChild 0 + + +# worker MPM +# StartServers: initial number of server processes to start +# MaxClients: maximum number of simultaneous client connections +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a +# graceful restart. ThreadLimit can only be changed by stopping +# and starting Apache. +# ThreadsPerChild: constant number of worker threads in each server process +# MaxRequestsPerChild: maximum number of requests a server process serves + + StartServers 2 + MinSpareThreads 25 + MaxSpareThreads 75 + ThreadLimit 64 + ThreadsPerChild 25 + MaxClients 150 + MaxRequestsPerChild 0 + + +# event MPM +# StartServers: initial number of server processes to start +# MaxClients: maximum number of simultaneous client connections +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# ThreadsPerChild: constant number of worker threads in each server process +# MaxRequestsPerChild: maximum number of requests a server process serves + + StartServers 2 + MaxClients 150 + MinSpareThreads 25 + MaxSpareThreads 75 + ThreadLimit 64 + ThreadsPerChild 25 + MaxRequestsPerChild 0 + + +# These need to be set in /etc/apache2/envvars +User ${APACHE_RUN_USER} +Group ${APACHE_RUN_GROUP} + +# +# AccessFileName: The name of the file to look for in each directory +# for additional configuration directives. See also the AllowOverride +# directive. +# + +AccessFileName .htaccess + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# + + Order allow,deny + Deny from all + Satisfy all + + +# +# DefaultType is the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +DefaultType text/plain + + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a +# container, that host's errors will be logged there and not here. +# +ErrorLog ${APACHE_LOG_DIR}/error.log + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +# Include module configuration: +Include mods-enabled/*.load +Include mods-enabled/*.conf + +# Include all the user configurations: +Include httpd.conf + +# Include ports listing +Include ports.conf + +# +# The following directives define some format nicknames for use with +# a CustomLog directive (see below). +# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i +# +LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined +LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined +LogFormat "%h %l %u %t \"%r\" %>s %O" common +LogFormat "%{Referer}i -> %U" referer +LogFormat "%{User-agent}i" agent + +# Include of directories ignores editors' and dpkg's backup files, +# see README.Debian for details. + +# Include generic snippets of statements +Include conf.d/ + +# Include the virtual host configurations: +Include sites-enabled/ diff --git a/puppet/modules/apache/files/config/OpenBSD/httpd.conf b/puppet/modules/apache/files/config/OpenBSD/httpd.conf new file mode 100644 index 00000000..09e452e6 --- /dev/null +++ b/puppet/modules/apache/files/config/OpenBSD/httpd.conf @@ -0,0 +1,1120 @@ +# $OpenBSD: httpd.conf,v 1.22 2008/01/25 09:59:57 sthen Exp $ +# +# Based upon the NCSA server configuration files originally by Rob McCool. +# +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See for detailed information about +# the directives. +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# After this file is processed, the server will look for and process +# /var/www/conf/srm.conf and then /var/www/conf/access.conf +# unless you have overridden these with ResourceConfig and/or +# AccessConfig directives here. +# +# The configuration directives are grouped into three basic sections: +# 1. Directives that control the operation of the Apache server process as a +# whole (the 'global environment'). +# 2. Directives that define the parameters of the 'main' or 'default' server, +# which responds to requests that aren't handled by a virtual host. +# These directives also provide default values for the settings +# of all virtual hosts. +# 3. Settings for virtual hosts, which allow Web requests to be sent to +# different IP addresses or hostnames and have them handled by the +# same Apache server process. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so "logs/foo.log" +# with ServerRoot set to "/usr/local/apache" will be interpreted by the +# server as "/usr/local/apache/logs/foo.log". +# + +### Section 1: Global Environment +# +# The directives in this section affect the overall operation of Apache, +# such as the number of concurrent requests it can handle or where it +# can find its configuration files. +# + +# +# ServerType is either inetd, or standalone. Inetd mode is only supported on +# Unix platforms. +# +ServerType standalone + +# +# ServerTokens is either Full, OS, Minimal, or ProductOnly. +# The values define what version information is returned in the +# Server header in HTTP responses. +# +# ServerTokens ProductOnly + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# NOTE! If you intend to place this on an NFS (or otherwise network) +# mounted filesystem then please read the LockFile documentation +# (available at ); +# you will save yourself a lot of trouble. +# +# Do NOT add a slash at the end of the directory path. +# +ServerRoot "/var/www" + +# +# The LockFile directive sets the path to the lockfile used when Apache +# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or +# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at +# its default value. The main reason for changing it is if the logs +# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL +# DISK. The PID of the main server process is automatically appended to +# the filename. +# +#LockFile logs/accept.lock + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# +PidFile logs/httpd.pid +# +# ScoreBoardFile: File used to store internal server process information. +# Not all architectures require this. But if yours does (you'll know because +# this file will be created when you run Apache) then you *must* ensure that +# no two invocations of Apache share the same scoreboard file. +# +ScoreBoardFile logs/apache_runtime_status + +# +# In the standard configuration, the server will process httpd.conf, +# srm.conf, and access.conf in that order. The latter two files are +# now deprecated and not installed any more, as it is recommended that +# all directives be kept in a single file for simplicity. +# +#ResourceConfig conf/srm.conf +#AccessConfig conf/access.conf + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 15 + +# +# Server-pool size regulation. Rather than making you guess how many +# server processes you need, Apache dynamically adapts to the load it +# sees --- that is, it tries to maintain enough server processes to +# handle the current load, plus a few spare servers to handle transient +# load spikes (e.g., multiple simultaneous requests from a single +# Netscape browser). +# +# It does this by periodically checking how many servers are waiting +# for a request. If there are fewer than MinSpareServers, it creates +# a new spare. If there are more than MaxSpareServers, some of the +# spares die off. The default values in httpd.conf-dist are probably OK +# for most sites. +# +MinSpareServers 5 +MaxSpareServers 10 + +# +# Number of servers to start initially --- should be a reasonable ballpark +# figure. +# +StartServers 5 + +# +# Limit on total number of servers running, i.e., limit on the number +# of clients who can simultaneously connect --- if this limit is ever +# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. +# It is intended mainly as a brake to keep a runaway server from taking +# the system with it as it spirals down... +# +MaxClients 150 + +# +# MaxRequestsPerChild: the number of requests each child process is +# allowed to process before the child dies. The child will exit so +# as to avoid problems after prolonged use when Apache (and maybe the +# libraries it uses) leak memory or other resources. On most systems, this +# isn't really needed, but a few (such as Solaris) do have notable leaks +# in the libraries. +# +MaxRequestsPerChild 0 + +# +# MaxFOOPerChild: these directives set the current and hard rlimits for +# the child processes. Attempts to exceed them will cause the the OS to +# take appropriate action. See the setrlimit(2) and signal(3). +# +MaxCPUPerChild 0 +MaxDATAPerChild 0 +MaxNOFILEPerChild 0 +MaxRSSPerChild 0 +MaxSTACKPerChild 0 + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, in addition to the default. See also the +# directive. +# +#Listen 3000 +#Listen 12.34.56.78:80 + +# +# BindAddress: You can support virtual hosts with this option. This directive +# is used to tell the server which IP address to listen to. It can either +# contain "*", an IP address, or a fully qualified Internet domain name. +# See also the and Listen directives. +# +#BindAddress * + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Please read the file README.DSO in the Apache 1.3 distribution for more +# details about the DSO mechanism and run `httpd -l' for the list of already +# built-in (statically linked and thus always available) modules in your httpd +# binary. +# +# Note: The order is which modules are loaded is important. Don't change +# the order below without expert advice. +# +# Example: +# LoadModule foo_module libexec/mod_foo.so + +# "anonymous" user access to authenticated areas +# LoadModule anon_auth_module /usr/lib/apache/modules/mod_auth_anon.so + +# user authentication using Berkeley DB files +# LoadModule db_auth_module /usr/lib/apache/modules/mod_auth_db.so + +# user authentication using DBM files +# LoadModule dbm_auth_module /usr/lib/apache/modules/mod_auth_dbm.so + +# authentication using new-style MD5 Digest Authentication (experimental) +# LoadModule digest_auth_module /usr/lib/apache/modules/mod_auth_digest.so + +# CERN httpd metafile semantics +# LoadModule cern_meta_module /usr/lib/apache/modules/mod_cern_meta.so + +# configuration defines ($xxx) +# LoadModule define_module /usr/lib/apache/modules/mod_define.so + +# user authentication using old-style MD5 Digest Authentication +# LoadModule digest_module /usr/lib/apache/modules/mod_digest.so + +# generation of Expires HTTP headers according to user-specified criteria +# LoadModule expires_module /usr/lib/apache/modules/mod_expires.so + +# customization of HTTP response headers +# LoadModule headers_module /usr/lib/apache/modules/mod_headers.so + +# comprehensive overview of the server configuration +# LoadModule info_module /usr/lib/apache/modules/mod_info.so + +# logging of the client user agents (deprecated in favor of mod_log_config) +# LoadModule agent_log_module /usr/lib/apache/modules/mod_log_agent.so + +# logging of referers (deprecated in favor of mod_log_config) +# LoadModule referer_log_module /usr/lib/apache/modules/mod_log_referer.so + +# determining the MIME type of a file by looking at a few bytes of its contents +# LoadModule mime_magic_module /usr/lib/apache/modules/mod_mime_magic.so + +# mmap()ing of a statically configured list of frequently requested but +# not changed files (experimental) +# LoadModule mmap_static_module /usr/lib/apache/modules/mod_mmap_static.so + +# rule-based rewriting engine to rewrite requested URLs on the fly +# LoadModule rewrite_module /usr/lib/apache/modules/mod_rewrite.so + +# attempt to correct misspellings of URLs that users might have entered +# LoadModule speling_module /usr/lib/apache/modules/mod_speling.so + +# provides an environment variable with a unique identifier for each request +# LoadModule unique_id_module /usr/lib/apache/modules/mod_unique_id.so + +# uses cookies to provide for a clickstream log of user activity on a site +# LoadModule usertrack_module /usr/lib/apache/modules/mod_usertrack.so + +# dynamically configured mass virtual hosting +# LoadModule vhost_alias_module /usr/lib/apache/modules/mod_vhost_alias.so + +# caching proxy +# LoadModule proxy_module /usr/lib/apache/modules/libproxy.so + +# +# Include extra module configuration files +# +Include /var/www/conf/modules/*.conf + +# +# ExtendedStatus controls whether Apache will generate "full" status +# information (ExtendedStatus On) or just basic information (ExtendedStatus +# Off) when the "server-status" handler is called. The default is Off. +# +#ExtendedStatus On + +### Section 2: 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# definition. These values also provide defaults for +# any containers you may define later in the file. +# +# All of these directives may appear inside containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + +# +# If your ServerType directive (set earlier in the 'Global Environment' +# section) is set to "inetd", the next few directives don't have any +# effect since their settings are defined by the inetd configuration. +# Skip ahead to the ServerAdmin directive. +# + +# +# Port: The port to which the standalone server listens. For +# ports < 1023, you will need httpd to be run as root initially. +# +Port 80 + +## +## SSL Support +## +## When we also provide SSL we have to listen to the +## standard HTTP port (see above) and to the HTTPS port +## + +Listen 80 +Listen 443 + + +# +# If you wish httpd to run as a different user or group, you must run +# httpd as root initially and it will switch. +# +# User/Group: The name (or #number) of the user/group to run httpd as. +# . On SCO (ODT 3) use "User nouser" and "Group nogroup". +# . On HPUX you may not be able to use shared memory as nobody, and the +# suggested workaround is to create a user www and use that user. +# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) +# when the value of (unsigned)Group is above 60000; +# don't use Group #-1 on these systems! +# On OpenBSD, use user www, group www. +# +User www +Group www + +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. +# +ServerAdmin you@your.address + +# +# ServerName allows you to set a host name which is sent back to clients for +# your server if it's different than the one the program would get (i.e., use +# "www" instead of the host's real name). +# +# Note: You cannot just invent host names and hope they work. The name you +# define here must be a valid DNS name for your host. If you don't understand +# this, ask your network administrator. +# If your host doesn't have a registered DNS name, enter its IP address here. +# You will have to access it by its address (e.g., http://123.45.67.89/) +# anyway, and this will make redirections work in a sensible way. +# +#ServerName new.host.name + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "/var/www/htdocs" + +# +# Each directory to which Apache has access, can be configured with respect +# to which services and features are allowed and/or disabled in that +# directory (and its subdirectories). +# +# First, we configure the "default" to be a very restrictive set of +# permissions. +# + + Options FollowSymLinks + AllowOverride None + + +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# + +# +# This should be changed to whatever you set DocumentRoot to. +# + + +# +# This may also be "None", "All", or any combination of "Indexes", +# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". +# +# Note that "MultiViews" must be named *explicitly* --- "Options All" +# doesn't give it to you. +# + Options Indexes FollowSymLinks + +# +# This controls which options the .htaccess files in directories can +# override. Can also be "All", or any combination of "Options", "FileInfo", +# "AuthConfig", and "Limit" +# + AllowOverride None + +# +# Controls who can get stuff from this server. +# + Order allow,deny + Allow from all + + +# +# UserDir: The directory which is prepended onto a users username, within +# which a users's web pages are looked for if a ~user request is received. +# Relative pathes are relative to the user's home directory. +# +# "disabled" turns this feature off. +# +# Since httpd will chroot(2) to the ServerRoot path by default, +# you should use +# UserDir /var/www/users +# and create per user directories in /var/www/users/ +# + +UserDir disabled + +# +# Control access to UserDir directories. The following is an example +# for a site where these directories are restricted to read-only and +# are located under /users/ +# You will need to change this to match your site's home directories. +# +# +# AllowOverride FileInfo AuthConfig Limit +# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec +# +# Order allow,deny +# Allow from all +# +# +# Order deny,allow +# Deny from all +# +# + +# +# DirectoryIndex: Name of the file or files to use as a pre-written HTML +# directory index. Separate multiple entries with spaces. +# +DirectoryIndex index.html + +# +# AccessFileName: The name of the file to look for in each directory +# for access control information. +# +AccessFileName .htaccess + +# +# The following lines prevent .htaccess files from being viewed by +# Web clients. Since .htaccess files often contain authorization +# information, access is disallowed for security reasons. Comment +# these lines out if you want Web visitors to see the contents of +# .htaccess files. If you change the AccessFileName directive above, +# be sure to make the corresponding changes here. +# + + Order allow,deny + Deny from all + + +# +# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each +# document that was negotiated on the basis of content. This asks proxy +# servers not to cache the document. Uncommenting the following line disables +# this behavior, and proxies will be allowed to cache the documents. +# +#CacheNegotiatedDocs + +# +# UseCanonicalName: (new for 1.3) With this setting turned on, whenever +# Apache needs to construct a self-referencing URL (a URL that refers back +# to the server the response is coming from) it will use ServerName and +# Port to form a "canonical" name. With this setting off, Apache will +# use the hostname:port that the client supplied, when possible. This +# also affects SERVER_NAME and SERVER_PORT in CGI scripts. +# +UseCanonicalName On + +# +# TypesConfig describes where the mime.types file (or equivalent) is +# to be found. +# +TypesConfig conf/mime.types + +# +# DefaultType is the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +DefaultType text/plain + +# +# The mod_mime_magic module allows the server to use various hints from the +# contents of the file itself to determine its type. The MIMEMagicFile +# directive tells the module where the hint definitions are located. +# mod_mime_magic is not part of the default server (you have to add +# it yourself with a LoadModule [see the DSO paragraph in the 'Global +# Environment' section], or recompile the server and include mod_mime_magic +# as part of the configuration), so it's enclosed in an container. +# This means that the MIMEMagicFile directive will only be processed if the +# module is part of the server. +# + + MIMEMagicFile conf/magic + + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a +# container, that host's errors will be logged there and not here. +# Either a filename or the text "syslog:" followed by a facility +# name may be specified here. +# +#ErrorLog syslog:daemon +ErrorLog logs/error_log + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +# +# The following directives define some format nicknames for use with +# a CustomLog directive (see below). +# +LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined +LogFormat "%h %l %u %t \"%r\" %>s %b" common +LogFormat "%{Referer}i -> %U" referer +LogFormat "%{User-agent}i" agent + +# +# The location and format of the access logfile (Common Logfile Format). +# If you do not define any access logfiles within a +# container, they will be logged here. Contrariwise, if you *do* +# define per- access logfiles, transactions will be +# logged therein and *not* in this file. +# +CustomLog logs/access_log common + +# +# If you would like to have agent and referer logfiles, uncomment the +# following directives. +# +#CustomLog logs/referer_log referer +#CustomLog logs/agent_log agent + +# +# If you prefer a single logfile with access, agent, and referer information +# (Combined Logfile Format) you can use the following directive. +# +#CustomLog logs/access_log combined + +# +# Optionally add a line containing the server version and virtual host +# name to server-generated pages (error documents, FTP directory listings, +# mod_status and mod_info output etc., but not CGI generated documents). +# Set to "EMail" to also include a mailto: link to the ServerAdmin. +# Set to one of: On | Off | EMail +# +# ServerSignature Off + +# +# Aliases: Add here as many aliases as you need (with no limit). The format is +# Alias fakename realname +# +# Note that if you include a trailing / on fakename then the server will +# require it to be present in the URL. So "/icons" isn't aliased in this +# example, only "/icons/".. +# +Alias /icons/ "/var/www/icons/" + + + Options Indexes MultiViews + AllowOverride None + Order allow,deny + Allow from all + + + + Options MultiViews + AllowOverride None + Order allow,deny + Allow from all + + +# +# ScriptAlias: This controls which directories contain server scripts. +# ScriptAliases are essentially the same as Aliases, except that +# documents in the realname directory are treated as applications and +# run by the server when requested rather than as documents sent to the client. +# The same rules about trailing "/" apply to ScriptAlias directives as to +# Alias. +# +ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" + +# +# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased +# CGI directory exists, if you have that configured. +# + + AllowOverride None + Options None + Order allow,deny + Allow from all + + +# +# Redirect allows you to tell clients about documents which used to exist in +# your server's namespace, but do not anymore. This allows you to tell the +# clients where to look for the relocated document. +# Format: Redirect old-URI new-URL +# + +# +# Directives controlling the display of server-generated directory listings. +# + +# +# FancyIndexing is whether you want fancy directory indexing or standard +# +IndexOptions FancyIndexing + +# +# AddIcon* directives tell the server which icon to show for different +# files or filename extensions. These are only displayed for +# FancyIndexed directories. +# +AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip + +AddIconByType (TXT,/icons/text.gif) text/* +AddIconByType (IMG,/icons/image2.gif) image/* +AddIconByType (SND,/icons/sound2.gif) audio/* +AddIconByType (VID,/icons/movie.gif) video/* + +AddIcon /icons/binary.gif .bin .exe +AddIcon /icons/binhex.gif .hqx +AddIcon /icons/tar.gif .tar +AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv +AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip +AddIcon /icons/a.gif .ps .ai .eps +AddIcon /icons/layout.gif .html .shtml .htm .pdf +AddIcon /icons/text.gif .txt +AddIcon /icons/c.gif .c +AddIcon /icons/p.gif .pl .py +AddIcon /icons/f.gif .for +AddIcon /icons/dvi.gif .dvi +AddIcon /icons/uuencoded.gif .uu +AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl +AddIcon /icons/tex.gif .tex +AddIcon /icons/bomb.gif core + +AddIcon /icons/back.gif .. +AddIcon /icons/hand.right.gif README +AddIcon /icons/folder.gif ^^DIRECTORY^^ +AddIcon /icons/blank.gif ^^BLANKICON^^ + +# +# DefaultIcon is which icon to show for files which do not have an icon +# explicitly set. +# +DefaultIcon /icons/unknown.gif + +# +# AddDescription allows you to place a short description after a file in +# server-generated indexes. These are only displayed for FancyIndexed +# directories. +# Format: AddDescription "description" filename +# +#AddDescription "GZIP compressed document" .gz +#AddDescription "tar archive" .tar +#AddDescription "GZIP compressed tar archive" .tgz + +# +# ReadmeName is the name of the README file the server will look for by +# default, and append to directory listings. +# +# HeaderName is the name of a file which should be prepended to +# directory indexes. +# +# The server will first look for name.html and include it if found. +# If name.html doesn't exist, the server will then look for name.txt +# and include it as plaintext if found. +# +ReadmeName README +HeaderName HEADER + +# +# IndexIgnore is a set of filenames which directory indexing should ignore +# and not include in the listing. Shell-style wildcarding is permitted. +# +IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t + +# +# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress +# information on the fly. Note: Not all browsers support this. +# Despite the name similarity, the following Add* directives have nothing +# to do with the FancyIndexing customization directives above. +# +AddEncoding x-compress Z +AddEncoding x-gzip gz + +# +# AddLanguage allows you to specify the language of a document. You can +# then use content negotiation to give a browser a file in a language +# it can understand. Note that the suffix does not have to be the same +# as the language keyword --- those with documents in Polish (whose +# net-standard language code is pl) may wish to use "AddLanguage pl .po" +# to avoid the ambiguity with the common suffix for perl scripts. +# +AddLanguage en .en +AddLanguage fr .fr +AddLanguage de .de +AddLanguage da .da +AddLanguage el .el +AddLanguage it .it + +# +# LanguagePriority allows you to give precedence to some languages +# in case of a tie during content negotiation. +# Just list the languages in decreasing order of preference. +# +LanguagePriority en fr de + +# +# AddType allows you to tweak mime.types without actually editing it, or to +# make certain files to be certain types. +# +# For example, the PHP module (not part of the Apache distribution) +# will typically use: +# +#AddType application/x-httpd-php .php + +# +# AddHandler allows you to map certain file extensions to "handlers", +# actions unrelated to filetype. These can be either built into the server +# or added with the Action command (see below) +# +# If you want to use server side includes, or CGI outside +# ScriptAliased directories, uncomment the following lines. +# +# To use CGI scripts: +# +#AddHandler cgi-script .cgi + +# +# To use server-parsed HTML files +# +#AddType text/html .shtml +#AddHandler server-parsed .shtml + +# +# Uncomment the following line to enable Apache's send-asis HTTP file +# feature +# +#AddHandler send-as-is asis + +# +# If you wish to use server-parsed imagemap files, use +# +#AddHandler imap-file map + +# +# To enable type maps, you might want to use +# +#AddHandler type-map var + +# +# Action lets you define media types that will execute a script whenever +# a matching file is called. This eliminates the need for repeated URL +# pathnames for oft-used CGI file processors. +# Format: Action media/type /cgi-script/location +# Format: Action handler-name /cgi-script/location +# + +# +# MetaDir: specifies the name of the directory in which Apache can find +# meta information files. These files contain additional HTTP headers +# to include when sending the document +# +#MetaDir .web + +# +# MetaSuffix: specifies the file name suffix for the file containing the +# meta information. +# +#MetaSuffix .meta + +# +# Customizable error response (Apache style) +# these come in three flavors +# +# 1) plain text +#ErrorDocument 500 "The server made a boo boo. +# n.b. the (") marks it as text, it does not get output +# +# 2) local redirects +#ErrorDocument 404 /missing.html +# to redirect to local URL /missing.html +#ErrorDocument 404 /cgi-bin/missing_handler.pl +# N.B.: You can redirect to a script or a document using server-side-includes. +# +# 3) external redirects +#ErrorDocument 402 http://some.other_server.com/subscription_info.html +# N.B.: Many of the environment variables associated with the original +# request will *not* be available to such a script. + +# +# The following directives modify normal HTTP response behavior. +# The first directive disables keepalive for Netscape 2.x and browsers that +# spoof it. There are known problems with these browser implementations. +# The second directive is for Microsoft Internet Explorer 4.0b2 +# which has a broken HTTP/1.1 implementation and does not properly +# support keepalive when it is used on 301 or 302 (redirect) responses. +# +BrowserMatch "Mozilla/2" nokeepalive +BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 + +# +# The following directive disables HTTP/1.1 responses to browsers which +# are in violation of the HTTP/1.0 spec by not being able to grok a +# basic 1.1 response. +# +BrowserMatch "RealPlayer 4\.0" force-response-1.0 +BrowserMatch "Java/1\.0" force-response-1.0 +BrowserMatch "JDK/1\.0" force-response-1.0 + +# +# Allow server status reports, with the URL of http://servername/server-status +# Change the ".your_domain.com" to match your domain to enable. +# +# +# SetHandler server-status +# Order deny,allow +# Deny from all +# Allow from .your_domain.com +# + +# +# Allow remote server configuration reports, with the URL of +# http://servername/server-info (requires that mod_info.c be loaded). +# Change the ".your_domain.com" to match your domain to enable. +# +# +# SetHandler server-info +# Order deny,allow +# Deny from all +# Allow from .your_domain.com +# + +# +# There have been reports of people trying to abuse an old bug from pre-1.1 +# days. This bug involved a CGI script distributed as a part of Apache. +# By uncommenting these lines you can redirect these attacks to a logging +# script on phf.apache.org. Or, you can record them yourself, using the script +# support/phf_abuse_log.cgi. +# +# +# Deny from all +# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi +# + +# +# Proxy Server directives. Uncomment the following lines to +# enable the proxy server: +# +# +#ProxyRequests On +# +# +# Order deny,allow +# Deny from all +# Allow from .your_domain.com +# + +# +# Enable/disable the handling of HTTP/1.1 "Via:" headers. +# ("Full" adds the server version; "Block" removes all outgoing Via: headers) +# Set to one of: Off | On | Full | Block +# +#ProxyVia On + +# +# To enable the cache as well, edit and uncomment the following lines: +# (no cacheing without CacheRoot) +# +#CacheRoot "/var/www/proxy" +#CacheSize 5 +#CacheGcInterval 4 +#CacheMaxExpire 24 +#CacheLastModifiedFactor 0.1 +#CacheDefaultExpire 1 +#NoCache a_domain.com another_domain.edu joes.garage_sale.com + +# +# End of proxy directives. + +### Section 3: Virtual Hosts +# +# VirtualHost: If you want to maintain multiple domains/hostnames on your +# machine you can setup VirtualHost containers for them. +# Please see the documentation at +# for further details before you try to setup virtual hosts. +# You may use the command line option '-S' to verify your virtual host +# configuration. + +# +# If you want to use name-based virtual hosts you need to define at +# least one IP address (and port number) for them. +# +#NameVirtualHost 12.34.56.78:80 +#NameVirtualHost 12.34.56.78 + +# +# VirtualHost example: +# Almost any Apache directive may go into a VirtualHost container. +# +# +# ServerAdmin webmaster@host.some_domain.com +# DocumentRoot /www/docs/host.some_domain.com +# ServerName host.some_domain.com +# ErrorLog logs/host.some_domain.com-error_log +# CustomLog logs/host.some_domain.com-access_log common +# + +# +# + + +## +## SSL Global Context +## +## All SSL configuration in this context applies both to +## the main server and all SSL-enabled virtual hosts. +## + +# +# Some MIME-types for downloading Certificates and CRLs +# + +AddType application/x-x509-ca-cert .crt +AddType application/x-pkcs7-crl .crl + + + + +# Pass Phrase Dialog: +# Configure the pass phrase gathering process. +# The filtering dialog program (`builtin' is a internal +# terminal dialog) has to provide the pass phrase on stdout. +SSLPassPhraseDialog builtin + +# Inter-Process Session Cache: +# Configure the SSL Session Cache: First either `none' +# or `dbm:/path/to/file' for the mechanism to use and +# second the expiring timeout (in seconds). +SSLSessionCache dbm:logs/ssl_scache +SSLSessionCacheTimeout 300 + +# Semaphore: +# Configure the path to the mutual exclusion semaphore the +# SSL engine uses internally for inter-process synchronization. +SSLMutex sem + +# Pseudo Random Number Generator (PRNG): +# Configure one or more sources to seed the PRNG of the +# SSL library. The seed data should be of good random quality. +SSLRandomSeed startup builtin +SSLRandomSeed connect builtin +#SSLRandomSeed startup file:/dev/random 512 +#SSLRandomSeed startup file:/dev/urandom 512 +#SSLRandomSeed connect file:/dev/random 512 +#SSLRandomSeed connect file:/dev/urandom 512 +SSLRandomSeed startup file:/dev/arandom 512 + +# Logging: +# The home of the dedicated SSL protocol logfile. Errors are +# additionally duplicated in the general error log file. Put +# this somewhere where it cannot be used for symlink attacks on +# a real server (i.e. somewhere where only root can write). +# Log levels are (ascending order: higher ones include lower ones): +# none, error, warn, info, trace, debug. +SSLLog logs/ssl_engine_log +SSLLogLevel info + + + + + +## +## SSL Virtual Host Context +## + + + +# General setup for the virtual host +DocumentRoot /var/www/htdocs +ServerName new.host.name +ServerAdmin you@your.address +ErrorLog logs/error_log +TransferLog logs/access_log + +# SSL Engine Switch: +# Enable/Disable SSL for this virtual host. +SSLEngine on + +# SSL Cipher Suite: +# List the ciphers that the client is permitted to negotiate. +# See the mod_ssl documentation for a complete list. +#SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP + +# Server Certificate: +# Point SSLCertificateFile at a PEM encoded certificate. If +# the certificate is encrypted, then you will be prompted for a +# pass phrase. Note that a kill -HUP will prompt again. A test +# certificate can be generated with `make certificate' under +# built time. +SSLCertificateFile /etc/ssl/server.crt + +# Server Private Key: +# If the key is not combined with the certificate, use this +# directive to point at the key file. +SSLCertificateKeyFile /etc/ssl/private/server.key + +# Certificate Authority (CA): +# Set the CA certificate verification path where to find CA +# certificates for client authentication or alternatively one +# huge file containing all of them (file must be PEM encoded) +# Note: Inside SSLCACertificatePath you need hash symlinks +# to point to the certificate files. Use the provided +# Makefile to update the hash symlinks after changes. +#SSLCACertificatePath /var/www/conf/ssl.crt +#SSLCACertificateFile /var/www/conf/ssl.crt/ca-bundle.crt + +# Client Authentication (Type): +# Client certificate verification type and depth. Types are +# none, optional, require and optional_no_ca. Depth is a +# number which specifies how deeply to verify the certificate +# issuer chain before deciding the certificate is not valid. +#SSLVerifyClient require +#SSLVerifyDepth 10 + +# Access Control: +# With SSLRequire you can do per-directory access control based +# on arbitrary complex boolean expressions containing server +# variable checks and other lookup directives. The syntax is a +# mixture between C and Perl. See the mod_ssl documentation +# for more details. +# +#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \ +# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ +# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ +# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ +# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ +# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ +# + +# SSL Engine Options: +# Set various options for the SSL engine. +# FakeBasicAuth: +# Translate the client X.509 into a Basic Authorisation. This means that +# the standard Auth/DBMAuth methods can be used for access control. The +# user name is the `one line' version of the client's X.509 certificate. +# Note that no password is obtained from the user. Every entry in the user +# file needs this password: `xxj31ZMTZzkVA'. +# ExportCertData: +# This exports two additional environment variables: SSL_CLIENT_CERT and +# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the +# server (always existing) and the client (only existing when client +# authentication is used). This can be used to import the certificates +# into CGI scripts. +# CompatEnvVars: +# This exports obsolete environment variables for backward compatibility +# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this +# to provide compatibility to existing CGI scripts. +#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars + +# Per-Server Logging: +# The home of a custom SSL log file. Use this when you want a +# compact non-error SSL logfile on a virtual host basis. +CustomLog logs/ssl_request_log \ + "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" + + + + + +# include additional things +Include conf.d/*.conf +Include vhosts.d/*.conf -- cgit v1.2.3