First time a fd was successfully transfered over a socket :)

8 files changed, 254 insertions, 88 deletions

diff --git a/openvpn/doc/openvpn.8 b/openvpn/doc/openvpn.8
index ee46de6..24b1a2c 100644
--- a/openvpn/doc/openvpn.8
+++ b/openvpn/doc/openvpn.8
@@ -612,12 +612,21 @@ option.
 .\"*********************************************************
 .TP
 .B \-\-ipchange cmd
-Execute shell command
+Run command
 .B cmd
 when our remote ip-address is initially authenticated or
 changes.
 
-Execute as:
+.B cmd
+consists of a path to script (or executable program), optionally
+followed by arguments. The path and arguments may be single- or double-quoted
+and/or escaped using a backslash, and should be separated by one or more spaces.
+
+When
+.B cmd
+is executed two arguments are appended after any arguments specified in
+.B cmd
+, as follows:
 
 .B cmd ip_address port_number
 
@@ -632,14 +641,6 @@ script instead.
 See the "Environmental Variables" section below for
 additional parameters passed as environmental variables.
 
-Note that
-.B cmd
-can be a shell command with multiple arguments, in which
-case all OpenVPN-generated arguments will be appended
-to
-.B cmd
-to build a command line which will be passed to the script.
-
 If you are running in a dynamic IP address environment where
 the IP addresses of either peer could change without notice,
 you can use this script, for example, to edit the
@@ -1047,17 +1048,32 @@ for the TAP-Win32 adapter to come up before adding routes.
 .\"*********************************************************
 .TP
 .B \-\-route-up cmd
-Execute shell command
+Run command
 .B cmd
 after routes are added, subject to
 .B \-\-route-delay.
 
+.B cmd
+consists of a path to script (or executable program), optionally
+followed by arguments. The path and arguments may be single- or double-quoted
+and/or escaped using a backslash, and should be separated by one or more spaces.
+
 See the "Environmental Variables" section below for
 additional parameters passed as environmental variables.
+.\"*********************************************************
+.TP
+.B \-\-route-pre-down cmd
+Run command
+.B cmd
+before routes are removed upon disconnection.
 
-Note that
 .B cmd
-can be a shell command with multiple arguments.
+consists of a path to script (or executable program), optionally
+followed by arguments. The path and arguments may be single- or double-quoted
+and/or escaped using a backslash, and should be separated by one or more spaces.
+
+See the "Environmental Variables" section below for
+additional parameters passed as environmental variables.
 .\"*********************************************************
 .TP
 .B \-\-route-noexec
@@ -1691,10 +1707,19 @@ memory available to other applications.
 .\"*********************************************************
 .TP
 .B \-\-up cmd
-Shell command to run after successful TUN/TAP device open
+Run command
+.B cmd
+after successful TUN/TAP device open
 (pre
 .B \-\-user
-UID change).  The up script is useful for specifying route
+UID change).
+
+.B cmd
+consists of a path to script (or executable program), optionally
+followed by arguments. The path and arguments may be single- or double-quoted
+and/or escaped using a backslash, and should be separated by one or more spaces.
+
+The up command is useful for specifying route
 commands which route IP traffic destined for
 private subnets which exist at the other
 end of the VPN connection into the tunnel.
@@ -1714,13 +1739,11 @@ execute as:
 See the "Environmental Variables" section below for
 additional parameters passed as environmental variables.
 
-Note that
-.B cmd
-can be a shell command with multiple arguments, in which
-case all OpenVPN-generated arguments will be appended
-to
+Note that if
 .B cmd
-to build a command line which will be passed to the shell.
+includes arguments, all OpenVPN-generated arguments will be appended
+to them to build an argument list with which the executable will be
+called.
 
 Typically,
 .B cmd
@@ -1796,12 +1819,20 @@ i.e. the receipt of the first authenticated packet from the peer.
 .\"*********************************************************
 .TP
 .B \-\-down cmd
-Shell command to run after TUN/TAP device close
+Run command
+.B cmd
+after TUN/TAP device close
 (post
 .B \-\-user
 UID change and/or
 .B \-\-chroot
-).  Called with the same parameters and environmental
+).
+.B cmd
+consists of a path to script (or executable program), optionally
+followed by arguments. The path and arguments may be single- or double-quoted
+and/or escaped using a backslash, and should be separated by one or more spaces.
+
+Called with the same parameters and environmental
 variables as the
 .B \-\-up
 option above.
@@ -2029,7 +2060,7 @@ options.
 Become a daemon after all initialization functions are completed.
 This option will cause all message and error output to
 be sent to the syslog file (such as /var/log/messages),
-except for the output of shell scripts and
+except for the output of scripts and
 ifconfig commands,
 which will go to /dev/null unless otherwise redirected.
 The syslog redirection occurs immediately at the point
@@ -2949,20 +2980,29 @@ In the absence of this option, OpenVPN will disconnect a client instance
 upon connection of a new client having the same common name.
 .\"*********************************************************
 .TP
-.B \-\-client-connect script
+.B \-\-client-connect cmd
 Run
-.B script
-on client connection.  The script is passed the common name
+.B command cmd
+on client connection.
+
+.B cmd
+consists of a path to script (or executable program), optionally
+followed by arguments. The path and arguments may be single- or double-quoted
+and/or escaped using a backslash, and should be separated by one or more spaces.
+
+The command is passed the common name
 and IP address of the just-authenticated client
 as environmental variables (see environmental variable section
-below).  The script is also passed
-the pathname of a freshly created temporary file as $1
-(i.e. the first command line argument), to be used by the script
+below).  The command is also passed
+the pathname of a freshly created temporary file as the last argument
+(after any arguments specified in
+.B cmd
+), to be used by the command
 to pass dynamically generated config file directives back to OpenVPN.
 
 If the script wants to generate a dynamic config file
 to be applied on the server when the client connects,
-it should write it to the file named by $1.
+it should write it to the file named by the last argument.
 
 See the
 .B \-\-client-config-dir
@@ -2977,7 +3017,7 @@ returns a non-zero error status, it will cause the client
 to be disconnected.
 .\"*********************************************************
 .TP
-.B \-\-client-disconnect
+.B \-\-client-disconnect cmd
 Like
 .B \-\-client-connect
 but called on client instance shutdown.  Will not be called
@@ -2989,11 +3029,19 @@ successful (0) status returns.
 
 The exception to this rule is if the
 .B \-\-client-disconnect
-script or plugins are cascaded, and at least one client-connect
+command or plugins are cascaded, and at least one client-connect
 function succeeded, then ALL of the client-disconnect functions for
 scripts and plugins will be called on client instance object deletion,
 even in cases where some of the related client-connect functions returned
 an error status.
+
+The
+.B \-\-client-disconnect
+command is passed the same pathname as the corresponding
+.B \-\-client-connect
+command as its last argument. (after any arguments specified in
+.B cmd
+).
 .B 
 .\"*********************************************************
 .TP
@@ -3176,12 +3224,18 @@ and
 .\"*********************************************************
 .TP
 .B \-\-learn-address cmd
-Run script or shell command
+Run command
 .B cmd
 to validate client virtual addresses or routes.
 
 .B cmd
-will be executed with 3 parameters:
+consists of a path to script (or executable program), optionally
+followed by arguments. The path and arguments may be single- or double-quoted
+and/or escaped using a backslash, and should be separated by one or more spaces.
+
+Three arguments will be appended to any arguments in
+.B cmd
+as follows:
 
 .B [1] operation \-\-
 "add", "update", or "delete" based on whether or not
@@ -3215,15 +3269,20 @@ policies with regard to the client's high-level common name,
 rather than the low level client virtual addresses.
 .\"*********************************************************
 .TP
-.B \-\-auth-user-pass-verify script method
+.B \-\-auth-user-pass-verify cmd method
 Require the client to provide a username/password (possibly
 in addition to a client certificate) for authentication.
 
-OpenVPN will execute
-.B script
-as a shell command to validate the username/password
+OpenVPN will run
+.B command cmd
+to validate the username/password
 provided by the client.
 
+.B cmd
+consists of a path to script (or executable program), optionally
+followed by arguments. The path and arguments may be single- or double-quoted
+and/or escaped using a backslash, and should be separated by one or more spaces.
+
 If
 .B method
 is set to "via-env", OpenVPN will call
@@ -4451,7 +4510,7 @@ username/password.  It is always cached.
 .\"*********************************************************
 .TP
 .B \-\-tls-verify cmd
-Execute shell command
+Run command
 .B cmd
 to verify the X509 name of a
 pending TLS connection that has otherwise passed all other
@@ -4464,16 +4523,16 @@ test).
 .B cmd
 should return 0 to allow the TLS handshake to proceed, or 1 to fail.
 
-Note that
 .B cmd
-is a command line and as such may (if enclosed in quotes) contain
-whitespace separated arguments.  The first word of
-.B cmd
-is the shell command to execute and the remaining words are its
-arguments.
+consists of a path to script (or executable program), optionally
+followed by arguments. The path and arguments may be single- or double-quoted
+and/or escaped using a backslash, and should be separated by one or more spaces.
+
 When
 .B cmd
-is executed two arguments are appended, as follows:
+is executed two arguments are appended after any arguments specified in
+.B cmd
+, as follows:
 
 .B cmd certificate_depth subject
 
@@ -6145,7 +6204,7 @@ access any machine on the 10.0.1.0/24 subnet
 over the secure tunnel (or vice versa).
 
 In a production environment, you could put the route command(s)
-in a shell script and execute with the
+in a script and execute with the
 .B \-\-up
 option.
 .\"*********************************************************
diff --git a/openvpn/src/openvpn/manage.c b/openvpn/src/openvpn/manage.c
index 1dddd41..b980755 100644
--- a/openvpn/src/openvpn/manage.c
+++ b/openvpn/src/openvpn/manage.c
@@ -66,6 +66,8 @@ struct management *management; /* GLOBAL */
 /* static forward declarations */
 static void man_output_standalone (struct management *man, volatile int *signal_received);
 static void man_reset_client_socket (struct management *man, const bool exiting);
+static ssize_t write_fd (int fd, void *ptr, size_t nbytes, int flags, int sendfd);
+
 
 static void
 man_help ()
@@ -1891,7 +1893,13 @@ man_write (struct management *man)
   if (buf && BLEN (buf))
     {
       const int len = min_int (size_hint, BLEN (buf));
-      sent = send (man->connection.sd_cli, BPTR (buf), len, MSG_NOSIGNAL);
+#ifdef TARGET_ANDROID
+        if (man->connection.fdtosend > 0) {
+            sent = write_fd (man->connection.sd_cli, BPTR (buf), len, MSG_NOSIGNAL,man->connection.fdtosend);
+            man->connection.fdtosend = -1;
+        } else
+#endif
+        sent = send (man->connection.sd_cli, BPTR (buf), len, MSG_NOSIGNAL);
       if (sent >= 0)
 	{
 	  buffer_list_advance (man->connection.out, sent);
@@ -3084,6 +3092,39 @@ management_query_rsa_sig (struct management *man,
 
 #endif
 
+static ssize_t write_fd (int fd, void *ptr, size_t nbytes, int flags, int sendfd)
+{
+    struct msghdr msg;
+    struct iovec iov[1];
+    
+    union {
+        struct cmsghdr cm;
+        char    control[CMSG_SPACE(sizeof(int))];
+    } control_un;
+    struct cmsghdr *cmptr;
+    
+    msg.msg_control = control_un.control;
+    msg.msg_controllen = sizeof(control_un.control);
+    
+    cmptr = CMSG_FIRSTHDR(&msg);
+    cmptr->cmsg_len = CMSG_LEN(sizeof(int));
+    cmptr->cmsg_level = SOL_SOCKET;
+    cmptr->cmsg_type = SCM_RIGHTS;
+    *((int *) CMSG_DATA(cmptr)) = sendfd;
+    
+    msg.msg_name = NULL;
+    msg.msg_namelen = 0;
+    
+    iov[0].iov_base = ptr;
+    iov[0].iov_len = nbytes;
+    msg.msg_iov = iov;
+    msg.msg_iovlen = 1;
+    
+    return (sendmsg(fd, &msg, flags));
+}
+
+
+
 /*
  * Return true if management_hold() would block
  */
diff --git a/openvpn/src/openvpn/manage.h b/openvpn/src/openvpn/manage.h
index f681f8d..71e1a84 100644
--- a/openvpn/src/openvpn/manage.h
+++ b/openvpn/src/openvpn/manage.h
@@ -208,7 +208,7 @@ struct man_persist {
   bool hold_release;
 
   const char *special_state_msg;
-
+    
   counter_type bytes_in;
   counter_type bytes_out;
 };
@@ -303,6 +303,10 @@ struct man_connection {
 #ifdef MANAGMENT_EXTERNAL_KEY
   struct buffer_list *rsa_sig;
 #endif
+#ifdef TARGET_ANDROID
+    int fdtosend;
+#endif
+    
 };
 
 struct management
diff --git a/openvpn/src/openvpn/openvpn_win32_resources.rc b/openvpn/src/openvpn/openvpn_win32_resources.rc
index e1cd959..d092e21 100644
--- a/openvpn/src/openvpn/openvpn_win32_resources.rc
+++ b/openvpn/src/openvpn/openvpn_win32_resources.rc
@@ -5,6 +5,8 @@
 #endif
 #include <winresrc.h>
 
+#pragma code_page(65001) /* UTF8 */
+
 LANGUAGE LANG_NEUTRAL, SUBLANG_NEUTRAL
 
 VS_VERSION_INFO VERSIONINFO
@@ -28,7 +30,7 @@ BEGIN
             VALUE "FileDescription", "OpenVPN Daemon"
             VALUE "FileVersion", PACKAGE_VERSION ".0"
             VALUE "InternalName", "OpenVPN"
-            VALUE "LegalCopyright", "Copyright © The OpenVPN Project" 
+            VALUE "LegalCopyright", "Copyright © The OpenVPN Project" 
             VALUE "OriginalFilename", "openvpn.exe"
             VALUE "ProductName", "OpenVPN"
             VALUE "ProductVersion", PACKAGE_VERSION ".0"
diff --git a/openvpn/src/openvpn/options.c b/openvpn/src/openvpn/options.c
index 525c00c..a2d0f6e 100644
--- a/openvpn/src/openvpn/options.c
+++ b/openvpn/src/openvpn/options.c
@@ -166,7 +166,7 @@ static const char usage_message[] =
   "                  Set n=\"infinite\" to retry indefinitely.\n"
   "--float         : Allow remote to change its IP address/port, such as through\n"
   "                  DHCP (this is the default if --remote is not used).\n"
-  "--ipchange cmd  : Execute shell command cmd on remote ip address initial\n"
+  "--ipchange cmd  : Run command cmd on remote ip address initial\n"
   "                  setting or change -- execute as: cmd ip-address port#\n"
   "--port port     : TCP/UDP port # for both local and remote.\n"
   "--lport port    : TCP/UDP port # for local (default=%d). Implies --bind.\n"
@@ -223,8 +223,8 @@ static const char usage_message[] =
   "                  adding routes (may be 0).  If not specified, routes will\n"
   "                  be added immediately after tun/tap open.  On Windows, wait\n"
   "                  up to w seconds for TUN/TAP adapter to come up.\n"
-  "--route-up cmd  : Execute shell cmd after routes are added.\n"
-  "--route-pre-down cmd  : Execute shell cmd before routes are removed.\n"
+  "--route-up cmd  : Run command cmd after routes are added.\n"
+  "--route-pre-down cmd : Run command cmd before routes are removed.\n"
   "--route-noexec  : Don't add routes automatically.  Instead pass routes to\n"
   "                  --route-up script using environmental variables.\n"
   "--route-nopull  : When used with --client or --pull, accept options pushed\n"
@@ -311,17 +311,17 @@ static const char usage_message[] =
 #endif
   "--mlock         : Disable Paging -- ensures key material and tunnel\n"
   "                  data will never be written to disk.\n"
-  "--up cmd        : Shell cmd to execute after successful tun device open.\n"
+  "--up cmd        : Run command cmd after successful tun device open.\n"
   "                  Execute as: cmd tun/tap-dev tun-mtu link-mtu \\\n"
   "                              ifconfig-local-ip ifconfig-remote-ip\n"
   "                  (pre --user or --group UID/GID change)\n"
   "--up-delay      : Delay tun/tap open and possible --up script execution\n"
   "                  until after TCP/UDP connection establishment with peer.\n"
-  "--down cmd      : Shell cmd to run after tun device close.\n"
+  "--down cmd      : Run command cmd after tun device close.\n"
   "                  (post --user/--group UID/GID change and/or --chroot)\n"
-  "                  (script parameters are same as --up option)\n"
-  "--down-pre      : Call --down cmd/script before TUN/TAP close.\n"
-  "--up-restart    : Run up/down scripts for all restarts including those\n"
+  "                  (command parameters are same as --up option)\n"
+  "--down-pre      : Run --down command before TUN/TAP close.\n"
+  "--up-restart    : Run up/down commands for all restarts including those\n"
   "                  caused by --ping-restart or SIGUSR1\n"
   "--user user     : Set UID to user after initialization.\n"
   "--group group   : Set GID to group after initialization.\n"
@@ -452,7 +452,7 @@ static const char usage_message[] =
   "                  the authenticated username as the common name,\n"
   "                  rather than the common name from the client cert.\n"
   "--auth-user-pass-verify cmd method: Query client for username/password and\n"
-  "                  run script cmd to verify.  If method='via-env', pass\n"
+  "                  run command cmd to verify.  If method='via-env', pass\n"
   "                  user/pass via environment, if method='via-file', pass\n"
   "                  user/pass via temporary file.\n"
   "--opt-verify    : Clients that connect with options that are incompatible\n"
@@ -464,8 +464,8 @@ static const char usage_message[] =
   "--client-to-client : Internally route client-to-client traffic.\n"
   "--duplicate-cn  : Allow multiple clients with the same common name to\n"
   "                  concurrently connect.\n"
-  "--client-connect cmd : Run script cmd on client connection.\n"
-  "--client-disconnect cmd : Run script cmd on client disconnection.\n"
+  "--client-connect cmd : Run command cmd on client connection.\n"
+  "--client-disconnect cmd : Run command cmd on client disconnection.\n"
   "--client-config-dir dir : Directory for custom client config files.\n"
   "--ccd-exclusive : Refuse connection unless custom client config is found.\n"
   "--tmp-dir dir   : Temporary directory, used for --client-connect return file and plugin communication.\n"
@@ -475,7 +475,7 @@ static const char usage_message[] =
   "--tcp-queue-limit n : Maximum number of queued TCP output packets.\n"
   "--tcp-nodelay   : Macro that sets TCP_NODELAY socket flag on the server\n"
   "                  as well as pushes it to connecting clients.\n"
-  "--learn-address cmd : Run script cmd to validate client virtual addresses.\n"
+  "--learn-address cmd : Run command cmd to validate client virtual addresses.\n"
   "--connect-freq n s : Allow a maximum of n new connections per s seconds.\n"
   "--max-clients n : Allow a maximum of n simultaneously connected clients.\n"
   "--max-routes-per-client n : Allow a maximum of n internal routes per client.\n"
@@ -609,7 +609,7 @@ static const char usage_message[] =
   "--askpass [file]: Get PEM password from controlling tty before we daemonize.\n"
   "--auth-nocache  : Don't cache --askpass or --auth-user-pass passwords.\n"
   "--crl-verify crl ['dir']: Check peer certificate against a CRL.\n"
-  "--tls-verify cmd: Execute shell command cmd to verify the X509 name of a\n"
+  "--tls-verify cmd: Run command cmd to verify the X509 name of a\n"
   "                  pending TLS connection that has otherwise passed all other\n"
   "                  tests of certification.  cmd should return 0 to allow\n"
   "                  TLS handshake to proceed, or 1 to fail.  (cmd is\n"
@@ -2676,6 +2676,55 @@ check_file_access(const int type, const char *file, const int mode, const char *
 }
 
 /*
+ * Verifies that the path in the "command" that comes after certain script options (e.g., --up) is a
+ * valid file with appropriate permissions.
+ *
+ * "command" consists of a path, optionally followed by a space, which may be
+ * followed by arbitrary arguments. It is NOT a full shell command line -- shell expansion is not
+ * performed.
+ *
+ * The path and arguments in "command" may be single- or double-quoted or escaped.
+ *
+ * The path is extracted from "command", then check_file_access() is called to check it. The
+ * arguments, if any, are ignored.
+ *
+ * Note that the type, mode, and opt arguments to this routine are the same as the corresponding
+ * check_file_access() arguments.
+ */
+static bool
+check_cmd_access(const char *command, const char *opt)
+{
+  struct argv argv;
+  bool return_code;
+
+  /* If no command was set, there are no errors to look for */
+  if (! command)
+      return false;
+
+  /* Extract executable path and arguments */
+  argv = argv_new ();
+  argv_printf (&argv, "%sc", command);
+
+  /* if an executable is specified then check it; otherwise, complain */
+  if (argv.argv[0])
+    /* Scripts requires R_OK as well, but that might fail on binaries which
+     * only requires X_OK to function on Unix - a scenario not unlikely to
+     * be seen on suid binaries.
+     */
+    return_code = check_file_access(CHKACC_FILE, argv.argv[0], X_OK, opt);
+  else
+    {
+      msg (M_NOPREFIX|M_OPTERR, "%s fails with '%s': No path to executable.",
+           opt, command);
+      return_code = true;
+    }
+
+  argv_reset (&argv);
+
+  return return_code;
+}
+
+/*
  * Sanity check of all file/dir options.  Checks that file/dir
  * is accessible by OpenVPN
  */
@@ -2751,27 +2800,29 @@ options_postprocess_filechecks (struct options *options)
 #if P2MP_SERVER
   errs |= check_file_access (CHKACC_FILE, options->client_config_dir,
                              R_OK|X_OK, "--client-config-dir");
-  /* ** Script hooks ** */
-  errs |= check_file_access (CHKACC_FILE, options->client_connect_script,
-                             R_OK|X_OK, "--client-connect script");
-  errs |= check_file_access (CHKACC_FILE, options->client_disconnect_script,
-                             R_OK|X_OK, "--client-disconnect script");
-  errs |= check_file_access (CHKACC_FILE, options->auth_user_pass_verify_script,
-                             R_OK|X_OK, "--auth-user-pass-verify script");
-  errs |= check_file_access (CHKACC_FILE, options->tls_verify,
-                             R_OK|X_OK, "--tls-verify script");
-  errs |= check_file_access (CHKACC_FILE, options->up_script,
-                             R_OK|X_OK, "--up script");
-  errs |= check_file_access (CHKACC_FILE, options->down_script,
-                             R_OK|X_OK, "--down script");
-  errs |= check_file_access (CHKACC_FILE, options->ipchange,
-                             R_OK|X_OK, "--ipchange script");
-  errs |= check_file_access (CHKACC_FILE, options->route_script,
-                             R_OK|X_OK, "--route-up script");
-  errs |= check_file_access (CHKACC_FILE, options->route_predown_script,
-                             R_OK|X_OK, "--route-pre-down script");
-  errs |= check_file_access (CHKACC_FILE, options->learn_address_script,
-                             R_OK|X_OK, "--learn-address script");
+
+  /* ** Script hooks that accept an optionally quoted and/or escaped executable path, ** */
+  /* ** optionally followed by arguments ** */
+  errs |= check_cmd_access (options->auth_user_pass_verify_script,
+                            "--auth-user-pass-verify script");
+  errs |= check_cmd_access (options->client_connect_script,
+                            "--client-connect script");
+  errs |= check_cmd_access (options->client_disconnect_script,
+                            "--client-disconnect script");
+  errs |= check_cmd_access (options->tls_verify,
+                            "--tls-verify script");
+  errs |= check_cmd_access (options->up_script,
+                            "--up script");
+  errs |= check_cmd_access (options->down_script,
+                            "--down script");
+  errs |= check_cmd_access (options->ipchange,
+                            "--ipchange script");
+  errs |= check_cmd_access (options->route_script,
+                            "--route-up script");
+  errs |= check_cmd_access (options->route_predown_script,
+                            "--route-pre-down script");
+  errs |= check_cmd_access (options->learn_address_script,
+                            "--learn-address script");
 #endif /* P2MP_SERVER */
 
   if (errs)
diff --git a/openvpn/src/openvpn/socket.c b/openvpn/src/openvpn/socket.c
index 364b97e..e794c11 100644
--- a/openvpn/src/openvpn/socket.c
+++ b/openvpn/src/openvpn/socket.c
@@ -38,6 +38,8 @@
 #include "ps.h"
 #include "manage.h"
 #include "misc.h"
+#include "manage.h"
+
 
 #include "memdbg.h"
 
@@ -984,6 +986,11 @@ create_socket (struct link_socket *sock)
     {
       ASSERT (0);
     }
+#ifdef TARGET_ANDROID
+    management->connection.fdtosend = sock->sd;
+    management_auth_token (management,"'PROTECT-FD'");
+#endif
+    
 }
 
 /*
@@ -1341,7 +1348,7 @@ socket_connect (socket_descriptor_t *sd,
 }
 
 /* For stream protocols, allocate a buffer to build up packet.
-   Called after frame has been finalized. */
+    Called after frame has been finalized. */
 
 static void
 socket_frame_init (const struct frame *frame, struct link_socket *sock)
diff --git a/openvpn/src/openvpnserv/openvpnserv_resources.rc b/openvpn/src/openvpnserv/openvpnserv_resources.rc
index 9b79cb7..7980193 100644
--- a/openvpn/src/openvpnserv/openvpnserv_resources.rc
+++ b/openvpn/src/openvpnserv/openvpnserv_resources.rc
@@ -5,6 +5,8 @@
 #endif
 #include <winresrc.h>
 
+#pragma code_page(65001) /* UTF8 */
+
 LANGUAGE LANG_NEUTRAL, SUBLANG_NEUTRAL
 
 VS_VERSION_INFO VERSIONINFO
@@ -28,7 +30,7 @@ BEGIN
             VALUE "FileDescription", "OpenVPN Service"
             VALUE "FileVersion", PACKAGE_VERSION ".0"
             VALUE "InternalName", "OpenVPN"
-            VALUE "LegalCopyright", "Copyright © The OpenVPN Project" 
+            VALUE "LegalCopyright", "Copyright © The OpenVPN Project" 
             VALUE "OriginalFilename", "openvpnserv.exe"
             VALUE "ProductName", "OpenVPN"
             VALUE "ProductVersion", PACKAGE_VERSION ".0"
diff --git a/openvpn/version.m4 b/openvpn/version.m4
index 2bd1401..1ea1c32 100644
--- a/openvpn/version.m4
+++ b/openvpn/version.m4
@@ -1,7 +1,7 @@
 dnl define the OpenVPN version
 define([PRODUCT_NAME], [OpenVPN])
 define([PRODUCT_TARNAME], [openvpn])
-define([PRODUCT_VERSION], [2.3_alpha1])
+define([PRODUCT_VERSION], [2.3_master])
 define([PRODUCT_BUGREPORT], [openvpn-users@lists.sourceforge.net])
 define([PRODUCT_VERSION_RESOURCE], [2,3,0,0])
 dnl define the TAP version