summaryrefslogtreecommitdiff
path: root/main/openvpn/sample/sample-config-files/server.conf
diff options
context:
space:
mode:
Diffstat (limited to 'main/openvpn/sample/sample-config-files/server.conf')
m---------main/openvpn0
-rw-r--r--main/openvpn/sample/sample-config-files/server.conf304
2 files changed, 0 insertions, 304 deletions
diff --git a/main/openvpn b/main/openvpn
new file mode 160000
+Subproject 7aaf01766f9718375986600216607aeb6397200
diff --git a/main/openvpn/sample/sample-config-files/server.conf b/main/openvpn/sample/sample-config-files/server.conf
deleted file mode 100644
index c85ca0ff..00000000
--- a/main/openvpn/sample/sample-config-files/server.conf
+++ /dev/null
@@ -1,304 +0,0 @@
-#################################################
-# Sample OpenVPN 2.0 config file for #
-# multi-client server. #
-# #
-# This file is for the server side #
-# of a many-clients <-> one-server #
-# OpenVPN configuration. #
-# #
-# OpenVPN also supports #
-# single-machine <-> single-machine #
-# configurations (See the Examples page #
-# on the web site for more info). #
-# #
-# This config should work on Windows #
-# or Linux/BSD systems. Remember on #
-# Windows to quote pathnames and use #
-# double backslashes, e.g.: #
-# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
-# #
-# Comments are preceded with '#' or ';' #
-#################################################
-
-# Which local IP address should OpenVPN
-# listen on? (optional)
-;local a.b.c.d
-
-# Which TCP/UDP port should OpenVPN listen on?
-# If you want to run multiple OpenVPN instances
-# on the same machine, use a different port
-# number for each one. You will need to
-# open up this port on your firewall.
-port 1194
-
-# TCP or UDP server?
-;proto tcp
-proto udp
-
-# "dev tun" will create a routed IP tunnel,
-# "dev tap" will create an ethernet tunnel.
-# Use "dev tap0" if you are ethernet bridging
-# and have precreated a tap0 virtual interface
-# and bridged it with your ethernet interface.
-# If you want to control access policies
-# over the VPN, you must create firewall
-# rules for the the TUN/TAP interface.
-# On non-Windows systems, you can give
-# an explicit unit number, such as tun0.
-# On Windows, use "dev-node" for this.
-# On most systems, the VPN will not function
-# unless you partially or fully disable
-# the firewall for the TUN/TAP interface.
-;dev tap
-dev tun
-
-# Windows needs the TAP-Win32 adapter name
-# from the Network Connections panel if you
-# have more than one. On XP SP2 or higher,
-# you may need to selectively disable the
-# Windows firewall for the TAP adapter.
-# Non-Windows systems usually don't need this.
-;dev-node MyTap
-
-# SSL/TLS root certificate (ca), certificate
-# (cert), and private key (key). Each client
-# and the server must have their own cert and
-# key file. The server and all clients will
-# use the same ca file.
-#
-# See the "easy-rsa" directory for a series
-# of scripts for generating RSA certificates
-# and private keys. Remember to use
-# a unique Common Name for the server
-# and each of the client certificates.
-#
-# Any X509 key management system can be used.
-# OpenVPN can also use a PKCS #12 formatted key file
-# (see "pkcs12" directive in man page).
-ca ca.crt
-cert server.crt
-key server.key # This file should be kept secret
-
-# Diffie hellman parameters.
-# Generate your own with:
-# openssl dhparam -out dh2048.pem 2048
-dh dh2048.pem
-
-# Network topology
-# Should be subnet (addressing via IP)
-# unless Windows clients v2.0.9 and lower have to
-# be supported (then net30, i.e. a /30 per client)
-# Defaults to net30 (not recommended)
-;topology subnet
-
-# Configure server mode and supply a VPN subnet
-# for OpenVPN to draw client addresses from.
-# The server will take 10.8.0.1 for itself,
-# the rest will be made available to clients.
-# Each client will be able to reach the server
-# on 10.8.0.1. Comment this line out if you are
-# ethernet bridging. See the man page for more info.
-server 10.8.0.0 255.255.255.0
-
-# Maintain a record of client <-> virtual IP address
-# associations in this file. If OpenVPN goes down or
-# is restarted, reconnecting clients can be assigned
-# the same virtual IP address from the pool that was
-# previously assigned.
-ifconfig-pool-persist ipp.txt
-
-# Configure server mode for ethernet bridging.
-# You must first use your OS's bridging capability
-# to bridge the TAP interface with the ethernet
-# NIC interface. Then you must manually set the
-# IP/netmask on the bridge interface, here we
-# assume 10.8.0.4/255.255.255.0. Finally we
-# must set aside an IP range in this subnet
-# (start=10.8.0.50 end=10.8.0.100) to allocate
-# to connecting clients. Leave this line commented
-# out unless you are ethernet bridging.
-;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
-
-# Configure server mode for ethernet bridging
-# using a DHCP-proxy, where clients talk
-# to the OpenVPN server-side DHCP server
-# to receive their IP address allocation
-# and DNS server addresses. You must first use
-# your OS's bridging capability to bridge the TAP
-# interface with the ethernet NIC interface.
-# Note: this mode only works on clients (such as
-# Windows), where the client-side TAP adapter is
-# bound to a DHCP client.
-;server-bridge
-
-# Push routes to the client to allow it
-# to reach other private subnets behind
-# the server. Remember that these
-# private subnets will also need
-# to know to route the OpenVPN client
-# address pool (10.8.0.0/255.255.255.0)
-# back to the OpenVPN server.
-;push "route 192.168.10.0 255.255.255.0"
-;push "route 192.168.20.0 255.255.255.0"
-
-# To assign specific IP addresses to specific
-# clients or if a connecting client has a private
-# subnet behind it that should also have VPN access,
-# use the subdirectory "ccd" for client-specific
-# configuration files (see man page for more info).
-
-# EXAMPLE: Suppose the client
-# having the certificate common name "Thelonious"
-# also has a small subnet behind his connecting
-# machine, such as 192.168.40.128/255.255.255.248.
-# First, uncomment out these lines:
-;client-config-dir ccd
-;route 192.168.40.128 255.255.255.248
-# Then create a file ccd/Thelonious with this line:
-# iroute 192.168.40.128 255.255.255.248
-# This will allow Thelonious' private subnet to
-# access the VPN. This example will only work
-# if you are routing, not bridging, i.e. you are
-# using "dev tun" and "server" directives.
-
-# EXAMPLE: Suppose you want to give
-# Thelonious a fixed VPN IP address of 10.9.0.1.
-# First uncomment out these lines:
-;client-config-dir ccd
-;route 10.9.0.0 255.255.255.252
-# Then add this line to ccd/Thelonious:
-# ifconfig-push 10.9.0.1 10.9.0.2
-
-# Suppose that you want to enable different
-# firewall access policies for different groups
-# of clients. There are two methods:
-# (1) Run multiple OpenVPN daemons, one for each
-# group, and firewall the TUN/TAP interface
-# for each group/daemon appropriately.
-# (2) (Advanced) Create a script to dynamically
-# modify the firewall in response to access
-# from different clients. See man
-# page for more info on learn-address script.
-;learn-address ./script
-
-# If enabled, this directive will configure
-# all clients to redirect their default
-# network gateway through the VPN, causing
-# all IP traffic such as web browsing and
-# and DNS lookups to go through the VPN
-# (The OpenVPN server machine may need to NAT
-# or bridge the TUN/TAP interface to the internet
-# in order for this to work properly).
-;push "redirect-gateway def1 bypass-dhcp"
-
-# Certain Windows-specific network settings
-# can be pushed to clients, such as DNS
-# or WINS server addresses. CAVEAT:
-# http://openvpn.net/faq.html#dhcpcaveats
-# The addresses below refer to the public
-# DNS servers provided by opendns.com.
-;push "dhcp-option DNS 208.67.222.222"
-;push "dhcp-option DNS 208.67.220.220"
-
-# Uncomment this directive to allow different
-# clients to be able to "see" each other.
-# By default, clients will only see the server.
-# To force clients to only see the server, you
-# will also need to appropriately firewall the
-# server's TUN/TAP interface.
-;client-to-client
-
-# Uncomment this directive if multiple clients
-# might connect with the same certificate/key
-# files or common names. This is recommended
-# only for testing purposes. For production use,
-# each client should have its own certificate/key
-# pair.
-#
-# IF YOU HAVE NOT GENERATED INDIVIDUAL
-# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
-# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
-# UNCOMMENT THIS LINE OUT.
-;duplicate-cn
-
-# The keepalive directive causes ping-like
-# messages to be sent back and forth over
-# the link so that each side knows when
-# the other side has gone down.
-# Ping every 10 seconds, assume that remote
-# peer is down if no ping received during
-# a 120 second time period.
-keepalive 10 120
-
-# For extra security beyond that provided
-# by SSL/TLS, create an "HMAC firewall"
-# to help block DoS attacks and UDP port flooding.
-#
-# Generate with:
-# openvpn --genkey --secret ta.key
-#
-# The server and each client must have
-# a copy of this key.
-# The second parameter should be '0'
-# on the server and '1' on the clients.
-tls-auth ta.key 0 # This file is secret
-
-# Select a cryptographic cipher.
-# This config item must be copied to
-# the client config file as well.
-;cipher BF-CBC # Blowfish (default)
-;cipher AES-128-CBC # AES
-;cipher DES-EDE3-CBC # Triple-DES
-
-# Enable compression on the VPN link.
-# If you enable it here, you must also
-# enable it in the client config file.
-comp-lzo
-
-# The maximum number of concurrently connected
-# clients we want to allow.
-;max-clients 100
-
-# It's a good idea to reduce the OpenVPN
-# daemon's privileges after initialization.
-#
-# You can uncomment this out on
-# non-Windows systems.
-;user nobody
-;group nobody
-
-# The persist options will try to avoid
-# accessing certain resources on restart
-# that may no longer be accessible because
-# of the privilege downgrade.
-persist-key
-persist-tun
-
-# Output a short status file showing
-# current connections, truncated
-# and rewritten every minute.
-status openvpn-status.log
-
-# By default, log messages will go to the syslog (or
-# on Windows, if running as a service, they will go to
-# the "\Program Files\OpenVPN\log" directory).
-# Use log or log-append to override this default.
-# "log" will truncate the log file on OpenVPN startup,
-# while "log-append" will append to it. Use one
-# or the other (but not both).
-;log openvpn.log
-;log-append openvpn.log
-
-# Set the appropriate level of log
-# file verbosity.
-#
-# 0 is silent, except for fatal errors
-# 4 is reasonable for general usage
-# 5 and 6 can help to debug connection problems
-# 9 is extremely verbose
-verb 3
-
-# Silence repeating messages. At most 20
-# sequential messages of the same message
-# category will be output to the log.
-;mute 20