# 2008 June 26 # # The author disclaims copyright to this source code. In place of # a legal notice, here is a blessing: # # May you do good and not evil. # May you find forgiveness for yourself and forgive others. # May you share freely, never taking more than you give. # #************************************************************************* # This file implements regression tests for SQLite library. The focus # of this script is testing the FTS3 module's optimize() function. # set testdir [file dirname $argv0] source $testdir/tester.tcl source $testdir/fts3_common.tcl # If SQLITE_ENABLE_FTS3 is not defined, omit this file. ifcapable !fts3 { finish_test return } #************************************************************************* # Utility function to check for the expected terms in the segment # level/index. _all version does same but for entire index. proc check_terms {test level index terms} { set where "level = $level AND idx = $index" do_test $test.terms [list fts3_terms t1 $where] $terms } proc check_terms_all {test terms} { do_test $test.terms [list fts3_terms t1 1] $terms } # Utility function to check for the expected doclist for the term in # segment level/index. _all version does same for entire index. proc check_doclist {test level index term doclist} { set where "level = $level AND idx = $index" do_test $test.doclist [list fts3_doclist t1 $term $where] $doclist } proc check_doclist_all {test term doclist} { do_test $test.doclist [list fts3_doclist t1 $term 1] $doclist } #************************************************************************* # Test results when all rows are deleted and one is added back. # Previously older segments would continue to exist, but now the index # should be dropped when the table is empty. The results should look # exactly like we never added the earlier rows in the first place. db eval { DROP TABLE IF EXISTS t1; CREATE VIRTUAL TABLE t1 USING fts3(c); INSERT INTO t1 (docid, c) VALUES (1, 'This is a test'); INSERT INTO t1 (docid, c) VALUES (2, 'That was a test'); INSERT INTO t1 (docid, c) VALUES (3, 'This is a test'); DELETE FROM t1 WHERE 1=1; -- Delete each row rather than dropping table. INSERT INTO t1 (docid, c) VALUES (1, 'This is a test'); } # Should be a single initial segment. do_test fts3d-1.segments { execsql { SELECT level, idx FROM t1_segdir ORDER BY level, idx; } } {0 0} do_test fts3d-1.matches { execsql { SELECT OFFSETS(t1) FROM t1 WHERE t1 MATCH 'this OR that OR was OR a OR is OR test' ORDER BY docid; } } {{0 0 0 4 0 4 5 2 0 3 8 1 0 5 10 4}} check_terms_all fts3d-1.1 {a is test this} check_doclist_all fts3d-1.1.1 a {[1 0[2]]} check_doclist_all fts3d-1.1.2 is {[1 0[1]]} check_doclist_all fts3d-1.1.3 test {[1 0[3]]} check_doclist_all fts3d-1.1.4 this {[1 0[0]]} check_terms fts3d-1.2 0 0 {a is test this} check_doclist fts3d-1.2.1 0 0 a {[1 0[2]]} check_doclist fts3d-1.2.2 0 0 is {[1 0[1]]} check_doclist fts3d-1.2.3 0 0 test {[1 0[3]]} check_doclist fts3d-1.2.4 0 0 this {[1 0[0]]} #************************************************************************* # Test results when everything is optimized manually. # NOTE(shess): This is a copy of fts3c-1.3. I've pulled a copy here # because fts3d-2 and fts3d-3 should have identical results. db eval { DROP TABLE IF EXISTS t1; CREATE VIRTUAL TABLE t1 USING fts3(c); INSERT INTO t1 (docid, c) VALUES (1, 'This is a test'); INSERT INTO t1 (docid, c) VALUES (2, 'That was a test'); INSERT INTO t1 (docid, c) VALUES (3, 'This is a test'); DELETE FROM t1 WHERE docid IN (1,3); DROP TABLE IF EXISTS t1old; ALTER TABLE t1 RENAME TO t1old; CREATE VIRTUAL TABLE t1 USING fts3(c); INSERT INTO t1 (docid, c) SELECT docid, c FROM t1old; DROP TABLE t1old; } # Should be a single optimal segment with the same logical results. do_test fts3d-2.segments { execsql { SELECT level, idx FROM t1_segdir ORDER BY level, idx; } } {0 0} do_test fts3d-2.matches { execsql { SELECT OFFSETS(t1) FROM t1 WHERE t1 MATCH 'this OR that OR was OR a OR is OR test' ORDER BY docid; } } {{0 1 0 4 0 2 5 3 0 3 9 1 0 5 11 4}} check_terms_all fts3d-2.1 {a test that was} check_doclist_all fts3d-2.1.1 a {[2 0[2]]} check_doclist_all fts3d-2.1.2 test {[2 0[3]]} check_doclist_all fts3d-2.1.3 that {[2 0[0]]} check_doclist_all fts3d-2.1.4 was {[2 0[1]]} check_terms fts3d-2.2 0 0 {a test that was} check_doclist fts3d-2.2.1 0 0 a {[2 0[2]]} check_doclist fts3d-2.2.2 0 0 test {[2 0[3]]} check_doclist fts3d-2.2.3 0 0 that {[2 0[0]]} check_doclist fts3d-2.2.4 0 0 was {[2 0[1]]} #************************************************************************* # Test results when everything is optimized via optimize(). db eval { DROP TABLE IF EXISTS t1; CREATE VIRTUAL TABLE t1 USING fts3(c); INSERT INTO t1 (docid, c) VALUES (1, 'This is a test'); INSERT INTO t1 (docid, c) VALUES (2, 'That was a test'); INSERT INTO t1 (docid, c) VALUES (3, 'This is a test'); DELETE FROM t1 WHERE docid IN (1,3); SELECT OPTIMIZE(t1) FROM t1 LIMIT 1; } # Should be a single optimal segment with the same logical results. do_test fts3d-3.segments { execsql { SELECT level, idx FROM t1_segdir ORDER BY level, idx; } } {0 0} do_test fts3d-3.matches { execsql { SELECT OFFSETS(t1) FROM t1 WHERE t1 MATCH 'this OR that OR was OR a OR is OR test' ORDER BY docid; } } {{0 1 0 4 0 2 5 3 0 3 9 1 0 5 11 4}} check_terms_all fts3d-3.1 {a test that was} check_doclist_all fts3d-3.1.1 a {[2 0[2]]} check_doclist_all fts3d-3.1.2 test {[2 0[3]]} check_doclist_all fts3d-3.1.3 that {[2 0[0]]} check_doclist_all fts3d-3.1.4 was {[2 0[1]]} check_terms fts3d-3.2 0 0 {a test that was} check_doclist fts3d-3.2.1 0 0 a {[2 0[2]]} check_doclist fts3d-3.2.2 0 0 test {[2 0[3]]} check_doclist fts3d-3.2.3 0 0 that {[2 0[0]]} check_doclist fts3d-3.2.4 0 0 was {[2 0[1]]} #************************************************************************* # Test optimize() against a table involving segment merges. # NOTE(shess): Since there's no transaction, each of the INSERT/UPDATE # statements generates a segment. db eval { DROP TABLE IF EXISTS t1; CREATE VIRTUAL TABLE t1 USING fts3(c); INSERT INTO t1 (rowid, c) VALUES (1, 'This is a test'); INSERT INTO t1 (rowid, c) VALUES (2, 'That was a test'); INSERT INTO t1 (rowid, c) VALUES (3, 'This is a test'); UPDATE t1 SET c = 'This is a test one' WHERE rowid = 1; UPDATE t1 SET c = 'That was a test one' WHERE rowid = 2; UPDATE t1 SET c = 'This is a test one' WHERE rowid = 3; UPDATE t1 SET c = 'This is a test two' WHERE rowid = 1; UPDATE t1 SET c = 'That was a test two' WHERE rowid = 2; UPDATE t1 SET c = 'This is a test two' WHERE rowid = 3; UPDATE t1 SET c = 'This is a test three' WHERE rowid = 1; UPDATE t1 SET c = 'That was a test three' WHERE rowid = 2; UPDATE t1 SET c = 'This is a test three' WHERE rowid = 3; UPDATE t1 SET c = 'This is a test four' WHERE rowid = 1; UPDATE t1 SET c = 'That was a test four' WHERE rowid = 2; UPDATE t1 SET c = 'This is a test four' WHERE rowid = 3; UPDATE t1 SET c = 'This is a test' WHERE rowid = 1; UPDATE t1 SET c = 'That was a test' WHERE rowid = 2; UPDATE t1 SET c = 'This is a test' WHERE rowid = 3; } # 2 segments in level 0, 1 in level 1 (18 segments created, 16 # merged). do_test fts3d-4.segments { execsql { SELECT level, idx FROM t1_segdir ORDER BY level, idx; } } {0 0 0 1 1 0} do_test fts3d-4.matches { execsql { SELECT OFFSETS(t1) FROM t1 WHERE t1 MATCH 'this OR that OR was OR a OR is OR test' ORDER BY docid; } } [list {0 0 0 4 0 4 5 2 0 3 8 1 0 5 10 4} \ {0 1 0 4 0 2 5 3 0 3 9 1 0 5 11 4} \ {0 0 0 4 0 4 5 2 0 3 8 1 0 5 10 4}] puts [db eval {SELECT c FROM t1 } ] check_terms_all fts3d-4.1 {a four is test that this was} check_doclist_all fts3d-4.1.1 a {[1 0[2]] [2 0[2]] [3 0[2]]} check_doclist_all fts3d-4.1.2 four {} check_doclist_all fts3d-4.1.3 is {[1 0[1]] [3 0[1]]} #check_doclist_all fts3d-4.1.4 one {} check_doclist_all fts3d-4.1.5 test {[1 0[3]] [2 0[3]] [3 0[3]]} check_doclist_all fts3d-4.1.6 that {[2 0[0]]} check_doclist_all fts3d-4.1.7 this {[1 0[0]] [3 0[0]]} #check_doclist_all fts3d-4.1.8 three {} #check_doclist_all fts3d-4.1.9 two {} check_doclist_all fts3d-4.1.10 was {[2 0[1]]} check_terms fts3d-4.2 0 0 {a four test that was} check_doclist fts3d-4.2.1 0 0 a {[2 0[2]]} check_doclist fts3d-4.2.2 0 0 four {[2]} check_doclist fts3d-4.2.3 0 0 test {[2 0[3]]} check_doclist fts3d-4.2.4 0 0 that {[2 0[0]]} check_doclist fts3d-4.2.5 0 0 was {[2 0[1]]} check_terms fts3d-4.3 0 1 {a four is test this} check_doclist fts3d-4.3.1 0 1 a {[3 0[2]]} check_doclist fts3d-4.3.2 0 1 four {[3]} check_doclist fts3d-4.3.3 0 1 is {[3 0[1]]} check_doclist fts3d-4.3.4 0 1 test {[3 0[3]]} check_doclist fts3d-4.3.5 0 1 this {[3 0[0]]} check_terms fts3d-4.4 1 0 {a four is test that this was} check_doclist fts3d-4.4.1 1 0 a {[1 0[2]] [2 0[2]] [3 0[2]]} check_doclist fts3d-4.4.2 1 0 four {[2 0[4]] [3 0[4]]} check_doclist fts3d-4.4.3 1 0 is {[1 0[1]] [3 0[1]]} #check_doclist fts3d-4.4.4 1 0 one {[1] [2] [3]} check_doclist fts3d-4.4.5 1 0 test {[1 0[3]] [2 0[3]] [3 0[3]]} check_doclist fts3d-4.4.6 1 0 that {[2 0[0]]} check_doclist fts3d-4.4.7 1 0 this {[1 0[0]] [3 0[0]]} #check_doclist fts3d-4.4.8 1 0 three {[1] [2] [3]} #check_doclist fts3d-4.4.9 1 0 two {[1] [2] [3]} check_doclist fts3d-4.4.10 1 0 was {[2 0[1]]} # Optimize should leave the result in the level of the highest-level # prior segment. do_test fts3d-4.5 { execsql { SELECT OPTIMIZE(t1) FROM t1 LIMIT 1; SELECT level, idx FROM t1_segdir ORDER BY level, idx; } } {{Index optimized} 1 0} # Identical to fts3d-4.matches. do_test fts3d-4.5.matches { execsql { SELECT OFFSETS(t1) FROM t1 WHERE t1 MATCH 'this OR that OR was OR a OR is OR test' ORDER BY docid; } } [list {0 0 0 4 0 4 5 2 0 3 8 1 0 5 10 4} \ {0 1 0 4 0 2 5 3 0 3 9 1 0 5 11 4} \ {0 0 0 4 0 4 5 2 0 3 8 1 0 5 10 4}] check_terms_all fts3d-4.5.1 {a is test that this was} check_doclist_all fts3d-4.5.1.1 a {[1 0[2]] [2 0[2]] [3 0[2]]} check_doclist_all fts3d-4.5.1.2 is {[1 0[1]] [3 0[1]]} check_doclist_all fts3d-4.5.1.3 test {[1 0[3]] [2 0[3]] [3 0[3]]} check_doclist_all fts3d-4.5.1.4 that {[2 0[0]]} check_doclist_all fts3d-4.5.1.5 this {[1 0[0]] [3 0[0]]} check_doclist_all fts3d-4.5.1.6 was {[2 0[1]]} check_terms fts3d-4.5.2 1 0 {a is test that this was} check_doclist fts3d-4.5.2.1 1 0 a {[1 0[2]] [2 0[2]] [3 0[2]]} check_doclist fts3d-4.5.2.2 1 0 is {[1 0[1]] [3 0[1]]} check_doclist fts3d-4.5.2.3 1 0 test {[1 0[3]] [2 0[3]] [3 0[3]]} check_doclist fts3d-4.5.2.4 1 0 that {[2 0[0]]} check_doclist fts3d-4.5.2.5 1 0 this {[1 0[0]] [3 0[0]]} check_doclist fts3d-4.5.2.6 1 0 was {[2 0[1]]} # Re-optimizing does nothing. do_test fts3d-5.0 { execsql { SELECT OPTIMIZE(t1) FROM t1 LIMIT 1; SELECT level, idx FROM t1_segdir ORDER BY level, idx; } } {{Index already optimal} 1 0} # Even if we move things around, still does nothing. do_test fts3d-5.1 { execsql { UPDATE t1_segdir SET level = 2 WHERE level = 1 AND idx = 0; SELECT OPTIMIZE(t1) FROM t1 LIMIT 1; SELECT level, idx FROM t1_segdir ORDER BY level, idx; } } {{Index already optimal} 2 0} # ALTER TABLE RENAME should work regardless of the database encoding. # do_test fts3d-6.0 { db close forcedelete test.db sqlite3 db test.db db eval { PRAGMA encoding=UTF8; CREATE VIRTUAL TABLE fts USING fts3(a,b,c); SELECT name FROM sqlite_master WHERE name GLOB '???_*' ORDER BY 1; } } {fts_content fts_segdir fts_segments} do_test fts3d-6.1 { db eval { ALTER TABLE fts RENAME TO xyz; SELECT name FROM sqlite_master WHERE name GLOB '???_*' ORDER BY 1; } } {xyz_content xyz_segdir xyz_segments} do_test fts3d-6.2 { db close forcedelete test.db sqlite3 db test.db db eval { PRAGMA encoding=UTF16le; CREATE VIRTUAL TABLE fts USING fts3(a,b,c); SELECT name FROM sqlite_master WHERE name GLOB '???_*' ORDER BY 1; } } {fts_content fts_segdir fts_segments} do_test fts3d-6.3 { db eval { ALTER TABLE fts RENAME TO xyz; SELECT name FROM sqlite_master WHERE name GLOB '???_*' ORDER BY 1; } } {xyz_content xyz_segdir xyz_segments} do_test fts3d-6.4 { db close forcedelete test.db sqlite3 db test.db db eval { PRAGMA encoding=UTF16be; CREATE VIRTUAL TABLE fts USING fts3(a,b,c); SELECT name FROM sqlite_master WHERE name GLOB '???_*' ORDER BY 1; } } {fts_content fts_segdir fts_segments} do_test fts3d-6.5 { db eval { ALTER TABLE fts RENAME TO xyz; SELECT name FROM sqlite_master WHERE name GLOB '???_*' ORDER BY 1; } } {xyz_content xyz_segdir xyz_segments} # ALTER TABLE RENAME on an FTS3 table following an incr-merge op. # do_test fts3d-6.6 { execsql { INSERT INTO xyz(xyz) VALUES('merge=2,2') } sqlite3 db test.db execsql { ALTER TABLE xyz RENAME TO ott; SELECT name FROM sqlite_master WHERE name GLOB '???_*' ORDER BY 1; } } {ott_content ott_segdir ott_segments ott_stat} finish_test