From 7bb481fda9ecb134804b49c2ce77ca28f7eea583 Mon Sep 17 00:00:00 2001 From: Hans-Christoph Steiner Date: Fri, 30 Mar 2012 20:42:12 -0400 Subject: Imported Upstream version 2.0.3 --- test/io.test | 565 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 565 insertions(+) create mode 100644 test/io.test (limited to 'test/io.test') diff --git a/test/io.test b/test/io.test new file mode 100644 index 0000000..58caeee --- /dev/null +++ b/test/io.test @@ -0,0 +1,565 @@ +# 2007 August 21 +# +# The author disclaims copyright to this source code. In place of +# a legal notice, here is a blessing: +# +# May you do good and not evil. +# May you find forgiveness for yourself and forgive others. +# May you share freely, never taking more than you give. +# +#*********************************************************************** +# +# The focus of this file is testing some specific characteristics of the +# IO traffic generated by SQLite (making sure SQLite is not writing out +# more database pages than it has to, stuff like that). +# + +set testdir [file dirname $argv0] +source $testdir/tester.tcl + +db close +sqlite3_simulate_device +sqlite3 db test.db -vfs devsym + +# Test summary: +# +# io-1.* - Test that quick-balance does not journal pages unnecessarily. +# +# io-2.* - Test the "atomic-write optimization". +# +# io-3.* - Test the IO traffic enhancements triggered when the +# IOCAP_SEQUENTIAL device capability flag is set (no +# fsync() calls on the journal file). +# +# io-4.* - Test the IO traffic enhancements triggered when the +# IOCAP_SAFE_APPEND device capability flag is set (fewer +# fsync() calls on the journal file, no need to set nRec +# field in the single journal header). +# +# io-5.* - Test that the default page size is selected and used +# correctly. +# + +set ::nWrite 0 +proc nWrite {db} { + set bt [btree_from_db $db] + db_enter $db + array set stats [btree_pager_stats $bt] + db_leave $db + set res [expr $stats(write) - $::nWrite] + set ::nWrite $stats(write) + set res +} + +set ::nSync 0 +proc nSync {} { + set res [expr {$::sqlite_sync_count - $::nSync}] + set ::nSync $::sqlite_sync_count + set res +} + +do_test io-1.1 { + execsql { + PRAGMA auto_vacuum = OFF; + PRAGMA page_size = 1024; + CREATE TABLE abc(a,b); + } + nWrite db +} {2} + +# Insert into the table 4 records of aproximately 240 bytes each. +# This should completely fill the root-page of the table. Each +# INSERT causes 2 db pages to be written - the root-page of "abc" +# and page 1 (db change-counter page). +do_test io-1.2 { + set ret [list] + execsql { INSERT INTO abc VALUES(1,randstr(230,230)); } + lappend ret [nWrite db] + execsql { INSERT INTO abc VALUES(2,randstr(230,230)); } + lappend ret [nWrite db] + execsql { INSERT INTO abc VALUES(3,randstr(230,230)); } + lappend ret [nWrite db] + execsql { INSERT INTO abc VALUES(4,randstr(230,230)); } + lappend ret [nWrite db] +} {2 2 2 2} + +# Insert another 240 byte record. This causes two leaf pages +# to be added to the root page of abc. 4 pages in total +# are written to the db file - the two leaf pages, the root +# of abc and the change-counter page. +do_test io-1.3 { + execsql { INSERT INTO abc VALUES(5,randstr(230,230)); } + nWrite db +} {4} + +# Insert another 3 240 byte records. After this, the tree consists of +# the root-node, which is close to empty, and two leaf pages, both of +# which are full. +do_test io-1.4 { + set ret [list] + execsql { INSERT INTO abc VALUES(6,randstr(230,230)); } + lappend ret [nWrite db] + execsql { INSERT INTO abc VALUES(7,randstr(230,230)); } + lappend ret [nWrite db] + execsql { INSERT INTO abc VALUES(8,randstr(230,230)); } + lappend ret [nWrite db] +} {2 2 2} + +# This insert should use the quick-balance trick to add a third leaf +# to the b-tree used to store table abc. It should only be necessary to +# write to 3 pages to do this: the change-counter, the root-page and +# the new leaf page. +do_test io-1.5 { + execsql { INSERT INTO abc VALUES(9,randstr(230,230)); } + nWrite db +} {3} + +ifcapable atomicwrite { + +#---------------------------------------------------------------------- +# Test cases io-2.* test the atomic-write optimization. +# +do_test io-2.1 { + execsql { DELETE FROM abc; VACUUM; } +} {} + +# Clear the write and sync counts. +nWrite db ; nSync + +# The following INSERT updates 2 pages and requires 4 calls to fsync(): +# +# 1) The directory in which the journal file is created, +# 2) The journal file (to sync the page data), +# 3) The journal file (to sync the journal file header), +# 4) The database file. +# +do_test io-2.2 { + execsql { INSERT INTO abc VALUES(1, 2) } + list [nWrite db] [nSync] +} {2 4} + +# Set the device-characteristic mask to include the SQLITE_IOCAP_ATOMIC, +# then do another INSERT similar to the one in io-2.2. This should +# only write 1 page and require a single fsync(). +# +# The single fsync() is the database file. Only one page is reported as +# written because page 1 - the change-counter page - is written using +# an out-of-band method that bypasses the write counter. +# +sqlite3_simulate_device -char atomic +do_test io-2.3 { + execsql { INSERT INTO abc VALUES(3, 4) } + list [nWrite db] [nSync] +} {1 1} + +# Test that the journal file is not created and the change-counter is +# updated when the atomic-write optimization is used. +# +do_test io-2.4.1 { + execsql { + BEGIN; + INSERT INTO abc VALUES(5, 6); + } + sqlite3 db2 test.db -vfs devsym + execsql { SELECT * FROM abc } db2 +} {1 2 3 4} +do_test io-2.4.2 { + file exists test.db-journal +} {0} +do_test io-2.4.3 { + execsql { COMMIT } + execsql { SELECT * FROM abc } db2 +} {1 2 3 4 5 6} +db2 close + +# Test that the journal file is created and sync()d if the transaction +# modifies more than one database page, even if the IOCAP_ATOMIC flag +# is set. +# +do_test io-2.5.1 { + execsql { CREATE TABLE def(d, e) } + nWrite db ; nSync + execsql { + BEGIN; + INSERT INTO abc VALUES(7, 8); + } + file exists test.db-journal +} {0} +do_test io-2.5.2 { + execsql { INSERT INTO def VALUES('a', 'b'); } + file exists test.db-journal +} {1} +do_test io-2.5.3 { + execsql { COMMIT } + list [nWrite db] [nSync] +} {3 4} + +# Test that the journal file is created and sync()d if the transaction +# modifies a single database page and also appends a page to the file. +# Internally, this case is handled differently to the one above. The +# journal file is not actually created until the 'COMMIT' statement +# is executed. +# +# Changed 2010-03-27: The size of the database is now stored in +# bytes 28..31 and so when a page is added to the database, page 1 +# is immediately modified and the journal file immediately comes into +# existance. To fix this test, the BEGIN is changed into a a +# BEGIN IMMEDIATE and the INSERT is omitted. +# +do_test io-2.6.1 { + execsql { + BEGIN IMMEDIATE; + -- INSERT INTO abc VALUES(9, randstr(1000,1000)); + } + file exists test.db-journal +} {0} +do_test io-2.6.2 { + # Create a file at "test.db-journal". This will prevent SQLite from + # opening the journal for exclusive access. As a result, the COMMIT + # should fail with SQLITE_CANTOPEN and the transaction rolled back. + # + file mkdir test.db-journal + catchsql { + INSERT INTO abc VALUES(9, randstr(1000,1000)); + COMMIT + } +} {1 {unable to open database file}} +do_test io-2.6.3 { + forcedelete test.db-journal + catchsql { COMMIT } +} {0 {}} +do_test io-2.6.4 { + execsql { SELECT * FROM abc } +} {1 2 3 4 5 6 7 8} + +# Test that if the database modification is part of multi-file commit, +# the journal file is always created. In this case, the journal file +# is created during execution of the COMMIT statement, so we have to +# use the same technique to check that it is created as in the above +# block. +forcedelete test2.db test2.db-journal +ifcapable attach { + do_test io-2.7.1 { + execsql { + ATTACH 'test2.db' AS aux; + PRAGMA aux.page_size = 1024; + CREATE TABLE aux.abc2(a, b); + BEGIN; + INSERT INTO abc VALUES(9, 10); + } + file exists test.db-journal + } {0} + do_test io-2.7.2 { + execsql { INSERT INTO abc2 SELECT * FROM abc } + file exists test2.db-journal + } {0} + do_test io-2.7.3 { + execsql { SELECT * FROM abc UNION ALL SELECT * FROM abc2 } + } {1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10} + do_test io-2.7.4 { + file mkdir test2.db-journal + catchsql { COMMIT } + } {1 {unable to open database file}} + do_test io-2.7.5 { + forcedelete test2.db-journal + catchsql { COMMIT } + } {1 {cannot commit - no transaction is active}} + do_test io-2.7.6 { + execsql { SELECT * FROM abc UNION ALL SELECT * FROM abc2 } + } {1 2 3 4 5 6 7 8} +} + +# Try an explicit ROLLBACK before the journal file is created. +# +do_test io-2.8.1 { + execsql { + BEGIN; + DELETE FROM abc; + } + file exists test.db-journal +} {0} +do_test io-2.8.2 { + execsql { SELECT * FROM abc } +} {} +do_test io-2.8.3 { + execsql { + ROLLBACK; + SELECT * FROM abc; + } +} {1 2 3 4 5 6 7 8} + +# Test that the atomic write optimisation is not enabled if the sector +# size is larger than the page-size. +# +do_test io-2.9.1 { + db close + sqlite3 db test.db + sqlite3_simulate_device -char atomic -sectorsize 2048 + execsql { + BEGIN; + INSERT INTO abc VALUES(9, 10); + } + file exists test.db-journal +} {1} +do_test io-2.9.2 { + execsql { ROLLBACK; } + db close + forcedelete test.db test.db-journal + sqlite3 db test.db -vfs devsym + execsql { + PRAGMA auto_vacuum = OFF; + PRAGMA page_size = 2048; + CREATE TABLE abc(a, b); + } + execsql { + BEGIN; + INSERT INTO abc VALUES(9, 10); + } + file exists test.db-journal +} {0} +do_test io-2.9.3 { + execsql { COMMIT } +} {} + +# Test a couple of the more specific IOCAP_ATOMIC flags +# (i.e IOCAP_ATOMIC2K etc.). +# +do_test io-2.10.1 { + sqlite3_simulate_device -char atomic1k + execsql { + BEGIN; + INSERT INTO abc VALUES(11, 12); + } + file exists test.db-journal +} {1} +do_test io-2.10.2 { + execsql { ROLLBACK } + sqlite3_simulate_device -char atomic2k + execsql { + BEGIN; + INSERT INTO abc VALUES(11, 12); + } + file exists test.db-journal +} {0} +do_test io-2.10.3 { + execsql { ROLLBACK } +} {} + +do_test io-2.11.0 { + execsql { + PRAGMA locking_mode = exclusive; + PRAGMA locking_mode; + } +} {exclusive exclusive} +do_test io-2.11.1 { + execsql { + INSERT INTO abc VALUES(11, 12); + } + file exists test.db-journal +} {0} + +do_test io-2.11.2 { + execsql { + PRAGMA locking_mode = normal; + INSERT INTO abc VALUES(13, 14); + } + file exists test.db-journal +} {0} + +} ;# /* ifcapable atomicwrite */ + +#---------------------------------------------------------------------- +# Test cases io-3.* test the IOCAP_SEQUENTIAL optimization. +# +sqlite3_simulate_device -char sequential -sectorsize 0 +ifcapable pager_pragmas { + do_test io-3.1 { + db close + forcedelete test.db test.db-journal + sqlite3 db test.db -vfs devsym + db eval { + PRAGMA auto_vacuum=OFF; + } + # File size might be 1 due to the hack to work around ticket #3260. + # Search for #3260 in os_unix.c for additional information. + expr {[file size test.db]>1} + } {0} + do_test io-3.2 { + execsql { CREATE TABLE abc(a, b) } + nSync + execsql { + PRAGMA temp_store = memory; + PRAGMA cache_size = 10; + BEGIN; + INSERT INTO abc VALUES('hello', 'world'); + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + } + # File has grown - showing there was a cache-spill - but there + # have been no calls to fsync(). The file is probably about 30KB. + # But some VFS implementations (symbian) buffer writes so the actual + # size may be a little less than that. So this test case just tests + # that the file is now greater than 20000 bytes in size. + list [expr [file size test.db]>20000] [nSync] + } {1 0} + do_test io-3.3 { + # The COMMIT requires a single fsync() - to the database file. + execsql { COMMIT } + list [file size test.db] [nSync] + } {39936 1} +} + +#---------------------------------------------------------------------- +# Test cases io-4.* test the IOCAP_SAFE_APPEND optimization. +# +sqlite3_simulate_device -char safe_append + +# With the SAFE_APPEND flag set, simple transactions require 3, rather +# than 4, calls to fsync(). The fsync() calls are on: +# +# 1) The directory in which the journal file is created, (unix only) +# 2) The journal file (to sync the page data), +# 3) The database file. +# +# Normally, when the SAFE_APPEND flag is not set, there is another fsync() +# on the journal file between steps (2) and (3) above. +# +set expected_sync_count 2 +if {$::tcl_platform(platform)=="unix"} { + ifcapable dirsync { + incr expected_sync_count + } +} + +do_test io-4.1 { + execsql { DELETE FROM abc } + nSync + execsql { INSERT INTO abc VALUES('a', 'b') } + nSync +} $expected_sync_count + +# With SAFE_APPEND set, the nRec field of the journal file header should +# be set to 0xFFFFFFFF before the first journal sync. The nRec field +# occupies bytes 8-11 of the journal file. +# +do_test io-4.2.1 { + execsql { BEGIN } + execsql { INSERT INTO abc VALUES('c', 'd') } + file exists test.db-journal +} {1} +if {$::tcl_platform(platform)=="unix"} { + do_test io-4.2.2 { + hexio_read test.db-journal 8 4 + } {FFFFFFFF} +} +do_test io-4.2.3 { + execsql { COMMIT } + nSync +} $expected_sync_count +sqlite3_simulate_device -char safe_append + +# With SAFE_APPEND set, there should only ever be one journal-header +# written to the database, even though the sync-mode is "full". +# +do_test io-4.3.1 { + execsql { + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + INSERT INTO abc SELECT * FROM abc; + } + expr {[file size test.db]/1024} +} {43} +ifcapable pager_pragmas { + do_test io-4.3.2 { + execsql { + PRAGMA synchronous = full; + PRAGMA cache_size = 10; + PRAGMA synchronous; + } + } {2} +} +do_test io-4.3.3 { + execsql { + BEGIN; + UPDATE abc SET a = 'x'; + } + file exists test.db-journal +} {1} +if {$tcl_platform(platform) != "symbian"} { + # This test is not run on symbian because the file-buffer makes it + # difficult to predict the exact size of the file as reported by + # [file size]. + do_test io-4.3.4 { + # The UPDATE statement in the statement above modifies 41 pages + # (all pages in the database except page 1 and the root page of + # abc). Because the cache_size is set to 10, this must have required + # at least 4 cache-spills. If there were no journal headers written + # to the journal file after the cache-spill, then the size of the + # journal file is give by: + # + # = + nPage * ( + 8) + # + # If the journal file contains additional headers, this formula + # will not predict the size of the journal file. + # + file size test.db-journal + } [expr 512 + (1024+8)*41] +} + +#---------------------------------------------------------------------- +# Test cases io-5.* test that the default page size is selected and +# used correctly. +# +set tn 0 +foreach {char sectorsize pgsize} { + {} 512 1024 + {} 1024 1024 + {} 2048 2048 + {} 8192 8192 + {} 16384 8192 + {atomic} 512 8192 + {atomic512} 512 1024 + {atomic2K} 512 2048 + {atomic2K} 4096 4096 + {atomic2K atomic} 512 8192 + {atomic64K} 512 1024 +} { + incr tn + if {$pgsize>$::SQLITE_MAX_PAGE_SIZE} continue + db close + forcedelete test.db test.db-journal + sqlite3_simulate_device -char $char -sectorsize $sectorsize + sqlite3 db test.db -vfs devsym + db eval { + PRAGMA auto_vacuum=OFF; + } + ifcapable !atomicwrite { + if {[regexp {^atomic} $char]} continue + } + do_test io-5.$tn { + execsql { + CREATE TABLE abc(a, b, c); + } + expr {[file size test.db]/2} + } $pgsize +} + +sqlite3_simulate_device -char {} -sectorsize 0 +finish_test -- cgit v1.2.3