/******************************************************************************
** This file is an amalgamation of many separate C source files from SQLite
-** version 3.11.0. By combining all the individual C code files into this
+** version 3.15.2. By combining all the individual C code files into this
** single large file, the entire code can be compiled as a single translation
** unit. This allows many compilers to do optimizations that would not be
** possible if the files were compiled separately. Performance improvements
**
** This file is all you need to compile SQLite. To use SQLite in other
** programs, you need this file and the "sqlite3.h" header file that defines
-** the programming interface to the SQLite library. (If you do not have
+** the programming interface to the SQLite library. (If you do not have
** the "sqlite3.h" header file at hand, you will find a copy embedded within
** the text of this file. Search for "Begin file sqlite3.h" to find the start
** of the embedded sqlite3.h header file.) Additional code files may be needed
** Internal interface definitions for SQLite.
**
*/
-#ifndef _SQLITEINT_H_
-#define _SQLITEINT_H_
+#ifndef SQLITEINT_H
+#define SQLITEINT_H
+
+/* Special Comments:
+**
+** Some comments have special meaning to the tools that measure test
+** coverage:
+**
+** NO_TEST - The branches on this line are not
+** measured by branch coverage. This is
+** used on lines of code that actually
+** implement parts of coverage testing.
+**
+** OPTIMIZATION-IF-TRUE - This branch is allowed to alway be false
+** and the correct answer is still obtained,
+** though perhaps more slowly.
+**
+** OPTIMIZATION-IF-FALSE - This branch is allowed to alway be true
+** and the correct answer is still obtained,
+** though perhaps more slowly.
+**
+** PREVENTS-HARMLESS-OVERREAD - This branch prevents a buffer overread
+** that would be harmless and undetectable
+** if it did occur.
+**
+** In all cases, the special comment must be enclosed in the usual
+** slash-asterisk...asterisk-slash comment marks, with no spaces between the
+** asterisks and the comment text.
+*/
+
+/*
+** Make sure the Tcl calling convention macro is defined. This macro is
+** only used by test code and Tcl integration code.
+*/
+#ifndef SQLITE_TCLAPI
+# define SQLITE_TCLAPI
+#endif
+
+/*
+** Make sure that rand_s() is available on Windows systems with MSVC 2005
+** or higher.
+*/
+#if defined(_MSC_VER) && _MSC_VER>=1400
+# define _CRT_RAND_S
+#endif
/*
** Include the header file used to customize the compiler options for MSVC.
**
** This file contains code that is specific to MSVC.
*/
-#ifndef _MSVC_H_
-#define _MSVC_H_
+#ifndef SQLITE_MSVC_H
+#define SQLITE_MSVC_H
#if defined(_MSC_VER)
#pragma warning(disable : 4054)
#pragma warning(disable : 4706)
#endif /* defined(_MSC_VER) */
-#endif /* _MSVC_H_ */
+#endif /* SQLITE_MSVC_H */
/************** End of msvc.h ************************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
** the version number) and changes its name to "sqlite3.h" as
** part of the build process.
*/
-#ifndef _SQLITE3_H_
-#define _SQLITE3_H_
+#ifndef SQLITE3_H
+#define SQLITE3_H
#include <stdarg.h> /* Needed for the definition of va_list */
/*
#ifndef SQLITE_CDECL
# define SQLITE_CDECL
#endif
+#ifndef SQLITE_APICALL
+# define SQLITE_APICALL
+#endif
#ifndef SQLITE_STDCALL
-# define SQLITE_STDCALL
+# define SQLITE_STDCALL SQLITE_APICALL
+#endif
+#ifndef SQLITE_CALLBACK
+# define SQLITE_CALLBACK
+#endif
+#ifndef SQLITE_SYSAPI
+# define SQLITE_SYSAPI
#endif
/*
** be held constant and Z will be incremented or else Y will be incremented
** and Z will be reset to zero.
**
-** Since version 3.6.18, SQLite source code has been stored in the
+** Since [version 3.6.18] ([dateof:3.6.18]),
+** SQLite source code has been stored in the
** <a href="http://www.fossil-scm.org/">Fossil configuration management
** system</a>. ^The SQLITE_SOURCE_ID macro evaluates to
** a string which identifies a particular check-in of SQLite
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
-#define SQLITE_VERSION "3.11.0"
-#define SQLITE_VERSION_NUMBER 3011000
-#define SQLITE_SOURCE_ID "2016-02-15 17:29:24 3d862f207e3adc00f78066799ac5a8c282430a5f"
+#define SQLITE_VERSION "3.15.2"
+#define SQLITE_VERSION_NUMBER 3015002
+#define SQLITE_SOURCE_ID "2016-11-28 19:13:37 bbd85d235f7037c6a033a9690534391ffeacecc8"
/*
** CAPI3REF: Run-Time Library Version Numbers
** See also: [sqlite_version()] and [sqlite_source_id()].
*/
SQLITE_API const char sqlite3_version[] = SQLITE_VERSION;
-SQLITE_API const char *SQLITE_STDCALL sqlite3_libversion(void);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sourceid(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_libversion_number(void);
+SQLITE_API const char *sqlite3_libversion(void);
+SQLITE_API const char *sqlite3_sourceid(void);
+SQLITE_API int sqlite3_libversion_number(void);
/*
** CAPI3REF: Run-Time Library Compilation Options Diagnostics
** [sqlite_compileoption_get()] and the [compile_options pragma].
*/
#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
-SQLITE_API int SQLITE_STDCALL sqlite3_compileoption_used(const char *zOptName);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_compileoption_get(int N);
+SQLITE_API int sqlite3_compileoption_used(const char *zOptName);
+SQLITE_API const char *sqlite3_compileoption_get(int N);
#endif
/*
**
** See the [threading mode] documentation for additional information.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_threadsafe(void);
+SQLITE_API int sqlite3_threadsafe(void);
/*
** CAPI3REF: Database Connection Handle
** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer
** argument is a harmless no-op.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_close(sqlite3*);
-SQLITE_API int SQLITE_STDCALL sqlite3_close_v2(sqlite3*);
+SQLITE_API int sqlite3_close(sqlite3*);
+SQLITE_API int sqlite3_close_v2(sqlite3*);
/*
** The type for a callback function.
** the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.
** </ul>
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_exec(
+SQLITE_API int sqlite3_exec(
sqlite3*, /* An open database */
const char *sql, /* SQL to be evaluated */
int (*callback)(void*,int,char**,char**), /* Callback function */
** [result codes]. However, experience has shown that many of
** these result codes are too coarse-grained. They do not provide as
** much information about problems as programmers might like. In an effort to
-** address this, newer versions of SQLite (version 3.3.8 and later) include
+** address this, newer versions of SQLite (version 3.3.8 [dateof:3.3.8]
+** and later) include
** support for additional result codes that provide more detailed information
** about errors. These [extended result codes] are enabled or disabled
** on a per database connection basis using the
#define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8))
#define SQLITE_WARNING_AUTOINDEX (SQLITE_WARNING | (1<<8))
#define SQLITE_AUTH_USER (SQLITE_AUTH | (1<<8))
+#define SQLITE_OK_LOAD_PERMANENTLY (SQLITE_OK | (1<<8))
/*
** CAPI3REF: Flags For File Open Operations
** on whether or not the file has been renamed, moved, or deleted since it
** was first opened.
**
+** <li>[[SQLITE_FCNTL_WIN32_GET_HANDLE]]
+** The [SQLITE_FCNTL_WIN32_GET_HANDLE] opcode can be used to obtain the
+** underlying native file handle associated with a file handle. This file
+** control interprets its argument as a pointer to a native file handle and
+** writes the resulting value there.
+**
** <li>[[SQLITE_FCNTL_WIN32_SET_HANDLE]]
** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging. This
** opcode causes the xFileControl method to swap the file handle with the one
#define SQLITE_FCNTL_RBU 26
#define SQLITE_FCNTL_VFS_POINTER 27
#define SQLITE_FCNTL_JOURNAL_POINTER 28
+#define SQLITE_FCNTL_WIN32_GET_HANDLE 29
/* deprecated names */
#define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE
typedef struct sqlite3_mutex sqlite3_mutex;
/*
+** CAPI3REF: Loadable Extension Thunk
+**
+** A pointer to the opaque sqlite3_api_routines structure is passed as
+** the third parameter to entry points of [loadable extensions]. This
+** structure must be typedefed in order to work around compiler warnings
+** on some platforms.
+*/
+typedef struct sqlite3_api_routines sqlite3_api_routines;
+
+/*
** CAPI3REF: OS Interface Object
**
** An instance of the sqlite3_vfs object defines the interface between
const char *(*xNextSystemCall)(sqlite3_vfs*, const char *zName);
/*
** The methods above are in versions 1 through 3 of the sqlite_vfs object.
- ** New fields may be appended in figure versions. The iVersion
+ ** New fields may be appended in future versions. The iVersion
** value will increment whenever this happens.
*/
};
** must return [SQLITE_OK] on success and some other [error code] upon
** failure.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_initialize(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_shutdown(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_init(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void);
+SQLITE_API int sqlite3_initialize(void);
+SQLITE_API int sqlite3_shutdown(void);
+SQLITE_API int sqlite3_os_init(void);
+SQLITE_API int sqlite3_os_end(void);
/*
** CAPI3REF: Configuring The SQLite Library
** ^If the option is unknown or SQLite is unable to set the option
** then this routine returns a non-zero [error code].
*/
-SQLITE_API int SQLITE_CDECL sqlite3_config(int, ...);
+SQLITE_API int sqlite3_config(int, ...);
/*
** CAPI3REF: Configure database connections
** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if
** the call is considered successful.
*/
-SQLITE_API int SQLITE_CDECL sqlite3_db_config(sqlite3*, int op, ...);
+SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...);
/*
** CAPI3REF: Memory Allocation Routines
** is enabled (using the [PRAGMA threads] command) and the amount of content
** to be sorted exceeds the page size times the minimum of the
** [PRAGMA cache_size] setting and this value.
+**
+** [[SQLITE_CONFIG_STMTJRNL_SPILL]]
+** <dt>SQLITE_CONFIG_STMTJRNL_SPILL
+** <dd>^The SQLITE_CONFIG_STMTJRNL_SPILL option takes a single parameter which
+** becomes the [statement journal] spill-to-disk threshold.
+** [Statement journals] are held in memory until their size (in bytes)
+** exceeds this threshold, at which point they are written to disk.
+** Or if the threshold is -1, statement journals are always held
+** exclusively in memory.
+** Since many statement journals never become large, setting the spill
+** threshold to a value such as 64KiB can greatly reduce the amount of
+** I/O required to support statement rollback.
+** The default value for this setting is controlled by the
+** [SQLITE_STMTJRNL_SPILL] compile-time option.
** </dl>
*/
#define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */
#define SQLITE_CONFIG_WIN32_HEAPSIZE 23 /* int nByte */
#define SQLITE_CONFIG_PCACHE_HDRSZ 24 /* int *psz */
#define SQLITE_CONFIG_PMASZ 25 /* unsigned int szPma */
+#define SQLITE_CONFIG_STMTJRNL_SPILL 26 /* int nByte */
/*
** CAPI3REF: Database Connection Configuration Options
** following this call. The second parameter may be a NULL pointer, in
** which case the trigger setting is not reported back. </dd>
**
+** <dt>SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER</dt>
+** <dd> ^This option is used to enable or disable the two-argument
+** version of the [fts3_tokenizer()] function which is part of the
+** [FTS3] full-text search engine extension.
+** There should be two additional arguments.
+** The first argument is an integer which is 0 to disable fts3_tokenizer() or
+** positive to enable fts3_tokenizer() or negative to leave the setting
+** unchanged.
+** The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether fts3_tokenizer is disabled or enabled
+** following this call. The second parameter may be a NULL pointer, in
+** which case the new setting is not reported back. </dd>
+**
+** <dt>SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION</dt>
+** <dd> ^This option is used to enable or disable the [sqlite3_load_extension()]
+** interface independently of the [load_extension()] SQL function.
+** The [sqlite3_enable_load_extension()] API enables or disables both the
+** C-API [sqlite3_load_extension()] and the SQL function [load_extension()].
+** There should be two additional arguments.
+** When the first argument to this interface is 1, then only the C-API is
+** enabled and the SQL function remains disabled. If the first argument to
+** this interface is 0, then both the C-API and the SQL function are disabled.
+** If the first argument is -1, then no changes are made to state of either the
+** C-API or the SQL function.
+** The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether [sqlite3_load_extension()] interface
+** is disabled or enabled following this call. The second parameter may
+** be a NULL pointer, in which case the new setting is not reported back.
+** </dd>
+**
+** <dt>SQLITE_DBCONFIG_MAINDBNAME</dt>
+** <dd> ^This option is used to change the name of the "main" database
+** schema. ^The sole argument is a pointer to a constant UTF8 string
+** which will become the new schema name in place of "main". ^SQLite
+** does not make a copy of the new main schema name string, so the application
+** must ensure that the argument passed into this DBCONFIG option is unchanged
+** until after the database connection closes.
+** </dd>
+**
** </dl>
*/
-#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */
-#define SQLITE_DBCONFIG_ENABLE_FKEY 1002 /* int int* */
-#define SQLITE_DBCONFIG_ENABLE_TRIGGER 1003 /* int int* */
+#define SQLITE_DBCONFIG_MAINDBNAME 1000 /* const char* */
+#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */
+#define SQLITE_DBCONFIG_ENABLE_FKEY 1002 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_TRIGGER 1003 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */
/*
** [extended result codes] feature of SQLite. ^The extended result
** codes are disabled by default for historical compatibility.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_result_codes(sqlite3*, int onoff);
+SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
/*
** CAPI3REF: Last Insert Rowid
** unpredictable and might not equal either the old or the new
** last insert [rowid].
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_last_insert_rowid(sqlite3*);
+SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
/*
** CAPI3REF: Count The Number Of Rows Modified
** while [sqlite3_changes()] is running then the value returned
** is unpredictable and not meaningful.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_changes(sqlite3*);
+SQLITE_API int sqlite3_changes(sqlite3*);
/*
** CAPI3REF: Total Number Of Rows Modified
** while [sqlite3_total_changes()] is running then the value
** returned is unpredictable and not meaningful.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_total_changes(sqlite3*);
+SQLITE_API int sqlite3_total_changes(sqlite3*);
/*
** CAPI3REF: Interrupt A Long-Running Query
** If the database connection closes while [sqlite3_interrupt()]
** is running then bad things will likely happen.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_interrupt(sqlite3*);
+SQLITE_API void sqlite3_interrupt(sqlite3*);
/*
** CAPI3REF: Determine If An SQL Statement Is Complete
** The input to [sqlite3_complete16()] must be a zero-terminated
** UTF-16 string in native byte order.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_complete(const char *sql);
-SQLITE_API int SQLITE_STDCALL sqlite3_complete16(const void *sql);
+SQLITE_API int sqlite3_complete(const char *sql);
+SQLITE_API int sqlite3_complete16(const void *sql);
/*
** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
** A busy handler must not close the database connection
** or [prepared statement] that invoked the busy handler.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
+SQLITE_API int sqlite3_busy_handler(sqlite3*,int(*)(void*,int),void*);
/*
** CAPI3REF: Set A Busy Timeout
**
** See also: [PRAGMA busy_timeout]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_timeout(sqlite3*, int ms);
+SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
/*
** CAPI3REF: Convenience Routines For Running Queries
** reflected in subsequent calls to [sqlite3_errcode()] or
** [sqlite3_errmsg()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_get_table(
+SQLITE_API int sqlite3_get_table(
sqlite3 *db, /* An open database */
const char *zSql, /* SQL to be evaluated */
char ***pazResult, /* Results of the query */
int *pnColumn, /* Number of result columns written here */
char **pzErrmsg /* Error msg written here */
);
-SQLITE_API void SQLITE_STDCALL sqlite3_free_table(char **result);
+SQLITE_API void sqlite3_free_table(char **result);
/*
** CAPI3REF: Formatted String Printing Functions
** addition that after the string has been read and copied into
** the result, [sqlite3_free()] is called on the input string.)^
*/
-SQLITE_API char *SQLITE_CDECL sqlite3_mprintf(const char*,...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vmprintf(const char*, va_list);
-SQLITE_API char *SQLITE_CDECL sqlite3_snprintf(int,char*,const char*, ...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vsnprintf(int,char*,const char*, va_list);
+SQLITE_API char *sqlite3_mprintf(const char*,...);
+SQLITE_API char *sqlite3_vmprintf(const char*, va_list);
+SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...);
+SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list);
/*
** CAPI3REF: Memory Allocation Subsystem
** a block of memory after it has been released using
** [sqlite3_free()] or [sqlite3_realloc()].
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc(int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc64(sqlite3_uint64);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc(void*, int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc64(void*, sqlite3_uint64);
-SQLITE_API void SQLITE_STDCALL sqlite3_free(void*);
-SQLITE_API sqlite3_uint64 SQLITE_STDCALL sqlite3_msize(void*);
+SQLITE_API void *sqlite3_malloc(int);
+SQLITE_API void *sqlite3_malloc64(sqlite3_uint64);
+SQLITE_API void *sqlite3_realloc(void*, int);
+SQLITE_API void *sqlite3_realloc64(void*, sqlite3_uint64);
+SQLITE_API void sqlite3_free(void*);
+SQLITE_API sqlite3_uint64 sqlite3_msize(void*);
/*
** CAPI3REF: Memory Allocator Statistics
** by [sqlite3_memory_highwater(1)] is the high-water mark
** prior to the reset.
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_used(void);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_highwater(int resetFlag);
+SQLITE_API sqlite3_int64 sqlite3_memory_used(void);
+SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
/*
** CAPI3REF: Pseudo-Random Number Generator
** internally and without recourse to the [sqlite3_vfs] xRandomness
** method.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *P);
+SQLITE_API void sqlite3_randomness(int N, void *P);
/*
** CAPI3REF: Compile-Time Authorization Callbacks
** as stated in the previous paragraph, sqlite3_step() invokes
** sqlite3_prepare_v2() to reprepare a statement after a schema change.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_set_authorizer(
+SQLITE_API int sqlite3_set_authorizer(
sqlite3*,
int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
void *pUserData
** CAPI3REF: Tracing And Profiling Functions
** METHOD: sqlite3
**
+** These routines are deprecated. Use the [sqlite3_trace_v2()] interface
+** instead of the routines described here.
+**
** These routines register callback functions that can be used for
** tracing and profiling the execution of SQL statements.
**
** sqlite3_profile() function is considered experimental and is
** subject to change in future versions of SQLite.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
-SQLITE_API SQLITE_EXPERIMENTAL void *SQLITE_STDCALL sqlite3_profile(sqlite3*,
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_trace(sqlite3*,
+ void(*xTrace)(void*,const char*), void*);
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*,
void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
/*
+** CAPI3REF: SQL Trace Event Codes
+** KEYWORDS: SQLITE_TRACE
+**
+** These constants identify classes of events that can be monitored
+** using the [sqlite3_trace_v2()] tracing logic. The third argument
+** to [sqlite3_trace_v2()] is an OR-ed combination of one or more of
+** the following constants. ^The first argument to the trace callback
+** is one of the following constants.
+**
+** New tracing constants may be added in future releases.
+**
+** ^A trace callback has four arguments: xCallback(T,C,P,X).
+** ^The T argument is one of the integer type codes above.
+** ^The C argument is a copy of the context pointer passed in as the
+** fourth argument to [sqlite3_trace_v2()].
+** The P and X arguments are pointers whose meanings depend on T.
+**
+** <dl>
+** [[SQLITE_TRACE_STMT]] <dt>SQLITE_TRACE_STMT</dt>
+** <dd>^An SQLITE_TRACE_STMT callback is invoked when a prepared statement
+** first begins running and possibly at other times during the
+** execution of the prepared statement, such as at the start of each
+** trigger subprogram. ^The P argument is a pointer to the
+** [prepared statement]. ^The X argument is a pointer to a string which
+** is the unexpanded SQL text of the prepared statement or an SQL comment
+** that indicates the invocation of a trigger. ^The callback can compute
+** the same text that would have been returned by the legacy [sqlite3_trace()]
+** interface by using the X argument when X begins with "--" and invoking
+** [sqlite3_expanded_sql(P)] otherwise.
+**
+** [[SQLITE_TRACE_PROFILE]] <dt>SQLITE_TRACE_PROFILE</dt>
+** <dd>^An SQLITE_TRACE_PROFILE callback provides approximately the same
+** information as is provided by the [sqlite3_profile()] callback.
+** ^The P argument is a pointer to the [prepared statement] and the
+** X argument points to a 64-bit integer which is the estimated of
+** the number of nanosecond that the prepared statement took to run.
+** ^The SQLITE_TRACE_PROFILE callback is invoked when the statement finishes.
+**
+** [[SQLITE_TRACE_ROW]] <dt>SQLITE_TRACE_ROW</dt>
+** <dd>^An SQLITE_TRACE_ROW callback is invoked whenever a prepared
+** statement generates a single row of result.
+** ^The P argument is a pointer to the [prepared statement] and the
+** X argument is unused.
+**
+** [[SQLITE_TRACE_CLOSE]] <dt>SQLITE_TRACE_CLOSE</dt>
+** <dd>^An SQLITE_TRACE_CLOSE callback is invoked when a database
+** connection closes.
+** ^The P argument is a pointer to the [database connection] object
+** and the X argument is unused.
+** </dl>
+*/
+#define SQLITE_TRACE_STMT 0x01
+#define SQLITE_TRACE_PROFILE 0x02
+#define SQLITE_TRACE_ROW 0x04
+#define SQLITE_TRACE_CLOSE 0x08
+
+/*
+** CAPI3REF: SQL Trace Hook
+** METHOD: sqlite3
+**
+** ^The sqlite3_trace_v2(D,M,X,P) interface registers a trace callback
+** function X against [database connection] D, using property mask M
+** and context pointer P. ^If the X callback is
+** NULL or if the M mask is zero, then tracing is disabled. The
+** M argument should be the bitwise OR-ed combination of
+** zero or more [SQLITE_TRACE] constants.
+**
+** ^Each call to either sqlite3_trace() or sqlite3_trace_v2() overrides
+** (cancels) any prior calls to sqlite3_trace() or sqlite3_trace_v2().
+**
+** ^The X callback is invoked whenever any of the events identified by
+** mask M occur. ^The integer return value from the callback is currently
+** ignored, though this may change in future releases. Callback
+** implementations should return zero to ensure future compatibility.
+**
+** ^A trace callback is invoked with four arguments: callback(T,C,P,X).
+** ^The T argument is one of the [SQLITE_TRACE]
+** constants to indicate why the callback was invoked.
+** ^The C argument is a copy of the context pointer.
+** The P and X arguments are pointers whose meanings depend on T.
+**
+** The sqlite3_trace_v2() interface is intended to replace the legacy
+** interfaces [sqlite3_trace()] and [sqlite3_profile()], both of which
+** are deprecated.
+*/
+SQLITE_API int sqlite3_trace_v2(
+ sqlite3*,
+ unsigned uMask,
+ int(*xCallback)(unsigned,void*,void*,void*),
+ void *pCtx
+);
+
+/*
** CAPI3REF: Query Progress Callbacks
** METHOD: sqlite3
**
** database connections for the meaning of "modify" in this paragraph.
**
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
+SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
/*
** CAPI3REF: Opening A New Database Connection
**
** See also: [sqlite3_temp_directory]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_open(
+SQLITE_API int sqlite3_open(
const char *filename, /* Database filename (UTF-8) */
sqlite3 **ppDb /* OUT: SQLite db handle */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_open16(
+SQLITE_API int sqlite3_open16(
const void *filename, /* Database filename (UTF-16) */
sqlite3 **ppDb /* OUT: SQLite db handle */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_open_v2(
+SQLITE_API int sqlite3_open_v2(
const char *filename, /* Database filename (UTF-8) */
sqlite3 **ppDb, /* OUT: SQLite db handle */
int flags, /* Flags */
** VFS method, then the behavior of this routine is undefined and probably
** undesirable.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_uri_parameter(const char *zFilename, const char *zParam);
-SQLITE_API int SQLITE_STDCALL sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
+SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam);
+SQLITE_API int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
+SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
/*
** was invoked incorrectly by the application. In that case, the
** error code and message may or may not be set.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_errcode(sqlite3 *db);
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_errcode(sqlite3 *db);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errmsg(sqlite3*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_errmsg16(sqlite3*);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errstr(int);
+SQLITE_API int sqlite3_errcode(sqlite3 *db);
+SQLITE_API int sqlite3_extended_errcode(sqlite3 *db);
+SQLITE_API const char *sqlite3_errmsg(sqlite3*);
+SQLITE_API const void *sqlite3_errmsg16(sqlite3*);
+SQLITE_API const char *sqlite3_errstr(int);
/*
** CAPI3REF: Prepared Statement Object
**
** New run-time limit categories may be added in future releases.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3*, int id, int newVal);
+SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
/*
** CAPI3REF: Run-Time Limit Categories
** </li>
** </ol>
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare(
+SQLITE_API int sqlite3_prepare(
sqlite3 *db, /* Database handle */
const char *zSql, /* SQL statement, UTF-8 encoded */
int nByte, /* Maximum length of zSql in bytes. */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const char **pzTail /* OUT: Pointer to unused portion of zSql */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare_v2(
+SQLITE_API int sqlite3_prepare_v2(
sqlite3 *db, /* Database handle */
const char *zSql, /* SQL statement, UTF-8 encoded */
int nByte, /* Maximum length of zSql in bytes. */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const char **pzTail /* OUT: Pointer to unused portion of zSql */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16(
+SQLITE_API int sqlite3_prepare16(
sqlite3 *db, /* Database handle */
const void *zSql, /* SQL statement, UTF-16 encoded */
int nByte, /* Maximum length of zSql in bytes. */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const void **pzTail /* OUT: Pointer to unused portion of zSql */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16_v2(
+SQLITE_API int sqlite3_prepare16_v2(
sqlite3 *db, /* Database handle */
const void *zSql, /* SQL statement, UTF-16 encoded */
int nByte, /* Maximum length of zSql in bytes. */
** CAPI3REF: Retrieving Statement SQL
** METHOD: sqlite3_stmt
**
-** ^This interface can be used to retrieve a saved copy of the original
-** SQL text used to create a [prepared statement] if that statement was
-** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].
+** ^The sqlite3_sql(P) interface returns a pointer to a copy of the UTF-8
+** SQL text used to create [prepared statement] P if P was
+** created by either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].
+** ^The sqlite3_expanded_sql(P) interface returns a pointer to a UTF-8
+** string containing the SQL text of prepared statement P with
+** [bound parameters] expanded.
+**
+** ^(For example, if a prepared statement is created using the SQL
+** text "SELECT $abc,:xyz" and if parameter $abc is bound to integer 2345
+** and parameter :xyz is unbound, then sqlite3_sql() will return
+** the original string, "SELECT $abc,:xyz" but sqlite3_expanded_sql()
+** will return "SELECT 2345,NULL".)^
+**
+** ^The sqlite3_expanded_sql() interface returns NULL if insufficient memory
+** is available to hold the result, or if the result would exceed the
+** the maximum string length determined by the [SQLITE_LIMIT_LENGTH].
+**
+** ^The [SQLITE_TRACE_SIZE_LIMIT] compile-time option limits the size of
+** bound parameter expansions. ^The [SQLITE_OMIT_TRACE] compile-time
+** option causes sqlite3_expanded_sql() to always return NULL.
+**
+** ^The string returned by sqlite3_sql(P) is managed by SQLite and is
+** automatically freed when the prepared statement is finalized.
+** ^The string returned by sqlite3_expanded_sql(P), on the other hand,
+** is obtained from [sqlite3_malloc()] and must be free by the application
+** by passing it to [sqlite3_free()].
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sql(sqlite3_stmt *pStmt);
+SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt);
+SQLITE_API char *sqlite3_expanded_sql(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Determine If An SQL Statement Writes The Database
** change the configuration of a database connection, they do not make
** changes to the content of the database files on disk.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Determine If A Prepared Statement Has Been Reset
** for example, in diagnostic routines to search for prepared
** statements that are holding a transaction open.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_busy(sqlite3_stmt*);
+SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*);
/*
** CAPI3REF: Dynamically Typed Value Object
** See also: [sqlite3_bind_parameter_count()],
** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
+SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
+SQLITE_API int sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_double(sqlite3_stmt*, int, double);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int(sqlite3_stmt*, int, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_null(sqlite3_stmt*, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
+SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double);
+SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int);
+SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
+SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int);
+SQLITE_API int sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
+SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
+SQLITE_API int sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
void(*)(void*), unsigned char encoding);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
+SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
+SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
+SQLITE_API int sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
/*
** CAPI3REF: Number Of SQL Parameters
** [sqlite3_bind_parameter_name()], and
** [sqlite3_bind_parameter_index()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_count(sqlite3_stmt*);
+SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*);
/*
** CAPI3REF: Name Of A Host Parameter
** [sqlite3_bind_parameter_count()], and
** [sqlite3_bind_parameter_index()].
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_bind_parameter_name(sqlite3_stmt*, int);
+SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int);
/*
** CAPI3REF: Index Of A Parameter With A Given Name
** [sqlite3_bind_parameter_count()], and
** [sqlite3_bind_parameter_name()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
+SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
/*
** CAPI3REF: Reset All Bindings On A Prepared Statement
** the [sqlite3_bind_blob | bindings] on a [prepared statement].
** ^Use this routine to reset all host parameters to NULL.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_clear_bindings(sqlite3_stmt*);
+SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*);
/*
** CAPI3REF: Number Of Columns In A Result Set
**
** See also: [sqlite3_data_count()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_column_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Column Names In A Result Set
** then the name of the column is unspecified and may change from
** one release of SQLite to the next.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_name(sqlite3_stmt*, int N);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_name16(sqlite3_stmt*, int N);
+SQLITE_API const char *sqlite3_column_name(sqlite3_stmt*, int N);
+SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt*, int N);
/*
** CAPI3REF: Source Of Data In A Query Result
** for the same [prepared statement] and result column
** at the same time then the results are undefined.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_database_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_database_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_table_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_table_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_origin_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_origin_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_database_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_table_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
/*
** CAPI3REF: Declared Datatype Of A Query Result
** is associated with individual values, not with the containers
** used to hold those values.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_decltype(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_decltype16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
/*
** CAPI3REF: Evaluate An SQL Statement
** other than [SQLITE_ROW] before any subsequent invocation of
** sqlite3_step(). Failure to reset the prepared statement using
** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from
-** sqlite3_step(). But after version 3.6.23.1, sqlite3_step() began
+** sqlite3_step(). But after [version 3.6.23.1] ([dateof:3.6.23.1],
+** sqlite3_step() began
** calling [sqlite3_reset()] automatically in this circumstance rather
** than returning [SQLITE_MISUSE]. This is not considered a compatibility
** break because any application that ever receives an SQLITE_MISUSE error
** then the more specific [error codes] are returned directly
** by sqlite3_step(). The use of the "v2" interface is recommended.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_step(sqlite3_stmt*);
+SQLITE_API int sqlite3_step(sqlite3_stmt*);
/*
** CAPI3REF: Number of columns in a result set
**
** See also: [sqlite3_column_count()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Fundamental Datatypes
** pointer. Subsequent calls to [sqlite3_errcode()] will return
** [SQLITE_NOMEM].)^
*/
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_blob(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
-SQLITE_API double SQLITE_STDCALL sqlite3_column_double(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_int(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_column_int64(sqlite3_stmt*, int iCol);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_column_text(sqlite3_stmt*, int iCol);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_text16(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_type(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_column_value(sqlite3_stmt*, int iCol);
+SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
+SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_int(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol);
+SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol);
+SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
/*
** CAPI3REF: Destroy A Prepared Statement Object
** statement after it has been finalized can result in undefined and
** undesirable behavior such as segfaults and heap corruption.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_finalize(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Reset A Prepared Statement Object
** ^The [sqlite3_reset(S)] interface does not change the values
** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_reset(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Create Or Redefine SQL Functions
** close the database connection nor finalize or reset the prepared
** statement in which the function is running.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function(
+SQLITE_API int sqlite3_create_function(
sqlite3 *db,
const char *zFunctionName,
int nArg,
void (*xStep)(sqlite3_context*,int,sqlite3_value**),
void (*xFinal)(sqlite3_context*)
);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function16(
+SQLITE_API int sqlite3_create_function16(
sqlite3 *db,
const void *zFunctionName,
int nArg,
void (*xStep)(sqlite3_context*,int,sqlite3_value**),
void (*xFinal)(sqlite3_context*)
);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function_v2(
+SQLITE_API int sqlite3_create_function_v2(
sqlite3 *db,
const char *zFunctionName,
int nArg,
** these functions, we will not explain what they do.
*/
#ifndef SQLITE_OMIT_DEPRECATED
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_aggregate_count(sqlite3_context*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_expired(sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_global_recover(void);
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_thread_cleanup(void);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
+SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
void*,sqlite3_int64);
#endif
** These routines must be called from the same thread as
** the SQL function that supplied the [sqlite3_value*] parameters.
*/
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_blob(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes16(sqlite3_value*);
-SQLITE_API double SQLITE_STDCALL sqlite3_value_double(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_int(sqlite3_value*);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_value_int64(sqlite3_value*);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_value_text(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16le(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16be(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_type(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_numeric_type(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_blob(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes16(sqlite3_value*);
+SQLITE_API double sqlite3_value_double(sqlite3_value*);
+SQLITE_API int sqlite3_value_int(sqlite3_value*);
+SQLITE_API sqlite3_int64 sqlite3_value_int64(sqlite3_value*);
+SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16le(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16be(sqlite3_value*);
+SQLITE_API int sqlite3_value_type(sqlite3_value*);
+SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);
/*
** CAPI3REF: Finding The Subtype Of SQL Values
** from the result of one [application-defined SQL function] into the
** input of another.
*/
-SQLITE_API unsigned int SQLITE_STDCALL sqlite3_value_subtype(sqlite3_value*);
+SQLITE_API unsigned int sqlite3_value_subtype(sqlite3_value*);
/*
** CAPI3REF: Copy And Free SQL Values
** previously obtained from [sqlite3_value_dup()]. ^If V is a NULL pointer
** then sqlite3_value_free(V) is a harmless no-op.
*/
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_value_dup(const sqlite3_value*);
-SQLITE_API void SQLITE_STDCALL sqlite3_value_free(sqlite3_value*);
+SQLITE_API sqlite3_value *sqlite3_value_dup(const sqlite3_value*);
+SQLITE_API void sqlite3_value_free(sqlite3_value*);
/*
** CAPI3REF: Obtain Aggregate Function Context
** This routine must be called from the same thread in which
** the aggregate SQL function is running.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_aggregate_context(sqlite3_context*, int nBytes);
+SQLITE_API void *sqlite3_aggregate_context(sqlite3_context*, int nBytes);
/*
** CAPI3REF: User Data For Functions
** This routine must be called from the same thread in which
** the application-defined function is running.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_user_data(sqlite3_context*);
+SQLITE_API void *sqlite3_user_data(sqlite3_context*);
/*
** CAPI3REF: Database Connection For Functions
** and [sqlite3_create_function16()] routines that originally
** registered the application defined function.
*/
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_context_db_handle(sqlite3_context*);
+SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
/*
** CAPI3REF: Function Auxiliary Data
** SQLite will invoke the destructor function X with parameter P exactly
** once, when the metadata is discarded.
** SQLite is free to discard the metadata at any time, including: <ul>
-** <li> when the corresponding function parameter changes, or
-** <li> when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
-** SQL statement, or
-** <li> when sqlite3_set_auxdata() is invoked again on the same parameter, or
-** <li> during the original sqlite3_set_auxdata() call when a memory
-** allocation error occurs. </ul>)^
+** <li> ^(when the corresponding function parameter changes)^, or
+** <li> ^(when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
+** SQL statement)^, or
+** <li> ^(when sqlite3_set_auxdata() is invoked again on the same
+** parameter)^, or
+** <li> ^(during the original sqlite3_set_auxdata() call when a memory
+** allocation error occurs.)^ </ul>
**
** Note the last bullet in particular. The destructor X in
** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the
** These routines must be called from the same thread in which
** the SQL function is running.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_get_auxdata(sqlite3_context*, int N);
-SQLITE_API void SQLITE_STDCALL sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
+SQLITE_API void *sqlite3_get_auxdata(sqlite3_context*, int N);
+SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
/*
** than the one containing the application-defined function that received
** the [sqlite3_context] pointer, the results are undefined.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob64(sqlite3_context*,const void*,
+SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_blob64(sqlite3_context*,const void*,
sqlite3_uint64,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_double(sqlite3_context*, double);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error(sqlite3_context*, const char*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error16(sqlite3_context*, const void*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_toobig(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_nomem(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_code(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_null(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
+SQLITE_API void sqlite3_result_double(sqlite3_context*, double);
+SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int);
+SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int);
+SQLITE_API void sqlite3_result_error_toobig(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_nomem(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_code(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
+SQLITE_API void sqlite3_result_null(sqlite3_context*);
+SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
void(*)(void*), unsigned char encoding);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_value(sqlite3_context*, sqlite3_value*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_zeroblob(sqlite3_context*, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
+SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
+SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n);
+SQLITE_API int sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
/*
** The number of subtype bytes preserved by SQLite might increase
** in future releases of SQLite.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_result_subtype(sqlite3_context*,unsigned int);
+SQLITE_API void sqlite3_result_subtype(sqlite3_context*,unsigned int);
/*
** CAPI3REF: Define New Collating Sequences
**
** See also: [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation(
+SQLITE_API int sqlite3_create_collation(
sqlite3*,
const char *zName,
int eTextRep,
void *pArg,
int(*xCompare)(void*,int,const void*,int,const void*)
);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation_v2(
+SQLITE_API int sqlite3_create_collation_v2(
sqlite3*,
const char *zName,
int eTextRep,
int(*xCompare)(void*,int,const void*,int,const void*),
void(*xDestroy)(void*)
);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation16(
+SQLITE_API int sqlite3_create_collation16(
sqlite3*,
const void *zName,
int eTextRep,
** [sqlite3_create_collation()], [sqlite3_create_collation16()], or
** [sqlite3_create_collation_v2()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed(
+SQLITE_API int sqlite3_collation_needed(
sqlite3*,
void*,
void(*)(void*,sqlite3*,int eTextRep,const char*)
);
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed16(
+SQLITE_API int sqlite3_collation_needed16(
sqlite3*,
void*,
void(*)(void*,sqlite3*,int eTextRep,const void*)
** The code to implement this API is not available in the public release
** of SQLite.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_key(
+SQLITE_API int sqlite3_key(
sqlite3 *db, /* Database to be rekeyed */
const void *pKey, int nKey /* The key */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_key_v2(
+SQLITE_API int sqlite3_key_v2(
sqlite3 *db, /* Database to be rekeyed */
const char *zDbName, /* Name of the database */
const void *pKey, int nKey /* The key */
** The code to implement this API is not available in the public release
** of SQLite.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey(
+SQLITE_API int sqlite3_rekey(
sqlite3 *db, /* Database to be rekeyed */
const void *pKey, int nKey /* The new key */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey_v2(
+SQLITE_API int sqlite3_rekey_v2(
sqlite3 *db, /* Database to be rekeyed */
const char *zDbName, /* Name of the database */
const void *pKey, int nKey /* The new key */
** Specify the activation key for a SEE database. Unless
** activated, none of the SEE routines will work.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_see(
+SQLITE_API void sqlite3_activate_see(
const char *zPassPhrase /* Activation phrase */
);
#endif
** Specify the activation key for a CEROD database. Unless
** activated, none of the CEROD routines will work.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_cerod(
+SQLITE_API void sqlite3_activate_cerod(
const char *zPassPhrase /* Activation phrase */
);
#endif
** all, then the behavior of sqlite3_sleep() may deviate from the description
** in the previous paragraphs.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_sleep(int);
+SQLITE_API int sqlite3_sleep(int);
/*
** CAPI3REF: Name Of The Folder Holding Temporary Files
** connection while this routine is running, then the return value
** is undefined.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_get_autocommit(sqlite3*);
+SQLITE_API int sqlite3_get_autocommit(sqlite3*);
/*
** CAPI3REF: Find The Database Handle Of A Prepared Statement
** to the [sqlite3_prepare_v2()] call (or its variants) that was used to
** create the statement in the first place.
*/
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_db_handle(sqlite3_stmt*);
+SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
/*
** CAPI3REF: Return The Filename For A Database Connection
** will be an absolute pathname, even if the filename used
** to open the database originally was a URI or relative pathname.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_db_filename(sqlite3 *db, const char *zDbName);
+SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName);
/*
** CAPI3REF: Determine if a database is read-only
** of connection D is read-only, 0 if it is read/write, or -1 if N is not
** the name of a database on connection D.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
+SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
/*
** CAPI3REF: Find the next prepared statement
** [sqlite3_next_stmt(D,S)] must refer to an open database
** connection and in particular must not be a NULL pointer.
*/
-SQLITE_API sqlite3_stmt *SQLITE_STDCALL sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
+SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
/*
** CAPI3REF: Commit And Rollback Notification Callbacks
**
** See also the [sqlite3_update_hook()] interface.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
-SQLITE_API void *SQLITE_STDCALL sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
+SQLITE_API void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
+SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
/*
** CAPI3REF: Data Change Notification Callbacks
** ^The sqlite3_update_hook() interface registers a callback function
** with the [database connection] identified by the first argument
** to be invoked whenever a row is updated, inserted or deleted in
-** a rowid table.
+** a [rowid table].
** ^Any callback set by a previous call to this function
** for the same database connection is overridden.
**
** on the same [database connection] D, or NULL for
** the first call on D.
**
-** See also the [sqlite3_commit_hook()] and [sqlite3_rollback_hook()]
-** interfaces.
+** See also the [sqlite3_commit_hook()], [sqlite3_rollback_hook()],
+** and [sqlite3_preupdate_hook()] interfaces.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_update_hook(
+SQLITE_API void *sqlite3_update_hook(
sqlite3*,
void(*)(void *,int ,char const *,char const *,sqlite3_int64),
void*
** and disabled if the argument is false.)^
**
** ^Cache sharing is enabled and disabled for an entire process.
-** This is a change as of SQLite version 3.5.0. In prior versions of SQLite,
+** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]).
+** In prior versions of SQLite,
** sharing was enabled or disabled for each thread separately.
**
** ^(The cache sharing mode set by this interface effects all subsequent
**
** See Also: [SQLite Shared-Cache Mode]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_shared_cache(int);
+SQLITE_API int sqlite3_enable_shared_cache(int);
/*
** CAPI3REF: Attempt To Free Heap Memory
**
** See also: [sqlite3_db_release_memory()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_release_memory(int);
+SQLITE_API int sqlite3_release_memory(int);
/*
** CAPI3REF: Free Memory Used By A Database Connection
**
** See also: [sqlite3_release_memory()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_release_memory(sqlite3*);
+SQLITE_API int sqlite3_db_release_memory(sqlite3*);
/*
** CAPI3REF: Impose A Limit On Heap Size
** from the heap.
** </ul>)^
**
-** Beginning with SQLite version 3.7.3, the soft heap limit is enforced
+** Beginning with SQLite [version 3.7.3] ([dateof:3.7.3]),
+** the soft heap limit is enforced
** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
** compile-time option is invoked. With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
** the soft heap limit is enforced on every memory allocation. Without
** The circumstances under which SQLite will enforce the soft heap limit may
** changes in future releases of SQLite.
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_soft_heap_limit64(sqlite3_int64 N);
+SQLITE_API sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 N);
/*
** CAPI3REF: Deprecated Soft Heap Limit Interface
** only. All new applications should use the
** [sqlite3_soft_heap_limit64()] interface rather than this one.
*/
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_soft_heap_limit(int N);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_limit(int N);
/*
** column exists. ^The sqlite3_table_column_metadata() interface returns
** SQLITE_ERROR and if the specified column does not exist.
** ^If the column-name parameter to sqlite3_table_column_metadata() is a
-** NULL pointer, then this routine simply checks for the existance of the
+** NULL pointer, then this routine simply checks for the existence of the
** table and returns SQLITE_OK if the table exists and SQLITE_ERROR if it
** does not.
**
** parsed, if that has not already been done, and returns an error if
** any errors are encountered while loading the schema.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_table_column_metadata(
+SQLITE_API int sqlite3_table_column_metadata(
sqlite3 *db, /* Connection handle */
const char *zDbName, /* Database name or NULL */
const char *zTableName, /* Table name */
** should free this memory by calling [sqlite3_free()].
**
** ^Extension loading must be enabled using
-** [sqlite3_enable_load_extension()] prior to calling this API,
+** [sqlite3_enable_load_extension()] or
+** [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],1,NULL)
+** prior to calling this API,
** otherwise an error will be returned.
**
+** <b>Security warning:</b> It is recommended that the
+** [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method be used to enable only this
+** interface. The use of the [sqlite3_enable_load_extension()] interface
+** should be avoided. This will keep the SQL function [load_extension()]
+** disabled and prevent SQL injections from giving attackers
+** access to extension loading capabilities.
+**
** See also the [load_extension() SQL function].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_load_extension(
+SQLITE_API int sqlite3_load_extension(
sqlite3 *db, /* Load the extension into this database connection */
const char *zFile, /* Name of the shared library containing extension */
const char *zProc, /* Entry point. Derived from zFile if 0 */
** ^Call the sqlite3_enable_load_extension() routine with onoff==1
** to turn extension loading on and call it with onoff==0 to turn
** it back off again.
+**
+** ^This interface enables or disables both the C-API
+** [sqlite3_load_extension()] and the SQL function [load_extension()].
+** ^(Use [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],..)
+** to enable or disable only the C-API.)^
+**
+** <b>Security warning:</b> It is recommended that extension loading
+** be disabled using the [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method
+** rather than this interface, so the [load_extension()] SQL function
+** remains disabled. This will prevent SQL injections from giving attackers
+** access to extension loading capabilities.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_load_extension(sqlite3 *db, int onoff);
+SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
/*
** CAPI3REF: Automatically Load Statically Linked Extensions
**
** ^(Even though the function prototype shows that xEntryPoint() takes
** no arguments and returns void, SQLite invokes xEntryPoint() with three
-** arguments and expects and integer result as if the signature of the
+** arguments and expects an integer result as if the signature of the
** entry point where as follows:
**
** <blockquote><pre>
** See also: [sqlite3_reset_auto_extension()]
** and [sqlite3_cancel_auto_extension()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_auto_extension(void (*xEntryPoint)(void));
+SQLITE_API int sqlite3_auto_extension(void(*xEntryPoint)(void));
/*
** CAPI3REF: Cancel Automatic Extension Loading
** unregistered and it returns 0 if X was not on the list of initialization
** routines.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_cancel_auto_extension(void (*xEntryPoint)(void));
+SQLITE_API int sqlite3_cancel_auto_extension(void(*xEntryPoint)(void));
/*
** CAPI3REF: Reset Automatic Extension Loading
** ^This interface disables all automatic extensions previously
** registered using [sqlite3_auto_extension()].
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_reset_auto_extension(void);
+SQLITE_API void sqlite3_reset_auto_extension(void);
/*
** The interface to the virtual-table mechanism is currently considered
** the xUpdate method are automatically rolled back by SQLite.
**
** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
-** structure for SQLite version 3.8.2. If a virtual table extension is
+** structure for SQLite [version 3.8.2] ([dateof:3.8.2]).
+** If a virtual table extension is
** used with an SQLite version earlier than 3.8.2, the results of attempting
** to read or write the estimatedRows field are undefined (but are likely
** to included crashing the application). The estimatedRows field should
** therefore only be used if [sqlite3_libversion_number()] returns a
** value greater than or equal to 3008002. Similarly, the idxFlags field
-** was added for version 3.9.0. It may therefore only be used if
+** was added for [version 3.9.0] ([dateof:3.9.0]).
+** It may therefore only be used if
** sqlite3_libversion_number() returns a value greater than or equal to
** 3009000.
*/
** interface is equivalent to sqlite3_create_module_v2() with a NULL
** destructor.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module(
+SQLITE_API int sqlite3_create_module(
sqlite3 *db, /* SQLite connection to register module with */
const char *zName, /* Name of the module */
const sqlite3_module *p, /* Methods for the module */
void *pClientData /* Client data for xCreate/xConnect */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module_v2(
+SQLITE_API int sqlite3_create_module_v2(
sqlite3 *db, /* SQLite connection to register module with */
const char *zName, /* Name of the module */
const sqlite3_module *p, /* Methods for the module */
** to declare the format (the names and datatypes of the columns) of
** the virtual tables they implement.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_declare_vtab(sqlite3*, const char *zSQL);
+SQLITE_API int sqlite3_declare_vtab(sqlite3*, const char *zSQL);
/*
** CAPI3REF: Overload A Function For A Virtual Table
** purpose is to be a placeholder function that can be overloaded
** by a [virtual table].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
+SQLITE_API int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
/*
** The interface to the virtual-table mechanism defined above (back up
** To avoid a resource leak, every open [BLOB handle] should eventually
** be released by a call to [sqlite3_blob_close()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_open(
+SQLITE_API int sqlite3_blob_open(
sqlite3*,
const char *zDb,
const char *zTable,
**
** ^This function sets the database handle error code and message.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
+SQLITE_API int sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
/*
** CAPI3REF: Close A BLOB Handle
** is passed a valid open blob handle, the values returned by the
** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_close(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_close(sqlite3_blob *);
/*
** CAPI3REF: Return The Size Of An Open BLOB
** been closed by [sqlite3_blob_close()]. Passing any other pointer in
** to this routine results in undefined and probably undesirable behavior.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_bytes(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *);
/*
** CAPI3REF: Read Data From A BLOB Incrementally
**
** See also: [sqlite3_blob_write()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
+SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
/*
** CAPI3REF: Write Data Into A BLOB Incrementally
**
** See also: [sqlite3_blob_read()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
+SQLITE_API int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
/*
** CAPI3REF: Virtual File System Objects
** ^(If the default VFS is unregistered, another VFS is chosen as
** the default. The choice for the new VFS is arbitrary.)^
*/
-SQLITE_API sqlite3_vfs *SQLITE_STDCALL sqlite3_vfs_find(const char *zVfsName);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs*);
+SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName);
+SQLITE_API int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
+SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
/*
** CAPI3REF: Mutexes
**
** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()].
*/
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_mutex_alloc(int);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_free(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_enter(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_try(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_leave(sqlite3_mutex*);
+SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int);
+SQLITE_API void sqlite3_mutex_free(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_try(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
/*
** CAPI3REF: Mutex Methods Object
** interface should also return 1 when given a NULL pointer.
*/
#ifndef NDEBUG
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_held(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_held(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
#endif
/*
#define SQLITE_MUTEX_STATIC_MEM 3 /* sqlite3_malloc() */
#define SQLITE_MUTEX_STATIC_MEM2 4 /* NOT USED */
#define SQLITE_MUTEX_STATIC_OPEN 4 /* sqlite3BtreeOpen() */
-#define SQLITE_MUTEX_STATIC_PRNG 5 /* sqlite3_random() */
+#define SQLITE_MUTEX_STATIC_PRNG 5 /* sqlite3_randomness() */
#define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */
#define SQLITE_MUTEX_STATIC_LRU2 7 /* NOT USED */
#define SQLITE_MUTEX_STATIC_PMEM 7 /* sqlite3PageMalloc() */
** ^If the [threading mode] is Single-thread or Multi-thread then this
** routine returns a NULL pointer.
*/
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_db_mutex(sqlite3*);
+SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
/*
** CAPI3REF: Low-Level Control Of Database Files
**
** See also: [SQLITE_FCNTL_LOCKSTATE]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
+SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
/*
** CAPI3REF: Testing Interface
** Unlike most of the SQLite API, this function is not guaranteed to
** operate consistently from one release to the next.
*/
-SQLITE_API int SQLITE_CDECL sqlite3_test_control(int op, ...);
+SQLITE_API int sqlite3_test_control(int op, ...);
/*
** CAPI3REF: Testing Interface Operation Codes
#define SQLITE_TESTCTRL_SCRATCHMALLOC 17
#define SQLITE_TESTCTRL_LOCALTIME_FAULT 18
#define SQLITE_TESTCTRL_EXPLAIN_STMT 19 /* NOT USED */
+#define SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD 19
#define SQLITE_TESTCTRL_NEVER_CORRUPT 20
#define SQLITE_TESTCTRL_VDBE_COVERAGE 21
#define SQLITE_TESTCTRL_BYTEORDER 22
**
** See also: [sqlite3_db_status()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
-SQLITE_API int SQLITE_STDCALL sqlite3_status64(
+SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
+SQLITE_API int sqlite3_status64(
int op,
sqlite3_int64 *pCurrent,
sqlite3_int64 *pHighwater,
**
** See also: [sqlite3_status()] and [sqlite3_stmt_status()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
+SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
/*
** CAPI3REF: Status Parameters for database connections
** memory used by all pager caches associated with the database connection.)^
** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.
**
+** [[SQLITE_DBSTATUS_CACHE_USED_SHARED]]
+** ^(<dt>SQLITE_DBSTATUS_CACHE_USED_SHARED</dt>
+** <dd>This parameter is similar to DBSTATUS_CACHE_USED, except that if a
+** pager cache is shared between two or more connections the bytes of heap
+** memory used by that pager cache is divided evenly between the attached
+** connections.)^ In other words, if none of the pager caches associated
+** with the database connection are shared, this request returns the same
+** value as DBSTATUS_CACHE_USED. Or, if one or more or the pager caches are
+** shared, the value returned by this call will be smaller than that returned
+** by DBSTATUS_CACHE_USED. ^The highwater mark associated with
+** SQLITE_DBSTATUS_CACHE_USED_SHARED is always 0.
+**
** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt>
** <dd>This parameter returns the approximate number of bytes of heap
** memory used to store the schema for all databases associated
#define SQLITE_DBSTATUS_CACHE_MISS 8
#define SQLITE_DBSTATUS_CACHE_WRITE 9
#define SQLITE_DBSTATUS_DEFERRED_FKS 10
-#define SQLITE_DBSTATUS_MAX 10 /* Largest defined DBSTATUS */
+#define SQLITE_DBSTATUS_CACHE_USED_SHARED 11
+#define SQLITE_DBSTATUS_MAX 11 /* Largest defined DBSTATUS */
/*
**
** See also: [sqlite3_status()] and [sqlite3_db_status()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
+SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
/*
** CAPI3REF: Status Parameters for prepared statements
** must be different or else sqlite3_backup_init(D,N,S,M) will fail with
** an error.
**
-** ^A call to sqlite3_backup_init() will fail, returning SQLITE_ERROR, if
+** ^A call to sqlite3_backup_init() will fail, returning NULL, if
** there is already a read or read-write transaction open on the
** destination database.
**
** same time as another thread is invoking sqlite3_backup_step() it is
** possible that they return invalid values.
*/
-SQLITE_API sqlite3_backup *SQLITE_STDCALL sqlite3_backup_init(
+SQLITE_API sqlite3_backup *sqlite3_backup_init(
sqlite3 *pDest, /* Destination database handle */
const char *zDestName, /* Destination database name */
sqlite3 *pSource, /* Source database handle */
const char *zSourceName /* Source database name */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_step(sqlite3_backup *p, int nPage);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_finish(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_remaining(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_pagecount(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_step(sqlite3_backup *p, int nPage);
+SQLITE_API int sqlite3_backup_finish(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p);
/*
** CAPI3REF: Unlock Notification
** the special "DROP TABLE/INDEX" case, the extended error code is just
** SQLITE_LOCKED.)^
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_unlock_notify(
+SQLITE_API int sqlite3_unlock_notify(
sqlite3 *pBlocked, /* Waiting connection */
void (*xNotify)(void **apArg, int nArg), /* Callback function to invoke */
void *pNotifyArg /* Argument to pass to xNotify */
** strings in a case-independent fashion, using the same definition of "case
** independence" that SQLite uses internally when comparing identifiers.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stricmp(const char *, const char *);
-SQLITE_API int SQLITE_STDCALL sqlite3_strnicmp(const char *, const char *, int);
+SQLITE_API int sqlite3_stricmp(const char *, const char *);
+SQLITE_API int sqlite3_strnicmp(const char *, const char *, int);
/*
** CAPI3REF: String Globbing
**
** See also: [sqlite3_strlike()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_strglob(const char *zGlob, const char *zStr);
+SQLITE_API int sqlite3_strglob(const char *zGlob, const char *zStr);
/*
** CAPI3REF: String LIKE Matching
**
** See also: [sqlite3_strglob()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
+SQLITE_API int sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
/*
** CAPI3REF: Error Logging Interface
** a few hundred characters, it will be truncated to the length of the
** buffer.
*/
-SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...);
+SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...);
/*
** CAPI3REF: Write-Ahead Log Commit Hook
** previously registered write-ahead log callback. ^Note that the
** [sqlite3_wal_autocheckpoint()] interface and the
** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will
-** those overwrite any prior [sqlite3_wal_hook()] settings.
+** overwrite any prior [sqlite3_wal_hook()] settings.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_wal_hook(
+SQLITE_API void *sqlite3_wal_hook(
sqlite3*,
int(*)(void *,sqlite3*,const char*,int),
void*
** is only necessary if the default setting is found to be suboptimal
** for a particular application.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
+SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
/*
** CAPI3REF: Checkpoint a database
** start a callback but which do not need the full power (and corresponding
** complication) of [sqlite3_wal_checkpoint_v2()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
+SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
/*
** CAPI3REF: Checkpoint a database
** ^The [PRAGMA wal_checkpoint] command can be used to invoke this interface
** from SQL.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint_v2(
+SQLITE_API int sqlite3_wal_checkpoint_v2(
sqlite3 *db, /* Database handle */
const char *zDb, /* Name of attached database (or NULL) */
int eMode, /* SQLITE_CHECKPOINT_* value */
** this function. (See [SQLITE_VTAB_CONSTRAINT_SUPPORT].) Further options
** may be added in the future.
*/
-SQLITE_API int SQLITE_CDECL sqlite3_vtab_config(sqlite3*, int op, ...);
+SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...);
/*
** CAPI3REF: Virtual Table Configuration Options
** of the SQL statement that triggered the call to the [xUpdate] method of the
** [virtual table].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_vtab_on_conflict(sqlite3 *);
+SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
/*
** CAPI3REF: Conflict resolution modes
**
** See also: [sqlite3_stmt_scanstatus_reset()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_scanstatus(
+SQLITE_API int sqlite3_stmt_scanstatus(
sqlite3_stmt *pStmt, /* Prepared statement for which info desired */
int idx, /* Index of loop to report on */
int iScanStatusOp, /* Information desired. SQLITE_SCANSTAT_* */
** This API is only available if the library is built with pre-processor
** symbol [SQLITE_ENABLE_STMT_SCANSTATUS] defined.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
+SQLITE_API void sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
/*
** CAPI3REF: Flush caches to disk mid-transaction
** ^This function does not set the database handle error code or message
** returned by the [sqlite3_errcode()] and [sqlite3_errmsg()] functions.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_cacheflush(sqlite3*);
+SQLITE_API int sqlite3_db_cacheflush(sqlite3*);
+
+/*
+** CAPI3REF: The pre-update hook.
+**
+** ^These interfaces are only available if SQLite is compiled using the
+** [SQLITE_ENABLE_PREUPDATE_HOOK] compile-time option.
+**
+** ^The [sqlite3_preupdate_hook()] interface registers a callback function
+** that is invoked prior to each [INSERT], [UPDATE], and [DELETE] operation
+** on a [rowid table].
+** ^At most one preupdate hook may be registered at a time on a single
+** [database connection]; each call to [sqlite3_preupdate_hook()] overrides
+** the previous setting.
+** ^The preupdate hook is disabled by invoking [sqlite3_preupdate_hook()]
+** with a NULL pointer as the second parameter.
+** ^The third parameter to [sqlite3_preupdate_hook()] is passed through as
+** the first parameter to callbacks.
+**
+** ^The preupdate hook only fires for changes to [rowid tables]; the preupdate
+** hook is not invoked for changes to [virtual tables] or [WITHOUT ROWID]
+** tables.
+**
+** ^The second parameter to the preupdate callback is a pointer to
+** the [database connection] that registered the preupdate hook.
+** ^The third parameter to the preupdate callback is one of the constants
+** [SQLITE_INSERT], [SQLITE_DELETE], or [SQLITE_UPDATE] to identify the
+** kind of update operation that is about to occur.
+** ^(The fourth parameter to the preupdate callback is the name of the
+** database within the database connection that is being modified. This
+** will be "main" for the main database or "temp" for TEMP tables or
+** the name given after the AS keyword in the [ATTACH] statement for attached
+** databases.)^
+** ^The fifth parameter to the preupdate callback is the name of the
+** table that is being modified.
+** ^The sixth parameter to the preupdate callback is the initial [rowid] of the
+** row being changes for SQLITE_UPDATE and SQLITE_DELETE changes and is
+** undefined for SQLITE_INSERT changes.
+** ^The seventh parameter to the preupdate callback is the final [rowid] of
+** the row being changed for SQLITE_UPDATE and SQLITE_INSERT changes and is
+** undefined for SQLITE_DELETE changes.
+**
+** The [sqlite3_preupdate_old()], [sqlite3_preupdate_new()],
+** [sqlite3_preupdate_count()], and [sqlite3_preupdate_depth()] interfaces
+** provide additional information about a preupdate event. These routines
+** may only be called from within a preupdate callback. Invoking any of
+** these routines from outside of a preupdate callback or with a
+** [database connection] pointer that is different from the one supplied
+** to the preupdate callback results in undefined and probably undesirable
+** behavior.
+**
+** ^The [sqlite3_preupdate_count(D)] interface returns the number of columns
+** in the row that is being inserted, updated, or deleted.
+**
+** ^The [sqlite3_preupdate_old(D,N,P)] interface writes into P a pointer to
+** a [protected sqlite3_value] that contains the value of the Nth column of
+** the table row before it is updated. The N parameter must be between 0
+** and one less than the number of columns or the behavior will be
+** undefined. This must only be used within SQLITE_UPDATE and SQLITE_DELETE
+** preupdate callbacks; if it is used by an SQLITE_INSERT callback then the
+** behavior is undefined. The [sqlite3_value] that P points to
+** will be destroyed when the preupdate callback returns.
+**
+** ^The [sqlite3_preupdate_new(D,N,P)] interface writes into P a pointer to
+** a [protected sqlite3_value] that contains the value of the Nth column of
+** the table row after it is updated. The N parameter must be between 0
+** and one less than the number of columns or the behavior will be
+** undefined. This must only be used within SQLITE_INSERT and SQLITE_UPDATE
+** preupdate callbacks; if it is used by an SQLITE_DELETE callback then the
+** behavior is undefined. The [sqlite3_value] that P points to
+** will be destroyed when the preupdate callback returns.
+**
+** ^The [sqlite3_preupdate_depth(D)] interface returns 0 if the preupdate
+** callback was invoked as a result of a direct insert, update, or delete
+** operation; or 1 for inserts, updates, or deletes invoked by top-level
+** triggers; or 2 for changes resulting from triggers called by top-level
+** triggers; and so forth.
+**
+** See also: [sqlite3_update_hook()]
+*/
+SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_preupdate_hook(
+ sqlite3 *db,
+ void(*xPreUpdate)(
+ void *pCtx, /* Copy of third arg to preupdate_hook() */
+ sqlite3 *db, /* Database handle */
+ int op, /* SQLITE_UPDATE, DELETE or INSERT */
+ char const *zDb, /* Database name */
+ char const *zName, /* Table name */
+ sqlite3_int64 iKey1, /* Rowid of row about to be deleted/updated */
+ sqlite3_int64 iKey2 /* New rowid value (for a rowid UPDATE) */
+ ),
+ void*
+);
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **);
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_count(sqlite3 *);
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_depth(sqlite3 *);
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **);
+
+/*
+** CAPI3REF: Low-level system error code
+**
+** ^Attempt to return the underlying operating system error code or error
+** number that caused the most recent I/O error or failure to open a file.
+** The return value is OS-dependent. For example, on unix systems, after
+** [sqlite3_open_v2()] returns [SQLITE_CANTOPEN], this interface could be
+** called to get back the underlying "errno" that caused the problem, such
+** as ENOSPC, EAUTH, EISDIR, and so forth.
+*/
+SQLITE_API int sqlite3_system_errno(sqlite3*);
/*
** CAPI3REF: Database Snapshot
** The [sqlite3_snapshot_get()] interface is only available when the
** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
*/
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_get(
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get(
sqlite3 *db,
const char *zSchema,
sqlite3_snapshot **ppSnapshot
** CAPI3REF: Start a read transaction on an historical snapshot
** EXPERIMENTAL
**
-** ^The [sqlite3_snapshot_open(D,S,P)] interface attempts to move the
-** read transaction that is currently open on schema S of
-** [database connection] D so that it refers to historical [snapshot] P.
+** ^The [sqlite3_snapshot_open(D,S,P)] interface starts a
+** read transaction for schema S of
+** [database connection] D such that the read transaction
+** refers to historical [snapshot] P, rather than the most
+** recent change to the database.
** ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK on success
** or an appropriate [error code] if it fails.
**
** ^In order to succeed, a call to [sqlite3_snapshot_open(D,S,P)] must be
-** the first operation, apart from other sqlite3_snapshot_open() calls,
-** following the [BEGIN] that starts a new read transaction.
-** ^A [snapshot] will fail to open if it has been overwritten by a
-** [checkpoint].
+** the first operation following the [BEGIN] that takes the schema S
+** out of [autocommit mode].
+** ^In other words, schema S must not currently be in
+** a transaction for [sqlite3_snapshot_open(D,S,P)] to work, but the
+** database connection D must be out of [autocommit mode].
+** ^A [snapshot] will fail to open if it has been overwritten by a
+** [checkpoint].
+** ^(A call to [sqlite3_snapshot_open(D,S,P)] will fail if the
+** database connection D does not know that the database file for
+** schema S is in [WAL mode]. A database connection might not know
+** that the database file is in [WAL mode] if there has been no prior
+** I/O on that database connection, or if the database entered [WAL mode]
+** after the most recent I/O on the database connection.)^
+** (Hint: Run "[PRAGMA application_id]" against a newly opened
+** database connection in order to make it ready to use snapshots.)
**
** The [sqlite3_snapshot_open()] interface is only available when the
** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
*/
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_open(
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open(
sqlite3 *db,
const char *zSchema,
sqlite3_snapshot *pSnapshot
** The [sqlite3_snapshot_free()] interface is only available when the
** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
*/
-SQLITE_API SQLITE_EXPERIMENTAL void SQLITE_STDCALL sqlite3_snapshot_free(sqlite3_snapshot*);
+SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_snapshot_free(sqlite3_snapshot*);
+
+/*
+** CAPI3REF: Compare the ages of two snapshot handles.
+** EXPERIMENTAL
+**
+** The sqlite3_snapshot_cmp(P1, P2) interface is used to compare the ages
+** of two valid snapshot handles.
+**
+** If the two snapshot handles are not associated with the same database
+** file, the result of the comparison is undefined.
+**
+** Additionally, the result of the comparison is only valid if both of the
+** snapshot handles were obtained by calling sqlite3_snapshot_get() since the
+** last time the wal file was deleted. The wal file is deleted when the
+** database is changed back to rollback mode or when the number of database
+** clients drops to zero. If either snapshot handle was obtained before the
+** wal file was last deleted, the value returned by this function
+** is undefined.
+**
+** Otherwise, this API returns a negative value if P1 refers to an older
+** snapshot than P2, zero if the two handles refer to the same database
+** snapshot, and a positive value if P1 is a newer snapshot than P2.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp(
+ sqlite3_snapshot *p1,
+ sqlite3_snapshot *p2
+);
/*
** Undo the hack that converts floating point types to integer for
#if 0
} /* End of the 'extern "C"' block */
#endif
-#endif /* _SQLITE3_H_ */
+#endif /* SQLITE3_H */
+/******** Begin file sqlite3rtree.h *********/
/*
** 2010 August 30
**
**
** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zGeom(... params ...)
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_geometry_callback(
+SQLITE_API int sqlite3_rtree_geometry_callback(
sqlite3 *db,
const char *zGeom,
int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*),
**
** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...)
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_query_callback(
+SQLITE_API int sqlite3_rtree_query_callback(
sqlite3 *db,
const char *zQueryFunc,
int (*xQueryFunc)(sqlite3_rtree_query_info*),
#endif /* ifndef _SQLITE3RTREE_H_ */
+/******** End of sqlite3rtree.h *********/
+/******** Begin file sqlite3session.h *********/
+
+#if !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION)
+#define __SQLITESESSION_H_ 1
+
+/*
+** Make sure we can call this stuff from C++.
+*/
+#if 0
+extern "C" {
+#endif
+
+
+/*
+** CAPI3REF: Session Object Handle
+*/
+typedef struct sqlite3_session sqlite3_session;
+
+/*
+** CAPI3REF: Changeset Iterator Handle
+*/
+typedef struct sqlite3_changeset_iter sqlite3_changeset_iter;
+
+/*
+** CAPI3REF: Create A New Session Object
+**
+** Create a new session object attached to database handle db. If successful,
+** a pointer to the new object is written to *ppSession and SQLITE_OK is
+** returned. If an error occurs, *ppSession is set to NULL and an SQLite
+** error code (e.g. SQLITE_NOMEM) is returned.
+**
+** It is possible to create multiple session objects attached to a single
+** database handle.
+**
+** Session objects created using this function should be deleted using the
+** [sqlite3session_delete()] function before the database handle that they
+** are attached to is itself closed. If the database handle is closed before
+** the session object is deleted, then the results of calling any session
+** module function, including [sqlite3session_delete()] on the session object
+** are undefined.
+**
+** Because the session module uses the [sqlite3_preupdate_hook()] API, it
+** is not possible for an application to register a pre-update hook on a
+** database handle that has one or more session objects attached. Nor is
+** it possible to create a session object attached to a database handle for
+** which a pre-update hook is already defined. The results of attempting
+** either of these things are undefined.
+**
+** The session object will be used to create changesets for tables in
+** database zDb, where zDb is either "main", or "temp", or the name of an
+** attached database. It is not an error if database zDb is not attached
+** to the database when the session object is created.
+*/
+int sqlite3session_create(
+ sqlite3 *db, /* Database handle */
+ const char *zDb, /* Name of db (e.g. "main") */
+ sqlite3_session **ppSession /* OUT: New session object */
+);
+
+/*
+** CAPI3REF: Delete A Session Object
+**
+** Delete a session object previously allocated using
+** [sqlite3session_create()]. Once a session object has been deleted, the
+** results of attempting to use pSession with any other session module
+** function are undefined.
+**
+** Session objects must be deleted before the database handle to which they
+** are attached is closed. Refer to the documentation for
+** [sqlite3session_create()] for details.
+*/
+void sqlite3session_delete(sqlite3_session *pSession);
+
+
+/*
+** CAPI3REF: Enable Or Disable A Session Object
+**
+** Enable or disable the recording of changes by a session object. When
+** enabled, a session object records changes made to the database. When
+** disabled - it does not. A newly created session object is enabled.
+** Refer to the documentation for [sqlite3session_changeset()] for further
+** details regarding how enabling and disabling a session object affects
+** the eventual changesets.
+**
+** Passing zero to this function disables the session. Passing a value
+** greater than zero enables it. Passing a value less than zero is a
+** no-op, and may be used to query the current state of the session.
+**
+** The return value indicates the final state of the session object: 0 if
+** the session is disabled, or 1 if it is enabled.
+*/
+int sqlite3session_enable(sqlite3_session *pSession, int bEnable);
+
+/*
+** CAPI3REF: Set Or Clear the Indirect Change Flag
+**
+** Each change recorded by a session object is marked as either direct or
+** indirect. A change is marked as indirect if either:
+**
+** <ul>
+** <li> The session object "indirect" flag is set when the change is
+** made, or
+** <li> The change is made by an SQL trigger or foreign key action
+** instead of directly as a result of a users SQL statement.
+** </ul>
+**
+** If a single row is affected by more than one operation within a session,
+** then the change is considered indirect if all operations meet the criteria
+** for an indirect change above, or direct otherwise.
+**
+** This function is used to set, clear or query the session object indirect
+** flag. If the second argument passed to this function is zero, then the
+** indirect flag is cleared. If it is greater than zero, the indirect flag
+** is set. Passing a value less than zero does not modify the current value
+** of the indirect flag, and may be used to query the current state of the
+** indirect flag for the specified session object.
+**
+** The return value indicates the final state of the indirect flag: 0 if
+** it is clear, or 1 if it is set.
+*/
+int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect);
+
+/*
+** CAPI3REF: Attach A Table To A Session Object
+**
+** If argument zTab is not NULL, then it is the name of a table to attach
+** to the session object passed as the first argument. All subsequent changes
+** made to the table while the session object is enabled will be recorded. See
+** documentation for [sqlite3session_changeset()] for further details.
+**
+** Or, if argument zTab is NULL, then changes are recorded for all tables
+** in the database. If additional tables are added to the database (by
+** executing "CREATE TABLE" statements) after this call is made, changes for
+** the new tables are also recorded.
+**
+** Changes can only be recorded for tables that have a PRIMARY KEY explicitly
+** defined as part of their CREATE TABLE statement. It does not matter if the
+** PRIMARY KEY is an "INTEGER PRIMARY KEY" (rowid alias) or not. The PRIMARY
+** KEY may consist of a single column, or may be a composite key.
+**
+** It is not an error if the named table does not exist in the database. Nor
+** is it an error if the named table does not have a PRIMARY KEY. However,
+** no changes will be recorded in either of these scenarios.
+**
+** Changes are not recorded for individual rows that have NULL values stored
+** in one or more of their PRIMARY KEY columns.
+**
+** SQLITE_OK is returned if the call completes without error. Or, if an error
+** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned.
+*/
+int sqlite3session_attach(
+ sqlite3_session *pSession, /* Session object */
+ const char *zTab /* Table name */
+);
+
+/*
+** CAPI3REF: Set a table filter on a Session Object.
+**
+** The second argument (xFilter) is the "filter callback". For changes to rows
+** in tables that are not attached to the Session object, the filter is called
+** to determine whether changes to the table's rows should be tracked or not.
+** If xFilter returns 0, changes is not tracked. Note that once a table is
+** attached, xFilter will not be called again.
+*/
+void sqlite3session_table_filter(
+ sqlite3_session *pSession, /* Session object */
+ int(*xFilter)(
+ void *pCtx, /* Copy of third arg to _filter_table() */
+ const char *zTab /* Table name */
+ ),
+ void *pCtx /* First argument passed to xFilter */
+);
+
+/*
+** CAPI3REF: Generate A Changeset From A Session Object
+**
+** Obtain a changeset containing changes to the tables attached to the
+** session object passed as the first argument. If successful,
+** set *ppChangeset to point to a buffer containing the changeset
+** and *pnChangeset to the size of the changeset in bytes before returning
+** SQLITE_OK. If an error occurs, set both *ppChangeset and *pnChangeset to
+** zero and return an SQLite error code.
+**
+** A changeset consists of zero or more INSERT, UPDATE and/or DELETE changes,
+** each representing a change to a single row of an attached table. An INSERT
+** change contains the values of each field of a new database row. A DELETE
+** contains the original values of each field of a deleted database row. An
+** UPDATE change contains the original values of each field of an updated
+** database row along with the updated values for each updated non-primary-key
+** column. It is not possible for an UPDATE change to represent a change that
+** modifies the values of primary key columns. If such a change is made, it
+** is represented in a changeset as a DELETE followed by an INSERT.
+**
+** Changes are not recorded for rows that have NULL values stored in one or
+** more of their PRIMARY KEY columns. If such a row is inserted or deleted,
+** no corresponding change is present in the changesets returned by this
+** function. If an existing row with one or more NULL values stored in
+** PRIMARY KEY columns is updated so that all PRIMARY KEY columns are non-NULL,
+** only an INSERT is appears in the changeset. Similarly, if an existing row
+** with non-NULL PRIMARY KEY values is updated so that one or more of its
+** PRIMARY KEY columns are set to NULL, the resulting changeset contains a
+** DELETE change only.
+**
+** The contents of a changeset may be traversed using an iterator created
+** using the [sqlite3changeset_start()] API. A changeset may be applied to
+** a database with a compatible schema using the [sqlite3changeset_apply()]
+** API.
+**
+** Within a changeset generated by this function, all changes related to a
+** single table are grouped together. In other words, when iterating through
+** a changeset or when applying a changeset to a database, all changes related
+** to a single table are processed before moving on to the next table. Tables
+** are sorted in the same order in which they were attached (or auto-attached)
+** to the sqlite3_session object. The order in which the changes related to
+** a single table are stored is undefined.
+**
+** Following a successful call to this function, it is the responsibility of
+** the caller to eventually free the buffer that *ppChangeset points to using
+** [sqlite3_free()].
+**
+** <h3>Changeset Generation</h3>
+**
+** Once a table has been attached to a session object, the session object
+** records the primary key values of all new rows inserted into the table.
+** It also records the original primary key and other column values of any
+** deleted or updated rows. For each unique primary key value, data is only
+** recorded once - the first time a row with said primary key is inserted,
+** updated or deleted in the lifetime of the session.
+**
+** There is one exception to the previous paragraph: when a row is inserted,
+** updated or deleted, if one or more of its primary key columns contain a
+** NULL value, no record of the change is made.
+**
+** The session object therefore accumulates two types of records - those
+** that consist of primary key values only (created when the user inserts
+** a new record) and those that consist of the primary key values and the
+** original values of other table columns (created when the users deletes
+** or updates a record).
+**
+** When this function is called, the requested changeset is created using
+** both the accumulated records and the current contents of the database
+** file. Specifically:
+**
+** <ul>
+** <li> For each record generated by an insert, the database is queried
+** for a row with a matching primary key. If one is found, an INSERT
+** change is added to the changeset. If no such row is found, no change
+** is added to the changeset.
+**
+** <li> For each record generated by an update or delete, the database is
+** queried for a row with a matching primary key. If such a row is
+** found and one or more of the non-primary key fields have been
+** modified from their original values, an UPDATE change is added to
+** the changeset. Or, if no such row is found in the table, a DELETE
+** change is added to the changeset. If there is a row with a matching
+** primary key in the database, but all fields contain their original
+** values, no change is added to the changeset.
+** </ul>
+**
+** This means, amongst other things, that if a row is inserted and then later
+** deleted while a session object is active, neither the insert nor the delete
+** will be present in the changeset. Or if a row is deleted and then later a
+** row with the same primary key values inserted while a session object is
+** active, the resulting changeset will contain an UPDATE change instead of
+** a DELETE and an INSERT.
+**
+** When a session object is disabled (see the [sqlite3session_enable()] API),
+** it does not accumulate records when rows are inserted, updated or deleted.
+** This may appear to have some counter-intuitive effects if a single row
+** is written to more than once during a session. For example, if a row
+** is inserted while a session object is enabled, then later deleted while
+** the same session object is disabled, no INSERT record will appear in the
+** changeset, even though the delete took place while the session was disabled.
+** Or, if one field of a row is updated while a session is disabled, and
+** another field of the same row is updated while the session is enabled, the
+** resulting changeset will contain an UPDATE change that updates both fields.
+*/
+int sqlite3session_changeset(
+ sqlite3_session *pSession, /* Session object */
+ int *pnChangeset, /* OUT: Size of buffer at *ppChangeset */
+ void **ppChangeset /* OUT: Buffer containing changeset */
+);
+
+/*
+** CAPI3REF: Load The Difference Between Tables Into A Session
+**
+** If it is not already attached to the session object passed as the first
+** argument, this function attaches table zTbl in the same manner as the
+** [sqlite3session_attach()] function. If zTbl does not exist, or if it
+** does not have a primary key, this function is a no-op (but does not return
+** an error).
+**
+** Argument zFromDb must be the name of a database ("main", "temp" etc.)
+** attached to the same database handle as the session object that contains
+** a table compatible with the table attached to the session by this function.
+** A table is considered compatible if it:
+**
+** <ul>
+** <li> Has the same name,
+** <li> Has the same set of columns declared in the same order, and
+** <li> Has the same PRIMARY KEY definition.
+** </ul>
+**
+** If the tables are not compatible, SQLITE_SCHEMA is returned. If the tables
+** are compatible but do not have any PRIMARY KEY columns, it is not an error
+** but no changes are added to the session object. As with other session
+** APIs, tables without PRIMARY KEYs are simply ignored.
+**
+** This function adds a set of changes to the session object that could be
+** used to update the table in database zFrom (call this the "from-table")
+** so that its content is the same as the table attached to the session
+** object (call this the "to-table"). Specifically:
+**
+** <ul>
+** <li> For each row (primary key) that exists in the to-table but not in
+** the from-table, an INSERT record is added to the session object.
+**
+** <li> For each row (primary key) that exists in the to-table but not in
+** the from-table, a DELETE record is added to the session object.
+**
+** <li> For each row (primary key) that exists in both tables, but features
+** different in each, an UPDATE record is added to the session.
+** </ul>
+**
+** To clarify, if this function is called and then a changeset constructed
+** using [sqlite3session_changeset()], then after applying that changeset to
+** database zFrom the contents of the two compatible tables would be
+** identical.
+**
+** It an error if database zFrom does not exist or does not contain the
+** required compatible table.
+**
+** If the operation successful, SQLITE_OK is returned. Otherwise, an SQLite
+** error code. In this case, if argument pzErrMsg is not NULL, *pzErrMsg
+** may be set to point to a buffer containing an English language error
+** message. It is the responsibility of the caller to free this buffer using
+** sqlite3_free().
+*/
+int sqlite3session_diff(
+ sqlite3_session *pSession,
+ const char *zFromDb,
+ const char *zTbl,
+ char **pzErrMsg
+);
+
+
+/*
+** CAPI3REF: Generate A Patchset From A Session Object
+**
+** The differences between a patchset and a changeset are that:
+**
+** <ul>
+** <li> DELETE records consist of the primary key fields only. The
+** original values of other fields are omitted.
+** <li> The original values of any modified fields are omitted from
+** UPDATE records.
+** </ul>
+**
+** A patchset blob may be used with up to date versions of all
+** sqlite3changeset_xxx API functions except for sqlite3changeset_invert(),
+** which returns SQLITE_CORRUPT if it is passed a patchset. Similarly,
+** attempting to use a patchset blob with old versions of the
+** sqlite3changeset_xxx APIs also provokes an SQLITE_CORRUPT error.
+**
+** Because the non-primary key "old.*" fields are omitted, no
+** SQLITE_CHANGESET_DATA conflicts can be detected or reported if a patchset
+** is passed to the sqlite3changeset_apply() API. Other conflict types work
+** in the same way as for changesets.
+**
+** Changes within a patchset are ordered in the same way as for changesets
+** generated by the sqlite3session_changeset() function (i.e. all changes for
+** a single table are grouped together, tables appear in the order in which
+** they were attached to the session object).
+*/
+int sqlite3session_patchset(
+ sqlite3_session *pSession, /* Session object */
+ int *pnPatchset, /* OUT: Size of buffer at *ppChangeset */
+ void **ppPatchset /* OUT: Buffer containing changeset */
+);
+
+/*
+** CAPI3REF: Test if a changeset has recorded any changes.
+**
+** Return non-zero if no changes to attached tables have been recorded by
+** the session object passed as the first argument. Otherwise, if one or
+** more changes have been recorded, return zero.
+**
+** Even if this function returns zero, it is possible that calling
+** [sqlite3session_changeset()] on the session handle may still return a
+** changeset that contains no changes. This can happen when a row in
+** an attached table is modified and then later on the original values
+** are restored. However, if this function returns non-zero, then it is
+** guaranteed that a call to sqlite3session_changeset() will return a
+** changeset containing zero changes.
+*/
+int sqlite3session_isempty(sqlite3_session *pSession);
+
+/*
+** CAPI3REF: Create An Iterator To Traverse A Changeset
+**
+** Create an iterator used to iterate through the contents of a changeset.
+** If successful, *pp is set to point to the iterator handle and SQLITE_OK
+** is returned. Otherwise, if an error occurs, *pp is set to zero and an
+** SQLite error code is returned.
+**
+** The following functions can be used to advance and query a changeset
+** iterator created by this function:
+**
+** <ul>
+** <li> [sqlite3changeset_next()]
+** <li> [sqlite3changeset_op()]
+** <li> [sqlite3changeset_new()]
+** <li> [sqlite3changeset_old()]
+** </ul>
+**
+** It is the responsibility of the caller to eventually destroy the iterator
+** by passing it to [sqlite3changeset_finalize()]. The buffer containing the
+** changeset (pChangeset) must remain valid until after the iterator is
+** destroyed.
+**
+** Assuming the changeset blob was created by one of the
+** [sqlite3session_changeset()], [sqlite3changeset_concat()] or
+** [sqlite3changeset_invert()] functions, all changes within the changeset
+** that apply to a single table are grouped together. This means that when
+** an application iterates through a changeset using an iterator created by
+** this function, all changes that relate to a single table are visited
+** consecutively. There is no chance that the iterator will visit a change
+** the applies to table X, then one for table Y, and then later on visit
+** another change for table X.
+*/
+int sqlite3changeset_start(
+ sqlite3_changeset_iter **pp, /* OUT: New changeset iterator handle */
+ int nChangeset, /* Size of changeset blob in bytes */
+ void *pChangeset /* Pointer to blob containing changeset */
+);
+
+
+/*
+** CAPI3REF: Advance A Changeset Iterator
+**
+** This function may only be used with iterators created by function
+** [sqlite3changeset_start()]. If it is called on an iterator passed to
+** a conflict-handler callback by [sqlite3changeset_apply()], SQLITE_MISUSE
+** is returned and the call has no effect.
+**
+** Immediately after an iterator is created by sqlite3changeset_start(), it
+** does not point to any change in the changeset. Assuming the changeset
+** is not empty, the first call to this function advances the iterator to
+** point to the first change in the changeset. Each subsequent call advances
+** the iterator to point to the next change in the changeset (if any). If
+** no error occurs and the iterator points to a valid change after a call
+** to sqlite3changeset_next() has advanced it, SQLITE_ROW is returned.
+** Otherwise, if all changes in the changeset have already been visited,
+** SQLITE_DONE is returned.
+**
+** If an error occurs, an SQLite error code is returned. Possible error
+** codes include SQLITE_CORRUPT (if the changeset buffer is corrupt) or
+** SQLITE_NOMEM.
+*/
+int sqlite3changeset_next(sqlite3_changeset_iter *pIter);
+
+/*
+** CAPI3REF: Obtain The Current Operation From A Changeset Iterator
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned [SQLITE_ROW]. If this
+** is not the case, this function returns [SQLITE_MISUSE].
+**
+** If argument pzTab is not NULL, then *pzTab is set to point to a
+** nul-terminated utf-8 encoded string containing the name of the table
+** affected by the current change. The buffer remains valid until either
+** sqlite3changeset_next() is called on the iterator or until the
+** conflict-handler function returns. If pnCol is not NULL, then *pnCol is
+** set to the number of columns in the table affected by the change. If
+** pbIncorrect is not NULL, then *pbIndirect is set to true (1) if the change
+** is an indirect change, or false (0) otherwise. See the documentation for
+** [sqlite3session_indirect()] for a description of direct and indirect
+** changes. Finally, if pOp is not NULL, then *pOp is set to one of
+** [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE], depending on the
+** type of change that the iterator currently points to.
+**
+** If no error occurs, SQLITE_OK is returned. If an error does occur, an
+** SQLite error code is returned. The values of the output variables may not
+** be trusted in this case.
+*/
+int sqlite3changeset_op(
+ sqlite3_changeset_iter *pIter, /* Iterator object */
+ const char **pzTab, /* OUT: Pointer to table name */
+ int *pnCol, /* OUT: Number of columns in table */
+ int *pOp, /* OUT: SQLITE_INSERT, DELETE or UPDATE */
+ int *pbIndirect /* OUT: True for an 'indirect' change */
+);
+
+/*
+** CAPI3REF: Obtain The Primary Key Definition Of A Table
+**
+** For each modified table, a changeset includes the following:
+**
+** <ul>
+** <li> The number of columns in the table, and
+** <li> Which of those columns make up the tables PRIMARY KEY.
+** </ul>
+**
+** This function is used to find which columns comprise the PRIMARY KEY of
+** the table modified by the change that iterator pIter currently points to.
+** If successful, *pabPK is set to point to an array of nCol entries, where
+** nCol is the number of columns in the table. Elements of *pabPK are set to
+** 0x01 if the corresponding column is part of the tables primary key, or
+** 0x00 if it is not.
+**
+** If argument pnCol is not NULL, then *pnCol is set to the number of columns
+** in the table.
+**
+** If this function is called when the iterator does not point to a valid
+** entry, SQLITE_MISUSE is returned and the output variables zeroed. Otherwise,
+** SQLITE_OK is returned and the output variables populated as described
+** above.
+*/
+int sqlite3changeset_pk(
+ sqlite3_changeset_iter *pIter, /* Iterator object */
+ unsigned char **pabPK, /* OUT: Array of boolean - true for PK cols */
+ int *pnCol /* OUT: Number of entries in output array */
+);
+
+/*
+** CAPI3REF: Obtain old.* Values From A Changeset Iterator
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
+** Furthermore, it may only be called if the type of change that the iterator
+** currently points to is either [SQLITE_DELETE] or [SQLITE_UPDATE]. Otherwise,
+** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the vector of
+** original row values stored as part of the UPDATE or DELETE change and
+** returns SQLITE_OK. The name of the function comes from the fact that this
+** is similar to the "old.*" columns available to update or delete triggers.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+int sqlite3changeset_old(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int iVal, /* Column number */
+ sqlite3_value **ppValue /* OUT: Old value (or NULL pointer) */
+);
+
+/*
+** CAPI3REF: Obtain new.* Values From A Changeset Iterator
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
+** Furthermore, it may only be called if the type of change that the iterator
+** currently points to is either [SQLITE_UPDATE] or [SQLITE_INSERT]. Otherwise,
+** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the vector of
+** new row values stored as part of the UPDATE or INSERT change and
+** returns SQLITE_OK. If the change is an UPDATE and does not include
+** a new value for the requested column, *ppValue is set to NULL and
+** SQLITE_OK returned. The name of the function comes from the fact that
+** this is similar to the "new.*" columns available to update or delete
+** triggers.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+int sqlite3changeset_new(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int iVal, /* Column number */
+ sqlite3_value **ppValue /* OUT: New value (or NULL pointer) */
+);
+
+/*
+** CAPI3REF: Obtain Conflicting Row Values From A Changeset Iterator
+**
+** This function should only be used with iterator objects passed to a
+** conflict-handler callback by [sqlite3changeset_apply()] with either
+** [SQLITE_CHANGESET_DATA] or [SQLITE_CHANGESET_CONFLICT]. If this function
+** is called on any other iterator, [SQLITE_MISUSE] is returned and *ppValue
+** is set to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the
+** "conflicting row" associated with the current conflict-handler callback
+** and returns SQLITE_OK.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+int sqlite3changeset_conflict(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int iVal, /* Column number */
+ sqlite3_value **ppValue /* OUT: Value from conflicting row */
+);
+
+/*
+** CAPI3REF: Determine The Number Of Foreign Key Constraint Violations
+**
+** This function may only be called with an iterator passed to an
+** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case
+** it sets the output variable to the total number of known foreign key
+** violations in the destination database and returns SQLITE_OK.
+**
+** In all other cases this function returns SQLITE_MISUSE.
+*/
+int sqlite3changeset_fk_conflicts(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int *pnOut /* OUT: Number of FK violations */
+);
+
+
+/*
+** CAPI3REF: Finalize A Changeset Iterator
+**
+** This function is used to finalize an iterator allocated with
+** [sqlite3changeset_start()].
+**
+** This function should only be called on iterators created using the
+** [sqlite3changeset_start()] function. If an application calls this
+** function with an iterator passed to a conflict-handler by
+** [sqlite3changeset_apply()], [SQLITE_MISUSE] is immediately returned and the
+** call has no effect.
+**
+** If an error was encountered within a call to an sqlite3changeset_xxx()
+** function (for example an [SQLITE_CORRUPT] in [sqlite3changeset_next()] or an
+** [SQLITE_NOMEM] in [sqlite3changeset_new()]) then an error code corresponding
+** to that error is returned by this function. Otherwise, SQLITE_OK is
+** returned. This is to allow the following pattern (pseudo-code):
+**
+** sqlite3changeset_start();
+** while( SQLITE_ROW==sqlite3changeset_next() ){
+** // Do something with change.
+** }
+** rc = sqlite3changeset_finalize();
+** if( rc!=SQLITE_OK ){
+** // An error has occurred
+** }
+*/
+int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter);
+
+/*
+** CAPI3REF: Invert A Changeset
+**
+** This function is used to "invert" a changeset object. Applying an inverted
+** changeset to a database reverses the effects of applying the uninverted
+** changeset. Specifically:
+**
+** <ul>
+** <li> Each DELETE change is changed to an INSERT, and
+** <li> Each INSERT change is changed to a DELETE, and
+** <li> For each UPDATE change, the old.* and new.* values are exchanged.
+** </ul>
+**
+** This function does not change the order in which changes appear within
+** the changeset. It merely reverses the sense of each individual change.
+**
+** If successful, a pointer to a buffer containing the inverted changeset
+** is stored in *ppOut, the size of the same buffer is stored in *pnOut, and
+** SQLITE_OK is returned. If an error occurs, both *pnOut and *ppOut are
+** zeroed and an SQLite error code returned.
+**
+** It is the responsibility of the caller to eventually call sqlite3_free()
+** on the *ppOut pointer to free the buffer allocation following a successful
+** call to this function.
+**
+** WARNING/TODO: This function currently assumes that the input is a valid
+** changeset. If it is not, the results are undefined.
+*/
+int sqlite3changeset_invert(
+ int nIn, const void *pIn, /* Input changeset */
+ int *pnOut, void **ppOut /* OUT: Inverse of input */
+);
+
+/*
+** CAPI3REF: Concatenate Two Changeset Objects
+**
+** This function is used to concatenate two changesets, A and B, into a
+** single changeset. The result is a changeset equivalent to applying
+** changeset A followed by changeset B.
+**
+** This function combines the two input changesets using an
+** sqlite3_changegroup object. Calling it produces similar results as the
+** following code fragment:
+**
+** sqlite3_changegroup *pGrp;
+** rc = sqlite3_changegroup_new(&pGrp);
+** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA);
+** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nB, pB);
+** if( rc==SQLITE_OK ){
+** rc = sqlite3changegroup_output(pGrp, pnOut, ppOut);
+** }else{
+** *ppOut = 0;
+** *pnOut = 0;
+** }
+**
+** Refer to the sqlite3_changegroup documentation below for details.
+*/
+int sqlite3changeset_concat(
+ int nA, /* Number of bytes in buffer pA */
+ void *pA, /* Pointer to buffer containing changeset A */
+ int nB, /* Number of bytes in buffer pB */
+ void *pB, /* Pointer to buffer containing changeset B */
+ int *pnOut, /* OUT: Number of bytes in output changeset */
+ void **ppOut /* OUT: Buffer containing output changeset */
+);
+
+
+/*
+** CAPI3REF: Changegroup Handle
+*/
+typedef struct sqlite3_changegroup sqlite3_changegroup;
+
+/*
+** CAPI3REF: Create A New Changegroup Object
+**
+** An sqlite3_changegroup object is used to combine two or more changesets
+** (or patchsets) into a single changeset (or patchset). A single changegroup
+** object may combine changesets or patchsets, but not both. The output is
+** always in the same format as the input.
+**
+** If successful, this function returns SQLITE_OK and populates (*pp) with
+** a pointer to a new sqlite3_changegroup object before returning. The caller
+** should eventually free the returned object using a call to
+** sqlite3changegroup_delete(). If an error occurs, an SQLite error code
+** (i.e. SQLITE_NOMEM) is returned and *pp is set to NULL.
+**
+** The usual usage pattern for an sqlite3_changegroup object is as follows:
+**
+** <ul>
+** <li> It is created using a call to sqlite3changegroup_new().
+**
+** <li> Zero or more changesets (or patchsets) are added to the object
+** by calling sqlite3changegroup_add().
+**
+** <li> The result of combining all input changesets together is obtained
+** by the application via a call to sqlite3changegroup_output().
+**
+** <li> The object is deleted using a call to sqlite3changegroup_delete().
+** </ul>
+**
+** Any number of calls to add() and output() may be made between the calls to
+** new() and delete(), and in any order.
+**
+** As well as the regular sqlite3changegroup_add() and
+** sqlite3changegroup_output() functions, also available are the streaming
+** versions sqlite3changegroup_add_strm() and sqlite3changegroup_output_strm().
+*/
+int sqlite3changegroup_new(sqlite3_changegroup **pp);
+
+/*
+** CAPI3REF: Add A Changeset To A Changegroup
+**
+** Add all changes within the changeset (or patchset) in buffer pData (size
+** nData bytes) to the changegroup.
+**
+** If the buffer contains a patchset, then all prior calls to this function
+** on the same changegroup object must also have specified patchsets. Or, if
+** the buffer contains a changeset, so must have the earlier calls to this
+** function. Otherwise, SQLITE_ERROR is returned and no changes are added
+** to the changegroup.
+**
+** Rows within the changeset and changegroup are identified by the values in
+** their PRIMARY KEY columns. A change in the changeset is considered to
+** apply to the same row as a change already present in the changegroup if
+** the two rows have the same primary key.
+**
+** Changes to rows that do not already appear in the changegroup are
+** simply copied into it. Or, if both the new changeset and the changegroup
+** contain changes that apply to a single row, the final contents of the
+** changegroup depends on the type of each change, as follows:
+**
+** <table border=1 style="margin-left:8ex;margin-right:8ex">
+** <tr><th style="white-space:pre">Existing Change </th>
+** <th style="white-space:pre">New Change </th>
+** <th>Output Change
+** <tr><td>INSERT <td>INSERT <td>
+** The new change is ignored. This case does not occur if the new
+** changeset was recorded immediately after the changesets already
+** added to the changegroup.
+** <tr><td>INSERT <td>UPDATE <td>
+** The INSERT change remains in the changegroup. The values in the
+** INSERT change are modified as if the row was inserted by the
+** existing change and then updated according to the new change.
+** <tr><td>INSERT <td>DELETE <td>
+** The existing INSERT is removed from the changegroup. The DELETE is
+** not added.
+** <tr><td>UPDATE <td>INSERT <td>
+** The new change is ignored. This case does not occur if the new
+** changeset was recorded immediately after the changesets already
+** added to the changegroup.
+** <tr><td>UPDATE <td>UPDATE <td>
+** The existing UPDATE remains within the changegroup. It is amended
+** so that the accompanying values are as if the row was updated once
+** by the existing change and then again by the new change.
+** <tr><td>UPDATE <td>DELETE <td>
+** The existing UPDATE is replaced by the new DELETE within the
+** changegroup.
+** <tr><td>DELETE <td>INSERT <td>
+** If one or more of the column values in the row inserted by the
+** new change differ from those in the row deleted by the existing
+** change, the existing DELETE is replaced by an UPDATE within the
+** changegroup. Otherwise, if the inserted row is exactly the same
+** as the deleted row, the existing DELETE is simply discarded.
+** <tr><td>DELETE <td>UPDATE <td>
+** The new change is ignored. This case does not occur if the new
+** changeset was recorded immediately after the changesets already
+** added to the changegroup.
+** <tr><td>DELETE <td>DELETE <td>
+** The new change is ignored. This case does not occur if the new
+** changeset was recorded immediately after the changesets already
+** added to the changegroup.
+** </table>
+**
+** If the new changeset contains changes to a table that is already present
+** in the changegroup, then the number of columns and the position of the
+** primary key columns for the table must be consistent. If this is not the
+** case, this function fails with SQLITE_SCHEMA. If the input changeset
+** appears to be corrupt and the corruption is detected, SQLITE_CORRUPT is
+** returned. Or, if an out-of-memory condition occurs during processing, this
+** function returns SQLITE_NOMEM. In all cases, if an error occurs the
+** final contents of the changegroup is undefined.
+**
+** If no error occurs, SQLITE_OK is returned.
+*/
+int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pData);
+
+/*
+** CAPI3REF: Obtain A Composite Changeset From A Changegroup
+**
+** Obtain a buffer containing a changeset (or patchset) representing the
+** current contents of the changegroup. If the inputs to the changegroup
+** were themselves changesets, the output is a changeset. Or, if the
+** inputs were patchsets, the output is also a patchset.
+**
+** As with the output of the sqlite3session_changeset() and
+** sqlite3session_patchset() functions, all changes related to a single
+** table are grouped together in the output of this function. Tables appear
+** in the same order as for the very first changeset added to the changegroup.
+** If the second or subsequent changesets added to the changegroup contain
+** changes for tables that do not appear in the first changeset, they are
+** appended onto the end of the output changeset, again in the order in
+** which they are first encountered.
+**
+** If an error occurs, an SQLite error code is returned and the output
+** variables (*pnData) and (*ppData) are set to 0. Otherwise, SQLITE_OK
+** is returned and the output variables are set to the size of and a
+** pointer to the output buffer, respectively. In this case it is the
+** responsibility of the caller to eventually free the buffer using a
+** call to sqlite3_free().
+*/
+int sqlite3changegroup_output(
+ sqlite3_changegroup*,
+ int *pnData, /* OUT: Size of output buffer in bytes */
+ void **ppData /* OUT: Pointer to output buffer */
+);
+
+/*
+** CAPI3REF: Delete A Changegroup Object
+*/
+void sqlite3changegroup_delete(sqlite3_changegroup*);
+
+/*
+** CAPI3REF: Apply A Changeset To A Database
+**
+** Apply a changeset to a database. This function attempts to update the
+** "main" database attached to handle db with the changes found in the
+** changeset passed via the second and third arguments.
+**
+** The fourth argument (xFilter) passed to this function is the "filter
+** callback". If it is not NULL, then for each table affected by at least one
+** change in the changeset, the filter callback is invoked with
+** the table name as the second argument, and a copy of the context pointer
+** passed as the sixth argument to this function as the first. If the "filter
+** callback" returns zero, then no attempt is made to apply any changes to
+** the table. Otherwise, if the return value is non-zero or the xFilter
+** argument to this function is NULL, all changes related to the table are
+** attempted.
+**
+** For each table that is not excluded by the filter callback, this function
+** tests that the target database contains a compatible table. A table is
+** considered compatible if all of the following are true:
+**
+** <ul>
+** <li> The table has the same name as the name recorded in the
+** changeset, and
+** <li> The table has the same number of columns as recorded in the
+** changeset, and
+** <li> The table has primary key columns in the same position as
+** recorded in the changeset.
+** </ul>
+**
+** If there is no compatible table, it is not an error, but none of the
+** changes associated with the table are applied. A warning message is issued
+** via the sqlite3_log() mechanism with the error code SQLITE_SCHEMA. At most
+** one such warning is issued for each table in the changeset.
+**
+** For each change for which there is a compatible table, an attempt is made
+** to modify the table contents according to the UPDATE, INSERT or DELETE
+** change. If a change cannot be applied cleanly, the conflict handler
+** function passed as the fifth argument to sqlite3changeset_apply() may be
+** invoked. A description of exactly when the conflict handler is invoked for
+** each type of change is below.
+**
+** Unlike the xFilter argument, xConflict may not be passed NULL. The results
+** of passing anything other than a valid function pointer as the xConflict
+** argument are undefined.
+**
+** Each time the conflict handler function is invoked, it must return one
+** of [SQLITE_CHANGESET_OMIT], [SQLITE_CHANGESET_ABORT] or
+** [SQLITE_CHANGESET_REPLACE]. SQLITE_CHANGESET_REPLACE may only be returned
+** if the second argument passed to the conflict handler is either
+** SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If the conflict-handler
+** returns an illegal value, any changes already made are rolled back and
+** the call to sqlite3changeset_apply() returns SQLITE_MISUSE. Different
+** actions are taken by sqlite3changeset_apply() depending on the value
+** returned by each invocation of the conflict-handler function. Refer to
+** the documentation for the three
+** [SQLITE_CHANGESET_OMIT|available return values] for details.
+**
+** <dl>
+** <dt>DELETE Changes<dd>
+** For each DELETE change, this function checks if the target database
+** contains a row with the same primary key value (or values) as the
+** original row values stored in the changeset. If it does, and the values
+** stored in all non-primary key columns also match the values stored in
+** the changeset the row is deleted from the target database.
+**
+** If a row with matching primary key values is found, but one or more of
+** the non-primary key fields contains a value different from the original
+** row value stored in the changeset, the conflict-handler function is
+** invoked with [SQLITE_CHANGESET_DATA] as the second argument.
+**
+** If no row with matching primary key values is found in the database,
+** the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
+** passed as the second argument.
+**
+** If the DELETE operation is attempted, but SQLite returns SQLITE_CONSTRAINT
+** (which can only happen if a foreign key constraint is violated), the
+** conflict-handler function is invoked with [SQLITE_CHANGESET_CONSTRAINT]
+** passed as the second argument. This includes the case where the DELETE
+** operation is attempted because an earlier call to the conflict handler
+** function returned [SQLITE_CHANGESET_REPLACE].
+**
+** <dt>INSERT Changes<dd>
+** For each INSERT change, an attempt is made to insert the new row into
+** the database.
+**
+** If the attempt to insert the row fails because the database already
+** contains a row with the same primary key values, the conflict handler
+** function is invoked with the second argument set to
+** [SQLITE_CHANGESET_CONFLICT].
+**
+** If the attempt to insert the row fails because of some other constraint
+** violation (e.g. NOT NULL or UNIQUE), the conflict handler function is
+** invoked with the second argument set to [SQLITE_CHANGESET_CONSTRAINT].
+** This includes the case where the INSERT operation is re-attempted because
+** an earlier call to the conflict handler function returned
+** [SQLITE_CHANGESET_REPLACE].
+**
+** <dt>UPDATE Changes<dd>
+** For each UPDATE change, this function checks if the target database
+** contains a row with the same primary key value (or values) as the
+** original row values stored in the changeset. If it does, and the values
+** stored in all non-primary key columns also match the values stored in
+** the changeset the row is updated within the target database.
+**
+** If a row with matching primary key values is found, but one or more of
+** the non-primary key fields contains a value different from an original
+** row value stored in the changeset, the conflict-handler function is
+** invoked with [SQLITE_CHANGESET_DATA] as the second argument. Since
+** UPDATE changes only contain values for non-primary key fields that are
+** to be modified, only those fields need to match the original values to
+** avoid the SQLITE_CHANGESET_DATA conflict-handler callback.
+**
+** If no row with matching primary key values is found in the database,
+** the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
+** passed as the second argument.
+**
+** If the UPDATE operation is attempted, but SQLite returns
+** SQLITE_CONSTRAINT, the conflict-handler function is invoked with
+** [SQLITE_CHANGESET_CONSTRAINT] passed as the second argument.
+** This includes the case where the UPDATE operation is attempted after
+** an earlier call to the conflict handler function returned
+** [SQLITE_CHANGESET_REPLACE].
+** </dl>
+**
+** It is safe to execute SQL statements, including those that write to the
+** table that the callback related to, from within the xConflict callback.
+** This can be used to further customize the applications conflict
+** resolution strategy.
+**
+** All changes made by this function are enclosed in a savepoint transaction.
+** If any other error (aside from a constraint failure when attempting to
+** write to the target database) occurs, then the savepoint transaction is
+** rolled back, restoring the target database to its original state, and an
+** SQLite error code returned.
+*/
+int sqlite3changeset_apply(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int nChangeset, /* Size of changeset in bytes */
+ void *pChangeset, /* Changeset blob */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx /* First argument passed to xConflict */
+);
+
+/*
+** CAPI3REF: Constants Passed To The Conflict Handler
+**
+** Values that may be passed as the second argument to a conflict-handler.
+**
+** <dl>
+** <dt>SQLITE_CHANGESET_DATA<dd>
+** The conflict handler is invoked with CHANGESET_DATA as the second argument
+** when processing a DELETE or UPDATE change if a row with the required
+** PRIMARY KEY fields is present in the database, but one or more other
+** (non primary-key) fields modified by the update do not contain the
+** expected "before" values.
+**
+** The conflicting row, in this case, is the database row with the matching
+** primary key.
+**
+** <dt>SQLITE_CHANGESET_NOTFOUND<dd>
+** The conflict handler is invoked with CHANGESET_NOTFOUND as the second
+** argument when processing a DELETE or UPDATE change if a row with the
+** required PRIMARY KEY fields is not present in the database.
+**
+** There is no conflicting row in this case. The results of invoking the
+** sqlite3changeset_conflict() API are undefined.
+**
+** <dt>SQLITE_CHANGESET_CONFLICT<dd>
+** CHANGESET_CONFLICT is passed as the second argument to the conflict
+** handler while processing an INSERT change if the operation would result
+** in duplicate primary key values.
+**
+** The conflicting row in this case is the database row with the matching
+** primary key.
+**
+** <dt>SQLITE_CHANGESET_FOREIGN_KEY<dd>
+** If foreign key handling is enabled, and applying a changeset leaves the
+** database in a state containing foreign key violations, the conflict
+** handler is invoked with CHANGESET_FOREIGN_KEY as the second argument
+** exactly once before the changeset is committed. If the conflict handler
+** returns CHANGESET_OMIT, the changes, including those that caused the
+** foreign key constraint violation, are committed. Or, if it returns
+** CHANGESET_ABORT, the changeset is rolled back.
+**
+** No current or conflicting row information is provided. The only function
+** it is possible to call on the supplied sqlite3_changeset_iter handle
+** is sqlite3changeset_fk_conflicts().
+**
+** <dt>SQLITE_CHANGESET_CONSTRAINT<dd>
+** If any other constraint violation occurs while applying a change (i.e.
+** a UNIQUE, CHECK or NOT NULL constraint), the conflict handler is
+** invoked with CHANGESET_CONSTRAINT as the second argument.
+**
+** There is no conflicting row in this case. The results of invoking the
+** sqlite3changeset_conflict() API are undefined.
+**
+** </dl>
+*/
+#define SQLITE_CHANGESET_DATA 1
+#define SQLITE_CHANGESET_NOTFOUND 2
+#define SQLITE_CHANGESET_CONFLICT 3
+#define SQLITE_CHANGESET_CONSTRAINT 4
+#define SQLITE_CHANGESET_FOREIGN_KEY 5
+
+/*
+** CAPI3REF: Constants Returned By The Conflict Handler
+**
+** A conflict handler callback must return one of the following three values.
+**
+** <dl>
+** <dt>SQLITE_CHANGESET_OMIT<dd>
+** If a conflict handler returns this value no special action is taken. The
+** change that caused the conflict is not applied. The session module
+** continues to the next change in the changeset.
+**
+** <dt>SQLITE_CHANGESET_REPLACE<dd>
+** This value may only be returned if the second argument to the conflict
+** handler was SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If this
+** is not the case, any changes applied so far are rolled back and the
+** call to sqlite3changeset_apply() returns SQLITE_MISUSE.
+**
+** If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_DATA conflict
+** handler, then the conflicting row is either updated or deleted, depending
+** on the type of change.
+**
+** If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_CONFLICT conflict
+** handler, then the conflicting row is removed from the database and a
+** second attempt to apply the change is made. If this second attempt fails,
+** the original row is restored to the database before continuing.
+**
+** <dt>SQLITE_CHANGESET_ABORT<dd>
+** If this value is returned, any changes applied so far are rolled back
+** and the call to sqlite3changeset_apply() returns SQLITE_ABORT.
+** </dl>
+*/
+#define SQLITE_CHANGESET_OMIT 0
+#define SQLITE_CHANGESET_REPLACE 1
+#define SQLITE_CHANGESET_ABORT 2
+
+/*
+** CAPI3REF: Streaming Versions of API functions.
+**
+** The six streaming API xxx_strm() functions serve similar purposes to the
+** corresponding non-streaming API functions:
+**
+** <table border=1 style="margin-left:8ex;margin-right:8ex">
+** <tr><th>Streaming function<th>Non-streaming equivalent</th>
+** <tr><td>sqlite3changeset_apply_str<td>[sqlite3changeset_apply]
+** <tr><td>sqlite3changeset_concat_str<td>[sqlite3changeset_concat]
+** <tr><td>sqlite3changeset_invert_str<td>[sqlite3changeset_invert]
+** <tr><td>sqlite3changeset_start_str<td>[sqlite3changeset_start]
+** <tr><td>sqlite3session_changeset_str<td>[sqlite3session_changeset]
+** <tr><td>sqlite3session_patchset_str<td>[sqlite3session_patchset]
+** </table>
+**
+** Non-streaming functions that accept changesets (or patchsets) as input
+** require that the entire changeset be stored in a single buffer in memory.
+** Similarly, those that return a changeset or patchset do so by returning
+** a pointer to a single large buffer allocated using sqlite3_malloc().
+** Normally this is convenient. However, if an application running in a
+** low-memory environment is required to handle very large changesets, the
+** large contiguous memory allocations required can become onerous.
+**
+** In order to avoid this problem, instead of a single large buffer, input
+** is passed to a streaming API functions by way of a callback function that
+** the sessions module invokes to incrementally request input data as it is
+** required. In all cases, a pair of API function parameters such as
+**
+** <pre>
+** int nChangeset,
+** void *pChangeset,
+** </pre>
+**
+** Is replaced by:
+**
+** <pre>
+** int (*xInput)(void *pIn, void *pData, int *pnData),
+** void *pIn,
+** </pre>
+**
+** Each time the xInput callback is invoked by the sessions module, the first
+** argument passed is a copy of the supplied pIn context pointer. The second
+** argument, pData, points to a buffer (*pnData) bytes in size. Assuming no
+** error occurs the xInput method should copy up to (*pnData) bytes of data
+** into the buffer and set (*pnData) to the actual number of bytes copied
+** before returning SQLITE_OK. If the input is completely exhausted, (*pnData)
+** should be set to zero to indicate this. Or, if an error occurs, an SQLite
+** error code should be returned. In all cases, if an xInput callback returns
+** an error, all processing is abandoned and the streaming API function
+** returns a copy of the error code to the caller.
+**
+** In the case of sqlite3changeset_start_strm(), the xInput callback may be
+** invoked by the sessions module at any point during the lifetime of the
+** iterator. If such an xInput callback returns an error, the iterator enters
+** an error state, whereby all subsequent calls to iterator functions
+** immediately fail with the same error code as returned by xInput.
+**
+** Similarly, streaming API functions that return changesets (or patchsets)
+** return them in chunks by way of a callback function instead of via a
+** pointer to a single large buffer. In this case, a pair of parameters such
+** as:
+**
+** <pre>
+** int *pnChangeset,
+** void **ppChangeset,
+** </pre>
+**
+** Is replaced by:
+**
+** <pre>
+** int (*xOutput)(void *pOut, const void *pData, int nData),
+** void *pOut
+** </pre>
+**
+** The xOutput callback is invoked zero or more times to return data to
+** the application. The first parameter passed to each call is a copy of the
+** pOut pointer supplied by the application. The second parameter, pData,
+** points to a buffer nData bytes in size containing the chunk of output
+** data being returned. If the xOutput callback successfully processes the
+** supplied data, it should return SQLITE_OK to indicate success. Otherwise,
+** it should return some other SQLite error code. In this case processing
+** is immediately abandoned and the streaming API function returns a copy
+** of the xOutput error code to the application.
+**
+** The sessions module never invokes an xOutput callback with the third
+** parameter set to a value less than or equal to zero. Other than this,
+** no guarantees are made as to the size of the chunks of data returned.
+*/
+int sqlite3changeset_apply_strm(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
+ void *pIn, /* First arg for xInput */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx /* First argument passed to xConflict */
+);
+int sqlite3changeset_concat_strm(
+ int (*xInputA)(void *pIn, void *pData, int *pnData),
+ void *pInA,
+ int (*xInputB)(void *pIn, void *pData, int *pnData),
+ void *pInB,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+int sqlite3changeset_invert_strm(
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+int sqlite3changeset_start_strm(
+ sqlite3_changeset_iter **pp,
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn
+);
+int sqlite3session_changeset_strm(
+ sqlite3_session *pSession,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+int sqlite3session_patchset_strm(
+ sqlite3_session *pSession,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+int sqlite3changegroup_add_strm(sqlite3_changegroup*,
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn
+);
+int sqlite3changegroup_output_strm(sqlite3_changegroup*,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+
+
+/*
+** Make sure we can call this stuff from C++.
+*/
+#if 0
+}
+#endif
+
+#endif /* !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION) */
+
+/******** End of sqlite3session.h *********/
+/******** Begin file fts5.h *********/
/*
** 2014 May 31
**
** ... FROM ftstable WHERE ftstable MATCH $p ORDER BY rowid
**
** with $p set to a phrase equivalent to the phrase iPhrase of the
-** current query is executed. For each row visited, the callback function
-** passed as the fourth argument is invoked. The context and API objects
-** passed to the callback function may be used to access the properties of
-** each matched row. Invoking Api.xUserData() returns a copy of the pointer
-** passed as the third argument to pUserData.
+** current query is executed. Any column filter that applies to
+** phrase iPhrase of the current query is included in $p. For each
+** row visited, the callback function passed as the fourth argument
+** is invoked. The context and API objects passed to the callback
+** function may be used to access the properties of each matched row.
+** Invoking Api.xUserData() returns a copy of the pointer passed as
+** the third argument to pUserData.
**
** If the callback function returns any value other than SQLITE_OK, the
** query is abandoned and the xQueryPhrase function returns immediately.
** behaviour. The structure methods are expected to function as follows:
**
** xCreate:
-** This function is used to allocate and inititalize a tokenizer instance.
+** This function is used to allocate and initialize a tokenizer instance.
** A tokenizer instance is required to actually tokenize text.
**
** The first argument passed to this function is a copy of the (void*)
#endif /* _FTS5_H */
-
+/******** End of fts5.h *********/
/************** End of sqlite3.h *********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
** The suggested maximum number of in-memory pages to use for
** the main database table and for temporary tables.
**
-** IMPLEMENTATION-OF: R-31093-59126 The default suggested cache size
-** is 2000 pages.
+** IMPLEMENTATION-OF: R-30185-15359 The default suggested cache size is -2000,
+** which means the cache size is limited to 2048000 bytes of memory.
** IMPLEMENTATION-OF: R-48205-43578 The default suggested cache size can be
** altered using the SQLITE_DEFAULT_CACHE_SIZE compile-time options.
*/
#ifndef SQLITE_DEFAULT_CACHE_SIZE
-# define SQLITE_DEFAULT_CACHE_SIZE 2000
+# define SQLITE_DEFAULT_CACHE_SIZE -2000
#endif
/*
/*
** The maximum number of attached databases. This must be between 0
-** and 62. The upper bound on 62 is because a 64-bit integer bitmap
-** is used internally to track attached databases.
+** and 125. The upper bound of 125 is because the attached databases are
+** counted using a signed 8-bit integer which has a maximum value of 127
+** and we have to allow 2 extra counts for the "main" and "temp" databases.
*/
#ifndef SQLITE_MAX_ATTACHED
# define SQLITE_MAX_ATTACHED 10
** The default size of a database page.
*/
#ifndef SQLITE_DEFAULT_PAGE_SIZE
-# define SQLITE_DEFAULT_PAGE_SIZE 1024
+# define SQLITE_DEFAULT_PAGE_SIZE 4096
#endif
#if SQLITE_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE
# undef SQLITE_DEFAULT_PAGE_SIZE
** to the next, so we have developed the following set of #if statements
** to generate appropriate macros for a wide range of compilers.
**
-** The correct "ANSI" way to do this is to use the intptr_t type.
+** The correct "ANSI" way to do this is to use the intptr_t type.
** Unfortunately, that typedef is not available on all compilers, or
** if it is available, it requires an #include of specific headers
** that vary from one machine to the next.
#endif
/*
-** The SQLITE_WITHIN(P,S,E) macro checks to see if pointer P points to
-** something between S (inclusive) and E (exclusive).
-**
-** In other words, S is a buffer and E is a pointer to the first byte after
-** the end of buffer S. This macro returns true if P points to something
-** contained within the buffer S.
-*/
-#if defined(HAVE_STDINT_H)
-# define SQLITE_WITHIN(P,S,E) \
- ((uintptr_t)(P)>=(uintptr_t)(S) && (uintptr_t)(P)<(uintptr_t)(E))
-#else
-# define SQLITE_WITHIN(P,S,E) ((P)>=(S) && (P)<(E))
-#endif
-
-/*
** A macro to hint to the compiler that a function should not be
** inlined.
*/
** the SQLITE_DISABLE_INTRINSIC define.
*/
#if !defined(SQLITE_DISABLE_INTRINSIC)
-# if defined(_MSC_VER) && _MSC_VER>=1300
+# if defined(_MSC_VER) && _MSC_VER>=1400
# if !defined(_WIN32_WCE)
# include <intrin.h>
# pragma intrinsic(_byteswap_ushort)
** is set. Thus NDEBUG becomes an opt-in rather than an opt-out
** feature.
*/
-#if !defined(NDEBUG) && !defined(SQLITE_DEBUG)
+#if !defined(NDEBUG) && !defined(SQLITE_DEBUG)
# define NDEBUG 1
#endif
#if defined(NDEBUG) && defined(SQLITE_DEBUG)
#endif
/*
-** The testcase() macro is used to aid in coverage testing. When
+** The testcase() macro is used to aid in coverage testing. When
** doing coverage testing, the condition inside the argument to
** testcase() must be evaluated both true and false in order to
** get full branch coverage. The testcase() macro is inserted
#endif
/*
-** The ALWAYS and NEVER macros surround boolean expressions which
+** The ALWAYS and NEVER macros surround boolean expressions which
** are intended to always be true or false, respectively. Such
** expressions could be omitted from the code completely. But they
** are included in a few cases in order to enhance the resilience
** be true and false so that the unreachable code they specify will
** not be counted as untested code.
*/
-#if defined(SQLITE_COVERAGE_TEST)
+#if defined(SQLITE_COVERAGE_TEST) || defined(SQLITE_MUTATION_TEST)
# define ALWAYS(X) (1)
# define NEVER(X) (0)
#elif !defined(NDEBUG)
#endif
/*
+** SQLITE_ENABLE_EXPLAIN_COMMENTS is incompatible with SQLITE_OMIT_EXPLAIN
+*/
+#ifdef SQLITE_OMIT_EXPLAIN
+# undef SQLITE_ENABLE_EXPLAIN_COMMENTS
+#endif
+
+/*
** Return true (non-zero) if the input is an integer that is too large
** to fit in 32-bits. This macro is used inside of various testcase()
** macros to verify that we have tested SQLite for large-file support.
** This is the header file for the generic hash-table implementation
** used in SQLite.
*/
-#ifndef _SQLITE_HASH_H_
-#define _SQLITE_HASH_H_
+#ifndef SQLITE_HASH_H
+#define SQLITE_HASH_H
/* Forward declarations of structures. */
typedef struct Hash Hash;
*/
/* #define sqliteHashCount(H) ((H)->count) // NOT USED */
-#endif /* _SQLITE_HASH_H_ */
+#endif /* SQLITE_HASH_H */
/************** End of hash.h ************************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
#define TK_AS 24
#define TK_WITHOUT 25
#define TK_COMMA 26
-#define TK_ID 27
-#define TK_INDEXED 28
-#define TK_ABORT 29
-#define TK_ACTION 30
-#define TK_AFTER 31
-#define TK_ANALYZE 32
-#define TK_ASC 33
-#define TK_ATTACH 34
-#define TK_BEFORE 35
-#define TK_BY 36
-#define TK_CASCADE 37
-#define TK_CAST 38
-#define TK_COLUMNKW 39
-#define TK_CONFLICT 40
-#define TK_DATABASE 41
-#define TK_DESC 42
-#define TK_DETACH 43
-#define TK_EACH 44
-#define TK_FAIL 45
-#define TK_FOR 46
-#define TK_IGNORE 47
-#define TK_INITIALLY 48
-#define TK_INSTEAD 49
-#define TK_LIKE_KW 50
-#define TK_MATCH 51
-#define TK_NO 52
-#define TK_KEY 53
-#define TK_OF 54
-#define TK_OFFSET 55
-#define TK_PRAGMA 56
-#define TK_RAISE 57
-#define TK_RECURSIVE 58
-#define TK_REPLACE 59
-#define TK_RESTRICT 60
-#define TK_ROW 61
-#define TK_TRIGGER 62
-#define TK_VACUUM 63
-#define TK_VIEW 64
-#define TK_VIRTUAL 65
-#define TK_WITH 66
-#define TK_REINDEX 67
-#define TK_RENAME 68
-#define TK_CTIME_KW 69
-#define TK_ANY 70
-#define TK_OR 71
-#define TK_AND 72
-#define TK_IS 73
-#define TK_BETWEEN 74
-#define TK_IN 75
-#define TK_ISNULL 76
-#define TK_NOTNULL 77
-#define TK_NE 78
-#define TK_EQ 79
-#define TK_GT 80
-#define TK_LE 81
-#define TK_LT 82
-#define TK_GE 83
-#define TK_ESCAPE 84
-#define TK_BITAND 85
-#define TK_BITOR 86
-#define TK_LSHIFT 87
-#define TK_RSHIFT 88
-#define TK_PLUS 89
-#define TK_MINUS 90
-#define TK_STAR 91
-#define TK_SLASH 92
-#define TK_REM 93
-#define TK_CONCAT 94
-#define TK_COLLATE 95
-#define TK_BITNOT 96
+#define TK_OR 27
+#define TK_AND 28
+#define TK_IS 29
+#define TK_MATCH 30
+#define TK_LIKE_KW 31
+#define TK_BETWEEN 32
+#define TK_IN 33
+#define TK_ISNULL 34
+#define TK_NOTNULL 35
+#define TK_NE 36
+#define TK_EQ 37
+#define TK_GT 38
+#define TK_LE 39
+#define TK_LT 40
+#define TK_GE 41
+#define TK_ESCAPE 42
+#define TK_BITAND 43
+#define TK_BITOR 44
+#define TK_LSHIFT 45
+#define TK_RSHIFT 46
+#define TK_PLUS 47
+#define TK_MINUS 48
+#define TK_STAR 49
+#define TK_SLASH 50
+#define TK_REM 51
+#define TK_CONCAT 52
+#define TK_COLLATE 53
+#define TK_BITNOT 54
+#define TK_ID 55
+#define TK_INDEXED 56
+#define TK_ABORT 57
+#define TK_ACTION 58
+#define TK_AFTER 59
+#define TK_ANALYZE 60
+#define TK_ASC 61
+#define TK_ATTACH 62
+#define TK_BEFORE 63
+#define TK_BY 64
+#define TK_CASCADE 65
+#define TK_CAST 66
+#define TK_COLUMNKW 67
+#define TK_CONFLICT 68
+#define TK_DATABASE 69
+#define TK_DESC 70
+#define TK_DETACH 71
+#define TK_EACH 72
+#define TK_FAIL 73
+#define TK_FOR 74
+#define TK_IGNORE 75
+#define TK_INITIALLY 76
+#define TK_INSTEAD 77
+#define TK_NO 78
+#define TK_KEY 79
+#define TK_OF 80
+#define TK_OFFSET 81
+#define TK_PRAGMA 82
+#define TK_RAISE 83
+#define TK_RECURSIVE 84
+#define TK_REPLACE 85
+#define TK_RESTRICT 86
+#define TK_ROW 87
+#define TK_TRIGGER 88
+#define TK_VACUUM 89
+#define TK_VIEW 90
+#define TK_VIRTUAL 91
+#define TK_WITH 92
+#define TK_REINDEX 93
+#define TK_RENAME 94
+#define TK_CTIME_KW 95
+#define TK_ANY 96
#define TK_STRING 97
#define TK_JOIN_KW 98
#define TK_CONSTRAINT 99
#define TK_LIMIT 129
#define TK_WHERE 130
#define TK_INTO 131
-#define TK_INTEGER 132
-#define TK_FLOAT 133
-#define TK_BLOB 134
+#define TK_FLOAT 132
+#define TK_BLOB 133
+#define TK_INTEGER 134
#define TK_VARIABLE 135
#define TK_CASE 136
#define TK_WHEN 137
#define TK_UMINUS 155
#define TK_UPLUS 156
#define TK_REGISTER 157
-#define TK_ASTERISK 158
-#define TK_SPACE 159
-#define TK_ILLEGAL 160
+#define TK_VECTOR 158
+#define TK_SELECT_COLUMN 159
+#define TK_ASTERISK 160
+#define TK_SPAN 161
+#define TK_SPACE 162
+#define TK_ILLEGAL 163
/* The token codes above must all fit in 8 bits */
#define TKFLG_MASK 0xff
/*
** OMIT_TEMPDB is set to 1 if SQLITE_OMIT_TEMPDB is defined, or 0
-** afterward. Having this macro allows us to cause the C compiler
+** afterward. Having this macro allows us to cause the C compiler
** to omit code used by TEMP tables without messy #ifndef statements.
*/
#ifdef SQLITE_OMIT_TEMPDB
/*
** If no value has been provided for SQLITE_MAX_WORKER_THREADS, or if
-** SQLITE_TEMP_STORE is set to 3 (never use temporary files), set it
+** SQLITE_TEMP_STORE is set to 3 (never use temporary files), set it
** to zero.
*/
#if SQLITE_TEMP_STORE==3 || SQLITE_THREADSAFE==0
/*
** Macros to compute minimum and maximum of two numbers.
*/
-#define MIN(A,B) ((A)<(B)?(A):(B))
-#define MAX(A,B) ((A)>(B)?(A):(B))
+#ifndef MIN
+# define MIN(A,B) ((A)<(B)?(A):(B))
+#endif
+#ifndef MAX
+# define MAX(A,B) ((A)>(B)?(A):(B))
+#endif
/*
** Swap two objects of type TYPE.
** 4 -> 20 1000 -> 99 1048576 -> 200
** 10 -> 33 1024 -> 100 4294967296 -> 320
**
-** The LogEst can be negative to indicate fractional values.
+** The LogEst can be negative to indicate fractional values.
** Examples:
**
** 0.5 -> -10 0.1 -> -33 0.0625 -> -40
# endif
#endif
+/* The uptr type is an unsigned integer large enough to hold a pointer
+*/
+#if defined(HAVE_STDINT_H)
+ typedef uintptr_t uptr;
+#elif SQLITE_PTRSIZE==4
+ typedef u32 uptr;
+#else
+ typedef u64 uptr;
+#endif
+
+/*
+** The SQLITE_WITHIN(P,S,E) macro checks to see if pointer P points to
+** something between S (inclusive) and E (exclusive).
+**
+** In other words, S is a buffer and E is a pointer to the first byte after
+** the end of buffer S. This macro returns true if P points to something
+** contained within the buffer S.
+*/
+#define SQLITE_WITHIN(P,S,E) (((uptr)(P)>=(uptr)(S))&&((uptr)(P)<(uptr)(E)))
+
+
/*
** Macros to determine whether the machine is big or little endian,
** and whether or not that determination is run-time or compile-time.
#define LARGEST_INT64 (0xffffffff|(((i64)0x7fffffff)<<32))
#define SMALLEST_INT64 (((i64)-1) - LARGEST_INT64)
-/*
+/*
** Round up a number to the next larger multiple of 8. This is used
** to force 8-byte alignment on 64-bit architectures.
*/
/*
** An instance of the following structure is used to store the busy-handler
-** callback for a given sqlite handle.
+** callback for a given sqlite handle.
**
** The sqlite.busyHandler member of the sqlite struct contains the busy
** callback for the database handle. Each pager opened via the sqlite
/*
** The following value as a destructor means to use sqlite3DbFree().
-** The sqlite3DbFree() routine requires two parameters instead of the
-** one parameter that destructors normally want. So we have to introduce
-** this magic value that the code knows to handle differently. Any
+** The sqlite3DbFree() routine requires two parameters instead of the
+** one parameter that destructors normally want. So we have to introduce
+** this magic value that the code knows to handle differently. Any
** pointer will work here as long as it is distinct from SQLITE_STATIC
** and SQLITE_TRANSIENT.
*/
#define SQLITE_WSD const
#define GLOBAL(t,v) (*(t*)sqlite3_wsd_find((void*)&(v), sizeof(v)))
#define sqlite3GlobalConfig GLOBAL(struct Sqlite3Config, sqlite3Config)
-SQLITE_API int SQLITE_STDCALL sqlite3_wsd_init(int N, int J);
-SQLITE_API void *SQLITE_STDCALL sqlite3_wsd_find(void *K, int L);
+SQLITE_API int sqlite3_wsd_init(int N, int J);
+SQLITE_API void *sqlite3_wsd_find(void *K, int L);
#else
- #define SQLITE_WSD
+ #define SQLITE_WSD
#define GLOBAL(t,v) v
#define sqlite3GlobalConfig sqlite3Config
#endif
/*
** The following macros are used to suppress compiler warnings and to
-** make it clear to human readers when a function parameter is deliberately
+** make it clear to human readers when a function parameter is deliberately
** left unused within the body of a function. This usually happens when
-** a function is called via a function pointer. For example the
+** a function is called via a function pointer. For example the
** implementation of an SQL aggregate step callback may not use the
** parameter indicating the number of arguments passed to the aggregate,
** if it knows that this is enforced elsewhere.
typedef struct Module Module;
typedef struct NameContext NameContext;
typedef struct Parse Parse;
+typedef struct PreUpdate PreUpdate;
typedef struct PrintfArguments PrintfArguments;
typedef struct RowSet RowSet;
typedef struct Savepoint Savepoint;
typedef struct With With;
/*
-** Defer sourcing vdbe.h and btree.h until after the "u8" and
+** Defer sourcing vdbe.h and btree.h until after the "u8" and
** "BusyHandler" typedefs. vdbe.h also requires a few of the opaque
** pointer types (i.e. FuncDef) defined above.
*/
** subsystem. See comments in the source code for a detailed description
** of what each interface routine does.
*/
-#ifndef _BTREE_H_
-#define _BTREE_H_
+#ifndef SQLITE_BTREE_H
+#define SQLITE_BTREE_H
/* TODO: This definition is just included so other modules compile. It
** needs to be revisited.
typedef struct Btree Btree;
typedef struct BtCursor BtCursor;
typedef struct BtShared BtShared;
+typedef struct BtreePayload BtreePayload;
SQLITE_PRIVATE int sqlite3BtreeOpen(
SQLITE_PRIVATE int sqlite3BtreeSetMmapLimit(Btree*,sqlite3_int64);
#endif
SQLITE_PRIVATE int sqlite3BtreeSetPagerFlags(Btree*,unsigned);
-SQLITE_PRIVATE int sqlite3BtreeSyncDisabled(Btree*);
SQLITE_PRIVATE int sqlite3BtreeSetPageSize(Btree *p, int nPagesize, int nReserve, int eFix);
SQLITE_PRIVATE int sqlite3BtreeGetPageSize(Btree*);
SQLITE_PRIVATE int sqlite3BtreeMaxPageCount(Btree*,int);
SQLITE_PRIVATE int sqlite3BtreeIsInBackup(Btree*);
SQLITE_PRIVATE void *sqlite3BtreeSchema(Btree *, int, void(*)(void *));
SQLITE_PRIVATE int sqlite3BtreeSchemaLocked(Btree *pBtree);
+#ifndef SQLITE_OMIT_SHARED_CACHE
SQLITE_PRIVATE int sqlite3BtreeLockTable(Btree *pBtree, int iTab, u8 isWriteLock);
+#endif
SQLITE_PRIVATE int sqlite3BtreeSavepoint(Btree *, int, int);
SQLITE_PRIVATE const char *sqlite3BtreeGetFilename(Btree *);
#define BTREE_SAVEPOSITION 0x02 /* Leave cursor pointing at NEXT or PREV */
#define BTREE_AUXDELETE 0x04 /* not the primary delete operation */
-SQLITE_PRIVATE int sqlite3BtreeInsert(BtCursor*, const void *pKey, i64 nKey,
- const void *pData, int nData,
- int nZero, int bias, int seekResult);
+/* An instance of the BtreePayload object describes the content of a single
+** entry in either an index or table btree.
+**
+** Index btrees (used for indexes and also WITHOUT ROWID tables) contain
+** an arbitrary key and no data. These btrees have pKey,nKey set to their
+** key and pData,nData,nZero set to zero.
+**
+** Table btrees (used for rowid tables) contain an integer rowid used as
+** the key and passed in the nKey field. The pKey field is zero.
+** pData,nData hold the content of the new entry. nZero extra zero bytes
+** are appended to the end of the content when constructing the entry.
+**
+** This object is used to pass information into sqlite3BtreeInsert(). The
+** same information used to be passed as five separate parameters. But placing
+** the information into this object helps to keep the interface more
+** organized and understandable, and it also helps the resulting code to
+** run a little faster by using fewer registers for parameter passing.
+*/
+struct BtreePayload {
+ const void *pKey; /* Key content for indexes. NULL for tables */
+ sqlite3_int64 nKey; /* Size of pKey for indexes. PRIMARY KEY for tabs */
+ const void *pData; /* Data for tables. NULL for indexes */
+ int nData; /* Size of pData. 0 if none. */
+ int nZero; /* Extra zero data appended after pData,nData */
+};
+
+SQLITE_PRIVATE int sqlite3BtreeInsert(BtCursor*, const BtreePayload *pPayload,
+ int bias, int seekResult);
SQLITE_PRIVATE int sqlite3BtreeFirst(BtCursor*, int *pRes);
SQLITE_PRIVATE int sqlite3BtreeLast(BtCursor*, int *pRes);
SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor*, int *pRes);
SQLITE_PRIVATE int sqlite3BtreeEof(BtCursor*);
SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor*, int *pRes);
-SQLITE_PRIVATE int sqlite3BtreeKeySize(BtCursor*, i64 *pSize);
+SQLITE_PRIVATE i64 sqlite3BtreeIntegerKey(BtCursor*);
SQLITE_PRIVATE int sqlite3BtreeKey(BtCursor*, u32 offset, u32 amt, void*);
-SQLITE_PRIVATE const void *sqlite3BtreeKeyFetch(BtCursor*, u32 *pAmt);
-SQLITE_PRIVATE const void *sqlite3BtreeDataFetch(BtCursor*, u32 *pAmt);
-SQLITE_PRIVATE int sqlite3BtreeDataSize(BtCursor*, u32 *pSize);
+SQLITE_PRIVATE const void *sqlite3BtreePayloadFetch(BtCursor*, u32 *pAmt);
+SQLITE_PRIVATE u32 sqlite3BtreePayloadSize(BtCursor*);
SQLITE_PRIVATE int sqlite3BtreeData(BtCursor*, u32 offset, u32 amt, void*);
SQLITE_PRIVATE char *sqlite3BtreeIntegrityCheck(Btree*, int *aRoot, int nRoot, int, int*);
SQLITE_PRIVATE struct Pager *sqlite3BtreePager(Btree*);
+#ifndef SQLITE_OMIT_INCRBLOB
SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor*, u32 offset, u32 amt, void*);
SQLITE_PRIVATE void sqlite3BtreeIncrblobCursor(BtCursor *);
+#endif
SQLITE_PRIVATE void sqlite3BtreeClearCursor(BtCursor *);
SQLITE_PRIVATE int sqlite3BtreeSetVersion(Btree *pBt, int iVersion);
SQLITE_PRIVATE int sqlite3BtreeCursorHasHint(BtCursor*, unsigned int mask);
SQLITE_PRIVATE void sqlite3BtreeEnterAll(sqlite3*);
SQLITE_PRIVATE int sqlite3BtreeSharable(Btree*);
SQLITE_PRIVATE void sqlite3BtreeEnterCursor(BtCursor*);
+SQLITE_PRIVATE int sqlite3BtreeConnectionCount(Btree*);
#else
# define sqlite3BtreeEnter(X)
# define sqlite3BtreeEnterAll(X)
# define sqlite3BtreeSharable(X) 0
# define sqlite3BtreeEnterCursor(X)
+# define sqlite3BtreeConnectionCount(X) 1
#endif
#if !defined(SQLITE_OMIT_SHARED_CACHE) && SQLITE_THREADSAFE
#endif
-#endif /* _BTREE_H_ */
+#endif /* SQLITE_BTREE_H */
/************** End of btree.h ***********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
** or VDBE. The VDBE implements an abstract machine that runs a
** simple program to access and modify the underlying database.
*/
-#ifndef _SQLITE_VDBE_H_
-#define _SQLITE_VDBE_H_
+#ifndef SQLITE_VDBE_H
+#define SQLITE_VDBE_H
/* #include <stdio.h> */
/*
struct VdbeOp {
u8 opcode; /* What operation to perform */
signed char p4type; /* One of the P4_xxx constants for p4 */
- u8 opflags; /* Mask of the OPFLG_* flags in opcodes.h */
+ u8 notUsed1;
u8 p5; /* Fifth parameter is an unsigned character */
int p1; /* First operand */
int p2; /* Second parameter (often the jump destination) */
KeyInfo *pKeyInfo; /* Used when p4type is P4_KEYINFO */
int *ai; /* Used when p4type is P4_INTARRAY */
SubProgram *pProgram; /* Used when p4type is P4_SUBPROGRAM */
+ Table *pTab; /* Used when p4type is P4_TABLE */
#ifdef SQLITE_ENABLE_CURSOR_HINTS
Expr *pExpr; /* Used when p4type is P4_EXPR */
#endif
int nOp; /* Elements in aOp[] */
int nMem; /* Number of memory cells required */
int nCsr; /* Number of cursors required */
- int nOnce; /* Number of OP_Once instructions */
void *token; /* id that may be used to recursive triggers */
SubProgram *pNext; /* Next sub-program already visited */
};
#define P4_INTARRAY (-15) /* P4 is a vector of 32-bit integers */
#define P4_SUBPROGRAM (-18) /* P4 is a pointer to a SubProgram structure */
#define P4_ADVANCE (-19) /* P4 is a pointer to BtreeNext() or BtreePrev() */
-#define P4_FUNCCTX (-20) /* P4 is a pointer to an sqlite3_context object */
+#define P4_TABLE (-20) /* P4 is a pointer to a Table structure */
+#define P4_FUNCCTX (-21) /* P4 is a pointer to an sqlite3_context object */
/* Error message codes for OP_Halt */
#define P5_ConstraintNotNull 1
#define OP_VUpdate 12 /* synopsis: data=r[P3@P2] */
#define OP_Goto 13
#define OP_Gosub 14
-#define OP_Return 15
-#define OP_InitCoroutine 16
-#define OP_EndCoroutine 17
-#define OP_Yield 18
+#define OP_InitCoroutine 15
+#define OP_Yield 16
+#define OP_MustBeInt 17
+#define OP_Jump 18
#define OP_Not 19 /* same as TK_NOT, synopsis: r[P2]= !r[P1] */
-#define OP_HaltIfNull 20 /* synopsis: if r[P3]=null halt */
-#define OP_Halt 21
-#define OP_Integer 22 /* synopsis: r[P2]=P1 */
-#define OP_Int64 23 /* synopsis: r[P2]=P4 */
-#define OP_String 24 /* synopsis: r[P2]='P4' (len=P1) */
-#define OP_Null 25 /* synopsis: r[P2..P3]=NULL */
-#define OP_SoftNull 26 /* synopsis: r[P1]=NULL */
-#define OP_Blob 27 /* synopsis: r[P2]=P4 (len=P1) */
-#define OP_Variable 28 /* synopsis: r[P2]=parameter(P1,P4) */
-#define OP_Move 29 /* synopsis: r[P2@P3]=r[P1@P3] */
-#define OP_Copy 30 /* synopsis: r[P2@P3+1]=r[P1@P3+1] */
-#define OP_SCopy 31 /* synopsis: r[P2]=r[P1] */
-#define OP_IntCopy 32 /* synopsis: r[P2]=r[P1] */
-#define OP_ResultRow 33 /* synopsis: output=r[P1@P2] */
-#define OP_CollSeq 34
-#define OP_Function0 35 /* synopsis: r[P3]=func(r[P2@P5]) */
-#define OP_Function 36 /* synopsis: r[P3]=func(r[P2@P5]) */
-#define OP_AddImm 37 /* synopsis: r[P1]=r[P1]+P2 */
-#define OP_MustBeInt 38
-#define OP_RealAffinity 39
-#define OP_Cast 40 /* synopsis: affinity(r[P1]) */
-#define OP_Permutation 41
-#define OP_Compare 42 /* synopsis: r[P1@P3] <-> r[P2@P3] */
-#define OP_Jump 43
-#define OP_Once 44
-#define OP_If 45
-#define OP_IfNot 46
-#define OP_Column 47 /* synopsis: r[P3]=PX */
-#define OP_Affinity 48 /* synopsis: affinity(r[P1@P2]) */
-#define OP_MakeRecord 49 /* synopsis: r[P3]=mkrec(r[P1@P2]) */
-#define OP_Count 50 /* synopsis: r[P2]=count() */
-#define OP_ReadCookie 51
-#define OP_SetCookie 52
-#define OP_ReopenIdx 53 /* synopsis: root=P2 iDb=P3 */
-#define OP_OpenRead 54 /* synopsis: root=P2 iDb=P3 */
-#define OP_OpenWrite 55 /* synopsis: root=P2 iDb=P3 */
-#define OP_OpenAutoindex 56 /* synopsis: nColumn=P2 */
-#define OP_OpenEphemeral 57 /* synopsis: nColumn=P2 */
-#define OP_SorterOpen 58
-#define OP_SequenceTest 59 /* synopsis: if( cursor[P1].ctr++ ) pc = P2 */
-#define OP_OpenPseudo 60 /* synopsis: P3 columns in r[P2] */
-#define OP_Close 61
-#define OP_ColumnsUsed 62
-#define OP_SeekLT 63 /* synopsis: key=r[P3@P4] */
-#define OP_SeekLE 64 /* synopsis: key=r[P3@P4] */
-#define OP_SeekGE 65 /* synopsis: key=r[P3@P4] */
-#define OP_SeekGT 66 /* synopsis: key=r[P3@P4] */
-#define OP_NoConflict 67 /* synopsis: key=r[P3@P4] */
-#define OP_NotFound 68 /* synopsis: key=r[P3@P4] */
-#define OP_Found 69 /* synopsis: key=r[P3@P4] */
-#define OP_NotExists 70 /* synopsis: intkey=r[P3] */
-#define OP_Or 71 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */
-#define OP_And 72 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */
-#define OP_Sequence 73 /* synopsis: r[P2]=cursor[P1].ctr++ */
-#define OP_NewRowid 74 /* synopsis: r[P2]=rowid */
-#define OP_Insert 75 /* synopsis: intkey=r[P3] data=r[P2] */
-#define OP_IsNull 76 /* same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */
-#define OP_NotNull 77 /* same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */
-#define OP_Ne 78 /* same as TK_NE, synopsis: if r[P1]!=r[P3] goto P2 */
-#define OP_Eq 79 /* same as TK_EQ, synopsis: if r[P1]==r[P3] goto P2 */
-#define OP_Gt 80 /* same as TK_GT, synopsis: if r[P1]>r[P3] goto P2 */
-#define OP_Le 81 /* same as TK_LE, synopsis: if r[P1]<=r[P3] goto P2 */
-#define OP_Lt 82 /* same as TK_LT, synopsis: if r[P1]<r[P3] goto P2 */
-#define OP_Ge 83 /* same as TK_GE, synopsis: if r[P1]>=r[P3] goto P2 */
-#define OP_InsertInt 84 /* synopsis: intkey=P3 data=r[P2] */
-#define OP_BitAnd 85 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */
-#define OP_BitOr 86 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */
-#define OP_ShiftLeft 87 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<<r[P1] */
-#define OP_ShiftRight 88 /* same as TK_RSHIFT, synopsis: r[P3]=r[P2]>>r[P1] */
-#define OP_Add 89 /* same as TK_PLUS, synopsis: r[P3]=r[P1]+r[P2] */
-#define OP_Subtract 90 /* same as TK_MINUS, synopsis: r[P3]=r[P2]-r[P1] */
-#define OP_Multiply 91 /* same as TK_STAR, synopsis: r[P3]=r[P1]*r[P2] */
-#define OP_Divide 92 /* same as TK_SLASH, synopsis: r[P3]=r[P2]/r[P1] */
-#define OP_Remainder 93 /* same as TK_REM, synopsis: r[P3]=r[P2]%r[P1] */
-#define OP_Concat 94 /* same as TK_CONCAT, synopsis: r[P3]=r[P2]+r[P1] */
-#define OP_Delete 95
-#define OP_BitNot 96 /* same as TK_BITNOT, synopsis: r[P1]= ~r[P1] */
+#define OP_Once 20
+#define OP_If 21
+#define OP_IfNot 22
+#define OP_SeekLT 23 /* synopsis: key=r[P3@P4] */
+#define OP_SeekLE 24 /* synopsis: key=r[P3@P4] */
+#define OP_SeekGE 25 /* synopsis: key=r[P3@P4] */
+#define OP_SeekGT 26 /* synopsis: key=r[P3@P4] */
+#define OP_Or 27 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */
+#define OP_And 28 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */
+#define OP_NoConflict 29 /* synopsis: key=r[P3@P4] */
+#define OP_NotFound 30 /* synopsis: key=r[P3@P4] */
+#define OP_Found 31 /* synopsis: key=r[P3@P4] */
+#define OP_SeekRowid 32 /* synopsis: intkey=r[P3] */
+#define OP_NotExists 33 /* synopsis: intkey=r[P3] */
+#define OP_IsNull 34 /* same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */
+#define OP_NotNull 35 /* same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */
+#define OP_Ne 36 /* same as TK_NE, synopsis: IF r[P3]!=r[P1] */
+#define OP_Eq 37 /* same as TK_EQ, synopsis: IF r[P3]==r[P1] */
+#define OP_Gt 38 /* same as TK_GT, synopsis: IF r[P3]>r[P1] */
+#define OP_Le 39 /* same as TK_LE, synopsis: IF r[P3]<=r[P1] */
+#define OP_Lt 40 /* same as TK_LT, synopsis: IF r[P3]<r[P1] */
+#define OP_Ge 41 /* same as TK_GE, synopsis: IF r[P3]>=r[P1] */
+#define OP_ElseNotEq 42 /* same as TK_ESCAPE */
+#define OP_BitAnd 43 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */
+#define OP_BitOr 44 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */
+#define OP_ShiftLeft 45 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<<r[P1] */
+#define OP_ShiftRight 46 /* same as TK_RSHIFT, synopsis: r[P3]=r[P2]>>r[P1] */
+#define OP_Add 47 /* same as TK_PLUS, synopsis: r[P3]=r[P1]+r[P2] */
+#define OP_Subtract 48 /* same as TK_MINUS, synopsis: r[P3]=r[P2]-r[P1] */
+#define OP_Multiply 49 /* same as TK_STAR, synopsis: r[P3]=r[P1]*r[P2] */
+#define OP_Divide 50 /* same as TK_SLASH, synopsis: r[P3]=r[P2]/r[P1] */
+#define OP_Remainder 51 /* same as TK_REM, synopsis: r[P3]=r[P2]%r[P1] */
+#define OP_Concat 52 /* same as TK_CONCAT, synopsis: r[P3]=r[P2]+r[P1] */
+#define OP_Last 53
+#define OP_BitNot 54 /* same as TK_BITNOT, synopsis: r[P1]= ~r[P1] */
+#define OP_SorterSort 55
+#define OP_Sort 56
+#define OP_Rewind 57
+#define OP_IdxLE 58 /* synopsis: key=r[P3@P4] */
+#define OP_IdxGT 59 /* synopsis: key=r[P3@P4] */
+#define OP_IdxLT 60 /* synopsis: key=r[P3@P4] */
+#define OP_IdxGE 61 /* synopsis: key=r[P3@P4] */
+#define OP_RowSetRead 62 /* synopsis: r[P3]=rowset(P1) */
+#define OP_RowSetTest 63 /* synopsis: if r[P3] in rowset(P1) goto P2 */
+#define OP_Program 64
+#define OP_FkIfZero 65 /* synopsis: if fkctr[P1]==0 goto P2 */
+#define OP_IfPos 66 /* synopsis: if r[P1]>0 then r[P1]-=P3, goto P2 */
+#define OP_IfNotZero 67 /* synopsis: if r[P1]!=0 then r[P1]-=P3, goto P2 */
+#define OP_DecrJumpZero 68 /* synopsis: if (--r[P1])==0 goto P2 */
+#define OP_IncrVacuum 69
+#define OP_VNext 70
+#define OP_Init 71 /* synopsis: Start at P2 */
+#define OP_Return 72
+#define OP_EndCoroutine 73
+#define OP_HaltIfNull 74 /* synopsis: if r[P3]=null halt */
+#define OP_Halt 75
+#define OP_Integer 76 /* synopsis: r[P2]=P1 */
+#define OP_Int64 77 /* synopsis: r[P2]=P4 */
+#define OP_String 78 /* synopsis: r[P2]='P4' (len=P1) */
+#define OP_Null 79 /* synopsis: r[P2..P3]=NULL */
+#define OP_SoftNull 80 /* synopsis: r[P1]=NULL */
+#define OP_Blob 81 /* synopsis: r[P2]=P4 (len=P1) */
+#define OP_Variable 82 /* synopsis: r[P2]=parameter(P1,P4) */
+#define OP_Move 83 /* synopsis: r[P2@P3]=r[P1@P3] */
+#define OP_Copy 84 /* synopsis: r[P2@P3+1]=r[P1@P3+1] */
+#define OP_SCopy 85 /* synopsis: r[P2]=r[P1] */
+#define OP_IntCopy 86 /* synopsis: r[P2]=r[P1] */
+#define OP_ResultRow 87 /* synopsis: output=r[P1@P2] */
+#define OP_CollSeq 88
+#define OP_Function0 89 /* synopsis: r[P3]=func(r[P2@P5]) */
+#define OP_Function 90 /* synopsis: r[P3]=func(r[P2@P5]) */
+#define OP_AddImm 91 /* synopsis: r[P1]=r[P1]+P2 */
+#define OP_RealAffinity 92
+#define OP_Cast 93 /* synopsis: affinity(r[P1]) */
+#define OP_Permutation 94
+#define OP_Compare 95 /* synopsis: r[P1@P3] <-> r[P2@P3] */
+#define OP_Column 96 /* synopsis: r[P3]=PX */
#define OP_String8 97 /* same as TK_STRING, synopsis: r[P2]='P4' */
-#define OP_ResetCount 98
-#define OP_SorterCompare 99 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */
-#define OP_SorterData 100 /* synopsis: r[P2]=data */
-#define OP_RowKey 101 /* synopsis: r[P2]=key */
-#define OP_RowData 102 /* synopsis: r[P2]=data */
-#define OP_Rowid 103 /* synopsis: r[P2]=rowid */
-#define OP_NullRow 104
-#define OP_Last 105
-#define OP_SorterSort 106
-#define OP_Sort 107
-#define OP_Rewind 108
-#define OP_SorterInsert 109
-#define OP_IdxInsert 110 /* synopsis: key=r[P2] */
-#define OP_IdxDelete 111 /* synopsis: key=r[P2@P3] */
-#define OP_Seek 112 /* synopsis: Move P3 to P1.rowid */
-#define OP_IdxRowid 113 /* synopsis: r[P2]=rowid */
-#define OP_IdxLE 114 /* synopsis: key=r[P3@P4] */
-#define OP_IdxGT 115 /* synopsis: key=r[P3@P4] */
-#define OP_IdxLT 116 /* synopsis: key=r[P3@P4] */
-#define OP_IdxGE 117 /* synopsis: key=r[P3@P4] */
-#define OP_Destroy 118
-#define OP_Clear 119
-#define OP_ResetSorter 120
-#define OP_CreateIndex 121 /* synopsis: r[P2]=root iDb=P1 */
-#define OP_CreateTable 122 /* synopsis: r[P2]=root iDb=P1 */
-#define OP_ParseSchema 123
-#define OP_LoadAnalysis 124
-#define OP_DropTable 125
-#define OP_DropIndex 126
-#define OP_DropTrigger 127
-#define OP_IntegrityCk 128
-#define OP_RowSetAdd 129 /* synopsis: rowset(P1)=r[P2] */
-#define OP_RowSetRead 130 /* synopsis: r[P3]=rowset(P1) */
-#define OP_RowSetTest 131 /* synopsis: if r[P3] in rowset(P1) goto P2 */
-#define OP_Program 132
-#define OP_Real 133 /* same as TK_FLOAT, synopsis: r[P2]=P4 */
-#define OP_Param 134
-#define OP_FkCounter 135 /* synopsis: fkctr[P1]+=P2 */
-#define OP_FkIfZero 136 /* synopsis: if fkctr[P1]==0 goto P2 */
-#define OP_MemMax 137 /* synopsis: r[P1]=max(r[P1],r[P2]) */
-#define OP_IfPos 138 /* synopsis: if r[P1]>0 then r[P1]-=P3, goto P2 */
-#define OP_OffsetLimit 139 /* synopsis: if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1) */
-#define OP_IfNotZero 140 /* synopsis: if r[P1]!=0 then r[P1]-=P3, goto P2 */
-#define OP_DecrJumpZero 141 /* synopsis: if (--r[P1])==0 goto P2 */
-#define OP_JumpZeroIncr 142 /* synopsis: if (r[P1]++)==0 ) goto P2 */
-#define OP_AggStep0 143 /* synopsis: accum=r[P3] step(r[P2@P5]) */
-#define OP_AggStep 144 /* synopsis: accum=r[P3] step(r[P2@P5]) */
-#define OP_AggFinal 145 /* synopsis: accum=r[P1] N=P2 */
-#define OP_IncrVacuum 146
-#define OP_Expire 147
-#define OP_TableLock 148 /* synopsis: iDb=P1 root=P2 write=P3 */
-#define OP_VBegin 149
-#define OP_VCreate 150
-#define OP_VDestroy 151
-#define OP_VOpen 152
-#define OP_VColumn 153 /* synopsis: r[P3]=vcolumn(P2) */
-#define OP_VNext 154
-#define OP_VRename 155
-#define OP_Pagecount 156
-#define OP_MaxPgcnt 157
-#define OP_Init 158 /* synopsis: Start at P2 */
-#define OP_CursorHint 159
-#define OP_Noop 160
-#define OP_Explain 161
+#define OP_Affinity 98 /* synopsis: affinity(r[P1@P2]) */
+#define OP_MakeRecord 99 /* synopsis: r[P3]=mkrec(r[P1@P2]) */
+#define OP_Count 100 /* synopsis: r[P2]=count() */
+#define OP_ReadCookie 101
+#define OP_SetCookie 102
+#define OP_ReopenIdx 103 /* synopsis: root=P2 iDb=P3 */
+#define OP_OpenRead 104 /* synopsis: root=P2 iDb=P3 */
+#define OP_OpenWrite 105 /* synopsis: root=P2 iDb=P3 */
+#define OP_OpenAutoindex 106 /* synopsis: nColumn=P2 */
+#define OP_OpenEphemeral 107 /* synopsis: nColumn=P2 */
+#define OP_SorterOpen 108
+#define OP_SequenceTest 109 /* synopsis: if( cursor[P1].ctr++ ) pc = P2 */
+#define OP_OpenPseudo 110 /* synopsis: P3 columns in r[P2] */
+#define OP_Close 111
+#define OP_ColumnsUsed 112
+#define OP_Sequence 113 /* synopsis: r[P2]=cursor[P1].ctr++ */
+#define OP_NewRowid 114 /* synopsis: r[P2]=rowid */
+#define OP_Insert 115 /* synopsis: intkey=r[P3] data=r[P2] */
+#define OP_InsertInt 116 /* synopsis: intkey=P3 data=r[P2] */
+#define OP_Delete 117
+#define OP_ResetCount 118
+#define OP_SorterCompare 119 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */
+#define OP_SorterData 120 /* synopsis: r[P2]=data */
+#define OP_RowKey 121 /* synopsis: r[P2]=key */
+#define OP_RowData 122 /* synopsis: r[P2]=data */
+#define OP_Rowid 123 /* synopsis: r[P2]=rowid */
+#define OP_NullRow 124
+#define OP_SorterInsert 125
+#define OP_IdxInsert 126 /* synopsis: key=r[P2] */
+#define OP_IdxDelete 127 /* synopsis: key=r[P2@P3] */
+#define OP_Seek 128 /* synopsis: Move P3 to P1.rowid */
+#define OP_IdxRowid 129 /* synopsis: r[P2]=rowid */
+#define OP_Destroy 130
+#define OP_Clear 131
+#define OP_Real 132 /* same as TK_FLOAT, synopsis: r[P2]=P4 */
+#define OP_ResetSorter 133
+#define OP_CreateIndex 134 /* synopsis: r[P2]=root iDb=P1 */
+#define OP_CreateTable 135 /* synopsis: r[P2]=root iDb=P1 */
+#define OP_ParseSchema 136
+#define OP_LoadAnalysis 137
+#define OP_DropTable 138
+#define OP_DropIndex 139
+#define OP_DropTrigger 140
+#define OP_IntegrityCk 141
+#define OP_RowSetAdd 142 /* synopsis: rowset(P1)=r[P2] */
+#define OP_Param 143
+#define OP_FkCounter 144 /* synopsis: fkctr[P1]+=P2 */
+#define OP_MemMax 145 /* synopsis: r[P1]=max(r[P1],r[P2]) */
+#define OP_OffsetLimit 146 /* synopsis: if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1) */
+#define OP_AggStep0 147 /* synopsis: accum=r[P3] step(r[P2@P5]) */
+#define OP_AggStep 148 /* synopsis: accum=r[P3] step(r[P2@P5]) */
+#define OP_AggFinal 149 /* synopsis: accum=r[P1] N=P2 */
+#define OP_Expire 150
+#define OP_TableLock 151 /* synopsis: iDb=P1 root=P2 write=P3 */
+#define OP_VBegin 152
+#define OP_VCreate 153
+#define OP_VDestroy 154
+#define OP_VOpen 155
+#define OP_VColumn 156 /* synopsis: r[P3]=vcolumn(P2) */
+#define OP_VRename 157
+#define OP_Pagecount 158
+#define OP_MaxPgcnt 159
+#define OP_CursorHint 160
+#define OP_Noop 161
+#define OP_Explain 162
/* Properties such as "out2" or "jump" that are specified in
** comments following the "case" for each opcode in the vdbe.c
#define OPFLG_OUT3 0x20 /* out3: P3 is an output */
#define OPFLG_INITIALIZER {\
/* 0 */ 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01,\
-/* 8 */ 0x00, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01, 0x02,\
-/* 16 */ 0x01, 0x02, 0x03, 0x12, 0x08, 0x00, 0x10, 0x10,\
-/* 24 */ 0x10, 0x10, 0x00, 0x10, 0x10, 0x00, 0x00, 0x10,\
-/* 32 */ 0x10, 0x00, 0x00, 0x00, 0x00, 0x02, 0x03, 0x02,\
-/* 40 */ 0x02, 0x00, 0x00, 0x01, 0x01, 0x03, 0x03, 0x00,\
-/* 48 */ 0x00, 0x00, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00,\
-/* 56 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x09,\
-/* 64 */ 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x26,\
-/* 72 */ 0x26, 0x10, 0x10, 0x00, 0x03, 0x03, 0x0b, 0x0b,\
-/* 80 */ 0x0b, 0x0b, 0x0b, 0x0b, 0x00, 0x26, 0x26, 0x26,\
-/* 88 */ 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x00,\
-/* 96 */ 0x12, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,\
-/* 104 */ 0x00, 0x01, 0x01, 0x01, 0x01, 0x04, 0x04, 0x00,\
-/* 112 */ 0x00, 0x10, 0x01, 0x01, 0x01, 0x01, 0x10, 0x00,\
-/* 120 */ 0x00, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,\
-/* 128 */ 0x00, 0x06, 0x23, 0x0b, 0x01, 0x10, 0x10, 0x00,\
-/* 136 */ 0x01, 0x04, 0x03, 0x1a, 0x03, 0x03, 0x03, 0x00,\
-/* 144 */ 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,\
-/* 152 */ 0x00, 0x00, 0x01, 0x00, 0x10, 0x10, 0x01, 0x00,\
-/* 160 */ 0x00, 0x00,}
+/* 8 */ 0x00, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01, 0x01,\
+/* 16 */ 0x03, 0x03, 0x01, 0x12, 0x01, 0x03, 0x03, 0x09,\
+/* 24 */ 0x09, 0x09, 0x09, 0x26, 0x26, 0x09, 0x09, 0x09,\
+/* 32 */ 0x09, 0x09, 0x03, 0x03, 0x0b, 0x0b, 0x0b, 0x0b,\
+/* 40 */ 0x0b, 0x0b, 0x01, 0x26, 0x26, 0x26, 0x26, 0x26,\
+/* 48 */ 0x26, 0x26, 0x26, 0x26, 0x26, 0x01, 0x12, 0x01,\
+/* 56 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x23, 0x0b,\
+/* 64 */ 0x01, 0x01, 0x03, 0x03, 0x03, 0x01, 0x01, 0x01,\
+/* 72 */ 0x02, 0x02, 0x08, 0x00, 0x10, 0x10, 0x10, 0x10,\
+/* 80 */ 0x00, 0x10, 0x10, 0x00, 0x00, 0x10, 0x10, 0x00,\
+/* 88 */ 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x00, 0x00,\
+/* 96 */ 0x00, 0x10, 0x00, 0x00, 0x10, 0x10, 0x00, 0x00,\
+/* 104 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\
+/* 112 */ 0x00, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,\
+/* 120 */ 0x00, 0x00, 0x00, 0x10, 0x00, 0x04, 0x04, 0x00,\
+/* 128 */ 0x00, 0x10, 0x10, 0x00, 0x10, 0x00, 0x10, 0x10,\
+/* 136 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x10,\
+/* 144 */ 0x00, 0x04, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x00,\
+/* 152 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10,\
+/* 160 */ 0x00, 0x00, 0x00,}
+
+/* The sqlite3P2Values() routine is able to run faster if it knows
+** the value of the largest JUMP opcode. The smaller the maximum
+** JUMP opcode the better, so the mkopcodeh.tcl script that
+** generated this include file strives to group all JUMP opcodes
+** together near the beginning of the list.
+*/
+#define SQLITE_MX_JUMP_OPCODE 71 /* Maximum JUMP opcode */
/************** End of opcodes.h *********************************************/
/************** Continuing where we left off in vdbe.h ***********************/
SQLITE_PRIVATE VdbeOp *sqlite3VdbeGetOp(Vdbe*, int);
SQLITE_PRIVATE int sqlite3VdbeMakeLabel(Vdbe*);
SQLITE_PRIVATE void sqlite3VdbeRunOnlyOnce(Vdbe*);
+SQLITE_PRIVATE void sqlite3VdbeReusable(Vdbe*);
SQLITE_PRIVATE void sqlite3VdbeDelete(Vdbe*);
SQLITE_PRIVATE void sqlite3VdbeClearObject(sqlite3*,Vdbe*);
SQLITE_PRIVATE void sqlite3VdbeMakeReady(Vdbe*,Parse*);
# define sqlite3VdbeScanStatus(a,b,c,d,e)
#endif
-#endif
+#endif /* SQLITE_VDBE_H */
/************** End of vdbe.h ************************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
** at a time and provides a journal for rollback.
*/
-#ifndef _PAGER_H_
-#define _PAGER_H_
+#ifndef SQLITE_PAGER_H
+#define SQLITE_PAGER_H
/*
** Default maximum size for persistent journal files. A negative
#define PAGER_LOCKINGMODE_EXCLUSIVE 1
/*
-** Numeric constants that encode the journalmode.
+** Numeric constants that encode the journalmode.
+**
+** The numeric values encoded here (other than PAGER_JOURNALMODE_QUERY)
+** are exposed in the API via the "PRAGMA journal_mode" command and
+** therefore cannot be changed without a compatibility break.
*/
#define PAGER_JOURNALMODE_QUERY (-1) /* Query the value of journalmode */
#define PAGER_JOURNALMODE_DELETE 0 /* Commit by deleting journal file */
/*
** Flags for sqlite3PagerSetFlags()
+**
+** Value constraints (enforced via assert()):
+** PAGER_FULLFSYNC == SQLITE_FullFSync
+** PAGER_CKPT_FULLFSYNC == SQLITE_CkptFullFSync
+** PAGER_CACHE_SPILL == SQLITE_CacheSpill
*/
#define PAGER_SYNCHRONOUS_OFF 0x01 /* PRAGMA synchronous=OFF */
#define PAGER_SYNCHRONOUS_NORMAL 0x02 /* PRAGMA synchronous=NORMAL */
SQLITE_PRIVATE int sqlite3PagerWalCallback(Pager *pPager);
SQLITE_PRIVATE int sqlite3PagerOpenWal(Pager *pPager, int *pisOpen);
SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager);
+SQLITE_PRIVATE int sqlite3PagerUseWal(Pager *pPager);
# ifdef SQLITE_ENABLE_SNAPSHOT
SQLITE_PRIVATE int sqlite3PagerSnapshotGet(Pager *pPager, sqlite3_snapshot **ppSnapshot);
SQLITE_PRIVATE int sqlite3PagerSnapshotOpen(Pager *pPager, sqlite3_snapshot *pSnapshot);
# endif
+#else
+# define sqlite3PagerUseWal(x) 0
#endif
#ifdef SQLITE_ENABLE_ZIPVFS
SQLITE_PRIVATE sqlite3_file *sqlite3PagerFile(Pager*);
SQLITE_PRIVATE sqlite3_file *sqlite3PagerJrnlFile(Pager*);
SQLITE_PRIVATE const char *sqlite3PagerJournalname(Pager*);
-SQLITE_PRIVATE int sqlite3PagerNosync(Pager*);
SQLITE_PRIVATE void *sqlite3PagerTempSpace(Pager*);
SQLITE_PRIVATE int sqlite3PagerIsMemdb(Pager*);
SQLITE_PRIVATE void sqlite3PagerCacheStat(Pager *, int, int, int *);
-SQLITE_PRIVATE void sqlite3PagerClearCache(Pager *);
+SQLITE_PRIVATE void sqlite3PagerClearCache(Pager*);
SQLITE_PRIVATE int sqlite3SectorSize(sqlite3_file *);
/* Functions used to truncate the database file. */
# define enable_simulated_io_errors()
#endif
-#endif /* _PAGER_H_ */
+#endif /* SQLITE_PAGER_H */
/************** End of pager.h ***********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
sqlite3_pcache_page *pPage; /* Pcache object page handle */
void *pData; /* Page data */
void *pExtra; /* Extra content */
- PgHdr *pDirty; /* Transient list of dirty pages */
+ PgHdr *pDirty; /* Transient list of dirty sorted by pgno */
Pager *pPager; /* The pager this page is part of */
Pgno pgno; /* Page number for this page */
#ifdef SQLITE_CHECK_PAGES
#define PGHDR_WRITEABLE 0x004 /* Journaled and ready to modify */
#define PGHDR_NEED_SYNC 0x008 /* Fsync the rollback journal before
** writing this page to the database */
-#define PGHDR_NEED_READ 0x010 /* Content is unread */
-#define PGHDR_DONT_WRITE 0x020 /* Do not write content to disk */
-#define PGHDR_MMAP 0x040 /* This is an mmap page object */
+#define PGHDR_DONT_WRITE 0x010 /* Do not write content to disk */
+#define PGHDR_MMAP 0x020 /* This is an mmap page object */
-#define PGHDR_WAL_APPEND 0x080 /* Appended to wal file */
+#define PGHDR_WAL_APPEND 0x040 /* Appended to wal file */
/* Initialize and shutdown the page cache subsystem */
SQLITE_PRIVATE int sqlite3PcacheInitialize(void);
SQLITE_PRIVATE void sqlite3PcacheMakeDirty(PgHdr*); /* Make sure page is marked dirty */
SQLITE_PRIVATE void sqlite3PcacheMakeClean(PgHdr*); /* Mark a single page as clean */
SQLITE_PRIVATE void sqlite3PcacheCleanAll(PCache*); /* Mark all dirty list pages as clean */
+SQLITE_PRIVATE void sqlite3PcacheClearWritable(PCache*);
/* Change a page number. Used by incr-vacuum. */
SQLITE_PRIVATE void sqlite3PcacheMove(PgHdr*, Pgno);
SQLITE_PRIVATE void sqlite3PcacheIterateDirty(PCache *pCache, void (*xIter)(PgHdr *));
#endif
+#if defined(SQLITE_DEBUG)
+/* Check invariants on a PgHdr object */
+SQLITE_PRIVATE int sqlite3PcachePageSanity(PgHdr*);
+#endif
+
/* Set and get the suggested cache-size for the specified pager-cache.
**
** If no global maximum is configured, then the system attempts to limit
SQLITE_PRIVATE int sqlite3HeaderSizePcache(void);
SQLITE_PRIVATE int sqlite3HeaderSizePcache1(void);
+/* Number of dirty pages as a percentage of the configured cache size */
+SQLITE_PRIVATE int sqlite3PCachePercentDirty(PCache*);
+
#endif /* _PCACHE_H_ */
/************** End of pcache.h **********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
-
/************** Include os.h in the middle of sqliteInt.h ********************/
/************** Begin file os.h **********************************************/
/*
** This file contains pre-processor directives related to operating system
** detection and/or setup.
*/
-#ifndef _OS_SETUP_H_
-#define _OS_SETUP_H_
+#ifndef SQLITE_OS_SETUP_H
+#define SQLITE_OS_SETUP_H
/*
** Figure out if we are dealing with Unix, Windows, or some other operating
# endif
#endif
-#endif /* _OS_SETUP_H_ */
+#endif /* SQLITE_OS_SETUP_H */
/************** End of os_setup.h ********************************************/
/************** Continuing where we left off in os.h *************************/
/*
** Functions for accessing sqlite3_file methods
*/
-SQLITE_PRIVATE int sqlite3OsClose(sqlite3_file*);
+SQLITE_PRIVATE void sqlite3OsClose(sqlite3_file*);
SQLITE_PRIVATE int sqlite3OsRead(sqlite3_file*, void*, int amt, i64 offset);
SQLITE_PRIVATE int sqlite3OsWrite(sqlite3_file*, const void*, int amt, i64 offset);
SQLITE_PRIVATE int sqlite3OsTruncate(sqlite3_file*, i64 size);
#endif /* SQLITE_OMIT_LOAD_EXTENSION */
SQLITE_PRIVATE int sqlite3OsRandomness(sqlite3_vfs *, int, char *);
SQLITE_PRIVATE int sqlite3OsSleep(sqlite3_vfs *, int);
+SQLITE_PRIVATE int sqlite3OsGetLastError(sqlite3_vfs*);
SQLITE_PRIVATE int sqlite3OsCurrentTimeInt64(sqlite3_vfs *, sqlite3_int64*);
/*
** sqlite3_malloc() to obtain space for the file-handle structure.
*/
SQLITE_PRIVATE int sqlite3OsOpenMalloc(sqlite3_vfs *, const char *, sqlite3_file **, int,int*);
-SQLITE_PRIVATE int sqlite3OsCloseFree(sqlite3_file *);
+SQLITE_PRIVATE void sqlite3OsCloseFree(sqlite3_file *);
#endif /* _SQLITE_OS_H_ */
/************** End of mutex.h ***********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
+/* The SQLITE_EXTRA_DURABLE compile-time option used to set the default
+** synchronous setting to EXTRA. It is no longer supported.
+*/
+#ifdef SQLITE_EXTRA_DURABLE
+# warning Use SQLITE_DEFAULT_SYNCHRONOUS=3 instead of SQLITE_EXTRA_DURABLE
+# define SQLITE_DEFAULT_SYNCHRONOUS 3
+#endif
+
+/*
+** Default synchronous levels.
+**
+** Note that (for historcal reasons) the PAGER_SYNCHRONOUS_* macros differ
+** from the SQLITE_DEFAULT_SYNCHRONOUS value by 1.
+**
+** PAGER_SYNCHRONOUS DEFAULT_SYNCHRONOUS
+** OFF 1 0
+** NORMAL 2 1
+** FULL 3 2
+** EXTRA 4 3
+**
+** The "PRAGMA synchronous" statement also uses the zero-based numbers.
+** In other words, the zero-based numbers are used for all external interfaces
+** and the one-based values are used internally.
+*/
+#ifndef SQLITE_DEFAULT_SYNCHRONOUS
+# define SQLITE_DEFAULT_SYNCHRONOUS (PAGER_SYNCHRONOUS_FULL-1)
+#endif
+#ifndef SQLITE_DEFAULT_WAL_SYNCHRONOUS
+# define SQLITE_DEFAULT_WAL_SYNCHRONOUS SQLITE_DEFAULT_SYNCHRONOUS
+#endif
/*
** Each database file to be accessed by the system is an instance
** databases may be attached.
*/
struct Db {
- char *zName; /* Name of this database */
+ char *zDbSName; /* Name of this database. (schema name, not filename) */
Btree *pBt; /* The B*Tree structure for this database file */
u8 safety_level; /* How aggressive at syncing data to disk */
+ u8 bSyncSet; /* True if "PRAGMA synchronous=N" has been run */
Schema *pSchema; /* Pointer to database schema (possibly shared) */
};
** the Schema for the TEMP databaes (sqlite3.aDb[1]) which is free-standing.
** In shared cache mode, a single Schema object can be shared by multiple
** Btrees that refer to the same underlying BtShared object.
-**
+**
** Schema objects are automatically deallocated when the last Btree that
** references them is destroyed. The TEMP Schema is manually freed by
** sqlite3_close().
};
/*
-** These macros can be used to test, set, or clear bits in the
+** These macros can be used to test, set, or clear bits in the
** Db.pSchema->flags field.
*/
#define DbHasProperty(D,I,P) (((D)->aDb[I].pSchema->schemaFlags&(P))==(P))
};
/*
-** A hash table for function definitions.
+** A hash table for built-in function definitions. (Application-defined
+** functions use a regular table table from hash.h.)
**
** Hash each FuncDef structure into one of the FuncDefHash.a[] slots.
-** Collisions are on the FuncDef.pHash chain.
+** Collisions are on the FuncDef.u.pHash chain.
*/
+#define SQLITE_FUNC_HASH_SZ 23
struct FuncDefHash {
- FuncDef *a[23]; /* Hash table for functions */
+ FuncDef *a[SQLITE_FUNC_HASH_SZ]; /* Hash table for functions */
};
#ifdef SQLITE_USER_AUTHENTICATION
const char*);
#endif
+#ifndef SQLITE_OMIT_DEPRECATED
+/* This is an extra SQLITE_TRACE macro that indicates "legacy" tracing
+** in the style of sqlite3_trace()
+*/
+#define SQLITE_TRACE_LEGACY 0x80
+#else
+#define SQLITE_TRACE_LEGACY 0
+#endif /* SQLITE_OMIT_DEPRECATED */
+
/*
** Each database connection is an instance of the following structure.
unsigned int openFlags; /* Flags passed to sqlite3_vfs.xOpen() */
int errCode; /* Most recent error code (SQLITE_*) */
int errMask; /* & result codes with this before returning */
+ int iSysErrno; /* Errno value from last system error */
u16 dbOptFlags; /* Flags to enable/disable optimizations */
u8 enc; /* Text encoding */
u8 autoCommit; /* The auto-commit flag. */
u8 suppressErr; /* Do not issue error messages if true */
u8 vtabOnConflict; /* Value to return for s3_vtab_on_conflict() */
u8 isTransactionSavepoint; /* True if the outermost savepoint is a TS */
+ u8 mTrace; /* zero or more SQLITE_TRACE flags */
int nextPagesize; /* Pagesize after VACUUM if >0 */
u32 magic; /* Magic number for detect library misuse */
int nChange; /* Value returned by sqlite3_changes() */
int nVDestroy; /* Number of active OP_VDestroy operations */
int nExtension; /* Number of loaded extensions */
void **aExtension; /* Array of shared library handles */
- void (*xTrace)(void*,const char*); /* Trace function */
+ int (*xTrace)(u32,void*,void*,void*); /* Trace function */
void *pTraceArg; /* Argument to the trace function */
void (*xProfile)(void*,const char*,u64); /* Profiling function */
void *pProfileArg; /* Argument to profile function */
- void *pCommitArg; /* Argument to xCommitCallback() */
+ void *pCommitArg; /* Argument to xCommitCallback() */
int (*xCommitCallback)(void*); /* Invoked at every commit. */
- void *pRollbackArg; /* Argument to xRollbackCallback() */
+ void *pRollbackArg; /* Argument to xRollbackCallback() */
void (*xRollbackCallback)(void*); /* Invoked at every commit. */
void *pUpdateArg;
void (*xUpdateCallback)(void*,int, const char*,const char*,sqlite_int64);
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ void *pPreUpdateArg; /* First argument to xPreUpdateCallback */
+ void (*xPreUpdateCallback)( /* Registered using sqlite3_preupdate_hook() */
+ void*,sqlite3*,int,char const*,char const*,sqlite3_int64,sqlite3_int64
+ );
+ PreUpdate *pPreUpdate; /* Context for active pre-update callback */
+#endif /* SQLITE_ENABLE_PREUPDATE_HOOK */
#ifndef SQLITE_OMIT_WAL
int (*xWalCallback)(void *, sqlite3 *, const char *, int);
void *pWalArg;
VTable **aVTrans; /* Virtual tables with open transactions */
VTable *pDisconnect; /* Disconnect these in next sqlite3_prepare() */
#endif
- FuncDefHash aFunc; /* Hash table of connection functions */
+ Hash aFunc; /* Hash table of connection functions */
Hash aCollSeq; /* All collating sequences */
BusyHandler busyHandler; /* Busy callback */
Db aDbStatic[2]; /* Static space for the 2 default backends */
i64 nDeferredImmCons; /* Net deferred immediate constraints */
int *pnBytesFreed; /* If not NULL, increment this in DbFree() */
#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY
- /* The following variables are all protected by the STATIC_MASTER
- ** mutex, not by sqlite3.mutex. They are used by code in notify.c.
+ /* The following variables are all protected by the STATIC_MASTER
+ ** mutex, not by sqlite3.mutex. They are used by code in notify.c.
**
** When X.pUnlockConnection==Y, that means that X is waiting for Y to
** unlock so that it can proceed.
/*
** Possible values for the sqlite3.flags.
+**
+** Value constraints (enforced via assert()):
+** SQLITE_FullFSync == PAGER_FULLFSYNC
+** SQLITE_CkptFullFSync == PAGER_CKPT_FULLFSYNC
+** SQLITE_CacheSpill == PAGER_CACHE_SPILL
*/
#define SQLITE_VdbeTrace 0x00000001 /* True to trace VDBE execution */
#define SQLITE_InternChanges 0x00000002 /* Uncommitted Hash table changes */
#define SQLITE_AutoIndex 0x00100000 /* Enable automatic indexes */
#define SQLITE_PreferBuiltin 0x00200000 /* Preference to built-in funcs */
#define SQLITE_LoadExtension 0x00400000 /* Enable load_extension */
-#define SQLITE_EnableTrigger 0x00800000 /* True to enable triggers */
-#define SQLITE_DeferFKs 0x01000000 /* Defer all FK constraints */
-#define SQLITE_QueryOnly 0x02000000 /* Disable database changes */
-#define SQLITE_VdbeEQP 0x04000000 /* Debug EXPLAIN QUERY PLAN */
-#define SQLITE_Vacuum 0x08000000 /* Currently in a VACUUM */
-#define SQLITE_CellSizeCk 0x10000000 /* Check btree cell sizes on load */
+#define SQLITE_LoadExtFunc 0x00800000 /* Enable load_extension() SQL func */
+#define SQLITE_EnableTrigger 0x01000000 /* True to enable triggers */
+#define SQLITE_DeferFKs 0x02000000 /* Defer all FK constraints */
+#define SQLITE_QueryOnly 0x04000000 /* Disable database changes */
+#define SQLITE_VdbeEQP 0x08000000 /* Debug EXPLAIN QUERY PLAN */
+#define SQLITE_Vacuum 0x10000000 /* Currently in a VACUUM */
+#define SQLITE_CellSizeCk 0x20000000 /* Check btree cell sizes on load */
+#define SQLITE_Fts3Tokenizer 0x40000000 /* Enable fts3_tokenizer(2) */
/*
/*
** Each SQL function is defined by an instance of the following
-** structure. A pointer to this structure is stored in the sqlite.aFunc
-** hash table. When multiple functions have the same name, the hash table
-** points to a linked list of these structures.
+** structure. For global built-in functions (ex: substr(), max(), count())
+** a pointer to this structure is held in the sqlite3BuiltinFunctions object.
+** For per-connection application-defined functions, a pointer to this
+** structure is held in the db->aHash hash table.
+**
+** The u.pHash field is used by the global built-ins. The u.pDestructor
+** field is used by per-connection app-def functions.
*/
struct FuncDef {
- i16 nArg; /* Number of arguments. -1 means unlimited */
+ i8 nArg; /* Number of arguments. -1 means unlimited */
u16 funcFlags; /* Some combination of SQLITE_FUNC_* */
void *pUserData; /* User data parameter */
FuncDef *pNext; /* Next function with same name */
void (*xSFunc)(sqlite3_context*,int,sqlite3_value**); /* func or agg-step */
void (*xFinalize)(sqlite3_context*); /* Agg finalizer */
- char *zName; /* SQL name of the function. */
- FuncDef *pHash; /* Next with a different name but the same hash */
- FuncDestructor *pDestructor; /* Reference counted destructor function */
+ const char *zName; /* SQL name of the function. */
+ union {
+ FuncDef *pHash; /* Next with a different name but the same hash */
+ FuncDestructor *pDestructor; /* Reference counted destructor function */
+ } u;
};
/*
** This structure encapsulates a user-function destructor callback (as
** configured using create_function_v2()) and a reference counter. When
** create_function_v2() is called to create a function with a destructor,
-** a single object of this type is allocated. FuncDestructor.nRef is set to
+** a single object of this type is allocated. FuncDestructor.nRef is set to
** the number of FuncDef objects created (either 1 or 3, depending on whether
** or not the specified encoding is SQLITE_ANY). The FuncDef.pDestructor
** member of each of the new FuncDef objects is set to point to the allocated
** values must correspond to OPFLAG_LENGTHARG and OPFLAG_TYPEOFARG. And
** SQLITE_FUNC_CONSTANT must be the same as SQLITE_DETERMINISTIC. There
** are assert() statements in the code to verify this.
+**
+** Value constraints (enforced via assert()):
+** SQLITE_FUNC_MINMAX == NC_MinMaxAgg == SF_MinMaxAgg
+** SQLITE_FUNC_LENGTH == OPFLAG_LENGTHARG
+** SQLITE_FUNC_TYPEOF == OPFLAG_TYPEOFARG
+** SQLITE_FUNC_CONSTANT == SQLITE_DETERMINISTIC from the API
+** SQLITE_FUNC_ENCMASK depends on SQLITE_UTF* macros in the API
*/
#define SQLITE_FUNC_ENCMASK 0x0003 /* SQLITE_UTF8, SQLITE_UTF16BE or UTF16LE */
#define SQLITE_FUNC_LIKE 0x0004 /* Candidate for the LIKE optimization */
** used to create the initializers for the FuncDef structures.
**
** FUNCTION(zName, nArg, iArg, bNC, xFunc)
-** Used to create a scalar function definition of a function zName
+** Used to create a scalar function definition of a function zName
** implemented by C function xFunc that accepts nArg arguments. The
** value passed as iArg is cast to a (void*) and made available
-** as the user-data (sqlite3_user_data()) for the function. If
+** as the user-data (sqlite3_user_data()) for the function. If
** argument bNC is true, then the SQLITE_FUNC_NEEDCOLL flag is set.
**
** VFUNCTION(zName, nArg, iArg, bNC, xFunc)
** FUNCTION().
**
** LIKEFUNC(zName, nArg, pArg, flags)
-** Used to create a scalar function definition of a function zName
-** that accepts nArg arguments and is implemented by a call to C
+** Used to create a scalar function definition of a function zName
+** that accepts nArg arguments and is implemented by a call to C
** function likeFunc. Argument pArg is cast to a (void *) and made
** available as the function user-data (sqlite3_user_data()). The
** FuncDef.flags variable is set to the value passed as the flags
*/
#define FUNCTION(zName, nArg, iArg, bNC, xFunc) \
{nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
- SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, 0, 0}
+ SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} }
#define VFUNCTION(zName, nArg, iArg, bNC, xFunc) \
{nArg, SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
- SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, 0, 0}
+ SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} }
#define DFUNCTION(zName, nArg, iArg, bNC, xFunc) \
{nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
- SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, 0, 0}
+ SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} }
#define FUNCTION2(zName, nArg, iArg, bNC, xFunc, extraFlags) \
{nArg,SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL)|extraFlags,\
- SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, 0, 0}
+ SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} }
#define STR_FUNCTION(zName, nArg, pArg, bNC, xFunc) \
{nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
- pArg, 0, xFunc, 0, #zName, 0, 0}
+ pArg, 0, xFunc, 0, #zName, }
#define LIKEFUNC(zName, nArg, arg, flags) \
{nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|flags, \
- (void *)arg, 0, likeFunc, 0, #zName, 0, 0}
+ (void *)arg, 0, likeFunc, 0, #zName, {0} }
#define AGGREGATE(zName, nArg, arg, nc, xStep, xFinal) \
{nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL), \
- SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,#zName,0,0}
+ SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,#zName, {0}}
#define AGGREGATE2(zName, nArg, arg, nc, xStep, xFinal, extraFlags) \
{nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL)|extraFlags, \
- SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,#zName,0,0}
+ SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,#zName, {0}}
/*
** All current savepoints are stored in a linked list starting at
** of this structure.
*/
struct Column {
- char *zName; /* Name of this column */
+ char *zName; /* Name of this column, \000, then the type */
Expr *pDflt; /* Default value of this column */
- char *zDflt; /* Original text of the default value */
- char *zType; /* Data type for this column */
char *zColl; /* Collating sequence. If NULL, use the default */
u8 notNull; /* An OE_ code for handling a NOT NULL constraint */
char affinity; /* One of the SQLITE_AFF_... values */
*/
#define COLFLAG_PRIMKEY 0x0001 /* Column is part of the primary key */
#define COLFLAG_HIDDEN 0x0002 /* A hidden column in a virtual table */
+#define COLFLAG_HASTYPE 0x0004 /* Type name follows column name */
/*
** A "Collating Sequence" is defined by an instance of the following
**
** These used to have mnemonic name like 'i' for SQLITE_AFF_INTEGER and
** 't' for SQLITE_AFF_TEXT. But we can save a little space and improve
-** the speed a little by numbering the values consecutively.
+** the speed a little by numbering the values consecutively.
**
** But rather than start with 0 or 1, we begin with 'A'. That way,
** when multiple affinity types are concatenated into a string and
/*
** The SQLITE_AFF_MASK values masks off the significant bits of an
-** affinity value.
+** affinity value.
*/
#define SQLITE_AFF_MASK 0x47
** operator is NULL. It is added to certain comparison operators to
** prove that the operands are always NOT NULL.
*/
+#define SQLITE_KEEPNULL 0x08 /* Used by vector == or <> */
#define SQLITE_JUMPIFNULL 0x10 /* jumps if either operand is NULL */
#define SQLITE_STOREP2 0x20 /* Store result in reg[P2] rather than jump */
#define SQLITE_NULLEQ 0x80 /* NULL=NULL */
/*
** An object of this type is created for each virtual table present in
-** the database schema.
+** the database schema.
**
** If the database schema is shared, then there is one instance of this
** structure for each database connection (sqlite3*) that uses the shared
** schema. This is because each database connection requires its own unique
-** instance of the sqlite3_vtab* handle used to access the virtual table
-** implementation. sqlite3_vtab* handles can not be shared between
-** database connections, even when the rest of the in-memory database
+** instance of the sqlite3_vtab* handle used to access the virtual table
+** implementation. sqlite3_vtab* handles can not be shared between
+** database connections, even when the rest of the in-memory database
** schema is shared, as the implementation often stores the database
** connection handle passed to it via the xConnect() or xCreate() method
** during initialization internally. This database connection handle may
-** then be used by the virtual table implementation to access real tables
-** within the database. So that they appear as part of the callers
-** transaction, these accesses need to be made via the same database
+** then be used by the virtual table implementation to access real tables
+** within the database. So that they appear as part of the callers
+** transaction, these accesses need to be made via the same database
** connection as that used to execute SQL operations on the virtual table.
**
** All VTable objects that correspond to a single table in a shared
** sqlite3_vtab* handle in the compiled query.
**
** When an in-memory Table object is deleted (for example when the
-** schema is being reloaded for some reason), the VTable objects are not
-** deleted and the sqlite3_vtab* handles are not xDisconnect()ed
+** schema is being reloaded for some reason), the VTable objects are not
+** deleted and the sqlite3_vtab* handles are not xDisconnect()ed
** immediately. Instead, they are moved from the Table.pVTable list to
** another linked list headed by the sqlite3.pDisconnect member of the
-** corresponding sqlite3 structure. They are then deleted/xDisconnected
+** corresponding sqlite3 structure. They are then deleted/xDisconnected
** next time a statement is prepared using said sqlite3*. This is done
** to avoid deadlock issues involving multiple sqlite3.mutex mutexes.
** Refer to comments above function sqlite3VtabUnlockList() for an
** explanation as to why it is safe to add an entry to an sqlite3.pDisconnect
** list without holding the corresponding sqlite3.mutex mutex.
**
-** The memory for objects of this type is always allocated by
-** sqlite3DbMalloc(), using the connection handle stored in VTable.db as
+** The memory for objects of this type is always allocated by
+** sqlite3DbMalloc(), using the connection handle stored in VTable.db as
** the first argument.
*/
struct VTable {
** key is set to NULL. CASCADE means that a DELETE or UPDATE of the
** referenced table row is propagated into the row that holds the
** foreign key.
-**
+**
** The following symbolic values are used to record which type
** of action to take.
*/
/*
** An instance of the following structure is passed as the first
-** argument to sqlite3VdbeKeyCompare and is used to control the
+** argument to sqlite3VdbeKeyCompare and is used to control the
** comparison of the two index keys.
**
** Note that aSortOrder[] and aColl[] have nField+1 slots. There
** The key comparison functions actually return default_rc when they find
** an equals comparison. default_rc can be -1, 0, or +1. If there are
** multiple entries in the b-tree with the same key (when only looking
-** at the first pKeyInfo->nFields,) then default_rc can be set to -1 to
+** at the first pKeyInfo->nFields,) then default_rc can be set to -1 to
** cause the search to find the last match, or +1 to cause the search to
** find the first match.
**
** In the Table structure describing Ex1, nCol==3 because there are
** three columns in the table. In the Index structure describing
** Ex2, nColumn==2 since 2 of the 3 columns of Ex1 are indexed.
-** The value of aiColumn is {2, 0}. aiColumn[0]==2 because the
+** The value of aiColumn is {2, 0}. aiColumn[0]==2 because the
** first column to be indexed (c3) has an index of 2 in Ex1.aCol[].
** The second column to be indexed (c1) has an index of 0 in
** Ex1.aCol[], hence Ex2.aiColumn[1]==0.
** The Index.onError field determines whether or not the indexed columns
** must be unique and what to do if they are not. When Index.onError=OE_None,
** it means this is not a unique index. Otherwise it is a unique index
-** and the value of Index.onError indicate the which conflict resolution
+** and the value of Index.onError indicate the which conflict resolution
** algorithm to employ whenever an attempt is made to insert a non-unique
** element.
**
#define XN_EXPR (-2) /* Indexed column is an expression */
/*
-** Each sample stored in the sqlite_stat3 table is represented in memory
+** Each sample stored in the sqlite_stat3 table is represented in memory
** using a structure of this type. See documentation at the top of the
** analyze.c source file for additional information.
*/
** to represent the greater-than-or-equal-to operator in the expression
** tree.
**
-** If the expression is an SQL literal (TK_INTEGER, TK_FLOAT, TK_BLOB,
+** If the expression is an SQL literal (TK_INTEGER, TK_FLOAT, TK_BLOB,
** or TK_STRING), then Expr.token contains the text of the SQL literal. If
-** the expression is a variable (TK_VARIABLE), then Expr.token contains the
+** the expression is a variable (TK_VARIABLE), then Expr.token contains the
** variable name. Finally, if the expression is an SQL function (TK_FUNCTION),
** then Expr.token contains the name of the function.
**
** a CASE expression or an IN expression of the form "<lhs> IN (<y>, <z>...)".
** Expr.x.pSelect is used if the expression is a sub-select or an expression of
** the form "<lhs> IN (SELECT ...)". If the EP_xIsSelect bit is set in the
-** Expr.flags mask, then Expr.x.pSelect is valid. Otherwise, Expr.x.pList is
+** Expr.flags mask, then Expr.x.pSelect is valid. Otherwise, Expr.x.pList is
** valid.
**
** An expression of the form ID or ID.ID refers to a column in a table.
** value is also stored in the Expr.iAgg column in the aggregate so that
** it can be accessed after all aggregates are computed.
**
-** If the expression is an unbound variable marker (a question mark
-** character '?' in the original SQL) then the Expr.iTable holds the index
+** If the expression is an unbound variable marker (a question mark
+** character '?' in the original SQL) then the Expr.iTable holds the index
** number for that variable.
**
** If the expression is a subquery then Expr.iColumn holds an integer
/* If the EP_TokenOnly flag is set in the Expr.flags mask, then no
** space is allocated for the fields below this point. An attempt to
- ** access them will result in a segfault or malfunction.
+ ** access them will result in a segfault or malfunction.
*********************************************************************/
Expr *pLeft; /* Left subnode */
int iTable; /* TK_COLUMN: cursor number of table holding column
** TK_REGISTER: register number
** TK_TRIGGER: 1 -> new, 0 -> old
- ** EP_Unlikely: 134217728 times likelihood */
+ ** EP_Unlikely: 134217728 times likelihood
+ ** TK_SELECT: 1st register of result vector */
ynVar iColumn; /* TK_COLUMN: column index. -1 for rowid.
- ** TK_VARIABLE: variable number (always >= 1). */
+ ** TK_VARIABLE: variable number (always >= 1).
+ ** TK_SELECT_COLUMN: column of the result vector */
i16 iAgg; /* Which entry in pAggInfo->aCol[] or ->aFunc[] */
i16 iRightJoinTable; /* If EP_FromJoin, the right table of the join */
u8 op2; /* TK_REGISTER: original value of Expr.op
#define EP_CanBeNull 0x100000 /* Can be null despite NOT NULL constraint */
#define EP_Subquery 0x200000 /* Tree contains a TK_SELECT operator */
#define EP_Alias 0x400000 /* Is an alias for a result set column */
+#define EP_Leaf 0x800000 /* Expr.pLeft, .pRight, .u.pSelect all NULL */
/*
** Combinations of two or more EP_* flags
#define EP_Propagate (EP_Collate|EP_Subquery) /* Propagate these bits up tree */
/*
-** These macros can be used to test, set, or clear bits in the
+** These macros can be used to test, set, or clear bits in the
** Expr.flags field.
*/
#define ExprHasProperty(E,P) (((E)->flags&(P))!=0)
#endif
/*
-** Macros to determine the number of bytes required by a normal Expr
-** struct, an Expr struct with the EP_Reduced flag set in Expr.flags
+** Macros to determine the number of bytes required by a normal Expr
+** struct, an Expr struct with the EP_Reduced flag set in Expr.flags
** and an Expr struct with the EP_TokenOnly flag set.
*/
#define EXPR_FULLSIZE sizeof(Expr) /* Full size */
#define EXPR_TOKENONLYSIZE offsetof(Expr,pLeft) /* Fewer features */
/*
-** Flags passed to the sqlite3ExprDup() function. See the header comment
+** Flags passed to the sqlite3ExprDup() function. See the header comment
** above sqlite3ExprDup() for details.
*/
#define EXPRDUP_REDUCE 0x0001 /* Used reduced-size Expr nodes */
** tables in a join to 32 instead of 64. But it also reduces the size
** of the library by 738 bytes on ix86.
*/
-typedef u64 Bitmask;
+#ifdef SQLITE_BITMASK_TYPE
+ typedef SQLITE_BITMASK_TYPE Bitmask;
+#else
+ typedef u64 Bitmask;
+#endif
/*
** The number of bits in a Bitmask. "BMS" means "BitMask Size".
*/
#define MASKBIT(n) (((Bitmask)1)<<(n))
#define MASKBIT32(n) (((unsigned int)1)<<(n))
+#define ALLBITS ((Bitmask)-1)
/*
** The following structure describes the FROM clause of a SELECT statement.
int regReturn; /* Register holding return address of addrFillSub */
int regResult; /* Registers holding results of a co-routine */
struct {
- u8 jointype; /* Type of join between this able and the previous */
+ u8 jointype; /* Type of join between this table and the previous */
unsigned notIndexed :1; /* True if there is a NOT INDEXED clause */
unsigned isIndexedBy :1; /* True if there is an INDEXED BY clause */
unsigned isTabFunc :1; /* True if table-valued-function syntax */
/*
** Flags appropriate for the wctrlFlags parameter of sqlite3WhereBegin()
** and the WhereInfo.wctrlFlags member.
+**
+** Value constraints (enforced via assert()):
+** WHERE_USE_LIMIT == SF_FixedLimit
*/
#define WHERE_ORDERBY_NORMAL 0x0000 /* No-op */
#define WHERE_ORDERBY_MIN 0x0001 /* ORDER BY processing for min() func */
#define WHERE_ORDERBY_MAX 0x0002 /* ORDER BY processing for max() func */
#define WHERE_ONEPASS_DESIRED 0x0004 /* Want to do one-pass UPDATE/DELETE */
-#define WHERE_DUPLICATES_OK 0x0008 /* Ok to return a row more than once */
-#define WHERE_OMIT_OPEN_CLOSE 0x0010 /* Table cursors are already open */
-#define WHERE_FORCE_TABLE 0x0020 /* Do not use an index-only search */
-#define WHERE_ONETABLE_ONLY 0x0040 /* Only code the 1st table in pTabList */
-#define WHERE_NO_AUTOINDEX 0x0080 /* Disallow automatic indexes */
-#define WHERE_GROUPBY 0x0100 /* pOrderBy is really a GROUP BY */
-#define WHERE_DISTINCTBY 0x0200 /* pOrderby is really a DISTINCT clause */
-#define WHERE_WANT_DISTINCT 0x0400 /* All output needs to be distinct */
-#define WHERE_SORTBYGROUP 0x0800 /* Support sqlite3WhereIsSorted() */
-#define WHERE_REOPEN_IDX 0x1000 /* Try to use OP_ReopenIdx */
-#define WHERE_ONEPASS_MULTIROW 0x2000 /* ONEPASS is ok with multiple rows */
+#define WHERE_ONEPASS_MULTIROW 0x0008 /* ONEPASS is ok with multiple rows */
+#define WHERE_DUPLICATES_OK 0x0010 /* Ok to return a row more than once */
+#define WHERE_OR_SUBCLAUSE 0x0020 /* Processing a sub-WHERE as part of
+ ** the OR optimization */
+#define WHERE_GROUPBY 0x0040 /* pOrderBy is really a GROUP BY */
+#define WHERE_DISTINCTBY 0x0080 /* pOrderby is really a DISTINCT clause */
+#define WHERE_WANT_DISTINCT 0x0100 /* All output needs to be distinct */
+#define WHERE_SORTBYGROUP 0x0200 /* Support sqlite3WhereIsSorted() */
+#define WHERE_SEEK_TABLE 0x0400 /* Do not defer seeks on main table */
+#define WHERE_ORDERBY_LIMIT 0x0800 /* ORDERBY+LIMIT on the inner loop */
+ /* 0x1000 not currently used */
+ /* 0x2000 not currently used */
+#define WHERE_USE_LIMIT 0x4000 /* Use the LIMIT in cost estimates */
+ /* 0x8000 not currently used */
/* Allowed return values from sqlite3WhereIsDistinct()
*/
** pEList corresponds to the result set of a SELECT and is NULL for
** other statements.
**
-** NameContexts can be nested. When resolving names, the inner-most
+** NameContexts can be nested. When resolving names, the inner-most
** context is searched first. If no match is found, the next outer
** context is checked. If there is still no match, the next context
** is checked. This process continues until either a match is found
** or all contexts are check. When a match is found, the nRef member of
-** the context containing the match is incremented.
+** the context containing the match is incremented.
**
** Each subquery gets a new NameContext. The pNext field points to the
** NameContext in the parent query. Thus the process of scanning the
/*
** Allowed values for the NameContext, ncFlags field.
**
-** Note: NC_MinMaxAgg must have the same value as SF_MinMaxAgg and
-** SQLITE_FUNC_MINMAX.
-**
+** Value constraints (all checked via assert()):
+** NC_HasAgg == SF_HasAgg
+** NC_MinMaxAgg == SF_MinMaxAgg == SQLITE_FUNC_MINMAX
+**
*/
#define NC_AllowAgg 0x0001 /* Aggregate functions are allowed here */
-#define NC_HasAgg 0x0002 /* One or more aggregate functions seen */
+#define NC_PartIdx 0x0002 /* True if resolving a partial index WHERE */
#define NC_IsCheck 0x0004 /* True if resolving names in a CHECK constraint */
#define NC_InAggFunc 0x0008 /* True if analyzing arguments to an agg func */
-#define NC_PartIdx 0x0010 /* True if resolving a partial index WHERE */
+#define NC_HasAgg 0x0010 /* One or more aggregate functions seen */
#define NC_IdxExpr 0x0020 /* True if resolving columns of CREATE INDEX */
+#define NC_VarSelect 0x0040 /* A correlated subquery has been seen */
#define NC_MinMaxAgg 0x1000 /* min/max aggregates seen. See note above */
/*
struct Select {
ExprList *pEList; /* The fields of the result */
u8 op; /* One of: TK_UNION TK_ALL TK_INTERSECT TK_EXCEPT */
- u16 selFlags; /* Various SF_* values */
+ LogEst nSelectRow; /* Estimated number of result rows */
+ u32 selFlags; /* Various SF_* values */
int iLimit, iOffset; /* Memory registers holding LIMIT & OFFSET counters */
#if SELECTTRACE_ENABLED
char zSelName[12]; /* Symbolic name of this SELECT use for debugging */
#endif
int addrOpenEphm[2]; /* OP_OpenEphem opcodes related to this select */
- u64 nSelectRow; /* Estimated number of result rows */
SrcList *pSrc; /* The FROM clause */
Expr *pWhere; /* The WHERE clause */
ExprList *pGroupBy; /* The GROUP BY clause */
/*
** Allowed values for Select.selFlags. The "SF" prefix stands for
** "Select Flag".
-*/
-#define SF_Distinct 0x0001 /* Output should be DISTINCT */
-#define SF_All 0x0002 /* Includes the ALL keyword */
-#define SF_Resolved 0x0004 /* Identifiers have been resolved */
-#define SF_Aggregate 0x0008 /* Contains aggregate functions */
-#define SF_UsesEphemeral 0x0010 /* Uses the OpenEphemeral opcode */
-#define SF_Expanded 0x0020 /* sqlite3SelectExpand() called on this */
-#define SF_HasTypeInfo 0x0040 /* FROM subqueries have Table metadata */
-#define SF_Compound 0x0080 /* Part of a compound query */
-#define SF_Values 0x0100 /* Synthesized from VALUES clause */
-#define SF_MultiValue 0x0200 /* Single VALUES term with multiple rows */
-#define SF_NestedFrom 0x0400 /* Part of a parenthesized FROM clause */
-#define SF_MaybeConvert 0x0800 /* Need convertCompoundSelectToSubquery() */
-#define SF_MinMaxAgg 0x1000 /* Aggregate containing min() or max() */
-#define SF_Recursive 0x2000 /* The recursive part of a recursive CTE */
-#define SF_Converted 0x4000 /* By convertCompoundSelectToSubquery() */
-#define SF_IncludeHidden 0x8000 /* Include hidden columns in output */
+**
+** Value constraints (all checked via assert())
+** SF_HasAgg == NC_HasAgg
+** SF_MinMaxAgg == NC_MinMaxAgg == SQLITE_FUNC_MINMAX
+** SF_FixedLimit == WHERE_USE_LIMIT
+*/
+#define SF_Distinct 0x00001 /* Output should be DISTINCT */
+#define SF_All 0x00002 /* Includes the ALL keyword */
+#define SF_Resolved 0x00004 /* Identifiers have been resolved */
+#define SF_Aggregate 0x00008 /* Contains agg functions or a GROUP BY */
+#define SF_HasAgg 0x00010 /* Contains aggregate functions */
+#define SF_UsesEphemeral 0x00020 /* Uses the OpenEphemeral opcode */
+#define SF_Expanded 0x00040 /* sqlite3SelectExpand() called on this */
+#define SF_HasTypeInfo 0x00080 /* FROM subqueries have Table metadata */
+#define SF_Compound 0x00100 /* Part of a compound query */
+#define SF_Values 0x00200 /* Synthesized from VALUES clause */
+#define SF_MultiValue 0x00400 /* Single VALUES term with multiple rows */
+#define SF_NestedFrom 0x00800 /* Part of a parenthesized FROM clause */
+#define SF_MinMaxAgg 0x01000 /* Aggregate containing min() or max() */
+#define SF_Recursive 0x02000 /* The recursive part of a recursive CTE */
+#define SF_FixedLimit 0x04000 /* nSelectRow set by a constant LIMIT */
+#define SF_MaybeConvert 0x08000 /* Need convertCompoundSelectToSubquery() */
+#define SF_Converted 0x10000 /* By convertCompoundSelectToSubquery() */
+#define SF_IncludeHidden 0x20000 /* Include hidden columns in output */
/*
** by one of the following macros. The "SRT" prefix means "SELECT Result
** Type".
**
-** SRT_Union Store results as a key in a temporary index
+** SRT_Union Store results as a key in a temporary index
** identified by pDest->iSDParm.
**
** SRT_Except Remove results from the temporary index pDest->iSDParm.
** of the query. This destination implies "LIMIT 1".
**
** SRT_Set The result must be a single column. Store each
-** row of result as the key in table pDest->iSDParm.
+** row of result as the key in table pDest->iSDParm.
** Apply the affinity pDest->affSdst before storing
** results. Used to implement "IN (SELECT ...)".
**
*/
struct SelectDest {
u8 eDest; /* How to dispose of the results. On of SRT_* above. */
- char affSdst; /* Affinity used when eDest==SRT_Set */
+ char *zAffSdst; /* Affinity used when eDest==SRT_Set */
int iSDParm; /* A parameter used by the eDest disposal method */
int iSdst; /* Base register where results are written */
int nSdst; /* Number of registers allocated */
};
/*
-** During code generation of statements that do inserts into AUTOINCREMENT
+** During code generation of statements that do inserts into AUTOINCREMENT
** tables, the following information is attached to the Table.u.autoInc.p
** pointer of each autoincrement table to record some side information that
** the code generator needs. We have to keep per-table autoincrement
#endif
/*
-** At least one instance of the following structure is created for each
+** At least one instance of the following structure is created for each
** trigger that may be fired while parsing an INSERT, UPDATE or DELETE
** statement. All such objects are stored in the linked list headed at
** Parse.pTriggerPrg and deleted once statement compilation has been
** values for both pTrigger and orconf.
**
** The TriggerPrg.aColmask[0] variable is set to a mask of old.* columns
-** accessed (or set to 0 for triggers fired as a result of INSERT
+** accessed (or set to 0 for triggers fired as a result of INSERT
** statements). Similarly, the TriggerPrg.aColmask[1] variable is set to
** a mask of new.* columns used by the program.
*/
** is constant but the second part is reset at the beginning and end of
** each recursion.
**
-** The nTableLock and aTableLock variables are only used if the shared-cache
+** The nTableLock and aTableLock variables are only used if the shared-cache
** feature is enabled (if sqlite3Tsd()->useSharedData is true). They are
** used to store the set of table-locks required by the statement being
** compiled. Function sqlite3TableLock() is used to add entries to the
u8 hasCompound; /* Need to invoke convertCompoundSelectToSubquery() */
u8 okConstFactor; /* OK to factor out constants */
u8 disableLookaside; /* Number of times lookaside has been disabled */
- int aTempReg[8]; /* Holding area for temporary registers */
+ u8 nColCache; /* Number of entries in aColCache[] */
int nRangeReg; /* Size of the temporary register block */
int iRangeReg; /* First register in temporary register block */
int nErr; /* Number of errors seen */
int nTab; /* Number of previously allocated VDBE cursors */
int nMem; /* Number of memory cells used so far */
- int nSet; /* Number of sets used so far */
- int nOnce; /* Number of OP_Once instructions so far */
int nOpAlloc; /* Number of slots allocated for Vdbe.aOp[] */
int szOpAlloc; /* Bytes of memory space allocated for Vdbe.aOp[] */
- int iFixedOp; /* Never back out opcodes iFixedOp-1 or earlier */
int ckBase; /* Base register of data during check constraints */
int iSelfTab; /* Table of an index whose exprs are being coded */
int iCacheLevel; /* ColCache valid when aColCache[].iLevel<=iCacheLevel */
int iCacheCnt; /* Counter used to generate aColCache[].lru values */
int nLabel; /* Number of labels used */
int *aLabel; /* Space to hold the labels */
- struct yColCache {
- int iTable; /* Table cursor number */
- i16 iColumn; /* Table column number */
- u8 tempReg; /* iReg is a temp register that needs to be freed */
- int iLevel; /* Nesting level */
- int iReg; /* Reg with value of this column. 0 means none. */
- int lru; /* Least recently used entry has the smallest value */
- } aColCache[SQLITE_N_COLCACHE]; /* One for each column cache entry */
ExprList *pConstExpr;/* Constant expressions */
Token constraintName;/* Name of the constraint currently being parsed */
yDbMask writeMask; /* Start a write transaction on these databases */
yDbMask cookieMask; /* Bitmask of schema verified databases */
- int cookieValue[SQLITE_MAX_ATTACHED+2]; /* Values of cookies to verify */
int regRowid; /* Register holding rowid of CREATE TABLE entry */
int regRoot; /* Register holding root page number for new objects */
int nMaxArg; /* Max args passed to user function by sub-program */
TableLock *aTableLock; /* Required table locks for shared-cache mode */
#endif
AutoincInfo *pAinc; /* Information about AUTOINCREMENT counters */
-
- /* Information used while coding trigger programs. */
Parse *pToplevel; /* Parse structure for main program (or NULL) */
Table *pTriggerTab; /* Table triggers are being coded for */
int addrCrTab; /* Address of OP_CreateTable opcode on CREATE TABLE */
u8 eOrconf; /* Default ON CONFLICT policy for trigger steps */
u8 disableTriggers; /* True to disable triggers */
+ /**************************************************************************
+ ** Fields above must be initialized to zero. The fields that follow,
+ ** down to the beginning of the recursive section, do not need to be
+ ** initialized as they will be set before being used. The boundary is
+ ** determined by offsetof(Parse,aColCache).
+ **************************************************************************/
+
+ struct yColCache {
+ int iTable; /* Table cursor number */
+ i16 iColumn; /* Table column number */
+ u8 tempReg; /* iReg is a temp register that needs to be freed */
+ int iLevel; /* Nesting level */
+ int iReg; /* Reg with value of this column. 0 means none. */
+ int lru; /* Least recently used entry has the smallest value */
+ } aColCache[SQLITE_N_COLCACHE]; /* One for each column cache entry */
+ int aTempReg[8]; /* Holding area for temporary registers */
+ Token sNameToken; /* Token with unqualified schema object name */
+
/************************************************************************
** Above is constant between recursions. Below is reset before and after
** each recursion. The boundary between these two regions is determined
- ** using offsetof(Parse,nVar) so the nVar field must be the first field
- ** in the recursive region.
+ ** using offsetof(Parse,sLastToken) so the sLastToken field must be the
+ ** first field in the recursive region.
************************************************************************/
+ Token sLastToken; /* The last token parsed */
ynVar nVar; /* Number of '?' variables seen in the SQL so far */
int nzVar; /* Number of available slots in azVar[] */
u8 iPkSortOrder; /* ASC or DESC for INTEGER PRIMARY KEY */
u8 declareVtab; /* True if inside sqlite3_declare_vtab() */
int nVtabLock; /* Number of virtual tables to lock */
#endif
- int nAlias; /* Number of aliased result set columns */
int nHeight; /* Expression tree height of current sub-select */
#ifndef SQLITE_OMIT_EXPLAIN
int iSelectId; /* ID of current select for EXPLAIN output */
Table *pNewTable; /* A table being constructed by CREATE TABLE */
Trigger *pNewTrigger; /* Trigger under construct by a CREATE TRIGGER */
const char *zAuthContext; /* The 6th parameter to db->xAuth callbacks */
- Token sNameToken; /* Token with unqualified schema object name */
- Token sLastToken; /* The last token parsed */
#ifndef SQLITE_OMIT_VIRTUALTABLE
Token sArg; /* Complete text of a module argument */
Table **apVtabLock; /* Pointer to virtual tables needing locking */
};
/*
+** Sizes and pointers of various parts of the Parse object.
+*/
+#define PARSE_HDR_SZ offsetof(Parse,aColCache) /* Recursive part w/o aColCache*/
+#define PARSE_RECURSE_SZ offsetof(Parse,sLastToken) /* Recursive part */
+#define PARSE_TAIL_SZ (sizeof(Parse)-PARSE_RECURSE_SZ) /* Non-recursive part */
+#define PARSE_TAIL(X) (((char*)(X))+PARSE_RECURSE_SZ) /* Pointer to tail */
+
+/*
** Return true if currently inside an sqlite3_declare_vtab() call.
*/
#ifdef SQLITE_OMIT_VIRTUALTABLE
/*
** Bitfield flags for P5 value in various opcodes.
+**
+** Value constraints (enforced via assert()):
+** OPFLAG_LENGTHARG == SQLITE_FUNC_LENGTH
+** OPFLAG_TYPEOFARG == SQLITE_FUNC_TYPEOF
+** OPFLAG_BULKCSR == BTREE_BULKLOAD
+** OPFLAG_SEEKEQ == BTREE_SEEK_EQ
+** OPFLAG_FORDELETE == BTREE_FORDELETE
+** OPFLAG_SAVEPOSITION == BTREE_SAVEPOSITION
+** OPFLAG_AUXDELETE == BTREE_AUXDELETE
*/
#define OPFLAG_NCHANGE 0x01 /* OP_Insert: Set to update db->nChange */
/* Also used in P2 (not P5) of OP_Delete */
#define OPFLAG_ISUPDATE 0x04 /* This OP_Insert is an sql UPDATE */
#define OPFLAG_APPEND 0x08 /* This is likely to be an append */
#define OPFLAG_USESEEKRESULT 0x10 /* Try to avoid a seek in BtreeInsert() */
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+#define OPFLAG_ISNOOP 0x40 /* OP_Delete does pre-update-hook only */
+#endif
#define OPFLAG_LENGTHARG 0x40 /* OP_Column only used for length() */
#define OPFLAG_TYPEOFARG 0x80 /* OP_Column only used for typeof() */
#define OPFLAG_BULKCSR 0x01 /* OP_Open** used to open bulk cursor */
/*
* Each trigger present in the database schema is stored as an instance of
- * struct Trigger.
+ * struct Trigger.
*
* Pointers to instances of struct Trigger are stored in two ways.
- * 1. In the "trigHash" hash table (part of the sqlite3* that represents the
+ * 1. In the "trigHash" hash table (part of the sqlite3* that represents the
* database). This allows Trigger structures to be retrieved by name.
* 2. All triggers associated with a single table form a linked list, using the
* pNext member of struct Trigger. A pointer to the first element of the
/*
** A trigger is either a BEFORE or an AFTER trigger. The following constants
-** determine which.
+** determine which.
**
** If there are multiple triggers, you might of some BEFORE and some AFTER.
** In that cases, the constants below can be ORed together.
/*
* An instance of struct TriggerStep is used to store a single SQL statement
- * that is a part of a trigger-program.
+ * that is a part of a trigger-program.
*
* Instances of struct TriggerStep are stored in a singly linked list (linked
- * using the "pNext" member) referenced by the "step_list" member of the
+ * using the "pNext" member) referenced by the "step_list" member of the
* associated struct Trigger instance. The first element of the linked list is
* the first step of the trigger-program.
- *
+ *
* The "op" member indicates whether this is a "DELETE", "INSERT", "UPDATE" or
- * "SELECT" statement. The meanings of the other members is determined by the
+ * "SELECT" statement. The meanings of the other members is determined by the
* value of "op" as follows:
*
* (op == TK_INSERT)
* zTarget -> Dequoted name of the table to insert into.
* pExprList -> If this is an INSERT INTO ... VALUES ... statement, then
* this stores values to be inserted. Otherwise NULL.
- * pIdList -> If this is an INSERT INTO ... (<column-names>) VALUES ...
+ * pIdList -> If this is an INSERT INTO ... (<column-names>) VALUES ...
* statement, then this stores the column-names to be
* inserted into.
*
* zTarget -> Dequoted name of the table to delete from.
* pWhere -> The WHERE clause of the DELETE statement if one is specified.
* Otherwise NULL.
- *
+ *
* (op == TK_UPDATE)
* zTarget -> Dequoted name of the table to update.
* pWhere -> The WHERE clause of the UPDATE statement if one is specified.
* pExprList -> A list of the columns to update and the expressions to update
* them to. See sqlite3Update() documentation of "pChanges"
* argument.
- *
+ *
*/
struct TriggerStep {
u8 op; /* One of TK_DELETE, TK_UPDATE, TK_INSERT, TK_SELECT */
/*
** The following structure contains information used by the sqliteFix...
** routines as they walk the parse tree to make database references
-** explicit.
+** explicit.
*/
typedef struct DbFixer DbFixer;
struct DbFixer {
int neverCorrupt; /* Database is always well-formed */
int szLookaside; /* Default lookaside buffer size */
int nLookaside; /* Default lookaside buffer count */
+ int nStmtSpill; /* Stmt-journal spill-to-disk threshold */
sqlite3_mem_methods m; /* Low-level memory allocation interface */
sqlite3_mutex_methods mutex; /* Low-level mutex interface */
sqlite3_pcache_methods2 pcache2; /* Low-level page-cache interface */
int (*xTestCallback)(int); /* Invoked by sqlite3FaultSim() */
#endif
int bLocaltimeFault; /* True to fail localtime() calls */
+ int iOnceResetThreshold; /* When to reset OP_Once counters */
};
/*
struct SrcCount *pSrcCount; /* Counting column references */
struct CCurHint *pCCurHint; /* Used by codeCursorHint() */
int *aiCol; /* array of column indexes */
+ struct IdxCover *pIdxCover; /* Check for index coverage */
} u;
};
#define SQLITE_CORRUPT_BKPT sqlite3CorruptError(__LINE__)
#define SQLITE_MISUSE_BKPT sqlite3MisuseError(__LINE__)
#define SQLITE_CANTOPEN_BKPT sqlite3CantopenError(__LINE__)
+#ifdef SQLITE_DEBUG
+SQLITE_PRIVATE int sqlite3NomemError(int);
+SQLITE_PRIVATE int sqlite3IoerrnomemError(int);
+# define SQLITE_NOMEM_BKPT sqlite3NomemError(__LINE__)
+# define SQLITE_IOERR_NOMEM_BKPT sqlite3IoerrnomemError(__LINE__)
+#else
+# define SQLITE_NOMEM_BKPT SQLITE_NOMEM
+# define SQLITE_IOERR_NOMEM_BKPT SQLITE_IOERR_NOMEM
+#endif
/*
** FTS3 and FTS4 both require virtual table support
# define sqlite3Isdigit(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x04)
# define sqlite3Isxdigit(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x08)
# define sqlite3Tolower(x) (sqlite3UpperToLower[(unsigned char)(x)])
+# define sqlite3Isquote(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x80)
#else
# define sqlite3Toupper(x) toupper((unsigned char)(x))
# define sqlite3Isspace(x) isspace((unsigned char)(x))
# define sqlite3Isdigit(x) isdigit((unsigned char)(x))
# define sqlite3Isxdigit(x) isxdigit((unsigned char)(x))
# define sqlite3Tolower(x) tolower((unsigned char)(x))
+# define sqlite3Isquote(x) ((x)=='"'||(x)=='\''||(x)=='['||(x)=='`')
#endif
#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
SQLITE_PRIVATE int sqlite3IsIdChar(u8);
/*
** Internal function prototypes
*/
-#define sqlite3StrICmp sqlite3_stricmp
+SQLITE_PRIVATE int sqlite3StrICmp(const char*,const char*);
SQLITE_PRIVATE int sqlite3Strlen30(const char*);
+SQLITE_PRIVATE char *sqlite3ColumnType(Column*,char*);
#define sqlite3StrNICmp sqlite3_strnicmp
SQLITE_PRIVATE int sqlite3MallocInit(void);
#ifdef SQLITE_USE_ALLOCA
# define sqlite3StackAllocRaw(D,N) alloca(N)
# define sqlite3StackAllocZero(D,N) memset(alloca(N), 0, N)
-# define sqlite3StackFree(D,P)
+# define sqlite3StackFree(D,P)
#else
# define sqlite3StackAllocRaw(D,N) sqlite3DbMallocRaw(D,N)
# define sqlite3StackAllocZero(D,N) sqlite3DbMallocZero(D,N)
# define sqlite3StackFree(D,P) sqlite3DbFree(D,P)
#endif
-#ifdef SQLITE_ENABLE_MEMSYS3
-SQLITE_PRIVATE const sqlite3_mem_methods *sqlite3MemGetMemsys3(void);
-#endif
+/* Do not allow both MEMSYS5 and MEMSYS3 to be defined together. If they
+** are, disable MEMSYS3
+*/
#ifdef SQLITE_ENABLE_MEMSYS5
SQLITE_PRIVATE const sqlite3_mem_methods *sqlite3MemGetMemsys5(void);
+#undef SQLITE_ENABLE_MEMSYS3
+#endif
+#ifdef SQLITE_ENABLE_MEMSYS3
+SQLITE_PRIVATE const sqlite3_mem_methods *sqlite3MemGetMemsys3(void);
#endif
#if defined(SQLITE_DEBUG)
SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView*, const Expr*, u8);
+SQLITE_PRIVATE void sqlite3TreeViewBareExprList(TreeView*, const ExprList*, const char*);
SQLITE_PRIVATE void sqlite3TreeViewExprList(TreeView*, const ExprList*, u8, const char*);
SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView*, const Select*, u8);
SQLITE_PRIVATE void sqlite3TreeViewWith(TreeView*, const With*, u8);
SQLITE_PRIVATE void sqlite3SetString(char **, sqlite3*, const char*);
SQLITE_PRIVATE void sqlite3ErrorMsg(Parse*, const char*, ...);
-SQLITE_PRIVATE int sqlite3Dequote(char*);
+SQLITE_PRIVATE void sqlite3Dequote(char*);
SQLITE_PRIVATE void sqlite3TokenInit(Token*,char*);
SQLITE_PRIVATE int sqlite3KeywordCode(const unsigned char*, int);
SQLITE_PRIVATE int sqlite3RunParser(Parse*, const char*, char **);
SQLITE_PRIVATE int sqlite3GetTempRange(Parse*,int);
SQLITE_PRIVATE void sqlite3ReleaseTempRange(Parse*,int,int);
SQLITE_PRIVATE void sqlite3ClearTempRegCache(Parse*);
+#ifdef SQLITE_DEBUG
+SQLITE_PRIVATE int sqlite3NoTempsInRange(Parse*,int,int);
+#endif
SQLITE_PRIVATE Expr *sqlite3ExprAlloc(sqlite3*,int,const Token*,int);
SQLITE_PRIVATE Expr *sqlite3Expr(sqlite3*,int,const char*);
SQLITE_PRIVATE void sqlite3ExprAttachSubtrees(sqlite3*,Expr*,Expr*,Expr*);
SQLITE_PRIVATE Expr *sqlite3PExpr(Parse*, int, Expr*, Expr*, const Token*);
+SQLITE_PRIVATE void sqlite3PExprAddSelect(Parse*, Expr*, Select*);
SQLITE_PRIVATE Expr *sqlite3ExprAnd(sqlite3*,Expr*, Expr*);
SQLITE_PRIVATE Expr *sqlite3ExprFunction(Parse*,ExprList*, Token*);
-SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse*, Expr*);
+SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse*, Expr*, u32);
SQLITE_PRIVATE void sqlite3ExprDelete(sqlite3*, Expr*);
SQLITE_PRIVATE ExprList *sqlite3ExprListAppend(Parse*,ExprList*,Expr*);
+SQLITE_PRIVATE ExprList *sqlite3ExprListAppendVector(Parse*,ExprList*,IdList*,Expr*);
SQLITE_PRIVATE void sqlite3ExprListSetSortOrder(ExprList*,int);
SQLITE_PRIVATE void sqlite3ExprListSetName(Parse*,ExprList*,Token*,int);
SQLITE_PRIVATE void sqlite3ExprListSetSpan(Parse*,ExprList*,ExprSpan*);
SQLITE_PRIVATE void sqlite3CommitInternalChanges(sqlite3*);
SQLITE_PRIVATE void sqlite3DeleteColumnNames(sqlite3*,Table*);
SQLITE_PRIVATE int sqlite3ColumnsFromExprList(Parse*,ExprList*,i16*,Column**);
+SQLITE_PRIVATE void sqlite3SelectAddColumnTypeAndCollation(Parse*,Table*,Select*);
SQLITE_PRIVATE Table *sqlite3ResultSetOfSelect(Parse*,Select*);
SQLITE_PRIVATE void sqlite3OpenMasterTable(Parse *, int);
SQLITE_PRIVATE Index *sqlite3PrimaryKeyIndex(Table*);
#else
# define sqlite3ColumnPropertiesFromName(T,C) /* no-op */
#endif
-SQLITE_PRIVATE void sqlite3AddColumn(Parse*,Token*);
+SQLITE_PRIVATE void sqlite3AddColumn(Parse*,Token*,Token*);
SQLITE_PRIVATE void sqlite3AddNotNull(Parse*, int);
SQLITE_PRIVATE void sqlite3AddPrimaryKey(Parse*, ExprList*, int, int, int);
SQLITE_PRIVATE void sqlite3AddCheckConstraint(Parse*, Expr*);
-SQLITE_PRIVATE void sqlite3AddColumnType(Parse*,Token*);
SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse*,ExprSpan*);
SQLITE_PRIVATE void sqlite3AddCollateType(Parse*, Token*);
SQLITE_PRIVATE void sqlite3EndTable(Parse*,Token*,Token*,u8,Select*);
SQLITE_PRIVATE int sqlite3ParseUri(const char*,const char*,unsigned int*,
sqlite3_vfs**,char**,char **);
SQLITE_PRIVATE Btree *sqlite3DbNameToBtree(sqlite3*,const char*);
-SQLITE_PRIVATE int sqlite3CodeOnce(Parse *);
#ifdef SQLITE_OMIT_BUILTIN_TEST
# define sqlite3FaultSim(X) SQLITE_OK
SQLITE_PRIVATE void sqlite3IdListDelete(sqlite3*, IdList*);
SQLITE_PRIVATE void sqlite3SrcListDelete(sqlite3*, SrcList*);
SQLITE_PRIVATE Index *sqlite3AllocateIndexObject(sqlite3*,i16,int,char**);
-SQLITE_PRIVATE Index *sqlite3CreateIndex(Parse*,Token*,Token*,SrcList*,ExprList*,int,Token*,
- Expr*, int, int);
+SQLITE_PRIVATE void sqlite3CreateIndex(Parse*,Token*,Token*,SrcList*,ExprList*,int,Token*,
+ Expr*, int, int, u8);
SQLITE_PRIVATE void sqlite3DropIndex(Parse*, SrcList*, int);
SQLITE_PRIVATE int sqlite3Select(Parse*, Select*, SelectDest*);
SQLITE_PRIVATE Select *sqlite3SelectNew(Parse*,ExprList*,SrcList*,Expr*,ExprList*,
- Expr*,ExprList*,u16,Expr*,Expr*);
+ Expr*,ExprList*,u32,Expr*,Expr*);
SQLITE_PRIVATE void sqlite3SelectDelete(sqlite3*, Select*);
SQLITE_PRIVATE Table *sqlite3SrcListLookup(Parse*, SrcList*);
SQLITE_PRIVATE int sqlite3IsReadOnly(Parse*, Table*, int);
SQLITE_PRIVATE void sqlite3Update(Parse*, SrcList*, ExprList*, Expr*, int);
SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin(Parse*,SrcList*,Expr*,ExprList*,ExprList*,u16,int);
SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo*);
-SQLITE_PRIVATE u64 sqlite3WhereOutputRowCount(WhereInfo*);
+SQLITE_PRIVATE LogEst sqlite3WhereOutputRowCount(WhereInfo*);
SQLITE_PRIVATE int sqlite3WhereIsDistinct(WhereInfo*);
SQLITE_PRIVATE int sqlite3WhereIsOrdered(WhereInfo*);
+SQLITE_PRIVATE int sqlite3WhereOrderedInnerLoop(WhereInfo*);
SQLITE_PRIVATE int sqlite3WhereIsSorted(WhereInfo*);
SQLITE_PRIVATE int sqlite3WhereContinueLabel(WhereInfo*);
SQLITE_PRIVATE int sqlite3WhereBreakLabel(WhereInfo*);
SQLITE_PRIVATE void sqlite3ExprIfFalse(Parse*, Expr*, int, int);
SQLITE_PRIVATE void sqlite3ExprIfFalseDup(Parse*, Expr*, int, int);
SQLITE_PRIVATE Table *sqlite3FindTable(sqlite3*,const char*, const char*);
-SQLITE_PRIVATE Table *sqlite3LocateTable(Parse*,int isView,const char*, const char*);
-SQLITE_PRIVATE Table *sqlite3LocateTableItem(Parse*,int isView,struct SrcList_item *);
+#define LOCATE_VIEW 0x01
+#define LOCATE_NOERR 0x02
+SQLITE_PRIVATE Table *sqlite3LocateTable(Parse*,u32 flags,const char*, const char*);
+SQLITE_PRIVATE Table *sqlite3LocateTableItem(Parse*,u32 flags,struct SrcList_item *);
SQLITE_PRIVATE Index *sqlite3FindIndex(sqlite3*,const char*, const char*);
SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTable(sqlite3*,int,const char*);
SQLITE_PRIVATE void sqlite3UnlinkAndDeleteIndex(sqlite3*,int,const char*);
-SQLITE_PRIVATE void sqlite3Vacuum(Parse*);
-SQLITE_PRIVATE int sqlite3RunVacuum(char**, sqlite3*);
+SQLITE_PRIVATE void sqlite3Vacuum(Parse*,Token*);
+SQLITE_PRIVATE int sqlite3RunVacuum(char**, sqlite3*, int);
SQLITE_PRIVATE char *sqlite3NameFromToken(sqlite3*, Token*);
SQLITE_PRIVATE int sqlite3ExprCompare(Expr*, Expr*, int);
SQLITE_PRIVATE int sqlite3ExprListCompare(ExprList*, ExprList*, int);
SQLITE_PRIVATE int sqlite3ExprImpliesExpr(Expr*, Expr*, int);
SQLITE_PRIVATE void sqlite3ExprAnalyzeAggregates(NameContext*, Expr*);
SQLITE_PRIVATE void sqlite3ExprAnalyzeAggList(NameContext*,ExprList*);
+SQLITE_PRIVATE int sqlite3ExprCoveredByIndex(Expr*, int iCur, Index *pIdx);
SQLITE_PRIVATE int sqlite3FunctionUsesThisSrc(Expr*, SrcList*);
SQLITE_PRIVATE Vdbe *sqlite3GetVdbe(Parse*);
#ifndef SQLITE_OMIT_BUILTIN_TEST
#else
# define sqlite3SelectSetName(A,B)
#endif
-SQLITE_PRIVATE void sqlite3FuncDefInsert(FuncDefHash*, FuncDef*);
-SQLITE_PRIVATE FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,int,u8,u8);
-SQLITE_PRIVATE void sqlite3RegisterBuiltinFunctions(sqlite3*);
+SQLITE_PRIVATE void sqlite3InsertBuiltinFuncs(FuncDef*,int);
+SQLITE_PRIVATE FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,u8,u8);
+SQLITE_PRIVATE void sqlite3RegisterBuiltinFunctions(void);
SQLITE_PRIVATE void sqlite3RegisterDateTimeFunctions(void);
-SQLITE_PRIVATE void sqlite3RegisterGlobalFunctions(void);
+SQLITE_PRIVATE void sqlite3RegisterPerConnectionBuiltinFunctions(sqlite3*);
SQLITE_PRIVATE int sqlite3SafetyCheckOk(sqlite3*);
SQLITE_PRIVATE int sqlite3SafetyCheckSickOrOk(sqlite3*);
SQLITE_PRIVATE void sqlite3ChangeCookie(Parse*, int);
#ifndef SQLITE_OMIT_VIRTUALTABLE
SQLITE_PRIVATE LogEst sqlite3LogEstFromDouble(double);
#endif
+#if defined(SQLITE_ENABLE_STMT_SCANSTATUS) || \
+ defined(SQLITE_ENABLE_STAT3_OR_STAT4) || \
+ defined(SQLITE_EXPLAIN_ESTIMATED_ROWS)
SQLITE_PRIVATE u64 sqlite3LogEstToInt(LogEst);
+#endif
/*
** Routines to read and write variable-length integers. These used to
SQLITE_PRIVATE void sqlite3TableAffinity(Vdbe*, Table*, int);
SQLITE_PRIVATE char sqlite3CompareAffinity(Expr *pExpr, char aff2);
SQLITE_PRIVATE int sqlite3IndexAffinityOk(Expr *pExpr, char idx_affinity);
+SQLITE_PRIVATE char sqlite3TableColumnAffinity(Table*,int);
SQLITE_PRIVATE char sqlite3ExprAffinity(Expr *pExpr);
SQLITE_PRIVATE int sqlite3Atoi64(const char*, i64*, int, u8);
SQLITE_PRIVATE int sqlite3DecOrHexToI64(const char*, i64*);
SQLITE_PRIVATE void sqlite3ErrorWithMsg(sqlite3*, int, const char*,...);
SQLITE_PRIVATE void sqlite3Error(sqlite3*,int);
+SQLITE_PRIVATE void sqlite3SystemError(sqlite3*,int);
SQLITE_PRIVATE void *sqlite3HexToBlob(sqlite3*, const char *z, int n);
SQLITE_PRIVATE u8 sqlite3HexToInt(int h);
SQLITE_PRIVATE int sqlite3TwoPartName(Parse *, Token *, Token *, Token **);
SQLITE_PRIVATE const void *sqlite3ValueText(sqlite3_value*, u8);
SQLITE_PRIVATE int sqlite3ValueBytes(sqlite3_value*, u8);
-SQLITE_PRIVATE void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8,
+SQLITE_PRIVATE void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8,
void(*)(void*));
SQLITE_PRIVATE void sqlite3ValueSetNull(sqlite3_value*);
SQLITE_PRIVATE void sqlite3ValueFree(sqlite3_value*);
SQLITE_PRIVATE const unsigned char sqlite3CtypeMap[];
SQLITE_PRIVATE const Token sqlite3IntTokens[];
SQLITE_PRIVATE SQLITE_WSD struct Sqlite3Config sqlite3Config;
-SQLITE_PRIVATE SQLITE_WSD FuncDefHash sqlite3GlobalFunctions;
+SQLITE_PRIVATE FuncDefHash sqlite3BuiltinFunctions;
#ifndef SQLITE_OMIT_WSD
SQLITE_PRIVATE int sqlite3PendingByte;
#endif
SQLITE_PRIVATE int sqlite3GetToken(const unsigned char *, int *);
SQLITE_PRIVATE void sqlite3NestedParse(Parse*, const char*, ...);
SQLITE_PRIVATE void sqlite3ExpirePreparedStatements(sqlite3*);
-SQLITE_PRIVATE int sqlite3CodeSubselect(Parse *, Expr *, int, int);
+SQLITE_PRIVATE int sqlite3CodeSubselect(Parse*, Expr *, int, int);
SQLITE_PRIVATE void sqlite3SelectPrep(Parse*, Select*, NameContext*);
SQLITE_PRIVATE void sqlite3SelectWrongNumTermsError(Parse *pParse, Select *p);
SQLITE_PRIVATE int sqlite3MatchSpanName(const char*, const char*, const char*, const char*);
#ifdef SQLITE_DEBUG
SQLITE_PRIVATE int sqlite3KeyInfoIsWriteable(KeyInfo*);
#endif
-SQLITE_PRIVATE int sqlite3CreateFunc(sqlite3 *, const char *, int, int, void *,
+SQLITE_PRIVATE int sqlite3CreateFunc(sqlite3 *, const char *, int, int, void *,
void (*)(sqlite3_context*,int,sqlite3_value **),
void (*)(sqlite3_context*,int,sqlite3_value **), void (*)(sqlite3_context*),
FuncDestructor *pDestructor
SQLITE_PRIVATE void sqlite3BackupRestart(sqlite3_backup *);
SQLITE_PRIVATE void sqlite3BackupUpdate(sqlite3_backup *, Pgno, const u8 *);
+#ifndef SQLITE_OMIT_SUBQUERY
+SQLITE_PRIVATE int sqlite3ExprCheckIN(Parse*, Expr*);
+#else
+# define sqlite3ExprCheckIN(x,y) SQLITE_OK
+#endif
+
#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
SQLITE_PRIVATE void sqlite3AnalyzeFunctions(void);
-SQLITE_PRIVATE int sqlite3Stat4ProbeSetValue(Parse*,Index*,UnpackedRecord**,Expr*,u8,int,int*);
+SQLITE_PRIVATE int sqlite3Stat4ProbeSetValue(
+ Parse*,Index*,UnpackedRecord**,Expr*,int,int,int*);
SQLITE_PRIVATE int sqlite3Stat4ValueFromExpr(Parse*, Expr*, u8, sqlite3_value**);
SQLITE_PRIVATE void sqlite3Stat4ProbeFree(UnpackedRecord*);
SQLITE_PRIVATE int sqlite3Stat4Column(sqlite3*, const void*, int, int, sqlite3_value**);
+SQLITE_PRIVATE char sqlite3IndexColumnAffinity(sqlite3*, Index*, int);
#endif
/*
# define sqlite3VtabRollback(X)
# define sqlite3VtabCommit(X)
# define sqlite3VtabInSync(db) 0
-# define sqlite3VtabLock(X)
+# define sqlite3VtabLock(X)
# define sqlite3VtabUnlock(X)
# define sqlite3VtabUnlockList(X)
# define sqlite3VtabSavepoint(X, Y, Z) SQLITE_OK
** no-op macros if OMIT_FOREIGN_KEY is defined. In this case no foreign
** key functionality is available. If OMIT_TRIGGER is defined but
** OMIT_FOREIGN_KEY is not, only some of the functions are no-oped. In
-** this case foreign keys are parsed, but no other functionality is
+** this case foreign keys are parsed, but no other functionality is
** provided (enforcement of FK constraints requires the triggers sub-system).
*/
#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER)
#define IN_INDEX_NOOP_OK 0x0001 /* OK to return IN_INDEX_NOOP */
#define IN_INDEX_MEMBERSHIP 0x0002 /* IN operator used for membership test */
#define IN_INDEX_LOOP 0x0004 /* IN operator used as a loop */
-SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, u32, int*);
+SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, u32, int*, int*);
+SQLITE_PRIVATE int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
+SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *);
#ifdef SQLITE_ENABLE_ATOMIC_WRITE
-SQLITE_PRIVATE int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
-SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *);
SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *);
-SQLITE_PRIVATE int sqlite3JournalExists(sqlite3_file *p);
-#else
- #define sqlite3JournalSize(pVfs) ((pVfs)->szOsFile)
- #define sqlite3JournalExists(p) 1
#endif
+SQLITE_PRIVATE int sqlite3JournalIsInMemory(sqlite3_file *p);
SQLITE_PRIVATE void sqlite3MemJournalOpen(sqlite3_file *);
-SQLITE_PRIVATE int sqlite3MemJournalSize(void);
-SQLITE_PRIVATE int sqlite3IsMemJournal(sqlite3_file *);
SQLITE_PRIVATE void sqlite3ExprSetHeightAndFlags(Parse *pParse, Expr *p);
#if SQLITE_MAX_EXPR_DEPTH>0
/*
** If the SQLITE_ENABLE IOTRACE exists then the global variable
** sqlite3IoTrace is a pointer to a printf-like routine used to
-** print I/O tracing messages.
+** print I/O tracing messages.
*/
#ifdef SQLITE_ENABLE_IOTRACE
# define IOTRACE(A) if( sqlite3IoTrace ){ sqlite3IoTrace A; }
** that allocations that might have been satisfied by lookaside are not
** passed back to non-lookaside free() routines. Asserts such as the
** example above are placed on the non-lookaside free() routines to verify
-** this constraint.
+** this constraint.
**
** All of this is no-op for a production build. It only comes into
** play when the SQLITE_MEMDEBUG compile-time option is used.
SQLITE_PRIVATE int sqlite3DbstatRegister(sqlite3*);
#endif
-#endif /* _SQLITEINT_H_ */
+SQLITE_PRIVATE int sqlite3ExprVectorSize(Expr *pExpr);
+SQLITE_PRIVATE int sqlite3ExprIsVector(Expr *pExpr);
+SQLITE_PRIVATE Expr *sqlite3VectorFieldSubexpr(Expr*, int);
+SQLITE_PRIVATE Expr *sqlite3ExprForVectorField(Parse*,Expr*,int);
+
+#endif /* SQLITEINT_H */
/************** End of sqliteInt.h *******************************************/
/************** Begin file crypto.c ******************************************/
#ifndef CIPHER_VERSION
#ifdef SQLCIPHER_FIPS
-#define CIPHER_VERSION "3.4.0 FIPS"
+#define CIPHER_VERSION "3.4.1 FIPS"
#else
-#define CIPHER_VERSION "3.4.0"
+#define CIPHER_VERSION "3.4.1"
#endif
#endif
#endif
/* extensions defined in pager.c */
-SQLITE_PRIVATE void sqlite3pager_get_codec(Pager *pPager, void **ctx);
-SQLITE_PRIVATE int sqlite3pager_is_mj_pgno(Pager *pPager, Pgno pgno);
+SQLITE_API void sqlite3pager_get_codec(Pager *pPager, void **ctx);
+SQLITE_API int sqlite3pager_is_mj_pgno(Pager *pPager, Pgno pgno);
SQLITE_PRIVATE sqlite3_file *sqlite3Pager_get_fd(Pager *pPager);
-SQLITE_PRIVATE void sqlite3pager_sqlite3PagerSetCodec(
+SQLITE_API void sqlite3pager_sqlite3PagerSetCodec(
Pager *pPager,
void *(*xCodec)(void*,void*,Pgno,int),
void (*xCodecSizeChng)(void*,int,int),
void (*xCodecFree)(void*),
void *pCodec
);
-SQLITE_PRIVATE void sqlite3pager_sqlite3PagerSetError(Pager *pPager, int error);
+SQLITE_API void sqlite3pager_sqlite3PagerSetError(Pager *pPager, int error);
/* end extensions defined in pager.c */
/*
if( sqlite3StrICmp(zLeft, "cipher")==0 ){
if(ctx) {
if( zRight ) {
- sqlcipher_codec_ctx_set_cipher(ctx, zRight, 2); // change cipher for both
+ rc = sqlcipher_codec_ctx_set_cipher(ctx, zRight, 2); // change cipher for both
codec_vdbe_return_static_string(pParse, "cipher", pragma_cipher_deprecated_msg);
sqlite3_log(SQLITE_WARNING, pragma_cipher_deprecated_msg);
- return SQLITE_ERROR;
+ return rc;
}else {
codec_vdbe_return_static_string(pParse, "cipher",
sqlcipher_codec_ctx_get_cipher(ctx, 2));
/* point the internal codec argument against the contet to be prepared */
rc = sqlcipher_codec_ctx_init(&ctx, pDb, pDb->pBt->pBt->pPager, fd, zKey, nKey);
- if(rc != SQLITE_OK) return rc; /* initialization failed, do not attach potentially corrupted context */
+ if(rc != SQLITE_OK) {
+ /* initialization failed, do not attach potentially corrupted context */
+ sqlite3_mutex_leave(db->mutex);
+ return rc;
+ }
sqlite3pager_sqlite3PagerSetCodec(sqlite3BtreePager(pDb->pBt), sqlite3Codec, NULL, sqlite3FreeCodecArg, (void *) ctx);
return SQLITE_OK;
}
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_see(const char* in) {
+SQLITE_API void sqlite3_activate_see(const char* in) {
/* do nothing, security enhancements are always active */
}
}
for(db_index = 0; db_index < db->nDb; db_index++) {
struct Db *pDb = &db->aDb[db_index];
- if(strcmp(pDb->zName, zDb) == 0) {
+ if(strcmp(pDb->zDbSName, zDb) == 0) {
return db_index;
}
}
return 0;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_key(sqlite3 *db, const void *pKey, int nKey) {
+SQLITE_API int sqlite3_key(sqlite3 *db, const void *pKey, int nKey) {
CODEC_TRACE(("sqlite3_key entered: db=%p pKey=%s nKey=%d\n", db, (char *)pKey, nKey));
return sqlite3_key_v2(db, "main", pKey, nKey);
}
-SQLITE_API int SQLITE_STDCALL sqlite3_key_v2(sqlite3 *db, const char *zDb, const void *pKey, int nKey) {
+SQLITE_API int sqlite3_key_v2(sqlite3 *db, const char *zDb, const void *pKey, int nKey) {
CODEC_TRACE(("sqlite3_key_v2: entered db=%p zDb=%s pKey=%s nKey=%d\n", db, zDb, (char *)pKey, nKey));
/* attach key if db and pKey are not null and nKey is > 0 */
if(db && pKey && nKey) {
return SQLITE_ERROR;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey(sqlite3 *db, const void *pKey, int nKey) {
+SQLITE_API int sqlite3_rekey(sqlite3 *db, const void *pKey, int nKey) {
CODEC_TRACE(("sqlite3_rekey entered: db=%p pKey=%s nKey=%d\n", db, (char *)pKey, nKey));
return sqlite3_rekey_v2(db, "main", pKey, nKey);
}
** 2. If there is NOT already a key present do nothing
** 3. If there is a key present, re-encrypt the database with the new key
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey_v2(sqlite3 *db, const char *zDb, const void *pKey, int nKey) {
+SQLITE_API int sqlite3_rekey_v2(sqlite3 *db, const char *zDb, const void *pKey, int nKey) {
CODEC_TRACE(("sqlite3_rekey_v2: entered db=%p zDb=%s pKey=%s, nKey=%d\n", db, zDb, (char *)pKey, nKey));
if(db && pKey && nKey) {
int db_index = sqlcipher_find_db_index(db, zDb);
int saved_flags; /* Saved value of the db->flags */
int saved_nChange; /* Saved value of db->nChange */
int saved_nTotalChange; /* Saved value of db->nTotalChange */
- void (*saved_xTrace)(void*,const char*); /* Saved db->xTrace */
+ int (*saved_xTrace)(u32,void*,void*,void*); /* Saved db->xTrace */
int rc = SQLITE_OK; /* Return code from service routines */
char *zSql = NULL; /* SQL statements */
char *pzErrMsg = NULL;
static unsigned int default_flags = DEFAULT_CIPHER_FLAGS;
static unsigned char hmac_salt_mask = HMAC_SALT_MASK;
static int default_kdf_iter = PBKDF2_ITER;
-static int default_page_size = SQLITE_DEFAULT_PAGE_SIZE;
+static int default_page_size = 1024;
static unsigned int sqlcipher_activate_count = 0;
static sqlite3_mutex* sqlcipher_provider_mutex = NULL;
static sqlcipher_provider *default_provider = NULL;
cipher_ctx *c_ctx = for_ctx ? ctx->write_ctx : ctx->read_ctx;
int rc;
- c_ctx->provider->set_cipher(c_ctx->provider_ctx, cipher_name);
-
+ rc = c_ctx->provider->set_cipher(c_ctx->provider_ctx, cipher_name);
+ if(rc != SQLITE_OK){
+ sqlcipher_codec_ctx_set_error(ctx, rc);
+ return rc;
+ }
c_ctx->key_sz = c_ctx->provider->get_key_sz(c_ctx->provider_ctx);
c_ctx->iv_sz = c_ctx->provider->get_iv_sz(c_ctx->provider_ctx);
c_ctx->block_sz = c_ctx->provider->get_block_sz(c_ctx->provider_ctx);
int saved_flags;
int saved_nChange;
int saved_nTotalChange;
- void (*saved_xTrace)(void*,const char*);
+ int (*saved_xTrace)(u32,void*,void*,void*); /* Saved db->xTrace */
Db *pDb = 0;
sqlite3 *db = ctx->pBt->db;
const char *db_filename = sqlite3_db_filename(db, "main");
int sqlcipher_cipher_profile(sqlite3 *db, const char *destination){
FILE *f;
- if( strcmp(destination,"stdout")==0 ){
+ if(sqlite3StrICmp(destination, "stdout") == 0){
f = stdout;
- }else if( strcmp(destination, "stderr")==0 ){
+ }else if(sqlite3StrICmp(destination, "stderr") == 0){
f = stderr;
- }else if( strcmp(destination, "off")==0 ){
+ }else if(sqlite3StrICmp(destination, "off") == 0){
f = 0;
}else{
- f = fopen(destination, "wb");
- if( f==0 ){
- return SQLITE_ERROR;
- }
+#if defined(_WIN32) && (__STDC_VERSION__ > 199901L) || defined(SQLITE_OS_WINRT)
+ if(fopen_s(&f, destination, "a") != 0){
+#else
+ f = fopen(destination, "a");
+ if(f == 0){
+#endif
+ return SQLITE_ERROR;
+ }
+
}
sqlite3_profile(db, sqlcipher_profile_callback, f);
return SQLITE_OK;
static void sqlcipher_profile_callback(void *file, const char *sql, sqlite3_uint64 run_time){
FILE *f = (FILE*)file;
double elapsed = run_time/1000000.0;
- if( f ) fprintf(f, "Elapsed time:%.3f ms - %s\n", elapsed, sql);
+ if(f) fprintf(f, "Elapsed time:%.3f ms - %s\n", elapsed, sql);
}
int sqlcipher_codec_fips_status(codec_ctx *ctx) {
#include <openssl/rand.h>
#include <openssl/evp.h>
#include <openssl/hmac.h>
-#include <openssl/opensslv.h>
typedef struct {
EVP_CIPHER *evp_cipher;
static unsigned int openssl_init_count = 0;
static sqlite3_mutex* openssl_rand_mutex = NULL;
+#if OPENSSL_VERSION_NUMBER < 0x10100000L
+static HMAC_CTX *HMAC_CTX_new(void)
+{
+ HMAC_CTX *ctx = OPENSSL_malloc(sizeof(*ctx));
+ if (ctx != NULL) {
+ HMAC_CTX_init(ctx);
+ }
+ return ctx;
+}
+
+// Per 1.1.0 (https://wiki.openssl.org/index.php/1.1_API_Changes)
+// HMAC_CTX_free should call HMAC_CTX_cleanup, then EVP_MD_CTX_Cleanup.
+// HMAC_CTX_cleanup internally calls EVP_MD_CTX_cleanup so these
+// calls are not needed.
+static void HMAC_CTX_free(HMAC_CTX *ctx)
+{
+ if (ctx != NULL) {
+ HMAC_CTX_cleanup(ctx);
+ OPENSSL_free(ctx);
+ }
+}
+#endif
+
static int sqlcipher_openssl_add_random(void *ctx, void *buffer, int length) {
#ifndef SQLCIPHER_OPENSSL_NO_MUTEX_RAND
sqlite3_mutex_enter(openssl_rand_mutex);
is called by SQLCipher internally. This should prevent SQLCipher from
"cleaning up" openssl when it was initialized externally by the program */
EVP_cleanup();
+ } else {
+ openssl_external_init = 0;
}
#ifndef SQLCIPHER_OPENSSL_NO_MUTEX_RAND
sqlite3_mutex_free(openssl_rand_mutex);
static int sqlcipher_openssl_hmac(void *ctx, unsigned char *hmac_key, int key_sz, unsigned char *in, int in_sz, unsigned char *in2, int in2_sz, unsigned char *out) {
unsigned int outlen;
-#if OPENSSL_VERSION_NUMBER >= 0x10100001L
- HMAC_CTX *hctx;
- hctx = HMAC_CTX_new();
+ HMAC_CTX* hctx = HMAC_CTX_new();
+ if(hctx == NULL) return SQLITE_ERROR;
HMAC_Init_ex(hctx, hmac_key, key_sz, EVP_sha1(), NULL);
HMAC_Update(hctx, in, in_sz);
HMAC_Update(hctx, in2, in2_sz);
HMAC_Final(hctx, out, &outlen);
HMAC_CTX_free(hctx);
-#else
- HMAC_CTX hctx;
- HMAC_CTX_init(&hctx);
- HMAC_Init_ex(&hctx, hmac_key, key_sz, EVP_sha1(), NULL);
- HMAC_Update(&hctx, in, in_sz);
- HMAC_Update(&hctx, in2, in2_sz);
- HMAC_Final(&hctx, out, &outlen);
- HMAC_CTX_cleanup(&hctx);
-#endif
return SQLITE_OK;
}
static int sqlcipher_openssl_cipher(void *ctx, int mode, unsigned char *key, int key_sz, unsigned char *iv, unsigned char *in, int in_sz, unsigned char *out) {
int tmp_csz, csz;
-#if OPENSSL_VERSION_NUMBER >= 0x10100001L
- EVP_CIPHER_CTX *ectx;
- ectx = EVP_CIPHER_CTX_new();
+ EVP_CIPHER_CTX* ectx = EVP_CIPHER_CTX_new();
+ if(ectx == NULL) return SQLITE_ERROR;
EVP_CipherInit_ex(ectx, ((openssl_ctx *)ctx)->evp_cipher, NULL, NULL, NULL, mode);
EVP_CIPHER_CTX_set_padding(ectx, 0); // no padding
EVP_CipherInit_ex(ectx, NULL, NULL, key, iv, mode);
EVP_CipherUpdate(ectx, out, &tmp_csz, in, in_sz);
csz = tmp_csz;
out += tmp_csz;
- EVP_CipherFinal(ectx, out, &tmp_csz);
+ EVP_CipherFinal_ex(ectx, out, &tmp_csz);
csz += tmp_csz;
EVP_CIPHER_CTX_free(ectx);
-#else
- EVP_CIPHER_CTX ectx;
- EVP_CipherInit(&ectx, ((openssl_ctx *)ctx)->evp_cipher, NULL, NULL, mode);
- EVP_CIPHER_CTX_set_padding(&ectx, 0); // no padding
- EVP_CipherInit(&ectx, NULL, key, iv, mode);
- EVP_CipherUpdate(&ectx, out, &tmp_csz, in, in_sz);
- csz = tmp_csz;
- out += tmp_csz;
- EVP_CipherFinal(&ectx, out, &tmp_csz);
- csz += tmp_csz;
- EVP_CIPHER_CTX_cleanup(&ectx);
-#endif
assert(in_sz == csz);
-
return SQLITE_OK;
}
CCCryptorFinal(cryptor, out, in_sz - csz, &tmp_csz);
csz += tmp_csz;
CCCryptorRelease(cryptor);
- assert(size == csz);
+ assert(in_sz == csz);
return SQLITE_OK;
}
** isxdigit() 0x08
** toupper() 0x20
** SQLite identifier character 0x40
+** Quote character 0x80
**
** Bit 0x20 is set if the mapped character requires translation to upper
** case. i.e. if the character is a lower-case ASCII character.
**
** (x & ~(map[x]&0x20))
**
-** Standard function tolower() is implemented using the sqlite3UpperToLower[]
+** The equivalent of tolower() is implemented using the sqlite3UpperToLower[]
** array. tolower() is used more often than toupper() by SQLite.
**
-** Bit 0x40 is set if the character non-alphanumeric and can be used in an
+** Bit 0x40 is set if the character is non-alphanumeric and can be used in an
** SQLite identifier. Identifiers are alphanumerics, "_", "$", and any
** non-ASCII UTF character. Hence the test for whether or not a character is
** part of an identifier is 0x46.
-**
-** SQLite's versions are identical to the standard versions assuming a
-** locale of "C". They are implemented as macros in sqliteInt.h.
*/
#ifdef SQLITE_ASCII
SQLITE_PRIVATE const unsigned char sqlite3CtypeMap[256] = {
0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, /* 08..0f ........ */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10..17 ........ */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 18..1f ........ */
- 0x01, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, /* 20..27 !"#$%&' */
+ 0x01, 0x00, 0x80, 0x00, 0x40, 0x00, 0x00, 0x80, /* 20..27 !"#$%&' */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 28..2f ()*+,-./ */
0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, /* 30..37 01234567 */
0x0c, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 38..3f 89:;<=>? */
0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x02, /* 40..47 @ABCDEFG */
0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, /* 48..4f HIJKLMNO */
0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, /* 50..57 PQRSTUVW */
- 0x02, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x40, /* 58..5f XYZ[\]^_ */
- 0x00, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x22, /* 60..67 `abcdefg */
+ 0x02, 0x02, 0x02, 0x80, 0x00, 0x00, 0x00, 0x40, /* 58..5f XYZ[\]^_ */
+ 0x80, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x22, /* 60..67 `abcdefg */
0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, /* 68..6f hijklmno */
0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, /* 70..77 pqrstuvw */
0x22, 0x22, 0x22, 0x00, 0x00, 0x00, 0x00, 0x00, /* 78..7f xyz{|}~. */
# define SQLITE_SORTER_PMASZ 250
#endif
+/* Statement journals spill to disk when their size exceeds the following
+** threshold (in bytes). 0 means that statement journals are created and
+** written to disk immediately (the default behavior for SQLite versions
+** before 3.12.0). -1 means always keep the entire statement journal in
+** memory. (The statement journal is also always held entirely in memory
+** if journal_mode=MEMORY or if temp_store=MEMORY, regardless of this
+** setting.)
+*/
+#ifndef SQLITE_STMTJRNL_SPILL
+# define SQLITE_STMTJRNL_SPILL (64*1024)
+#endif
+
/*
** The following singleton contains the global configuration for
** the SQLite library.
0, /* neverCorrupt */
128, /* szLookaside */
500, /* nLookaside */
+ SQLITE_STMTJRNL_SPILL, /* nStmtSpill */
{0,0,0,0,0,0,0,0}, /* m */
{0,0,0,0,0,0,0,0,0}, /* mutex */
{0,0,0,0,0,0,0,0,0,0,0,0,0},/* pcache2 */
#ifndef SQLITE_OMIT_BUILTIN_TEST
0, /* xTestCallback */
#endif
- 0 /* bLocaltimeFault */
+ 0, /* bLocaltimeFault */
+ 0x7ffffffe /* iOnceResetThreshold */
};
/*
** database connections. After initialization, this table is
** read-only.
*/
-SQLITE_PRIVATE SQLITE_WSD FuncDefHash sqlite3GlobalFunctions;
+SQLITE_PRIVATE FuncDefHash sqlite3BuiltinFunctions;
/*
** Constant tokens for values 0 and 1.
** The value of the "pending" byte must be 0x40000000 (1 byte past the
** 1-gibabyte boundary) in a compatible database. SQLite never uses
** the database page that contains the pending byte. It never attempts
-** to read or write that page. The pending byte page is set assign
+** to read or write that page. The pending byte page is set aside
** for use by the VFS layers as space for managing file locks.
**
** During testing, it is often desirable to move the pending byte to
#if SQLITE_CHECK_PAGES
"CHECK_PAGES",
#endif
+#if defined(__clang__) && defined(__clang_major__)
+ "COMPILER=clang-" CTIMEOPT_VAL(__clang_major__) "."
+ CTIMEOPT_VAL(__clang_minor__) "."
+ CTIMEOPT_VAL(__clang_patchlevel__),
+#elif defined(_MSC_VER)
+ "COMPILER=msvc-" CTIMEOPT_VAL(_MSC_VER),
+#elif defined(__GNUC__) && defined(__VERSION__)
+ "COMPILER=gcc-" __VERSION__,
+#endif
#if SQLITE_COVERAGE_TEST
"COVERAGE_TEST",
#endif
"DISABLE_LFS",
#endif
#if SQLITE_ENABLE_8_3_NAMES
- "ENABLE_8_3_NAMES",
+ "ENABLE_8_3_NAMES=" CTIMEOPT_VAL(SQLITE_ENABLE_8_3_NAMES),
#endif
#if SQLITE_ENABLE_API_ARMOR
"ENABLE_API_ARMOR",
** The name can optionally begin with "SQLITE_" but the "SQLITE_" prefix
** is not required for a match.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_compileoption_used(const char *zOptName){
+SQLITE_API int sqlite3_compileoption_used(const char *zOptName){
int i, n;
#if SQLITE_ENABLE_API_ARMOR
** Return the N-th compile-time option string. If N is out of range,
** return a NULL pointer.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_compileoption_get(int N){
+SQLITE_API const char *sqlite3_compileoption_get(int N){
if( N>=0 && N<ArraySize(azCompileOpt) ){
return azCompileOpt[N];
}
** 6000 lines long) it was split up into several smaller files and
** this header information was factored out.
*/
-#ifndef _VDBEINT_H_
-#define _VDBEINT_H_
+#ifndef SQLITE_VDBEINT_H
+#define SQLITE_VDBEINT_H
/*
** The maximum number of times that a statement will try to reparse
/* Opaque type used by code in vdbesort.c */
typedef struct VdbeSorter VdbeSorter;
-/* Opaque type used by the explainer */
-typedef struct Explain Explain;
-
/* Elements of the linked list at Vdbe.pAuxData */
typedef struct AuxData AuxData;
#endif
Bool isEphemeral:1; /* True for an ephemeral table */
Bool useRandomRowid:1;/* Generate new record numbers semi-randomly */
- Bool isOrdered:1; /* True if the underlying table is BTREE_UNORDERED */
+ Bool isOrdered:1; /* True if the table is not BTREE_UNORDERED */
Pgno pgnoRoot; /* Root page of the open btree cursor */
i16 nField; /* Number of fields in the header */
u16 nHdrParsed; /* Number of header fields parsed so far */
** aType[] and nField+1 array slots for aOffset[] */
};
+
+/*
+** A value for VdbeCursor.cacheStatus that means the cache is always invalid.
+*/
+#define CACHE_STALE 0
+
/*
** When a sub-program is executed (OP_Program), a structure of this type
** is allocated to store the current value of the program counter, as
Op *aOp; /* Program instructions for parent frame */
i64 *anExec; /* Event counters from parent frame */
Mem *aMem; /* Array of memory cells for parent frame */
- u8 *aOnceFlag; /* Array of OP_Once flags for parent frame */
VdbeCursor **apCsr; /* Array of Vdbe cursors for parent frame */
void *token; /* Copy of SubProgram.token */
i64 lastRowid; /* Last insert rowid (sqlite3.lastRowid) */
+ AuxData *pAuxData; /* Linked list of auxdata allocations */
int nCursor; /* Number of entries in apCsr */
int pc; /* Program Counter in parent (calling) frame */
int nOp; /* Size of aOp array */
int nMem; /* Number of entries in aMem */
- int nOnceFlag; /* Number of entries in aOnceFlag */
int nChildMem; /* Number of memory cells for child frame */
int nChildCsr; /* Number of cursors for child frame */
int nChange; /* Statement changes (Vdbe.nChange) */
#define VdbeFrameMem(p) ((Mem *)&((u8 *)p)[ROUND8(sizeof(VdbeFrame))])
/*
-** A value for VdbeCursor.cacheValid that means the cache is always invalid.
-*/
-#define CACHE_STALE 0
-
-/*
** Internally, the vdbe manipulates nearly all SQL values as Mem
** structures. Each Mem struct may cache multiple representations (string,
** integer etc.) of the same value.
sqlite3_value *argv[1]; /* Argument set */
};
-/*
-** An Explain object accumulates indented output which is helpful
-** in describing recursive data structures.
-*/
-struct Explain {
- Vdbe *pVdbe; /* Attach the explanation to this Vdbe */
- StrAccum str; /* The string being accumulated */
- int nIndent; /* Number of elements in aIndent */
- u16 aIndent[100]; /* Levels of indentation */
- char zBase[100]; /* Initial space */
-};
-
/* A bitfield type for use inside of structures. Always follow with :N where
** N is the number of bits.
*/
*/
struct Vdbe {
sqlite3 *db; /* The database connection that owns this statement */
+ Vdbe *pPrev,*pNext; /* Linked list of VDBEs with the same Vdbe.db */
+ Parse *pParse; /* Parsing context used to create this Vdbe */
+ ynVar nVar; /* Number of entries in aVar[] */
+ ynVar nzVar; /* Number of entries in azVar[] */
+ u32 magic; /* Magic number for sanity checking */
+ int nMem; /* Number of memory locations currently allocated */
+ int nCursor; /* Number of slots in apCsr[] */
+ u32 cacheCtr; /* VdbeCursor row cache generation counter */
+ int pc; /* The program counter */
+ int rc; /* Value to return */
+ int nChange; /* Number of db changes made since last reset */
+ int iStatement; /* Statement number (or 0 if has not opened stmt) */
+ i64 iCurrentTime; /* Value of julianday('now') for this statement */
+ i64 nFkConstraint; /* Number of imm. FK constraints this VM */
+ i64 nStmtDefCons; /* Number of def. constraints when stmt started */
+ i64 nStmtDefImmCons; /* Number of def. imm constraints when stmt started */
+
+ /* When allocating a new Vdbe object, all of the fields below should be
+ ** initialized to zero or NULL */
+
Op *aOp; /* Space to hold the virtual machine's program */
Mem *aMem; /* The memory locations */
Mem **apArg; /* Arguments to currently executing user function */
Mem *aColName; /* Column names to return */
Mem *pResultSet; /* Pointer to an array of results */
- Parse *pParse; /* Parsing context used to create this Vdbe */
- int nMem; /* Number of memory locations currently allocated */
- int nOp; /* Number of instructions in the program */
- int nCursor; /* Number of slots in apCsr[] */
- u32 magic; /* Magic number for sanity checking */
char *zErrMsg; /* Error message written here */
- Vdbe *pPrev,*pNext; /* Linked list of VDBEs with the same Vdbe.db */
VdbeCursor **apCsr; /* One element of this array for each open cursor */
Mem *aVar; /* Values for the OP_Variable opcode. */
char **azVar; /* Name of variables */
- ynVar nVar; /* Number of entries in aVar[] */
- ynVar nzVar; /* Number of entries in azVar[] */
- u32 cacheCtr; /* VdbeCursor row cache generation counter */
- int pc; /* The program counter */
- int rc; /* Value to return */
+#ifndef SQLITE_OMIT_TRACE
+ i64 startTime; /* Time when query started - used for profiling */
+#endif
+ int nOp; /* Number of instructions in the program */
#ifdef SQLITE_DEBUG
int rcApp; /* errcode set by sqlite3_result_error_code() */
#endif
u16 nResColumn; /* Number of columns in one row of the result set */
u8 errorAction; /* Recovery action to do in case of an error */
u8 minWriteFileFormat; /* Minimum file format for writable database files */
+ bft expired:1; /* True if the VM needs to be recompiled */
+ bft doingRerun:1; /* True if rerunning after an auto-reprepare */
bft explain:2; /* True if EXPLAIN present on SQL command */
bft changeCntOn:1; /* True to update the change-counter */
- bft expired:1; /* True if the VM needs to be recompiled */
bft runOnlyOnce:1; /* Automatically expire on reset */
bft usesStmtJournal:1; /* True if uses a statement journal */
bft readOnly:1; /* True for statements that do not write */
bft bIsReader:1; /* True for statements that read */
bft isPrepareV2:1; /* True if prepared with prepare_v2() */
- bft doingRerun:1; /* True if rerunning after an auto-reprepare */
- int nChange; /* Number of db changes made since last reset */
yDbMask btreeMask; /* Bitmask of db->aDb[] entries referenced */
yDbMask lockMask; /* Subset of btreeMask that requires a lock */
- int iStatement; /* Statement number (or 0 if has not opened stmt) */
u32 aCounter[5]; /* Counters used by sqlite3_stmt_status() */
-#ifndef SQLITE_OMIT_TRACE
- i64 startTime; /* Time when query started - used for profiling */
-#endif
- i64 iCurrentTime; /* Value of julianday('now') for this statement */
- i64 nFkConstraint; /* Number of imm. FK constraints this VM */
- i64 nStmtDefCons; /* Number of def. constraints when stmt started */
- i64 nStmtDefImmCons; /* Number of def. imm constraints when stmt started */
char *zSql; /* Text of the SQL statement that generated this */
void *pFree; /* Free this when deleting the vdbe */
VdbeFrame *pFrame; /* Parent frame */
int nFrame; /* Number of frames in pFrame list */
u32 expmask; /* Binding to these vars invalidates VM */
SubProgram *pProgram; /* Linked list of all sub-programs used by VM */
- int nOnceFlag; /* Size of array aOnceFlag[] */
- u8 *aOnceFlag; /* Flags for OP_Once */
AuxData *pAuxData; /* Linked list of auxdata allocations */
#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
i64 *anExec; /* Number of times each op has been executed */
/*
** The following are allowed values for Vdbe.magic
*/
-#define VDBE_MAGIC_INIT 0x26bceaa5 /* Building a VDBE program */
-#define VDBE_MAGIC_RUN 0xbdf20da3 /* VDBE is ready to execute */
-#define VDBE_MAGIC_HALT 0x519c2973 /* VDBE has completed execution */
-#define VDBE_MAGIC_DEAD 0xb606c3c8 /* The VDBE has been deallocated */
+#define VDBE_MAGIC_INIT 0x16bceaa5 /* Building a VDBE program */
+#define VDBE_MAGIC_RUN 0x2df20da3 /* VDBE is ready to execute */
+#define VDBE_MAGIC_HALT 0x319c2973 /* VDBE has completed execution */
+#define VDBE_MAGIC_RESET 0x48fa9f76 /* Reset and ready to run again */
+#define VDBE_MAGIC_DEAD 0x5606c3c8 /* The VDBE has been deallocated */
+
+/*
+** Structure used to store the context required by the
+** sqlite3_preupdate_*() API functions.
+*/
+struct PreUpdate {
+ Vdbe *v;
+ VdbeCursor *pCsr; /* Cursor to read old values from */
+ int op; /* One of SQLITE_INSERT, UPDATE, DELETE */
+ u8 *aRecord; /* old.* database record */
+ KeyInfo keyinfo;
+ UnpackedRecord *pUnpacked; /* Unpacked version of aRecord[] */
+ UnpackedRecord *pNewUnpacked; /* Unpacked version of new.* record */
+ int iNewReg; /* Register for new.* values */
+ i64 iKey1; /* First key value passed to hook */
+ i64 iKey2; /* Second key value passed to hook */
+ Mem *aNew; /* Array of new.* values */
+ Table *pTab; /* Schema object being upated */
+};
/*
** Function prototypes
SQLITE_PRIVATE u32 sqlite3VdbeSerialType(Mem*, int, u32*);
SQLITE_PRIVATE u32 sqlite3VdbeSerialPut(unsigned char*, Mem*, u32);
SQLITE_PRIVATE u32 sqlite3VdbeSerialGet(const unsigned char*, u32, Mem*);
-SQLITE_PRIVATE void sqlite3VdbeDeleteAuxData(Vdbe*, int, int);
+SQLITE_PRIVATE void sqlite3VdbeDeleteAuxData(sqlite3*, AuxData**, int, int);
int sqlite2BtreeKeyCompare(BtCursor *, const void *, int, int, int *);
SQLITE_PRIVATE int sqlite3VdbeIdxKeyCompare(sqlite3*,VdbeCursor*,UnpackedRecord*,int*);
SQLITE_PRIVATE int sqlite3VdbeCloseStatement(Vdbe *, int);
SQLITE_PRIVATE void sqlite3VdbeFrameDelete(VdbeFrame*);
SQLITE_PRIVATE int sqlite3VdbeFrameRestore(VdbeFrame *);
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+SQLITE_PRIVATE void sqlite3VdbePreUpdateHook(Vdbe*,VdbeCursor*,int,const char*,Table*,i64,int);
+#endif
SQLITE_PRIVATE int sqlite3VdbeTransferError(Vdbe *p);
SQLITE_PRIVATE int sqlite3VdbeSorterInit(sqlite3 *, int, VdbeCursor *);
#define ExpandBlob(P) SQLITE_OK
#endif
-#endif /* !defined(_VDBEINT_H_) */
+#endif /* !defined(SQLITE_VDBEINT_H) */
/************** End of vdbeInt.h *********************************************/
/************** Continuing where we left off in status.c *********************/
/*
** Query status information.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_status64(
+SQLITE_API int sqlite3_status64(
int op,
sqlite3_int64 *pCurrent,
sqlite3_int64 *pHighwater,
(void)pMutex; /* Prevent warning when SQLITE_THREADSAFE=0 */
return SQLITE_OK;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag){
- sqlite3_int64 iCur, iHwtr;
+SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag){
+ sqlite3_int64 iCur = 0, iHwtr = 0;
int rc;
#ifdef SQLITE_ENABLE_API_ARMOR
if( pCurrent==0 || pHighwater==0 ) return SQLITE_MISUSE_BKPT;
/*
** Query status information for a single database connection
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_status(
+SQLITE_API int sqlite3_db_status(
sqlite3 *db, /* The database connection whose status is desired */
int op, /* Status verb */
int *pCurrent, /* Write current value here */
** by all pagers associated with the given database connection. The
** highwater mark is meaningless and is returned as zero.
*/
+ case SQLITE_DBSTATUS_CACHE_USED_SHARED:
case SQLITE_DBSTATUS_CACHE_USED: {
int totalUsed = 0;
int i;
Btree *pBt = db->aDb[i].pBt;
if( pBt ){
Pager *pPager = sqlite3BtreePager(pBt);
- totalUsed += sqlite3PagerMemUsed(pPager);
+ int nByte = sqlite3PagerMemUsed(pPager);
+ if( op==SQLITE_DBSTATUS_CACHE_USED_SHARED ){
+ nByte = nByte / sqlite3BtreeConnectionCount(pBt);
+ }
+ totalUsed += nByte;
}
}
sqlite3BtreeLeaveAll(db);
#ifndef SQLITE_OMIT_DATETIME_FUNCS
+/*
+** The MSVC CRT on Windows CE may not have a localtime() function.
+** So declare a substitute. The substitute function itself is
+** defined in "os_win.c".
+*/
+#if !defined(SQLITE_OMIT_LOCALTIME) && defined(_WIN32_WCE) && \
+ (!defined(SQLITE_MSVC_LOCALTIME_API) || !SQLITE_MSVC_LOCALTIME_API)
+struct tm *__cdecl localtime(const time_t *);
+#endif
/*
** A structure for holding a single date and time.
p->validTZ = 0;
}
+#ifndef SQLITE_OMIT_LOCALTIME
/*
** On recent Windows platforms, the localtime_s() function is available
** as part of the "Secure CRT". It is essentially equivalent to
#define HAVE_LOCALTIME_S 1
#endif
-#ifndef SQLITE_OMIT_LOCALTIME
/*
** The following routine implements the rough equivalent of localtime_r()
** using whatever operating-system specific localtime facility that
){
time_t t;
char *zFormat = (char *)sqlite3_user_data(context);
- sqlite3 *db;
sqlite3_int64 iT;
struct tm *pTm;
struct tm sNow;
** external linkage.
*/
SQLITE_PRIVATE void sqlite3RegisterDateTimeFunctions(void){
- static SQLITE_WSD FuncDef aDateTimeFuncs[] = {
+ static FuncDef aDateTimeFuncs[] = {
#ifndef SQLITE_OMIT_DATETIME_FUNCS
DFUNCTION(julianday, -1, 0, 0, juliandayFunc ),
DFUNCTION(date, -1, 0, 0, dateFunc ),
STR_FUNCTION(current_timestamp, 0, "%Y-%m-%d %H:%M:%S", 0, currentTimeFunc),
#endif
};
- int i;
- FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions);
- FuncDef *aFunc = (FuncDef*)&GLOBAL(FuncDef, aDateTimeFuncs);
-
- for(i=0; i<ArraySize(aDateTimeFuncs); i++){
- sqlite3FuncDefInsert(pHash, &aFunc[i]);
- }
+ sqlite3InsertBuiltinFuncs(aDateTimeFuncs, ArraySize(aDateTimeFuncs));
}
/************** End of date.c ************************************************/
** This file contains OS interface code that is common to all
** architectures.
*/
-#define _SQLITE_OS_C_ 1
/* #include "sqliteInt.h" */
-#undef _SQLITE_OS_C_
/*
** If we compile with the SQLITE_TEST macro set, then the following block
#if defined(SQLITE_TEST)
SQLITE_API int sqlite3_memdebug_vfs_oom_test = 1;
#define DO_OS_MALLOC_TEST(x) \
- if (sqlite3_memdebug_vfs_oom_test && (!x || !sqlite3IsMemJournal(x))) { \
+ if (sqlite3_memdebug_vfs_oom_test && (!x || !sqlite3JournalIsInMemory(x))) { \
void *pTstAlloc = sqlite3Malloc(10); \
- if (!pTstAlloc) return SQLITE_IOERR_NOMEM; \
+ if (!pTstAlloc) return SQLITE_IOERR_NOMEM_BKPT; \
sqlite3_free(pTstAlloc); \
}
#else
** of this would be completely automatic if SQLite were coded using
** C++ instead of plain old C.
*/
-SQLITE_PRIVATE int sqlite3OsClose(sqlite3_file *pId){
- int rc = SQLITE_OK;
+SQLITE_PRIVATE void sqlite3OsClose(sqlite3_file *pId){
if( pId->pMethods ){
- rc = pId->pMethods->xClose(pId);
+ pId->pMethods->xClose(pId);
pId->pMethods = 0;
}
- return rc;
}
SQLITE_PRIVATE int sqlite3OsRead(sqlite3_file *id, void *pBuf, int amt, i64 offset){
DO_OS_MALLOC_TEST(id);
SQLITE_PRIVATE int sqlite3OsSleep(sqlite3_vfs *pVfs, int nMicro){
return pVfs->xSleep(pVfs, nMicro);
}
+SQLITE_PRIVATE int sqlite3OsGetLastError(sqlite3_vfs *pVfs){
+ return pVfs->xGetLastError ? pVfs->xGetLastError(pVfs, 0, 0) : 0;
+}
SQLITE_PRIVATE int sqlite3OsCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *pTimeOut){
int rc;
/* IMPLEMENTATION-OF: R-49045-42493 SQLite will use the xCurrentTimeInt64()
int flags,
int *pOutFlags
){
- int rc = SQLITE_NOMEM;
+ int rc;
sqlite3_file *pFile;
pFile = (sqlite3_file *)sqlite3MallocZero(pVfs->szOsFile);
if( pFile ){
}else{
*ppFile = pFile;
}
+ }else{
+ rc = SQLITE_NOMEM_BKPT;
}
return rc;
}
-SQLITE_PRIVATE int sqlite3OsCloseFree(sqlite3_file *pFile){
- int rc = SQLITE_OK;
+SQLITE_PRIVATE void sqlite3OsCloseFree(sqlite3_file *pFile){
assert( pFile );
- rc = sqlite3OsClose(pFile);
+ sqlite3OsClose(pFile);
sqlite3_free(pFile);
- return rc;
}
/*
*/
SQLITE_PRIVATE int sqlite3OsInit(void){
void *p = sqlite3_malloc(10);
- if( p==0 ) return SQLITE_NOMEM;
+ if( p==0 ) return SQLITE_NOMEM_BKPT;
sqlite3_free(p);
return sqlite3_os_init();
}
** Locate a VFS by name. If no name is given, simply return the
** first VFS on the list.
*/
-SQLITE_API sqlite3_vfs *SQLITE_STDCALL sqlite3_vfs_find(const char *zVfs){
+SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfs){
sqlite3_vfs *pVfs = 0;
#if SQLITE_THREADSAFE
sqlite3_mutex *mutex;
** VFS multiple times. The new VFS becomes the default if makeDflt is
** true.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_register(sqlite3_vfs *pVfs, int makeDflt){
+SQLITE_API int sqlite3_vfs_register(sqlite3_vfs *pVfs, int makeDflt){
MUTEX_LOGIC(sqlite3_mutex *mutex;)
#ifndef SQLITE_OMIT_AUTOINIT
int rc = sqlite3_initialize();
/*
** Unregister a VFS so that it is no longer accessible.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs *pVfs){
+SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs *pVfs){
#if SQLITE_THREADSAFE
sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER);
#endif
/*
** Retrieve a pointer to a static mutex or allocate a new dynamic one.
*/
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_mutex_alloc(int id){
+SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int id){
#ifndef SQLITE_OMIT_AUTOINIT
if( id<=SQLITE_MUTEX_RECURSIVE && sqlite3_initialize() ) return 0;
if( id>SQLITE_MUTEX_RECURSIVE && sqlite3MutexInit() ) return 0;
/*
** Free a dynamic mutex.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_free(sqlite3_mutex *p){
+SQLITE_API void sqlite3_mutex_free(sqlite3_mutex *p){
if( p ){
assert( sqlite3GlobalConfig.mutex.xMutexFree );
sqlite3GlobalConfig.mutex.xMutexFree(p);
** Obtain the mutex p. If some other thread already has the mutex, block
** until it can be obtained.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_enter(sqlite3_mutex *p){
+SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex *p){
if( p ){
assert( sqlite3GlobalConfig.mutex.xMutexEnter );
sqlite3GlobalConfig.mutex.xMutexEnter(p);
** Obtain the mutex p. If successful, return SQLITE_OK. Otherwise, if another
** thread holds the mutex and it cannot be obtained, return SQLITE_BUSY.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_try(sqlite3_mutex *p){
+SQLITE_API int sqlite3_mutex_try(sqlite3_mutex *p){
int rc = SQLITE_OK;
if( p ){
assert( sqlite3GlobalConfig.mutex.xMutexTry );
** is not currently entered. If a NULL pointer is passed as an argument
** this function is a no-op.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_leave(sqlite3_mutex *p){
+SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex *p){
if( p ){
assert( sqlite3GlobalConfig.mutex.xMutexLeave );
sqlite3GlobalConfig.mutex.xMutexLeave(p);
** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routine are
** intended for use inside assert() statements.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_held(sqlite3_mutex *p){
+SQLITE_API int sqlite3_mutex_held(sqlite3_mutex *p){
assert( p==0 || sqlite3GlobalConfig.mutex.xMutexHeld );
return p==0 || sqlite3GlobalConfig.mutex.xMutexHeld(p);
}
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex *p){
+SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex *p){
assert( p==0 || sqlite3GlobalConfig.mutex.xMutexNotheld );
return p==0 || sqlite3GlobalConfig.mutex.xMutexNotheld(p);
}
** This file contains inline asm code for retrieving "high-performance"
** counters for x86 class CPUs.
*/
-#ifndef _HWTIME_H_
-#define _HWTIME_H_
+#ifndef SQLITE_HWTIME_H
+#define SQLITE_HWTIME_H
/*
** The following routine only works on pentium-class (or newer) processors.
#endif
-#endif /* !defined(_HWTIME_H_) */
+#endif /* !defined(SQLITE_HWTIME_H) */
/************** End of hwtime.h **********************************************/
/************** Continuing where we left off in os_common.h ******************/
**
** This file contains code that is specific to Windows.
*/
-#ifndef _OS_WIN_H_
-#define _OS_WIN_H_
+#ifndef SQLITE_OS_WIN_H
+#define SQLITE_OS_WIN_H
/*
** Include the primary Windows SDK header file.
# define SQLITE_OS_WIN_THREADS 0
#endif
-#endif /* _OS_WIN_H_ */
+#endif /* SQLITE_OS_WIN_H */
/************** End of os_win.h **********************************************/
/************** Continuing where we left off in mutex_w32.c ******************/
*/
static LONG SQLITE_WIN32_VOLATILE winMutex_lock = 0;
-SQLITE_API int SQLITE_STDCALL sqlite3_win32_is_nt(void); /* os_win.c */
-SQLITE_API void SQLITE_STDCALL sqlite3_win32_sleep(DWORD milliseconds); /* os_win.c */
+SQLITE_API int sqlite3_win32_is_nt(void); /* os_win.c */
+SQLITE_API void sqlite3_win32_sleep(DWORD milliseconds); /* os_win.c */
static int winMutexInit(void){
/* The first to increment to 1 does actual initialization */
** held by SQLite. An example of non-essential memory is memory used to
** cache database pages that are not currently in use.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_release_memory(int n){
+SQLITE_API int sqlite3_release_memory(int n){
#ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT
return sqlite3PcacheReleaseMemory(n);
#else
** that was invoked when memory usage grew too large. Now it is a
** no-op.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_memory_alarm(
+SQLITE_API int sqlite3_memory_alarm(
void(*xCallback)(void *pArg, sqlite3_int64 used,int N),
void *pArg,
sqlite3_int64 iThreshold
** Set the soft heap-size limit for the library. Passing a zero or
** negative value indicates no limit.
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_soft_heap_limit64(sqlite3_int64 n){
+SQLITE_API sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 n){
sqlite3_int64 priorLimit;
sqlite3_int64 excess;
sqlite3_int64 nUsed;
if( excess>0 ) sqlite3_release_memory((int)(excess & 0x7fffffff));
return priorLimit;
}
-SQLITE_API void SQLITE_STDCALL sqlite3_soft_heap_limit(int n){
+SQLITE_API void sqlite3_soft_heap_limit(int n){
if( n<0 ) n = 0;
sqlite3_soft_heap_limit64(n);
}
/*
** Return the amount of memory currently checked out.
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_used(void){
+SQLITE_API sqlite3_int64 sqlite3_memory_used(void){
sqlite3_int64 res, mx;
sqlite3_status64(SQLITE_STATUS_MEMORY_USED, &res, &mx, 0);
return res;
** checked out since either the beginning of this process
** or since the most recent reset.
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_highwater(int resetFlag){
+SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag){
sqlite3_int64 res, mx;
sqlite3_status64(SQLITE_STATUS_MEMORY_USED, &res, &mx, resetFlag);
return mx;
** First make sure the memory subsystem is initialized, then do the
** allocation.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc(int n){
+SQLITE_API void *sqlite3_malloc(int n){
#ifndef SQLITE_OMIT_AUTOINIT
if( sqlite3_initialize() ) return 0;
#endif
return n<=0 ? 0 : sqlite3Malloc(n);
}
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc64(sqlite3_uint64 n){
+SQLITE_API void *sqlite3_malloc64(sqlite3_uint64 n){
#ifndef SQLITE_OMIT_AUTOINIT
if( sqlite3_initialize() ) return 0;
#endif
return db->lookaside.sz;
}
}
-SQLITE_API sqlite3_uint64 SQLITE_STDCALL sqlite3_msize(void *p){
+SQLITE_API sqlite3_uint64 sqlite3_msize(void *p){
assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) );
assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
return p ? sqlite3GlobalConfig.m.xSize(p) : 0;
/*
** Free memory previously obtained from sqlite3Malloc().
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_free(void *p){
+SQLITE_API void sqlite3_free(void *p){
if( p==0 ) return; /* IMP: R-49053-54554 */
assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) );
** The public interface to sqlite3Realloc. Make sure that the memory
** subsystem is initialized prior to invoking sqliteRealloc.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc(void *pOld, int n){
+SQLITE_API void *sqlite3_realloc(void *pOld, int n){
#ifndef SQLITE_OMIT_AUTOINIT
if( sqlite3_initialize() ) return 0;
#endif
if( n<0 ) n = 0; /* IMP: R-26507-47431 */
return sqlite3Realloc(pOld, n);
}
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc64(void *pOld, sqlite3_uint64 n){
+SQLITE_API void *sqlite3_realloc64(void *pOld, sqlite3_uint64 n){
#ifndef SQLITE_OMIT_AUTOINIT
if( sqlite3_initialize() ) return 0;
#endif
static SQLITE_NOINLINE int apiOomError(sqlite3 *db){
sqlite3OomClear(db);
sqlite3Error(db, SQLITE_NOMEM);
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
/*
** Conversion types fall into various categories as defined by the
** following enumeration.
*/
-#define etRADIX 1 /* Integer types. %d, %x, %o, and so forth */
-#define etFLOAT 2 /* Floating point. %f */
-#define etEXP 3 /* Exponentional notation. %e and %E */
-#define etGENERIC 4 /* Floating or exponential, depending on exponent. %g */
-#define etSIZE 5 /* Return number of characters processed so far. %n */
-#define etSTRING 6 /* Strings. %s */
-#define etDYNSTRING 7 /* Dynamically allocated strings. %z */
-#define etPERCENT 8 /* Percent symbol. %% */
-#define etCHARX 9 /* Characters. %c */
+#define etRADIX 0 /* Integer types. %d, %x, %o, and so forth */
+#define etFLOAT 1 /* Floating point. %f */
+#define etEXP 2 /* Exponentional notation. %e and %E */
+#define etGENERIC 3 /* Floating or exponential, depending on exponent. %g */
+#define etSIZE 4 /* Return number of characters processed so far. %n */
+#define etSTRING 5 /* Strings. %s */
+#define etDYNSTRING 6 /* Dynamically allocated strings. %z */
+#define etPERCENT 7 /* Percent symbol. %% */
+#define etCHARX 8 /* Characters. %c */
/* The rest are extensions, not normally found in printf() */
-#define etSQLESCAPE 10 /* Strings with '\'' doubled. %q */
-#define etSQLESCAPE2 11 /* Strings with '\'' doubled and enclosed in '',
+#define etSQLESCAPE 9 /* Strings with '\'' doubled. %q */
+#define etSQLESCAPE2 10 /* Strings with '\'' doubled and enclosed in '',
NULL pointers replaced by SQL NULL. %Q */
-#define etTOKEN 12 /* a pointer to a Token structure */
-#define etSRCLIST 13 /* a pointer to a SrcList */
-#define etPOINTER 14 /* The %p conversion */
-#define etSQLESCAPE3 15 /* %w -> Strings with '\"' doubled */
-#define etORDINAL 16 /* %r -> 1st, 2nd, 3rd, 4th, etc. English only */
+#define etTOKEN 11 /* a pointer to a Token structure */
+#define etSRCLIST 12 /* a pointer to a SrcList */
+#define etPOINTER 13 /* The %p conversion */
+#define etSQLESCAPE3 14 /* %w -> Strings with '\"' doubled */
+#define etORDINAL 15 /* %r -> 1st, 2nd, 3rd, 4th, etc. English only */
-#define etINVALID 0 /* Any unrecognized conversion type */
+#define etINVALID 16 /* Any unrecognized conversion type */
/*
etByte flag_long; /* True if "l" flag is present */
etByte flag_longlong; /* True if the "ll" flag is present */
etByte done; /* Loop termination flag */
- etByte xtype = 0; /* Conversion paradigm */
+ etByte xtype = etINVALID; /* Conversion paradigm */
u8 bArgList; /* True for SQLITE_PRINTF_SQLFUNC */
u8 useIntern; /* Ok to use internal conversions (ex: %T) */
char prefix; /* Prefix character. "+" or "-" or " " or '\0'. */
** Print into memory obtained from sqlite3_malloc(). Omit the internal
** %-conversion extensions.
*/
-SQLITE_API char *SQLITE_STDCALL sqlite3_vmprintf(const char *zFormat, va_list ap){
+SQLITE_API char *sqlite3_vmprintf(const char *zFormat, va_list ap){
char *z;
char zBase[SQLITE_PRINT_BUF_SIZE];
StrAccum acc;
** Print into memory obtained from sqlite3_malloc()(). Omit the internal
** %-conversion extensions.
*/
-SQLITE_API char *SQLITE_CDECL sqlite3_mprintf(const char *zFormat, ...){
+SQLITE_API char *sqlite3_mprintf(const char *zFormat, ...){
va_list ap;
char *z;
#ifndef SQLITE_OMIT_AUTOINIT
**
** sqlite3_vsnprintf() is the varargs version.
*/
-SQLITE_API char *SQLITE_STDCALL sqlite3_vsnprintf(int n, char *zBuf, const char *zFormat, va_list ap){
+SQLITE_API char *sqlite3_vsnprintf(int n, char *zBuf, const char *zFormat, va_list ap){
StrAccum acc;
if( n<=0 ) return zBuf;
#ifdef SQLITE_ENABLE_API_ARMOR
sqlite3VXPrintf(&acc, zFormat, ap);
return sqlite3StrAccumFinish(&acc);
}
-SQLITE_API char *SQLITE_CDECL sqlite3_snprintf(int n, char *zBuf, const char *zFormat, ...){
+SQLITE_API char *sqlite3_snprintf(int n, char *zBuf, const char *zFormat, ...){
char *z;
va_list ap;
va_start(ap,zFormat);
/*
** Format and write a message to the log if logging is enabled.
*/
-SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...){
+SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...){
va_list ap; /* Vararg list */
if( sqlite3GlobalConfig.xLog ){
va_start(ap, zFormat);
/*
-** Generate a human-readable description of a the Select object.
+** Generate a human-readable description of a Select object.
*/
SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 moreToFollow){
int n = 0;
sqlite3TreeViewPush(pView, 1);
}
do{
- sqlite3TreeViewLine(pView, "SELECT%s%s (0x%p) selFlags=0x%x",
+ sqlite3TreeViewLine(pView, "SELECT%s%s (0x%p) selFlags=0x%x nSelectRow=%d",
((p->selFlags & SF_Distinct) ? " DISTINCT" : ""),
- ((p->selFlags & SF_Aggregate) ? " agg_flag" : ""), p, p->selFlags
+ ((p->selFlags & SF_Aggregate) ? " agg_flag" : ""), p, p->selFlags,
+ (int)p->nSelectRow
);
if( cnt++ ) sqlite3TreeViewPop(pView);
if( p->pPrior ){
case TK_ISNULL: zUniOp = "ISNULL"; break;
case TK_NOTNULL: zUniOp = "NOTNULL"; break;
+ case TK_SPAN: {
+ sqlite3TreeViewLine(pView, "SPAN %Q", pExpr->u.zToken);
+ sqlite3TreeViewExpr(pView, pExpr->pLeft, 0);
+ break;
+ }
+
case TK_COLLATE: {
sqlite3TreeViewLine(pView, "COLLATE %Q", pExpr->u.zToken);
sqlite3TreeViewExpr(pView, pExpr->pLeft, 0);
break;
}
#endif
+ case TK_MATCH: {
+ sqlite3TreeViewLine(pView, "MATCH {%d:%d}%s",
+ pExpr->iTable, pExpr->iColumn, zFlgs);
+ sqlite3TreeViewExpr(pView, pExpr->pRight, 0);
+ break;
+ }
+ case TK_VECTOR: {
+ sqlite3TreeViewBareExprList(pView, pExpr->x.pList, "VECTOR");
+ break;
+ }
+ case TK_SELECT_COLUMN: {
+ sqlite3TreeViewLine(pView, "SELECT-COLUMN %d", pExpr->iColumn);
+ sqlite3TreeViewSelect(pView, pExpr->pLeft->x.pSelect, 0);
+ break;
+ }
default: {
sqlite3TreeViewLine(pView, "op=%d", pExpr->op);
break;
sqlite3TreeViewPop(pView);
}
+
/*
** Generate a human-readable explanation of an expression list.
*/
-SQLITE_PRIVATE void sqlite3TreeViewExprList(
+SQLITE_PRIVATE void sqlite3TreeViewBareExprList(
TreeView *pView,
const ExprList *pList,
- u8 moreToFollow,
const char *zLabel
){
- int i;
- pView = sqlite3TreeViewPush(pView, moreToFollow);
if( zLabel==0 || zLabel[0]==0 ) zLabel = "LIST";
if( pList==0 ){
sqlite3TreeViewLine(pView, "%s (empty)", zLabel);
}else{
+ int i;
sqlite3TreeViewLine(pView, "%s", zLabel);
for(i=0; i<pList->nExpr; i++){
int j = pList->a[i].u.x.iOrderByCol;
if( j ) sqlite3TreeViewPop(pView);
}
}
+}
+SQLITE_PRIVATE void sqlite3TreeViewExprList(
+ TreeView *pView,
+ const ExprList *pList,
+ u8 moreToFollow,
+ const char *zLabel
+){
+ pView = sqlite3TreeViewPush(pView, moreToFollow);
+ sqlite3TreeViewBareExprList(pView, pList, zLabel);
sqlite3TreeViewPop(pView);
}
/*
** Return N random bytes.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *pBuf){
+SQLITE_API void sqlite3_randomness(int N, void *pBuf){
unsigned char t;
unsigned char *zBuf = pBuf;
*ppThread = 0;
p = sqlite3Malloc(sizeof(*p));
- if( p==0 ) return SQLITE_NOMEM;
+ if( p==0 ) return SQLITE_NOMEM_BKPT;
memset(p, 0, sizeof(*p));
p->xTask = xTask;
p->pIn = pIn;
int rc;
assert( ppOut!=0 );
- if( NEVER(p==0) ) return SQLITE_NOMEM;
+ if( NEVER(p==0) ) return SQLITE_NOMEM_BKPT;
if( p->done ){
*ppOut = p->pOut;
rc = SQLITE_OK;
assert( xTask!=0 );
*ppThread = 0;
p = sqlite3Malloc(sizeof(*p));
- if( p==0 ) return SQLITE_NOMEM;
+ if( p==0 ) return SQLITE_NOMEM_BKPT;
/* If the SQLITE_TESTCTRL_FAULT_INSTALL callback is registered to a
** function that returns SQLITE_ERROR when passed the argument 200, that
** forces worker threads to run sequentially and deterministically
BOOL bRc;
assert( ppOut!=0 );
- if( NEVER(p==0) ) return SQLITE_NOMEM;
+ if( NEVER(p==0) ) return SQLITE_NOMEM_BKPT;
if( p->xTask==0 ){
/* assert( p->id==GetCurrentThreadId() ); */
rc = WAIT_OBJECT_0;
assert( xTask!=0 );
*ppThread = 0;
p = sqlite3Malloc(sizeof(*p));
- if( p==0 ) return SQLITE_NOMEM;
+ if( p==0 ) return SQLITE_NOMEM_BKPT;
if( (SQLITE_PTR_TO_INT(p)/17)&1 ){
p->xTask = xTask;
p->pIn = pIn;
SQLITE_PRIVATE int sqlite3ThreadJoin(SQLiteThread *p, void **ppOut){
assert( ppOut!=0 );
- if( NEVER(p==0) ) return SQLITE_NOMEM;
+ if( NEVER(p==0) ) return SQLITE_NOMEM_BKPT;
if( p->xTask ){
*ppOut = p->xTask(p->pIn);
}else{
&nb
projects / pysqlcipher.git / commitdiff