From a8c13d73fbc7af65b5b6c5059e9d4246f5984472 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Louis-Philippe=20V=C3=A9ronneau?= Date: Wed, 11 Oct 2017 17:24:20 -0400 Subject: markdownify the README --- README.md | 224 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 224 insertions(+) create mode 100644 README.md (limited to 'README.md') diff --git a/README.md b/README.md new file mode 100644 index 0000000..8b1288d --- /dev/null +++ b/README.md @@ -0,0 +1,224 @@ +# tor + +#### Table of Contents + +* [Overview](#overview) + * [Upgrade Notice](#upgrade-notice) +* [Dependencies](#dependencies) +* [Usage](#usage) + * [Installing tor](#installing-tor) + * [Configuring SOCKS](#configuring-socks) + * [Installing torsocks](#installing-torsock) + * [Configuring relays](#configuring-relays) + * [Configuring the control](#configuring-control) + * [Configuring hidden services](#configuring-hidden-services) + * [Configuring directories](#configuring-directories) + * [Configuring exit policies](#configuring-exit-policies) +* [Polipo](#polipo) +* [Munin](#munin) + +# Overview + +This module tries to manage tor, making sure it is installed, running, has +munin graphs if desired and allows for configuration of relays, hidden services, +exit policies, etc. + +## Upgrade Notice + + * Previously, if you did not set the `$outbound_bindaddress` variable, it was + being automatically set to the `$listen_address variable`. Now this is not + being done and instead you will need to set the `$outbound_bindaddress` + explicitly for it to be set. + + * The `tor::relay{}` variables `$bandwidth_rate` and `$bandwidth_burst` were + previously used for the tor configuration variables `RelayBandwidthRate` and + `RelayBandwidthBurst`, these have been renamed to `$relay_bandwidth_rate` + and `$relay_bandwidth_burst`. If you were using these, please rename your + variables in your configuration. + + * The variables `$bandwidth_rate` and `$bandwidth_burst` are now used for the + tor configuration variables `BandwidthRate` and `BandwidthBurst`. If you + used `$bandwidth_rate` or `$bandwidth_burst` please be aware that these + values have changed and adjust your configuration as necessary. + + * The `$tor_ensure_version` was converted to a parameter for the tor and + `tor::daemon` classes. + + * The `$torsocks_ensure_version` was converted to a parameter for the + `tor::torsocks` class. + + * The options that used to be settable with the `tor::daemon::global_opts` + define now are parameters for the `tor::daemon class`, and + `tor::daemon::global_opts` was removed accordingly. + + +# Dependencies + +This module needs: + + * the [concat module](https://github.com/puppetlabs/puppetlabs-concat.git) + +# Usage + +## Installing tor + +To install tor, simply include the 'tor' class in your manifests: + + class { 'tor': } + +You can specify the `$ensure_version` class parameter to get a specific +version installed. + +However, if you want to make configuration changes to your tor daemon, you will +want to instead include the `tor::daemon` class in your manifests, which will +inherit the `tor` class from above: + + class { '::tor::daemon': } + +You have the following class parameters that you can specify: + + data_dir (default: '/var/lib/tor') + config_file (default: '/etc/tor/torrc') + use_bridges (default: 0) + automap_hosts_on_resolve (default: 0) + log_rules (default: ['notice file /var/log/tor/notices.log']) + +The `data_dir` will be used for the tor user's `$HOME`, and the tor +`DataDirectory` value. + +The `config_file` will be managed and the daemon restarted when it changed. + +`use_bridges` and `automap_hosts_on_resolve` are used to set the `UseBridges` +and `AutomapHostsOnResolve` torrc settings. + +The `log_rules` can be an array of different Log lines, each will be added to +the config, for example the following will use syslog: + + class { '::tor::daemon': + log_rules => [ 'notice syslog' ], + } + +If you want to set specific options for the tor class, you may pass them +directly to the tor::daemon in your manifests, e.g.: + + class { '::tor::daemon': + use_munin => true, + automap_hosts_on_resolve => 1, + } + +## Configuring SOCKS + +To configure tor socks support, you can do the following: + + tor::daemon::socks { "listen_locally": + listen_addresses => [ '127.0.0.1' ]; + } + +This will setup the `SocksListenAddress` to be `127.0.0.1`. You also can pass +the following options to `tor::daemon::socks`: + + $port = 0 - SocksPort + $listen_address - can pass multiple values to configure SocksListenAddress lines + $policies - can pass multiple values to configure SocksPolicy lines + +## Installing torsocks + +To install torsocks, simply include the `torsocks` class in your manifests: + + class { 'tor::torsocks': } + +You can specify the `$ensure_version` class parameter to get a specific +version installed. + +# Configuring relays + +An example relay configuration: + + tor::daemon::relay { "foobar": + port => '9001', + listen_addresses => '192.168.0.1', + address => '192.168.0.1', + bandwidth_rate => '256', + bandwidth_burst => '256', + contact_info => "Foo ", + my_family => ''; + } + +You have the following options that can be passed to a relay, with the defaults +shown: + + $port = 0, + $listen_addresses = [], + $portforwarding = 0, # PortForwarding 0|1, set for opening ports at the router via UPnP. + # Requires 'tor-fw-helper' binary present. + $bandwidth_rate = '', # KB/s, defaulting to using tor's default: 5120KB/s + $bandwidth_burst = '', # KB/s, defaulting to using tor's default: 10240KB/s + $relay_bandwidth_rate = 0, # KB/s, 0 for no limit. + $relay_bandwidth_burst = 0, # KB/s, 0 for no limit. + $accounting_max = 0, # GB, 0 for no limit. + $accounting_start = [], + $contact_info = '', + $my_family = '', # TODO: autofill with other relays + $address = "tor.${domain}", + $bridge_relay = 0, + $ensure = present + $nickname = $name + +## Configuring the control + +To pass parameters to configure the ControlPort and the HashedControlPassword, +you would do something like this: + + tor::daemon::control { "foo-control": + port => '80', + hashed_control_password => '', + ensure => present; + } + +Note: you must pass a hashed password to the control port, if you are going to +use it. + +## Configuring hidden services + +To configure a tor hidden service you can do something like the following: + + tor::daemon::hidden_service { "hidden_ssh": + ports => 22; + } + +The `HiddenServiceDir` is set to the `${data_dir}/${name}`. + +## Configuring directories + +An example directory configuration: + + tor::daemon::directory { 'ssh_directory': + port => '80', + listen_addresses => '192.168.0.1', + port_front_page => '/etc/tor/tor.html'; + } + +## Configuring exit policies + +To configure exit policies, you can do the following: + + tor::daemon::exit_policy { "ssh_exit_policy": + accept => "192.168.0.1:22", + reject => "*:*"; + } + + +# Polipo + +Polipo support can be enabled by doing: + + include tor::polipo + +This will inherit the `tor` class by default, remove `privoxy` if it's +installed, and install `polipo`, making sure it is running. + +# Munin + +If you are using `munin`, and have the puppet munin module installed, you can +set the `use_munin` parameter to `true` when defining the `tor::daemon` class +to have graphs setup for you. -- cgit v1.2.3