From 303aaaf3e9335c0cc0f38b66c9ad4d9a62114538 Mon Sep 17 00:00:00 2001 From: andreas Date: Sat, 12 Apr 2008 08:09:54 +0000 Subject: further changes ... still unfinished --- templates/nagioscfg.erb | 962 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 962 insertions(+) create mode 100644 templates/nagioscfg.erb (limited to 'templates') diff --git a/templates/nagioscfg.erb b/templates/nagioscfg.erb new file mode 100644 index 0000000..2618a1c --- /dev/null +++ b/templates/nagioscfg.erb @@ -0,0 +1,962 @@ +############################################################################## +# +# NAGIOS.CFG - Sample Main Config File for Nagios 2.9 +# +# Read the documentation for more information on this configuration +# file. I've provided some comments here, but things may not be so +# clear without further explanation. +# +# Last Modified: 12-21-2006 +# +############################################################################## + + +# LOG FILE +# This is the main log file where service and host events are logged +# for historical purposes. This should be the first option specified +# in the config file!!! + +log_file=/var/log/nagios/nagios.log + + + +# OBJECT CONFIGURATION FILE(S) +# This is the configuration file in which you define hosts, host +# groups, contacts, contact groups, services, etc. I guess it would +# be better called an object definition file, but for historical +# reasons it isn't. You can split object definitions into several +# different config files by using multiple cfg_file statements here. +# Nagios will read and process all the config files you define. +# This can be very useful if you want to keep command definitions +# separate from host and contact definitions... + +# Command definitions +cfg_file=/etc/nagios/commands.cfg + +# Host and service definitions for monitoring this machine +#cfg_file=/etc/nagios/localhost.cfg + + +# You can split other types of object definitions across several +# config files if you wish (as done here), or keep them all in a +# single config file. + +#cfg_file=/etc/nagios/contactgroups.cfg +#cfg_file=/etc/nagios/contacts.cfg +#cfg_file=/etc/nagios/hostgroups.cfg +#cfg_file=/etc/nagios/hosts.cfg +#cfg_file=/etc/nagios/services.cfg +#cfg_file=/etc/nagios/timeperiods.cfg +#cfg_file=/etc/nagios/misccommands.cfg +#cfg_file=/etc/nagios/checkcommands.cfg + + +# Extended host/service info definitions are now stored along with +# other object definitions: +#cfg_file=/etc/nagios/hostextinfo.cfg +#cfg_file=/etc/nagios/serviceextinfo.cfg + +# You can also tell Nagios to process all config files (with a .cfg +# extension) in a particular directory by using the cfg_dir +# directive as shown below: + +cfg_dir=<%= nagios_cfgdir %>/hosts.d + +# OBJECT CACHE FILE +# This option determines where object definitions are cached when +# Nagios starts/restarts. The CGIs read object definitions from +# this cache file (rather than looking at the object config files +# directly) in order to prevent inconsistencies that can occur +# when the config files are modified after Nagios starts. + +object_cache_file=/var/log/nagios/objects.cache + + +# RESOURCE FILE +# This is an optional resource file that contains $USERx$ macro +# definitions. Multiple resource files can be specified by using +# multiple resource_file definitions. The CGIs will not attempt to +# read the contents of resource files, so information that is +# considered to be sensitive (usernames, passwords, etc) can be +# defined as macros in this file and restrictive permissions (600) +# can be placed on this file. + +resource_file=/etc/nagios/private/resource.cfg + + + +# STATUS FILE +# This is where the current status of all monitored services and +# hosts is stored. Its contents are read and processed by the CGIs. +# The contents of the status file are deleted every time Nagios +# restarts. + +status_file=/var/log/nagios/status.dat + + + +# NAGIOS USER +# This determines the effective user that Nagios should run as. +# You can either supply a username or a UID. + +nagios_user=nagios + + + +# NAGIOS GROUP +# This determines the effective group that Nagios should run as. +# You can either supply a group name or a GID. + +nagios_group=nagios + + + +# EXTERNAL COMMAND OPTION +# This option allows you to specify whether or not Nagios should check +# for external commands (in the command file defined below). By default +# Nagios will *not* check for external commands, just to be on the +# cautious side. If you want to be able to use the CGI command interface +# you will have to enable this. Setting this value to 0 disables command +# checking (the default), other values enable it. + +check_external_commands=1 + + + +# EXTERNAL COMMAND CHECK INTERVAL +# This is the interval at which Nagios should check for external commands. +# This value works of the interval_length you specify later. If you leave +# that at its default value of 60 (seconds), a value of 1 here will cause +# Nagios to check for external commands every minute. If you specify a +# number followed by an "s" (i.e. 15s), this will be interpreted to mean +# actual seconds rather than a multiple of the interval_length variable. +# Note: In addition to reading the external command file at regularly +# scheduled intervals, Nagios will also check for external commands after +# event handlers are executed. +# NOTE: Setting this value to -1 causes Nagios to check the external +# command file as often as possible. + +#command_check_interval=15s +command_check_interval=1 + + + +# EXTERNAL COMMAND FILE +# This is the file that Nagios checks for external command requests. +# It is also where the command CGI will write commands that are submitted +# by users, so it must be writeable by the user that the web server +# is running as (usually 'nobody'). Permissions should be set at the +# directory level instead of on the file, as the file is deleted every +# time its contents are processed. + +command_file=/var/spool/nagios/cmd/nagios.cmd + + + +# EXTERNAL COMMAND BUFFER SLOTS +# This settings is used to tweak the number of items or "slots" that +# the Nagios daemon should allocate to the buffer that holds incoming +# external commands before they are processed. As external commands +# are processed by the daemon, they are removed from the buffer. + +external_command_buffer_slots=4096 + + + +# COMMENT FILE +# This is the file that Nagios will use for storing host and service +# comments. + +comment_file=/var/log/nagios/comments.dat + + + +# DOWNTIME FILE +# This is the file that Nagios will use for storing host and service +# downtime data. + +downtime_file=/var/log/nagios/downtime.dat + + + +# LOCK FILE +# This is the lockfile that Nagios will use to store its PID number +# in when it is running in daemon mode. + +lock_file=/var/run/nagios.pid + + + +# TEMP FILE +# This is a temporary file that is used as scratch space when Nagios +# updates the status log, cleans the comment file, etc. This file +# is created, used, and deleted throughout the time that Nagios is +# running. + +temp_file=/var/log/nagios/nagios.tmp + + + +# EVENT BROKER OPTIONS +# Controls what (if any) data gets sent to the event broker. +# Values: 0 = Broker nothing +# -1 = Broker everything +# = See documentation + +event_broker_options=-1 + + + +# EVENT BROKER MODULE(S) +# This directive is used to specify an event broker module that should +# by loaded by Nagios at startup. Use multiple directives if you want +# to load more than one module. Arguments that should be passed to +# the module at startup are seperated from the module path by a space. +# +# Example: +# +# broker_module= [moduleargs] + +#broker_module=/somewhere/module1.o +#broker_module=/somewhere/module2.o arg1 arg2=3 debug=0 + + + + +# LOG ROTATION METHOD +# This is the log rotation method that Nagios should use to rotate +# the main log file. Values are as follows.. +# n = None - don't rotate the log +# h = Hourly rotation (top of the hour) +# d = Daily rotation (midnight every day) +# w = Weekly rotation (midnight on Saturday evening) +# m = Monthly rotation (midnight last day of month) + +log_rotation_method=d + + + +# LOG ARCHIVE PATH +# This is the directory where archived (rotated) log files should be +# placed (assuming you've chosen to do log rotation). + +log_archive_path=/var/log/nagios/archives + + + +# LOGGING OPTIONS +# If you want messages logged to the syslog facility, as well as the +# NetAlarm log file set this option to 1. If not, set it to 0. + +use_syslog=1 + + + +# NOTIFICATION LOGGING OPTION +# If you don't want notifications to be logged, set this value to 0. +# If notifications should be logged, set the value to 1. + +log_notifications=1 + + + +# SERVICE RETRY LOGGING OPTION +# If you don't want service check retries to be logged, set this value +# to 0. If retries should be logged, set the value to 1. + +log_service_retries=1 + + + +# HOST RETRY LOGGING OPTION +# If you don't want host check retries to be logged, set this value to +# 0. If retries should be logged, set the value to 1. + +log_host_retries=1 + + + +# EVENT HANDLER LOGGING OPTION +# If you don't want host and service event handlers to be logged, set +# this value to 0. If event handlers should be logged, set the value +# to 1. + +log_event_handlers=1 + + + +# INITIAL STATES LOGGING OPTION +# If you want Nagios to log all initial host and service states to +# the main log file (the first time the service or host is checked) +# you can enable this option by setting this value to 1. If you +# are not using an external application that does long term state +# statistics reporting, you do not need to enable this option. In +# this case, set the value to 0. + +log_initial_states=0 + + + +# EXTERNAL COMMANDS LOGGING OPTION +# If you don't want Nagios to log external commands, set this value +# to 0. If external commands should be logged, set this value to 1. +# Note: This option does not include logging of passive service +# checks - see the option below for controlling whether or not +# passive checks are logged. + +log_external_commands=1 + + + +# PASSIVE CHECKS LOGGING OPTION +# If you don't want Nagios to log passive host and service checks, set +# this value to 0. If passive checks should be logged, set +# this value to 1. + +log_passive_checks=1 + + + +# GLOBAL HOST AND SERVICE EVENT HANDLERS +# These options allow you to specify a host and service event handler +# command that is to be run for every host or service state change. +# The global event handler is executed immediately prior to the event +# handler that you have optionally specified in each host or +# service definition. The command argument is the short name of a +# command definition that you define in your host configuration file. +# Read the HTML docs for more information. + +#global_host_event_handler=somecommand +#global_service_event_handler=somecommand + + + +# SERVICE INTER-CHECK DELAY METHOD +# This is the method that Nagios should use when initially +# "spreading out" service checks when it starts monitoring. The +# default is to use smart delay calculation, which will try to +# space all service checks out evenly to minimize CPU load. +# Using the dumb setting will cause all checks to be scheduled +# at the same time (with no delay between them)! This is not a +# good thing for production, but is useful when testing the +# parallelization functionality. +# n = None - don't use any delay between checks +# d = Use a "dumb" delay of 1 second between checks +# s = Use "smart" inter-check delay calculation +# x.xx = Use an inter-check delay of x.xx seconds + +service_inter_check_delay_method=s + + + +# MAXIMUM SERVICE CHECK SPREAD +# This variable determines the timeframe (in minutes) from the +# program start time that an initial check of all services should +# be completed. Default is 30 minutes. + +max_service_check_spread=30 + + + +# SERVICE CHECK INTERLEAVE FACTOR +# This variable determines how service checks are interleaved. +# Interleaving the service checks allows for a more even +# distribution of service checks and reduced load on remote +# hosts. Setting this value to 1 is equivalent to how versions +# of Nagios previous to 0.0.5 did service checks. Set this +# value to s (smart) for automatic calculation of the interleave +# factor unless you have a specific reason to change it. +# s = Use "smart" interleave factor calculation +# x = Use an interleave factor of x, where x is a +# number greater than or equal to 1. + +service_interleave_factor=s + + + +# HOST INTER-CHECK DELAY METHOD +# This is the method that Nagios should use when initially +# "spreading out" host checks when it starts monitoring. The +# default is to use smart delay calculation, which will try to +# space all host checks out evenly to minimize CPU load. +# Using the dumb setting will cause all checks to be scheduled +# at the same time (with no delay between them)! +# n = None - don't use any delay between checks +# d = Use a "dumb" delay of 1 second between checks +# s = Use "smart" inter-check delay calculation +# x.xx = Use an inter-check delay of x.xx seconds + +host_inter_check_delay_method=s + + + +# MAXIMUM HOST CHECK SPREAD +# This variable determines the timeframe (in minutes) from the +# program start time that an initial check of all hosts should +# be completed. Default is 30 minutes. + +max_host_check_spread=30 + + + +# MAXIMUM CONCURRENT SERVICE CHECKS +# This option allows you to specify the maximum number of +# service checks that can be run in parallel at any given time. +# Specifying a value of 1 for this variable essentially prevents +# any service checks from being parallelized. A value of 0 +# will not restrict the number of concurrent checks that are +# being executed. + +max_concurrent_checks=0 + + + +# SERVICE CHECK REAPER FREQUENCY +# This is the frequency (in seconds!) that Nagios will process +# the results of services that have been checked. + +service_reaper_frequency=10 + + + +# CHECK RESULT BUFFER SLOTS +# This settings is used to tweak the number of items or "slots" that +# the Nagios daemon should allocate to the buffer that holds +# service check results before they are processed. As check results +# are processed by the daemon, they are removed from the buffer. + +check_result_buffer_slots=4096 + + + +# AUTO-RESCHEDULING OPTION +# This option determines whether or not Nagios will attempt to +# automatically reschedule active host and service checks to +# "smooth" them out over time. This can help balance the load on +# the monitoring server. +# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE +# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY + +auto_reschedule_checks=0 + + + +# AUTO-RESCHEDULING INTERVAL +# This option determines how often (in seconds) Nagios will +# attempt to automatically reschedule checks. This option only +# has an effect if the auto_reschedule_checks option is enabled. +# Default is 30 seconds. +# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE +# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY + +auto_rescheduling_interval=30 + + + + +# AUTO-RESCHEDULING WINDOW +# This option determines the "window" of time (in seconds) that +# Nagios will look at when automatically rescheduling checks. +# Only host and service checks that occur in the next X seconds +# (determined by this variable) will be rescheduled. This option +# only has an effect if the auto_reschedule_checks option is +# enabled. Default is 180 seconds (3 minutes). +# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE +# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY + +auto_rescheduling_window=180 + + + +# SLEEP TIME +# This is the number of seconds to sleep between checking for system +# events and service checks that need to be run. + +sleep_time=0.25 + + + +# TIMEOUT VALUES +# These options control how much time Nagios will allow various +# types of commands to execute before killing them off. Options +# are available for controlling maximum time allotted for +# service checks, host checks, event handlers, notifications, the +# ocsp command, and performance data commands. All values are in +# seconds. + +service_check_timeout=60 +host_check_timeout=30 +event_handler_timeout=30 +notification_timeout=30 +ocsp_timeout=5 +perfdata_timeout=5 + + + +# RETAIN STATE INFORMATION +# This setting determines whether or not Nagios will save state +# information for services and hosts before it shuts down. Upon +# startup Nagios will reload all saved service and host state +# information before starting to monitor. This is useful for +# maintaining long-term data on state statistics, etc, but will +# slow Nagios down a bit when it (re)starts. Since its only +# a one-time penalty, I think its well worth the additional +# startup delay. + +retain_state_information=1 + + + +# STATE RETENTION FILE +# This is the file that Nagios should use to store host and +# service state information before it shuts down. The state +# information in this file is also read immediately prior to +# starting to monitor the network when Nagios is restarted. +# This file is used only if the preserve_state_information +# variable is set to 1. + +state_retention_file=/var/log/nagios/retention.dat + + + +# RETENTION DATA UPDATE INTERVAL +# This setting determines how often (in minutes) that Nagios +# will automatically save retention data during normal operation. +# If you set this value to 0, Nagios will not save retention +# data at regular interval, but it will still save retention +# data before shutting down or restarting. If you have disabled +# state retention, this option has no effect. + +retention_update_interval=60 + + + +# USE RETAINED PROGRAM STATE +# This setting determines whether or not Nagios will set +# program status variables based on the values saved in the +# retention file. If you want to use retained program status +# information, set this value to 1. If not, set this value +# to 0. + +use_retained_program_state=1 + + + +# USE RETAINED SCHEDULING INFO +# This setting determines whether or not Nagios will retain +# the scheduling info (next check time) for hosts and services +# based on the values saved in the retention file. If you +# If you want to use retained scheduling info, set this +# value to 1. If not, set this value to 0. + +use_retained_scheduling_info=0 + + + +# INTERVAL LENGTH +# This is the seconds per unit interval as used in the +# host/contact/service configuration files. Setting this to 60 means +# that each interval is one minute long (60 seconds). Other settings +# have not been tested much, so your mileage is likely to vary... + +interval_length=60 + + + +# AGGRESSIVE HOST CHECKING OPTION +# If you don't want to turn on aggressive host checking features, set +# this value to 0 (the default). Otherwise set this value to 1 to +# enable the aggressive check option. Read the docs for more info +# on what aggressive host check is or check out the source code in +# base/checks.c + +use_aggressive_host_checking=0 + + + +# SERVICE CHECK EXECUTION OPTION +# This determines whether or not Nagios will actively execute +# service checks when it initially starts. If this option is +# disabled, checks are not actively made, but Nagios can still +# receive and process passive check results that come in. Unless +# you're implementing redundant hosts or have a special need for +# disabling the execution of service checks, leave this enabled! +# Values: 1 = enable checks, 0 = disable checks + +execute_service_checks=1 + + + +# PASSIVE SERVICE CHECK ACCEPTANCE OPTION +# This determines whether or not Nagios will accept passive +# service checks results when it initially (re)starts. +# Values: 1 = accept passive checks, 0 = reject passive checks + +accept_passive_service_checks=1 + + + +# HOST CHECK EXECUTION OPTION +# This determines whether or not Nagios will actively execute +# host checks when it initially starts. If this option is +# disabled, checks are not actively made, but Nagios can still +# receive and process passive check results that come in. Unless +# you're implementing redundant hosts or have a special need for +# disabling the execution of host checks, leave this enabled! +# Values: 1 = enable checks, 0 = disable checks + +execute_host_checks=1 + + + +# PASSIVE HOST CHECK ACCEPTANCE OPTION +# This determines whether or not Nagios will accept passive +# host checks results when it initially (re)starts. +# Values: 1 = accept passive checks, 0 = reject passive checks + +accept_passive_host_checks=1 + + + +# NOTIFICATIONS OPTION +# This determines whether or not Nagios will sent out any host or +# service notifications when it is initially (re)started. +# Values: 1 = enable notifications, 0 = disable notifications + +enable_notifications=1 + + + +# EVENT HANDLER USE OPTION +# This determines whether or not Nagios will run any host or +# service event handlers when it is initially (re)started. Unless +# you're implementing redundant hosts, leave this option enabled. +# Values: 1 = enable event handlers, 0 = disable event handlers + +enable_event_handlers=1 + + + +# PROCESS PERFORMANCE DATA OPTION +# This determines whether or not Nagios will process performance +# data returned from service and host checks. If this option is +# enabled, host performance data will be processed using the +# host_perfdata_command (defined below) and service performance +# data will be processed using the service_perfdata_command (also +# defined below). Read the HTML docs for more information on +# performance data. +# Values: 1 = process performance data, 0 = do not process performance data + +process_performance_data=0 + + + +# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS +# These commands are run after every host and service check is +# performed. These commands are executed only if the +# enable_performance_data option (above) is set to 1. The command +# argument is the short name of a command definition that you +# define in your host configuration file. Read the HTML docs for +# more information on performance data. + +#host_perfdata_command=process-host-perfdata +#service_perfdata_command=process-service-perfdata + + + +# HOST AND SERVICE PERFORMANCE DATA FILES +# These files are used to store host and service performance data. +# Performance data is only written to these files if the +# enable_performance_data option (above) is set to 1. + +#host_perfdata_file=/tmp/host-perfdata +#service_perfdata_file=/tmp/service-perfdata + + + +# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES +# These options determine what data is written (and how) to the +# performance data files. The templates may contain macros, special +# characters (\t for tab, \r for carriage return, \n for newline) +# and plain text. A newline is automatically added after each write +# to the performance data file. Some examples of what you can do are +# shown below. + +#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$ +#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$ + + + + +# HOST AND SERVICE PERFORMANCE DATA FILE MODES +# This option determines whether or not the host and service +# performance data files are opened in write ("w") or append ("a") +# mode. Unless you are the files are named pipes, you will probably +# want to use the default mode of append ("a"). + +#host_perfdata_file_mode=a +#service_perfdata_file_mode=a + + + +# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL +# These options determine how often (in seconds) the host and service +# performance data files are processed using the commands defined +# below. A value of 0 indicates the files should not be periodically +# processed. + +#host_perfdata_file_processing_interval=0 +#service_perfdata_file_processing_interval=0 + + + +# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS +# These commands are used to periodically process the host and +# service performance data files. The interval at which the +# processing occurs is determined by the options above. + +#host_perfdata_file_processing_command=process-host-perfdata-file +#service_perfdata_file_processing_command=process-service-perfdata-file + + + +# OBSESS OVER SERVICE CHECKS OPTION +# This determines whether or not Nagios will obsess over service +# checks and run the ocsp_command defined below. Unless you're +# planning on implementing distributed monitoring, do not enable +# this option. Read the HTML docs for more information on +# implementing distributed monitoring. +# Values: 1 = obsess over services, 0 = do not obsess (default) + +obsess_over_services=0 + + + +# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND +# This is the command that is run for every service check that is +# processed by Nagios. This command is executed only if the +# obsess_over_service option (above) is set to 1. The command +# argument is the short name of a command definition that you +# define in your host configuration file. Read the HTML docs for +# more information on implementing distributed monitoring. + +#ocsp_command=somecommand + + + +# ORPHANED SERVICE CHECK OPTION +# This determines whether or not Nagios will periodically +# check for orphaned services. Since service checks are not +# rescheduled until the results of their previous execution +# instance are processed, there exists a possibility that some +# checks may never get rescheduled. This seems to be a rare +# problem and should not happen under normal circumstances. +# If you have problems with service checks never getting +# rescheduled, you might want to try enabling this option. +# Values: 1 = enable checks, 0 = disable checks + +check_for_orphaned_services=1 + + + +# SERVICE FRESHNESS CHECK OPTION +# This option determines whether or not Nagios will periodically +# check the "freshness" of service results. Enabling this option +# is useful for ensuring passive checks are received in a timely +# manner. +# Values: 1 = enabled freshness checking, 0 = disable freshness checking + +check_service_freshness=1 + + + +# SERVICE FRESHNESS CHECK INTERVAL +# This setting determines how often (in seconds) Nagios will +# check the "freshness" of service check results. If you have +# disabled service freshness checking, this option has no effect. + +service_freshness_check_interval=60 + + + +# HOST FRESHNESS CHECK OPTION +# This option determines whether or not Nagios will periodically +# check the "freshness" of host results. Enabling this option +# is useful for ensuring passive checks are received in a timely +# manner. +# Values: 1 = enabled freshness checking, 0 = disable freshness checking + +check_host_freshness=0 + + + +# HOST FRESHNESS CHECK INTERVAL +# This setting determines how often (in seconds) Nagios will +# check the "freshness" of host check results. If you have +# disabled host freshness checking, this option has no effect. + +host_freshness_check_interval=60 + + + +# AGGREGATED STATUS UPDATES +# This option determines whether or not Nagios will +# aggregate updates of host, service, and program status +# data. Normally, status data is updated immediately when +# a change occurs. This can result in high CPU loads if +# you are monitoring a lot of services. If you want Nagios +# to only refresh status data every few seconds, disable +# this option. +# Values: 1 = enable aggregate updates, 0 = disable aggregate updates + +aggregate_status_updates=1 + + + +# AGGREGATED STATUS UPDATE INTERVAL +# Combined with the aggregate_status_updates option, +# this option determines the frequency (in seconds!) that +# Nagios will periodically dump program, host, and +# service status data. If you are not using aggregated +# status data updates, this option has no effect. + +status_update_interval=15 + + + +# FLAP DETECTION OPTION +# This option determines whether or not Nagios will try +# and detect hosts and services that are "flapping". +# Flapping occurs when a host or service changes between +# states too frequently. When Nagios detects that a +# host or service is flapping, it will temporarily suppress +# notifications for that host/service until it stops +# flapping. Flap detection is very experimental, so read +# the HTML documentation before enabling this feature! +# Values: 1 = enable flap detection +# 0 = disable flap detection (default) + +enable_flap_detection=0 + + + +# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES +# Read the HTML documentation on flap detection for +# an explanation of what this option does. This option +# has no effect if flap detection is disabled. + +low_service_flap_threshold=5.0 +high_service_flap_threshold=20.0 +low_host_flap_threshold=5.0 +high_host_flap_threshold=20.0 + + + +# DATE FORMAT OPTION +# This option determines how short dates are displayed. Valid options +# include: +# us (MM-DD-YYYY HH:MM:SS) +# euro (DD-MM-YYYY HH:MM:SS) +# iso8601 (YYYY-MM-DD HH:MM:SS) +# strict-iso8601 (YYYY-MM-DDTHH:MM:SS) +# + +date_format=us + + + +# P1.PL FILE LOCATION +# This value determines where the p1.pl perl script (used by the +# embedded Perl interpreter) is located. If you didn't compile +# Nagios with embedded Perl support, this option has no effect. + +p1_file=/usr/sbin/p1.pl + + + +# ILLEGAL OBJECT NAME CHARACTERS +# This option allows you to specify illegal characters that cannot +# be used in host names, service descriptions, or names of other +# object types. + +illegal_object_name_chars=`~!$%^&*|'"<>?,()= + + + +# ILLEGAL MACRO OUTPUT CHARACTERS +# This option allows you to specify illegal characters that are +# stripped from macros before being used in notifications, event +# handlers, etc. This DOES NOT affect macros used in service or +# host check commands. +# The following macros are stripped of the characters you specify: +# $HOSTOUTPUT$ +# $HOSTPERFDATA$ +# $HOSTACKAUTHOR$ +# $HOSTACKCOMMENT$ +# $SERVICEOUTPUT$ +# $SERVICEPERFDATA$ +# $SERVICEACKAUTHOR$ +# $SERVICEACKCOMMENT$ + +illegal_macro_output_chars=`~$&|'"<> + + + +# REGULAR EXPRESSION MATCHING +# This option controls whether or not regular expression matching +# takes place in the object config files. Regular expression +# matching is used to match host, hostgroup, service, and service +# group names/descriptions in some fields of various object types. +# Values: 1 = enable regexp matching, 0 = disable regexp matching + +use_regexp_matching=0 + + + +# "TRUE" REGULAR EXPRESSION MATCHING +# This option controls whether or not "true" regular expression +# matching takes place in the object config files. This option +# only has an effect if regular expression matching is enabled +# (see above). If this option is DISABLED, regular expression +# matching only occurs if a string contains wildcard characters +# (* and ?). If the option is ENABLED, regexp matching occurs +# all the time (which can be annoying). +# Values: 1 = enable true matching, 0 = disable true matching + +use_true_regexp_matching=0 + + + + +# ADMINISTRATOR EMAIL ADDRESS +# The email address of the administrator of *this* machine (the one +# doing the monitoring). Nagios never uses this value itself, but +# you can access this value by using the $ADMINEMAIL$ macro in your +# notification commands. + +admin_email=nagios + + + +# ADMINISTRATOR PAGER NUMBER/ADDRESS +# The pager number/address for the administrator of *this* machine. +# Nagios never uses this value itself, but you can access this +# value by using the $ADMINPAGER$ macro in your notification +# commands. + +admin_pager=pagenagios + + + +# DAEMON CORE DUMP OPTION +# This option determines whether or not Nagios is allowed to create +# a core dump when it runs as a daemon. Note that it is generally +# considered bad form to allow this, but it may be useful for +# debugging purposes. +# Values: 1 - Allow core dumps +# 0 - Do not allow core dumps (default) + +daemon_dumps_core=0 + + + -- cgit v1.2.3