diff options
Diffstat (limited to 'templates')
| -rw-r--r-- | templates/command.erb | 5 | ||||
| -rw-r--r-- | templates/host.erb | 10 | ||||
| -rw-r--r-- | templates/nagioscfg.erb | 962 | ||||
| -rw-r--r-- | templates/service.erb | 7 |
4 files changed, 0 insertions, 984 deletions
diff --git a/templates/command.erb b/templates/command.erb deleted file mode 100644 index aeaa8c9..0000000 --- a/templates/command.erb +++ /dev/null @@ -1,5 +0,0 @@ -define command{ - command_name <%= name %> - command_line <%= command_line %> - } - diff --git a/templates/host.erb b/templates/host.erb deleted file mode 100644 index 3598576..0000000 --- a/templates/host.erb +++ /dev/null @@ -1,10 +0,0 @@ -define host{ - use generic-host ; Name of host template to use - hostgroups ping-servers - host_name <%= name %> - alias <%= short_alias %> - address <%= ip %> - <% if ! (/^(none|)$/i =~ nagios_parent) then %> parents <%= nagios_parent %> <% end %> -} - - diff --git a/templates/nagioscfg.erb b/templates/nagioscfg.erb deleted file mode 100644 index 2618a1c..0000000 --- a/templates/nagioscfg.erb +++ /dev/null @@ -1,962 +0,0 @@ -############################################################################## -# -# NAGIOS.CFG - Sample Main Config File for Nagios 2.9 -# -# Read the documentation for more information on this configuration -# file. I've provided some comments here, but things may not be so -# clear without further explanation. -# -# Last Modified: 12-21-2006 -# -############################################################################## - - -# LOG FILE -# This is the main log file where service and host events are logged -# for historical purposes. This should be the first option specified -# in the config file!!! - -log_file=/var/log/nagios/nagios.log - - - -# OBJECT CONFIGURATION FILE(S) -# This is the configuration file in which you define hosts, host -# groups, contacts, contact groups, services, etc. I guess it would -# be better called an object definition file, but for historical -# reasons it isn't. You can split object definitions into several -# different config files by using multiple cfg_file statements here. -# Nagios will read and process all the config files you define. -# This can be very useful if you want to keep command definitions -# separate from host and contact definitions... - -# Command definitions -cfg_file=/etc/nagios/commands.cfg - -# Host and service definitions for monitoring this machine -#cfg_file=/etc/nagios/localhost.cfg - - -# You can split other types of object definitions across several -# config files if you wish (as done here), or keep them all in a -# single config file. - -#cfg_file=/etc/nagios/contactgroups.cfg -#cfg_file=/etc/nagios/contacts.cfg -#cfg_file=/etc/nagios/hostgroups.cfg -#cfg_file=/etc/nagios/hosts.cfg -#cfg_file=/etc/nagios/services.cfg -#cfg_file=/etc/nagios/timeperiods.cfg -#cfg_file=/etc/nagios/misccommands.cfg -#cfg_file=/etc/nagios/checkcommands.cfg - - -# Extended host/service info definitions are now stored along with -# other object definitions: -#cfg_file=/etc/nagios/hostextinfo.cfg -#cfg_file=/etc/nagios/serviceextinfo.cfg - -# You can also tell Nagios to process all config files (with a .cfg -# extension) in a particular directory by using the cfg_dir -# directive as shown below: - -cfg_dir=<%= nagios_cfgdir %>/hosts.d - -# OBJECT CACHE FILE -# This option determines where object definitions are cached when -# Nagios starts/restarts. The CGIs read object definitions from -# this cache file (rather than looking at the object config files -# directly) in order to prevent inconsistencies that can occur -# when the config files are modified after Nagios starts. - -object_cache_file=/var/log/nagios/objects.cache - - -# RESOURCE FILE -# This is an optional resource file that contains $USERx$ macro -# definitions. Multiple resource files can be specified by using -# multiple resource_file definitions. The CGIs will not attempt to -# read the contents of resource files, so information that is -# considered to be sensitive (usernames, passwords, etc) can be -# defined as macros in this file and restrictive permissions (600) -# can be placed on this file. - -resource_file=/etc/nagios/private/resource.cfg - - - -# STATUS FILE -# This is where the current status of all monitored services and -# hosts is stored. Its contents are read and processed by the CGIs. -# The contents of the status file are deleted every time Nagios -# restarts. - -status_file=/var/log/nagios/status.dat - - - -# NAGIOS USER -# This determines the effective user that Nagios should run as. -# You can either supply a username or a UID. - -nagios_user=nagios - - - -# NAGIOS GROUP -# This determines the effective group that Nagios should run as. -# You can either supply a group name or a GID. - -nagios_group=nagios - - - -# EXTERNAL COMMAND OPTION -# This option allows you to specify whether or not Nagios should check -# for external commands (in the command file defined below). By default -# Nagios will *not* check for external commands, just to be on the -# cautious side. If you want to be able to use the CGI command interface -# you will have to enable this. Setting this value to 0 disables command -# checking (the default), other values enable it. - -check_external_commands=1 - - - -# EXTERNAL COMMAND CHECK INTERVAL -# This is the interval at which Nagios should check for external commands. -# This value works of the interval_length you specify later. If you leave -# that at its default value of 60 (seconds), a value of 1 here will cause -# Nagios to check for external commands every minute. If you specify a -# number followed by an "s" (i.e. 15s), this will be interpreted to mean -# actual seconds rather than a multiple of the interval_length variable. -# Note: In addition to reading the external command file at regularly -# scheduled intervals, Nagios will also check for external commands after -# event handlers are executed. -# NOTE: Setting this value to -1 causes Nagios to check the external -# command file as often as possible. - -#command_check_interval=15s -command_check_interval=1 - - - -# EXTERNAL COMMAND FILE -# This is the file that Nagios checks for external command requests. -# It is also where the command CGI will write commands that are submitted -# by users, so it must be writeable by the user that the web server -# is running as (usually 'nobody'). Permissions should be set at the -# directory level instead of on the file, as the file is deleted every -# time its contents are processed. - -command_file=/var/spool/nagios/cmd/nagios.cmd - - - -# EXTERNAL COMMAND BUFFER SLOTS -# This settings is used to tweak the number of items or "slots" that -# the Nagios daemon should allocate to the buffer that holds incoming -# external commands before they are processed. As external commands -# are processed by the daemon, they are removed from the buffer. - -external_command_buffer_slots=4096 - - - -# COMMENT FILE -# This is the file that Nagios will use for storing host and service -# comments. - -comment_file=/var/log/nagios/comments.dat - - - -# DOWNTIME FILE -# This is the file that Nagios will use for storing host and service -# downtime data. - -downtime_file=/var/log/nagios/downtime.dat - - - -# LOCK FILE -# This is the lockfile that Nagios will use to store its PID number -# in when it is running in daemon mode. - -lock_file=/var/run/nagios.pid - - - -# TEMP FILE -# This is a temporary file that is used as scratch space when Nagios -# updates the status log, cleans the comment file, etc. This file -# is created, used, and deleted throughout the time that Nagios is -# running. - -temp_file=/var/log/nagios/nagios.tmp - - - -# EVENT BROKER OPTIONS -# Controls what (if any) data gets sent to the event broker. -# Values: 0 = Broker nothing -# -1 = Broker everything -# <other> = See documentation - -event_broker_options=-1 - - - -# EVENT BROKER MODULE(S) -# This directive is used to specify an event broker module that should -# by loaded by Nagios at startup. Use multiple directives if you want -# to load more than one module. Arguments that should be passed to -# the module at startup are seperated from the module path by a space. -# -# Example: -# -# broker_module=<modulepath> [moduleargs] - -#broker_module=/somewhere/module1.o -#broker_module=/somewhere/module2.o arg1 arg2=3 debug=0 - - - - -# LOG ROTATION METHOD -# This is the log rotation method that Nagios should use to rotate -# the main log file. Values are as follows.. -# n = None - don't rotate the log -# h = Hourly rotation (top of the hour) -# d = Daily rotation (midnight every day) -# w = Weekly rotation (midnight on Saturday evening) -# m = Monthly rotation (midnight last day of month) - -log_rotation_method=d - - - -# LOG ARCHIVE PATH -# This is the directory where archived (rotated) log files should be -# placed (assuming you've chosen to do log rotation). - -log_archive_path=/var/log/nagios/archives - - - -# LOGGING OPTIONS -# If you want messages logged to the syslog facility, as well as the -# NetAlarm log file set this option to 1. If not, set it to 0. - -use_syslog=1 - - - -# NOTIFICATION LOGGING OPTION -# If you don't want notifications to be logged, set this value to 0. -# If notifications should be logged, set the value to 1. - -log_notifications=1 - - - -# SERVICE RETRY LOGGING OPTION -# If you don't want service check retries to be logged, set this value -# to 0. If retries should be logged, set the value to 1. - -log_service_retries=1 - - - -# HOST RETRY LOGGING OPTION -# If you don't want host check retries to be logged, set this value to -# 0. If retries should be logged, set the value to 1. - -log_host_retries=1 - - - -# EVENT HANDLER LOGGING OPTION -# If you don't want host and service event handlers to be logged, set -# this value to 0. If event handlers should be logged, set the value -# to 1. - -log_event_handlers=1 - - - -# INITIAL STATES LOGGING OPTION -# If you want Nagios to log all initial host and service states to -# the main log file (the first time the service or host is checked) -# you can enable this option by setting this value to 1. If you -# are not using an external application that does long term state -# statistics reporting, you do not need to enable this option. In -# this case, set the value to 0. - -log_initial_states=0 - - - -# EXTERNAL COMMANDS LOGGING OPTION -# If you don't want Nagios to log external commands, set this value -# to 0. If external commands should be logged, set this value to 1. -# Note: This option does not include logging of passive service -# checks - see the option below for controlling whether or not -# passive checks are logged. - -log_external_commands=1 - - - -# PASSIVE CHECKS LOGGING OPTION -# If you don't want Nagios to log passive host and service checks, set -# this value to 0. If passive checks should be logged, set -# this value to 1. - -log_passive_checks=1 - - - -# GLOBAL HOST AND SERVICE EVENT HANDLERS -# These options allow you to specify a host and service event handler -# command that is to be run for every host or service state change. -# The global event handler is executed immediately prior to the event -# handler that you have optionally specified in each host or -# service definition. The command argument is the short name of a -# command definition that you define in your host configuration file. -# Read the HTML docs for more information. - -#global_host_event_handler=somecommand -#global_service_event_handler=somecommand - - - -# SERVICE INTER-CHECK DELAY METHOD -# This is the method that Nagios should use when initially -# "spreading out" service checks when it starts monitoring. The -# default is to use smart delay calculation, which will try to -# space all service checks out evenly to minimize CPU load. -# Using the dumb setting will cause all checks to be scheduled -# at the same time (with no delay between them)! This is not a -# good thing for production, but is useful when testing the -# parallelization functionality. -# n = None - don't use any delay between checks -# d = Use a "dumb" delay of 1 second between checks -# s = Use "smart" inter-check delay calculation -# x.xx = Use an inter-check delay of x.xx seconds - -service_inter_check_delay_method=s - - - -# MAXIMUM SERVICE CHECK SPREAD -# This variable determines the timeframe (in minutes) from the -# program start time that an initial check of all services should -# be completed. Default is 30 minutes. - -max_service_check_spread=30 - - - -# SERVICE CHECK INTERLEAVE FACTOR -# This variable determines how service checks are interleaved. -# Interleaving the service checks allows for a more even -# distribution of service checks and reduced load on remote -# hosts. Setting this value to 1 is equivalent to how versions -# of Nagios previous to 0.0.5 did service checks. Set this -# value to s (smart) for automatic calculation of the interleave -# factor unless you have a specific reason to change it. -# s = Use "smart" interleave factor calculation -# x = Use an interleave factor of x, where x is a -# number greater than or equal to 1. - -service_interleave_factor=s - - - -# HOST INTER-CHECK DELAY METHOD -# This is the method that Nagios should use when initially -# "spreading out" host checks when it starts monitoring. The -# default is to use smart delay calculation, which will try to -# space all host checks out evenly to minimize CPU load. -# Using the dumb setting will cause all checks to be scheduled -# at the same time (with no delay between them)! -# n = None - don't use any delay between checks -# d = Use a "dumb" delay of 1 second between checks -# s = Use "smart" inter-check delay calculation -# x.xx = Use an inter-check delay of x.xx seconds - -host_inter_check_delay_method=s - - - -# MAXIMUM HOST CHECK SPREAD -# This variable determines the timeframe (in minutes) from the -# program start time that an initial check of all hosts should -# be completed. Default is 30 minutes. - -max_host_check_spread=30 - - - -# MAXIMUM CONCURRENT SERVICE CHECKS -# This option allows you to specify the maximum number of -# service checks that can be run in parallel at any given time. -# Specifying a value of 1 for this variable essentially prevents -# any service checks from being parallelized. A value of 0 -# will not restrict the number of concurrent checks that are -# being executed. - -max_concurrent_checks=0 - - - -# SERVICE CHECK REAPER FREQUENCY -# This is the frequency (in seconds!) that Nagios will process -# the results of services that have been checked. - -service_reaper_frequency=10 - - - -# CHECK RESULT BUFFER SLOTS -# This settings is used to tweak the number of items or "slots" that -# the Nagios daemon should allocate to the buffer that holds -# service check results before they are processed. As check results -# are processed by the daemon, they are removed from the buffer. - -check_result_buffer_slots=4096 - - - -# AUTO-RESCHEDULING OPTION -# This option determines whether or not Nagios will attempt to -# automatically reschedule active host and service checks to -# "smooth" them out over time. This can help balance the load on -# the monitoring server. -# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE -# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY - -auto_reschedule_checks=0 - - - -# AUTO-RESCHEDULING INTERVAL -# This option determines how often (in seconds) Nagios will -# attempt to automatically reschedule checks. This option only -# has an effect if the auto_reschedule_checks option is enabled. -# Default is 30 seconds. -# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE -# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY - -auto_rescheduling_interval=30 - - - - -# AUTO-RESCHEDULING WINDOW -# This option determines the "window" of time (in seconds) that -# Nagios will look at when automatically rescheduling checks. -# Only host and service checks that occur in the next X seconds -# (determined by this variable) will be rescheduled. This option -# only has an effect if the auto_reschedule_checks option is -# enabled. Default is 180 seconds (3 minutes). -# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE -# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY - -auto_rescheduling_window=180 - - - -# SLEEP TIME -# This is the number of seconds to sleep between checking for system -# events and service checks that need to be run. - -sleep_time=0.25 - - - -# TIMEOUT VALUES -# These options control how much time Nagios will allow various -# types of commands to execute before killing them off. Options -# are available for controlling maximum time allotted for -# service checks, host checks, event handlers, notifications, the -# ocsp command, and performance data commands. All values are in -# seconds. - -service_check_timeout=60 -host_check_timeout=30 -event_handler_timeout=30 -notification_timeout=30 -ocsp_timeout=5 -perfdata_timeout=5 - - - -# RETAIN STATE INFORMATION -# This setting determines whether or not Nagios will save state -# information for services and hosts before it shuts down. Upon -# startup Nagios will reload all saved service and host state -# information before starting to monitor. This is useful for -# maintaining long-term data on state statistics, etc, but will -# slow Nagios down a bit when it (re)starts. Since its only -# a one-time penalty, I think its well worth the additional -# startup delay. - -retain_state_information=1 - - - -# STATE RETENTION FILE -# This is the file that Nagios should use to store host and -# service state information before it shuts down. The state -# information in this file is also read immediately prior to -# starting to monitor the network when Nagios is restarted. -# This file is used only if the preserve_state_information -# variable is set to 1. - -state_retention_file=/var/log/nagios/retention.dat - - - -# RETENTION DATA UPDATE INTERVAL -# This setting determines how often (in minutes) that Nagios -# will automatically save retention data during normal operation. -# If you set this value to 0, Nagios will not save retention -# data at regular interval, but it will still save retention -# data before shutting down or restarting. If you have disabled -# state retention, this option has no effect. - -retention_update_interval=60 - - - -# USE RETAINED PROGRAM STATE -# This setting determines whether or not Nagios will set -# program status variables based on the values saved in the -# retention file. If you want to use retained program status -# information, set this value to 1. If not, set this value -# to 0. - -use_retained_program_state=1 - - - -# USE RETAINED SCHEDULING INFO -# This setting determines whether or not Nagios will retain -# the scheduling info (next check time) for hosts and services -# based on the values saved in the retention file. If you -# If you want to use retained scheduling info, set this -# value to 1. If not, set this value to 0. - -use_retained_scheduling_info=0 - - - -# INTERVAL LENGTH -# This is the seconds per unit interval as used in the -# host/contact/service configuration files. Setting this to 60 means -# that each interval is one minute long (60 seconds). Other settings -# have not been tested much, so your mileage is likely to vary... - -interval_length=60 - - - -# AGGRESSIVE HOST CHECKING OPTION -# If you don't want to turn on aggressive host checking features, set -# this value to 0 (the default). Otherwise set this value to 1 to -# enable the aggressive check option. Read the docs for more info -# on what aggressive host check is or check out the source code in -# base/checks.c - -use_aggressive_host_checking=0 - - - -# SERVICE CHECK EXECUTION OPTION -# This determines whether or not Nagios will actively execute -# service checks when it initially starts. If this option is -# disabled, checks are not actively made, but Nagios can still -# receive and process passive check results that come in. Unless -# you're implementing redundant hosts or have a special need for -# disabling the execution of service checks, leave this enabled! -# Values: 1 = enable checks, 0 = disable checks - -execute_service_checks=1 - - - -# PASSIVE SERVICE CHECK ACCEPTANCE OPTION -# This determines whether or not Nagios will accept passive -# service checks results when it initially (re)starts. -# Values: 1 = accept passive checks, 0 = reject passive checks - -accept_passive_service_checks=1 - - - -# HOST CHECK EXECUTION OPTION -# This determines whether or not Nagios will actively execute -# host checks when it initially starts. If this option is -# disabled, checks are not actively made, but Nagios can still -# receive and process passive check results that come in. Unless -# you're implementing redundant hosts or have a special need for -# disabling the execution of host checks, leave this enabled! -# Values: 1 = enable checks, 0 = disable checks - -execute_host_checks=1 - - - -# PASSIVE HOST CHECK ACCEPTANCE OPTION -# This determines whether or not Nagios will accept passive -# host checks results when it initially (re)starts. -# Values: 1 = accept passive checks, 0 = reject passive checks - -accept_passive_host_checks=1 - - - -# NOTIFICATIONS OPTION -# This determines whether or not Nagios will sent out any host or -# service notifications when it is initially (re)started. -# Values: 1 = enable notifications, 0 = disable notifications - -enable_notifications=1 - - - -# EVENT HANDLER USE OPTION -# This determines whether or not Nagios will run any host or -# service event handlers when it is initially (re)started. Unless -# you're implementing redundant hosts, leave this option enabled. -# Values: 1 = enable event handlers, 0 = disable event handlers - -enable_event_handlers=1 - - - -# PROCESS PERFORMANCE DATA OPTION -# This determines whether or not Nagios will process performance -# data returned from service and host checks. If this option is -# enabled, host performance data will be processed using the -# host_perfdata_command (defined below) and service performance -# data will be processed using the service_perfdata_command (also -# defined below). Read the HTML docs for more information on -# performance data. -# Values: 1 = process performance data, 0 = do not process performance data - -process_performance_data=0 - - - -# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS -# These commands are run after every host and service check is -# performed. These commands are executed only if the -# enable_performance_data option (above) is set to 1. The command -# argument is the short name of a command definition that you -# define in your host configuration file. Read the HTML docs for -# more information on performance data. - -#host_perfdata_command=process-host-perfdata -#service_perfdata_command=process-service-perfdata - - - -# HOST AND SERVICE PERFORMANCE DATA FILES -# These files are used to store host and service performance data. -# Performance data is only written to these files if the -# enable_performance_data option (above) is set to 1. - -#host_perfdata_file=/tmp/host-perfdata -#service_perfdata_file=/tmp/service-perfdata - - - -# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES -# These options determine what data is written (and how) to the -# performance data files. The templates may contain macros, special -# characters (\t for tab, \r for carriage return, \n for newline) -# and plain text. A newline is automatically added after each write -# to the performance data file. Some examples of what you can do are -# shown below. - -#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$ -#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$ - - - - -# HOST AND SERVICE PERFORMANCE DATA FILE MODES -# This option determines whether or not the host and service -# performance data files are opened in write ("w") or append ("a") -# mode. Unless you are the files are named pipes, you will probably -# want to use the default mode of append ("a"). - -#host_perfdata_file_mode=a -#service_perfdata_file_mode=a - - - -# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL -# These options determine how often (in seconds) the host and service -# performance data files are processed using the commands defined -# below. A value of 0 indicates the files should not be periodically -# processed. - -#host_perfdata_file_processing_interval=0 -#service_perfdata_file_processing_interval=0 - - - -# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS -# These commands are used to periodically process the host and -# service performance data files. The interval at which the -# processing occurs is determined by the options above. - -#host_perfdata_file_processing_command=process-host-perfdata-file -#service_perfdata_file_processing_command=process-service-perfdata-file - - - -# OBSESS OVER SERVICE CHECKS OPTION -# This determines whether or not Nagios will obsess over service -# checks and run the ocsp_command defined below. Unless you're -# planning on implementing distributed monitoring, do not enable -# this option. Read the HTML docs for more information on -# implementing distributed monitoring. -# Values: 1 = obsess over services, 0 = do not obsess (default) - -obsess_over_services=0 - - - -# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND -# This is the command that is run for every service check that is -# processed by Nagios. This command is executed only if the -# obsess_over_service option (above) is set to 1. The command -# argument is the short name of a command definition that you -# define in your host configuration file. Read the HTML docs for -# more information on implementing distributed monitoring. - -#ocsp_command=somecommand - - - -# ORPHANED SERVICE CHECK OPTION -# This determines whether or not Nagios will periodically -# check for orphaned services. Since service checks are not -# rescheduled until the results of their previous execution -# instance are processed, there exists a possibility that some -# checks may never get rescheduled. This seems to be a rare -# problem and should not happen under normal circumstances. -# If you have problems with service checks never getting -# rescheduled, you might want to try enabling this option. -# Values: 1 = enable checks, 0 = disable checks - -check_for_orphaned_services=1 - - - -# SERVICE FRESHNESS CHECK OPTION -# This option determines whether or not Nagios will periodically -# check the "freshness" of service results. Enabling this option -# is useful for ensuring passive checks are received in a timely -# manner. -# Values: 1 = enabled freshness checking, 0 = disable freshness checking - -check_service_freshness=1 - - - -# SERVICE FRESHNESS CHECK INTERVAL -# This setting determines how often (in seconds) Nagios will -# check the "freshness" of service check results. If you have -# disabled service freshness checking, this option has no effect. - -service_freshness_check_interval=60 - - - -# HOST FRESHNESS CHECK OPTION -# This option determines whether or not Nagios will periodically -# check the "freshness" of host results. Enabling this option -# is useful for ensuring passive checks are received in a timely -# manner. -# Values: 1 = enabled freshness checking, 0 = disable freshness checking - -check_host_freshness=0 - - - -# HOST FRESHNESS CHECK INTERVAL -# This setting determines how often (in seconds) Nagios will -# check the "freshness" of host check results. If you have -# disabled host freshness checking, this option has no effect. - -host_freshness_check_interval=60 - - - -# AGGREGATED STATUS UPDATES -# This option determines whether or not Nagios will -# aggregate updates of host, service, and program status -# data. Normally, status data is updated immediately when -# a change occurs. This can result in high CPU loads if -# you are monitoring a lot of services. If you want Nagios -# to only refresh status data every few seconds, disable -# this option. -# Values: 1 = enable aggregate updates, 0 = disable aggregate updates - -aggregate_status_updates=1 - - - -# AGGREGATED STATUS UPDATE INTERVAL -# Combined with the aggregate_status_updates option, -# this option determines the frequency (in seconds!) that -# Nagios will periodically dump program, host, and -# service status data. If you are not using aggregated -# status data updates, this option has no effect. - -status_update_interval=15 - - - -# FLAP DETECTION OPTION -# This option determines whether or not Nagios will try -# and detect hosts and services that are "flapping". -# Flapping occurs when a host or service changes between -# states too frequently. When Nagios detects that a -# host or service is flapping, it will temporarily suppress -# notifications for that host/service until it stops -# flapping. Flap detection is very experimental, so read -# the HTML documentation before enabling this feature! -# Values: 1 = enable flap detection -# 0 = disable flap detection (default) - -enable_flap_detection=0 - - - -# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES -# Read the HTML documentation on flap detection for -# an explanation of what this option does. This option -# has no effect if flap detection is disabled. - -low_service_flap_threshold=5.0 -high_service_flap_threshold=20.0 -low_host_flap_threshold=5.0 -high_host_flap_threshold=20.0 - - - -# DATE FORMAT OPTION -# This option determines how short dates are displayed. Valid options -# include: -# us (MM-DD-YYYY HH:MM:SS) -# euro (DD-MM-YYYY HH:MM:SS) -# iso8601 (YYYY-MM-DD HH:MM:SS) -# strict-iso8601 (YYYY-MM-DDTHH:MM:SS) -# - -date_format=us - - - -# P1.PL FILE LOCATION -# This value determines where the p1.pl perl script (used by the -# embedded Perl interpreter) is located. If you didn't compile -# Nagios with embedded Perl support, this option has no effect. - -p1_file=/usr/sbin/p1.pl - - - -# ILLEGAL OBJECT NAME CHARACTERS -# This option allows you to specify illegal characters that cannot -# be used in host names, service descriptions, or names of other -# object types. - -illegal_object_name_chars=`~!$%^&*|'"<>?,()= - - - -# ILLEGAL MACRO OUTPUT CHARACTERS -# This option allows you to specify illegal characters that are -# stripped from macros before being used in notifications, event -# handlers, etc. This DOES NOT affect macros used in service or -# host check commands. -# The following macros are stripped of the characters you specify: -# $HOSTOUTPUT$ -# $HOSTPERFDATA$ -# $HOSTACKAUTHOR$ -# $HOSTACKCOMMENT$ -# $SERVICEOUTPUT$ -# $SERVICEPERFDATA$ -# $SERVICEACKAUTHOR$ -# $SERVICEACKCOMMENT$ - -illegal_macro_output_chars=`~$&|'"<> - - - -# REGULAR EXPRESSION MATCHING -# This option controls whether or not regular expression matching -# takes place in the object config files. Regular expression -# matching is used to match host, hostgroup, service, and service -# group names/descriptions in some fields of various object types. -# Values: 1 = enable regexp matching, 0 = disable regexp matching - -use_regexp_matching=0 - - - -# "TRUE" REGULAR EXPRESSION MATCHING -# This option controls whether or not "true" regular expression -# matching takes place in the object config files. This option -# only has an effect if regular expression matching is enabled -# (see above). If this option is DISABLED, regular expression -# matching only occurs if a string contains wildcard characters -# (* and ?). If the option is ENABLED, regexp matching occurs -# all the time (which can be annoying). -# Values: 1 = enable true matching, 0 = disable true matching - -use_true_regexp_matching=0 - - - - -# ADMINISTRATOR EMAIL ADDRESS -# The email address of the administrator of *this* machine (the one -# doing the monitoring). Nagios never uses this value itself, but -# you can access this value by using the $ADMINEMAIL$ macro in your -# notification commands. - -admin_email=nagios - - - -# ADMINISTRATOR PAGER NUMBER/ADDRESS -# The pager number/address for the administrator of *this* machine. -# Nagios never uses this value itself, but you can access this -# value by using the $ADMINPAGER$ macro in your notification -# commands. - -admin_pager=pagenagios - - - -# DAEMON CORE DUMP OPTION -# This option determines whether or not Nagios is allowed to create -# a core dump when it runs as a daemon. Note that it is generally -# considered bad form to allow this, but it may be useful for -# debugging purposes. -# Values: 1 - Allow core dumps -# 0 - Do not allow core dumps (default) - -daemon_dumps_core=0 - - - diff --git a/templates/service.erb b/templates/service.erb deleted file mode 100644 index 5799aca..0000000 --- a/templates/service.erb +++ /dev/null @@ -1,7 +0,0 @@ -define service { - host_name <%= nagios2_host_name %> - service_description <%= name %> - check_command <%= real_check_command %> - use generic-service -} - |