#### Contents of the preconfiguration file (for squeeze) ### Localization # Locale sets language and country. d-i debian-installer/locale string en_US # Keyboard selection. #d-i console-tools/archs select at d-i keymap select us # Example for a different keyboard architecture #d-i console-keymaps-usb/keymap select mac-usb-us ### Network configuration # netcfg will choose an interface that has link if possible. This makes it # skip displaying a list if there is more than one interface. d-i netcfg/choose_interface select auto # To pick a particular interface instead: #d-i netcfg/choose_interface select eth1 # If you have a slow dhcp server and the installer times out waiting for # it, this might be useful. #d-i netcfg/dhcp_timeout string 60 # If you prefer to configure the network manually, uncomment this line and # the static network configuration below. #d-i netcfg/disable_dhcp boolean true # If you want the preconfiguration file to work on systems both with and # without a dhcp server, uncomment these lines and the static network # configuration below. #d-i netcfg/dhcp_failed note #d-i netcfg/dhcp_options select Configure network manually # Static network configuration. #d-i netcfg/get_nameservers string 192.168.1.1 #d-i netcfg/get_ipaddress string 192.168.1.42 #d-i netcfg/get_netmask string 255.255.255.0 #d-i netcfg/get_gateway string 192.168.1.1 #d-i netcfg/confirm_static boolean true # Any hostname and domain names assigned from dhcp take precedence over # values set here. However, setting the values still prevents the questions # from being shown, even if values come from dhcp. #d-i netcfg/get_hostname string vagrant d-i netcfg/get_domain string vagrantup.com # Disable that annoying WEP key dialog. d-i netcfg/wireless_wep string # The wacky dhcp hostname that some ISPs use as a password of sorts. #d-i netcfg/dhcp_hostname string radish # If non-free firmware is needed for the network or other hardware, you can # configure the installer to always try to load it, without prompting. Or # change to false to disable asking. #d-i hw-detect/load_firmware boolean true ### Network console # Use the following settings if you wish to make use of the network-console # component for remote installation over SSH. This only makes sense if you # intend to perform the remainder of the installation manually. #d-i anna/choose_modules string network-console #d-i network-console/password password r00tme #d-i network-console/password-again password r00tme ### Mirror settings # If you select ftp, the mirror/country string does not need to be set. #d-i mirror/protocol string ftp d-i mirror/country string manual d-i mirror/http/hostname string http.debian.net d-i mirror/http/directory string /debian d-i mirror/http/proxy string # Suite to install. #d-i mirror/suite string testing # Suite to use for loading installer components (optional). #d-i mirror/udeb/suite string testing ### Clock and time zone setup # Controls whether or not the hardware clock is set to UTC. d-i clock-setup/utc boolean true # You may set this to any valid setting for $TZ; see the contents of # /usr/share/zoneinfo/ for valid values. d-i time/zone string UTC # Controls whether to use NTP to set the clock during the install d-i clock-setup/ntp boolean true # NTP server to use. The default is almost always fine here. #d-i clock-setup/ntp-server string ntp.example.com ### Partitioning # If the system has free space you can choose to only partition that space. #d-i partman-auto/init_automatically_partition select biggest_free # Alternatively, you can specify a disk to partition. The device name must # be given in traditional non-devfs format. # Note: A disk must be specified, unless the system has only one disk. # For example, to use the first SCSI/SATA hard disk: d-i partman-auto/disk string /dev/sda # In addition, you'll need to specify the method to use. # The presently available methods are: "regular", "lvm" and "crypto" d-i partman-auto/method string lvm # If one of the disks that are going to be automatically partitioned # contains an old LVM configuration, the user will normally receive a # warning. This can be preseeded away... d-i partman-lvm/device_remove_lvm boolean true # The same applies to pre-existing software RAID array: d-i partman-md/device_remove_md boolean true # And the same goes for the confirmation to write the lvm partitions. d-i partman-lvm/confirm boolean true d-i partman-lvm/confirm_nooverwrite boolean true d-i partman/choose_partition select finish d-i partman-auto-lvm/guided_size string max # You can choose one of the three predefined partitioning recipes: # - atomic: all files in one partition # - home: separate /home partition # - multi: separate /home, /usr, /var, and /tmp partitions d-i partman-auto/choose_recipe select atomic d-i partman/default_filesystem string ext3 # Or provide a recipe of your own... # The recipe format is documented in the file devel/partman-auto-recipe.txt. # If you have a way to get a recipe file into the d-i environment, you can # just point at it. #d-i partman-auto/expert_recipe_file string /hd-media/recipe # If not, you can put an entire recipe into the preconfiguration file in one # (logical) line. This example creates a small /boot partition, suitable # swap, and uses the rest of the space for the root partition: #d-i partman-auto/expert_recipe string \ # boot-root :: \ # 40 50 100 ext3 \ # $primary{ } $bootable{ } \ # method{ format } format{ } \ # use_filesystem{ } filesystem{ ext3 } \ # mountpoint{ /boot } \ # . \ # 500 10000 1000000000 ext3 \ # method{ format } format{ } \ # use_filesystem{ } filesystem{ ext3 } \ # mountpoint{ / } \ # . \ # 64 512 300% linux-swap \ # method{ swap } format{ } \ # . #The preseed line that "selects finish" needs to be in a certain order in your preseed, the example-preseed does not follow this. #http://ubuntuforums.org/archive/index.php/t-1504045.html # This makes partman automatically partition without confirmation, provided # that you told it what to do using one of the methods above. d-i partman/confirm_write_new_label boolean true d-i partman/confirm boolean true d-i partman/confirm_nooverwrite boolean true ### Base system installation # Select the initramfs generator used to generate the initrd for 2.6 kernels. #d-i base-installer/kernel/linux/initramfs-generators string yaird # The kernel image (meta) package to be installed; "none" can be used if no # kernel is to be installed. #d-i base-installer/kernel/image string linux-image-2.6-486 ### Account setup # Skip creation of a root account (normal user account will be able to # use sudo). d-i passwd/root-login boolean true # Alternatively, to skip creation of a normal user account. #d-i passwd/make-user boolean false # Root password, either in clear text d-i passwd/root-password password vagrant d-i passwd/root-password-again password vagrant # or encrypted using an MD5 hash. #d-i passwd/root-password-crypted password [MD5 hash] # To create a normal user account. d-i passwd/user-fullname string Vagrant User d-i passwd/username string vagrant # Normal user's password, either in clear text d-i passwd/user-password password vagrant d-i passwd/user-password-again password vagrant # or encrypted using an MD5 hash. #d-i passwd/user-password-crypted password [MD5 hash] # Create the first user with the specified UID instead of the default. #d-i passwd/user-uid string 1010 d-i user-setup/encrypt-home boolean false d-i user-setup/allow-password-weak boolean true # The user account will be added to some standard initial groups. To # override that, use this. d-i passwd/user-default-groups string audio cdrom video admin sudo ### Apt setup # You can choose to install non-free and contrib software. #d-i apt-setup/non-free boolean true #d-i apt-setup/contrib boolean true # Uncomment this if you don't want to use a network mirror. #d-i apt-setup/use_mirror boolean false # Select which update services to use; define the mirrors to be used. # Values shown below are the normal defaults. #d-i apt-setup/services-select multiselect security, volatile #d-i apt-setup/security_host string security.debian.org #d-i apt-setup/volatile_host string volatile.debian.org # By default the installer requires that repositories be authenticated # using a known gpg key. This setting can be used to disable that # authentication. Warning: Insecure, not recommended. #d-i debian-installer/allow_unauthenticated string true ### Package selection tasksel tasksel/first multiselect standard # If the desktop task is selected, install the kde and xfce desktops # instead of the default gnome desktop. #tasksel tasksel/desktop multiselect kde, xfce # Individual additional packages to install d-i pkgsel/include string openssh-server ntp acpid sudo bzip2 # Whether to upgrade packages after debootstrap. # Allowed values: none, safe-upgrade, full-upgrade d-i pkgsel/upgrade select none # Some versions of the installer can report back on what software you have # installed, and what software you use. The default is not to report back, # but sending reports helps the project determine what software is most # popular and include it on CDs. popularity-contest popularity-contest/participate boolean false ### Boot loader installation # Grub is the default boot loader (for x86). If you want lilo installed # instead, uncomment this: #d-i grub-installer/skip boolean true # To also skip installing lilo, and install no bootloader, uncomment this # too: #d-i lilo-installer/skip boolean true # This is fairly safe to set, it makes grub install automatically to the MBR # if no other operating system is detected on the machine. d-i grub-installer/only_debian boolean true # This one makes grub-installer install to the MBR if it also finds some other # OS, which is less safe as it might not be able to boot that other OS. d-i grub-installer/with_other_os boolean true # Alternatively, if you want to install to a location other than the mbr, # uncomment and edit these lines: #d-i grub-installer/only_debian boolean false #d-i grub-installer/with_other_os boolean false #d-i grub-installer/bootdev string (hd0,0) # To install grub to multiple disks: #d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0) # Optional password for grub, either in clear text #d-i grub-installer/password password r00tme #d-i grub-installer/password-again password r00tme # or encrypted using an MD5 hash, see grub-md5-crypt(8). #d-i grub-installer/password-crypted password [MD5 hash] ### Finishing up the installation # During installations from serial console, the regular virtual consoles # (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next # line to prevent this. #d-i finish-install/keep-consoles boolean true # Avoid that last message about the install being complete. d-i finish-install/reboot_in_progress note # This will prevent the installer from ejecting the CD during the reboot, # which is useful in some situations. #d-i cdrom-detect/eject boolean false # This is how to make the installer shutdown when finished, but not # reboot into the installed system. #d-i debian-installer/exit/halt boolean true # This will power off the machine instead of just halting it. #d-i debian-installer/exit/poweroff boolean true ### Preseeding other packages # Depending on what software you choose to install, or if things go wrong # during the installation process, it's possible that other questions may # be asked. You can preseed those too, of course. To get a list of every # possible question that could be asked during an install, do an # installation, and then run these commands: # debconf-get-selections --installer > file # debconf-get-selections >> file #### Advanced options ### Running custom commands during the installation # d-i preseeding is inherently not secure. Nothing in the installer checks # for attempts at buffer overflows or other exploits of the values of a # preconfiguration file like this one. Only use preconfiguration files from # trusted locations! To drive that home, and because it's generally useful, # here's a way to run any shell command you'd like inside the installer, # automatically. # This first command is run as early as possible, just after # preseeding is read. # Prevent packaged version of VirtualBox Guest Additions being installed: d-i preseed/early_command string sed -i \ '/in-target/idiscover(){/sbin/discover|grep -v VirtualBox;}' \ /usr/lib/pre-pkgsel.d/20install-hwpackages # This command is run just before the install finishes, but when there is # still a usable /target directory. You can chroot to /target and use it # directly, or use the apt-install and in-target commands to easily install # packages and run commands in the target system.