diff options
| -rw-r--r-- | README.md | 10 | ||||
| -rw-r--r-- | wheezy/DEBUG | 27 | ||||
| -rw-r--r-- | wheezy/base.sh | 28 | ||||
| -rw-r--r-- | wheezy/cleanup-virtualbox.sh | 4 | ||||
| -rw-r--r-- | wheezy/cleanup.sh | 17 | ||||
| -rw-r--r-- | wheezy/definition.rb | 47 | ||||
| -rw-r--r-- | wheezy/preseed.cfg | 315 | ||||
| -rw-r--r-- | wheezy/ruby.sh | 2 | ||||
| -rw-r--r-- | wheezy/vagrant.sh | 18 | ||||
| -rw-r--r-- | wheezy/virtualbox.sh | 13 | ||||
| -rw-r--r-- | wheezy/zerodisk.sh | 3 |
11 files changed, 484 insertions, 0 deletions
diff --git a/README.md b/README.md new file mode 100644 index 0000000..18aa062 --- /dev/null +++ b/README.md @@ -0,0 +1,10 @@ +This repository contains *minimal* Debian vagrant definitions. + +That means a base installation, with no puppet, chef, ruby, ruby gems or +libraries. + +The installer used is the latest version of the installer and after +the system has been installed, the packages have been updated to the +latest version at the time the system was built. + + diff --git a/wheezy/DEBUG b/wheezy/DEBUG new file mode 100644 index 0000000..59388ff --- /dev/null +++ b/wheezy/DEBUG @@ -0,0 +1,27 @@ +# Logfile created on 2012-10-23 11:06:00 -0400 by logger.rb/25413 +2012-10-23 11:06:00 -0400 - environment - [veewee] Loading configuration... +2012-10-23 11:06:00 -0400 - - [veewee] Initializing veewee config object +2012-10-23 11:06:00 -0400 - - [veewee] No configfile found +2012-10-23 11:06:00 -0400 - environment - [veewee] Environment initialized (#<Veewee::Environment:0x00000002d69780>) +2012-10-23 11:06:00 -0400 - environment - [veewee] - cwd : /home/micah/dev/veewee/definitions/debian-wheezy +2012-10-23 11:06:00 -0400 - environment - [veewee] - veewee_filename : Veeweefile +2012-10-23 11:06:00 -0400 - environment - [veewee] - loglevel : info +2012-10-23 11:06:00 -0400 - environment - [veewee] - definition_dir : /home/micah/dev/veewee/definitions/debian-wheezy/definitions +2012-10-23 11:06:00 -0400 - environment - [veewee] - template_path : ["/home/micah/dev/veewee/templates", "templates"] +2012-10-23 11:06:00 -0400 - environment - [veewee] - iso_dir : /home/micah/dev/veewee/definitions/debian-wheezy/iso +2012-10-23 11:06:00 -0400 - environment - [veewee] - validation_dir : /home/micah/dev/veewee/validation +2012-10-23 11:06:00 -0400 - environment - [veewee] - tmp_dir : /home/micah/dev/veewee/definitions/debian-wheezy/tmp +2012-10-23 11:06:00 -0400 - - [veewee] Reading ostype yamlfile /home/micah/dev/veewee/lib/veewee/config/ostypes.yml +2012-10-23 11:06:00 -0400 - - [veewee] Command: "VBoxManage -v" +2012-10-23 11:06:00 -0400 - - [veewee] Output: +2012-10-23 11:06:00 -0400 - - [veewee] ------- +2012-10-23 11:06:00 -0400 - - [veewee] 4.1.18_Debianr78361 +2012-10-23 11:06:00 -0400 - - [veewee] Loading definition directory /home/micah/dev/veewee/definitions/debian-wheezy/definitions/debian-wheezy +2012-10-23 11:06:00 -0400 - - [veewee] Command: "VBoxManage --version" +2012-10-23 11:06:00 -0400 - - [veewee] Output: +2012-10-23 11:06:00 -0400 - - [veewee] ------- +2012-10-23 11:06:00 -0400 - - [veewee] 4.1.18_Debianr78361 +2012-10-23 11:06:00 -0400 - - [veewee] Command: "VBoxManage --version" +2012-10-23 11:06:00 -0400 - - [veewee] Output: +2012-10-23 11:06:00 -0400 - - [veewee] ------- +2012-10-23 11:06:00 -0400 - - [veewee] 4.1.18_Debianr78361 diff --git a/wheezy/base.sh b/wheezy/base.sh new file mode 100644 index 0000000..f7d646e --- /dev/null +++ b/wheezy/base.sh @@ -0,0 +1,28 @@ +# Update the box +apt-get -y update +apt-get -y install linux-headers-$(uname -r) build-essential +apt-get -y install zlib1g-dev libssl-dev libreadline5-dev +apt-get -y install curl unzip +apt-get -y dist-upgrade +apt-get clean + +# Set up sudo +cp /etc/sudoers /etc/sudoers.orig +sed -i -e 's/%sudo.*ALL=(ALL:ALL) ALL/%sudo ALL=NOPASSWD:ALL/g' /etc/sudoers + +# Tweak sshd to prevent DNS resolution (speed up logins) +echo 'UseDNS no' >> /etc/ssh/sshd_config + +# Remove 5s grub timeout to speed up booting +echo <<EOF > /etc/default/grub +# If you change this file, run 'update-grub' afterwards to update +# /boot/grub/grub.cfg. + +GRUB_DEFAULT=0 +GRUB_TIMEOUT=0 +GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` +GRUB_CMDLINE_LINUX_DEFAULT="quiet" +GRUB_CMDLINE_LINUX="debian-installer=en_US" +EOF + +update-grub diff --git a/wheezy/cleanup-virtualbox.sh b/wheezy/cleanup-virtualbox.sh new file mode 100644 index 0000000..ccc6d5a --- /dev/null +++ b/wheezy/cleanup-virtualbox.sh @@ -0,0 +1,4 @@ +# Cleanup Virtualbox +VBOX_VERSION=$(cat .vbox_version) +VBOX_ISO=VBoxGuestAdditions_$VBOX_VERSION.iso +rm $VBOX_ISO diff --git a/wheezy/cleanup.sh b/wheezy/cleanup.sh new file mode 100644 index 0000000..bf8a619 --- /dev/null +++ b/wheezy/cleanup.sh @@ -0,0 +1,17 @@ +# Clean up +apt-get -y remove linux-headers-$(uname -r) build-essential +apt-get -y autoremove + +# Removing leftover leases and persistent rules +echo "cleaning up dhcp leases" +rm /var/lib/dhcp/* + +# Make sure Udev doesn't block our network +echo "cleaning up udev rules" +rm /etc/udev/rules.d/70-persistent-net.rules +mkdir /etc/udev/rules.d/70-persistent-net.rules +rm -rf /dev/.udev/ +rm /lib/udev/rules.d/75-persistent-net-generator.rules + +echo "Adding a 2 sec delay to the interface up, to make the dhclient happy" +echo "pre-up sleep 2" >> /etc/network/interfaces diff --git a/wheezy/definition.rb b/wheezy/definition.rb new file mode 100644 index 0000000..8c0cbac --- /dev/null +++ b/wheezy/definition.rb @@ -0,0 +1,47 @@ +Veewee::Definition.declare({ + :cpu_count => '1', + :memory_size=> '256', + :disk_size => '10140', :disk_format => 'VDI', :hostiocache => 'on', + :os_type_id => 'Debian_64', + :iso_file => "debian-wheezy-DI-b2-amd64-netinst.iso", + :iso_src => "http://cdimage.debian.org/cdimage/wheezy_di_beta3/amd64/iso-cd/debian-wheezy-DI-b3-amd64-netinst.iso", + :iso_md5 => "e9f2479c43a623dd8b9c0bc95d8460ce", + :iso_download_timeout => "1000", + :boot_wait => "10", :boot_cmd_sequence => [ + '<Esc>', + 'install ', + 'preseed/url=http://%IP%:%PORT%/preseed.cfg ', + 'debian-installer=en_US ', + 'auto ', + 'locale=en_US ', + 'kbd-chooser/method=us ', + 'netcfg/get_hostname=%NAME% ', + 'netcfg/get_domain=vagrantup.com ', + 'fb=false ', + 'debconf/frontend=noninteractive ', + 'console-setup/ask_detect=false ', + 'console-keymaps-at/keymap=us ', + '<Enter>' + ], + :kickstart_port => "7122", + :kickstart_timeout => "10000", + :kickstart_file => "preseed.cfg", + :ssh_login_timeout => "10000", + :ssh_user => "vagrant", + :ssh_password => "vagrant", + :ssh_key => "", + :ssh_host_port => "7222", + :ssh_guest_port => "22", + :sudo_cmd => "echo '%p'|sudo -S sh '%f'", + :shutdown_cmd => "halt -p", + :postinstall_files => [ + "base.sh", + "vagrant.sh", + "virtualbox.sh", + "ruby.sh", + "cleanup-virtualbox.sh", + "cleanup.sh", + "zerodisk.sh" + ], + :postinstall_timeout => "10000" +}) diff --git a/wheezy/preseed.cfg b/wheezy/preseed.cfg new file mode 100644 index 0000000..9e1dddc --- /dev/null +++ b/wheezy/preseed.cfg @@ -0,0 +1,315 @@ +#### Contents of the preconfiguration file (for squeeze) +### Localization +# Locale sets language and country. +d-i debian-installer/locale string en_US + +# Keyboard selection. +#d-i console-tools/archs select at +d-i console-keymaps-at/keymap select us +# Example for a different keyboard architecture +#d-i console-keymaps-usb/keymap select mac-usb-us + +### Network configuration +# netcfg will choose an interface that has link if possible. This makes it +# skip displaying a list if there is more than one interface. +d-i netcfg/choose_interface select auto + +# To pick a particular interface instead: +#d-i netcfg/choose_interface select eth1 + +# If you have a slow dhcp server and the installer times out waiting for +# it, this might be useful. +#d-i netcfg/dhcp_timeout string 60 + +# If you prefer to configure the network manually, uncomment this line and +# the static network configuration below. +#d-i netcfg/disable_dhcp boolean true + +# If you want the preconfiguration file to work on systems both with and +# without a dhcp server, uncomment these lines and the static network +# configuration below. +#d-i netcfg/dhcp_failed note +#d-i netcfg/dhcp_options select Configure network manually + +# Static network configuration. +#d-i netcfg/get_nameservers string 192.168.1.1 +#d-i netcfg/get_ipaddress string 192.168.1.42 +#d-i netcfg/get_netmask string 255.255.255.0 +#d-i netcfg/get_gateway string 192.168.1.1 +#d-i netcfg/confirm_static boolean true + +# Any hostname and domain names assigned from dhcp take precedence over +# values set here. However, setting the values still prevents the questions +# from being shown, even if values come from dhcp. +#d-i netcfg/get_hostname string vagrant +d-i netcfg/get_domain string vagrantup.com + +# Disable that annoying WEP key dialog. +d-i netcfg/wireless_wep string +# The wacky dhcp hostname that some ISPs use as a password of sorts. +#d-i netcfg/dhcp_hostname string radish + +# If non-free firmware is needed for the network or other hardware, you can +# configure the installer to always try to load it, without prompting. Or +# change to false to disable asking. +#d-i hw-detect/load_firmware boolean true + +### Network console +# Use the following settings if you wish to make use of the network-console +# component for remote installation over SSH. This only makes sense if you +# intend to perform the remainder of the installation manually. +#d-i anna/choose_modules string network-console +#d-i network-console/password password r00tme +#d-i network-console/password-again password r00tme + +### Mirror settings +# If you select ftp, the mirror/country string does not need to be set. +#d-i mirror/protocol string ftp +d-i mirror/country string manual +d-i mirror/http/hostname string 192.168.1.106:9999 +d-i mirror/http/directory string /debian +d-i mirror/http/proxy string + +# Suite to install. +#d-i mirror/suite string testing +# Suite to use for loading installer components (optional). +#d-i mirror/udeb/suite string testing + +### Clock and time zone setup +# Controls whether or not the hardware clock is set to UTC. +d-i clock-setup/utc boolean true + +# You may set this to any valid setting for $TZ; see the contents of +# /usr/share/zoneinfo/ for valid values. +d-i time/zone string UTC + +# Controls whether to use NTP to set the clock during the install +d-i clock-setup/ntp boolean true +# NTP server to use. The default is almost always fine here. +#d-i clock-setup/ntp-server string ntp.example.com + +### Partitioning +# If the system has free space you can choose to only partition that space. +#d-i partman-auto/init_automatically_partition select biggest_free + +# Alternatively, you can specify a disk to partition. The device name must +# be given in traditional non-devfs format. +# Note: A disk must be specified, unless the system has only one disk. +# For example, to use the first SCSI/SATA hard disk: +d-i partman-auto/disk string /dev/sda +# In addition, you'll need to specify the method to use. +# The presently available methods are: "regular", "lvm" and "crypto" +d-i partman-auto/method string lvm + +# If one of the disks that are going to be automatically partitioned +# contains an old LVM configuration, the user will normally receive a +# warning. This can be preseeded away... +d-i partman-lvm/device_remove_lvm boolean true +# The same applies to pre-existing software RAID array: +d-i partman-md/device_remove_md boolean true + +# And the same goes for the confirmation to write the lvm partitions. +d-i partman-lvm/confirm boolean true +d-i partman-lvm/confirm_nooverwrite boolean true + + +d-i partman/choose_partition select finish +d-i partman-auto-lvm/guided_size string max + +# You can choose one of the three predefined partitioning recipes: +# - atomic: all files in one partition +# - home: separate /home partition +# - multi: separate /home, /usr, /var, and /tmp partitions +d-i partman-auto/choose_recipe select atomic +d-i partman/default_filesystem string ext3 + +# Or provide a recipe of your own... +# The recipe format is documented in the file devel/partman-auto-recipe.txt. +# If you have a way to get a recipe file into the d-i environment, you can +# just point at it. +#d-i partman-auto/expert_recipe_file string /hd-media/recipe + +# If not, you can put an entire recipe into the preconfiguration file in one +# (logical) line. This example creates a small /boot partition, suitable +# swap, and uses the rest of the space for the root partition: +#d-i partman-auto/expert_recipe string \ +# boot-root :: \ +# 40 50 100 ext3 \ +# $primary{ } $bootable{ } \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext3 } \ +# mountpoint{ /boot } \ +# . \ +# 500 10000 1000000000 ext3 \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext3 } \ +# mountpoint{ / } \ +# . \ +# 64 512 300% linux-swap \ +# method{ swap } format{ } \ +# . + +#The preseed line that "selects finish" needs to be in a certain order in your preseed, the example-preseed does not follow this. +#http://ubuntuforums.org/archive/index.php/t-1504045.html + +# This makes partman automatically partition without confirmation, provided +# that you told it what to do using one of the methods above. +d-i partman/confirm_write_new_label boolean true +d-i partman/confirm boolean true +d-i partman/confirm_nooverwrite boolean true + + +### Base system installation +# Select the initramfs generator used to generate the initrd for 2.6 kernels. +#d-i base-installer/kernel/linux/initramfs-generators string yaird + +# The kernel image (meta) package to be installed; "none" can be used if no +# kernel is to be installed. +#d-i base-installer/kernel/image string linux-image-2.6-486 + +### Account setup +# Skip creation of a root account (normal user account will be able to +# use sudo). +d-i passwd/root-login boolean false +# Alternatively, to skip creation of a normal user account. +#d-i passwd/make-user boolean false + +# Root password, either in clear text +d-i passwd/root-password password vagrant +d-i passwd/root-password-again password vagrant +# or encrypted using an MD5 hash. +#d-i passwd/root-password-crypted password [MD5 hash] + +# To create a normal user account. +d-i passwd/user-fullname string Vagrant User +d-i passwd/username string vagrant +# Normal user's password, either in clear text +d-i passwd/user-password password vagrant +d-i passwd/user-password-again password vagrant +# or encrypted using an MD5 hash. +#d-i passwd/user-password-crypted password [MD5 hash] +# Create the first user with the specified UID instead of the default. +#d-i passwd/user-uid string 1010 +d-i user-setup/encrypt-home boolean false +d-i user-setup/allow-password-weak boolean true + +# The user account will be added to some standard initial groups. To +# override that, use this. +d-i passwd/user-default-groups string audio cdrom video admin + +### Apt setup +# You can choose to install non-free and contrib software. +#d-i apt-setup/non-free boolean true +#d-i apt-setup/contrib boolean true +# Uncomment this if you don't want to use a network mirror. +#d-i apt-setup/use_mirror boolean false +# Select which update services to use; define the mirrors to be used. +# Values shown below are the normal defaults. +#d-i apt-setup/services-select multiselect security, volatile +#d-i apt-setup/security_host string security.debian.org +#d-i apt-setup/volatile_host string volatile.debian.org + + +# By default the installer requires that repositories be authenticated +# using a known gpg key. This setting can be used to disable that +# authentication. Warning: Insecure, not recommended. +#d-i debian-installer/allow_unauthenticated string true + +### Package selection +tasksel tasksel/first multiselect standard +# If the desktop task is selected, install the kde and xfce desktops +# instead of the default gnome desktop. +#tasksel tasksel/desktop multiselect kde, xfce + +# Individual additional packages to install +d-i pkgsel/include string openssh-server ntp acpid sudo bzip2 + +# Whether to upgrade packages after debootstrap. +# Allowed values: none, safe-upgrade, full-upgrade +d-i pkgsel/upgrade select none + +# Some versions of the installer can report back on what software you have +# installed, and what software you use. The default is not to report back, +# but sending reports helps the project determine what software is most +# popular and include it on CDs. +popularity-contest popularity-contest/participate boolean false + +### Boot loader installation +# Grub is the default boot loader (for x86). If you want lilo installed +# instead, uncomment this: +#d-i grub-installer/skip boolean true +# To also skip installing lilo, and install no bootloader, uncomment this +# too: +#d-i lilo-installer/skip boolean true + +# This is fairly safe to set, it makes grub install automatically to the MBR +# if no other operating system is detected on the machine. +d-i grub-installer/only_debian boolean true + +# This one makes grub-installer install to the MBR if it also finds some other +# OS, which is less safe as it might not be able to boot that other OS. +d-i grub-installer/with_other_os boolean true + +# Alternatively, if you want to install to a location other than the mbr, +# uncomment and edit these lines: +#d-i grub-installer/only_debian boolean false +#d-i grub-installer/with_other_os boolean false +#d-i grub-installer/bootdev string (hd0,0) +# To install grub to multiple disks: +#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0) + +# Optional password for grub, either in clear text +#d-i grub-installer/password password r00tme +#d-i grub-installer/password-again password r00tme +# or encrypted using an MD5 hash, see grub-md5-crypt(8). +#d-i grub-installer/password-crypted password [MD5 hash] + +### Finishing up the installation +# During installations from serial console, the regular virtual consoles +# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next +# line to prevent this. +#d-i finish-install/keep-consoles boolean true + +# Avoid that last message about the install being complete. +d-i finish-install/reboot_in_progress note + +# This will prevent the installer from ejecting the CD during the reboot, +# which is useful in some situations. +#d-i cdrom-detect/eject boolean false + +# This is how to make the installer shutdown when finished, but not +# reboot into the installed system. +#d-i debian-installer/exit/halt boolean true +# This will power off the machine instead of just halting it. +#d-i debian-installer/exit/poweroff boolean true + +### Preseeding other packages +# Depending on what software you choose to install, or if things go wrong +# during the installation process, it's possible that other questions may +# be asked. You can preseed those too, of course. To get a list of every +# possible question that could be asked during an install, do an +# installation, and then run these commands: +# debconf-get-selections --installer > file +# debconf-get-selections >> file + + +#### Advanced options +### Running custom commands during the installation +# d-i preseeding is inherently not secure. Nothing in the installer checks +# for attempts at buffer overflows or other exploits of the values of a +# preconfiguration file like this one. Only use preconfiguration files from +# trusted locations! To drive that home, and because it's generally useful, +# here's a way to run any shell command you'd like inside the installer, +# automatically. + +# This first command is run as early as possible, just after +# preseeding is read. +# Prevent packaged version of VirtualBox Guest Additions being installed: +d-i preseed/early_command string sed -i \ + '/in-target/idiscover(){/sbin/discover|grep -v VirtualBox;}' \ + /usr/lib/pre-pkgsel.d/20install-hwpackages + +# This command is run just before the install finishes, but when there is +# still a usable /target directory. You can chroot to /target and use it +# directly, or use the apt-install and in-target commands to easily install +# packages and run commands in the target system. diff --git a/wheezy/ruby.sh b/wheezy/ruby.sh new file mode 100644 index 0000000..a2c0608 --- /dev/null +++ b/wheezy/ruby.sh @@ -0,0 +1,2 @@ +# Install Ruby from packages + diff --git a/wheezy/vagrant.sh b/wheezy/vagrant.sh new file mode 100644 index 0000000..b503ad5 --- /dev/null +++ b/wheezy/vagrant.sh @@ -0,0 +1,18 @@ +# Set up Vagrant. + +date > /etc/vagrant_box_build_time + +# Create the user vagrant with password vagrant +useradd -G sudo -p $(perl -e'print crypt("vagrant", "vagrant")') -m -s /bin/bash -N vagrant + +# Install vagrant keys +mkdir -pm 700 /home/vagrant/.ssh +curl -Lo /home/vagrant/.ssh/authorized_keys \ + 'https://raw.github.com/mitchellh/vagrant/master/keys/vagrant.pub' +chmod 0600 /home/vagrant/.ssh/authorized_keys +chown -R vagrant:vagrant /home/vagrant/.ssh + +# Customize the message of the day +echo 'Welcome to your Vagrant-built virtual machine.' > /var/run/motd + + diff --git a/wheezy/virtualbox.sh b/wheezy/virtualbox.sh new file mode 100644 index 0000000..e4afe25 --- /dev/null +++ b/wheezy/virtualbox.sh @@ -0,0 +1,13 @@ +if test -f .vbox_version ; then + # The netboot installs the VirtualBox support (old) so we have to remove it + /etc/init.d/virtualbox-ose-guest-utils stop + rmmod vboxguest + aptitude -y purge virtualbox-ose-guest-x11 virtualbox-ose-guest-dkms virtualbox-ose-guest-utils + + # Install the VirtualBox guest additions + VBOX_VERSION=$(cat /home/vagrant/.vbox_version) + VBOX_ISO=VBoxGuestAdditions_$VBOX_VERSION.iso + mount -o loop $VBOX_ISO /mnt + yes|sh /mnt/VBoxLinuxAdditions.run + umount /mnt +fi diff --git a/wheezy/zerodisk.sh b/wheezy/zerodisk.sh new file mode 100644 index 0000000..938075a --- /dev/null +++ b/wheezy/zerodisk.sh @@ -0,0 +1,3 @@ +# Zero out the free space to save space in the final image: +dd if=/dev/zero of=/EMPTY bs=1M +rm -f /EMPTY |