From 42cd675108ab480787ad821625fa6cccf599d2ce Mon Sep 17 00:00:00 2001 From: varac Date: Thu, 13 Mar 2014 20:14:26 +0100 Subject: removed trailing whitespaces in nagios.cfg --- .../site_nagios/files/configs/Debian/nagios.cfg | 84 +++++++++++----------- 1 file changed, 42 insertions(+), 42 deletions(-) (limited to 'puppet') diff --git a/puppet/modules/site_nagios/files/configs/Debian/nagios.cfg b/puppet/modules/site_nagios/files/configs/Debian/nagios.cfg index 9bd3da28..0bc69bc1 100644 --- a/puppet/modules/site_nagios/files/configs/Debian/nagios.cfg +++ b/puppet/modules/site_nagios/files/configs/Debian/nagios.cfg @@ -1,6 +1,6 @@ ############################################################################## # -# NAGIOS.CFG - Sample Main Config File for Nagios +# NAGIOS.CFG - Sample Main Config File for Nagios # # ############################################################################## @@ -8,7 +8,7 @@ # LOG FILE # This is the main log file where service and host events are logged -# for historical purposes. This should be the first option specified +# for historical purposes. This should be the first option specified # in the config file!!! log_file=/var/log/nagios3/nagios.log @@ -36,7 +36,7 @@ cfg_dir=/etc/nagios-plugins/config # OBJECT CACHE FILE # This option determines where object definitions are cached when -# Nagios starts/restarts. The CGIs read object definitions from +# Nagios starts/restarts. The CGIs read object definitions from # this cache file (rather than looking at the object config files # directly) in order to prevent inconsistencies that can occur # when the config files are modified after Nagios starts. @@ -52,7 +52,7 @@ object_cache_file=/var/cache/nagios3/objects.cache # file. You can then start Nagios with the -u option to have it read # object definitions from this precached file, rather than the standard # object configuration files (see the cfg_file and cfg_dir options above). -# Using a precached object file can speed up the time needed to (re)start +# Using a precached object file can speed up the time needed to (re)start # the Nagios process if you've got a large and/or complex configuration. # Read the documentation section on optimizing Nagios to find our more # about how this feature works. @@ -86,7 +86,7 @@ status_file=/var/cache/nagios3/status.dat # STATUS FILE UPDATE INTERVAL # This option determines the frequency (in seconds) that -# Nagios will periodically dump program, host, and +# Nagios will periodically dump program, host, and # service status data. status_update_interval=10 @@ -94,7 +94,7 @@ status_update_interval=10 # NAGIOS USER -# This determines the effective user that Nagios should run as. +# This determines the effective user that Nagios should run as. # You can either supply a username or a UID. nagios_user=nagios @@ -102,7 +102,7 @@ nagios_user=nagios # NAGIOS GROUP -# This determines the effective group that Nagios should run as. +# This determines the effective group that Nagios should run as. # You can either supply a group name or a GID. nagios_group=nagios @@ -128,7 +128,7 @@ check_external_commands=1 # Nagios to check for external commands every minute. If you specify a # number followed by an "s" (i.e. 15s), this will be interpreted to mean # actual seconds rather than a multiple of the interval_length variable. -# Note: In addition to reading the external command file at regularly +# Note: In addition to reading the external command file at regularly # scheduled intervals, Nagios will also check for external commands after # event handlers are executed. # NOTE: Setting this value to -1 causes Nagios to check the external @@ -143,7 +143,7 @@ command_check_interval=-1 # This is the file that Nagios checks for external command requests. # It is also where the command CGI will write commands that are submitted # by users, so it must be writeable by the user that the web server -# is running as (usually 'nobody'). Permissions should be set at the +# is running as (usually 'nobody'). Permissions should be set at the # directory level instead of on the file, as the file is deleted every # time its contents are processed. # Debian Users: In case you didn't read README.Debian yet, _NOW_ is the @@ -155,9 +155,9 @@ command_file=/var/lib/nagios3/rw/nagios.cmd # EXTERNAL COMMAND BUFFER SLOTS # This settings is used to tweak the number of items or "slots" that -# the Nagios daemon should allocate to the buffer that holds incoming -# external commands before they are processed. As external commands -# are processed by the daemon, they are removed from the buffer. +# the Nagios daemon should allocate to the buffer that holds incoming +# external commands before they are processed. As external commands +# are processed by the daemon, they are removed from the buffer. external_command_buffer_slots=4096 @@ -240,7 +240,7 @@ log_rotation_method=d # LOG ARCHIVE PATH -# This is the directory where archived (rotated) log files should be +# This is the directory where archived (rotated) log files should be # placed (assuming you've chosen to do log rotation). log_archive_path=/var/log/nagios3/archives @@ -403,7 +403,7 @@ max_host_check_spread=30 # MAXIMUM CONCURRENT SERVICE CHECKS -# This option allows you to specify the maximum number of +# This option allows you to specify the maximum number of # service checks that can be run in parallel at any given time. # Specifying a value of 1 for this variable essentially prevents # any service checks from being parallelized. A value of 0 @@ -425,7 +425,7 @@ check_result_reaper_frequency=10 # MAX CHECK RESULT REAPER TIME # This is the max amount of time (in seconds) that a single -# check result reaper event will be allowed to run before +# check result reaper event will be allowed to run before # returning control back to Nagios so it can perform other # duties. @@ -439,7 +439,7 @@ max_check_result_reaper_time=30 # service checks that have not yet been processed. # # Note: Make sure that only one instance of Nagios has access -# to this directory! +# to this directory! check_result_path=/var/lib/nagios3/spool/checkresults @@ -448,7 +448,7 @@ check_result_path=/var/lib/nagios3/spool/checkresults # MAX CHECK RESULT FILE AGE # This option determines the maximum age (in seconds) which check -# result files are considered to be valid. Files older than this +# result files are considered to be valid. Files older than this # threshold will be mercilessly deleted without further processing. max_check_result_file_age=3600 @@ -510,14 +510,14 @@ enable_predictive_service_dependency_checks=1 # SOFT STATE DEPENDENCIES -# This option determines whether or not Nagios will use soft state -# information when checking host and service dependencies. Normally -# Nagios will only use the latest hard host or service state when +# This option determines whether or not Nagios will use soft state +# information when checking host and service dependencies. Normally +# Nagios will only use the latest hard host or service state when # checking dependencies. If you want it to use the latest state (regardless -# of whether its a soft or hard state type), enable this option. +# of whether its a soft or hard state type), enable this option. # Values: -# 0 = Don't use soft state dependencies (default) -# 1 = Use soft state dependencies +# 0 = Don't use soft state dependencies (default) +# 1 = Use soft state dependencies soft_state_dependencies=0 @@ -535,7 +535,7 @@ soft_state_dependencies=0 # This option determines whether or not Nagios will attempt to # automatically reschedule active host and service checks to # "smooth" them out over time. This can help balance the load on -# the monitoring server. +# the monitoring server. # WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE # PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY @@ -598,7 +598,7 @@ perfdata_timeout=5 # This setting determines whether or not Nagios will save state # information for services and hosts before it shuts down. Upon # startup Nagios will reload all saved service and host state -# information before starting to monitor. This is useful for +# information before starting to monitor. This is useful for # maintaining long-term data on state statistics, etc, but will # slow Nagios down a bit when it (re)starts. Since its only # a one-time penalty, I think its well worth the additional @@ -610,7 +610,7 @@ retain_state_information=1 # STATE RETENTION FILE # This is the file that Nagios should use to store host and -# service state information before it shuts down. The state +# service state information before it shuts down. The state # information in this file is also read immediately prior to # starting to monitor the network when Nagios is restarted. # This file is used only if the preserve_state_information @@ -633,7 +633,7 @@ retention_update_interval=60 # USE RETAINED PROGRAM STATE -# This setting determines whether or not Nagios will set +# This setting determines whether or not Nagios will set # program status variables based on the values saved in the # retention file. If you want to use retained program status # information, set this value to 1. If not, set this value @@ -660,7 +660,7 @@ use_retained_scheduling_info=1 # program restarts. # # The values of the masks are bitwise ANDs of values specified -# by the "MODATTR_" definitions found in include/common.h. +# by the "MODATTR_" definitions found in include/common.h. # For example, if you do not want the current enabled/disabled state # of flap detection and event handlers for hosts to be retained, you # would use a value of 24 for the host attribute mask... @@ -711,7 +711,7 @@ use_aggressive_host_checking=0 # SERVICE CHECK EXECUTION OPTION # This determines whether or not Nagios will actively execute -# service checks when it initially starts. If this option is +# service checks when it initially starts. If this option is # disabled, checks are not actively made, but Nagios can still # receive and process passive check results that come in. Unless # you're implementing redundant hosts or have a special need for @@ -733,7 +733,7 @@ accept_passive_service_checks=1 # HOST CHECK EXECUTION OPTION # This determines whether or not Nagios will actively execute -# host checks when it initially starts. If this option is +# host checks when it initially starts. If this option is # disabled, checks are not actively made, but Nagios can still # receive and process passive check results that come in. Unless # you're implementing redundant hosts or have a special need for @@ -790,7 +790,7 @@ process_performance_data=0 # These commands are run after every host and service check is # performed. These commands are executed only if the # enable_performance_data option (above) is set to 1. The command -# argument is the short name of a command definition that you +# argument is the short name of a command definition that you # define in your host configuration file. Read the HTML docs for # more information on performance data. @@ -870,7 +870,7 @@ obsess_over_services=0 # OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND # This is the command that is run for every service check that is # processed by Nagios. This command is executed only if the -# obsess_over_services option (above) is set to 1. The command +# obsess_over_services option (above) is set to 1. The command # argument is the short name of a command definition that you # define in your host configuration file. Read the HTML docs for # more information on implementing distributed monitoring. @@ -894,7 +894,7 @@ obsess_over_hosts=0 # OBSESSIVE COMPULSIVE HOST PROCESSOR COMMAND # This is the command that is run for every host check that is # processed by Nagios. This command is executed only if the -# obsess_over_hosts option (above) is set to 1. The command +# obsess_over_hosts option (above) is set to 1. The command # argument is the short name of a command definition that you # define in your host configuration file. Read the HTML docs for # more information on implementing distributed monitoring. @@ -933,9 +933,9 @@ passive_host_checks_are_soft=0 # ORPHANED HOST/SERVICE CHECK OPTIONS -# These options determine whether or not Nagios will periodically +# These options determine whether or not Nagios will periodically # check for orphaned host service checks. Since service checks are -# not rescheduled until the results of their previous execution +# not rescheduled until the results of their previous execution # instance are processed, there exists a possibility that some # checks may never get rescheduled. A similar situation exists for # host checks, although the exact scheduling details differ a bit @@ -1003,9 +1003,9 @@ additional_freshness_latency=15 # FLAP DETECTION OPTION # This option determines whether or not Nagios will try -# and detect hosts and services that are "flapping". +# and detect hosts and services that are "flapping". # Flapping occurs when a host or service changes between -# states too frequently. When Nagios detects that a +# states too frequently. When Nagios detects that a # host or service is flapping, it will temporarily suppress # notifications for that host/service until it stops # flapping. Flap detection is very experimental, so read @@ -1049,7 +1049,7 @@ date_format=iso8601 # the system configured timezone. # # NOTE: In order to display the correct timezone in the CGIs, you -# will also need to alter the Apache directives for the CGI path +# will also need to alter the Apache directives for the CGI path # to include your timezone. Example: # # @@ -1086,7 +1086,7 @@ enable_embedded_perl=1 # This option determines whether or not Nagios will process Perl plugins # and scripts with the embedded Perl interpreter if the plugins/scripts # do not explicitly indicate whether or not it is okay to do so. Read -# the HTML documentation on the embedded Perl interpreter for more +# the HTML documentation on the embedded Perl interpreter for more # information on how this option works. use_embedded_perl_implicitly=1 @@ -1133,7 +1133,7 @@ use_regexp_matching=0 # "TRUE" REGULAR EXPRESSION MATCHING -# This option controls whether or not "true" regular expression +# This option controls whether or not "true" regular expression # matching takes place in the object config files. This option # only has an effect if regular expression matching is enabled # (see above). If this option is DISABLED, regular expression @@ -1186,7 +1186,7 @@ use_large_installation_tweaks=0 # This option determines whether or not Nagios will make all standard # macros available as environment variables when host/service checks # and system commands (event handlers, notifications, etc.) are -# executed. Enabling this option can cause performance issues in +# executed. Enabling this option can cause performance issues in # large installations, as it will consume a bit more memory and (more # importantly) consume more CPU. # Values: 1 - Enable environment variable macros (default) @@ -1227,7 +1227,7 @@ enable_environment_macros=1 # This option determines how much (if any) debugging information will # be written to the debug file. OR values together to log multiple # types of information. -# Values: +# Values: # -1 = Everything # 0 = Nothing # 1 = Functions -- cgit v1.2.3 From 75d169a2e709c891613cd9ca759469a8b951e580 Mon Sep 17 00:00:00 2001 From: varac Date: Thu, 13 Mar 2014 20:19:07 +0100 Subject: Dont't archive nagios logs (#5324) --- puppet/modules/site_nagios/files/configs/Debian/nagios.cfg | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'puppet') diff --git a/puppet/modules/site_nagios/files/configs/Debian/nagios.cfg b/puppet/modules/site_nagios/files/configs/Debian/nagios.cfg index 0bc69bc1..e46ebf62 100644 --- a/puppet/modules/site_nagios/files/configs/Debian/nagios.cfg +++ b/puppet/modules/site_nagios/files/configs/Debian/nagios.cfg @@ -235,7 +235,7 @@ event_broker_options=-1 # w = Weekly rotation (midnight on Saturday evening) # m = Monthly rotation (midnight last day of month) -log_rotation_method=d +log_rotation_method=n -- cgit v1.2.3 From a7ff480b5946f30445add762839118d878a775de Mon Sep 17 00:00:00 2001 From: varac Date: Thu, 13 Mar 2014 20:32:45 +0100 Subject: Dont't archive nagios logs, use logrotate for it (Feature #5324) --- puppet/modules/site_nagios/manifests/server.pp | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'puppet') diff --git a/puppet/modules/site_nagios/manifests/server.pp b/puppet/modules/site_nagios/manifests/server.pp index 7106c36a..85443917 100644 --- a/puppet/modules/site_nagios/manifests/server.pp +++ b/puppet/modules/site_nagios/manifests/server.pp @@ -46,4 +46,13 @@ class site_nagios::server inherits nagios::base { include site_nagios::server::apache include site_check_mk::server include site_shorewall::monitor + + augeas { + 'logrotate_nagios': + context => '/files/etc/logrotate.d/nagios/rule', + changes => [ 'set file /var/log/nagios3/nagios.log', 'set rotate 7', + 'set schedule daily', 'set compress compress', + 'set missingok missingok', 'set ifempty notifempty', + 'set copytruncate copytruncate' ] + } } -- cgit v1.2.3