From d6b521372243b79105a1513d4559572dfab6db54 Mon Sep 17 00:00:00 2001
From: Micah <micah@leap.se>
Date: Tue, 22 Sep 2015 15:04:33 -0400
Subject: add clamav filtering, with sanesecurity signature updating and
 provider whitelisting (#3625)

Change-Id: I15985ca00ee95bc62855f098a78e364ebbc32616
---
 puppet/modules/clamav/files/01-leap.conf          | 58 +++++++++++++++++++++++
 puppet/modules/clamav/files/clamav-daemon_default |  8 ++++
 puppet/modules/clamav/files/clamav-milter_default | 14 ++++++
 3 files changed, 80 insertions(+)
 create mode 100644 puppet/modules/clamav/files/01-leap.conf
 create mode 100644 puppet/modules/clamav/files/clamav-daemon_default
 create mode 100644 puppet/modules/clamav/files/clamav-milter_default

(limited to 'puppet/modules/clamav/files')

diff --git a/puppet/modules/clamav/files/01-leap.conf b/puppet/modules/clamav/files/01-leap.conf
new file mode 100644
index 00000000..abeeb302
--- /dev/null
+++ b/puppet/modules/clamav/files/01-leap.conf
@@ -0,0 +1,58 @@
+# If running clamd in "LocalSocket" mode (*NOT* in TCP/IP mode), and
+# either "SOcket Cat" (socat) or the "IO::Socket::UNIX" perl module
+# are installed on the system, and you want to report whether clamd
+# is running or not, uncomment the "clamd_socket" variable below (you
+# will be warned if neither socat nor IO::Socket::UNIX are found, but
+# the script will still run).  You will also need to set the correct
+# path to your clamd socket file (if unsure of the path, check the
+# "LocalSocket" setting in your clamd.conf file for socket location).
+clamd_socket="/run/clamav/clamd.ctl"
+
+# If you would like to attempt to restart ClamD if detected not running,
+# uncomment the next 2 lines.  Confirm the path to the "clamd_lock" file
+# (usually can be found in the clamd init script) and also enter the clamd
+# start command for your particular distro for the "start_clamd" variable
+# (the sample start command shown below should work for most linux distros).
+# NOTE: these 2 variables are dependant on the "clamd_socket" variable
+# shown above - if not enabled, then the following 2 variables will be
+# ignored, whether enabled or not.
+clamd_lock="/run/clamav/clamd.pid"
+start_clamd="service clamav-daemon start"
+
+ss_dbs="
+   junk.ndb
+   phish.ndb
+   rogue.hdb
+   sanesecurity.ftm
+   scam.ndb
+   sigwhitelist.ign2
+   spamattach.hdb
+   spamimg.hdb
+   winnow.attachments.hdb
+   winnow_bad_cw.hdb
+   winnow_extended_malware.hdb
+   winnow_malware.hdb
+   winnow_malware_links.ndb
+   malwarehash.hsb
+   doppelstern.hdb
+   bofhland_cracked_URL.ndb
+   bofhland_malware_attach.hdb
+   bofhland_malware_URL.ndb
+   bofhland_phishing_URL.ndb
+   crdfam.clamav.hdb
+   phishtank.ndb
+   porcupine.ndb
+   spear.ndb
+   spearl.ndb
+"
+
+# ========================
+# SecuriteInfo Database(s)
+# ========================
+# Add or remove database file names between quote marks as needed.  To
+# disable any SecuriteInfo database downloads, remove the appropriate
+# lines below.  To disable all SecuriteInfo database file downloads,
+# comment all of the following lines.
+si_dbs=""
+
+mbl_dbs=""
\ No newline at end of file
diff --git a/puppet/modules/clamav/files/clamav-daemon_default b/puppet/modules/clamav/files/clamav-daemon_default
new file mode 100644
index 00000000..b4cd6a4f
--- /dev/null
+++ b/puppet/modules/clamav/files/clamav-daemon_default
@@ -0,0 +1,8 @@
+# This is a file designed only t0 set special environment variables
+# eg TMP or TMPDIR.  It is sourced from a shell script, so anything
+# put in here must be in variable=value format, suitable for sourcing
+# from a shell script.
+# Examples:
+# export TMPDIR=/dev/shm
+export TMP=/var/tmp
+export TMPDIR=/var/tmp
diff --git a/puppet/modules/clamav/files/clamav-milter_default b/puppet/modules/clamav/files/clamav-milter_default
new file mode 100644
index 00000000..5e33e822
--- /dev/null
+++ b/puppet/modules/clamav/files/clamav-milter_default
@@ -0,0 +1,14 @@
+#
+# clamav-milter init options
+#
+
+## SOCKET_RWGROUP
+# by default, the socket created by the milter has permissions
+# clamav:clamav:755. SOCKET_RWGROUP changes the group and changes the
+# permissions to 775 to give read-write access to that group.
+#
+# If you are using postfix to speak to the milter, you have to give permission
+# to the postfix group to write
+#
+SOCKET_RWGROUP=postfix
+export TMPDIR=/var/tmp
-- 
cgit v1.2.3