diff options
Diffstat (limited to 'puppet/modules/apt/templates/Debian')
16 files changed, 400 insertions, 0 deletions
diff --git a/puppet/modules/apt/templates/Debian/apticron_jessie.erb b/puppet/modules/apt/templates/Debian/apticron_jessie.erb new file mode 120000 index 00000000..a9a3a6fd --- /dev/null +++ b/puppet/modules/apt/templates/Debian/apticron_jessie.erb @@ -0,0 +1 @@ +apticron_wheezy.erb
\ No newline at end of file diff --git a/puppet/modules/apt/templates/Debian/apticron_lenny.erb b/puppet/modules/apt/templates/Debian/apticron_lenny.erb new file mode 100644 index 00000000..86b09977 --- /dev/null +++ b/puppet/modules/apt/templates/Debian/apticron_lenny.erb @@ -0,0 +1,50 @@ +# apticron.conf +# +# set EMAIL to a list of addresses which will be notified of impending updates +# +EMAIL="<%= scope.lookupvar('apt::apticron::email') %>" + +# +# Set DIFF_ONLY to "1" to only output the difference of the current run +# compared to the last run (ie. only new upgrades since the last run). If there +# are no differences, no output/email will be generated. By default, apticron +# will output everything that needs to be upgraded. +# +DIFF_ONLY="<%= scope.lookupvar('apt::apticron::diff_only') %>" + +# +# Set LISTCHANGES_PROFILE if you would like apticron to invoke apt-listchanges +# with the --profile option. You should add a corresponding profile to +# /etc/apt/listchanges.conf +# +LISTCHANGES_PROFILE="<%= scope.lookupvar('apt::apticron::listchanges_profile') %>" + +# +# Set SYSTEM if you would like apticron to use something other than the output +# of "hostname -f" for the system name in the mails it generates +# +# SYSTEM="foobar.example.com" +<% unless (v=scope.lookupvar('apt::apticron::system')).to_s == "false" -%> +SYSTEM="<%= v %>" +<% end -%> + +# +# Set IPADDRESSNUM if you would like to configure the maximal number of IP +# addresses apticron displays. The default is to display 1 address of each +# family type (inet, inet6), if available. +# +# IPADDRESSNUM="1" +<% unless (v=scope.lookupvar('apt::apticron::ipaddressnum')).to_s == "false" -%> +IPADDRESSNUM="<%= v %>" +<% end -%> + +# +# Set IPADDRESSES to a whitespace seperated list of reachable addresses for +# this system. By default, apticron will try to work these out using the +# "ip" command +# +# IPADDRESSES="192.0.2.1 2001:db8:1:2:3::1" +<% unless (v=scope.lookupvar('apt::apticron::ipaddresses')).to_s == "false" -%> +IPADDRESSES="<%= v %>" +<% end -%> + diff --git a/puppet/modules/apt/templates/Debian/apticron_sid.erb b/puppet/modules/apt/templates/Debian/apticron_sid.erb new file mode 120000 index 00000000..a9a3a6fd --- /dev/null +++ b/puppet/modules/apt/templates/Debian/apticron_sid.erb @@ -0,0 +1 @@ +apticron_wheezy.erb
\ No newline at end of file diff --git a/puppet/modules/apt/templates/Debian/apticron_squeeze.erb b/puppet/modules/apt/templates/Debian/apticron_squeeze.erb new file mode 100644 index 00000000..05b7c9b8 --- /dev/null +++ b/puppet/modules/apt/templates/Debian/apticron_squeeze.erb @@ -0,0 +1,82 @@ +# apticron.conf +# +# set EMAIL to a space separated list of addresses which will be notified of +# impending updates +# +EMAIL="<%= scope.lookupvar('apt::apticron::email') %>" + + +# +# Set DIFF_ONLY to "1" to only output the difference of the current run +# compared to the last run (ie. only new upgrades since the last run). If there +# are no differences, no output/email will be generated. By default, apticron +# will output everything that needs to be upgraded. +# +DIFF_ONLY="<%= scope.lookupvar('apt::apticron::diff_only') %>" + +# +# Set LISTCHANGES_PROFILE if you would like apticron to invoke apt-listchanges +# with the --profile option. You should add a corresponding profile to +# /etc/apt/listchanges.conf +# +LISTCHANGES_PROFILE="<%= scope.lookupvar('apt::apticron::listchanges_profile') %>" + +# +# Set SYSTEM if you would like apticron to use something other than the output +# of "hostname -f" for the system name in the mails it generates +# +# SYSTEM="foobar.example.com" +<% unless (v=scope.lookupvar('apt::apticron::system')).to_s == "false" -%> +SYSTEM="<%= v %>" +<% end -%> + + +# +# Set IPADDRESSNUM if you would like to configure the maximal number of IP +# addresses apticron displays. The default is to display 1 address of each +# family type (inet, inet6), if available. +# +# IPADDRESSNUM="1" +<% unless (v=scope.lookupvar('apt::apticron::ipaddressnum')).to_s == "false" -%> +IPADDRESSNUM="<%= v %>" +<% end -%> + + +# +# Set IPADDRESSES to a whitespace separated list of reachable addresses for +# this system. By default, apticron will try to work these out using the +# "ip" command +# +# IPADDRESSES="192.0.2.1 2001:db8:1:2:3::1" +<% unless (v=scope.lookupvar('apt::apticron::ipaddresses')).to_s == "false" -%> +IPADDRESSES="<%= v %>" +<% end -%> + + +# +# Set NOTIFY_HOLDS="0" if you don't want to be notified about new versions of +# packages on hold in your system. The default behavior is downloading and +# listing them as any other package. +# +# NOTIFY_HOLDS="0" +NOTIFY_HOLDS="<%= scope.lookupvar('apt::apticron::notifyholds') %>" + +# +# Set NOTIFY_NEW="0" if you don't want to be notified about packages which +# are not installed in your system. Yes, it's possible! There are some issues +# related to systems which have mixed stable/unstable sources. In these cases +# apt-get will consider for example that packages with "Priority: +# required"/"Essential: yes" in unstable but not in stable should be installed, +# so they will be listed in dist-upgrade output. Please take a look at +# http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=531002#44 +# +# NOTIFY_NEW="0" +NOTIFY_NEW="<%= scope.lookupvar('apt::apticron::notifynew') %>" + +# +# Set CUSTOM_SUBJECT if you want to replace the default subject used in +# the notification e-mails. This may help filtering/sorting client-side e-mail. +# +# CUSTOM_SUBJECT="" +CUSTOM_SUBJECT="<%= scope.lookupvar('apt::apticron::customsubject') %>" + diff --git a/puppet/modules/apt/templates/Debian/apticron_wheezy.erb b/puppet/modules/apt/templates/Debian/apticron_wheezy.erb new file mode 100644 index 00000000..655854e6 --- /dev/null +++ b/puppet/modules/apt/templates/Debian/apticron_wheezy.erb @@ -0,0 +1,80 @@ +# apticron.conf +# +# set EMAIL to a space separated list of addresses which will be notified of +# impending updates +# +EMAIL="<%= scope.lookupvar('apt::apticron::email') %>" + +# +# Set DIFF_ONLY to "1" to only output the difference of the current run +# compared to the last run (ie. only new upgrades since the last run). If there +# are no differences, no output/email will be generated. By default, apticron +# will output everything that needs to be upgraded. +# +DIFF_ONLY="<%= scope.lookupvar('apt::apticron::diff_only') %>" + +# +# Set LISTCHANGES_PROFILE if you would like apticron to invoke apt-listchanges +# with the --profile option. You should add a corresponding profile to +# /etc/apt/listchanges.conf +# +LISTCHANGES_PROFILE="<%= scope.lookupvar('apt::apticron::listchanges_profile') %>" + +# +# Set SYSTEM if you would like apticron to use something other than the output +# of "hostname -f" for the system name in the mails it generates +# +# SYSTEM="foobar.example.com" +<% unless (v=scope.lookupvar('apt::apticron::system')).to_s == "false" -%> +SYSTEM="<%= v %>" +<% end -%> + +# +# Set IPADDRESSNUM if you would like to configure the maximal number of IP +# addresses apticron displays. The default is to display 1 address of each +# family type (inet, inet6), if available. +# +# IPADDRESSNUM="1" +<% unless (v=scope.lookupvar('apt::apticron::ipaddressnum')).to_s == "false" -%> +IPADDRESSNUM="<%= v %>" +<% end -%> + +# +# Set IPADDRESSES to a whitespace separated list of reachable addresses for +# this system. By default, apticron will try to work these out using the +# "ip" command +# +# IPADDRESSES="192.0.2.1 2001:db8:1:2:3::1" +<% unless (v=scope.lookupvar('apt::apticron::ipaddresses')).to_s == "false" -%> +IPADDRESSES=<%= v %>" +<% end -%> + +# +# Set NOTIFY_HOLDS="0" if you don't want to be notified about new versions of +# packages on hold in your system. The default behavior is downloading and +# listing them as any other package. +# +# NOTIFY_HOLDS="0" +NOTIFY_HOLDS="<%= scope.lookupvar('apt::apticron::notifyholds') %>" + +# +# Set NOTIFY_NEW="0" if you don't want to be notified about packages which +# are not installed in your system. Yes, it's possible! There are some issues +# related to systems which have mixed stable/unstable sources. In these cases +# apt-get will consider for example that packages with "Priority: +# required"/"Essential: yes" in unstable but not in stable should be installed, +# so they will be listed in dist-upgrade output. Please take a look at +# http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=531002#44 +# +# NOTIFY_NEW="0" +NOTIFY_NEW="<%= scope.lookupvar('apt::apticron::notifynew') %>" + + +# +# Set CUSTOM_SUBJECT if you want to replace the default subject used in +# the notification e-mails. This may help filtering/sorting client-side e-mail. +# If you want to use internal vars please use single quotes here. Ex: +# ='[apticron] : package update(s)' +# +# CUSTOM_SUBJECT="" +CUSTOM_SUBJECT="<%= scope.lookupvar('apt::apticron::customsubject') %>" diff --git a/puppet/modules/apt/templates/Debian/listchanges_jessie.erb b/puppet/modules/apt/templates/Debian/listchanges_jessie.erb new file mode 120000 index 00000000..74ab496d --- /dev/null +++ b/puppet/modules/apt/templates/Debian/listchanges_jessie.erb @@ -0,0 +1 @@ +listchanges_lenny.erb
\ No newline at end of file diff --git a/puppet/modules/apt/templates/Debian/listchanges_lenny.erb b/puppet/modules/apt/templates/Debian/listchanges_lenny.erb new file mode 100644 index 00000000..1025dd0e --- /dev/null +++ b/puppet/modules/apt/templates/Debian/listchanges_lenny.erb @@ -0,0 +1,7 @@ +[apt] +frontend=<%= scope.lookupvar('apt::listchanges::frontend') %> +email_address=<%= scope.lookupvar('apt::listchanges::email') %> +confirm=<%= scope.lookupvar('apt::listchanges::confirm') %> +save_seen=<%= scope.lookupvar('apt::listchanges::saveseen') %> +which=<%= scope.lookupvar('apt::listchanges::which') %> + diff --git a/puppet/modules/apt/templates/Debian/listchanges_sid.erb b/puppet/modules/apt/templates/Debian/listchanges_sid.erb new file mode 120000 index 00000000..74ab496d --- /dev/null +++ b/puppet/modules/apt/templates/Debian/listchanges_sid.erb @@ -0,0 +1 @@ +listchanges_lenny.erb
\ No newline at end of file diff --git a/puppet/modules/apt/templates/Debian/listchanges_squeeze.erb b/puppet/modules/apt/templates/Debian/listchanges_squeeze.erb new file mode 120000 index 00000000..74ab496d --- /dev/null +++ b/puppet/modules/apt/templates/Debian/listchanges_squeeze.erb @@ -0,0 +1 @@ +listchanges_lenny.erb
\ No newline at end of file diff --git a/puppet/modules/apt/templates/Debian/listchanges_wheezy.erb b/puppet/modules/apt/templates/Debian/listchanges_wheezy.erb new file mode 120000 index 00000000..74ab496d --- /dev/null +++ b/puppet/modules/apt/templates/Debian/listchanges_wheezy.erb @@ -0,0 +1 @@ +listchanges_lenny.erb
\ No newline at end of file diff --git a/puppet/modules/apt/templates/Debian/preferences_jessie.erb b/puppet/modules/apt/templates/Debian/preferences_jessie.erb new file mode 100644 index 00000000..0888abe5 --- /dev/null +++ b/puppet/modules/apt/templates/Debian/preferences_jessie.erb @@ -0,0 +1,14 @@ +Explanation: Debian <%= codename=scope.lookupvar('::debian_codename') %> +Package: * +Pin: release o=Debian,n=<%= codename %> +Pin-Priority: 990 + +Explanation: Debian sid +Package: * +Pin: release o=Debian,n=sid +Pin-Priority: 1 + +Explanation: Debian fallback +Package: * +Pin: release o=Debian +Pin-Priority: -10 diff --git a/puppet/modules/apt/templates/Debian/preferences_lenny.erb b/puppet/modules/apt/templates/Debian/preferences_lenny.erb new file mode 100644 index 00000000..65001687 --- /dev/null +++ b/puppet/modules/apt/templates/Debian/preferences_lenny.erb @@ -0,0 +1,25 @@ +Explanation: Debian <%= codename=scope.lookupvar('::debian_codename') %> +Package: * +Pin: release o=Debian,a=<%= scope.lookupvar('::debian_release') %>,v=5* +Pin-Priority: 990 + +Explanation: Debian backports +Package: * +Pin: origin backports.debian.org +Pin-Priority: 200 + +Explanation: Debian <%= next_release=scope.lookupvar('::debian_nextrelease') %> +Package: * +Pin: release o=Debian,a=<%= next_release %> +Pin-Priority: 2 + +Explanation: Debian sid +Package: * +Pin: release o=Debian,a=unstable +Pin-Priority: 1 + +Explanation: Debian fallback +Package: * +Pin: release o=Debian +Pin-Priority: -10 + diff --git a/puppet/modules/apt/templates/Debian/preferences_sid.erb b/puppet/modules/apt/templates/Debian/preferences_sid.erb new file mode 100644 index 00000000..eb185543 --- /dev/null +++ b/puppet/modules/apt/templates/Debian/preferences_sid.erb @@ -0,0 +1,10 @@ +Explanation: Debian sid +Package: * +Pin: release o=Debian,n=sid +Pin-Priority: 990 + +Explanation: Debian fallback +Package: * +Pin: release o=Debian +Pin-Priority: -10 + diff --git a/puppet/modules/apt/templates/Debian/preferences_squeeze.erb b/puppet/modules/apt/templates/Debian/preferences_squeeze.erb new file mode 100644 index 00000000..885edc73 --- /dev/null +++ b/puppet/modules/apt/templates/Debian/preferences_squeeze.erb @@ -0,0 +1,30 @@ +Explanation: Debian <%= codename=scope.lookupvar('::debian_codename') %> +Package: * +Pin: release o=Debian,n=<%= codename %> +Pin-Priority: 990 + +Explanation: Debian <%= codename %>-updates +Package: * +Pin: release o=Debian,n=<%= codename %>-updates +Pin-Priority: 990 + +Explanation: Debian <%= codename %>-lts +Package: * +Pin: release o=Debian,n=<%= codename %>-lts +Pin-Priority: 990 + +Explanation: Debian <%= next_codename=scope.lookupvar('::debian_nextcodename') %> +Package: * +Pin: release o=Debian,n=<%= next_codename %> +Pin-Priority: 2 + +Explanation: Debian sid +Package: * +Pin: release o=Debian,n=sid +Pin-Priority: 1 + +Explanation: Debian fallback +Package: * +Pin: release o=Debian +Pin-Priority: -10 + diff --git a/puppet/modules/apt/templates/Debian/preferences_wheezy.erb b/puppet/modules/apt/templates/Debian/preferences_wheezy.erb new file mode 100644 index 00000000..106108d5 --- /dev/null +++ b/puppet/modules/apt/templates/Debian/preferences_wheezy.erb @@ -0,0 +1,20 @@ +Explanation: Debian <%= codename=scope.lookupvar('::debian_codename') %> +Package: * +Pin: release o=Debian,n=<%= codename %> +Pin-Priority: 990 + +Explanation: Debian <%= codename %>-updates +Package: * +Pin: release o=Debian,n=<%= codename %>-updates +Pin-Priority: 990 + +Explanation: Debian sid +Package: * +Pin: release o=Debian,n=sid +Pin-Priority: 1 + +Explanation: Debian fallback +Package: * +Pin: release o=Debian +Pin-Priority: -10 + diff --git a/puppet/modules/apt/templates/Debian/sources.list.erb b/puppet/modules/apt/templates/Debian/sources.list.erb new file mode 100644 index 00000000..44eea538 --- /dev/null +++ b/puppet/modules/apt/templates/Debian/sources.list.erb @@ -0,0 +1,76 @@ +# This file is managed by puppet +# all local modifications will be overwritten + +### Debian current: <%= codename=scope.lookupvar('::debian_codename') %> + +# basic +deb <%= debian_url=scope.lookupvar('apt::debian_url') %> <%= codename %> <%= lrepos=scope.lookupvar('apt::real_repos') %> +<% if include_src=scope.lookupvar('apt::include_src') -%> +deb-src <%= debian_url %> <%= codename %> <%= lrepos %> +<% end -%> + +# security +<% if ((release=scope.lookupvar('::debian_release')) == "stable" || release == "oldstable") -%> +deb <%= security_url=scope.lookupvar('apt::security_url') %> <%= codename %>/updates <%= lrepos %> +<% if include_src -%> +deb-src <%= security_url %> <%= codename %>/updates <%= lrepos %> +<% end -%> +<% else -%> +# There is no security support for <%= release %> +<% end -%> + +<% if use_volatile=scope.lookupvar('apt::use_volatile') -%> +# volatile +<% if (release == "testing" || release == "unstable" || release == "experimental") -%> +# There is no volatile archive for <%= release %> +<% else -%> +deb <%= debian_url %> <%= codename %>-updates <%= lrepos %> +<% if include_src -%> +deb-src <%= debian_url %> <%= codename %>-updates <%= lrepos %> +<% end + end + end -%> + +<% if use_lts=scope.lookupvar('apt::use_lts') -%> +# LTS +<% if release_lts=scope.lookupvar('::debian_lts') == "false" -%> +# There is no LTS archive for <%= release %> +<% else -%> +deb <%= debian_url %> <%= codename %>-lts <%= lrepos %> +<% if include_src -%> +deb-src <%= debian_url %> <%= codename %>-lts <%= lrepos %> +<% end -%> +<% end -%> +<% end -%> + +<% if next_release=scope.lookupvar('apt::use_next_release') -%> +### Debian next: <%= next_release=scope.lookupvar('::debian_nextrelease') ; next_codename=scope.lookupvar('::debian_nextcodename') %> + +# basic +deb <%= debian_url %> <%= next_codename %> <%= lrepos %> +<% if include_src -%> +deb-src <%= debian_url %> <%= next_codename %> <%= lrepos %> +<% end -%> + +# security +<% if (next_release == "unstable" || next_release == "experimental") -%> +# There is no security support for <%= next_release %> +<% else -%> +deb <%= security_url %> <%= next_codename %>/updates <%= lrepos %> +<% if include_src then -%> +deb-src <%= security_url %> <%= next_codename %>/updates <%= lrepos %> +<% end + end -%> + +<% if use_volatile -%> +# volatile +<% if (next_release == "testing" || next_release == "unstable" || next_release == "experimental") -%> +# There is no volatile archive for <%= next_release %> +<% else -%> +deb <%= debian_url %> <%= next_codename %>-updates <%= lrepos %> +<% if include_src -%> +deb-src <%= debian_url %> <%= next_codename %>-updates <%= lrepos %> +<% end + end + end + end -%> |