diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 219 |
1 files changed, 219 insertions, 0 deletions
@@ -0,0 +1,219 @@ +modules/shorewall/manifests/init.pp - manage firewalling with shorewall 3.x + +Puppet Module for Shorewall +--------------------------- +This module manages the configuration of Shorewall (http://www.shorewall.net/) + +Requirements +------------ + +This module requires the augeas module, you can find that here: +https://labs.riseup.net/code/projects/shared-augeas + +Copyright +--------- + +Copyright (C) 2007 David Schmitt <david@schmitt.edv-bus.at> +adapted by immerda project group - admin+puppet(at)immerda.ch +adapted by Puzzle ITC - haerry+puppet(at)puzzle.ch +Copyright (c) 2009 Riseup Networks - micah(shift+2)riseup.net +Copyright (c) 2010 intrigeri - intrigeri(at)boum.org +See LICENSE for the full license granted to you. + +Based on the work of ADNET Ghislain <gadnet@aqueos.com> from AQUEOS +at https://reductivelabs.com/trac/puppet/wiki/AqueosShorewall + +Merged from: +- git://git.puppet.immerda.ch/module-shorewall.git +- git://labs.riseup.net/module_shorewall + +Todo +---- +- check if shorewall compiles without errors, otherwise fail ! + +Configuration +------------- + +If you need to install a specific version of shorewall other than +the default one that would be installed by 'ensure => present', then +you can set the following variable and that specific version will be +installed instead: + + $shorewall_ensure_version = "4.0.15-1" + +The main shorewall.conf is not managed by this module, rather the default one +that your operatingsystem provides is used, and any modifications you wish to do +to it should be configured with augeas, for example, to set IP_FORWARDING=Yes in +shorewall.conf, simply do this: + + augeas { 'enable_ip_forwarding': + changes => 'set /files/etc/shorewall/shorewall.conf/IP_FORWARDING Yes', + lens => 'Shellvars.lns', + incl => '/etc/shorewall/shorewall.conf', + notify => Service[shorewall]; + } + +NOTE: this requires the augeas ruby bindings newer than 0.7.3. + +If you need to, you can provide an entire shorewall.conf by passing its +source to the main class: + +class{'shorewall': + conf_source => "puppet:///modules/site_shorewall/${::fqdn}/shorewall.conf.${::operatingsystem}", +} + +NOTE: if you distribute a file, you cannot also use augeas, puppet and augeas +will fight forever. Secondly, you will *need* to make sure that if you are shipping your own +shorewall.conf that you have the following value set in your shorewall.conf otherwise this +module will not work: + + CONFIG_PATH="/etc/shorewall/puppet:/etc/shorewall:/usr/share/shorewall" + +Documentation +------------- + +see also: http://reductivelabs.com/trac/puppet/wiki/Recipes/AqueosShorewall + +Torify +------ + +The shorewall::rules::torify define can be used to force some outgoing +TCP traffic through the Tor transparent proxy. The corresponding +non-TCP traffic is rejected accordingly. + +Beware! This define only is part of a torified setup. DNS requests and +IPv6, amongst others, might leak network activity you would prefer not +to. You really need to read proper documentation about these matters +before using this feature e.g.: + + https://www.torproject.org/download/download.html.en#warning + +The Tor transparent proxy location defaults to 127.0.0.1:9040 and can +be configured by setting the $tor_transparent_proxy_host and +$tor_transparent_proxy_port variables before including the main +shorewall class. + +Example usage follows. + +Torify any outgoing TCP traffic originating from user bob or alice and +aimed at 6.6.6.6 or 7.7.7.7: + + shorewall::rules::torify { + 'torify-some-bits': + users => [ 'bob', 'alice' ], + destinations => [ '6.6.6.6', '7.7.7.7' ]; + } + +Torify any outgoing TCP traffic to 8.8.8.8: + + shorewall::rules::torify { + 'torify-to-this-host': + destinations => [ '8.8.8.8' ]; + } + +When no destination nor user is provided any outgoing TCP traffic (see +restrictions bellow) is torified. In that case the user running the +Tor client ($tor_user) is whitelisted; this variable defaults to +"debian-tor" on Debian systems and to "tor" on others. if this does +not suit your configuration you need to set the $tor_user variable +before including the main shorewall class. + +When no destination is provided traffic directed to RFC1918 addresses +is by default allowed and (obviously) not torified. This behaviour can +be changed by setting the allow_rfc1918 parameter to false. + +Torify any outgoing TCP traffic but connections to RFC1918 addresses: + + shorewall::rules::torify { + 'torify-everything-but-lan': + } + +Torify any outgoing TCP traffic: + + shorewall::rules::torify { + 'torify-everything: + allow_rfc1918 => false; + } + +In some cases (e.g. when providing no specific destination nor user +and denying access to RFC1918 addresses) UDP DNS requests may be +rejected. This is intentional: it does not make sense leaking -via DNS +requests- network activity that would otherwise be torified. In that +case you probably want to read proper documentation about such +matters, enable the Tor DNS resolver and redirect DNS requests through +it. + +Example +------- + +Example from node.pp: + +node xy { + class{'config::site_shorewall': + startup => "0" # create shorewall ruleset but don't startup + } + shorewall::rule { + 'incoming-ssh': source => 'all', destination => '$FW', action => 'SSH(ACCEPT)', order => 200; + 'incoming-puppetmaster': source => 'all', destination => '$FW', action => 'Puppetmaster(ACCEPT)', order => 300; + 'incoming-imap': source => 'all', destination => '$FW', action => 'IMAP(ACCEPT)', order => 300; + 'incoming-smtp': source => 'all', destination => '$FW', action => 'SMTP(ACCEPT)', order => 300; + } +} + + +class config::site_shorewall($startup = '1') { + class{'shorewall': + startup => $startup + } + + # If you want logging: + #shorewall::params { + # 'LOG': value => 'debug'; + #} + + shorewall::zone {'net': + type => 'ipv4'; + } + + shorewall::rule_section { 'NEW': + order => 100; + } + + shorewall::interface { 'eth0': + zone => 'net', + rfc1918 => true, + options => 'tcpflags,blacklist,nosmurfs'; + } + + shorewall::policy { + 'fw-to-fw': + sourcezone => '$FW', + destinationzone => '$FW', + policy => 'ACCEPT', + order => 100; + 'fw-to-net': + sourcezone => '$FW', + destinationzone => 'net', + policy => 'ACCEPT', + shloglevel => '$LOG', + order => 110; + 'net-to-fw': + sourcezone => 'net', + destinationzone => '$FW', + policy => 'DROP', + shloglevel => '$LOG', + order => 120; + } + + + # default Rules : ICMP + shorewall::rule { + 'allicmp-to-host': + source => 'all', + destination => '$FW', + order => 200, + action => 'AllowICMPs/(ACCEPT)'; + } +} + + |