Merge branch 'develop'

3 files changed, 262 insertions, 0 deletions

diff --git a/puppet/modules/nagios b/puppet/modules/nagios
deleted file mode 160000
-Subproject 68dab01a85996e14efcccf856b623a2caf25782
diff --git a/puppet/modules/nagios/files/nsca/nsca.cfg b/puppet/modules/nagios/files/nsca/nsca.cfg
new file mode 100644
index 00000000..0b019ea1
--- /dev/null
+++ b/puppet/modules/nagios/files/nsca/nsca.cfg
@@ -0,0 +1,197 @@
+# This file is managed by Puppet.
+#
+####################################################
+# Sample NSCA Daemon Config File 
+# Written by: Ethan Galstad (nagios@nagios.org)
+# 
+# Last Modified: 04-03-2006
+####################################################
+
+
+# PID FILE
+# The name of the file in which the NSCA daemon should write it's process ID
+# number.  The file is only written if the NSCA daemon is started by the root
+# user as a single- or multi-process daemon.
+
+pid_file=/var/run/nsca.pid
+
+
+
+# PORT NUMBER
+# Port number we should wait for connections on.
+# This must be a non-priveledged port (i.e. > 1024).
+
+server_port=5667
+
+
+
+# SERVER ADDRESS
+# Address that NSCA has to bind to in case there are
+# more as one interface and we do not want NSCA to bind
+# (thus listen) on all interfaces.
+
+#server_address=192.168.1.1
+
+
+
+# NSCA USER
+# This determines the effective user that the NSCA daemon should run as.  
+# You can either supply a username or a UID.
+# 
+# NOTE: This option is ignored if NSCA is running under either inetd or xinetd
+
+nsca_user=nagios
+
+
+
+# NSCA GROUP
+# This determines the effective group that the NSCA daemon should run as.  
+# You can either supply a group name or a GID.
+# 
+# NOTE: This option is ignored if NSCA is running under either inetd or xinetd
+
+nsca_group=nogroup
+
+
+
+# NSCA CHROOT
+# If specified, determines a directory into which the nsca daemon
+# will perform a chroot(2) operation before dropping its privileges.
+# for the security conscious this can add a layer of protection in
+# the event that the nagios daemon is compromised.  
+# 
+# NOTE: if you specify this option, the command file will be opened
+#       relative to this directory.
+
+#nsca_chroot=/var/run/nagios/rw
+
+
+
+# DEBUGGING OPTION
+# This option determines whether or not debugging
+# messages are logged to the syslog facility. 
+# Values: 0 = debugging off, 1 = debugging on
+
+debug=0
+
+
+
+# COMMAND FILE
+# This is the location of the Nagios command file that the daemon
+# should write all service check results that it receives.
+# Note to debian users: nagios 1.x and nagios 2.x have
+# different default locations for this file.  this is the
+# default location for nagios 1.x:
+#command_file=/var/run/nagios/nagios.cmd
+# and this is the default location for nagios2:
+#command_file=/var/lib/nagios2/rw/nagios.cmd
+# and this is the default location for nagios3:
+command_file=/var/lib/nagios3/rw/nagios.cmd
+
+# ALTERNATE DUMP FILE
+# This is used to specify an alternate file the daemon should
+# write service check results to in the event the command file
+# does not exist.  It is important to note that the command file
+# is implemented as a named pipe and only exists when Nagios is
+# running.  You may want to modify the startup script for Nagios
+# to dump the contents of this file into the command file after
+# it starts Nagios.  Or you may simply choose to ignore any
+# check results received while Nagios was not running...
+
+alternate_dump_file=/var/run/nagios/nsca.dump
+
+
+# AGGREGATED WRITES OPTION
+# This option determines whether or not the nsca daemon will
+# aggregate writes to the external command file for client
+# connections that contain multiple check results.  If you
+# are queueing service check results on remote hosts and
+# sending them to the nsca daemon in bulk, you will probably
+# want to enable bulk writes, as this will be a bit more
+# efficient.
+# Values: 0 = do not aggregate writes, 1 = aggregate writes
+
+aggregate_writes=0
+
+
+
+# APPEND TO FILE OPTION
+# This option determines whether or not the nsca daemon will
+# will open the external command file for writing or appending.
+# This option should almost *always* be set to 0!
+# Values: 0 = open file for writing, 1 = open file for appending
+
+append_to_file=0
+
+
+
+# MAX PACKET AGE OPTION
+# This option is used by the nsca daemon to determine when client
+# data is too old to be valid.  Keeping this value as small as
+# possible is recommended, as it helps prevent the possibility of
+# "replay" attacks.  This value needs to be at least as long as
+# the time it takes your clients to send their data to the server.
+# Values are in seconds.  The max packet age cannot exceed 15
+# minutes (900 seconds).  If this variable is set to zero (0), no
+# packets will be rejected based on their age.
+
+max_packet_age=30
+
+
+
+# DECRYPTION PASSWORD
+# This is the password/passphrase that should be used to descrypt the
+# incoming packets.  Note that all clients must encrypt the packets
+# they send using the same password!
+# IMPORTANT: You don't want all the users on this system to be able
+# to read the password you specify here, so make sure to set
+# restrictive permissions on this config file!
+
+#password=
+
+
+
+# DECRYPTION METHOD
+# This option determines the method by which the nsca daemon will
+# decrypt the packets it receives from the clients.  The decryption
+# method you choose will be a balance between security and performance,
+# as strong encryption methods consume more processor resources.
+# You should evaluate your security needs when choosing a decryption
+# method.
+#
+# Note: The decryption method you specify here must match the
+#       encryption method the nsca clients use (as specified in
+#       the send_nsca.cfg file)!!
+# Values:
+#
+# 	0 = None	(Do NOT use this option)
+#       1 = Simple XOR  (No security, just obfuscation, but very fast)
+#
+#       2 = DES
+#       3 = 3DES (Triple DES)
+#	4 = CAST-128
+#	5 = CAST-256
+#	6 = xTEA
+#	7 = 3WAY
+#	8 = BLOWFISH
+#	9 = TWOFISH
+#	10 = LOKI97
+#	11 = RC2
+#	12 = ARCFOUR
+#
+#	14 = RIJNDAEL-128
+#	15 = RIJNDAEL-192
+#	16 = RIJNDAEL-256
+#
+#	19 = WAKE
+#	20 = SERPENT
+#
+#	22 = ENIGMA (Unix crypt)
+#	23 = GOST
+#	24 = SAFER64
+#	25 = SAFER128
+#	26 = SAFER+
+#
+
+decryption_method=1
+
diff --git a/puppet/modules/nagios/files/nsca/send_nsca.cfg b/puppet/modules/nagios/files/nsca/send_nsca.cfg
new file mode 100644
index 00000000..8127226b
--- /dev/null
+++ b/puppet/modules/nagios/files/nsca/send_nsca.cfg
@@ -0,0 +1,65 @@
+# This file is managed by Puppet.
+#
+####################################################
+# Sample NSCA Client Config File 
+# Written by: Ethan Galstad (nagios@nagios.org)
+# 
+# Last Modified: 02-21-2002
+####################################################
+
+
+# ENCRYPTION PASSWORD
+# This is the password/passphrase that should be used to encrypt the
+# outgoing packets.  Note that the nsca daemon must use the same 
+# password when decrypting the packet!
+# IMPORTANT: You don't want all the users on this system to be able
+# to read the password you specify here, so make sure to set
+# restrictive permissions on this config file!
+
+#password=
+
+
+
+# ENCRYPTION METHOD
+# This option determines the method by which the send_nsca client will
+# encrypt the packets it sends to the nsca daemon.  The encryption
+# method you choose will be a balance between security and performance,
+# as strong encryption methods consume more processor resources.
+# You should evaluate your security needs when choosing an encryption
+# method.
+#
+# Note: The encryption method you specify here must match the
+#       decryption method the nsca daemon uses (as specified in
+#       the nsca.cfg file)!!
+# Values:
+# 	0 = None	(Do NOT use this option)
+#       1 = Simple XOR  (No security, just obfuscation, but very fast)
+#
+#       2 = DES
+#       3 = 3DES (Triple DES)
+#	4 = CAST-128
+#	5 = CAST-256
+#	6 = xTEA
+#	7 = 3WAY
+#	8 = BLOWFISH
+#	9 = TWOFISH
+#	10 = LOKI97
+#	11 = RC2
+#	12 = ARCFOUR
+#
+#	14 = RIJNDAEL-128
+#	15 = RIJNDAEL-192
+#	16 = RIJNDAEL-256
+#
+#	19 = WAKE
+#	20 = SERPENT
+#
+#	22 = ENIGMA (Unix crypt)
+#	23 = GOST
+#	24 = SAFER64
+#	25 = SAFER128
+#	26 = SAFER+
+#
+
+encryption_method=1
+