Squashed 'puppet/modules/apache/' content from commit 415e950

git-subtree-dir: puppet/modules/apache
git-subtree-split: 415e9504f99dca3ccaa4dfd389dde24ad9d0e01c

46 files changed, 3390 insertions, 0 deletions

diff --git a/files/conf.d/CentOS/ssl.conf b/files/conf.d/CentOS/ssl.conf
new file mode 100644
index 00000000..7f9be957
--- /dev/null
+++ b/files/conf.d/CentOS/ssl.conf
@@ -0,0 +1,76 @@
+#
+# This is the Apache server configuration file providing SSL support.
+# It contains the configuration directives to instruct the server how to
+# serve pages over an https connection. For detailing information about these 
+# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
+# 
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+
+LoadModule ssl_module modules/mod_ssl.so
+
+#
+# When we also provide SSL we have to listen to the 
+# the HTTPS port in addition.
+#
+Listen 443
+NameVirtualHost *:443
+
+##
+##  SSL Global Context
+##
+##  All SSL configuration in this context applies both to
+##  the main server and all SSL-enabled virtual hosts.
+##
+
+#
+#   Some MIME-types for downloading Certificates and CRLs
+#
+AddType application/x-x509-ca-cert .crt
+AddType application/x-pkcs7-crl    .crl
+
+#   Pass Phrase Dialog:
+#   Configure the pass phrase gathering process.
+#   The filtering dialog program (`builtin' is a internal
+#   terminal dialog) has to provide the pass phrase on stdout.
+SSLPassPhraseDialog  builtin
+
+#   Inter-Process Session Cache:
+#   Configure the SSL Session Cache: First the mechanism 
+#   to use and second the expiring timeout (in seconds).
+#SSLSessionCache        dc:UNIX:/var/cache/mod_ssl/distcache
+SSLSessionCache         shmcb:/var/cache/mod_ssl/scache(512000)
+SSLSessionCacheTimeout  300
+
+#   Semaphore:
+#   Configure the path to the mutual exclusion semaphore the
+#   SSL engine uses internally for inter-process synchronization. 
+SSLMutex default
+
+#   Pseudo Random Number Generator (PRNG):
+#   Configure one or more sources to seed the PRNG of the 
+#   SSL library. The seed data should be of good random quality.
+#   WARNING! On some platforms /dev/random blocks if not enough entropy
+#   is available. This means you then cannot use the /dev/random device
+#   because it would lead to very long connection times (as long as
+#   it requires to make more entropy available). But usually those
+#   platforms additionally provide a /dev/urandom device which doesn't
+#   block. So, if available, use this one instead. Read the mod_ssl User
+#   Manual for more details.
+SSLRandomSeed startup file:/dev/urandom  256
+SSLRandomSeed connect builtin
+#SSLRandomSeed startup file:/dev/random  512
+#SSLRandomSeed connect file:/dev/random  512
+#SSLRandomSeed connect file:/dev/urandom 512
+
+#
+# Use "SSLCryptoDevice" to enable any supported hardware
+# accelerators. Use "openssl engine -v" to list supported
+# engine names.  NOTE: If you enable an accelerator and the
+# server does not start, consult the error logs and ensure
+# your accelerator is functioning properly. 
+#
+SSLCryptoDevice builtin
+#SSLCryptoDevice ubsec
diff --git a/files/conf.d/CentOS/welcome.conf b/files/conf.d/CentOS/welcome.conf
new file mode 100644
index 00000000..7d7b0cd6
--- /dev/null
+++ b/files/conf.d/CentOS/welcome.conf
@@ -0,0 +1,10 @@
+# 
+# This configuration file enables the default "Welcome"
+# page if there is no default index page present for
+# the root URL.  To disable the Welcome page, comment
+# out all the lines below.
+#
+#<LocationMatch "^/+$">
+#    Options -Indexes
+#    ErrorDocument 403 /error/noindex.html
+#</LocationMatch>
diff --git a/files/conf.d/Debian/charset b/files/conf.d/Debian/charset
new file mode 100644
index 00000000..40d7198b
--- /dev/null
+++ b/files/conf.d/Debian/charset
@@ -0,0 +1,6 @@
+# Read the documentation before enabling AddDefaultCharset.
+# In general, it is only a good idea if you know that all your files
+# have this encoding. It will override any encoding given in the files
+# in meta http-equiv or xml encoding tags.
+
+#AddDefaultCharset UTF-8
diff --git a/files/conf.d/Debian/security b/files/conf.d/Debian/security
new file mode 100644
index 00000000..55b3e519
--- /dev/null
+++ b/files/conf.d/Debian/security
@@ -0,0 +1,50 @@
+#
+# Disable access to the entire file system except for the directories that
+# are explicitly allowed later.
+#
+# This currently breaks the configurations that come with some web application
+# Debian packages. It will be made the default for the release after lenny.
+#
+#<Directory />
+#	AllowOverride None
+#	Order Deny,Allow
+#	Deny from all
+#</Directory>
+
+
+# Changing the following options will not really affect the security of the
+# server, but might make attacks slightly more difficult in some cases.
+
+#
+# ServerTokens
+# This directive configures what you return as the Server HTTP response
+# Header. The default is 'Full' which sends information about the OS-Type
+# and compiled in modules.
+# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
+# where Full conveys the most information, and Prod the least.
+#
+#ServerTokens Minimal
+ServerTokens Full
+
+#
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (internal error documents, FTP directory
+# listings, mod_status and mod_info output etc., but not CGI generated
+# documents or custom error documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of:  On | Off | EMail
+#
+#ServerSignature Off
+ServerSignature On
+
+#
+# Allow TRACE method
+#
+# Set to "extended" to also reflect the request body (only for testing and
+# diagnostic purposes).
+#
+# Set to one of:  On | Off | extended
+#
+#TraceEnable Off
+TraceEnable On
+
diff --git a/files/conf.d/Debian/ssl.conf b/files/conf.d/Debian/ssl.conf
new file mode 100644
index 00000000..bcfe8201
--- /dev/null
+++ b/files/conf.d/Debian/ssl.conf
@@ -0,0 +1 @@
+NameVirtualHost *:443
diff --git a/files/conf.d/do_includes.conf b/files/conf.d/do_includes.conf
new file mode 100644
index 00000000..f44d9d4a
--- /dev/null
+++ b/files/conf.d/do_includes.conf
@@ -0,0 +1,5 @@
+#
+# Add index.shtml to the list of files that will be served as directory
+# indexes.
+#
+DirectoryIndex index.shtml
diff --git a/files/conf.d/git.conf b/files/conf.d/git.conf
new file mode 100644
index 00000000..c03ee2b5
--- /dev/null
+++ b/files/conf.d/git.conf
@@ -0,0 +1,5 @@
+# deny access to git repository folders
+<DirectoryMatch .*\.git/.*>
+    Order allow,deny
+    Deny From All
+</DirectoryMatch>
diff --git a/files/conf.d/mozilla_autoconfig.conf b/files/conf.d/mozilla_autoconfig.conf
new file mode 100644
index 00000000..6e4f7db8
--- /dev/null
+++ b/files/conf.d/mozilla_autoconfig.conf
@@ -0,0 +1,6 @@
+Alias /.well-known/autoconfig/mail/config-v1.1.xml /var/www/autoconfig/config.shtml
+<Directory /var/www/autoconfig/>
+  Options +Includes
+  AddType application/xml .shtml
+  AddOutputFilter INCLUDES .shtml
+</Directory>
diff --git a/files/conf.d/status.conf b/files/conf.d/status.conf
new file mode 100644
index 00000000..fb706cc1
--- /dev/null
+++ b/files/conf.d/status.conf
@@ -0,0 +1,24 @@
+###########################################################
+### this file is managed by PUPPET                     ####
+### only modify it in puppet repo or you will          ####
+### loose the changes !                                ####
+###########################################################
+
+# Allow server status reports generated by mod_status,
+# with the URL of http://servername/server-status
+<Location /server-status>
+    SetHandler server-status
+    Order deny,allow
+    Deny from all
+    Allow from 127.0.0.1
+
+    <IfModule mod_security2.c>
+	SecRuleEngine Off
+    </IfModule>
+</Location>
+
+# ExtendedStatus controls whether Apache will generate "full" status
+# information (ExtendedStatus On) or just basic information (ExtendedStatus
+# Off) when the "server-status" handler is called.
+ExtendedStatus On
+
diff --git a/files/conf.d/vhosts.conf b/files/conf.d/vhosts.conf
new file mode 100644
index 00000000..86485501
--- /dev/null
+++ b/files/conf.d/vhosts.conf
@@ -0,0 +1,8 @@
+###########################################################
+### this file is managed by PUPPET                     ####
+### only modify it in puppet repo or you will          ####
+### loose the changes !                                ####
+###########################################################
+
+NameVirtualHost *:80
+Include vhosts.d/*.conf
diff --git a/files/config/Debian.jessie/apache2.conf b/files/config/Debian.jessie/apache2.conf
new file mode 100644
index 00000000..7b1f96f5
--- /dev/null
+++ b/files/config/Debian.jessie/apache2.conf
@@ -0,0 +1,221 @@
+# This is the main Apache server configuration file.  It contains the
+# configuration directives that give the server its instructions.
+# See http://httpd.apache.org/docs/2.4/ for detailed information about
+# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
+# hints.
+#
+#
+# Summary of how the Apache 2 configuration works in Debian:
+# The Apache 2 web server configuration in Debian is quite different to
+# upstream's suggested way to configure the web server. This is because Debian's
+# default Apache2 installation attempts to make adding and removing modules,
+# virtual hosts, and extra configuration directives as flexible as possible, in
+# order to make automating the changes and administering the server as easy as
+# possible.
+
+# It is split into several files forming the configuration hierarchy outlined
+# below, all located in the /etc/apache2/ directory:
+#
+#   /etc/apache2/
+#   |-- apache2.conf
+#   |   `--  ports.conf
+#   |-- mods-enabled
+#   |   |-- *.load
+#   |   `-- *.conf
+#   |-- conf-enabled
+#   |   `-- *.conf
+#   `-- sites-enabled
+#       `-- *.conf
+#
+#
+# * apache2.conf is the main configuration file (this file). It puts the pieces
+#   together by including all remaining configuration files when starting up the
+#   web server.
+#
+# * ports.conf is always included from the main configuration file. It is
+#   supposed to determine listening ports for incoming connections which can be
+#   customized anytime.
+#
+# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
+#   directories contain particular configuration snippets which manage modules,
+#   global configuration fragments, or virtual host configurations,
+#   respectively.
+#
+#   They are activated by symlinking available configuration files from their
+#   respective *-available/ counterparts. These should be managed by using our
+#   helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
+#   their respective man pages for detailed information.
+#
+# * The binary is called apache2. Due to the use of environment variables, in
+#   the default configuration, apache2 needs to be started/stopped with
+#   /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
+#   work with the default configuration.
+
+
+# Global configuration
+#
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# NOTE!  If you intend to place this on an NFS (or otherwise network)
+# mounted filesystem then please read the Mutex documentation (available
+# at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
+# you will save yourself a lot of trouble.
+#
+# Do NOT add a slash at the end of the directory path.
+#
+#ServerRoot "/etc/apache2"
+
+#
+# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
+#
+Mutex file:${APACHE_LOCK_DIR} default
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+# This needs to be set in /etc/apache2/envvars
+#
+PidFile ${APACHE_PID_FILE}
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 5
+
+
+# These need to be set in /etc/apache2/envvars
+User ${APACHE_RUN_USER}
+Group ${APACHE_RUN_GROUP}
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here.  If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog ${APACHE_LOG_DIR}/error.log
+
+#
+# LogLevel: Control the severity of messages logged to the error_log.
+# Available values: trace8, ..., trace1, debug, info, notice, warn,
+# error, crit, alert, emerg.
+# It is also possible to configure the log level for particular modules, e.g.
+# "LogLevel info ssl:warn"
+#
+LogLevel warn
+
+# Include module configuration:
+IncludeOptional mods-enabled/*.load
+IncludeOptional mods-enabled/*.conf
+
+# Include list of ports to listen on
+Include ports.conf
+
+
+# Sets the default security model of the Apache2 HTTPD server. It does
+# not allow access to the root filesystem outside of /usr/share and /var/www.
+# The former is used by web applications packaged in Debian,
+# the latter may be used for local directories served by the web server. If
+# your system is serving content from a sub-directory in /srv you must allow
+# access here, or in any related virtual host.
+<Directory />
+    Options FollowSymLinks
+    AllowOverride None
+    Require all denied
+</Directory>
+
+<Directory /usr/share>
+    AllowOverride None
+    Require all granted
+</Directory>
+
+<Directory /var/www/>
+    Options Indexes FollowSymLinks
+    AllowOverride None
+    Require all granted
+</Directory>
+
+#<Directory /srv/>
+#   Options Indexes FollowSymLinks
+#   AllowOverride None
+#   Require all granted
+#</Directory>
+
+
+
+
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives.  See also the AllowOverride
+# directive.
+#
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+#
+<FilesMatch "^\.ht">
+    Require all denied
+</FilesMatch>
+
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive.
+#
+# These deviate from the Common Log Format definitions in that they use %O
+# (the actual bytes sent including headers) instead of %b (the size of the
+# requested file), because the latter makes it impossible to detect partial
+# requests.
+#
+# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
+# Use mod_remoteip instead.
+#
+LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
+LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %O" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+# Include of directories ignores editors' and dpkg's backup files,
+# see README.Debian for details.
+
+# Include generic snippets of statements
+IncludeOptional conf-enabled/*.conf
+
+# Include the virtual host configurations:
+IncludeOptional sites-enabled/*.conf
+
+# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
diff --git a/files/config/Debian.wheezy/apache2.conf b/files/config/Debian.wheezy/apache2.conf
new file mode 100644
index 00000000..50545671
--- /dev/null
+++ b/files/config/Debian.wheezy/apache2.conf
@@ -0,0 +1,268 @@
+# This is the main Apache server configuration file.  It contains the
+# configuration directives that give the server its instructions.
+# See http://httpd.apache.org/docs/2.2/ for detailed information about
+# the directives and /usr/share/doc/apache2-common/README.Debian.gz about
+# Debian specific hints.
+#
+#
+# Summary of how the Apache 2 configuration works in Debian:
+# The Apache 2 web server configuration in Debian is quite different to
+# upstream's suggested way to configure the web server. This is because Debian's
+# default Apache2 installation attempts to make adding and removing modules,
+# virtual hosts, and extra configuration directives as flexible as possible, in
+# order to make automating the changes and administering the server as easy as
+# possible.
+
+# It is split into several files forming the configuration hierarchy outlined
+# below, all located in the /etc/apache2/ directory:
+#
+#	/etc/apache2/
+#	|-- apache2.conf
+#	|	`--  ports.conf
+#	|-- mods-enabled
+#	|	|-- *.load
+#	|	`-- *.conf
+#	|-- conf.d
+#	|	`-- *
+# 	`-- sites-enabled
+#	 	`-- *
+#
+#
+# * apache2.conf is the main configuration file (this file). It puts the pieces
+#   together by including all remaining configuration files when starting up the
+#   web server.
+#
+#   In order to avoid conflicts with backup files, the Include directive is
+#   adapted to ignore files that:
+#   - do not begin with a letter or number
+#   - contain a character that is neither letter nor number nor _-:.
+#   - contain .dpkg
+#
+#   Yet we strongly suggest that all configuration files either end with a
+#   .conf or .load suffix in the file name. The next Debian release will
+#   ignore files not ending with .conf (or .load for mods-enabled).
+#
+# * ports.conf is always included from the main configuration file. It is
+#   supposed to determine listening ports for incoming connections, and which
+#   of these ports are used for name based virtual hosts.
+#
+# * Configuration files in the mods-enabled/ and sites-enabled/ directories
+#   contain particular configuration snippets which manage modules or virtual
+#   host configurations, respectively.
+#
+#   They are activated by symlinking available configuration files from their
+#   respective *-available/ counterparts. These should be managed by using our
+#   helpers a2enmod/a2dismod, a2ensite/a2dissite. See
+#   their respective man pages for detailed information.
+#
+# * Configuration files in the conf.d directory are either provided by other
+#   packages or may be added by the local administrator. Local additions
+#   should start with local- or end with .local.conf to avoid name clashes. All
+#   files in conf.d are considered (excluding the exceptions noted above) by
+#   the Apache 2 web server.
+#
+# * The binary is called apache2. Due to the use of environment variables, in
+#   the default configuration, apache2 needs to be started/stopped with
+#   /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
+#   work with the default configuration.
+
+
+# Global configuration
+#
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# NOTE!  If you intend to place this on an NFS (or otherwise network)
+# mounted filesystem then please read the LockFile documentation (available
+# at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
+# you will save yourself a lot of trouble.
+#
+# Do NOT add a slash at the end of the directory path.
+#
+#ServerRoot "/etc/apache2"
+
+#
+# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
+#
+LockFile ${APACHE_LOCK_DIR}/accept.lock
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+# This needs to be set in /etc/apache2/envvars
+#
+PidFile ${APACHE_PID_FILE}
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 5
+
+##
+## Server-Pool Size Regulation (MPM specific)
+## 
+
+# prefork MPM
+# StartServers: number of server processes to start
+# MinSpareServers: minimum number of server processes which are kept spare
+# MaxSpareServers: maximum number of server processes which are kept spare
+# MaxClients: maximum number of server processes allowed to start
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_prefork_module>
+    StartServers          5
+    MinSpareServers       5
+    MaxSpareServers      10
+    MaxClients          150
+    MaxRequestsPerChild   0
+</IfModule>
+
+# worker MPM
+# StartServers: initial number of server processes to start
+# MinSpareThreads: minimum number of worker threads which are kept spare
+# MaxSpareThreads: maximum number of worker threads which are kept spare
+# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a
+#              graceful restart. ThreadLimit can only be changed by stopping
+#              and starting Apache.
+# ThreadsPerChild: constant number of worker threads in each server process
+# MaxClients: maximum number of simultaneous client connections
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_worker_module>
+    StartServers          2
+    MinSpareThreads      25
+    MaxSpareThreads      75 
+    ThreadLimit          64
+    ThreadsPerChild      25
+    MaxClients          150
+    MaxRequestsPerChild   0
+</IfModule>
+
+# event MPM
+# StartServers: initial number of server processes to start
+# MinSpareThreads: minimum number of worker threads which are kept spare
+# MaxSpareThreads: maximum number of worker threads which are kept spare
+# ThreadsPerChild: constant number of worker threads in each server process
+# MaxClients: maximum number of simultaneous client connections
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_event_module>
+    StartServers          2
+    MinSpareThreads      25
+    MaxSpareThreads      75 
+    ThreadLimit          64
+    ThreadsPerChild      25
+    MaxClients          150
+    MaxRequestsPerChild   0
+</IfModule>
+
+# These need to be set in /etc/apache2/envvars
+User ${APACHE_RUN_USER}
+Group ${APACHE_RUN_GROUP}
+
+#
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives.  See also the AllowOverride
+# directive.
+#
+
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being 
+# viewed by Web clients. 
+#
+<Files ~ "^\.ht">
+    Order allow,deny
+    Deny from all
+    Satisfy all
+</Files>
+
+#
+# DefaultType is the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value.  If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+# It is also possible to omit any default MIME type and let the
+# client's browser guess an appropriate action instead. Typically the
+# browser will decide based on the file's extension then. In cases
+# where no good assumption can be made, letting the default MIME type
+# unset is suggested  instead of forcing the browser to accept
+# incorrect  metadata.
+#
+DefaultType None
+
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here.  If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog ${APACHE_LOG_DIR}/error.log
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+# Include module configuration:
+Include mods-enabled/*.load
+Include mods-enabled/*.conf
+
+# Include list of ports to listen on and which to use for name based vhosts
+Include ports.conf
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
+#
+LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
+LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %O" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+# Include of directories ignores editors' and dpkg's backup files,
+# see the comments above for details.
+
+# Include generic snippets of statements
+Include conf.d/
+
+# Include the virtual host configurations:
+Include sites-enabled/
diff --git a/files/config/Debian/apache2.conf b/files/config/Debian/apache2.conf
new file mode 100644
index 00000000..1e97b4eb
--- /dev/null
+++ b/files/config/Debian/apache2.conf
@@ -0,0 +1,230 @@
+#
+# Based upon the NCSA server configuration files originally by Rob McCool.
+#
+# This is the main Apache server configuration file.  It contains the
+# configuration directives that give the server its instructions.
+# See http://httpd.apache.org/docs/2.2/ for detailed information about
+# the directives.
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+# The configuration directives are grouped into three basic sections:
+#  1. Directives that control the operation of the Apache server process as a
+#     whole (the 'global environment').
+#  2. Directives that define the parameters of the 'main' or 'default' server,
+#     which responds to requests that aren't handled by a virtual host.
+#     These directives also provide default values for the settings
+#     of all virtual hosts.
+#  3. Settings for virtual hosts, which allow Web requests to be sent to
+#     different IP addresses or hostnames and have them handled by the
+#     same Apache server process.
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path.  If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "foo.log"
+# with ServerRoot set to "/etc/apache2" will be interpreted by the
+# server as "/etc/apache2/foo.log".
+#
+
+### Section 1: Global Environment
+#
+# The directives in this section affect the overall operation of Apache,
+# such as the number of concurrent requests it can handle or where it
+# can find its configuration files.
+#
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# NOTE!  If you intend to place this on an NFS (or otherwise network)
+# mounted filesystem then please read the LockFile documentation (available
+# at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
+# you will save yourself a lot of trouble.
+#
+# Do NOT add a slash at the end of the directory path.
+#
+#ServerRoot "/etc/apache2"
+
+#
+# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
+#
+LockFile ${APACHE_LOCK_DIR}/accept.lock
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+# This needs to be set in /etc/apache2/envvars
+#
+PidFile ${APACHE_PID_FILE}
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 15
+
+##
+## Server-Pool Size Regulation (MPM specific)
+## 
+
+# prefork MPM
+# StartServers: number of server processes to start
+# MinSpareServers: minimum number of server processes which are kept spare
+# MaxSpareServers: maximum number of server processes which are kept spare
+# MaxClients: maximum number of server processes allowed to start
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_prefork_module>
+    StartServers          5
+    MinSpareServers       5
+    MaxSpareServers      10
+    MaxClients          150
+    MaxRequestsPerChild   0
+</IfModule>
+
+# worker MPM
+# StartServers: initial number of server processes to start
+# MaxClients: maximum number of simultaneous client connections
+# MinSpareThreads: minimum number of worker threads which are kept spare
+# MaxSpareThreads: maximum number of worker threads which are kept spare
+# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a
+#              graceful restart. ThreadLimit can only be changed by stopping
+#              and starting Apache.
+# ThreadsPerChild: constant number of worker threads in each server process
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_worker_module>
+    StartServers          2
+    MinSpareThreads      25
+    MaxSpareThreads      75 
+    ThreadLimit          64
+    ThreadsPerChild      25
+    MaxClients          150
+    MaxRequestsPerChild   0
+</IfModule>
+
+# event MPM
+# StartServers: initial number of server processes to start
+# MaxClients: maximum number of simultaneous client connections
+# MinSpareThreads: minimum number of worker threads which are kept spare
+# MaxSpareThreads: maximum number of worker threads which are kept spare
+# ThreadsPerChild: constant number of worker threads in each server process
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_event_module>
+    StartServers          2
+    MaxClients          150
+    MinSpareThreads      25
+    MaxSpareThreads      75 
+    ThreadLimit          64
+    ThreadsPerChild      25
+    MaxRequestsPerChild   0
+</IfModule>
+
+# These need to be set in /etc/apache2/envvars
+User ${APACHE_RUN_USER}
+Group ${APACHE_RUN_GROUP}
+
+#
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives.  See also the AllowOverride
+# directive.
+#
+
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being 
+# viewed by Web clients. 
+#
+<Files ~ "^\.ht">
+    Order allow,deny
+    Deny from all
+    Satisfy all
+</Files>
+
+#
+# DefaultType is the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value.  If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here.  If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog ${APACHE_LOG_DIR}/error.log
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+# Include module configuration:
+Include mods-enabled/*.load
+Include mods-enabled/*.conf
+
+# Include all the user configurations:
+Include httpd.conf
+
+# Include ports listing
+Include ports.conf
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
+#
+LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
+LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %O" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+# Include of directories ignores editors' and dpkg's backup files,
+# see README.Debian for details.
+
+# Include generic snippets of statements
+Include conf.d/
+
+# Include the virtual host configurations:
+Include sites-enabled/
diff --git a/files/config/OpenBSD/httpd.conf b/files/config/OpenBSD/httpd.conf
new file mode 100644
index 00000000..09e452e6
--- /dev/null
+++ b/files/config/OpenBSD/httpd.conf
@@ -0,0 +1,1120 @@
+#	$OpenBSD: httpd.conf,v 1.22 2008/01/25 09:59:57 sthen Exp $
+#
+# Based upon the NCSA server configuration files originally by Rob McCool.
+#
+# This is the main Apache server configuration file.  It contains the
+# configuration directives that give the server its instructions.
+# See <URL:http://www.apache.org/docs/> for detailed information about
+# the directives.
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+# After this file is processed, the server will look for and process
+# /var/www/conf/srm.conf and then /var/www/conf/access.conf
+# unless you have overridden these with ResourceConfig and/or
+# AccessConfig directives here.
+#
+# The configuration directives are grouped into three basic sections:
+#  1. Directives that control the operation of the Apache server process as a
+#     whole (the 'global environment').
+#  2. Directives that define the parameters of the 'main' or 'default' server,
+#     which responds to requests that aren't handled by a virtual host.
+#     These directives also provide default values for the settings
+#     of all virtual hosts.
+#  3. Settings for virtual hosts, which allow Web requests to be sent to
+#     different IP addresses or hostnames and have them handled by the
+#     same Apache server process.
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path.  If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
+# with ServerRoot set to "/usr/local/apache" will be interpreted by the
+# server as "/usr/local/apache/logs/foo.log".
+#
+
+### Section 1: Global Environment
+#
+# The directives in this section affect the overall operation of Apache,
+# such as the number of concurrent requests it can handle or where it
+# can find its configuration files.
+#
+
+#
+# ServerType is either inetd, or standalone.  Inetd mode is only supported on
+# Unix platforms.
+#
+ServerType standalone
+
+#
+# ServerTokens is either Full, OS, Minimal, or ProductOnly.
+# The values define what version information is returned in the
+# Server header in HTTP responses.
+#
+# ServerTokens ProductOnly
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# NOTE!  If you intend to place this on an NFS (or otherwise network)
+# mounted filesystem then please read the LockFile documentation
+# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
+# you will save yourself a lot of trouble.
+#
+# Do NOT add a slash at the end of the directory path.
+#
+ServerRoot "/var/www"
+
+#
+# The LockFile directive sets the path to the lockfile used when Apache
+# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
+# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
+# its default value. The main reason for changing it is if the logs
+# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
+# DISK. The PID of the main server process is automatically appended to
+# the filename. 
+#
+#LockFile logs/accept.lock
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+#
+PidFile logs/httpd.pid
+#
+# ScoreBoardFile: File used to store internal server process information.
+# Not all architectures require this.  But if yours does (you'll know because
+# this file will be  created when you run Apache) then you *must* ensure that
+# no two invocations of Apache share the same scoreboard file.
+#
+ScoreBoardFile logs/apache_runtime_status
+
+#
+# In the standard configuration, the server will process httpd.conf,
+# srm.conf, and access.conf in that order.  The latter two files are
+# now deprecated and not installed any more, as it is recommended that 
+# all directives be kept in a single file for simplicity.  
+#
+#ResourceConfig conf/srm.conf
+#AccessConfig conf/access.conf
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 15
+
+#
+# Server-pool size regulation.  Rather than making you guess how many
+# server processes you need, Apache dynamically adapts to the load it
+# sees --- that is, it tries to maintain enough server processes to
+# handle the current load, plus a few spare servers to handle transient
+# load spikes (e.g., multiple simultaneous requests from a single
+# Netscape browser).
+#
+# It does this by periodically checking how many servers are waiting
+# for a request.  If there are fewer than MinSpareServers, it creates
+# a new spare.  If there are more than MaxSpareServers, some of the
+# spares die off.  The default values in httpd.conf-dist are probably OK
+# for most sites.
+#
+MinSpareServers 5
+MaxSpareServers 10
+
+#
+# Number of servers to start initially --- should be a reasonable ballpark
+# figure.
+#
+StartServers 5
+
+#
+# Limit on total number of servers running, i.e., limit on the number
+# of clients who can simultaneously connect --- if this limit is ever
+# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
+# It is intended mainly as a brake to keep a runaway server from taking
+# the system with it as it spirals down...
+#
+MaxClients 150
+
+#
+# MaxRequestsPerChild: the number of requests each child process is
+# allowed to process before the child dies.  The child will exit so
+# as to avoid problems after prolonged use when Apache (and maybe the
+# libraries it uses) leak memory or other resources.  On most systems, this
+# isn't really needed, but a few (such as Solaris) do have notable leaks
+# in the libraries.
+#
+MaxRequestsPerChild 0
+
+#
+# MaxFOOPerChild: these directives set the current and hard rlimits for
+# the child processes. Attempts to exceed them will cause the the OS to
+# take appropriate action. See the setrlimit(2) and signal(3).
+#
+MaxCPUPerChild 0
+MaxDATAPerChild 0
+MaxNOFILEPerChild 0
+MaxRSSPerChild 0
+MaxSTACKPerChild 0
+
+#
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, in addition to the default. See also the <VirtualHost>
+# directive.
+#
+#Listen 3000
+#Listen 12.34.56.78:80
+
+#
+# BindAddress: You can support virtual hosts with this option. This directive
+# is used to tell the server which IP address to listen to. It can either
+# contain "*", an IP address, or a fully qualified Internet domain name.
+# See also the <VirtualHost> and Listen directives.
+#
+#BindAddress *
+
+#
+# Dynamic Shared Object (DSO) Support
+#
+# To be able to use the functionality of a module which was built as a DSO you
+# have to place corresponding `LoadModule' lines at this location so the
+# directives contained in it are actually available _before_ they are used.
+# Please read the file README.DSO in the Apache 1.3 distribution for more
+# details about the DSO mechanism and run `httpd -l' for the list of already
+# built-in (statically linked and thus always available) modules in your httpd
+# binary.
+#
+# Note: The order is which modules are loaded is important.  Don't change
+# the order below without expert advice.
+#
+# Example:
+# LoadModule foo_module libexec/mod_foo.so
+
+# "anonymous" user access to authenticated areas
+# LoadModule anon_auth_module	/usr/lib/apache/modules/mod_auth_anon.so
+
+# user authentication using Berkeley DB files
+# LoadModule db_auth_module	/usr/lib/apache/modules/mod_auth_db.so
+
+# user authentication using DBM files
+# LoadModule dbm_auth_module	/usr/lib/apache/modules/mod_auth_dbm.so
+
+# authentication using new-style MD5 Digest Authentication (experimental)
+# LoadModule digest_auth_module	/usr/lib/apache/modules/mod_auth_digest.so
+
+# CERN httpd metafile semantics
+# LoadModule cern_meta_module	/usr/lib/apache/modules/mod_cern_meta.so
+
+# configuration defines ($xxx)
+# LoadModule define_module	/usr/lib/apache/modules/mod_define.so
+
+# user authentication using old-style MD5 Digest Authentication
+# LoadModule digest_module	/usr/lib/apache/modules/mod_digest.so
+
+# generation of Expires HTTP headers according to user-specified criteria
+# LoadModule expires_module	/usr/lib/apache/modules/mod_expires.so
+
+# customization of HTTP response headers
+# LoadModule headers_module	/usr/lib/apache/modules/mod_headers.so
+
+# comprehensive overview of the server configuration
+# LoadModule info_module		/usr/lib/apache/modules/mod_info.so
+
+# logging of the client user agents (deprecated in favor of mod_log_config)
+# LoadModule agent_log_module	/usr/lib/apache/modules/mod_log_agent.so
+
+# logging of referers (deprecated in favor of mod_log_config)
+# LoadModule referer_log_module	/usr/lib/apache/modules/mod_log_referer.so
+
+# determining the MIME type of a file by looking at a few bytes of its contents
+# LoadModule mime_magic_module	/usr/lib/apache/modules/mod_mime_magic.so
+
+# mmap()ing of a statically configured list of frequently requested but 
+# not changed files (experimental)
+# LoadModule mmap_static_module	/usr/lib/apache/modules/mod_mmap_static.so
+
+# rule-based rewriting engine to rewrite requested URLs on the fly
+# LoadModule rewrite_module	/usr/lib/apache/modules/mod_rewrite.so
+
+# attempt to correct misspellings of URLs that users might have entered
+# LoadModule speling_module	/usr/lib/apache/modules/mod_speling.so
+
+# provides an environment variable with a unique identifier for each request
+# LoadModule unique_id_module	/usr/lib/apache/modules/mod_unique_id.so
+
+# uses cookies to provide for a clickstream log of user activity on a site
+# LoadModule usertrack_module	/usr/lib/apache/modules/mod_usertrack.so
+
+# dynamically configured mass virtual hosting
+# LoadModule vhost_alias_module	/usr/lib/apache/modules/mod_vhost_alias.so
+
+# caching proxy
+# LoadModule proxy_module	/usr/lib/apache/modules/libproxy.so
+
+#
+# Include extra module configuration files
+#
+Include /var/www/conf/modules/*.conf
+
+#
+# ExtendedStatus controls whether Apache will generate "full" status
+# information (ExtendedStatus On) or just basic information (ExtendedStatus
+# Off) when the "server-status" handler is called. The default is Off.
+#
+#ExtendedStatus On
+
+### Section 2: 'Main' server configuration
+#
+# The directives in this section set up the values used by the 'main'
+# server, which responds to any requests that aren't handled by a
+# <VirtualHost> definition.  These values also provide defaults for
+# any <VirtualHost> containers you may define later in the file.
+#
+# All of these directives may appear inside <VirtualHost> containers,
+# in which case these default settings will be overridden for the
+# virtual host being defined.
+#
+
+#
+# If your ServerType directive (set earlier in the 'Global Environment'
+# section) is set to "inetd", the next few directives don't have any
+# effect since their settings are defined by the inetd configuration.
+# Skip ahead to the ServerAdmin directive.
+#
+
+#
+# Port: The port to which the standalone server listens. For
+# ports < 1023, you will need httpd to be run as root initially.
+#
+Port 80
+
+##
+##  SSL Support
+##
+##  When we also provide SSL we have to listen to the 
+##  standard HTTP port (see above) and to the HTTPS port
+##
+<IfDefine SSL>
+Listen 80
+Listen 443
+</IfDefine>
+
+#
+# If you wish httpd to run as a different user or group, you must run
+# httpd as root initially and it will switch.  
+#
+# User/Group: The name (or #number) of the user/group to run httpd as.
+#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
+#  . On HPUX you may not be able to use shared memory as nobody, and the
+#    suggested workaround is to create a user www and use that user.
+#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
+#  when the value of (unsigned)Group is above 60000; 
+#  don't use Group #-1 on these systems!
+#  On OpenBSD, use user www, group www.
+#
+User www
+Group www
+
+#
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed.  This address appears on some server-generated pages, such
+# as error documents.
+#
+ServerAdmin you@your.address
+
+#
+# ServerName allows you to set a host name which is sent back to clients for
+# your server if it's different than the one the program would get (i.e., use
+# "www" instead of the host's real name).
+#
+# Note: You cannot just invent host names and hope they work. The name you 
+# define here must be a valid DNS name for your host. If you don't understand
+# this, ask your network administrator.
+# If your host doesn't have a registered DNS name, enter its IP address here.
+# You will have to access it by its address (e.g., http://123.45.67.89/)
+# anyway, and this will make redirections work in a sensible way.
+#
+#ServerName new.host.name
+
+#
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+DocumentRoot "/var/www/htdocs"
+
+#
+# Each directory to which Apache has access, can be configured with respect
+# to which services and features are allowed and/or disabled in that
+# directory (and its subdirectories). 
+#
+# First, we configure the "default" to be a very restrictive set of 
+# permissions.  
+#
+<Directory />
+    Options FollowSymLinks
+    AllowOverride None
+</Directory>
+
+#
+# Note that from this point forward you must specifically allow
+# particular features to be enabled - so if something's not working as
+# you might expect, make sure that you have specifically enabled it
+# below.
+#
+
+#
+# This should be changed to whatever you set DocumentRoot to.
+#
+<Directory "/var/www/htdocs">
+
+#
+# This may also be "None", "All", or any combination of "Indexes",
+# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
+#
+# Note that "MultiViews" must be named *explicitly* --- "Options All"
+# doesn't give it to you.
+#
+    Options Indexes FollowSymLinks
+
+#
+# This controls which options the .htaccess files in directories can
+# override. Can also be "All", or any combination of "Options", "FileInfo", 
+# "AuthConfig", and "Limit"
+#
+    AllowOverride None
+
+#
+# Controls who can get stuff from this server.
+#
+    Order allow,deny
+    Allow from all
+</Directory>
+
+#
+# UserDir: The directory which is prepended onto a users username, within 
+# which a users's web pages are looked for if a ~user request is received. 
+# Relative pathes are relative to the user's home directory.
+#
+# "disabled" turns this feature off.
+#
+# Since httpd will chroot(2) to the ServerRoot path by default,
+# you should use
+#	UserDir /var/www/users
+# and create per user directories in /var/www/users/<username>
+#
+
+UserDir disabled
+
+#
+# Control access to UserDir directories.  The following is an example
+# for a site where these directories are restricted to read-only and
+# are located under /users/<username>
+# You will need to change this to match your site's home directories.
+#
+#<Directory /users/*>
+#    AllowOverride FileInfo AuthConfig Limit
+#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
+#    <Limit GET POST OPTIONS PROPFIND>
+#        Order allow,deny
+#        Allow from all
+#    </Limit>
+#    <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
+#        Order deny,allow
+#        Deny from all
+#    </Limit>
+#</Directory>
+
+#
+# DirectoryIndex: Name of the file or files to use as a pre-written HTML
+# directory index.  Separate multiple entries with spaces.
+#
+DirectoryIndex index.html
+
+#
+# AccessFileName: The name of the file to look for in each directory
+# for access control information.
+#
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess files from being viewed by
+# Web clients.  Since .htaccess files often contain authorization
+# information, access is disallowed for security reasons.  Comment
+# these lines out if you want Web visitors to see the contents of
+# .htaccess files.  If you change the AccessFileName directive above,
+# be sure to make the corresponding changes here.
+#
+<Files .htaccess>
+    Order allow,deny
+    Deny from all
+</Files>
+
+#
+# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
+# document that was negotiated on the basis of content. This asks proxy
+# servers not to cache the document. Uncommenting the following line disables
+# this behavior, and proxies will be allowed to cache the documents.
+#
+#CacheNegotiatedDocs
+
+#
+# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
+# Apache needs to construct a self-referencing URL (a URL that refers back
+# to the server the response is coming from) it will use ServerName and
+# Port to form a "canonical" name.  With this setting off, Apache will
+# use the hostname:port that the client supplied, when possible.  This
+# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
+#
+UseCanonicalName On
+
+#
+# TypesConfig describes where the mime.types file (or equivalent) is
+# to be found.
+#
+TypesConfig conf/mime.types
+
+#
+# DefaultType is the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value.  If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+#
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type.  The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+# mod_mime_magic is not part of the default server (you have to add
+# it yourself with a LoadModule [see the DSO paragraph in the 'Global
+# Environment' section], or recompile the server and include mod_mime_magic
+# as part of the configuration), so it's enclosed in an <IfModule> container.
+# This means that the MIMEMagicFile directive will only be processed if the
+# module is part of the server.
+#
+<IfModule mod_mime_magic.c>
+    MIMEMagicFile conf/magic
+</IfModule>
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+#
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here.  If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+# Either a filename or the text "syslog:" followed by a facility
+# name may be specified here.
+#
+#ErrorLog syslog:daemon
+ErrorLog logs/error_log
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+#
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %b" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+#
+# The location and format of the access logfile (Common Logfile Format).
+# If you do not define any access logfiles within a <VirtualHost>
+# container, they will be logged here.  Contrariwise, if you *do*
+# define per-<VirtualHost> access logfiles, transactions will be
+# logged therein and *not* in this file.
+#
+CustomLog logs/access_log common
+
+#
+# If you would like to have agent and referer logfiles, uncomment the
+# following directives.
+#
+#CustomLog logs/referer_log referer
+#CustomLog logs/agent_log agent
+
+#
+# If you prefer a single logfile with access, agent, and referer information
+# (Combined Logfile Format) you can use the following directive.
+#
+#CustomLog logs/access_log combined
+
+#
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (error documents, FTP directory listings,
+# mod_status and mod_info output etc., but not CGI generated documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of:  On | Off | EMail
+#
+# ServerSignature Off
+
+#
+# Aliases: Add here as many aliases as you need (with no limit). The format is 
+# Alias fakename realname
+#
+# Note that if you include a trailing / on fakename then the server will
+# require it to be present in the URL.  So "/icons" isn't aliased in this
+# example, only "/icons/"..
+#
+Alias /icons/ "/var/www/icons/"
+
+<Directory "/var/www/icons">
+    Options Indexes MultiViews
+    AllowOverride None
+    Order allow,deny
+    Allow from all
+</Directory>
+
+<Directory "/var/www/htdocs/manual">
+    Options MultiViews
+    AllowOverride None
+    Order allow,deny
+    Allow from all
+</Directory>
+
+#
+# ScriptAlias: This controls which directories contain server scripts.
+# ScriptAliases are essentially the same as Aliases, except that
+# documents in the realname directory are treated as applications and
+# run by the server when requested rather than as documents sent to the client.
+# The same rules about trailing "/" apply to ScriptAlias directives as to
+# Alias.
+#
+ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
+
+#
+# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+#
+<Directory "/var/www/cgi-bin">
+    AllowOverride None
+    Options None
+    Order allow,deny
+    Allow from all
+</Directory>
+
+#
+# Redirect allows you to tell clients about documents which used to exist in
+# your server's namespace, but do not anymore. This allows you to tell the
+# clients where to look for the relocated document.
+# Format: Redirect old-URI new-URL
+#
+
+#
+# Directives controlling the display of server-generated directory listings.
+#
+
+#
+# FancyIndexing is whether you want fancy directory indexing or standard
+#
+IndexOptions FancyIndexing
+
+#
+# AddIcon* directives tell the server which icon to show for different
+# files or filename extensions.  These are only displayed for
+# FancyIndexed directories.
+#
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+
+#
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+#
+DefaultIcon /icons/unknown.gif
+
+#
+# AddDescription allows you to place a short description after a file in
+# server-generated indexes.  These are only displayed for FancyIndexed
+# directories.
+# Format: AddDescription "description" filename
+#
+#AddDescription "GZIP compressed document" .gz
+#AddDescription "tar archive" .tar
+#AddDescription "GZIP compressed tar archive" .tgz
+
+#
+# ReadmeName is the name of the README file the server will look for by
+# default, and append to directory listings.
+#
+# HeaderName is the name of a file which should be prepended to
+# directory indexes. 
+#
+# The server will first look for name.html and include it if found.
+# If name.html doesn't exist, the server will then look for name.txt
+# and include it as plaintext if found.
+#
+ReadmeName README
+HeaderName HEADER
+
+#
+# IndexIgnore is a set of filenames which directory indexing should ignore
+# and not include in the listing.  Shell-style wildcarding is permitted.
+#
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+
+#
+# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
+# information on the fly. Note: Not all browsers support this.
+# Despite the name similarity, the following Add* directives have nothing
+# to do with the FancyIndexing customization directives above.
+#
+AddEncoding x-compress Z
+AddEncoding x-gzip gz
+
+#
+# AddLanguage allows you to specify the language of a document. You can
+# then use content negotiation to give a browser a file in a language
+# it can understand.  Note that the suffix does not have to be the same
+# as the language keyword --- those with documents in Polish (whose
+# net-standard language code is pl) may wish to use "AddLanguage pl .po" 
+# to avoid the ambiguity with the common suffix for perl scripts.
+#
+AddLanguage en .en
+AddLanguage fr .fr
+AddLanguage de .de
+AddLanguage da .da
+AddLanguage el .el
+AddLanguage it .it
+
+#
+# LanguagePriority allows you to give precedence to some languages
+# in case of a tie during content negotiation.
+# Just list the languages in decreasing order of preference.
+#
+LanguagePriority en fr de
+
+#
+# AddType allows you to tweak mime.types without actually editing it, or to
+# make certain files to be certain types.
+#
+# For example, the PHP module (not part of the Apache distribution)
+# will typically use:
+#
+#AddType application/x-httpd-php .php
+
+#
+# AddHandler allows you to map certain file extensions to "handlers",
+# actions unrelated to filetype. These can be either built into the server
+# or added with the Action command (see below)
+#
+# If you want to use server side includes, or CGI outside
+# ScriptAliased directories, uncomment the following lines.
+#
+# To use CGI scripts:
+#
+#AddHandler cgi-script .cgi
+
+#
+# To use server-parsed HTML files
+#
+#AddType text/html .shtml
+#AddHandler server-parsed .shtml
+
+#
+# Uncomment the following line to enable Apache's send-asis HTTP file
+# feature
+#
+#AddHandler send-as-is asis
+
+#
+# If you wish to use server-parsed imagemap files, use
+#
+#AddHandler imap-file map
+
+#
+# To enable type maps, you might want to use
+#
+#AddHandler type-map var
+
+#
+# Action lets you define media types that will execute a script whenever
+# a matching file is called. This eliminates the need for repeated URL
+# pathnames for oft-used CGI file processors.
+# Format: Action media/type /cgi-script/location
+# Format: Action handler-name /cgi-script/location
+#
+
+#
+# MetaDir: specifies the name of the directory in which Apache can find
+# meta information files. These files contain additional HTTP headers
+# to include when sending the document
+#
+#MetaDir .web
+
+#
+# MetaSuffix: specifies the file name suffix for the file containing the
+# meta information.
+#
+#MetaSuffix .meta
+
+#
+# Customizable error response (Apache style)
+#  these come in three flavors
+#
+#    1) plain text
+#ErrorDocument 500 "The server made a boo boo.
+#  n.b.  the (") marks it as text, it does not get output
+#
+#    2) local redirects
+#ErrorDocument 404 /missing.html
+#  to redirect to local URL /missing.html
+#ErrorDocument 404 /cgi-bin/missing_handler.pl
+#  N.B.: You can redirect to a script or a document using server-side-includes.
+#
+#    3) external redirects
+#ErrorDocument 402 http://some.other_server.com/subscription_info.html
+#  N.B.: Many of the environment variables associated with the original
+#  request will *not* be available to such a script.
+
+#
+# The following directives modify normal HTTP response behavior.
+# The first directive disables keepalive for Netscape 2.x and browsers that
+# spoof it. There are known problems with these browser implementations.
+# The second directive is for Microsoft Internet Explorer 4.0b2
+# which has a broken HTTP/1.1 implementation and does not properly
+# support keepalive when it is used on 301 or 302 (redirect) responses.
+#
+BrowserMatch "Mozilla/2" nokeepalive
+BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
+
+#
+# The following directive disables HTTP/1.1 responses to browsers which
+# are in violation of the HTTP/1.0 spec by not being able to grok a
+# basic 1.1 response.
+#
+BrowserMatch "RealPlayer 4\.0" force-response-1.0
+BrowserMatch "Java/1\.0" force-response-1.0
+BrowserMatch "JDK/1\.0" force-response-1.0
+
+#
+# Allow server status reports, with the URL of http://servername/server-status
+# Change the ".your_domain.com" to match your domain to enable.
+#
+#<Location /server-status>
+#    SetHandler server-status
+#    Order deny,allow
+#    Deny from all
+#    Allow from .your_domain.com
+#</Location>
+
+#
+# Allow remote server configuration reports, with the URL of
+#  http://servername/server-info (requires that mod_info.c be loaded).
+# Change the ".your_domain.com" to match your domain to enable.
+#
+#<Location /server-info>
+#    SetHandler server-info
+#    Order deny,allow
+#    Deny from all
+#    Allow from .your_domain.com
+#</Location>
+
+#
+# There have been reports of people trying to abuse an old bug from pre-1.1
+# days.  This bug involved a CGI script distributed as a part of Apache.
+# By uncommenting these lines you can redirect these attacks to a logging 
+# script on phf.apache.org.  Or, you can record them yourself, using the script
+# support/phf_abuse_log.cgi.
+#
+#<Location /cgi-bin/phf*>
+#    Deny from all
+#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
+#</Location>
+
+#
+# Proxy Server directives. Uncomment the following lines to
+# enable the proxy server:
+#
+#<IfModule mod_proxy.c>
+#ProxyRequests On
+#
+#<Directory proxy:*>
+#    Order deny,allow
+#    Deny from all
+#    Allow from .your_domain.com
+#</Directory>
+
+#
+# Enable/disable the handling of HTTP/1.1 "Via:" headers.
+# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
+# Set to one of: Off | On | Full | Block
+#
+#ProxyVia On
+
+#
+# To enable the cache as well, edit and uncomment the following lines:
+# (no cacheing without CacheRoot)
+#
+#CacheRoot "/var/www/proxy"
+#CacheSize 5
+#CacheGcInterval 4
+#CacheMaxExpire 24
+#CacheLastModifiedFactor 0.1
+#CacheDefaultExpire 1
+#NoCache a_domain.com another_domain.edu joes.garage_sale.com
+
+#</IfModule>
+# End of proxy directives.
+
+### Section 3: Virtual Hosts
+#
+# VirtualHost: If you want to maintain multiple domains/hostnames on your
+# machine you can setup VirtualHost containers for them.
+# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
+# for further details before you try to setup virtual hosts.
+# You may use the command line option '-S' to verify your virtual host
+# configuration.
+
+#
+# If you want to use name-based virtual hosts you need to define at
+# least one IP address (and port number) for them.
+#
+#NameVirtualHost 12.34.56.78:80
+#NameVirtualHost 12.34.56.78
+
+#
+# VirtualHost example:
+# Almost any Apache directive may go into a VirtualHost container.
+#
+#<VirtualHost ip.address.of.host.some_domain.com>
+#    ServerAdmin webmaster@host.some_domain.com
+#    DocumentRoot /www/docs/host.some_domain.com
+#    ServerName host.some_domain.com
+#    ErrorLog logs/host.some_domain.com-error_log
+#    CustomLog logs/host.some_domain.com-access_log common
+#</VirtualHost>
+
+#<VirtualHost _default_:*>
+#</VirtualHost>
+
+
+##
+##  SSL Global Context
+##
+##  All SSL configuration in this context applies both to
+##  the main server and all SSL-enabled virtual hosts.
+##
+
+#
+#   Some MIME-types for downloading Certificates and CRLs
+#
+<IfDefine SSL>
+AddType application/x-x509-ca-cert .crt
+AddType application/x-pkcs7-crl    .crl
+</IfDefine>
+
+<IfModule mod_ssl.c>
+
+#   Pass Phrase Dialog:
+#   Configure the pass phrase gathering process.
+#   The filtering dialog program (`builtin' is a internal
+#   terminal dialog) has to provide the pass phrase on stdout.
+SSLPassPhraseDialog  builtin
+
+#   Inter-Process Session Cache:
+#   Configure the SSL Session Cache: First either `none'
+#   or `dbm:/path/to/file' for the mechanism to use and
+#   second the expiring timeout (in seconds).
+SSLSessionCache         dbm:logs/ssl_scache
+SSLSessionCacheTimeout  300
+
+#   Semaphore:
+#   Configure the path to the mutual exclusion semaphore the
+#   SSL engine uses internally for inter-process synchronization. 
+SSLMutex  sem
+
+#   Pseudo Random Number Generator (PRNG):
+#   Configure one or more sources to seed the PRNG of the 
+#   SSL library. The seed data should be of good random quality.
+SSLRandomSeed startup builtin
+SSLRandomSeed connect builtin
+#SSLRandomSeed startup file:/dev/random  512
+#SSLRandomSeed startup file:/dev/urandom 512
+#SSLRandomSeed connect file:/dev/random  512
+#SSLRandomSeed connect file:/dev/urandom 512
+SSLRandomSeed startup file:/dev/arandom  512
+
+#   Logging:
+#   The home of the dedicated SSL protocol logfile. Errors are
+#   additionally duplicated in the general error log file.  Put
+#   this somewhere where it cannot be used for symlink attacks on
+#   a real server (i.e. somewhere where only root can write).
+#   Log levels are (ascending order: higher ones include lower ones):
+#   none, error, warn, info, trace, debug.
+SSLLog      logs/ssl_engine_log
+SSLLogLevel info
+
+</IfModule>
+
+<IfDefine SSL>
+
+##
+## SSL Virtual Host Context
+##
+
+<VirtualHost _default_:443>
+
+#  General setup for the virtual host
+DocumentRoot /var/www/htdocs
+ServerName new.host.name
+ServerAdmin you@your.address
+ErrorLog logs/error_log
+TransferLog logs/access_log
+
+#   SSL Engine Switch:
+#   Enable/Disable SSL for this virtual host.
+SSLEngine on
+
+#   SSL Cipher Suite:
+#   List the ciphers that the client is permitted to negotiate.
+#   See the mod_ssl documentation for a complete list.
+#SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP
+
+#   Server Certificate:
+#   Point SSLCertificateFile at a PEM encoded certificate.  If
+#   the certificate is encrypted, then you will be prompted for a
+#   pass phrase.  Note that a kill -HUP will prompt again. A test
+#   certificate can be generated with `make certificate' under
+#   built time.
+SSLCertificateFile    /etc/ssl/server.crt
+
+#   Server Private Key:
+#   If the key is not combined with the certificate, use this
+#   directive to point at the key file.
+SSLCertificateKeyFile /etc/ssl/private/server.key
+
+#   Certificate Authority (CA):
+#   Set the CA certificate verification path where to find CA
+#   certificates for client authentication or alternatively one
+#   huge file containing all of them (file must be PEM encoded)
+#   Note: Inside SSLCACertificatePath you need hash symlinks
+#         to point to the certificate files. Use the provided
+#         Makefile to update the hash symlinks after changes.
+#SSLCACertificatePath    /var/www/conf/ssl.crt
+#SSLCACertificateFile    /var/www/conf/ssl.crt/ca-bundle.crt
+
+#   Client Authentication (Type):
+#   Client certificate verification type and depth.  Types are
+#   none, optional, require and optional_no_ca.  Depth is a
+#   number which specifies how deeply to verify the certificate
+#   issuer chain before deciding the certificate is not valid.
+#SSLVerifyClient require
+#SSLVerifyDepth  10
+
+#   Access Control:
+#   With SSLRequire you can do per-directory access control based
+#   on arbitrary complex boolean expressions containing server
+#   variable checks and other lookup directives.  The syntax is a
+#   mixture between C and Perl.  See the mod_ssl documentation
+#   for more details.
+#<Location />
+#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
+#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
+#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
+#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
+#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
+#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
+#</Location>
+
+#   SSL Engine Options:
+#   Set various options for the SSL engine.
+#   FakeBasicAuth:
+#     Translate the client X.509 into a Basic Authorisation.  This means that
+#     the standard Auth/DBMAuth methods can be used for access control.  The
+#     user name is the `one line' version of the client's X.509 certificate.
+#     Note that no password is obtained from the user. Every entry in the user
+#     file needs this password: `xxj31ZMTZzkVA'.
+#   ExportCertData:
+#     This exports two additional environment variables: SSL_CLIENT_CERT and
+#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
+#     server (always existing) and the client (only existing when client
+#     authentication is used). This can be used to import the certificates
+#     into CGI scripts.
+#   CompatEnvVars:
+#     This exports obsolete environment variables for backward compatibility
+#     to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
+#     to provide compatibility to existing CGI scripts.
+#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars
+
+#   Per-Server Logging:
+#   The home of a custom SSL log file. Use this when you want a
+#   compact non-error SSL logfile on a virtual host basis.
+CustomLog logs/ssl_request_log \
+          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
+
+</VirtualHost>                                  
+
+</IfDefine>
+
+# include additional things
+Include conf.d/*.conf
+Include vhosts.d/*.conf
diff --git a/files/include.d/defaults.inc b/files/include.d/defaults.inc
new file mode 100644
index 00000000..3e5e7d73
--- /dev/null
+++ b/files/include.d/defaults.inc
@@ -0,0 +1,5 @@
+RewriteEngine on
+RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
+RewriteRule .* - [F]
+
+ServerSignature Off
diff --git a/files/include.d/joomla.inc b/files/include.d/joomla.inc
new file mode 100644
index 00000000..1535ce37
--- /dev/null
+++ b/files/include.d/joomla.inc
@@ -0,0 +1,30 @@
+########## Begin - Rewrite rules to block out some common exploits
+#          against joomla's
+#                             
+# Block out any script trying to set a mosConfig value through the URL
+RewriteCond %{QUERY_STRING} mosConfig_[a-zA-Z_]{1,21}(=|\%3D) [OR]
+
+# Block out any script trying to base64_encode crap to send via URL
+RewriteCond %{QUERY_STRING} base64_encode.*\(.*\) [OR]
+
+# Block out any script that includes a <script> tag in URL
+RewriteCond %{QUERY_STRING} (\<|%3C).*script.*(\>|%3E) [NC,OR]
+
+# Block out any script trying to set a PHP GLOBALS variable via URL
+RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR]
+
+# Block out any script trying to modify a _REQUEST variable via URL
+RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) [OR]
+
+# Block out any script that tries to set CONFIG_EXT (com_extcal2 issue)
+RewriteCond %{QUERY_STRING} CONFIG_EXT(\[|\%20|\%5B).*= [NC,OR]
+
+# Block out any script that tries to set sbp or sb_authorname via URL (simpleboard) 
+RewriteCond %{QUERY_STRING} sbp(=|\%20|\%3D) [OR]
+RewriteCond %{QUERY_STRING} sb_authorname(=|\%20|\%3D)
+
+# Send all blocked request to homepage with 403 Forbidden error!
+RewriteRule ^(.*)$ index.php [F,L]
+#
+########## End - Rewrite rules to block out some common exploits
+
diff --git a/files/include.d/silverstripe.inc b/files/include.d/silverstripe.inc
new file mode 100644
index 00000000..40c44e46
--- /dev/null
+++ b/files/include.d/silverstripe.inc
@@ -0,0 +1,17 @@
+# silverstripe .htaccess
+<Files *.ss>
+  Order deny,allow
+  Deny from all
+  #Allow from 127.0.0.1
+</Files>
+
+<IfModule mod_rewrite.c>
+  RewriteEngine On
+  #RewriteBase /
+
+  RewriteCond %{REQUEST_URI} !(\.gif$)|(\.jpg$)|(\.png$)|(\.css$)|(\.js$)
+
+  RewriteCond %{REQUEST_URI} ^(.*)$
+  RewriteCond %{REQUEST_FILENAME} !-f
+  RewriteRule .* sapphire/main.php?url=%1&%{QUERY_STRING} [L]
+</IfModule>
diff --git a/files/itk_plus/conf.d/CentOS/ssl.conf b/files/itk_plus/conf.d/CentOS/ssl.conf
new file mode 100644
index 00000000..fb0c915a
--- /dev/null
+++ b/files/itk_plus/conf.d/CentOS/ssl.conf
@@ -0,0 +1,75 @@
+#
+# This is the Apache server configuration file providing SSL support.
+# It contains the configuration directives to instruct the server how to
+# serve pages over an https connection. For detailing information about these 
+# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
+# 
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+
+LoadModule ssl_module modules/mod_ssl.so
+
+#
+# When we also provide SSL we have to listen to the 
+# the HTTPS port in addition.
+#
+NameVirtualHost *:443
+
+##
+##  SSL Global Context
+##
+##  All SSL configuration in this context applies both to
+##  the main server and all SSL-enabled virtual hosts.
+##
+
+#
+#   Some MIME-types for downloading Certificates and CRLs
+#
+AddType application/x-x509-ca-cert .crt
+AddType application/x-pkcs7-crl    .crl
+
+#   Pass Phrase Dialog:
+#   Configure the pass phrase gathering process.
+#   The filtering dialog program (`builtin' is a internal
+#   terminal dialog) has to provide the pass phrase on stdout.
+SSLPassPhraseDialog  builtin
+
+#   Inter-Process Session Cache:
+#   Configure the SSL Session Cache: First the mechanism 
+#   to use and second the expiring timeout (in seconds).
+#SSLSessionCache        dc:UNIX:/var/cache/mod_ssl/distcache
+SSLSessionCache         shmcb:/var/cache/mod_ssl/scache(512000)
+SSLSessionCacheTimeout  300
+
+#   Semaphore:
+#   Configure the path to the mutual exclusion semaphore the
+#   SSL engine uses internally for inter-process synchronization. 
+SSLMutex default
+
+#   Pseudo Random Number Generator (PRNG):
+#   Configure one or more sources to seed the PRNG of the 
+#   SSL library. The seed data should be of good random quality.
+#   WARNING! On some platforms /dev/random blocks if not enough entropy
+#   is available. This means you then cannot use the /dev/random device
+#   because it would lead to very long connection times (as long as
+#   it requires to make more entropy available). But usually those
+#   platforms additionally provide a /dev/urandom device which doesn't
+#   block. So, if available, use this one instead. Read the mod_ssl User
+#   Manual for more details.
+SSLRandomSeed startup file:/dev/urandom  256
+SSLRandomSeed connect builtin
+#SSLRandomSeed startup file:/dev/random  512
+#SSLRandomSeed connect file:/dev/random  512
+#SSLRandomSeed connect file:/dev/urandom 512
+
+#
+# Use "SSLCryptoDevice" to enable any supported hardware
+# accelerators. Use "openssl engine -v" to list supported
+# engine names.  NOTE: If you enable an accelerator and the
+# server does not start, consult the error logs and ensure
+# your accelerator is functioning properly. 
+#
+SSLCryptoDevice builtin
+#SSLCryptoDevice ubsec
diff --git a/files/modules.d/Gentoo/00_default_settings.conf b/files/modules.d/Gentoo/00_default_settings.conf
new file mode 100644
index 00000000..5315fcb7
--- /dev/null
+++ b/files/modules.d/Gentoo/00_default_settings.conf
@@ -0,0 +1,105 @@
+# This configuration file reflects default settings for Apache HTTP Server.
+# You may change these, but chances are that you may not need to.
+
+# Timeout: The number of seconds before receives and sends time out.
+Timeout 300
+
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+KeepAlive On
+
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+MaxKeepAliveRequests 100
+
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+KeepAliveTimeout 15
+
+# UseCanonicalName: Determines how Apache constructs self-referencing
+# URLs and the SERVER_NAME and SERVER_PORT variables.
+# When set "Off", Apache will use the Hostname and Port supplied
+# by the client.  When set "On", Apache will use the value of the
+# ServerName directive.
+UseCanonicalName Off
+
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives.  See also the AllowOverride
+# directive.
+AccessFileName .htaccess
+
+# ServerTokens
+# This directive configures what you return as the Server HTTP response
+# Header. The default is 'Full' which sends information about the OS-Type
+# and compiled in modules.
+# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
+# where Full conveys the most information, and Prod the least.
+ServerTokens Prod
+
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (internal error documents, FTP directory
+# listings, mod_status and mod_info output etc., but not CGI generated
+# documents or custom error documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of:  On | Off | EMail
+ServerSignature Off
+
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+HostnameLookups Off
+
+# EnableMMAP and EnableSendfile: On systems that support it,
+# memory-mapping or the sendfile syscall is used to deliver
+# files.  This usually improves server performance, but must
+# be turned off when serving from networked-mounted 
+# filesystems or if support for these functions is otherwise
+# broken on your system.
+#EnableMMAP off
+#EnableSendfile off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here.  If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+ErrorLog /var/log/apache2/error_log
+
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+LogLevel warn
+
+# We configure the "default" to be a very restrictive set of features.
+<Directory />
+	Options FollowSymLinks
+	AllowOverride None
+	Order deny,allow
+	Deny from all
+</Directory>
+
+# DirectoryIndex: sets the file that Apache will serve if a directory
+# is requested.
+#
+# The index.html.var file (a type-map) is used to deliver content-
+# negotiated documents. The MultiViews Options can be used for the
+# same purpose, but it is much slower.
+#
+# To add files to that list use AddDirectoryIndex in a custom config
+# file. Do not change this entry unless you know what you are doing.
+<IfModule dir_module>
+	DirectoryIndex index.html index.html.var
+</IfModule>
+
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+<FilesMatch "^\.ht">
+	Order allow,deny
+	Deny from all
+</FilesMatch>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/00_error_documents.conf b/files/modules.d/Gentoo/00_error_documents.conf
new file mode 100644
index 00000000..90900269
--- /dev/null
+++ b/files/modules.d/Gentoo/00_error_documents.conf
@@ -0,0 +1,66 @@
+# The configuration below implements multi-language error documents through
+# content-negotiation.
+
+# Customizable error responses come in three flavors:
+# 1) plain text 2) local redirects 3) external redirects
+# Some examples:
+#ErrorDocument 500 "The server made a boo boo."
+#ErrorDocument 404 /missing.html
+#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
+#ErrorDocument 402 http://www.example.com/subscription_info.html
+
+# Required modules: mod_alias, mod_include, mod_negotiation
+# We use Alias to redirect any /error/HTTP_<error>.html.var response to
+# our collection of by-error message multi-language collections. We use
+# includes to substitute the appropriate text.
+# You can modify the messages' appearance without changing any of the
+# default HTTP_<error>.html.var files by adding the line:
+#   Alias /error/include/ "/your/include/path/"
+# which allows you to create your own set of files by starting with the
+# /var/www/localhost/error/include/ files and copying them to /your/include/path/, 
+# even on a per-VirtualHost basis. The default include files will display
+# your Apache version number and your ServerAdmin email address regardless
+# of the setting of ServerSignature.
+
+<IfDefine ERRORDOCS>
+<IfModule alias_module>
+<IfModule mime_module>
+<IfModule negotiation_module>
+
+Alias /error/ "/var/www/localhost/error/"
+
+<Directory "/var/www/localhost/error">
+	AllowOverride None
+	Options IncludesNoExec
+	AddOutputFilter Includes html
+	AddHandler type-map var
+	Order allow,deny
+	Allow from all
+	LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
+	ForceLanguagePriority Prefer Fallback
+</Directory>
+
+ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
+ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
+ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
+ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
+ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
+ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
+ErrorDocument 410 /error/HTTP_GONE.html.var
+ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
+ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
+ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
+ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
+ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
+ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
+ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
+ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
+ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
+ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
+
+</IfModule>
+</IfModule>
+</IfModule>
+</IfDefine>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/00_languages.conf b/files/modules.d/Gentoo/00_languages.conf
new file mode 100644
index 00000000..287f6544
--- /dev/null
+++ b/files/modules.d/Gentoo/00_languages.conf
@@ -0,0 +1,137 @@
+# Settings for hosting different languages.
+<IfDefine LANGUAGE>
+<IfModule mime_module>
+<IfModule negotiation_module>
+# DefaultLanguage and AddLanguage allows you to specify the language of
+# a document. You can then use content negotiation to give a browser a
+# file in a language the user can understand.
+#
+# Specify a default language. This means that all data
+# going out without a specific language tag (see below) will
+# be marked with this one. You probably do NOT want to set
+# this unless you are sure it is correct for all cases.
+#
+# It is generally better to not mark a page as
+# being a certain language than marking it with the wrong
+# language!
+#
+# DefaultLanguage nl
+#
+# Note 1: The suffix does not have to be the same as the language
+# keyword --- those with documents in Polish (whose net-standard
+# language code is pl) may wish to use "AddLanguage pl .po" to
+# avoid the ambiguity with the common suffix for perl scripts.
+#
+# Note 2: The example entries below illustrate that in some cases
+# the two character 'Language' abbreviation is not identical to
+# the two character 'Country' code for its country,
+# E.g. 'Danmark/dk' versus 'Danish/da'.
+#
+# Note 3: In the case of 'ltz' we violate the RFC by using a three char
+# specifier. There is 'work in progress' to fix this and get
+# the reference data for rfc1766 cleaned up.
+#
+# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
+# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
+# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
+# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
+# Norwegian (no) - Polish (pl) - Portugese (pt)
+# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
+# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
+AddLanguage ca .ca
+AddLanguage cs .cz .cs
+AddLanguage da .dk
+AddLanguage de .de
+AddLanguage el .el
+AddLanguage en .en
+AddLanguage eo .eo
+AddLanguage es .es
+AddLanguage et .et
+AddLanguage fr .fr
+AddLanguage he .he
+AddLanguage hr .hr
+AddLanguage it .it
+AddLanguage ja .ja
+AddLanguage ko .ko
+AddLanguage ltz .ltz
+AddLanguage nl .nl
+AddLanguage nn .nn
+AddLanguage no .no
+AddLanguage pl .po
+AddLanguage pt .pt
+AddLanguage pt-BR .pt-br
+AddLanguage ru .ru
+AddLanguage sv .sv
+AddLanguage zh-CN .zh-cn
+AddLanguage zh-TW .zh-tw
+
+# LanguagePriority allows you to give precedence to some languages
+# in case of a tie during content negotiation.
+#
+# Just list the languages in decreasing order of preference. We have
+# more or less alphabetized them here. You probably want to change this.
+LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
+
+# ForceLanguagePriority allows you to serve a result page rather than
+# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
+# [in case no accepted languages matched the available variants]
+ForceLanguagePriority Prefer Fallback
+
+# Commonly used filename extensions to character sets. You probably
+# want to avoid clashes with the language extensions, unless you
+# are good at carefully testing your setup after each change.
+# See http://www.iana.org/assignments/character-sets for the
+# official list of charset names and their respective RFCs.
+AddCharset us-ascii.ascii	.us-ascii
+AddCharset ISO-8859-1		.iso8859-1 .latin1
+AddCharset ISO-8859-2		.iso8859-2 .latin2 .cen
+AddCharset ISO-8859-3		.iso8859-3 .latin3
+AddCharset ISO-8859-4		.iso8859-4 .latin4
+AddCharset ISO-8859-5		.iso8859-5 .cyr .iso-ru
+AddCharset ISO-8859-6		.iso8859-6 .arb .arabic
+AddCharset ISO-8859-7		.iso8859-7 .grk .greek
+AddCharset ISO-8859-8		.iso8859-8 .heb .hebrew
+AddCharset ISO-8859-9		.iso8859-9 .latin5 .trk
+AddCharset ISO-8859-10		.iso8859-10 .latin6
+AddCharset ISO-8859-13		.iso8859-13
+AddCharset ISO-8859-14		.iso8859-14 .latin8
+AddCharset ISO-8859-15		.iso8859-15 .latin9
+AddCharset ISO-8859-16		.iso8859-16 .latin10
+AddCharset ISO-2022-JP		.iso2022-jp .jis
+AddCharset ISO-2022-KR		.iso2022-kr .kis
+AddCharset ISO-2022-CN		.iso2022-cn .cis
+AddCharset Big5.Big5		.big5 .b5
+AddCharset cn-Big5			.cn-big5
+# For russian, more than one charset is used (depends on client, mostly):
+AddCharset WINDOWS-1251		.cp-1251 .win-1251
+AddCharset CP866			.cp866
+AddCharset KOI8				.koi8
+AddCharset KOI8-E			.koi8-e
+AddCharset KOI8-r			.koi8-r .koi8-ru
+AddCharset KOI8-U			.koi8-u
+AddCharset KOI8-ru			.koi8-uk .ua
+AddCharset ISO-10646-UCS-2	.ucs2
+AddCharset ISO-10646-UCS-4	.ucs4
+AddCharset UTF-7			.utf7
+AddCharset UTF-8			.utf8
+AddCharset UTF-16			.utf16
+AddCharset UTF-16BE			.utf16be
+AddCharset UTF-16LE			.utf16le
+AddCharset UTF-32			.utf32
+AddCharset UTF-32BE			.utf32be
+AddCharset UTF-32LE			.utf32le
+AddCharset euc-cn			.euc-cn
+AddCharset euc-gb			.euc-gb
+AddCharset euc-jp			.euc-jp
+AddCharset euc-kr			.euc-kr
+# Not sure how euc-tw got in - IANA doesn't list it???
+AddCharset EUC-TW			.euc-tw
+AddCharset gb2312			.gb2312 .gb
+AddCharset iso-10646-ucs-2	.ucs-2 .iso-10646-ucs-2
+AddCharset iso-10646-ucs-4	.ucs-4 .iso-10646-ucs-4
+AddCharset shift_jis		.shift_jis .sjis
+</IfModule>
+</IfModule>
+</IfDefine>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/00_mod_autoindex.conf b/files/modules.d/Gentoo/00_mod_autoindex.conf
new file mode 100644
index 00000000..2512357d
--- /dev/null
+++ b/files/modules.d/Gentoo/00_mod_autoindex.conf
@@ -0,0 +1,83 @@
+<IfModule autoindex_module>
+<IfModule alias_module>
+# We include the /icons/ alias for FancyIndexed directory listings.  If
+# you do not use FancyIndexing, you may comment this out.
+Alias /icons/ "/var/www/localhost/icons/"
+
+<Directory "/var/www/localhost/icons">
+	Options Indexes MultiViews
+	AllowOverride None
+	Order allow,deny
+	Allow from all
+</Directory>
+</IfModule>
+
+# Directives controlling the display of server-generated directory listings.
+#
+# To see the listing of a directory, the Options directive for the
+# directory must include "Indexes", and the directory must not contain
+# a file matching those listed in the DirectoryIndex directive.
+
+# IndexOptions: Controls the appearance of server-generated directory
+# listings.
+IndexOptions FancyIndexing VersionSort
+
+# AddIcon* directives tell the server which icon to show for different
+# files or filename extensions.  These are only displayed for
+# FancyIndexed directories.
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+DefaultIcon /icons/unknown.gif
+
+# AddDescription allows you to place a short description after a file in
+# server-generated indexes.  These are only displayed for FancyIndexed
+# directories.
+# Format: AddDescription "description" filename
+
+#AddDescription "GZIP compressed document" .gz
+#AddDescription "tar archive" .tar
+#AddDescription "GZIP compressed tar archive" .tgz
+
+# ReadmeName is the name of the README file the server will look for by
+# default, and append to directory listings.
+
+# HeaderName is the name of a file which should be prepended to 
+# directory indexes. 
+ReadmeName README.html
+HeaderName HEADER.html
+
+# IndexIgnore is a set of filenames which directory indexing should ignore
+# and not include in the listing.  Shell-style wildcarding is permitted.
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+</IfModule>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/00_mod_info.conf b/files/modules.d/Gentoo/00_mod_info.conf
new file mode 100644
index 00000000..53fd7aea
--- /dev/null
+++ b/files/modules.d/Gentoo/00_mod_info.conf
@@ -0,0 +1,14 @@
+<IfDefine INFO>
+<IfModule info_module>
+# Allow remote server configuration reports, with the URL of
+# http://servername/server-info
+<Location /server-info>
+	SetHandler server-info
+	Order deny,allow
+	Deny from all
+	Allow from 127.0.0.1
+</Location>
+</IfModule>
+</IfDefine>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/00_mod_log_config.conf b/files/modules.d/Gentoo/00_mod_log_config.conf
new file mode 100644
index 00000000..2f4244c9
--- /dev/null
+++ b/files/modules.d/Gentoo/00_mod_log_config.conf
@@ -0,0 +1,35 @@
+<IfModule log_config_module>
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %b" common
+
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-Agent}i" agent
+LogFormat "%v %h %l %u %t \"%r\" %>s %b %T" script
+LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i VLOG=%{VLOG}e" vhost
+
+<IfModule logio_module>
+# You need to enable mod_logio.c to use %I and %O
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
+LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" vhostio
+</IfModule>
+
+# The location and format of the access logfile (Common Logfile Format).
+# If you do not define any access logfiles within a <VirtualHost>
+# container, they will be logged here.  Contrariwise, if you *do*
+# define per-<VirtualHost> access logfiles, transactions will be
+# logged therein and *not* in this file.
+CustomLog /var/log/apache2/access_log common
+
+# If you would like to have agent and referer logfiles,
+# uncomment the following directives.
+#CustomLog /var/log/apache2/referer_log referer
+#CustomLog /var/log/apache2/agent_logs agent
+
+# If you prefer a logfile with access, agent, and referer information
+# (Combined Logfile Format) you can use the following directive.
+#CustomLog /var/log/apache2/access_log combined
+</IfModule>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/00_mod_mime.conf b/files/modules.d/Gentoo/00_mod_mime.conf
new file mode 100644
index 00000000..51f23d55
--- /dev/null
+++ b/files/modules.d/Gentoo/00_mod_mime.conf
@@ -0,0 +1,55 @@
+# DefaultType: the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value.  If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+DefaultType text/plain
+
+<IfModule mime_module>
+# TypesConfig points to the file containing the list of mappings from
+# filename extension to MIME-type.
+TypesConfig /etc/mime.types
+
+# AddType allows you to add to or override the MIME configuration
+# file specified in TypesConfig for specific file types.
+#AddType application/x-gzip .tgz
+
+# AddEncoding allows you to have certain browsers uncompress
+# information on the fly. Note: Not all browsers support this.
+#AddEncoding x-compress .Z
+#AddEncoding x-gzip .gz .tgz
+
+# If the AddEncoding directives above are commented-out, then you
+# probably should define those extensions to indicate media types:
+AddType application/x-compress .Z
+AddType application/x-gzip .gz .tgz
+
+# AddHandler allows you to map certain file extensions to "handlers":
+# actions unrelated to filetype. These can be either built into the server
+# or added with the Action directive (see below)
+
+# To use CGI scripts outside of ScriptAliased directories:
+# (You will also need to add "ExecCGI" to the "Options" directive.)
+#AddHandler cgi-script .cgi
+
+# For type maps (negotiated resources):
+#AddHandler type-map var
+
+# Filters allow you to process content before it is sent to the client.
+#
+# To parse .shtml files for server-side includes (SSI):
+# (You will also need to add "Includes" to the "Options" directive.)
+#AddType text/html .shtml
+#AddOutputFilter INCLUDES .shtml
+</IfModule>
+
+<IfModule mime_magic_module>
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type.  The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+MIMEMagicFile /etc/apache2/magic
+</IfModule>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/00_mod_status.conf b/files/modules.d/Gentoo/00_mod_status.conf
new file mode 100644
index 00000000..fa906766
--- /dev/null
+++ b/files/modules.d/Gentoo/00_mod_status.conf
@@ -0,0 +1,19 @@
+<IfDefine STATUS>
+<IfModule status_module>
+# Allow server status reports generated by mod_status,
+# with the URL of http://servername/server-status
+<Location /server-status>
+	SetHandler server-status
+	Order deny,allow
+	Deny from all
+	Allow from 127.0.0.1
+</Location>
+
+# ExtendedStatus controls whether Apache will generate "full" status
+# information (ExtendedStatus On) or just basic information (ExtendedStatus
+# Off) when the "server-status" handler is called.
+ExtendedStatus On
+</IfModule>
+</IfDefine>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/00_mod_userdir.conf b/files/modules.d/Gentoo/00_mod_userdir.conf
new file mode 100644
index 00000000..3fb69117
--- /dev/null
+++ b/files/modules.d/Gentoo/00_mod_userdir.conf
@@ -0,0 +1,40 @@
+# Settings for user home directories
+
+<IfDefine USERDIR>
+<IfModule userdir_module>
+
+# UserDir: The name of the directory that is appended onto a user's home
+# directory if a ~user request is received.  Note that you must also set
+# the default access control for these directories, as in the example below.
+UserDir public_html
+
+# Control access to UserDir directories.  The following is an example
+# for a site where these directories are restricted to read-only.
+<Directory /home/*/public_html>
+	AllowOverride FileInfo AuthConfig Limit Indexes
+	Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
+	<Limit GET POST OPTIONS>
+		Order allow,deny
+		Allow from all
+	</Limit>
+	<LimitExcept GET POST OPTIONS>
+		Order deny,allow
+		Deny from all
+	</LimitExcept>
+</Directory>
+
+# Suexec isn't really required to run cgi-scripts, but it's a really good
+# idea if you have multiple users serving websites...
+<IfDefine SUEXEC>
+<IfModule suexec_module>
+<Directory /home/*/public_html/cgi-bin>
+	Options ExecCGI
+	SetHandler cgi-script
+</Directory>
+</IfModule>
+</IfDefine>
+
+</IfModule>
+</IfDefine>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/00_mpm.conf b/files/modules.d/Gentoo/00_mpm.conf
new file mode 100644
index 00000000..01833059
--- /dev/null
+++ b/files/modules.d/Gentoo/00_mpm.conf
@@ -0,0 +1,102 @@
+# Server-Pool Management (MPM specific)
+
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+#
+# Note that this is the default PidFile for most MPMs.
+PidFile /var/run/apache2.pid
+
+# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
+#LockFile /var/run/apache2.lock
+
+# Only one of the below sections will be relevant on your
+# installed httpd.  Use "/usr/sbin/apache2 -l" to find out the
+# active mpm.
+
+# common MPM configuration
+# These configuration directives apply to all MPMs
+#
+# StartServers: Number of child server processes created at startup
+# MaxClients: Maximum number of child processes to serve requests
+# MaxRequestsPerChild: Limit on the number of requests that an individual child
+#                      server will handle during its life
+
+
+# prefork MPM
+# This is the default MPM if USE=-threads
+#
+# MinSpareServers: Minimum number of idle child server processes
+# MaxSpareServers: Maximum number of idle child server processes
+<IfModule mpm_prefork_module>
+	StartServers		5
+	MinSpareServers		5
+	MaxSpareServers		10
+	MaxClients			150
+	MaxRequestsPerChild	10000
+</IfModule>
+
+# worker MPM
+# This is the default MPM if USE=threads
+#
+# MinSpareThreads: Minimum number of idle threads available to handle request spikes
+# MaxSpareThreads: Maximum number of idle threads
+# ThreadsPerChild: Number of threads created by each child process
+<IfModule mpm_worker_module>
+	StartServers		2
+	MinSpareThreads		25
+	MaxSpareThreads		75
+	ThreadsPerChild		25
+	MaxClients			150
+	MaxRequestsPerChild	10000
+</IfModule>
+
+# event MPM
+#
+# MinSpareThreads: Minimum number of idle threads available to handle request spikes
+# MaxSpareThreads: Maximum number of idle threads
+# ThreadsPerChild: Number of threads created by each child process
+<IfModule mpm_event_module>
+	StartServers		2
+	MinSpareThreads		25
+	MaxSpareThreads		75
+	ThreadsPerChild		25
+	MaxClients			150
+	MaxRequestsPerChild	10000
+</IfModule>
+
+# peruser MPM
+#
+# MinSpareProcessors: Minimum number of idle child server processes
+# MinProcessors: Minimum number of processors per virtual host
+# MaxProcessors: Maximum number of processors per virtual host
+# ExpireTimeout: Maximum idle time before a child is killed, 0 to disable
+# Multiplexer: Specify a Multiplexer child configuration.
+# Processor: Specify a user and group for a specific child process
+<IfModule mpm_peruser_module>
+	MinSpareProcessors	2
+	MinProcessors		2
+	MaxProcessors		10
+	MaxClients			150
+	MaxRequestsPerChild	1000
+	ExpireTimeout		1800
+
+	# KeepAlive *MUST* be set to off
+	KeepAlive Off
+
+	Multiplexer nobody nobody
+	Processor apache apache
+</IfModule>
+
+# itk MPM
+#
+# MinSpareServers: Minimum number of idle child server processes
+# MaxSpareServers: Maximum number of idle child server processes
+<IfModule mpm_itk_module>
+	StartServers		5
+	MinSpareServers		5
+	MaxSpareServers		10
+	MaxClients			150
+	MaxRequestsPerChild	10000
+</IfModule>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/10_mod_mem_cache.conf b/files/modules.d/Gentoo/10_mod_mem_cache.conf
new file mode 100644
index 00000000..ad7fa9e0
--- /dev/null
+++ b/files/modules.d/Gentoo/10_mod_mem_cache.conf
@@ -0,0 +1,10 @@
+<IfDefine MEM_CACHE>
+# 128MB cache for objects < 2MB
+CacheEnable mem /
+MCacheSize 131072
+MCacheMaxObjectCount 1000
+MCacheMinObjectSize 1
+MCacheMaxObjectSize 2048
+</IfDefine>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/40_mod_ssl.conf b/files/modules.d/Gentoo/40_mod_ssl.conf
new file mode 100644
index 00000000..331783a6
--- /dev/null
+++ b/files/modules.d/Gentoo/40_mod_ssl.conf
@@ -0,0 +1,65 @@
+# Note: The following must must be present to support
+# starting without SSL on platforms with no /dev/random equivalent
+# but a statically compiled-in mod_ssl.
+<IfModule ssl_module>
+SSLRandomSeed startup builtin
+SSLRandomSeed connect builtin
+</IfModule>
+
+<IfDefine SSL>
+<IfModule ssl_module>
+# This is the Apache server configuration file providing SSL support.
+# It contains the configuration directives to instruct the server how to
+# serve pages over an https connection. For detailing information about these 
+# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
+
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders. If you are unsure
+# consult the online docs. You have been warned.
+
+## Pseudo Random Number Generator (PRNG):
+# Configure one or more sources to seed the PRNG of the SSL library.
+# The seed data should be of good random quality.
+# WARNING! On some platforms /dev/random blocks if not enough entropy
+# is available. This means you then cannot use the /dev/random device
+# because it would lead to very long connection times (as long as
+# it requires to make more entropy available). But usually those
+# platforms additionally provide a /dev/urandom device which doesn't
+# block. So, if available, use this one instead. Read the mod_ssl User
+# Manual for more details.
+#SSLRandomSeed startup file:/dev/random  512
+#SSLRandomSeed startup file:/dev/urandom 512
+#SSLRandomSeed connect file:/dev/random  512
+#SSLRandomSeed connect file:/dev/urandom 512
+
+## SSL Global Context:
+# All SSL configuration in this context applies both to the main server and 
+# all SSL-enabled virtual hosts.
+
+# Some MIME-types for downloading Certificates and CRLs
+<IfModule mime_module>
+	AddType application/x-x509-ca-cert .crt
+	AddType application/x-pkcs7-crl    .crl
+</IfModule>
+
+## Pass Phrase Dialog:
+# Configure the pass phrase gathering process. The filtering dialog program 
+# (`builtin' is a internal terminal dialog) has to provide the pass phrase on
+# stdout.
+SSLPassPhraseDialog  builtin
+
+## Inter-Process Session Cache:
+# Configure the SSL Session Cache: First the mechanism  to use and second the
+# expiring timeout (in seconds).
+#SSLSessionCache		dbm:/var/run/ssl_scache
+SSLSessionCache			shmcb:/var/run/ssl_scache(512000)
+SSLSessionCacheTimeout  300
+
+## Semaphore:
+# Configure the path to the mutual exclusion semaphore the SSL engine uses
+# internally for inter-process synchronization.
+SSLMutex  file:/var/run/ssl_mutex
+</IfModule>
+</IfDefine>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/45_mod_dav.conf b/files/modules.d/Gentoo/45_mod_dav.conf
new file mode 100644
index 00000000..b15ca017
--- /dev/null
+++ b/files/modules.d/Gentoo/45_mod_dav.conf
@@ -0,0 +1,56 @@
+<IfDefine DAV>
+<IfModule dav_module>
+<IfModule dav_fs_module>
+DavLockDB "/var/lib/dav/lockdb"
+
+# The following example gives DAV write access to a directory called
+# "uploads" under the ServerRoot directory.
+<IfModule alias_module>
+<IfModule auth_digest_module>
+<IfModule authn_file_module>
+Alias /uploads "/var/www/uploads"
+
+<Directory "/var/www/uploads">
+	Dav On
+
+	AuthType Digest
+	AuthName DAV-upload
+
+	# You can use the htdigest program to create the password database:
+	#   htdigest -c "/var/www/.htpasswd-dav" DAV-upload admin
+	AuthUserFile "/var/www/.htpasswd-dav"
+
+	# Allow access from any host
+	Order allow,deny
+	Allow from all
+
+	# Allow universal read-access, but writes are restricted
+	# to the admin user.
+	<LimitExcept GET OPTIONS>
+		require user admin
+	</LimitExcept>
+</Directory>
+</IfModule>
+</IfModule>
+</IfModule>
+
+</IfModule>
+</IfModule>
+
+# The following directives disable redirects on non-GET requests for
+# a directory that does not include the trailing slash.  This fixes a 
+# problem with several clients that do not appropriately handle 
+# redirects for folders with DAV methods.
+<IfModule setenvif_module>
+BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
+BrowserMatch "MS FrontPage" redirect-carefully
+BrowserMatch "^WebDrive" redirect-carefully
+BrowserMatch "^WebDAVFS/1.[012345]" redirect-carefully
+BrowserMatch "^gnome-vfs/1.0" redirect-carefully
+BrowserMatch "^XML Spy" redirect-carefully
+BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
+</IfModule>
+
+</IfDefine>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/46_mod_ldap.conf b/files/modules.d/Gentoo/46_mod_ldap.conf
new file mode 100644
index 00000000..837bc6e6
--- /dev/null
+++ b/files/modules.d/Gentoo/46_mod_ldap.conf
@@ -0,0 +1,29 @@
+# Examples below are taken from the online documentation
+# Refer to:
+# http://localhost/manual/mod/mod_ldap.html
+# http://localhost/manual/mod/mod_auth_ldap.html
+<IfDefine LDAP>
+<IfModule ldap_module>
+LDAPSharedCacheSize	200000
+LDAPCacheEntries	1024
+LDAPCacheTTL		600
+LDAPOpCacheEntries	1024
+LDAPOpCacheTTL		600
+
+<Location /ldap-status>
+	SetHandler ldap-status
+	Order deny,allow
+	Deny from all
+	Allow from 127.0.0.1
+</Location>
+</IfModule>
+</IfDefine>
+
+<IfDefine AUTHNZ_LDAP>
+<IfModule authnz_ldap_module>
+	#AuthLDAPURL ldap://ldap1.airius.com:389/ou=People, o=Airius?uid?sub?(objectClass=*)
+	#require valid-user
+</IfModule>
+</IfDefine>
+
+# vim: ts=4 filetype=apache
diff --git a/files/modules.d/Gentoo/70_mod_php5.conf b/files/modules.d/Gentoo/70_mod_php5.conf
new file mode 100644
index 00000000..a8254359
--- /dev/null
+++ b/files/modules.d/Gentoo/70_mod_php5.conf
@@ -0,0 +1,18 @@
+<IfDefine PHP5>
+	# Load the module first
+	<IfModule !mod_php5.c>
+		LoadModule php5_module    modules/libphp5.so
+	</IfModule>
+
+	# Set it to handle the files
+	<IfModule mod_mime.c>
+		AddType application/x-httpd-php .php
+		AddType application/x-httpd-php .phtml
+		AddType application/x-httpd-php .php3
+		AddType application/x-httpd-php .php4
+		AddType application/x-httpd-php .php5
+		AddType application/x-httpd-php-source .phps
+	</IfModule>
+
+	DirectoryIndex index.php index.phtml
+</IfDefine>
diff --git a/files/munin/apache_activity b/files/munin/apache_activity
new file mode 100755
index 00000000..65fc0722
--- /dev/null
+++ b/files/munin/apache_activity
@@ -0,0 +1,99 @@
+#!/usr/bin/perl
+#
+# Parameters supported:
+#
+# 	config
+# 	autoconf
+#
+# Configurable variables
+#
+# 	url      - Override default status-url
+#
+# Magic markers:
+#%# family=auto
+#%# capabilities=autoconf
+
+my $ret = undef;
+if (!eval "require LWP::UserAgent;") {
+    $ret = "LWP::UserAgent not found";
+}
+
+my $URL = exists $ENV{'url'} ? $ENV{'url'} : "http://127.0.0.1:%d/server-status?auto";
+my @PORTS = exists $ENV{'ports'} ? split(' ', $ENV{'ports'}) : (80);
+my %chars = (
+	     # '\_' => 'Waiting',
+	     # 'S' => 'Starting up',
+	     'R' => 'Reading request',
+	     'W' => 'Sending reply',
+	     'K' => 'Keepalive',
+	     'D' => 'DNS lookup',
+	     'C' => 'Closing',
+	     # 'L' => 'Logging',
+	     # 'G' => 'Gracefully finishing',
+	     # 'I' => 'Idle cleanup',
+	     # '\.' => 'Open slot',
+	     );
+
+#    "_" Waiting for Connection, "S" Starting up, "R" Reading Request,
+#    "W" Sending Reply, "K" Keepalive (read), "D" DNS Lookup,
+#    "C" Closing connection, "L" Logging, "G" Gracefully finishing,
+#    "I" Idle cleanup of worker, "." Open slot with no current process
+
+if (exists $ARGV[0] and $ARGV[0] eq "autoconf") {
+    if ($ret) {
+	print "no ($ret)\n";
+	exit 1;
+    }
+    my $ua = LWP::UserAgent->new(timeout => 30);
+    my @badports;
+    
+    foreach my $port (@PORTS) {
+	my $url = sprintf $URL, $port;
+	my $response = $ua->request(HTTP::Request->new('GET',$url));
+	push @badports, $port unless $response->is_success and $response->content =~ /Scoreboard/im;
+    }
+    
+    if (@badports) {
+	print "no (no apache server-status on ports @badports)\n";
+	exit 1;
+    } else {
+	print "yes\n";
+	exit 0;
+    }
+}
+
+if (exists $ARGV[0] and $ARGV[0] eq "config") {
+    print "graph_title Apache activity\n";
+    print "graph_args --base 1000 -l 0\n";
+    print "graph_category apache\n";
+    print "graph_vlabel processes\n";
+    foreach my $port (@PORTS) {
+	while (my ($char, $val) = each (%chars)) {
+	    $char =~ s/\\\./dot/;
+            $char =~ s/\\\_/underline/;
+            print "activity_${port}_${char}.label ";
+	    print $val, "\n";
+            print "activity_${port}_${char}.type GAUGE\n";
+        }
+    }    
+    exit 0;
+}
+
+foreach my $port (@PORTS) {
+    my $ua = LWP::UserAgent->new (timeout => 30);
+    my $url = sprintf $URL, $port;
+    my $response = $ua->request (HTTP::Request->new('GET',$url));
+    if ($response->content =~ /^Scoreboard\:\s?(.*)$/sm) {
+	my $string = $1;
+	chomp $string;
+	my @act = split (//, $string);
+	foreach my $char (keys (%chars)) {
+	    my $num = scalar (grep (/$char/, @act));
+	    $char =~ s/\\\./dot/;
+	    $char =~ s/\\\_/underline/;
+	    print "activity_${port}_${char}.value $num\n";
+	}
+    }
+}
+
+
diff --git a/files/scripts/OpenBSD/bin/apache_logrotate.sh b/files/scripts/OpenBSD/bin/apache_logrotate.sh
new file mode 100644
index 00000000..c2fcad97
--- /dev/null
+++ b/files/scripts/OpenBSD/bin/apache_logrotate.sh
@@ -0,0 +1,7 @@
+#!/bin/sh
+WEBROOT="/var/www/htdocs"
+#PIDFILE="/var/www/logs/httpd.pid"
+echo "#Autogenrated newsyslog.conf\n# logfile_name          owner:group     mode count size when  flags"
+find /var/www/logs -name '*_log' -exec perl -e 'print "\n{}\twww:www\t644\t30\t*\t\$D0\tZ" ' \;
+find $WEBROOT -name '*_log' -exec perl -e 'print "\n{}\twww:www\t644\t30\t*\t\$D0\tZ" ' \;
+perl -e 'print "\t\t \"/bin/sh /opt/bin/restart_apache.sh\"";'
diff --git a/files/scripts/OpenBSD/bin/restart_apache.sh b/files/scripts/OpenBSD/bin/restart_apache.sh
new file mode 100644
index 00000000..4dc936d3
--- /dev/null
+++ b/files/scripts/OpenBSD/bin/restart_apache.sh
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+ignoreout='Processing config'
+apachectl restart 2>&1 | (egrep -v -e "_default_ VirtualHost overlap on port 443" -e "$ignoreout" -e "/usr/sbin/apachectl restart: httpd restarted" || true )
+sleep 10
+apachectl start 2>&1 | (egrep -v -e "_default_ VirtualHost overlap on port 443" -e "$ignoreout" -e "/usr/sbin/apachectl startssl: httpd started" || true )
diff --git a/files/scripts/OpenBSD/bin/restart_apache_ssl.sh b/files/scripts/OpenBSD/bin/restart_apache_ssl.sh
new file mode 100644
index 00000000..314018b6
--- /dev/null
+++ b/files/scripts/OpenBSD/bin/restart_apache_ssl.sh
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+ignoreout='Processing config'
+apachectl restart 2>&1 | (egrep -v -e "_default_ VirtualHost overlap on port 443" -e "$ignoreout" -e "/usr/sbin/apachectl restart: httpd restarted" || true )
+sleep 10
+apachectl startssl 2>&1 | (egrep -v -e "_default_ VirtualHost overlap on port 443" -e "$ignoreout" -e "/usr/sbin/apachectl startssl: httpd started" || true )
diff --git a/files/service/CentOS/httpd b/files/service/CentOS/httpd
new file mode 100644
index 00000000..7102c611
--- /dev/null
+++ b/files/service/CentOS/httpd
@@ -0,0 +1,22 @@
+# Configuration file for the httpd service.
+
+#
+# The default processing model (MPM) is the process-based
+# 'prefork' model.  A thread-based model, 'worker', is also
+# available, but does not work with some modules (such as PHP).
+# The service must be stopped before changing this variable.
+#
+#HTTPD=/usr/sbin/httpd.worker
+
+#
+# To pass additional options (for instance, -D definitions) to the
+# httpd binary at startup, set OPTIONS here.
+#
+#OPTIONS=
+
+#
+# By default, the httpd process is started in the C locale; to 
+# change the locale in which the server runs, the HTTPD_LANG
+# variable can be set.
+#
+#HTTPD_LANG=C
diff --git a/files/service/CentOS/httpd.itk b/files/service/CentOS/httpd.itk
new file mode 100644
index 00000000..62a2d24f
--- /dev/null
+++ b/files/service/CentOS/httpd.itk
@@ -0,0 +1,23 @@
+# Configuration file for the httpd service.
+
+#
+# The default processing model (MPM) is the process-based
+# 'prefork' model.  A thread-based model, 'worker', is also
+# available, but does not work with some modules (such as PHP).
+# The service must be stopped before changing this variable.
+#
+#HTTPD=/usr/sbin/httpd.worker
+HTTPD=/usr/sbin/httpd.itk
+
+#
+# To pass additional options (for instance, -D definitions) to the
+# httpd binary at startup, set OPTIONS here.
+#
+#OPTIONS=
+
+#
+# By default, the httpd process is started in the C locale; to 
+# change the locale in which the server runs, the HTTPD_LANG
+# variable can be set.
+#
+#HTTPD_LANG=C
diff --git a/files/service/CentOS/httpd.itk_plus b/files/service/CentOS/httpd.itk_plus
new file mode 100644
index 00000000..4d74de2c
--- /dev/null
+++ b/files/service/CentOS/httpd.itk_plus
@@ -0,0 +1,24 @@
+# Configuration file for the httpd service.
+
+#
+# The default processing model (MPM) is the process-based
+# 'prefork' model.  A thread-based model, 'worker', is also
+# available, but does not work with some modules (such as PHP).
+# The service must be stopped before changing this variable.
+#
+#HTTPD=/usr/sbin/httpd.worker
+HTTPD=/usr/sbin/httpd
+HTTPD_LOCAL=/usr/sbin/httpd.itk
+
+#
+# To pass additional options (for instance, -D definitions) to the
+# httpd binary at startup, set OPTIONS here.
+#
+#OPTIONS=
+
+#
+# By default, the httpd process is started in the C locale; to 
+# change the locale in which the server runs, the HTTPD_LANG
+# variable can be set.
+#
+#HTTPD_LANG=C
diff --git a/files/service/CentOS/httpd.worker b/files/service/CentOS/httpd.worker
new file mode 100644
index 00000000..290923f5
--- /dev/null
+++ b/files/service/CentOS/httpd.worker
@@ -0,0 +1,22 @@
+# Configuration file for the httpd service.
+
+#
+# The default processing model (MPM) is the process-based
+# 'prefork' model.  A thread-based model, 'worker', is also
+# available, but does not work with some modules (such as PHP).
+# The service must be stopped before changing this variable.
+#
+HTTPD=/usr/sbin/httpd.worker
+
+#
+# To pass additional options (for instance, -D definitions) to the
+# httpd binary at startup, set OPTIONS here.
+#
+#OPTIONS=
+
+#
+# By default, the httpd process is started in the C locale; to 
+# change the locale in which the server runs, the HTTPD_LANG
+# variable can be set.
+#
+#HTTPD_LANG=C
diff --git a/files/vhosts.d/CentOS/0-default.conf b/files/vhosts.d/CentOS/0-default.conf
new file mode 100644
index 00000000..a8a84813
--- /dev/null
+++ b/files/vhosts.d/CentOS/0-default.conf
@@ -0,0 +1,11 @@
+############################################################
+### This file is managed by PUPPET!                     ####
+### Only modify in repo or you will loose the changes!  ####
+############################################################
+
+<VirtualHost *:80>
+    Include include.d/defaults.inc
+    DocumentRoot /var/www/html
+</VirtualHost>
+
+# vim: ts=4 filetype=apache
diff --git a/files/vhosts.d/Debian/0-default.conf b/files/vhosts.d/Debian/0-default.conf
new file mode 100644
index 00000000..2cbd90fe
--- /dev/null
+++ b/files/vhosts.d/Debian/0-default.conf
@@ -0,0 +1,41 @@
+<VirtualHost *:80>
+	ServerAdmin webmaster@localhost
+	
+	DocumentRoot /var/www/
+	<Directory />
+		Options FollowSymLinks
+		AllowOverride None
+	</Directory>
+	<Directory /var/www/>
+		Options Indexes FollowSymLinks MultiViews
+		AllowOverride None
+		Order allow,deny
+		allow from all
+	</Directory>
+
+	ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
+	<Directory "/usr/lib/cgi-bin">
+		AllowOverride None
+		Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
+		Order allow,deny
+		Allow from all
+	</Directory>
+
+	ErrorLog /var/log/apache2/error.log
+
+	# Possible values include: debug, info, notice, warn, error, crit,
+	# alert, emerg.
+	LogLevel warn
+
+	CustomLog /var/log/apache2/access.log combined
+
+    Alias /doc/ "/usr/share/doc/"
+    <Directory "/usr/share/doc/">
+        Options Indexes MultiViews FollowSymLinks
+        AllowOverride None
+        Order deny,allow
+        Deny from all
+        Allow from 127.0.0.0/255.0.0.0 ::1/128
+    </Directory>
+
+</VirtualHost>
diff --git a/files/vhosts.d/Gentoo/0-default.conf b/files/vhosts.d/Gentoo/0-default.conf
new file mode 100644
index 00000000..03468459
--- /dev/null
+++ b/files/vhosts.d/Gentoo/0-default.conf
@@ -0,0 +1,51 @@
+# ###########################################################
+# ### this file is managed by PUPPET                     ####
+# ### only modify in svn or you will loose the changes ! ####
+# ###########################################################
+# Virtual Hosts
+#
+# If you want to maintain multiple domains/hostnames on your
+# machine you can setup VirtualHost containers for them. Most configurations
+# use only name-based virtual hosts so the server doesn't need to worry about
+# IP addresses. This is indicated by the asterisks in the directives below.
+#
+# Please see the documentation at
+# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
+# for further details before you try to setup virtual hosts.
+#
+# You may use the command line option '-S' to verify your virtual host
+# configuration.
+
+<IfDefine DEFAULT_VHOST>
+# see bug #178966 why this is in here
+
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, instead of the default. See also the <VirtualHost>
+# directive.
+#
+# Change this to Listen on specific IP addresses as shown below to
+# prevent Apache from glomming onto all bound IP addresses.
+#
+#Listen 12.34.56.78:80
+Listen 80
+
+# Use name-based virtual hosting.
+NameVirtualHost *:80
+
+# When virtual hosts are enabled, the main host defined in the default
+# httpd.conf configuration will go away. We redefine it here so that it is
+# still available.
+#
+# If you disable this vhost by removing -D DEFAULT_VHOST from
+# /etc/conf.d/apache2, the first defined virtual host elsewhere will be
+# the default.
+<VirtualHost *:80>
+	Include /etc/apache2/vhosts.d/default_vhost.include
+
+	<IfModule mpm_peruser_module>
+		ServerEnvironment apache apache
+	</IfModule>
+</VirtualHost>
+</IfDefine>
+
+# vim: ts=4 filetype=apache
diff --git a/files/vhosts.d/Gentoo/default_vhost.include b/files/vhosts.d/Gentoo/default_vhost.include
new file mode 100644
index 00000000..590c1848
--- /dev/null
+++ b/files/vhosts.d/Gentoo/default_vhost.include
@@ -0,0 +1,79 @@
+# ###########################################################
+# # copyleft 2008 immerda.ch
+# ###########################################################
+# ### this file is managed by PUPPET                     ####
+# ### only modify in svn or you will loose the changes ! ####
+# ###########################################################
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed.  This address appears on some server-generated pages, such
+# as error documents.  e.g. admin@your-domain.com
+ServerAdmin root@localhost
+
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+# If you change this to something that isn't under /var/www then suexec
+# will no longer work.
+DocumentRoot "/var/www/localhost/htdocs"
+
+# This should be changed to whatever you set DocumentRoot to.
+<Directory "/var/www/localhost/htdocs">
+	# Possible values for the Options directive are "None", "All",
+	# or any combination of:
+	#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
+	#
+	# Note that "MultiViews" must be named *explicitly* --- "Options All"
+	# doesn't give it to you.
+	#
+	# The Options directive is both complicated and important.  Please see
+	# http://httpd.apache.org/docs/2.2/mod/core.html#options
+	# for more information.
+	Options Indexes FollowSymLinks
+
+	# AllowOverride controls what directives may be placed in .htaccess files.
+	# It can be "All", "None", or any combination of the keywords:
+	#   Options FileInfo AuthConfig Limit
+	AllowOverride All
+
+	# Controls who can get stuff from this server.
+	Order allow,deny
+	Allow from all
+</Directory>
+
+<IfModule alias_module>
+	# Redirect: Allows you to tell clients about documents that used to
+	# exist in your server's namespace, but do not anymore. The client
+	# will make a new request for the document at its new location.
+	# Example:
+	#   Redirect permanent /foo http://www.example.com/bar
+
+	# Alias: Maps web paths into filesystem paths and is used to
+	# access content that does not live under the DocumentRoot.
+	# Example:
+	#   Alias /webpath /full/filesystem/path
+	#
+	# If you include a trailing / on /webpath then the server will
+	# require it to be present in the URL.  You will also likely
+	# need to provide a <Directory> section to allow access to
+	# the filesystem path.
+
+	# ScriptAlias: This controls which directories contain server scripts.
+	# ScriptAliases are essentially the same as Aliases, except that
+	# documents in the target directory are treated as applications and
+	# run by the server when requested rather than as documents sent to the
+	# client.  The same rules about trailing "/" apply to ScriptAlias
+	# directives as to Alias.
+	ScriptAlias /cgi-bin/ "/var/www/localhost/cgi-bin/"
+</IfModule>
+
+# "/var/www/localhost/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+<Directory "/var/www/localhost/cgi-bin">
+	AllowOverride None
+	Options None
+	Order allow,deny
+	Allow from all
+</Directory>
+
+# vim: ts=4 filetype=apache
diff --git a/files/vhosts.d/OpenBSD/0-default.conf b/files/vhosts.d/OpenBSD/0-default.conf
new file mode 100644
index 00000000..9c4aa9d5
--- /dev/null
+++ b/files/vhosts.d/OpenBSD/0-default.conf
@@ -0,0 +1,8 @@
+<VirtualHost *:80>
+    Include include.d/defaults.inc
+
+    DocumentRoot /var/www/htdocs/default/www/
+    ErrorLog /var/www/htdocs/default/logs/default_error_log
+    CustomLog /var/www/htdocs/default/logs/default_access_log combined
+</VirtualHost>
+