From 3e4d8f433239c40311037616b1b8833a06651ae0 Mon Sep 17 00:00:00 2001 From: Arne Schwabe Date: Mon, 16 Apr 2012 19:21:14 +0200 Subject: Initial import --- openssl/crypto/rc4/asm/rc4-586.pl | 270 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 270 insertions(+) create mode 100644 openssl/crypto/rc4/asm/rc4-586.pl (limited to 'openssl/crypto/rc4/asm/rc4-586.pl') diff --git a/openssl/crypto/rc4/asm/rc4-586.pl b/openssl/crypto/rc4/asm/rc4-586.pl new file mode 100644 index 00000000..38a44a70 --- /dev/null +++ b/openssl/crypto/rc4/asm/rc4-586.pl @@ -0,0 +1,270 @@ +#!/usr/bin/env perl + +# ==================================================================== +# [Re]written by Andy Polyakov for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# At some point it became apparent that the original SSLeay RC4 +# assembler implementation performs suboptimally on latest IA-32 +# microarchitectures. After re-tuning performance has changed as +# following: +# +# Pentium -10% +# Pentium III +12% +# AMD +50%(*) +# P4 +250%(**) +# +# (*) This number is actually a trade-off:-) It's possible to +# achieve +72%, but at the cost of -48% off PIII performance. +# In other words code performing further 13% faster on AMD +# would perform almost 2 times slower on Intel PIII... +# For reference! This code delivers ~80% of rc4-amd64.pl +# performance on the same Opteron machine. +# (**) This number requires compressed key schedule set up by +# RC4_set_key [see commentary below for further details]. +# +# + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +push(@INC,"${dir}","${dir}../../perlasm"); +require "x86asm.pl"; + +&asm_init($ARGV[0],"rc4-586.pl"); + +$xx="eax"; +$yy="ebx"; +$tx="ecx"; +$ty="edx"; +$inp="esi"; +$out="ebp"; +$dat="edi"; + +sub RC4_loop { + my $i=shift; + my $func = ($i==0)?*mov:*or; + + &add (&LB($yy),&LB($tx)); + &mov ($ty,&DWP(0,$dat,$yy,4)); + &mov (&DWP(0,$dat,$yy,4),$tx); + &mov (&DWP(0,$dat,$xx,4),$ty); + &add ($ty,$tx); + &inc (&LB($xx)); + &and ($ty,0xff); + &ror ($out,8) if ($i!=0); + if ($i<3) { + &mov ($tx,&DWP(0,$dat,$xx,4)); + } else { + &mov ($tx,&wparam(3)); # reload [re-biased] out + } + &$func ($out,&DWP(0,$dat,$ty,4)); +} + +# void RC4(RC4_KEY *key,size_t len,const unsigned char *inp,unsigned char *out); +&function_begin("RC4"); + &mov ($dat,&wparam(0)); # load key schedule pointer + &mov ($ty, &wparam(1)); # load len + &mov ($inp,&wparam(2)); # load inp + &mov ($out,&wparam(3)); # load out + + &xor ($xx,$xx); # avoid partial register stalls + &xor ($yy,$yy); + + &cmp ($ty,0); # safety net + &je (&label("abort")); + + &mov (&LB($xx),&BP(0,$dat)); # load key->x + &mov (&LB($yy),&BP(4,$dat)); # load key->y + &add ($dat,8); + + &lea ($tx,&DWP(0,$inp,$ty)); + &sub ($out,$inp); # re-bias out + &mov (&wparam(1),$tx); # save input+len + + &inc (&LB($xx)); + + # detect compressed key schedule... + &cmp (&DWP(256,$dat),-1); + &je (&label("RC4_CHAR")); + + &mov ($tx,&DWP(0,$dat,$xx,4)); + + &and ($ty,-4); # how many 4-byte chunks? + &jz (&label("loop1")); + + &lea ($ty,&DWP(-4,$inp,$ty)); + &mov (&wparam(2),$ty); # save input+(len/4)*4-4 + &mov (&wparam(3),$out); # $out as accumulator in this loop + + &set_label("loop4",16); + for ($i=0;$i<4;$i++) { RC4_loop($i); } + &ror ($out,8); + &xor ($out,&DWP(0,$inp)); + &cmp ($inp,&wparam(2)); # compare to input+(len/4)*4-4 + &mov (&DWP(0,$tx,$inp),$out);# $tx holds re-biased out here + &lea ($inp,&DWP(4,$inp)); + &mov ($tx,&DWP(0,$dat,$xx,4)); + &jb (&label("loop4")); + + &cmp ($inp,&wparam(1)); # compare to input+len + &je (&label("done")); + &mov ($out,&wparam(3)); # restore $out + + &set_label("loop1",16); + &add (&LB($yy),&LB($tx)); + &mov ($ty,&DWP(0,$dat,$yy,4)); + &mov (&DWP(0,$dat,$yy,4),$tx); + &mov (&DWP(0,$dat,$xx,4),$ty); + &add ($ty,$tx); + &inc (&LB($xx)); + &and ($ty,0xff); + &mov ($ty,&DWP(0,$dat,$ty,4)); + &xor (&LB($ty),&BP(0,$inp)); + &lea ($inp,&DWP(1,$inp)); + &mov ($tx,&DWP(0,$dat,$xx,4)); + &cmp ($inp,&wparam(1)); # compare to input+len + &mov (&BP(-1,$out,$inp),&LB($ty)); + &jb (&label("loop1")); + + &jmp (&label("done")); + +# this is essentially Intel P4 specific codepath... +&set_label("RC4_CHAR",16); + &movz ($tx,&BP(0,$dat,$xx)); + # strangely enough unrolled loop performs over 20% slower... + &set_label("cloop1"); + &add (&LB($yy),&LB($tx)); + &movz ($ty,&BP(0,$dat,$yy)); + &mov (&BP(0,$dat,$yy),&LB($tx)); + &mov (&BP(0,$dat,$xx),&LB($ty)); + &add (&LB($ty),&LB($tx)); + &movz ($ty,&BP(0,$dat,$ty)); + &add (&LB($xx),1); + &xor (&LB($ty),&BP(0,$inp)); + &lea ($inp,&DWP(1,$inp)); + &movz ($tx,&BP(0,$dat,$xx)); + &cmp ($inp,&wparam(1)); + &mov (&BP(-1,$out,$inp),&LB($ty)); + &jb (&label("cloop1")); + +&set_label("done"); + &dec (&LB($xx)); + &mov (&BP(-4,$dat),&LB($yy)); # save key->y + &mov (&BP(-8,$dat),&LB($xx)); # save key->x +&set_label("abort"); +&function_end("RC4"); + +######################################################################## + +$inp="esi"; +$out="edi"; +$idi="ebp"; +$ido="ecx"; +$idx="edx"; + +&external_label("OPENSSL_ia32cap_P"); + +# void RC4_set_key(RC4_KEY *key,int len,const unsigned char *data); +&function_begin("RC4_set_key"); + &mov ($out,&wparam(0)); # load key + &mov ($idi,&wparam(1)); # load len + &mov ($inp,&wparam(2)); # load data + &picmeup($idx,"OPENSSL_ia32cap_P"); + + &lea ($out,&DWP(2*4,$out)); # &key->data + &lea ($inp,&DWP(0,$inp,$idi)); # $inp to point at the end + &neg ($idi); + &xor ("eax","eax"); + &mov (&DWP(-4,$out),$idi); # borrow key->y + + &bt (&DWP(0,$idx),20); # check for bit#20 + &jc (&label("c1stloop")); + +&set_label("w1stloop",16); + &mov (&DWP(0,$out,"eax",4),"eax"); # key->data[i]=i; + &add (&LB("eax"),1); # i++; + &jnc (&label("w1stloop")); + + &xor ($ido,$ido); + &xor ($idx,$idx); + +&set_label("w2ndloop",16); + &mov ("eax",&DWP(0,$out,$ido,4)); + &add (&LB($idx),&BP(0,$inp,$idi)); + &add (&LB($idx),&LB("eax")); + &add ($idi,1); + &mov ("ebx",&DWP(0,$out,$idx,4)); + &jnz (&label("wnowrap")); + &mov ($idi,&DWP(-4,$out)); + &set_label("wnowrap"); + &mov (&DWP(0,$out,$idx,4),"eax"); + &mov (&DWP(0,$out,$ido,4),"ebx"); + &add (&LB($ido),1); + &jnc (&label("w2ndloop")); +&jmp (&label("exit")); + +# Unlike all other x86 [and x86_64] implementations, Intel P4 core +# [including EM64T] was found to perform poorly with above "32-bit" key +# schedule, a.k.a. RC4_INT. Performance improvement for IA-32 hand-coded +# assembler turned out to be 3.5x if re-coded for compressed 8-bit one, +# a.k.a. RC4_CHAR! It's however inappropriate to just switch to 8-bit +# schedule for x86[_64], because non-P4 implementations suffer from +# significant performance losses then, e.g. PIII exhibits >2x +# deterioration, and so does Opteron. In order to assure optimal +# all-round performance, we detect P4 at run-time and set up compressed +# key schedule, which is recognized by RC4 procedure. + +&set_label("c1stloop",16); + &mov (&BP(0,$out,"eax"),&LB("eax")); # key->data[i]=i; + &add (&LB("eax"),1); # i++; + &jnc (&label("c1stloop")); + + &xor ($ido,$ido); + &xor ($idx,$idx); + &xor ("ebx","ebx"); + +&set_label("c2ndloop",16); + &mov (&LB("eax"),&BP(0,$out,$ido)); + &add (&LB($idx),&BP(0,$inp,$idi)); + &add (&LB($idx),&LB("eax")); + &add ($idi,1); + &mov (&LB("ebx"),&BP(0,$out,$idx)); + &jnz (&label("cnowrap")); + &mov ($idi,&DWP(-4,$out)); + &set_label("cnowrap"); + &mov (&BP(0,$out,$idx),&LB("eax")); + &mov (&BP(0,$out,$ido),&LB("ebx")); + &add (&LB($ido),1); + &jnc (&label("c2ndloop")); + + &mov (&DWP(256,$out),-1); # mark schedule as compressed + +&set_label("exit"); + &xor ("eax","eax"); + &mov (&DWP(-8,$out),"eax"); # key->x=0; + &mov (&DWP(-4,$out),"eax"); # key->y=0; +&function_end("RC4_set_key"); + +# const char *RC4_options(void); +&function_begin_B("RC4_options"); + &call (&label("pic_point")); +&set_label("pic_point"); + &blindpop("eax"); + &lea ("eax",&DWP(&label("opts")."-".&label("pic_point"),"eax")); + &picmeup("edx","OPENSSL_ia32cap_P"); + &bt (&DWP(0,"edx"),20); + &jnc (&label("skip")); + &add ("eax",12); + &set_label("skip"); + &ret (); +&set_label("opts",64); +&asciz ("rc4(4x,int)"); +&asciz ("rc4(1x,char)"); +&asciz ("RC4 for x86, CRYPTOGAMS by "); +&align (64); +&function_end_B("RC4_options"); + +&asm_finish(); + -- cgit v1.2.3