diff options
Diffstat (limited to 'openssl/crypto/sha/asm/sha512-x86_64.pl')
| -rwxr-xr-x | openssl/crypto/sha/asm/sha512-x86_64.pl | 456 |
1 files changed, 0 insertions, 456 deletions
diff --git a/openssl/crypto/sha/asm/sha512-x86_64.pl b/openssl/crypto/sha/asm/sha512-x86_64.pl deleted file mode 100755 index e6643f8c..00000000 --- a/openssl/crypto/sha/asm/sha512-x86_64.pl +++ /dev/null @@ -1,456 +0,0 @@ -#!/usr/bin/env perl -# -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. Rights for redistribution and usage in source and binary -# forms are granted according to the OpenSSL license. -# ==================================================================== -# -# sha256/512_block procedure for x86_64. -# -# 40% improvement over compiler-generated code on Opteron. On EM64T -# sha256 was observed to run >80% faster and sha512 - >40%. No magical -# tricks, just straight implementation... I really wonder why gcc -# [being armed with inline assembler] fails to generate as fast code. -# The only thing which is cool about this module is that it's very -# same instruction sequence used for both SHA-256 and SHA-512. In -# former case the instructions operate on 32-bit operands, while in -# latter - on 64-bit ones. All I had to do is to get one flavor right, -# the other one passed the test right away:-) -# -# sha256_block runs in ~1005 cycles on Opteron, which gives you -# asymptotic performance of 64*1000/1005=63.7MBps times CPU clock -# frequency in GHz. sha512_block runs in ~1275 cycles, which results -# in 128*1000/1275=100MBps per GHz. Is there room for improvement? -# Well, if you compare it to IA-64 implementation, which maintains -# X[16] in register bank[!], tends to 4 instructions per CPU clock -# cycle and runs in 1003 cycles, 1275 is very good result for 3-way -# issue Opteron pipeline and X[16] maintained in memory. So that *if* -# there is a way to improve it, *then* the only way would be to try to -# offload X[16] updates to SSE unit, but that would require "deeper" -# loop unroll, which in turn would naturally cause size blow-up, not -# to mention increased complexity! And once again, only *if* it's -# actually possible to noticeably improve overall ILP, instruction -# level parallelism, on a given CPU implementation in this case. -# -# Special note on Intel EM64T. While Opteron CPU exhibits perfect -# perfromance ratio of 1.5 between 64- and 32-bit flavors [see above], -# [currently available] EM64T CPUs apparently are far from it. On the -# contrary, 64-bit version, sha512_block, is ~30% *slower* than 32-bit -# sha256_block:-( This is presumably because 64-bit shifts/rotates -# apparently are not atomic instructions, but implemented in microcode. - -$flavour = shift; -$output = shift; -if ($flavour =~ /\./) { $output = $flavour; undef $flavour; } - -$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/); - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or -( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or -die "can't locate x86_64-xlate.pl"; - -open STDOUT,"| $^X $xlate $flavour $output"; - -if ($output =~ /512/) { - $func="sha512_block_data_order"; - $TABLE="K512"; - $SZ=8; - @ROT=($A,$B,$C,$D,$E,$F,$G,$H)=("%rax","%rbx","%rcx","%rdx", - "%r8", "%r9", "%r10","%r11"); - ($T1,$a0,$a1,$a2)=("%r12","%r13","%r14","%r15"); - @Sigma0=(28,34,39); - @Sigma1=(14,18,41); - @sigma0=(1, 8, 7); - @sigma1=(19,61, 6); - $rounds=80; -} else { - $func="sha256_block_data_order"; - $TABLE="K256"; - $SZ=4; - @ROT=($A,$B,$C,$D,$E,$F,$G,$H)=("%eax","%ebx","%ecx","%edx", - "%r8d","%r9d","%r10d","%r11d"); - ($T1,$a0,$a1,$a2)=("%r12d","%r13d","%r14d","%r15d"); - @Sigma0=( 2,13,22); - @Sigma1=( 6,11,25); - @sigma0=( 7,18, 3); - @sigma1=(17,19,10); - $rounds=64; -} - -$ctx="%rdi"; # 1st arg -$round="%rdi"; # zaps $ctx -$inp="%rsi"; # 2nd arg -$Tbl="%rbp"; - -$_ctx="16*$SZ+0*8(%rsp)"; -$_inp="16*$SZ+1*8(%rsp)"; -$_end="16*$SZ+2*8(%rsp)"; -$_rsp="16*$SZ+3*8(%rsp)"; -$framesz="16*$SZ+4*8"; - - -sub ROUND_00_15() -{ my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; - -$code.=<<___; - mov $e,$a0 - mov $e,$a1 - mov $f,$a2 - - ror \$$Sigma1[0],$a0 - ror \$$Sigma1[1],$a1 - xor $g,$a2 # f^g - - xor $a1,$a0 - ror \$`$Sigma1[2]-$Sigma1[1]`,$a1 - and $e,$a2 # (f^g)&e - mov $T1,`$SZ*($i&0xf)`(%rsp) - - xor $a1,$a0 # Sigma1(e) - xor $g,$a2 # Ch(e,f,g)=((f^g)&e)^g - add $h,$T1 # T1+=h - - mov $a,$h - add $a0,$T1 # T1+=Sigma1(e) - - add $a2,$T1 # T1+=Ch(e,f,g) - mov $a,$a0 - mov $a,$a1 - - ror \$$Sigma0[0],$h - ror \$$Sigma0[1],$a0 - mov $a,$a2 - add ($Tbl,$round,$SZ),$T1 # T1+=K[round] - - xor $a0,$h - ror \$`$Sigma0[2]-$Sigma0[1]`,$a0 - or $c,$a1 # a|c - - xor $a0,$h # h=Sigma0(a) - and $c,$a2 # a&c - add $T1,$d # d+=T1 - - and $b,$a1 # (a|c)&b - add $T1,$h # h+=T1 - - or $a2,$a1 # Maj(a,b,c)=((a|c)&b)|(a&c) - lea 1($round),$round # round++ - - add $a1,$h # h+=Maj(a,b,c) -___ -} - -sub ROUND_16_XX() -{ my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; - -$code.=<<___; - mov `$SZ*(($i+1)&0xf)`(%rsp),$a0 - mov `$SZ*(($i+14)&0xf)`(%rsp),$T1 - - mov $a0,$a2 - - shr \$$sigma0[2],$a0 - ror \$$sigma0[0],$a2 - - xor $a2,$a0 - ror \$`$sigma0[1]-$sigma0[0]`,$a2 - - xor $a2,$a0 # sigma0(X[(i+1)&0xf]) - mov $T1,$a1 - - shr \$$sigma1[2],$T1 - ror \$$sigma1[0],$a1 - - xor $a1,$T1 - ror \$`$sigma1[1]-$sigma1[0]`,$a1 - - xor $a1,$T1 # sigma1(X[(i+14)&0xf]) - - add $a0,$T1 - - add `$SZ*(($i+9)&0xf)`(%rsp),$T1 - - add `$SZ*($i&0xf)`(%rsp),$T1 -___ - &ROUND_00_15(@_); -} - -$code=<<___; -.text - -.globl $func -.type $func,\@function,4 -.align 16 -$func: - push %rbx - push %rbp - push %r12 - push %r13 - push %r14 - push %r15 - mov %rsp,%r11 # copy %rsp - shl \$4,%rdx # num*16 - sub \$$framesz,%rsp - lea ($inp,%rdx,$SZ),%rdx # inp+num*16*$SZ - and \$-64,%rsp # align stack frame - mov $ctx,$_ctx # save ctx, 1st arg - mov $inp,$_inp # save inp, 2nd arh - mov %rdx,$_end # save end pointer, "3rd" arg - mov %r11,$_rsp # save copy of %rsp -.Lprologue: - - lea $TABLE(%rip),$Tbl - - mov $SZ*0($ctx),$A - mov $SZ*1($ctx),$B - mov $SZ*2($ctx),$C - mov $SZ*3($ctx),$D - mov $SZ*4($ctx),$E - mov $SZ*5($ctx),$F - mov $SZ*6($ctx),$G - mov $SZ*7($ctx),$H - jmp .Lloop - -.align 16 -.Lloop: - xor $round,$round -___ - for($i=0;$i<16;$i++) { - $code.=" mov $SZ*$i($inp),$T1\n"; - $code.=" bswap $T1\n"; - &ROUND_00_15($i,@ROT); - unshift(@ROT,pop(@ROT)); - } -$code.=<<___; - jmp .Lrounds_16_xx -.align 16 -.Lrounds_16_xx: -___ - for(;$i<32;$i++) { - &ROUND_16_XX($i,@ROT); - unshift(@ROT,pop(@ROT)); - } - -$code.=<<___; - cmp \$$rounds,$round - jb .Lrounds_16_xx - - mov $_ctx,$ctx - lea 16*$SZ($inp),$inp - - add $SZ*0($ctx),$A - add $SZ*1($ctx),$B - add $SZ*2($ctx),$C - add $SZ*3($ctx),$D - add $SZ*4($ctx),$E - add $SZ*5($ctx),$F - add $SZ*6($ctx),$G - add $SZ*7($ctx),$H - - cmp $_end,$inp - - mov $A,$SZ*0($ctx) - mov $B,$SZ*1($ctx) - mov $C,$SZ*2($ctx) - mov $D,$SZ*3($ctx) - mov $E,$SZ*4($ctx) - mov $F,$SZ*5($ctx) - mov $G,$SZ*6($ctx) - mov $H,$SZ*7($ctx) - jb .Lloop - - mov $_rsp,%rsi - mov (%rsi),%r15 - mov 8(%rsi),%r14 - mov 16(%rsi),%r13 - mov 24(%rsi),%r12 - mov 32(%rsi),%rbp - mov 40(%rsi),%rbx - lea 48(%rsi),%rsp -.Lepilogue: - ret -.size $func,.-$func -___ - -if ($SZ==4) { -$code.=<<___; -.align 64 -.type $TABLE,\@object -$TABLE: - .long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 - .long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 - .long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 - .long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 - .long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc - .long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da - .long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 - .long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 - .long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 - .long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 - .long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 - .long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 - .long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 - .long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 - .long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 - .long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 -___ -} else { -$code.=<<___; -.align 64 -.type $TABLE,\@object -$TABLE: - .quad 0x428a2f98d728ae22,0x7137449123ef65cd - .quad 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc - .quad 0x3956c25bf348b538,0x59f111f1b605d019 - .quad 0x923f82a4af194f9b,0xab1c5ed5da6d8118 - .quad 0xd807aa98a3030242,0x12835b0145706fbe - .quad 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2 - .quad 0x72be5d74f27b896f,0x80deb1fe3b1696b1 - .quad 0x9bdc06a725c71235,0xc19bf174cf692694 - .quad 0xe49b69c19ef14ad2,0xefbe4786384f25e3 - .quad 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65 - .quad 0x2de92c6f592b0275,0x4a7484aa6ea6e483 - .quad 0x5cb0a9dcbd41fbd4,0x76f988da831153b5 - .quad 0x983e5152ee66dfab,0xa831c66d2db43210 - .quad 0xb00327c898fb213f,0xbf597fc7beef0ee4 - .quad 0xc6e00bf33da88fc2,0xd5a79147930aa725 - .quad 0x06ca6351e003826f,0x142929670a0e6e70 - .quad 0x27b70a8546d22ffc,0x2e1b21385c26c926 - .quad 0x4d2c6dfc5ac42aed,0x53380d139d95b3df - .quad 0x650a73548baf63de,0x766a0abb3c77b2a8 - .quad 0x81c2c92e47edaee6,0x92722c851482353b - .quad 0xa2bfe8a14cf10364,0xa81a664bbc423001 - .quad 0xc24b8b70d0f89791,0xc76c51a30654be30 - .quad 0xd192e819d6ef5218,0xd69906245565a910 - .quad 0xf40e35855771202a,0x106aa07032bbd1b8 - .quad 0x19a4c116b8d2d0c8,0x1e376c085141ab53 - .quad 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8 - .quad 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb - .quad 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3 - .quad 0x748f82ee5defb2fc,0x78a5636f43172f60 - .quad 0x84c87814a1f0ab72,0x8cc702081a6439ec - .quad 0x90befffa23631e28,0xa4506cebde82bde9 - .quad 0xbef9a3f7b2c67915,0xc67178f2e372532b - .quad 0xca273eceea26619c,0xd186b8c721c0c207 - .quad 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178 - .quad 0x06f067aa72176fba,0x0a637dc5a2c898a6 - .quad 0x113f9804bef90dae,0x1b710b35131c471b - .quad 0x28db77f523047d84,0x32caab7b40c72493 - .quad 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c - .quad 0x4cc5d4becb3e42b6,0x597f299cfc657e2a - .quad 0x5fcb6fab3ad6faec,0x6c44198c4a475817 -___ -} - -# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame, -# CONTEXT *context,DISPATCHER_CONTEXT *disp) -if ($win64) { -$rec="%rcx"; -$frame="%rdx"; -$context="%r8"; -$disp="%r9"; - -$code.=<<___; -.extern __imp_RtlVirtualUnwind -.type se_handler,\@abi-omnipotent -.align 16 -se_handler: - push %rsi - push %rdi - push %rbx - push %rbp - push %r12 - push %r13 - push %r14 - push %r15 - pushfq - sub \$64,%rsp - - mov 120($context),%rax # pull context->Rax - mov 248($context),%rbx # pull context->Rip - - lea .Lprologue(%rip),%r10 - cmp %r10,%rbx # context->Rip<.Lprologue - jb .Lin_prologue - - mov 152($context),%rax # pull context->Rsp - - lea .Lepilogue(%rip),%r10 - cmp %r10,%rbx # context->Rip>=.Lepilogue - jae .Lin_prologue - - mov 16*$SZ+3*8(%rax),%rax # pull $_rsp - lea 48(%rax),%rax - - mov -8(%rax),%rbx - mov -16(%rax),%rbp - mov -24(%rax),%r12 - mov -32(%rax),%r13 - mov -40(%rax),%r14 - mov -48(%rax),%r15 - mov %rbx,144($context) # restore context->Rbx - mov %rbp,160($context) # restore context->Rbp - mov %r12,216($context) # restore context->R12 - mov %r13,224($context) # restore context->R13 - mov %r14,232($context) # restore context->R14 - mov %r15,240($context) # restore context->R15 - -.Lin_prologue: - mov 8(%rax),%rdi - mov 16(%rax),%rsi - mov %rax,152($context) # restore context->Rsp - mov %rsi,168($context) # restore context->Rsi - mov %rdi,176($context) # restore context->Rdi - - mov 40($disp),%rdi # disp->ContextRecord - mov $context,%rsi # context - mov \$154,%ecx # sizeof(CONTEXT) - .long 0xa548f3fc # cld; rep movsq - - mov $disp,%rsi - xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER - mov 8(%rsi),%rdx # arg2, disp->ImageBase - mov 0(%rsi),%r8 # arg3, disp->ControlPc - mov 16(%rsi),%r9 # arg4, disp->FunctionEntry - mov 40(%rsi),%r10 # disp->ContextRecord - lea 56(%rsi),%r11 # &disp->HandlerData - lea 24(%rsi),%r12 # &disp->EstablisherFrame - mov %r10,32(%rsp) # arg5 - mov %r11,40(%rsp) # arg6 - mov %r12,48(%rsp) # arg7 - mov %rcx,56(%rsp) # arg8, (NULL) - call *__imp_RtlVirtualUnwind(%rip) - - mov \$1,%eax # ExceptionContinueSearch - add \$64,%rsp - popfq - pop %r15 - pop %r14 - pop %r13 - pop %r12 - pop %rbp - pop %rbx - pop %rdi - pop %rsi - ret -.size se_handler,.-se_handler - -.section .pdata -.align 4 - .rva .LSEH_begin_$func - .rva .LSEH_end_$func - .rva .LSEH_info_$func - -.section .xdata -.align 8 -.LSEH_info_$func: - .byte 9,0,0,0 - .rva se_handler -___ -} - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -print $code; -close STDOUT; |