summaryrefslogtreecommitdiff
path: root/main/openvpn/tests
diff options
context:
space:
mode:
Diffstat (limited to 'main/openvpn/tests')
m---------main/openvpn0
-rw-r--r--main/openvpn/tests/Makefile.am23
-rw-r--r--main/openvpn/tests/t_client.rc-sample93
-rwxr-xr-xmain/openvpn/tests/t_client.sh.in347
-rwxr-xr-xmain/openvpn/tests/t_cltsrv-down.sh2
-rwxr-xr-xmain/openvpn/tests/t_cltsrv.sh91
-rwxr-xr-xmain/openvpn/tests/t_lpback.sh60
7 files changed, 0 insertions, 616 deletions
diff --git a/main/openvpn b/main/openvpn
new file mode 160000
+Subproject 7aaf01766f9718375986600216607aeb6397200
diff --git a/main/openvpn/tests/Makefile.am b/main/openvpn/tests/Makefile.am
deleted file mode 100644
index b7980e04..00000000
--- a/main/openvpn/tests/Makefile.am
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# OpenVPN -- An application to securely tunnel IP networks
-# over a single UDP port, with support for SSL/TLS-based
-# session authentication and key exchange,
-# packet encryption, packet authentication, and
-# packet compression.
-#
-# Copyright (C) 2002-2010 OpenVPN Technologies, Inc. <sales@openvpn.net>
-# Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com>
-#
-
-MAINTAINERCLEANFILES = \
- $(srcdir)/Makefile.in
-
-test_scripts = t_client.sh t_lpback.sh t_cltsrv.sh
-
-TESTS_ENVIRONMENT = top_srcdir="$(top_srcdir)"
-TESTS = $(test_scripts)
-
-dist_noinst_SCRIPTS = \
- $(test_scripts) \
- t_cltsrv-down.sh
-
diff --git a/main/openvpn/tests/t_client.rc-sample b/main/openvpn/tests/t_client.rc-sample
deleted file mode 100644
index 6e666077..00000000
--- a/main/openvpn/tests/t_client.rc-sample
+++ /dev/null
@@ -1,93 +0,0 @@
-#
-# this is sourced from t_client.sh and defines which openvpn client tests
-# to run
-#
-# (sample config, copy to t_client.rc and adapt to your environment)
-#
-#
-# define these - if empty, no tests will run
-#
-top_srcdir="${top_srcdir:-..}"
-CA_CERT="${top_srcdir}/sample/sample-keys/ca.crt"
-CLIENT_KEY="${top_srcdir}/sample/sample-keys/client.key"
-CLIENT_CERT="${top_srcdir}/sample/sample-keys/client.crt"
-#
-# remote host (used as macro below)
-#
-REMOTE=mytestserver
-#
-# tests to run (list suffixes for config stanzas below)
-#
-TEST_RUN_LIST="1 2"
-
-#
-# use "sudo" (etc) to give openvpn the necessary privileges
-# if this is not active, "make check" must be run as root
-#
-#RUN_SUDO=sudo
-
-#
-# base confic that is the same for all the p2mp test runs
-#
-OPENVPN_BASE_P2MP="--client --ca $CA_CERT \
- --cert $CLIENT_CERT --key $CLIENT_KEY \
- --ns-cert-type server --nobind --comp-lzo --verb 3"
-
-# base config for p2p tests
-#
-OPENVPN_BASE_P2P="..."
-
-#
-#
-# now define the individual tests - all variables suffixed with _1, _2 etc
-# will be used in test run "1", "2", etc.
-#
-# if something is not defined here, the corresponding test is not run
-#
-# possible test options:
-#
-# RUN_TITLE_x="what is being tested on here" (purely informational)
-# OPENVPN_CONF_x = "how to call ./openvpn" [mandatory]
-# EXPECT_IFCONFIG4_x = "this IPv4 address needs to show up in ifconfig"
-# EXPECT_IFCONFIG6_x = "this IPv6 address needs to show up in ifconfig"
-# PING4_HOSTS_x = "these hosts musts ping when openvpn is up (IPv4 fping)"
-# PING6_HOSTS_x = "these hosts musts ping when openvpn is up (IPv6 fping6)"
-#
-# Test 1: UDP / p2mp tun
-# specify IPv4+IPv6 addresses expected from server and ping targets
-#
-RUN_TITLE_1="testing tun/udp/ipv4+ipv6"
-OPENVPN_CONF_1="$OPENVPN_BASE_P2MP --dev tun --proto udp --remote $REMOTE --port 51194"
-EXPECT_IFCONFIG4_1="10.100.50.6"
-EXPECT_IFCONFIG6_1="2001:db8:a050::1:0"
-PING4_HOSTS_1="10.100.50.1 10.100.0.1"
-PING6_HOSTS_1="2001:db8::1 2001:db8:a050::1"
-
-# Test 2: TCP / p2mp tun
-#
-RUN_TITLE_2="testing tun/tcp/ipv4+ipv6"
-OPENVPN_CONF_2="$OPENVPN_BASE_P2MP --dev tun --proto tcp --remote $REMOTE --port 51194"
-EXPECT_IFCONFIG4_2="10.100.51.6"
-EXPECT_IFCONFIG6_2="2001:db8:a051::1:0"
-PING4_HOSTS_2="10.100.51.1 10.100.0.1"
-PING6_HOSTS_2="2001:db8::1 2001:db8:a051::1"
-
-# Test 3: UDP / p2p tun
-# ...
-
-# Test 4: TCP / p2p tun
-# ...
-
-# Test 5: UDP / p2mp tap
-# ...
-
-# Test 6: TCP / p2mp tun
-# ...
-
-# Test 7: UDP / p2p tap
-# ...
-
-# Test 8: TCP / p2p tap
-# ...
-
-# Test 9: whatever you want to test... :-)
diff --git a/main/openvpn/tests/t_client.sh.in b/main/openvpn/tests/t_client.sh.in
deleted file mode 100755
index d4f7c4ab..00000000
--- a/main/openvpn/tests/t_client.sh.in
+++ /dev/null
@@ -1,347 +0,0 @@
-#!@SHELL@
-#
-# run OpenVPN client against ``test reference'' server
-# - check that ping, http, ... via tunnel works
-# - check that interface config / routes are properly cleaned after test end
-#
-# prerequisites:
-# - openvpn binary in current directory
-# - writable current directory to create subdir for logs
-# - t_client.rc in current directory OR source dir that specifies tests
-# - for "ping4" checks: fping binary in $PATH
-# - for "ping6" checks: fping6 binary in $PATH
-#
-
-srcdir="${srcdir:-.}"
-top_builddir="${top_builddir:-..}"
-if [ -r "${top_builddir}"/t_client.rc ] ; then
- . "${top_builddir}"/t_client.rc
-elif [ -r "${srcdir}"/t_client.rc ] ; then
- . "${srcdir}"/t_client.rc
-else
- echo "$0: cannot find 't_client.rc' in build dir ('${top_builddir}')" >&2
- echo "$0: or source directory ('${srcdir}'). SKIPPING TEST." >&2
- exit 77
-fi
-
-# Check for external dependencies
-which fping > /dev/null
-if [ $? -ne 0 ]; then
- echo "$0: fping is not available in \$PATH" >&2
- exit 77
-fi
-which fping6 > /dev/null
-if [ $? -ne 0 ]; then
- echo "$0: fping6 is not available in \$PATH" >&2
- exit 77
-fi
-
-if [ ! -x "${top_builddir}/src/openvpn/openvpn" ]
-then
- echo "no (executable) openvpn binary in current build tree. FAIL." >&2
- exit 1
-fi
-
-if [ ! -w . ]
-then
- echo "current directory is not writable (required for logging). FAIL." >&2
- exit 1
-fi
-
-if [ -z "$CA_CERT" ] ; then
- echo "CA_CERT not defined in 't_client.rc'. SKIP test." >&2
- exit 77
-fi
-
-if [ -z "$TEST_RUN_LIST" ] ; then
- echo "TEST_RUN_LIST empty, no tests defined. SKIP test." >&2
- exit 77
-fi
-
-# make sure we have permissions to run ifconfig/route from OpenVPN
-# can't use "id -u" here - doesn't work on Solaris
-ID=`id`
-if expr "$ID" : "uid=0" >/dev/null
-then :
-else
- if [ -z "$RUN_SUDO" ]
- then
- echo "$0: this test must run be as root, or RUN_SUDO=... " >&2
- echo " must be set correctly in 't_client.rc'. SKIP." >&2
- exit 77
- fi
-fi
-
-LOGDIR=t_client-`hostname`-`date +%Y%m%d-%H%M%S`
-if mkdir $LOGDIR
-then :
-else
- echo "can't create log directory '$LOGDIR'. FAIL." >&2
- exit 1
-fi
-
-exit_code=0
-
-# ----------------------------------------------------------
-# helper functions
-# ----------------------------------------------------------
-# print failure message, increase FAIL counter
-fail()
-{
- echo ""
- echo "FAIL: $@" >&2
- fail_count=$(( $fail_count + 1 ))
-}
-
-# print "all interface IP addresses" + "all routes"
-# this is higly system dependent...
-get_ifconfig_route()
-{
- # linux / iproute2? (-> if configure got a path)
- if [ -n "@IPROUTE@" ]
- then
- echo "-- linux iproute2 --"
- @IPROUTE@ addr show | grep -v valid_lft
- @IPROUTE@ route show
- @IPROUTE@ -o -6 route show | grep -v ' cache' | sed -E -e 's/ expires [0-9]*sec//' -e 's/ (mtu|hoplimit|cwnd|ssthresh) [0-9]+//g' -e 's/ (rtt|rttvar) [0-9]+ms//g'
- return
- fi
-
- # try uname
- case `uname -s` in
- Linux)
- echo "-- linux / ifconfig --"
- LANG=C @IFCONFIG@ -a |egrep "( addr:|encap:)"
- LANG=C @NETSTAT@ -rn -4 -6
- return
- ;;
- FreeBSD|NetBSD|Darwin)
- echo "-- FreeBSD/NetBSD/Darwin [MacOS X] --"
- @IFCONFIG@ -a | egrep "(flags=|inet)"
- @NETSTAT@ -rn | awk '$3 !~ /^UHL/ { print $1,$2,$3,$NF }'
- return
- ;;
- OpenBSD)
- echo "-- OpenBSD --"
- @IFCONFIG@ -a | egrep "(flags=|inet)" | \
- sed -e 's/pltime [0-9]*//' -e 's/vltime [0-9]*//'
- @NETSTAT@ -rn | awk '$3 !~ /^UHL/ { print $1,$2,$3,$NF }'
- return
- ;;
- SunOS)
- echo "-- Solaris --"
- @IFCONFIG@ -a | egrep "(flags=|inet)"
- @NETSTAT@ -rn | awk '$3 !~ /^UHL/ { print $1,$2,$3,$6 }'
- return
- ;;
- AIX)
- echo "-- AIX --"
- @IFCONFIG@ -a | egrep "(flags=|inet)"
- @NETSTAT@ -rn | awk '$3 !~ /^UHL/ { print $1,$2,$3,$6 }'
- return
- ;;
- esac
-
- echo "get_ifconfig_route(): no idea how to get info on your OS. FAIL." >&2
- exit 20
-}
-
-# ----------------------------------------------------------
-# check ifconfig
-# arg1: "4" or "6" -> for message
-# arg2: IPv4/IPv6 address that must show up in out of "get_ifconfig_route"
-check_ifconfig()
-{
- proto=$1 ; shift
- expect_list="$@"
-
- if [ -z "$expect_list" ] ; then return ; fi
-
- for expect in $expect_list
- do
- if get_ifconfig_route | fgrep "$expect" >/dev/null
- then :
- else
- fail "check_ifconfig(): expected IPv$proto address '$expect' not found in ifconfig output."
- fi
- done
-}
-
-# ----------------------------------------------------------
-# run pings
-# arg1: "4" or "6" -> fping/fing6
-# arg2: "want_ok" or "want_fail" (expected ping result)
-# arg3... -> fping arguments (host list)
-run_ping_tests()
-{
- proto=$1 ; want=$2 ; shift ; shift
- targetlist="$@"
-
- # "no targets" is fine
- if [ -z "$targetlist" ] ; then return ; fi
-
- case $proto in
- 4) cmd=fping ;;
- 6) cmd=fping6 ;;
- *) echo "internal error in run_ping_tests arg 1: '$proto'" >&2
- exit 1 ;;
- esac
-
- case $want in
- want_ok) sizes_list="64 1440 3000" ;;
- want_fail) sizes_list="64" ;;
- esac
-
- for bytes in $sizes_list
- do
- echo "run IPv$proto ping tests ($want), $bytes byte packets..."
-
- echo "$cmd -b $bytes -C 20 -p 250 -q $targetlist" >>$LOGDIR/$SUF:fping.out
- $cmd -b $bytes -C 20 -p 250 -q $targetlist >>$LOGDIR/$SUF:fping.out 2>&1
-
- # while OpenVPN is running, pings must succeed (want='want_ok')
- # before OpenVPN is up, pings must NOT succeed (want='want_fail')
-
- rc=$?
- if [ $rc = 0 ] # all ping OK
- then
- if [ $want = "want_fail" ] # not what we want
- then
- fail "IPv$proto ping test succeeded, but needs to *fail*."
- fi
- else # ping failed
- if [ $want = "want_ok" ] # not what we wanted
- then
- fail "IPv$proto ping test ($bytes bytes) failed, but should succeed."
- fi
- fi
- done
-}
-
-# ----------------------------------------------------------
-# main test loop
-# ----------------------------------------------------------
-SUMMARY_OK=
-SUMMARY_FAIL=
-
-for SUF in $TEST_RUN_LIST
-do
- # get config variables
- eval test_prep=\"\$PREPARE_$SUF\"
- eval test_cleanup=\"\$CLEANUP_$SUF\"
- eval test_run_title=\"\$RUN_TITLE_$SUF\"
- eval openvpn_conf=\"\$OPENVPN_CONF_$SUF\"
- eval expect_ifconfig4=\"\$EXPECT_IFCONFIG4_$SUF\"
- eval expect_ifconfig6=\"\$EXPECT_IFCONFIG6_$SUF\"
- eval ping4_hosts=\"\$PING4_HOSTS_$SUF\"
- eval ping6_hosts=\"\$PING6_HOSTS_$SUF\"
-
- echo -e "\n### test run $SUF: '$test_run_title' ###\n"
- fail_count=0
-
- if [ -n "$test_prep" ]; then
- echo -e "running preparation: '$test_prep'"
- eval $test_prep
- fi
-
- echo "save pre-openvpn ifconfig + route"
- get_ifconfig_route >$LOGDIR/$SUF:ifconfig_route_pre.txt
-
- echo -e "\nrun pre-openvpn ping tests - targets must not be reachable..."
- run_ping_tests 4 want_fail "$ping4_hosts"
- run_ping_tests 6 want_fail "$ping6_hosts"
- if [ "$fail_count" = 0 ] ; then
- echo -e "OK.\n"
- else
- echo -e "FAIL: make sure that ping hosts are ONLY reachable via VPN, SKIP test $SUF".
- exit_code=31
- continue
- fi
-
- echo " run openvpn $openvpn_conf"
- echo "# src/openvpn/openvpn $openvpn_conf" >$LOGDIR/$SUF:openvpn.log
- $RUN_SUDO "${top_builddir}/src/openvpn/openvpn" $openvpn_conf >>$LOGDIR/$SUF:openvpn.log &
- opid=$!
-
- # make sure openvpn client is terminated in case shell exits
- trap "$RUN_SUDO kill $opid" 0
- trap "$RUN_SUDO kill $opid ; trap - 0 ; exit 1" 1 2 3 15
-
- echo "wait for connection to establish..."
- sleep ${SETUP_TIME_WAIT:-10}
-
- # test whether OpenVPN process is still there
- if $RUN_SUDO kill -0 $opid
- then :
- else
- echo -e "OpenVPN process has failed to start up, check log ($LOGDIR/$SUF:openvpn.log). FAIL.\ntail of logfile follows:\n..." >&2
- tail $LOGDIR/$SUF:openvpn.log >&2
- trap - 0 1 2 3 15
- exit 10
- fi
-
- # compare whether anything changed in ifconfig/route setup?
- echo "save ifconfig+route"
- get_ifconfig_route >$LOGDIR/$SUF:ifconfig_route.txt
-
- echo -n "compare pre-openvpn ifconfig+route with current values..."
- if diff $LOGDIR/$SUF:ifconfig_route_pre.txt \
- $LOGDIR/$SUF:ifconfig_route.txt >/dev/null
- then
- fail "no differences between ifconfig/route before OpenVPN start and now."
- else
- echo -e " OK!\n"
- fi
-
- # expected ifconfig values in there?
- check_ifconfig 4 "$expect_ifconfig4"
- check_ifconfig 6 "$expect_ifconfig6"
-
- run_ping_tests 4 want_ok "$ping4_hosts"
- run_ping_tests 6 want_ok "$ping6_hosts"
- echo -e "ping tests done.\n"
-
- echo "stopping OpenVPN"
- $RUN_SUDO kill $opid
- wait $!
- rc=$?
- if [ $rc != 0 ] ; then
- fail "OpenVPN return code $rc, expect 0"
- fi
-
- echo -e "\nsave post-openvpn ifconfig + route..."
- get_ifconfig_route >$LOGDIR/$SUF:ifconfig_route_post.txt
-
- echo -n "compare pre- and post-openvpn ifconfig + route..."
- if diff $LOGDIR/$SUF:ifconfig_route_pre.txt \
- $LOGDIR/$SUF:ifconfig_route_post.txt >$LOGDIR/$SUF:ifconfig_route_diff.txt
- then
- echo -e " OK.\n"
- else
- cat $LOGDIR/$SUF:ifconfig_route_diff.txt >&2
- fail "differences between pre- and post-ifconfig/route"
- fi
- if [ "$fail_count" = 0 ] ; then
- echo -e "test run $SUF: all tests OK.\n"
- SUMMARY_OK="$SUMMARY_OK $SUF"
- else
- echo -e "test run $SUF: $fail_count test failures. FAIL.\n";
- SUMMARY_FAIL="$SUMMARY_FAIL $SUF"
- exit_code=30
- fi
-
- if [ -n "$test_cleanup" ]; then
- echo -e "cleaning up: '$test_cleanup'"
- eval $test_cleanup
- fi
-
-done
-
-if [ -z "$SUMMARY_OK" ] ; then SUMMARY_OK=" none"; fi
-if [ -z "$SUMMARY_FAIL" ] ; then SUMMARY_FAIL=" none"; fi
-echo "Test sets succeded:$SUMMARY_OK."
-echo "Test sets failed:$SUMMARY_FAIL."
-
-# remove trap handler
-trap - 0 1 2 3 15
-exit $exit_code
diff --git a/main/openvpn/tests/t_cltsrv-down.sh b/main/openvpn/tests/t_cltsrv-down.sh
deleted file mode 100755
index 2ef852aa..00000000
--- a/main/openvpn/tests/t_cltsrv-down.sh
+++ /dev/null
@@ -1,2 +0,0 @@
-#! /bin/sh
-echo "${role}:${signal}" >&3
diff --git a/main/openvpn/tests/t_cltsrv.sh b/main/openvpn/tests/t_cltsrv.sh
deleted file mode 100755
index 752251e4..00000000
--- a/main/openvpn/tests/t_cltsrv.sh
+++ /dev/null
@@ -1,91 +0,0 @@
-#! /bin/sh
-#
-# t_cltsrv.sh - script to test OpenVPN's crypto loopback
-# Copyright (C) 2005, 2006, 2008 Matthias Andree
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-set -e
-srcdir="${srcdir:-.}"
-top_srcdir="${top_srcdir:-..}"
-top_builddir="${top_builddir:-..}"
-trap "rm -f log.$$ log.$$.signal ; trap 0 ; exit 77" 1 2 15
-trap "rm -f log.$$ log.$$.signal ; exit 1" 0 3
-addopts=
-case `uname -s` in
- FreeBSD)
- # FreeBSD jails map the outgoing IP to the jail IP - we need to
- # allow the real IP unless we want the test to run forever.
- if test "`sysctl 2>/dev/null -n security.jail.jailed`" = 1 \
- || ps -ostate= -p $$ | grep -q J; then
- addopts="--float"
- if test "x`ifconfig | grep inet`" = x ; then
- echo "###"
- echo "### To run the test in a FreeBSD jail, you MUST add an IP alias for the jail's IP."
- echo "###"
- exit 77
- fi
- fi
- ;;
-esac
-
-# make sure that the --down script is executable -- fail (rather than
-# skip) test if it isn't.
-downscript="../tests/t_cltsrv-down.sh"
-root="${top_srcdir}/sample"
-test -x "${root}/${downscript}" || chmod +x "${root}/${downscript}" || { echo >&2 "${root}/${downscript} is not executable, failing." ; exit 1 ; }
-echo "The following test will take about two minutes." >&2
-echo "If the addresses are in use, this test will retry up to two times." >&2
-
-# go
-success=0
-for i in 1 2 3 ; do
- set +e
- (
- "${top_builddir}/src/openvpn/openvpn" --script-security 2 --cd "${root}" ${addopts} --setenv role srv --down "${downscript}" --tls-exit --ping-exit 180 --config "sample-config-files/loopback-server" &
- "${top_builddir}/src/openvpn/openvpn" --script-security 2 --cd "${top_srcdir}/sample" ${addopts} --setenv role clt --down "${downscript}" --tls-exit --ping-exit 180 --config "sample-config-files/loopback-client"
- ) 3>log.$$.signal >log.$$ 2>&1
- e1=$?
- wait $!
- e2=$?
- grep 'TCP/UDP: Socket bind failed on local address.*in use' log.$$ >/dev/null && {
- echo 'address in use, retrying in 150 s'
- sleep 150
- continue
- }
- grep -v ':inactive$' log.$$.signal >/dev/null && { cat log.$$.signal ; echo ; cat log.$$ ; exit 1 ; }
- success=1
- break
-done
-
-set -e
-
-# exit code - defaults to 0, PASS
-ec=0
-
-if [ $success != 1 ] ; then
- # couldn't run test -- addresses in use, skip test
- cat log.$$
- ec=77
-elif [ $e1 != 0 ] || [ $e2 != 0 ] ; then
- # failure -- fail test
- cat log.$$
- ec=1
-fi
-
-rm log.$$ log.$$.signal
-trap 0
-exit $ec
diff --git a/main/openvpn/tests/t_lpback.sh b/main/openvpn/tests/t_lpback.sh
deleted file mode 100755
index d7792cd3..00000000
--- a/main/openvpn/tests/t_lpback.sh
+++ /dev/null
@@ -1,60 +0,0 @@
-#! /bin/sh
-#
-# t_lpback.sh - script to test OpenVPN's crypto loopback
-# Copyright (C) 2005 Matthias Andree
-# Copyright (C) 2014 Steffan Karger
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-set -eu
-top_builddir="${top_builddir:-..}"
-trap "rm -f key.$$ log.$$ ; trap 0 ; exit 77" 1 2 15
-trap "rm -f key.$$ log.$$ ; exit 1" 0 3
-
-# Get list of supported ciphers from openvpn --show-ciphers output
-CIPHERS=$(${top_builddir}/src/openvpn/openvpn --show-ciphers | \
- sed -e '1,/^$/d' -e s'/ .*//' -e '/^\s*$/d' | sort)
-
-# SK, 2014-06-04: currently the DES-EDE3-CFB1 implementation of OpenSSL is
-# broken (see http://rt.openssl.org/Ticket/Display.html?id=2867), so exclude
-# that cipher from this test.
-# GD, 2014-07-06 so is DES-CFB1
-# GD, 2014-07-06 do not test RC5-* either (fails on NetBSD w/o libcrypto_rc5)
-CIPHERS=$(echo "$CIPHERS" | egrep -v '^(DES-EDE3-CFB1|DES-CFB1|RC5-)' )
-
-# Also test cipher 'none'
-CIPHERS=${CIPHERS}$(printf "\nnone")
-
-"${top_builddir}/src/openvpn/openvpn" --genkey --secret key.$$
-set +e
-
-e=0
-for cipher in ${CIPHERS}
-do
- echo -n "Testing cipher ${cipher}... "
- ( "${top_builddir}/src/openvpn/openvpn" --test-crypto --secret key.$$ --cipher ${cipher} ) >log.$$ 2>&1
- if [ $? != 0 ] ; then
- echo "FAILED"
- cat log.$$
- e=1
- else
- echo "OK"
- fi
-done
-
-rm key.$$ log.$$
-trap 0
-exit $e