Move more to git, add submodules, fix build script, change hgignore to gitignore

2 files changed, 0 insertions, 44 deletions

diff --git a/main/openvpn b/main/openvpn
new file mode 160000
+Subproject 7aaf01766f9718375986600216607aeb6397200
diff --git a/main/openvpn/contrib/openvpn-fwmarkroute-1.00/README b/main/openvpn/contrib/openvpn-fwmarkroute-1.00/README
deleted file mode 100644
index 66fe61ad..00000000
--- a/main/openvpn/contrib/openvpn-fwmarkroute-1.00/README
+++ /dev/null
@@ -1,44 +0,0 @@
-OpenVPN fwmark Routing
-Sean Reifschneider, <jafo@tummy.com>
-Thursday November 27, 2003
-==========================
-
-These scripts can be used with OpenVPN up and down scripts to set up
-routing on a Linux system such that the VPN traffic is sent via normal
-network connectivity, but other traffic to that network runs over the VPN.
-The idea is to allow encryption of data to the network the remote host is
-on, without interfering with the VPN traffic.  You can't simply add a route
-to the remote network, becaues that will cause the VPN traffic to also try
-to run over the VPN, and breaks the VPN.
-
-These scripts use the Linux "fwmark" iptables rules to specify routing
-based not only on IP address, but also by port and protocol.  This allows
-you to effectively say "if the packet is to this IP address on this port
-using this protocol, then use the normal default gateway, otherwise use the
-VPN gateway.
-
-This is set up on the client VPN system, not the VPN server.  These scripts
-also set up all ICMP echo-responses to run across the VPN.  You can
-comment the lines in the scripts to disable this, but I find this useful
-at coffee shops which have networks that block ICMP.
-
-To configure this, you need to set up these scripts as your up and down
-scripts in the config file.  You will need to set these values in the
-config file:
-
-   up /etc/openvpn/fwmarkroute.up
-   down /etc/openvpn/fwmarkroute.down
-   up-restart
-   up-delay
-
-   setenv remote_netmask_bits 24
-
-Note: For this to work, you can't set the "user" or "group" config options,
-because then the scripts will not run as root.
-
-The last setting allows you to control the size of the network the remote
-system is on.  The remote end has to be set up to route, probably with
-masquerading or NAT.  The network this netmask relates to is calculated
-using the value of "remote" in the conf file.
-
-Sean