Move more to git, add submodules, fix build script, change hgignore to gitignore

2 files changed, 0 insertions, 601 deletions

diff --git a/main/openssl b/main/openssl
new file mode 160000
+Subproject 4d377a9ce111930d8a8f06dc0e94a892a7f6c51
diff --git a/main/openssl/crypto/sha/asm/sha1-sparcv9a.pl b/main/openssl/crypto/sha/asm/sha1-sparcv9a.pl
deleted file mode 100644
index e65291bb..00000000
--- a/main/openssl/crypto/sha/asm/sha1-sparcv9a.pl
+++ /dev/null
@@ -1,601 +0,0 @@
-#!/usr/bin/env perl
-
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# January 2009
-#
-# Provided that UltraSPARC VIS instructions are pipe-lined(*) and
-# pairable(*) with IALU ones, offloading of Xupdate to the UltraSPARC
-# Graphic Unit would make it possible to achieve higher instruction-
-# level parallelism, ILP, and thus higher performance. It should be
-# explicitly noted that ILP is the keyword, and it means that this
-# code would be unsuitable for cores like UltraSPARC-Tx. The idea is
-# not really novel, Sun had VIS-powered implementation for a while.
-# Unlike Sun's implementation this one can process multiple unaligned
-# input blocks, and as such works as drop-in replacement for OpenSSL
-# sha1_block_data_order. Performance improvement was measured to be
-# 40% over pure IALU sha1-sparcv9.pl on UltraSPARC-IIi, but 12% on
-# UltraSPARC-III. See below for discussion...
-#
-# The module does not present direct interest for OpenSSL, because
-# it doesn't provide better performance on contemporary SPARCv9 CPUs,
-# UltraSPARC-Tx and SPARC64-V[II] to be specific. Those who feel they
-# absolutely must score on UltraSPARC-I-IV can simply replace
-# crypto/sha/asm/sha1-sparcv9.pl with this module.
-#
-# (*)	"Pipe-lined" means that even if it takes several cycles to
-#	complete, next instruction using same functional unit [but not
-#	depending on the result of the current instruction] can start
-#	execution without having to wait for the unit. "Pairable"
-#	means that two [or more] independent instructions can be
-#	issued at the very same time.
-
-$bits=32;
-for (@ARGV)	{ $bits=64 if (/\-m64/ || /\-xarch\=v9/); }
-if ($bits==64)	{ $bias=2047; $frame=192; }
-else		{ $bias=0;    $frame=112; }
-
-$output=shift;
-open STDOUT,">$output";
-
-$ctx="%i0";
-$inp="%i1";
-$len="%i2";
-$tmp0="%i3";
-$tmp1="%i4";
-$tmp2="%i5";
-$tmp3="%g5";
-
-$base="%g1";
-$align="%g4";
-$Xfer="%o5";
-$nXfer=$tmp3;
-$Xi="%o7";
-
-$A="%l0";
-$B="%l1";
-$C="%l2";
-$D="%l3";
-$E="%l4";
-@V=($A,$B,$C,$D,$E);
-
-$Actx="%o0";
-$Bctx="%o1";
-$Cctx="%o2";
-$Dctx="%o3";
-$Ectx="%o4";
-
-$fmul="%f32";
-$VK_00_19="%f34";
-$VK_20_39="%f36";
-$VK_40_59="%f38";
-$VK_60_79="%f40";
-@VK=($VK_00_19,$VK_20_39,$VK_40_59,$VK_60_79);
-@X=("%f0", "%f1", "%f2", "%f3", "%f4", "%f5", "%f6", "%f7",
-    "%f8", "%f9","%f10","%f11","%f12","%f13","%f14","%f15","%f16");
-
-# This is reference 2x-parallelized VIS-powered Xupdate procedure. It
-# covers even K_NN_MM addition...
-sub Xupdate {
-my ($i)=@_;
-my $K=@VK[($i+16)/20];
-my $j=($i+16)%16;
-
-#	[ provided that GSR.alignaddr_offset is 5, $mul contains
-#	  0x100ULL<<32|0x100 value and K_NN_MM are pre-loaded to
-#	  chosen registers... ]
-$code.=<<___;
-	fxors		@X[($j+13)%16],@X[$j],@X[$j]	!-1/-1/-1:X[0]^=X[13]
-	fxors		@X[($j+14)%16],@X[$j+1],@X[$j+1]! 0/ 0/ 0:X[1]^=X[14]
-	fxor		@X[($j+2)%16],@X[($j+8)%16],%f18! 1/ 1/ 1:Tmp=X[2,3]^X[8,9]
-	fxor		%f18,@X[$j],@X[$j]		! 2/ 4/ 3:X[0,1]^=X[2,3]^X[8,9]
-	faligndata	@X[$j],@X[$j],%f18		! 3/ 7/ 5:Tmp=X[0,1]>>>24
-	fpadd32		@X[$j],@X[$j],@X[$j]		! 4/ 8/ 6:X[0,1]<<=1
-	fmul8ulx16	%f18,$fmul,%f18			! 5/10/ 7:Tmp>>=7, Tmp&=1
-	![fxors		%f15,%f2,%f2]
-	for		%f18,@X[$j],@X[$j]		! 8/14/10:X[0,1]|=Tmp
-	![fxors		%f0,%f3,%f3]			!10/17/12:X[0] dependency
-	fpadd32		$K,@X[$j],%f20
-	std		%f20,[$Xfer+`4*$j`]
-___
-# The numbers delimited with slash are the earliest possible dispatch
-# cycles for given instruction assuming 1 cycle latency for simple VIS
-# instructions, such as on UltraSPARC-I&II, 3 cycles latency, such as
-# on UltraSPARC-III&IV, and 2 cycles latency(*), respectively. Being
-# 2x-parallelized the procedure is "worth" 5, 8.5 or 6 ticks per SHA1
-# round. As [long as] FPU/VIS instructions are perfectly pairable with
-# IALU ones, the round timing is defined by the maximum between VIS
-# and IALU timings. The latter varies from round to round and averages
-# out at 6.25 ticks. This means that USI&II should operate at IALU
-# rate, while USIII&IV - at VIS rate. This explains why performance
-# improvement varies among processors. Well, given that pure IALU
-# sha1-sparcv9.pl module exhibits virtually uniform performance of
-# ~9.3 cycles per SHA1 round. Timings mentioned above are theoretical
-# lower limits. Real-life performance was measured to be 6.6 cycles
-# per SHA1 round on USIIi and 8.3 on USIII. The latter is lower than
-# half-round VIS timing, because there are 16 Xupdate-free rounds,
-# which "push down" average theoretical timing to 8 cycles...
-
-# (*)	SPARC64-V[II] was originally believed to have 2 cycles VIS
-#	latency. Well, it might have, but it doesn't have dedicated
-#	VIS-unit. Instead, VIS instructions are executed by other
-#	functional units, ones used here - by IALU. This doesn't
-#	improve effective ILP...
-}
-
-# The reference Xupdate procedure is then "strained" over *pairs* of
-# BODY_NN_MM and kind of modulo-scheduled in respect to X[n]^=X[n+13]
-# and K_NN_MM addition. It's "running" 15 rounds ahead, which leaves
-# plenty of room to amortize for read-after-write hazard, as well as
-# to fetch and align input for the next spin. The VIS instructions are
-# scheduled for latency of 2 cycles, because there are not enough IALU
-# instructions to schedule for latency of 3, while scheduling for 1
-# would give no gain on USI&II anyway.
-
-sub BODY_00_19 {
-my ($i,$a,$b,$c,$d,$e)=@_;
-my $j=$i&~1;
-my $k=($j+16+2)%16;	# ahead reference
-my $l=($j+16-2)%16;	# behind reference
-my $K=@VK[($j+16-2)/20];
-
-$j=($j+16)%16;
-
-$code.=<<___ if (!($i&1));
-	sll		$a,5,$tmp0			!! $i
-	and		$c,$b,$tmp3
-	ld		[$Xfer+`4*($i%16)`],$Xi
-	 fxors		@X[($j+14)%16],@X[$j+1],@X[$j+1]! 0/ 0/ 0:X[1]^=X[14]
-	srl		$a,27,$tmp1
-	add		$tmp0,$e,$e
-	 fxor		@X[($j+2)%16],@X[($j+8)%16],%f18! 1/ 1/ 1:Tmp=X[2,3]^X[8,9]
-	sll		$b,30,$tmp2
-	add		$tmp1,$e,$e
-	andn		$d,$b,$tmp1
-	add		$Xi,$e,$e
-	 fxor		%f18,@X[$j],@X[$j]		! 2/ 4/ 3:X[0,1]^=X[2,3]^X[8,9]
-	srl		$b,2,$b
-	or		$tmp1,$tmp3,$tmp1
-	or		$tmp2,$b,$b
-	add		$tmp1,$e,$e
-	 faligndata	@X[$j],@X[$j],%f18		! 3/ 7/ 5:Tmp=X[0,1]>>>24
-___
-$code.=<<___ if ($i&1);
-	sll		$a,5,$tmp0			!! $i
-	and		$c,$b,$tmp3
-	ld		[$Xfer+`4*($i%16)`],$Xi
-	 fpadd32	@X[$j],@X[$j],@X[$j]		! 4/ 8/ 6:X[0,1]<<=1
-	srl		$a,27,$tmp1
-	add		$tmp0,$e,$e
-	 fmul8ulx16	%f18,$fmul,%f18			! 5/10/ 7:Tmp>>=7, Tmp&=1
-	sll		$b,30,$tmp2
-	add		$tmp1,$e,$e
-	 fpadd32	$K,@X[$l],%f20			!
-	andn		$d,$b,$tmp1
-	add		$Xi,$e,$e
-	 fxors		@X[($k+13)%16],@X[$k],@X[$k]	!-1/-1/-1:X[0]^=X[13]
-	srl		$b,2,$b
-	or		$tmp1,$tmp3,$tmp1
-	 fxor		%f18,@X[$j],@X[$j]		! 8/14/10:X[0,1]|=Tmp
-	or		$tmp2,$b,$b
-	add		$tmp1,$e,$e
-___
-$code.=<<___ if ($i&1 && $i>=2);
-	 std		%f20,[$Xfer+`4*$l`]		!
-___
-}
-
-sub BODY_20_39 {
-my ($i,$a,$b,$c,$d,$e)=@_;
-my $j=$i&~1;
-my $k=($j+16+2)%16;	# ahead reference
-my $l=($j+16-2)%16;	# behind reference
-my $K=@VK[($j+16-2)/20];
-
-$j=($j+16)%16;
-
-$code.=<<___ if (!($i&1) && $i<64);
-	sll		$a,5,$tmp0			!! $i
-	ld		[$Xfer+`4*($i%16)`],$Xi
-	 fxors		@X[($j+14)%16],@X[$j+1],@X[$j+1]! 0/ 0/ 0:X[1]^=X[14]
-	srl		$a,27,$tmp1
-	add		$tmp0,$e,$e
-	 fxor		@X[($j+2)%16],@X[($j+8)%16],%f18! 1/ 1/ 1:Tmp=X[2,3]^X[8,9]
-	xor		$c,$b,$tmp0
-	add		$tmp1,$e,$e
-	sll		$b,30,$tmp2
-	xor		$d,$tmp0,$tmp1
-	 fxor		%f18,@X[$j],@X[$j]		! 2/ 4/ 3:X[0,1]^=X[2,3]^X[8,9]
-	srl		$b,2,$b
-	add		$tmp1,$e,$e
-	or		$tmp2,$b,$b
-	add		$Xi,$e,$e
-	 faligndata	@X[$j],@X[$j],%f18		! 3/ 7/ 5:Tmp=X[0,1]>>>24
-___
-$code.=<<___ if ($i&1 && $i<64);
-	sll		$a,5,$tmp0			!! $i
-	ld		[$Xfer+`4*($i%16)`],$Xi
-	 fpadd32	@X[$j],@X[$j],@X[$j]		! 4/ 8/ 6:X[0,1]<<=1
-	srl		$a,27,$tmp1
-	add		$tmp0,$e,$e
-	 fmul8ulx16	%f18,$fmul,%f18			! 5/10/ 7:Tmp>>=7, Tmp&=1
-	xor		$c,$b,$tmp0
-	add		$tmp1,$e,$e
-	 fpadd32	$K,@X[$l],%f20			!
-	sll		$b,30,$tmp2
-	xor		$d,$tmp0,$tmp1
-	 fxors		@X[($k+13)%16],@X[$k],@X[$k]	!-1/-1/-1:X[0]^=X[13]
-	srl		$b,2,$b
-	add		$tmp1,$e,$e
-	 fxor		%f18,@X[$j],@X[$j]		! 8/14/10:X[0,1]|=Tmp
-	or		$tmp2,$b,$b
-	add		$Xi,$e,$e
-	 std		%f20,[$Xfer+`4*$l`]		!
-___
-$code.=<<___ if ($i==64);
-	sll		$a,5,$tmp0			!! $i
-	ld		[$Xfer+`4*($i%16)`],$Xi
-	 fpadd32	$K,@X[$l],%f20
-	srl		$a,27,$tmp1
-	add		$tmp0,$e,$e
-	xor		$c,$b,$tmp0
-	add		$tmp1,$e,$e
-	sll		$b,30,$tmp2
-	xor		$d,$tmp0,$tmp1
-	 std		%f20,[$Xfer+`4*$l`]
-	srl		$b,2,$b
-	add		$tmp1,$e,$e
-	or		$tmp2,$b,$b
-	add		$Xi,$e,$e
-___
-$code.=<<___ if ($i>64);
-	sll		$a,5,$tmp0			!! $i
-	ld		[$Xfer+`4*($i%16)`],$Xi
-	srl		$a,27,$tmp1
-	add		$tmp0,$e,$e
-	xor		$c,$b,$tmp0
-	add		$tmp1,$e,$e
-	sll		$b,30,$tmp2
-	xor		$d,$tmp0,$tmp1
-	srl		$b,2,$b
-	add		$tmp1,$e,$e
-	or		$tmp2,$b,$b
-	add		$Xi,$e,$e
-___
-}
-
-sub BODY_40_59 {
-my ($i,$a,$b,$c,$d,$e)=@_;
-my $j=$i&~1;
-my $k=($j+16+2)%16;	# ahead reference
-my $l=($j+16-2)%16;	# behind reference
-my $K=@VK[($j+16-2)/20];
-
-$j=($j+16)%16;
-
-$code.=<<___ if (!($i&1));
-	sll		$a,5,$tmp0			!! $i
-	ld		[$Xfer+`4*($i%16)`],$Xi
-	 fxors		@X[($j+14)%16],@X[$j+1],@X[$j+1]! 0/ 0/ 0:X[1]^=X[14]
-	srl		$a,27,$tmp1
-	add		$tmp0,$e,$e
-	 fxor		@X[($j+2)%16],@X[($j+8)%16],%f18! 1/ 1/ 1:Tmp=X[2,3]^X[8,9]
-	and		$c,$b,$tmp0
-	add		$tmp1,$e,$e
-	sll		$b,30,$tmp2
-	or		$c,$b,$tmp1
-	 fxor		%f18,@X[$j],@X[$j]		! 2/ 4/ 3:X[0,1]^=X[2,3]^X[8,9]
-	srl		$b,2,$b
-	and		$d,$tmp1,$tmp1
-	add		$Xi,$e,$e
-	or		$tmp1,$tmp0,$tmp1
-	 faligndata	@X[$j],@X[$j],%f18		! 3/ 7/ 5:Tmp=X[0,1]>>>24
-	or		$tmp2,$b,$b
-	add		$tmp1,$e,$e
-	 fpadd32	@X[$j],@X[$j],@X[$j]		! 4/ 8/ 6:X[0,1]<<=1
-___
-$code.=<<___ if ($i&1);
-	sll		$a,5,$tmp0			!! $i
-	ld		[$Xfer+`4*($i%16)`],$Xi
-	srl		$a,27,$tmp1
-	add		$tmp0,$e,$e
-	 fmul8ulx16	%f18,$fmul,%f18			! 5/10/ 7:Tmp>>=7, Tmp&=1
-	and		$c,$b,$tmp0
-	add		$tmp1,$e,$e
-	 fpadd32	$K,@X[$l],%f20			!
-	sll		$b,30,$tmp2
-	or		$c,$b,$tmp1
-	 fxors		@X[($k+13)%16],@X[$k],@X[$k]	!-1/-1/-1:X[0]^=X[13]
-	srl		$b,2,$b
-	and		$d,$tmp1,$tmp1
-	 fxor		%f18,@X[$j],@X[$j]		! 8/14/10:X[0,1]|=Tmp
-	add		$Xi,$e,$e
-	or		$tmp1,$tmp0,$tmp1
-	or		$tmp2,$b,$b
-	add		$tmp1,$e,$e
-	 std		%f20,[$Xfer+`4*$l`]		!
-___
-}
-
-# If there is more data to process, then we pre-fetch the data for
-# next iteration in last ten rounds...
-sub BODY_70_79 {
-my ($i,$a,$b,$c,$d,$e)=@_;
-my $j=$i&~1;
-my $m=($i%8)*2;
-
-$j=($j+16)%16;
-
-$code.=<<___ if ($i==70);
-	sll		$a,5,$tmp0			!! $i
-	ld		[$Xfer+`4*($i%16)`],$Xi
-	srl		$a,27,$tmp1
-	add		$tmp0,$e,$e
-	 ldd		[$inp+64],@X[0]
-	xor		$c,$b,$tmp0
-	add		$tmp1,$e,$e
-	sll		$b,30,$tmp2
-	xor		$d,$tmp0,$tmp1
-	srl		$b,2,$b
-	add		$tmp1,$e,$e
-	or		$tmp2,$b,$b
-	add		$Xi,$e,$e
-
-	and		$inp,-64,$nXfer
-	inc		64,$inp
-	and		$nXfer,255,$nXfer
-	alignaddr	%g0,$align,%g0
-	add		$base,$nXfer,$nXfer
-___
-$code.=<<___ if ($i==71);
-	sll		$a,5,$tmp0			!! $i
-	ld		[$Xfer+`4*($i%16)`],$Xi
-	srl		$a,27,$tmp1
-	add		$tmp0,$e,$e
-	xor		$c,$b,$tmp0
-	add		$tmp1,$e,$e
-	sll		$b,30,$tmp2
-	xor		$d,$tmp0,$tmp1
-	srl		$b,2,$b
-	add		$tmp1,$e,$e
-	or		$tmp2,$b,$b
-	add		$Xi,$e,$e
-___
-$code.=<<___ if ($i>=72);
-	 faligndata	@X[$m],@X[$m+2],@X[$m]
-	sll		$a,5,$tmp0			!! $i
-	ld		[$Xfer+`4*($i%16)`],$Xi
-	srl		$a,27,$tmp1
-	add		$tmp0,$e,$e
-	xor		$c,$b,$tmp0
-	add		$tmp1,$e,$e
-	 fpadd32	$VK_00_19,@X[$m],%f20
-	sll		$b,30,$tmp2
-	xor		$d,$tmp0,$tmp1
-	srl		$b,2,$b
-	add		$tmp1,$e,$e
-	or		$tmp2,$b,$b
-	add		$Xi,$e,$e
-___
-$code.=<<___ if ($i<77);
-	 ldd		[$inp+`8*($i+1-70)`],@X[2*($i+1-70)]
-___
-$code.=<<___ if ($i==77);	# redundant if $inp was aligned
-	 add		$align,63,$tmp0
-	 and		$tmp0,-8,$tmp0
-	 ldd		[$inp+$tmp0],@X[16]
-___
-$code.=<<___ if ($i>=72);
-	 std		%f20,[$nXfer+`4*$m`]
-___
-}
-
-$code.=<<___;
-.section	".text",#alloc,#execinstr
-
-.align	64
-vis_const:
-.long	0x5a827999,0x5a827999	! K_00_19
-.long	0x6ed9eba1,0x6ed9eba1	! K_20_39
-.long	0x8f1bbcdc,0x8f1bbcdc	! K_40_59
-.long	0xca62c1d6,0xca62c1d6	! K_60_79
-.long	0x00000100,0x00000100
-.align	64
-.type	vis_const,#object
-.size	vis_const,(.-vis_const)
-
-.globl	sha1_block_data_order
-sha1_block_data_order:
-	save	%sp,-$frame,%sp
-	add	%fp,$bias-256,$base
-
-1:	call	.+8
-	add	%o7,vis_const-1b,$tmp0
-
-	ldd	[$tmp0+0],$VK_00_19
-	ldd	[$tmp0+8],$VK_20_39
-	ldd	[$tmp0+16],$VK_40_59
-	ldd	[$tmp0+24],$VK_60_79
-	ldd	[$tmp0+32],$fmul
-
-	ld	[$ctx+0],$Actx
-	and	$base,-256,$base
-	ld	[$ctx+4],$Bctx
-	sub	$base,$bias+$frame,%sp
-	ld	[$ctx+8],$Cctx
-	and	$inp,7,$align
-	ld	[$ctx+12],$Dctx
-	and	$inp,-8,$inp
-	ld	[$ctx+16],$Ectx
-
-	! X[16] is maintained in FP register bank
-	alignaddr	%g0,$align,%g0
-	ldd		[$inp+0],@X[0]
-	sub		$inp,-64,$Xfer
-	ldd		[$inp+8],@X[2]
-	and		$Xfer,-64,$Xfer
-	ldd		[$inp+16],@X[4]
-	and		$Xfer,255,$Xfer
-	ldd		[$inp+24],@X[6]
-	add		$base,$Xfer,$Xfer
-	ldd		[$inp+32],@X[8]
-	ldd		[$inp+40],@X[10]
-	ldd		[$inp+48],@X[12]
-	brz,pt		$align,.Laligned
-	ldd		[$inp+56],@X[14]
-
-	ldd		[$inp+64],@X[16]
-	faligndata	@X[0],@X[2],@X[0]
-	faligndata	@X[2],@X[4],@X[2]
-	faligndata	@X[4],@X[6],@X[4]
-	faligndata	@X[6],@X[8],@X[6]
-	faligndata	@X[8],@X[10],@X[8]
-	faligndata	@X[10],@X[12],@X[10]
-	faligndata	@X[12],@X[14],@X[12]
-	faligndata	@X[14],@X[16],@X[14]
-
-.Laligned:
-	mov		5,$tmp0
-	dec		1,$len
-	alignaddr	%g0,$tmp0,%g0
-	fpadd32		$VK_00_19,@X[0],%f16
-	fpadd32		$VK_00_19,@X[2],%f18
-	fpadd32		$VK_00_19,@X[4],%f20
-	fpadd32		$VK_00_19,@X[6],%f22
-	fpadd32		$VK_00_19,@X[8],%f24
-	fpadd32		$VK_00_19,@X[10],%f26
-	fpadd32		$VK_00_19,@X[12],%f28
-	fpadd32		$VK_00_19,@X[14],%f30
-	std		%f16,[$Xfer+0]
-	mov		$Actx,$A
-	std		%f18,[$Xfer+8]
-	mov		$Bctx,$B
-	std		%f20,[$Xfer+16]
-	mov		$Cctx,$C
-	std		%f22,[$Xfer+24]
-	mov		$Dctx,$D
-	std		%f24,[$Xfer+32]
-	mov		$Ectx,$E
-	std		%f26,[$Xfer+40]
-	fxors		@X[13],@X[0],@X[0]
-	std		%f28,[$Xfer+48]
-	ba		.Loop
-	std		%f30,[$Xfer+56]
-.align	32
-.Loop:
-___
-for ($i=0;$i<20;$i++)	{ &BODY_00_19($i,@V); unshift(@V,pop(@V)); }
-for (;$i<40;$i++)	{ &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
-for (;$i<60;$i++)	{ &BODY_40_59($i,@V); unshift(@V,pop(@V)); }
-for (;$i<70;$i++)	{ &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
-$code.=<<___;
-	tst		$len
-	bz,pn		`$bits==32?"%icc":"%xcc"`,.Ltail
-	nop
-___
-for (;$i<80;$i++)	{ &BODY_70_79($i,@V); unshift(@V,pop(@V)); }
-$code.=<<___;
-	add		$A,$Actx,$Actx
-	add		$B,$Bctx,$Bctx
-	add		$C,$Cctx,$Cctx
-	add		$D,$Dctx,$Dctx
-	add		$E,$Ectx,$Ectx
-	mov		5,$tmp0
-	fxors		@X[13],@X[0],@X[0]
-	mov		$Actx,$A
-	mov		$Bctx,$B
-	mov		$Cctx,$C
-	mov		$Dctx,$D
-	mov		$Ectx,$E
-	alignaddr	%g0,$tmp0,%g0	
-	dec		1,$len
-	ba		.Loop
-	mov		$nXfer,$Xfer
-
-.align	32
-.Ltail:
-___
-for($i=70;$i<80;$i++)	{ &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
-$code.=<<___;
-	add	$A,$Actx,$Actx
-	add	$B,$Bctx,$Bctx
-	add	$C,$Cctx,$Cctx
-	add	$D,$Dctx,$Dctx
-	add	$E,$Ectx,$Ectx
-
-	st	$Actx,[$ctx+0]
-	st	$Bctx,[$ctx+4]
-	st	$Cctx,[$ctx+8]
-	st	$Dctx,[$ctx+12]
-	st	$Ectx,[$ctx+16]
-
-	ret
-	restore
-.type	sha1_block_data_order,#function
-.size	sha1_block_data_order,(.-sha1_block_data_order)
-.asciz	"SHA1 block transform for SPARCv9a, CRYPTOGAMS by <appro\@openssl.org>"
-.align	4
-___
-
-# Purpose of these subroutines is to explicitly encode VIS instructions,
-# so that one can compile the module without having to specify VIS
-# extentions on compiler command line, e.g. -xarch=v9 vs. -xarch=v9a.
-# Idea is to reserve for option to produce "universal" binary and let
-# programmer detect if current CPU is VIS capable at run-time.
-sub unvis {
-my ($mnemonic,$rs1,$rs2,$rd)=@_;
-my ($ref,$opf);
-my %visopf = (	"fmul8ulx16"	=> 0x037,
-		"faligndata"	=> 0x048,
-		"fpadd32"	=> 0x052,
-		"fxor"		=> 0x06c,
-		"fxors"		=> 0x06d	);
-
-    $ref = "$mnemonic\t$rs1,$rs2,$rd";
-
-    if ($opf=$visopf{$mnemonic}) {
-	foreach ($rs1,$rs2,$rd) {
-	    return $ref if (!/%f([0-9]{1,2})/);
-	    $_=$1;
-	    if ($1>=32) {
-		return $ref if ($1&1);
-		# re-encode for upper double register addressing
-		$_=($1|$1>>5)&31;
-	    }
-	}
-
-	return	sprintf ".word\t0x%08x !%s",
-			0x81b00000|$rd<<25|$rs1<<14|$opf<<5|$rs2,
-			$ref;
-    } else {
-	return $ref;
-    }
-}
-sub unalignaddr {
-my ($mnemonic,$rs1,$rs2,$rd)=@_;
-my %bias = ( "g" => 0, "o" => 8, "l" => 16, "i" => 24 );
-my $ref="$mnemonic\t$rs1,$rs2,$rd";
-
-    foreach ($rs1,$rs2,$rd) {
-	if (/%([goli])([0-7])/)	{ $_=$bias{$1}+$2; }
-	else			{ return $ref; }
-    }
-    return  sprintf ".word\t0x%08x !%s",
-		    0x81b00300|$rd<<25|$rs1<<14|$rs2,
-		    $ref;
-}
-
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-$code =~ s/\b(f[^\s]*)\s+(%f[0-9]{1,2}),(%f[0-9]{1,2}),(%f[0-9]{1,2})/
-		&unvis($1,$2,$3,$4)
-	  /gem;
-$code =~ s/\b(alignaddr)\s+(%[goli][0-7]),(%[goli][0-7]),(%[goli][0-7])/
-		&unalignaddr($1,$2,$3,$4)
-	  /gem;
-print $code;
-close STDOUT;