From 35da277fe75b2786952dbfb867cf60bdaab5f65d Mon Sep 17 00:00:00 2001
From: Adam Kocoloski <adam@cloudant.com>
Date: Wed, 11 Aug 2010 16:56:51 -0400
Subject: replace autotools with rebar

---
 etc/Makefile.am | 117 --------------------------------------------------------
 1 file changed, 117 deletions(-)
 delete mode 100644 etc/Makefile.am

(limited to 'etc/Makefile.am')

diff --git a/etc/Makefile.am b/etc/Makefile.am
deleted file mode 100644
index 148f7015..00000000
--- a/etc/Makefile.am
+++ /dev/null
@@ -1,117 +0,0 @@
-## Licensed under the Apache License, Version 2.0 (the "License"); you may not
-## use this file except in compliance with the License. You may obtain a copy of
-## the License at
-##
-##   http://www.apache.org/licenses/LICENSE-2.0
-##
-## Unless required by applicable law or agreed to in writing, software
-## distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-## WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-## License for the specific language governing permissions and limitations under
-## the License.
-
-SUBDIRS = couchdb default init launchd logrotate.d windows
-
-default_sysconf_data = logrotate.d/couchdb
-
-if INIT
-init_sysconf_data = default/couchdb
-init_DATA = init/couchdb
-endif
-
-if LAUNCHD
-launchd_DATA = launchd/org.apache.couchdb.plist
-endif
-
-nobase_sysconf_DATA = $(default_sysconf_data) $(init_sysconf_data)
-
-EXTRA_DIST = \
-    default/couchdb \
-    windows/couchdb.iss.tpl \
-    windows/README.txt.tpl
-
-if WINDOWS
-EXTRA_DIST += \
-    windows/setup-couchdb-@version@.exe.md5 \
-    windows/setup-couchdb-@version@.exe.sha
-endif
-
-CLEANFILES = $(init_DATA) $(default_sysconf_data) $(launchd_DATA)
-
-transform = @program_transform_name@
-couchdb_command_name = `echo couchdb | sed '$(transform)'`
-
-init/couchdb: init/couchdb.tpl
-	if test "$(mkdir_p)"; then \
-	    $(mkdir_p) init; \
-	else \
-	    if test ! -d init; then \
-	        mkdir init; \
-	    fi \
-	fi
-	sed -e "s|%configure_input%|$@. Generated from $< by configure.|" \
-	    -e "s|%bindir%|$(bindir)|" \
-	    -e "s|%sysconfdir%|$(sysconfdir)|" \
-	    -e "s|%localstaterundir%|$(localstaterundir)|" \
-	    -e "s|%couchdb_command_name%|$(couchdb_command_name)|" \
-	< $< > $@
-
-logrotate.d/couchdb: logrotate.d/couchdb.tpl
-	sed -e "s|%localstatelogdir%|@localstatelogdir@|g" < $< > $@
-
-launchd/org.apache.couchdb.plist: launchd/org.apache.couchdb.plist.tpl
-	if test "$(mkdir_p)"; then \
-	    $(mkdir_p) launchd; \
-	else \
-	    if test ! -d launchd; then \
-	        mkdir launchd; \
-	    fi \
-	fi
-	sed -e "s|%configure_input%|$@. Generated from $< by configure.|" \
-	    -e "s|%bindir%|$(bindir)|" \
-	    -e "s|%couchdb_command_name%|$(couchdb_command_name)|" \
-	< $< > $@
-
-if WINDOWS
-
-# README.txt has \n line endings in the repo and must have \r\n
-# when installed as notepad is used to view it.
-# Also: the targets below don't seem to update after an svn-up (which
-# changes the version string in the generated files) so we trick make
-# into always building it with the FORCE pattern...
-windows/README.txt: windows/README.txt.tpl FORCE
-	sed -e "s|%package_name%|@package_name@|g" \
-	    -e "s|%version%|@version@|g" \
-	< $< | unix2dos > $@
-
-windows/couchdb.iss: windows/couchdb.iss.tpl FORCE
-	sed -e "s|%configure_input%|$@. Generated from $< by configure.|" \
-	    -e "s|%package_name%|@package_name@|g" \
-	    -e "s|%locallibbindir%|`cygpath -m @locallibbindir@`|g" \
-	    -e "s|%version%|@version@|g" \
-	    -e "s|%erts_version%|`$(ERL) -version 2>&1 | $(SED) 's/[^0-9\.]//g'`|g" \
-	    -e "s|%openssl_bin_dir%|@openssl_bin_dir@|g" \
-	    -e "s|%msvc_redist_dir%|@msvc_redist_dir@|g" \
-	    -e "s|%msvc_redist_name%|@msvc_redist_name@|g" \
-	< $< > $@
-
-# The installer depends on all files, not just the source .iss file,
-# so we trick make into always building it with the FORCE pattern...
-windows/setup-couchdb-@version@.exe: windows/couchdb.iss windows/README.txt FORCE
-	"$(INNO_COMPILER_EXECUTABLE)" /q $<
-	@echo Windows Installer is at: `cygpath -a -w windows/setup-couchdb-@version@.exe`
-
-windows/setup-couchdb-@version@.exe.md5: windows/setup-couchdb-@version@.exe
-	cd windows && md5sum ./$(<F) > $(@F)
-
-windows/setup-couchdb-@version@.exe.sha: windows/setup-couchdb-@version@.exe
-	cd windows && sha1sum ./$(<F) > $(@F)
-
-FORCE:
-
-endif
-
-install-data-hook:
-	if test -n "$(init_DATA)"; then \
-	    chmod +x "$(DESTDIR)$(initdir)/couchdb"; \
-	fi
-- 
cgit v1.2.3