From 394451dbae3e71282611058e00b5fd16c865f147 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Parm=C3=A9nides=20GV?= <parmegv@sdf.org>
Date: Fri, 26 Sep 2014 09:46:26 +0200
Subject: Revert "Updated native subprojects from ics-openvpn."

This reverts commit d0e7ba3029b2fd42582413aa95773fe7dbdede90.

I'll postpone this work for the next cycle, it's not trivial because it doesn't link properly.
---
 app/openssl/crypto/sha/asm/sha256-armv4.pl | 585 ++++-------------------------
 1 file changed, 70 insertions(+), 515 deletions(-)

(limited to 'app/openssl/crypto/sha/asm/sha256-armv4.pl')

diff --git a/app/openssl/crypto/sha/asm/sha256-armv4.pl b/app/openssl/crypto/sha/asm/sha256-armv4.pl
index 505ca8f3..9c84e8d9 100644
--- a/app/openssl/crypto/sha/asm/sha256-armv4.pl
+++ b/app/openssl/crypto/sha/asm/sha256-armv4.pl
@@ -1,7 +1,7 @@
 #!/usr/bin/env perl
 
 # ====================================================================
-# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.
@@ -21,27 +21,15 @@
 # February 2011.
 #
 # Profiler-assisted and platform-specific optimization resulted in 16%
-# improvement on Cortex A8 core and ~15.4 cycles per processed byte.
-
-# September 2013.
-#
-# Add NEON implementation. On Cortex A8 it was measured to process one
-# byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon
-# S4 does it in 12.5 cycles too, but it's 50% faster than integer-only
-# code (meaning that latter performs sub-optimally, nothing was done
-# about it).
-
-# May 2014.
-#
-# Add ARMv8 code path performing at 2.0 cpb on Apple A7.
+# improvement on Cortex A8 core and ~17 cycles per processed byte.
 
 while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
 open STDOUT,">$output";
 
 $ctx="r0";	$t0="r0";
-$inp="r1";	$t4="r1";
+$inp="r1";	$t3="r1";
 $len="r2";	$t1="r2";
-$T1="r3";	$t3="r3";
+$T1="r3";
 $A="r4";
 $B="r5";
 $C="r6";
@@ -64,88 +52,71 @@ my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
 
 $code.=<<___ if ($i<16);
 #if __ARM_ARCH__>=7
-	@ ldr	$t1,[$inp],#4			@ $i
-# if $i==15
-	str	$inp,[sp,#17*4]			@ make room for $t4
-# endif
-	eor	$t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`
-	add	$a,$a,$t2			@ h+=Maj(a,b,c) from the past
-	eor	$t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]`	@ Sigma1(e)
-	rev	$t1,$t1
+	ldr	$T1,[$inp],#4
 #else
-	@ ldrb	$t1,[$inp,#3]			@ $i
-	add	$a,$a,$t2			@ h+=Maj(a,b,c) from the past
+	ldrb	$T1,[$inp,#3]			@ $i
 	ldrb	$t2,[$inp,#2]
-	ldrb	$t0,[$inp,#1]
-	orr	$t1,$t1,$t2,lsl#8
-	ldrb	$t2,[$inp],#4
-	orr	$t1,$t1,$t0,lsl#16
-# if $i==15
-	str	$inp,[sp,#17*4]			@ make room for $t4
-# endif
-	eor	$t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`
-	orr	$t1,$t1,$t2,lsl#24
-	eor	$t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]`	@ Sigma1(e)
+	ldrb	$t1,[$inp,#1]
+	ldrb	$t0,[$inp],#4
+	orr	$T1,$T1,$t2,lsl#8
+	orr	$T1,$T1,$t1,lsl#16
+	orr	$T1,$T1,$t0,lsl#24
 #endif
 ___
 $code.=<<___;
+	mov	$t0,$e,ror#$Sigma1[0]
 	ldr	$t2,[$Ktbl],#4			@ *K256++
-	add	$h,$h,$t1			@ h+=X[i]
-	str	$t1,[sp,#`$i%16`*4]
+	eor	$t0,$t0,$e,ror#$Sigma1[1]
 	eor	$t1,$f,$g
-	add	$h,$h,$t0,ror#$Sigma1[0]	@ h+=Sigma1(e)
+#if $i>=16
+	add	$T1,$T1,$t3			@ from BODY_16_xx
+#elif __ARM_ARCH__>=7 && defined(__ARMEL__)
+	rev	$T1,$T1
+#endif
+#if $i==15
+	str	$inp,[sp,#17*4]			@ leave room for $t3
+#endif
+	eor	$t0,$t0,$e,ror#$Sigma1[2]	@ Sigma1(e)
 	and	$t1,$t1,$e
-	add	$h,$h,$t2			@ h+=K256[i]
+	str	$T1,[sp,#`$i%16`*4]
+	add	$T1,$T1,$t0
 	eor	$t1,$t1,$g			@ Ch(e,f,g)
-	eor	$t0,$a,$a,ror#`$Sigma0[1]-$Sigma0[0]`
-	add	$h,$h,$t1			@ h+=Ch(e,f,g)
-#if $i==31
-	and	$t2,$t2,#0xff
-	cmp	$t2,#0xf2			@ done?
+	add	$T1,$T1,$h
+	mov	$h,$a,ror#$Sigma0[0]
+	add	$T1,$T1,$t1
+	eor	$h,$h,$a,ror#$Sigma0[1]
+	add	$T1,$T1,$t2
+	eor	$h,$h,$a,ror#$Sigma0[2]		@ Sigma0(a)
+#if $i>=15
+	ldr	$t3,[sp,#`($i+2)%16`*4]		@ from BODY_16_xx
 #endif
-#if $i<15
-# if __ARM_ARCH__>=7
-	ldr	$t1,[$inp],#4			@ prefetch
-# else
-	ldrb	$t1,[$inp,#3]
-# endif
-	eor	$t2,$a,$b			@ a^b, b^c in next round
-#else
-	ldr	$t1,[sp,#`($i+2)%16`*4]		@ from future BODY_16_xx
-	eor	$t2,$a,$b			@ a^b, b^c in next round
-	ldr	$t4,[sp,#`($i+15)%16`*4]	@ from future BODY_16_xx
-#endif
-	eor	$t0,$t0,$a,ror#`$Sigma0[2]-$Sigma0[0]`	@ Sigma0(a)
-	and	$t3,$t3,$t2			@ (b^c)&=(a^b)
-	add	$d,$d,$h			@ d+=h
-	eor	$t3,$t3,$b			@ Maj(a,b,c)
-	add	$h,$h,$t0,ror#$Sigma0[0]	@ h+=Sigma0(a)
-	@ add	$h,$h,$t3			@ h+=Maj(a,b,c)
+	orr	$t0,$a,$b
+	and	$t1,$a,$b
+	and	$t0,$t0,$c
+	add	$h,$h,$T1
+	orr	$t0,$t0,$t1			@ Maj(a,b,c)
+	add	$d,$d,$T1
+	add	$h,$h,$t0
 ___
-	($t2,$t3)=($t3,$t2);
 }
 
 sub BODY_16_XX {
 my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
 
 $code.=<<___;
-	@ ldr	$t1,[sp,#`($i+1)%16`*4]		@ $i
-	@ ldr	$t4,[sp,#`($i+14)%16`*4]
-	mov	$t0,$t1,ror#$sigma0[0]
-	add	$a,$a,$t2			@ h+=Maj(a,b,c) from the past
-	mov	$t2,$t4,ror#$sigma1[0]
-	eor	$t0,$t0,$t1,ror#$sigma0[1]
-	eor	$t2,$t2,$t4,ror#$sigma1[1]
-	eor	$t0,$t0,$t1,lsr#$sigma0[2]	@ sigma0(X[i+1])
-	ldr	$t1,[sp,#`($i+0)%16`*4]
-	eor	$t2,$t2,$t4,lsr#$sigma1[2]	@ sigma1(X[i+14])
-	ldr	$t4,[sp,#`($i+9)%16`*4]
-
-	add	$t2,$t2,$t0
-	eor	$t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`	@ from BODY_00_15
-	add	$t1,$t1,$t2
-	eor	$t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]`	@ Sigma1(e)
-	add	$t1,$t1,$t4			@ X[i]
+	@ ldr	$t3,[sp,#`($i+1)%16`*4]		@ $i
+	ldr	$t2,[sp,#`($i+14)%16`*4]
+	mov	$t0,$t3,ror#$sigma0[0]
+	ldr	$T1,[sp,#`($i+0)%16`*4]
+	eor	$t0,$t0,$t3,ror#$sigma0[1]
+	ldr	$t1,[sp,#`($i+9)%16`*4]
+	eor	$t0,$t0,$t3,lsr#$sigma0[2]	@ sigma0(X[i+1])
+	mov	$t3,$t2,ror#$sigma1[0]
+	add	$T1,$T1,$t0
+	eor	$t3,$t3,$t2,ror#$sigma1[1]
+	add	$T1,$T1,$t1
+	eor	$t3,$t3,$t2,lsr#$sigma1[2]	@ sigma1(X[i+14])
+	@ add	$T1,$T1,$t3
 ___
 	&BODY_00_15(@_);
 }
@@ -176,64 +147,46 @@ K256:
 .word	0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
 .word	0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
 .size	K256,.-K256
-.word	0				@ terminator
-.LOPENSSL_armcap:
-.word	OPENSSL_armcap_P-sha256_block_data_order
-.align	5
 
 .global	sha256_block_data_order
 .type	sha256_block_data_order,%function
 sha256_block_data_order:
 	sub	r3,pc,#8		@ sha256_block_data_order
 	add	$len,$inp,$len,lsl#6	@ len to point at the end of inp
-#if __ARM_ARCH__>=7
-	ldr	r12,.LOPENSSL_armcap
-	ldr	r12,[r3,r12]		@ OPENSSL_armcap_P
-	tst	r12,#ARMV8_SHA256
-	bne	.LARMv8
-	tst	r12,#ARMV7_NEON
-	bne	.LNEON
-#endif
 	stmdb	sp!,{$ctx,$inp,$len,r4-r11,lr}
 	ldmia	$ctx,{$A,$B,$C,$D,$E,$F,$G,$H}
-	sub	$Ktbl,r3,#256+32	@ K256
+	sub	$Ktbl,r3,#256		@ K256
 	sub	sp,sp,#16*4		@ alloca(X[16])
 .Loop:
-# if __ARM_ARCH__>=7
-	ldr	$t1,[$inp],#4
-# else
-	ldrb	$t1,[$inp,#3]
-# endif
-	eor	$t3,$B,$C		@ magic
-	eor	$t2,$t2,$t2
 ___
 for($i=0;$i<16;$i++)	{ &BODY_00_15($i,@V); unshift(@V,pop(@V)); }
 $code.=".Lrounds_16_xx:\n";
 for (;$i<32;$i++)	{ &BODY_16_XX($i,@V); unshift(@V,pop(@V)); }
 $code.=<<___;
-	ldreq	$t3,[sp,#16*4]		@ pull ctx
+	and	$t2,$t2,#0xff
+	cmp	$t2,#0xf2
 	bne	.Lrounds_16_xx
 
-	add	$A,$A,$t2		@ h+=Maj(a,b,c) from the past
-	ldr	$t0,[$t3,#0]
-	ldr	$t1,[$t3,#4]
-	ldr	$t2,[$t3,#8]
+	ldr	$T1,[sp,#16*4]		@ pull ctx
+	ldr	$t0,[$T1,#0]
+	ldr	$t1,[$T1,#4]
+	ldr	$t2,[$T1,#8]
 	add	$A,$A,$t0
-	ldr	$t0,[$t3,#12]
+	ldr	$t0,[$T1,#12]
 	add	$B,$B,$t1
-	ldr	$t1,[$t3,#16]
+	ldr	$t1,[$T1,#16]
 	add	$C,$C,$t2
-	ldr	$t2,[$t3,#20]
+	ldr	$t2,[$T1,#20]
 	add	$D,$D,$t0
-	ldr	$t0,[$t3,#24]
+	ldr	$t0,[$T1,#24]
 	add	$E,$E,$t1
-	ldr	$t1,[$t3,#28]
+	ldr	$t1,[$T1,#28]
 	add	$F,$F,$t2
 	ldr	$inp,[sp,#17*4]		@ pull inp
 	ldr	$t2,[sp,#18*4]		@ pull inp+len
 	add	$G,$G,$t0
 	add	$H,$H,$t1
-	stmia	$t3,{$A,$B,$C,$D,$E,$F,$G,$H}
+	stmia	$T1,{$A,$B,$C,$D,$E,$F,$G,$H}
 	cmp	$inp,$t2
 	sub	$Ktbl,$Ktbl,#256	@ rewind Ktbl
 	bne	.Loop
@@ -247,410 +200,12 @@ $code.=<<___;
 	moveq	pc,lr			@ be binary compatible with V4, yet
 	bx	lr			@ interoperable with Thumb ISA:-)
 #endif
-.size	sha256_block_data_order,.-sha256_block_data_order
-___
-######################################################################
-# NEON stuff
-#
-{{{
-my @X=map("q$_",(0..3));
-my ($T0,$T1,$T2,$T3,$T4,$T5)=("q8","q9","q10","q11","d24","d25");
-my $Xfer=$t4;
-my $j=0;
-
-sub Dlo()   { shift=~m|q([1]?[0-9])|?"d".($1*2):"";     }
-sub Dhi()   { shift=~m|q([1]?[0-9])|?"d".($1*2+1):"";   }
-
-sub AUTOLOAD()          # thunk [simplified] x86-style perlasm
-{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
-  my $arg = pop;
-    $arg = "#$arg" if ($arg*1 eq $arg);
-    $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
-}
-
-sub Xupdate()
-{ use integer;
-  my $body = shift;
-  my @insns = (&$body,&$body,&$body,&$body);
-  my ($a,$b,$c,$d,$e,$f,$g,$h);
-
-	&vext_8		($T0,@X[0],@X[1],4);	# X[1..4]
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vext_8		($T1,@X[2],@X[3],4);	# X[9..12]
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vshr_u32	($T2,$T0,$sigma0[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	(@X[0],@X[0],$T1);	# X[0..3] += X[9..12]
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vshr_u32	($T1,$T0,$sigma0[2]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vsli_32	($T2,$T0,32-$sigma0[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vshr_u32	($T3,$T0,$sigma0[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&veor		($T1,$T1,$T2);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vsli_32	($T3,$T0,32-$sigma0[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T4,&Dhi(@X[3]),$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&veor		($T1,$T1,$T3);		# sigma0(X[1..4])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vsli_32	($T4,&Dhi(@X[3]),32-$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T5,&Dhi(@X[3]),$sigma1[2]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	(@X[0],@X[0],$T1);	# X[0..3] += sigma0(X[1..4])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &veor		($T5,$T5,$T4);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T4,&Dhi(@X[3]),$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vsli_32	($T4,&Dhi(@X[3]),32-$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &veor		($T5,$T5,$T4);		# sigma1(X[14..15])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	(&Dlo(@X[0]),&Dlo(@X[0]),$T5);# X[0..1] += sigma1(X[14..15])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T4,&Dlo(@X[0]),$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vsli_32	($T4,&Dlo(@X[0]),32-$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T5,&Dlo(@X[0]),$sigma1[2]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &veor		($T5,$T5,$T4);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T4,&Dlo(@X[0]),$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vld1_32	("{$T0}","[$Ktbl,:128]!");
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vsli_32	($T4,&Dlo(@X[0]),32-$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &veor		($T5,$T5,$T4);		# sigma1(X[16..17])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	(&Dhi(@X[0]),&Dhi(@X[0]),$T5);# X[2..3] += sigma1(X[16..17])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	($T0,$T0,@X[0]);
-	 while($#insns>=2) { eval(shift(@insns)); }
-	&vst1_32	("{$T0}","[$Xfer,:128]!");
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-
-	push(@X,shift(@X));		# "rotate" X[]
-}
-
-sub Xpreload()
-{ use integer;
-  my $body = shift;
-  my @insns = (&$body,&$body,&$body,&$body);
-  my ($a,$b,$c,$d,$e,$f,$g,$h);
-
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vld1_32	("{$T0}","[$Ktbl,:128]!");
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vrev32_8	(@X[0],@X[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	($T0,$T0,@X[0]);
-	 foreach (@insns) { eval; }	# remaining instructions
-	&vst1_32	("{$T0}","[$Xfer,:128]!");
-
-	push(@X,shift(@X));		# "rotate" X[]
-}
-
-sub body_00_15 () {
-	(
-	'($a,$b,$c,$d,$e,$f,$g,$h)=@V;'.
-	'&add	($h,$h,$t1)',			# h+=X[i]+K[i]
-	'&eor	($t1,$f,$g)',
-	'&eor	($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))',
-	'&add	($a,$a,$t2)',			# h+=Maj(a,b,c) from the past
-	'&and	($t1,$t1,$e)',
-	'&eor	($t2,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))',	# Sigma1(e)
-	'&eor	($t0,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))',
-	'&eor	($t1,$t1,$g)',			# Ch(e,f,g)
-	'&add	($h,$h,$t2,"ror#$Sigma1[0]")',	# h+=Sigma1(e)
-	'&eor	($t2,$a,$b)',			# a^b, b^c in next round
-	'&eor	($t0,$t0,$a,"ror#".($Sigma0[2]-$Sigma0[0]))',	# Sigma0(a)
-	'&add	($h,$h,$t1)',			# h+=Ch(e,f,g)
-	'&ldr	($t1,sprintf "[sp,#%d]",4*(($j+1)&15))	if (($j&15)!=15);'.
-	'&ldr	($t1,"[$Ktbl]")				if ($j==15);'.
-	'&ldr	($t1,"[sp,#64]")			if ($j==31)',
-	'&and	($t3,$t3,$t2)',			# (b^c)&=(a^b)
-	'&add	($d,$d,$h)',			# d+=h
-	'&add	($h,$h,$t0,"ror#$Sigma0[0]");'.	# h+=Sigma0(a)
-	'&eor	($t3,$t3,$b)',			# Maj(a,b,c)
-	'$j++;	unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);'
-	)
-}
-
-$code.=<<___;
-#if __ARM_ARCH__>=7
-.fpu	neon
-
-.type	sha256_block_data_order_neon,%function
-.align	4
-sha256_block_data_order_neon:
-.LNEON:
-	stmdb	sp!,{r4-r12,lr}
-
-	mov	$t2,sp
-	sub	sp,sp,#16*4+16		@ alloca
-	sub	$Ktbl,r3,#256+32	@ K256
-	bic	sp,sp,#15		@ align for 128-bit stores
-
-	vld1.8		{@X[0]},[$inp]!
-	vld1.8		{@X[1]},[$inp]!
-	vld1.8		{@X[2]},[$inp]!
-	vld1.8		{@X[3]},[$inp]!
-	vld1.32		{$T0},[$Ktbl,:128]!
-	vld1.32		{$T1},[$Ktbl,:128]!
-	vld1.32		{$T2},[$Ktbl,:128]!
-	vld1.32		{$T3},[$Ktbl,:128]!
-	vrev32.8	@X[0],@X[0]		@ yes, even on
-	str		$ctx,[sp,#64]
-	vrev32.8	@X[1],@X[1]		@ big-endian
-	str		$inp,[sp,#68]
-	mov		$Xfer,sp
-	vrev32.8	@X[2],@X[2]
-	str		$len,[sp,#72]
-	vrev32.8	@X[3],@X[3]
-	str		$t2,[sp,#76]		@ save original sp
-	vadd.i32	$T0,$T0,@X[0]
-	vadd.i32	$T1,$T1,@X[1]
-	vst1.32		{$T0},[$Xfer,:128]!
-	vadd.i32	$T2,$T2,@X[2]
-	vst1.32		{$T1},[$Xfer,:128]!
-	vadd.i32	$T3,$T3,@X[3]
-	vst1.32		{$T2},[$Xfer,:128]!
-	vst1.32		{$T3},[$Xfer,:128]!
-
-	ldmia		$ctx,{$A-$H}
-	sub		$Xfer,$Xfer,#64
-	ldr		$t1,[sp,#0]
-	eor		$t2,$t2,$t2
-	eor		$t3,$B,$C
-	b		.L_00_48
-
-.align	4
-.L_00_48:
-___
-	&Xupdate(\&body_00_15);
-	&Xupdate(\&body_00_15);
-	&Xupdate(\&body_00_15);
-	&Xupdate(\&body_00_15);
-$code.=<<___;
-	teq	$t1,#0				@ check for K256 terminator
-	ldr	$t1,[sp,#0]
-	sub	$Xfer,$Xfer,#64
-	bne	.L_00_48
-
-	ldr		$inp,[sp,#68]
-	ldr		$t0,[sp,#72]
-	sub		$Ktbl,$Ktbl,#256	@ rewind $Ktbl
-	teq		$inp,$t0
-	subeq		$inp,$inp,#64		@ avoid SEGV
-	vld1.8		{@X[0]},[$inp]!		@ load next input block
-	vld1.8		{@X[1]},[$inp]!
-	vld1.8		{@X[2]},[$inp]!
-	vld1.8		{@X[3]},[$inp]!
-	strne		$inp,[sp,#68]
-	mov		$Xfer,sp
-___
-	&Xpreload(\&body_00_15);
-	&Xpreload(\&body_00_15);
-	&Xpreload(\&body_00_15);
-	&Xpreload(\&body_00_15);
-$code.=<<___;
-	ldr	$t0,[$t1,#0]
-	add	$A,$A,$t2			@ h+=Maj(a,b,c) from the past
-	ldr	$t2,[$t1,#4]
-	ldr	$t3,[$t1,#8]
-	ldr	$t4,[$t1,#12]
-	add	$A,$A,$t0			@ accumulate
-	ldr	$t0,[$t1,#16]
-	add	$B,$B,$t2
-	ldr	$t2,[$t1,#20]
-	add	$C,$C,$t3
-	ldr	$t3,[$t1,#24]
-	add	$D,$D,$t4
-	ldr	$t4,[$t1,#28]
-	add	$E,$E,$t0
-	str	$A,[$t1],#4
-	add	$F,$F,$t2
-	str	$B,[$t1],#4
-	add	$G,$G,$t3
-	str	$C,[$t1],#4
-	add	$H,$H,$t4
-	str	$D,[$t1],#4
-	stmia	$t1,{$E-$H}
-
-	movne	$Xfer,sp
-	ldrne	$t1,[sp,#0]
-	eorne	$t2,$t2,$t2
-	ldreq	sp,[sp,#76]			@ restore original sp
-	eorne	$t3,$B,$C
-	bne	.L_00_48
-
-	ldmia	sp!,{r4-r12,pc}
-.size	sha256_block_data_order_neon,.-sha256_block_data_order_neon
-#endif
-___
-}}}
-######################################################################
-# ARMv8 stuff
-#
-{{{
-my ($ABCD,$EFGH,$abcd)=map("q$_",(0..2));
-my @MSG=map("q$_",(8..11));
-my ($W0,$W1,$ABCD_SAVE,$EFGH_SAVE)=map("q$_",(12..15));
-my $Ktbl="r3";
-
-$code.=<<___;
-#if __ARM_ARCH__>=7
-.type	sha256_block_data_order_armv8,%function
-.align	5
-sha256_block_data_order_armv8:
-.LARMv8:
-	vld1.32	{$ABCD,$EFGH},[$ctx]
-	sub	$Ktbl,r3,#sha256_block_data_order-K256
-
-.Loop_v8:
-	vld1.8		{@MSG[0]-@MSG[1]},[$inp]!
-	vld1.8		{@MSG[2]-@MSG[3]},[$inp]!
-	vld1.32		{$W0},[$Ktbl]!
-	vrev32.8	@MSG[0],@MSG[0]
-	vrev32.8	@MSG[1],@MSG[1]
-	vrev32.8	@MSG[2],@MSG[2]
-	vrev32.8	@MSG[3],@MSG[3]
-	vmov		$ABCD_SAVE,$ABCD	@ offload
-	vmov		$EFGH_SAVE,$EFGH
-	teq		$inp,$len
-___
-for($i=0;$i<12;$i++) {
-$code.=<<___;
-	vld1.32		{$W1},[$Ktbl]!
-	vadd.i32	$W0,$W0,@MSG[0]
-	sha256su0	@MSG[0],@MSG[1]
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W0
-	sha256h2	$EFGH,$abcd,$W0
-	sha256su1	@MSG[0],@MSG[2],@MSG[3]
-___
-	($W0,$W1)=($W1,$W0);	push(@MSG,shift(@MSG));
-}
-$code.=<<___;
-	vld1.32		{$W1},[$Ktbl]!
-	vadd.i32	$W0,$W0,@MSG[0]
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W0
-	sha256h2	$EFGH,$abcd,$W0
-
-	vld1.32		{$W0},[$Ktbl]!
-	vadd.i32	$W1,$W1,@MSG[1]
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W1
-	sha256h2	$EFGH,$abcd,$W1
-
-	vld1.32		{$W1},[$Ktbl]
-	vadd.i32	$W0,$W0,@MSG[2]
-	sub		$Ktbl,$Ktbl,#256-16	@ rewind
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W0
-	sha256h2	$EFGH,$abcd,$W0
-
-	vadd.i32	$W1,$W1,@MSG[3]
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W1
-	sha256h2	$EFGH,$abcd,$W1
-
-	vadd.i32	$ABCD,$ABCD,$ABCD_SAVE
-	vadd.i32	$EFGH,$EFGH,$EFGH_SAVE
-	bne		.Loop_v8
-
-	vst1.32		{$ABCD,$EFGH},[$ctx]
-
-	ret		@ bx lr
-.size	sha256_block_data_order_armv8,.-sha256_block_data_order_armv8
-#endif
-___
-}}}
-$code.=<<___;
-.asciz  "SHA256 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
+.size   sha256_block_data_order,.-sha256_block_data_order
+.asciz  "SHA256 block transform for ARMv4, CRYPTOGAMS by <appro\@openssl.org>"
 .align	2
-.comm   OPENSSL_armcap_P,4,4
 ___
 
-{   my  %opcode = (
-	"sha256h"	=> 0xf3000c40,	"sha256h2"	=> 0xf3100c40,
-	"sha256su0"	=> 0xf3ba03c0,	"sha256su1"	=> 0xf3200c40	);
-
-    sub unsha256 {
-	my ($mnemonic,$arg)=@_;
-
-	if ($arg =~ m/q([0-9]+)(?:,\s*q([0-9]+))?,\s*q([0-9]+)/o) {
-	    my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19)
-					 |(($2&7)<<17)|(($2&8)<<4)
-					 |(($3&7)<<1) |(($3&8)<<2);
-	    # since ARMv7 instructions are always encoded little-endian.
-	    # correct solution is to use .inst directive, but older
-	    # assemblers don't implement it:-(
-	    sprintf ".byte\t0x%02x,0x%02x,0x%02x,0x%02x\t@ %s %s",
-			$word&0xff,($word>>8)&0xff,
-			($word>>16)&0xff,($word>>24)&0xff,
-			$mnemonic,$arg;
-	}
-    }
-}
-
-foreach (split($/,$code)) {
-
-	s/\`([^\`]*)\`/eval $1/geo;
-
-	s/\b(sha256\w+)\s+(q.*)/unsha256($1,$2)/geo;
-
-	s/\bret\b/bx	lr/go		or
-	s/\bbx\s+lr\b/.word\t0xe12fff1e/go;	# make it possible to compile with -march=armv4
-
-	print $_,"\n";
-}
-
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm;	# make it possible to compile with -march=armv4
+print $code;
 close STDOUT; # enforce flush
-- 
cgit v1.2.3