8 files changed, 0 insertions, 455 deletions
diff --git a/openvpn/contrib/OCSP_check/OCSP_check.sh b/openvpn/contrib/OCSP_check/OCSP_check.sh
deleted file mode 100644
index 847be450..00000000
--- a/openvpn/contrib/OCSP_check/OCSP_check.sh
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/bin/sh
-
-# Sample script to perform OCSP queries with OpenSSL
-# given a certificate serial number.
-
-# If you run your own CA, you can set up a very simple
-# OCSP server using the -port option to "openssl ocsp".
-
-# Full documentation and examples:
-# http://www.openssl.org/docs/apps/ocsp.html
-
-
-# Edit the following values to suit your needs
-
-# OCSP responder URL (mandatory)
-# YOU MUST UNCOMMENT ONE OF THESE AND SET IT TO A VALID SERVER
-#ocsp_url="http://ocsp.example.com/"
-#ocsp_url="https://ocsp.secure.example.com/"
-
-# Path to issuer certificate (mandatory)
-# YOU MUST SET THIS TO THE PATH TO THE CA CERTIFICATE
-issuer="/path/to/CAcert.crt"
-
-# use a nonce in the query, set to "-no_nonce" to not use it
-nonce="-nonce"
-
-# Verify the response
-# YOU MUST SET THIS TO THE PATH TO THE RESPONSE VERIFICATION CERT
-verify="/path/to/CAcert.crt"
-
-# Depth in the certificate chain where the cert to verify is.
-# Set to -1 to run the verification at every level (NOTE that
-# in that case you need a more complex script as the various
-# parameters for the query will likely be different at each level)
-# "0" is the usual value here, where the client certificate is
-check_depth=0
-
-cur_depth=$1     # this is the *CURRENT* depth
-common_name=$2   # CN in case you need it
-
-# minimal sanity checks
-
-err=0
-if [ -z "$issuer" ] || [ ! -e "$issuer" ]; then
-  echo "Error: issuer certificate undefined or not found!" >&2
-  err=1
-fi
-
-if [ -z "$verify" ] || [ ! -e "$verify" ]; then
-  echo "Error: verification certificate undefined or not found!" >&2
-  err=1
-fi
-
-if [ -z "$ocsp_url" ]; then
-  echo "Error: OCSP server URL not defined!" >&2
-  err=1
-fi
-
-if [ $err -eq 1 ]; then
-  echo "Did you forget to customize the variables in the script?" >&2
-  exit 1
-fi
-
-# begin
-if [ $check_depth -eq -1 ] || [ $cur_depth -eq $check_depth ]; then
-
-  eval serial="\$tls_serial_${cur_depth}"
-
-  # To successfully complete, the following must happen:
-  #
-  # - The serial number must not be empty
-  # - The exit status of "openssl ocsp" must be zero
-  # - The output of the above command must contain the line
-  #   "0x${serial}: good"
-  #
-  # Everything else fails with exit status 1.
-
-  if [ -n "$serial" ]; then
-
-    # This is only an example; you are encouraged to run this command (without
-    # redirections) manually against your or your CA's OCSP server to see how
-    # it responds, and adapt accordingly.
-    # Sample output that is assumed here:
-    #
-    # Response verify OK
-    # 0x428740A5: good
-    #      This Update: Apr 24 19:38:49 2010 GMT
-    #      Next Update: May  2 14:23:42 2010 GMT
-    #
-    # NOTE: It is needed to check the exit code of OpenSSL explicitly.  OpenSSL
-    #       can in some circumstances give a "good" result if it could not
-    #       reach the the OSCP server.  In this case, the exit code will indicate
-    #       if OpenSSL itself failed or not.  If OpenSSL's exit code is not 0,
-    #       don't trust the OpenSSL status.
-
-    status=$(openssl ocsp -issuer "$issuer" \
-                    "$nonce" \
-                    -CAfile "$verify" \
-                    -url "$ocsp_url" \
-                    -serial "0x${serial}" 2>/dev/null)
-
-    if [ $? -eq 0 ]; then
-      # check that it's good
-      if echo "$status" | grep -Fq "0x${serial}: good"; then
-        exit 0
-      fi
-    fi
-  fi
-  # if we get here, something was wrong
-  exit 1
-fi
diff --git a/openvpn/contrib/README b/openvpn/contrib/README
deleted file mode 100644
index e1a57d0e..00000000
--- a/openvpn/contrib/README
+++ /dev/null
@@ -1,2 +0,0 @@
-This directory contains scripts and patches contributed
-by users.
diff --git a/openvpn/contrib/multilevel-init.patch b/openvpn/contrib/multilevel-init.patch
deleted file mode 100644
index 8d48fbcd..00000000
--- a/openvpn/contrib/multilevel-init.patch
+++ /dev/null
@@ -1,79 +0,0 @@
---- /etc/init.d/openvpn	2004-05-12 20:30:06.000000000 +0200
-+++ openvpn	2004-05-12 20:34:33.000000000 +0200
-@@ -58,13 +58,13 @@
- #     returning success or failure status to caller (James Yonan).
- 
- # Location of openvpn binary
--openvpn="/usr/sbin/openvpn"
-+openvpn=/usr/sbin/openvpn
- 
- # Lockfile
--lock="/var/lock/subsys/openvpn"
-+lock=/var/lock/subsys/openvpn
- 
- # PID directory
--piddir="/var/run/openvpn"
-+piddir=/var/run/openvpn
- 
- # Our working directory
- work=/etc/openvpn
-@@ -106,7 +106,7 @@
- 
- 	if [ -f $lock ]; then
- 	    # we were not shut down correctly
--	    for pidf in `/bin/ls $piddir/*.pid $piddir/*/*.pid 2>/dev/null`; do
-+	    for pidf in `find $piddir -name "*.pid" 2>/dev/null`; do
- 	      if [ -s $pidf ]; then
- 		kill `cat $pidf` >/dev/null 2>&1
- 	      fi
-@@ -116,12 +116,12 @@
- 	    sleep 2
- 	fi
- 
--	rm -f $piddir/*.pid $piddir/*/*.pid
-+	find $piddir -name "*.pid"|xargs rm -f
- 
- 	# Start every .conf in $work and run .sh if exists
- 	errors=0
- 	successes=0
--	for c in `/bin/ls *.conf */*.conf 2>/dev/null`; do
-+	for c in `find * -name "*.conf" 2>/dev/null`; do
- 	    bn=${c%%.conf}
- 	    if [ -f "$bn.sh" ]; then
- 		. $bn.sh
-@@ -147,7 +147,7 @@
- 	;;
-   stop)
- 	echo -n $"Shutting down openvpn: "
--	for pidf in `/bin/ls $piddir/*.pid $piddir/*/*.pid 2>/dev/null`; do
-+	for pidf in `find $piddir -name "*.pid" 2>/dev/null`; do
- 	  if [ -s $pidf ]; then
- 	    kill `cat $pidf` >/dev/null 2>&1
- 	  fi
-@@ -163,7 +163,7 @@
- 	;;
-   reload)
- 	if [ -f $lock ]; then
--	    for pidf in `/bin/ls $piddir/*.pid $piddir/*/*.pid 2>/dev/null`; do
-+	    for pidf in `find $piddir -name "*.pid" 2>/dev/null`; do
- 		if [ -s $pidf ]; then
- 		    kill -HUP `cat $pidf` >/dev/null 2>&1
- 		fi
-@@ -175,7 +175,7 @@
- 	;;
-   reopen)
- 	if [ -f $lock ]; then
--	    for pidf in `/bin/ls $piddir/*.pid $piddir/*/*.pid 2>/dev/null`; do
-+	    for pidf in `find $piddir -name "*.pid" 2>/dev/null`; do
- 		if [ -s $pidf ]; then
- 		    kill -USR1 `cat $pidf` >/dev/null 2>&1
- 		fi
-@@ -195,7 +195,7 @@
- 	;;
-   status)
- 	if [ -f $lock ]; then
--	    for pidf in `/bin/ls $piddir/*.pid $piddir/*/*.pid 2>/dev/null`; do
-+	    for pidf in `find $piddir -name "*.pid" 2>/dev/null`; do
- 		if [ -s $pidf ]; then
- 		    kill -USR2 `cat $pidf` >/dev/null 2>&1
- 		fi
diff --git a/openvpn/contrib/openvpn-fwmarkroute-1.00/README b/openvpn/contrib/openvpn-fwmarkroute-1.00/README
deleted file mode 100644
index 66fe61ad..00000000
--- a/openvpn/contrib/openvpn-fwmarkroute-1.00/README
+++ /dev/null
@@ -1,44 +0,0 @@
-OpenVPN fwmark Routing
-Sean Reifschneider, <jafo@tummy.com>
-Thursday November 27, 2003
-==========================
-
-These scripts can be used with OpenVPN up and down scripts to set up
-routing on a Linux system such that the VPN traffic is sent via normal
-network connectivity, but other traffic to that network runs over the VPN.
-The idea is to allow encryption of data to the network the remote host is
-on, without interfering with the VPN traffic.  You can't simply add a route
-to the remote network, becaues that will cause the VPN traffic to also try
-to run over the VPN, and breaks the VPN.
-
-These scripts use the Linux "fwmark" iptables rules to specify routing
-based not only on IP address, but also by port and protocol.  This allows
-you to effectively say "if the packet is to this IP address on this port
-using this protocol, then use the normal default gateway, otherwise use the
-VPN gateway.
-
-This is set up on the client VPN system, not the VPN server.  These scripts
-also set up all ICMP echo-responses to run across the VPN.  You can
-comment the lines in the scripts to disable this, but I find this useful
-at coffee shops which have networks that block ICMP.
-
-To configure this, you need to set up these scripts as your up and down
-scripts in the config file.  You will need to set these values in the
-config file:
-
-   up /etc/openvpn/fwmarkroute.up
-   down /etc/openvpn/fwmarkroute.down
-   up-restart
-   up-delay
-
-   setenv remote_netmask_bits 24
-
-Note: For this to work, you can't set the "user" or "group" config options,
-because then the scripts will not run as root.
-
-The last setting allows you to control the size of the network the remote
-system is on.  The remote end has to be set up to route, probably with
-masquerading or NAT.  The network this netmask relates to is calculated
-using the value of "remote" in the conf file.
-
-Sean
diff --git a/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.down b/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.down
deleted file mode 100755
index 87d67d4d..00000000
--- a/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.down
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh
-#
-#  Bring down vpn routing.
-
-#  calculate the network address
-remote_network=`ipcalc -n "$remote"/"$remote_netmask_bits"`
-remote_network="${remote_network#*=}"
-
-#  clear routing via VPN
-ip route del "$remote_network"/"$remote_netmask_bits" via "$5" table vpn.out
-ip route del table vpnonly.out via "$5"
-iptables -D OUTPUT -t mangle -p "$proto" \
-		-d "$remote_network"/"$remote_netmask_bits" \
-		--dport "$remote_port" -j ACCEPT
-iptables -D OUTPUT -t mangle -d "$remote" -j MARK --set-mark 2
-
-#  undo the ICMP ping tunneling
-iptables -D OUTPUT -t mangle --protocol icmp --icmp-type echo-request \
-		-j MARK --set-mark 3
-
-#  flush route cache
-ip route flush cache
diff --git a/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.up b/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.up
deleted file mode 100755
index 661ec313..00000000
--- a/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.up
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/sh
-#
-#  Bring up vpn routing.
-
-#  calculate the network address
-remote_network=`ipcalc -n "$remote"/"$remote_netmask_bits"`
-remote_network="${remote_network#*=}"
-
-#  add the stuff that doesn't change if it's not already there
-grep -q '^202 ' /etc/iproute2/rt_tables 
-if [ "$?" -ne 0 ]
-then
-	echo 202 vpn.out >> /etc/iproute2/rt_tables
-fi
-grep -q '^203 ' /etc/iproute2/rt_tables 
-if [ "$?" -ne 0 ]
-then
-	echo 203 vpnonly.out >> /etc/iproute2/rt_tables
-fi
-ip rule ls | grep -q 'lookup vpn.out *$'
-if [ "$?" -ne 0 ]
-then
-	ip rule add fwmark 2 table vpn.out
-fi
-ip rule ls | grep -q 'lookup vpnonly.out *$'
-if [ "$?" -ne 0 ]
-then
-	ip rule add fwmark 3 table vpnonly.out
-fi
-
-#  route VPN traffic using the normal table
-iptables -A OUTPUT -t mangle -p "$proto" -d "$remote" --dport "$remote_port" \
-		-j ACCEPT
-
-#  route all other traffic to that host via VPN
-iptables -A OUTPUT -t mangle -d "$remote_network"/"$remote_netmask_bits" \
-		-j MARK --set-mark 2
-
-#  route all ICMP pings over the VPN
-iptables -A OUTPUT -t mangle --protocol icmp --icmp-type echo-request \
-		-j MARK --set-mark 3
-
-#  NAT traffic going over the VPN, so it doesn't have an unknown address
-iptables -t nat -A POSTROUTING -o "$1" -j SNAT --to-source "$4"
-
-#  add routing commands
-ip route add "$remote_network"/"$remote_netmask_bits" via "$5" table vpn.out
-ip route add table vpnonly.out via "$5"
-ip route flush cache
diff --git a/openvpn/contrib/pull-resolv-conf/client.down b/openvpn/contrib/pull-resolv-conf/client.down
deleted file mode 100644
index 05f2d4d5..00000000
--- a/openvpn/contrib/pull-resolv-conf/client.down
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/sh
-
-# Copyright (c) 2005-2010 OpenVPN Technologies, Inc.
-# Licensed under the GPL version 2
-
-# First version by Jesse Adelman
-# someone at boldandbusted dink com
-# http://www.boldandbusted.com/
-
-# PURPOSE: This script automatically removes the /etc/resolv.conf entries previously
-# set by the companion script "client.up".
-
-# INSTALL NOTES:
-# Place this in /etc/openvpn/client.down
-# Then, add the following to your /etc/openvpn/<clientconfig>.conf:
-#   client
-#   up /etc/openvpn/client.up
-#   down /etc/openvpn/client.down
-# Next, "chmod a+x /etc/openvpn/client.down"
-
-# USAGE NOTES:
-# Note that this script is best served with the companion "client.up"
-# script.
-
-# Tested under Debian lenny with OpenVPN 2.1_rc11
-# It should work with any UNIX with a POSIX sh, /etc/resolv.conf or resolvconf
-
-# This runs with the context of the OpenVPN UID/GID 
-# at the time of execution. This generally means that
-# the client "up" script will run fine, but the "down" script
-# will require the use of the OpenVPN "down-root" plugin
-# which is in the plugins/ directory of the OpenVPN source tree
-
-# A horrid work around, from a security perspective,
-# is to run OpenVPN as root. THIS IS NOT RECOMMENDED. You have
-# been WARNED.
-PATH=/bin:/usr/bin:/usr/local/bin:/sbin:/usr/sbin:/usr/local/sbin
-
-if type resolvconf >/dev/null 2>&1; then
-  resolvconf -d "${1}" -f
-elif [ -e /etc/resolv.conf.ovpnsave ] ; then
-  # cp + rm rather than mv in case it's a symlink
-  cp /etc/resolv.conf.ovpnsave /etc/resolv.conf
-  rm -f /etc/resolv.conf.ovpnsave
-fi
-
-exit 0
diff --git a/openvpn/contrib/pull-resolv-conf/client.up b/openvpn/contrib/pull-resolv-conf/client.up
deleted file mode 100644
index b28d4d19..00000000
--- a/openvpn/contrib/pull-resolv-conf/client.up
+++ /dev/null
@@ -1,101 +0,0 @@
-#!/bin/sh
-
-# Copyright (c) 2005-2010 OpenVPN Technologies, Inc.
-# Licensed under the GPL version 2
-
-# First version by Jesse Adelman
-# someone at boldandbusted dink com
-# http://www.boldandbusted.com/
-
-# PURPOSE: This script automatically sets the proper /etc/resolv.conf entries
-# as pulled down from an OpenVPN server.
-
-# INSTALL NOTES:
-# Place this in /etc/openvpn/client.up
-# Then, add the following to your /etc/openvpn/<clientconfig>.conf:
-#   client
-#   up /etc/openvpn/client.up
-# Next, "chmod a+x /etc/openvpn/client.up"
-
-# USAGE NOTES:
-# Note that this script is best served with the companion "client.down"
-# script.
-
-# Tested under Debian lenny with OpenVPN 2.1_rc11
-# It should work with any UNIX with a POSIX sh, /etc/resolv.conf or resolvconf
-
-# This runs with the context of the OpenVPN UID/GID 
-# at the time of execution. This generally means that
-# the client "up" script will run fine, but the "down" script
-# will require the use of the OpenVPN "down-root" plugin
-# which is in the plugins/ directory of the OpenVPN source tree
-
-# A horrid work around, from a security perspective,
-# is to run OpenVPN as root. THIS IS NOT RECOMMENDED. You have
-# been WARNED.
-PATH=/bin:/usr/bin:/usr/local/bin:/sbin:/usr/sbin:/usr/local/sbin
-
-# init variables
-
-i=1
-domains=
-fopt=
-ndoms=0
-nns=0
-nl='
-'
-
-# $foreign_option_<n> is something like
-# "dhcp-option DOMAIN example.com" (multiple allowed)
-# or
-# "dhcp-option DNS 10.10.10.10" (multiple allowed)
-
-# each DNS option becomes a "nameserver" option in resolv.con
-# if we get one DOMAIN, that becomes "domain" in resolv.conf
-# if we get multiple DOMAINS, those become "search" lines in resolv.conf
-
-while true; do
-  eval fopt=\$foreign_option_${i}
-  [ -z "${fopt}" ] && break
-
-  case ${fopt} in
-		dhcp-option\ DOMAIN\ *)
-           ndoms=$((ndoms + 1))
-           domains="${domains} ${fopt#dhcp-option DOMAIN }"
-           ;;
-		dhcp-option\ DNS\ *)
-           nns=$((nns + 1))
-           if [ $nns -le 3 ]; then
-             dns="${dns}${dns:+$nl}nameserver ${fopt#dhcp-option DNS }"
-           else
-             printf "%s\n" "Too many nameservers - ignoring after third" >&2
-           fi
-           ;;
-        *)
-           printf "%s\n" "Unknown option \"${fopt}\" - ignored" >&2
-           ;;
-	esac
-  i=$((i + 1))
-done
-
-ds=domain
-if [ $ndoms -gt 1 ]; then
-  ds=search
-fi
-
-# This is the complete file - "$domains" has a leading space already
-out="# resolv.conf autogenerated by ${0} (${1})${nl}${dns}${nl}${ds}${domains}"
-
-# use resolvconf if it's available
-if type resolvconf >/dev/null 2>&1; then
-  printf "%s\n" "${out}" | resolvconf -p -a "${1}"
-else
-  # Preserve the existing resolv.conf
-  if [ -e /etc/resolv.conf ] ; then
-    cp /etc/resolv.conf /etc/resolv.conf.ovpnsave
-  fi
-  printf "%s\n" "${out}" > /etc/resolv.conf
-  chmod 644 /etc/resolv.conf
-fi
-
-exit 0