summaryrefslogtreecommitdiff
path: root/openssl/crypto/ripemd
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/crypto/ripemd')
-rw-r--r--openssl/crypto/ripemd/README15
-rw-r--r--openssl/crypto/ripemd/asm/rips.cpp82
-rw-r--r--openssl/crypto/ripemd/asm/rmd-586.pl591
-rw-r--r--openssl/crypto/ripemd/ripemd.h104
-rw-r--r--openssl/crypto/ripemd/rmd160.c127
-rw-r--r--openssl/crypto/ripemd/rmd_dgst.c291
-rw-r--r--openssl/crypto/ripemd/rmd_locl.h150
-rw-r--r--openssl/crypto/ripemd/rmd_one.c78
-rw-r--r--openssl/crypto/ripemd/rmdconst.h399
-rw-r--r--openssl/crypto/ripemd/rmdtest.c145
10 files changed, 0 insertions, 1982 deletions
diff --git a/openssl/crypto/ripemd/README b/openssl/crypto/ripemd/README
deleted file mode 100644
index f1ffc8b1..00000000
--- a/openssl/crypto/ripemd/README
+++ /dev/null
@@ -1,15 +0,0 @@
-RIPEMD-160
-http://www.esat.kuleuven.ac.be/~bosselae/ripemd160.html
-
-This is my implementation of RIPEMD-160. The pentium assember is a little
-off the pace since I only get 1050 cycles, while the best is 1013.
-I have a few ideas for how to get another 20 or so cycles, but at
-this point I will not bother right now. I believe the trick will be
-to remove my 'copy X array onto stack' until inside the RIP1() finctions the
-first time round. To do this I need another register and will only have one
-temporary one. A bit tricky.... I can also cleanup the saving of the 5 words
-after the first half of the calculation. I should read the origional
-value, add then write. Currently I just save the new and read the origioal.
-I then read both at the end. Bad.
-
-eric (20-Jan-1998)
diff --git a/openssl/crypto/ripemd/asm/rips.cpp b/openssl/crypto/ripemd/asm/rips.cpp
deleted file mode 100644
index f7a13677..00000000
--- a/openssl/crypto/ripemd/asm/rips.cpp
+++ /dev/null
@@ -1,82 +0,0 @@
-//
-// gettsc.inl
-//
-// gives access to the Pentium's (secret) cycle counter
-//
-// This software was written by Leonard Janke (janke@unixg.ubc.ca)
-// in 1996-7 and is entered, by him, into the public domain.
-
-#if defined(__WATCOMC__)
-void GetTSC(unsigned long&);
-#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
-#elif defined(__GNUC__)
-inline
-void GetTSC(unsigned long& tsc)
-{
- asm volatile(".byte 15, 49\n\t"
- : "=eax" (tsc)
- :
- : "%edx", "%eax");
-}
-#elif defined(_MSC_VER)
-inline
-void GetTSC(unsigned long& tsc)
-{
- unsigned long a;
- __asm _emit 0fh
- __asm _emit 31h
- __asm mov a, eax;
- tsc=a;
-}
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/ripemd.h>
-
-#define ripemd160_block_x86 ripemd160_block_asm_host_order
-
-extern "C" {
-void ripemd160_block_x86(RIPEMD160_CTX *ctx, unsigned char *buffer,int num);
-}
-
-void main(int argc,char *argv[])
- {
- unsigned char buffer[64*256];
- RIPEMD160_CTX ctx;
- unsigned long s1,s2,e1,e2;
- unsigned char k[16];
- unsigned long data[2];
- unsigned char iv[8];
- int i,num=0,numm;
- int j=0;
-
- if (argc >= 2)
- num=atoi(argv[1]);
-
- if (num == 0) num=16;
- if (num > 250) num=16;
- numm=num+2;
-#if 0
- num*=64;
- numm*=64;
-#endif
-
- for (j=0; j<6; j++)
- {
- for (i=0; i<10; i++) /**/
- {
- ripemd160_block_x86(&ctx,buffer,numm);
- GetTSC(s1);
- ripemd160_block_x86(&ctx,buffer,numm);
- GetTSC(e1);
- GetTSC(s2);
- ripemd160_block_x86(&ctx,buffer,num);
- GetTSC(e2);
- ripemd160_block_x86(&ctx,buffer,num);
- }
- printf("ripemd160 (%d bytes) %d %d (%.2f)\n",num*64,
- e1-s1,e2-s2,(double)((e1-s1)-(e2-s2))/2);
- }
- }
-
diff --git a/openssl/crypto/ripemd/asm/rmd-586.pl b/openssl/crypto/ripemd/asm/rmd-586.pl
deleted file mode 100644
index e8b2bc2d..00000000
--- a/openssl/crypto/ripemd/asm/rmd-586.pl
+++ /dev/null
@@ -1,591 +0,0 @@
-#!/usr/local/bin/perl
-
-# Normal is the
-# ripemd160_block_asm_data_order(RIPEMD160_CTX *c, ULONG *X,int blocks);
-
-$normal=0;
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-push(@INC,"${dir}","${dir}../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],$0);
-
-$A="ecx";
-$B="esi";
-$C="edi";
-$D="ebx";
-$E="ebp";
-$tmp1="eax";
-$tmp2="edx";
-
-$KL1=0x5A827999;
-$KL2=0x6ED9EBA1;
-$KL3=0x8F1BBCDC;
-$KL4=0xA953FD4E;
-$KR0=0x50A28BE6;
-$KR1=0x5C4DD124;
-$KR2=0x6D703EF3;
-$KR3=0x7A6D76E9;
-
-
-@wl=( 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,15,
- 7, 4,13, 1,10, 6,15, 3,12, 0, 9, 5, 2,14,11, 8,
- 3,10,14, 4, 9,15, 8, 1, 2, 7, 0, 6,13,11, 5,12,
- 1, 9,11,10, 0, 8,12, 4,13, 3, 7,15,14, 5, 6, 2,
- 4, 0, 5, 9, 7,12, 2,10,14, 1, 3, 8,11, 6,15,13,
- );
-
-@wr=( 5,14, 7, 0, 9, 2,11, 4,13, 6,15, 8, 1,10, 3,12,
- 6,11, 3, 7, 0,13, 5,10,14,15, 8,12, 4, 9, 1, 2,
- 15, 5, 1, 3, 7,14, 6, 9,11, 8,12, 2,10, 0, 4,13,
- 8, 6, 4, 1, 3,11,15, 0, 5,12, 2,13, 9, 7,10,14,
- 12,15,10, 4, 1, 5, 8, 7, 6, 2,13,14, 0, 3, 9,11,
- );
-
-@sl=( 11,14,15,12, 5, 8, 7, 9,11,13,14,15, 6, 7, 9, 8,
- 7, 6, 8,13,11, 9, 7,15, 7,12,15, 9,11, 7,13,12,
- 11,13, 6, 7,14, 9,13,15,14, 8,13, 6, 5,12, 7, 5,
- 11,12,14,15,14,15, 9, 8, 9,14, 5, 6, 8, 6, 5,12,
- 9,15, 5,11, 6, 8,13,12, 5,12,13,14,11, 8, 5, 6,
- );
-
-@sr=( 8, 9, 9,11,13,15,15, 5, 7, 7, 8,11,14,14,12, 6,
- 9,13,15, 7,12, 8, 9,11, 7, 7,12, 7, 6,15,13,11,
- 9, 7,15,11, 8, 6, 6,14,12,13, 5,14,13,13, 7, 5,
- 15, 5, 8,11,14,14, 6,14, 6, 9,12, 9,12, 5,15, 8,
- 8, 5,12, 9,12, 5,14, 6, 8,13, 6, 5,15,13,11,11,
- );
-
-&ripemd160_block("ripemd160_block_asm_data_order");
-&asm_finish();
-
-sub Xv
- {
- local($n)=@_;
- return(&swtmp($n));
- # tmp on stack
- }
-
-sub Np
- {
- local($p)=@_;
- local(%n)=($A,$E,$B,$A,$C,$B,$D,$C,$E,$D);
- return($n{$p});
- }
-
-sub RIP1
- {
- local($a,$b,$c,$d,$e,$pos,$s,$o,$pos2)=@_;
-
- &comment($p++);
- if ($p & 1)
- {
- #&mov($tmp1, $c) if $o == -1;
- &xor($tmp1, $d) if $o == -1;
- &mov($tmp2, &Xv($pos));
- &xor($tmp1, $b);
- &add($a, $tmp2);
- &rotl($c, 10);
- &add($a, $tmp1);
- &mov($tmp1, &Np($c)); # NEXT
- # XXX
- &rotl($a, $s);
- &add($a, $e);
- }
- else
- {
- &xor($tmp1, $d);
- &mov($tmp2, &Xv($pos));
- &xor($tmp1, $b);
- &add($a, $tmp1);
- &mov($tmp1, &Np($c)) if $o <= 0;
- &mov($tmp1, -1) if $o == 1;
- # XXX if $o == 2;
- &rotl($c, 10);
- &add($a, $tmp2);
- &xor($tmp1, &Np($d)) if $o <= 0;
- &mov($tmp2, &Xv($pos2)) if $o == 1;
- &mov($tmp2, &wparam(0)) if $o == 2;
- &rotl($a, $s);
- &add($a, $e);
- }
- }
-
-sub RIP2
- {
- local($a,$b,$c,$d,$e,$pos,$pos2,$s,$K,$o)=@_;
-
-# XXXXXX
- &comment($p++);
- if ($p & 1)
- {
-# &mov($tmp2, &Xv($pos)) if $o < -1;
-# &mov($tmp1, -1) if $o < -1;
-
- &add($a, $tmp2);
- &mov($tmp2, $c);
- &sub($tmp1, $b);
- &and($tmp2, $b);
- &and($tmp1, $d);
- &or($tmp2, $tmp1);
- &mov($tmp1, &Xv($pos2)) if $o <= 0; # XXXXXXXXXXXXXX
- # XXX
- &rotl($c, 10);
- &lea($a, &DWP($K,$a,$tmp2,1));
- &mov($tmp2, -1) if $o <= 0;
- # XXX
- &rotl($a, $s);
- &add($a, $e);
- }
- else
- {
- # XXX
- &add($a, $tmp1);
- &mov($tmp1, $c);
- &sub($tmp2, $b);
- &and($tmp1, $b);
- &and($tmp2, $d);
- if ($o != 2)
- {
- &or($tmp1, $tmp2);
- &mov($tmp2, &Xv($pos2)) if $o <= 0;
- &mov($tmp2, -1) if $o == 1;
- &rotl($c, 10);
- &lea($a, &DWP($K,$a,$tmp1,1));
- &mov($tmp1, -1) if $o <= 0;
- &sub($tmp2, &Np($c)) if $o == 1;
- } else {
- &or($tmp2, $tmp1);
- &mov($tmp1, &Np($c));
- &rotl($c, 10);
- &lea($a, &DWP($K,$a,$tmp2,1));
- &xor($tmp1, &Np($d));
- }
- &rotl($a, $s);
- &add($a, $e);
- }
- }
-
-sub RIP3
- {
- local($a,$b,$c,$d,$e,$pos,$s,$K,$o,$pos2)=@_;
-
- &comment($p++);
- if ($p & 1)
- {
-# &mov($tmp2, -1) if $o < -1;
-# &sub($tmp2, $c) if $o < -1;
- &mov($tmp1, &Xv($pos));
- &or($tmp2, $b);
- &add($a, $tmp1);
- &xor($tmp2, $d);
- &mov($tmp1, -1) if $o <= 0; # NEXT
- # XXX
- &rotl($c, 10);
- &lea($a, &DWP($K,$a,$tmp2,1));
- &sub($tmp1, &Np($c)) if $o <= 0; # NEXT
- # XXX
- &rotl($a, $s);
- &add($a, $e);
- }
- else
- {
- &mov($tmp2, &Xv($pos));
- &or($tmp1, $b);
- &add($a, $tmp2);
- &xor($tmp1, $d);
- &mov($tmp2, -1) if $o <= 0; # NEXT
- &mov($tmp2, -1) if $o == 1;
- &mov($tmp2, &Xv($pos2)) if $o == 2;
- &rotl($c, 10);
- &lea($a, &DWP($K,$a,$tmp1,1));
- &sub($tmp2, &Np($c)) if $o <= 0; # NEXT
- &mov($tmp1, &Np($d)) if $o == 1;
- &mov($tmp1, -1) if $o == 2;
- &rotl($a, $s);
- &add($a, $e);
- }
- }
-
-sub RIP4
- {
- local($a,$b,$c,$d,$e,$pos,$s,$K,$o)=@_;
-
- &comment($p++);
- if ($p & 1)
- {
-# &mov($tmp2, -1) if $o == -2;
-# &mov($tmp1, $d) if $o == -2;
- &sub($tmp2, $d);
- &and($tmp1, $b);
- &and($tmp2, $c);
- &or($tmp2, $tmp1);
- &mov($tmp1, &Xv($pos));
- &rotl($c, 10);
- &lea($a, &DWP($K,$a,$tmp2));
- &mov($tmp2, -1) unless $o > 0; # NEXT
- # XXX
- &add($a, $tmp1);
- &mov($tmp1, &Np($d)) unless $o > 0; # NEXT
- # XXX
- &rotl($a, $s);
- &add($a, $e);
- }
- else
- {
- &sub($tmp2, $d);
- &and($tmp1, $b);
- &and($tmp2, $c);
- &or($tmp2, $tmp1);
- &mov($tmp1, &Xv($pos));
- &rotl($c, 10);
- &lea($a, &DWP($K,$a,$tmp2));
- &mov($tmp2, -1) if $o == 0; # NEXT
- &mov($tmp2, -1) if $o == 1;
- &mov($tmp2, -1) if $o == 2;
- # XXX
- &add($a, $tmp1);
- &mov($tmp1, &Np($d)) if $o == 0; # NEXT
- &sub($tmp2, &Np($d)) if $o == 1;
- &sub($tmp2, &Np($c)) if $o == 2;
- # XXX
- &rotl($a, $s);
- &add($a, $e);
- }
- }
-
-sub RIP5
- {
- local($a,$b,$c,$d,$e,$pos,$s,$K,$o)=@_;
-
- &comment($p++);
- if ($p & 1)
- {
- &mov($tmp2, -1) if $o == -2;
- &sub($tmp2, $d) if $o == -2;
- &mov($tmp1, &Xv($pos));
- &or($tmp2, $c);
- &add($a, $tmp1);
- &xor($tmp2, $b);
- &mov($tmp1, -1) if $o <= 0;
- # XXX
- &rotl($c, 10);
- &lea($a, &DWP($K,$a,$tmp2,1));
- &sub($tmp1, &Np($d)) if $o <= 0;
- # XXX
- &rotl($a, $s);
- &add($a, $e);
- }
- else
- {
- &mov($tmp2, &Xv($pos));
- &or($tmp1, $c);
- &add($a, $tmp2);
- &xor($tmp1, $b);
- &mov($tmp2, -1) if $o <= 0;
- &mov($tmp2, &wparam(0)) if $o == 1; # Middle code
- &mov($tmp2, -1) if $o == 2;
- &rotl($c, 10);
- &lea($a, &DWP($K,$a,$tmp1,1));
- &sub($tmp2, &Np($d)) if $o <= 0;
- &mov(&swtmp(16), $A) if $o == 1;
- &mov($tmp1, &Np($d)) if $o == 2;
- &rotl($a, $s);
- &add($a, $e);
- }
- }
-
-sub ripemd160_block
- {
- local($name)=@_;
-
- &function_begin_B($name,"",3);
-
- # parameter 1 is the RIPEMD160_CTX structure.
- # A 0
- # B 4
- # C 8
- # D 12
- # E 16
-
- &mov($tmp2, &wparam(0));
- &mov($tmp1, &wparam(1));
- &push("esi");
- &mov($A, &DWP( 0,$tmp2,"",0));
- &push("edi");
- &mov($B, &DWP( 4,$tmp2,"",0));
- &push("ebp");
- &mov($C, &DWP( 8,$tmp2,"",0));
- &push("ebx");
- &stack_push(16+5+6);
- # Special comment about the figure of 6.
- # Idea is to pad the current frame so
- # that the top of the stack gets fairly
- # aligned. Well, as you realize it would
- # always depend on how the frame below is
- # aligned. The good news are that gcc-2.95
- # and later does keep first argument at
- # least double-wise aligned.
- # <appro@fy.chalmers.se>
-
- &set_label("start") unless $normal;
- &comment("");
-
- # &mov($tmp1, &wparam(1)); # Done at end of loop
- # &mov($tmp2, &wparam(0)); # Done at end of loop
-
- for ($z=0; $z<16; $z+=2)
- {
- &mov($D, &DWP( $z*4,$tmp1,"",0));
- &mov($E, &DWP( ($z+1)*4,$tmp1,"",0));
- &mov(&swtmp($z), $D);
- &mov(&swtmp($z+1), $E);
- }
- &mov($tmp1, $C);
- &mov($D, &DWP(12,$tmp2,"",0));
- &mov($E, &DWP(16,$tmp2,"",0));
-
- &RIP1($A,$B,$C,$D,$E,$wl[ 0],$sl[ 0],-1);
- &RIP1($E,$A,$B,$C,$D,$wl[ 1],$sl[ 1],0);
- &RIP1($D,$E,$A,$B,$C,$wl[ 2],$sl[ 2],0);
- &RIP1($C,$D,$E,$A,$B,$wl[ 3],$sl[ 3],0);
- &RIP1($B,$C,$D,$E,$A,$wl[ 4],$sl[ 4],0);
- &RIP1($A,$B,$C,$D,$E,$wl[ 5],$sl[ 5],0);
- &RIP1($E,$A,$B,$C,$D,$wl[ 6],$sl[ 6],0);
- &RIP1($D,$E,$A,$B,$C,$wl[ 7],$sl[ 7],0);
- &RIP1($C,$D,$E,$A,$B,$wl[ 8],$sl[ 8],0);
- &RIP1($B,$C,$D,$E,$A,$wl[ 9],$sl[ 9],0);
- &RIP1($A,$B,$C,$D,$E,$wl[10],$sl[10],0);
- &RIP1($E,$A,$B,$C,$D,$wl[11],$sl[11],0);
- &RIP1($D,$E,$A,$B,$C,$wl[12],$sl[12],0);
- &RIP1($C,$D,$E,$A,$B,$wl[13],$sl[13],0);
- &RIP1($B,$C,$D,$E,$A,$wl[14],$sl[14],0);
- &RIP1($A,$B,$C,$D,$E,$wl[15],$sl[15],1,$wl[16]);
-
- &RIP2($E,$A,$B,$C,$D,$wl[16],$wl[17],$sl[16],$KL1,-1);
- &RIP2($D,$E,$A,$B,$C,$wl[17],$wl[18],$sl[17],$KL1,0);
- &RIP2($C,$D,$E,$A,$B,$wl[18],$wl[19],$sl[18],$KL1,0);
- &RIP2($B,$C,$D,$E,$A,$wl[19],$wl[20],$sl[19],$KL1,0);
- &RIP2($A,$B,$C,$D,$E,$wl[20],$wl[21],$sl[20],$KL1,0);
- &RIP2($E,$A,$B,$C,$D,$wl[21],$wl[22],$sl[21],$KL1,0);
- &RIP2($D,$E,$A,$B,$C,$wl[22],$wl[23],$sl[22],$KL1,0);
- &RIP2($C,$D,$E,$A,$B,$wl[23],$wl[24],$sl[23],$KL1,0);
- &RIP2($B,$C,$D,$E,$A,$wl[24],$wl[25],$sl[24],$KL1,0);
- &RIP2($A,$B,$C,$D,$E,$wl[25],$wl[26],$sl[25],$KL1,0);
- &RIP2($E,$A,$B,$C,$D,$wl[26],$wl[27],$sl[26],$KL1,0);
- &RIP2($D,$E,$A,$B,$C,$wl[27],$wl[28],$sl[27],$KL1,0);
- &RIP2($C,$D,$E,$A,$B,$wl[28],$wl[29],$sl[28],$KL1,0);
- &RIP2($B,$C,$D,$E,$A,$wl[29],$wl[30],$sl[29],$KL1,0);
- &RIP2($A,$B,$C,$D,$E,$wl[30],$wl[31],$sl[30],$KL1,0);
- &RIP2($E,$A,$B,$C,$D,$wl[31],$wl[32],$sl[31],$KL1,1);
-
- &RIP3($D,$E,$A,$B,$C,$wl[32],$sl[32],$KL2,-1);
- &RIP3($C,$D,$E,$A,$B,$wl[33],$sl[33],$KL2,0);
- &RIP3($B,$C,$D,$E,$A,$wl[34],$sl[34],$KL2,0);
- &RIP3($A,$B,$C,$D,$E,$wl[35],$sl[35],$KL2,0);
- &RIP3($E,$A,$B,$C,$D,$wl[36],$sl[36],$KL2,0);
- &RIP3($D,$E,$A,$B,$C,$wl[37],$sl[37],$KL2,0);
- &RIP3($C,$D,$E,$A,$B,$wl[38],$sl[38],$KL2,0);
- &RIP3($B,$C,$D,$E,$A,$wl[39],$sl[39],$KL2,0);
- &RIP3($A,$B,$C,$D,$E,$wl[40],$sl[40],$KL2,0);
- &RIP3($E,$A,$B,$C,$D,$wl[41],$sl[41],$KL2,0);
- &RIP3($D,$E,$A,$B,$C,$wl[42],$sl[42],$KL2,0);
- &RIP3($C,$D,$E,$A,$B,$wl[43],$sl[43],$KL2,0);
- &RIP3($B,$C,$D,$E,$A,$wl[44],$sl[44],$KL2,0);
- &RIP3($A,$B,$C,$D,$E,$wl[45],$sl[45],$KL2,0);
- &RIP3($E,$A,$B,$C,$D,$wl[46],$sl[46],$KL2,0);
- &RIP3($D,$E,$A,$B,$C,$wl[47],$sl[47],$KL2,1);
-
- &RIP4($C,$D,$E,$A,$B,$wl[48],$sl[48],$KL3,-1);
- &RIP4($B,$C,$D,$E,$A,$wl[49],$sl[49],$KL3,0);
- &RIP4($A,$B,$C,$D,$E,$wl[50],$sl[50],$KL3,0);
- &RIP4($E,$A,$B,$C,$D,$wl[51],$sl[51],$KL3,0);
- &RIP4($D,$E,$A,$B,$C,$wl[52],$sl[52],$KL3,0);
- &RIP4($C,$D,$E,$A,$B,$wl[53],$sl[53],$KL3,0);
- &RIP4($B,$C,$D,$E,$A,$wl[54],$sl[54],$KL3,0);
- &RIP4($A,$B,$C,$D,$E,$wl[55],$sl[55],$KL3,0);
- &RIP4($E,$A,$B,$C,$D,$wl[56],$sl[56],$KL3,0);
- &RIP4($D,$E,$A,$B,$C,$wl[57],$sl[57],$KL3,0);
- &RIP4($C,$D,$E,$A,$B,$wl[58],$sl[58],$KL3,0);
- &RIP4($B,$C,$D,$E,$A,$wl[59],$sl[59],$KL3,0);
- &RIP4($A,$B,$C,$D,$E,$wl[60],$sl[60],$KL3,0);
- &RIP4($E,$A,$B,$C,$D,$wl[61],$sl[61],$KL3,0);
- &RIP4($D,$E,$A,$B,$C,$wl[62],$sl[62],$KL3,0);
- &RIP4($C,$D,$E,$A,$B,$wl[63],$sl[63],$KL3,1);
-
- &RIP5($B,$C,$D,$E,$A,$wl[64],$sl[64],$KL4,-1);
- &RIP5($A,$B,$C,$D,$E,$wl[65],$sl[65],$KL4,0);
- &RIP5($E,$A,$B,$C,$D,$wl[66],$sl[66],$KL4,0);
- &RIP5($D,$E,$A,$B,$C,$wl[67],$sl[67],$KL4,0);
- &RIP5($C,$D,$E,$A,$B,$wl[68],$sl[68],$KL4,0);
- &RIP5($B,$C,$D,$E,$A,$wl[69],$sl[69],$KL4,0);
- &RIP5($A,$B,$C,$D,$E,$wl[70],$sl[70],$KL4,0);
- &RIP5($E,$A,$B,$C,$D,$wl[71],$sl[71],$KL4,0);
- &RIP5($D,$E,$A,$B,$C,$wl[72],$sl[72],$KL4,0);
- &RIP5($C,$D,$E,$A,$B,$wl[73],$sl[73],$KL4,0);
- &RIP5($B,$C,$D,$E,$A,$wl[74],$sl[74],$KL4,0);
- &RIP5($A,$B,$C,$D,$E,$wl[75],$sl[75],$KL4,0);
- &RIP5($E,$A,$B,$C,$D,$wl[76],$sl[76],$KL4,0);
- &RIP5($D,$E,$A,$B,$C,$wl[77],$sl[77],$KL4,0);
- &RIP5($C,$D,$E,$A,$B,$wl[78],$sl[78],$KL4,0);
- &RIP5($B,$C,$D,$E,$A,$wl[79],$sl[79],$KL4,1);
-
- # &mov($tmp2, &wparam(0)); # moved into last RIP5
- # &mov(&swtmp(16), $A);
- &mov($A, &DWP( 0,$tmp2,"",0));
- &mov(&swtmp(16+1), $B);
- &mov(&swtmp(16+2), $C);
- &mov($B, &DWP( 4,$tmp2,"",0));
- &mov(&swtmp(16+3), $D);
- &mov($C, &DWP( 8,$tmp2,"",0));
- &mov(&swtmp(16+4), $E);
- &mov($D, &DWP(12,$tmp2,"",0));
- &mov($E, &DWP(16,$tmp2,"",0));
-
- &RIP5($A,$B,$C,$D,$E,$wr[ 0],$sr[ 0],$KR0,-2);
- &RIP5($E,$A,$B,$C,$D,$wr[ 1],$sr[ 1],$KR0,0);
- &RIP5($D,$E,$A,$B,$C,$wr[ 2],$sr[ 2],$KR0,0);
- &RIP5($C,$D,$E,$A,$B,$wr[ 3],$sr[ 3],$KR0,0);
- &RIP5($B,$C,$D,$E,$A,$wr[ 4],$sr[ 4],$KR0,0);
- &RIP5($A,$B,$C,$D,$E,$wr[ 5],$sr[ 5],$KR0,0);
- &RIP5($E,$A,$B,$C,$D,$wr[ 6],$sr[ 6],$KR0,0);
- &RIP5($D,$E,$A,$B,$C,$wr[ 7],$sr[ 7],$KR0,0);
- &RIP5($C,$D,$E,$A,$B,$wr[ 8],$sr[ 8],$KR0,0);
- &RIP5($B,$C,$D,$E,$A,$wr[ 9],$sr[ 9],$KR0,0);
- &RIP5($A,$B,$C,$D,$E,$wr[10],$sr[10],$KR0,0);
- &RIP5($E,$A,$B,$C,$D,$wr[11],$sr[11],$KR0,0);
- &RIP5($D,$E,$A,$B,$C,$wr[12],$sr[12],$KR0,0);
- &RIP5($C,$D,$E,$A,$B,$wr[13],$sr[13],$KR0,0);
- &RIP5($B,$C,$D,$E,$A,$wr[14],$sr[14],$KR0,0);
- &RIP5($A,$B,$C,$D,$E,$wr[15],$sr[15],$KR0,2);
-
- &RIP4($E,$A,$B,$C,$D,$wr[16],$sr[16],$KR1,-2);
- &RIP4($D,$E,$A,$B,$C,$wr[17],$sr[17],$KR1,0);
- &RIP4($C,$D,$E,$A,$B,$wr[18],$sr[18],$KR1,0);
- &RIP4($B,$C,$D,$E,$A,$wr[19],$sr[19],$KR1,0);
- &RIP4($A,$B,$C,$D,$E,$wr[20],$sr[20],$KR1,0);
- &RIP4($E,$A,$B,$C,$D,$wr[21],$sr[21],$KR1,0);
- &RIP4($D,$E,$A,$B,$C,$wr[22],$sr[22],$KR1,0);
- &RIP4($C,$D,$E,$A,$B,$wr[23],$sr[23],$KR1,0);
- &RIP4($B,$C,$D,$E,$A,$wr[24],$sr[24],$KR1,0);
- &RIP4($A,$B,$C,$D,$E,$wr[25],$sr[25],$KR1,0);
- &RIP4($E,$A,$B,$C,$D,$wr[26],$sr[26],$KR1,0);
- &RIP4($D,$E,$A,$B,$C,$wr[27],$sr[27],$KR1,0);
- &RIP4($C,$D,$E,$A,$B,$wr[28],$sr[28],$KR1,0);
- &RIP4($B,$C,$D,$E,$A,$wr[29],$sr[29],$KR1,0);
- &RIP4($A,$B,$C,$D,$E,$wr[30],$sr[30],$KR1,0);
- &RIP4($E,$A,$B,$C,$D,$wr[31],$sr[31],$KR1,2);
-
- &RIP3($D,$E,$A,$B,$C,$wr[32],$sr[32],$KR2,-2);
- &RIP3($C,$D,$E,$A,$B,$wr[33],$sr[33],$KR2,0);
- &RIP3($B,$C,$D,$E,$A,$wr[34],$sr[34],$KR2,0);
- &RIP3($A,$B,$C,$D,$E,$wr[35],$sr[35],$KR2,0);
- &RIP3($E,$A,$B,$C,$D,$wr[36],$sr[36],$KR2,0);
- &RIP3($D,$E,$A,$B,$C,$wr[37],$sr[37],$KR2,0);
- &RIP3($C,$D,$E,$A,$B,$wr[38],$sr[38],$KR2,0);
- &RIP3($B,$C,$D,$E,$A,$wr[39],$sr[39],$KR2,0);
- &RIP3($A,$B,$C,$D,$E,$wr[40],$sr[40],$KR2,0);
- &RIP3($E,$A,$B,$C,$D,$wr[41],$sr[41],$KR2,0);
- &RIP3($D,$E,$A,$B,$C,$wr[42],$sr[42],$KR2,0);
- &RIP3($C,$D,$E,$A,$B,$wr[43],$sr[43],$KR2,0);
- &RIP3($B,$C,$D,$E,$A,$wr[44],$sr[44],$KR2,0);
- &RIP3($A,$B,$C,$D,$E,$wr[45],$sr[45],$KR2,0);
- &RIP3($E,$A,$B,$C,$D,$wr[46],$sr[46],$KR2,0);
- &RIP3($D,$E,$A,$B,$C,$wr[47],$sr[47],$KR2,2,$wr[48]);
-
- &RIP2($C,$D,$E,$A,$B,$wr[48],$wr[49],$sr[48],$KR3,-2);
- &RIP2($B,$C,$D,$E,$A,$wr[49],$wr[50],$sr[49],$KR3,0);
- &RIP2($A,$B,$C,$D,$E,$wr[50],$wr[51],$sr[50],$KR3,0);
- &RIP2($E,$A,$B,$C,$D,$wr[51],$wr[52],$sr[51],$KR3,0);
- &RIP2($D,$E,$A,$B,$C,$wr[52],$wr[53],$sr[52],$KR3,0);
- &RIP2($C,$D,$E,$A,$B,$wr[53],$wr[54],$sr[53],$KR3,0);
- &RIP2($B,$C,$D,$E,$A,$wr[54],$wr[55],$sr[54],$KR3,0);
- &RIP2($A,$B,$C,$D,$E,$wr[55],$wr[56],$sr[55],$KR3,0);
- &RIP2($E,$A,$B,$C,$D,$wr[56],$wr[57],$sr[56],$KR3,0);
- &RIP2($D,$E,$A,$B,$C,$wr[57],$wr[58],$sr[57],$KR3,0);
- &RIP2($C,$D,$E,$A,$B,$wr[58],$wr[59],$sr[58],$KR3,0);
- &RIP2($B,$C,$D,$E,$A,$wr[59],$wr[60],$sr[59],$KR3,0);
- &RIP2($A,$B,$C,$D,$E,$wr[60],$wr[61],$sr[60],$KR3,0);
- &RIP2($E,$A,$B,$C,$D,$wr[61],$wr[62],$sr[61],$KR3,0);
- &RIP2($D,$E,$A,$B,$C,$wr[62],$wr[63],$sr[62],$KR3,0);
- &RIP2($C,$D,$E,$A,$B,$wr[63],$wr[64],$sr[63],$KR3,2);
-
- &RIP1($B,$C,$D,$E,$A,$wr[64],$sr[64],-2);
- &RIP1($A,$B,$C,$D,$E,$wr[65],$sr[65],0);
- &RIP1($E,$A,$B,$C,$D,$wr[66],$sr[66],0);
- &RIP1($D,$E,$A,$B,$C,$wr[67],$sr[67],0);
- &RIP1($C,$D,$E,$A,$B,$wr[68],$sr[68],0);
- &RIP1($B,$C,$D,$E,$A,$wr[69],$sr[69],0);
- &RIP1($A,$B,$C,$D,$E,$wr[70],$sr[70],0);
- &RIP1($E,$A,$B,$C,$D,$wr[71],$sr[71],0);
- &RIP1($D,$E,$A,$B,$C,$wr[72],$sr[72],0);
- &RIP1($C,$D,$E,$A,$B,$wr[73],$sr[73],0);
- &RIP1($B,$C,$D,$E,$A,$wr[74],$sr[74],0);
- &RIP1($A,$B,$C,$D,$E,$wr[75],$sr[75],0);
- &RIP1($E,$A,$B,$C,$D,$wr[76],$sr[76],0);
- &RIP1($D,$E,$A,$B,$C,$wr[77],$sr[77],0);
- &RIP1($C,$D,$E,$A,$B,$wr[78],$sr[78],0);
- &RIP1($B,$C,$D,$E,$A,$wr[79],$sr[79],2);
-
- # &mov($tmp2, &wparam(0)); # Moved into last round
-
- &mov($tmp1, &DWP( 4,$tmp2,"",0)); # ctx->B
- &add($D, $tmp1);
- &mov($tmp1, &swtmp(16+2)); # $c
- &add($D, $tmp1);
-
- &mov($tmp1, &DWP( 8,$tmp2,"",0)); # ctx->C
- &add($E, $tmp1);
- &mov($tmp1, &swtmp(16+3)); # $d
- &add($E, $tmp1);
-
- &mov($tmp1, &DWP(12,$tmp2,"",0)); # ctx->D
- &add($A, $tmp1);
- &mov($tmp1, &swtmp(16+4)); # $e
- &add($A, $tmp1);
-
-
- &mov($tmp1, &DWP(16,$tmp2,"",0)); # ctx->E
- &add($B, $tmp1);
- &mov($tmp1, &swtmp(16+0)); # $a
- &add($B, $tmp1);
-
- &mov($tmp1, &DWP( 0,$tmp2,"",0)); # ctx->A
- &add($C, $tmp1);
- &mov($tmp1, &swtmp(16+1)); # $b
- &add($C, $tmp1);
-
- &mov($tmp1, &wparam(2));
-
- &mov(&DWP( 0,$tmp2,"",0), $D);
- &mov(&DWP( 4,$tmp2,"",0), $E);
- &mov(&DWP( 8,$tmp2,"",0), $A);
- &sub($tmp1,1);
- &mov(&DWP(12,$tmp2,"",0), $B);
- &mov(&DWP(16,$tmp2,"",0), $C);
-
- &jle(&label("get_out"));
-
- &mov(&wparam(2),$tmp1);
- &mov($C, $A);
- &mov($tmp1, &wparam(1));
- &mov($A, $D);
- &add($tmp1, 64);
- &mov($B, $E);
- &mov(&wparam(1),$tmp1);
-
- &jmp(&label("start"));
-
- &set_label("get_out");
-
- &stack_pop(16+5+6);
-
- &pop("ebx");
- &pop("ebp");
- &pop("edi");
- &pop("esi");
- &ret();
- &function_end_B($name);
- }
-
diff --git a/openssl/crypto/ripemd/ripemd.h b/openssl/crypto/ripemd/ripemd.h
deleted file mode 100644
index 5942eb61..00000000
--- a/openssl/crypto/ripemd/ripemd.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* crypto/ripemd/ripemd.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to. The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code. The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * "This product includes cryptographic software written by
- * Eric Young (eay@cryptsoft.com)"
- * The word 'cryptographic' can be left out if the rouines from the library
- * being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- * the apps directory (application code) you must include an acknowledgement:
- * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed. i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_RIPEMD_H
-#define HEADER_RIPEMD_H
-
-#include <openssl/e_os2.h>
-#include <stddef.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifdef OPENSSL_NO_RIPEMD
-#error RIPEMD is disabled.
-#endif
-
-#if defined(__LP32__)
-#define RIPEMD160_LONG unsigned long
-#elif defined(OPENSSL_SYS_CRAY) || defined(__ILP64__)
-#define RIPEMD160_LONG unsigned long
-#define RIPEMD160_LONG_LOG2 3
-#else
-#define RIPEMD160_LONG unsigned int
-#endif
-
-#define RIPEMD160_CBLOCK 64
-#define RIPEMD160_LBLOCK (RIPEMD160_CBLOCK/4)
-#define RIPEMD160_DIGEST_LENGTH 20
-
-typedef struct RIPEMD160state_st
- {
- RIPEMD160_LONG A,B,C,D,E;
- RIPEMD160_LONG Nl,Nh;
- RIPEMD160_LONG data[RIPEMD160_LBLOCK];
- unsigned int num;
- } RIPEMD160_CTX;
-
-int RIPEMD160_Init(RIPEMD160_CTX *c);
-int RIPEMD160_Update(RIPEMD160_CTX *c, const void *data, size_t len);
-int RIPEMD160_Final(unsigned char *md, RIPEMD160_CTX *c);
-unsigned char *RIPEMD160(const unsigned char *d, size_t n,
- unsigned char *md);
-void RIPEMD160_Transform(RIPEMD160_CTX *c, const unsigned char *b);
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/openssl/crypto/ripemd/rmd160.c b/openssl/crypto/ripemd/rmd160.c
deleted file mode 100644
index b0ec5744..00000000
--- a/openssl/crypto/ripemd/rmd160.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* crypto/ripemd/rmd160.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to. The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code. The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * "This product includes cryptographic software written by
- * Eric Young (eay@cryptsoft.com)"
- * The word 'cryptographic' can be left out if the rouines from the library
- * being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- * the apps directory (application code) you must include an acknowledgement:
- * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed. i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/ripemd.h>
-
-#define BUFSIZE 1024*16
-
-void do_fp(FILE *f);
-void pt(unsigned char *md);
-#if !defined(_OSD_POSIX) && !defined(__DJGPP__)
-int read(int, void *, unsigned int);
-#endif
-
-int main(int argc, char **argv)
- {
- int i,err=0;
- FILE *IN;
-
- if (argc == 1)
- {
- do_fp(stdin);
- }
- else
- {
- for (i=1; i<argc; i++)
- {
- IN=fopen(argv[i],"r");
- if (IN == NULL)
- {
- perror(argv[i]);
- err++;
- continue;
- }
- printf("RIPEMD160(%s)= ",argv[i]);
- do_fp(IN);
- fclose(IN);
- }
- }
- exit(err);
- }
-
-void do_fp(FILE *f)
- {
- RIPEMD160_CTX c;
- unsigned char md[RIPEMD160_DIGEST_LENGTH];
- int fd;
- int i;
- static unsigned char buf[BUFSIZE];
-
- fd=fileno(f);
- RIPEMD160_Init(&c);
- for (;;)
- {
- i=read(fd,buf,BUFSIZE);
- if (i <= 0) break;
- RIPEMD160_Update(&c,buf,(unsigned long)i);
- }
- RIPEMD160_Final(&(md[0]),&c);
- pt(md);
- }
-
-void pt(unsigned char *md)
- {
- int i;
-
- for (i=0; i<RIPEMD160_DIGEST_LENGTH; i++)
- printf("%02x",md[i]);
- printf("\n");
- }
-
diff --git a/openssl/crypto/ripemd/rmd_dgst.c b/openssl/crypto/ripemd/rmd_dgst.c
deleted file mode 100644
index 59b017f8..00000000
--- a/openssl/crypto/ripemd/rmd_dgst.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/* crypto/ripemd/rmd_dgst.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to. The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code. The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * "This product includes cryptographic software written by
- * Eric Young (eay@cryptsoft.com)"
- * The word 'cryptographic' can be left out if the rouines from the library
- * being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- * the apps directory (application code) you must include an acknowledgement:
- * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed. i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "rmd_locl.h"
-#include <openssl/opensslv.h>
-
-const char RMD160_version[]="RIPE-MD160" OPENSSL_VERSION_PTEXT;
-
-# ifdef RMD160_ASM
- void ripemd160_block_x86(RIPEMD160_CTX *c, unsigned long *p,size_t num);
-# define ripemd160_block ripemd160_block_x86
-# else
- void ripemd160_block(RIPEMD160_CTX *c, unsigned long *p,size_t num);
-# endif
-
-int RIPEMD160_Init(RIPEMD160_CTX *c)
- {
- memset (c,0,sizeof(*c));
- c->A=RIPEMD160_A;
- c->B=RIPEMD160_B;
- c->C=RIPEMD160_C;
- c->D=RIPEMD160_D;
- c->E=RIPEMD160_E;
- return 1;
- }
-
-#ifndef ripemd160_block_data_order
-#ifdef X
-#undef X
-#endif
-void ripemd160_block_data_order (RIPEMD160_CTX *ctx, const void *p, size_t num)
- {
- const unsigned char *data=p;
- register unsigned MD32_REG_T A,B,C,D,E;
- unsigned MD32_REG_T a,b,c,d,e,l;
-#ifndef MD32_XARRAY
- /* See comment in crypto/sha/sha_locl.h for details. */
- unsigned MD32_REG_T XX0, XX1, XX2, XX3, XX4, XX5, XX6, XX7,
- XX8, XX9,XX10,XX11,XX12,XX13,XX14,XX15;
-# define X(i) XX##i
-#else
- RIPEMD160_LONG XX[16];
-# define X(i) XX[i]
-#endif
-
- for (;num--;)
- {
-
- A=ctx->A; B=ctx->B; C=ctx->C; D=ctx->D; E=ctx->E;
-
- HOST_c2l(data,l); X( 0)=l; HOST_c2l(data,l); X( 1)=l;
- RIP1(A,B,C,D,E,WL00,SL00); HOST_c2l(data,l); X( 2)=l;
- RIP1(E,A,B,C,D,WL01,SL01); HOST_c2l(data,l); X( 3)=l;
- RIP1(D,E,A,B,C,WL02,SL02); HOST_c2l(data,l); X( 4)=l;
- RIP1(C,D,E,A,B,WL03,SL03); HOST_c2l(data,l); X( 5)=l;
- RIP1(B,C,D,E,A,WL04,SL04); HOST_c2l(data,l); X( 6)=l;
- RIP1(A,B,C,D,E,WL05,SL05); HOST_c2l(data,l); X( 7)=l;
- RIP1(E,A,B,C,D,WL06,SL06); HOST_c2l(data,l); X( 8)=l;
- RIP1(D,E,A,B,C,WL07,SL07); HOST_c2l(data,l); X( 9)=l;
- RIP1(C,D,E,A,B,WL08,SL08); HOST_c2l(data,l); X(10)=l;
- RIP1(B,C,D,E,A,WL09,SL09); HOST_c2l(data,l); X(11)=l;
- RIP1(A,B,C,D,E,WL10,SL10); HOST_c2l(data,l); X(12)=l;
- RIP1(E,A,B,C,D,WL11,SL11); HOST_c2l(data,l); X(13)=l;
- RIP1(D,E,A,B,C,WL12,SL12); HOST_c2l(data,l); X(14)=l;
- RIP1(C,D,E,A,B,WL13,SL13); HOST_c2l(data,l); X(15)=l;
- RIP1(B,C,D,E,A,WL14,SL14);
- RIP1(A,B,C,D,E,WL15,SL15);
-
- RIP2(E,A,B,C,D,WL16,SL16,KL1);
- RIP2(D,E,A,B,C,WL17,SL17,KL1);
- RIP2(C,D,E,A,B,WL18,SL18,KL1);
- RIP2(B,C,D,E,A,WL19,SL19,KL1);
- RIP2(A,B,C,D,E,WL20,SL20,KL1);
- RIP2(E,A,B,C,D,WL21,SL21,KL1);
- RIP2(D,E,A,B,C,WL22,SL22,KL1);
- RIP2(C,D,E,A,B,WL23,SL23,KL1);
- RIP2(B,C,D,E,A,WL24,SL24,KL1);
- RIP2(A,B,C,D,E,WL25,SL25,KL1);
- RIP2(E,A,B,C,D,WL26,SL26,KL1);
- RIP2(D,E,A,B,C,WL27,SL27,KL1);
- RIP2(C,D,E,A,B,WL28,SL28,KL1);
- RIP2(B,C,D,E,A,WL29,SL29,KL1);
- RIP2(A,B,C,D,E,WL30,SL30,KL1);
- RIP2(E,A,B,C,D,WL31,SL31,KL1);
-
- RIP3(D,E,A,B,C,WL32,SL32,KL2);
- RIP3(C,D,E,A,B,WL33,SL33,KL2);
- RIP3(B,C,D,E,A,WL34,SL34,KL2);
- RIP3(A,B,C,D,E,WL35,SL35,KL2);
- RIP3(E,A,B,C,D,WL36,SL36,KL2);
- RIP3(D,E,A,B,C,WL37,SL37,KL2);
- RIP3(C,D,E,A,B,WL38,SL38,KL2);
- RIP3(B,C,D,E,A,WL39,SL39,KL2);
- RIP3(A,B,C,D,E,WL40,SL40,KL2);
- RIP3(E,A,B,C,D,WL41,SL41,KL2);
- RIP3(D,E,A,B,C,WL42,SL42,KL2);
- RIP3(C,D,E,A,B,WL43,SL43,KL2);
- RIP3(B,C,D,E,A,WL44,SL44,KL2);
- RIP3(A,B,C,D,E,WL45,SL45,KL2);
- RIP3(E,A,B,C,D,WL46,SL46,KL2);
- RIP3(D,E,A,B,C,WL47,SL47,KL2);
-
- RIP4(C,D,E,A,B,WL48,SL48,KL3);
- RIP4(B,C,D,E,A,WL49,SL49,KL3);
- RIP4(A,B,C,D,E,WL50,SL50,KL3);
- RIP4(E,A,B,C,D,WL51,SL51,KL3);
- RIP4(D,E,A,B,C,WL52,SL52,KL3);
- RIP4(C,D,E,A,B,WL53,SL53,KL3);
- RIP4(B,C,D,E,A,WL54,SL54,KL3);
- RIP4(A,B,C,D,E,WL55,SL55,KL3);
- RIP4(E,A,B,C,D,WL56,SL56,KL3);
- RIP4(D,E,A,B,C,WL57,SL57,KL3);
- RIP4(C,D,E,A,B,WL58,SL58,KL3);
- RIP4(B,C,D,E,A,WL59,SL59,KL3);
- RIP4(A,B,C,D,E,WL60,SL60,KL3);
- RIP4(E,A,B,C,D,WL61,SL61,KL3);
- RIP4(D,E,A,B,C,WL62,SL62,KL3);
- RIP4(C,D,E,A,B,WL63,SL63,KL3);
-
- RIP5(B,C,D,E,A,WL64,SL64,KL4);
- RIP5(A,B,C,D,E,WL65,SL65,KL4);
- RIP5(E,A,B,C,D,WL66,SL66,KL4);
- RIP5(D,E,A,B,C,WL67,SL67,KL4);
- RIP5(C,D,E,A,B,WL68,SL68,KL4);
- RIP5(B,C,D,E,A,WL69,SL69,KL4);
- RIP5(A,B,C,D,E,WL70,SL70,KL4);
- RIP5(E,A,B,C,D,WL71,SL71,KL4);
- RIP5(D,E,A,B,C,WL72,SL72,KL4);
- RIP5(C,D,E,A,B,WL73,SL73,KL4);
- RIP5(B,C,D,E,A,WL74,SL74,KL4);
- RIP5(A,B,C,D,E,WL75,SL75,KL4);
- RIP5(E,A,B,C,D,WL76,SL76,KL4);
- RIP5(D,E,A,B,C,WL77,SL77,KL4);
- RIP5(C,D,E,A,B,WL78,SL78,KL4);
- RIP5(B,C,D,E,A,WL79,SL79,KL4);
-
- a=A; b=B; c=C; d=D; e=E;
- /* Do other half */
- A=ctx->A; B=ctx->B; C=ctx->C; D=ctx->D; E=ctx->E;
-
- RIP5(A,B,C,D,E,WR00,SR00,KR0);
- RIP5(E,A,B,C,D,WR01,SR01,KR0);
- RIP5(D,E,A,B,C,WR02,SR02,KR0);
- RIP5(C,D,E,A,B,WR03,SR03,KR0);
- RIP5(B,C,D,E,A,WR04,SR04,KR0);
- RIP5(A,B,C,D,E,WR05,SR05,KR0);
- RIP5(E,A,B,C,D,WR06,SR06,KR0);
- RIP5(D,E,A,B,C,WR07,SR07,KR0);
- RIP5(C,D,E,A,B,WR08,SR08,KR0);
- RIP5(B,C,D,E,A,WR09,SR09,KR0);
- RIP5(A,B,C,D,E,WR10,SR10,KR0);
- RIP5(E,A,B,C,D,WR11,SR11,KR0);
- RIP5(D,E,A,B,C,WR12,SR12,KR0);
- RIP5(C,D,E,A,B,WR13,SR13,KR0);
- RIP5(B,C,D,E,A,WR14,SR14,KR0);
- RIP5(A,B,C,D,E,WR15,SR15,KR0);
-
- RIP4(E,A,B,C,D,WR16,SR16,KR1);
- RIP4(D,E,A,B,C,WR17,SR17,KR1);
- RIP4(C,D,E,A,B,WR18,SR18,KR1);
- RIP4(B,C,D,E,A,WR19,SR19,KR1);
- RIP4(A,B,C,D,E,WR20,SR20,KR1);
- RIP4(E,A,B,C,D,WR21,SR21,KR1);
- RIP4(D,E,A,B,C,WR22,SR22,KR1);
- RIP4(C,D,E,A,B,WR23,SR23,KR1);
- RIP4(B,C,D,E,A,WR24,SR24,KR1);
- RIP4(A,B,C,D,E,WR25,SR25,KR1);
- RIP4(E,A,B,C,D,WR26,SR26,KR1);
- RIP4(D,E,A,B,C,WR27,SR27,KR1);
- RIP4(C,D,E,A,B,WR28,SR28,KR1);
- RIP4(B,C,D,E,A,WR29,SR29,KR1);
- RIP4(A,B,C,D,E,WR30,SR30,KR1);
- RIP4(E,A,B,C,D,WR31,SR31,KR1);
-
- RIP3(D,E,A,B,C,WR32,SR32,KR2);
- RIP3(C,D,E,A,B,WR33,SR33,KR2);
- RIP3(B,C,D,E,A,WR34,SR34,KR2);
- RIP3(A,B,C,D,E,WR35,SR35,KR2);
- RIP3(E,A,B,C,D,WR36,SR36,KR2);
- RIP3(D,E,A,B,C,WR37,SR37,KR2);
- RIP3(C,D,E,A,B,WR38,SR38,KR2);
- RIP3(B,C,D,E,A,WR39,SR39,KR2);
- RIP3(A,B,C,D,E,WR40,SR40,KR2);
- RIP3(E,A,B,C,D,WR41,SR41,KR2);
- RIP3(D,E,A,B,C,WR42,SR42,KR2);
- RIP3(C,D,E,A,B,WR43,SR43,KR2);
- RIP3(B,C,D,E,A,WR44,SR44,KR2);
- RIP3(A,B,C,D,E,WR45,SR45,KR2);
- RIP3(E,A,B,C,D,WR46,SR46,KR2);
- RIP3(D,E,A,B,C,WR47,SR47,KR2);
-
- RIP2(C,D,E,A,B,WR48,SR48,KR3);
- RIP2(B,C,D,E,A,WR49,SR49,KR3);
- RIP2(A,B,C,D,E,WR50,SR50,KR3);
- RIP2(E,A,B,C,D,WR51,SR51,KR3);
- RIP2(D,E,A,B,C,WR52,SR52,KR3);
- RIP2(C,D,E,A,B,WR53,SR53,KR3);
- RIP2(B,C,D,E,A,WR54,SR54,KR3);
- RIP2(A,B,C,D,E,WR55,SR55,KR3);
- RIP2(E,A,B,C,D,WR56,SR56,KR3);
- RIP2(D,E,A,B,C,WR57,SR57,KR3);
- RIP2(C,D,E,A,B,WR58,SR58,KR3);
- RIP2(B,C,D,E,A,WR59,SR59,KR3);
- RIP2(A,B,C,D,E,WR60,SR60,KR3);
- RIP2(E,A,B,C,D,WR61,SR61,KR3);
- RIP2(D,E,A,B,C,WR62,SR62,KR3);
- RIP2(C,D,E,A,B,WR63,SR63,KR3);
-
- RIP1(B,C,D,E,A,WR64,SR64);
- RIP1(A,B,C,D,E,WR65,SR65);
- RIP1(E,A,B,C,D,WR66,SR66);
- RIP1(D,E,A,B,C,WR67,SR67);
- RIP1(C,D,E,A,B,WR68,SR68);
- RIP1(B,C,D,E,A,WR69,SR69);
- RIP1(A,B,C,D,E,WR70,SR70);
- RIP1(E,A,B,C,D,WR71,SR71);
- RIP1(D,E,A,B,C,WR72,SR72);
- RIP1(C,D,E,A,B,WR73,SR73);
- RIP1(B,C,D,E,A,WR74,SR74);
- RIP1(A,B,C,D,E,WR75,SR75);
- RIP1(E,A,B,C,D,WR76,SR76);
- RIP1(D,E,A,B,C,WR77,SR77);
- RIP1(C,D,E,A,B,WR78,SR78);
- RIP1(B,C,D,E,A,WR79,SR79);
-
- D =ctx->B+c+D;
- ctx->B=ctx->C+d+E;
- ctx->C=ctx->D+e+A;
- ctx->D=ctx->E+a+B;
- ctx->E=ctx->A+b+C;
- ctx->A=D;
-
- }
- }
-#endif
diff --git a/openssl/crypto/ripemd/rmd_locl.h b/openssl/crypto/ripemd/rmd_locl.h
deleted file mode 100644
index f14b346e..00000000
--- a/openssl/crypto/ripemd/rmd_locl.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* crypto/ripemd/rmd_locl.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to. The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code. The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * "This product includes cryptographic software written by
- * Eric Young (eay@cryptsoft.com)"
- * The word 'cryptographic' can be left out if the rouines from the library
- * being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- * the apps directory (application code) you must include an acknowledgement:
- * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed. i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/opensslconf.h>
-#include <openssl/ripemd.h>
-
-#ifndef RIPEMD160_LONG_LOG2
-#define RIPEMD160_LONG_LOG2 2 /* default to 32 bits */
-#endif
-
-/*
- * DO EXAMINE COMMENTS IN crypto/md5/md5_locl.h & crypto/md5/md5_dgst.c
- * FOR EXPLANATIONS ON FOLLOWING "CODE."
- * <appro@fy.chalmers.se>
- */
-#ifdef RMD160_ASM
-# if defined(__i386) || defined(__i386__) || defined(_M_IX86) || defined(__INTEL__)
-# define ripemd160_block_data_order ripemd160_block_asm_data_order
-# endif
-#endif
-
-void ripemd160_block_data_order (RIPEMD160_CTX *c, const void *p,size_t num);
-
-#define DATA_ORDER_IS_LITTLE_ENDIAN
-
-#define HASH_LONG RIPEMD160_LONG
-#define HASH_CTX RIPEMD160_CTX
-#define HASH_CBLOCK RIPEMD160_CBLOCK
-#define HASH_UPDATE RIPEMD160_Update
-#define HASH_TRANSFORM RIPEMD160_Transform
-#define HASH_FINAL RIPEMD160_Final
-#define HASH_MAKE_STRING(c,s) do { \
- unsigned long ll; \
- ll=(c)->A; HOST_l2c(ll,(s)); \
- ll=(c)->B; HOST_l2c(ll,(s)); \
- ll=(c)->C; HOST_l2c(ll,(s)); \
- ll=(c)->D; HOST_l2c(ll,(s)); \
- ll=(c)->E; HOST_l2c(ll,(s)); \
- } while (0)
-#define HASH_BLOCK_DATA_ORDER ripemd160_block_data_order
-
-#include "md32_common.h"
-
-#if 0
-#define F1(x,y,z) ((x)^(y)^(z))
-#define F2(x,y,z) (((x)&(y))|((~x)&z))
-#define F3(x,y,z) (((x)|(~y))^(z))
-#define F4(x,y,z) (((x)&(z))|((y)&(~(z))))
-#define F5(x,y,z) ((x)^((y)|(~(z))))
-#else
-/*
- * Transformed F2 and F4 are courtesy of Wei Dai <weidai@eskimo.com>
- */
-#define F1(x,y,z) ((x) ^ (y) ^ (z))
-#define F2(x,y,z) ((((y) ^ (z)) & (x)) ^ (z))
-#define F3(x,y,z) (((~(y)) | (x)) ^ (z))
-#define F4(x,y,z) ((((x) ^ (y)) & (z)) ^ (y))
-#define F5(x,y,z) (((~(z)) | (y)) ^ (x))
-#endif
-
-#define RIPEMD160_A 0x67452301L
-#define RIPEMD160_B 0xEFCDAB89L
-#define RIPEMD160_C 0x98BADCFEL
-#define RIPEMD160_D 0x10325476L
-#define RIPEMD160_E 0xC3D2E1F0L
-
-#include "rmdconst.h"
-
-#define RIP1(a,b,c,d,e,w,s) { \
- a+=F1(b,c,d)+X(w); \
- a=ROTATE(a,s)+e; \
- c=ROTATE(c,10); }
-
-#define RIP2(a,b,c,d,e,w,s,K) { \
- a+=F2(b,c,d)+X(w)+K; \
- a=ROTATE(a,s)+e; \
- c=ROTATE(c,10); }
-
-#define RIP3(a,b,c,d,e,w,s,K) { \
- a+=F3(b,c,d)+X(w)+K; \
- a=ROTATE(a,s)+e; \
- c=ROTATE(c,10); }
-
-#define RIP4(a,b,c,d,e,w,s,K) { \
- a+=F4(b,c,d)+X(w)+K; \
- a=ROTATE(a,s)+e; \
- c=ROTATE(c,10); }
-
-#define RIP5(a,b,c,d,e,w,s,K) { \
- a+=F5(b,c,d)+X(w)+K; \
- a=ROTATE(a,s)+e; \
- c=ROTATE(c,10); }
-
diff --git a/openssl/crypto/ripemd/rmd_one.c b/openssl/crypto/ripemd/rmd_one.c
deleted file mode 100644
index 3efb1375..00000000
--- a/openssl/crypto/ripemd/rmd_one.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* crypto/ripemd/rmd_one.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to. The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code. The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * "This product includes cryptographic software written by
- * Eric Young (eay@cryptsoft.com)"
- * The word 'cryptographic' can be left out if the rouines from the library
- * being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- * the apps directory (application code) you must include an acknowledgement:
- * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed. i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <openssl/ripemd.h>
-#include <openssl/crypto.h>
-
-unsigned char *RIPEMD160(const unsigned char *d, size_t n,
- unsigned char *md)
- {
- RIPEMD160_CTX c;
- static unsigned char m[RIPEMD160_DIGEST_LENGTH];
-
- if (md == NULL) md=m;
- if (!RIPEMD160_Init(&c))
- return NULL;
- RIPEMD160_Update(&c,d,n);
- RIPEMD160_Final(md,&c);
- OPENSSL_cleanse(&c,sizeof(c)); /* security consideration */
- return(md);
- }
-
diff --git a/openssl/crypto/ripemd/rmdconst.h b/openssl/crypto/ripemd/rmdconst.h
deleted file mode 100644
index 59c48dea..00000000
--- a/openssl/crypto/ripemd/rmdconst.h
+++ /dev/null
@@ -1,399 +0,0 @@
-/* crypto/ripemd/rmdconst.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to. The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code. The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * "This product includes cryptographic software written by
- * Eric Young (eay@cryptsoft.com)"
- * The word 'cryptographic' can be left out if the rouines from the library
- * being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- * the apps directory (application code) you must include an acknowledgement:
- * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed. i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-#define KL0 0x00000000L
-#define KL1 0x5A827999L
-#define KL2 0x6ED9EBA1L
-#define KL3 0x8F1BBCDCL
-#define KL4 0xA953FD4EL
-
-#define KR0 0x50A28BE6L
-#define KR1 0x5C4DD124L
-#define KR2 0x6D703EF3L
-#define KR3 0x7A6D76E9L
-#define KR4 0x00000000L
-
-#define WL00 0
-#define SL00 11
-#define WL01 1
-#define SL01 14
-#define WL02 2
-#define SL02 15
-#define WL03 3
-#define SL03 12
-#define WL04 4
-#define SL04 5
-#define WL05 5
-#define SL05 8
-#define WL06 6
-#define SL06 7
-#define WL07 7
-#define SL07 9
-#define WL08 8
-#define SL08 11
-#define WL09 9
-#define SL09 13
-#define WL10 10
-#define SL10 14
-#define WL11 11
-#define SL11 15
-#define WL12 12
-#define SL12 6
-#define WL13 13
-#define SL13 7
-#define WL14 14
-#define SL14 9
-#define WL15 15
-#define SL15 8
-
-#define WL16 7
-#define SL16 7
-#define WL17 4
-#define SL17 6
-#define WL18 13
-#define SL18 8
-#define WL19 1
-#define SL19 13
-#define WL20 10
-#define SL20 11
-#define WL21 6
-#define SL21 9
-#define WL22 15
-#define SL22 7
-#define WL23 3
-#define SL23 15
-#define WL24 12
-#define SL24 7
-#define WL25 0
-#define SL25 12
-#define WL26 9
-#define SL26 15
-#define WL27 5
-#define SL27 9
-#define WL28 2
-#define SL28 11
-#define WL29 14
-#define SL29 7
-#define WL30 11
-#define SL30 13
-#define WL31 8
-#define SL31 12
-
-#define WL32 3
-#define SL32 11
-#define WL33 10
-#define SL33 13
-#define WL34 14
-#define SL34 6
-#define WL35 4
-#define SL35 7
-#define WL36 9
-#define SL36 14
-#define WL37 15
-#define SL37 9
-#define WL38 8
-#define SL38 13
-#define WL39 1
-#define SL39 15
-#define WL40 2
-#define SL40 14
-#define WL41 7
-#define SL41 8
-#define WL42 0
-#define SL42 13
-#define WL43 6
-#define SL43 6
-#define WL44 13
-#define SL44 5
-#define WL45 11
-#define SL45 12
-#define WL46 5
-#define SL46 7
-#define WL47 12
-#define SL47 5
-
-#define WL48 1
-#define SL48 11
-#define WL49 9
-#define SL49 12
-#define WL50 11
-#define SL50 14
-#define WL51 10
-#define SL51 15
-#define WL52 0
-#define SL52 14
-#define WL53 8
-#define SL53 15
-#define WL54 12
-#define SL54 9
-#define WL55 4
-#define SL55 8
-#define WL56 13
-#define SL56 9
-#define WL57 3
-#define SL57 14
-#define WL58 7
-#define SL58 5
-#define WL59 15
-#define SL59 6
-#define WL60 14
-#define SL60 8
-#define WL61 5
-#define SL61 6
-#define WL62 6
-#define SL62 5
-#define WL63 2
-#define SL63 12
-
-#define WL64 4
-#define SL64 9
-#define WL65 0
-#define SL65 15
-#define WL66 5
-#define SL66 5
-#define WL67 9
-#define SL67 11
-#define WL68 7
-#define SL68 6
-#define WL69 12
-#define SL69 8
-#define WL70 2
-#define SL70 13
-#define WL71 10
-#define SL71 12
-#define WL72 14
-#define SL72 5
-#define WL73 1
-#define SL73 12
-#define WL74 3
-#define SL74 13
-#define WL75 8
-#define SL75 14
-#define WL76 11
-#define SL76 11
-#define WL77 6
-#define SL77 8
-#define WL78 15
-#define SL78 5
-#define WL79 13
-#define SL79 6
-
-#define WR00 5
-#define SR00 8
-#define WR01 14
-#define SR01 9
-#define WR02 7
-#define SR02 9
-#define WR03 0
-#define SR03 11
-#define WR04 9
-#define SR04 13
-#define WR05 2
-#define SR05 15
-#define WR06 11
-#define SR06 15
-#define WR07 4
-#define SR07 5
-#define WR08 13
-#define SR08 7
-#define WR09 6
-#define SR09 7
-#define WR10 15
-#define SR10 8
-#define WR11 8
-#define SR11 11
-#define WR12 1
-#define SR12 14
-#define WR13 10
-#define SR13 14
-#define WR14 3
-#define SR14 12
-#define WR15 12
-#define SR15 6
-
-#define WR16 6
-#define SR16 9
-#define WR17 11
-#define SR17 13
-#define WR18 3
-#define SR18 15
-#define WR19 7
-#define SR19 7
-#define WR20 0
-#define SR20 12
-#define WR21 13
-#define SR21 8
-#define WR22 5
-#define SR22 9
-#define WR23 10
-#define SR23 11
-#define WR24 14
-#define SR24 7
-#define WR25 15
-#define SR25 7
-#define WR26 8
-#define SR26 12
-#define WR27 12
-#define SR27 7
-#define WR28 4
-#define SR28 6
-#define WR29 9
-#define SR29 15
-#define WR30 1
-#define SR30 13
-#define WR31 2
-#define SR31 11
-
-#define WR32 15
-#define SR32 9
-#define WR33 5
-#define SR33 7
-#define WR34 1
-#define SR34 15
-#define WR35 3
-#define SR35 11
-#define WR36 7
-#define SR36 8
-#define WR37 14
-#define SR37 6
-#define WR38 6
-#define SR38 6
-#define WR39 9
-#define SR39 14
-#define WR40 11
-#define SR40 12
-#define WR41 8
-#define SR41 13
-#define WR42 12
-#define SR42 5
-#define WR43 2
-#define SR43 14
-#define WR44 10
-#define SR44 13
-#define WR45 0
-#define SR45 13
-#define WR46 4
-#define SR46 7
-#define WR47 13
-#define SR47 5
-
-#define WR48 8
-#define SR48 15
-#define WR49 6
-#define SR49 5
-#define WR50 4
-#define SR50 8
-#define WR51 1
-#define SR51 11
-#define WR52 3
-#define SR52 14
-#define WR53 11
-#define SR53 14
-#define WR54 15
-#define SR54 6
-#define WR55 0
-#define SR55 14
-#define WR56 5
-#define SR56 6
-#define WR57 12
-#define SR57 9
-#define WR58 2
-#define SR58 12
-#define WR59 13
-#define SR59 9
-#define WR60 9
-#define SR60 12
-#define WR61 7
-#define SR61 5
-#define WR62 10
-#define SR62 15
-#define WR63 14
-#define SR63 8
-
-#define WR64 12
-#define SR64 8
-#define WR65 15
-#define SR65 5
-#define WR66 10
-#define SR66 12
-#define WR67 4
-#define SR67 9
-#define WR68 1
-#define SR68 12
-#define WR69 5
-#define SR69 5
-#define WR70 8
-#define SR70 14
-#define WR71 7
-#define SR71 6
-#define WR72 6
-#define SR72 8
-#define WR73 2
-#define SR73 13
-#define WR74 13
-#define SR74 6
-#define WR75 14
-#define SR75 5
-#define WR76 0
-#define SR76 15
-#define WR77 3
-#define SR77 13
-#define WR78 9
-#define SR78 11
-#define WR79 11
-#define SR79 11
-
diff --git a/openssl/crypto/ripemd/rmdtest.c b/openssl/crypto/ripemd/rmdtest.c
deleted file mode 100644
index fb34e0e8..00000000
--- a/openssl/crypto/ripemd/rmdtest.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* crypto/ripemd/rmdtest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to. The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code. The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * "This product includes cryptographic software written by
- * Eric Young (eay@cryptsoft.com)"
- * The word 'cryptographic' can be left out if the rouines from the library
- * being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- * the apps directory (application code) you must include an acknowledgement:
- * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed. i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_RIPEMD
-int main(int argc, char *argv[])
-{
- printf("No ripemd support\n");
- return(0);
-}
-#else
-#include <openssl/ripemd.h>
-#include <openssl/evp.h>
-
-#ifdef CHARSET_EBCDIC
-#include <openssl/ebcdic.h>
-#endif
-
-static char *test[]={
- "",
- "a",
- "abc",
- "message digest",
- "abcdefghijklmnopqrstuvwxyz",
- "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq",
- "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789",
- "12345678901234567890123456789012345678901234567890123456789012345678901234567890",
- NULL,
- };
-
-static char *ret[]={
- "9c1185a5c5e9fc54612808977ee8f548b2258d31",
- "0bdc9d2d256b3ee9daae347be6f4dc835a467ffe",
- "8eb208f7e05d987a9b044a8e98c6b087f15a0bfc",
- "5d0689ef49d2fae572b881b123a85ffa21595f36",
- "f71c27109c692c1b56bbdceb5b9d2865b3708dbc",
- "12a053384a9c0c88e405a06c27dcf49ada62eb2b",
- "b0e20b6e3116640286ed3a87a5713079b21f5189",
- "9b752e45573d4b39f4dbd3323cab82bf63326bfb",
- };
-
-static char *pt(unsigned char *md);
-int main(int argc, char *argv[])
- {
- int i,err=0;
- char **P,**R;
- char *p;
- unsigned char md[RIPEMD160_DIGEST_LENGTH];
-
- P=test;
- R=ret;
- i=1;
- while (*P != NULL)
- {
-#ifdef CHARSET_EBCDIC
- ebcdic2ascii((char *)*P, (char *)*P, strlen((char *)*P));
-#endif
- EVP_Digest(&(P[0][0]),strlen((char *)*P),md,NULL,EVP_ripemd160(), NULL);
- p=pt(md);
- if (strcmp(p,(char *)*R) != 0)
- {
- printf("error calculating RIPEMD160 on '%s'\n",*P);
- printf("got %s instead of %s\n",p,*R);
- err++;
- }
- else
- printf("test %d ok\n",i);
- i++;
- R++;
- P++;
- }
- EXIT(err);
- return(0);
- }
-
-static char *pt(unsigned char *md)
- {
- int i;
- static char buf[80];
-
- for (i=0; i<RIPEMD160_DIGEST_LENGTH; i++)
- sprintf(&(buf[i*2]),"%02x",md[i]);
- return(buf);
- }
-#endif