summaryrefslogtreecommitdiff
path: root/openssl/crypto/bn/asm/ia64.S
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/crypto/bn/asm/ia64.S')
-rw-r--r--openssl/crypto/bn/asm/ia64.S1555
1 files changed, 1555 insertions, 0 deletions
diff --git a/openssl/crypto/bn/asm/ia64.S b/openssl/crypto/bn/asm/ia64.S
new file mode 100644
index 00000000..951abc53
--- /dev/null
+++ b/openssl/crypto/bn/asm/ia64.S
@@ -0,0 +1,1555 @@
+.explicit
+.text
+.ident "ia64.S, Version 2.1"
+.ident "IA-64 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
+
+//
+// ====================================================================
+// Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+// project.
+//
+// Rights for redistribution and usage in source and binary forms are
+// granted according to the OpenSSL license. Warranty of any kind is
+// disclaimed.
+// ====================================================================
+//
+// Version 2.x is Itanium2 re-tune. Few words about how Itanum2 is
+// different from Itanium to this module viewpoint. Most notably, is it
+// "wider" than Itanium? Can you experience loop scalability as
+// discussed in commentary sections? Not really:-( Itanium2 has 6
+// integer ALU ports, i.e. it's 2 ports wider, but it's not enough to
+// spin twice as fast, as I need 8 IALU ports. Amount of floating point
+// ports is the same, i.e. 2, while I need 4. In other words, to this
+// module Itanium2 remains effectively as "wide" as Itanium. Yet it's
+// essentially different in respect to this module, and a re-tune was
+// required. Well, because some intruction latencies has changed. Most
+// noticeably those intensively used:
+//
+// Itanium Itanium2
+// ldf8 9 6 L2 hit
+// ld8 2 1 L1 hit
+// getf 2 5
+// xma[->getf] 7[+1] 4[+0]
+// add[->st8] 1[+1] 1[+0]
+//
+// What does it mean? You might ratiocinate that the original code
+// should run just faster... Because sum of latencies is smaller...
+// Wrong! Note that getf latency increased. This means that if a loop is
+// scheduled for lower latency (as they were), then it will suffer from
+// stall condition and the code will therefore turn anti-scalable, e.g.
+// original bn_mul_words spun at 5*n or 2.5 times slower than expected
+// on Itanium2! What to do? Reschedule loops for Itanium2? But then
+// Itanium would exhibit anti-scalability. So I've chosen to reschedule
+// for worst latency for every instruction aiming for best *all-round*
+// performance.
+
+// Q. How much faster does it get?
+// A. Here is the output from 'openssl speed rsa dsa' for vanilla
+// 0.9.6a compiled with gcc version 2.96 20000731 (Red Hat
+// Linux 7.1 2.96-81):
+//
+// sign verify sign/s verify/s
+// rsa 512 bits 0.0036s 0.0003s 275.3 2999.2
+// rsa 1024 bits 0.0203s 0.0011s 49.3 894.1
+// rsa 2048 bits 0.1331s 0.0040s 7.5 250.9
+// rsa 4096 bits 0.9270s 0.0147s 1.1 68.1
+// sign verify sign/s verify/s
+// dsa 512 bits 0.0035s 0.0043s 288.3 234.8
+// dsa 1024 bits 0.0111s 0.0135s 90.0 74.2
+//
+// And here is similar output but for this assembler
+// implementation:-)
+//
+// sign verify sign/s verify/s
+// rsa 512 bits 0.0021s 0.0001s 549.4 9638.5
+// rsa 1024 bits 0.0055s 0.0002s 183.8 4481.1
+// rsa 2048 bits 0.0244s 0.0006s 41.4 1726.3
+// rsa 4096 bits 0.1295s 0.0018s 7.7 561.5
+// sign verify sign/s verify/s
+// dsa 512 bits 0.0012s 0.0013s 891.9 756.6
+// dsa 1024 bits 0.0023s 0.0028s 440.4 376.2
+//
+// Yes, you may argue that it's not fair comparison as it's
+// possible to craft the C implementation with BN_UMULT_HIGH
+// inline assembler macro. But of course! Here is the output
+// with the macro:
+//
+// sign verify sign/s verify/s
+// rsa 512 bits 0.0020s 0.0002s 495.0 6561.0
+// rsa 1024 bits 0.0086s 0.0004s 116.2 2235.7
+// rsa 2048 bits 0.0519s 0.0015s 19.3 667.3
+// rsa 4096 bits 0.3464s 0.0053s 2.9 187.7
+// sign verify sign/s verify/s
+// dsa 512 bits 0.0016s 0.0020s 613.1 510.5
+// dsa 1024 bits 0.0045s 0.0054s 221.0 183.9
+//
+// My code is still way faster, huh:-) And I believe that even
+// higher performance can be achieved. Note that as keys get
+// longer, performance gain is larger. Why? According to the
+// profiler there is another player in the field, namely
+// BN_from_montgomery consuming larger and larger portion of CPU
+// time as keysize decreases. I therefore consider putting effort
+// to assembler implementation of the following routine:
+//
+// void bn_mul_add_mont (BN_ULONG *rp,BN_ULONG *np,int nl,BN_ULONG n0)
+// {
+// int i,j;
+// BN_ULONG v;
+//
+// for (i=0; i<nl; i++)
+// {
+// v=bn_mul_add_words(rp,np,nl,(rp[0]*n0)&BN_MASK2);
+// nrp++;
+// rp++;
+// if (((nrp[-1]+=v)&BN_MASK2) < v)
+// for (j=0; ((++nrp[j])&BN_MASK2) == 0; j++) ;
+// }
+// }
+//
+// It might as well be beneficial to implement even combaX
+// variants, as it appears as it can literally unleash the
+// performance (see comment section to bn_mul_comba8 below).
+//
+// And finally for your reference the output for 0.9.6a compiled
+// with SGIcc version 0.01.0-12 (keep in mind that for the moment
+// of this writing it's not possible to convince SGIcc to use
+// BN_UMULT_HIGH inline assembler macro, yet the code is fast,
+// i.e. for a compiler generated one:-):
+//
+// sign verify sign/s verify/s
+// rsa 512 bits 0.0022s 0.0002s 452.7 5894.3
+// rsa 1024 bits 0.0097s 0.0005s 102.7 2002.9
+// rsa 2048 bits 0.0578s 0.0017s 17.3 600.2
+// rsa 4096 bits 0.3838s 0.0061s 2.6 164.5
+// sign verify sign/s verify/s
+// dsa 512 bits 0.0018s 0.0022s 547.3 459.6
+// dsa 1024 bits 0.0051s 0.0062s 196.6 161.3
+//
+// Oh! Benchmarks were performed on 733MHz Lion-class Itanium
+// system running Redhat Linux 7.1 (very special thanks to Ray
+// McCaffity of Williams Communications for providing an account).
+//
+// Q. What's the heck with 'rum 1<<5' at the end of every function?
+// A. Well, by clearing the "upper FP registers written" bit of the
+// User Mask I want to excuse the kernel from preserving upper
+// (f32-f128) FP register bank over process context switch, thus
+// minimizing bus bandwidth consumption during the switch (i.e.
+// after PKI opration completes and the program is off doing
+// something else like bulk symmetric encryption). Having said
+// this, I also want to point out that it might be good idea
+// to compile the whole toolkit (as well as majority of the
+// programs for that matter) with -mfixed-range=f32-f127 command
+// line option. No, it doesn't prevent the compiler from writing
+// to upper bank, but at least discourages to do so. If you don't
+// like the idea you have the option to compile the module with
+// -Drum=nop.m in command line.
+//
+
+#if defined(_HPUX_SOURCE) && !defined(_LP64)
+#define ADDP addp4
+#else
+#define ADDP add
+#endif
+
+#if 1
+//
+// bn_[add|sub]_words routines.
+//
+// Loops are spinning in 2*(n+5) ticks on Itanuim (provided that the
+// data reside in L1 cache, i.e. 2 ticks away). It's possible to
+// compress the epilogue and get down to 2*n+6, but at the cost of
+// scalability (the neat feature of this implementation is that it
+// shall automagically spin in n+5 on "wider" IA-64 implementations:-)
+// I consider that the epilogue is short enough as it is to trade tiny
+// performance loss on Itanium for scalability.
+//
+// BN_ULONG bn_add_words(BN_ULONG *rp, BN_ULONG *ap, BN_ULONG *bp,int num)
+//
+.global bn_add_words#
+.proc bn_add_words#
+.align 64
+.skip 32 // makes the loop body aligned at 64-byte boundary
+bn_add_words:
+ .prologue
+ .save ar.pfs,r2
+{ .mii; alloc r2=ar.pfs,4,12,0,16
+ cmp4.le p6,p0=r35,r0 };;
+{ .mfb; mov r8=r0 // return value
+(p6) br.ret.spnt.many b0 };;
+
+{ .mib; sub r10=r35,r0,1
+ .save ar.lc,r3
+ mov r3=ar.lc
+ brp.loop.imp .L_bn_add_words_ctop,.L_bn_add_words_cend-16
+ }
+{ .mib; ADDP r14=0,r32 // rp
+ .save pr,r9
+ mov r9=pr };;
+ .body
+{ .mii; ADDP r15=0,r33 // ap
+ mov ar.lc=r10
+ mov ar.ec=6 }
+{ .mib; ADDP r16=0,r34 // bp
+ mov pr.rot=1<<16 };;
+
+.L_bn_add_words_ctop:
+{ .mii; (p16) ld8 r32=[r16],8 // b=*(bp++)
+ (p18) add r39=r37,r34
+ (p19) cmp.ltu.unc p56,p0=r40,r38 }
+{ .mfb; (p0) nop.m 0x0
+ (p0) nop.f 0x0
+ (p0) nop.b 0x0 }
+{ .mii; (p16) ld8 r35=[r15],8 // a=*(ap++)
+ (p58) cmp.eq.or p57,p0=-1,r41 // (p20)
+ (p58) add r41=1,r41 } // (p20)
+{ .mfb; (p21) st8 [r14]=r42,8 // *(rp++)=r
+ (p0) nop.f 0x0
+ br.ctop.sptk .L_bn_add_words_ctop };;
+.L_bn_add_words_cend:
+
+{ .mii;
+(p59) add r8=1,r8 // return value
+ mov pr=r9,0x1ffff
+ mov ar.lc=r3 }
+{ .mbb; nop.b 0x0
+ br.ret.sptk.many b0 };;
+.endp bn_add_words#
+
+//
+// BN_ULONG bn_sub_words(BN_ULONG *rp, BN_ULONG *ap, BN_ULONG *bp,int num)
+//
+.global bn_sub_words#
+.proc bn_sub_words#
+.align 64
+.skip 32 // makes the loop body aligned at 64-byte boundary
+bn_sub_words:
+ .prologue
+ .save ar.pfs,r2
+{ .mii; alloc r2=ar.pfs,4,12,0,16
+ cmp4.le p6,p0=r35,r0 };;
+{ .mfb; mov r8=r0 // return value
+(p6) br.ret.spnt.many b0 };;
+
+{ .mib; sub r10=r35,r0,1
+ .save ar.lc,r3
+ mov r3=ar.lc
+ brp.loop.imp .L_bn_sub_words_ctop,.L_bn_sub_words_cend-16
+ }
+{ .mib; ADDP r14=0,r32 // rp
+ .save pr,r9
+ mov r9=pr };;
+ .body
+{ .mii; ADDP r15=0,r33 // ap
+ mov ar.lc=r10
+ mov ar.ec=6 }
+{ .mib; ADDP r16=0,r34 // bp
+ mov pr.rot=1<<16 };;
+
+.L_bn_sub_words_ctop:
+{ .mii; (p16) ld8 r32=[r16],8 // b=*(bp++)
+ (p18) sub r39=r37,r34
+ (p19) cmp.gtu.unc p56,p0=r40,r38 }
+{ .mfb; (p0) nop.m 0x0
+ (p0) nop.f 0x0
+ (p0) nop.b 0x0 }
+{ .mii; (p16) ld8 r35=[r15],8 // a=*(ap++)
+ (p58) cmp.eq.or p57,p0=0,r41 // (p20)
+ (p58) add r41=-1,r41 } // (p20)
+{ .mbb; (p21) st8 [r14]=r42,8 // *(rp++)=r
+ (p0) nop.b 0x0
+ br.ctop.sptk .L_bn_sub_words_ctop };;
+.L_bn_sub_words_cend:
+
+{ .mii;
+(p59) add r8=1,r8 // return value
+ mov pr=r9,0x1ffff
+ mov ar.lc=r3 }
+{ .mbb; nop.b 0x0
+ br.ret.sptk.many b0 };;
+.endp bn_sub_words#
+#endif
+
+#if 0
+#define XMA_TEMPTATION
+#endif
+
+#if 1
+//
+// BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
+//
+.global bn_mul_words#
+.proc bn_mul_words#
+.align 64
+.skip 32 // makes the loop body aligned at 64-byte boundary
+bn_mul_words:
+ .prologue
+ .save ar.pfs,r2
+#ifdef XMA_TEMPTATION
+{ .mfi; alloc r2=ar.pfs,4,0,0,0 };;
+#else
+{ .mfi; alloc r2=ar.pfs,4,12,0,16 };;
+#endif
+{ .mib; mov r8=r0 // return value
+ cmp4.le p6,p0=r34,r0
+(p6) br.ret.spnt.many b0 };;
+
+{ .mii; sub r10=r34,r0,1
+ .save ar.lc,r3
+ mov r3=ar.lc
+ .save pr,r9
+ mov r9=pr };;
+
+ .body
+{ .mib; setf.sig f8=r35 // w
+ mov pr.rot=0x800001<<16
+ // ------^----- serves as (p50) at first (p27)
+ brp.loop.imp .L_bn_mul_words_ctop,.L_bn_mul_words_cend-16
+ }
+
+#ifndef XMA_TEMPTATION
+
+{ .mmi; ADDP r14=0,r32 // rp
+ ADDP r15=0,r33 // ap
+ mov ar.lc=r10 }
+{ .mmi; mov r40=0 // serves as r35 at first (p27)
+ mov ar.ec=13 };;
+
+// This loop spins in 2*(n+12) ticks. It's scheduled for data in Itanium
+// L2 cache (i.e. 9 ticks away) as floating point load/store instructions
+// bypass L1 cache and L2 latency is actually best-case scenario for
+// ldf8. The loop is not scalable and shall run in 2*(n+12) even on
+// "wider" IA-64 implementations. It's a trade-off here. n+24 loop
+// would give us ~5% in *overall* performance improvement on "wider"
+// IA-64, but would hurt Itanium for about same because of longer
+// epilogue. As it's a matter of few percents in either case I've
+// chosen to trade the scalability for development time (you can see
+// this very instruction sequence in bn_mul_add_words loop which in
+// turn is scalable).
+.L_bn_mul_words_ctop:
+{ .mfi; (p25) getf.sig r36=f52 // low
+ (p21) xmpy.lu f48=f37,f8
+ (p28) cmp.ltu p54,p50=r41,r39 }
+{ .mfi; (p16) ldf8 f32=[r15],8
+ (p21) xmpy.hu f40=f37,f8
+ (p0) nop.i 0x0 };;
+{ .mii; (p25) getf.sig r32=f44 // high
+ .pred.rel "mutex",p50,p54
+ (p50) add r40=r38,r35 // (p27)
+ (p54) add r40=r38,r35,1 } // (p27)
+{ .mfb; (p28) st8 [r14]=r41,8
+ (p0) nop.f 0x0
+ br.ctop.sptk .L_bn_mul_words_ctop };;
+.L_bn_mul_words_cend:
+
+{ .mii; nop.m 0x0
+.pred.rel "mutex",p51,p55
+(p51) add r8=r36,r0
+(p55) add r8=r36,r0,1 }
+{ .mfb; nop.m 0x0
+ nop.f 0x0
+ nop.b 0x0 }
+
+#else // XMA_TEMPTATION
+
+ setf.sig f37=r0 // serves as carry at (p18) tick
+ mov ar.lc=r10
+ mov ar.ec=5;;
+
+// Most of you examining this code very likely wonder why in the name
+// of Intel the following loop is commented out? Indeed, it looks so
+// neat that you find it hard to believe that it's something wrong
+// with it, right? The catch is that every iteration depends on the
+// result from previous one and the latter isn't available instantly.
+// The loop therefore spins at the latency of xma minus 1, or in other
+// words at 6*(n+4) ticks:-( Compare to the "production" loop above
+// that runs in 2*(n+11) where the low latency problem is worked around
+// by moving the dependency to one-tick latent interger ALU. Note that
+// "distance" between ldf8 and xma is not latency of ldf8, but the
+// *difference* between xma and ldf8 latencies.
+.L_bn_mul_words_ctop:
+{ .mfi; (p16) ldf8 f32=[r33],8
+ (p18) xma.hu f38=f34,f8,f39 }
+{ .mfb; (p20) stf8 [r32]=f37,8
+ (p18) xma.lu f35=f34,f8,f39
+ br.ctop.sptk .L_bn_mul_words_ctop };;
+.L_bn_mul_words_cend:
+
+ getf.sig r8=f41 // the return value
+
+#endif // XMA_TEMPTATION
+
+{ .mii; nop.m 0x0
+ mov pr=r9,0x1ffff
+ mov ar.lc=r3 }
+{ .mfb; rum 1<<5 // clear um.mfh
+ nop.f 0x0
+ br.ret.sptk.many b0 };;
+.endp bn_mul_words#
+#endif
+
+#if 1
+//
+// BN_ULONG bn_mul_add_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
+//
+.global bn_mul_add_words#
+.proc bn_mul_add_words#
+.align 64
+.skip 48 // makes the loop body aligned at 64-byte boundary
+bn_mul_add_words:
+ .prologue
+ .save ar.pfs,r2
+{ .mmi; alloc r2=ar.pfs,4,4,0,8
+ cmp4.le p6,p0=r34,r0
+ .save ar.lc,r3
+ mov r3=ar.lc };;
+{ .mib; mov r8=r0 // return value
+ sub r10=r34,r0,1
+(p6) br.ret.spnt.many b0 };;
+
+{ .mib; setf.sig f8=r35 // w
+ .save pr,r9
+ mov r9=pr
+ brp.loop.imp .L_bn_mul_add_words_ctop,.L_bn_mul_add_words_cend-16
+ }
+ .body
+{ .mmi; ADDP r14=0,r32 // rp
+ ADDP r15=0,r33 // ap
+ mov ar.lc=r10 }
+{ .mii; ADDP r16=0,r32 // rp copy
+ mov pr.rot=0x2001<<16
+ // ------^----- serves as (p40) at first (p27)
+ mov ar.ec=11 };;
+
+// This loop spins in 3*(n+10) ticks on Itanium and in 2*(n+10) on
+// Itanium 2. Yes, unlike previous versions it scales:-) Previous
+// version was peforming *all* additions in IALU and was starving
+// for those even on Itanium 2. In this version one addition is
+// moved to FPU and is folded with multiplication. This is at cost
+// of propogating the result from previous call to this subroutine
+// to L2 cache... In other words negligible even for shorter keys.
+// *Overall* performance improvement [over previous version] varies
+// from 11 to 22 percent depending on key length.
+.L_bn_mul_add_words_ctop:
+.pred.rel "mutex",p40,p42
+{ .mfi; (p23) getf.sig r36=f45 // low
+ (p20) xma.lu f42=f36,f8,f50 // low
+ (p40) add r39=r39,r35 } // (p27)
+{ .mfi; (p16) ldf8 f32=[r15],8 // *(ap++)
+ (p20) xma.hu f36=f36,f8,f50 // high
+ (p42) add r39=r39,r35,1 };; // (p27)
+{ .mmi; (p24) getf.sig r32=f40 // high
+ (p16) ldf8 f46=[r16],8 // *(rp1++)
+ (p40) cmp.ltu p41,p39=r39,r35 } // (p27)
+{ .mib; (p26) st8 [r14]=r39,8 // *(rp2++)
+ (p42) cmp.leu p41,p39=r39,r35 // (p27)
+ br.ctop.sptk .L_bn_mul_add_words_ctop};;
+.L_bn_mul_add_words_cend:
+
+{ .mmi; .pred.rel "mutex",p40,p42
+(p40) add r8=r35,r0
+(p42) add r8=r35,r0,1
+ mov pr=r9,0x1ffff }
+{ .mib; rum 1<<5 // clear um.mfh
+ mov ar.lc=r3
+ br.ret.sptk.many b0 };;
+.endp bn_mul_add_words#
+#endif
+
+#if 1
+//
+// void bn_sqr_words(BN_ULONG *rp, BN_ULONG *ap, int num)
+//
+.global bn_sqr_words#
+.proc bn_sqr_words#
+.align 64
+.skip 32 // makes the loop body aligned at 64-byte boundary
+bn_sqr_words:
+ .prologue
+ .save ar.pfs,r2
+{ .mii; alloc r2=ar.pfs,3,0,0,0
+ sxt4 r34=r34 };;
+{ .mii; cmp.le p6,p0=r34,r0
+ mov r8=r0 } // return value
+{ .mfb; ADDP r32=0,r32
+ nop.f 0x0
+(p6) br.ret.spnt.many b0 };;
+
+{ .mii; sub r10=r34,r0,1
+ .save ar.lc,r3
+ mov r3=ar.lc
+ .save pr,r9
+ mov r9=pr };;
+
+ .body
+{ .mib; ADDP r33=0,r33
+ mov pr.rot=1<<16
+ brp.loop.imp .L_bn_sqr_words_ctop,.L_bn_sqr_words_cend-16
+ }
+{ .mii; add r34=8,r32
+ mov ar.lc=r10
+ mov ar.ec=18 };;
+
+// 2*(n+17) on Itanium, (n+17) on "wider" IA-64 implementations. It's
+// possible to compress the epilogue (I'm getting tired to write this
+// comment over and over) and get down to 2*n+16 at the cost of
+// scalability. The decision will very likely be reconsidered after the
+// benchmark program is profiled. I.e. if perfomance gain on Itanium
+// will appear larger than loss on "wider" IA-64, then the loop should
+// be explicitely split and the epilogue compressed.
+.L_bn_sqr_words_ctop:
+{ .mfi; (p16) ldf8 f32=[r33],8
+ (p25) xmpy.lu f42=f41,f41
+ (p0) nop.i 0x0 }
+{ .mib; (p33) stf8 [r32]=f50,16
+ (p0) nop.i 0x0
+ (p0) nop.b 0x0 }
+{ .mfi; (p0) nop.m 0x0
+ (p25) xmpy.hu f52=f41,f41
+ (p0) nop.i 0x0 }
+{ .mib; (p33) stf8 [r34]=f60,16
+ (p0) nop.i 0x0
+ br.ctop.sptk .L_bn_sqr_words_ctop };;
+.L_bn_sqr_words_cend:
+
+{ .mii; nop.m 0x0
+ mov pr=r9,0x1ffff
+ mov ar.lc=r3 }
+{ .mfb; rum 1<<5 // clear um.mfh
+ nop.f 0x0
+ br.ret.sptk.many b0 };;
+.endp bn_sqr_words#
+#endif
+
+#if 1
+// Apparently we win nothing by implementing special bn_sqr_comba8.
+// Yes, it is possible to reduce the number of multiplications by
+// almost factor of two, but then the amount of additions would
+// increase by factor of two (as we would have to perform those
+// otherwise performed by xma ourselves). Normally we would trade
+// anyway as multiplications are way more expensive, but not this
+// time... Multiplication kernel is fully pipelined and as we drain
+// one 128-bit multiplication result per clock cycle multiplications
+// are effectively as inexpensive as additions. Special implementation
+// might become of interest for "wider" IA-64 implementation as you'll
+// be able to get through the multiplication phase faster (there won't
+// be any stall issues as discussed in the commentary section below and
+// you therefore will be able to employ all 4 FP units)... But these
+// Itanium days it's simply too hard to justify the effort so I just
+// drop down to bn_mul_comba8 code:-)
+//
+// void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a)
+//
+.global bn_sqr_comba8#
+.proc bn_sqr_comba8#
+.align 64
+bn_sqr_comba8:
+ .prologue
+ .save ar.pfs,r2
+#if defined(_HPUX_SOURCE) && !defined(_LP64)
+{ .mii; alloc r2=ar.pfs,2,1,0,0
+ addp4 r33=0,r33
+ addp4 r32=0,r32 };;
+{ .mii;
+#else
+{ .mii; alloc r2=ar.pfs,2,1,0,0
+#endif
+ mov r34=r33
+ add r14=8,r33 };;
+ .body
+{ .mii; add r17=8,r34
+ add r15=16,r33
+ add r18=16,r34 }
+{ .mfb; add r16=24,r33
+ br .L_cheat_entry_point8 };;
+.endp bn_sqr_comba8#
+#endif
+
+#if 1
+// I've estimated this routine to run in ~120 ticks, but in reality
+// (i.e. according to ar.itc) it takes ~160 ticks. Are those extra
+// cycles consumed for instructions fetch? Or did I misinterpret some
+// clause in Itanium µ-architecture manual? Comments are welcomed and
+// highly appreciated.
+//
+// On Itanium 2 it takes ~190 ticks. This is because of stalls on
+// result from getf.sig. I do nothing about it at this point for
+// reasons depicted below.
+//
+// However! It should be noted that even 160 ticks is darn good result
+// as it's over 10 (yes, ten, spelled as t-e-n) times faster than the
+// C version (compiled with gcc with inline assembler). I really
+// kicked compiler's butt here, didn't I? Yeah! This brings us to the
+// following statement. It's damn shame that this routine isn't called
+// very often nowadays! According to the profiler most CPU time is
+// consumed by bn_mul_add_words called from BN_from_montgomery. In
+// order to estimate what we're missing, I've compared the performance
+// of this routine against "traditional" implementation, i.e. against
+// following routine:
+//
+// void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+// { r[ 8]=bn_mul_words( &(r[0]),a,8,b[0]);
+// r[ 9]=bn_mul_add_words(&(r[1]),a,8,b[1]);
+// r[10]=bn_mul_add_words(&(r[2]),a,8,b[2]);
+// r[11]=bn_mul_add_words(&(r[3]),a,8,b[3]);
+// r[12]=bn_mul_add_words(&(r[4]),a,8,b[4]);
+// r[13]=bn_mul_add_words(&(r[5]),a,8,b[5]);
+// r[14]=bn_mul_add_words(&(r[6]),a,8,b[6]);
+// r[15]=bn_mul_add_words(&(r[7]),a,8,b[7]);
+// }
+//
+// The one below is over 8 times faster than the one above:-( Even
+// more reasons to "combafy" bn_mul_add_mont...
+//
+// And yes, this routine really made me wish there were an optimizing
+// assembler! It also feels like it deserves a dedication.
+//
+// To my wife for being there and to my kids...
+//
+// void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+//
+#define carry1 r14
+#define carry2 r15
+#define carry3 r34
+.global bn_mul_comba8#
+.proc bn_mul_comba8#
+.align 64
+bn_mul_comba8:
+ .prologue
+ .save ar.pfs,r2
+#if defined(_HPUX_SOURCE) && !defined(_LP64)
+{ .mii; alloc r2=ar.pfs,3,0,0,0
+ addp4 r33=0,r33
+ addp4 r34=0,r34 };;
+{ .mii; addp4 r32=0,r32
+#else
+{ .mii; alloc r2=ar.pfs,3,0,0,0
+#endif
+ add r14=8,r33
+ add r17=8,r34 }
+ .body
+{ .mii; add r15=16,r33
+ add r18=16,r34
+ add r16=24,r33 }
+.L_cheat_entry_point8:
+{ .mmi; add r19=24,r34
+
+ ldf8 f32=[r33],32 };;
+
+{ .mmi; ldf8 f120=[r34],32
+ ldf8 f121=[r17],32 }
+{ .mmi; ldf8 f122=[r18],32
+ ldf8 f123=[r19],32 };;
+{ .mmi; ldf8 f124=[r34]
+ ldf8 f125=[r17] }
+{ .mmi; ldf8 f126=[r18]
+ ldf8 f127=[r19] }
+
+{ .mmi; ldf8 f33=[r14],32
+ ldf8 f34=[r15],32 }
+{ .mmi; ldf8 f35=[r16],32;;
+ ldf8 f36=[r33] }
+{ .mmi; ldf8 f37=[r14]
+ ldf8 f38=[r15] }
+{ .mfi; ldf8 f39=[r16]
+// -------\ Entering multiplier's heaven /-------
+// ------------\ /------------
+// -----------------\ /-----------------
+// ----------------------\/----------------------
+ xma.hu f41=f32,f120,f0 }
+{ .mfi; xma.lu f40=f32,f120,f0 };; // (*)
+{ .mfi; xma.hu f51=f32,f121,f0 }
+{ .mfi; xma.lu f50=f32,f121,f0 };;
+{ .mfi; xma.hu f61=f32,f122,f0 }
+{ .mfi; xma.lu f60=f32,f122,f0 };;
+{ .mfi; xma.hu f71=f32,f123,f0 }
+{ .mfi; xma.lu f70=f32,f123,f0 };;
+{ .mfi; xma.hu f81=f32,f124,f0 }
+{ .mfi; xma.lu f80=f32,f124,f0 };;
+{ .mfi; xma.hu f91=f32,f125,f0 }
+{ .mfi; xma.lu f90=f32,f125,f0 };;
+{ .mfi; xma.hu f101=f32,f126,f0 }
+{ .mfi; xma.lu f100=f32,f126,f0 };;
+{ .mfi; xma.hu f111=f32,f127,f0 }
+{ .mfi; xma.lu f110=f32,f127,f0 };;//
+// (*) You can argue that splitting at every second bundle would
+// prevent "wider" IA-64 implementations from achieving the peak
+// performance. Well, not really... The catch is that if you
+// intend to keep 4 FP units busy by splitting at every fourth
+// bundle and thus perform these 16 multiplications in 4 ticks,
+// the first bundle *below* would stall because the result from
+// the first xma bundle *above* won't be available for another 3
+// ticks (if not more, being an optimist, I assume that "wider"
+// implementation will have same latency:-). This stall will hold
+// you back and the performance would be as if every second bundle
+// were split *anyway*...
+{ .mfi; getf.sig r16=f40
+ xma.hu f42=f33,f120,f41
+ add r33=8,r32 }
+{ .mfi; xma.lu f41=f33,f120,f41 };;
+{ .mfi; getf.sig r24=f50
+ xma.hu f52=f33,f121,f51 }
+{ .mfi; xma.lu f51=f33,f121,f51 };;
+{ .mfi; st8 [r32]=r16,16
+ xma.hu f62=f33,f122,f61 }
+{ .mfi; xma.lu f61=f33,f122,f61 };;
+{ .mfi; xma.hu f72=f33,f123,f71 }
+{ .mfi; xma.lu f71=f33,f123,f71 };;
+{ .mfi; xma.hu f82=f33,f124,f81 }
+{ .mfi; xma.lu f81=f33,f124,f81 };;
+{ .mfi; xma.hu f92=f33,f125,f91 }
+{ .mfi; xma.lu f91=f33,f125,f91 };;
+{ .mfi; xma.hu f102=f33,f126,f101 }
+{ .mfi; xma.lu f101=f33,f126,f101 };;
+{ .mfi; xma.hu f112=f33,f127,f111 }
+{ .mfi; xma.lu f111=f33,f127,f111 };;//
+//-------------------------------------------------//
+{ .mfi; getf.sig r25=f41
+ xma.hu f43=f34,f120,f42 }
+{ .mfi; xma.lu f42=f34,f120,f42 };;
+{ .mfi; getf.sig r16=f60
+ xma.hu f53=f34,f121,f52 }
+{ .mfi; xma.lu f52=f34,f121,f52 };;
+{ .mfi; getf.sig r17=f51
+ xma.hu f63=f34,f122,f62
+ add r25=r25,r24 }
+{ .mfi; xma.lu f62=f34,f122,f62
+ mov carry1=0 };;
+{ .mfi; cmp.ltu p6,p0=r25,r24
+ xma.hu f73=f34,f123,f72 }
+{ .mfi; xma.lu f72=f34,f123,f72 };;
+{ .mfi; st8 [r33]=r25,16
+ xma.hu f83=f34,f124,f82
+(p6) add carry1=1,carry1 }
+{ .mfi; xma.lu f82=f34,f124,f82 };;
+{ .mfi; xma.hu f93=f34,f125,f92 }
+{ .mfi; xma.lu f92=f34,f125,f92 };;
+{ .mfi; xma.hu f103=f34,f126,f102 }
+{ .mfi; xma.lu f102=f34,f126,f102 };;
+{ .mfi; xma.hu f113=f34,f127,f112 }
+{ .mfi; xma.lu f112=f34,f127,f112 };;//
+//-------------------------------------------------//
+{ .mfi; getf.sig r18=f42
+ xma.hu f44=f35,f120,f43
+ add r17=r17,r16 }
+{ .mfi; xma.lu f43=f35,f120,f43 };;
+{ .mfi; getf.sig r24=f70
+ xma.hu f54=f35,f121,f53 }
+{ .mfi; mov carry2=0
+ xma.lu f53=f35,f121,f53 };;
+{ .mfi; getf.sig r25=f61
+ xma.hu f64=f35,f122,f63
+ cmp.ltu p7,p0=r17,r16 }
+{ .mfi; add r18=r18,r17
+ xma.lu f63=f35,f122,f63 };;
+{ .mfi; getf.sig r26=f52
+ xma.hu f74=f35,f123,f73
+(p7) add carry2=1,carry2 }
+{ .mfi; cmp.ltu p7,p0=r18,r17
+ xma.lu f73=f35,f123,f73
+ add r18=r18,carry1 };;
+{ .mfi;
+ xma.hu f84=f35,f124,f83
+(p7) add carry2=1,carry2 }
+{ .mfi; cmp.ltu p7,p0=r18,carry1
+ xma.lu f83=f35,f124,f83 };;
+{ .mfi; st8 [r32]=r18,16
+ xma.hu f94=f35,f125,f93
+(p7) add carry2=1,carry2 }
+{ .mfi; xma.lu f93=f35,f125,f93 };;
+{ .mfi; xma.hu f104=f35,f126,f103 }
+{ .mfi; xma.lu f103=f35,f126,f103 };;
+{ .mfi; xma.hu f114=f35,f127,f113 }
+{ .mfi; mov carry1=0
+ xma.lu f113=f35,f127,f113
+ add r25=r25,r24 };;//
+//-------------------------------------------------//
+{ .mfi; getf.sig r27=f43
+ xma.hu f45=f36,f120,f44
+ cmp.ltu p6,p0=r25,r24 }
+{ .mfi; xma.lu f44=f36,f120,f44
+ add r26=r26,r25 };;
+{ .mfi; getf.sig r16=f80
+ xma.hu f55=f36,f121,f54
+(p6) add carry1=1,carry1 }
+{ .mfi; xma.lu f54=f36,f121,f54 };;
+{ .mfi; getf.sig r17=f71
+ xma.hu f65=f36,f122,f64
+ cmp.ltu p6,p0=r26,r25 }
+{ .mfi; xma.lu f64=f36,f122,f64
+ add r27=r27,r26 };;
+{ .mfi; getf.sig r18=f62
+ xma.hu f75=f36,f123,f74
+(p6) add carry1=1,carry1 }
+{ .mfi; cmp.ltu p6,p0=r27,r26
+ xma.lu f74=f36,f123,f74
+ add r27=r27,carry2 };;
+{ .mfi; getf.sig r19=f53
+ xma.hu f85=f36,f124,f84
+(p6) add carry1=1,carry1 }
+{ .mfi; xma.lu f84=f36,f124,f84
+ cmp.ltu p6,p0=r27,carry2 };;
+{ .mfi; st8 [r33]=r27,16
+ xma.hu f95=f36,f125,f94
+(p6) add carry1=1,carry1 }
+{ .mfi; xma.lu f94=f36,f125,f94 };;
+{ .mfi; xma.hu f105=f36,f126,f104 }
+{ .mfi; mov carry2=0
+ xma.lu f104=f36,f126,f104
+ add r17=r17,r16 };;
+{ .mfi; xma.hu f115=f36,f127,f114
+ cmp.ltu p7,p0=r17,r16 }
+{ .mfi; xma.lu f114=f36,f127,f114
+ add r18=r18,r17 };;//
+//-------------------------------------------------//
+{ .mfi; getf.sig r20=f44
+ xma.hu f46=f37,f120,f45
+(p7) add carry2=1,carry2 }
+{ .mfi; cmp.ltu p7,p0=r18,r17
+ xma.lu f45=f37,f120,f45
+ add r19=r19,r18 };;
+{ .mfi; getf.sig r24=f90
+ xma.hu f56=f37,f121,f55 }
+{ .mfi; xma.lu f55=f37,f121,f55 };;
+{ .mfi; getf.sig r25=f81
+ xma.hu f66=f37,f122,f65
+(p7) add carry2=1,carry2 }
+{ .mfi; cmp.ltu p7,p0=r19,r18
+ xma.lu f65=f37,f122,f65
+ add r20=r20,r19 };;
+{ .mfi; getf.sig r26=f72
+ xma.hu f76=f37,f123,f75
+(p7) add carry2=1,carry2 }
+{ .mfi; cmp.ltu p7,p0=r20,r19
+ xma.lu f75=f37,f123,f75
+ add r20=r20,carry1 };;
+{ .mfi; getf.sig r27=f63
+ xma.hu f86=f37,f124,f85
+(p7) add carry2=1,carry2 }
+{ .mfi; xma.lu f85=f37,f124,f85
+ cmp.ltu p7,p0=r20,carry1 };;
+{ .mfi; getf.sig r28=f54
+ xma.hu f96=f37,f125,f95
+(p7) add carry2=1,carry2 }
+{ .mfi; st8 [r32]=r20,16
+ xma.lu f95=f37,f125,f95 };;
+{ .mfi; xma.hu f106=f37,f126,f105 }
+{ .mfi; mov carry1=0
+ xma.lu f105=f37,f126,f105
+ add r25=r25,r24 };;
+{ .mfi; xma.hu f116=f37,f127,f115
+ cmp.ltu p6,p0=r25,r24 }
+{ .mfi; xma.lu f115=f37,f127,f115
+ add r26=r26,r25 };;//
+//-------------------------------------------------//
+{ .mfi; getf.sig r29=f45
+ xma.hu f47=f38,f120,f46
+(p6) add carry1=1,carry1 }
+{ .mfi; cmp.ltu p6,p0=r26,r25
+ xma.lu f46=f38,f120,f46
+ add r27=r27,r26 };;
+{ .mfi; getf.sig r16=f100
+ xma.hu f57=f38,f121,f56
+(p6) add carry1=1,carry1 }
+{ .mfi; cmp.ltu p6,p0=r27,r26
+ xma.lu f56=f38,f121,f56
+ add r28=r28,r27 };;
+{ .mfi; getf.sig r17=f91
+ xma.hu f67=f38,f122,f66
+(p6) add carry1=1,carry1 }
+{ .mfi; cmp.ltu p6,p0=r28,r27
+ xma.lu f66=f38,f122,f66
+ add r29=r29,r28 };;
+{ .mfi; getf.sig r18=f82
+ xma.hu f77=f38,f123,f76
+(p6) add carry1=1,carry1 }
+{ .mfi; cmp.ltu p6,p0=r29,r28
+ xma.lu f76=f38,f123,f76
+ add r29=r29,carry2 };;
+{ .mfi; getf.sig r19=f73
+ xma.hu f87=f38,f124,f86
+(p6) add carry1=1,carry1 }
+{ .mfi; xma.lu f86=f38,f124,f86
+ cmp.ltu p6,p0=r29,carry2 };;
+{ .mfi; getf.sig r20=f64
+ xma.hu f97=f38,f125,f96
+(p6) add carry1=1,carry1 }
+{ .mfi; st8 [r33]=r29,16
+ xma.lu f96=f38,f125,f96 };;
+{ .mfi; getf.sig r21=f55
+ xma.hu f107=f38,f126,f106 }
+{ .mfi; mov carry2=0
+ xma.lu f106=f38,f126,f106
+ add r17=r17,r16 };;
+{ .mfi; xma.hu f117=f38,f127,f116
+ cmp.ltu p7,p0=r17,r16 }
+{ .mfi; xma.lu f116=f38,f127,f116
+ add r18=r18,r17 };;//
+//-------------------------------------------------//
+{ .mfi; getf.sig r22=f46
+ xma.hu f48=f39,f120,f47
+(p7) add carry2=1,carry2 }
+{ .mfi; cmp.ltu p7,p0=r18,r17
+ xma.lu f47=f39,f120,f47
+ add r19=r19,r18 };;
+{ .mfi; getf.sig r24=f110
+ xma.hu f58=f39,f121,f57
+(p7) add carry2=1,carry2 }
+{ .mfi; cmp.ltu p7,p0=r19,r18
+ xma.lu f57=f39,f121,f57
+ add r20=r20,r19 };;
+{ .mfi; getf.sig r25=f101
+ xma.hu f68=f39,f122,f67
+(p7) add carry2=1,carry2 }
+{ .mfi; cmp.ltu p7,p0=r20,r19
+ xma.lu f67=f39,f122,f67
+ add r21=r21,r20 };;
+{ .mfi; getf.sig r26=f92
+ xma.hu f78=f39,f123,f77
+(p7) add carry2=1,carry2 }
+{ .mfi; cmp.ltu p7,p0=r21,r20
+ xma.lu f77=f39,f123,f77
+ add r22=r22,r21 };;
+{ .mfi; getf.sig r27=f83
+ xma.hu f88=f39,f124,f87
+(p7) add carry2=1,carry2 }
+{ .mfi; cmp.ltu p7,p0=r22,r21
+ xma.lu f87=f39,f124,f87
+ add r22=r22,carry1 };;
+{ .mfi; getf.sig r28=f74
+ xma.hu f98=f39,f125,f97
+(p7) add carry2=1,carry2 }
+{ .mfi; xma.lu f97=f39,f125,f97
+ cmp.ltu p7,p0=r22,carry1 };;
+{ .mfi; getf.sig r29=f65
+ xma.hu f108=f39,f126,f107
+(p7) add carry2=1,carry2 }
+{ .mfi; st8 [r32]=r22,16
+ xma.lu f107=f39,f126,f107 };;
+{ .mfi; getf.sig r30=f56
+ xma.hu f118=f39,f127,f117 }
+{ .mfi; xma.lu f117=f39,f127,f117 };;//
+//-------------------------------------------------//
+// Leaving muliplier's heaven... Quite a ride, huh?
+
+{ .mii; getf.sig r31=f47
+ add r25=r25,r24
+ mov carry1=0 };;
+{ .mii; getf.sig r16=f111
+ cmp.ltu p6,p0=r25,r24
+ add r26=r26,r25 };;
+{ .mfb; getf.sig r17=f102 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r26,r25
+ add r27=r27,r26 };;
+{ .mfb; nop.m 0x0 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r27,r26
+ add r28=r28,r27 };;
+{ .mii; getf.sig r18=f93
+ add r17=r17,r16
+ mov carry3=0 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r28,r27
+ add r29=r29,r28 };;
+{ .mii; getf.sig r19=f84
+ cmp.ltu p7,p0=r17,r16 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r29,r28
+ add r30=r30,r29 };;
+{ .mii; getf.sig r20=f75
+ add r18=r18,r17 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r30,r29
+ add r31=r31,r30 };;
+{ .mfb; getf.sig r21=f66 }
+{ .mii; (p7) add carry3=1,carry3
+ cmp.ltu p7,p0=r18,r17
+ add r19=r19,r18 }
+{ .mfb; nop.m 0x0 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r31,r30
+ add r31=r31,carry2 };;
+{ .mfb; getf.sig r22=f57 }
+{ .mii; (p7) add carry3=1,carry3
+ cmp.ltu p7,p0=r19,r18
+ add r20=r20,r19 }
+{ .mfb; nop.m 0x0 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r31,carry2 };;
+{ .mfb; getf.sig r23=f48 }
+{ .mii; (p7) add carry3=1,carry3
+ cmp.ltu p7,p0=r20,r19
+ add r21=r21,r20 }
+{ .mii;
+(p6) add carry1=1,carry1 }
+{ .mfb; st8 [r33]=r31,16 };;
+
+{ .mfb; getf.sig r24=f112 }
+{ .mii; (p7) add carry3=1,carry3
+ cmp.ltu p7,p0=r21,r20
+ add r22=r22,r21 };;
+{ .mfb; getf.sig r25=f103 }
+{ .mii; (p7) add carry3=1,carry3
+ cmp.ltu p7,p0=r22,r21
+ add r23=r23,r22 };;
+{ .mfb; getf.sig r26=f94 }
+{ .mii; (p7) add carry3=1,carry3
+ cmp.ltu p7,p0=r23,r22
+ add r23=r23,carry1 };;
+{ .mfb; getf.sig r27=f85 }
+{ .mii; (p7) add carry3=1,carry3
+ cmp.ltu p7,p8=r23,carry1};;
+{ .mii; getf.sig r28=f76
+ add r25=r25,r24
+ mov carry1=0 }
+{ .mii; st8 [r32]=r23,16
+ (p7) add carry2=1,carry3
+ (p8) add carry2=0,carry3 };;
+
+{ .mfb; nop.m 0x0 }
+{ .mii; getf.sig r29=f67
+ cmp.ltu p6,p0=r25,r24
+ add r26=r26,r25 };;
+{ .mfb; getf.sig r30=f58 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r26,r25
+ add r27=r27,r26 };;
+{ .mfb; getf.sig r16=f113 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r27,r26
+ add r28=r28,r27 };;
+{ .mfb; getf.sig r17=f104 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r28,r27
+ add r29=r29,r28 };;
+{ .mfb; getf.sig r18=f95 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r29,r28
+ add r30=r30,r29 };;
+{ .mii; getf.sig r19=f86
+ add r17=r17,r16
+ mov carry3=0 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r30,r29
+ add r30=r30,carry2 };;
+{ .mii; getf.sig r20=f77
+ cmp.ltu p7,p0=r17,r16
+ add r18=r18,r17 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r30,carry2 };;
+{ .mfb; getf.sig r21=f68 }
+{ .mii; st8 [r33]=r30,16
+(p6) add carry1=1,carry1 };;
+
+{ .mfb; getf.sig r24=f114 }
+{ .mii; (p7) add carry3=1,carry3
+ cmp.ltu p7,p0=r18,r17
+ add r19=r19,r18 };;
+{ .mfb; getf.sig r25=f105 }
+{ .mii; (p7) add carry3=1,carry3
+ cmp.ltu p7,p0=r19,r18
+ add r20=r20,r19 };;
+{ .mfb; getf.sig r26=f96 }
+{ .mii; (p7) add carry3=1,carry3
+ cmp.ltu p7,p0=r20,r19
+ add r21=r21,r20 };;
+{ .mfb; getf.sig r27=f87 }
+{ .mii; (p7) add carry3=1,carry3
+ cmp.ltu p7,p0=r21,r20
+ add r21=r21,carry1 };;
+{ .mib; getf.sig r28=f78
+ add r25=r25,r24 }
+{ .mib; (p7) add carry3=1,carry3
+ cmp.ltu p7,p8=r21,carry1};;
+{ .mii; st8 [r32]=r21,16
+ (p7) add carry2=1,carry3
+ (p8) add carry2=0,carry3 }
+
+{ .mii; mov carry1=0
+ cmp.ltu p6,p0=r25,r24
+ add r26=r26,r25 };;
+{ .mfb; getf.sig r16=f115 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r26,r25
+ add r27=r27,r26 };;
+{ .mfb; getf.sig r17=f106 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r27,r26
+ add r28=r28,r27 };;
+{ .mfb; getf.sig r18=f97 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r28,r27
+ add r28=r28,carry2 };;
+{ .mib; getf.sig r19=f88
+ add r17=r17,r16 }
+{ .mib;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r28,carry2 };;
+{ .mii; st8 [r33]=r28,16
+(p6) add carry1=1,carry1 }
+
+{ .mii; mov carry2=0
+ cmp.ltu p7,p0=r17,r16
+ add r18=r18,r17 };;
+{ .mfb; getf.sig r24=f116 }
+{ .mii; (p7) add carry2=1,carry2
+ cmp.ltu p7,p0=r18,r17
+ add r19=r19,r18 };;
+{ .mfb; getf.sig r25=f107 }
+{ .mii; (p7) add carry2=1,carry2
+ cmp.ltu p7,p0=r19,r18
+ add r19=r19,carry1 };;
+{ .mfb; getf.sig r26=f98 }
+{ .mii; (p7) add carry2=1,carry2
+ cmp.ltu p7,p0=r19,carry1};;
+{ .mii; st8 [r32]=r19,16
+ (p7) add carry2=1,carry2 }
+
+{ .mfb; add r25=r25,r24 };;
+
+{ .mfb; getf.sig r16=f117 }
+{ .mii; mov carry1=0
+ cmp.ltu p6,p0=r25,r24
+ add r26=r26,r25 };;
+{ .mfb; getf.sig r17=f108 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r26,r25
+ add r26=r26,carry2 };;
+{ .mfb; nop.m 0x0 }
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r26,carry2 };;
+{ .mii; st8 [r33]=r26,16
+(p6) add carry1=1,carry1 }
+
+{ .mfb; add r17=r17,r16 };;
+{ .mfb; getf.sig r24=f118 }
+{ .mii; mov carry2=0
+ cmp.ltu p7,p0=r17,r16
+ add r17=r17,carry1 };;
+{ .mii; (p7) add carry2=1,carry2
+ cmp.ltu p7,p0=r17,carry1};;
+{ .mii; st8 [r32]=r17
+ (p7) add carry2=1,carry2 };;
+{ .mfb; add r24=r24,carry2 };;
+{ .mib; st8 [r33]=r24 }
+
+{ .mib; rum 1<<5 // clear um.mfh
+ br.ret.sptk.many b0 };;
+.endp bn_mul_comba8#
+#undef carry3
+#undef carry2
+#undef carry1
+#endif
+
+#if 1
+// It's possible to make it faster (see comment to bn_sqr_comba8), but
+// I reckon it doesn't worth the effort. Basically because the routine
+// (actually both of them) practically never called... So I just play
+// same trick as with bn_sqr_comba8.
+//
+// void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a)
+//
+.global bn_sqr_comba4#
+.proc bn_sqr_comba4#
+.align 64
+bn_sqr_comba4:
+ .prologue
+ .save ar.pfs,r2
+#if defined(_HPUX_SOURCE) && !defined(_LP64)
+{ .mii; alloc r2=ar.pfs,2,1,0,0
+ addp4 r32=0,r32
+ addp4 r33=0,r33 };;
+{ .mii;
+#else
+{ .mii; alloc r2=ar.pfs,2,1,0,0
+#endif
+ mov r34=r33
+ add r14=8,r33 };;
+ .body
+{ .mii; add r17=8,r34
+ add r15=16,r33
+ add r18=16,r34 }
+{ .mfb; add r16=24,r33
+ br .L_cheat_entry_point4 };;
+.endp bn_sqr_comba4#
+#endif
+
+#if 1
+// Runs in ~115 cycles and ~4.5 times faster than C. Well, whatever...
+//
+// void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+//
+#define carry1 r14
+#define carry2 r15
+.global bn_mul_comba4#
+.proc bn_mul_comba4#
+.align 64
+bn_mul_comba4:
+ .prologue
+ .save ar.pfs,r2
+#if defined(_HPUX_SOURCE) && !defined(_LP64)
+{ .mii; alloc r2=ar.pfs,3,0,0,0
+ addp4 r33=0,r33
+ addp4 r34=0,r34 };;
+{ .mii; addp4 r32=0,r32
+#else
+{ .mii; alloc r2=ar.pfs,3,0,0,0
+#endif
+ add r14=8,r33
+ add r17=8,r34 }
+ .body
+{ .mii; add r15=16,r33
+ add r18=16,r34
+ add r16=24,r33 };;
+.L_cheat_entry_point4:
+{ .mmi; add r19=24,r34
+
+ ldf8 f32=[r33] }
+
+{ .mmi; ldf8 f120=[r34]
+ ldf8 f121=[r17] };;
+{ .mmi; ldf8 f122=[r18]
+ ldf8 f123=[r19] }
+
+{ .mmi; ldf8 f33=[r14]
+ ldf8 f34=[r15] }
+{ .mfi; ldf8 f35=[r16]
+
+ xma.hu f41=f32,f120,f0 }
+{ .mfi; xma.lu f40=f32,f120,f0 };;
+{ .mfi; xma.hu f51=f32,f121,f0 }
+{ .mfi; xma.lu f50=f32,f121,f0 };;
+{ .mfi; xma.hu f61=f32,f122,f0 }
+{ .mfi; xma.lu f60=f32,f122,f0 };;
+{ .mfi; xma.hu f71=f32,f123,f0 }
+{ .mfi; xma.lu f70=f32,f123,f0 };;//
+// Major stall takes place here, and 3 more places below. Result from
+// first xma is not available for another 3 ticks.
+{ .mfi; getf.sig r16=f40
+ xma.hu f42=f33,f120,f41
+ add r33=8,r32 }
+{ .mfi; xma.lu f41=f33,f120,f41 };;
+{ .mfi; getf.sig r24=f50
+ xma.hu f52=f33,f121,f51 }
+{ .mfi; xma.lu f51=f33,f121,f51 };;
+{ .mfi; st8 [r32]=r16,16
+ xma.hu f62=f33,f122,f61 }
+{ .mfi; xma.lu f61=f33,f122,f61 };;
+{ .mfi; xma.hu f72=f33,f123,f71 }
+{ .mfi; xma.lu f71=f33,f123,f71 };;//
+//-------------------------------------------------//
+{ .mfi; getf.sig r25=f41
+ xma.hu f43=f34,f120,f42 }
+{ .mfi; xma.lu f42=f34,f120,f42 };;
+{ .mfi; getf.sig r16=f60
+ xma.hu f53=f34,f121,f52 }
+{ .mfi; xma.lu f52=f34,f121,f52 };;
+{ .mfi; getf.sig r17=f51
+ xma.hu f63=f34,f122,f62
+ add r25=r25,r24 }
+{ .mfi; mov carry1=0
+ xma.lu f62=f34,f122,f62 };;
+{ .mfi; st8 [r33]=r25,16
+ xma.hu f73=f34,f123,f72
+ cmp.ltu p6,p0=r25,r24 }
+{ .mfi; xma.lu f72=f34,f123,f72 };;//
+//-------------------------------------------------//
+{ .mfi; getf.sig r18=f42
+ xma.hu f44=f35,f120,f43
+(p6) add carry1=1,carry1 }
+{ .mfi; add r17=r17,r16
+ xma.lu f43=f35,f120,f43
+ mov carry2=0 };;
+{ .mfi; getf.sig r24=f70
+ xma.hu f54=f35,f121,f53
+ cmp.ltu p7,p0=r17,r16 }
+{ .mfi; xma.lu f53=f35,f121,f53 };;
+{ .mfi; getf.sig r25=f61
+ xma.hu f64=f35,f122,f63
+ add r18=r18,r17 }
+{ .mfi; xma.lu f63=f35,f122,f63
+(p7) add carry2=1,carry2 };;
+{ .mfi; getf.sig r26=f52
+ xma.hu f74=f35,f123,f73
+ cmp.ltu p7,p0=r18,r17 }
+{ .mfi; xma.lu f73=f35,f123,f73
+ add r18=r18,carry1 };;
+//-------------------------------------------------//
+{ .mii; st8 [r32]=r18,16
+(p7) add carry2=1,carry2
+ cmp.ltu p7,p0=r18,carry1 };;
+
+{ .mfi; getf.sig r27=f43 // last major stall
+(p7) add carry2=1,carry2 };;
+{ .mii; getf.sig r16=f71
+ add r25=r25,r24
+ mov carry1=0 };;
+{ .mii; getf.sig r17=f62
+ cmp.ltu p6,p0=r25,r24
+ add r26=r26,r25 };;
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r26,r25
+ add r27=r27,r26 };;
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r27,r26
+ add r27=r27,carry2 };;
+{ .mii; getf.sig r18=f53
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r27,carry2 };;
+{ .mfi; st8 [r33]=r27,16
+(p6) add carry1=1,carry1 }
+
+{ .mii; getf.sig r19=f44
+ add r17=r17,r16
+ mov carry2=0 };;
+{ .mii; getf.sig r24=f72
+ cmp.ltu p7,p0=r17,r16
+ add r18=r18,r17 };;
+{ .mii; (p7) add carry2=1,carry2
+ cmp.ltu p7,p0=r18,r17
+ add r19=r19,r18 };;
+{ .mii; (p7) add carry2=1,carry2
+ cmp.ltu p7,p0=r19,r18
+ add r19=r19,carry1 };;
+{ .mii; getf.sig r25=f63
+ (p7) add carry2=1,carry2
+ cmp.ltu p7,p0=r19,carry1};;
+{ .mii; st8 [r32]=r19,16
+ (p7) add carry2=1,carry2 }
+
+{ .mii; getf.sig r26=f54
+ add r25=r25,r24
+ mov carry1=0 };;
+{ .mii; getf.sig r16=f73
+ cmp.ltu p6,p0=r25,r24
+ add r26=r26,r25 };;
+{ .mii;
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r26,r25
+ add r26=r26,carry2 };;
+{ .mii; getf.sig r17=f64
+(p6) add carry1=1,carry1
+ cmp.ltu p6,p0=r26,carry2 };;
+{ .mii; st8 [r33]=r26,16
+(p6) add carry1=1,carry1 }
+
+{ .mii; getf.sig r24=f74
+ add r17=r17,r16
+ mov carry2=0 };;
+{ .mii; cmp.ltu p7,p0=r17,r16
+ add r17=r17,carry1 };;
+
+{ .mii; (p7) add carry2=1,carry2
+ cmp.ltu p7,p0=r17,carry1};;
+{ .mii; st8 [r32]=r17,16
+ (p7) add carry2=1,carry2 };;
+
+{ .mii; add r24=r24,carry2 };;
+{ .mii; st8 [r33]=r24 }
+
+{ .mib; rum 1<<5 // clear um.mfh
+ br.ret.sptk.many b0 };;
+.endp bn_mul_comba4#
+#undef carry2
+#undef carry1
+#endif
+
+#if 1
+//
+// BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d)
+//
+// In the nutshell it's a port of my MIPS III/IV implementation.
+//
+#define AT r14
+#define H r16
+#define HH r20
+#define L r17
+#define D r18
+#define DH r22
+#define I r21
+
+#if 0
+// Some preprocessors (most notably HP-UX) appear to be allergic to
+// macros enclosed to parenthesis [as these three were].
+#define cont p16
+#define break p0 // p20
+#define equ p24
+#else
+cont=p16
+break=p0
+equ=p24
+#endif
+
+.global abort#
+.global bn_div_words#
+.proc bn_div_words#
+.align 64
+bn_div_words:
+ .prologue
+ .save ar.pfs,r2
+{ .mii; alloc r2=ar.pfs,3,5,0,8
+ .save b0,r3
+ mov r3=b0
+ .save pr,r10
+ mov r10=pr };;
+{ .mmb; cmp.eq p6,p0=r34,r0
+ mov r8=-1
+(p6) br.ret.spnt.many b0 };;
+
+ .body
+{ .mii; mov H=r32 // save h
+ mov ar.ec=0 // don't rotate at exit
+ mov pr.rot=0 }
+{ .mii; mov L=r33 // save l
+ mov r36=r0 };;
+
+.L_divw_shift: // -vv- note signed comparison
+{ .mfi; (p0) cmp.lt p16,p0=r0,r34 // d
+ (p0) shladd r33=r34,1,r0 }
+{ .mfb; (p0) add r35=1,r36
+ (p0) nop.f 0x0
+(p16) br.wtop.dpnt .L_divw_shift };;
+
+{ .mii; mov D=r34
+ shr.u DH=r34,32
+ sub r35=64,r36 };;
+{ .mii; setf.sig f7=DH
+ shr.u AT=H,r35
+ mov I=r36 };;
+{ .mib; cmp.ne p6,p0=r0,AT
+ shl H=H,r36
+(p6) br.call.spnt.clr b0=abort };; // overflow, die...
+
+{ .mfi; fcvt.xuf.s1 f7=f7
+ shr.u AT=L,r35 };;
+{ .mii; shl L=L,r36
+ or H=H,AT };;
+
+{ .mii; nop.m 0x0
+ cmp.leu p6,p0=D,H;;
+(p6) sub H=H,D }
+
+{ .mlx; setf.sig f14=D
+ movl AT=0xffffffff };;
+///////////////////////////////////////////////////////////
+{ .mii; setf.sig f6=H
+ shr.u HH=H,32;;
+ cmp.eq p6,p7=HH,DH };;
+{ .mfb;
+(p6) setf.sig f8=AT
+(p7) fcvt.xuf.s1 f6=f6
+(p7) br.call.sptk b6=.L_udiv64_32_b6 };;
+
+{ .mfi; getf.sig r33=f8 // q
+ xmpy.lu f9=f8,f14 }
+{ .mfi; xmpy.hu f10=f8,f14
+ shrp H=H,L,32 };;
+
+{ .mmi; getf.sig r35=f9 // tl
+ getf.sig r31=f10 };; // th
+
+.L_divw_1st_iter:
+{ .mii; (p0) add r32=-1,r33
+ (p0) cmp.eq equ,cont=HH,r31 };;
+{ .mii; (p0) cmp.ltu p8,p0=r35,D
+ (p0) sub r34=r35,D
+ (equ) cmp.leu break,cont=r35,H };;
+{ .mib; (cont) cmp.leu cont,break=HH,r31
+ (p8) add r31=-1,r31
+(cont) br.wtop.spnt .L_divw_1st_iter };;
+///////////////////////////////////////////////////////////
+{ .mii; sub H=H,r35
+ shl r8=r33,32
+ shl L=L,32 };;
+///////////////////////////////////////////////////////////
+{ .mii; setf.sig f6=H
+ shr.u HH=H,32;;
+ cmp.eq p6,p7=HH,DH };;
+{ .mfb;
+(p6) setf.sig f8=AT
+(p7) fcvt.xuf.s1 f6=f6
+(p7) br.call.sptk b6=.L_udiv64_32_b6 };;
+
+{ .mfi; getf.sig r33=f8 // q
+ xmpy.lu f9=f8,f14 }
+{ .mfi; xmpy.hu f10=f8,f14
+ shrp H=H,L,32 };;
+
+{ .mmi; getf.sig r35=f9 // tl
+ getf.sig r31=f10 };; // th
+
+.L_divw_2nd_iter:
+{ .mii; (p0) add r32=-1,r33
+ (p0) cmp.eq equ,cont=HH,r31 };;
+{ .mii; (p0) cmp.ltu p8,p0=r35,D
+ (p0) sub r34=r35,D
+ (equ) cmp.leu break,cont=r35,H };;
+{ .mib; (cont) cmp.leu cont,break=HH,r31
+ (p8) add r31=-1,r31
+(cont) br.wtop.spnt .L_divw_2nd_iter };;
+///////////////////////////////////////////////////////////
+{ .mii; sub H=H,r35
+ or r8=r8,r33
+ mov ar.pfs=r2 };;
+{ .mii; shr.u r9=H,I // remainder if anybody wants it
+ mov pr=r10,0x1ffff }
+{ .mfb; br.ret.sptk.many b0 };;
+
+// Unsigned 64 by 32 (well, by 64 for the moment) bit integer division
+// procedure.
+//
+// inputs: f6 = (double)a, f7 = (double)b
+// output: f8 = (int)(a/b)
+// clobbered: f8,f9,f10,f11,pred
+pred=p15
+// One can argue that this snippet is copyrighted to Intel
+// Corporation, as it's essentially identical to one of those
+// found in "Divide, Square Root and Remainder" section at
+// http://www.intel.com/software/products/opensource/libraries/num.htm.
+// Yes, I admit that the referred code was used as template,
+// but after I realized that there hardly is any other instruction
+// sequence which would perform this operation. I mean I figure that
+// any independent attempt to implement high-performance division
+// will result in code virtually identical to the Intel code. It
+// should be noted though that below division kernel is 1 cycle
+// faster than Intel one (note commented splits:-), not to mention
+// original prologue (rather lack of one) and epilogue.
+.align 32
+.skip 16
+.L_udiv64_32_b6:
+ frcpa.s1 f8,pred=f6,f7;; // [0] y0 = 1 / b
+
+(pred) fnma.s1 f9=f7,f8,f1 // [5] e0 = 1 - b * y0
+(pred) fmpy.s1 f10=f6,f8;; // [5] q0 = a * y0
+(pred) fmpy.s1 f11=f9,f9 // [10] e1 = e0 * e0
+(pred) fma.s1 f10=f9,f10,f10;; // [10] q1 = q0 + e0 * q0
+(pred) fma.s1 f8=f9,f8,f8 //;; // [15] y1 = y0 + e0 * y0
+(pred) fma.s1 f9=f11,f10,f10;; // [15] q2 = q1 + e1 * q1
+(pred) fma.s1 f8=f11,f8,f8 //;; // [20] y2 = y1 + e1 * y1
+(pred) fnma.s1 f10=f7,f9,f6;; // [20] r2 = a - b * q2
+(pred) fma.s1 f8=f10,f8,f9;; // [25] q3 = q2 + r2 * y2
+
+ fcvt.fxu.trunc.s1 f8=f8 // [30] q = trunc(q3)
+ br.ret.sptk.many b6;;
+.endp bn_div_words#
+#endif