diff options
Diffstat (limited to 'ics-openvpn-stripped/main/openvpn/doc/management-notes.txt')
| -rw-r--r-- | ics-openvpn-stripped/main/openvpn/doc/management-notes.txt | 1039 |
1 files changed, 0 insertions, 1039 deletions
diff --git a/ics-openvpn-stripped/main/openvpn/doc/management-notes.txt b/ics-openvpn-stripped/main/openvpn/doc/management-notes.txt deleted file mode 100644 index ef39b855..00000000 --- a/ics-openvpn-stripped/main/openvpn/doc/management-notes.txt +++ /dev/null @@ -1,1039 +0,0 @@ -OpenVPN Management Interface Notes ----------------------------------- - -The OpenVPN Management interface allows OpenVPN to -be administratively controlled from an external program via -a TCP or unix domain socket. - -The interface has been specifically designed for developers -who would like to programmatically or remotely control -an OpenVPN daemon, and can be used when OpenVPN is running -as a client or server. - -The management interface is implemented using a client/server TCP -connection or unix domain socket where OpenVPN will listen on a -provided IP address and port for incoming management client connections. - -The management protocol is currently cleartext without an explicit -security layer. For this reason, it is recommended that the -management interface either listen on a unix domain socket, -localhost (127.0.0.1), or on the local VPN address. It's possible -to remotely connect to the management interface over the VPN itself, -though some capabilities will be limited in this mode, such as the -ability to provide private key passwords. - -The management interface is enabled in the OpenVPN -configuration file using the following directive: - ---management - -See the man page for documentation on this and related -directives. - -Once OpenVPN has started with the management layer enabled, -you can telnet to the management port (make sure to use -a telnet client which understands "raw" mode). - -Once connected to the management port, you can use -the "help" command to list all commands. - -COMMAND -- bytecount --------------------- - -The bytecount command is used to request real-time notification -of OpenVPN bandwidth usage. - -Command syntax: - - bytecount n (where n > 0) -- set up automatic notification of - bandwidth usage once every n seconds - bytecount 0 -- turn off bytecount notifications - -If OpenVPN is running as a client, the bytecount notification -will look like this: - - >BYTECOUNT:{BYTES_IN},{BYTES_OUT} - -BYTES_IN is the number of bytes that have been received from -the server and BYTES_OUT is the number of bytes that have been -sent to the server. - -If OpenVPN is running as a server, the bytecount notification -will look like this: - - >BYTECOUNT_CLI:{CID},{BYTES_IN},{BYTES_OUT} - -CID is the Client ID, BYTES_IN is the number of bytes that have -been received from the client and BYTES_OUT is the number of -bytes that have been sent to the client. - -Note that when the bytecount command is used on the server, every -connected client will report its bandwidth numbers once every n -seconds. - -When the client disconnects, the final bandwidth numbers will be -placed in the 'bytes_received' and 'bytes_sent' environmental variables -as included in the >CLIENT:DISCONNECT notification. - -COMMAND -- echo ---------------- - -The echo capability is used to allow GUI-specific -parameters to be either embedded in the OpenVPN config file -or pushed to an OpenVPN client from a server. - -Command examples: - - echo on -- turn on real-time notification of echo messages - echo all -- print the current echo history list - echo off -- turn off real-time notification of echo messages - echo on all -- atomically enable real-time notification, - plus show any messages in history buffer - -For example, suppose you are developing a OpenVPN GUI and -you want to give the OpenVPN server the ability to ask -the GUI to forget any saved passwords. - -In the OpenVPN server config file, add: - - push "echo forget-passwords" - -When the OpenVPN client receives its pulled list of directives -from the server, the "echo forget-passwords" directive will -be in the list, and it will cause the management interface -to save the "forget-passwords" string in its list of echo -parameters. - -The management client can use "echo all" to output the full -list of echoed parameters, "echo on" to turn on real-time -notification of echoed parameters via the ">ECHO:" prefix, -or "echo off" to turn off real-time notification. - -When the GUI connects to the OpenVPN management socket, it -can issue an "echo all" command, which would produce output -like this: - - 1101519562,forget-passwords - END - -Essentially the echo command allowed us to pass parameters from -the OpenVPN server to the OpenVPN client, and then to the -management client (such as a GUI). The large integer is the -unix date/time when the echo parameter was received. - -If the management client had issued the command "echo on", -it would have enabled real-time notifications of echo -parameters. In this case, our "forget-passwords" message -would be output like this: - - >ECHO:1101519562,forget-passwords - -Like the log command, the echo command can atomically show -history while simultaneously activating real-time updates: - - echo on all - -The size of the echo buffer is currently hardcoded to 100 -messages. - -COMMAND -- exit, quit ---------------------- - -Close the managment session, and resume listening on the -management port for connections from other clients. Currently, -the OpenVPN daemon can at most support a single management client -any one time. - -COMMAND -- help ---------------- - -Print a summary of commands. - -COMMAND -- hold ---------------- - -The hold command can be used to manipulate the hold flag, -or release OpenVPN from a hold state. - -If the hold flag is set on initial startup or -restart, OpenVPN will hibernate prior to initializing -the tunnel until the management interface receives -a "hold release" command. - -The --management-hold directive of OpenVPN can be used -to start OpenVPN with the hold flag set. - -The hold flag setting is persistent and will not -be reset by restarts. - -OpenVPN will indicate that it is in a hold state by -sending a real-time notification to the management -client: - - >HOLD:Waiting for hold release - -Command examples: - - hold -- show current hold flag, 0=off, 1=on. - hold on -- turn on hold flag so that future restarts - will hold. - hold off -- turn off hold flag so that future restarts will - not hold. - hold release -- leave hold state and start OpenVPN, but - do not alter the current hold flag setting. - -COMMAND -- kill ---------------- - -In server mode, kill a particlar client instance. - -Command examples: - - kill Test-Client -- kill the client instance having a - common name of "Test-Client". - kill 1.2.3.4:4000 -- kill the client instance having a - source address and port of 1.2.3.4:4000 - -Use the "status" command to see which clients are connected. - -COMMAND -- log --------------- - -Show the OpenVPN log file. Only the most recent n lines -of the log file are cached by the management interface, where -n is controlled by the OpenVPN --management-log-cache directive. - -Command examples: - - log on -- Enable real-time output of log messages. - log all -- Show currently cached log file history. - log on all -- Atomically show all currently cached log file - history then enable real-time notification of - new log file messages. - log off -- Turn off real-time notification of log messages. - log 20 -- Show the most recent 20 lines of log file history. - -Real-time notification format: - -Real-time log messages begin with the ">LOG:" prefix followed -by the following comma-separated fields: - - (a) unix integer date/time, - (b) zero or more message flags in a single string: - I -- informational - F -- fatal error - N -- non-fatal error - W -- warning - D -- debug, and - (c) message text. - -COMMAND -- mute ---------------- - -Change the OpenVPN --mute parameter. The mute parameter is -used to silence repeating messages of the same message -category. - -Command examples: - - mute 40 -- change the mute parameter to 40 - mute -- show the current mute setting - -COMMAND -- net --------------- - -(Windows Only) Produce output equivalent to the OpenVPN ---show-net directive. The output includes OpenVPN's view -of the system network adapter list and routing table based -on information returned by the Windows IP helper API. - -COMMAND -- pid --------------- - -Shows the process ID of the current OpenVPN process. - -COMMAND -- password and username --------------------------------- - - The password command is used to pass passwords to OpenVPN. - - If OpenVPN is run with the --management-query-passwords - directive, it will query the management interface for RSA - private key passwords and the --auth-user-pass - username/password. - - When OpenVPN needs a password from the management interface, - it will produce a real-time ">PASSWORD:" message. - - Example 1: - - >PASSWORD:Need 'Private Key' password - - OpenVPN is indicating that it needs a password of type - "Private Key". - - The management client should respond to this query as follows: - - password "Private Key" foo - - Example 2: - - >PASSWORD:Need 'Auth' username/password - - OpenVPN needs a --auth-user-pass password. The management - client should respond: - - username "Auth" foo - password "Auth" bar - - The username/password itself can be in quotes, and special - characters such as double quote or backslash must be escaped, - for example, - - password "Private Key" "foo\"bar" - - The escaping rules are the same as for the config file. - See the "Command Parsing" section below for more info. - - The PASSWORD real-time message type can also be used to - indicate password or other types of authentication failure: - - Example 3: The private key password is incorrect and OpenVPN - is exiting: - - >PASSWORD:Verification Failed: 'Private Key' - - Example 4: The --auth-user-pass username/password failed, - and OpenVPN is exiting: - - >PASSWORD:Verification Failed: 'Auth' - - Example 5: The --auth-user-pass username/password failed, - and the server provided a custom client-reason-text string - using the client-deny server-side management interface command. - - >PASSWORD:Verification Failed: 'custom server-generated string' - -COMMAND -- forget-passwords ---------------------------- - -The forget-passwords command will cause the daemon to forget passwords -entered during the session. - -Command example: - - forget-passwords -- forget passwords entered so far. - -COMMAND -- signal ------------------ - -The signal command will send a signal to the OpenVPN daemon. -The signal can be one of SIGHUP, SIGTERM, SIGUSR1, or SIGUSR2. - -Command example: - - signal SIGUSR1 -- send a SIGUSR1 signal to daemon - -COMMAND -- state ----------------- - -Show the current OpenVPN state, show state history, or -enable real-time notification of state changes. - -These are the OpenVPN states: - -CONNECTING -- OpenVPN's initial state. -WAIT -- (Client only) Waiting for initial response - from server. -AUTH -- (Client only) Authenticating with server. -GET_CONFIG -- (Client only) Downloading configuration options - from server. -ASSIGN_IP -- Assigning IP address to virtual network - interface. -ADD_ROUTES -- Adding routes to system. -CONNECTED -- Initialization Sequence Completed. -RECONNECTING -- A restart has occurred. -EXITING -- A graceful exit is in progress. - -Command examples: - - state -- Print current OpenVPN state. - state on -- Enable real-time notification of state changes. - state off -- Disable real-time notification of state changes. - state all -- Print current state history. - state 3 -- Print the 3 most recent state transitions. - state on all -- Atomically show state history while at the - same time enable real-time state notification - of future state transitions. - -The output format consists of 4 comma-separated parameters: - (a) the integer unix date/time, - (b) the state name, - (c) optional descriptive string (used mostly on RECONNECTING - and EXITING to show the reason for the disconnect), - (d) optional TUN/TAP local IP address (shown for ASSIGN_IP - and CONNECTED), and - (e) optional address of remote server (OpenVPN 2.1 or higher). - -Real-time state notifications will have a ">STATE:" prefix -prepended to them. - -COMMAND -- status ------------------ - -Show current daemon status information, in the same format as -that produced by the OpenVPN --status directive. - -Command examples: - -status -- Show status information using the default status - format version. - -status 3 -- Show status information using the format of - --status-version 3. - -COMMAND -- username -------------------- - -See the "password" section above. - -COMMAND -- verb ---------------- - -Change the OpenVPN --verb parameter. The verb parameter -controls the output verbosity, and may range from 0 (no output) -to 15 (maximum output). See the OpenVPN man page for additional -info on verbosity levels. - -Command examples: - - verb 4 -- change the verb parameter to 4 - mute -- show the current verb setting - -COMMAND -- version ------------------- - -Show the current OpenVPN and Management Interface versions. - - -COMMAND -- auth-retry ---------------------- - -Set the --auth-retry setting to control how OpenVPN responds to -username/password authentication errors. See the manual page -for more info. - -Command examples: - - auth-retry interact -- Don't exit when bad username/passwords are entered. - Query for new input and retry. - -COMMAND -- needok (OpenVPN 2.1 or higher) ------------------------------------------- - -Confirm a ">NEED-OK" real-time notification, normally used by -OpenVPN to block while waiting for a specific user action. - -Example: - - OpenVPN needs the user to insert a cryptographic token, - so it sends a real-time notification: - - >NEED-OK:Need 'token-insertion-request' confirmation MSG:Please insert your cryptographic token - - The management client, if it is a GUI, can flash a dialog - box containing the text after the "MSG:" marker to the user. - When the user acknowledges the dialog box, - the management client can issue this command: - - needok token-insertion-request ok - or - needok token-insertion-request cancel - -COMMAND -- needstr (OpenVPN 2.1 or higher) -------------------------------------------- - -Confirm a ">NEED-STR" real-time notification, normally used by -OpenVPN to block while waiting for a specific user input. - -Example: - - OpenVPN needs the user to specify some input, so it sends a - real-time notification: - - >NEED-STR:Need 'name' input MSG:Please specify your name - - The management client, if it is a GUI, can flash a dialog - box containing the text after the "MSG:" marker to the user. - When the user acknowledges the dialog box, - the management client can issue this command: - - needstr name "John" - -COMMAND -- pkcs11-id-count (OpenVPN 2.1 or higher) ---------------------------------------------------- - -Retrieve available number of certificates. - -Example: - - pkcs11-id-count - >PKCS11ID-COUNT:5 - -COMMAND -- pkcs11-id-get (OpenVPN 2.1 or higher) -------------------------------------------------- - -Retrieve certificate by index, the ID string should be provided -as PKCS#11 identity, the blob is BASE64 encoded certificate. - -Example: - - pkcs11-id-get 1 - PKCS11ID-ENTRY:'1', ID:'<snip>', BLOB:'<snip>' - -COMMAND -- client-auth (OpenVPN 2.1 or higher) ------------------------------------------------ - -Authorize a ">CLIENT:CONNECT" or ">CLIENT:REAUTH" request and specify -"client-connect" configuration directives in a subsequent text block. - -The OpenVPN server should have been started with the ---management-client-auth directive so that it will ask the management -interface to approve client connections. - - - client-auth {CID} {KID} - line_1 - line_2 - ... - line_n - END - -CID,KID -- client ID and Key ID. See documentation for ">CLIENT:" -notification for more info. - -line_1 to line_n -- client-connect configuration text block, as would be -returned by a --client-connect script. The text block may be null, with -"END" immediately following the "client-auth" line (using a null text -block is equivalent to using the client-auth-nt command). - -A client-connect configuration text block contains OpenVPN directives -that will be applied to the client instance object representing a newly -connected client. - -COMMAND -- client-auth-nt (OpenVPN 2.1 or higher) --------------------------------------------------- - -Authorize a ">CLIENT:CONNECT" or ">CLIENT:REAUTH" request without specifying -client-connect configuration text. - -The OpenVPN server should have been started with the ---management-client-auth directive so that it will ask the management -interface to approve client connections. - - client-auth-nt {CID} {KID} - -CID,KID -- client ID and Key ID. See documentation for ">CLIENT:" -notification for more info. - -COMMAND -- client-deny (OpenVPN 2.1 or higher) ------------------------------------------------ - -Deny a ">CLIENT:CONNECT" or ">CLIENT:REAUTH" request. - - client-deny {CID} {KID} "reason-text" ["client-reason-text"] - -CID,KID -- client ID and Key ID. See documentation for ">CLIENT:" -notification for more info. - -reason-text: a human-readable message explaining why the authentication -request was denied. This message will be output to the OpenVPN log -file or syslog. - -client-reason-text: a message that will be sent to the client as -part of the AUTH_FAILED message. - -Note that client-deny denies a specific Key ID (pertaining to a -TLS renegotiation). A client-deny command issued in response to -an initial TLS key negotiation (notified by ">CLIENT:CONNECT") will -terminate the client session after returning "AUTH-FAILED" to the client. -On the other hand, a client-deny command issued in response to -a TLS renegotiation (">CLIENT:REAUTH") will invalidate the renegotiated -key, however the TLS session associated with the currently active -key will continue to live for up to --tran-window seconds before -expiration. - -To immediately kill a client session, use "client-kill". - -COMMAND -- client-kill (OpenVPN 2.1 or higher) ------------------------------------------------ - -Immediately kill a client instance by CID. - - client-kill {CID} - -CID -- client ID. See documentation for ">CLIENT:" notification for more -info. - -COMMAND -- client-pf (OpenVPN 2.1 or higher) ---------------------------------------------- - -Push a packet filter file to a specific client. - -The OpenVPN server should have been started with the ---management-client-pf directive so that it will require that -VPN tunnel packets sent or received by client instances must -conform to that client's packet filter configuration. - - client-pf {CID} - line_1 - line_2 - ... - line_n - END - -CID -- client ID. See documentation for ">CLIENT:" notification for -more info. - -line_1 to line_n -- the packet filter configuration file for this -client. - -Packet filter file grammar: - - [CLIENTS DROP|ACCEPT] - {+|-}common_name1 - {+|-}common_name2 - . . . - [SUBNETS DROP|ACCEPT] - {+|-}subnet1 - {+|-}subnet2 - . . . - [END] - - Subnet: IP-ADDRESS | IP-ADDRESS/NUM_NETWORK_BITS | "unknown" - - CLIENTS refers to the set of clients (by their common-name) which - this instance is allowed ('+') to connect to, or is excluded ('-') - from connecting to. Note that in the case of client-to-client - connections, such communication must be allowed by the packet filter - configuration files of both clients AND the --client-to-client - directive must have been specified in the OpenVPN server config. - - SUBNETS refers to IP addresses or IP address subnets which this - client instance may connect to ('+') or is excluded ('-') from - connecting to, and applies to IPv4 and ARP packets. The special - "unknown" tag refers to packets of unknown type, i.e. a packet that - is not IPv4 or ARP. - - DROP or ACCEPT defines default policy when there is no explicit match - for a common-name or subnet. The [END] tag must exist. - - Notes: - - * The SUBNETS section currently only supports IPv4 addresses and - subnets. - - * A given client or subnet rule applies to both incoming and - outgoing packets. - - * The CLIENTS list is order-invariant. Because the list is stored - as a hash-table, the order of the list does not affect its function. - - * The SUBNETS table is scanned sequentially, and the first item to - match is chosen. Therefore the SUBNETS table is NOT order-invariant. - - * No client-to-client communication is allowed unless the - --client-to-client configuration directive is enabled AND - the CLIENTS list of BOTH clients allows the communication. - -Example packet filter spec, as transmitted to the management interface: - - client-pf 42 - [CLIENTS ACCEPT] - -accounting - -enigma - [SUBNETS DROP] - -10.46.79.9 - +10.0.0.0/8 - [END] - END - -The above example sets the packet filter policy for the client -identified by CID=42. This client may connect to all other clients -except those having a common name of "accounting" or "enigma". -The client may only interact with external IP addresses in the -10.0.0.0/8 subnet, however access to 10.46.79.9 is specifically -excluded. - -Another example packet filter spec, as transmitted to the -management interface: - - client-pf 99 - [CLIENTS DENY] - +public - [SUBNETS ACCEPT] - +10.10.0.1 - -10.0.0.0/8 - -unknown - [END] - END - -The above example sets the packet filter policy for the client -identified by CID=99. This client may not connect to any other -clients except those having a common name of "public". It may -interact with any external IP address except those in the -10.0.0.0/8 netblock. However interaction with one address in -the 10.0.0.0/8 netblock is allowed: 10.10.0.1. Also, the client -may not interact with external IP addresses using an "unknown" -protocol (i.e. one that is not IPv4 or ARP). - -COMMAND -- remote (OpenVPN AS 2.1.5/OpenVPN 2.3 or higher) --------------------------------------------- - -Provide remote host/port in response to a >REMOTE notification -(client only). Requires that the --management-query-remote -directive is used. - - remote ACTION [HOST PORT] - -The "remote" command should only be given in response to a >REMOTE -notification. For example, the following >REMOTE notification -indicates that the client config file would ordinarily connect -to vpn.example.com port 1194 (UDP): - - >REMOTE:vpn.example.com,1194,udp - -Now, suppose we want to override the host and port, connecting -instead to vpn.otherexample.com port 1234. After receiving -the above notification, use this command: - - remote MOD vpn.otherexample.com 1234 - -To accept the same host and port as the client would ordinarily -have connected to, use this command: - - remote ACCEPT - -To skip the current connection entry and advance to the next one, -use this command: - - remote SKIP - -COMMAND -- proxy (OpenVPN 2.3 or higher) --------------------------------------------- - -Provide proxy server host/port and flags in response to a >PROXY -notification (client only). Requires that the --management-query-proxy -directive is used. - - proxy TYPE HOST PORT ["nct"] - -The "proxy" command must only be given in response to a >PROXY -notification. Use the "nct" flag if you only want to allow -non-cleartext auth with the proxy server. The following >PROXY -notification indicates that the client config file would ordinarily -connect to the first --remote configured, vpn.example.com using TCP: - - >PROXY:1,TCP,vpn.example.com - -Now, suppose we want to connect to the remote host using the proxy server -proxy.intranet port 8080 with secure authentication only, if required. -After receiving the above notification, use this command: - - proxy HTTP proxy.intranet 8080 nct - -You can also use the SOCKS keyword to pass a SOCKS server address, like: - - proxy SOCKS fe00::1 1080 - -To accept connecting to the host and port directly, use this command: - - proxy NONE - -COMMAND -- rsa-sig (OpenVPN 2.3 or higher) ------------------------------------------- -Provides support for external storage of the private key. Requires the ---management-external-key option. This option can be used instead of "key" -in client mode, and allows the client to run without the need to load the -actual private key. When the SSL protocol needs to perform an RSA sign -operation, the data to be signed will be sent to the management interface -via a notification as follows: - ->RSA_SIGN:[BASE64_DATA] - -The management interface client should then sign BASE64_DATA -using the private key and return the SSL signature as follows: - -rsa-sig -[BASE64_SIG_LINE] -. -. -. -END - -Base64 encoded output of RSA_sign(NID_md5_sha1,... will provide a -correct signature. - -This capability is intended to allow the use of arbitrary cryptographic -service providers with OpenVPN via the management interface. - - -OUTPUT FORMAT -------------- - -(1) Command success/failure indicated by "SUCCESS: [text]" or - "ERROR: [text]". - -(2) For commands which print multiple lines of output, - the last line will be "END". - -(3) Real-time messages will be in the form ">[source]:[text]", - where source is "CLIENT", "ECHO", "FATAL", "HOLD", "INFO", "LOG", - "NEED-OK", "PASSWORD", or "STATE". - -REAL-TIME MESSAGE FORMAT ------------------------- - -The OpenVPN management interface produces two kinds of -output: (a) output from a command, or (b) asynchronous, -real-time output which can be generated at any time. - -Real-time messages start with a '>' character in the first -column and are immediately followed by a type keyword -indicating the type of real-time message. The following -types are currently defined: - -BYTECOUNT -- Real-time bandwidth usage notification, as enabled - by "bytecount" command when OpenVPN is running as - a client. - -BYTECOUNT_CLI -- Real-time bandwidth usage notification per-client, - as enabled by "bytecount" command when OpenVPN is - running as a server. - -CLIENT -- Notification of client connections and disconnections - on an OpenVPN server. Enabled when OpenVPN is started - with the --management-client-auth option. CLIENT - notifications may be multi-line. See "The CLIENT - notification" section below for detailed info. - -ECHO -- Echo messages as controlled by the "echo" command. - -FATAL -- A fatal error which is output to the log file just - prior to OpenVPN exiting. - -HOLD -- Used to indicate that OpenVPN is in a holding state - and will not start until it receives a - "hold release" command. - -INFO -- Informational messages such as the welcome message. - -LOG -- Log message output as controlled by the "log" command. - -NEED-OK -- OpenVPN needs the end user to do something, such as - insert a cryptographic token. The "needok" command can - be used to tell OpenVPN to continue. - -NEED-STR -- OpenVPN needs information from end, such as - a certificate to use. The "needstr" command can - be used to tell OpenVPN to continue. - -PASSWORD -- Used to tell the management client that OpenVPN - needs a password, also to indicate password - verification failure. - -STATE -- Shows the current OpenVPN state, as controlled - by the "state" command. - -The CLIENT notification ------------------------ - -The ">CLIENT:" notification is enabled by the --management-client-auth -OpenVPN configuration directive that gives the management interface client -the responsibility to authenticate OpenVPN clients after their client -certificate has been verified. CLIENT notifications may be multi-line, and -the sequentiality of a given CLIENT notification, its associated environmental -variables, and the terminating ">CLIENT:ENV,END" line are guaranteed to be -atomic. - -CLIENT notification types: - -(1) Notify new client connection ("CONNECT") or existing client TLS session - renegotiation ("REAUTH"). Information about the client is provided - by a list of environmental variables which are documented in the OpenVPN - man page. The environmental variables passed are equivalent to those - that would be passed to an --auth-user-pass-verify script. - - >CLIENT:CONNECT|REAUTH,{CID},{KID} - >CLIENT:ENV,name1=val1 - >CLIENT:ENV,name2=val2 - >CLIENT:ENV,... - >CLIENT:ENV,END - -(2) Notify successful client authentication and session initiation. - Called after CONNECT. - - >CLIENT:ESTABLISHED,{CID} - >CLIENT:ENV,name1=val1 - >CLIENT:ENV,name2=val2 - >CLIENT:ENV,... - >CLIENT:ENV,END - -(3) Notify existing client disconnection. The environmental variables passed - are equivalent to those that would be passed to a --client-disconnect - script. - - >CLIENT:DISCONNECT,{CID} - >CLIENT:ENV,name1=val1 - >CLIENT:ENV,name2=val2 - >CLIENT:ENV,... - >CLIENT:ENV,END - -(4) Notify that a particular virtual address or subnet - is now associated with a specific client. - - >CLIENT:ADDRESS,{CID},{ADDR},{PRI} - -Variables: - -CID -- Client ID, numerical ID for each connecting client, sequence = 0,1,2,... -KID -- Key ID, numerical ID for the key associated with a given client TLS session, - sequence = 0,1,2,... -PRI -- Primary (1) or Secondary (0) VPN address/subnet. All clients have at least - one primary IP address. Secondary address/subnets are associated with - client-specific "iroute" directives. -ADDR -- IPv4 address/subnet in the form 1.2.3.4 or 1.2.3.0/255.255.255.0 - -In the unlikely scenario of an extremely long-running OpenVPN server, -CID and KID should be assumed to recycle to 0 after (2^32)-1, however this -recycling behavior is guaranteed to be collision-free. - -Command Parsing ---------------- - -The management interface uses the same command line lexical analyzer -as is used by the OpenVPN config file parser. - -Whitespace is a parameter separator. - -Double quotation or single quotation characters ("", '') can be used -to enclose parameters containing whitespace. - -Backslash-based shell escaping is performed, using the following -mappings, when not in single quotations: - -\\ Maps to a single backslash character (\). -\" Pass a literal doublequote character ("), don't - interpret it as enclosing a parameter. -\[SPACE] Pass a literal space or tab character, don't - interpret it as a parameter delimiter. - -Challenge/Response Protocol ---------------------------- - -The OpenVPN Challenge/Response Protocol allows an OpenVPN server to -generate challenge questions that are shown to the user, and to see -the user's responses to those challenges. Based on the responses, the -server can allow or deny access. - -In this way, the OpenVPN Challenge/Response Protocol can be used -to implement multi-factor authentication. Two different -variations on the challenge/response protocol are supported: the -"Dynamic" and "Static" protocols. - -The basic idea of Challenge/Response is that the user must enter an -additional piece of information, in addition to the username and -password, to successfully authenticate. Normally, this information -is used to prove that the user posesses a certain key-like device -such as cryptographic token or a particular mobile phone. - -Dynamic protocol: - -The OpenVPN dynamic challenge/response protocol works by returning -a specially formatted error message after initial successful -authentication. This error message contains the challenge question, -and is formatted as such: - - CRV1:<flags>:<state_id>:<username_base64>:<challenge_text> - -flags: a series of optional, comma-separated flags: - E : echo the response when the user types it - R : a response is required - -state_id: an opaque string that should be returned to the server - along with the response. - -username_base64 : the username formatted as base64 - -challenge_text : the challenge text to be shown to the user - -Example challenge: - - CRV1:R,E:Om01u7Fh4LrGBS7uh0SWmzwabUiGiW6l:Y3Ix:Please enter token PIN - -After showing the challenge_text and getting a response from the user -(if R flag is specified), the client should submit the following -auth creds back to the OpenVPN server: - -Username: [username decoded from username_base64] -Password: CRV1::<state_id>::<response_text> - -Where state_id is taken from the challenge request and response_text -is what the user entered in response to the challenge_text. -If the R flag is not present, response_text may be the empty -string. - -Example response (suppose the user enters "8675309" for the token PIN): - - Username: cr1 ("Y3Ix" base64 decoded) - Password: CRV1::Om01u7Fh4LrGBS7uh0SWmzwabUiGiW6l::8675309 - -Static protocol: - -The static protocol differs from the dynamic protocol in that the -challenge question and response field is given to the user in the -initial username/password dialog, and the username, password, and -response are delivered back to the server in a single transaction. - -The "static-challenge" directive is used to give the challenge text -to OpenVPN and indicate whether or not the response should be echoed. - -When the "static-challenge" directive is used, the management -interface will respond as such when credentials are needed: - - >PASSWORD:Need 'Auth' username/password SC:<ECHO>,<TEXT> - - ECHO: "1" if response should be echoed, "0" to not echo - TEXT: challenge text that should be shown to the user to - facilitate their response - -For example: - - >PASSWORD:Need 'Auth' username/password SC:1,Please enter token PIN - -The above notification indicates that OpenVPN needs a --auth-user-pass -password plus a response to a static challenge ("Please enter token PIN"). -The "1" after the "SC:" indicates that the response should be echoed. - -The management interface client in this case should add the static -challenge text to the auth dialog followed by a field for the user to -enter a response. Then the client should pack the password and response -together into an encoded password: - - username "Auth" foo - password "Auth" "SCRV1:<BASE64_PASSWORD>:<BASE64_RESPONSE>" - -For example, if the user entered "bar" as the password and 8675309 -as the PIN, the following management interface commands should be -issued: - - username "Auth" foo - password "Auth" "SCRV1:Zm9v:ODY3NTMwOQ==" - -Client-side support for challenge/response protocol: - -Currently, the Access Server client and standalone OpenVPN -client support both static and dynamic challenge/response -protocols. However, any OpenVPN client UI that drives OpenVPN -via the management interface needs to add explicit support -for the challenge/response protocol. |