diff options
Diffstat (limited to 'bitmask_android/openvpn/sample/sample-windows/sample.ovpn')
-rwxr-xr-x | bitmask_android/openvpn/sample/sample-windows/sample.ovpn | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/bitmask_android/openvpn/sample/sample-windows/sample.ovpn b/bitmask_android/openvpn/sample/sample-windows/sample.ovpn new file mode 100755 index 00000000..5accd573 --- /dev/null +++ b/bitmask_android/openvpn/sample/sample-windows/sample.ovpn @@ -0,0 +1,103 @@ +# Edit this file, and save to a .ovpn extension +# so that OpenVPN will activate it when run +# as a service. + +# Change 'myremote' to be your remote host, +# or comment out to enter a listening +# server mode. +remote myremote + +# Uncomment this line to use a different +# port number than the default of 1194. +; port 1194 + +# Choose one of three protocols supported by +# OpenVPN. If left commented out, defaults +# to udp. +; proto [tcp-server | tcp-client | udp] + +# You must specify one of two possible network +# protocols, 'dev tap' or 'dev tun' to be used +# on both sides of the connection. 'tap' creates +# a VPN using the ethernet protocol while 'tun' +# uses the IP protocol. You must use 'tap' +# if you are ethernet bridging or want to route +# broadcasts. 'tun' is somewhat more efficient +# but requires configuration of client software +# to not depend on broadcasts. Some platforms +# such as Solaris, OpenBSD, and Mac OS X only +# support 'tun' interfaces, so if you are +# connecting to such a platform, you must also +# use a 'tun' interface on the Windows side. + +# Enable 'dev tap' or 'dev tun' but not both! +dev tap + +# This is a 'dev tap' ifconfig that creates +# a virtual ethernet subnet. +# 10.3.0.1 is the local VPN IP address +# and 255.255.255.0 is the VPN subnet. +# Only define this option for 'dev tap'. +ifconfig 10.3.0.1 255.255.255.0 + +# This is a 'dev tun' ifconfig that creates +# a point-to-point IP link. +# 10.3.0.1 is the local VPN IP address and +# 10.3.0.2 is the remote VPN IP address. +# Only define this option for 'dev tun'. +# Make sure to include the "tun-mtu" option +# on the remote machine, but swap the order +# of the ifconfig addresses. +;tun-mtu 1500 +;ifconfig 10.3.0.1 10.3.0.2 + +# If you have fragmentation issues or misconfigured +# routers in the path which block Path MTU discovery, +# lower the TCP MSS and internally fragment non-TCP +# protocols. +;fragment 1300 +;mssfix + +# If you have set up more than one TAP-Win32 adapter +# on your system, you must refer to it by name. +;dev-node my-tap + +# You can generate a static OpenVPN key +# by selecting the Generate Key option +# in the start menu. +# +# You can also generate key.txt manually +# with the following command: +# openvpn --genkey --secret key.txt +# +# key must match on both ends of the connection, +# so you should generate it on one machine and +# copy it to the other over a secure medium. +# Place key.txt in the same directory as this +# config file. +secret key.txt + +# Uncomment this section for a more reliable +# detection when a system loses its connection. +# For example, dial-ups or laptops that travel +# to other locations. +# +# If this section is enabled and "myremote" +# above is a dynamic DNS name (i.e. dyndns.org), +# OpenVPN will dynamically "follow" the IP +# address of "myremote" if it changes. +; ping-restart 60 +; ping-timer-rem +; persist-tun +; persist-key +; resolv-retry 86400 + +# keep-alive ping +ping 10 + +# enable LZO compression +comp-lzo + +# moderate verbosity +verb 4 +mute 10 |