summaryrefslogtreecommitdiff
path: root/bitmask_android/openvpn/sample/sample-config-files/server.conf
diff options
context:
space:
mode:
Diffstat (limited to 'bitmask_android/openvpn/sample/sample-config-files/server.conf')
-rw-r--r--bitmask_android/openvpn/sample/sample-config-files/server.conf299
1 files changed, 299 insertions, 0 deletions
diff --git a/bitmask_android/openvpn/sample/sample-config-files/server.conf b/bitmask_android/openvpn/sample/sample-config-files/server.conf
new file mode 100644
index 00000000..f483b6bb
--- /dev/null
+++ b/bitmask_android/openvpn/sample/sample-config-files/server.conf
@@ -0,0 +1,299 @@
+#################################################
+# Sample OpenVPN 2.0 config file for #
+# multi-client server. #
+# #
+# This file is for the server side #
+# of a many-clients <-> one-server #
+# OpenVPN configuration. #
+# #
+# OpenVPN also supports #
+# single-machine <-> single-machine #
+# configurations (See the Examples page #
+# on the web site for more info). #
+# #
+# This config should work on Windows #
+# or Linux/BSD systems. Remember on #
+# Windows to quote pathnames and use #
+# double backslashes, e.g.: #
+# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
+# #
+# Comments are preceded with '#' or ';' #
+#################################################
+
+# Which local IP address should OpenVPN
+# listen on? (optional)
+;local a.b.c.d
+
+# Which TCP/UDP port should OpenVPN listen on?
+# If you want to run multiple OpenVPN instances
+# on the same machine, use a different port
+# number for each one. You will need to
+# open up this port on your firewall.
+port 1194
+
+# TCP or UDP server?
+;proto tcp
+proto udp
+
+# "dev tun" will create a routed IP tunnel,
+# "dev tap" will create an ethernet tunnel.
+# Use "dev tap0" if you are ethernet bridging
+# and have precreated a tap0 virtual interface
+# and bridged it with your ethernet interface.
+# If you want to control access policies
+# over the VPN, you must create firewall
+# rules for the the TUN/TAP interface.
+# On non-Windows systems, you can give
+# an explicit unit number, such as tun0.
+# On Windows, use "dev-node" for this.
+# On most systems, the VPN will not function
+# unless you partially or fully disable
+# the firewall for the TUN/TAP interface.
+;dev tap
+dev tun
+
+# Windows needs the TAP-Win32 adapter name
+# from the Network Connections panel if you
+# have more than one. On XP SP2 or higher,
+# you may need to selectively disable the
+# Windows firewall for the TAP adapter.
+# Non-Windows systems usually don't need this.
+;dev-node MyTap
+
+# SSL/TLS root certificate (ca), certificate
+# (cert), and private key (key). Each client
+# and the server must have their own cert and
+# key file. The server and all clients will
+# use the same ca file.
+#
+# See the "easy-rsa" directory for a series
+# of scripts for generating RSA certificates
+# and private keys. Remember to use
+# a unique Common Name for the server
+# and each of the client certificates.
+#
+# Any X509 key management system can be used.
+# OpenVPN can also use a PKCS #12 formatted key file
+# (see "pkcs12" directive in man page).
+ca ca.crt
+cert server.crt
+key server.key # This file should be kept secret
+
+# Diffie hellman parameters.
+# Generate your own with:
+# openssl dhparam -out dh1024.pem 1024
+# Substitute 2048 for 1024 if you are using
+# 2048 bit keys.
+dh dh1024.pem
+
+# Configure server mode and supply a VPN subnet
+# for OpenVPN to draw client addresses from.
+# The server will take 10.8.0.1 for itself,
+# the rest will be made available to clients.
+# Each client will be able to reach the server
+# on 10.8.0.1. Comment this line out if you are
+# ethernet bridging. See the man page for more info.
+server 10.8.0.0 255.255.255.0
+
+# Maintain a record of client <-> virtual IP address
+# associations in this file. If OpenVPN goes down or
+# is restarted, reconnecting clients can be assigned
+# the same virtual IP address from the pool that was
+# previously assigned.
+ifconfig-pool-persist ipp.txt
+
+# Configure server mode for ethernet bridging.
+# You must first use your OS's bridging capability
+# to bridge the TAP interface with the ethernet
+# NIC interface. Then you must manually set the
+# IP/netmask on the bridge interface, here we
+# assume 10.8.0.4/255.255.255.0. Finally we
+# must set aside an IP range in this subnet
+# (start=10.8.0.50 end=10.8.0.100) to allocate
+# to connecting clients. Leave this line commented
+# out unless you are ethernet bridging.
+;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
+
+# Configure server mode for ethernet bridging
+# using a DHCP-proxy, where clients talk
+# to the OpenVPN server-side DHCP server
+# to receive their IP address allocation
+# and DNS server addresses. You must first use
+# your OS's bridging capability to bridge the TAP
+# interface with the ethernet NIC interface.
+# Note: this mode only works on clients (such as
+# Windows), where the client-side TAP adapter is
+# bound to a DHCP client.
+;server-bridge
+
+# Push routes to the client to allow it
+# to reach other private subnets behind
+# the server. Remember that these
+# private subnets will also need
+# to know to route the OpenVPN client
+# address pool (10.8.0.0/255.255.255.0)
+# back to the OpenVPN server.
+;push "route 192.168.10.0 255.255.255.0"
+;push "route 192.168.20.0 255.255.255.0"
+
+# To assign specific IP addresses to specific
+# clients or if a connecting client has a private
+# subnet behind it that should also have VPN access,
+# use the subdirectory "ccd" for client-specific
+# configuration files (see man page for more info).
+
+# EXAMPLE: Suppose the client
+# having the certificate common name "Thelonious"
+# also has a small subnet behind his connecting
+# machine, such as 192.168.40.128/255.255.255.248.
+# First, uncomment out these lines:
+;client-config-dir ccd
+;route 192.168.40.128 255.255.255.248
+# Then create a file ccd/Thelonious with this line:
+# iroute 192.168.40.128 255.255.255.248
+# This will allow Thelonious' private subnet to
+# access the VPN. This example will only work
+# if you are routing, not bridging, i.e. you are
+# using "dev tun" and "server" directives.
+
+# EXAMPLE: Suppose you want to give
+# Thelonious a fixed VPN IP address of 10.9.0.1.
+# First uncomment out these lines:
+;client-config-dir ccd
+;route 10.9.0.0 255.255.255.252
+# Then add this line to ccd/Thelonious:
+# ifconfig-push 10.9.0.1 10.9.0.2
+
+# Suppose that you want to enable different
+# firewall access policies for different groups
+# of clients. There are two methods:
+# (1) Run multiple OpenVPN daemons, one for each
+# group, and firewall the TUN/TAP interface
+# for each group/daemon appropriately.
+# (2) (Advanced) Create a script to dynamically
+# modify the firewall in response to access
+# from different clients. See man
+# page for more info on learn-address script.
+;learn-address ./script
+
+# If enabled, this directive will configure
+# all clients to redirect their default
+# network gateway through the VPN, causing
+# all IP traffic such as web browsing and
+# and DNS lookups to go through the VPN
+# (The OpenVPN server machine may need to NAT
+# or bridge the TUN/TAP interface to the internet
+# in order for this to work properly).
+;push "redirect-gateway def1 bypass-dhcp"
+
+# Certain Windows-specific network settings
+# can be pushed to clients, such as DNS
+# or WINS server addresses. CAVEAT:
+# http://openvpn.net/faq.html#dhcpcaveats
+# The addresses below refer to the public
+# DNS servers provided by opendns.com.
+;push "dhcp-option DNS 208.67.222.222"
+;push "dhcp-option DNS 208.67.220.220"
+
+# Uncomment this directive to allow different
+# clients to be able to "see" each other.
+# By default, clients will only see the server.
+# To force clients to only see the server, you
+# will also need to appropriately firewall the
+# server's TUN/TAP interface.
+;client-to-client
+
+# Uncomment this directive if multiple clients
+# might connect with the same certificate/key
+# files or common names. This is recommended
+# only for testing purposes. For production use,
+# each client should have its own certificate/key
+# pair.
+#
+# IF YOU HAVE NOT GENERATED INDIVIDUAL
+# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
+# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
+# UNCOMMENT THIS LINE OUT.
+;duplicate-cn
+
+# The keepalive directive causes ping-like
+# messages to be sent back and forth over
+# the link so that each side knows when
+# the other side has gone down.
+# Ping every 10 seconds, assume that remote
+# peer is down if no ping received during
+# a 120 second time period.
+keepalive 10 120
+
+# For extra security beyond that provided
+# by SSL/TLS, create an "HMAC firewall"
+# to help block DoS attacks and UDP port flooding.
+#
+# Generate with:
+# openvpn --genkey --secret ta.key
+#
+# The server and each client must have
+# a copy of this key.
+# The second parameter should be '0'
+# on the server and '1' on the clients.
+;tls-auth ta.key 0 # This file is secret
+
+# Select a cryptographic cipher.
+# This config item must be copied to
+# the client config file as well.
+;cipher BF-CBC # Blowfish (default)
+;cipher AES-128-CBC # AES
+;cipher DES-EDE3-CBC # Triple-DES
+
+# Enable compression on the VPN link.
+# If you enable it here, you must also
+# enable it in the client config file.
+comp-lzo
+
+# The maximum number of concurrently connected
+# clients we want to allow.
+;max-clients 100
+
+# It's a good idea to reduce the OpenVPN
+# daemon's privileges after initialization.
+#
+# You can uncomment this out on
+# non-Windows systems.
+;user nobody
+;group nobody
+
+# The persist options will try to avoid
+# accessing certain resources on restart
+# that may no longer be accessible because
+# of the privilege downgrade.
+persist-key
+persist-tun
+
+# Output a short status file showing
+# current connections, truncated
+# and rewritten every minute.
+status openvpn-status.log
+
+# By default, log messages will go to the syslog (or
+# on Windows, if running as a service, they will go to
+# the "\Program Files\OpenVPN\log" directory).
+# Use log or log-append to override this default.
+# "log" will truncate the log file on OpenVPN startup,
+# while "log-append" will append to it. Use one
+# or the other (but not both).
+;log openvpn.log
+;log-append openvpn.log
+
+# Set the appropriate level of log
+# file verbosity.
+#
+# 0 is silent, except for fatal errors
+# 4 is reasonable for general usage
+# 5 and 6 can help to debug connection problems
+# 9 is extremely verbose
+verb 3
+
+# Silence repeating messages. At most 20
+# sequential messages of the same message
+# category will be output to the log.
+;mute 20