summaryrefslogtreecommitdiff
path: root/bitmask_android/openssl/crypto/ripemd
diff options
context:
space:
mode:
Diffstat (limited to 'bitmask_android/openssl/crypto/ripemd')
-rw-r--r--bitmask_android/openssl/crypto/ripemd/README15
-rw-r--r--bitmask_android/openssl/crypto/ripemd/asm/rips.cpp82
-rw-r--r--bitmask_android/openssl/crypto/ripemd/asm/rmd-586.pl591
-rw-r--r--bitmask_android/openssl/crypto/ripemd/ripemd.h104
-rw-r--r--bitmask_android/openssl/crypto/ripemd/rmd160.c127
-rw-r--r--bitmask_android/openssl/crypto/ripemd/rmd_dgst.c291
-rw-r--r--bitmask_android/openssl/crypto/ripemd/rmd_locl.h150
-rw-r--r--bitmask_android/openssl/crypto/ripemd/rmd_one.c78
-rw-r--r--bitmask_android/openssl/crypto/ripemd/rmdconst.h399
-rw-r--r--bitmask_android/openssl/crypto/ripemd/rmdtest.c145
10 files changed, 1982 insertions, 0 deletions
diff --git a/bitmask_android/openssl/crypto/ripemd/README b/bitmask_android/openssl/crypto/ripemd/README
new file mode 100644
index 00000000..f1ffc8b1
--- /dev/null
+++ b/bitmask_android/openssl/crypto/ripemd/README
@@ -0,0 +1,15 @@
+RIPEMD-160
+http://www.esat.kuleuven.ac.be/~bosselae/ripemd160.html
+
+This is my implementation of RIPEMD-160. The pentium assember is a little
+off the pace since I only get 1050 cycles, while the best is 1013.
+I have a few ideas for how to get another 20 or so cycles, but at
+this point I will not bother right now. I believe the trick will be
+to remove my 'copy X array onto stack' until inside the RIP1() finctions the
+first time round. To do this I need another register and will only have one
+temporary one. A bit tricky.... I can also cleanup the saving of the 5 words
+after the first half of the calculation. I should read the origional
+value, add then write. Currently I just save the new and read the origioal.
+I then read both at the end. Bad.
+
+eric (20-Jan-1998)
diff --git a/bitmask_android/openssl/crypto/ripemd/asm/rips.cpp b/bitmask_android/openssl/crypto/ripemd/asm/rips.cpp
new file mode 100644
index 00000000..f7a13677
--- /dev/null
+++ b/bitmask_android/openssl/crypto/ripemd/asm/rips.cpp
@@ -0,0 +1,82 @@
+//
+// gettsc.inl
+//
+// gives access to the Pentium's (secret) cycle counter
+//
+// This software was written by Leonard Janke (janke@unixg.ubc.ca)
+// in 1996-7 and is entered, by him, into the public domain.
+
+#if defined(__WATCOMC__)
+void GetTSC(unsigned long&);
+#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
+#elif defined(__GNUC__)
+inline
+void GetTSC(unsigned long& tsc)
+{
+ asm volatile(".byte 15, 49\n\t"
+ : "=eax" (tsc)
+ :
+ : "%edx", "%eax");
+}
+#elif defined(_MSC_VER)
+inline
+void GetTSC(unsigned long& tsc)
+{
+ unsigned long a;
+ __asm _emit 0fh
+ __asm _emit 31h
+ __asm mov a, eax;
+ tsc=a;
+}
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <openssl/ripemd.h>
+
+#define ripemd160_block_x86 ripemd160_block_asm_host_order
+
+extern "C" {
+void ripemd160_block_x86(RIPEMD160_CTX *ctx, unsigned char *buffer,int num);
+}
+
+void main(int argc,char *argv[])
+ {
+ unsigned char buffer[64*256];
+ RIPEMD160_CTX ctx;
+ unsigned long s1,s2,e1,e2;
+ unsigned char k[16];
+ unsigned long data[2];
+ unsigned char iv[8];
+ int i,num=0,numm;
+ int j=0;
+
+ if (argc >= 2)
+ num=atoi(argv[1]);
+
+ if (num == 0) num=16;
+ if (num > 250) num=16;
+ numm=num+2;
+#if 0
+ num*=64;
+ numm*=64;
+#endif
+
+ for (j=0; j<6; j++)
+ {
+ for (i=0; i<10; i++) /**/
+ {
+ ripemd160_block_x86(&ctx,buffer,numm);
+ GetTSC(s1);
+ ripemd160_block_x86(&ctx,buffer,numm);
+ GetTSC(e1);
+ GetTSC(s2);
+ ripemd160_block_x86(&ctx,buffer,num);
+ GetTSC(e2);
+ ripemd160_block_x86(&ctx,buffer,num);
+ }
+ printf("ripemd160 (%d bytes) %d %d (%.2f)\n",num*64,
+ e1-s1,e2-s2,(double)((e1-s1)-(e2-s2))/2);
+ }
+ }
+
diff --git a/bitmask_android/openssl/crypto/ripemd/asm/rmd-586.pl b/bitmask_android/openssl/crypto/ripemd/asm/rmd-586.pl
new file mode 100644
index 00000000..e8b2bc2d
--- /dev/null
+++ b/bitmask_android/openssl/crypto/ripemd/asm/rmd-586.pl
@@ -0,0 +1,591 @@
+#!/usr/local/bin/perl
+
+# Normal is the
+# ripemd160_block_asm_data_order(RIPEMD160_CTX *c, ULONG *X,int blocks);
+
+$normal=0;
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
+require "x86asm.pl";
+
+&asm_init($ARGV[0],$0);
+
+$A="ecx";
+$B="esi";
+$C="edi";
+$D="ebx";
+$E="ebp";
+$tmp1="eax";
+$tmp2="edx";
+
+$KL1=0x5A827999;
+$KL2=0x6ED9EBA1;
+$KL3=0x8F1BBCDC;
+$KL4=0xA953FD4E;
+$KR0=0x50A28BE6;
+$KR1=0x5C4DD124;
+$KR2=0x6D703EF3;
+$KR3=0x7A6D76E9;
+
+
+@wl=( 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,15,
+ 7, 4,13, 1,10, 6,15, 3,12, 0, 9, 5, 2,14,11, 8,
+ 3,10,14, 4, 9,15, 8, 1, 2, 7, 0, 6,13,11, 5,12,
+ 1, 9,11,10, 0, 8,12, 4,13, 3, 7,15,14, 5, 6, 2,
+ 4, 0, 5, 9, 7,12, 2,10,14, 1, 3, 8,11, 6,15,13,
+ );
+
+@wr=( 5,14, 7, 0, 9, 2,11, 4,13, 6,15, 8, 1,10, 3,12,
+ 6,11, 3, 7, 0,13, 5,10,14,15, 8,12, 4, 9, 1, 2,
+ 15, 5, 1, 3, 7,14, 6, 9,11, 8,12, 2,10, 0, 4,13,
+ 8, 6, 4, 1, 3,11,15, 0, 5,12, 2,13, 9, 7,10,14,
+ 12,15,10, 4, 1, 5, 8, 7, 6, 2,13,14, 0, 3, 9,11,
+ );
+
+@sl=( 11,14,15,12, 5, 8, 7, 9,11,13,14,15, 6, 7, 9, 8,
+ 7, 6, 8,13,11, 9, 7,15, 7,12,15, 9,11, 7,13,12,
+ 11,13, 6, 7,14, 9,13,15,14, 8,13, 6, 5,12, 7, 5,
+ 11,12,14,15,14,15, 9, 8, 9,14, 5, 6, 8, 6, 5,12,
+ 9,15, 5,11, 6, 8,13,12, 5,12,13,14,11, 8, 5, 6,
+ );
+
+@sr=( 8, 9, 9,11,13,15,15, 5, 7, 7, 8,11,14,14,12, 6,
+ 9,13,15, 7,12, 8, 9,11, 7, 7,12, 7, 6,15,13,11,
+ 9, 7,15,11, 8, 6, 6,14,12,13, 5,14,13,13, 7, 5,
+ 15, 5, 8,11,14,14, 6,14, 6, 9,12, 9,12, 5,15, 8,
+ 8, 5,12, 9,12, 5,14, 6, 8,13, 6, 5,15,13,11,11,
+ );
+
+&ripemd160_block("ripemd160_block_asm_data_order");
+&asm_finish();
+
+sub Xv
+ {
+ local($n)=@_;
+ return(&swtmp($n));
+ # tmp on stack
+ }
+
+sub Np
+ {
+ local($p)=@_;
+ local(%n)=($A,$E,$B,$A,$C,$B,$D,$C,$E,$D);
+ return($n{$p});
+ }
+
+sub RIP1
+ {
+ local($a,$b,$c,$d,$e,$pos,$s,$o,$pos2)=@_;
+
+ &comment($p++);
+ if ($p & 1)
+ {
+ #&mov($tmp1, $c) if $o == -1;
+ &xor($tmp1, $d) if $o == -1;
+ &mov($tmp2, &Xv($pos));
+ &xor($tmp1, $b);
+ &add($a, $tmp2);
+ &rotl($c, 10);
+ &add($a, $tmp1);
+ &mov($tmp1, &Np($c)); # NEXT
+ # XXX
+ &rotl($a, $s);
+ &add($a, $e);
+ }
+ else
+ {
+ &xor($tmp1, $d);
+ &mov($tmp2, &Xv($pos));
+ &xor($tmp1, $b);
+ &add($a, $tmp1);
+ &mov($tmp1, &Np($c)) if $o <= 0;
+ &mov($tmp1, -1) if $o == 1;
+ # XXX if $o == 2;
+ &rotl($c, 10);
+ &add($a, $tmp2);
+ &xor($tmp1, &Np($d)) if $o <= 0;
+ &mov($tmp2, &Xv($pos2)) if $o == 1;
+ &mov($tmp2, &wparam(0)) if $o == 2;
+ &rotl($a, $s);
+ &add($a, $e);
+ }
+ }
+
+sub RIP2
+ {
+ local($a,$b,$c,$d,$e,$pos,$pos2,$s,$K,$o)=@_;
+
+# XXXXXX
+ &comment($p++);
+ if ($p & 1)
+ {
+# &mov($tmp2, &Xv($pos)) if $o < -1;
+# &mov($tmp1, -1) if $o < -1;
+
+ &add($a, $tmp2);
+ &mov($tmp2, $c);
+ &sub($tmp1, $b);
+ &and($tmp2, $b);
+ &and($tmp1, $d);
+ &or($tmp2, $tmp1);
+ &mov($tmp1, &Xv($pos2)) if $o <= 0; # XXXXXXXXXXXXXX
+ # XXX
+ &rotl($c, 10);
+ &lea($a, &DWP($K,$a,$tmp2,1));
+ &mov($tmp2, -1) if $o <= 0;
+ # XXX
+ &rotl($a, $s);
+ &add($a, $e);
+ }
+ else
+ {
+ # XXX
+ &add($a, $tmp1);
+ &mov($tmp1, $c);
+ &sub($tmp2, $b);
+ &and($tmp1, $b);
+ &and($tmp2, $d);
+ if ($o != 2)
+ {
+ &or($tmp1, $tmp2);
+ &mov($tmp2, &Xv($pos2)) if $o <= 0;
+ &mov($tmp2, -1) if $o == 1;
+ &rotl($c, 10);
+ &lea($a, &DWP($K,$a,$tmp1,1));
+ &mov($tmp1, -1) if $o <= 0;
+ &sub($tmp2, &Np($c)) if $o == 1;
+ } else {
+ &or($tmp2, $tmp1);
+ &mov($tmp1, &Np($c));
+ &rotl($c, 10);
+ &lea($a, &DWP($K,$a,$tmp2,1));
+ &xor($tmp1, &Np($d));
+ }
+ &rotl($a, $s);
+ &add($a, $e);
+ }
+ }
+
+sub RIP3
+ {
+ local($a,$b,$c,$d,$e,$pos,$s,$K,$o,$pos2)=@_;
+
+ &comment($p++);
+ if ($p & 1)
+ {
+# &mov($tmp2, -1) if $o < -1;
+# &sub($tmp2, $c) if $o < -1;
+ &mov($tmp1, &Xv($pos));
+ &or($tmp2, $b);
+ &add($a, $tmp1);
+ &xor($tmp2, $d);
+ &mov($tmp1, -1) if $o <= 0; # NEXT
+ # XXX
+ &rotl($c, 10);
+ &lea($a, &DWP($K,$a,$tmp2,1));
+ &sub($tmp1, &Np($c)) if $o <= 0; # NEXT
+ # XXX
+ &rotl($a, $s);
+ &add($a, $e);
+ }
+ else
+ {
+ &mov($tmp2, &Xv($pos));
+ &or($tmp1, $b);
+ &add($a, $tmp2);
+ &xor($tmp1, $d);
+ &mov($tmp2, -1) if $o <= 0; # NEXT
+ &mov($tmp2, -1) if $o == 1;
+ &mov($tmp2, &Xv($pos2)) if $o == 2;
+ &rotl($c, 10);
+ &lea($a, &DWP($K,$a,$tmp1,1));
+ &sub($tmp2, &Np($c)) if $o <= 0; # NEXT
+ &mov($tmp1, &Np($d)) if $o == 1;
+ &mov($tmp1, -1) if $o == 2;
+ &rotl($a, $s);
+ &add($a, $e);
+ }
+ }
+
+sub RIP4
+ {
+ local($a,$b,$c,$d,$e,$pos,$s,$K,$o)=@_;
+
+ &comment($p++);
+ if ($p & 1)
+ {
+# &mov($tmp2, -1) if $o == -2;
+# &mov($tmp1, $d) if $o == -2;
+ &sub($tmp2, $d);
+ &and($tmp1, $b);
+ &and($tmp2, $c);
+ &or($tmp2, $tmp1);
+ &mov($tmp1, &Xv($pos));
+ &rotl($c, 10);
+ &lea($a, &DWP($K,$a,$tmp2));
+ &mov($tmp2, -1) unless $o > 0; # NEXT
+ # XXX
+ &add($a, $tmp1);
+ &mov($tmp1, &Np($d)) unless $o > 0; # NEXT
+ # XXX
+ &rotl($a, $s);
+ &add($a, $e);
+ }
+ else
+ {
+ &sub($tmp2, $d);
+ &and($tmp1, $b);
+ &and($tmp2, $c);
+ &or($tmp2, $tmp1);
+ &mov($tmp1, &Xv($pos));
+ &rotl($c, 10);
+ &lea($a, &DWP($K,$a,$tmp2));
+ &mov($tmp2, -1) if $o == 0; # NEXT
+ &mov($tmp2, -1) if $o == 1;
+ &mov($tmp2, -1) if $o == 2;
+ # XXX
+ &add($a, $tmp1);
+ &mov($tmp1, &Np($d)) if $o == 0; # NEXT
+ &sub($tmp2, &Np($d)) if $o == 1;
+ &sub($tmp2, &Np($c)) if $o == 2;
+ # XXX
+ &rotl($a, $s);
+ &add($a, $e);
+ }
+ }
+
+sub RIP5
+ {
+ local($a,$b,$c,$d,$e,$pos,$s,$K,$o)=@_;
+
+ &comment($p++);
+ if ($p & 1)
+ {
+ &mov($tmp2, -1) if $o == -2;
+ &sub($tmp2, $d) if $o == -2;
+ &mov($tmp1, &Xv($pos));
+ &or($tmp2, $c);
+ &add($a, $tmp1);
+ &xor($tmp2, $b);
+ &mov($tmp1, -1) if $o <= 0;
+ # XXX
+ &rotl($c, 10);
+ &lea($a, &DWP($K,$a,$tmp2,1));
+ &sub($tmp1, &Np($d)) if $o <= 0;
+ # XXX
+ &rotl($a, $s);
+ &add($a, $e);
+ }
+ else
+ {
+ &mov($tmp2, &Xv($pos));
+ &or($tmp1, $c);
+ &add($a, $tmp2);
+ &xor($tmp1, $b);
+ &mov($tmp2, -1) if $o <= 0;
+ &mov($tmp2, &wparam(0)) if $o == 1; # Middle code
+ &mov($tmp2, -1) if $o == 2;
+ &rotl($c, 10);
+ &lea($a, &DWP($K,$a,$tmp1,1));
+ &sub($tmp2, &Np($d)) if $o <= 0;
+ &mov(&swtmp(16), $A) if $o == 1;
+ &mov($tmp1, &Np($d)) if $o == 2;
+ &rotl($a, $s);
+ &add($a, $e);
+ }
+ }
+
+sub ripemd160_block
+ {
+ local($name)=@_;
+
+ &function_begin_B($name,"",3);
+
+ # parameter 1 is the RIPEMD160_CTX structure.
+ # A 0
+ # B 4
+ # C 8
+ # D 12
+ # E 16
+
+ &mov($tmp2, &wparam(0));
+ &mov($tmp1, &wparam(1));
+ &push("esi");
+ &mov($A, &DWP( 0,$tmp2,"",0));
+ &push("edi");
+ &mov($B, &DWP( 4,$tmp2,"",0));
+ &push("ebp");
+ &mov($C, &DWP( 8,$tmp2,"",0));
+ &push("ebx");
+ &stack_push(16+5+6);
+ # Special comment about the figure of 6.
+ # Idea is to pad the current frame so
+ # that the top of the stack gets fairly
+ # aligned. Well, as you realize it would
+ # always depend on how the frame below is
+ # aligned. The good news are that gcc-2.95
+ # and later does keep first argument at
+ # least double-wise aligned.
+ # <appro@fy.chalmers.se>
+
+ &set_label("start") unless $normal;
+ &comment("");
+
+ # &mov($tmp1, &wparam(1)); # Done at end of loop
+ # &mov($tmp2, &wparam(0)); # Done at end of loop
+
+ for ($z=0; $z<16; $z+=2)
+ {
+ &mov($D, &DWP( $z*4,$tmp1,"",0));
+ &mov($E, &DWP( ($z+1)*4,$tmp1,"",0));
+ &mov(&swtmp($z), $D);
+ &mov(&swtmp($z+1), $E);
+ }
+ &mov($tmp1, $C);
+ &mov($D, &DWP(12,$tmp2,"",0));
+ &mov($E, &DWP(16,$tmp2,"",0));
+
+ &RIP1($A,$B,$C,$D,$E,$wl[ 0],$sl[ 0],-1);
+ &RIP1($E,$A,$B,$C,$D,$wl[ 1],$sl[ 1],0);
+ &RIP1($D,$E,$A,$B,$C,$wl[ 2],$sl[ 2],0);
+ &RIP1($C,$D,$E,$A,$B,$wl[ 3],$sl[ 3],0);
+ &RIP1($B,$C,$D,$E,$A,$wl[ 4],$sl[ 4],0);
+ &RIP1($A,$B,$C,$D,$E,$wl[ 5],$sl[ 5],0);
+ &RIP1($E,$A,$B,$C,$D,$wl[ 6],$sl[ 6],0);
+ &RIP1($D,$E,$A,$B,$C,$wl[ 7],$sl[ 7],0);
+ &RIP1($C,$D,$E,$A,$B,$wl[ 8],$sl[ 8],0);
+ &RIP1($B,$C,$D,$E,$A,$wl[ 9],$sl[ 9],0);
+ &RIP1($A,$B,$C,$D,$E,$wl[10],$sl[10],0);
+ &RIP1($E,$A,$B,$C,$D,$wl[11],$sl[11],0);
+ &RIP1($D,$E,$A,$B,$C,$wl[12],$sl[12],0);
+ &RIP1($C,$D,$E,$A,$B,$wl[13],$sl[13],0);
+ &RIP1($B,$C,$D,$E,$A,$wl[14],$sl[14],0);
+ &RIP1($A,$B,$C,$D,$E,$wl[15],$sl[15],1,$wl[16]);
+
+ &RIP2($E,$A,$B,$C,$D,$wl[16],$wl[17],$sl[16],$KL1,-1);
+ &RIP2($D,$E,$A,$B,$C,$wl[17],$wl[18],$sl[17],$KL1,0);
+ &RIP2($C,$D,$E,$A,$B,$wl[18],$wl[19],$sl[18],$KL1,0);
+ &RIP2($B,$C,$D,$E,$A,$wl[19],$wl[20],$sl[19],$KL1,0);
+ &RIP2($A,$B,$C,$D,$E,$wl[20],$wl[21],$sl[20],$KL1,0);
+ &RIP2($E,$A,$B,$C,$D,$wl[21],$wl[22],$sl[21],$KL1,0);
+ &RIP2($D,$E,$A,$B,$C,$wl[22],$wl[23],$sl[22],$KL1,0);
+ &RIP2($C,$D,$E,$A,$B,$wl[23],$wl[24],$sl[23],$KL1,0);
+ &RIP2($B,$C,$D,$E,$A,$wl[24],$wl[25],$sl[24],$KL1,0);
+ &RIP2($A,$B,$C,$D,$E,$wl[25],$wl[26],$sl[25],$KL1,0);
+ &RIP2($E,$A,$B,$C,$D,$wl[26],$wl[27],$sl[26],$KL1,0);
+ &RIP2($D,$E,$A,$B,$C,$wl[27],$wl[28],$sl[27],$KL1,0);
+ &RIP2($C,$D,$E,$A,$B,$wl[28],$wl[29],$sl[28],$KL1,0);
+ &RIP2($B,$C,$D,$E,$A,$wl[29],$wl[30],$sl[29],$KL1,0);
+ &RIP2($A,$B,$C,$D,$E,$wl[30],$wl[31],$sl[30],$KL1,0);
+ &RIP2($E,$A,$B,$C,$D,$wl[31],$wl[32],$sl[31],$KL1,1);
+
+ &RIP3($D,$E,$A,$B,$C,$wl[32],$sl[32],$KL2,-1);
+ &RIP3($C,$D,$E,$A,$B,$wl[33],$sl[33],$KL2,0);
+ &RIP3($B,$C,$D,$E,$A,$wl[34],$sl[34],$KL2,0);
+ &RIP3($A,$B,$C,$D,$E,$wl[35],$sl[35],$KL2,0);
+ &RIP3($E,$A,$B,$C,$D,$wl[36],$sl[36],$KL2,0);
+ &RIP3($D,$E,$A,$B,$C,$wl[37],$sl[37],$KL2,0);
+ &RIP3($C,$D,$E,$A,$B,$wl[38],$sl[38],$KL2,0);
+ &RIP3($B,$C,$D,$E,$A,$wl[39],$sl[39],$KL2,0);
+ &RIP3($A,$B,$C,$D,$E,$wl[40],$sl[40],$KL2,0);
+ &RIP3($E,$A,$B,$C,$D,$wl[41],$sl[41],$KL2,0);
+ &RIP3($D,$E,$A,$B,$C,$wl[42],$sl[42],$KL2,0);
+ &RIP3($C,$D,$E,$A,$B,$wl[43],$sl[43],$KL2,0);
+ &RIP3($B,$C,$D,$E,$A,$wl[44],$sl[44],$KL2,0);
+ &RIP3($A,$B,$C,$D,$E,$wl[45],$sl[45],$KL2,0);
+ &RIP3($E,$A,$B,$C,$D,$wl[46],$sl[46],$KL2,0);
+ &RIP3($D,$E,$A,$B,$C,$wl[47],$sl[47],$KL2,1);
+
+ &RIP4($C,$D,$E,$A,$B,$wl[48],$sl[48],$KL3,-1);
+ &RIP4($B,$C,$D,$E,$A,$wl[49],$sl[49],$KL3,0);
+ &RIP4($A,$B,$C,$D,$E,$wl[50],$sl[50],$KL3,0);
+ &RIP4($E,$A,$B,$C,$D,$wl[51],$sl[51],$KL3,0);
+ &RIP4($D,$E,$A,$B,$C,$wl[52],$sl[52],$KL3,0);
+ &RIP4($C,$D,$E,$A,$B,$wl[53],$sl[53],$KL3,0);
+ &RIP4($B,$C,$D,$E,$A,$wl[54],$sl[54],$KL3,0);
+ &RIP4($A,$B,$C,$D,$E,$wl[55],$sl[55],$KL3,0);
+ &RIP4($E,$A,$B,$C,$D,$wl[56],$sl[56],$KL3,0);
+ &RIP4($D,$E,$A,$B,$C,$wl[57],$sl[57],$KL3,0);
+ &RIP4($C,$D,$E,$A,$B,$wl[58],$sl[58],$KL3,0);
+ &RIP4($B,$C,$D,$E,$A,$wl[59],$sl[59],$KL3,0);
+ &RIP4($A,$B,$C,$D,$E,$wl[60],$sl[60],$KL3,0);
+ &RIP4($E,$A,$B,$C,$D,$wl[61],$sl[61],$KL3,0);
+ &RIP4($D,$E,$A,$B,$C,$wl[62],$sl[62],$KL3,0);
+ &RIP4($C,$D,$E,$A,$B,$wl[63],$sl[63],$KL3,1);
+
+ &RIP5($B,$C,$D,$E,$A,$wl[64],$sl[64],$KL4,-1);
+ &RIP5($A,$B,$C,$D,$E,$wl[65],$sl[65],$KL4,0);
+ &RIP5($E,$A,$B,$C,$D,$wl[66],$sl[66],$KL4,0);
+ &RIP5($D,$E,$A,$B,$C,$wl[67],$sl[67],$KL4,0);
+ &RIP5($C,$D,$E,$A,$B,$wl[68],$sl[68],$KL4,0);
+ &RIP5($B,$C,$D,$E,$A,$wl[69],$sl[69],$KL4,0);
+ &RIP5($A,$B,$C,$D,$E,$wl[70],$sl[70],$KL4,0);
+ &RIP5($E,$A,$B,$C,$D,$wl[71],$sl[71],$KL4,0);
+ &RIP5($D,$E,$A,$B,$C,$wl[72],$sl[72],$KL4,0);
+ &RIP5($C,$D,$E,$A,$B,$wl[73],$sl[73],$KL4,0);
+ &RIP5($B,$C,$D,$E,$A,$wl[74],$sl[74],$KL4,0);
+ &RIP5($A,$B,$C,$D,$E,$wl[75],$sl[75],$KL4,0);
+ &RIP5($E,$A,$B,$C,$D,$wl[76],$sl[76],$KL4,0);
+ &RIP5($D,$E,$A,$B,$C,$wl[77],$sl[77],$KL4,0);
+ &RIP5($C,$D,$E,$A,$B,$wl[78],$sl[78],$KL4,0);
+ &RIP5($B,$C,$D,$E,$A,$wl[79],$sl[79],$KL4,1);
+
+ # &mov($tmp2, &wparam(0)); # moved into last RIP5
+ # &mov(&swtmp(16), $A);
+ &mov($A, &DWP( 0,$tmp2,"",0));
+ &mov(&swtmp(16+1), $B);
+ &mov(&swtmp(16+2), $C);
+ &mov($B, &DWP( 4,$tmp2,"",0));
+ &mov(&swtmp(16+3), $D);
+ &mov($C, &DWP( 8,$tmp2,"",0));
+ &mov(&swtmp(16+4), $E);
+ &mov($D, &DWP(12,$tmp2,"",0));
+ &mov($E, &DWP(16,$tmp2,"",0));
+
+ &RIP5($A,$B,$C,$D,$E,$wr[ 0],$sr[ 0],$KR0,-2);
+ &RIP5($E,$A,$B,$C,$D,$wr[ 1],$sr[ 1],$KR0,0);
+ &RIP5($D,$E,$A,$B,$C,$wr[ 2],$sr[ 2],$KR0,0);
+ &RIP5($C,$D,$E,$A,$B,$wr[ 3],$sr[ 3],$KR0,0);
+ &RIP5($B,$C,$D,$E,$A,$wr[ 4],$sr[ 4],$KR0,0);
+ &RIP5($A,$B,$C,$D,$E,$wr[ 5],$sr[ 5],$KR0,0);
+ &RIP5($E,$A,$B,$C,$D,$wr[ 6],$sr[ 6],$KR0,0);
+ &RIP5($D,$E,$A,$B,$C,$wr[ 7],$sr[ 7],$KR0,0);
+ &RIP5($C,$D,$E,$A,$B,$wr[ 8],$sr[ 8],$KR0,0);
+ &RIP5($B,$C,$D,$E,$A,$wr[ 9],$sr[ 9],$KR0,0);
+ &RIP5($A,$B,$C,$D,$E,$wr[10],$sr[10],$KR0,0);
+ &RIP5($E,$A,$B,$C,$D,$wr[11],$sr[11],$KR0,0);
+ &RIP5($D,$E,$A,$B,$C,$wr[12],$sr[12],$KR0,0);
+ &RIP5($C,$D,$E,$A,$B,$wr[13],$sr[13],$KR0,0);
+ &RIP5($B,$C,$D,$E,$A,$wr[14],$sr[14],$KR0,0);
+ &RIP5($A,$B,$C,$D,$E,$wr[15],$sr[15],$KR0,2);
+
+ &RIP4($E,$A,$B,$C,$D,$wr[16],$sr[16],$KR1,-2);
+ &RIP4($D,$E,$A,$B,$C,$wr[17],$sr[17],$KR1,0);
+ &RIP4($C,$D,$E,$A,$B,$wr[18],$sr[18],$KR1,0);
+ &RIP4($B,$C,$D,$E,$A,$wr[19],$sr[19],$KR1,0);
+ &RIP4($A,$B,$C,$D,$E,$wr[20],$sr[20],$KR1,0);
+ &RIP4($E,$A,$B,$C,$D,$wr[21],$sr[21],$KR1,0);
+ &RIP4($D,$E,$A,$B,$C,$wr[22],$sr[22],$KR1,0);
+ &RIP4($C,$D,$E,$A,$B,$wr[23],$sr[23],$KR1,0);
+ &RIP4($B,$C,$D,$E,$A,$wr[24],$sr[24],$KR1,0);
+ &RIP4($A,$B,$C,$D,$E,$wr[25],$sr[25],$KR1,0);
+ &RIP4($E,$A,$B,$C,$D,$wr[26],$sr[26],$KR1,0);
+ &RIP4($D,$E,$A,$B,$C,$wr[27],$sr[27],$KR1,0);
+ &RIP4($C,$D,$E,$A,$B,$wr[28],$sr[28],$KR1,0);
+ &RIP4($B,$C,$D,$E,$A,$wr[29],$sr[29],$KR1,0);
+ &RIP4($A,$B,$C,$D,$E,$wr[30],$sr[30],$KR1,0);
+ &RIP4($E,$A,$B,$C,$D,$wr[31],$sr[31],$KR1,2);
+
+ &RIP3($D,$E,$A,$B,$C,$wr[32],$sr[32],$KR2,-2);
+ &RIP3($C,$D,$E,$A,$B,$wr[33],$sr[33],$KR2,0);
+ &RIP3($B,$C,$D,$E,$A,$wr[34],$sr[34],$KR2,0);
+ &RIP3($A,$B,$C,$D,$E,$wr[35],$sr[35],$KR2,0);
+ &RIP3($E,$A,$B,$C,$D,$wr[36],$sr[36],$KR2,0);
+ &RIP3($D,$E,$A,$B,$C,$wr[37],$sr[37],$KR2,0);
+ &RIP3($C,$D,$E,$A,$B,$wr[38],$sr[38],$KR2,0);
+ &RIP3($B,$C,$D,$E,$A,$wr[39],$sr[39],$KR2,0);
+ &RIP3($A,$B,$C,$D,$E,$wr[40],$sr[40],$KR2,0);
+ &RIP3($E,$A,$B,$C,$D,$wr[41],$sr[41],$KR2,0);
+ &RIP3($D,$E,$A,$B,$C,$wr[42],$sr[42],$KR2,0);
+ &RIP3($C,$D,$E,$A,$B,$wr[43],$sr[43],$KR2,0);
+ &RIP3($B,$C,$D,$E,$A,$wr[44],$sr[44],$KR2,0);
+ &RIP3($A,$B,$C,$D,$E,$wr[45],$sr[45],$KR2,0);
+ &RIP3($E,$A,$B,$C,$D,$wr[46],$sr[46],$KR2,0);
+ &RIP3($D,$E,$A,$B,$C,$wr[47],$sr[47],$KR2,2,$wr[48]);
+
+ &RIP2($C,$D,$E,$A,$B,$wr[48],$wr[49],$sr[48],$KR3,-2);
+ &RIP2($B,$C,$D,$E,$A,$wr[49],$wr[50],$sr[49],$KR3,0);
+ &RIP2($A,$B,$C,$D,$E,$wr[50],$wr[51],$sr[50],$KR3,0);
+ &RIP2($E,$A,$B,$C,$D,$wr[51],$wr[52],$sr[51],$KR3,0);
+ &RIP2($D,$E,$A,$B,$C,$wr[52],$wr[53],$sr[52],$KR3,0);
+ &RIP2($C,$D,$E,$A,$B,$wr[53],$wr[54],$sr[53],$KR3,0);
+ &RIP2($B,$C,$D,$E,$A,$wr[54],$wr[55],$sr[54],$KR3,0);
+ &RIP2($A,$B,$C,$D,$E,$wr[55],$wr[56],$sr[55],$KR3,0);
+ &RIP2($E,$A,$B,$C,$D,$wr[56],$wr[57],$sr[56],$KR3,0);
+ &RIP2($D,$E,$A,$B,$C,$wr[57],$wr[58],$sr[57],$KR3,0);
+ &RIP2($C,$D,$E,$A,$B,$wr[58],$wr[59],$sr[58],$KR3,0);
+ &RIP2($B,$C,$D,$E,$A,$wr[59],$wr[60],$sr[59],$KR3,0);
+ &RIP2($A,$B,$C,$D,$E,$wr[60],$wr[61],$sr[60],$KR3,0);
+ &RIP2($E,$A,$B,$C,$D,$wr[61],$wr[62],$sr[61],$KR3,0);
+ &RIP2($D,$E,$A,$B,$C,$wr[62],$wr[63],$sr[62],$KR3,0);
+ &RIP2($C,$D,$E,$A,$B,$wr[63],$wr[64],$sr[63],$KR3,2);
+
+ &RIP1($B,$C,$D,$E,$A,$wr[64],$sr[64],-2);
+ &RIP1($A,$B,$C,$D,$E,$wr[65],$sr[65],0);
+ &RIP1($E,$A,$B,$C,$D,$wr[66],$sr[66],0);
+ &RIP1($D,$E,$A,$B,$C,$wr[67],$sr[67],0);
+ &RIP1($C,$D,$E,$A,$B,$wr[68],$sr[68],0);
+ &RIP1($B,$C,$D,$E,$A,$wr[69],$sr[69],0);
+ &RIP1($A,$B,$C,$D,$E,$wr[70],$sr[70],0);
+ &RIP1($E,$A,$B,$C,$D,$wr[71],$sr[71],0);
+ &RIP1($D,$E,$A,$B,$C,$wr[72],$sr[72],0);
+ &RIP1($C,$D,$E,$A,$B,$wr[73],$sr[73],0);
+ &RIP1($B,$C,$D,$E,$A,$wr[74],$sr[74],0);
+ &RIP1($A,$B,$C,$D,$E,$wr[75],$sr[75],0);
+ &RIP1($E,$A,$B,$C,$D,$wr[76],$sr[76],0);
+ &RIP1($D,$E,$A,$B,$C,$wr[77],$sr[77],0);
+ &RIP1($C,$D,$E,$A,$B,$wr[78],$sr[78],0);
+ &RIP1($B,$C,$D,$E,$A,$wr[79],$sr[79],2);
+
+ # &mov($tmp2, &wparam(0)); # Moved into last round
+
+ &mov($tmp1, &DWP( 4,$tmp2,"",0)); # ctx->B
+ &add($D, $tmp1);
+ &mov($tmp1, &swtmp(16+2)); # $c
+ &add($D, $tmp1);
+
+ &mov($tmp1, &DWP( 8,$tmp2,"",0)); # ctx->C
+ &add($E, $tmp1);
+ &mov($tmp1, &swtmp(16+3)); # $d
+ &add($E, $tmp1);
+
+ &mov($tmp1, &DWP(12,$tmp2,"",0)); # ctx->D
+ &add($A, $tmp1);
+ &mov($tmp1, &swtmp(16+4)); # $e
+ &add($A, $tmp1);
+
+
+ &mov($tmp1, &DWP(16,$tmp2,"",0)); # ctx->E
+ &add($B, $tmp1);
+ &mov($tmp1, &swtmp(16+0)); # $a
+ &add($B, $tmp1);
+
+ &mov($tmp1, &DWP( 0,$tmp2,"",0)); # ctx->A
+ &add($C, $tmp1);
+ &mov($tmp1, &swtmp(16+1)); # $b
+ &add($C, $tmp1);
+
+ &mov($tmp1, &wparam(2));
+
+ &mov(&DWP( 0,$tmp2,"",0), $D);
+ &mov(&DWP( 4,$tmp2,"",0), $E);
+ &mov(&DWP( 8,$tmp2,"",0), $A);
+ &sub($tmp1,1);
+ &mov(&DWP(12,$tmp2,"",0), $B);
+ &mov(&DWP(16,$tmp2,"",0), $C);
+
+ &jle(&label("get_out"));
+
+ &mov(&wparam(2),$tmp1);
+ &mov($C, $A);
+ &mov($tmp1, &wparam(1));
+ &mov($A, $D);
+ &add($tmp1, 64);
+ &mov($B, $E);
+ &mov(&wparam(1),$tmp1);
+
+ &jmp(&label("start"));
+
+ &set_label("get_out");
+
+ &stack_pop(16+5+6);
+
+ &pop("ebx");
+ &pop("ebp");
+ &pop("edi");
+ &pop("esi");
+ &ret();
+ &function_end_B($name);
+ }
+
diff --git a/bitmask_android/openssl/crypto/ripemd/ripemd.h b/bitmask_android/openssl/crypto/ripemd/ripemd.h
new file mode 100644
index 00000000..5942eb61
--- /dev/null
+++ b/bitmask_android/openssl/crypto/ripemd/ripemd.h
@@ -0,0 +1,104 @@
+/* crypto/ripemd/ripemd.h */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to. The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code. The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * "This product includes cryptographic software written by
+ * Eric Young (eay@cryptsoft.com)"
+ * The word 'cryptographic' can be left out if the rouines from the library
+ * being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ * the apps directory (application code) you must include an acknowledgement:
+ * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed. i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#ifndef HEADER_RIPEMD_H
+#define HEADER_RIPEMD_H
+
+#include <openssl/e_os2.h>
+#include <stddef.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef OPENSSL_NO_RIPEMD
+#error RIPEMD is disabled.
+#endif
+
+#if defined(__LP32__)
+#define RIPEMD160_LONG unsigned long
+#elif defined(OPENSSL_SYS_CRAY) || defined(__ILP64__)
+#define RIPEMD160_LONG unsigned long
+#define RIPEMD160_LONG_LOG2 3
+#else
+#define RIPEMD160_LONG unsigned int
+#endif
+
+#define RIPEMD160_CBLOCK 64
+#define RIPEMD160_LBLOCK (RIPEMD160_CBLOCK/4)
+#define RIPEMD160_DIGEST_LENGTH 20
+
+typedef struct RIPEMD160state_st
+ {
+ RIPEMD160_LONG A,B,C,D,E;
+ RIPEMD160_LONG Nl,Nh;
+ RIPEMD160_LONG data[RIPEMD160_LBLOCK];
+ unsigned int num;
+ } RIPEMD160_CTX;
+
+int RIPEMD160_Init(RIPEMD160_CTX *c);
+int RIPEMD160_Update(RIPEMD160_CTX *c, const void *data, size_t len);
+int RIPEMD160_Final(unsigned char *md, RIPEMD160_CTX *c);
+unsigned char *RIPEMD160(const unsigned char *d, size_t n,
+ unsigned char *md);
+void RIPEMD160_Transform(RIPEMD160_CTX *c, const unsigned char *b);
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/bitmask_android/openssl/crypto/ripemd/rmd160.c b/bitmask_android/openssl/crypto/ripemd/rmd160.c
new file mode 100644
index 00000000..b0ec5744
--- /dev/null
+++ b/bitmask_android/openssl/crypto/ripemd/rmd160.c
@@ -0,0 +1,127 @@
+/* crypto/ripemd/rmd160.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to. The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code. The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * "This product includes cryptographic software written by
+ * Eric Young (eay@cryptsoft.com)"
+ * The word 'cryptographic' can be left out if the rouines from the library
+ * being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ * the apps directory (application code) you must include an acknowledgement:
+ * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed. i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <openssl/ripemd.h>
+
+#define BUFSIZE 1024*16
+
+void do_fp(FILE *f);
+void pt(unsigned char *md);
+#if !defined(_OSD_POSIX) && !defined(__DJGPP__)
+int read(int, void *, unsigned int);
+#endif
+
+int main(int argc, char **argv)
+ {
+ int i,err=0;
+ FILE *IN;
+
+ if (argc == 1)
+ {
+ do_fp(stdin);
+ }
+ else
+ {
+ for (i=1; i<argc; i++)
+ {
+ IN=fopen(argv[i],"r");
+ if (IN == NULL)
+ {
+ perror(argv[i]);
+ err++;
+ continue;
+ }
+ printf("RIPEMD160(%s)= ",argv[i]);
+ do_fp(IN);
+ fclose(IN);
+ }
+ }
+ exit(err);
+ }
+
+void do_fp(FILE *f)
+ {
+ RIPEMD160_CTX c;
+ unsigned char md[RIPEMD160_DIGEST_LENGTH];
+ int fd;
+ int i;
+ static unsigned char buf[BUFSIZE];
+
+ fd=fileno(f);
+ RIPEMD160_Init(&c);
+ for (;;)
+ {
+ i=read(fd,buf,BUFSIZE);
+ if (i <= 0) break;
+ RIPEMD160_Update(&c,buf,(unsigned long)i);
+ }
+ RIPEMD160_Final(&(md[0]),&c);
+ pt(md);
+ }
+
+void pt(unsigned char *md)
+ {
+ int i;
+
+ for (i=0; i<RIPEMD160_DIGEST_LENGTH; i++)
+ printf("%02x",md[i]);
+ printf("\n");
+ }
+
diff --git a/bitmask_android/openssl/crypto/ripemd/rmd_dgst.c b/bitmask_android/openssl/crypto/ripemd/rmd_dgst.c
new file mode 100644
index 00000000..59b017f8
--- /dev/null
+++ b/bitmask_android/openssl/crypto/ripemd/rmd_dgst.c
@@ -0,0 +1,291 @@
+/* crypto/ripemd/rmd_dgst.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to. The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code. The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * "This product includes cryptographic software written by
+ * Eric Young (eay@cryptsoft.com)"
+ * The word 'cryptographic' can be left out if the rouines from the library
+ * being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ * the apps directory (application code) you must include an acknowledgement:
+ * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed. i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include "rmd_locl.h"
+#include <openssl/opensslv.h>
+
+const char RMD160_version[]="RIPE-MD160" OPENSSL_VERSION_PTEXT;
+
+# ifdef RMD160_ASM
+ void ripemd160_block_x86(RIPEMD160_CTX *c, unsigned long *p,size_t num);
+# define ripemd160_block ripemd160_block_x86
+# else
+ void ripemd160_block(RIPEMD160_CTX *c, unsigned long *p,size_t num);
+# endif
+
+int RIPEMD160_Init(RIPEMD160_CTX *c)
+ {
+ memset (c,0,sizeof(*c));
+ c->A=RIPEMD160_A;
+ c->B=RIPEMD160_B;
+ c->C=RIPEMD160_C;
+ c->D=RIPEMD160_D;
+ c->E=RIPEMD160_E;
+ return 1;
+ }
+
+#ifndef ripemd160_block_data_order
+#ifdef X
+#undef X
+#endif
+void ripemd160_block_data_order (RIPEMD160_CTX *ctx, const void *p, size_t num)
+ {
+ const unsigned char *data=p;
+ register unsigned MD32_REG_T A,B,C,D,E;
+ unsigned MD32_REG_T a,b,c,d,e,l;
+#ifndef MD32_XARRAY
+ /* See comment in crypto/sha/sha_locl.h for details. */
+ unsigned MD32_REG_T XX0, XX1, XX2, XX3, XX4, XX5, XX6, XX7,
+ XX8, XX9,XX10,XX11,XX12,XX13,XX14,XX15;
+# define X(i) XX##i
+#else
+ RIPEMD160_LONG XX[16];
+# define X(i) XX[i]
+#endif
+
+ for (;num--;)
+ {
+
+ A=ctx->A; B=ctx->B; C=ctx->C; D=ctx->D; E=ctx->E;
+
+ HOST_c2l(data,l); X( 0)=l; HOST_c2l(data,l); X( 1)=l;
+ RIP1(A,B,C,D,E,WL00,SL00); HOST_c2l(data,l); X( 2)=l;
+ RIP1(E,A,B,C,D,WL01,SL01); HOST_c2l(data,l); X( 3)=l;
+ RIP1(D,E,A,B,C,WL02,SL02); HOST_c2l(data,l); X( 4)=l;
+ RIP1(C,D,E,A,B,WL03,SL03); HOST_c2l(data,l); X( 5)=l;
+ RIP1(B,C,D,E,A,WL04,SL04); HOST_c2l(data,l); X( 6)=l;
+ RIP1(A,B,C,D,E,WL05,SL05); HOST_c2l(data,l); X( 7)=l;
+ RIP1(E,A,B,C,D,WL06,SL06); HOST_c2l(data,l); X( 8)=l;
+ RIP1(D,E,A,B,C,WL07,SL07); HOST_c2l(data,l); X( 9)=l;
+ RIP1(C,D,E,A,B,WL08,SL08); HOST_c2l(data,l); X(10)=l;
+ RIP1(B,C,D,E,A,WL09,SL09); HOST_c2l(data,l); X(11)=l;
+ RIP1(A,B,C,D,E,WL10,SL10); HOST_c2l(data,l); X(12)=l;
+ RIP1(E,A,B,C,D,WL11,SL11); HOST_c2l(data,l); X(13)=l;
+ RIP1(D,E,A,B,C,WL12,SL12); HOST_c2l(data,l); X(14)=l;
+ RIP1(C,D,E,A,B,WL13,SL13); HOST_c2l(data,l); X(15)=l;
+ RIP1(B,C,D,E,A,WL14,SL14);
+ RIP1(A,B,C,D,E,WL15,SL15);
+
+ RIP2(E,A,B,C,D,WL16,SL16,KL1);
+ RIP2(D,E,A,B,C,WL17,SL17,KL1);
+ RIP2(C,D,E,A,B,WL18,SL18,KL1);
+ RIP2(B,C,D,E,A,WL19,SL19,KL1);
+ RIP2(A,B,C,D,E,WL20,SL20,KL1);
+ RIP2(E,A,B,C,D,WL21,SL21,KL1);
+ RIP2(D,E,A,B,C,WL22,SL22,KL1);
+ RIP2(C,D,E,A,B,WL23,SL23,KL1);
+ RIP2(B,C,D,E,A,WL24,SL24,KL1);
+ RIP2(A,B,C,D,E,WL25,SL25,KL1);
+ RIP2(E,A,B,C,D,WL26,SL26,KL1);
+ RIP2(D,E,A,B,C,WL27,SL27,KL1);
+ RIP2(C,D,E,A,B,WL28,SL28,KL1);
+ RIP2(B,C,D,E,A,WL29,SL29,KL1);
+ RIP2(A,B,C,D,E,WL30,SL30,KL1);
+ RIP2(E,A,B,C,D,WL31,SL31,KL1);
+
+ RIP3(D,E,A,B,C,WL32,SL32,KL2);
+ RIP3(C,D,E,A,B,WL33,SL33,KL2);
+ RIP3(B,C,D,E,A,WL34,SL34,KL2);
+ RIP3(A,B,C,D,E,WL35,SL35,KL2);
+ RIP3(E,A,B,C,D,WL36,SL36,KL2);
+ RIP3(D,E,A,B,C,WL37,SL37,KL2);
+ RIP3(C,D,E,A,B,WL38,SL38,KL2);
+ RIP3(B,C,D,E,A,WL39,SL39,KL2);
+ RIP3(A,B,C,D,E,WL40,SL40,KL2);
+ RIP3(E,A,B,C,D,WL41,SL41,KL2);
+ RIP3(D,E,A,B,C,WL42,SL42,KL2);
+ RIP3(C,D,E,A,B,WL43,SL43,KL2);
+ RIP3(B,C,D,E,A,WL44,SL44,KL2);
+ RIP3(A,B,C,D,E,WL45,SL45,KL2);
+ RIP3(E,A,B,C,D,WL46,SL46,KL2);
+ RIP3(D,E,A,B,C,WL47,SL47,KL2);
+
+ RIP4(C,D,E,A,B,WL48,SL48,KL3);
+ RIP4(B,C,D,E,A,WL49,SL49,KL3);
+ RIP4(A,B,C,D,E,WL50,SL50,KL3);
+ RIP4(E,A,B,C,D,WL51,SL51,KL3);
+ RIP4(D,E,A,B,C,WL52,SL52,KL3);
+ RIP4(C,D,E,A,B,WL53,SL53,KL3);
+ RIP4(B,C,D,E,A,WL54,SL54,KL3);
+ RIP4(A,B,C,D,E,WL55,SL55,KL3);
+ RIP4(E,A,B,C,D,WL56,SL56,KL3);
+ RIP4(D,E,A,B,C,WL57,SL57,KL3);
+ RIP4(C,D,E,A,B,WL58,SL58,KL3);
+ RIP4(B,C,D,E,A,WL59,SL59,KL3);
+ RIP4(A,B,C,D,E,WL60,SL60,KL3);
+ RIP4(E,A,B,C,D,WL61,SL61,KL3);
+ RIP4(D,E,A,B,C,WL62,SL62,KL3);
+ RIP4(C,D,E,A,B,WL63,SL63,KL3);
+
+ RIP5(B,C,D,E,A,WL64,SL64,KL4);
+ RIP5(A,B,C,D,E,WL65,SL65,KL4);
+ RIP5(E,A,B,C,D,WL66,SL66,KL4);
+ RIP5(D,E,A,B,C,WL67,SL67,KL4);
+ RIP5(C,D,E,A,B,WL68,SL68,KL4);
+ RIP5(B,C,D,E,A,WL69,SL69,KL4);
+ RIP5(A,B,C,D,E,WL70,SL70,KL4);
+ RIP5(E,A,B,C,D,WL71,SL71,KL4);
+ RIP5(D,E,A,B,C,WL72,SL72,KL4);
+ RIP5(C,D,E,A,B,WL73,SL73,KL4);
+ RIP5(B,C,D,E,A,WL74,SL74,KL4);
+ RIP5(A,B,C,D,E,WL75,SL75,KL4);
+ RIP5(E,A,B,C,D,WL76,SL76,KL4);
+ RIP5(D,E,A,B,C,WL77,SL77,KL4);
+ RIP5(C,D,E,A,B,WL78,SL78,KL4);
+ RIP5(B,C,D,E,A,WL79,SL79,KL4);
+
+ a=A; b=B; c=C; d=D; e=E;
+ /* Do other half */
+ A=ctx->A; B=ctx->B; C=ctx->C; D=ctx->D; E=ctx->E;
+
+ RIP5(A,B,C,D,E,WR00,SR00,KR0);
+ RIP5(E,A,B,C,D,WR01,SR01,KR0);
+ RIP5(D,E,A,B,C,WR02,SR02,KR0);
+ RIP5(C,D,E,A,B,WR03,SR03,KR0);
+ RIP5(B,C,D,E,A,WR04,SR04,KR0);
+ RIP5(A,B,C,D,E,WR05,SR05,KR0);
+ RIP5(E,A,B,C,D,WR06,SR06,KR0);
+ RIP5(D,E,A,B,C,WR07,SR07,KR0);
+ RIP5(C,D,E,A,B,WR08,SR08,KR0);
+ RIP5(B,C,D,E,A,WR09,SR09,KR0);
+ RIP5(A,B,C,D,E,WR10,SR10,KR0);
+ RIP5(E,A,B,C,D,WR11,SR11,KR0);
+ RIP5(D,E,A,B,C,WR12,SR12,KR0);
+ RIP5(C,D,E,A,B,WR13,SR13,KR0);
+ RIP5(B,C,D,E,A,WR14,SR14,KR0);
+ RIP5(A,B,C,D,E,WR15,SR15,KR0);
+
+ RIP4(E,A,B,C,D,WR16,SR16,KR1);
+ RIP4(D,E,A,B,C,WR17,SR17,KR1);
+ RIP4(C,D,E,A,B,WR18,SR18,KR1);
+ RIP4(B,C,D,E,A,WR19,SR19,KR1);
+ RIP4(A,B,C,D,E,WR20,SR20,KR1);
+ RIP4(E,A,B,C,D,WR21,SR21,KR1);
+ RIP4(D,E,A,B,C,WR22,SR22,KR1);
+ RIP4(C,D,E,A,B,WR23,SR23,KR1);
+ RIP4(B,C,D,E,A,WR24,SR24,KR1);
+ RIP4(A,B,C,D,E,WR25,SR25,KR1);
+ RIP4(E,A,B,C,D,WR26,SR26,KR1);
+ RIP4(D,E,A,B,C,WR27,SR27,KR1);
+ RIP4(C,D,E,A,B,WR28,SR28,KR1);
+ RIP4(B,C,D,E,A,WR29,SR29,KR1);
+ RIP4(A,B,C,D,E,WR30,SR30,KR1);
+ RIP4(E,A,B,C,D,WR31,SR31,KR1);
+
+ RIP3(D,E,A,B,C,WR32,SR32,KR2);
+ RIP3(C,D,E,A,B,WR33,SR33,KR2);
+ RIP3(B,C,D,E,A,WR34,SR34,KR2);
+ RIP3(A,B,C,D,E,WR35,SR35,KR2);
+ RIP3(E,A,B,C,D,WR36,SR36,KR2);
+ RIP3(D,E,A,B,C,WR37,SR37,KR2);
+ RIP3(C,D,E,A,B,WR38,SR38,KR2);
+ RIP3(B,C,D,E,A,WR39,SR39,KR2);
+ RIP3(A,B,C,D,E,WR40,SR40,KR2);
+ RIP3(E,A,B,C,D,WR41,SR41,KR2);
+ RIP3(D,E,A,B,C,WR42,SR42,KR2);
+ RIP3(C,D,E,A,B,WR43,SR43,KR2);
+ RIP3(B,C,D,E,A,WR44,SR44,KR2);
+ RIP3(A,B,C,D,E,WR45,SR45,KR2);
+ RIP3(E,A,B,C,D,WR46,SR46,KR2);
+ RIP3(D,E,A,B,C,WR47,SR47,KR2);
+
+ RIP2(C,D,E,A,B,WR48,SR48,KR3);
+ RIP2(B,C,D,E,A,WR49,SR49,KR3);
+ RIP2(A,B,C,D,E,WR50,SR50,KR3);
+ RIP2(E,A,B,C,D,WR51,SR51,KR3);
+ RIP2(D,E,A,B,C,WR52,SR52,KR3);
+ RIP2(C,D,E,A,B,WR53,SR53,KR3);
+ RIP2(B,C,D,E,A,WR54,SR54,KR3);
+ RIP2(A,B,C,D,E,WR55,SR55,KR3);
+ RIP2(E,A,B,C,D,WR56,SR56,KR3);
+ RIP2(D,E,A,B,C,WR57,SR57,KR3);
+ RIP2(C,D,E,A,B,WR58,SR58,KR3);
+ RIP2(B,C,D,E,A,WR59,SR59,KR3);
+ RIP2(A,B,C,D,E,WR60,SR60,KR3);
+ RIP2(E,A,B,C,D,WR61,SR61,KR3);
+ RIP2(D,E,A,B,C,WR62,SR62,KR3);
+ RIP2(C,D,E,A,B,WR63,SR63,KR3);
+
+ RIP1(B,C,D,E,A,WR64,SR64);
+ RIP1(A,B,C,D,E,WR65,SR65);
+ RIP1(E,A,B,C,D,WR66,SR66);
+ RIP1(D,E,A,B,C,WR67,SR67);
+ RIP1(C,D,E,A,B,WR68,SR68);
+ RIP1(B,C,D,E,A,WR69,SR69);
+ RIP1(A,B,C,D,E,WR70,SR70);
+ RIP1(E,A,B,C,D,WR71,SR71);
+ RIP1(D,E,A,B,C,WR72,SR72);
+ RIP1(C,D,E,A,B,WR73,SR73);
+ RIP1(B,C,D,E,A,WR74,SR74);
+ RIP1(A,B,C,D,E,WR75,SR75);
+ RIP1(E,A,B,C,D,WR76,SR76);
+ RIP1(D,E,A,B,C,WR77,SR77);
+ RIP1(C,D,E,A,B,WR78,SR78);
+ RIP1(B,C,D,E,A,WR79,SR79);
+
+ D =ctx->B+c+D;
+ ctx->B=ctx->C+d+E;
+ ctx->C=ctx->D+e+A;
+ ctx->D=ctx->E+a+B;
+ ctx->E=ctx->A+b+C;
+ ctx->A=D;
+
+ }
+ }
+#endif
diff --git a/bitmask_android/openssl/crypto/ripemd/rmd_locl.h b/bitmask_android/openssl/crypto/ripemd/rmd_locl.h
new file mode 100644
index 00000000..f14b346e
--- /dev/null
+++ b/bitmask_android/openssl/crypto/ripemd/rmd_locl.h
@@ -0,0 +1,150 @@
+/* crypto/ripemd/rmd_locl.h */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to. The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code. The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * "This product includes cryptographic software written by
+ * Eric Young (eay@cryptsoft.com)"
+ * The word 'cryptographic' can be left out if the rouines from the library
+ * being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ * the apps directory (application code) you must include an acknowledgement:
+ * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed. i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include <openssl/opensslconf.h>
+#include <openssl/ripemd.h>
+
+#ifndef RIPEMD160_LONG_LOG2
+#define RIPEMD160_LONG_LOG2 2 /* default to 32 bits */
+#endif
+
+/*
+ * DO EXAMINE COMMENTS IN crypto/md5/md5_locl.h & crypto/md5/md5_dgst.c
+ * FOR EXPLANATIONS ON FOLLOWING "CODE."
+ * <appro@fy.chalmers.se>
+ */
+#ifdef RMD160_ASM
+# if defined(__i386) || defined(__i386__) || defined(_M_IX86) || defined(__INTEL__)
+# define ripemd160_block_data_order ripemd160_block_asm_data_order
+# endif
+#endif
+
+void ripemd160_block_data_order (RIPEMD160_CTX *c, const void *p,size_t num);
+
+#define DATA_ORDER_IS_LITTLE_ENDIAN
+
+#define HASH_LONG RIPEMD160_LONG
+#define HASH_CTX RIPEMD160_CTX
+#define HASH_CBLOCK RIPEMD160_CBLOCK
+#define HASH_UPDATE RIPEMD160_Update
+#define HASH_TRANSFORM RIPEMD160_Transform
+#define HASH_FINAL RIPEMD160_Final
+#define HASH_MAKE_STRING(c,s) do { \
+ unsigned long ll; \
+ ll=(c)->A; HOST_l2c(ll,(s)); \
+ ll=(c)->B; HOST_l2c(ll,(s)); \
+ ll=(c)->C; HOST_l2c(ll,(s)); \
+ ll=(c)->D; HOST_l2c(ll,(s)); \
+ ll=(c)->E; HOST_l2c(ll,(s)); \
+ } while (0)
+#define HASH_BLOCK_DATA_ORDER ripemd160_block_data_order
+
+#include "md32_common.h"
+
+#if 0
+#define F1(x,y,z) ((x)^(y)^(z))
+#define F2(x,y,z) (((x)&(y))|((~x)&z))
+#define F3(x,y,z) (((x)|(~y))^(z))
+#define F4(x,y,z) (((x)&(z))|((y)&(~(z))))
+#define F5(x,y,z) ((x)^((y)|(~(z))))
+#else
+/*
+ * Transformed F2 and F4 are courtesy of Wei Dai <weidai@eskimo.com>
+ */
+#define F1(x,y,z) ((x) ^ (y) ^ (z))
+#define F2(x,y,z) ((((y) ^ (z)) & (x)) ^ (z))
+#define F3(x,y,z) (((~(y)) | (x)) ^ (z))
+#define F4(x,y,z) ((((x) ^ (y)) & (z)) ^ (y))
+#define F5(x,y,z) (((~(z)) | (y)) ^ (x))
+#endif
+
+#define RIPEMD160_A 0x67452301L
+#define RIPEMD160_B 0xEFCDAB89L
+#define RIPEMD160_C 0x98BADCFEL
+#define RIPEMD160_D 0x10325476L
+#define RIPEMD160_E 0xC3D2E1F0L
+
+#include "rmdconst.h"
+
+#define RIP1(a,b,c,d,e,w,s) { \
+ a+=F1(b,c,d)+X(w); \
+ a=ROTATE(a,s)+e; \
+ c=ROTATE(c,10); }
+
+#define RIP2(a,b,c,d,e,w,s,K) { \
+ a+=F2(b,c,d)+X(w)+K; \
+ a=ROTATE(a,s)+e; \
+ c=ROTATE(c,10); }
+
+#define RIP3(a,b,c,d,e,w,s,K) { \
+ a+=F3(b,c,d)+X(w)+K; \
+ a=ROTATE(a,s)+e; \
+ c=ROTATE(c,10); }
+
+#define RIP4(a,b,c,d,e,w,s,K) { \
+ a+=F4(b,c,d)+X(w)+K; \
+ a=ROTATE(a,s)+e; \
+ c=ROTATE(c,10); }
+
+#define RIP5(a,b,c,d,e,w,s,K) { \
+ a+=F5(b,c,d)+X(w)+K; \
+ a=ROTATE(a,s)+e; \
+ c=ROTATE(c,10); }
+
diff --git a/bitmask_android/openssl/crypto/ripemd/rmd_one.c b/bitmask_android/openssl/crypto/ripemd/rmd_one.c
new file mode 100644
index 00000000..3efb1375
--- /dev/null
+++ b/bitmask_android/openssl/crypto/ripemd/rmd_one.c
@@ -0,0 +1,78 @@
+/* crypto/ripemd/rmd_one.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to. The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code. The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * "This product includes cryptographic software written by
+ * Eric Young (eay@cryptsoft.com)"
+ * The word 'cryptographic' can be left out if the rouines from the library
+ * being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ * the apps directory (application code) you must include an acknowledgement:
+ * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed. i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <openssl/ripemd.h>
+#include <openssl/crypto.h>
+
+unsigned char *RIPEMD160(const unsigned char *d, size_t n,
+ unsigned char *md)
+ {
+ RIPEMD160_CTX c;
+ static unsigned char m[RIPEMD160_DIGEST_LENGTH];
+
+ if (md == NULL) md=m;
+ if (!RIPEMD160_Init(&c))
+ return NULL;
+ RIPEMD160_Update(&c,d,n);
+ RIPEMD160_Final(md,&c);
+ OPENSSL_cleanse(&c,sizeof(c)); /* security consideration */
+ return(md);
+ }
+
diff --git a/bitmask_android/openssl/crypto/ripemd/rmdconst.h b/bitmask_android/openssl/crypto/ripemd/rmdconst.h
new file mode 100644
index 00000000..59c48dea
--- /dev/null
+++ b/bitmask_android/openssl/crypto/ripemd/rmdconst.h
@@ -0,0 +1,399 @@
+/* crypto/ripemd/rmdconst.h */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to. The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code. The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * "This product includes cryptographic software written by
+ * Eric Young (eay@cryptsoft.com)"
+ * The word 'cryptographic' can be left out if the rouines from the library
+ * being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ * the apps directory (application code) you must include an acknowledgement:
+ * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed. i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+#define KL0 0x00000000L
+#define KL1 0x5A827999L
+#define KL2 0x6ED9EBA1L
+#define KL3 0x8F1BBCDCL
+#define KL4 0xA953FD4EL
+
+#define KR0 0x50A28BE6L
+#define KR1 0x5C4DD124L
+#define KR2 0x6D703EF3L
+#define KR3 0x7A6D76E9L
+#define KR4 0x00000000L
+
+#define WL00 0
+#define SL00 11
+#define WL01 1
+#define SL01 14
+#define WL02 2
+#define SL02 15
+#define WL03 3
+#define SL03 12
+#define WL04 4
+#define SL04 5
+#define WL05 5
+#define SL05 8
+#define WL06 6
+#define SL06 7
+#define WL07 7
+#define SL07 9
+#define WL08 8
+#define SL08 11
+#define WL09 9
+#define SL09 13
+#define WL10 10
+#define SL10 14
+#define WL11 11
+#define SL11 15
+#define WL12 12
+#define SL12 6
+#define WL13 13
+#define SL13 7
+#define WL14 14
+#define SL14 9
+#define WL15 15
+#define SL15 8
+
+#define WL16 7
+#define SL16 7
+#define WL17 4
+#define SL17 6
+#define WL18 13
+#define SL18 8
+#define WL19 1
+#define SL19 13
+#define WL20 10
+#define SL20 11
+#define WL21 6
+#define SL21 9
+#define WL22 15
+#define SL22 7
+#define WL23 3
+#define SL23 15
+#define WL24 12
+#define SL24 7
+#define WL25 0
+#define SL25 12
+#define WL26 9
+#define SL26 15
+#define WL27 5
+#define SL27 9
+#define WL28 2
+#define SL28 11
+#define WL29 14
+#define SL29 7
+#define WL30 11
+#define SL30 13
+#define WL31 8
+#define SL31 12
+
+#define WL32 3
+#define SL32 11
+#define WL33 10
+#define SL33 13
+#define WL34 14
+#define SL34 6
+#define WL35 4
+#define SL35 7
+#define WL36 9
+#define SL36 14
+#define WL37 15
+#define SL37 9
+#define WL38 8
+#define SL38 13
+#define WL39 1
+#define SL39 15
+#define WL40 2
+#define SL40 14
+#define WL41 7
+#define SL41 8
+#define WL42 0
+#define SL42 13
+#define WL43 6
+#define SL43 6
+#define WL44 13
+#define SL44 5
+#define WL45 11
+#define SL45 12
+#define WL46 5
+#define SL46 7
+#define WL47 12
+#define SL47 5
+
+#define WL48 1
+#define SL48 11
+#define WL49 9
+#define SL49 12
+#define WL50 11
+#define SL50 14
+#define WL51 10
+#define SL51 15
+#define WL52 0
+#define SL52 14
+#define WL53 8
+#define SL53 15
+#define WL54 12
+#define SL54 9
+#define WL55 4
+#define SL55 8
+#define WL56 13
+#define SL56 9
+#define WL57 3
+#define SL57 14
+#define WL58 7
+#define SL58 5
+#define WL59 15
+#define SL59 6
+#define WL60 14
+#define SL60 8
+#define WL61 5
+#define SL61 6
+#define WL62 6
+#define SL62 5
+#define WL63 2
+#define SL63 12
+
+#define WL64 4
+#define SL64 9
+#define WL65 0
+#define SL65 15
+#define WL66 5
+#define SL66 5
+#define WL67 9
+#define SL67 11
+#define WL68 7
+#define SL68 6
+#define WL69 12
+#define SL69 8
+#define WL70 2
+#define SL70 13
+#define WL71 10
+#define SL71 12
+#define WL72 14
+#define SL72 5
+#define WL73 1
+#define SL73 12
+#define WL74 3
+#define SL74 13
+#define WL75 8
+#define SL75 14
+#define WL76 11
+#define SL76 11
+#define WL77 6
+#define SL77 8
+#define WL78 15
+#define SL78 5
+#define WL79 13
+#define SL79 6
+
+#define WR00 5
+#define SR00 8
+#define WR01 14
+#define SR01 9
+#define WR02 7
+#define SR02 9
+#define WR03 0
+#define SR03 11
+#define WR04 9
+#define SR04 13
+#define WR05 2
+#define SR05 15
+#define WR06 11
+#define SR06 15
+#define WR07 4
+#define SR07 5
+#define WR08 13
+#define SR08 7
+#define WR09 6
+#define SR09 7
+#define WR10 15
+#define SR10 8
+#define WR11 8
+#define SR11 11
+#define WR12 1
+#define SR12 14
+#define WR13 10
+#define SR13 14
+#define WR14 3
+#define SR14 12
+#define WR15 12
+#define SR15 6
+
+#define WR16 6
+#define SR16 9
+#define WR17 11
+#define SR17 13
+#define WR18 3
+#define SR18 15
+#define WR19 7
+#define SR19 7
+#define WR20 0
+#define SR20 12
+#define WR21 13
+#define SR21 8
+#define WR22 5
+#define SR22 9
+#define WR23 10
+#define SR23 11
+#define WR24 14
+#define SR24 7
+#define WR25 15
+#define SR25 7
+#define WR26 8
+#define SR26 12
+#define WR27 12
+#define SR27 7
+#define WR28 4
+#define SR28 6
+#define WR29 9
+#define SR29 15
+#define WR30 1
+#define SR30 13
+#define WR31 2
+#define SR31 11
+
+#define WR32 15
+#define SR32 9
+#define WR33 5
+#define SR33 7
+#define WR34 1
+#define SR34 15
+#define WR35 3
+#define SR35 11
+#define WR36 7
+#define SR36 8
+#define WR37 14
+#define SR37 6
+#define WR38 6
+#define SR38 6
+#define WR39 9
+#define SR39 14
+#define WR40 11
+#define SR40 12
+#define WR41 8
+#define SR41 13
+#define WR42 12
+#define SR42 5
+#define WR43 2
+#define SR43 14
+#define WR44 10
+#define SR44 13
+#define WR45 0
+#define SR45 13
+#define WR46 4
+#define SR46 7
+#define WR47 13
+#define SR47 5
+
+#define WR48 8
+#define SR48 15
+#define WR49 6
+#define SR49 5
+#define WR50 4
+#define SR50 8
+#define WR51 1
+#define SR51 11
+#define WR52 3
+#define SR52 14
+#define WR53 11
+#define SR53 14
+#define WR54 15
+#define SR54 6
+#define WR55 0
+#define SR55 14
+#define WR56 5
+#define SR56 6
+#define WR57 12
+#define SR57 9
+#define WR58 2
+#define SR58 12
+#define WR59 13
+#define SR59 9
+#define WR60 9
+#define SR60 12
+#define WR61 7
+#define SR61 5
+#define WR62 10
+#define SR62 15
+#define WR63 14
+#define SR63 8
+
+#define WR64 12
+#define SR64 8
+#define WR65 15
+#define SR65 5
+#define WR66 10
+#define SR66 12
+#define WR67 4
+#define SR67 9
+#define WR68 1
+#define SR68 12
+#define WR69 5
+#define SR69 5
+#define WR70 8
+#define SR70 14
+#define WR71 7
+#define SR71 6
+#define WR72 6
+#define SR72 8
+#define WR73 2
+#define SR73 13
+#define WR74 13
+#define SR74 6
+#define WR75 14
+#define SR75 5
+#define WR76 0
+#define SR76 15
+#define WR77 3
+#define SR77 13
+#define WR78 9
+#define SR78 11
+#define WR79 11
+#define SR79 11
+
diff --git a/bitmask_android/openssl/crypto/ripemd/rmdtest.c b/bitmask_android/openssl/crypto/ripemd/rmdtest.c
new file mode 100644
index 00000000..fb34e0e8
--- /dev/null
+++ b/bitmask_android/openssl/crypto/ripemd/rmdtest.c
@@ -0,0 +1,145 @@
+/* crypto/ripemd/rmdtest.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to. The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code. The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * "This product includes cryptographic software written by
+ * Eric Young (eay@cryptsoft.com)"
+ * The word 'cryptographic' can be left out if the rouines from the library
+ * being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ * the apps directory (application code) you must include an acknowledgement:
+ * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed. i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+
+#include "../e_os.h"
+
+#ifdef OPENSSL_NO_RIPEMD
+int main(int argc, char *argv[])
+{
+ printf("No ripemd support\n");
+ return(0);
+}
+#else
+#include <openssl/ripemd.h>
+#include <openssl/evp.h>
+
+#ifdef CHARSET_EBCDIC
+#include <openssl/ebcdic.h>
+#endif
+
+static char *test[]={
+ "",
+ "a",
+ "abc",
+ "message digest",
+ "abcdefghijklmnopqrstuvwxyz",
+ "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq",
+ "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789",
+ "12345678901234567890123456789012345678901234567890123456789012345678901234567890",
+ NULL,
+ };
+
+static char *ret[]={
+ "9c1185a5c5e9fc54612808977ee8f548b2258d31",
+ "0bdc9d2d256b3ee9daae347be6f4dc835a467ffe",
+ "8eb208f7e05d987a9b044a8e98c6b087f15a0bfc",
+ "5d0689ef49d2fae572b881b123a85ffa21595f36",
+ "f71c27109c692c1b56bbdceb5b9d2865b3708dbc",
+ "12a053384a9c0c88e405a06c27dcf49ada62eb2b",
+ "b0e20b6e3116640286ed3a87a5713079b21f5189",
+ "9b752e45573d4b39f4dbd3323cab82bf63326bfb",
+ };
+
+static char *pt(unsigned char *md);
+int main(int argc, char *argv[])
+ {
+ int i,err=0;
+ char **P,**R;
+ char *p;
+ unsigned char md[RIPEMD160_DIGEST_LENGTH];
+
+ P=test;
+ R=ret;
+ i=1;
+ while (*P != NULL)
+ {
+#ifdef CHARSET_EBCDIC
+ ebcdic2ascii((char *)*P, (char *)*P, strlen((char *)*P));
+#endif
+ EVP_Digest(&(P[0][0]),strlen((char *)*P),md,NULL,EVP_ripemd160(), NULL);
+ p=pt(md);
+ if (strcmp(p,(char *)*R) != 0)
+ {
+ printf("error calculating RIPEMD160 on '%s'\n",*P);
+ printf("got %s instead of %s\n",p,*R);
+ err++;
+ }
+ else
+ printf("test %d ok\n",i);
+ i++;
+ R++;
+ P++;
+ }
+ EXIT(err);
+ return(0);
+ }
+
+static char *pt(unsigned char *md)
+ {
+ int i;
+ static char buf[80];
+
+ for (i=0; i<RIPEMD160_DIGEST_LENGTH; i++)
+ sprintf(&(buf[i*2]),"%02x",md[i]);
+ return(buf);
+ }
+#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 06:40:10 +0000