diff options
Diffstat (limited to 'app/openssl/crypto/sha')
35 files changed, 11399 insertions, 0 deletions
diff --git a/app/openssl/crypto/sha/asm/README b/app/openssl/crypto/sha/asm/README new file mode 100644 index 00000000..b7e75576 --- /dev/null +++ b/app/openssl/crypto/sha/asm/README @@ -0,0 +1 @@ +C2.pl works diff --git a/app/openssl/crypto/sha/asm/sha1-586.pl b/app/openssl/crypto/sha/asm/sha1-586.pl new file mode 100644 index 00000000..a1f87628 --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha1-586.pl @@ -0,0 +1,220 @@ +#!/usr/bin/env perl + +# ==================================================================== +# [Re]written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# "[Re]written" was achieved in two major overhauls. In 2004 BODY_* +# functions were re-implemented to address P4 performance issue [see +# commentary below], and in 2006 the rest was rewritten in order to +# gain freedom to liberate licensing terms. + +# It was noted that Intel IA-32 C compiler generates code which +# performs ~30% *faster* on P4 CPU than original *hand-coded* +# SHA1 assembler implementation. To address this problem (and +# prove that humans are still better than machines:-), the +# original code was overhauled, which resulted in following +# performance changes: +# +# compared with original compared with Intel cc +# assembler impl. generated code +# Pentium -16% +48% +# PIII/AMD +8% +16% +# P4 +85%(!) +45% +# +# As you can see Pentium came out as looser:-( Yet I reckoned that +# improvement on P4 outweights the loss and incorporate this +# re-tuned code to 0.9.7 and later. +# ---------------------------------------------------------------- +# <appro@fy.chalmers.se> + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +push(@INC,"${dir}","${dir}../../perlasm"); +require "x86asm.pl"; + +&asm_init($ARGV[0],"sha1-586.pl",$ARGV[$#ARGV] eq "386"); + +$A="eax"; +$B="ebx"; +$C="ecx"; +$D="edx"; +$E="edi"; +$T="esi"; +$tmp1="ebp"; + +@V=($A,$B,$C,$D,$E,$T); + +sub BODY_00_15 + { + local($n,$a,$b,$c,$d,$e,$f)=@_; + + &comment("00_15 $n"); + + &mov($f,$c); # f to hold F_00_19(b,c,d) + if ($n==0) { &mov($tmp1,$a); } + else { &mov($a,$tmp1); } + &rotl($tmp1,5); # tmp1=ROTATE(a,5) + &xor($f,$d); + &add($tmp1,$e); # tmp1+=e; + &and($f,$b); + &mov($e,&swtmp($n%16)); # e becomes volatile and is loaded + # with xi, also note that e becomes + # f in next round... + &xor($f,$d); # f holds F_00_19(b,c,d) + &rotr($b,2); # b=ROTATE(b,30) + &lea($tmp1,&DWP(0x5a827999,$tmp1,$e)); # tmp1+=K_00_19+xi + + if ($n==15) { &add($f,$tmp1); } # f+=tmp1 + else { &add($tmp1,$f); } # f becomes a in next round + } + +sub BODY_16_19 + { + local($n,$a,$b,$c,$d,$e,$f)=@_; + + &comment("16_19 $n"); + + &mov($f,&swtmp($n%16)); # f to hold Xupdate(xi,xa,xb,xc,xd) + &mov($tmp1,$c); # tmp1 to hold F_00_19(b,c,d) + &xor($f,&swtmp(($n+2)%16)); + &xor($tmp1,$d); + &xor($f,&swtmp(($n+8)%16)); + &and($tmp1,$b); # tmp1 holds F_00_19(b,c,d) + &rotr($b,2); # b=ROTATE(b,30) + &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd + &rotl($f,1); # f=ROTATE(f,1) + &xor($tmp1,$d); # tmp1=F_00_19(b,c,d) + &mov(&swtmp($n%16),$f); # xi=f + &lea($f,&DWP(0x5a827999,$f,$e));# f+=K_00_19+e + &mov($e,$a); # e becomes volatile + &rotl($e,5); # e=ROTATE(a,5) + &add($f,$tmp1); # f+=F_00_19(b,c,d) + &add($f,$e); # f+=ROTATE(a,5) + } + +sub BODY_20_39 + { + local($n,$a,$b,$c,$d,$e,$f)=@_; + local $K=($n<40)?0x6ed9eba1:0xca62c1d6; + + &comment("20_39 $n"); + + &mov($tmp1,$b); # tmp1 to hold F_20_39(b,c,d) + &mov($f,&swtmp($n%16)); # f to hold Xupdate(xi,xa,xb,xc,xd) + &rotr($b,2); # b=ROTATE(b,30) + &xor($f,&swtmp(($n+2)%16)); + &xor($tmp1,$c); + &xor($f,&swtmp(($n+8)%16)); + &xor($tmp1,$d); # tmp1 holds F_20_39(b,c,d) + &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd + &rotl($f,1); # f=ROTATE(f,1) + &add($tmp1,$e); + &mov(&swtmp($n%16),$f); # xi=f + &mov($e,$a); # e becomes volatile + &rotl($e,5); # e=ROTATE(a,5) + &lea($f,&DWP($K,$f,$tmp1)); # f+=K_20_39+e + &add($f,$e); # f+=ROTATE(a,5) + } + +sub BODY_40_59 + { + local($n,$a,$b,$c,$d,$e,$f)=@_; + + &comment("40_59 $n"); + + &mov($f,&swtmp($n%16)); # f to hold Xupdate(xi,xa,xb,xc,xd) + &mov($tmp1,&swtmp(($n+2)%16)); + &xor($f,$tmp1); + &mov($tmp1,&swtmp(($n+8)%16)); + &xor($f,$tmp1); + &mov($tmp1,&swtmp(($n+13)%16)); + &xor($f,$tmp1); # f holds xa^xb^xc^xd + &mov($tmp1,$b); # tmp1 to hold F_40_59(b,c,d) + &rotl($f,1); # f=ROTATE(f,1) + &or($tmp1,$c); + &mov(&swtmp($n%16),$f); # xi=f + &and($tmp1,$d); + &lea($f,&DWP(0x8f1bbcdc,$f,$e));# f+=K_40_59+e + &mov($e,$b); # e becomes volatile and is used + # to calculate F_40_59(b,c,d) + &rotr($b,2); # b=ROTATE(b,30) + &and($e,$c); + &or($tmp1,$e); # tmp1 holds F_40_59(b,c,d) + &mov($e,$a); + &rotl($e,5); # e=ROTATE(a,5) + &add($f,$tmp1); # f+=tmp1; + &add($f,$e); # f+=ROTATE(a,5) + } + +&function_begin("sha1_block_data_order"); + &mov($tmp1,&wparam(0)); # SHA_CTX *c + &mov($T,&wparam(1)); # const void *input + &mov($A,&wparam(2)); # size_t num + &stack_push(16); # allocate X[16] + &shl($A,6); + &add($A,$T); + &mov(&wparam(2),$A); # pointer beyond the end of input + &mov($E,&DWP(16,$tmp1));# pre-load E + + &set_label("loop",16); + + # copy input chunk to X, but reversing byte order! + for ($i=0; $i<16; $i+=4) + { + &mov($A,&DWP(4*($i+0),$T)); + &mov($B,&DWP(4*($i+1),$T)); + &mov($C,&DWP(4*($i+2),$T)); + &mov($D,&DWP(4*($i+3),$T)); + &bswap($A); + &bswap($B); + &bswap($C); + &bswap($D); + &mov(&swtmp($i+0),$A); + &mov(&swtmp($i+1),$B); + &mov(&swtmp($i+2),$C); + &mov(&swtmp($i+3),$D); + } + &mov(&wparam(1),$T); # redundant in 1st spin + + &mov($A,&DWP(0,$tmp1)); # load SHA_CTX + &mov($B,&DWP(4,$tmp1)); + &mov($C,&DWP(8,$tmp1)); + &mov($D,&DWP(12,$tmp1)); + # E is pre-loaded + + for($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } + for(;$i<20;$i++) { &BODY_16_19($i,@V); unshift(@V,pop(@V)); } + for(;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } + for(;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } + for(;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } + + (($V[5] eq $D) and ($V[0] eq $E)) or die; # double-check + + &mov($tmp1,&wparam(0)); # re-load SHA_CTX* + &mov($D,&wparam(1)); # D is last "T" and is discarded + + &add($E,&DWP(0,$tmp1)); # E is last "A"... + &add($T,&DWP(4,$tmp1)); + &add($A,&DWP(8,$tmp1)); + &add($B,&DWP(12,$tmp1)); + &add($C,&DWP(16,$tmp1)); + + &mov(&DWP(0,$tmp1),$E); # update SHA_CTX + &add($D,64); # advance input pointer + &mov(&DWP(4,$tmp1),$T); + &cmp($D,&wparam(2)); # have we reached the end yet? + &mov(&DWP(8,$tmp1),$A); + &mov($E,$C); # C is last "E" which needs to be "pre-loaded" + &mov(&DWP(12,$tmp1),$B); + &mov($T,$D); # input pointer + &mov(&DWP(16,$tmp1),$C); + &jb(&label("loop")); + + &stack_pop(16); +&function_end("sha1_block_data_order"); +&asciz("SHA1 block transform for x86, CRYPTOGAMS by <appro\@openssl.org>"); + +&asm_finish(); diff --git a/app/openssl/crypto/sha/asm/sha1-armv4-large.pl b/app/openssl/crypto/sha/asm/sha1-armv4-large.pl new file mode 100644 index 00000000..79e3f613 --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha1-armv4-large.pl @@ -0,0 +1,229 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# sha1_block procedure for ARMv4. +# +# January 2007. + +# Size/performance trade-off +# ==================================================================== +# impl size in bytes comp cycles[*] measured performance +# ==================================================================== +# thumb 304 3212 4420 +# armv4-small 392/+29% 1958/+64% 2250/+96% +# armv4-compact 740/+89% 1552/+26% 1840/+22% +# armv4-large 1420/+92% 1307/+19% 1370/+34%[***] +# full unroll ~5100/+260% ~1260/+4% ~1300/+5% +# ==================================================================== +# thumb = same as 'small' but in Thumb instructions[**] and +# with recurring code in two private functions; +# small = detached Xload/update, loops are folded; +# compact = detached Xload/update, 5x unroll; +# large = interleaved Xload/update, 5x unroll; +# full unroll = interleaved Xload/update, full unroll, estimated[!]; +# +# [*] Manually counted instructions in "grand" loop body. Measured +# performance is affected by prologue and epilogue overhead, +# i-cache availability, branch penalties, etc. +# [**] While each Thumb instruction is twice smaller, they are not as +# diverse as ARM ones: e.g., there are only two arithmetic +# instructions with 3 arguments, no [fixed] rotate, addressing +# modes are limited. As result it takes more instructions to do +# the same job in Thumb, therefore the code is never twice as +# small and always slower. +# [***] which is also ~35% better than compiler generated code. Dual- +# issue Cortex A8 core was measured to process input block in +# ~990 cycles. + +# August 2010. +# +# Rescheduling for dual-issue pipeline resulted in 13% improvement on +# Cortex A8 core and in absolute terms ~870 cycles per input block +# [or 13.6 cycles per byte]. + + +while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {} +open STDOUT,">$output"; + +$ctx="r0"; +$inp="r1"; +$len="r2"; +$a="r3"; +$b="r4"; +$c="r5"; +$d="r6"; +$e="r7"; +$K="r8"; +$t0="r9"; +$t1="r10"; +$t2="r11"; +$t3="r12"; +$Xi="r14"; +@V=($a,$b,$c,$d,$e); + +sub Xupdate { +my ($a,$b,$c,$d,$e,$opt1,$opt2)=@_; +$code.=<<___; + ldr $t0,[$Xi,#15*4] + ldr $t1,[$Xi,#13*4] + ldr $t2,[$Xi,#7*4] + add $e,$K,$e,ror#2 @ E+=K_xx_xx + ldr $t3,[$Xi,#2*4] + eor $t0,$t0,$t1 + eor $t2,$t2,$t3 + eor $t1,$c,$d @ F_xx_xx + mov $t0,$t0,ror#31 + add $e,$e,$a,ror#27 @ E+=ROR(A,27) + eor $t0,$t0,$t2,ror#31 + $opt1 @ F_xx_xx + $opt2 @ F_xx_xx + add $e,$e,$t0 @ E+=X[i] + str $t0,[$Xi,#-4]! +___ +} + +sub BODY_00_15 { +my ($a,$b,$c,$d,$e)=@_; +$code.=<<___; + ldrb $t0,[$inp],#4 + ldrb $t1,[$inp,#-1] + ldrb $t2,[$inp,#-2] + add $e,$K,$e,ror#2 @ E+=K_00_19 + ldrb $t3,[$inp,#-3] + add $e,$e,$a,ror#27 @ E+=ROR(A,27) + orr $t0,$t1,$t0,lsl#24 + eor $t1,$c,$d @ F_xx_xx + orr $t0,$t0,$t2,lsl#8 + orr $t0,$t0,$t3,lsl#16 + and $t1,$b,$t1,ror#2 + add $e,$e,$t0 @ E+=X[i] + eor $t1,$t1,$d,ror#2 @ F_00_19(B,C,D) + str $t0,[$Xi,#-4]! + add $e,$e,$t1 @ E+=F_00_19(B,C,D) +___ +} + +sub BODY_16_19 { +my ($a,$b,$c,$d,$e)=@_; + &Xupdate(@_,"and $t1,$b,$t1,ror#2"); +$code.=<<___; + eor $t1,$t1,$d,ror#2 @ F_00_19(B,C,D) + add $e,$e,$t1 @ E+=F_00_19(B,C,D) +___ +} + +sub BODY_20_39 { +my ($a,$b,$c,$d,$e)=@_; + &Xupdate(@_,"eor $t1,$b,$t1,ror#2"); +$code.=<<___; + add $e,$e,$t1 @ E+=F_20_39(B,C,D) +___ +} + +sub BODY_40_59 { +my ($a,$b,$c,$d,$e)=@_; + &Xupdate(@_,"and $t1,$b,$t1,ror#2","and $t2,$c,$d"); +$code.=<<___; + add $e,$e,$t1 @ E+=F_40_59(B,C,D) + add $e,$e,$t2,ror#2 +___ +} + +$code=<<___; +.text + +.global sha1_block_data_order +.type sha1_block_data_order,%function + +.align 2 +sha1_block_data_order: + stmdb sp!,{r4-r12,lr} + add $len,$inp,$len,lsl#6 @ $len to point at the end of $inp + ldmia $ctx,{$a,$b,$c,$d,$e} +.Lloop: + ldr $K,.LK_00_19 + mov $Xi,sp + sub sp,sp,#15*4 + mov $c,$c,ror#30 + mov $d,$d,ror#30 + mov $e,$e,ror#30 @ [6] +.L_00_15: +___ +for($i=0;$i<5;$i++) { + &BODY_00_15(@V); unshift(@V,pop(@V)); +} +$code.=<<___; + teq $Xi,sp + bne .L_00_15 @ [((11+4)*5+2)*3] + sub sp,sp,#5*4 +___ + &BODY_00_15(@V); unshift(@V,pop(@V)); + &BODY_16_19(@V); unshift(@V,pop(@V)); + &BODY_16_19(@V); unshift(@V,pop(@V)); + &BODY_16_19(@V); unshift(@V,pop(@V)); + &BODY_16_19(@V); unshift(@V,pop(@V)); +$code.=<<___; + + ldr $K,.LK_20_39 @ [+15+16*4] + sub sp,sp,#20*4 + cmn sp,#0 @ [+3], clear carry to denote 20_39 +.L_20_39_or_60_79: +___ +for($i=0;$i<5;$i++) { + &BODY_20_39(@V); unshift(@V,pop(@V)); +} +$code.=<<___; + teq $Xi,sp @ preserve carry + bne .L_20_39_or_60_79 @ [+((12+3)*5+2)*4] + bcs .L_done @ [+((12+3)*5+2)*4], spare 300 bytes + + ldr $K,.LK_40_59 + sub sp,sp,#20*4 @ [+2] +.L_40_59: +___ +for($i=0;$i<5;$i++) { + &BODY_40_59(@V); unshift(@V,pop(@V)); +} +$code.=<<___; + teq $Xi,sp + bne .L_40_59 @ [+((12+5)*5+2)*4] + + ldr $K,.LK_60_79 + sub sp,sp,#20*4 + cmp sp,#0 @ set carry to denote 60_79 + b .L_20_39_or_60_79 @ [+4], spare 300 bytes +.L_done: + add sp,sp,#80*4 @ "deallocate" stack frame + ldmia $ctx,{$K,$t0,$t1,$t2,$t3} + add $a,$K,$a + add $b,$t0,$b + add $c,$t1,$c,ror#2 + add $d,$t2,$d,ror#2 + add $e,$t3,$e,ror#2 + stmia $ctx,{$a,$b,$c,$d,$e} + teq $inp,$len + bne .Lloop @ [+18], total 1307 + + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + bx lr @ interoperable with Thumb ISA:-) +.align 2 +.LK_00_19: .word 0x5a827999 +.LK_20_39: .word 0x6ed9eba1 +.LK_40_59: .word 0x8f1bbcdc +.LK_60_79: .word 0xca62c1d6 +.size sha1_block_data_order,.-sha1_block_data_order +.asciz "SHA1 block transform for ARMv4, CRYPTOGAMS by <appro\@openssl.org>" +.align 2 +___ + +$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm; # make it possible to compile with -march=armv4 +print $code; +close STDOUT; # enforce flush diff --git a/app/openssl/crypto/sha/asm/sha1-armv4-large.s b/app/openssl/crypto/sha/asm/sha1-armv4-large.s new file mode 100644 index 00000000..7f687d9f --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha1-armv4-large.s @@ -0,0 +1,387 @@ +.text + +.global sha1_block_data_order +.type sha1_block_data_order,%function + +.align 2 +sha1_block_data_order: + stmdb sp!,{r4-r12,lr} + add r2,r1,r2,lsl#6 @ r2 to point at the end of r1 + ldmia r0,{r3,r4,r5,r6,r7} +.Lloop: + ldr r8,.LK_00_19 + mov r14,sp + sub sp,sp,#15*4 + mov r5,r5,ror#30 + mov r6,r6,ror#30 + mov r7,r7,ror#30 @ [6] +.L_00_15: + ldrb r9,[r1],#4 + ldrb r10,[r1,#-1] + ldrb r11,[r1,#-2] + add r7,r8,r7,ror#2 @ E+=K_00_19 + ldrb r12,[r1,#-3] + add r7,r7,r3,ror#27 @ E+=ROR(A,27) + orr r9,r10,r9,lsl#24 + eor r10,r5,r6 @ F_xx_xx + orr r9,r9,r11,lsl#8 + orr r9,r9,r12,lsl#16 + and r10,r4,r10,ror#2 + add r7,r7,r9 @ E+=X[i] + eor r10,r10,r6,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r7,r7,r10 @ E+=F_00_19(B,C,D) + ldrb r9,[r1],#4 + ldrb r10,[r1,#-1] + ldrb r11,[r1,#-2] + add r6,r8,r6,ror#2 @ E+=K_00_19 + ldrb r12,[r1,#-3] + add r6,r6,r7,ror#27 @ E+=ROR(A,27) + orr r9,r10,r9,lsl#24 + eor r10,r4,r5 @ F_xx_xx + orr r9,r9,r11,lsl#8 + orr r9,r9,r12,lsl#16 + and r10,r3,r10,ror#2 + add r6,r6,r9 @ E+=X[i] + eor r10,r10,r5,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r6,r6,r10 @ E+=F_00_19(B,C,D) + ldrb r9,[r1],#4 + ldrb r10,[r1,#-1] + ldrb r11,[r1,#-2] + add r5,r8,r5,ror#2 @ E+=K_00_19 + ldrb r12,[r1,#-3] + add r5,r5,r6,ror#27 @ E+=ROR(A,27) + orr r9,r10,r9,lsl#24 + eor r10,r3,r4 @ F_xx_xx + orr r9,r9,r11,lsl#8 + orr r9,r9,r12,lsl#16 + and r10,r7,r10,ror#2 + add r5,r5,r9 @ E+=X[i] + eor r10,r10,r4,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r5,r5,r10 @ E+=F_00_19(B,C,D) + ldrb r9,[r1],#4 + ldrb r10,[r1,#-1] + ldrb r11,[r1,#-2] + add r4,r8,r4,ror#2 @ E+=K_00_19 + ldrb r12,[r1,#-3] + add r4,r4,r5,ror#27 @ E+=ROR(A,27) + orr r9,r10,r9,lsl#24 + eor r10,r7,r3 @ F_xx_xx + orr r9,r9,r11,lsl#8 + orr r9,r9,r12,lsl#16 + and r10,r6,r10,ror#2 + add r4,r4,r9 @ E+=X[i] + eor r10,r10,r3,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r4,r4,r10 @ E+=F_00_19(B,C,D) + ldrb r9,[r1],#4 + ldrb r10,[r1,#-1] + ldrb r11,[r1,#-2] + add r3,r8,r3,ror#2 @ E+=K_00_19 + ldrb r12,[r1,#-3] + add r3,r3,r4,ror#27 @ E+=ROR(A,27) + orr r9,r10,r9,lsl#24 + eor r10,r6,r7 @ F_xx_xx + orr r9,r9,r11,lsl#8 + orr r9,r9,r12,lsl#16 + and r10,r5,r10,ror#2 + add r3,r3,r9 @ E+=X[i] + eor r10,r10,r7,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r3,r3,r10 @ E+=F_00_19(B,C,D) + teq r14,sp + bne .L_00_15 @ [((11+4)*5+2)*3] + sub sp,sp,#5*4 + ldrb r9,[r1],#4 + ldrb r10,[r1,#-1] + ldrb r11,[r1,#-2] + add r7,r8,r7,ror#2 @ E+=K_00_19 + ldrb r12,[r1,#-3] + add r7,r7,r3,ror#27 @ E+=ROR(A,27) + orr r9,r10,r9,lsl#24 + eor r10,r5,r6 @ F_xx_xx + orr r9,r9,r11,lsl#8 + orr r9,r9,r12,lsl#16 + and r10,r4,r10,ror#2 + add r7,r7,r9 @ E+=X[i] + eor r10,r10,r6,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r7,r7,r10 @ E+=F_00_19(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r6,r8,r6,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r4,r5 @ F_xx_xx + mov r9,r9,ror#31 + add r6,r6,r7,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + and r10,r3,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r6,r6,r9 @ E+=X[i] + str r9,[r14,#-4]! + eor r10,r10,r5,ror#2 @ F_00_19(B,C,D) + add r6,r6,r10 @ E+=F_00_19(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r5,r8,r5,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r3,r4 @ F_xx_xx + mov r9,r9,ror#31 + add r5,r5,r6,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + and r10,r7,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r5,r5,r9 @ E+=X[i] + str r9,[r14,#-4]! + eor r10,r10,r4,ror#2 @ F_00_19(B,C,D) + add r5,r5,r10 @ E+=F_00_19(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r4,r8,r4,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r7,r3 @ F_xx_xx + mov r9,r9,ror#31 + add r4,r4,r5,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + and r10,r6,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r4,r4,r9 @ E+=X[i] + str r9,[r14,#-4]! + eor r10,r10,r3,ror#2 @ F_00_19(B,C,D) + add r4,r4,r10 @ E+=F_00_19(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r3,r8,r3,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r6,r7 @ F_xx_xx + mov r9,r9,ror#31 + add r3,r3,r4,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + and r10,r5,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r3,r3,r9 @ E+=X[i] + str r9,[r14,#-4]! + eor r10,r10,r7,ror#2 @ F_00_19(B,C,D) + add r3,r3,r10 @ E+=F_00_19(B,C,D) + + ldr r8,.LK_20_39 @ [+15+16*4] + sub sp,sp,#20*4 + cmn sp,#0 @ [+3], clear carry to denote 20_39 +.L_20_39_or_60_79: + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r7,r8,r7,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r5,r6 @ F_xx_xx + mov r9,r9,ror#31 + add r7,r7,r3,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + eor r10,r4,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r7,r7,r9 @ E+=X[i] + str r9,[r14,#-4]! + add r7,r7,r10 @ E+=F_20_39(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r6,r8,r6,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r4,r5 @ F_xx_xx + mov r9,r9,ror#31 + add r6,r6,r7,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + eor r10,r3,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r6,r6,r9 @ E+=X[i] + str r9,[r14,#-4]! + add r6,r6,r10 @ E+=F_20_39(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r5,r8,r5,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r3,r4 @ F_xx_xx + mov r9,r9,ror#31 + add r5,r5,r6,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + eor r10,r7,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r5,r5,r9 @ E+=X[i] + str r9,[r14,#-4]! + add r5,r5,r10 @ E+=F_20_39(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r4,r8,r4,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r7,r3 @ F_xx_xx + mov r9,r9,ror#31 + add r4,r4,r5,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + eor r10,r6,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r4,r4,r9 @ E+=X[i] + str r9,[r14,#-4]! + add r4,r4,r10 @ E+=F_20_39(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r3,r8,r3,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r6,r7 @ F_xx_xx + mov r9,r9,ror#31 + add r3,r3,r4,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + eor r10,r5,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r3,r3,r9 @ E+=X[i] + str r9,[r14,#-4]! + add r3,r3,r10 @ E+=F_20_39(B,C,D) + teq r14,sp @ preserve carry + bne .L_20_39_or_60_79 @ [+((12+3)*5+2)*4] + bcs .L_done @ [+((12+3)*5+2)*4], spare 300 bytes + + ldr r8,.LK_40_59 + sub sp,sp,#20*4 @ [+2] +.L_40_59: + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r7,r8,r7,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r5,r6 @ F_xx_xx + mov r9,r9,ror#31 + add r7,r7,r3,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + and r10,r4,r10,ror#2 @ F_xx_xx + and r11,r5,r6 @ F_xx_xx + add r7,r7,r9 @ E+=X[i] + str r9,[r14,#-4]! + add r7,r7,r10 @ E+=F_40_59(B,C,D) + add r7,r7,r11,ror#2 + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r6,r8,r6,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r4,r5 @ F_xx_xx + mov r9,r9,ror#31 + add r6,r6,r7,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + and r10,r3,r10,ror#2 @ F_xx_xx + and r11,r4,r5 @ F_xx_xx + add r6,r6,r9 @ E+=X[i] + str r9,[r14,#-4]! + add r6,r6,r10 @ E+=F_40_59(B,C,D) + add r6,r6,r11,ror#2 + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r5,r8,r5,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r3,r4 @ F_xx_xx + mov r9,r9,ror#31 + add r5,r5,r6,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + and r10,r7,r10,ror#2 @ F_xx_xx + and r11,r3,r4 @ F_xx_xx + add r5,r5,r9 @ E+=X[i] + str r9,[r14,#-4]! + add r5,r5,r10 @ E+=F_40_59(B,C,D) + add r5,r5,r11,ror#2 + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r4,r8,r4,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r7,r3 @ F_xx_xx + mov r9,r9,ror#31 + add r4,r4,r5,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + and r10,r6,r10,ror#2 @ F_xx_xx + and r11,r7,r3 @ F_xx_xx + add r4,r4,r9 @ E+=X[i] + str r9,[r14,#-4]! + add r4,r4,r10 @ E+=F_40_59(B,C,D) + add r4,r4,r11,ror#2 + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r3,r8,r3,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 + eor r10,r6,r7 @ F_xx_xx + mov r9,r9,ror#31 + add r3,r3,r4,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + and r10,r5,r10,ror#2 @ F_xx_xx + and r11,r6,r7 @ F_xx_xx + add r3,r3,r9 @ E+=X[i] + str r9,[r14,#-4]! + add r3,r3,r10 @ E+=F_40_59(B,C,D) + add r3,r3,r11,ror#2 + teq r14,sp + bne .L_40_59 @ [+((12+5)*5+2)*4] + + ldr r8,.LK_60_79 + sub sp,sp,#20*4 + cmp sp,#0 @ set carry to denote 60_79 + b .L_20_39_or_60_79 @ [+4], spare 300 bytes +.L_done: + add sp,sp,#80*4 @ "deallocate" stack frame + ldmia r0,{r8,r9,r10,r11,r12} + add r3,r8,r3 + add r4,r9,r4 + add r5,r10,r5,ror#2 + add r6,r11,r6,ror#2 + add r7,r12,r7,ror#2 + stmia r0,{r3,r4,r5,r6,r7} + teq r1,r2 + bne .Lloop @ [+18], total 1307 + + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +.align 2 +.LK_00_19: .word 0x5a827999 +.LK_20_39: .word 0x6ed9eba1 +.LK_40_59: .word 0x8f1bbcdc +.LK_60_79: .word 0xca62c1d6 +.size sha1_block_data_order,.-sha1_block_data_order +.asciz "SHA1 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>" +.align 2 diff --git a/app/openssl/crypto/sha/asm/sha1-ia64.pl b/app/openssl/crypto/sha/asm/sha1-ia64.pl new file mode 100644 index 00000000..51c4f47e --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha1-ia64.pl @@ -0,0 +1,306 @@ +#!/usr/bin/env perl +# +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== +# +# Eternal question is what's wrong with compiler generated code? The +# trick is that it's possible to reduce the number of shifts required +# to perform rotations by maintaining copy of 32-bit value in upper +# bits of 64-bit register. Just follow mux2 and shrp instructions... +# Performance under big-endian OS such as HP-UX is 179MBps*1GHz, which +# is >50% better than HP C and >2x better than gcc. + +$code=<<___; +.ident \"sha1-ia64.s, version 1.2\" +.ident \"IA-64 ISA artwork by Andy Polyakov <appro\@fy.chalmers.se>\" +.explicit + +___ + + +if ($^O eq "hpux") { + $ADDP="addp4"; + for (@ARGV) { $ADDP="add" if (/[\+DD|\-mlp]64/); } +} else { $ADDP="add"; } +for (@ARGV) { $big_endian=1 if (/\-DB_ENDIAN/); + $big_endian=0 if (/\-DL_ENDIAN/); } +if (!defined($big_endian)) + { $big_endian=(unpack('L',pack('N',1))==1); } + +#$human=1; +if ($human) { # useful for visual code auditing... + ($A,$B,$C,$D,$E,$T) = ("A","B","C","D","E","T"); + ($h0,$h1,$h2,$h3,$h4) = ("h0","h1","h2","h3","h4"); + ($K_00_19, $K_20_39, $K_40_59, $K_60_79) = + ( "K_00_19","K_20_39","K_40_59","K_60_79" ); + @X= ( "X0", "X1", "X2", "X3", "X4", "X5", "X6", "X7", + "X8", "X9","X10","X11","X12","X13","X14","X15" ); +} +else { + ($A,$B,$C,$D,$E,$T) = ("loc0","loc1","loc2","loc3","loc4","loc5"); + ($h0,$h1,$h2,$h3,$h4) = ("loc6","loc7","loc8","loc9","loc10"); + ($K_00_19, $K_20_39, $K_40_59, $K_60_79) = + ( "r14", "r15", "loc11", "loc12" ); + @X= ( "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", + "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31" ); +} + +sub BODY_00_15 { +local *code=shift; +local ($i,$a,$b,$c,$d,$e,$f)=@_; + +$code.=<<___ if ($i==0); +{ .mmi; ld1 $X[$i&0xf]=[inp],2 // MSB + ld1 tmp2=[tmp3],2 };; +{ .mmi; ld1 tmp0=[inp],2 + ld1 tmp4=[tmp3],2 // LSB + dep $X[$i&0xf]=$X[$i&0xf],tmp2,8,8 };; +___ +if ($i<15) { + $code.=<<___; +{ .mmi; ld1 $X[($i+1)&0xf]=[inp],2 // +1 + dep tmp1=tmp0,tmp4,8,8 };; +{ .mmi; ld1 tmp2=[tmp3],2 // +1 + and tmp4=$c,$b + dep $X[$i&0xf]=$X[$i&0xf],tmp1,16,16 } //;; +{ .mmi; andcm tmp1=$d,$b + add tmp0=$e,$K_00_19 + dep.z tmp5=$a,5,27 };; // a<<5 +{ .mmi; or tmp4=tmp4,tmp1 // F_00_19(b,c,d)=(b&c)|(~b&d) + add $f=tmp0,$X[$i&0xf] // f=xi+e+K_00_19 + extr.u tmp1=$a,27,5 };; // a>>27 +{ .mmi; ld1 tmp0=[inp],2 // +1 + add $f=$f,tmp4 // f+=F_00_19(b,c,d) + shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30) +{ .mmi; ld1 tmp4=[tmp3],2 // +1 + or tmp5=tmp1,tmp5 // ROTATE(a,5) + mux2 tmp6=$a,0x44 };; // see b in next iteration +{ .mii; add $f=$f,tmp5 // f+=ROTATE(a,5) + dep $X[($i+1)&0xf]=$X[($i+1)&0xf],tmp2,8,8 // +1 + mux2 $X[$i&0xf]=$X[$i&0xf],0x44 } //;; + +___ + } +else { + $code.=<<___; +{ .mii; and tmp3=$c,$b + dep tmp1=tmp0,tmp4,8,8;; + dep $X[$i&0xf]=$X[$i&0xf],tmp1,16,16 } //;; +{ .mmi; andcm tmp1=$d,$b + add tmp0=$e,$K_00_19 + dep.z tmp5=$a,5,27 };; // a<<5 +{ .mmi; or tmp4=tmp3,tmp1 // F_00_19(b,c,d)=(b&c)|(~b&d) + add $f=tmp0,$X[$i&0xf] // f=xi+e+K_00_19 + extr.u tmp1=$a,27,5 } // a>>27 +{ .mmi; xor tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf] // +1 + xor tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf] // +1 + nop.i 0 };; +{ .mmi; add $f=$f,tmp4 // f+=F_00_19(b,c,d) + xor tmp2=tmp2,tmp3 // +1 + shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30) +{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5) + mux2 tmp6=$a,0x44 };; // see b in next iteration +{ .mii; add $f=$f,tmp1 // f+=ROTATE(a,5) + shrp $e=tmp2,tmp2,31 // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1) + mux2 $X[$i&0xf]=$X[$i&0xf],0x44 };; + +___ + } +} + +sub BODY_16_19 { +local *code=shift; +local ($i,$a,$b,$c,$d,$e,$f)=@_; + +$code.=<<___; +{ .mmi; mov $X[$i&0xf]=$f // Xupdate + and tmp0=$c,$b + dep.z tmp5=$a,5,27 } // a<<5 +{ .mmi; andcm tmp1=$d,$b + add tmp4=$e,$K_00_19 };; +{ .mmi; or tmp0=tmp0,tmp1 // F_00_19(b,c,d)=(b&c)|(~b&d) + add $f=$f,tmp4 // f+=e+K_00_19 + extr.u tmp1=$a,27,5 } // a>>27 +{ .mmi; xor tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf] // +1 + xor tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf] // +1 + nop.i 0 };; +{ .mmi; add $f=$f,tmp0 // f+=F_00_19(b,c,d) + xor tmp2=tmp2,tmp3 // +1 + shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30) +{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5) + mux2 tmp6=$a,0x44 };; // see b in next iteration +{ .mii; add $f=$f,tmp1 // f+=ROTATE(a,5) + shrp $e=tmp2,tmp2,31 // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1) + nop.i 0 };; + +___ +} + +sub BODY_20_39 { +local *code=shift; +local ($i,$a,$b,$c,$d,$e,$f,$Konst)=@_; + $Konst = $K_20_39 if (!defined($Konst)); + +if ($i<79) { +$code.=<<___; +{ .mib; mov $X[$i&0xf]=$f // Xupdate + dep.z tmp5=$a,5,27 } // a<<5 +{ .mib; xor tmp0=$c,$b + add tmp4=$e,$Konst };; +{ .mmi; xor tmp0=tmp0,$d // F_20_39(b,c,d)=b^c^d + add $f=$f,tmp4 // f+=e+K_20_39 + extr.u tmp1=$a,27,5 } // a>>27 +{ .mmi; xor tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf] // +1 + xor tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf] // +1 + nop.i 0 };; +{ .mmi; add $f=$f,tmp0 // f+=F_20_39(b,c,d) + xor tmp2=tmp2,tmp3 // +1 + shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30) +{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5) + mux2 tmp6=$a,0x44 };; // see b in next iteration +{ .mii; add $f=$f,tmp1 // f+=ROTATE(a,5) + shrp $e=tmp2,tmp2,31 // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1) + nop.i 0 };; + +___ +} +else { +$code.=<<___; +{ .mib; mov $X[$i&0xf]=$f // Xupdate + dep.z tmp5=$a,5,27 } // a<<5 +{ .mib; xor tmp0=$c,$b + add tmp4=$e,$Konst };; +{ .mib; xor tmp0=tmp0,$d // F_20_39(b,c,d)=b^c^d + extr.u tmp1=$a,27,5 } // a>>27 +{ .mib; add $f=$f,tmp4 // f+=e+K_20_39 + add $h1=$h1,$a };; // wrap up +{ .mmi; add $f=$f,tmp0 // f+=F_20_39(b,c,d) + shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30) ;;? +{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5) + add $h3=$h3,$c };; // wrap up +{ .mib; add tmp3=1,inp // used in unaligned codepath + add $f=$f,tmp1 } // f+=ROTATE(a,5) +{ .mib; add $h2=$h2,$b // wrap up + add $h4=$h4,$d };; // wrap up + +___ +} +} + +sub BODY_40_59 { +local *code=shift; +local ($i,$a,$b,$c,$d,$e,$f)=@_; + +$code.=<<___; +{ .mmi; mov $X[$i&0xf]=$f // Xupdate + and tmp0=$c,$b + dep.z tmp5=$a,5,27 } // a<<5 +{ .mmi; and tmp1=$d,$b + add tmp4=$e,$K_40_59 };; +{ .mmi; or tmp0=tmp0,tmp1 // (b&c)|(b&d) + add $f=$f,tmp4 // f+=e+K_40_59 + extr.u tmp1=$a,27,5 } // a>>27 +{ .mmi; and tmp4=$c,$d + xor tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf] // +1 + xor tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf] // +1 + };; +{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5) + xor tmp2=tmp2,tmp3 // +1 + shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30) +{ .mmi; or tmp0=tmp0,tmp4 // F_40_59(b,c,d)=(b&c)|(b&d)|(c&d) + mux2 tmp6=$a,0x44 };; // see b in next iteration +{ .mii; add $f=$f,tmp0 // f+=F_40_59(b,c,d) + shrp $e=tmp2,tmp2,31;; // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1) + add $f=$f,tmp1 };; // f+=ROTATE(a,5) + +___ +} +sub BODY_60_79 { &BODY_20_39(@_,$K_60_79); } + +$code.=<<___; +.text + +tmp0=r8; +tmp1=r9; +tmp2=r10; +tmp3=r11; +ctx=r32; // in0 +inp=r33; // in1 + +// void sha1_block_data_order(SHA_CTX *c,const void *p,size_t num); +.global sha1_block_data_order# +.proc sha1_block_data_order# +.align 32 +sha1_block_data_order: + .prologue +{ .mmi; alloc tmp1=ar.pfs,3,15,0,0 + $ADDP tmp0=4,ctx + .save ar.lc,r3 + mov r3=ar.lc } +{ .mmi; $ADDP ctx=0,ctx + $ADDP inp=0,inp + mov r2=pr };; +tmp4=in2; +tmp5=loc13; +tmp6=loc14; + .body +{ .mlx; ld4 $h0=[ctx],8 + movl $K_00_19=0x5a827999 } +{ .mlx; ld4 $h1=[tmp0],8 + movl $K_20_39=0x6ed9eba1 };; +{ .mlx; ld4 $h2=[ctx],8 + movl $K_40_59=0x8f1bbcdc } +{ .mlx; ld4 $h3=[tmp0] + movl $K_60_79=0xca62c1d6 };; +{ .mmi; ld4 $h4=[ctx],-16 + add in2=-1,in2 // adjust num for ar.lc + mov ar.ec=1 };; +{ .mmi; nop.m 0 + add tmp3=1,inp + mov ar.lc=in2 };; // brp.loop.imp: too far + +.Ldtop: +{ .mmi; mov $A=$h0 + mov $B=$h1 + mux2 tmp6=$h1,0x44 } +{ .mmi; mov $C=$h2 + mov $D=$h3 + mov $E=$h4 };; + +___ + +{ my $i,@V=($A,$B,$C,$D,$E,$T); + + for($i=0;$i<16;$i++) { &BODY_00_15(\$code,$i,@V); unshift(@V,pop(@V)); } + for(;$i<20;$i++) { &BODY_16_19(\$code,$i,@V); unshift(@V,pop(@V)); } + for(;$i<40;$i++) { &BODY_20_39(\$code,$i,@V); unshift(@V,pop(@V)); } + for(;$i<60;$i++) { &BODY_40_59(\$code,$i,@V); unshift(@V,pop(@V)); } + for(;$i<80;$i++) { &BODY_60_79(\$code,$i,@V); unshift(@V,pop(@V)); } + + (($V[5] eq $D) and ($V[0] eq $E)) or die; # double-check +} + +$code.=<<___; +{ .mmb; add $h0=$h0,$E + nop.m 0 + br.ctop.dptk.many .Ldtop };; +.Ldend: +{ .mmi; add tmp0=4,ctx + mov ar.lc=r3 };; +{ .mmi; st4 [ctx]=$h0,8 + st4 [tmp0]=$h1,8 };; +{ .mmi; st4 [ctx]=$h2,8 + st4 [tmp0]=$h3 };; +{ .mib; st4 [ctx]=$h4,-16 + mov pr=r2,0x1ffff + br.ret.sptk.many b0 };; +.endp sha1_block_data_order# +stringz "SHA1 block transform for IA64, CRYPTOGAMS by <appro\@openssl.org>" +___ + +$output=shift and open STDOUT,">$output"; +print $code; diff --git a/app/openssl/crypto/sha/asm/sha1-ppc.pl b/app/openssl/crypto/sha/asm/sha1-ppc.pl new file mode 100755 index 00000000..dcd0fcdf --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha1-ppc.pl @@ -0,0 +1,319 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# I let hardware handle unaligned input(*), except on page boundaries +# (see below for details). Otherwise straightforward implementation +# with X vector in register bank. The module is big-endian [which is +# not big deal as there're no little-endian targets left around]. +# +# (*) this means that this module is inappropriate for PPC403? Does +# anybody know if pre-POWER3 can sustain unaligned load? + +# -m64 -m32 +# ---------------------------------- +# PPC970,gcc-4.0.0 +76% +59% +# Power6,xlc-7 +68% +33% + +$flavour = shift; + +if ($flavour =~ /64/) { + $SIZE_T =8; + $UCMP ="cmpld"; + $STU ="stdu"; + $POP ="ld"; + $PUSH ="std"; +} elsif ($flavour =~ /32/) { + $SIZE_T =4; + $UCMP ="cmplw"; + $STU ="stwu"; + $POP ="lwz"; + $PUSH ="stw"; +} else { die "nonsense $flavour"; } + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or +( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or +die "can't locate ppc-xlate.pl"; + +open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!"; + +$FRAME=24*$SIZE_T; + +$K ="r0"; +$sp ="r1"; +$toc="r2"; +$ctx="r3"; +$inp="r4"; +$num="r5"; +$t0 ="r15"; +$t1 ="r6"; + +$A ="r7"; +$B ="r8"; +$C ="r9"; +$D ="r10"; +$E ="r11"; +$T ="r12"; + +@V=($A,$B,$C,$D,$E,$T); +@X=("r16","r17","r18","r19","r20","r21","r22","r23", + "r24","r25","r26","r27","r28","r29","r30","r31"); + +sub BODY_00_19 { +my ($i,$a,$b,$c,$d,$e,$f)=@_; +my $j=$i+1; +$code.=<<___ if ($i==0); + lwz @X[$i],`$i*4`($inp) +___ +$code.=<<___ if ($i<15); + lwz @X[$j],`$j*4`($inp) + add $f,$K,$e + rotlwi $e,$a,5 + add $f,$f,@X[$i] + and $t0,$c,$b + add $f,$f,$e + andc $t1,$d,$b + rotlwi $b,$b,30 + or $t0,$t0,$t1 + add $f,$f,$t0 +___ +$code.=<<___ if ($i>=15); + add $f,$K,$e + rotlwi $e,$a,5 + xor @X[$j%16],@X[$j%16],@X[($j+2)%16] + add $f,$f,@X[$i%16] + and $t0,$c,$b + xor @X[$j%16],@X[$j%16],@X[($j+8)%16] + add $f,$f,$e + andc $t1,$d,$b + rotlwi $b,$b,30 + or $t0,$t0,$t1 + xor @X[$j%16],@X[$j%16],@X[($j+13)%16] + add $f,$f,$t0 + rotlwi @X[$j%16],@X[$j%16],1 +___ +} + +sub BODY_20_39 { +my ($i,$a,$b,$c,$d,$e,$f)=@_; +my $j=$i+1; +$code.=<<___ if ($i<79); + add $f,$K,$e + rotlwi $e,$a,5 + xor @X[$j%16],@X[$j%16],@X[($j+2)%16] + add $f,$f,@X[$i%16] + xor $t0,$b,$c + xor @X[$j%16],@X[$j%16],@X[($j+8)%16] + add $f,$f,$e + rotlwi $b,$b,30 + xor $t0,$t0,$d + xor @X[$j%16],@X[$j%16],@X[($j+13)%16] + add $f,$f,$t0 + rotlwi @X[$j%16],@X[$j%16],1 +___ +$code.=<<___ if ($i==79); + add $f,$K,$e + rotlwi $e,$a,5 + lwz r16,0($ctx) + add $f,$f,@X[$i%16] + xor $t0,$b,$c + lwz r17,4($ctx) + add $f,$f,$e + rotlwi $b,$b,30 + lwz r18,8($ctx) + xor $t0,$t0,$d + lwz r19,12($ctx) + add $f,$f,$t0 + lwz r20,16($ctx) +___ +} + +sub BODY_40_59 { +my ($i,$a,$b,$c,$d,$e,$f)=@_; +my $j=$i+1; +$code.=<<___; + add $f,$K,$e + rotlwi $e,$a,5 + xor @X[$j%16],@X[$j%16],@X[($j+2)%16] + add $f,$f,@X[$i%16] + and $t0,$b,$c + xor @X[$j%16],@X[$j%16],@X[($j+8)%16] + add $f,$f,$e + or $t1,$b,$c + rotlwi $b,$b,30 + xor @X[$j%16],@X[$j%16],@X[($j+13)%16] + and $t1,$t1,$d + or $t0,$t0,$t1 + rotlwi @X[$j%16],@X[$j%16],1 + add $f,$f,$t0 +___ +} + +$code=<<___; +.machine "any" +.text + +.globl .sha1_block_data_order +.align 4 +.sha1_block_data_order: + mflr r0 + $STU $sp,`-($FRAME+64)`($sp) + $PUSH r0,`$FRAME-$SIZE_T*18`($sp) + $PUSH r15,`$FRAME-$SIZE_T*17`($sp) + $PUSH r16,`$FRAME-$SIZE_T*16`($sp) + $PUSH r17,`$FRAME-$SIZE_T*15`($sp) + $PUSH r18,`$FRAME-$SIZE_T*14`($sp) + $PUSH r19,`$FRAME-$SIZE_T*13`($sp) + $PUSH r20,`$FRAME-$SIZE_T*12`($sp) + $PUSH r21,`$FRAME-$SIZE_T*11`($sp) + $PUSH r22,`$FRAME-$SIZE_T*10`($sp) + $PUSH r23,`$FRAME-$SIZE_T*9`($sp) + $PUSH r24,`$FRAME-$SIZE_T*8`($sp) + $PUSH r25,`$FRAME-$SIZE_T*7`($sp) + $PUSH r26,`$FRAME-$SIZE_T*6`($sp) + $PUSH r27,`$FRAME-$SIZE_T*5`($sp) + $PUSH r28,`$FRAME-$SIZE_T*4`($sp) + $PUSH r29,`$FRAME-$SIZE_T*3`($sp) + $PUSH r30,`$FRAME-$SIZE_T*2`($sp) + $PUSH r31,`$FRAME-$SIZE_T*1`($sp) + lwz $A,0($ctx) + lwz $B,4($ctx) + lwz $C,8($ctx) + lwz $D,12($ctx) + lwz $E,16($ctx) + andi. r0,$inp,3 + bne Lunaligned +Laligned: + mtctr $num + bl Lsha1_block_private +Ldone: + $POP r0,`$FRAME-$SIZE_T*18`($sp) + $POP r15,`$FRAME-$SIZE_T*17`($sp) + $POP r16,`$FRAME-$SIZE_T*16`($sp) + $POP r17,`$FRAME-$SIZE_T*15`($sp) + $POP r18,`$FRAME-$SIZE_T*14`($sp) + $POP r19,`$FRAME-$SIZE_T*13`($sp) + $POP r20,`$FRAME-$SIZE_T*12`($sp) + $POP r21,`$FRAME-$SIZE_T*11`($sp) + $POP r22,`$FRAME-$SIZE_T*10`($sp) + $POP r23,`$FRAME-$SIZE_T*9`($sp) + $POP r24,`$FRAME-$SIZE_T*8`($sp) + $POP r25,`$FRAME-$SIZE_T*7`($sp) + $POP r26,`$FRAME-$SIZE_T*6`($sp) + $POP r27,`$FRAME-$SIZE_T*5`($sp) + $POP r28,`$FRAME-$SIZE_T*4`($sp) + $POP r29,`$FRAME-$SIZE_T*3`($sp) + $POP r30,`$FRAME-$SIZE_T*2`($sp) + $POP r31,`$FRAME-$SIZE_T*1`($sp) + mtlr r0 + addi $sp,$sp,`$FRAME+64` + blr +___ + +# PowerPC specification allows an implementation to be ill-behaved +# upon unaligned access which crosses page boundary. "Better safe +# than sorry" principle makes me treat it specially. But I don't +# look for particular offending word, but rather for 64-byte input +# block which crosses the boundary. Once found that block is aligned +# and hashed separately... +$code.=<<___; +.align 4 +Lunaligned: + subfic $t1,$inp,4096 + andi. $t1,$t1,4095 ; distance to closest page boundary + srwi. $t1,$t1,6 ; t1/=64 + beq Lcross_page + $UCMP $num,$t1 + ble- Laligned ; didn't cross the page boundary + mtctr $t1 + subfc $num,$t1,$num + bl Lsha1_block_private +Lcross_page: + li $t1,16 + mtctr $t1 + addi r20,$sp,$FRAME ; spot below the frame +Lmemcpy: + lbz r16,0($inp) + lbz r17,1($inp) + lbz r18,2($inp) + lbz r19,3($inp) + addi $inp,$inp,4 + stb r16,0(r20) + stb r17,1(r20) + stb r18,2(r20) + stb r19,3(r20) + addi r20,r20,4 + bdnz Lmemcpy + + $PUSH $inp,`$FRAME-$SIZE_T*19`($sp) + li $t1,1 + addi $inp,$sp,$FRAME + mtctr $t1 + bl Lsha1_block_private + $POP $inp,`$FRAME-$SIZE_T*19`($sp) + addic. $num,$num,-1 + bne- Lunaligned + b Ldone +___ + +# This is private block function, which uses tailored calling +# interface, namely upon entry SHA_CTX is pre-loaded to given +# registers and counter register contains amount of chunks to +# digest... +$code.=<<___; +.align 4 +Lsha1_block_private: +___ +$code.=<<___; # load K_00_19 + lis $K,0x5a82 + ori $K,$K,0x7999 +___ +for($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; # load K_20_39 + lis $K,0x6ed9 + ori $K,$K,0xeba1 +___ +for(;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; # load K_40_59 + lis $K,0x8f1b + ori $K,$K,0xbcdc +___ +for(;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; # load K_60_79 + lis $K,0xca62 + ori $K,$K,0xc1d6 +___ +for(;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + add r16,r16,$E + add r17,r17,$T + add r18,r18,$A + add r19,r19,$B + add r20,r20,$C + stw r16,0($ctx) + mr $A,r16 + stw r17,4($ctx) + mr $B,r17 + stw r18,8($ctx) + mr $C,r18 + stw r19,12($ctx) + mr $D,r19 + stw r20,16($ctx) + mr $E,r20 + addi $inp,$inp,`16*4` + bdnz- Lsha1_block_private + blr +___ +$code.=<<___; +.asciz "SHA1 block transform for PPC, CRYPTOGAMS by <appro\@fy.chalmers.se>" +___ + +$code =~ s/\`([^\`]*)\`/eval $1/gem; +print $code; +close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha1-s390x.pl b/app/openssl/crypto/sha/asm/sha1-s390x.pl new file mode 100644 index 00000000..4b178482 --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha1-s390x.pl @@ -0,0 +1,226 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# SHA1 block procedure for s390x. + +# April 2007. +# +# Performance is >30% better than gcc 3.3 generated code. But the real +# twist is that SHA1 hardware support is detected and utilized. In +# which case performance can reach further >4.5x for larger chunks. + +# January 2009. +# +# Optimize Xupdate for amount of memory references and reschedule +# instructions to favour dual-issue z10 pipeline. On z10 hardware is +# "only" ~2.3x faster than software. + +$kimdfunc=1; # magic function code for kimd instruction + +$output=shift; +open STDOUT,">$output"; + +$K_00_39="%r0"; $K=$K_00_39; +$K_40_79="%r1"; +$ctx="%r2"; $prefetch="%r2"; +$inp="%r3"; +$len="%r4"; + +$A="%r5"; +$B="%r6"; +$C="%r7"; +$D="%r8"; +$E="%r9"; @V=($A,$B,$C,$D,$E); +$t0="%r10"; +$t1="%r11"; +@X=("%r12","%r13","%r14"); +$sp="%r15"; + +$frame=160+16*4; + +sub Xupdate { +my $i=shift; + +$code.=<<___ if ($i==15); + lg $prefetch,160($sp) ### Xupdate(16) warm-up + lr $X[0],$X[2] +___ +return if ($i&1); # Xupdate is vectorized and executed every 2nd cycle +$code.=<<___ if ($i<16); + lg $X[0],`$i*4`($inp) ### Xload($i) + rllg $X[1],$X[0],32 +___ +$code.=<<___ if ($i>=16); + xgr $X[0],$prefetch ### Xupdate($i) + lg $prefetch,`160+4*(($i+2)%16)`($sp) + xg $X[0],`160+4*(($i+8)%16)`($sp) + xgr $X[0],$prefetch + rll $X[0],$X[0],1 + rllg $X[1],$X[0],32 + rll $X[1],$X[1],1 + rllg $X[0],$X[1],32 + lr $X[2],$X[1] # feedback +___ +$code.=<<___ if ($i<=70); + stg $X[0],`160+4*($i%16)`($sp) +___ +unshift(@X,pop(@X)); +} + +sub BODY_00_19 { +my ($i,$a,$b,$c,$d,$e)=@_; +my $xi=$X[1]; + + &Xupdate($i); +$code.=<<___; + alr $e,$K ### $i + rll $t1,$a,5 + lr $t0,$d + xr $t0,$c + alr $e,$t1 + nr $t0,$b + alr $e,$xi + xr $t0,$d + rll $b,$b,30 + alr $e,$t0 +___ +} + +sub BODY_20_39 { +my ($i,$a,$b,$c,$d,$e)=@_; +my $xi=$X[1]; + + &Xupdate($i); +$code.=<<___; + alr $e,$K ### $i + rll $t1,$a,5 + lr $t0,$b + alr $e,$t1 + xr $t0,$c + alr $e,$xi + xr $t0,$d + rll $b,$b,30 + alr $e,$t0 +___ +} + +sub BODY_40_59 { +my ($i,$a,$b,$c,$d,$e)=@_; +my $xi=$X[1]; + + &Xupdate($i); +$code.=<<___; + alr $e,$K ### $i + rll $t1,$a,5 + lr $t0,$b + alr $e,$t1 + or $t0,$c + lr $t1,$b + nr $t0,$d + nr $t1,$c + alr $e,$xi + or $t0,$t1 + rll $b,$b,30 + alr $e,$t0 +___ +} + +$code.=<<___; +.text +.align 64 +.type Ktable,\@object +Ktable: .long 0x5a827999,0x6ed9eba1,0x8f1bbcdc,0xca62c1d6 + .skip 48 #.long 0,0,0,0,0,0,0,0,0,0,0,0 +.size Ktable,.-Ktable +.globl sha1_block_data_order +.type sha1_block_data_order,\@function +sha1_block_data_order: +___ +$code.=<<___ if ($kimdfunc); + larl %r1,OPENSSL_s390xcap_P + lg %r0,0(%r1) + tmhl %r0,0x4000 # check for message-security assist + jz .Lsoftware + lghi %r0,0 + la %r1,16($sp) + .long 0xb93e0002 # kimd %r0,%r2 + lg %r0,16($sp) + tmhh %r0,`0x8000>>$kimdfunc` + jz .Lsoftware + lghi %r0,$kimdfunc + lgr %r1,$ctx + lgr %r2,$inp + sllg %r3,$len,6 + .long 0xb93e0002 # kimd %r0,%r2 + brc 1,.-4 # pay attention to "partial completion" + br %r14 +.align 16 +.Lsoftware: +___ +$code.=<<___; + lghi %r1,-$frame + stg $ctx,16($sp) + stmg %r6,%r15,48($sp) + lgr %r0,$sp + la $sp,0(%r1,$sp) + stg %r0,0($sp) + + larl $t0,Ktable + llgf $A,0($ctx) + llgf $B,4($ctx) + llgf $C,8($ctx) + llgf $D,12($ctx) + llgf $E,16($ctx) + + lg $K_00_39,0($t0) + lg $K_40_79,8($t0) + +.Lloop: + rllg $K_00_39,$K_00_39,32 +___ +for ($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + rllg $K_00_39,$K_00_39,32 +___ +for (;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; $K=$K_40_79; + rllg $K_40_79,$K_40_79,32 +___ +for (;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + rllg $K_40_79,$K_40_79,32 +___ +for (;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + + lg $ctx,`$frame+16`($sp) + la $inp,64($inp) + al $A,0($ctx) + al $B,4($ctx) + al $C,8($ctx) + al $D,12($ctx) + al $E,16($ctx) + st $A,0($ctx) + st $B,4($ctx) + st $C,8($ctx) + st $D,12($ctx) + st $E,16($ctx) + brct $len,.Lloop + + lmg %r6,%r15,`$frame+48`($sp) + br %r14 +.size sha1_block_data_order,.-sha1_block_data_order +.string "SHA1 block transform for s390x, CRYPTOGAMS by <appro\@openssl.org>" +.comm OPENSSL_s390xcap_P,8,8 +___ + +$code =~ s/\`([^\`]*)\`/eval $1/gem; + +print $code; +close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha1-sparcv9.pl b/app/openssl/crypto/sha/asm/sha1-sparcv9.pl new file mode 100644 index 00000000..5c161cec --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha1-sparcv9.pl @@ -0,0 +1,284 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# Performance improvement is not really impressive on pre-T1 CPU: +8% +# over Sun C and +25% over gcc [3.3]. While on T1, a.k.a. Niagara, it +# turned to be 40% faster than 64-bit code generated by Sun C 5.8 and +# >2x than 64-bit code generated by gcc 3.4. And there is a gimmick. +# X[16] vector is packed to 8 64-bit registers and as result nothing +# is spilled on stack. In addition input data is loaded in compact +# instruction sequence, thus minimizing the window when the code is +# subject to [inter-thread] cache-thrashing hazard. The goal is to +# ensure scalability on UltraSPARC T1, or rather to avoid decay when +# amount of active threads exceeds the number of physical cores. + +$bits=32; +for (@ARGV) { $bits=64 if (/\-m64/ || /\-xarch\=v9/); } +if ($bits==64) { $bias=2047; $frame=192; } +else { $bias=0; $frame=112; } + +$output=shift; +open STDOUT,">$output"; + +@X=("%o0","%o1","%o2","%o3","%o4","%o5","%g1","%o7"); +$rot1m="%g2"; +$tmp64="%g3"; +$Xi="%g4"; +$A="%l0"; +$B="%l1"; +$C="%l2"; +$D="%l3"; +$E="%l4"; +@V=($A,$B,$C,$D,$E); +$K_00_19="%l5"; +$K_20_39="%l6"; +$K_40_59="%l7"; +$K_60_79="%g5"; +@K=($K_00_19,$K_20_39,$K_40_59,$K_60_79); + +$ctx="%i0"; +$inp="%i1"; +$len="%i2"; +$tmp0="%i3"; +$tmp1="%i4"; +$tmp2="%i5"; + +sub BODY_00_15 { +my ($i,$a,$b,$c,$d,$e)=@_; +my $xi=($i&1)?@X[($i/2)%8]:$Xi; + +$code.=<<___; + sll $a,5,$tmp0 !! $i + add @K[$i/20],$e,$e + srl $a,27,$tmp1 + add $tmp0,$e,$e + and $c,$b,$tmp0 + add $tmp1,$e,$e + sll $b,30,$tmp2 + andn $d,$b,$tmp1 + srl $b,2,$b + or $tmp1,$tmp0,$tmp1 + or $tmp2,$b,$b + add $xi,$e,$e +___ +if ($i&1 && $i<15) { + $code.= + " srlx @X[(($i+1)/2)%8],32,$Xi\n"; +} +$code.=<<___; + add $tmp1,$e,$e +___ +} + +sub Xupdate { +my ($i,$a,$b,$c,$d,$e)=@_; +my $j=$i/2; + +if ($i&1) { +$code.=<<___; + sll $a,5,$tmp0 !! $i + add @K[$i/20],$e,$e + srl $a,27,$tmp1 +___ +} else { +$code.=<<___; + sllx @X[($j+6)%8],32,$Xi ! Xupdate($i) + xor @X[($j+1)%8],@X[$j%8],@X[$j%8] + srlx @X[($j+7)%8],32,$tmp1 + xor @X[($j+4)%8],@X[$j%8],@X[$j%8] + sll $a,5,$tmp0 !! $i + or $tmp1,$Xi,$Xi + add @K[$i/20],$e,$e !! + xor $Xi,@X[$j%8],@X[$j%8] + srlx @X[$j%8],31,$Xi + add @X[$j%8],@X[$j%8],@X[$j%8] + and $Xi,$rot1m,$Xi + andn @X[$j%8],$rot1m,@X[$j%8] + srl $a,27,$tmp1 !! + or $Xi,@X[$j%8],@X[$j%8] +___ +} +} + +sub BODY_16_19 { +my ($i,$a,$b,$c,$d,$e)=@_; + + &Xupdate(@_); + if ($i&1) { + $xi=@X[($i/2)%8]; + } else { + $xi=$Xi; + $code.="\tsrlx @X[($i/2)%8],32,$xi\n"; + } +$code.=<<___; + add $tmp0,$e,$e !! + and $c,$b,$tmp0 + add $tmp1,$e,$e + sll $b,30,$tmp2 + add $xi,$e,$e + andn $d,$b,$tmp1 + srl $b,2,$b + or $tmp1,$tmp0,$tmp1 + or $tmp2,$b,$b + add $tmp1,$e,$e +___ +} + +sub BODY_20_39 { +my ($i,$a,$b,$c,$d,$e)=@_; +my $xi; + &Xupdate(@_); + if ($i&1) { + $xi=@X[($i/2)%8]; + } else { + $xi=$Xi; + $code.="\tsrlx @X[($i/2)%8],32,$xi\n"; + } +$code.=<<___; + add $tmp0,$e,$e !! + xor $c,$b,$tmp0 + add $tmp1,$e,$e + sll $b,30,$tmp2 + xor $d,$tmp0,$tmp1 + srl $b,2,$b + add $tmp1,$e,$e + or $tmp2,$b,$b + add $xi,$e,$e +___ +} + +sub BODY_40_59 { +my ($i,$a,$b,$c,$d,$e)=@_; +my $xi; + &Xupdate(@_); + if ($i&1) { + $xi=@X[($i/2)%8]; + } else { + $xi=$Xi; + $code.="\tsrlx @X[($i/2)%8],32,$xi\n"; + } +$code.=<<___; + add $tmp0,$e,$e !! + and $c,$b,$tmp0 + add $tmp1,$e,$e + sll $b,30,$tmp2 + or $c,$b,$tmp1 + srl $b,2,$b + and $d,$tmp1,$tmp1 + add $xi,$e,$e + or $tmp1,$tmp0,$tmp1 + or $tmp2,$b,$b + add $tmp1,$e,$e +___ +} + +$code.=<<___ if ($bits==64); +.register %g2,#scratch +.register %g3,#scratch +___ +$code.=<<___; +.section ".text",#alloc,#execinstr + +.align 32 +.globl sha1_block_data_order +sha1_block_data_order: + save %sp,-$frame,%sp + sllx $len,6,$len + add $inp,$len,$len + + or %g0,1,$rot1m + sllx $rot1m,32,$rot1m + or $rot1m,1,$rot1m + + ld [$ctx+0],$A + ld [$ctx+4],$B + ld [$ctx+8],$C + ld [$ctx+12],$D + ld [$ctx+16],$E + andn $inp,7,$tmp0 + + sethi %hi(0x5a827999),$K_00_19 + or $K_00_19,%lo(0x5a827999),$K_00_19 + sethi %hi(0x6ed9eba1),$K_20_39 + or $K_20_39,%lo(0x6ed9eba1),$K_20_39 + sethi %hi(0x8f1bbcdc),$K_40_59 + or $K_40_59,%lo(0x8f1bbcdc),$K_40_59 + sethi %hi(0xca62c1d6),$K_60_79 + or $K_60_79,%lo(0xca62c1d6),$K_60_79 + +.Lloop: + ldx [$tmp0+0],@X[0] + ldx [$tmp0+16],@X[2] + ldx [$tmp0+32],@X[4] + ldx [$tmp0+48],@X[6] + and $inp,7,$tmp1 + ldx [$tmp0+8],@X[1] + sll $tmp1,3,$tmp1 + ldx [$tmp0+24],@X[3] + subcc %g0,$tmp1,$tmp2 ! should be 64-$tmp1, but -$tmp1 works too + ldx [$tmp0+40],@X[5] + bz,pt %icc,.Laligned + ldx [$tmp0+56],@X[7] + + sllx @X[0],$tmp1,@X[0] + ldx [$tmp0+64],$tmp64 +___ +for($i=0;$i<7;$i++) +{ $code.=<<___; + srlx @X[$i+1],$tmp2,$Xi + sllx @X[$i+1],$tmp1,@X[$i+1] + or $Xi,@X[$i],@X[$i] +___ +} +$code.=<<___; + srlx $tmp64,$tmp2,$tmp64 + or $tmp64,@X[7],@X[7] +.Laligned: + srlx @X[0],32,$Xi +___ +for ($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } +for (;$i<20;$i++) { &BODY_16_19($i,@V); unshift(@V,pop(@V)); } +for (;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } +for (;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } +for (;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + + ld [$ctx+0],@X[0] + ld [$ctx+4],@X[1] + ld [$ctx+8],@X[2] + ld [$ctx+12],@X[3] + add $inp,64,$inp + ld [$ctx+16],@X[4] + cmp $inp,$len + + add $A,@X[0],$A + st $A,[$ctx+0] + add $B,@X[1],$B + st $B,[$ctx+4] + add $C,@X[2],$C + st $C,[$ctx+8] + add $D,@X[3],$D + st $D,[$ctx+12] + add $E,@X[4],$E + st $E,[$ctx+16] + + bne `$bits==64?"%xcc":"%icc"`,.Lloop + andn $inp,7,$tmp0 + + ret + restore +.type sha1_block_data_order,#function +.size sha1_block_data_order,(.-sha1_block_data_order) +.asciz "SHA1 block transform for SPARCv9, CRYPTOGAMS by <appro\@openssl.org>" +.align 4 +___ + +$code =~ s/\`([^\`]*)\`/eval $1/gem; +print $code; +close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha1-sparcv9a.pl b/app/openssl/crypto/sha/asm/sha1-sparcv9a.pl new file mode 100644 index 00000000..85e8d680 --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha1-sparcv9a.pl @@ -0,0 +1,601 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# January 2009 +# +# Provided that UltraSPARC VIS instructions are pipe-lined(*) and +# pairable(*) with IALU ones, offloading of Xupdate to the UltraSPARC +# Graphic Unit would make it possible to achieve higher instruction- +# level parallelism, ILP, and thus higher performance. It should be +# explicitly noted that ILP is the keyword, and it means that this +# code would be unsuitable for cores like UltraSPARC-Tx. The idea is +# not really novel, Sun had VIS-powered implementation for a while. +# Unlike Sun's implementation this one can process multiple unaligned +# input blocks, and as such works as drop-in replacement for OpenSSL +# sha1_block_data_order. Performance improvement was measured to be +# 40% over pure IALU sha1-sparcv9.pl on UltraSPARC-IIi, but 12% on +# UltraSPARC-III. See below for discussion... +# +# The module does not present direct interest for OpenSSL, because +# it doesn't provide better performance on contemporary SPARCv9 CPUs, +# UltraSPARC-Tx and SPARC64-V[II] to be specific. Those who feel they +# absolutely must score on UltraSPARC-I-IV can simply replace +# crypto/sha/asm/sha1-sparcv9.pl with this module. +# +# (*) "Pipe-lined" means that even if it takes several cycles to +# complete, next instruction using same functional unit [but not +# depending on the result of the current instruction] can start +# execution without having to wait for the unit. "Pairable" +# means that two [or more] independent instructions can be +# issued at the very same time. + +$bits=32; +for (@ARGV) { $bits=64 if (/\-m64/ || /\-xarch\=v9/); } +if ($bits==64) { $bias=2047; $frame=192; } +else { $bias=0; $frame=112; } + +$output=shift; +open STDOUT,">$output"; + +$ctx="%i0"; +$inp="%i1"; +$len="%i2"; +$tmp0="%i3"; +$tmp1="%i4"; +$tmp2="%i5"; +$tmp3="%g5"; + +$base="%g1"; +$align="%g4"; +$Xfer="%o5"; +$nXfer=$tmp3; +$Xi="%o7"; + +$A="%l0"; +$B="%l1"; +$C="%l2"; +$D="%l3"; +$E="%l4"; +@V=($A,$B,$C,$D,$E); + +$Actx="%o0"; +$Bctx="%o1"; +$Cctx="%o2"; +$Dctx="%o3"; +$Ectx="%o4"; + +$fmul="%f32"; +$VK_00_19="%f34"; +$VK_20_39="%f36"; +$VK_40_59="%f38"; +$VK_60_79="%f40"; +@VK=($VK_00_19,$VK_20_39,$VK_40_59,$VK_60_79); +@X=("%f0", "%f1", "%f2", "%f3", "%f4", "%f5", "%f6", "%f7", + "%f8", "%f9","%f10","%f11","%f12","%f13","%f14","%f15","%f16"); + +# This is reference 2x-parallelized VIS-powered Xupdate procedure. It +# covers even K_NN_MM addition... +sub Xupdate { +my ($i)=@_; +my $K=@VK[($i+16)/20]; +my $j=($i+16)%16; + +# [ provided that GSR.alignaddr_offset is 5, $mul contains +# 0x100ULL<<32|0x100 value and K_NN_MM are pre-loaded to +# chosen registers... ] +$code.=<<___; + fxors @X[($j+13)%16],@X[$j],@X[$j] !-1/-1/-1:X[0]^=X[13] + fxors @X[($j+14)%16],@X[$j+1],@X[$j+1]! 0/ 0/ 0:X[1]^=X[14] + fxor @X[($j+2)%16],@X[($j+8)%16],%f18! 1/ 1/ 1:Tmp=X[2,3]^X[8,9] + fxor %f18,@X[$j],@X[$j] ! 2/ 4/ 3:X[0,1]^=X[2,3]^X[8,9] + faligndata @X[$j],@X[$j],%f18 ! 3/ 7/ 5:Tmp=X[0,1]>>>24 + fpadd32 @X[$j],@X[$j],@X[$j] ! 4/ 8/ 6:X[0,1]<<=1 + fmul8ulx16 %f18,$fmul,%f18 ! 5/10/ 7:Tmp>>=7, Tmp&=1 + ![fxors %f15,%f2,%f2] + for %f18,@X[$j],@X[$j] ! 8/14/10:X[0,1]|=Tmp + ![fxors %f0,%f3,%f3] !10/17/12:X[0] dependency + fpadd32 $K,@X[$j],%f20 + std %f20,[$Xfer+`4*$j`] +___ +# The numbers delimited with slash are the earliest possible dispatch +# cycles for given instruction assuming 1 cycle latency for simple VIS +# instructions, such as on UltraSPARC-I&II, 3 cycles latency, such as +# on UltraSPARC-III&IV, and 2 cycles latency(*), respectively. Being +# 2x-parallelized the procedure is "worth" 5, 8.5 or 6 ticks per SHA1 +# round. As [long as] FPU/VIS instructions are perfectly pairable with +# IALU ones, the round timing is defined by the maximum between VIS +# and IALU timings. The latter varies from round to round and averages +# out at 6.25 ticks. This means that USI&II should operate at IALU +# rate, while USIII&IV - at VIS rate. This explains why performance +# improvement varies among processors. Well, given that pure IALU +# sha1-sparcv9.pl module exhibits virtually uniform performance of +# ~9.3 cycles per SHA1 round. Timings mentioned above are theoretical +# lower limits. Real-life performance was measured to be 6.6 cycles +# per SHA1 round on USIIi and 8.3 on USIII. The latter is lower than +# half-round VIS timing, because there are 16 Xupdate-free rounds, +# which "push down" average theoretical timing to 8 cycles... + +# (*) SPARC64-V[II] was originally believed to have 2 cycles VIS +# latency. Well, it might have, but it doesn't have dedicated +# VIS-unit. Instead, VIS instructions are executed by other +# functional units, ones used here - by IALU. This doesn't +# improve effective ILP... +} + +# The reference Xupdate procedure is then "strained" over *pairs* of +# BODY_NN_MM and kind of modulo-scheduled in respect to X[n]^=X[n+13] +# and K_NN_MM addition. It's "running" 15 rounds ahead, which leaves +# plenty of room to amortize for read-after-write hazard, as well as +# to fetch and align input for the next spin. The VIS instructions are +# scheduled for latency of 2 cycles, because there are not enough IALU +# instructions to schedule for latency of 3, while scheduling for 1 +# would give no gain on USI&II anyway. + +sub BODY_00_19 { +my ($i,$a,$b,$c,$d,$e)=@_; +my $j=$i&~1; +my $k=($j+16+2)%16; # ahead reference +my $l=($j+16-2)%16; # behind reference +my $K=@VK[($j+16-2)/20]; + +$j=($j+16)%16; + +$code.=<<___ if (!($i&1)); + sll $a,5,$tmp0 !! $i + and $c,$b,$tmp3 + ld [$Xfer+`4*($i%16)`],$Xi + fxors @X[($j+14)%16],@X[$j+1],@X[$j+1]! 0/ 0/ 0:X[1]^=X[14] + srl $a,27,$tmp1 + add $tmp0,$e,$e + fxor @X[($j+2)%16],@X[($j+8)%16],%f18! 1/ 1/ 1:Tmp=X[2,3]^X[8,9] + sll $b,30,$tmp2 + add $tmp1,$e,$e + andn $d,$b,$tmp1 + add $Xi,$e,$e + fxor %f18,@X[$j],@X[$j] ! 2/ 4/ 3:X[0,1]^=X[2,3]^X[8,9] + srl $b,2,$b + or $tmp1,$tmp3,$tmp1 + or $tmp2,$b,$b + add $tmp1,$e,$e + faligndata @X[$j],@X[$j],%f18 ! 3/ 7/ 5:Tmp=X[0,1]>>>24 +___ +$code.=<<___ if ($i&1); + sll $a,5,$tmp0 !! $i + and $c,$b,$tmp3 + ld [$Xfer+`4*($i%16)`],$Xi + fpadd32 @X[$j],@X[$j],@X[$j] ! 4/ 8/ 6:X[0,1]<<=1 + srl $a,27,$tmp1 + add $tmp0,$e,$e + fmul8ulx16 %f18,$fmul,%f18 ! 5/10/ 7:Tmp>>=7, Tmp&=1 + sll $b,30,$tmp2 + add $tmp1,$e,$e + fpadd32 $K,@X[$l],%f20 ! + andn $d,$b,$tmp1 + add $Xi,$e,$e + fxors @X[($k+13)%16],@X[$k],@X[$k] !-1/-1/-1:X[0]^=X[13] + srl $b,2,$b + or $tmp1,$tmp3,$tmp1 + fxor %f18,@X[$j],@X[$j] ! 8/14/10:X[0,1]|=Tmp + or $tmp2,$b,$b + add $tmp1,$e,$e +___ +$code.=<<___ if ($i&1 && $i>=2); + std %f20,[$Xfer+`4*$l`] ! +___ +} + +sub BODY_20_39 { +my ($i,$a,$b,$c,$d,$e)=@_; +my $j=$i&~1; +my $k=($j+16+2)%16; # ahead reference +my $l=($j+16-2)%16; # behind reference +my $K=@VK[($j+16-2)/20]; + +$j=($j+16)%16; + +$code.=<<___ if (!($i&1) && $i<64); + sll $a,5,$tmp0 !! $i + ld [$Xfer+`4*($i%16)`],$Xi + fxors @X[($j+14)%16],@X[$j+1],@X[$j+1]! 0/ 0/ 0:X[1]^=X[14] + srl $a,27,$tmp1 + add $tmp0,$e,$e + fxor @X[($j+2)%16],@X[($j+8)%16],%f18! 1/ 1/ 1:Tmp=X[2,3]^X[8,9] + xor $c,$b,$tmp0 + add $tmp1,$e,$e + sll $b,30,$tmp2 + xor $d,$tmp0,$tmp1 + fxor %f18,@X[$j],@X[$j] ! 2/ 4/ 3:X[0,1]^=X[2,3]^X[8,9] + srl $b,2,$b + add $tmp1,$e,$e + or $tmp2,$b,$b + add $Xi,$e,$e + faligndata @X[$j],@X[$j],%f18 ! 3/ 7/ 5:Tmp=X[0,1]>>>24 +___ +$code.=<<___ if ($i&1 && $i<64); + sll $a,5,$tmp0 !! $i + ld [$Xfer+`4*($i%16)`],$Xi + fpadd32 @X[$j],@X[$j],@X[$j] ! 4/ 8/ 6:X[0,1]<<=1 + srl $a,27,$tmp1 + add $tmp0,$e,$e + fmul8ulx16 %f18,$fmul,%f18 ! 5/10/ 7:Tmp>>=7, Tmp&=1 + xor $c,$b,$tmp0 + add $tmp1,$e,$e + fpadd32 $K,@X[$l],%f20 ! + sll $b,30,$tmp2 + xor $d,$tmp0,$tmp1 + fxors @X[($k+13)%16],@X[$k],@X[$k] !-1/-1/-1:X[0]^=X[13] + srl $b,2,$b + add $tmp1,$e,$e + fxor %f18,@X[$j],@X[$j] ! 8/14/10:X[0,1]|=Tmp + or $tmp2,$b,$b + add $Xi,$e,$e + std %f20,[$Xfer+`4*$l`] ! +___ +$code.=<<___ if ($i==64); + sll $a,5,$tmp0 !! $i + ld [$Xfer+`4*($i%16)`],$Xi + fpadd32 $K,@X[$l],%f20 + srl $a,27,$tmp1 + add $tmp0,$e,$e + xor $c,$b,$tmp0 + add $tmp1,$e,$e + sll $b,30,$tmp2 + xor $d,$tmp0,$tmp1 + std %f20,[$Xfer+`4*$l`] + srl $b,2,$b + add $tmp1,$e,$e + or $tmp2,$b,$b + add $Xi,$e,$e +___ +$code.=<<___ if ($i>64); + sll $a,5,$tmp0 !! $i + ld [$Xfer+`4*($i%16)`],$Xi + srl $a,27,$tmp1 + add $tmp0,$e,$e + xor $c,$b,$tmp0 + add $tmp1,$e,$e + sll $b,30,$tmp2 + xor $d,$tmp0,$tmp1 + srl $b,2,$b + add $tmp1,$e,$e + or $tmp2,$b,$b + add $Xi,$e,$e +___ +} + +sub BODY_40_59 { +my ($i,$a,$b,$c,$d,$e)=@_; +my $j=$i&~1; +my $k=($j+16+2)%16; # ahead reference +my $l=($j+16-2)%16; # behind reference +my $K=@VK[($j+16-2)/20]; + +$j=($j+16)%16; + +$code.=<<___ if (!($i&1)); + sll $a,5,$tmp0 !! $i + ld [$Xfer+`4*($i%16)`],$Xi + fxors @X[($j+14)%16],@X[$j+1],@X[$j+1]! 0/ 0/ 0:X[1]^=X[14] + srl $a,27,$tmp1 + add $tmp0,$e,$e + fxor @X[($j+2)%16],@X[($j+8)%16],%f18! 1/ 1/ 1:Tmp=X[2,3]^X[8,9] + and $c,$b,$tmp0 + add $tmp1,$e,$e + sll $b,30,$tmp2 + or $c,$b,$tmp1 + fxor %f18,@X[$j],@X[$j] ! 2/ 4/ 3:X[0,1]^=X[2,3]^X[8,9] + srl $b,2,$b + and $d,$tmp1,$tmp1 + add $Xi,$e,$e + or $tmp1,$tmp0,$tmp1 + faligndata @X[$j],@X[$j],%f18 ! 3/ 7/ 5:Tmp=X[0,1]>>>24 + or $tmp2,$b,$b + add $tmp1,$e,$e + fpadd32 @X[$j],@X[$j],@X[$j] ! 4/ 8/ 6:X[0,1]<<=1 +___ +$code.=<<___ if ($i&1); + sll $a,5,$tmp0 !! $i + ld [$Xfer+`4*($i%16)`],$Xi + srl $a,27,$tmp1 + add $tmp0,$e,$e + fmul8ulx16 %f18,$fmul,%f18 ! 5/10/ 7:Tmp>>=7, Tmp&=1 + and $c,$b,$tmp0 + add $tmp1,$e,$e + fpadd32 $K,@X[$l],%f20 ! + sll $b,30,$tmp2 + or $c,$b,$tmp1 + fxors @X[($k+13)%16],@X[$k],@X[$k] !-1/-1/-1:X[0]^=X[13] + srl $b,2,$b + and $d,$tmp1,$tmp1 + fxor %f18,@X[$j],@X[$j] ! 8/14/10:X[0,1]|=Tmp + add $Xi,$e,$e + or $tmp1,$tmp0,$tmp1 + or $tmp2,$b,$b + add $tmp1,$e,$e + std %f20,[$Xfer+`4*$l`] ! +___ +} + +# If there is more data to process, then we pre-fetch the data for +# next iteration in last ten rounds... +sub BODY_70_79 { +my ($i,$a,$b,$c,$d,$e)=@_; +my $j=$i&~1; +my $m=($i%8)*2; + +$j=($j+16)%16; + +$code.=<<___ if ($i==70); + sll $a,5,$tmp0 !! $i + ld [$Xfer+`4*($i%16)`],$Xi + srl $a,27,$tmp1 + add $tmp0,$e,$e + ldd [$inp+64],@X[0] + xor $c,$b,$tmp0 + add $tmp1,$e,$e + sll $b,30,$tmp2 + xor $d,$tmp0,$tmp1 + srl $b,2,$b + add $tmp1,$e,$e + or $tmp2,$b,$b + add $Xi,$e,$e + + and $inp,-64,$nXfer + inc 64,$inp + and $nXfer,255,$nXfer + alignaddr %g0,$align,%g0 + add $base,$nXfer,$nXfer +___ +$code.=<<___ if ($i==71); + sll $a,5,$tmp0 !! $i + ld [$Xfer+`4*($i%16)`],$Xi + srl $a,27,$tmp1 + add $tmp0,$e,$e + xor $c,$b,$tmp0 + add $tmp1,$e,$e + sll $b,30,$tmp2 + xor $d,$tmp0,$tmp1 + srl $b,2,$b + add $tmp1,$e,$e + or $tmp2,$b,$b + add $Xi,$e,$e +___ +$code.=<<___ if ($i>=72); + faligndata @X[$m],@X[$m+2],@X[$m] + sll $a,5,$tmp0 !! $i + ld [$Xfer+`4*($i%16)`],$Xi + srl $a,27,$tmp1 + add $tmp0,$e,$e + xor $c,$b,$tmp0 + add $tmp1,$e,$e + fpadd32 $VK_00_19,@X[$m],%f20 + sll $b,30,$tmp2 + xor $d,$tmp0,$tmp1 + srl $b,2,$b + add $tmp1,$e,$e + or $tmp2,$b,$b + add $Xi,$e,$e +___ +$code.=<<___ if ($i<77); + ldd [$inp+`8*($i+1-70)`],@X[2*($i+1-70)] +___ +$code.=<<___ if ($i==77); # redundant if $inp was aligned + add $align,63,$tmp0 + and $tmp0,-8,$tmp0 + ldd [$inp+$tmp0],@X[16] +___ +$code.=<<___ if ($i>=72); + std %f20,[$nXfer+`4*$m`] +___ +} + +$code.=<<___; +.section ".text",#alloc,#execinstr + +.align 64 +vis_const: +.long 0x5a827999,0x5a827999 ! K_00_19 +.long 0x6ed9eba1,0x6ed9eba1 ! K_20_39 +.long 0x8f1bbcdc,0x8f1bbcdc ! K_40_59 +.long 0xca62c1d6,0xca62c1d6 ! K_60_79 +.long 0x00000100,0x00000100 +.align 64 +.type vis_const,#object +.size vis_const,(.-vis_const) + +.globl sha1_block_data_order +sha1_block_data_order: + save %sp,-$frame,%sp + add %fp,$bias-256,$base + +1: call .+8 + add %o7,vis_const-1b,$tmp0 + + ldd [$tmp0+0],$VK_00_19 + ldd [$tmp0+8],$VK_20_39 + ldd [$tmp0+16],$VK_40_59 + ldd [$tmp0+24],$VK_60_79 + ldd [$tmp0+32],$fmul + + ld [$ctx+0],$Actx + and $base,-256,$base + ld [$ctx+4],$Bctx + sub $base,$bias+$frame,%sp + ld [$ctx+8],$Cctx + and $inp,7,$align + ld [$ctx+12],$Dctx + and $inp,-8,$inp + ld [$ctx+16],$Ectx + + ! X[16] is maintained in FP register bank + alignaddr %g0,$align,%g0 + ldd [$inp+0],@X[0] + sub $inp,-64,$Xfer + ldd [$inp+8],@X[2] + and $Xfer,-64,$Xfer + ldd [$inp+16],@X[4] + and $Xfer,255,$Xfer + ldd [$inp+24],@X[6] + add $base,$Xfer,$Xfer + ldd [$inp+32],@X[8] + ldd [$inp+40],@X[10] + ldd [$inp+48],@X[12] + brz,pt $align,.Laligned + ldd [$inp+56],@X[14] + + ldd [$inp+64],@X[16] + faligndata @X[0],@X[2],@X[0] + faligndata @X[2],@X[4],@X[2] + faligndata @X[4],@X[6],@X[4] + faligndata @X[6],@X[8],@X[6] + faligndata @X[8],@X[10],@X[8] + faligndata @X[10],@X[12],@X[10] + faligndata @X[12],@X[14],@X[12] + faligndata @X[14],@X[16],@X[14] + +.Laligned: + mov 5,$tmp0 + dec 1,$len + alignaddr %g0,$tmp0,%g0 + fpadd32 $VK_00_19,@X[0],%f16 + fpadd32 $VK_00_19,@X[2],%f18 + fpadd32 $VK_00_19,@X[4],%f20 + fpadd32 $VK_00_19,@X[6],%f22 + fpadd32 $VK_00_19,@X[8],%f24 + fpadd32 $VK_00_19,@X[10],%f26 + fpadd32 $VK_00_19,@X[12],%f28 + fpadd32 $VK_00_19,@X[14],%f30 + std %f16,[$Xfer+0] + mov $Actx,$A + std %f18,[$Xfer+8] + mov $Bctx,$B + std %f20,[$Xfer+16] + mov $Cctx,$C + std %f22,[$Xfer+24] + mov $Dctx,$D + std %f24,[$Xfer+32] + mov $Ectx,$E + std %f26,[$Xfer+40] + fxors @X[13],@X[0],@X[0] + std %f28,[$Xfer+48] + ba .Loop + std %f30,[$Xfer+56] +.align 32 +.Loop: +___ +for ($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); } +for (;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } +for (;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } +for (;$i<70;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + tst $len + bz,pn `$bits==32?"%icc":"%xcc"`,.Ltail + nop +___ +for (;$i<80;$i++) { &BODY_70_79($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + add $A,$Actx,$Actx + add $B,$Bctx,$Bctx + add $C,$Cctx,$Cctx + add $D,$Dctx,$Dctx + add $E,$Ectx,$Ectx + mov 5,$tmp0 + fxors @X[13],@X[0],@X[0] + mov $Actx,$A + mov $Bctx,$B + mov $Cctx,$C + mov $Dctx,$D + mov $Ectx,$E + alignaddr %g0,$tmp0,%g0 + dec 1,$len + ba .Loop + mov $nXfer,$Xfer + +.align 32 +.Ltail: +___ +for($i=70;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + add $A,$Actx,$Actx + add $B,$Bctx,$Bctx + add $C,$Cctx,$Cctx + add $D,$Dctx,$Dctx + add $E,$Ectx,$Ectx + + st $Actx,[$ctx+0] + st $Bctx,[$ctx+4] + st $Cctx,[$ctx+8] + st $Dctx,[$ctx+12] + st $Ectx,[$ctx+16] + + ret + restore +.type sha1_block_data_order,#function +.size sha1_block_data_order,(.-sha1_block_data_order) +.asciz "SHA1 block transform for SPARCv9a, CRYPTOGAMS by <appro\@openssl.org>" +.align 4 +___ + +# Purpose of these subroutines is to explicitly encode VIS instructions, +# so that one can compile the module without having to specify VIS +# extentions on compiler command line, e.g. -xarch=v9 vs. -xarch=v9a. +# Idea is to reserve for option to produce "universal" binary and let +# programmer detect if current CPU is VIS capable at run-time. +sub unvis { +my ($mnemonic,$rs1,$rs2,$rd)=@_; +my $ref,$opf; +my %visopf = ( "fmul8ulx16" => 0x037, + "faligndata" => 0x048, + "fpadd32" => 0x052, + "fxor" => 0x06c, + "fxors" => 0x06d ); + + $ref = "$mnemonic\t$rs1,$rs2,$rd"; + + if ($opf=$visopf{$mnemonic}) { + foreach ($rs1,$rs2,$rd) { + return $ref if (!/%f([0-9]{1,2})/); + $_=$1; + if ($1>=32) { + return $ref if ($1&1); + # re-encode for upper double register addressing + $_=($1|$1>>5)&31; + } + } + + return sprintf ".word\t0x%08x !%s", + 0x81b00000|$rd<<25|$rs1<<14|$opf<<5|$rs2, + $ref; + } else { + return $ref; + } +} +sub unalignaddr { +my ($mnemonic,$rs1,$rs2,$rd)=@_; +my %bias = ( "g" => 0, "o" => 8, "l" => 16, "i" => 24 ); +my $ref="$mnemonic\t$rs1,$rs2,$rd"; + + foreach ($rs1,$rs2,$rd) { + if (/%([goli])([0-7])/) { $_=$bias{$1}+$2; } + else { return $ref; } + } + return sprintf ".word\t0x%08x !%s", + 0x81b00300|$rd<<25|$rs1<<14|$rs2, + $ref; +} + +$code =~ s/\`([^\`]*)\`/eval $1/gem; +$code =~ s/\b(f[^\s]*)\s+(%f[0-9]{1,2}),(%f[0-9]{1,2}),(%f[0-9]{1,2})/ + &unvis($1,$2,$3,$4) + /gem; +$code =~ s/\b(alignaddr)\s+(%[goli][0-7]),(%[goli][0-7]),(%[goli][0-7])/ + &unalignaddr($1,$2,$3,$4) + /gem; +print $code; +close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha1-thumb.pl b/app/openssl/crypto/sha/asm/sha1-thumb.pl new file mode 100644 index 00000000..7c9ea9b0 --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha1-thumb.pl @@ -0,0 +1,259 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# sha1_block for Thumb. +# +# January 2007. +# +# The code does not present direct interest to OpenSSL, because of low +# performance. Its purpose is to establish _size_ benchmark. Pretty +# useless one I must say, because 30% or 88 bytes larger ARMv4 code +# [avialable on demand] is almost _twice_ as fast. It should also be +# noted that in-lining of .Lcommon and .Lrotate improves performance +# by over 40%, while code increases by only 10% or 32 bytes. But once +# again, the goal was to establish _size_ benchmark, not performance. + +$output=shift; +open STDOUT,">$output"; + +$inline=0; +#$cheat_on_binutils=1; + +$t0="r0"; +$t1="r1"; +$t2="r2"; +$a="r3"; +$b="r4"; +$c="r5"; +$d="r6"; +$e="r7"; +$K="r8"; # "upper" registers can be used in add/sub and mov insns +$ctx="r9"; +$inp="r10"; +$len="r11"; +$Xi="r12"; + +sub common { +<<___; + sub $t0,#4 + ldr $t1,[$t0] + add $e,$K @ E+=K_xx_xx + lsl $t2,$a,#5 + add $t2,$e + lsr $e,$a,#27 + add $t2,$e @ E+=ROR(A,27) + add $t2,$t1 @ E+=X[i] +___ +} +sub rotate { +<<___; + mov $e,$d @ E=D + mov $d,$c @ D=C + lsl $c,$b,#30 + lsr $b,$b,#2 + orr $c,$b @ C=ROR(B,2) + mov $b,$a @ B=A + add $a,$t2,$t1 @ A=E+F_xx_xx(B,C,D) +___ +} + +sub BODY_00_19 { +$code.=$inline?&common():"\tbl .Lcommon\n"; +$code.=<<___; + mov $t1,$c + eor $t1,$d + and $t1,$b + eor $t1,$d @ F_00_19(B,C,D) +___ +$code.=$inline?&rotate():"\tbl .Lrotate\n"; +} + +sub BODY_20_39 { +$code.=$inline?&common():"\tbl .Lcommon\n"; +$code.=<<___; + mov $t1,$b + eor $t1,$c + eor $t1,$d @ F_20_39(B,C,D) +___ +$code.=$inline?&rotate():"\tbl .Lrotate\n"; +} + +sub BODY_40_59 { +$code.=$inline?&common():"\tbl .Lcommon\n"; +$code.=<<___; + mov $t1,$b + and $t1,$c + mov $e,$b + orr $e,$c + and $e,$d + orr $t1,$e @ F_40_59(B,C,D) +___ +$code.=$inline?&rotate():"\tbl .Lrotate\n"; +} + +$code=<<___; +.text +.code 16 + +.global sha1_block_data_order +.type sha1_block_data_order,%function + +.align 2 +sha1_block_data_order: +___ +if ($cheat_on_binutils) { +$code.=<<___; +.code 32 + add r3,pc,#1 + bx r3 @ switch to Thumb ISA +.code 16 +___ +} +$code.=<<___; + push {r4-r7} + mov r3,r8 + mov r4,r9 + mov r5,r10 + mov r6,r11 + mov r7,r12 + push {r3-r7,lr} + lsl r2,#6 + mov $ctx,r0 @ save context + mov $inp,r1 @ save inp + mov $len,r2 @ save len + add $len,$inp @ $len to point at inp end + +.Lloop: + mov $Xi,sp + mov $t2,sp + sub $t2,#16*4 @ [3] +.LXload: + ldrb $a,[$t1,#0] @ $t1 is r1 and holds inp + ldrb $b,[$t1,#1] + ldrb $c,[$t1,#2] + ldrb $d,[$t1,#3] + lsl $a,#24 + lsl $b,#16 + lsl $c,#8 + orr $a,$b + orr $a,$c + orr $a,$d + add $t1,#4 + push {$a} + cmp sp,$t2 + bne .LXload @ [+14*16] + + mov $inp,$t1 @ update $inp + sub $t2,#32*4 + sub $t2,#32*4 + mov $e,#31 @ [+4] +.LXupdate: + ldr $a,[sp,#15*4] + ldr $b,[sp,#13*4] + ldr $c,[sp,#7*4] + ldr $d,[sp,#2*4] + eor $a,$b + eor $a,$c + eor $a,$d + ror $a,$e + push {$a} + cmp sp,$t2 + bne .LXupdate @ [+(11+1)*64] + + ldmia $t0!,{$a,$b,$c,$d,$e} @ $t0 is r0 and holds ctx + mov $t0,$Xi + + ldr $t2,.LK_00_19 + mov $t1,$t0 + sub $t1,#20*4 + mov $Xi,$t1 + mov $K,$t2 @ [+7+4] +.L_00_19: +___ + &BODY_00_19(); +$code.=<<___; + cmp $Xi,$t0 + bne .L_00_19 @ [+(2+9+4+2+8+2)*20] + + ldr $t2,.LK_20_39 + mov $t1,$t0 + sub $t1,#20*4 + mov $Xi,$t1 + mov $K,$t2 @ [+5] +.L_20_39_or_60_79: +___ + &BODY_20_39(); +$code.=<<___; + cmp $Xi,$t0 + bne .L_20_39_or_60_79 @ [+(2+9+3+2+8+2)*20*2] + cmp sp,$t0 + beq .Ldone @ [+2] + + ldr $t2,.LK_40_59 + mov $t1,$t0 + sub $t1,#20*4 + mov $Xi,$t1 + mov $K,$t2 @ [+5] +.L_40_59: +___ + &BODY_40_59(); +$code.=<<___; + cmp $Xi,$t0 + bne .L_40_59 @ [+(2+9+6+2+8+2)*20] + + ldr $t2,.LK_60_79 + mov $Xi,sp + mov $K,$t2 + b .L_20_39_or_60_79 @ [+4] +.Ldone: + mov $t0,$ctx + ldr $t1,[$t0,#0] + ldr $t2,[$t0,#4] + add $a,$t1 + ldr $t1,[$t0,#8] + add $b,$t2 + ldr $t2,[$t0,#12] + add $c,$t1 + ldr $t1,[$t0,#16] + add $d,$t2 + add $e,$t1 + stmia $t0!,{$a,$b,$c,$d,$e} @ [+20] + + add sp,#80*4 @ deallocate stack frame + mov $t0,$ctx @ restore ctx + mov $t1,$inp @ restore inp + cmp $t1,$len + beq .Lexit + b .Lloop @ [+6] total 3212 cycles +.Lexit: + pop {r2-r7} + mov r8,r2 + mov r9,r3 + mov r10,r4 + mov r11,r5 + mov r12,r6 + mov lr,r7 + pop {r4-r7} + bx lr +.align 2 +___ +$code.=".Lcommon:\n".&common()."\tmov pc,lr\n" if (!$inline); +$code.=".Lrotate:\n".&rotate()."\tmov pc,lr\n" if (!$inline); +$code.=<<___; +.align 2 +.LK_00_19: .word 0x5a827999 +.LK_20_39: .word 0x6ed9eba1 +.LK_40_59: .word 0x8f1bbcdc +.LK_60_79: .word 0xca62c1d6 +.size sha1_block_data_order,.-sha1_block_data_order +.asciz "SHA1 block transform for Thumb, CRYPTOGAMS by <appro\@openssl.org>" +___ + +print $code; +close STDOUT; # enforce flush diff --git a/app/openssl/crypto/sha/asm/sha1-x86_64.pl b/app/openssl/crypto/sha/asm/sha1-x86_64.pl new file mode 100755 index 00000000..4edc5ea9 --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha1-x86_64.pl @@ -0,0 +1,351 @@ +#!/usr/bin/env perl +# +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== +# +# sha1_block procedure for x86_64. +# +# It was brought to my attention that on EM64T compiler-generated code +# was far behind 32-bit assembler implementation. This is unlike on +# Opteron where compiler-generated code was only 15% behind 32-bit +# assembler, which originally made it hard to motivate the effort. +# There was suggestion to mechanically translate 32-bit code, but I +# dismissed it, reasoning that x86_64 offers enough register bank +# capacity to fully utilize SHA-1 parallelism. Therefore this fresh +# implementation:-) However! While 64-bit code does performs better +# on Opteron, I failed to beat 32-bit assembler on EM64T core. Well, +# x86_64 does offer larger *addressable* bank, but out-of-order core +# reaches for even more registers through dynamic aliasing, and EM64T +# core must have managed to run-time optimize even 32-bit code just as +# good as 64-bit one. Performance improvement is summarized in the +# following table: +# +# gcc 3.4 32-bit asm cycles/byte +# Opteron +45% +20% 6.8 +# Xeon P4 +65% +0% 9.9 +# Core2 +60% +10% 7.0 + +$flavour = shift; +$output = shift; +if ($flavour =~ /\./) { $output = $flavour; undef $flavour; } + +$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/); + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or +( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or +die "can't locate x86_64-xlate.pl"; + +open STDOUT,"| $^X $xlate $flavour $output"; + +$ctx="%rdi"; # 1st arg +$inp="%rsi"; # 2nd arg +$num="%rdx"; # 3rd arg + +# reassign arguments in order to produce more compact code +$ctx="%r8"; +$inp="%r9"; +$num="%r10"; + +$xi="%eax"; +$t0="%ebx"; +$t1="%ecx"; +$A="%edx"; +$B="%esi"; +$C="%edi"; +$D="%ebp"; +$E="%r11d"; +$T="%r12d"; + +@V=($A,$B,$C,$D,$E,$T); + +sub PROLOGUE { +my $func=shift; +$code.=<<___; +.globl $func +.type $func,\@function,3 +.align 16 +$func: + push %rbx + push %rbp + push %r12 + mov %rsp,%r11 + mov %rdi,$ctx # reassigned argument + sub \$`8+16*4`,%rsp + mov %rsi,$inp # reassigned argument + and \$-64,%rsp + mov %rdx,$num # reassigned argument + mov %r11,`16*4`(%rsp) +.Lprologue: + + mov 0($ctx),$A + mov 4($ctx),$B + mov 8($ctx),$C + mov 12($ctx),$D + mov 16($ctx),$E +___ +} + +sub EPILOGUE { +my $func=shift; +$code.=<<___; + mov `16*4`(%rsp),%rsi + mov (%rsi),%r12 + mov 8(%rsi),%rbp + mov 16(%rsi),%rbx + lea 24(%rsi),%rsp +.Lepilogue: + ret +.size $func,.-$func +___ +} + +sub BODY_00_19 { +my ($i,$a,$b,$c,$d,$e,$f,$host)=@_; +my $j=$i+1; +$code.=<<___ if ($i==0); + mov `4*$i`($inp),$xi + `"bswap $xi" if(!defined($host))` + mov $xi,`4*$i`(%rsp) +___ +$code.=<<___ if ($i<15); + lea 0x5a827999($xi,$e),$f + mov $c,$t0 + mov `4*$j`($inp),$xi + mov $a,$e + xor $d,$t0 + `"bswap $xi" if(!defined($host))` + rol \$5,$e + and $b,$t0 + mov $xi,`4*$j`(%rsp) + add $e,$f + xor $d,$t0 + rol \$30,$b + add $t0,$f +___ +$code.=<<___ if ($i>=15); + lea 0x5a827999($xi,$e),$f + mov `4*($j%16)`(%rsp),$xi + mov $c,$t0 + mov $a,$e + xor `4*(($j+2)%16)`(%rsp),$xi + xor $d,$t0 + rol \$5,$e + xor `4*(($j+8)%16)`(%rsp),$xi + and $b,$t0 + add $e,$f + xor `4*(($j+13)%16)`(%rsp),$xi + xor $d,$t0 + rol \$30,$b + add $t0,$f + rol \$1,$xi + mov $xi,`4*($j%16)`(%rsp) +___ +} + +sub BODY_20_39 { +my ($i,$a,$b,$c,$d,$e,$f)=@_; +my $j=$i+1; +my $K=($i<40)?0x6ed9eba1:0xca62c1d6; +$code.=<<___ if ($i<79); + lea $K($xi,$e),$f + mov `4*($j%16)`(%rsp),$xi + mov $c,$t0 + mov $a,$e + xor `4*(($j+2)%16)`(%rsp),$xi + xor $b,$t0 + rol \$5,$e + xor `4*(($j+8)%16)`(%rsp),$xi + xor $d,$t0 + add $e,$f + xor `4*(($j+13)%16)`(%rsp),$xi + rol \$30,$b + add $t0,$f + rol \$1,$xi +___ +$code.=<<___ if ($i<76); + mov $xi,`4*($j%16)`(%rsp) +___ +$code.=<<___ if ($i==79); + lea $K($xi,$e),$f + mov $c,$t0 + mov $a,$e + xor $b,$t0 + rol \$5,$e + xor $d,$t0 + add $e,$f + rol \$30,$b + add $t0,$f +___ +} + +sub BODY_40_59 { +my ($i,$a,$b,$c,$d,$e,$f)=@_; +my $j=$i+1; +$code.=<<___; + lea 0x8f1bbcdc($xi,$e),$f + mov `4*($j%16)`(%rsp),$xi + mov $b,$t0 + mov $b,$t1 + xor `4*(($j+2)%16)`(%rsp),$xi + mov $a,$e + and $c,$t0 + xor `4*(($j+8)%16)`(%rsp),$xi + or $c,$t1 + rol \$5,$e + xor `4*(($j+13)%16)`(%rsp),$xi + and $d,$t1 + add $e,$f + rol \$1,$xi + or $t1,$t0 + rol \$30,$b + mov $xi,`4*($j%16)`(%rsp) + add $t0,$f +___ +} + +$code=".text\n"; + +&PROLOGUE("sha1_block_data_order"); +$code.=".align 4\n.Lloop:\n"; +for($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); } +for(;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } +for(;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } +for(;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + add 0($ctx),$E + add 4($ctx),$T + add 8($ctx),$A + add 12($ctx),$B + add 16($ctx),$C + mov $E,0($ctx) + mov $T,4($ctx) + mov $A,8($ctx) + mov $B,12($ctx) + mov $C,16($ctx) + + xchg $E,$A # mov $E,$A + xchg $T,$B # mov $T,$B + xchg $E,$C # mov $A,$C + xchg $T,$D # mov $B,$D + # mov $C,$E + lea `16*4`($inp),$inp + sub \$1,$num + jnz .Lloop +___ +&EPILOGUE("sha1_block_data_order"); +$code.=<<___; +.asciz "SHA1 block transform for x86_64, CRYPTOGAMS by <appro\@openssl.org>" +.align 16 +___ + +# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame, +# CONTEXT *context,DISPATCHER_CONTEXT *disp) +if ($win64) { +$rec="%rcx"; +$frame="%rdx"; +$context="%r8"; +$disp="%r9"; + +$code.=<<___; +.extern __imp_RtlVirtualUnwind +.type se_handler,\@abi-omnipotent +.align 16 +se_handler: + push %rsi + push %rdi + push %rbx + push %rbp + push %r12 + push %r13 + push %r14 + push %r15 + pushfq + sub \$64,%rsp + + mov 120($context),%rax # pull context->Rax + mov 248($context),%rbx # pull context->Rip + + lea .Lprologue(%rip),%r10 + cmp %r10,%rbx # context->Rip<.Lprologue + jb .Lin_prologue + + mov 152($context),%rax # pull context->Rsp + + lea .Lepilogue(%rip),%r10 + cmp %r10,%rbx # context->Rip>=.Lepilogue + jae .Lin_prologue + + mov `16*4`(%rax),%rax # pull saved stack pointer + lea 24(%rax),%rax + + mov -8(%rax),%rbx + mov -16(%rax),%rbp + mov -24(%rax),%r12 + mov %rbx,144($context) # restore context->Rbx + mov %rbp,160($context) # restore context->Rbp + mov %r12,216($context) # restore context->R12 + +.Lin_prologue: + mov 8(%rax),%rdi + mov 16(%rax),%rsi + mov %rax,152($context) # restore context->Rsp + mov %rsi,168($context) # restore context->Rsi + mov %rdi,176($context) # restore context->Rdi + + mov 40($disp),%rdi # disp->ContextRecord + mov $context,%rsi # context + mov \$154,%ecx # sizeof(CONTEXT) + .long 0xa548f3fc # cld; rep movsq + + mov $disp,%rsi + xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER + mov 8(%rsi),%rdx # arg2, disp->ImageBase + mov 0(%rsi),%r8 # arg3, disp->ControlPc + mov 16(%rsi),%r9 # arg4, disp->FunctionEntry + mov 40(%rsi),%r10 # disp->ContextRecord + lea 56(%rsi),%r11 # &disp->HandlerData + lea 24(%rsi),%r12 # &disp->EstablisherFrame + mov %r10,32(%rsp) # arg5 + mov %r11,40(%rsp) # arg6 + mov %r12,48(%rsp) # arg7 + mov %rcx,56(%rsp) # arg8, (NULL) + call *__imp_RtlVirtualUnwind(%rip) + + mov \$1,%eax # ExceptionContinueSearch + add \$64,%rsp + popfq + pop %r15 + pop %r14 + pop %r13 + pop %r12 + pop %rbp + pop %rbx + pop %rdi + pop %rsi + ret +.size se_handler,.-se_handler + +.section .pdata +.align 4 + .rva .LSEH_begin_sha1_block_data_order + .rva .LSEH_end_sha1_block_data_order + .rva .LSEH_info_sha1_block_data_order + +.section .xdata +.align 8 +.LSEH_info_sha1_block_data_order: + .byte 9,0,0,0 + .rva se_handler +___ +} + +#################################################################### + +$code =~ s/\`([^\`]*)\`/eval $1/gem; +print $code; +close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha256-586.pl b/app/openssl/crypto/sha/asm/sha256-586.pl new file mode 100644 index 00000000..ecc8b69c --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha256-586.pl @@ -0,0 +1,251 @@ +#!/usr/bin/env perl +# +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== +# +# SHA256 block transform for x86. September 2007. +# +# Performance in clock cycles per processed byte (less is better): +# +# Pentium PIII P4 AMD K8 Core2 +# gcc 46 36 41 27 26 +# icc 57 33 38 25 23 +# x86 asm 40 30 35 20 20 +# x86_64 asm(*) - - 21 15.8 16.5 +# +# (*) x86_64 assembler performance is presented for reference +# purposes. +# +# Performance improvement over compiler generated code varies from +# 10% to 40% [see above]. Not very impressive on some µ-archs, but +# it's 5 times smaller and optimizies amount of writes. + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +push(@INC,"${dir}","${dir}../../perlasm"); +require "x86asm.pl"; + +&asm_init($ARGV[0],"sha512-586.pl",$ARGV[$#ARGV] eq "386"); + +$A="eax"; +$E="edx"; +$T="ebx"; +$Aoff=&DWP(0,"esp"); +$Boff=&DWP(4,"esp"); +$Coff=&DWP(8,"esp"); +$Doff=&DWP(12,"esp"); +$Eoff=&DWP(16,"esp"); +$Foff=&DWP(20,"esp"); +$Goff=&DWP(24,"esp"); +$Hoff=&DWP(28,"esp"); +$Xoff=&DWP(32,"esp"); +$K256="ebp"; + +sub BODY_00_15() { + my $in_16_63=shift; + + &mov ("ecx",$E); + &add ($T,&DWP(4*(8+15+16-9),"esp")) if ($in_16_63); # T += X[-7] + &ror ("ecx",6); + &mov ("edi",$E); + &ror ("edi",11); + &mov ("esi",$Foff); + &xor ("ecx","edi"); + &ror ("edi",25-11); + &mov (&DWP(4*(8+15),"esp"),$T) if ($in_16_63); # save X[0] + &xor ("ecx","edi"); # Sigma1(e) + &mov ("edi",$Goff); + &add ($T,"ecx"); # T += Sigma1(e) + &mov ($Eoff,$E); # modulo-scheduled + + &xor ("esi","edi"); + &mov ("ecx",$A); + &and ("esi",$E); + &mov ($E,$Doff); # e becomes d, which is e in next iteration + &xor ("esi","edi"); # Ch(e,f,g) + &mov ("edi",$A); + &add ($T,"esi"); # T += Ch(e,f,g) + + &ror ("ecx",2); + &add ($T,$Hoff); # T += h + &ror ("edi",13); + &mov ("esi",$Boff); + &xor ("ecx","edi"); + &ror ("edi",22-13); + &add ($E,$T); # d += T + &xor ("ecx","edi"); # Sigma0(a) + &mov ("edi",$Coff); + + &add ($T,"ecx"); # T += Sigma0(a) + &mov ($Aoff,$A); # modulo-scheduled + + &mov ("ecx",$A); + &sub ("esp",4); + &or ($A,"esi"); # a becomes h, which is a in next iteration + &and ("ecx","esi"); + &and ($A,"edi"); + &mov ("esi",&DWP(0,$K256)); + &or ($A,"ecx"); # h=Maj(a,b,c) + + &add ($K256,4); + &add ($A,$T); # h += T + &mov ($T,&DWP(4*(8+15+16-1),"esp")) if ($in_16_63); # preload T + &add ($E,"esi"); # d += K256[i] + &add ($A,"esi"); # h += K256[i] +} + +&function_begin("sha256_block_data_order"); + &mov ("esi",wparam(0)); # ctx + &mov ("edi",wparam(1)); # inp + &mov ("eax",wparam(2)); # num + &mov ("ebx","esp"); # saved sp + + &call (&label("pic_point")); # make it PIC! +&set_label("pic_point"); + &blindpop($K256); + &lea ($K256,&DWP(&label("K256")."-".&label("pic_point"),$K256)); + + &sub ("esp",16); + &and ("esp",-64); + + &shl ("eax",6); + &add ("eax","edi"); + &mov (&DWP(0,"esp"),"esi"); # ctx + &mov (&DWP(4,"esp"),"edi"); # inp + &mov (&DWP(8,"esp"),"eax"); # inp+num*128 + &mov (&DWP(12,"esp"),"ebx"); # saved sp + +&set_label("loop",16); + # copy input block to stack reversing byte and dword order + for($i=0;$i<4;$i++) { + &mov ("eax",&DWP($i*16+0,"edi")); + &mov ("ebx",&DWP($i*16+4,"edi")); + &mov ("ecx",&DWP($i*16+8,"edi")); + &mov ("edx",&DWP($i*16+12,"edi")); + &bswap ("eax"); + &bswap ("ebx"); + &bswap ("ecx"); + &bswap ("edx"); + &push ("eax"); + &push ("ebx"); + &push ("ecx"); + &push ("edx"); + } + &add ("edi",64); + &sub ("esp",4*8); # place for A,B,C,D,E,F,G,H + &mov (&DWP(4*(8+16)+4,"esp"),"edi"); + + # copy ctx->h[0-7] to A,B,C,D,E,F,G,H on stack + &mov ($A,&DWP(0,"esi")); + &mov ("ebx",&DWP(4,"esi")); + &mov ("ecx",&DWP(8,"esi")); + &mov ("edi",&DWP(12,"esi")); + # &mov ($Aoff,$A); + &mov ($Boff,"ebx"); + &mov ($Coff,"ecx"); + &mov ($Doff,"edi"); + &mov ($E,&DWP(16,"esi")); + &mov ("ebx",&DWP(20,"esi")); + &mov ("ecx",&DWP(24,"esi")); + &mov ("edi",&DWP(28,"esi")); + # &mov ($Eoff,$E); + &mov ($Foff,"ebx"); + &mov ($Goff,"ecx"); + &mov ($Hoff,"edi"); + +&set_label("00_15",16); + &mov ($T,&DWP(4*(8+15),"esp")); + + &BODY_00_15(); + + &cmp ("esi",0xc19bf174); + &jne (&label("00_15")); + + &mov ($T,&DWP(4*(8+15+16-1),"esp")); # preloaded in BODY_00_15(1) +&set_label("16_63",16); + &mov ("esi",$T); + &mov ("ecx",&DWP(4*(8+15+16-14),"esp")); + &shr ($T,3); + &ror ("esi",7); + &xor ($T,"esi"); + &ror ("esi",18-7); + &mov ("edi","ecx"); + &xor ($T,"esi"); # T = sigma0(X[-15]) + + &shr ("ecx",10); + &mov ("esi",&DWP(4*(8+15+16),"esp")); + &ror ("edi",17); + &xor ("ecx","edi"); + &ror ("edi",19-17); + &add ($T,"esi"); # T += X[-16] + &xor ("edi","ecx") # sigma1(X[-2]) + + &add ($T,"edi"); # T += sigma1(X[-2]) + # &add ($T,&DWP(4*(8+15+16-9),"esp")); # T += X[-7], moved to BODY_00_15(1) + # &mov (&DWP(4*(8+15),"esp"),$T); # save X[0] + + &BODY_00_15(1); + + &cmp ("esi",0xc67178f2); + &jne (&label("16_63")); + + &mov ("esi",&DWP(4*(8+16+64)+0,"esp"));#ctx + # &mov ($A,$Aoff); + &mov ("ebx",$Boff); + &mov ("ecx",$Coff); + &mov ("edi",$Doff); + &add ($A,&DWP(0,"esi")); + &add ("ebx",&DWP(4,"esi")); + &add ("ecx",&DWP(8,"esi")); + &add ("edi",&DWP(12,"esi")); + &mov (&DWP(0,"esi"),$A); + &mov (&DWP(4,"esi"),"ebx"); + &mov (&DWP(8,"esi"),"ecx"); + &mov (&DWP(12,"esi"),"edi"); + # &mov ($E,$Eoff); + &mov ("eax",$Foff); + &mov ("ebx",$Goff); + &mov ("ecx",$Hoff); + &mov ("edi",&DWP(4*(8+16+64)+4,"esp"));#inp + &add ($E,&DWP(16,"esi")); + &add ("eax",&DWP(20,"esi")); + &add ("ebx",&DWP(24,"esi")); + &add ("ecx",&DWP(28,"esi")); + &mov (&DWP(16,"esi"),$E); + &mov (&DWP(20,"esi"),"eax"); + &mov (&DWP(24,"esi"),"ebx"); + &mov (&DWP(28,"esi"),"ecx"); + + &add ("esp",4*(8+16+64)); # destroy frame + &sub ($K256,4*64); # rewind K + + &cmp ("edi",&DWP(8,"esp")); # are we done yet? + &jb (&label("loop")); + + &mov ("esp",&DWP(12,"esp")); # restore sp +&function_end_A(); + +&set_label("K256",64); # Yes! I keep it in the code segment! + &data_word(0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5); + &data_word(0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5); + &data_word(0xd807aa98,0x12835b01,0x243185be,0x550c7dc3); + &data_word(0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174); + &data_word(0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc); + &data_word(0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da); + &data_word(0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7); + &data_word(0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967); + &data_word(0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13); + &data_word(0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85); + &data_word(0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3); + &data_word(0xd192e819,0xd6990624,0xf40e3585,0x106aa070); + &data_word(0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5); + &data_word(0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3); + &data_word(0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208); + &data_word(0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2); +&function_end_B("sha256_block_data_order"); +&asciz("SHA256 block transform for x86, CRYPTOGAMS by <appro\@openssl.org>"); + +&asm_finish(); diff --git a/app/openssl/crypto/sha/asm/sha256-armv4.pl b/app/openssl/crypto/sha/asm/sha256-armv4.pl new file mode 100644 index 00000000..492cb62b --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha256-armv4.pl @@ -0,0 +1,186 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# SHA256 block procedure for ARMv4. May 2007. + +# Performance is ~2x better than gcc 3.4 generated code and in "abso- +# lute" terms is ~2250 cycles per 64-byte block or ~35 cycles per +# byte [on single-issue Xscale PXA250 core]. + +# July 2010. +# +# Rescheduling for dual-issue pipeline resulted in 22% improvement on +# Cortex A8 core and ~20 cycles per processed byte. + +while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {} +open STDOUT,">$output"; + +$ctx="r0"; $t0="r0"; +$inp="r1"; +$len="r2"; $t1="r2"; +$T1="r3"; +$A="r4"; +$B="r5"; +$C="r6"; +$D="r7"; +$E="r8"; +$F="r9"; +$G="r10"; +$H="r11"; +@V=($A,$B,$C,$D,$E,$F,$G,$H); +$t2="r12"; +$Ktbl="r14"; + +@Sigma0=( 2,13,22); +@Sigma1=( 6,11,25); +@sigma0=( 7,18, 3); +@sigma1=(17,19,10); + +sub BODY_00_15 { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; + +$code.=<<___ if ($i<16); + ldrb $T1,[$inp,#3] @ $i + ldrb $t2,[$inp,#2] + ldrb $t1,[$inp,#1] + ldrb $t0,[$inp],#4 + orr $T1,$T1,$t2,lsl#8 + orr $T1,$T1,$t1,lsl#16 + orr $T1,$T1,$t0,lsl#24 + `"str $inp,[sp,#17*4]" if ($i==15)` +___ +$code.=<<___; + ldr $t2,[$Ktbl],#4 @ *K256++ + mov $t0,$e,ror#$Sigma1[0] + str $T1,[sp,#`$i%16`*4] + eor $t0,$t0,$e,ror#$Sigma1[1] + eor $t1,$f,$g + eor $t0,$t0,$e,ror#$Sigma1[2] @ Sigma1(e) + and $t1,$t1,$e + add $T1,$T1,$t0 + eor $t1,$t1,$g @ Ch(e,f,g) + add $T1,$T1,$h + mov $h,$a,ror#$Sigma0[0] + add $T1,$T1,$t1 + eor $h,$h,$a,ror#$Sigma0[1] + add $T1,$T1,$t2 + eor $h,$h,$a,ror#$Sigma0[2] @ Sigma0(a) + orr $t0,$a,$b + and $t1,$a,$b + and $t0,$t0,$c + add $h,$h,$T1 + orr $t0,$t0,$t1 @ Maj(a,b,c) + add $d,$d,$T1 + add $h,$h,$t0 +___ +} + +sub BODY_16_XX { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; + +$code.=<<___; + ldr $t1,[sp,#`($i+1)%16`*4] @ $i + ldr $t2,[sp,#`($i+14)%16`*4] + ldr $T1,[sp,#`($i+0)%16`*4] + mov $t0,$t1,ror#$sigma0[0] + ldr $inp,[sp,#`($i+9)%16`*4] + eor $t0,$t0,$t1,ror#$sigma0[1] + eor $t0,$t0,$t1,lsr#$sigma0[2] @ sigma0(X[i+1]) + mov $t1,$t2,ror#$sigma1[0] + add $T1,$T1,$t0 + eor $t1,$t1,$t2,ror#$sigma1[1] + add $T1,$T1,$inp + eor $t1,$t1,$t2,lsr#$sigma1[2] @ sigma1(X[i+14]) + add $T1,$T1,$t1 +___ + &BODY_00_15(@_); +} + +$code=<<___; +.text +.code 32 + +.type K256,%object +.align 5 +K256: +.word 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 +.word 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 +.word 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 +.word 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 +.word 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc +.word 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da +.word 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 +.word 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 +.word 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 +.word 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 +.word 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 +.word 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 +.word 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 +.word 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 +.word 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 +.word 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 +.size K256,.-K256 + +.global sha256_block_data_order +.type sha256_block_data_order,%function +sha256_block_data_order: + sub r3,pc,#8 @ sha256_block_data_order + add $len,$inp,$len,lsl#6 @ len to point at the end of inp + stmdb sp!,{$ctx,$inp,$len,r4-r12,lr} + ldmia $ctx,{$A,$B,$C,$D,$E,$F,$G,$H} + sub $Ktbl,r3,#256 @ K256 + sub sp,sp,#16*4 @ alloca(X[16]) +.Loop: +___ +for($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } +$code.=".Lrounds_16_xx:\n"; +for (;$i<32;$i++) { &BODY_16_XX($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + and $t2,$t2,#0xff + cmp $t2,#0xf2 + bne .Lrounds_16_xx + + ldr $T1,[sp,#16*4] @ pull ctx + ldr $t0,[$T1,#0] + ldr $t1,[$T1,#4] + ldr $t2,[$T1,#8] + add $A,$A,$t0 + ldr $t0,[$T1,#12] + add $B,$B,$t1 + ldr $t1,[$T1,#16] + add $C,$C,$t2 + ldr $t2,[$T1,#20] + add $D,$D,$t0 + ldr $t0,[$T1,#24] + add $E,$E,$t1 + ldr $t1,[$T1,#28] + add $F,$F,$t2 + ldr $inp,[sp,#17*4] @ pull inp + ldr $t2,[sp,#18*4] @ pull inp+len + add $G,$G,$t0 + add $H,$H,$t1 + stmia $T1,{$A,$B,$C,$D,$E,$F,$G,$H} + cmp $inp,$t2 + sub $Ktbl,$Ktbl,#256 @ rewind Ktbl + bne .Loop + + add sp,sp,#`16+3`*4 @ destroy frame + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + bx lr @ interoperable with Thumb ISA:-) +.size sha256_block_data_order,.-sha256_block_data_order +.asciz "SHA256 block transform for ARMv4, CRYPTOGAMS by <appro\@openssl.org>" +.align 2 +___ + +$code =~ s/\`([^\`]*)\`/eval $1/gem; +$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm; # make it possible to compile with -march=armv4 +print $code; +close STDOUT; # enforce flush diff --git a/app/openssl/crypto/sha/asm/sha256-armv4.s b/app/openssl/crypto/sha/asm/sha256-armv4.s new file mode 100644 index 00000000..ee903dc4 --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha256-armv4.s @@ -0,0 +1,1111 @@ +.text +.code 32 + +.type K256,%object +.align 5 +K256: +.word 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 +.word 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 +.word 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 +.word 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 +.word 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc +.word 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da +.word 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 +.word 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 +.word 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 +.word 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 +.word 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 +.word 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 +.word 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 +.word 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 +.word 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 +.word 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 +.size K256,.-K256 + +.global sha256_block_data_order +.type sha256_block_data_order,%function +sha256_block_data_order: + sub r3,pc,#8 @ sha256_block_data_order + add r2,r1,r2,lsl#6 @ len to point at the end of inp + stmdb sp!,{r0,r1,r2,r4-r12,lr} + ldmia r0,{r4,r5,r6,r7,r8,r9,r10,r11} + sub r14,r3,#256 @ K256 + sub sp,sp,#16*4 @ alloca(X[16]) +.Loop: + ldrb r3,[r1,#3] @ 0 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r8,ror#6 + str r3,[sp,#0*4] + eor r0,r0,r8,ror#11 + eor r2,r9,r10 + eor r0,r0,r8,ror#25 @ Sigma1(e) + and r2,r2,r8 + add r3,r3,r0 + eor r2,r2,r10 @ Ch(e,f,g) + add r3,r3,r11 + mov r11,r4,ror#2 + add r3,r3,r2 + eor r11,r11,r4,ror#13 + add r3,r3,r12 + eor r11,r11,r4,ror#22 @ Sigma0(a) + orr r0,r4,r5 + and r2,r4,r5 + and r0,r0,r6 + add r11,r11,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r7,r7,r3 + add r11,r11,r0 + ldrb r3,[r1,#3] @ 1 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r7,ror#6 + str r3,[sp,#1*4] + eor r0,r0,r7,ror#11 + eor r2,r8,r9 + eor r0,r0,r7,ror#25 @ Sigma1(e) + and r2,r2,r7 + add r3,r3,r0 + eor r2,r2,r9 @ Ch(e,f,g) + add r3,r3,r10 + mov r10,r11,ror#2 + add r3,r3,r2 + eor r10,r10,r11,ror#13 + add r3,r3,r12 + eor r10,r10,r11,ror#22 @ Sigma0(a) + orr r0,r11,r4 + and r2,r11,r4 + and r0,r0,r5 + add r10,r10,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r6,r6,r3 + add r10,r10,r0 + ldrb r3,[r1,#3] @ 2 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r6,ror#6 + str r3,[sp,#2*4] + eor r0,r0,r6,ror#11 + eor r2,r7,r8 + eor r0,r0,r6,ror#25 @ Sigma1(e) + and r2,r2,r6 + add r3,r3,r0 + eor r2,r2,r8 @ Ch(e,f,g) + add r3,r3,r9 + mov r9,r10,ror#2 + add r3,r3,r2 + eor r9,r9,r10,ror#13 + add r3,r3,r12 + eor r9,r9,r10,ror#22 @ Sigma0(a) + orr r0,r10,r11 + and r2,r10,r11 + and r0,r0,r4 + add r9,r9,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r5,r5,r3 + add r9,r9,r0 + ldrb r3,[r1,#3] @ 3 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r5,ror#6 + str r3,[sp,#3*4] + eor r0,r0,r5,ror#11 + eor r2,r6,r7 + eor r0,r0,r5,ror#25 @ Sigma1(e) + and r2,r2,r5 + add r3,r3,r0 + eor r2,r2,r7 @ Ch(e,f,g) + add r3,r3,r8 + mov r8,r9,ror#2 + add r3,r3,r2 + eor r8,r8,r9,ror#13 + add r3,r3,r12 + eor r8,r8,r9,ror#22 @ Sigma0(a) + orr r0,r9,r10 + and r2,r9,r10 + and r0,r0,r11 + add r8,r8,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r4,r4,r3 + add r8,r8,r0 + ldrb r3,[r1,#3] @ 4 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r4,ror#6 + str r3,[sp,#4*4] + eor r0,r0,r4,ror#11 + eor r2,r5,r6 + eor r0,r0,r4,ror#25 @ Sigma1(e) + and r2,r2,r4 + add r3,r3,r0 + eor r2,r2,r6 @ Ch(e,f,g) + add r3,r3,r7 + mov r7,r8,ror#2 + add r3,r3,r2 + eor r7,r7,r8,ror#13 + add r3,r3,r12 + eor r7,r7,r8,ror#22 @ Sigma0(a) + orr r0,r8,r9 + and r2,r8,r9 + and r0,r0,r10 + add r7,r7,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r11,r11,r3 + add r7,r7,r0 + ldrb r3,[r1,#3] @ 5 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r11,ror#6 + str r3,[sp,#5*4] + eor r0,r0,r11,ror#11 + eor r2,r4,r5 + eor r0,r0,r11,ror#25 @ Sigma1(e) + and r2,r2,r11 + add r3,r3,r0 + eor r2,r2,r5 @ Ch(e,f,g) + add r3,r3,r6 + mov r6,r7,ror#2 + add r3,r3,r2 + eor r6,r6,r7,ror#13 + add r3,r3,r12 + eor r6,r6,r7,ror#22 @ Sigma0(a) + orr r0,r7,r8 + and r2,r7,r8 + and r0,r0,r9 + add r6,r6,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r10,r10,r3 + add r6,r6,r0 + ldrb r3,[r1,#3] @ 6 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r10,ror#6 + str r3,[sp,#6*4] + eor r0,r0,r10,ror#11 + eor r2,r11,r4 + eor r0,r0,r10,ror#25 @ Sigma1(e) + and r2,r2,r10 + add r3,r3,r0 + eor r2,r2,r4 @ Ch(e,f,g) + add r3,r3,r5 + mov r5,r6,ror#2 + add r3,r3,r2 + eor r5,r5,r6,ror#13 + add r3,r3,r12 + eor r5,r5,r6,ror#22 @ Sigma0(a) + orr r0,r6,r7 + and r2,r6,r7 + and r0,r0,r8 + add r5,r5,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r9,r9,r3 + add r5,r5,r0 + ldrb r3,[r1,#3] @ 7 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r9,ror#6 + str r3,[sp,#7*4] + eor r0,r0,r9,ror#11 + eor r2,r10,r11 + eor r0,r0,r9,ror#25 @ Sigma1(e) + and r2,r2,r9 + add r3,r3,r0 + eor r2,r2,r11 @ Ch(e,f,g) + add r3,r3,r4 + mov r4,r5,ror#2 + add r3,r3,r2 + eor r4,r4,r5,ror#13 + add r3,r3,r12 + eor r4,r4,r5,ror#22 @ Sigma0(a) + orr r0,r5,r6 + and r2,r5,r6 + and r0,r0,r7 + add r4,r4,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r8,r8,r3 + add r4,r4,r0 + ldrb r3,[r1,#3] @ 8 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r8,ror#6 + str r3,[sp,#8*4] + eor r0,r0,r8,ror#11 + eor r2,r9,r10 + eor r0,r0,r8,ror#25 @ Sigma1(e) + and r2,r2,r8 + add r3,r3,r0 + eor r2,r2,r10 @ Ch(e,f,g) + add r3,r3,r11 + mov r11,r4,ror#2 + add r3,r3,r2 + eor r11,r11,r4,ror#13 + add r3,r3,r12 + eor r11,r11,r4,ror#22 @ Sigma0(a) + orr r0,r4,r5 + and r2,r4,r5 + and r0,r0,r6 + add r11,r11,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r7,r7,r3 + add r11,r11,r0 + ldrb r3,[r1,#3] @ 9 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r7,ror#6 + str r3,[sp,#9*4] + eor r0,r0,r7,ror#11 + eor r2,r8,r9 + eor r0,r0,r7,ror#25 @ Sigma1(e) + and r2,r2,r7 + add r3,r3,r0 + eor r2,r2,r9 @ Ch(e,f,g) + add r3,r3,r10 + mov r10,r11,ror#2 + add r3,r3,r2 + eor r10,r10,r11,ror#13 + add r3,r3,r12 + eor r10,r10,r11,ror#22 @ Sigma0(a) + orr r0,r11,r4 + and r2,r11,r4 + and r0,r0,r5 + add r10,r10,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r6,r6,r3 + add r10,r10,r0 + ldrb r3,[r1,#3] @ 10 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r6,ror#6 + str r3,[sp,#10*4] + eor r0,r0,r6,ror#11 + eor r2,r7,r8 + eor r0,r0,r6,ror#25 @ Sigma1(e) + and r2,r2,r6 + add r3,r3,r0 + eor r2,r2,r8 @ Ch(e,f,g) + add r3,r3,r9 + mov r9,r10,ror#2 + add r3,r3,r2 + eor r9,r9,r10,ror#13 + add r3,r3,r12 + eor r9,r9,r10,ror#22 @ Sigma0(a) + orr r0,r10,r11 + and r2,r10,r11 + and r0,r0,r4 + add r9,r9,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r5,r5,r3 + add r9,r9,r0 + ldrb r3,[r1,#3] @ 11 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r5,ror#6 + str r3,[sp,#11*4] + eor r0,r0,r5,ror#11 + eor r2,r6,r7 + eor r0,r0,r5,ror#25 @ Sigma1(e) + and r2,r2,r5 + add r3,r3,r0 + eor r2,r2,r7 @ Ch(e,f,g) + add r3,r3,r8 + mov r8,r9,ror#2 + add r3,r3,r2 + eor r8,r8,r9,ror#13 + add r3,r3,r12 + eor r8,r8,r9,ror#22 @ Sigma0(a) + orr r0,r9,r10 + and r2,r9,r10 + and r0,r0,r11 + add r8,r8,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r4,r4,r3 + add r8,r8,r0 + ldrb r3,[r1,#3] @ 12 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r4,ror#6 + str r3,[sp,#12*4] + eor r0,r0,r4,ror#11 + eor r2,r5,r6 + eor r0,r0,r4,ror#25 @ Sigma1(e) + and r2,r2,r4 + add r3,r3,r0 + eor r2,r2,r6 @ Ch(e,f,g) + add r3,r3,r7 + mov r7,r8,ror#2 + add r3,r3,r2 + eor r7,r7,r8,ror#13 + add r3,r3,r12 + eor r7,r7,r8,ror#22 @ Sigma0(a) + orr r0,r8,r9 + and r2,r8,r9 + and r0,r0,r10 + add r7,r7,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r11,r11,r3 + add r7,r7,r0 + ldrb r3,[r1,#3] @ 13 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r11,ror#6 + str r3,[sp,#13*4] + eor r0,r0,r11,ror#11 + eor r2,r4,r5 + eor r0,r0,r11,ror#25 @ Sigma1(e) + and r2,r2,r11 + add r3,r3,r0 + eor r2,r2,r5 @ Ch(e,f,g) + add r3,r3,r6 + mov r6,r7,ror#2 + add r3,r3,r2 + eor r6,r6,r7,ror#13 + add r3,r3,r12 + eor r6,r6,r7,ror#22 @ Sigma0(a) + orr r0,r7,r8 + and r2,r7,r8 + and r0,r0,r9 + add r6,r6,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r10,r10,r3 + add r6,r6,r0 + ldrb r3,[r1,#3] @ 14 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + + ldr r12,[r14],#4 @ *K256++ + mov r0,r10,ror#6 + str r3,[sp,#14*4] + eor r0,r0,r10,ror#11 + eor r2,r11,r4 + eor r0,r0,r10,ror#25 @ Sigma1(e) + and r2,r2,r10 + add r3,r3,r0 + eor r2,r2,r4 @ Ch(e,f,g) + add r3,r3,r5 + mov r5,r6,ror#2 + add r3,r3,r2 + eor r5,r5,r6,ror#13 + add r3,r3,r12 + eor r5,r5,r6,ror#22 @ Sigma0(a) + orr r0,r6,r7 + and r2,r6,r7 + and r0,r0,r8 + add r5,r5,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r9,r9,r3 + add r5,r5,r0 + ldrb r3,[r1,#3] @ 15 + ldrb r12,[r1,#2] + ldrb r2,[r1,#1] + ldrb r0,[r1],#4 + orr r3,r3,r12,lsl#8 + orr r3,r3,r2,lsl#16 + orr r3,r3,r0,lsl#24 + str r1,[sp,#17*4] + ldr r12,[r14],#4 @ *K256++ + mov r0,r9,ror#6 + str r3,[sp,#15*4] + eor r0,r0,r9,ror#11 + eor r2,r10,r11 + eor r0,r0,r9,ror#25 @ Sigma1(e) + and r2,r2,r9 + add r3,r3,r0 + eor r2,r2,r11 @ Ch(e,f,g) + add r3,r3,r4 + mov r4,r5,ror#2 + add r3,r3,r2 + eor r4,r4,r5,ror#13 + add r3,r3,r12 + eor r4,r4,r5,ror#22 @ Sigma0(a) + orr r0,r5,r6 + and r2,r5,r6 + and r0,r0,r7 + add r4,r4,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r8,r8,r3 + add r4,r4,r0 +.Lrounds_16_xx: + ldr r2,[sp,#1*4] @ 16 + ldr r12,[sp,#14*4] + ldr r3,[sp,#0*4] + mov r0,r2,ror#7 + ldr r1,[sp,#9*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r8,ror#6 + str r3,[sp,#0*4] + eor r0,r0,r8,ror#11 + eor r2,r9,r10 + eor r0,r0,r8,ror#25 @ Sigma1(e) + and r2,r2,r8 + add r3,r3,r0 + eor r2,r2,r10 @ Ch(e,f,g) + add r3,r3,r11 + mov r11,r4,ror#2 + add r3,r3,r2 + eor r11,r11,r4,ror#13 + add r3,r3,r12 + eor r11,r11,r4,ror#22 @ Sigma0(a) + orr r0,r4,r5 + and r2,r4,r5 + and r0,r0,r6 + add r11,r11,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r7,r7,r3 + add r11,r11,r0 + ldr r2,[sp,#2*4] @ 17 + ldr r12,[sp,#15*4] + ldr r3,[sp,#1*4] + mov r0,r2,ror#7 + ldr r1,[sp,#10*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r7,ror#6 + str r3,[sp,#1*4] + eor r0,r0,r7,ror#11 + eor r2,r8,r9 + eor r0,r0,r7,ror#25 @ Sigma1(e) + and r2,r2,r7 + add r3,r3,r0 + eor r2,r2,r9 @ Ch(e,f,g) + add r3,r3,r10 + mov r10,r11,ror#2 + add r3,r3,r2 + eor r10,r10,r11,ror#13 + add r3,r3,r12 + eor r10,r10,r11,ror#22 @ Sigma0(a) + orr r0,r11,r4 + and r2,r11,r4 + and r0,r0,r5 + add r10,r10,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r6,r6,r3 + add r10,r10,r0 + ldr r2,[sp,#3*4] @ 18 + ldr r12,[sp,#0*4] + ldr r3,[sp,#2*4] + mov r0,r2,ror#7 + ldr r1,[sp,#11*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r6,ror#6 + str r3,[sp,#2*4] + eor r0,r0,r6,ror#11 + eor r2,r7,r8 + eor r0,r0,r6,ror#25 @ Sigma1(e) + and r2,r2,r6 + add r3,r3,r0 + eor r2,r2,r8 @ Ch(e,f,g) + add r3,r3,r9 + mov r9,r10,ror#2 + add r3,r3,r2 + eor r9,r9,r10,ror#13 + add r3,r3,r12 + eor r9,r9,r10,ror#22 @ Sigma0(a) + orr r0,r10,r11 + and r2,r10,r11 + and r0,r0,r4 + add r9,r9,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r5,r5,r3 + add r9,r9,r0 + ldr r2,[sp,#4*4] @ 19 + ldr r12,[sp,#1*4] + ldr r3,[sp,#3*4] + mov r0,r2,ror#7 + ldr r1,[sp,#12*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r5,ror#6 + str r3,[sp,#3*4] + eor r0,r0,r5,ror#11 + eor r2,r6,r7 + eor r0,r0,r5,ror#25 @ Sigma1(e) + and r2,r2,r5 + add r3,r3,r0 + eor r2,r2,r7 @ Ch(e,f,g) + add r3,r3,r8 + mov r8,r9,ror#2 + add r3,r3,r2 + eor r8,r8,r9,ror#13 + add r3,r3,r12 + eor r8,r8,r9,ror#22 @ Sigma0(a) + orr r0,r9,r10 + and r2,r9,r10 + and r0,r0,r11 + add r8,r8,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r4,r4,r3 + add r8,r8,r0 + ldr r2,[sp,#5*4] @ 20 + ldr r12,[sp,#2*4] + ldr r3,[sp,#4*4] + mov r0,r2,ror#7 + ldr r1,[sp,#13*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r4,ror#6 + str r3,[sp,#4*4] + eor r0,r0,r4,ror#11 + eor r2,r5,r6 + eor r0,r0,r4,ror#25 @ Sigma1(e) + and r2,r2,r4 + add r3,r3,r0 + eor r2,r2,r6 @ Ch(e,f,g) + add r3,r3,r7 + mov r7,r8,ror#2 + add r3,r3,r2 + eor r7,r7,r8,ror#13 + add r3,r3,r12 + eor r7,r7,r8,ror#22 @ Sigma0(a) + orr r0,r8,r9 + and r2,r8,r9 + and r0,r0,r10 + add r7,r7,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r11,r11,r3 + add r7,r7,r0 + ldr r2,[sp,#6*4] @ 21 + ldr r12,[sp,#3*4] + ldr r3,[sp,#5*4] + mov r0,r2,ror#7 + ldr r1,[sp,#14*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r11,ror#6 + str r3,[sp,#5*4] + eor r0,r0,r11,ror#11 + eor r2,r4,r5 + eor r0,r0,r11,ror#25 @ Sigma1(e) + and r2,r2,r11 + add r3,r3,r0 + eor r2,r2,r5 @ Ch(e,f,g) + add r3,r3,r6 + mov r6,r7,ror#2 + add r3,r3,r2 + eor r6,r6,r7,ror#13 + add r3,r3,r12 + eor r6,r6,r7,ror#22 @ Sigma0(a) + orr r0,r7,r8 + and r2,r7,r8 + and r0,r0,r9 + add r6,r6,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r10,r10,r3 + add r6,r6,r0 + ldr r2,[sp,#7*4] @ 22 + ldr r12,[sp,#4*4] + ldr r3,[sp,#6*4] + mov r0,r2,ror#7 + ldr r1,[sp,#15*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r10,ror#6 + str r3,[sp,#6*4] + eor r0,r0,r10,ror#11 + eor r2,r11,r4 + eor r0,r0,r10,ror#25 @ Sigma1(e) + and r2,r2,r10 + add r3,r3,r0 + eor r2,r2,r4 @ Ch(e,f,g) + add r3,r3,r5 + mov r5,r6,ror#2 + add r3,r3,r2 + eor r5,r5,r6,ror#13 + add r3,r3,r12 + eor r5,r5,r6,ror#22 @ Sigma0(a) + orr r0,r6,r7 + and r2,r6,r7 + and r0,r0,r8 + add r5,r5,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r9,r9,r3 + add r5,r5,r0 + ldr r2,[sp,#8*4] @ 23 + ldr r12,[sp,#5*4] + ldr r3,[sp,#7*4] + mov r0,r2,ror#7 + ldr r1,[sp,#0*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r9,ror#6 + str r3,[sp,#7*4] + eor r0,r0,r9,ror#11 + eor r2,r10,r11 + eor r0,r0,r9,ror#25 @ Sigma1(e) + and r2,r2,r9 + add r3,r3,r0 + eor r2,r2,r11 @ Ch(e,f,g) + add r3,r3,r4 + mov r4,r5,ror#2 + add r3,r3,r2 + eor r4,r4,r5,ror#13 + add r3,r3,r12 + eor r4,r4,r5,ror#22 @ Sigma0(a) + orr r0,r5,r6 + and r2,r5,r6 + and r0,r0,r7 + add r4,r4,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r8,r8,r3 + add r4,r4,r0 + ldr r2,[sp,#9*4] @ 24 + ldr r12,[sp,#6*4] + ldr r3,[sp,#8*4] + mov r0,r2,ror#7 + ldr r1,[sp,#1*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r8,ror#6 + str r3,[sp,#8*4] + eor r0,r0,r8,ror#11 + eor r2,r9,r10 + eor r0,r0,r8,ror#25 @ Sigma1(e) + and r2,r2,r8 + add r3,r3,r0 + eor r2,r2,r10 @ Ch(e,f,g) + add r3,r3,r11 + mov r11,r4,ror#2 + add r3,r3,r2 + eor r11,r11,r4,ror#13 + add r3,r3,r12 + eor r11,r11,r4,ror#22 @ Sigma0(a) + orr r0,r4,r5 + and r2,r4,r5 + and r0,r0,r6 + add r11,r11,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r7,r7,r3 + add r11,r11,r0 + ldr r2,[sp,#10*4] @ 25 + ldr r12,[sp,#7*4] + ldr r3,[sp,#9*4] + mov r0,r2,ror#7 + ldr r1,[sp,#2*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r7,ror#6 + str r3,[sp,#9*4] + eor r0,r0,r7,ror#11 + eor r2,r8,r9 + eor r0,r0,r7,ror#25 @ Sigma1(e) + and r2,r2,r7 + add r3,r3,r0 + eor r2,r2,r9 @ Ch(e,f,g) + add r3,r3,r10 + mov r10,r11,ror#2 + add r3,r3,r2 + eor r10,r10,r11,ror#13 + add r3,r3,r12 + eor r10,r10,r11,ror#22 @ Sigma0(a) + orr r0,r11,r4 + and r2,r11,r4 + and r0,r0,r5 + add r10,r10,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r6,r6,r3 + add r10,r10,r0 + ldr r2,[sp,#11*4] @ 26 + ldr r12,[sp,#8*4] + ldr r3,[sp,#10*4] + mov r0,r2,ror#7 + ldr r1,[sp,#3*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r6,ror#6 + str r3,[sp,#10*4] + eor r0,r0,r6,ror#11 + eor r2,r7,r8 + eor r0,r0,r6,ror#25 @ Sigma1(e) + and r2,r2,r6 + add r3,r3,r0 + eor r2,r2,r8 @ Ch(e,f,g) + add r3,r3,r9 + mov r9,r10,ror#2 + add r3,r3,r2 + eor r9,r9,r10,ror#13 + add r3,r3,r12 + eor r9,r9,r10,ror#22 @ Sigma0(a) + orr r0,r10,r11 + and r2,r10,r11 + and r0,r0,r4 + add r9,r9,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r5,r5,r3 + add r9,r9,r0 + ldr r2,[sp,#12*4] @ 27 + ldr r12,[sp,#9*4] + ldr r3,[sp,#11*4] + mov r0,r2,ror#7 + ldr r1,[sp,#4*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r5,ror#6 + str r3,[sp,#11*4] + eor r0,r0,r5,ror#11 + eor r2,r6,r7 + eor r0,r0,r5,ror#25 @ Sigma1(e) + and r2,r2,r5 + add r3,r3,r0 + eor r2,r2,r7 @ Ch(e,f,g) + add r3,r3,r8 + mov r8,r9,ror#2 + add r3,r3,r2 + eor r8,r8,r9,ror#13 + add r3,r3,r12 + eor r8,r8,r9,ror#22 @ Sigma0(a) + orr r0,r9,r10 + and r2,r9,r10 + and r0,r0,r11 + add r8,r8,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r4,r4,r3 + add r8,r8,r0 + ldr r2,[sp,#13*4] @ 28 + ldr r12,[sp,#10*4] + ldr r3,[sp,#12*4] + mov r0,r2,ror#7 + ldr r1,[sp,#5*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r4,ror#6 + str r3,[sp,#12*4] + eor r0,r0,r4,ror#11 + eor r2,r5,r6 + eor r0,r0,r4,ror#25 @ Sigma1(e) + and r2,r2,r4 + add r3,r3,r0 + eor r2,r2,r6 @ Ch(e,f,g) + add r3,r3,r7 + mov r7,r8,ror#2 + add r3,r3,r2 + eor r7,r7,r8,ror#13 + add r3,r3,r12 + eor r7,r7,r8,ror#22 @ Sigma0(a) + orr r0,r8,r9 + and r2,r8,r9 + and r0,r0,r10 + add r7,r7,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r11,r11,r3 + add r7,r7,r0 + ldr r2,[sp,#14*4] @ 29 + ldr r12,[sp,#11*4] + ldr r3,[sp,#13*4] + mov r0,r2,ror#7 + ldr r1,[sp,#6*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r11,ror#6 + str r3,[sp,#13*4] + eor r0,r0,r11,ror#11 + eor r2,r4,r5 + eor r0,r0,r11,ror#25 @ Sigma1(e) + and r2,r2,r11 + add r3,r3,r0 + eor r2,r2,r5 @ Ch(e,f,g) + add r3,r3,r6 + mov r6,r7,ror#2 + add r3,r3,r2 + eor r6,r6,r7,ror#13 + add r3,r3,r12 + eor r6,r6,r7,ror#22 @ Sigma0(a) + orr r0,r7,r8 + and r2,r7,r8 + and r0,r0,r9 + add r6,r6,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r10,r10,r3 + add r6,r6,r0 + ldr r2,[sp,#15*4] @ 30 + ldr r12,[sp,#12*4] + ldr r3,[sp,#14*4] + mov r0,r2,ror#7 + ldr r1,[sp,#7*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r10,ror#6 + str r3,[sp,#14*4] + eor r0,r0,r10,ror#11 + eor r2,r11,r4 + eor r0,r0,r10,ror#25 @ Sigma1(e) + and r2,r2,r10 + add r3,r3,r0 + eor r2,r2,r4 @ Ch(e,f,g) + add r3,r3,r5 + mov r5,r6,ror#2 + add r3,r3,r2 + eor r5,r5,r6,ror#13 + add r3,r3,r12 + eor r5,r5,r6,ror#22 @ Sigma0(a) + orr r0,r6,r7 + and r2,r6,r7 + and r0,r0,r8 + add r5,r5,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r9,r9,r3 + add r5,r5,r0 + ldr r2,[sp,#0*4] @ 31 + ldr r12,[sp,#13*4] + ldr r3,[sp,#15*4] + mov r0,r2,ror#7 + ldr r1,[sp,#8*4] + eor r0,r0,r2,ror#18 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + mov r2,r12,ror#17 + add r3,r3,r0 + eor r2,r2,r12,ror#19 + add r3,r3,r1 + eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) + add r3,r3,r2 + ldr r12,[r14],#4 @ *K256++ + mov r0,r9,ror#6 + str r3,[sp,#15*4] + eor r0,r0,r9,ror#11 + eor r2,r10,r11 + eor r0,r0,r9,ror#25 @ Sigma1(e) + and r2,r2,r9 + add r3,r3,r0 + eor r2,r2,r11 @ Ch(e,f,g) + add r3,r3,r4 + mov r4,r5,ror#2 + add r3,r3,r2 + eor r4,r4,r5,ror#13 + add r3,r3,r12 + eor r4,r4,r5,ror#22 @ Sigma0(a) + orr r0,r5,r6 + and r2,r5,r6 + and r0,r0,r7 + add r4,r4,r3 + orr r0,r0,r2 @ Maj(a,b,c) + add r8,r8,r3 + add r4,r4,r0 + and r12,r12,#0xff + cmp r12,#0xf2 + bne .Lrounds_16_xx + + ldr r3,[sp,#16*4] @ pull ctx + ldr r0,[r3,#0] + ldr r2,[r3,#4] + ldr r12,[r3,#8] + add r4,r4,r0 + ldr r0,[r3,#12] + add r5,r5,r2 + ldr r2,[r3,#16] + add r6,r6,r12 + ldr r12,[r3,#20] + add r7,r7,r0 + ldr r0,[r3,#24] + add r8,r8,r2 + ldr r2,[r3,#28] + add r9,r9,r12 + ldr r1,[sp,#17*4] @ pull inp + ldr r12,[sp,#18*4] @ pull inp+len + add r10,r10,r0 + add r11,r11,r2 + stmia r3,{r4,r5,r6,r7,r8,r9,r10,r11} + cmp r1,r12 + sub r14,r14,#256 @ rewind Ktbl + bne .Loop + + add sp,sp,#19*4 @ destroy frame + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +.size sha256_block_data_order,.-sha256_block_data_order +.asciz "SHA256 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>" +.align 2 diff --git a/app/openssl/crypto/sha/asm/sha512-586.pl b/app/openssl/crypto/sha/asm/sha512-586.pl new file mode 100644 index 00000000..5b9f3337 --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha512-586.pl @@ -0,0 +1,644 @@ +#!/usr/bin/env perl +# +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== +# +# SHA512 block transform for x86. September 2007. +# +# Performance in clock cycles per processed byte (less is better): +# +# Pentium PIII P4 AMD K8 Core2 +# gcc 100 75 116 54 66 +# icc 97 77 95 55 57 +# x86 asm 61 56 82 36 40 +# SSE2 asm - - 38 24 20 +# x86_64 asm(*) - - 30 10.0 10.5 +# +# (*) x86_64 assembler performance is presented for reference +# purposes. +# +# IALU code-path is optimized for elder Pentiums. On vanilla Pentium +# performance improvement over compiler generated code reaches ~60%, +# while on PIII - ~35%. On newer µ-archs improvement varies from 15% +# to 50%, but it's less important as they are expected to execute SSE2 +# code-path, which is commonly ~2-3x faster [than compiler generated +# code]. SSE2 code-path is as fast as original sha512-sse2.pl, even +# though it does not use 128-bit operations. The latter means that +# SSE2-aware kernel is no longer required to execute the code. Another +# difference is that new code optimizes amount of writes, but at the +# cost of increased data cache "footprint" by 1/2KB. + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +push(@INC,"${dir}","${dir}../../perlasm"); +require "x86asm.pl"; + +&asm_init($ARGV[0],"sha512-586.pl",$ARGV[$#ARGV] eq "386"); + +$sse2=0; +for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); } + +&external_label("OPENSSL_ia32cap_P") if ($sse2); + +$Tlo=&DWP(0,"esp"); $Thi=&DWP(4,"esp"); +$Alo=&DWP(8,"esp"); $Ahi=&DWP(8+4,"esp"); +$Blo=&DWP(16,"esp"); $Bhi=&DWP(16+4,"esp"); +$Clo=&DWP(24,"esp"); $Chi=&DWP(24+4,"esp"); +$Dlo=&DWP(32,"esp"); $Dhi=&DWP(32+4,"esp"); +$Elo=&DWP(40,"esp"); $Ehi=&DWP(40+4,"esp"); +$Flo=&DWP(48,"esp"); $Fhi=&DWP(48+4,"esp"); +$Glo=&DWP(56,"esp"); $Ghi=&DWP(56+4,"esp"); +$Hlo=&DWP(64,"esp"); $Hhi=&DWP(64+4,"esp"); +$K512="ebp"; + +$Asse2=&QWP(0,"esp"); +$Bsse2=&QWP(8,"esp"); +$Csse2=&QWP(16,"esp"); +$Dsse2=&QWP(24,"esp"); +$Esse2=&QWP(32,"esp"); +$Fsse2=&QWP(40,"esp"); +$Gsse2=&QWP(48,"esp"); +$Hsse2=&QWP(56,"esp"); + +$A="mm0"; # B-D and +$E="mm4"; # F-H are commonly loaded to respectively mm1-mm3 and + # mm5-mm7, but it's done on on-demand basis... + +sub BODY_00_15_sse2 { + my $prefetch=shift; + + &movq ("mm5",$Fsse2); # load f + &movq ("mm6",$Gsse2); # load g + &movq ("mm7",$Hsse2); # load h + + &movq ("mm1",$E); # %mm1 is sliding right + &movq ("mm2",$E); # %mm2 is sliding left + &psrlq ("mm1",14); + &movq ($Esse2,$E); # modulo-scheduled save e + &psllq ("mm2",23); + &movq ("mm3","mm1"); # %mm3 is T1 + &psrlq ("mm1",4); + &pxor ("mm3","mm2"); + &psllq ("mm2",23); + &pxor ("mm3","mm1"); + &psrlq ("mm1",23); + &pxor ("mm3","mm2"); + &psllq ("mm2",4); + &pxor ("mm3","mm1"); + &paddq ("mm7",QWP(0,$K512)); # h+=K512[i] + &pxor ("mm3","mm2"); # T1=Sigma1_512(e) + + &pxor ("mm5","mm6"); # f^=g + &movq ("mm1",$Bsse2); # load b + &pand ("mm5",$E); # f&=e + &movq ("mm2",$Csse2); # load c + &pxor ("mm5","mm6"); # f^=g + &movq ($E,$Dsse2); # e = load d + &paddq ("mm3","mm5"); # T1+=Ch(e,f,g) + &movq (&QWP(0,"esp"),$A); # modulo-scheduled save a + &paddq ("mm3","mm7"); # T1+=h + + &movq ("mm5",$A); # %mm5 is sliding right + &movq ("mm6",$A); # %mm6 is sliding left + &paddq ("mm3",&QWP(8*9,"esp")); # T1+=X[0] + &psrlq ("mm5",28); + &paddq ($E,"mm3"); # e += T1 + &psllq ("mm6",25); + &movq ("mm7","mm5"); # %mm7 is T2 + &psrlq ("mm5",6); + &pxor ("mm7","mm6"); + &psllq ("mm6",5); + &pxor ("mm7","mm5"); + &psrlq ("mm5",5); + &pxor ("mm7","mm6"); + &psllq ("mm6",6); + &pxor ("mm7","mm5"); + &sub ("esp",8); + &pxor ("mm7","mm6"); # T2=Sigma0_512(a) + + &movq ("mm5",$A); # %mm5=a + &por ($A,"mm2"); # a=a|c + &movq ("mm6",&QWP(8*(9+16-14),"esp")) if ($prefetch); + &pand ("mm5","mm2"); # %mm5=a&c + &pand ($A,"mm1"); # a=(a|c)&b + &movq ("mm2",&QWP(8*(9+16-1),"esp")) if ($prefetch); + &por ("mm5",$A); # %mm5=(a&c)|((a|c)&b) + &paddq ("mm7","mm5"); # T2+=Maj(a,b,c) + &movq ($A,"mm3"); # a=T1 + + &mov (&LB("edx"),&BP(0,$K512)); + &paddq ($A,"mm7"); # a+=T2 + &add ($K512,8); +} + +sub BODY_00_15_x86 { + #define Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) + # LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23 + # HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23 + &mov ("ecx",$Elo); + &mov ("edx",$Ehi); + &mov ("esi","ecx"); + + &shr ("ecx",9) # lo>>9 + &mov ("edi","edx"); + &shr ("edx",9) # hi>>9 + &mov ("ebx","ecx"); + &shl ("esi",14); # lo<<14 + &mov ("eax","edx"); + &shl ("edi",14); # hi<<14 + &xor ("ebx","esi"); + + &shr ("ecx",14-9); # lo>>14 + &xor ("eax","edi"); + &shr ("edx",14-9); # hi>>14 + &xor ("eax","ecx"); + &shl ("esi",18-14); # lo<<18 + &xor ("ebx","edx"); + &shl ("edi",18-14); # hi<<18 + &xor ("ebx","esi"); + + &shr ("ecx",18-14); # lo>>18 + &xor ("eax","edi"); + &shr ("edx",18-14); # hi>>18 + &xor ("eax","ecx"); + &shl ("esi",23-18); # lo<<23 + &xor ("ebx","edx"); + &shl ("edi",23-18); # hi<<23 + &xor ("eax","esi"); + &xor ("ebx","edi"); # T1 = Sigma1(e) + + &mov ("ecx",$Flo); + &mov ("edx",$Fhi); + &mov ("esi",$Glo); + &mov ("edi",$Ghi); + &add ("eax",$Hlo); + &adc ("ebx",$Hhi); # T1 += h + &xor ("ecx","esi"); + &xor ("edx","edi"); + &and ("ecx",$Elo); + &and ("edx",$Ehi); + &add ("eax",&DWP(8*(9+15)+0,"esp")); + &adc ("ebx",&DWP(8*(9+15)+4,"esp")); # T1 += X[0] + &xor ("ecx","esi"); + &xor ("edx","edi"); # Ch(e,f,g) = (f^g)&e)^g + + &mov ("esi",&DWP(0,$K512)); + &mov ("edi",&DWP(4,$K512)); # K[i] + &add ("eax","ecx"); + &adc ("ebx","edx"); # T1 += Ch(e,f,g) + &mov ("ecx",$Dlo); + &mov ("edx",$Dhi); + &add ("eax","esi"); + &adc ("ebx","edi"); # T1 += K[i] + &mov ($Tlo,"eax"); + &mov ($Thi,"ebx"); # put T1 away + &add ("eax","ecx"); + &adc ("ebx","edx"); # d += T1 + + #define Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) + # LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25 + # HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25 + &mov ("ecx",$Alo); + &mov ("edx",$Ahi); + &mov ($Dlo,"eax"); + &mov ($Dhi,"ebx"); + &mov ("esi","ecx"); + + &shr ("ecx",2) # lo>>2 + &mov ("edi","edx"); + &shr ("edx",2) # hi>>2 + &mov ("ebx","ecx"); + &shl ("esi",4); # lo<<4 + &mov ("eax","edx"); + &shl ("edi",4); # hi<<4 + &xor ("ebx","esi"); + + &shr ("ecx",7-2); # lo>>7 + &xor ("eax","edi"); + &shr ("edx",7-2); # hi>>7 + &xor ("ebx","ecx"); + &shl ("esi",25-4); # lo<<25 + &xor ("eax","edx"); + &shl ("edi",25-4); # hi<<25 + &xor ("eax","esi"); + + &shr ("ecx",28-7); # lo>>28 + &xor ("ebx","edi"); + &shr ("edx",28-7); # hi>>28 + &xor ("eax","ecx"); + &shl ("esi",30-25); # lo<<30 + &xor ("ebx","edx"); + &shl ("edi",30-25); # hi<<30 + &xor ("eax","esi"); + &xor ("ebx","edi"); # Sigma0(a) + + &mov ("ecx",$Alo); + &mov ("edx",$Ahi); + &mov ("esi",$Blo); + &mov ("edi",$Bhi); + &add ("eax",$Tlo); + &adc ("ebx",$Thi); # T1 = Sigma0(a)+T1 + &or ("ecx","esi"); + &or ("edx","edi"); + &and ("ecx",$Clo); + &and ("edx",$Chi); + &and ("esi",$Alo); + &and ("edi",$Ahi); + &or ("ecx","esi"); + &or ("edx","edi"); # Maj(a,b,c) = ((a|b)&c)|(a&b) + + &add ("eax","ecx"); + &adc ("ebx","edx"); # T1 += Maj(a,b,c) + &mov ($Tlo,"eax"); + &mov ($Thi,"ebx"); + + &mov (&LB("edx"),&BP(0,$K512)); # pre-fetch LSB of *K + &sub ("esp",8); + &lea ($K512,&DWP(8,$K512)); # K++ +} + + +&function_begin("sha512_block_data_order"); + &mov ("esi",wparam(0)); # ctx + &mov ("edi",wparam(1)); # inp + &mov ("eax",wparam(2)); # num + &mov ("ebx","esp"); # saved sp + + &call (&label("pic_point")); # make it PIC! +&set_label("pic_point"); + &blindpop($K512); + &lea ($K512,&DWP(&label("K512")."-".&label("pic_point"),$K512)); + + &sub ("esp",16); + &and ("esp",-64); + + &shl ("eax",7); + &add ("eax","edi"); + &mov (&DWP(0,"esp"),"esi"); # ctx + &mov (&DWP(4,"esp"),"edi"); # inp + &mov (&DWP(8,"esp"),"eax"); # inp+num*128 + &mov (&DWP(12,"esp"),"ebx"); # saved sp + +if ($sse2) { + &picmeup("edx","OPENSSL_ia32cap_P",$K512,&label("K512")); + &bt (&DWP(0,"edx"),26); + &jnc (&label("loop_x86")); + + # load ctx->h[0-7] + &movq ($A,&QWP(0,"esi")); + &movq ("mm1",&QWP(8,"esi")); + &movq ("mm2",&QWP(16,"esi")); + &movq ("mm3",&QWP(24,"esi")); + &movq ($E,&QWP(32,"esi")); + &movq ("mm5",&QWP(40,"esi")); + &movq ("mm6",&QWP(48,"esi")); + &movq ("mm7",&QWP(56,"esi")); + &sub ("esp",8*10); + +&set_label("loop_sse2",16); + # &movq ($Asse2,$A); + &movq ($Bsse2,"mm1"); + &movq ($Csse2,"mm2"); + &movq ($Dsse2,"mm3"); + # &movq ($Esse2,$E); + &movq ($Fsse2,"mm5"); + &movq ($Gsse2,"mm6"); + &movq ($Hsse2,"mm7"); + + &mov ("ecx",&DWP(0,"edi")); + &mov ("edx",&DWP(4,"edi")); + &add ("edi",8); + &bswap ("ecx"); + &bswap ("edx"); + &mov (&DWP(8*9+4,"esp"),"ecx"); + &mov (&DWP(8*9+0,"esp"),"edx"); + +&set_label("00_14_sse2",16); + &mov ("eax",&DWP(0,"edi")); + &mov ("ebx",&DWP(4,"edi")); + &add ("edi",8); + &bswap ("eax"); + &bswap ("ebx"); + &mov (&DWP(8*8+4,"esp"),"eax"); + &mov (&DWP(8*8+0,"esp"),"ebx"); + + &BODY_00_15_sse2(); + + &cmp (&LB("edx"),0x35); + &jne (&label("00_14_sse2")); + + &BODY_00_15_sse2(1); + +&set_label("16_79_sse2",16); + #&movq ("mm2",&QWP(8*(9+16-1),"esp")); #prefetched in BODY_00_15 + #&movq ("mm6",&QWP(8*(9+16-14),"esp")); + &movq ("mm1","mm2"); + + &psrlq ("mm2",1); + &movq ("mm7","mm6"); + &psrlq ("mm6",6); + &movq ("mm3","mm2"); + + &psrlq ("mm2",7-1); + &movq ("mm5","mm6"); + &psrlq ("mm6",19-6); + &pxor ("mm3","mm2"); + + &psrlq ("mm2",8-7); + &pxor ("mm5","mm6"); + &psrlq ("mm6",61-19); + &pxor ("mm3","mm2"); + + &movq ("mm2",&QWP(8*(9+16),"esp")); + + &psllq ("mm1",56); + &pxor ("mm5","mm6"); + &psllq ("mm7",3); + &pxor ("mm3","mm1"); + + &paddq ("mm2",&QWP(8*(9+16-9),"esp")); + + &psllq ("mm1",63-56); + &pxor ("mm5","mm7"); + &psllq ("mm7",45-3); + &pxor ("mm3","mm1"); + &pxor ("mm5","mm7"); + + &paddq ("mm3","mm5"); + &paddq ("mm3","mm2"); + &movq (&QWP(8*9,"esp"),"mm3"); + + &BODY_00_15_sse2(1); + + &cmp (&LB("edx"),0x17); + &jne (&label("16_79_sse2")); + + # &movq ($A,$Asse2); + &movq ("mm1",$Bsse2); + &movq ("mm2",$Csse2); + &movq ("mm3",$Dsse2); + # &movq ($E,$Esse2); + &movq ("mm5",$Fsse2); + &movq ("mm6",$Gsse2); + &movq ("mm7",$Hsse2); + + &paddq ($A,&QWP(0,"esi")); + &paddq ("mm1",&QWP(8,"esi")); + &paddq ("mm2",&QWP(16,"esi")); + &paddq ("mm3",&QWP(24,"esi")); + &paddq ($E,&QWP(32,"esi")); + &paddq ("mm5",&QWP(40,"esi")); + &paddq ("mm6",&QWP(48,"esi")); + &paddq ("mm7",&QWP(56,"esi")); + + &movq (&QWP(0,"esi"),$A); + &movq (&QWP(8,"esi"),"mm1"); + &movq (&QWP(16,"esi"),"mm2"); + &movq (&QWP(24,"esi"),"mm3"); + &movq (&QWP(32,"esi"),$E); + &movq (&QWP(40,"esi"),"mm5"); + &movq (&QWP(48,"esi"),"mm6"); + &movq (&QWP(56,"esi"),"mm7"); + + &add ("esp",8*80); # destroy frame + &sub ($K512,8*80); # rewind K + + &cmp ("edi",&DWP(8*10+8,"esp")); # are we done yet? + &jb (&label("loop_sse2")); + + &emms (); + &mov ("esp",&DWP(8*10+12,"esp")); # restore sp +&function_end_A(); +} +&set_label("loop_x86",16); + # copy input block to stack reversing byte and qword order + for ($i=0;$i<8;$i++) { + &mov ("eax",&DWP($i*16+0,"edi")); + &mov ("ebx",&DWP($i*16+4,"edi")); + &mov ("ecx",&DWP($i*16+8,"edi")); + &mov ("edx",&DWP($i*16+12,"edi")); + &bswap ("eax"); + &bswap ("ebx"); + &bswap ("ecx"); + &bswap ("edx"); + &push ("eax"); + &push ("ebx"); + &push ("ecx"); + &push ("edx"); + } + &add ("edi",128); + &sub ("esp",9*8); # place for T,A,B,C,D,E,F,G,H + &mov (&DWP(8*(9+16)+4,"esp"),"edi"); + + # copy ctx->h[0-7] to A,B,C,D,E,F,G,H on stack + &lea ("edi",&DWP(8,"esp")); + &mov ("ecx",16); + &data_word(0xA5F3F689); # rep movsd + +&set_label("00_15_x86",16); + &BODY_00_15_x86(); + + &cmp (&LB("edx"),0x94); + &jne (&label("00_15_x86")); + +&set_label("16_79_x86",16); + #define sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) + # LO lo>>1^hi<<31 ^ lo>>8^hi<<24 ^ lo>>7^hi<<25 + # HI hi>>1^lo<<31 ^ hi>>8^lo<<24 ^ hi>>7 + &mov ("ecx",&DWP(8*(9+15+16-1)+0,"esp")); + &mov ("edx",&DWP(8*(9+15+16-1)+4,"esp")); + &mov ("esi","ecx"); + + &shr ("ecx",1) # lo>>1 + &mov ("edi","edx"); + &shr ("edx",1) # hi>>1 + &mov ("eax","ecx"); + &shl ("esi",24); # lo<<24 + &mov ("ebx","edx"); + &shl ("edi",24); # hi<<24 + &xor ("ebx","esi"); + + &shr ("ecx",7-1); # lo>>7 + &xor ("eax","edi"); + &shr ("edx",7-1); # hi>>7 + &xor ("eax","ecx"); + &shl ("esi",31-24); # lo<<31 + &xor ("ebx","edx"); + &shl ("edi",25-24); # hi<<25 + &xor ("ebx","esi"); + + &shr ("ecx",8-7); # lo>>8 + &xor ("eax","edi"); + &shr ("edx",8-7); # hi>>8 + &xor ("eax","ecx"); + &shl ("edi",31-25); # hi<<31 + &xor ("ebx","edx"); + &xor ("eax","edi"); # T1 = sigma0(X[-15]) + + &mov (&DWP(0,"esp"),"eax"); + &mov (&DWP(4,"esp"),"ebx"); # put T1 away + + #define sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) + # LO lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26 + # HI hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6 + &mov ("ecx",&DWP(8*(9+15+16-14)+0,"esp")); + &mov ("edx",&DWP(8*(9+15+16-14)+4,"esp")); + &mov ("esi","ecx"); + + &shr ("ecx",6) # lo>>6 + &mov ("edi","edx"); + &shr ("edx",6) # hi>>6 + &mov ("eax","ecx"); + &shl ("esi",3); # lo<<3 + &mov ("ebx","edx"); + &shl ("edi",3); # hi<<3 + &xor ("eax","esi"); + + &shr ("ecx",19-6); # lo>>19 + &xor ("ebx","edi"); + &shr ("edx",19-6); # hi>>19 + &xor ("eax","ecx"); + &shl ("esi",13-3); # lo<<13 + &xor ("ebx","edx"); + &shl ("edi",13-3); # hi<<13 + &xor ("ebx","esi"); + + &shr ("ecx",29-19); # lo>>29 + &xor ("eax","edi"); + &shr ("edx",29-19); # hi>>29 + &xor ("ebx","ecx"); + &shl ("edi",26-13); # hi<<26 + &xor ("eax","edx"); + &xor ("eax","edi"); # sigma1(X[-2]) + + &mov ("ecx",&DWP(8*(9+15+16)+0,"esp")); + &mov ("edx",&DWP(8*(9+15+16)+4,"esp")); + &add ("eax",&DWP(0,"esp")); + &adc ("ebx",&DWP(4,"esp")); # T1 = sigma1(X[-2])+T1 + &mov ("esi",&DWP(8*(9+15+16-9)+0,"esp")); + &mov ("edi",&DWP(8*(9+15+16-9)+4,"esp")); + &add ("eax","ecx"); + &adc ("ebx","edx"); # T1 += X[-16] + &add ("eax","esi"); + &adc ("ebx","edi"); # T1 += X[-7] + &mov (&DWP(8*(9+15)+0,"esp"),"eax"); + &mov (&DWP(8*(9+15)+4,"esp"),"ebx"); # save X[0] + + &BODY_00_15_x86(); + + &cmp (&LB("edx"),0x17); + &jne (&label("16_79_x86")); + + &mov ("esi",&DWP(8*(9+16+80)+0,"esp"));# ctx + &mov ("edi",&DWP(8*(9+16+80)+4,"esp"));# inp + for($i=0;$i<4;$i++) { + &mov ("eax",&DWP($i*16+0,"esi")); + &mov ("ebx",&DWP($i*16+4,"esi")); + &mov ("ecx",&DWP($i*16+8,"esi")); + &mov ("edx",&DWP($i*16+12,"esi")); + &add ("eax",&DWP(8+($i*16)+0,"esp")); + &adc ("ebx",&DWP(8+($i*16)+4,"esp")); + &mov (&DWP($i*16+0,"esi"),"eax"); + &mov (&DWP($i*16+4,"esi"),"ebx"); + &add ("ecx",&DWP(8+($i*16)+8,"esp")); + &adc ("edx",&DWP(8+($i*16)+12,"esp")); + &mov (&DWP($i*16+8,"esi"),"ecx"); + &mov (&DWP($i*16+12,"esi"),"edx"); + } + &add ("esp",8*(9+16+80)); # destroy frame + &sub ($K512,8*80); # rewind K + + &cmp ("edi",&DWP(8,"esp")); # are we done yet? + &jb (&label("loop_x86")); + + &mov ("esp",&DWP(12,"esp")); # restore sp +&function_end_A(); + +&set_label("K512",64); # Yes! I keep it in the code segment! + &data_word(0xd728ae22,0x428a2f98); # u64 + &data_word(0x23ef65cd,0x71374491); # u64 + &data_word(0xec4d3b2f,0xb5c0fbcf); # u64 + &data_word(0x8189dbbc,0xe9b5dba5); # u64 + &data_word(0xf348b538,0x3956c25b); # u64 + &data_word(0xb605d019,0x59f111f1); # u64 + &data_word(0xaf194f9b,0x923f82a4); # u64 + &data_word(0xda6d8118,0xab1c5ed5); # u64 + &data_word(0xa3030242,0xd807aa98); # u64 + &data_word(0x45706fbe,0x12835b01); # u64 + &data_word(0x4ee4b28c,0x243185be); # u64 + &data_word(0xd5ffb4e2,0x550c7dc3); # u64 + &data_word(0xf27b896f,0x72be5d74); # u64 + &data_word(0x3b1696b1,0x80deb1fe); # u64 + &data_word(0x25c71235,0x9bdc06a7); # u64 + &data_word(0xcf692694,0xc19bf174); # u64 + &data_word(0x9ef14ad2,0xe49b69c1); # u64 + &data_word(0x384f25e3,0xefbe4786); # u64 + &data_word(0x8b8cd5b5,0x0fc19dc6); # u64 + &data_word(0x77ac9c65,0x240ca1cc); # u64 + &data_word(0x592b0275,0x2de92c6f); # u64 + &data_word(0x6ea6e483,0x4a7484aa); # u64 + &data_word(0xbd41fbd4,0x5cb0a9dc); # u64 + &data_word(0x831153b5,0x76f988da); # u64 + &data_word(0xee66dfab,0x983e5152); # u64 + &data_word(0x2db43210,0xa831c66d); # u64 + &data_word(0x98fb213f,0xb00327c8); # u64 + &data_word(0xbeef0ee4,0xbf597fc7); # u64 + &data_word(0x3da88fc2,0xc6e00bf3); # u64 + &data_word(0x930aa725,0xd5a79147); # u64 + &data_word(0xe003826f,0x06ca6351); # u64 + &data_word(0x0a0e6e70,0x14292967); # u64 + &data_word(0x46d22ffc,0x27b70a85); # u64 + &data_word(0x5c26c926,0x2e1b2138); # u64 + &data_word(0x5ac42aed,0x4d2c6dfc); # u64 + &data_word(0x9d95b3df,0x53380d13); # u64 + &data_word(0x8baf63de,0x650a7354); # u64 + &data_word(0x3c77b2a8,0x766a0abb); # u64 + &data_word(0x47edaee6,0x81c2c92e); # u64 + &data_word(0x1482353b,0x92722c85); # u64 + &data_word(0x4cf10364,0xa2bfe8a1); # u64 + &data_word(0xbc423001,0xa81a664b); # u64 + &data_word(0xd0f89791,0xc24b8b70); # u64 + &data_word(0x0654be30,0xc76c51a3); # u64 + &data_word(0xd6ef5218,0xd192e819); # u64 + &data_word(0x5565a910,0xd6990624); # u64 + &data_word(0x5771202a,0xf40e3585); # u64 + &data_word(0x32bbd1b8,0x106aa070); # u64 + &data_word(0xb8d2d0c8,0x19a4c116); # u64 + &data_word(0x5141ab53,0x1e376c08); # u64 + &data_word(0xdf8eeb99,0x2748774c); # u64 + &data_word(0xe19b48a8,0x34b0bcb5); # u64 + &data_word(0xc5c95a63,0x391c0cb3); # u64 + &data_word(0xe3418acb,0x4ed8aa4a); # u64 + &data_word(0x7763e373,0x5b9cca4f); # u64 + &data_word(0xd6b2b8a3,0x682e6ff3); # u64 + &data_word(0x5defb2fc,0x748f82ee); # u64 + &data_word(0x43172f60,0x78a5636f); # u64 + &data_word(0xa1f0ab72,0x84c87814); # u64 + &data_word(0x1a6439ec,0x8cc70208); # u64 + &data_word(0x23631e28,0x90befffa); # u64 + &data_word(0xde82bde9,0xa4506ceb); # u64 + &data_word(0xb2c67915,0xbef9a3f7); # u64 + &data_word(0xe372532b,0xc67178f2); # u64 + &data_word(0xea26619c,0xca273ece); # u64 + &data_word(0x21c0c207,0xd186b8c7); # u64 + &data_word(0xcde0eb1e,0xeada7dd6); # u64 + &data_word(0xee6ed178,0xf57d4f7f); # u64 + &data_word(0x72176fba,0x06f067aa); # u64 + &data_word(0xa2c898a6,0x0a637dc5); # u64 + &data_word(0xbef90dae,0x113f9804); # u64 + &data_word(0x131c471b,0x1b710b35); # u64 + &data_word(0x23047d84,0x28db77f5); # u64 + &data_word(0x40c72493,0x32caab7b); # u64 + &data_word(0x15c9bebc,0x3c9ebe0a); # u64 + &data_word(0x9c100d4c,0x431d67c4); # u64 + &data_word(0xcb3e42b6,0x4cc5d4be); # u64 + &data_word(0xfc657e2a,0x597f299c); # u64 + &data_word(0x3ad6faec,0x5fcb6fab); # u64 + &data_word(0x4a475817,0x6c44198c); # u64 +&function_end_B("sha512_block_data_order"); +&asciz("SHA512 block transform for x86, CRYPTOGAMS by <appro\@openssl.org>"); + +&asm_finish(); diff --git a/app/openssl/crypto/sha/asm/sha512-armv4.pl b/app/openssl/crypto/sha/asm/sha512-armv4.pl new file mode 100644 index 00000000..3a35861a --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha512-armv4.pl @@ -0,0 +1,403 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# SHA512 block procedure for ARMv4. September 2007. + +# This code is ~4.5 (four and a half) times faster than code generated +# by gcc 3.4 and it spends ~72 clock cycles per byte [on single-issue +# Xscale PXA250 core]. +# +# July 2010. +# +# Rescheduling for dual-issue pipeline resulted in 6% improvement on +# Cortex A8 core and ~40 cycles per processed byte. + +# Byte order [in]dependence. ========================================= +# +# Caller is expected to maintain specific *dword* order in h[0-7], +# namely with most significant dword at *lower* address, which is +# reflected in below two parameters. *Byte* order within these dwords +# in turn is whatever *native* byte order on current platform. +$hi=0; +$lo=4; +# ==================================================================== + +while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {} +open STDOUT,">$output"; + +$ctx="r0"; +$inp="r1"; +$len="r2"; +$Tlo="r3"; +$Thi="r4"; +$Alo="r5"; +$Ahi="r6"; +$Elo="r7"; +$Ehi="r8"; +$t0="r9"; +$t1="r10"; +$t2="r11"; +$t3="r12"; +############ r13 is stack pointer +$Ktbl="r14"; +############ r15 is program counter + +$Aoff=8*0; +$Boff=8*1; +$Coff=8*2; +$Doff=8*3; +$Eoff=8*4; +$Foff=8*5; +$Goff=8*6; +$Hoff=8*7; +$Xoff=8*8; + +sub BODY_00_15() { +my $magic = shift; +$code.=<<___; + ldr $t2,[sp,#$Hoff+0] @ h.lo + ldr $t3,[sp,#$Hoff+4] @ h.hi + @ Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) + @ LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23 + @ HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23 + mov $t0,$Elo,lsr#14 + mov $t1,$Ehi,lsr#14 + eor $t0,$t0,$Ehi,lsl#18 + eor $t1,$t1,$Elo,lsl#18 + eor $t0,$t0,$Elo,lsr#18 + eor $t1,$t1,$Ehi,lsr#18 + eor $t0,$t0,$Ehi,lsl#14 + eor $t1,$t1,$Elo,lsl#14 + eor $t0,$t0,$Ehi,lsr#9 + eor $t1,$t1,$Elo,lsr#9 + eor $t0,$t0,$Elo,lsl#23 + eor $t1,$t1,$Ehi,lsl#23 @ Sigma1(e) + adds $Tlo,$Tlo,$t0 + ldr $t0,[sp,#$Foff+0] @ f.lo + adc $Thi,$Thi,$t1 @ T += Sigma1(e) + ldr $t1,[sp,#$Foff+4] @ f.hi + adds $Tlo,$Tlo,$t2 + ldr $t2,[sp,#$Goff+0] @ g.lo + adc $Thi,$Thi,$t3 @ T += h + ldr $t3,[sp,#$Goff+4] @ g.hi + + eor $t0,$t0,$t2 + str $Elo,[sp,#$Eoff+0] + eor $t1,$t1,$t3 + str $Ehi,[sp,#$Eoff+4] + and $t0,$t0,$Elo + str $Alo,[sp,#$Aoff+0] + and $t1,$t1,$Ehi + str $Ahi,[sp,#$Aoff+4] + eor $t0,$t0,$t2 + ldr $t2,[$Ktbl,#4] @ K[i].lo + eor $t1,$t1,$t3 @ Ch(e,f,g) + ldr $t3,[$Ktbl,#0] @ K[i].hi + + adds $Tlo,$Tlo,$t0 + ldr $Elo,[sp,#$Doff+0] @ d.lo + adc $Thi,$Thi,$t1 @ T += Ch(e,f,g) + ldr $Ehi,[sp,#$Doff+4] @ d.hi + adds $Tlo,$Tlo,$t2 + adc $Thi,$Thi,$t3 @ T += K[i] + adds $Elo,$Elo,$Tlo + adc $Ehi,$Ehi,$Thi @ d += T + + and $t0,$t2,#0xff + teq $t0,#$magic + orreq $Ktbl,$Ktbl,#1 + + ldr $t2,[sp,#$Boff+0] @ b.lo + ldr $t3,[sp,#$Coff+0] @ c.lo + @ Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) + @ LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25 + @ HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25 + mov $t0,$Alo,lsr#28 + mov $t1,$Ahi,lsr#28 + eor $t0,$t0,$Ahi,lsl#4 + eor $t1,$t1,$Alo,lsl#4 + eor $t0,$t0,$Ahi,lsr#2 + eor $t1,$t1,$Alo,lsr#2 + eor $t0,$t0,$Alo,lsl#30 + eor $t1,$t1,$Ahi,lsl#30 + eor $t0,$t0,$Ahi,lsr#7 + eor $t1,$t1,$Alo,lsr#7 + eor $t0,$t0,$Alo,lsl#25 + eor $t1,$t1,$Ahi,lsl#25 @ Sigma0(a) + adds $Tlo,$Tlo,$t0 + adc $Thi,$Thi,$t1 @ T += Sigma0(a) + + and $t0,$Alo,$t2 + orr $Alo,$Alo,$t2 + ldr $t1,[sp,#$Boff+4] @ b.hi + ldr $t2,[sp,#$Coff+4] @ c.hi + and $Alo,$Alo,$t3 + orr $Alo,$Alo,$t0 @ Maj(a,b,c).lo + and $t3,$Ahi,$t1 + orr $Ahi,$Ahi,$t1 + and $Ahi,$Ahi,$t2 + orr $Ahi,$Ahi,$t3 @ Maj(a,b,c).hi + adds $Alo,$Alo,$Tlo + adc $Ahi,$Ahi,$Thi @ h += T + + sub sp,sp,#8 + add $Ktbl,$Ktbl,#8 +___ +} +$code=<<___; +.text +.code 32 +.type K512,%object +.align 5 +K512: +.word 0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd +.word 0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc +.word 0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019 +.word 0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118 +.word 0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe +.word 0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2 +.word 0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1 +.word 0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694 +.word 0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3 +.word 0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65 +.word 0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483 +.word 0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5 +.word 0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210 +.word 0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4 +.word 0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725 +.word 0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70 +.word 0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926 +.word 0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df +.word 0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8 +.word 0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b +.word 0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001 +.word 0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30 +.word 0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910 +.word 0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8 +.word 0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53 +.word 0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8 +.word 0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb +.word 0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3 +.word 0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60 +.word 0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec +.word 0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9 +.word 0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b +.word 0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207 +.word 0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178 +.word 0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6 +.word 0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b +.word 0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493 +.word 0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c +.word 0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a +.word 0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817 +.size K512,.-K512 + +.global sha512_block_data_order +.type sha512_block_data_order,%function +sha512_block_data_order: + sub r3,pc,#8 @ sha512_block_data_order + add $len,$inp,$len,lsl#7 @ len to point at the end of inp + stmdb sp!,{r4-r12,lr} + sub $Ktbl,r3,#640 @ K512 + sub sp,sp,#9*8 + + ldr $Elo,[$ctx,#$Eoff+$lo] + ldr $Ehi,[$ctx,#$Eoff+$hi] + ldr $t0, [$ctx,#$Goff+$lo] + ldr $t1, [$ctx,#$Goff+$hi] + ldr $t2, [$ctx,#$Hoff+$lo] + ldr $t3, [$ctx,#$Hoff+$hi] +.Loop: + str $t0, [sp,#$Goff+0] + str $t1, [sp,#$Goff+4] + str $t2, [sp,#$Hoff+0] + str $t3, [sp,#$Hoff+4] + ldr $Alo,[$ctx,#$Aoff+$lo] + ldr $Ahi,[$ctx,#$Aoff+$hi] + ldr $Tlo,[$ctx,#$Boff+$lo] + ldr $Thi,[$ctx,#$Boff+$hi] + ldr $t0, [$ctx,#$Coff+$lo] + ldr $t1, [$ctx,#$Coff+$hi] + ldr $t2, [$ctx,#$Doff+$lo] + ldr $t3, [$ctx,#$Doff+$hi] + str $Tlo,[sp,#$Boff+0] + str $Thi,[sp,#$Boff+4] + str $t0, [sp,#$Coff+0] + str $t1, [sp,#$Coff+4] + str $t2, [sp,#$Doff+0] + str $t3, [sp,#$Doff+4] + ldr $Tlo,[$ctx,#$Foff+$lo] + ldr $Thi,[$ctx,#$Foff+$hi] + str $Tlo,[sp,#$Foff+0] + str $Thi,[sp,#$Foff+4] + +.L00_15: + ldrb $Tlo,[$inp,#7] + ldrb $t0, [$inp,#6] + ldrb $t1, [$inp,#5] + ldrb $t2, [$inp,#4] + ldrb $Thi,[$inp,#3] + ldrb $t3, [$inp,#2] + orr $Tlo,$Tlo,$t0,lsl#8 + ldrb $t0, [$inp,#1] + orr $Tlo,$Tlo,$t1,lsl#16 + ldrb $t1, [$inp],#8 + orr $Tlo,$Tlo,$t2,lsl#24 + orr $Thi,$Thi,$t3,lsl#8 + orr $Thi,$Thi,$t0,lsl#16 + orr $Thi,$Thi,$t1,lsl#24 + str $Tlo,[sp,#$Xoff+0] + str $Thi,[sp,#$Xoff+4] +___ + &BODY_00_15(0x94); +$code.=<<___; + tst $Ktbl,#1 + beq .L00_15 + bic $Ktbl,$Ktbl,#1 + +.L16_79: + ldr $t0,[sp,#`$Xoff+8*(16-1)`+0] + ldr $t1,[sp,#`$Xoff+8*(16-1)`+4] + ldr $t2,[sp,#`$Xoff+8*(16-14)`+0] + ldr $t3,[sp,#`$Xoff+8*(16-14)`+4] + + @ sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) + @ LO lo>>1^hi<<31 ^ lo>>8^hi<<24 ^ lo>>7^hi<<25 + @ HI hi>>1^lo<<31 ^ hi>>8^lo<<24 ^ hi>>7 + mov $Tlo,$t0,lsr#1 + mov $Thi,$t1,lsr#1 + eor $Tlo,$Tlo,$t1,lsl#31 + eor $Thi,$Thi,$t0,lsl#31 + eor $Tlo,$Tlo,$t0,lsr#8 + eor $Thi,$Thi,$t1,lsr#8 + eor $Tlo,$Tlo,$t1,lsl#24 + eor $Thi,$Thi,$t0,lsl#24 + eor $Tlo,$Tlo,$t0,lsr#7 + eor $Thi,$Thi,$t1,lsr#7 + eor $Tlo,$Tlo,$t1,lsl#25 + + @ sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) + @ LO lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26 + @ HI hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6 + mov $t0,$t2,lsr#19 + mov $t1,$t3,lsr#19 + eor $t0,$t0,$t3,lsl#13 + eor $t1,$t1,$t2,lsl#13 + eor $t0,$t0,$t3,lsr#29 + eor $t1,$t1,$t2,lsr#29 + eor $t0,$t0,$t2,lsl#3 + eor $t1,$t1,$t3,lsl#3 + eor $t0,$t0,$t2,lsr#6 + eor $t1,$t1,$t3,lsr#6 + eor $t0,$t0,$t3,lsl#26 + + ldr $t2,[sp,#`$Xoff+8*(16-9)`+0] + ldr $t3,[sp,#`$Xoff+8*(16-9)`+4] + adds $Tlo,$Tlo,$t0 + adc $Thi,$Thi,$t1 + + ldr $t0,[sp,#`$Xoff+8*16`+0] + ldr $t1,[sp,#`$Xoff+8*16`+4] + adds $Tlo,$Tlo,$t2 + adc $Thi,$Thi,$t3 + adds $Tlo,$Tlo,$t0 + adc $Thi,$Thi,$t1 + str $Tlo,[sp,#$Xoff+0] + str $Thi,[sp,#$Xoff+4] +___ + &BODY_00_15(0x17); +$code.=<<___; + tst $Ktbl,#1 + beq .L16_79 + bic $Ktbl,$Ktbl,#1 + + ldr $Tlo,[sp,#$Boff+0] + ldr $Thi,[sp,#$Boff+4] + ldr $t0, [$ctx,#$Aoff+$lo] + ldr $t1, [$ctx,#$Aoff+$hi] + ldr $t2, [$ctx,#$Boff+$lo] + ldr $t3, [$ctx,#$Boff+$hi] + adds $t0,$Alo,$t0 + adc $t1,$Ahi,$t1 + adds $t2,$Tlo,$t2 + adc $t3,$Thi,$t3 + str $t0, [$ctx,#$Aoff+$lo] + str $t1, [$ctx,#$Aoff+$hi] + str $t2, [$ctx,#$Boff+$lo] + str $t3, [$ctx,#$Boff+$hi] + + ldr $Alo,[sp,#$Coff+0] + ldr $Ahi,[sp,#$Coff+4] + ldr $Tlo,[sp,#$Doff+0] + ldr $Thi,[sp,#$Doff+4] + ldr $t0, [$ctx,#$Coff+$lo] + ldr $t1, [$ctx,#$Coff+$hi] + ldr $t2, [$ctx,#$Doff+$lo] + ldr $t3, [$ctx,#$Doff+$hi] + adds $t0,$Alo,$t0 + adc $t1,$Ahi,$t1 + adds $t2,$Tlo,$t2 + adc $t3,$Thi,$t3 + str $t0, [$ctx,#$Coff+$lo] + str $t1, [$ctx,#$Coff+$hi] + str $t2, [$ctx,#$Doff+$lo] + str $t3, [$ctx,#$Doff+$hi] + + ldr $Tlo,[sp,#$Foff+0] + ldr $Thi,[sp,#$Foff+4] + ldr $t0, [$ctx,#$Eoff+$lo] + ldr $t1, [$ctx,#$Eoff+$hi] + ldr $t2, [$ctx,#$Foff+$lo] + ldr $t3, [$ctx,#$Foff+$hi] + adds $Elo,$Elo,$t0 + adc $Ehi,$Ehi,$t1 + adds $t2,$Tlo,$t2 + adc $t3,$Thi,$t3 + str $Elo,[$ctx,#$Eoff+$lo] + str $Ehi,[$ctx,#$Eoff+$hi] + str $t2, [$ctx,#$Foff+$lo] + str $t3, [$ctx,#$Foff+$hi] + + ldr $Alo,[sp,#$Goff+0] + ldr $Ahi,[sp,#$Goff+4] + ldr $Tlo,[sp,#$Hoff+0] + ldr $Thi,[sp,#$Hoff+4] + ldr $t0, [$ctx,#$Goff+$lo] + ldr $t1, [$ctx,#$Goff+$hi] + ldr $t2, [$ctx,#$Hoff+$lo] + ldr $t3, [$ctx,#$Hoff+$hi] + adds $t0,$Alo,$t0 + adc $t1,$Ahi,$t1 + adds $t2,$Tlo,$t2 + adc $t3,$Thi,$t3 + str $t0, [$ctx,#$Goff+$lo] + str $t1, [$ctx,#$Goff+$hi] + str $t2, [$ctx,#$Hoff+$lo] + str $t3, [$ctx,#$Hoff+$hi] + + add sp,sp,#640 + sub $Ktbl,$Ktbl,#640 + + teq $inp,$len + bne .Loop + + add sp,sp,#8*9 @ destroy frame + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + bx lr @ interoperable with Thumb ISA:-) +.size sha512_block_data_order,.-sha512_block_data_order +.asciz "SHA512 block transform for ARMv4, CRYPTOGAMS by <appro\@openssl.org>" +.align 2 +___ + +$code =~ s/\`([^\`]*)\`/eval $1/gem; +$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm; # make it possible to compile with -march=armv4 +print $code; +close STDOUT; # enforce flush diff --git a/app/openssl/crypto/sha/asm/sha512-armv4.s b/app/openssl/crypto/sha/asm/sha512-armv4.s new file mode 100644 index 00000000..b030c16c --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha512-armv4.s @@ -0,0 +1,412 @@ +.text +.code 32 +.type K512,%object +.align 5 +K512: +.word 0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd +.word 0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc +.word 0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019 +.word 0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118 +.word 0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe +.word 0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2 +.word 0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1 +.word 0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694 +.word 0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3 +.word 0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65 +.word 0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483 +.word 0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5 +.word 0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210 +.word 0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4 +.word 0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725 +.word 0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70 +.word 0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926 +.word 0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df +.word 0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8 +.word 0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b +.word 0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001 +.word 0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30 +.word 0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910 +.word 0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8 +.word 0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53 +.word 0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8 +.word 0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb +.word 0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3 +.word 0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60 +.word 0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec +.word 0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9 +.word 0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b +.word 0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207 +.word 0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178 +.word 0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6 +.word 0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b +.word 0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493 +.word 0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c +.word 0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a +.word 0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817 +.size K512,.-K512 + +.global sha512_block_data_order +.type sha512_block_data_order,%function +sha512_block_data_order: + sub r3,pc,#8 @ sha512_block_data_order + add r2,r1,r2,lsl#7 @ len to point at the end of inp + stmdb sp!,{r4-r12,lr} + sub r14,r3,#640 @ K512 + sub sp,sp,#9*8 + + ldr r7,[r0,#32+4] + ldr r8,[r0,#32+0] + ldr r9, [r0,#48+4] + ldr r10, [r0,#48+0] + ldr r11, [r0,#56+4] + ldr r12, [r0,#56+0] +.Loop: + str r9, [sp,#48+0] + str r10, [sp,#48+4] + str r11, [sp,#56+0] + str r12, [sp,#56+4] + ldr r5,[r0,#0+4] + ldr r6,[r0,#0+0] + ldr r3,[r0,#8+4] + ldr r4,[r0,#8+0] + ldr r9, [r0,#16+4] + ldr r10, [r0,#16+0] + ldr r11, [r0,#24+4] + ldr r12, [r0,#24+0] + str r3,[sp,#8+0] + str r4,[sp,#8+4] + str r9, [sp,#16+0] + str r10, [sp,#16+4] + str r11, [sp,#24+0] + str r12, [sp,#24+4] + ldr r3,[r0,#40+4] + ldr r4,[r0,#40+0] + str r3,[sp,#40+0] + str r4,[sp,#40+4] + +.L00_15: + ldrb r3,[r1,#7] + ldrb r9, [r1,#6] + ldrb r10, [r1,#5] + ldrb r11, [r1,#4] + ldrb r4,[r1,#3] + ldrb r12, [r1,#2] + orr r3,r3,r9,lsl#8 + ldrb r9, [r1,#1] + orr r3,r3,r10,lsl#16 + ldrb r10, [r1],#8 + orr r3,r3,r11,lsl#24 + orr r4,r4,r12,lsl#8 + orr r4,r4,r9,lsl#16 + orr r4,r4,r10,lsl#24 + str r3,[sp,#64+0] + str r4,[sp,#64+4] + ldr r11,[sp,#56+0] @ h.lo + ldr r12,[sp,#56+4] @ h.hi + @ Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) + @ LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23 + @ HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23 + mov r9,r7,lsr#14 + mov r10,r8,lsr#14 + eor r9,r9,r8,lsl#18 + eor r10,r10,r7,lsl#18 + eor r9,r9,r7,lsr#18 + eor r10,r10,r8,lsr#18 + eor r9,r9,r8,lsl#14 + eor r10,r10,r7,lsl#14 + eor r9,r9,r8,lsr#9 + eor r10,r10,r7,lsr#9 + eor r9,r9,r7,lsl#23 + eor r10,r10,r8,lsl#23 @ Sigma1(e) + adds r3,r3,r9 + ldr r9,[sp,#40+0] @ f.lo + adc r4,r4,r10 @ T += Sigma1(e) + ldr r10,[sp,#40+4] @ f.hi + adds r3,r3,r11 + ldr r11,[sp,#48+0] @ g.lo + adc r4,r4,r12 @ T += h + ldr r12,[sp,#48+4] @ g.hi + + eor r9,r9,r11 + str r7,[sp,#32+0] + eor r10,r10,r12 + str r8,[sp,#32+4] + and r9,r9,r7 + str r5,[sp,#0+0] + and r10,r10,r8 + str r6,[sp,#0+4] + eor r9,r9,r11 + ldr r11,[r14,#4] @ K[i].lo + eor r10,r10,r12 @ Ch(e,f,g) + ldr r12,[r14,#0] @ K[i].hi + + adds r3,r3,r9 + ldr r7,[sp,#24+0] @ d.lo + adc r4,r4,r10 @ T += Ch(e,f,g) + ldr r8,[sp,#24+4] @ d.hi + adds r3,r3,r11 + adc r4,r4,r12 @ T += K[i] + adds r7,r7,r3 + adc r8,r8,r4 @ d += T + + and r9,r11,#0xff + teq r9,#148 + orreq r14,r14,#1 + + ldr r11,[sp,#8+0] @ b.lo + ldr r12,[sp,#16+0] @ c.lo + @ Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) + @ LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25 + @ HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25 + mov r9,r5,lsr#28 + mov r10,r6,lsr#28 + eor r9,r9,r6,lsl#4 + eor r10,r10,r5,lsl#4 + eor r9,r9,r6,lsr#2 + eor r10,r10,r5,lsr#2 + eor r9,r9,r5,lsl#30 + eor r10,r10,r6,lsl#30 + eor r9,r9,r6,lsr#7 + eor r10,r10,r5,lsr#7 + eor r9,r9,r5,lsl#25 + eor r10,r10,r6,lsl#25 @ Sigma0(a) + adds r3,r3,r9 + adc r4,r4,r10 @ T += Sigma0(a) + + and r9,r5,r11 + orr r5,r5,r11 + ldr r10,[sp,#8+4] @ b.hi + ldr r11,[sp,#16+4] @ c.hi + and r5,r5,r12 + orr r5,r5,r9 @ Maj(a,b,c).lo + and r12,r6,r10 + orr r6,r6,r10 + and r6,r6,r11 + orr r6,r6,r12 @ Maj(a,b,c).hi + adds r5,r5,r3 + adc r6,r6,r4 @ h += T + + sub sp,sp,#8 + add r14,r14,#8 + tst r14,#1 + beq .L00_15 + bic r14,r14,#1 + +.L16_79: + ldr r9,[sp,#184+0] + ldr r10,[sp,#184+4] + ldr r11,[sp,#80+0] + ldr r12,[sp,#80+4] + + @ sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) + @ LO lo>>1^hi<<31 ^ lo>>8^hi<<24 ^ lo>>7^hi<<25 + @ HI hi>>1^lo<<31 ^ hi>>8^lo<<24 ^ hi>>7 + mov r3,r9,lsr#1 + mov r4,r10,lsr#1 + eor r3,r3,r10,lsl#31 + eor r4,r4,r9,lsl#31 + eor r3,r3,r9,lsr#8 + eor r4,r4,r10,lsr#8 + eor r3,r3,r10,lsl#24 + eor r4,r4,r9,lsl#24 + eor r3,r3,r9,lsr#7 + eor r4,r4,r10,lsr#7 + eor r3,r3,r10,lsl#25 + + @ sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) + @ LO lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26 + @ HI hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6 + mov r9,r11,lsr#19 + mov r10,r12,lsr#19 + eor r9,r9,r12,lsl#13 + eor r10,r10,r11,lsl#13 + eor r9,r9,r12,lsr#29 + eor r10,r10,r11,lsr#29 + eor r9,r9,r11,lsl#3 + eor r10,r10,r12,lsl#3 + eor r9,r9,r11,lsr#6 + eor r10,r10,r12,lsr#6 + eor r9,r9,r12,lsl#26 + + ldr r11,[sp,#120+0] + ldr r12,[sp,#120+4] + adds r3,r3,r9 + adc r4,r4,r10 + + ldr r9,[sp,#192+0] + ldr r10,[sp,#192+4] + adds r3,r3,r11 + adc r4,r4,r12 + adds r3,r3,r9 + adc r4,r4,r10 + str r3,[sp,#64+0] + str r4,[sp,#64+4] + ldr r11,[sp,#56+0] @ h.lo + ldr r12,[sp,#56+4] @ h.hi + @ Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) + @ LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23 + @ HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23 + mov r9,r7,lsr#14 + mov r10,r8,lsr#14 + eor r9,r9,r8,lsl#18 + eor r10,r10,r7,lsl#18 + eor r9,r9,r7,lsr#18 + eor r10,r10,r8,lsr#18 + eor r9,r9,r8,lsl#14 + eor r10,r10,r7,lsl#14 + eor r9,r9,r8,lsr#9 + eor r10,r10,r7,lsr#9 + eor r9,r9,r7,lsl#23 + eor r10,r10,r8,lsl#23 @ Sigma1(e) + adds r3,r3,r9 + ldr r9,[sp,#40+0] @ f.lo + adc r4,r4,r10 @ T += Sigma1(e) + ldr r10,[sp,#40+4] @ f.hi + adds r3,r3,r11 + ldr r11,[sp,#48+0] @ g.lo + adc r4,r4,r12 @ T += h + ldr r12,[sp,#48+4] @ g.hi + + eor r9,r9,r11 + str r7,[sp,#32+0] + eor r10,r10,r12 + str r8,[sp,#32+4] + and r9,r9,r7 + str r5,[sp,#0+0] + and r10,r10,r8 + str r6,[sp,#0+4] + eor r9,r9,r11 + ldr r11,[r14,#4] @ K[i].lo + eor r10,r10,r12 @ Ch(e,f,g) + ldr r12,[r14,#0] @ K[i].hi + + adds r3,r3,r9 + ldr r7,[sp,#24+0] @ d.lo + adc r4,r4,r10 @ T += Ch(e,f,g) + ldr r8,[sp,#24+4] @ d.hi + adds r3,r3,r11 + adc r4,r4,r12 @ T += K[i] + adds r7,r7,r3 + adc r8,r8,r4 @ d += T + + and r9,r11,#0xff + teq r9,#23 + orreq r14,r14,#1 + + ldr r11,[sp,#8+0] @ b.lo + ldr r12,[sp,#16+0] @ c.lo + @ Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) + @ LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25 + @ HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25 + mov r9,r5,lsr#28 + mov r10,r6,lsr#28 + eor r9,r9,r6,lsl#4 + eor r10,r10,r5,lsl#4 + eor r9,r9,r6,lsr#2 + eor r10,r10,r5,lsr#2 + eor r9,r9,r5,lsl#30 + eor r10,r10,r6,lsl#30 + eor r9,r9,r6,lsr#7 + eor r10,r10,r5,lsr#7 + eor r9,r9,r5,lsl#25 + eor r10,r10,r6,lsl#25 @ Sigma0(a) + adds r3,r3,r9 + adc r4,r4,r10 @ T += Sigma0(a) + + and r9,r5,r11 + orr r5,r5,r11 + ldr r10,[sp,#8+4] @ b.hi + ldr r11,[sp,#16+4] @ c.hi + and r5,r5,r12 + orr r5,r5,r9 @ Maj(a,b,c).lo + and r12,r6,r10 + orr r6,r6,r10 + and r6,r6,r11 + orr r6,r6,r12 @ Maj(a,b,c).hi + adds r5,r5,r3 + adc r6,r6,r4 @ h += T + + sub sp,sp,#8 + add r14,r14,#8 + tst r14,#1 + beq .L16_79 + bic r14,r14,#1 + + ldr r3,[sp,#8+0] + ldr r4,[sp,#8+4] + ldr r9, [r0,#0+4] + ldr r10, [r0,#0+0] + ldr r11, [r0,#8+4] + ldr r12, [r0,#8+0] + adds r9,r5,r9 + adc r10,r6,r10 + adds r11,r3,r11 + adc r12,r4,r12 + str r9, [r0,#0+4] + str r10, [r0,#0+0] + str r11, [r0,#8+4] + str r12, [r0,#8+0] + + ldr r5,[sp,#16+0] + ldr r6,[sp,#16+4] + ldr r3,[sp,#24+0] + ldr r4,[sp,#24+4] + ldr r9, [r0,#16+4] + ldr r10, [r0,#16+0] + ldr r11, [r0,#24+4] + ldr r12, [r0,#24+0] + adds r9,r5,r9 + adc r10,r6,r10 + adds r11,r3,r11 + adc r12,r4,r12 + str r9, [r0,#16+4] + str r10, [r0,#16+0] + str r11, [r0,#24+4] + str r12, [r0,#24+0] + + ldr r3,[sp,#40+0] + ldr r4,[sp,#40+4] + ldr r9, [r0,#32+4] + ldr r10, [r0,#32+0] + ldr r11, [r0,#40+4] + ldr r12, [r0,#40+0] + adds r7,r7,r9 + adc r8,r8,r10 + adds r11,r3,r11 + adc r12,r4,r12 + str r7,[r0,#32+4] + str r8,[r0,#32+0] + str r11, [r0,#40+4] + str r12, [r0,#40+0] + + ldr r5,[sp,#48+0] + ldr r6,[sp,#48+4] + ldr r3,[sp,#56+0] + ldr r4,[sp,#56+4] + ldr r9, [r0,#48+4] + ldr r10, [r0,#48+0] + ldr r11, [r0,#56+4] + ldr r12, [r0,#56+0] + adds r9,r5,r9 + adc r10,r6,r10 + adds r11,r3,r11 + adc r12,r4,r12 + str r9, [r0,#48+4] + str r10, [r0,#48+0] + str r11, [r0,#56+4] + str r12, [r0,#56+0] + + add sp,sp,#640 + sub r14,r14,#640 + + teq r1,r2 + bne .Loop + + add sp,sp,#8*9 @ destroy frame + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +.size sha512_block_data_order,.-sha512_block_data_order +.asciz "SHA512 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>" +.align 2 diff --git a/app/openssl/crypto/sha/asm/sha512-ia64.pl b/app/openssl/crypto/sha/asm/sha512-ia64.pl new file mode 100755 index 00000000..1c6ce565 --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha512-ia64.pl @@ -0,0 +1,672 @@ +#!/usr/bin/env perl +# +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== +# +# SHA256/512_Transform for Itanium. +# +# sha512_block runs in 1003 cycles on Itanium 2, which is almost 50% +# faster than gcc and >60%(!) faster than code generated by HP-UX +# compiler (yes, HP-UX is generating slower code, because unlike gcc, +# it failed to deploy "shift right pair," 'shrp' instruction, which +# substitutes for 64-bit rotate). +# +# 924 cycles long sha256_block outperforms gcc by over factor of 2(!) +# and HP-UX compiler - by >40% (yes, gcc won sha512_block, but lost +# this one big time). Note that "formally" 924 is about 100 cycles +# too much. I mean it's 64 32-bit rounds vs. 80 virtually identical +# 64-bit ones and 1003*64/80 gives 802. Extra cycles, 2 per round, +# are spent on extra work to provide for 32-bit rotations. 32-bit +# rotations are still handled by 'shrp' instruction and for this +# reason lower 32 bits are deposited to upper half of 64-bit register +# prior 'shrp' issue. And in order to minimize the amount of such +# operations, X[16] values are *maintained* with copies of lower +# halves in upper halves, which is why you'll spot such instructions +# as custom 'mux2', "parallel 32-bit add," 'padd4' and "parallel +# 32-bit unsigned right shift," 'pshr4.u' instructions here. +# +# Rules of engagement. +# +# There is only one integer shifter meaning that if I have two rotate, +# deposit or extract instructions in adjacent bundles, they shall +# split [at run-time if they have to]. But note that variable and +# parallel shifts are performed by multi-media ALU and *are* pairable +# with rotates [and alike]. On the backside MMALU is rather slow: it +# takes 2 extra cycles before the result of integer operation is +# available *to* MMALU and 2(*) extra cycles before the result of MM +# operation is available "back" *to* integer ALU, not to mention that +# MMALU itself has 2 cycles latency. However! I explicitly scheduled +# these MM instructions to avoid MM stalls, so that all these extra +# latencies get "hidden" in instruction-level parallelism. +# +# (*) 2 cycles on Itanium 1 and 1 cycle on Itanium 2. But I schedule +# for 2 in order to provide for best *overall* performance, +# because on Itanium 1 stall on MM result is accompanied by +# pipeline flush, which takes 6 cycles:-( +# +# Resulting performance numbers for 900MHz Itanium 2 system: +# +# The 'numbers' are in 1000s of bytes per second processed. +# type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes +# sha1(*) 6210.14k 20376.30k 52447.83k 85870.05k 105478.12k +# sha256 7476.45k 20572.05k 41538.34k 56062.29k 62093.18k +# sha512 4996.56k 20026.28k 47597.20k 85278.79k 111501.31k +# +# (*) SHA1 numbers are for HP-UX compiler and are presented purely +# for reference purposes. I bet it can improved too... +# +# To generate code, pass the file name with either 256 or 512 in its +# name and compiler flags. + +$output=shift; + +if ($output =~ /512.*\.[s|asm]/) { + $SZ=8; + $BITS=8*$SZ; + $LDW="ld8"; + $STW="st8"; + $ADD="add"; + $SHRU="shr.u"; + $TABLE="K512"; + $func="sha512_block_data_order"; + @Sigma0=(28,34,39); + @Sigma1=(14,18,41); + @sigma0=(1, 8, 7); + @sigma1=(19,61, 6); + $rounds=80; +} elsif ($output =~ /256.*\.[s|asm]/) { + $SZ=4; + $BITS=8*$SZ; + $LDW="ld4"; + $STW="st4"; + $ADD="padd4"; + $SHRU="pshr4.u"; + $TABLE="K256"; + $func="sha256_block_data_order"; + @Sigma0=( 2,13,22); + @Sigma1=( 6,11,25); + @sigma0=( 7,18, 3); + @sigma1=(17,19,10); + $rounds=64; +} else { die "nonsense $output"; } + +open STDOUT,">$output" || die "can't open $output: $!"; + +if ($^O eq "hpux") { + $ADDP="addp4"; + for (@ARGV) { $ADDP="add" if (/[\+DD|\-mlp]64/); } +} else { $ADDP="add"; } +for (@ARGV) { $big_endian=1 if (/\-DB_ENDIAN/); + $big_endian=0 if (/\-DL_ENDIAN/); } +if (!defined($big_endian)) + { $big_endian=(unpack('L',pack('N',1))==1); } + +$code=<<___; +.ident \"$output, version 1.1\" +.ident \"IA-64 ISA artwork by Andy Polyakov <appro\@fy.chalmers.se>\" +.explicit +.text + +pfssave=r2; +lcsave=r3; +prsave=r14; +K=r15; +A=r16; B=r17; C=r18; D=r19; +E=r20; F=r21; G=r22; H=r23; +T1=r24; T2=r25; +s0=r26; s1=r27; t0=r28; t1=r29; +Ktbl=r30; +ctx=r31; // 1st arg +input=r48; // 2nd arg +num=r49; // 3rd arg +sgm0=r50; sgm1=r51; // small constants +A_=r54; B_=r55; C_=r56; D_=r57; +E_=r58; F_=r59; G_=r60; H_=r61; + +// void $func (SHA_CTX *ctx, const void *in,size_t num[,int host]) +.global $func# +.proc $func# +.align 32 +$func: + .prologue + .save ar.pfs,pfssave +{ .mmi; alloc pfssave=ar.pfs,3,27,0,16 + $ADDP ctx=0,r32 // 1st arg + .save ar.lc,lcsave + mov lcsave=ar.lc } +{ .mmi; $ADDP input=0,r33 // 2nd arg + mov num=r34 // 3rd arg + .save pr,prsave + mov prsave=pr };; + + .body +{ .mib; add r8=0*$SZ,ctx + add r9=1*$SZ,ctx + brp.loop.imp .L_first16,.L_first16_end-16 } +{ .mib; add r10=2*$SZ,ctx + add r11=3*$SZ,ctx + brp.loop.imp .L_rest,.L_rest_end-16 };; + +// load A-H +.Lpic_point: +{ .mmi; $LDW A_=[r8],4*$SZ + $LDW B_=[r9],4*$SZ + mov Ktbl=ip } +{ .mmi; $LDW C_=[r10],4*$SZ + $LDW D_=[r11],4*$SZ + mov sgm0=$sigma0[2] };; +{ .mmi; $LDW E_=[r8] + $LDW F_=[r9] + add Ktbl=($TABLE#-.Lpic_point),Ktbl } +{ .mmi; $LDW G_=[r10] + $LDW H_=[r11] + cmp.ne p0,p16=0,r0 };; // used in sha256_block +___ +$code.=<<___ if ($BITS==64); +{ .mii; and r8=7,input + and input=~7,input;; + cmp.eq p9,p0=1,r8 } +{ .mmi; cmp.eq p10,p0=2,r8 + cmp.eq p11,p0=3,r8 + cmp.eq p12,p0=4,r8 } +{ .mmi; cmp.eq p13,p0=5,r8 + cmp.eq p14,p0=6,r8 + cmp.eq p15,p0=7,r8 };; +___ +$code.=<<___; +.L_outer: +.rotr X[16] +{ .mmi; mov A=A_ + mov B=B_ + mov ar.lc=14 } +{ .mmi; mov C=C_ + mov D=D_ + mov E=E_ } +{ .mmi; mov F=F_ + mov G=G_ + mov ar.ec=2 } +{ .mmi; ld1 X[15]=[input],$SZ // eliminated in 64-bit + mov H=H_ + mov sgm1=$sigma1[2] };; + +___ +$t0="t0", $t1="t1", $code.=<<___ if ($BITS==32); +.align 32 +.L_first16: +{ .mmi; add r9=1-$SZ,input + add r10=2-$SZ,input + add r11=3-$SZ,input };; +{ .mmi; ld1 r9=[r9] + ld1 r10=[r10] + dep.z $t1=E,32,32 } +{ .mmi; $LDW K=[Ktbl],$SZ + ld1 r11=[r11] + zxt4 E=E };; +{ .mii; or $t1=$t1,E + dep X[15]=X[15],r9,8,8 + dep r11=r10,r11,8,8 };; +{ .mmi; and T1=F,E + and T2=A,B + dep X[15]=X[15],r11,16,16 } +{ .mmi; andcm r8=G,E + and r9=A,C + mux2 $t0=A,0x44 };; // copy lower half to upper +{ .mmi; (p16) ld1 X[15-1]=[input],$SZ // prefetch + xor T1=T1,r8 // T1=((e & f) ^ (~e & g)) + _rotr r11=$t1,$Sigma1[0] } // ROTR(e,14) +{ .mib; and r10=B,C + xor T2=T2,r9 };; +___ +$t0="A", $t1="E", $code.=<<___ if ($BITS==64); +// in 64-bit mode I load whole X[16] at once and take care of alignment... +{ .mmi; add r8=1*$SZ,input + add r9=2*$SZ,input + add r10=3*$SZ,input };; +{ .mmb; $LDW X[15]=[input],4*$SZ + $LDW X[14]=[r8],4*$SZ +(p9) br.cond.dpnt.many .L1byte };; +{ .mmb; $LDW X[13]=[r9],4*$SZ + $LDW X[12]=[r10],4*$SZ +(p10) br.cond.dpnt.many .L2byte };; +{ .mmb; $LDW X[11]=[input],4*$SZ + $LDW X[10]=[r8],4*$SZ +(p11) br.cond.dpnt.many .L3byte };; +{ .mmb; $LDW X[ 9]=[r9],4*$SZ + $LDW X[ 8]=[r10],4*$SZ +(p12) br.cond.dpnt.many .L4byte };; +{ .mmb; $LDW X[ 7]=[input],4*$SZ + $LDW X[ 6]=[r8],4*$SZ +(p13) br.cond.dpnt.many .L5byte };; +{ .mmb; $LDW X[ 5]=[r9],4*$SZ + $LDW X[ 4]=[r10],4*$SZ +(p14) br.cond.dpnt.many .L6byte };; +{ .mmb; $LDW X[ 3]=[input],4*$SZ + $LDW X[ 2]=[r8],4*$SZ +(p15) br.cond.dpnt.many .L7byte };; +{ .mmb; $LDW X[ 1]=[r9],4*$SZ + $LDW X[ 0]=[r10],4*$SZ + br.many .L_first16 };; +.L1byte: +{ .mmi; $LDW X[13]=[r9],4*$SZ + $LDW X[12]=[r10],4*$SZ + shrp X[15]=X[15],X[14],56 };; +{ .mmi; $LDW X[11]=[input],4*$SZ + $LDW X[10]=[r8],4*$SZ + shrp X[14]=X[14],X[13],56 } +{ .mmi; $LDW X[ 9]=[r9],4*$SZ + $LDW X[ 8]=[r10],4*$SZ + shrp X[13]=X[13],X[12],56 };; +{ .mmi; $LDW X[ 7]=[input],4*$SZ + $LDW X[ 6]=[r8],4*$SZ + shrp X[12]=X[12],X[11],56 } +{ .mmi; $LDW X[ 5]=[r9],4*$SZ + $LDW X[ 4]=[r10],4*$SZ + shrp X[11]=X[11],X[10],56 };; +{ .mmi; $LDW X[ 3]=[input],4*$SZ + $LDW X[ 2]=[r8],4*$SZ + shrp X[10]=X[10],X[ 9],56 } +{ .mmi; $LDW X[ 1]=[r9],4*$SZ + $LDW X[ 0]=[r10],4*$SZ + shrp X[ 9]=X[ 9],X[ 8],56 };; +{ .mii; $LDW T1=[input] + shrp X[ 8]=X[ 8],X[ 7],56 + shrp X[ 7]=X[ 7],X[ 6],56 } +{ .mii; shrp X[ 6]=X[ 6],X[ 5],56 + shrp X[ 5]=X[ 5],X[ 4],56 };; +{ .mii; shrp X[ 4]=X[ 4],X[ 3],56 + shrp X[ 3]=X[ 3],X[ 2],56 } +{ .mii; shrp X[ 2]=X[ 2],X[ 1],56 + shrp X[ 1]=X[ 1],X[ 0],56 } +{ .mib; shrp X[ 0]=X[ 0],T1,56 + br.many .L_first16 };; +.L2byte: +{ .mmi; $LDW X[11]=[input],4*$SZ + $LDW X[10]=[r8],4*$SZ + shrp X[15]=X[15],X[14],48 } +{ .mmi; $LDW X[ 9]=[r9],4*$SZ + $LDW X[ 8]=[r10],4*$SZ + shrp X[14]=X[14],X[13],48 };; +{ .mmi; $LDW X[ 7]=[input],4*$SZ + $LDW X[ 6]=[r8],4*$SZ + shrp X[13]=X[13],X[12],48 } +{ .mmi; $LDW X[ 5]=[r9],4*$SZ + $LDW X[ 4]=[r10],4*$SZ + shrp X[12]=X[12],X[11],48 };; +{ .mmi; $LDW X[ 3]=[input],4*$SZ + $LDW X[ 2]=[r8],4*$SZ + shrp X[11]=X[11],X[10],48 } +{ .mmi; $LDW X[ 1]=[r9],4*$SZ + $LDW X[ 0]=[r10],4*$SZ + shrp X[10]=X[10],X[ 9],48 };; +{ .mii; $LDW T1=[input] + shrp X[ 9]=X[ 9],X[ 8],48 + shrp X[ 8]=X[ 8],X[ 7],48 } +{ .mii; shrp X[ 7]=X[ 7],X[ 6],48 + shrp X[ 6]=X[ 6],X[ 5],48 };; +{ .mii; shrp X[ 5]=X[ 5],X[ 4],48 + shrp X[ 4]=X[ 4],X[ 3],48 } +{ .mii; shrp X[ 3]=X[ 3],X[ 2],48 + shrp X[ 2]=X[ 2],X[ 1],48 } +{ .mii; shrp X[ 1]=X[ 1],X[ 0],48 + shrp X[ 0]=X[ 0],T1,48 } +{ .mfb; br.many .L_first16 };; +.L3byte: +{ .mmi; $LDW X[ 9]=[r9],4*$SZ + $LDW X[ 8]=[r10],4*$SZ + shrp X[15]=X[15],X[14],40 };; +{ .mmi; $LDW X[ 7]=[input],4*$SZ + $LDW X[ 6]=[r8],4*$SZ + shrp X[14]=X[14],X[13],40 } +{ .mmi; $LDW X[ 5]=[r9],4*$SZ + $LDW X[ 4]=[r10],4*$SZ + shrp X[13]=X[13],X[12],40 };; +{ .mmi; $LDW X[ 3]=[input],4*$SZ + $LDW X[ 2]=[r8],4*$SZ + shrp X[12]=X[12],X[11],40 } +{ .mmi; $LDW X[ 1]=[r9],4*$SZ + $LDW X[ 0]=[r10],4*$SZ + shrp X[11]=X[11],X[10],40 };; +{ .mii; $LDW T1=[input] + shrp X[10]=X[10],X[ 9],40 + shrp X[ 9]=X[ 9],X[ 8],40 } +{ .mii; shrp X[ 8]=X[ 8],X[ 7],40 + shrp X[ 7]=X[ 7],X[ 6],40 };; +{ .mii; shrp X[ 6]=X[ 6],X[ 5],40 + shrp X[ 5]=X[ 5],X[ 4],40 } +{ .mii; shrp X[ 4]=X[ 4],X[ 3],40 + shrp X[ 3]=X[ 3],X[ 2],40 } +{ .mii; shrp X[ 2]=X[ 2],X[ 1],40 + shrp X[ 1]=X[ 1],X[ 0],40 } +{ .mib; shrp X[ 0]=X[ 0],T1,40 + br.many .L_first16 };; +.L4byte: +{ .mmi; $LDW X[ 7]=[input],4*$SZ + $LDW X[ 6]=[r8],4*$SZ + shrp X[15]=X[15],X[14],32 } +{ .mmi; $LDW X[ 5]=[r9],4*$SZ + $LDW X[ 4]=[r10],4*$SZ + shrp X[14]=X[14],X[13],32 };; +{ .mmi; $LDW X[ 3]=[input],4*$SZ + $LDW X[ 2]=[r8],4*$SZ + shrp X[13]=X[13],X[12],32 } +{ .mmi; $LDW X[ 1]=[r9],4*$SZ + $LDW X[ 0]=[r10],4*$SZ + shrp X[12]=X[12],X[11],32 };; +{ .mii; $LDW T1=[input] + shrp X[11]=X[11],X[10],32 + shrp X[10]=X[10],X[ 9],32 } +{ .mii; shrp X[ 9]=X[ 9],X[ 8],32 + shrp X[ 8]=X[ 8],X[ 7],32 };; +{ .mii; shrp X[ 7]=X[ 7],X[ 6],32 + shrp X[ 6]=X[ 6],X[ 5],32 } +{ .mii; shrp X[ 5]=X[ 5],X[ 4],32 + shrp X[ 4]=X[ 4],X[ 3],32 } +{ .mii; shrp X[ 3]=X[ 3],X[ 2],32 + shrp X[ 2]=X[ 2],X[ 1],32 } +{ .mii; shrp X[ 1]=X[ 1],X[ 0],32 + shrp X[ 0]=X[ 0],T1,32 } +{ .mfb; br.many .L_first16 };; +.L5byte: +{ .mmi; $LDW X[ 5]=[r9],4*$SZ + $LDW X[ 4]=[r10],4*$SZ + shrp X[15]=X[15],X[14],24 };; +{ .mmi; $LDW X[ 3]=[input],4*$SZ + $LDW X[ 2]=[r8],4*$SZ + shrp X[14]=X[14],X[13],24 } +{ .mmi; $LDW X[ 1]=[r9],4*$SZ + $LDW X[ 0]=[r10],4*$SZ + shrp X[13]=X[13],X[12],24 };; +{ .mii; $LDW T1=[input] + shrp X[12]=X[12],X[11],24 + shrp X[11]=X[11],X[10],24 } +{ .mii; shrp X[10]=X[10],X[ 9],24 + shrp X[ 9]=X[ 9],X[ 8],24 };; +{ .mii; shrp X[ 8]=X[ 8],X[ 7],24 + shrp X[ 7]=X[ 7],X[ 6],24 } +{ .mii; shrp X[ 6]=X[ 6],X[ 5],24 + shrp X[ 5]=X[ 5],X[ 4],24 } +{ .mii; shrp X[ 4]=X[ 4],X[ 3],24 + shrp X[ 3]=X[ 3],X[ 2],24 } +{ .mii; shrp X[ 2]=X[ 2],X[ 1],24 + shrp X[ 1]=X[ 1],X[ 0],24 } +{ .mib; shrp X[ 0]=X[ 0],T1,24 + br.many .L_first16 };; +.L6byte: +{ .mmi; $LDW X[ 3]=[input],4*$SZ + $LDW X[ 2]=[r8],4*$SZ + shrp X[15]=X[15],X[14],16 } +{ .mmi; $LDW X[ 1]=[r9],4*$SZ + $LDW X[ 0]=[r10],4*$SZ + shrp X[14]=X[14],X[13],16 };; +{ .mii; $LDW T1=[input] + shrp X[13]=X[13],X[12],16 + shrp X[12]=X[12],X[11],16 } +{ .mii; shrp X[11]=X[11],X[10],16 + shrp X[10]=X[10],X[ 9],16 };; +{ .mii; shrp X[ 9]=X[ 9],X[ 8],16 + shrp X[ 8]=X[ 8],X[ 7],16 } +{ .mii; shrp X[ 7]=X[ 7],X[ 6],16 + shrp X[ 6]=X[ 6],X[ 5],16 } +{ .mii; shrp X[ 5]=X[ 5],X[ 4],16 + shrp X[ 4]=X[ 4],X[ 3],16 } +{ .mii; shrp X[ 3]=X[ 3],X[ 2],16 + shrp X[ 2]=X[ 2],X[ 1],16 } +{ .mii; shrp X[ 1]=X[ 1],X[ 0],16 + shrp X[ 0]=X[ 0],T1,16 } +{ .mfb; br.many .L_first16 };; +.L7byte: +{ .mmi; $LDW X[ 1]=[r9],4*$SZ + $LDW X[ 0]=[r10],4*$SZ + shrp X[15]=X[15],X[14],8 };; +{ .mii; $LDW T1=[input] + shrp X[14]=X[14],X[13],8 + shrp X[13]=X[13],X[12],8 } +{ .mii; shrp X[12]=X[12],X[11],8 + shrp X[11]=X[11],X[10],8 };; +{ .mii; shrp X[10]=X[10],X[ 9],8 + shrp X[ 9]=X[ 9],X[ 8],8 } +{ .mii; shrp X[ 8]=X[ 8],X[ 7],8 + shrp X[ 7]=X[ 7],X[ 6],8 } +{ .mii; shrp X[ 6]=X[ 6],X[ 5],8 + shrp X[ 5]=X[ 5],X[ 4],8 } +{ .mii; shrp X[ 4]=X[ 4],X[ 3],8 + shrp X[ 3]=X[ 3],X[ 2],8 } +{ .mii; shrp X[ 2]=X[ 2],X[ 1],8 + shrp X[ 1]=X[ 1],X[ 0],8 } +{ .mib; shrp X[ 0]=X[ 0],T1,8 + br.many .L_first16 };; + +.align 32 +.L_first16: +{ .mmi; $LDW K=[Ktbl],$SZ + and T1=F,E + and T2=A,B } +{ .mmi; //$LDW X[15]=[input],$SZ // X[i]=*input++ + andcm r8=G,E + and r9=A,C };; +{ .mmi; xor T1=T1,r8 //T1=((e & f) ^ (~e & g)) + and r10=B,C + _rotr r11=$t1,$Sigma1[0] } // ROTR(e,14) +{ .mmi; xor T2=T2,r9 + mux1 X[15]=X[15],\@rev };; // eliminated in big-endian +___ +$code.=<<___; +{ .mib; add T1=T1,H // T1=Ch(e,f,g)+h + _rotr r8=$t1,$Sigma1[1] } // ROTR(e,18) +{ .mib; xor T2=T2,r10 // T2=((a & b) ^ (a & c) ^ (b & c)) + mov H=G };; +{ .mib; xor r11=r8,r11 + _rotr r9=$t1,$Sigma1[2] } // ROTR(e,41) +{ .mib; mov G=F + mov F=E };; +{ .mib; xor r9=r9,r11 // r9=Sigma1(e) + _rotr r10=$t0,$Sigma0[0] } // ROTR(a,28) +{ .mib; add T1=T1,K // T1=Ch(e,f,g)+h+K512[i] + mov E=D };; +{ .mib; add T1=T1,r9 // T1+=Sigma1(e) + _rotr r11=$t0,$Sigma0[1] } // ROTR(a,34) +{ .mib; mov D=C + mov C=B };; +{ .mib; add T1=T1,X[15] // T1+=X[i] + _rotr r8=$t0,$Sigma0[2] } // ROTR(a,39) +{ .mib; xor r10=r10,r11 + mux2 X[15]=X[15],0x44 };; // eliminated in 64-bit +{ .mmi; xor r10=r8,r10 // r10=Sigma0(a) + mov B=A + add A=T1,T2 };; +{ .mib; add E=E,T1 + add A=A,r10 // T2=Maj(a,b,c)+Sigma0(a) + br.ctop.sptk .L_first16 };; +.L_first16_end: + +{ .mii; mov ar.lc=$rounds-17 + mov ar.ec=1 };; + +.align 32 +.L_rest: +.rotr X[16] +{ .mib; $LDW K=[Ktbl],$SZ + _rotr r8=X[15-1],$sigma0[0] } // ROTR(s0,1) +{ .mib; $ADD X[15]=X[15],X[15-9] // X[i&0xF]+=X[(i+9)&0xF] + $SHRU s0=X[15-1],sgm0 };; // s0=X[(i+1)&0xF]>>7 +{ .mib; and T1=F,E + _rotr r9=X[15-1],$sigma0[1] } // ROTR(s0,8) +{ .mib; andcm r10=G,E + $SHRU s1=X[15-14],sgm1 };; // s1=X[(i+14)&0xF]>>6 +{ .mmi; xor T1=T1,r10 // T1=((e & f) ^ (~e & g)) + xor r9=r8,r9 + _rotr r10=X[15-14],$sigma1[0] };;// ROTR(s1,19) +{ .mib; and T2=A,B + _rotr r11=X[15-14],$sigma1[1] }// ROTR(s1,61) +{ .mib; and r8=A,C };; +___ +$t0="t0", $t1="t1", $code.=<<___ if ($BITS==32); +// I adhere to mmi; in order to hold Itanium 1 back and avoid 6 cycle +// pipeline flush in last bundle. Note that even on Itanium2 the +// latter stalls for one clock cycle... +{ .mmi; xor s0=s0,r9 // s0=sigma0(X[(i+1)&0xF]) + dep.z $t1=E,32,32 } +{ .mmi; xor r10=r11,r10 + zxt4 E=E };; +{ .mmi; or $t1=$t1,E + xor s1=s1,r10 // s1=sigma1(X[(i+14)&0xF]) + mux2 $t0=A,0x44 };; // copy lower half to upper +{ .mmi; xor T2=T2,r8 + _rotr r9=$t1,$Sigma1[0] } // ROTR(e,14) +{ .mmi; and r10=B,C + add T1=T1,H // T1=Ch(e,f,g)+h + $ADD X[15]=X[15],s0 };; // X[i&0xF]+=sigma0(X[(i+1)&0xF]) +___ +$t0="A", $t1="E", $code.=<<___ if ($BITS==64); +{ .mib; xor s0=s0,r9 // s0=sigma0(X[(i+1)&0xF]) + _rotr r9=$t1,$Sigma1[0] } // ROTR(e,14) +{ .mib; xor r10=r11,r10 + xor T2=T2,r8 };; +{ .mib; xor s1=s1,r10 // s1=sigma1(X[(i+14)&0xF]) + add T1=T1,H } +{ .mib; and r10=B,C + $ADD X[15]=X[15],s0 };; // X[i&0xF]+=sigma0(X[(i+1)&0xF]) +___ +$code.=<<___; +{ .mmi; xor T2=T2,r10 // T2=((a & b) ^ (a & c) ^ (b & c)) + mov H=G + _rotr r8=$t1,$Sigma1[1] };; // ROTR(e,18) +{ .mmi; xor r11=r8,r9 + $ADD X[15]=X[15],s1 // X[i&0xF]+=sigma1(X[(i+14)&0xF]) + _rotr r9=$t1,$Sigma1[2] } // ROTR(e,41) +{ .mmi; mov G=F + mov F=E };; +{ .mib; xor r9=r9,r11 // r9=Sigma1(e) + _rotr r10=$t0,$Sigma0[0] } // ROTR(a,28) +{ .mib; add T1=T1,K // T1=Ch(e,f,g)+h+K512[i] + mov E=D };; +{ .mib; add T1=T1,r9 // T1+=Sigma1(e) + _rotr r11=$t0,$Sigma0[1] } // ROTR(a,34) +{ .mib; mov D=C + mov C=B };; +{ .mmi; add T1=T1,X[15] // T1+=X[i] + xor r10=r10,r11 + _rotr r8=$t0,$Sigma0[2] };; // ROTR(a,39) +{ .mmi; xor r10=r8,r10 // r10=Sigma0(a) + mov B=A + add A=T1,T2 };; +{ .mib; add E=E,T1 + add A=A,r10 // T2=Maj(a,b,c)+Sigma0(a) + br.ctop.sptk .L_rest };; +.L_rest_end: + +{ .mmi; add A_=A_,A + add B_=B_,B + add C_=C_,C } +{ .mmi; add D_=D_,D + add E_=E_,E + cmp.ltu p16,p0=1,num };; +{ .mmi; add F_=F_,F + add G_=G_,G + add H_=H_,H } +{ .mmb; add Ktbl=-$SZ*$rounds,Ktbl +(p16) add num=-1,num +(p16) br.dptk.many .L_outer };; + +{ .mib; add r8=0*$SZ,ctx + add r9=1*$SZ,ctx } +{ .mib; add r10=2*$SZ,ctx + add r11=3*$SZ,ctx };; +{ .mmi; $STW [r8]=A_,4*$SZ + $STW [r9]=B_,4*$SZ + mov ar.lc=lcsave } +{ .mmi; $STW [r10]=C_,4*$SZ + $STW [r11]=D_,4*$SZ + mov pr=prsave,0x1ffff };; +{ .mmb; $STW [r8]=E_ + $STW [r9]=F_ } +{ .mmb; $STW [r10]=G_ + $STW [r11]=H_ + br.ret.sptk.many b0 };; +.endp $func# +___ + +$code =~ s/\`([^\`]*)\`/eval $1/gem; +$code =~ s/_rotr(\s+)([^=]+)=([^,]+),([0-9]+)/shrp$1$2=$3,$3,$4/gm; +if ($BITS==64) { + $code =~ s/mux2(\s+)\S+/nop.i$1 0x0/gm; + $code =~ s/mux1(\s+)\S+/nop.i$1 0x0/gm if ($big_endian); + $code =~ s/(shrp\s+X\[[^=]+)=([^,]+),([^,]+),([1-9]+)/$1=$3,$2,64-$4/gm + if (!$big_endian); + $code =~ s/ld1(\s+)X\[\S+/nop.m$1 0x0/gm; +} + +print $code; + +print<<___ if ($BITS==32); +.align 64 +.type K256#,\@object +K256: data4 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 + data4 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 + data4 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 + data4 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 + data4 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc + data4 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da + data4 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 + data4 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 + data4 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 + data4 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 + data4 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 + data4 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 + data4 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 + data4 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 + data4 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 + data4 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 +.size K256#,$SZ*$rounds +stringz "SHA256 block transform for IA64, CRYPTOGAMS by <appro\@openssl.org>" +___ +print<<___ if ($BITS==64); +.align 64 +.type K512#,\@object +K512: data8 0x428a2f98d728ae22,0x7137449123ef65cd + data8 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc + data8 0x3956c25bf348b538,0x59f111f1b605d019 + data8 0x923f82a4af194f9b,0xab1c5ed5da6d8118 + data8 0xd807aa98a3030242,0x12835b0145706fbe + data8 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2 + data8 0x72be5d74f27b896f,0x80deb1fe3b1696b1 + data8 0x9bdc06a725c71235,0xc19bf174cf692694 + data8 0xe49b69c19ef14ad2,0xefbe4786384f25e3 + data8 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65 + data8 0x2de92c6f592b0275,0x4a7484aa6ea6e483 + data8 0x5cb0a9dcbd41fbd4,0x76f988da831153b5 + data8 0x983e5152ee66dfab,0xa831c66d2db43210 + data8 0xb00327c898fb213f,0xbf597fc7beef0ee4 + data8 0xc6e00bf33da88fc2,0xd5a79147930aa725 + data8 0x06ca6351e003826f,0x142929670a0e6e70 + data8 0x27b70a8546d22ffc,0x2e1b21385c26c926 + data8 0x4d2c6dfc5ac42aed,0x53380d139d95b3df + data8 0x650a73548baf63de,0x766a0abb3c77b2a8 + data8 0x81c2c92e47edaee6,0x92722c851482353b + data8 0xa2bfe8a14cf10364,0xa81a664bbc423001 + data8 0xc24b8b70d0f89791,0xc76c51a30654be30 + data8 0xd192e819d6ef5218,0xd69906245565a910 + data8 0xf40e35855771202a,0x106aa07032bbd1b8 + data8 0x19a4c116b8d2d0c8,0x1e376c085141ab53 + data8 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8 + data8 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb + data8 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3 + data8 0x748f82ee5defb2fc,0x78a5636f43172f60 + data8 0x84c87814a1f0ab72,0x8cc702081a6439ec + data8 0x90befffa23631e28,0xa4506cebde82bde9 + data8 0xbef9a3f7b2c67915,0xc67178f2e372532b + data8 0xca273eceea26619c,0xd186b8c721c0c207 + data8 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178 + data8 0x06f067aa72176fba,0x0a637dc5a2c898a6 + data8 0x113f9804bef90dae,0x1b710b35131c471b + data8 0x28db77f523047d84,0x32caab7b40c72493 + data8 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c + data8 0x4cc5d4becb3e42b6,0x597f299cfc657e2a + data8 0x5fcb6fab3ad6faec,0x6c44198c4a475817 +.size K512#,$SZ*$rounds +stringz "SHA512 block transform for IA64, CRYPTOGAMS by <appro\@openssl.org>" +___ diff --git a/app/openssl/crypto/sha/asm/sha512-ppc.pl b/app/openssl/crypto/sha/asm/sha512-ppc.pl new file mode 100755 index 00000000..768a6a6f --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha512-ppc.pl @@ -0,0 +1,462 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# I let hardware handle unaligned input, except on page boundaries +# (see below for details). Otherwise straightforward implementation +# with X vector in register bank. The module is big-endian [which is +# not big deal as there're no little-endian targets left around]. + +# sha256 | sha512 +# -m64 -m32 | -m64 -m32 +# --------------------------------------+----------------------- +# PPC970,gcc-4.0.0 +50% +38% | +40% +410%(*) +# Power6,xlc-7 +150% +90% | +100% +430%(*) +# +# (*) 64-bit code in 32-bit application context, which actually is +# on TODO list. It should be noted that for safe deployment in +# 32-bit *mutli-threaded* context asyncronous signals should be +# blocked upon entry to SHA512 block routine. This is because +# 32-bit signaling procedure invalidates upper halves of GPRs. +# Context switch procedure preserves them, but not signaling:-( + +# Second version is true multi-thread safe. Trouble with the original +# version was that it was using thread local storage pointer register. +# Well, it scrupulously preserved it, but the problem would arise the +# moment asynchronous signal was delivered and signal handler would +# dereference the TLS pointer. While it's never the case in openssl +# application or test suite, we have to respect this scenario and not +# use TLS pointer register. Alternative would be to require caller to +# block signals prior calling this routine. For the record, in 32-bit +# context R2 serves as TLS pointer, while in 64-bit context - R13. + +$flavour=shift; +$output =shift; + +if ($flavour =~ /64/) { + $SIZE_T=8; + $STU="stdu"; + $UCMP="cmpld"; + $SHL="sldi"; + $POP="ld"; + $PUSH="std"; +} elsif ($flavour =~ /32/) { + $SIZE_T=4; + $STU="stwu"; + $UCMP="cmplw"; + $SHL="slwi"; + $POP="lwz"; + $PUSH="stw"; +} else { die "nonsense $flavour"; } + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or +( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or +die "can't locate ppc-xlate.pl"; + +open STDOUT,"| $^X $xlate $flavour $output" || die "can't call $xlate: $!"; + +if ($output =~ /512/) { + $func="sha512_block_data_order"; + $SZ=8; + @Sigma0=(28,34,39); + @Sigma1=(14,18,41); + @sigma0=(1, 8, 7); + @sigma1=(19,61, 6); + $rounds=80; + $LD="ld"; + $ST="std"; + $ROR="rotrdi"; + $SHR="srdi"; +} else { + $func="sha256_block_data_order"; + $SZ=4; + @Sigma0=( 2,13,22); + @Sigma1=( 6,11,25); + @sigma0=( 7,18, 3); + @sigma1=(17,19,10); + $rounds=64; + $LD="lwz"; + $ST="stw"; + $ROR="rotrwi"; + $SHR="srwi"; +} + +$FRAME=32*$SIZE_T; + +$sp ="r1"; +$toc="r2"; +$ctx="r3"; # zapped by $a0 +$inp="r4"; # zapped by $a1 +$num="r5"; # zapped by $t0 + +$T ="r0"; +$a0 ="r3"; +$a1 ="r4"; +$t0 ="r5"; +$t1 ="r6"; +$Tbl="r7"; + +$A ="r8"; +$B ="r9"; +$C ="r10"; +$D ="r11"; +$E ="r12"; +$F ="r13"; $F="r2" if ($SIZE_T==8);# reassigned to exempt TLS pointer +$G ="r14"; +$H ="r15"; + +@V=($A,$B,$C,$D,$E,$F,$G,$H); +@X=("r16","r17","r18","r19","r20","r21","r22","r23", + "r24","r25","r26","r27","r28","r29","r30","r31"); + +$inp="r31"; # reassigned $inp! aliases with @X[15] + +sub ROUND_00_15 { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_; +$code.=<<___; + $LD $T,`$i*$SZ`($Tbl) + $ROR $a0,$e,$Sigma1[0] + $ROR $a1,$e,$Sigma1[1] + and $t0,$f,$e + andc $t1,$g,$e + add $T,$T,$h + xor $a0,$a0,$a1 + $ROR $a1,$a1,`$Sigma1[2]-$Sigma1[1]` + or $t0,$t0,$t1 ; Ch(e,f,g) + add $T,$T,@X[$i] + xor $a0,$a0,$a1 ; Sigma1(e) + add $T,$T,$t0 + add $T,$T,$a0 + + $ROR $a0,$a,$Sigma0[0] + $ROR $a1,$a,$Sigma0[1] + and $t0,$a,$b + and $t1,$a,$c + xor $a0,$a0,$a1 + $ROR $a1,$a1,`$Sigma0[2]-$Sigma0[1]` + xor $t0,$t0,$t1 + and $t1,$b,$c + xor $a0,$a0,$a1 ; Sigma0(a) + add $d,$d,$T + xor $t0,$t0,$t1 ; Maj(a,b,c) + add $h,$T,$a0 + add $h,$h,$t0 + +___ +} + +sub ROUND_16_xx { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_; +$i-=16; +$code.=<<___; + $ROR $a0,@X[($i+1)%16],$sigma0[0] + $ROR $a1,@X[($i+1)%16],$sigma0[1] + $ROR $t0,@X[($i+14)%16],$sigma1[0] + $ROR $t1,@X[($i+14)%16],$sigma1[1] + xor $a0,$a0,$a1 + $SHR $a1,@X[($i+1)%16],$sigma0[2] + xor $t0,$t0,$t1 + $SHR $t1,@X[($i+14)%16],$sigma1[2] + add @X[$i],@X[$i],@X[($i+9)%16] + xor $a0,$a0,$a1 ; sigma0(X[(i+1)&0x0f]) + xor $t0,$t0,$t1 ; sigma1(X[(i+14)&0x0f]) + add @X[$i],@X[$i],$a0 + add @X[$i],@X[$i],$t0 +___ +&ROUND_00_15($i,$a,$b,$c,$d,$e,$f,$g,$h); +} + +$code=<<___; +.machine "any" +.text + +.globl $func +.align 6 +$func: + mflr r0 + $STU $sp,`-($FRAME+16*$SZ)`($sp) + $SHL $num,$num,`log(16*$SZ)/log(2)` + + $PUSH $ctx,`$FRAME-$SIZE_T*22`($sp) + + $PUSH r0,`$FRAME-$SIZE_T*21`($sp) + $PUSH $toc,`$FRAME-$SIZE_T*20`($sp) + $PUSH r13,`$FRAME-$SIZE_T*19`($sp) + $PUSH r14,`$FRAME-$SIZE_T*18`($sp) + $PUSH r15,`$FRAME-$SIZE_T*17`($sp) + $PUSH r16,`$FRAME-$SIZE_T*16`($sp) + $PUSH r17,`$FRAME-$SIZE_T*15`($sp) + $PUSH r18,`$FRAME-$SIZE_T*14`($sp) + $PUSH r19,`$FRAME-$SIZE_T*13`($sp) + $PUSH r20,`$FRAME-$SIZE_T*12`($sp) + $PUSH r21,`$FRAME-$SIZE_T*11`($sp) + $PUSH r22,`$FRAME-$SIZE_T*10`($sp) + $PUSH r23,`$FRAME-$SIZE_T*9`($sp) + $PUSH r24,`$FRAME-$SIZE_T*8`($sp) + $PUSH r25,`$FRAME-$SIZE_T*7`($sp) + $PUSH r26,`$FRAME-$SIZE_T*6`($sp) + $PUSH r27,`$FRAME-$SIZE_T*5`($sp) + $PUSH r28,`$FRAME-$SIZE_T*4`($sp) + $PUSH r29,`$FRAME-$SIZE_T*3`($sp) + $PUSH r30,`$FRAME-$SIZE_T*2`($sp) + $PUSH r31,`$FRAME-$SIZE_T*1`($sp) + + $LD $A,`0*$SZ`($ctx) + mr $inp,r4 ; incarnate $inp + $LD $B,`1*$SZ`($ctx) + $LD $C,`2*$SZ`($ctx) + $LD $D,`3*$SZ`($ctx) + $LD $E,`4*$SZ`($ctx) + $LD $F,`5*$SZ`($ctx) + $LD $G,`6*$SZ`($ctx) + $LD $H,`7*$SZ`($ctx) + + b LPICmeup +LPICedup: + andi. r0,$inp,3 + bne Lunaligned +Laligned: + add $num,$inp,$num + $PUSH $num,`$FRAME-$SIZE_T*24`($sp) ; end pointer + $PUSH $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer + bl Lsha2_block_private +Ldone: + $POP r0,`$FRAME-$SIZE_T*21`($sp) + $POP $toc,`$FRAME-$SIZE_T*20`($sp) + $POP r13,`$FRAME-$SIZE_T*19`($sp) + $POP r14,`$FRAME-$SIZE_T*18`($sp) + $POP r15,`$FRAME-$SIZE_T*17`($sp) + $POP r16,`$FRAME-$SIZE_T*16`($sp) + $POP r17,`$FRAME-$SIZE_T*15`($sp) + $POP r18,`$FRAME-$SIZE_T*14`($sp) + $POP r19,`$FRAME-$SIZE_T*13`($sp) + $POP r20,`$FRAME-$SIZE_T*12`($sp) + $POP r21,`$FRAME-$SIZE_T*11`($sp) + $POP r22,`$FRAME-$SIZE_T*10`($sp) + $POP r23,`$FRAME-$SIZE_T*9`($sp) + $POP r24,`$FRAME-$SIZE_T*8`($sp) + $POP r25,`$FRAME-$SIZE_T*7`($sp) + $POP r26,`$FRAME-$SIZE_T*6`($sp) + $POP r27,`$FRAME-$SIZE_T*5`($sp) + $POP r28,`$FRAME-$SIZE_T*4`($sp) + $POP r29,`$FRAME-$SIZE_T*3`($sp) + $POP r30,`$FRAME-$SIZE_T*2`($sp) + $POP r31,`$FRAME-$SIZE_T*1`($sp) + mtlr r0 + addi $sp,$sp,`$FRAME+16*$SZ` + blr +___ + +# PowerPC specification allows an implementation to be ill-behaved +# upon unaligned access which crosses page boundary. "Better safe +# than sorry" principle makes me treat it specially. But I don't +# look for particular offending word, but rather for the input +# block which crosses the boundary. Once found that block is aligned +# and hashed separately... +$code.=<<___; +.align 4 +Lunaligned: + subfic $t1,$inp,4096 + andi. $t1,$t1,`4096-16*$SZ` ; distance to closest page boundary + beq Lcross_page + $UCMP $num,$t1 + ble- Laligned ; didn't cross the page boundary + subfc $num,$t1,$num + add $t1,$inp,$t1 + $PUSH $num,`$FRAME-$SIZE_T*25`($sp) ; save real remaining num + $PUSH $t1,`$FRAME-$SIZE_T*24`($sp) ; intermediate end pointer + $PUSH $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer + bl Lsha2_block_private + ; $inp equals to the intermediate end pointer here + $POP $num,`$FRAME-$SIZE_T*25`($sp) ; restore real remaining num +Lcross_page: + li $t1,`16*$SZ/4` + mtctr $t1 + addi r20,$sp,$FRAME ; aligned spot below the frame +Lmemcpy: + lbz r16,0($inp) + lbz r17,1($inp) + lbz r18,2($inp) + lbz r19,3($inp) + addi $inp,$inp,4 + stb r16,0(r20) + stb r17,1(r20) + stb r18,2(r20) + stb r19,3(r20) + addi r20,r20,4 + bdnz Lmemcpy + + $PUSH $inp,`$FRAME-$SIZE_T*26`($sp) ; save real inp + addi $t1,$sp,`$FRAME+16*$SZ` ; fictitious end pointer + addi $inp,$sp,$FRAME ; fictitious inp pointer + $PUSH $num,`$FRAME-$SIZE_T*25`($sp) ; save real num + $PUSH $t1,`$FRAME-$SIZE_T*24`($sp) ; end pointer + $PUSH $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer + bl Lsha2_block_private + $POP $inp,`$FRAME-$SIZE_T*26`($sp) ; restore real inp + $POP $num,`$FRAME-$SIZE_T*25`($sp) ; restore real num + addic. $num,$num,`-16*$SZ` ; num-- + bne- Lunaligned + b Ldone +___ + +$code.=<<___; +.align 4 +Lsha2_block_private: +___ +for($i=0;$i<16;$i++) { +$code.=<<___ if ($SZ==4); + lwz @X[$i],`$i*$SZ`($inp) +___ +# 64-bit loads are split to 2x32-bit ones, as CPU can't handle +# unaligned 64-bit loads, only 32-bit ones... +$code.=<<___ if ($SZ==8); + lwz $t0,`$i*$SZ`($inp) + lwz @X[$i],`$i*$SZ+4`($inp) + insrdi @X[$i],$t0,32,0 +___ + &ROUND_00_15($i,@V); + unshift(@V,pop(@V)); +} +$code.=<<___; + li $T,`$rounds/16-1` + mtctr $T +.align 4 +Lrounds: + addi $Tbl,$Tbl,`16*$SZ` +___ +for(;$i<32;$i++) { + &ROUND_16_xx($i,@V); + unshift(@V,pop(@V)); +} +$code.=<<___; + bdnz- Lrounds + + $POP $ctx,`$FRAME-$SIZE_T*22`($sp) + $POP $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer + $POP $num,`$FRAME-$SIZE_T*24`($sp) ; end pointer + subi $Tbl,$Tbl,`($rounds-16)*$SZ` ; rewind Tbl + + $LD r16,`0*$SZ`($ctx) + $LD r17,`1*$SZ`($ctx) + $LD r18,`2*$SZ`($ctx) + $LD r19,`3*$SZ`($ctx) + $LD r20,`4*$SZ`($ctx) + $LD r21,`5*$SZ`($ctx) + $LD r22,`6*$SZ`($ctx) + addi $inp,$inp,`16*$SZ` ; advance inp + $LD r23,`7*$SZ`($ctx) + add $A,$A,r16 + add $B,$B,r17 + $PUSH $inp,`$FRAME-$SIZE_T*23`($sp) + add $C,$C,r18 + $ST $A,`0*$SZ`($ctx) + add $D,$D,r19 + $ST $B,`1*$SZ`($ctx) + add $E,$E,r20 + $ST $C,`2*$SZ`($ctx) + add $F,$F,r21 + $ST $D,`3*$SZ`($ctx) + add $G,$G,r22 + $ST $E,`4*$SZ`($ctx) + add $H,$H,r23 + $ST $F,`5*$SZ`($ctx) + $ST $G,`6*$SZ`($ctx) + $UCMP $inp,$num + $ST $H,`7*$SZ`($ctx) + bne Lsha2_block_private + blr +___ + +# Ugly hack here, because PPC assembler syntax seem to vary too +# much from platforms to platform... +$code.=<<___; +.align 6 +LPICmeup: + bl LPIC + addi $Tbl,$Tbl,`64-4` ; "distance" between . and last nop + b LPICedup + nop + nop + nop + nop + nop +LPIC: mflr $Tbl + blr + nop + nop + nop + nop + nop + nop +___ +$code.=<<___ if ($SZ==8); + .long 0x428a2f98,0xd728ae22,0x71374491,0x23ef65cd + .long 0xb5c0fbcf,0xec4d3b2f,0xe9b5dba5,0x8189dbbc + .long 0x3956c25b,0xf348b538,0x59f111f1,0xb605d019 + .long 0x923f82a4,0xaf194f9b,0xab1c5ed5,0xda6d8118 + .long 0xd807aa98,0xa3030242,0x12835b01,0x45706fbe + .long 0x243185be,0x4ee4b28c,0x550c7dc3,0xd5ffb4e2 + .long 0x72be5d74,0xf27b896f,0x80deb1fe,0x3b1696b1 + .long 0x9bdc06a7,0x25c71235,0xc19bf174,0xcf692694 + .long 0xe49b69c1,0x9ef14ad2,0xefbe4786,0x384f25e3 + .long 0x0fc19dc6,0x8b8cd5b5,0x240ca1cc,0x77ac9c65 + .long 0x2de92c6f,0x592b0275,0x4a7484aa,0x6ea6e483 + .long 0x5cb0a9dc,0xbd41fbd4,0x76f988da,0x831153b5 + .long 0x983e5152,0xee66dfab,0xa831c66d,0x2db43210 + .long 0xb00327c8,0x98fb213f,0xbf597fc7,0xbeef0ee4 + .long 0xc6e00bf3,0x3da88fc2,0xd5a79147,0x930aa725 + .long 0x06ca6351,0xe003826f,0x14292967,0x0a0e6e70 + .long 0x27b70a85,0x46d22ffc,0x2e1b2138,0x5c26c926 + .long 0x4d2c6dfc,0x5ac42aed,0x53380d13,0x9d95b3df + .long 0x650a7354,0x8baf63de,0x766a0abb,0x3c77b2a8 + .long 0x81c2c92e,0x47edaee6,0x92722c85,0x1482353b + .long 0xa2bfe8a1,0x4cf10364,0xa81a664b,0xbc423001 + .long 0xc24b8b70,0xd0f89791,0xc76c51a3,0x0654be30 + .long 0xd192e819,0xd6ef5218,0xd6990624,0x5565a910 + .long 0xf40e3585,0x5771202a,0x106aa070,0x32bbd1b8 + .long 0x19a4c116,0xb8d2d0c8,0x1e376c08,0x5141ab53 + .long 0x2748774c,0xdf8eeb99,0x34b0bcb5,0xe19b48a8 + .long 0x391c0cb3,0xc5c95a63,0x4ed8aa4a,0xe3418acb + .long 0x5b9cca4f,0x7763e373,0x682e6ff3,0xd6b2b8a3 + .long 0x748f82ee,0x5defb2fc,0x78a5636f,0x43172f60 + .long 0x84c87814,0xa1f0ab72,0x8cc70208,0x1a6439ec + .long 0x90befffa,0x23631e28,0xa4506ceb,0xde82bde9 + .long 0xbef9a3f7,0xb2c67915,0xc67178f2,0xe372532b + .long 0xca273ece,0xea26619c,0xd186b8c7,0x21c0c207 + .long 0xeada7dd6,0xcde0eb1e,0xf57d4f7f,0xee6ed178 + .long 0x06f067aa,0x72176fba,0x0a637dc5,0xa2c898a6 + .long 0x113f9804,0xbef90dae,0x1b710b35,0x131c471b + .long 0x28db77f5,0x23047d84,0x32caab7b,0x40c72493 + .long 0x3c9ebe0a,0x15c9bebc,0x431d67c4,0x9c100d4c + .long 0x4cc5d4be,0xcb3e42b6,0x597f299c,0xfc657e2a + .long 0x5fcb6fab,0x3ad6faec,0x6c44198c,0x4a475817 +___ +$code.=<<___ if ($SZ==4); + .long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 + .long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 + .long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 + .long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 + .long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc + .long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da + .long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 + .long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 + .long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 + .long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 + .long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 + .long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 + .long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 + .long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 + .long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 + .long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 +___ + +$code =~ s/\`([^\`]*)\`/eval $1/gem; +print $code; +close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha512-s390x.pl b/app/openssl/crypto/sha/asm/sha512-s390x.pl new file mode 100644 index 00000000..e7ef2d5a --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha512-s390x.pl @@ -0,0 +1,301 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# SHA256/512 block procedures for s390x. + +# April 2007. +# +# sha256_block_data_order is reportedly >3 times faster than gcc 3.3 +# generated code (must be a bug in compiler, as improvement is +# "pathologically" high, in particular in comparison to other SHA +# modules). But the real twist is that it detects if hardware support +# for SHA256 is available and in such case utilizes it. Then the +# performance can reach >6.5x of assembler one for larger chunks. +# +# sha512_block_data_order is ~70% faster than gcc 3.3 generated code. + +# January 2009. +# +# Add support for hardware SHA512 and reschedule instructions to +# favour dual-issue z10 pipeline. Hardware SHA256/512 is ~4.7x faster +# than software. + +$t0="%r0"; +$t1="%r1"; +$ctx="%r2"; $t2="%r2"; +$inp="%r3"; +$len="%r4"; # used as index in inner loop + +$A="%r5"; +$B="%r6"; +$C="%r7"; +$D="%r8"; +$E="%r9"; +$F="%r10"; +$G="%r11"; +$H="%r12"; @V=($A,$B,$C,$D,$E,$F,$G,$H); +$tbl="%r13"; +$T1="%r14"; +$sp="%r15"; + +$output=shift; +open STDOUT,">$output"; + +if ($output =~ /512/) { + $label="512"; + $SZ=8; + $LD="lg"; # load from memory + $ST="stg"; # store to memory + $ADD="alg"; # add with memory operand + $ROT="rllg"; # rotate left + $SHR="srlg"; # logical right shift [see even at the end] + @Sigma0=(25,30,36); + @Sigma1=(23,46,50); + @sigma0=(56,63, 7); + @sigma1=( 3,45, 6); + $rounds=80; + $kimdfunc=3; # 0 means unknown/unsupported/unimplemented/disabled +} else { + $label="256"; + $SZ=4; + $LD="llgf"; # load from memory + $ST="st"; # store to memory + $ADD="al"; # add with memory operand + $ROT="rll"; # rotate left + $SHR="srl"; # logical right shift + @Sigma0=(10,19,30); + @Sigma1=( 7,21,26); + @sigma0=(14,25, 3); + @sigma1=(13,15,10); + $rounds=64; + $kimdfunc=2; # magic function code for kimd instruction +} +$Func="sha${label}_block_data_order"; +$Table="K${label}"; +$frame=160+16*$SZ; + +sub BODY_00_15 { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; + +$code.=<<___ if ($i<16); + $LD $T1,`$i*$SZ`($inp) ### $i +___ +$code.=<<___; + $ROT $t0,$e,$Sigma1[0] + $ROT $t1,$e,$Sigma1[1] + lgr $t2,$f + xgr $t0,$t1 + $ROT $t1,$t1,`$Sigma1[2]-$Sigma1[1]` + xgr $t2,$g + $ST $T1,`160+$SZ*($i%16)`($sp) + xgr $t0,$t1 # Sigma1(e) + la $T1,0($T1,$h) # T1+=h + ngr $t2,$e + lgr $t1,$a + algr $T1,$t0 # T1+=Sigma1(e) + $ROT $h,$a,$Sigma0[0] + xgr $t2,$g # Ch(e,f,g) + $ADD $T1,`$i*$SZ`($len,$tbl) # T1+=K[i] + $ROT $t0,$a,$Sigma0[1] + algr $T1,$t2 # T1+=Ch(e,f,g) + ogr $t1,$b + xgr $h,$t0 + lgr $t2,$a + ngr $t1,$c + $ROT $t0,$t0,`$Sigma0[2]-$Sigma0[1]` + xgr $h,$t0 # h=Sigma0(a) + ngr $t2,$b + algr $h,$T1 # h+=T1 + ogr $t2,$t1 # Maj(a,b,c) + la $d,0($d,$T1) # d+=T1 + algr $h,$t2 # h+=Maj(a,b,c) +___ +} + +sub BODY_16_XX { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; + +$code.=<<___; + $LD $T1,`160+$SZ*(($i+1)%16)`($sp) ### $i + $LD $t1,`160+$SZ*(($i+14)%16)`($sp) + $ROT $t0,$T1,$sigma0[0] + $SHR $T1,$sigma0[2] + $ROT $t2,$t0,`$sigma0[1]-$sigma0[0]` + xgr $T1,$t0 + $ROT $t0,$t1,$sigma1[0] + xgr $T1,$t2 # sigma0(X[i+1]) + $SHR $t1,$sigma1[2] + $ADD $T1,`160+$SZ*($i%16)`($sp) # +=X[i] + xgr $t1,$t0 + $ROT $t0,$t0,`$sigma1[1]-$sigma1[0]` + $ADD $T1,`160+$SZ*(($i+9)%16)`($sp) # +=X[i+9] + xgr $t1,$t0 # sigma1(X[i+14]) + algr $T1,$t1 # +=sigma1(X[i+14]) +___ + &BODY_00_15(@_); +} + +$code.=<<___; +.text +.align 64 +.type $Table,\@object +$Table: +___ +$code.=<<___ if ($SZ==4); + .long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 + .long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 + .long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 + .long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 + .long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc + .long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da + .long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 + .long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 + .long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 + .long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 + .long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 + .long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 + .long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 + .long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 + .long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 + .long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 +___ +$code.=<<___ if ($SZ==8); + .quad 0x428a2f98d728ae22,0x7137449123ef65cd + .quad 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc + .quad 0x3956c25bf348b538,0x59f111f1b605d019 + .quad 0x923f82a4af194f9b,0xab1c5ed5da6d8118 + .quad 0xd807aa98a3030242,0x12835b0145706fbe + .quad 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2 + .quad 0x72be5d74f27b896f,0x80deb1fe3b1696b1 + .quad 0x9bdc06a725c71235,0xc19bf174cf692694 + .quad 0xe49b69c19ef14ad2,0xefbe4786384f25e3 + .quad 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65 + .quad 0x2de92c6f592b0275,0x4a7484aa6ea6e483 + .quad 0x5cb0a9dcbd41fbd4,0x76f988da831153b5 + .quad 0x983e5152ee66dfab,0xa831c66d2db43210 + .quad 0xb00327c898fb213f,0xbf597fc7beef0ee4 + .quad 0xc6e00bf33da88fc2,0xd5a79147930aa725 + .quad 0x06ca6351e003826f,0x142929670a0e6e70 + .quad 0x27b70a8546d22ffc,0x2e1b21385c26c926 + .quad 0x4d2c6dfc5ac42aed,0x53380d139d95b3df + .quad 0x650a73548baf63de,0x766a0abb3c77b2a8 + .quad 0x81c2c92e47edaee6,0x92722c851482353b + .quad 0xa2bfe8a14cf10364,0xa81a664bbc423001 + .quad 0xc24b8b70d0f89791,0xc76c51a30654be30 + .quad 0xd192e819d6ef5218,0xd69906245565a910 + .quad 0xf40e35855771202a,0x106aa07032bbd1b8 + .quad 0x19a4c116b8d2d0c8,0x1e376c085141ab53 + .quad 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8 + .quad 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb + .quad 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3 + .quad 0x748f82ee5defb2fc,0x78a5636f43172f60 + .quad 0x84c87814a1f0ab72,0x8cc702081a6439ec + .quad 0x90befffa23631e28,0xa4506cebde82bde9 + .quad 0xbef9a3f7b2c67915,0xc67178f2e372532b + .quad 0xca273eceea26619c,0xd186b8c721c0c207 + .quad 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178 + .quad 0x06f067aa72176fba,0x0a637dc5a2c898a6 + .quad 0x113f9804bef90dae,0x1b710b35131c471b + .quad 0x28db77f523047d84,0x32caab7b40c72493 + .quad 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c + .quad 0x4cc5d4becb3e42b6,0x597f299cfc657e2a + .quad 0x5fcb6fab3ad6faec,0x6c44198c4a475817 +___ +$code.=<<___; +.size $Table,.-$Table +.globl $Func +.type $Func,\@function +$Func: +___ +$code.=<<___ if ($kimdfunc); + larl %r1,OPENSSL_s390xcap_P + lg %r0,0(%r1) + tmhl %r0,0x4000 # check for message-security assist + jz .Lsoftware + lghi %r0,0 + la %r1,16($sp) + .long 0xb93e0002 # kimd %r0,%r2 + lg %r0,16($sp) + tmhh %r0,`0x8000>>$kimdfunc` + jz .Lsoftware + lghi %r0,$kimdfunc + lgr %r1,$ctx + lgr %r2,$inp + sllg %r3,$len,`log(16*$SZ)/log(2)` + .long 0xb93e0002 # kimd %r0,%r2 + brc 1,.-4 # pay attention to "partial completion" + br %r14 +.align 16 +.Lsoftware: +___ +$code.=<<___; + sllg $len,$len,`log(16*$SZ)/log(2)` + lghi %r1,-$frame + agr $len,$inp + stmg $ctx,%r15,16($sp) + lgr %r0,$sp + la $sp,0(%r1,$sp) + stg %r0,0($sp) + + larl $tbl,$Table + $LD $A,`0*$SZ`($ctx) + $LD $B,`1*$SZ`($ctx) + $LD $C,`2*$SZ`($ctx) + $LD $D,`3*$SZ`($ctx) + $LD $E,`4*$SZ`($ctx) + $LD $F,`5*$SZ`($ctx) + $LD $G,`6*$SZ`($ctx) + $LD $H,`7*$SZ`($ctx) + +.Lloop: + lghi $len,0 +___ +for ($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } +$code.=".Lrounds_16_xx:\n"; +for (;$i<32;$i++) { &BODY_16_XX($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + aghi $len,`16*$SZ` + lghi $t0,`($rounds-16)*$SZ` + clgr $len,$t0 + jne .Lrounds_16_xx + + lg $ctx,`$frame+16`($sp) + la $inp,`16*$SZ`($inp) + $ADD $A,`0*$SZ`($ctx) + $ADD $B,`1*$SZ`($ctx) + $ADD $C,`2*$SZ`($ctx) + $ADD $D,`3*$SZ`($ctx) + $ADD $E,`4*$SZ`($ctx) + $ADD $F,`5*$SZ`($ctx) + $ADD $G,`6*$SZ`($ctx) + $ADD $H,`7*$SZ`($ctx) + $ST $A,`0*$SZ`($ctx) + $ST $B,`1*$SZ`($ctx) + $ST $C,`2*$SZ`($ctx) + $ST $D,`3*$SZ`($ctx) + $ST $E,`4*$SZ`($ctx) + $ST $F,`5*$SZ`($ctx) + $ST $G,`6*$SZ`($ctx) + $ST $H,`7*$SZ`($ctx) + clg $inp,`$frame+32`($sp) + jne .Lloop + + lmg %r6,%r15,`$frame+48`($sp) + br %r14 +.size $Func,.-$Func +.string "SHA${label} block transform for s390x, CRYPTOGAMS by <appro\@openssl.org>" +.comm OPENSSL_s390xcap_P,8,8 +___ + +$code =~ s/\`([^\`]*)\`/eval $1/gem; +# unlike 32-bit shift 64-bit one takes three arguments +$code =~ s/(srlg\s+)(%r[0-9]+),/$1$2,$2,/gm; + +print $code; +close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha512-sparcv9.pl b/app/openssl/crypto/sha/asm/sha512-sparcv9.pl new file mode 100644 index 00000000..ec5d7813 --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha512-sparcv9.pl @@ -0,0 +1,594 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== + +# SHA256 performance improvement over compiler generated code varies +# from 40% for Sun C [32-bit build] to 70% for gcc [3.3, 64-bit +# build]. Just like in SHA1 module I aim to ensure scalability on +# UltraSPARC T1 by packing X[16] to 8 64-bit registers. + +# SHA512 on pre-T1 UltraSPARC. +# +# Performance is >75% better than 64-bit code generated by Sun C and +# over 2x than 32-bit code. X[16] resides on stack, but access to it +# is scheduled for L2 latency and staged through 32 least significant +# bits of %l0-%l7. The latter is done to achieve 32-/64-bit ABI +# duality. Nevetheless it's ~40% faster than SHA256, which is pretty +# good [optimal coefficient is 50%]. +# +# SHA512 on UltraSPARC T1. +# +# It's not any faster than 64-bit code generated by Sun C 5.8. This is +# because 64-bit code generator has the advantage of using 64-bit +# loads(*) to access X[16], which I consciously traded for 32-/64-bit +# ABI duality [as per above]. But it surpasses 32-bit Sun C generated +# code by 60%, not to mention that it doesn't suffer from severe decay +# when running 4 times physical cores threads and that it leaves gcc +# [3.4] behind by over 4x factor! If compared to SHA256, single thread +# performance is only 10% better, but overall throughput for maximum +# amount of threads for given CPU exceeds corresponding one of SHA256 +# by 30% [again, optimal coefficient is 50%]. +# +# (*) Unlike pre-T1 UltraSPARC loads on T1 are executed strictly +# in-order, i.e. load instruction has to complete prior next +# instruction in given thread is executed, even if the latter is +# not dependent on load result! This means that on T1 two 32-bit +# loads are always slower than one 64-bit load. Once again this +# is unlike pre-T1 UltraSPARC, where, if scheduled appropriately, +# 2x32-bit loads can be as fast as 1x64-bit ones. + +$bits=32; +for (@ARGV) { $bits=64 if (/\-m64/ || /\-xarch\=v9/); } +if ($bits==64) { $bias=2047; $frame=192; } +else { $bias=0; $frame=112; } + +$output=shift; +open STDOUT,">$output"; + +if ($output =~ /512/) { + $label="512"; + $SZ=8; + $LD="ldx"; # load from memory + $ST="stx"; # store to memory + $SLL="sllx"; # shift left logical + $SRL="srlx"; # shift right logical + @Sigma0=(28,34,39); + @Sigma1=(14,18,41); + @sigma0=( 7, 1, 8); # right shift first + @sigma1=( 6,19,61); # right shift first + $lastK=0x817; + $rounds=80; + $align=4; + + $locals=16*$SZ; # X[16] + + $A="%o0"; + $B="%o1"; + $C="%o2"; + $D="%o3"; + $E="%o4"; + $F="%o5"; + $G="%g1"; + $H="%o7"; + @V=($A,$B,$C,$D,$E,$F,$G,$H); +} else { + $label="256"; + $SZ=4; + $LD="ld"; # load from memory + $ST="st"; # store to memory + $SLL="sll"; # shift left logical + $SRL="srl"; # shift right logical + @Sigma0=( 2,13,22); + @Sigma1=( 6,11,25); + @sigma0=( 3, 7,18); # right shift first + @sigma1=(10,17,19); # right shift first + $lastK=0x8f2; + $rounds=64; + $align=8; + + $locals=0; # X[16] is register resident + @X=("%o0","%o1","%o2","%o3","%o4","%o5","%g1","%o7"); + + $A="%l0"; + $B="%l1"; + $C="%l2"; + $D="%l3"; + $E="%l4"; + $F="%l5"; + $G="%l6"; + $H="%l7"; + @V=($A,$B,$C,$D,$E,$F,$G,$H); +} +$T1="%g2"; +$tmp0="%g3"; +$tmp1="%g4"; +$tmp2="%g5"; + +$ctx="%i0"; +$inp="%i1"; +$len="%i2"; +$Ktbl="%i3"; +$tmp31="%i4"; +$tmp32="%i5"; + +########### SHA256 +$Xload = sub { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_; + + if ($i==0) { +$code.=<<___; + ldx [$inp+0],@X[0] + ldx [$inp+16],@X[2] + ldx [$inp+32],@X[4] + ldx [$inp+48],@X[6] + ldx [$inp+8],@X[1] + ldx [$inp+24],@X[3] + subcc %g0,$tmp31,$tmp32 ! should be 64-$tmp31, but -$tmp31 works too + ldx [$inp+40],@X[5] + bz,pt %icc,.Laligned + ldx [$inp+56],@X[7] + + sllx @X[0],$tmp31,@X[0] + ldx [$inp+64],$T1 +___ +for($j=0;$j<7;$j++) +{ $code.=<<___; + srlx @X[$j+1],$tmp32,$tmp1 + sllx @X[$j+1],$tmp31,@X[$j+1] + or $tmp1,@X[$j],@X[$j] +___ +} +$code.=<<___; + srlx $T1,$tmp32,$T1 + or $T1,@X[7],@X[7] +.Laligned: +___ + } + + if ($i&1) { + $code.="\tadd @X[$i/2],$h,$T1\n"; + } else { + $code.="\tsrlx @X[$i/2],32,$T1\n\tadd $h,$T1,$T1\n"; + } +} if ($SZ==4); + +########### SHA512 +$Xload = sub { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_; +my @pair=("%l".eval(($i*2)%8),"%l".eval(($i*2)%8+1),"%l".eval((($i+1)*2)%8)); + +$code.=<<___ if ($i==0); + ld [$inp+0],%l0 + ld [$inp+4],%l1 + ld [$inp+8],%l2 + ld [$inp+12],%l3 + ld [$inp+16],%l4 + ld [$inp+20],%l5 + ld [$inp+24],%l6 + ld [$inp+28],%l7 +___ +$code.=<<___ if ($i<15); + sllx @pair[1],$tmp31,$tmp2 ! Xload($i) + add $tmp31,32,$tmp0 + sllx @pair[0],$tmp0,$tmp1 + `"ld [$inp+".eval(32+0+$i*8)."],@pair[0]" if ($i<12)` + srlx @pair[2],$tmp32,@pair[1] + or $tmp1,$tmp2,$tmp2 + or @pair[1],$tmp2,$tmp2 + `"ld [$inp+".eval(32+4+$i*8)."],@pair[1]" if ($i<12)` + add $h,$tmp2,$T1 + $ST $tmp2,[%sp+`$bias+$frame+$i*$SZ`] +___ +$code.=<<___ if ($i==12); + brnz,a $tmp31,.+8 + ld [$inp+128],%l0 +___ +$code.=<<___ if ($i==15); + ld [%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+0`],%l2 + sllx @pair[1],$tmp31,$tmp2 ! Xload($i) + add $tmp31,32,$tmp0 + ld [%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+4`],%l3 + sllx @pair[0],$tmp0,$tmp1 + ld [%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+0`],%l4 + srlx @pair[2],$tmp32,@pair[1] + or $tmp1,$tmp2,$tmp2 + ld [%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+4`],%l5 + or @pair[1],$tmp2,$tmp2 + ld [%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+0`],%l6 + add $h,$tmp2,$T1 + $ST $tmp2,[%sp+`$bias+$frame+$i*$SZ`] + ld [%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+4`],%l7 + ld [%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+0`],%l0 + ld [%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+4`],%l1 +___ +} if ($SZ==8); + +########### common +sub BODY_00_15 { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_; + + if ($i<16) { + &$Xload(@_); + } else { + $code.="\tadd $h,$T1,$T1\n"; + } + +$code.=<<___; + $SRL $e,@Sigma1[0],$h !! $i + xor $f,$g,$tmp2 + $SLL $e,`$SZ*8-@Sigma1[2]`,$tmp1 + and $e,$tmp2,$tmp2 + $SRL $e,@Sigma1[1],$tmp0 + xor $tmp1,$h,$h + $SLL $e,`$SZ*8-@Sigma1[1]`,$tmp1 + xor $tmp0,$h,$h + $SRL $e,@Sigma1[2],$tmp0 + xor $tmp1,$h,$h + $SLL $e,`$SZ*8-@Sigma1[0]`,$tmp1 + xor $tmp0,$h,$h + xor $g,$tmp2,$tmp2 ! Ch(e,f,g) + xor $tmp1,$h,$tmp0 ! Sigma1(e) + + $SRL $a,@Sigma0[0],$h + add $tmp2,$T1,$T1 + $LD [$Ktbl+`$i*$SZ`],$tmp2 ! K[$i] + $SLL $a,`$SZ*8-@Sigma0[2]`,$tmp1 + add $tmp0,$T1,$T1 + $SRL $a,@Sigma0[1],$tmp0 + xor $tmp1,$h,$h + $SLL $a,`$SZ*8-@Sigma0[1]`,$tmp1 + xor $tmp0,$h,$h + $SRL $a,@Sigma0[2],$tmp0 + xor $tmp1,$h,$h + $SLL $a,`$SZ*8-@Sigma0[0]`,$tmp1 + xor $tmp0,$h,$h + xor $tmp1,$h,$h ! Sigma0(a) + + or $a,$b,$tmp0 + and $a,$b,$tmp1 + and $c,$tmp0,$tmp0 + or $tmp0,$tmp1,$tmp1 ! Maj(a,b,c) + add $tmp2,$T1,$T1 ! +=K[$i] + add $tmp1,$h,$h + + add $T1,$d,$d + add $T1,$h,$h +___ +} + +########### SHA256 +$BODY_16_XX = sub { +my $i=@_[0]; +my $xi; + + if ($i&1) { + $xi=$tmp32; + $code.="\tsrlx @X[(($i+1)/2)%8],32,$xi\n"; + } else { + $xi=@X[(($i+1)/2)%8]; + } +$code.=<<___; + srl $xi,@sigma0[0],$T1 !! Xupdate($i) + sll $xi,`32-@sigma0[2]`,$tmp1 + srl $xi,@sigma0[1],$tmp0 + xor $tmp1,$T1,$T1 + sll $tmp1,`@sigma0[2]-@sigma0[1]`,$tmp1 + xor $tmp0,$T1,$T1 + srl $xi,@sigma0[2],$tmp0 + xor $tmp1,$T1,$T1 +___ + if ($i&1) { + $xi=@X[(($i+14)/2)%8]; + } else { + $xi=$tmp32; + $code.="\tsrlx @X[(($i+14)/2)%8],32,$xi\n"; + } +$code.=<<___; + srl $xi,@sigma1[0],$tmp2 + xor $tmp0,$T1,$T1 ! T1=sigma0(X[i+1]) + sll $xi,`32-@sigma1[2]`,$tmp1 + srl $xi,@sigma1[1],$tmp0 + xor $tmp1,$tmp2,$tmp2 + sll $tmp1,`@sigma1[2]-@sigma1[1]`,$tmp1 + xor $tmp0,$tmp2,$tmp2 + srl $xi,@sigma1[2],$tmp0 + xor $tmp1,$tmp2,$tmp2 +___ + if ($i&1) { + $xi=@X[($i/2)%8]; +$code.=<<___; + srlx @X[(($i+9)/2)%8],32,$tmp1 ! X[i+9] + xor $tmp0,$tmp2,$tmp2 ! sigma1(X[i+14]) + srl @X[($i/2)%8],0,$tmp0 + add $xi,$T1,$T1 ! +=X[i] + xor $tmp0,@X[($i/2)%8],@X[($i/2)%8] + add $tmp2,$T1,$T1 + add $tmp1,$T1,$T1 + + srl $T1,0,$T1 + or $T1,@X[($i/2)%8],@X[($i/2)%8] +___ + } else { + $xi=@X[(($i+9)/2)%8]; +$code.=<<___; + srlx @X[($i/2)%8],32,$tmp1 ! X[i] + xor $tmp0,$tmp2,$tmp2 ! sigma1(X[i+14]) + srl @X[($i/2)%8],0,@X[($i/2)%8] + add $xi,$T1,$T1 ! +=X[i+9] + add $tmp2,$T1,$T1 + add $tmp1,$T1,$T1 + + sllx $T1,32,$tmp0 + or $tmp0,@X[($i/2)%8],@X[($i/2)%8] +___ + } + &BODY_00_15(@_); +} if ($SZ==4); + +########### SHA512 +$BODY_16_XX = sub { +my $i=@_[0]; +my @pair=("%l".eval(($i*2)%8),"%l".eval(($i*2)%8+1)); + +$code.=<<___; + sllx %l2,32,$tmp0 !! Xupdate($i) + or %l3,$tmp0,$tmp0 + + srlx $tmp0,@sigma0[0],$T1 + ld [%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+0`],%l2 + sllx $tmp0,`64-@sigma0[2]`,$tmp1 + ld [%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+4`],%l3 + srlx $tmp0,@sigma0[1],$tmp0 + xor $tmp1,$T1,$T1 + sllx $tmp1,`@sigma0[2]-@sigma0[1]`,$tmp1 + xor $tmp0,$T1,$T1 + srlx $tmp0,`@sigma0[2]-@sigma0[1]`,$tmp0 + xor $tmp1,$T1,$T1 + sllx %l6,32,$tmp2 + xor $tmp0,$T1,$T1 ! sigma0(X[$i+1]) + or %l7,$tmp2,$tmp2 + + srlx $tmp2,@sigma1[0],$tmp1 + ld [%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+0`],%l6 + sllx $tmp2,`64-@sigma1[2]`,$tmp0 + ld [%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+4`],%l7 + srlx $tmp2,@sigma1[1],$tmp2 + xor $tmp0,$tmp1,$tmp1 + sllx $tmp0,`@sigma1[2]-@sigma1[1]`,$tmp0 + xor $tmp2,$tmp1,$tmp1 + srlx $tmp2,`@sigma1[2]-@sigma1[1]`,$tmp2 + xor $tmp0,$tmp1,$tmp1 + sllx %l4,32,$tmp0 + xor $tmp2,$tmp1,$tmp1 ! sigma1(X[$i+14]) + ld [%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+0`],%l4 + or %l5,$tmp0,$tmp0 + ld [%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+4`],%l5 + + sllx %l0,32,$tmp2 + add $tmp1,$T1,$T1 + ld [%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+0`],%l0 + or %l1,$tmp2,$tmp2 + add $tmp0,$T1,$T1 ! +=X[$i+9] + ld [%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+4`],%l1 + add $tmp2,$T1,$T1 ! +=X[$i] + $ST $T1,[%sp+`$bias+$frame+($i%16)*$SZ`] +___ + &BODY_00_15(@_); +} if ($SZ==8); + +$code.=<<___ if ($bits==64); +.register %g2,#scratch +.register %g3,#scratch +___ +$code.=<<___; +.section ".text",#alloc,#execinstr + +.align 64 +K${label}: +.type K${label},#object +___ +if ($SZ==4) { +$code.=<<___; + .long 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5 + .long 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5 + .long 0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3 + .long 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174 + .long 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc + .long 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da + .long 0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7 + .long 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967 + .long 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13 + .long 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85 + .long 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3 + .long 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070 + .long 0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5 + .long 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3 + .long 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208 + .long 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2 +___ +} else { +$code.=<<___; + .long 0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd + .long 0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc + .long 0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019 + .long 0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118 + .long 0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe + .long 0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2 + .long 0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1 + .long 0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694 + .long 0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3 + .long 0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65 + .long 0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483 + .long 0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5 + .long 0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210 + .long 0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4 + .long 0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725 + .long 0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70 + .long 0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926 + .long 0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df + .long 0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8 + .long 0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b + .long 0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001 + .long 0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30 + .long 0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910 + .long 0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8 + .long 0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53 + .long 0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8 + .long 0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb + .long 0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3 + .long 0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60 + .long 0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec + .long 0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9 + .long 0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b + .long 0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207 + .long 0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178 + .long 0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6 + .long 0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b + .long 0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493 + .long 0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c + .long 0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a + .long 0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817 +___ +} +$code.=<<___; +.size K${label},.-K${label} +.globl sha${label}_block_data_order +sha${label}_block_data_order: + save %sp,`-$frame-$locals`,%sp + and $inp,`$align-1`,$tmp31 + sllx $len,`log(16*$SZ)/log(2)`,$len + andn $inp,`$align-1`,$inp + sll $tmp31,3,$tmp31 + add $inp,$len,$len +___ +$code.=<<___ if ($SZ==8); # SHA512 + mov 32,$tmp32 + sub $tmp32,$tmp31,$tmp32 +___ +$code.=<<___; +.Lpic: call .+8 + add %o7,K${label}-.Lpic,$Ktbl + + $LD [$ctx+`0*$SZ`],$A + $LD [$ctx+`1*$SZ`],$B + $LD [$ctx+`2*$SZ`],$C + $LD [$ctx+`3*$SZ`],$D + $LD [$ctx+`4*$SZ`],$E + $LD [$ctx+`5*$SZ`],$F + $LD [$ctx+`6*$SZ`],$G + $LD [$ctx+`7*$SZ`],$H + +.Lloop: +___ +for ($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } +$code.=".L16_xx:\n"; +for (;$i<32;$i++) { &$BODY_16_XX($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + and $tmp2,0xfff,$tmp2 + cmp $tmp2,$lastK + bne .L16_xx + add $Ktbl,`16*$SZ`,$Ktbl ! Ktbl+=16 + +___ +$code.=<<___ if ($SZ==4); # SHA256 + $LD [$ctx+`0*$SZ`],@X[0] + $LD [$ctx+`1*$SZ`],@X[1] + $LD [$ctx+`2*$SZ`],@X[2] + $LD [$ctx+`3*$SZ`],@X[3] + $LD [$ctx+`4*$SZ`],@X[4] + $LD [$ctx+`5*$SZ`],@X[5] + $LD [$ctx+`6*$SZ`],@X[6] + $LD [$ctx+`7*$SZ`],@X[7] + + add $A,@X[0],$A + $ST $A,[$ctx+`0*$SZ`] + add $B,@X[1],$B + $ST $B,[$ctx+`1*$SZ`] + add $C,@X[2],$C + $ST $C,[$ctx+`2*$SZ`] + add $D,@X[3],$D + $ST $D,[$ctx+`3*$SZ`] + add $E,@X[4],$E + $ST $E,[$ctx+`4*$SZ`] + add $F,@X[5],$F + $ST $F,[$ctx+`5*$SZ`] + add $G,@X[6],$G + $ST $G,[$ctx+`6*$SZ`] + add $H,@X[7],$H + $ST $H,[$ctx+`7*$SZ`] +___ +$code.=<<___ if ($SZ==8); # SHA512 + ld [$ctx+`0*$SZ+0`],%l0 + ld [$ctx+`0*$SZ+4`],%l1 + ld [$ctx+`1*$SZ+0`],%l2 + ld [$ctx+`1*$SZ+4`],%l3 + ld [$ctx+`2*$SZ+0`],%l4 + ld [$ctx+`2*$SZ+4`],%l5 + ld [$ctx+`3*$SZ+0`],%l6 + + sllx %l0,32,$tmp0 + ld [$ctx+`3*$SZ+4`],%l7 + sllx %l2,32,$tmp1 + or %l1,$tmp0,$tmp0 + or %l3,$tmp1,$tmp1 + add $tmp0,$A,$A + add $tmp1,$B,$B + $ST $A,[$ctx+`0*$SZ`] + sllx %l4,32,$tmp2 + $ST $B,[$ctx+`1*$SZ`] + sllx %l6,32,$T1 + or %l5,$tmp2,$tmp2 + or %l7,$T1,$T1 + add $tmp2,$C,$C + $ST $C,[$ctx+`2*$SZ`] + add $T1,$D,$D + $ST $D,[$ctx+`3*$SZ`] + + ld [$ctx+`4*$SZ+0`],%l0 + ld [$ctx+`4*$SZ+4`],%l1 + ld [$ctx+`5*$SZ+0`],%l2 + ld [$ctx+`5*$SZ+4`],%l3 + ld [$ctx+`6*$SZ+0`],%l4 + ld [$ctx+`6*$SZ+4`],%l5 + ld [$ctx+`7*$SZ+0`],%l6 + + sllx %l0,32,$tmp0 + ld [$ctx+`7*$SZ+4`],%l7 + sllx %l2,32,$tmp1 + or %l1,$tmp0,$tmp0 + or %l3,$tmp1,$tmp1 + add $tmp0,$E,$E + add $tmp1,$F,$F + $ST $E,[$ctx+`4*$SZ`] + sllx %l4,32,$tmp2 + $ST $F,[$ctx+`5*$SZ`] + sllx %l6,32,$T1 + or %l5,$tmp2,$tmp2 + or %l7,$T1,$T1 + add $tmp2,$G,$G + $ST $G,[$ctx+`6*$SZ`] + add $T1,$H,$H + $ST $H,[$ctx+`7*$SZ`] +___ +$code.=<<___; + add $inp,`16*$SZ`,$inp ! advance inp + cmp $inp,$len + bne `$bits==64?"%xcc":"%icc"`,.Lloop + sub $Ktbl,`($rounds-16)*$SZ`,$Ktbl ! rewind Ktbl + + ret + restore +.type sha${label}_block_data_order,#function +.size sha${label}_block_data_order,(.-sha${label}_block_data_order) +.asciz "SHA${label} block transform for SPARCv9, CRYPTOGAMS by <appro\@openssl.org>" +.align 4 +___ + +$code =~ s/\`([^\`]*)\`/eval $1/gem; +print $code; +close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha512-x86_64.pl b/app/openssl/crypto/sha/asm/sha512-x86_64.pl new file mode 100755 index 00000000..e6643f8c --- /dev/null +++ b/app/openssl/crypto/sha/asm/sha512-x86_64.pl @@ -0,0 +1,456 @@ +#!/usr/bin/env perl +# +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. Rights for redistribution and usage in source and binary +# forms are granted according to the OpenSSL license. +# ==================================================================== +# +# sha256/512_block procedure for x86_64. +# +# 40% improvement over compiler-generated code on Opteron. On EM64T +# sha256 was observed to run >80% faster and sha512 - >40%. No magical +# tricks, just straight implementation... I really wonder why gcc +# [being armed with inline assembler] fails to generate as fast code. +# The only thing which is cool about this module is that it's very +# same instruction sequence used for both SHA-256 and SHA-512. In +# former case the instructions operate on 32-bit operands, while in +# latter - on 64-bit ones. All I had to do is to get one flavor right, +# the other one passed the test right away:-) +# +# sha256_block runs in ~1005 cycles on Opteron, which gives you +# asymptotic performance of 64*1000/1005=63.7MBps times CPU clock +# frequency in GHz. sha512_block runs in ~1275 cycles, which results +# in 128*1000/1275=100MBps per GHz. Is there room for improvement? +# Well, if you compare it to IA-64 implementation, which maintains +# X[16] in register bank[!], tends to 4 instructions per CPU clock +# cycle and runs in 1003 cycles, 1275 is very good result for 3-way +# issue Opteron pipeline and X[16] maintained in memory. So that *if* +# there is a way to improve it, *then* the only way would be to try to +# offload X[16] updates to SSE unit, but that would require "deeper" +# loop unroll, which in turn would naturally cause size blow-up, not +# to mention increased complexity! And once again, only *if* it's +# actually possible to noticeably improve overall ILP, instruction +# level parallelism, on a given CPU implementation in this case. +# +# Special note on Intel EM64T. While Opteron CPU exhibits perfect +# perfromance ratio of 1.5 between 64- and 32-bit flavors [see above], +# [currently available] EM64T CPUs apparently are far from it. On the +# contrary, 64-bit version, sha512_block, is ~30% *slower* than 32-bit +# sha256_block:-( This is presumably because 64-bit shifts/rotates +# apparently are not atomic instructions, but implemented in microcode. + +$flavour = shift; +$output = shift; +if ($flavour =~ /\./) { $output = $flavour; undef $flavour; } + +$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/); + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or +( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or +die "can't locate x86_64-xlate.pl"; + +open STDOUT,"| $^X $xlate $flavour $output"; + +if ($output =~ /512/) { + $func="sha512_block_data_order"; + $TABLE="K512"; + $SZ=8; + @ROT=($A,$B,$C,$D,$E,$F,$G,$H)=("%rax","%rbx","%rcx","%rdx", + "%r8", "%r9", "%r10","%r11"); + ($T1,$a0,$a1,$a2)=("%r12","%r13","%r14","%r15"); + @Sigma0=(28,34,39); + @Sigma1=(14,18,41); + @sigma0=(1, 8, 7); + @sigma1=(19,61, 6); + $rounds=80; +} else { + $func="sha256_block_data_order"; + $TABLE="K256"; + $SZ=4; + @ROT=($A,$B,$C,$D,$E,$F,$G,$H)=("%eax","%ebx","%ecx","%edx", + "%r8d","%r9d","%r10d","%r11d"); + ($T1,$a0,$a1,$a2)=("%r12d","%r13d","%r14d","%r15d"); + @Sigma0=( 2,13,22); + @Sigma1=( 6,11,25); + @sigma0=( 7,18, 3); + @sigma1=(17,19,10); + $rounds=64; +} + +$ctx="%rdi"; # 1st arg +$round="%rdi"; # zaps $ctx +$inp="%rsi"; # 2nd arg +$Tbl="%rbp"; + +$_ctx="16*$SZ+0*8(%rsp)"; +$_inp="16*$SZ+1*8(%rsp)"; +$_end="16*$SZ+2*8(%rsp)"; +$_rsp="16*$SZ+3*8(%rsp)"; +$framesz="16*$SZ+4*8"; + + +sub ROUND_00_15() +{ my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; + +$code.=<<___; + mov $e,$a0 + mov $e,$a1 + mov $f,$a2 + + ror \$$Sigma1[0],$a0 + ror \$$Sigma1[1],$a1 + xor $g,$a2 # f^g + + xor $a1,$a0 + ror \$`$Sigma1[2]-$Sigma1[1]`,$a1 + and $e,$a2 # (f^g)&e + mov $T1,`$SZ*($i&0xf)`(%rsp) + + xor $a1,$a0 # Sigma1(e) + xor $g,$a2 # Ch(e,f,g)=((f^g)&e)^g + add $h,$T1 # T1+=h + + mov $a,$h + add $a0,$T1 # T1+=Sigma1(e) + + add $a2,$T1 # T1+=Ch(e,f,g) + mov $a,$a0 + mov $a,$a1 + + ror \$$Sigma0[0],$h + ror \$$Sigma0[1],$a0 + mov $a,$a2 + add ($Tbl,$round,$SZ),$T1 # T1+=K[round] + + xor $a0,$h + ror \$`$Sigma0[2]-$Sigma0[1]`,$a0 + or $c,$a1 # a|c + + xor $a0,$h # h=Sigma0(a) + and $c,$a2 # a&c + add $T1,$d # d+=T1 + + and $b,$a1 # (a|c)&b + add $T1,$h # h+=T1 + + or $a2,$a1 # Maj(a,b,c)=((a|c)&b)|(a&c) + lea 1($round),$round # round++ + + add $a1,$h # h+=Maj(a,b,c) +___ +} + +sub ROUND_16_XX() +{ my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; + +$code.=<<___; + mov `$SZ*(($i+1)&0xf)`(%rsp),$a0 + mov `$SZ*(($i+14)&0xf)`(%rsp),$T1 + + mov $a0,$a2 + + shr \$$sigma0[2],$a0 + ror \$$sigma0[0],$a2 + + xor $a2,$a0 + ror \$`$sigma0[1]-$sigma0[0]`,$a2 + + xor $a2,$a0 # sigma0(X[(i+1)&0xf]) + mov $T1,$a1 + + shr \$$sigma1[2],$T1 + ror \$$sigma1[0],$a1 + + xor $a1,$T1 + ror \$`$sigma1[1]-$sigma1[0]`,$a1 + + xor $a1,$T1 # sigma1(X[(i+14)&0xf]) + + add $a0,$T1 + + add `$SZ*(($i+9)&0xf)`(%rsp),$T1 + + add `$SZ*($i&0xf)`(%rsp),$T1 +___ + &ROUND_00_15(@_); +} + +$code=<<___; +.text + +.globl $func +.type $func,\@function,4 +.align 16 +$func: + push %rbx + push %rbp + push %r12 + push %r13 + push %r14 + push %r15 + mov %rsp,%r11 # copy %rsp + shl \$4,%rdx # num*16 + sub \$$framesz,%rsp + lea ($inp,%rdx,$SZ),%rdx # inp+num*16*$SZ + and \$-64,%rsp # align stack frame + mov $ctx,$_ctx # save ctx, 1st arg + mov $inp,$_inp # save inp, 2nd arh + mov %rdx,$_end # save end pointer, "3rd" arg + mov %r11,$_rsp # save copy of %rsp +.Lprologue: + + lea $TABLE(%rip),$Tbl + + mov $SZ*0($ctx),$A + mov $SZ*1($ctx),$B + mov $SZ*2($ctx),$C + mov $SZ*3($ctx),$D + mov $SZ*4($ctx),$E + mov $SZ*5($ctx),$F + mov $SZ*6($ctx),$G + mov $SZ*7($ctx),$H + jmp .Lloop + +.align 16 +.Lloop: + xor $round,$round +___ + for($i=0;$i<16;$i++) { + $code.=" mov $SZ*$i($inp),$T1\n"; + $code.=" bswap $T1\n"; + &ROUND_00_15($i,@ROT); + unshift(@ROT,pop(@ROT)); + } +$code.=<<___; + jmp .Lrounds_16_xx +.align 16 +.Lrounds_16_xx: +___ + for(;$i<32;$i++) { + &ROUND_16_XX($i,@ROT); + unshift(@ROT,pop(@ROT)); + } + +$code.=<<___; + cmp \$$rounds,$round + jb .Lrounds_16_xx + + mov $_ctx,$ctx + lea 16*$SZ($inp),$inp + + add $SZ*0($ctx),$A + add $SZ*1($ctx),$B + add $SZ*2($ctx),$C + add $SZ*3($ctx),$D + add $SZ*4($ctx),$E + add $SZ*5($ctx),$F + add $SZ*6($ctx),$G + add $SZ*7($ctx),$H + + cmp $_end,$inp + + mov $A,$SZ*0($ctx) + mov $B,$SZ*1($ctx) + mov $C,$SZ*2($ctx) + mov $D,$SZ*3($ctx) + mov $E,$SZ*4($ctx) + mov $F,$SZ*5($ctx) + mov $G,$SZ*6($ctx) + mov $H,$SZ*7($ctx) + jb .Lloop + + mov $_rsp,%rsi + mov (%rsi),%r15 + mov 8(%rsi),%r14 + mov 16(%rsi),%r13 + mov 24(%rsi),%r12 + mov 32(%rsi),%rbp + mov 40(%rsi),%rbx + lea 48(%rsi),%rsp +.Lepilogue: + ret +.size $func,.-$func +___ + +if ($SZ==4) { +$code.=<<___; +.align 64 +.type $TABLE,\@object +$TABLE: + .long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 + .long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 + .long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 + .long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 + .long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc + .long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da + .long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 + .long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 + .long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 + .long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 + .long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 + .long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 + .long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 + .long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 + .long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 + .long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 +___ +} else { +$code.=<<___; +.align 64 +.type $TABLE,\@object +$TABLE: + .quad 0x428a2f98d728ae22,0x7137449123ef65cd + .quad 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc + .quad 0x3956c25bf348b538,0x59f111f1b605d019 + .quad 0x923f82a4af194f9b,0xab1c5ed5da6d8118 + .quad 0xd807aa98a3030242,0x12835b0145706fbe + .quad 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2 + .quad 0x72be5d74f27b896f,0x80deb1fe3b1696b1 + .quad 0x9bdc06a725c71235,0xc19bf174cf692694 + .quad 0xe49b69c19ef14ad2,0xefbe4786384f25e3 + .quad 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65 + .quad 0x2de92c6f592b0275,0x4a7484aa6ea6e483 + .quad 0x5cb0a9dcbd41fbd4,0x76f988da831153b5 + .quad 0x983e5152ee66dfab,0xa831c66d2db43210 + .quad 0xb00327c898fb213f,0xbf597fc7beef0ee4 + .quad 0xc6e00bf33da88fc2,0xd5a79147930aa725 + .quad 0x06ca6351e003826f,0x142929670a0e6e70 + .quad 0x27b70a8546d22ffc,0x2e1b21385c26c926 + .quad 0x4d2c6dfc5ac42aed,0x53380d139d95b3df + .quad 0x650a73548baf63de,0x766a0abb3c77b2a8 + .quad 0x81c2c92e47edaee6,0x92722c851482353b + .quad 0xa2bfe8a14cf10364,0xa81a664bbc423001 + .quad 0xc24b8b70d0f89791,0xc76c51a30654be30 + .quad 0xd192e819d6ef5218,0xd69906245565a910 + .quad 0xf40e35855771202a,0x106aa07032bbd1b8 + .quad 0x19a4c116b8d2d0c8,0x1e376c085141ab53 + .quad 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8 + .quad 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb + .quad 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3 + .quad 0x748f82ee5defb2fc,0x78a5636f43172f60 + .quad 0x84c87814a1f0ab72,0x8cc702081a6439ec + .quad 0x90befffa23631e28,0xa4506cebde82bde9 + .quad 0xbef9a3f7b2c67915,0xc67178f2e372532b + .quad 0xca273eceea26619c,0xd186b8c721c0c207 + .quad 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178 + .quad 0x06f067aa72176fba,0x0a637dc5a2c898a6 + .quad 0x113f9804bef90dae,0x1b710b35131c471b + .quad 0x28db77f523047d84,0x32caab7b40c72493 + .quad 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c + .quad 0x4cc5d4becb3e42b6,0x597f299cfc657e2a + .quad 0x5fcb6fab3ad6faec,0x6c44198c4a475817 +___ +} + +# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame, +# CONTEXT *context,DISPATCHER_CONTEXT *disp) +if ($win64) { +$rec="%rcx"; +$frame="%rdx"; +$context="%r8"; +$disp="%r9"; + +$code.=<<___; +.extern __imp_RtlVirtualUnwind +.type se_handler,\@abi-omnipotent +.align 16 +se_handler: + push %rsi + push %rdi + push %rbx + push %rbp + push %r12 + push %r13 + push %r14 + push %r15 + pushfq + sub \$64,%rsp + + mov 120($context),%rax # pull context->Rax + mov 248($context),%rbx # pull context->Rip + + lea .Lprologue(%rip),%r10 + cmp %r10,%rbx # context->Rip<.Lprologue + jb .Lin_prologue + + mov 152($context),%rax # pull context->Rsp + + lea .Lepilogue(%rip),%r10 + cmp %r10,%rbx # context->Rip>=.Lepilogue + jae .Lin_prologue + + mov 16*$SZ+3*8(%rax),%rax # pull $_rsp + lea 48(%rax),%rax + + mov -8(%rax),%rbx + mov -16(%rax),%rbp + mov -24(%rax),%r12 + mov -32(%rax),%r13 + mov -40(%rax),%r14 + mov -48(%rax),%r15 + mov %rbx,144($context) # restore context->Rbx + mov %rbp,160($context) # restore context->Rbp + mov %r12,216($context) # restore context->R12 + mov %r13,224($context) # restore context->R13 + mov %r14,232($context) # restore context->R14 + mov %r15,240($context) # restore context->R15 + +.Lin_prologue: + mov 8(%rax),%rdi + mov 16(%rax),%rsi + mov %rax,152($context) # restore context->Rsp + mov %rsi,168($context) # restore context->Rsi + mov %rdi,176($context) # restore context->Rdi + + mov 40($disp),%rdi # disp->ContextRecord + mov $context,%rsi # context + mov \$154,%ecx # sizeof(CONTEXT) + .long 0xa548f3fc # cld; rep movsq + + mov $disp,%rsi + xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER + mov 8(%rsi),%rdx # arg2, disp->ImageBase + mov 0(%rsi),%r8 # arg3, disp->ControlPc + mov 16(%rsi),%r9 # arg4, disp->FunctionEntry + mov 40(%rsi),%r10 # disp->ContextRecord + lea 56(%rsi),%r11 # &disp->HandlerData + lea 24(%rsi),%r12 # &disp->EstablisherFrame + mov %r10,32(%rsp) # arg5 + mov %r11,40(%rsp) # arg6 + mov %r12,48(%rsp) # arg7 + mov %rcx,56(%rsp) # arg8, (NULL) + call *__imp_RtlVirtualUnwind(%rip) + + mov \$1,%eax # ExceptionContinueSearch + add \$64,%rsp + popfq + pop %r15 + pop %r14 + pop %r13 + pop %r12 + pop %rbp + pop %rbx + pop %rdi + pop %rsi + ret +.size se_handler,.-se_handler + +.section .pdata +.align 4 + .rva .LSEH_begin_$func + .rva .LSEH_end_$func + .rva .LSEH_info_$func + +.section .xdata +.align 8 +.LSEH_info_$func: + .byte 9,0,0,0 + .rva se_handler +___ +} + +$code =~ s/\`([^\`]*)\`/eval $1/gem; +print $code; +close STDOUT; diff --git a/app/openssl/crypto/sha/sha.c b/app/openssl/crypto/sha/sha.c new file mode 100644 index 00000000..42126551 --- /dev/null +++ b/app/openssl/crypto/sha/sha.c @@ -0,0 +1,124 @@ +/* crypto/sha/sha.c */ +/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) + * All rights reserved. + * + * This package is an SSL implementation written + * by Eric Young (eay@cryptsoft.com). + * The implementation was written so as to conform with Netscapes SSL. + * + * This library is free for commercial and non-commercial use as long as + * the following conditions are aheared to. The following conditions + * apply to all code found in this distribution, be it the RC4, RSA, + * lhash, DES, etc., code; not just the SSL code. The SSL documentation + * included with this distribution is covered by the same copyright terms + * except that the holder is Tim Hudson (tjh@cryptsoft.com). + * + * Copyright remains Eric Young's, and as such any Copyright notices in + * the code are not to be removed. + * If this package is used in a product, Eric Young should be given attribution + * as the author of the parts of the library used. + * This can be in the form of a textual message at program startup or + * in documentation (online or textual) provided with the package. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * "This product includes cryptographic software written by + * Eric Young (eay@cryptsoft.com)" + * The word 'cryptographic' can be left out if the rouines from the library + * being used are not cryptographic related :-). + * 4. If you include any Windows specific code (or a derivative thereof) from + * the apps directory (application code) you must include an acknowledgement: + * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" + * + * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * The licence and distribution terms for any publically available version or + * derivative of this code cannot be changed. i.e. this code cannot simply be + * copied and put under another distribution licence + * [including the GNU Public Licence.] + */ + +#include <stdio.h> +#include <stdlib.h> +#include <openssl/sha.h> + +#define BUFSIZE 1024*16 + +void do_fp(FILE *f); +void pt(unsigned char *md); +int read(int, void *, unsigned int); +int main(int argc, char **argv) + { + int i,err=0; + FILE *IN; + + if (argc == 1) + { + do_fp(stdin); + } + else + { + for (i=1; i<argc; i++) + { + IN=fopen(argv[i],"r"); + if (IN == NULL) + { + perror(argv[i]); + err++; + continue; + } + printf("SHA(%s)= ",argv[i]); + do_fp(IN); + fclose(IN); + } + } + exit(err); + } + +void do_fp(FILE *f) + { + SHA_CTX c; + unsigned char md[SHA_DIGEST_LENGTH]; + int fd; + int i; + unsigned char buf[BUFSIZE]; + + fd=fileno(f); + SHA_Init(&c); + for (;;) + { + i=read(fd,buf,BUFSIZE); + if (i <= 0) break; + SHA_Update(&c,buf,(unsigned long)i); + } + SHA_Final(&(md[0]),&c); + pt(md); + } + +void pt(unsigned char *md) + { + int i; + + for (i=0; i<SHA_DIGEST_LENGTH; i++) + printf("%02x",md[i]); + printf("\n"); + } + diff --git a/app/openssl/crypto/sha/sha.h b/app/openssl/crypto/sha/sha.h new file mode 100644 index 00000000..16cacf9f --- /dev/null +++ b/app/openssl/crypto/sha/sha.h @@ -0,0 +1,200 @@ +/* crypto/sha/sha.h */ +/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) + * All rights reserved. + * + * This package is an SSL implementation written + * by Eric Young (eay@cryptsoft.com). + * The implementation was written so as to conform with Netscapes SSL. + * + * This library is free for commercial and non-commercial use as long as + * the following conditions are aheared to. The following conditions + * apply to all code found in this distribution, be it the RC4, RSA, + * lhash, DES, etc., code; not just the SSL code. The SSL documentation + * included with this distribution is covered by the same copyright terms + * except that the holder is Tim Hudson (tjh@cryptsoft.com). + * + * Copyright remains Eric Young's, and as such any Copyright notices in + * the code are not to be removed. + * If this package is used in a product, Eric Young should be given attribution + * as the author of the parts of the library used. + * This can be in the form of a textual message at program startup or + * in documentation (online or textual) provided with the package. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * "This product includes cryptographic software written by + * Eric Young (eay@cryptsoft.com)" + * The word 'cryptographic' can be left out if the rouines from the library + * being used are not cryptographic related :-). + * 4. If you include any Windows specific code (or a derivative thereof) from + * the apps directory (application code) you must include an acknowledgement: + * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" + * + * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * The licence and distribution terms for any publically available version or + * derivative of this code cannot be changed. i.e. this code cannot simply be + * copied and put under another distribution licence + * [including the GNU Public Licence.] + */ + +#ifndef HEADER_SHA_H +#define HEADER_SHA_H + +#include <openssl/e_os2.h> +#include <stddef.h> + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(OPENSSL_NO_SHA) || (defined(OPENSSL_NO_SHA0) && defined(OPENSSL_NO_SHA1)) +#error SHA is disabled. +#endif + +#if defined(OPENSSL_FIPS) +#define FIPS_SHA_SIZE_T size_t +#endif + +/* + * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + * ! SHA_LONG has to be at least 32 bits wide. If it's wider, then ! + * ! SHA_LONG_LOG2 has to be defined along. ! + * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + */ + +#if defined(__LP32__) +#define SHA_LONG unsigned long +#elif defined(OPENSSL_SYS_CRAY) || defined(__ILP64__) +#define SHA_LONG unsigned long +#define SHA_LONG_LOG2 3 +#else +#define SHA_LONG unsigned int +#endif + +#define SHA_LBLOCK 16 +#define SHA_CBLOCK (SHA_LBLOCK*4) /* SHA treats input data as a + * contiguous array of 32 bit + * wide big-endian values. */ +#define SHA_LAST_BLOCK (SHA_CBLOCK-8) +#define SHA_DIGEST_LENGTH 20 + +typedef struct SHAstate_st + { + SHA_LONG h0,h1,h2,h3,h4; + SHA_LONG Nl,Nh; + SHA_LONG data[SHA_LBLOCK]; + unsigned int num; + } SHA_CTX; + +#ifndef OPENSSL_NO_SHA0 +int SHA_Init(SHA_CTX *c); +int SHA_Update(SHA_CTX *c, const void *data, size_t len); +int SHA_Final(unsigned char *md, SHA_CTX *c); +unsigned char *SHA(const unsigned char *d, size_t n, unsigned char *md); +void SHA_Transform(SHA_CTX *c, const unsigned char *data); +#endif +#ifndef OPENSSL_NO_SHA1 +int SHA1_Init(SHA_CTX *c); +int SHA1_Update(SHA_CTX *c, const void *data, size_t len); +int SHA1_Final(unsigned char *md, SHA_CTX *c); +unsigned char *SHA1(const unsigned char *d, size_t n, unsigned char *md); +void SHA1_Transform(SHA_CTX *c, const unsigned char *data); +#endif + +#define SHA256_CBLOCK (SHA_LBLOCK*4) /* SHA-256 treats input data as a + * contiguous array of 32 bit + * wide big-endian values. */ +#define SHA224_DIGEST_LENGTH 28 +#define SHA256_DIGEST_LENGTH 32 + +typedef struct SHA256state_st + { + SHA_LONG h[8]; + SHA_LONG Nl,Nh; + SHA_LONG data[SHA_LBLOCK]; + unsigned int num,md_len; + } SHA256_CTX; + +#ifndef OPENSSL_NO_SHA256 +int SHA224_Init(SHA256_CTX *c); +int SHA224_Update(SHA256_CTX *c, const void *data, size_t len); +int SHA224_Final(unsigned char *md, SHA256_CTX *c); +unsigned char *SHA224(const unsigned char *d, size_t n,unsigned char *md); +int SHA256_Init(SHA256_CTX *c); +int SHA256_Update(SHA256_CTX *c, const void *data, size_t len); +int SHA256_Final(unsigned char *md, SHA256_CTX *c); +unsigned char *SHA256(const unsigned char *d, size_t n,unsigned char *md); +void SHA256_Transform(SHA256_CTX *c, const unsigned char *data); +#endif + +#define SHA384_DIGEST_LENGTH 48 +#define SHA512_DIGEST_LENGTH 64 + +#ifndef OPENSSL_NO_SHA512 +/* + * Unlike 32-bit digest algorithms, SHA-512 *relies* on SHA_LONG64 + * being exactly 64-bit wide. See Implementation Notes in sha512.c + * for further details. + */ +#define SHA512_CBLOCK (SHA_LBLOCK*8) /* SHA-512 treats input data as a + * contiguous array of 64 bit + * wide big-endian values. */ +#if (defined(_WIN32) || defined(_WIN64)) && !defined(__MINGW32__) +#define SHA_LONG64 unsigned __int64 +#define U64(C) C##UI64 +#elif defined(__arch64__) +#define SHA_LONG64 unsigned long +#define U64(C) C##UL +#else +#define SHA_LONG64 unsigned long long +#define U64(C) C##ULL +#endif + +typedef struct SHA512state_st + { + SHA_LONG64 h[8]; + SHA_LONG64 Nl,Nh; + union { + SHA_LONG64 d[SHA_LBLOCK]; + unsigned char p[SHA512_CBLOCK]; + } u; + unsigned int num,md_len; + } SHA512_CTX; +#endif + +#ifndef OPENSSL_NO_SHA512 +int SHA384_Init(SHA512_CTX *c); +int SHA384_Update(SHA512_CTX *c, const void *data, size_t len); +int SHA384_Final(unsigned char *md, SHA512_CTX *c); +unsigned char *SHA384(const unsigned char *d, size_t n,unsigned char *md); +int SHA512_Init(SHA512_CTX *c); +int SHA512_Update(SHA512_CTX *c, const void *data, size_t len); +int SHA512_Final(unsigned char *md, SHA512_CTX *c); +unsigned char *SHA512(const unsigned char *d, size_t n,unsigned char *md); +void SHA512_Transform(SHA512_CTX *c, const unsigned char *data); +#endif + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/app/openssl/crypto/sha/sha1.c b/app/openssl/crypto/sha/sha1.c new file mode 100644 index 00000000..d350c88e --- /dev/null +++ b/app/openssl/crypto/sha/sha1.c @@ -0,0 +1,127 @@ +/* crypto/sha/sha1.c */ +/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) + * All rights reserved. + * + * This package is an SSL implementation written + * by Eric Young (eay@cryptsoft.com). + * The implementation was written so as to conform with Netscapes SSL. + * + * This library is free for commercial and non-commercial use as long as + * the following conditions are aheared to. The following conditions + * apply to all code found in this distribution, be it the RC4, RSA, + * lhash, DES, etc., code; not just the SSL code. The SSL documentation + * included with this distribution is covered by the same copyright terms + * except that the holder is Tim Hudson (tjh@cryptsoft.com). + * + * Copyright remains Eric Young's, and as such any Copyright notices in + * the code are not to be removed. + * If this package is used in a product, Eric Young should be given attribution + * as the author of the parts of the library used. + * This can be in the form of a textual message at program startup or + * in documentation (online or textual) provided with the package. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * "This product includes cryptographic software written by + * Eric Young (eay@cryptsoft.com)" + * The word 'cryptographic' can be left out if the rouines from the library + * being used are not cryptographic related :-). + * 4. If you include any Windows specific code (or a derivative thereof) from + * the apps directory (application code) you must include an acknowledgement: + * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" + * + * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * The licence and distribution terms for any publically available version or + * derivative of this code cannot be changed. i.e. this code cannot simply be + * copied and put under another distribution licence + * [including the GNU Public Licence.] + */ + +#include <stdio.h> +#include <stdlib.h> +#include <openssl/sha.h> + +#define BUFSIZE 1024*16 + +void do_fp(FILE *f); +void pt(unsigned char *md); +#ifndef _OSD_POSIX +int read(int, void *, unsigned int); +#endif + +int main(int argc, char **argv) + { + int i,err=0; + FILE *IN; + + if (argc == 1) + { + do_fp(stdin); + } + else + { + for (i=1; i<argc; i++) + { + IN=fopen(argv[i],"r"); + if (IN == NULL) + { + perror(argv[i]); + err++; + continue; + } + printf("SHA1(%s)= ",argv[i]); + do_fp(IN); + fclose(IN); + } + } + exit(err); + } + +void do_fp(FILE *f) + { + SHA_CTX c; + unsigned char md[SHA_DIGEST_LENGTH]; + int fd; + int i; + unsigned char buf[BUFSIZE]; + + fd=fileno(f); + SHA1_Init(&c); + for (;;) + { + i=read(fd,buf,BUFSIZE); + if (i <= 0) break; + SHA1_Update(&c,buf,(unsigned long)i); + } + SHA1_Final(&(md[0]),&c); + pt(md); + } + +void pt(unsigned char *md) + { + int i; + + for (i=0; i<SHA_DIGEST_LENGTH; i++) + printf("%02x",md[i]); + printf("\n"); + } + diff --git a/app/openssl/crypto/sha/sha1_one.c b/app/openssl/crypto/sha/sha1_one.c new file mode 100644 index 00000000..7c65b602 --- /dev/null +++ b/app/openssl/crypto/sha/sha1_one.c @@ -0,0 +1,78 @@ +/* crypto/sha/sha1_one.c */ +/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) + * All rights reserved. + * + * This package is an SSL implementation written + * by Eric Young (eay@cryptsoft.com). + * The implementation was written so as to conform with Netscapes SSL. + * + * This library is free for commercial and non-commercial use as long as + * the following conditions are aheared to. The following conditions + * apply to all code found in this distribution, be it the RC4, RSA, + * lhash, DES, etc., code; not just the SSL code. The SSL documentation + * included with this distribution is covered by the same copyright terms + * except that the holder is Tim Hudson (tjh@cryptsoft.com). + * + * Copyright remains Eric Young's, and as such any Copyright notices in + * the code are not to be removed. + * If this package is used in a product, Eric Young should be given attribution + * as the author of the parts of the library used. + * This can be in the form of a textual message at program startup or + * in documentation (online or textual) provided with the package. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * "This product includes cryptographic software written by + * Eric Young (eay@cryptsoft.com)" + * The word 'cryptographic' can be left out if the rouines from the library + * being used are not cryptographic related :-). + * 4. If you include any Windows specific code (or a derivative thereof) from + * the apps directory (application code) you must include an acknowledgement: + * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" + * + * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * The licence and distribution terms for any publically available version or + * derivative of this code cannot be changed. i.e. this code cannot simply be + * copied and put under another distribution licence + * [including the GNU Public Licence.] + */ + +#include <stdio.h> +#include <string.h> +#include <openssl/sha.h> +#include <openssl/crypto.h> + +#ifndef OPENSSL_NO_SHA1 +unsigned char *SHA1(const unsigned char *d, size_t n, unsigned char *md) + { + SHA_CTX c; + static unsigned char m[SHA_DIGEST_LENGTH]; + + if (md == NULL) md=m; + if (!SHA1_Init(&c)) + return NULL; + SHA1_Update(&c,d,n); + SHA1_Final(md,&c); + OPENSSL_cleanse(&c,sizeof(c)); + return(md); + } +#endif diff --git a/app/openssl/crypto/sha/sha1dgst.c b/app/openssl/crypto/sha/sha1dgst.c new file mode 100644 index 00000000..50d1925c --- /dev/null +++ b/app/openssl/crypto/sha/sha1dgst.c @@ -0,0 +1,74 @@ +/* crypto/sha/sha1dgst.c */ +/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) + * All rights reserved. + * + * This package is an SSL implementation written + * by Eric Young (eay@cryptsoft.com). + * The implementation was written so as to conform with Netscapes SSL. + * + * This library is free for commercial and non-commercial use as long as + * the following conditions are aheared to. The following conditions + * apply to all code found in this distribution, be it the RC4, RSA, + * lhash, DES, etc., code; not just the SSL code. The SSL documentation + * included with this distribution is covered by the same copyright terms + * except that the holder is Tim Hudson (tjh@cryptsoft.com). + * + * Copyright remains Eric Young's, and as such any Copyright notices in + * the code are not to be removed. + * If this package is used in a product, Eric Young should be given attribution + * as the author of the parts of the library used. + * This can be in the form of a textual message at program startup or + * in documentation (online or textual) provided with the package. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * "This product includes cryptographic software written by + * Eric Young (eay@cryptsoft.com)" + * The word 'cryptographic' can be left out if the rouines from the library + * being used are not cryptographic related :-). + * 4. If you include any Windows specific code (or a derivative thereof) from + * the apps directory (application code) you must include an acknowledgement: + * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" + * + * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * The licence and distribution terms for any publically available version or + * derivative of this code cannot be changed. i.e. this code cannot simply be + * copied and put under another distribution licence + * [including the GNU Public Licence.] + */ + +#include <openssl/opensslconf.h> +#if !defined(OPENSSL_NO_SHA1) && !defined(OPENSSL_NO_SHA) + +#undef SHA_0 +#define SHA_1 + +#include <openssl/opensslv.h> + +const char SHA1_version[]="SHA1" OPENSSL_VERSION_PTEXT; + +/* The implementation is in ../md32_common.h */ + +#include "sha_locl.h" + +#endif + diff --git a/app/openssl/crypto/sha/sha1test.c b/app/openssl/crypto/sha/sha1test.c new file mode 100644 index 00000000..6feb3964 --- /dev/null +++ b/app/openssl/crypto/sha/sha1test.c @@ -0,0 +1,178 @@ +/* crypto/sha/sha1test.c */ +/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) + * All rights reserved. + * + * This package is an SSL implementation written + * by Eric Young (eay@cryptsoft.com). + * The implementation was written so as to conform with Netscapes SSL. + * + * This library is free for commercial and non-commercial use as long as + * the following conditions are aheared to. The following conditions + * apply to all code found in this distribution, be it the RC4, RSA, + * lhash, DES, etc., code; not just the SSL code. The SSL documentation + * included with this distribution is covered by the same copyright terms + * except that the holder is Tim Hudson (tjh@cryptsoft.com). + * + * Copyright remains Eric Young's, and as such any Copyright notices in + * the code are not to be removed. + * If this package is used in a product, Eric Young should be given attribution + * as the author of the parts of the library used. + * This can be in the form of a textual message at program startup or + * in documentation (online or textual) provided with the package. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * "This product includes cryptographic software written by + * Eric Young (eay@cryptsoft.com)" + * The word 'cryptographic' can be left out if the rouines from the library + * being used are not cryptographic related :-). + * 4. If you include any Windows specific code (or a derivative thereof) from + * the apps directory (application code) you must include an acknowledgement: + * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" + * + * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * The licence and distribution terms for any publically available version or + * derivative of this code cannot be changed. i.e. this code cannot simply be + * copied and put under another distribution licence + * [including the GNU Public Licence.] + */ + +#include <stdio.h> +#include <string.h> +#include <stdlib.h> + +#include "../e_os.h" + +#ifdef OPENSSL_NO_SHA +int main(int argc, char *argv[]) +{ + printf("No SHA support\n"); + return(0); +} +#else +#include <openssl/evp.h> +#include <openssl/sha.h> + +#ifdef CHARSET_EBCDIC +#include <openssl/ebcdic.h> +#endif + +#undef SHA_0 /* FIPS 180 */ +#define SHA_1 /* FIPS 180-1 */ + +static char *test[]={ + "abc", + "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq", + NULL, + }; + +#ifdef SHA_0 +static char *ret[]={ + "0164b8a914cd2a5e74c4f7ff082c4d97f1edf880", + "d2516ee1acfa5baf33dfc1c471e438449ef134c8", + }; +static char *bigret= + "3232affa48628a26653b5aaa44541fd90d690603"; +#endif +#ifdef SHA_1 +static char *ret[]={ + "a9993e364706816aba3e25717850c26c9cd0d89d", + "84983e441c3bd26ebaae4aa1f95129e5e54670f1", + }; +static char *bigret= + "34aa973cd4c4daa4f61eeb2bdbad27316534016f"; +#endif + +static char *pt(unsigned char *md); +int main(int argc, char *argv[]) + { + int i,err=0; + char **P,**R; + static unsigned char buf[1000]; + char *p,*r; + EVP_MD_CTX c; + unsigned char md[SHA_DIGEST_LENGTH]; + +#ifdef CHARSET_EBCDIC + ebcdic2ascii(test[0], test[0], strlen(test[0])); + ebcdic2ascii(test[1], test[1], strlen(test[1])); +#endif + + EVP_MD_CTX_init(&c); + P=test; + R=ret; + i=1; + while (*P != NULL) + { + EVP_Digest(*P,strlen((char *)*P),md,NULL,EVP_sha1(), NULL); + p=pt(md); + if (strcmp(p,(char *)*R) != 0) + { + printf("error calculating SHA1 on '%s'\n",*P); + printf("got %s instead of %s\n",p,*R); + err++; + } + else + printf("test %d ok\n",i); + i++; + R++; + P++; + } + + memset(buf,'a',1000); +#ifdef CHARSET_EBCDIC + ebcdic2ascii(buf, buf, 1000); +#endif /*CHARSET_EBCDIC*/ + EVP_DigestInit_ex(&c,EVP_sha1(), NULL); + for (i=0; i<1000; i++) + EVP_DigestUpdate(&c,buf,1000); + EVP_DigestFinal_ex(&c,md,NULL); + p=pt(md); + + r=bigret; + if (strcmp(p,r) != 0) + { + printf("error calculating SHA1 on 'a' * 1000\n"); + printf("got %s instead of %s\n",p,r); + err++; + } + else + printf("test 3 ok\n"); + +#ifdef OPENSSL_SYS_NETWARE + if (err) printf("ERROR: %d\n", err); +#endif + EXIT(err); + EVP_MD_CTX_cleanup(&c); + return(0); + } + +static char *pt(unsigned char *md) + { + int i; + static char buf[80]; + + for (i=0; i<SHA_DIGEST_LENGTH; i++) + sprintf(&(buf[i*2]),"%02x",md[i]); + return(buf); + } +#endif diff --git a/app/openssl/crypto/sha/sha256.c b/app/openssl/crypto/sha/sha256.c new file mode 100644 index 00000000..8952d876 --- /dev/null +++ b/app/openssl/crypto/sha/sha256.c @@ -0,0 +1,282 @@ +/* crypto/sha/sha256.c */ +/* ==================================================================== + * Copyright (c) 2004 The OpenSSL Project. All rights reserved + * according to the OpenSSL license [found in ../../LICENSE]. + * ==================================================================== + */ +#include <openssl/opensslconf.h> +#if !defined(OPENSSL_NO_SHA) && !defined(OPENSSL_NO_SHA256) + +#include <stdlib.h> +#include <string.h> + +#include <openssl/crypto.h> +#include <openssl/sha.h> +#include <openssl/opensslv.h> + +const char SHA256_version[]="SHA-256" OPENSSL_VERSION_PTEXT; + +int SHA224_Init (SHA256_CTX *c) + { + memset (c,0,sizeof(*c)); + c->h[0]=0xc1059ed8UL; c->h[1]=0x367cd507UL; + c->h[2]=0x3070dd17UL; c->h[3]=0xf70e5939UL; + c->h[4]=0xffc00b31UL; c->h[5]=0x68581511UL; + c->h[6]=0x64f98fa7UL; c->h[7]=0xbefa4fa4UL; + c->md_len=SHA224_DIGEST_LENGTH; + return 1; + } + +int SHA256_Init (SHA256_CTX *c) + { + memset (c,0,sizeof(*c)); + c->h[0]=0x6a09e667UL; c->h[1]=0xbb67ae85UL; + c->h[2]=0x3c6ef372UL; c->h[3]=0xa54ff53aUL; + c->h[4]=0x510e527fUL; c->h[5]=0x9b05688cUL; + c->h[6]=0x1f83d9abUL; c->h[7]=0x5be0cd19UL; + c->md_len=SHA256_DIGEST_LENGTH; + return 1; + } + +unsigned char *SHA224(const unsigned char *d, size_t n, unsigned char *md) + { + SHA256_CTX c; + static unsigned char m[SHA224_DIGEST_LENGTH]; + + if (md == NULL) md=m; + SHA224_Init(&c); + SHA256_Update(&c,d,n); + SHA256_Final(md,&c); + OPENSSL_cleanse(&c,sizeof(c)); + return(md); + } + +unsigned char *SHA256(const unsigned char *d, size_t n, unsigned char *md) + { + SHA256_CTX c; + static unsigned char m[SHA256_DIGEST_LENGTH]; + + if (md == NULL) md=m; + SHA256_Init(&c); + SHA256_Update(&c,d,n); + SHA256_Final(md,&c); + OPENSSL_cleanse(&c,sizeof(c)); + return(md); + } + +int SHA224_Update(SHA256_CTX *c, const void *data, size_t len) +{ return SHA256_Update (c,data,len); } +int SHA224_Final (unsigned char *md, SHA256_CTX *c) +{ return SHA256_Final (md,c); } + +#define DATA_ORDER_IS_BIG_ENDIAN + +#define HASH_LONG SHA_LONG +#define HASH_CTX SHA256_CTX +#define HASH_CBLOCK SHA_CBLOCK +/* + * Note that FIPS180-2 discusses "Truncation of the Hash Function Output." + * default: case below covers for it. It's not clear however if it's + * permitted to truncate to amount of bytes not divisible by 4. I bet not, + * but if it is, then default: case shall be extended. For reference. + * Idea behind separate cases for pre-defined lenghts is to let the + * compiler decide if it's appropriate to unroll small loops. + */ +#define HASH_MAKE_STRING(c,s) do { \ + unsigned long ll; \ + unsigned int nn; \ + switch ((c)->md_len) \ + { case SHA224_DIGEST_LENGTH: \ + for (nn=0;nn<SHA224_DIGEST_LENGTH/4;nn++) \ + { ll=(c)->h[nn]; HOST_l2c(ll,(s)); } \ + break; \ + case SHA256_DIGEST_LENGTH: \ + for (nn=0;nn<SHA256_DIGEST_LENGTH/4;nn++) \ + { ll=(c)->h[nn]; HOST_l2c(ll,(s)); } \ + break; \ + default: \ + if ((c)->md_len > SHA256_DIGEST_LENGTH) \ + return 0; \ + for (nn=0;nn<(c)->md_len/4;nn++) \ + { ll=(c)->h[nn]; HOST_l2c(ll,(s)); } \ + break; \ + } \ + } while (0) + +#define HASH_UPDATE SHA256_Update +#define HASH_TRANSFORM SHA256_Transform +#define HASH_FINAL SHA256_Final +#define HASH_BLOCK_DATA_ORDER sha256_block_data_order +#ifndef SHA256_ASM +static +#endif +void sha256_block_data_order (SHA256_CTX *ctx, const void *in, size_t num); + +#include "md32_common.h" + +#ifndef SHA256_ASM +static const SHA_LONG K256[64] = { + 0x428a2f98UL,0x71374491UL,0xb5c0fbcfUL,0xe9b5dba5UL, + 0x3956c25bUL,0x59f111f1UL,0x923f82a4UL,0xab1c5ed5UL, + 0xd807aa98UL,0x12835b01UL,0x243185beUL,0x550c7dc3UL, + 0x72be5d74UL,0x80deb1feUL,0x9bdc06a7UL,0xc19bf174UL, + 0xe49b69c1UL,0xefbe4786UL,0x0fc19dc6UL,0x240ca1ccUL, + 0x2de92c6fUL,0x4a7484aaUL,0x5cb0a9dcUL,0x76f988daUL, + 0x983e5152UL,0xa831c66dUL,0xb00327c8UL,0xbf597fc7UL, + 0xc6e00bf3UL,0xd5a79147UL,0x06ca6351UL,0x14292967UL, + 0x27b70a85UL,0x2e1b2138UL,0x4d2c6dfcUL,0x53380d13UL, + 0x650a7354UL,0x766a0abbUL,0x81c2c92eUL,0x92722c85UL, + 0xa2bfe8a1UL,0xa81a664bUL,0xc24b8b70UL,0xc76c51a3UL, + 0xd192e819UL,0xd6990624UL,0xf40e3585UL,0x106aa070UL, + 0x19a4c116UL,0x1e376c08UL,0x2748774cUL,0x34b0bcb5UL, + 0x391c0cb3UL,0x4ed8aa4aUL,0x5b9cca4fUL,0x682e6ff3UL, + 0x748f82eeUL,0x78a5636fUL,0x84c87814UL,0x8cc70208UL, + 0x90befffaUL,0xa4506cebUL,0xbef9a3f7UL,0xc67178f2UL }; + +/* + * FIPS specification refers to right rotations, while our ROTATE macro + * is left one. This is why you might notice that rotation coefficients + * differ from those observed in FIPS document by 32-N... + */ +#define Sigma0(x) (ROTATE((x),30) ^ ROTATE((x),19) ^ ROTATE((x),10)) +#define Sigma1(x) (ROTATE((x),26) ^ ROTATE((x),21) ^ ROTATE((x),7)) +#define sigma0(x) (ROTATE((x),25) ^ ROTATE((x),14) ^ ((x)>>3)) +#define sigma1(x) (ROTATE((x),15) ^ ROTATE((x),13) ^ ((x)>>10)) + +#define Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z))) +#define Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) + +#ifdef OPENSSL_SMALL_FOOTPRINT + +static void sha256_block_data_order (SHA256_CTX *ctx, const void *in, size_t num) + { + unsigned MD32_REG_T a,b,c,d,e,f,g,h,s0,s1,T1,T2; + SHA_LONG X[16],l; + int i; + const unsigned char *data=in; + + while (num--) { + + a = ctx->h[0]; b = ctx->h[1]; c = ctx->h[2]; d = ctx->h[3]; + e = ctx->h[4]; f = ctx->h[5]; g = ctx->h[6]; h = ctx->h[7]; + + for (i=0;i<16;i++) + { + HOST_c2l(data,l); T1 = X[i] = l; + T1 += h + Sigma1(e) + Ch(e,f,g) + K256[i]; + T2 = Sigma0(a) + Maj(a,b,c); + h = g; g = f; f = e; e = d + T1; + d = c; c = b; b = a; a = T1 + T2; + } + + for (;i<64;i++) + { + s0 = X[(i+1)&0x0f]; s0 = sigma0(s0); + s1 = X[(i+14)&0x0f]; s1 = sigma1(s1); + + T1 = X[i&0xf] += s0 + s1 + X[(i+9)&0xf]; + T1 += h + Sigma1(e) + Ch(e,f,g) + K256[i]; + T2 = Sigma0(a) + Maj(a,b,c); + h = g; g = f; f = e; e = d + T1; + d = c; c = b; b = a; a = T1 + T2; + } + + ctx->h[0] += a; ctx->h[1] += b; ctx->h[2] += c; ctx->h[3] += d; + ctx->h[4] += e; ctx->h[5] += f; ctx->h[6] += g; ctx->h[7] += h; + + } +} + +#else + +#define ROUND_00_15(i,a,b,c,d,e,f,g,h) do { \ + T1 += h + Sigma1(e) + Ch(e,f,g) + K256[i]; \ + h = Sigma0(a) + Maj(a,b,c); \ + d += T1; h += T1; } while (0) + +#define ROUND_16_63(i,a,b,c,d,e,f,g,h,X) do { \ + s0 = X[(i+1)&0x0f]; s0 = sigma0(s0); \ + s1 = X[(i+14)&0x0f]; s1 = sigma1(s1); \ + T1 = X[(i)&0x0f] += s0 + s1 + X[(i+9)&0x0f]; \ + ROUND_00_15(i,a,b,c,d,e,f,g,h); } while (0) + +static void sha256_block_data_order (SHA256_CTX *ctx, const void *in, size_t num) + { + unsigned MD32_REG_T a,b,c,d,e,f,g,h,s0,s1,T1; + SHA_LONG X[16]; + int i; + const unsigned char *data=in; + const union { long one; char little; } is_endian = {1}; + + while (num--) { + + a = ctx->h[0]; b = ctx->h[1]; c = ctx->h[2]; d = ctx->h[3]; + e = ctx->h[4]; f = ctx->h[5]; g = ctx->h[6]; h = ctx->h[7]; + + if (!is_endian.little && sizeof(SHA_LONG)==4 && ((size_t)in%4)==0) + { + const SHA_LONG *W=(const SHA_LONG *)data; + + T1 = X[0] = W[0]; ROUND_00_15(0,a,b,c,d,e,f,g,h); + T1 = X[1] = W[1]; ROUND_00_15(1,h,a,b,c,d,e,f,g); + T1 = X[2] = W[2]; ROUND_00_15(2,g,h,a,b,c,d,e,f); + T1 = X[3] = W[3]; ROUND_00_15(3,f,g,h,a,b,c,d,e); + T1 = X[4] = W[4]; ROUND_00_15(4,e,f,g,h,a,b,c,d); + T1 = X[5] = W[5]; ROUND_00_15(5,d,e,f,g,h,a,b,c); + T1 = X[6] = W[6]; ROUND_00_15(6,c,d,e,f,g,h,a,b); + T1 = X[7] = W[7]; ROUND_00_15(7,b,c,d,e,f,g,h,a); + T1 = X[8] = W[8]; ROUND_00_15(8,a,b,c,d,e,f,g,h); + T1 = X[9] = W[9]; ROUND_00_15(9,h,a,b,c,d,e,f,g); + T1 = X[10] = W[10]; ROUND_00_15(10,g,h,a,b,c,d,e,f); + T1 = X[11] = W[11]; ROUND_00_15(11,f,g,h,a,b,c,d,e); + T1 = X[12] = W[12]; ROUND_00_15(12,e,f,g,h,a,b,c,d); + T1 = X[13] = W[13]; ROUND_00_15(13,d,e,f,g,h,a,b,c); + T1 = X[14] = W[14]; ROUND_00_15(14,c,d,e,f,g,h,a,b); + T1 = X[15] = W[15]; ROUND_00_15(15,b,c,d,e,f,g,h,a); + + data += SHA256_CBLOCK; + } + else + { + SHA_LONG l; + + HOST_c2l(data,l); T1 = X[0] = l; ROUND_00_15(0,a,b,c,d,e,f,g,h); + HOST_c2l(data,l); T1 = X[1] = l; ROUND_00_15(1,h,a,b,c,d,e,f,g); + HOST_c2l(data,l); T1 = X[2] = l; ROUND_00_15(2,g,h,a,b,c,d,e,f); + HOST_c2l(data,l); T1 = X[3] = l; ROUND_00_15(3,f,g,h,a,b,c,d,e); + HOST_c2l(data,l); T1 = X[4] = l; ROUND_00_15(4,e,f,g,h,a,b,c,d); + HOST_c2l(data,l); T1 = X[5] = l; ROUND_00_15(5,d,e,f,g,h,a,b,c); + HOST_c2l(data,l); T1 = X[6] = l; ROUND_00_15(6,c,d,e,f,g,h,a,b); + HOST_c2l(data,l); T1 = X[7] = l; ROUND_00_15(7,b,c,d,e,f,g,h,a); + HOST_c2l(data,l); T1 = X[8] = l; ROUND_00_15(8,a,b,c,d,e,f,g,h); + HOST_c2l(data,l); T1 = X[9] = l; ROUND_00_15(9,h,a,b,c,d,e,f,g); + HOST_c2l(data,l); T1 = X[10] = l; ROUND_00_15(10,g,h,a,b,c,d,e,f); + HOST_c2l(data,l); T1 = X[11] = l; ROUND_00_15(11,f,g,h,a,b,c,d,e); + HOST_c2l(data,l); T1 = X[12] = l; ROUND_00_15(12,e,f,g,h,a,b,c,d); + HOST_c2l(data,l); T1 = X[13] = l; ROUND_00_15(13,d,e,f,g,h,a,b,c); + HOST_c2l(data,l); T1 = X[14] = l; ROUND_00_15(14,c,d,e,f,g,h,a,b); + HOST_c2l(data,l); T1 = X[15] = l; ROUND_00_15(15,b,c,d,e,f,g,h,a); + } + + for (i=16;i<64;i+=8) + { + ROUND_16_63(i+0,a,b,c,d,e,f,g,h,X); + ROUND_16_63(i+1,h,a,b,c,d,e,f,g,X); + ROUND_16_63(i+2,g,h,a,b,c,d,e,f,X); + ROUND_16_63(i+3,f,g,h,a,b,c,d,e,X); + ROUND_16_63(i+4,e,f,g,h,a,b,c,d,X); + ROUND_16_63(i+5,d,e,f,g,h,a,b,c,X); + ROUND_16_63(i+6,c,d,e,f,g,h,a,b,X); + ROUND_16_63(i+7,b,c,d,e,f,g,h,a,X); + } + + ctx->h[0] += a; ctx->h[1] += b; ctx->h[2] += c; ctx->h[3] += d; + ctx->h[4] += e; ctx->h[5] += f; ctx->h[6] += g; ctx->h[7] += h; + + } + } + +#endif +#endif /* SHA256_ASM */ + +#endif /* OPENSSL_NO_SHA256 */ diff --git a/app/openssl/crypto/sha/sha256t.c b/app/openssl/crypto/sha/sha256t.c new file mode 100644 index 00000000..6b4a3bd0 --- /dev/null +++ b/app/openssl/crypto/sha/sha256t.c @@ -0,0 +1,147 @@ +/* crypto/sha/sha256t.c */ +/* ==================================================================== + * Copyright (c) 2004 The OpenSSL Project. All rights reserved. + * ==================================================================== + */ +#include <stdio.h> +#include <string.h> +#include <stdlib.h> + +#include <openssl/sha.h> +#include <openssl/evp.h> + +#if defined(OPENSSL_NO_SHA) || defined(OPENSSL_NO_SHA256) +int main(int argc, char *argv[]) +{ + printf("No SHA256 support\n"); + return(0); +} +#else + +unsigned char app_b1[SHA256_DIGEST_LENGTH] = { + 0xba,0x78,0x16,0xbf,0x8f,0x01,0xcf,0xea, + 0x41,0x41,0x40,0xde,0x5d,0xae,0x22,0x23, + 0xb0,0x03,0x61,0xa3,0x96,0x17,0x7a,0x9c, + 0xb4,0x10,0xff,0x61,0xf2,0x00,0x15,0xad }; + +unsigned char app_b2[SHA256_DIGEST_LENGTH] = { + 0x24,0x8d,0x6a,0x61,0xd2,0x06,0x38,0xb8, + 0xe5,0xc0,0x26,0x93,0x0c,0x3e,0x60,0x39, + 0xa3,0x3c,0xe4,0x59,0x64,0xff,0x21,0x67, + 0xf6,0xec,0xed,0xd4,0x19,0xdb,0x06,0xc1 }; + +unsigned char app_b3[SHA256_DIGEST_LENGTH] = { + 0xcd,0xc7,0x6e,0x5c,0x99,0x14,0xfb,0x92, + 0x81,0xa1,0xc7,0xe2,0x84,0xd7,0x3e,0x67, + 0xf1,0x80,0x9a,0x48,0xa4,0x97,0x20,0x0e, + 0x04,0x6d,0x39,0xcc,0xc7,0x11,0x2c,0xd0 }; + +unsigned char addenum_1[SHA224_DIGEST_LENGTH] = { + 0x23,0x09,0x7d,0x22,0x34,0x05,0xd8,0x22, + 0x86,0x42,0xa4,0x77,0xbd,0xa2,0x55,0xb3, + 0x2a,0xad,0xbc,0xe4,0xbd,0xa0,0xb3,0xf7, + 0xe3,0x6c,0x9d,0xa7 }; + +unsigned char addenum_2[SHA224_DIGEST_LENGTH] = { + 0x75,0x38,0x8b,0x16,0x51,0x27,0x76,0xcc, + 0x5d,0xba,0x5d,0xa1,0xfd,0x89,0x01,0x50, + 0xb0,0xc6,0x45,0x5c,0xb4,0xf5,0x8b,0x19, + 0x52,0x52,0x25,0x25 }; + +unsigned char addenum_3[SHA224_DIGEST_LENGTH] = { + 0x20,0x79,0x46,0x55,0x98,0x0c,0x91,0xd8, + 0xbb,0xb4,0xc1,0xea,0x97,0x61,0x8a,0x4b, + 0xf0,0x3f,0x42,0x58,0x19,0x48,0xb2,0xee, + 0x4e,0xe7,0xad,0x67 }; + +int main (int argc,char **argv) +{ unsigned char md[SHA256_DIGEST_LENGTH]; + int i; + EVP_MD_CTX evp; + + fprintf(stdout,"Testing SHA-256 "); + + EVP_Digest ("abc",3,md,NULL,EVP_sha256(),NULL); + if (memcmp(md,app_b1,sizeof(app_b1))) + { fflush(stdout); + fprintf(stderr,"\nTEST 1 of 3 failed.\n"); + return 1; + } + else + fprintf(stdout,"."); fflush(stdout); + + EVP_Digest ("abcdbcde""cdefdefg""efghfghi""ghijhijk" + "ijkljklm""klmnlmno""mnopnopq",56,md,NULL,EVP_sha256(),NULL); + if (memcmp(md,app_b2,sizeof(app_b2))) + { fflush(stdout); + fprintf(stderr,"\nTEST 2 of 3 failed.\n"); + return 1; + } + else + fprintf(stdout,"."); fflush(stdout); + + EVP_MD_CTX_init (&evp); + EVP_DigestInit_ex (&evp,EVP_sha256(),NULL); + for (i=0;i<1000000;i+=160) + EVP_DigestUpdate (&evp, "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa", + (1000000-i)<160?1000000-i:160); + EVP_DigestFinal_ex (&evp,md,NULL); + EVP_MD_CTX_cleanup (&evp); + + if (memcmp(md,app_b3,sizeof(app_b3))) + { fflush(stdout); + fprintf(stderr,"\nTEST 3 of 3 failed.\n"); + return 1; + } + else + fprintf(stdout,"."); fflush(stdout); + + fprintf(stdout," passed.\n"); fflush(stdout); + + fprintf(stdout,"Testing SHA-224 "); + + EVP_Digest ("abc",3,md,NULL,EVP_sha224(),NULL); + if (memcmp(md,addenum_1,sizeof(addenum_1))) + { fflush(stdout); + fprintf(stderr,"\nTEST 1 of 3 failed.\n"); + return 1; + } + else + fprintf(stdout,"."); fflush(stdout); + + EVP_Digest ("abcdbcde""cdefdefg""efghfghi""ghijhijk" + "ijkljklm""klmnlmno""mnopnopq",56,md,NULL,EVP_sha224(),NULL); + if (memcmp(md,addenum_2,sizeof(addenum_2))) + { fflush(stdout); + fprintf(stderr,"\nTEST 2 of 3 failed.\n"); + return 1; + } + else + fprintf(stdout,"."); fflush(stdout); + + EVP_MD_CTX_init (&evp); + EVP_DigestInit_ex (&evp,EVP_sha224(),NULL); + for (i=0;i<1000000;i+=64) + EVP_DigestUpdate (&evp, "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa", + (1000000-i)<64?1000000-i:64); + EVP_DigestFinal_ex (&evp,md,NULL); + EVP_MD_CTX_cleanup (&evp); + + if (memcmp(md,addenum_3,sizeof(addenum_3))) + { fflush(stdout); + fprintf(stderr,"\nTEST 3 of 3 failed.\n"); + return 1; + } + else + fprintf(stdout,"."); fflush(stdout); + + fprintf(stdout," passed.\n"); fflush(stdout); + + return 0; +} +#endif diff --git a/app/openssl/crypto/sha/sha512.c b/app/openssl/crypto/sha/sha512.c new file mode 100644 index 00000000..cbc0e58c --- /dev/null +++ b/app/openssl/crypto/sha/sha512.c @@ -0,0 +1,641 @@ +/* crypto/sha/sha512.c */ +/* ==================================================================== + * Copyright (c) 2004 The OpenSSL Project. All rights reserved + * according to the OpenSSL license [found in ../../LICENSE]. + * ==================================================================== + */ +#include <openssl/opensslconf.h> +#if !defined(OPENSSL_NO_SHA) && !defined(OPENSSL_NO_SHA512) +/* + * IMPLEMENTATION NOTES. + * + * As you might have noticed 32-bit hash algorithms: + * + * - permit SHA_LONG to be wider than 32-bit (case on CRAY); + * - optimized versions implement two transform functions: one operating + * on [aligned] data in host byte order and one - on data in input + * stream byte order; + * - share common byte-order neutral collector and padding function + * implementations, ../md32_common.h; + * + * Neither of the above applies to this SHA-512 implementations. Reasons + * [in reverse order] are: + * + * - it's the only 64-bit hash algorithm for the moment of this writing, + * there is no need for common collector/padding implementation [yet]; + * - by supporting only one transform function [which operates on + * *aligned* data in input stream byte order, big-endian in this case] + * we minimize burden of maintenance in two ways: a) collector/padding + * function is simpler; b) only one transform function to stare at; + * - SHA_LONG64 is required to be exactly 64-bit in order to be able to + * apply a number of optimizations to mitigate potential performance + * penalties caused by previous design decision; + * + * Caveat lector. + * + * Implementation relies on the fact that "long long" is 64-bit on + * both 32- and 64-bit platforms. If some compiler vendor comes up + * with 128-bit long long, adjustment to sha.h would be required. + * As this implementation relies on 64-bit integer type, it's totally + * inappropriate for platforms which don't support it, most notably + * 16-bit platforms. + * <appro@fy.chalmers.se> + */ +#include <stdlib.h> +#include <string.h> + +#include <openssl/crypto.h> +#include <openssl/sha.h> +#include <openssl/opensslv.h> + +#include "cryptlib.h" + +const char SHA512_version[]="SHA-512" OPENSSL_VERSION_PTEXT; + +#if defined(__i386) || defined(__i386__) || defined(_M_IX86) || \ + defined(__x86_64) || defined(_M_AMD64) || defined(_M_X64) || \ + defined(__s390__) || defined(__s390x__) || \ + defined(SHA512_ASM) +#define SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA +#endif + +int SHA384_Init (SHA512_CTX *c) + { +#if defined(SHA512_ASM) && (defined(__arm__) || defined(__arm)) + /* maintain dword order required by assembler module */ + unsigned int *h = (unsigned int *)c->h; + + h[0] = 0xcbbb9d5d; h[1] = 0xc1059ed8; + h[2] = 0x629a292a; h[3] = 0x367cd507; + h[4] = 0x9159015a; h[5] = 0x3070dd17; + h[6] = 0x152fecd8; h[7] = 0xf70e5939; + h[8] = 0x67332667; h[9] = 0xffc00b31; + h[10] = 0x8eb44a87; h[11] = 0x68581511; + h[12] = 0xdb0c2e0d; h[13] = 0x64f98fa7; + h[14] = 0x47b5481d; h[15] = 0xbefa4fa4; +#else + c->h[0]=U64(0xcbbb9d5dc1059ed8); + c->h[1]=U64(0x629a292a367cd507); + c->h[2]=U64(0x9159015a3070dd17); + c->h[3]=U64(0x152fecd8f70e5939); + c->h[4]=U64(0x67332667ffc00b31); + c->h[5]=U64(0x8eb44a8768581511); + c->h[6]=U64(0xdb0c2e0d64f98fa7); + c->h[7]=U64(0x47b5481dbefa4fa4); +#endif + c->Nl=0; c->Nh=0; + c->num=0; c->md_len=SHA384_DIGEST_LENGTH; + return 1; + } + +int SHA512_Init (SHA512_CTX *c) + { +#if defined(SHA512_ASM) && (defined(__arm__) || defined(__arm)) + /* maintain dword order required by assembler module */ + unsigned int *h = (unsigned int *)c->h; + + h[0] = 0x6a09e667; h[1] = 0xf3bcc908; + h[2] = 0xbb67ae85; h[3] = 0x84caa73b; + h[4] = 0x3c6ef372; h[5] = 0xfe94f82b; + h[6] = 0xa54ff53a; h[7] = 0x5f1d36f1; + h[8] = 0x510e527f; h[9] = 0xade682d1; + h[10] = 0x9b05688c; h[11] = 0x2b3e6c1f; + h[12] = 0x1f83d9ab; h[13] = 0xfb41bd6b; + h[14] = 0x5be0cd19; h[15] = 0x137e2179; +#else + c->h[0]=U64(0x6a09e667f3bcc908); + c->h[1]=U64(0xbb67ae8584caa73b); + c->h[2]=U64(0x3c6ef372fe94f82b); + c->h[3]=U64(0xa54ff53a5f1d36f1); + c->h[4]=U64(0x510e527fade682d1); + c->h[5]=U64(0x9b05688c2b3e6c1f); + c->h[6]=U64(0x1f83d9abfb41bd6b); + c->h[7]=U64(0x5be0cd19137e2179); +#endif + c->Nl=0; c->Nh=0; + c->num=0; c->md_len=SHA512_DIGEST_LENGTH; + return 1; + } + +#ifndef SHA512_ASM +static +#endif +void sha512_block_data_order (SHA512_CTX *ctx, const void *in, size_t num); + +int SHA512_Final (unsigned char *md, SHA512_CTX *c) + { + unsigned char *p=(unsigned char *)c->u.p; + size_t n=c->num; + + p[n]=0x80; /* There always is a room for one */ + n++; + if (n > (sizeof(c->u)-16)) + memset (p+n,0,sizeof(c->u)-n), n=0, + sha512_block_data_order (c,p,1); + + memset (p+n,0,sizeof(c->u)-16-n); +#ifdef B_ENDIAN + c->u.d[SHA_LBLOCK-2] = c->Nh; + c->u.d[SHA_LBLOCK-1] = c->Nl; +#else + p[sizeof(c->u)-1] = (unsigned char)(c->Nl); + p[sizeof(c->u)-2] = (unsigned char)(c->Nl>>8); + p[sizeof(c->u)-3] = (unsigned char)(c->Nl>>16); + p[sizeof(c->u)-4] = (unsigned char)(c->Nl>>24); + p[sizeof(c->u)-5] = (unsigned char)(c->Nl>>32); + p[sizeof(c->u)-6] = (unsigned char)(c->Nl>>40); + p[sizeof(c->u)-7] = (unsigned char)(c->Nl>>48); + p[sizeof(c->u)-8] = (unsigned char)(c->Nl>>56); + p[sizeof(c->u)-9] = (unsigned char)(c->Nh); + p[sizeof(c->u)-10] = (unsigned char)(c->Nh>>8); + p[sizeof(c->u)-11] = (unsigned char)(c->Nh>>16); + p[sizeof(c->u)-12] = (unsigned char)(c->Nh>>24); + p[sizeof(c->u)-13] = (unsigned char)(c->Nh>>32); + p[sizeof(c->u)-14] = (unsigned char)(c->Nh>>40); + p[sizeof(c->u)-15] = (unsigned char)(c->Nh>>48); + p[sizeof(c->u)-16] = (unsigned char)(c->Nh>>56); +#endif + + sha512_block_data_order (c,p,1); + + if (md==0) return 0; + +#if defined(SHA512_ASM) && (defined(__arm__) || defined(__arm)) + /* recall assembler dword order... */ + n = c->md_len; + if (n == SHA384_DIGEST_LENGTH || n == SHA512_DIGEST_LENGTH) + { + unsigned int *h = (unsigned int *)c->h, t; + + for (n/=4;n;n--) + { + t = *(h++); + *(md++) = (unsigned char)(t>>24); + *(md++) = (unsigned char)(t>>16); + *(md++) = (unsigned char)(t>>8); + *(md++) = (unsigned char)(t); + } + } + else return 0; +#else + switch (c->md_len) + { + /* Let compiler decide if it's appropriate to unroll... */ + case SHA384_DIGEST_LENGTH: + for (n=0;n<SHA384_DIGEST_LENGTH/8;n++) + { + SHA_LONG64 t = c->h[n]; + + *(md++) = (unsigned char)(t>>56); + *(md++) = (unsigned char)(t>>48); + *(md++) = (unsigned char)(t>>40); + *(md++) = (unsigned char)(t>>32); + *(md++) = (unsigned char)(t>>24); + *(md++) = (unsigned char)(t>>16); + *(md++) = (unsigned char)(t>>8); + *(md++) = (unsigned char)(t); + } + break; + case SHA512_DIGEST_LENGTH: + for (n=0;n<SHA512_DIGEST_LENGTH/8;n++) + { + SHA_LONG64 t = c->h[n]; + + *(md++) = (unsigned char)(t>>56); + *(md++) = (unsigned char)(t>>48); + *(md++) = (unsigned char)(t>>40); + *(md++) = (unsigned char)(t>>32); + *(md++) = (unsigned char)(t>>24); + *(md++) = (unsigned char)(t>>16); + *(md++) = (unsigned char)(t>>8); + *(md++) = (unsigned char)(t); + } + break; + /* ... as well as make sure md_len is not abused. */ + default: return 0; + } +#endif + return 1; + } + +int SHA384_Final (unsigned char *md,SHA512_CTX *c) +{ return SHA512_Final (md,c); } + +int SHA512_Update (SHA512_CTX *c, const void *_data, size_t len) + { + SHA_LONG64 l; + unsigned char *p=c->u.p; + const unsigned char *data=(const unsigned char *)_data; + + if (len==0) return 1; + + l = (c->Nl+(((SHA_LONG64)len)<<3))&U64(0xffffffffffffffff); + if (l < c->Nl) c->Nh++; + if (sizeof(len)>=8) c->Nh+=(((SHA_LONG64)len)>>61); + c->Nl=l; + + if (c->num != 0) + { + size_t n = sizeof(c->u) - c->num; + + if (len < n) + { + memcpy (p+c->num,data,len), c->num += (unsigned int)len; + return 1; + } + else { + memcpy (p+c->num,data,n), c->num = 0; + len-=n, data+=n; + sha512_block_data_order (c,p,1); + } + } + + if (len >= sizeof(c->u)) + { +#ifndef SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA + if ((size_t)data%sizeof(c->u.d[0]) != 0) + while (len >= sizeof(c->u)) + memcpy (p,data,sizeof(c->u)), + sha512_block_data_order (c,p,1), + len -= sizeof(c->u), + data += sizeof(c->u); + else +#endif + sha512_block_data_order (c,data,len/sizeof(c->u)), + data += len, + len %= sizeof(c->u), + data -= len; + } + + if (len != 0) memcpy (p,data,len), c->num = (int)len; + + return 1; + } + +int SHA384_Update (SHA512_CTX *c, const void *data, size_t len) +{ return SHA512_Update (c,data,len); } + +void SHA512_Transform (SHA512_CTX *c, const unsigned char *data) +{ sha512_block_data_order (c,data,1); } + +unsigned char *SHA384(const unsigned char *d, size_t n, unsigned char *md) + { + SHA512_CTX c; + static unsigned char m[SHA384_DIGEST_LENGTH]; + + if (md == NULL) md=m; + SHA384_Init(&c); + SHA512_Update(&c,d,n); + SHA512_Final(md,&c); + OPENSSL_cleanse(&c,sizeof(c)); + return(md); + } + +unsigned char *SHA512(const unsigned char *d, size_t n, unsigned char *md) + { + SHA512_CTX c; + static unsigned char m[SHA512_DIGEST_LENGTH]; + + if (md == NULL) md=m; + SHA512_Init(&c); + SHA512_Update(&c,d,n); + SHA512_Final(md,&c); + OPENSSL_cleanse(&c,sizeof(c)); + return(md); + } + +#ifndef SHA512_ASM +static const SHA_LONG64 K512[80] = { + U64(0x428a2f98d728ae22),U64(0x7137449123ef65cd), + U64(0xb5c0fbcfec4d3b2f),U64(0xe9b5dba58189dbbc), + U64(0x3956c25bf348b538),U64(0x59f111f1b605d019), + U64(0x923f82a4af194f9b),U64(0xab1c5ed5da6d8118), + U64(0xd807aa98a3030242),U64(0x12835b0145706fbe), + U64(0x243185be4ee4b28c),U64(0x550c7dc3d5ffb4e2), + U64(0x72be5d74f27b896f),U64(0x80deb1fe3b1696b1), + U64(0x9bdc06a725c71235),U64(0xc19bf174cf692694), + U64(0xe49b69c19ef14ad2),U64(0xefbe4786384f25e3), + U64(0x0fc19dc68b8cd5b5),U64(0x240ca1cc77ac9c65), + U64(0x2de92c6f592b0275),U64(0x4a7484aa6ea6e483), + U64(0x5cb0a9dcbd41fbd4),U64(0x76f988da831153b5), + U64(0x983e5152ee66dfab),U64(0xa831c66d2db43210), + U64(0xb00327c898fb213f),U64(0xbf597fc7beef0ee4), + U64(0xc6e00bf33da88fc2),U64(0xd5a79147930aa725), + U64(0x06ca6351e003826f),U64(0x142929670a0e6e70), + U64(0x27b70a8546d22ffc),U64(0x2e1b21385c26c926), + U64(0x4d2c6dfc5ac42aed),U64(0x53380d139d95b3df), + U64(0x650a73548baf63de),U64(0x766a0abb3c77b2a8), + U64(0x81c2c92e47edaee6),U64(0x92722c851482353b), + U64(0xa2bfe8a14cf10364),U64(0xa81a664bbc423001), + U64(0xc24b8b70d0f89791),U64(0xc76c51a30654be30), + U64(0xd192e819d6ef5218),U64(0xd69906245565a910), + U64(0xf40e35855771202a),U64(0x106aa07032bbd1b8), + U64(0x19a4c116b8d2d0c8),U64(0x1e376c085141ab53), + U64(0x2748774cdf8eeb99),U64(0x34b0bcb5e19b48a8), + U64(0x391c0cb3c5c95a63),U64(0x4ed8aa4ae3418acb), + U64(0x5b9cca4f7763e373),U64(0x682e6ff3d6b2b8a3), + U64(0x748f82ee5defb2fc),U64(0x78a5636f43172f60), + U64(0x84c87814a1f0ab72),U64(0x8cc702081a6439ec), + U64(0x90befffa23631e28),U64(0xa4506cebde82bde9), + U64(0xbef9a3f7b2c67915),U64(0xc67178f2e372532b), + U64(0xca273eceea26619c),U64(0xd186b8c721c0c207), + U64(0xeada7dd6cde0eb1e),U64(0xf57d4f7fee6ed178), + U64(0x06f067aa72176fba),U64(0x0a637dc5a2c898a6), + U64(0x113f9804bef90dae),U64(0x1b710b35131c471b), + U64(0x28db77f523047d84),U64(0x32caab7b40c72493), + U64(0x3c9ebe0a15c9bebc),U64(0x431d67c49c100d4c), + U64(0x4cc5d4becb3e42b6),U64(0x597f299cfc657e2a), + U64(0x5fcb6fab3ad6faec),U64(0x6c44198c4a475817) }; + +#ifndef PEDANTIC +# if defined(__GNUC__) && __GNUC__>=2 && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) +# if defined(__x86_64) || defined(__x86_64__) +# define ROTR(a,n) ({ SHA_LONG64 ret; \ + asm ("rorq %1,%0" \ + : "=r"(ret) \ + : "J"(n),"0"(a) \ + : "cc"); ret; }) +# if !defined(B_ENDIAN) +# define PULL64(x) ({ SHA_LONG64 ret=*((const SHA_LONG64 *)(&(x))); \ + asm ("bswapq %0" \ + : "=r"(ret) \ + : "0"(ret)); ret; }) +# endif +# elif (defined(__i386) || defined(__i386__)) && !defined(B_ENDIAN) +# if defined(I386_ONLY) +# define PULL64(x) ({ const unsigned int *p=(const unsigned int *)(&(x));\ + unsigned int hi=p[0],lo=p[1]; \ + asm("xchgb %%ah,%%al;xchgb %%dh,%%dl;"\ + "roll $16,%%eax; roll $16,%%edx; "\ + "xchgb %%ah,%%al;xchgb %%dh,%%dl;" \ + : "=a"(lo),"=d"(hi) \ + : "0"(lo),"1"(hi) : "cc"); \ + ((SHA_LONG64)hi)<<32|lo; }) +# else +# define PULL64(x) ({ const unsigned int *p=(const unsigned int *)(&(x));\ + unsigned int hi=p[0],lo=p[1]; \ + asm ("bswapl %0; bswapl %1;" \ + : "=r"(lo),"=r"(hi) \ + : "0"(lo),"1"(hi)); \ + ((SHA_LONG64)hi)<<32|lo; }) +# endif +# elif (defined(_ARCH_PPC) && defined(__64BIT__)) || defined(_ARCH_PPC64) +# define ROTR(a,n) ({ SHA_LONG64 ret; \ + asm ("rotrdi %0,%1,%2" \ + : "=r"(ret) \ + : "r"(a),"K"(n)); ret; }) +# endif +# elif defined(_MSC_VER) +# if defined(_WIN64) /* applies to both IA-64 and AMD64 */ +# pragma intrinsic(_rotr64) +# define ROTR(a,n) _rotr64((a),n) +# endif +# if defined(_M_IX86) && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) +# if defined(I386_ONLY) + static SHA_LONG64 __fastcall __pull64be(const void *x) + { _asm mov edx, [ecx + 0] + _asm mov eax, [ecx + 4] + _asm xchg dh,dl + _asm xchg ah,al + _asm rol edx,16 + _asm rol eax,16 + _asm xchg dh,dl + _asm xchg ah,al + } +# else + static SHA_LONG64 __fastcall __pull64be(const void *x) + { _asm mov edx, [ecx + 0] + _asm mov eax, [ecx + 4] + _asm bswap edx + _asm bswap eax + } +# endif +# define PULL64(x) __pull64be(&(x)) +# if _MSC_VER<=1200 +# pragma inline_depth(0) +# endif +# endif +# endif +#endif + +#ifndef PULL64 +#define B(x,j) (((SHA_LONG64)(*(((const unsigned char *)(&x))+j)))<<((7-j)*8)) +#define PULL64(x) (B(x,0)|B(x,1)|B(x,2)|B(x,3)|B(x,4)|B(x,5)|B(x,6)|B(x,7)) +#endif + +#ifndef ROTR +#define ROTR(x,s) (((x)>>s) | (x)<<(64-s)) +#endif + +#define Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) +#define Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) +#define sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) +#define sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) + +#define Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z))) +#define Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) + + +#if defined(__i386) || defined(__i386__) || defined(_M_IX86) +/* + * This code should give better results on 32-bit CPU with less than + * ~24 registers, both size and performance wise... + */ +static void sha512_block_data_order (SHA512_CTX *ctx, const void *in, size_t num) + { + const SHA_LONG64 *W=in; + SHA_LONG64 A,E,T; + SHA_LONG64 X[9+80],*F; + int i; + + while (num--) { + + F = X+80; + A = ctx->h[0]; F[1] = ctx->h[1]; + F[2] = ctx->h[2]; F[3] = ctx->h[3]; + E = ctx->h[4]; F[5] = ctx->h[5]; + F[6] = ctx->h[6]; F[7] = ctx->h[7]; + + for (i=0;i<16;i++,F--) + { +#ifdef B_ENDIAN + T = W[i]; +#else + T = PULL64(W[i]); +#endif + F[0] = A; + F[4] = E; + F[8] = T; + T += F[7] + Sigma1(E) + Ch(E,F[5],F[6]) + K512[i]; + E = F[3] + T; + A = T + Sigma0(A) + Maj(A,F[1],F[2]); + } + + for (;i<80;i++,F--) + { + T = sigma0(F[8+16-1]); + T += sigma1(F[8+16-14]); + T += F[8+16] + F[8+16-9]; + + F[0] = A; + F[4] = E; + F[8] = T; + T += F[7] + Sigma1(E) + Ch(E,F[5],F[6]) + K512[i]; + E = F[3] + T; + A = T + Sigma0(A) + Maj(A,F[1],F[2]); + } + + ctx->h[0] += A; ctx->h[1] += F[1]; + ctx->h[2] += F[2]; ctx->h[3] += F[3]; + ctx->h[4] += E; ctx->h[5] += F[5]; + ctx->h[6] += F[6]; ctx->h[7] += F[7]; + + W+=SHA_LBLOCK; + } + } + +#elif defined(OPENSSL_SMALL_FOOTPRINT) + +static void sha512_block_data_order (SHA512_CTX *ctx, const void *in, size_t num) + { + const SHA_LONG64 *W=in; + SHA_LONG64 a,b,c,d,e,f,g,h,s0,s1,T1,T2; + SHA_LONG64 X[16]; + int i; + + while (num--) { + + a = ctx->h[0]; b = ctx->h[1]; c = ctx->h[2]; d = ctx->h[3]; + e = ctx->h[4]; f = ctx->h[5]; g = ctx->h[6]; h = ctx->h[7]; + + for (i=0;i<16;i++) + { +#ifdef B_ENDIAN + T1 = X[i] = W[i]; +#else + T1 = X[i] = PULL64(W[i]); +#endif + T1 += h + Sigma1(e) + Ch(e,f,g) + K512[i]; + T2 = Sigma0(a) + Maj(a,b,c); + h = g; g = f; f = e; e = d + T1; + d = c; c = b; b = a; a = T1 + T2; + } + + for (;i<80;i++) + { + s0 = X[(i+1)&0x0f]; s0 = sigma0(s0); + s1 = X[(i+14)&0x0f]; s1 = sigma1(s1); + + T1 = X[i&0xf] += s0 + s1 + X[(i+9)&0xf]; + T1 += h + Sigma1(e) + Ch(e,f,g) + K512[i]; + T2 = Sigma0(a) + Maj(a,b,c); + h = g; g = f; f = e; e = d + T1; + d = c; c = b; b = a; a = T1 + T2; + } + + ctx->h[0] += a; ctx->h[1] += b; ctx->h[2] += c; ctx->h[3] += d; + ctx->h[4] += e; ctx->h[5] += f; ctx->h[6] += g; ctx->h[7] += h; + + W+=SHA_LBLOCK; + } + } + +#else + +#define ROUND_00_15(i,a,b,c,d,e,f,g,h) do { \ + T1 += h + Sigma1(e) + Ch(e,f,g) + K512[i]; \ + h = Sigma0(a) + Maj(a,b,c); \ + d += T1; h += T1; } while (0) + +#define ROUND_16_80(i,j,a,b,c,d,e,f,g,h,X) do { \ + s0 = X[(j+1)&0x0f]; s0 = sigma0(s0); \ + s1 = X[(j+14)&0x0f]; s1 = sigma1(s1); \ + T1 = X[(j)&0x0f] += s0 + s1 + X[(j+9)&0x0f]; \ + ROUND_00_15(i+j,a,b,c,d,e,f,g,h); } while (0) + +static void sha512_block_data_order (SHA512_CTX *ctx, const void *in, size_t num) + { + const SHA_LONG64 *W=in; + SHA_LONG64 a,b,c,d,e,f,g,h,s0,s1,T1; + SHA_LONG64 X[16]; + int i; + + while (num--) { + + a = ctx->h[0]; b = ctx->h[1]; c = ctx->h[2]; d = ctx->h[3]; + e = ctx->h[4]; f = ctx->h[5]; g = ctx->h[6]; h = ctx->h[7]; + +#ifdef B_ENDIAN + T1 = X[0] = W[0]; ROUND_00_15(0,a,b,c,d,e,f,g,h); + T1 = X[1] = W[1]; ROUND_00_15(1,h,a,b,c,d,e,f,g); + T1 = X[2] = W[2]; ROUND_00_15(2,g,h,a,b,c,d,e,f); + T1 = X[3] = W[3]; ROUND_00_15(3,f,g,h,a,b,c,d,e); + T1 = X[4] = W[4]; ROUND_00_15(4,e,f,g,h,a,b,c,d); + T1 = X[5] = W[5]; ROUND_00_15(5,d,e,f,g,h,a,b,c); + T1 = X[6] = W[6]; ROUND_00_15(6,c,d,e,f,g,h,a,b); + T1 = X[7] = W[7]; ROUND_00_15(7,b,c,d,e,f,g,h,a); + T1 = X[8] = W[8]; ROUND_00_15(8,a,b,c,d,e,f,g,h); + T1 = X[9] = W[9]; ROUND_00_15(9,h,a,b,c,d,e,f,g); + T1 = X[10] = W[10]; ROUND_00_15(10,g,h,a,b,c,d,e,f); + T1 = X[11] = W[11]; ROUND_00_15(11,f,g,h,a,b,c,d,e); + T1 = X[12] = W[12]; ROUND_00_15(12,e,f,g,h,a,b,c,d); + T1 = X[13] = W[13]; ROUND_00_15(13,d,e,f,g,h,a,b,c); + T1 = X[14] = W[14]; ROUND_00_15(14,c,d,e,f,g,h,a,b); + T1 = X[15] = W[15]; ROUND_00_15(15,b,c,d,e,f,g,h,a); +#else + T1 = X[0] = PULL64(W[0]); ROUND_00_15(0,a,b,c,d,e,f,g,h); + T1 = X[1] = PULL64(W[1]); ROUND_00_15(1,h,a,b,c,d,e,f,g); + T1 = X[2] = PULL64(W[2]); ROUND_00_15(2,g,h,a,b,c,d,e,f); + T1 = X[3] = PULL64(W[3]); ROUND_00_15(3,f,g,h,a,b,c,d,e); + T1 = X[4] = PULL64(W[4]); ROUND_00_15(4,e,f,g,h,a,b,c,d); + T1 = X[5] = PULL64(W[5]); ROUND_00_15(5,d,e,f,g,h,a,b,c); + T1 = X[6] = PULL64(W[6]); ROUND_00_15(6,c,d,e,f,g,h,a,b); + T1 = X[7] = PULL64(W[7]); ROUND_00_15(7,b,c,d,e,f,g,h,a); + T1 = X[8] = PULL64(W[8]); ROUND_00_15(8,a,b,c,d,e,f,g,h); + T1 = X[9] = PULL64(W[9]); ROUND_00_15(9,h,a,b,c,d,e,f,g); + T1 = X[10] = PULL64(W[10]); ROUND_00_15(10,g,h,a,b,c,d,e,f); + T1 = X[11] = PULL64(W[11]); ROUND_00_15(11,f,g,h,a,b,c,d,e); + T1 = X[12] = PULL64(W[12]); ROUND_00_15(12,e,f,g,h,a,b,c,d); + T1 = X[13] = PULL64(W[13]); ROUND_00_15(13,d,e,f,g,h,a,b,c); + T1 = X[14] = PULL64(W[14]); ROUND_00_15(14,c,d,e,f,g,h,a,b); + T1 = X[15] = PULL64(W[15]); ROUND_00_15(15,b,c,d,e,f,g,h,a); +#endif + + for (i=16;i<80;i+=16) + { + ROUND_16_80(i, 0,a,b,c,d,e,f,g,h,X); + ROUND_16_80(i, 1,h,a,b,c,d,e,f,g,X); + ROUND_16_80(i, 2,g,h,a,b,c,d,e,f,X); + ROUND_16_80(i, 3,f,g,h,a,b,c,d,e,X); + ROUND_16_80(i, 4,e,f,g,h,a,b,c,d,X); + ROUND_16_80(i, 5,d,e,f,g,h,a,b,c,X); + ROUND_16_80(i, 6,c,d,e,f,g,h,a,b,X); + ROUND_16_80(i, 7,b,c,d,e,f,g,h,a,X); + ROUND_16_80(i, 8,a,b,c,d,e,f,g,h,X); + ROUND_16_80(i, 9,h,a,b,c,d,e,f,g,X); + ROUND_16_80(i,10,g,h,a,b,c,d,e,f,X); + ROUND_16_80(i,11,f,g,h,a,b,c,d,e,X); + ROUND_16_80(i,12,e,f,g,h,a,b,c,d,X); + ROUND_16_80(i,13,d,e,f,g,h,a,b,c,X); + ROUND_16_80(i,14,c,d,e,f,g,h,a,b,X); + ROUND_16_80(i,15,b,c,d,e,f,g,h,a,X); + } + + ctx->h[0] += a; ctx->h[1] += b; ctx->h[2] += c; ctx->h[3] += d; + ctx->h[4] += e; ctx->h[5] += f; ctx->h[6] += g; ctx->h[7] += h; + + W+=SHA_LBLOCK; + } + } + +#endif + +#endif /* SHA512_ASM */ + +#else /* !OPENSSL_NO_SHA512 */ + +#if defined(PEDANTIC) || defined(__DECC) || defined(OPENSSL_SYS_MACOSX) +static void *dummy=&dummy; +#endif + +#endif /* !OPENSSL_NO_SHA512 */ diff --git a/app/openssl/crypto/sha/sha512t.c b/app/openssl/crypto/sha/sha512t.c new file mode 100644 index 00000000..210041d4 --- /dev/null +++ b/app/openssl/crypto/sha/sha512t.c @@ -0,0 +1,184 @@ +/* crypto/sha/sha512t.c */ +/* ==================================================================== + * Copyright (c) 2004 The OpenSSL Project. All rights reserved. + * ==================================================================== + */ +#include <stdio.h> +#include <string.h> +#include <stdlib.h> + +#include <openssl/sha.h> +#include <openssl/evp.h> +#include <openssl/crypto.h> + +#if defined(OPENSSL_NO_SHA) || defined(OPENSSL_NO_SHA512) +int main(int argc, char *argv[]) +{ + printf("No SHA512 support\n"); + return(0); +} +#else + +unsigned char app_c1[SHA512_DIGEST_LENGTH] = { + 0xdd,0xaf,0x35,0xa1,0x93,0x61,0x7a,0xba, + 0xcc,0x41,0x73,0x49,0xae,0x20,0x41,0x31, + 0x12,0xe6,0xfa,0x4e,0x89,0xa9,0x7e,0xa2, + 0x0a,0x9e,0xee,0xe6,0x4b,0x55,0xd3,0x9a, + 0x21,0x92,0x99,0x2a,0x27,0x4f,0xc1,0xa8, + 0x36,0xba,0x3c,0x23,0xa3,0xfe,0xeb,0xbd, + 0x45,0x4d,0x44,0x23,0x64,0x3c,0xe8,0x0e, + 0x2a,0x9a,0xc9,0x4f,0xa5,0x4c,0xa4,0x9f }; + +unsigned char app_c2[SHA512_DIGEST_LENGTH] = { + 0x8e,0x95,0x9b,0x75,0xda,0xe3,0x13,0xda, + 0x8c,0xf4,0xf7,0x28,0x14,0xfc,0x14,0x3f, + 0x8f,0x77,0x79,0xc6,0xeb,0x9f,0x7f,0xa1, + 0x72,0x99,0xae,0xad,0xb6,0x88,0x90,0x18, + 0x50,0x1d,0x28,0x9e,0x49,0x00,0xf7,0xe4, + 0x33,0x1b,0x99,0xde,0xc4,0xb5,0x43,0x3a, + 0xc7,0xd3,0x29,0xee,0xb6,0xdd,0x26,0x54, + 0x5e,0x96,0xe5,0x5b,0x87,0x4b,0xe9,0x09 }; + +unsigned char app_c3[SHA512_DIGEST_LENGTH] = { + 0xe7,0x18,0x48,0x3d,0x0c,0xe7,0x69,0x64, + 0x4e,0x2e,0x42,0xc7,0xbc,0x15,0xb4,0x63, + 0x8e,0x1f,0x98,0xb1,0x3b,0x20,0x44,0x28, + 0x56,0x32,0xa8,0x03,0xaf,0xa9,0x73,0xeb, + 0xde,0x0f,0xf2,0x44,0x87,0x7e,0xa6,0x0a, + 0x4c,0xb0,0x43,0x2c,0xe5,0x77,0xc3,0x1b, + 0xeb,0x00,0x9c,0x5c,0x2c,0x49,0xaa,0x2e, + 0x4e,0xad,0xb2,0x17,0xad,0x8c,0xc0,0x9b }; + +unsigned char app_d1[SHA384_DIGEST_LENGTH] = { + 0xcb,0x00,0x75,0x3f,0x45,0xa3,0x5e,0x8b, + 0xb5,0xa0,0x3d,0x69,0x9a,0xc6,0x50,0x07, + 0x27,0x2c,0x32,0xab,0x0e,0xde,0xd1,0x63, + 0x1a,0x8b,0x60,0x5a,0x43,0xff,0x5b,0xed, + 0x80,0x86,0x07,0x2b,0xa1,0xe7,0xcc,0x23, + 0x58,0xba,0xec,0xa1,0x34,0xc8,0x25,0xa7 }; + +unsigned char app_d2[SHA384_DIGEST_LENGTH] = { + 0x09,0x33,0x0c,0x33,0xf7,0x11,0x47,0xe8, + 0x3d,0x19,0x2f,0xc7,0x82,0xcd,0x1b,0x47, + 0x53,0x11,0x1b,0x17,0x3b,0x3b,0x05,0xd2, + 0x2f,0xa0,0x80,0x86,0xe3,0xb0,0xf7,0x12, + 0xfc,0xc7,0xc7,0x1a,0x55,0x7e,0x2d,0xb9, + 0x66,0xc3,0xe9,0xfa,0x91,0x74,0x60,0x39 }; + +unsigned char app_d3[SHA384_DIGEST_LENGTH] = { + 0x9d,0x0e,0x18,0x09,0x71,0x64,0x74,0xcb, + 0x08,0x6e,0x83,0x4e,0x31,0x0a,0x4a,0x1c, + 0xed,0x14,0x9e,0x9c,0x00,0xf2,0x48,0x52, + 0x79,0x72,0xce,0xc5,0x70,0x4c,0x2a,0x5b, + 0x07,0xb8,0xb3,0xdc,0x38,0xec,0xc4,0xeb, + 0xae,0x97,0xdd,0xd8,0x7f,0x3d,0x89,0x85 }; + +int main (int argc,char **argv) +{ unsigned char md[SHA512_DIGEST_LENGTH]; + int i; + EVP_MD_CTX evp; + +#ifdef OPENSSL_IA32_SSE2 + /* Alternative to this is to call OpenSSL_add_all_algorithms... + * The below code is retained exclusively for debugging purposes. */ + { char *env; + + if ((env=getenv("OPENSSL_ia32cap"))) + OPENSSL_ia32cap = strtoul (env,NULL,0); + } +#endif + + fprintf(stdout,"Testing SHA-512 "); + + EVP_Digest ("abc",3,md,NULL,EVP_sha512(),NULL); + if (memcmp(md,app_c1,sizeof(app_c1))) + { fflush(stdout); + fprintf(stderr,"\nTEST 1 of 3 failed.\n"); + return 1; + } + else + fprintf(stdout,"."); fflush(stdout); + + EVP_Digest ("abcdefgh""bcdefghi""cdefghij""defghijk" + "efghijkl""fghijklm""ghijklmn""hijklmno" + "ijklmnop""jklmnopq""klmnopqr""lmnopqrs" + "mnopqrst""nopqrstu",112,md,NULL,EVP_sha512(),NULL); + if (memcmp(md,app_c2,sizeof(app_c2))) + { fflush(stdout); + fprintf(stderr,"\nTEST 2 of 3 failed.\n"); + return 1; + } + else + fprintf(stdout,"."); fflush(stdout); + + EVP_MD_CTX_init (&evp); + EVP_DigestInit_ex (&evp,EVP_sha512(),NULL); + for (i=0;i<1000000;i+=288) + EVP_DigestUpdate (&evp, "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa", + (1000000-i)<288?1000000-i:288); + EVP_DigestFinal_ex (&evp,md,NULL); + EVP_MD_CTX_cleanup (&evp); + + if (memcmp(md,app_c3,sizeof(app_c3))) + { fflush(stdout); + fprintf(stderr,"\nTEST 3 of 3 failed.\n"); + return 1; + } + else + fprintf(stdout,"."); fflush(stdout); + + fprintf(stdout," passed.\n"); fflush(stdout); + + fprintf(stdout,"Testing SHA-384 "); + + EVP_Digest ("abc",3,md,NULL,EVP_sha384(),NULL); + if (memcmp(md,app_d1,sizeof(app_d1))) + { fflush(stdout); + fprintf(stderr,"\nTEST 1 of 3 failed.\n"); + return 1; + } + else + fprintf(stdout,"."); fflush(stdout); + + EVP_Digest ("abcdefgh""bcdefghi""cdefghij""defghijk" + "efghijkl""fghijklm""ghijklmn""hijklmno" + "ijklmnop""jklmnopq""klmnopqr""lmnopqrs" + "mnopqrst""nopqrstu",112,md,NULL,EVP_sha384(),NULL); + if (memcmp(md,app_d2,sizeof(app_d2))) + { fflush(stdout); + fprintf(stderr,"\nTEST 2 of 3 failed.\n"); + return 1; + } + else + fprintf(stdout,"."); fflush(stdout); + + EVP_MD_CTX_init (&evp); + EVP_DigestInit_ex (&evp,EVP_sha384(),NULL); + for (i=0;i<1000000;i+=64) + EVP_DigestUpdate (&evp, "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" + "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa", + (1000000-i)<64?1000000-i:64); + EVP_DigestFinal_ex (&evp,md,NULL); + EVP_MD_CTX_cleanup (&evp); + + if (memcmp(md,app_d3,sizeof(app_d3))) + { fflush(stdout); + fprintf(stderr,"\nTEST 3 of 3 failed.\n"); + return 1; + } + else + fprintf(stdout,"."); fflush(stdout); + + fprintf(stdout," passed.\n"); fflush(stdout); + + return 0; +} +#endif diff --git a/app/openssl/crypto/sha/sha_dgst.c b/app/openssl/crypto/sha/sha_dgst.c new file mode 100644 index 00000000..70eb5603 --- /dev/null +++ b/app/openssl/crypto/sha/sha_dgst.c @@ -0,0 +1,74 @@ +/* crypto/sha/sha1dgst.c */ +/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) + * All rights reserved. + * + * This package is an SSL implementation written + * by Eric Young (eay@cryptsoft.com). + * The implementation was written so as to conform with Netscapes SSL. + * + * This library is free for commercial and non-commercial use as long as + * the following conditions are aheared to. The following conditions + * apply to all code found in this distribution, be it the RC4, RSA, + * lhash, DES, etc., code; not just the SSL code. The SSL documentation + * included with this distribution is covered by the same copyright terms + * except that the holder is Tim Hudson (tjh@cryptsoft.com). + * + * Copyright remains Eric Young's, and as such any Copyright notices in + * the code are not to be removed. + * If this package is used in a product, Eric Young should be given attribution + * as the author of the parts of the library used. + * This can be in the form of a textual message at program startup or + * in documentation (online or textual) provided with the package. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * "This product includes cryptographic software written by + * Eric Young (eay@cryptsoft.com)" + * The word 'cryptographic' can be left out if the rouines from the library + * being used are not cryptographic related :-). + * 4. If you include any Windows specific code (or a derivative thereof) from + * the apps directory (application code) you must include an acknowledgement: + * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" + * + * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * The licence and distribution terms for any publically available version or + * derivative of this code cannot be changed. i.e. this code cannot simply be + * copied and put under another distribution licence + * [including the GNU Public Licence.] + */ + +#include <openssl/opensslconf.h> +#if !defined(OPENSSL_NO_SHA0) && !defined(OPENSSL_NO_SHA) + +#undef SHA_1 +#define SHA_0 + +#include <openssl/opensslv.h> + +const char SHA_version[]="SHA" OPENSSL_VERSION_PTEXT; + +/* The implementation is in ../md32_common.h */ + +#include "sha_locl.h" + +#endif + diff --git a/app/openssl/crypto/sha/sha_locl.h b/app/openssl/crypto/sha/sha_locl.h new file mode 100644 index 00000000..672c26ee --- /dev/null +++ b/app/openssl/crypto/sha/sha_locl.h @@ -0,0 +1,437 @@ +/* crypto/sha/sha_locl.h */ +/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) + * All rights reserved. + * + * This package is an SSL implementation written + * by Eric Young (eay@cryptsoft.com). + * The implementation was written so as to conform with Netscapes SSL. + * + * This library is free for commercial and non-commercial use as long as + * the following conditions are aheared to. The following conditions + * apply to all code found in this distribution, be it the RC4, RSA, + * lhash, DES, etc., code; not just the SSL code. The SSL documentation + * included with this distribution is covered by the same copyright terms + * except that the holder is Tim Hudson (tjh@cryptsoft.com). + * + * Copyright remains Eric Young's, and as such any Copyright notices in + * the code are not to be removed. + * If this package is used in a product, Eric Young should be given attribution + * as the author of the parts of the library used. + * This can be in the form of a textual message at program startup or + * in documentation (online or textual) provided with the package. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * "This product includes cryptographic software written by + * Eric Young (eay@cryptsoft.com)" + * The word 'cryptographic' can be left out if the rouines from the library + * being used are not cryptographic related :-). + * 4. If you include any Windows specific code (or a derivative thereof) from + * the apps directory (application code) you must include an acknowledgement: + * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" + * + * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * The licence and distribution terms for any publically available version or + * derivative of this code cannot be changed. i.e. this code cannot simply be + * copied and put under another distribution licence + * [including the GNU Public Licence.] + */ + +#include <stdlib.h> +#include <string.h> + +#include <openssl/opensslconf.h> +#include <openssl/sha.h> + +#define DATA_ORDER_IS_BIG_ENDIAN + +#define HASH_LONG SHA_LONG +#define HASH_CTX SHA_CTX +#define HASH_CBLOCK SHA_CBLOCK +#define HASH_MAKE_STRING(c,s) do { \ + unsigned long ll; \ + ll=(c)->h0; HOST_l2c(ll,(s)); \ + ll=(c)->h1; HOST_l2c(ll,(s)); \ + ll=(c)->h2; HOST_l2c(ll,(s)); \ + ll=(c)->h3; HOST_l2c(ll,(s)); \ + ll=(c)->h4; HOST_l2c(ll,(s)); \ + } while (0) + +#if defined(SHA_0) + +# define HASH_UPDATE SHA_Update +# define HASH_TRANSFORM SHA_Transform +# define HASH_FINAL SHA_Final +# define HASH_INIT SHA_Init +# define HASH_BLOCK_DATA_ORDER sha_block_data_order +# define Xupdate(a,ix,ia,ib,ic,id) (ix=(a)=(ia^ib^ic^id)) + +static void sha_block_data_order (SHA_CTX *c, const void *p,size_t num); + +#elif defined(SHA_1) + +# define HASH_UPDATE SHA1_Update +# define HASH_TRANSFORM SHA1_Transform +# define HASH_FINAL SHA1_Final +# define HASH_INIT SHA1_Init +# define HASH_BLOCK_DATA_ORDER sha1_block_data_order +# if defined(__MWERKS__) && defined(__MC68K__) + /* Metrowerks for Motorola fails otherwise:-( <appro@fy.chalmers.se> */ +# define Xupdate(a,ix,ia,ib,ic,id) do { (a)=(ia^ib^ic^id); \ + ix=(a)=ROTATE((a),1); \ + } while (0) +# else +# define Xupdate(a,ix,ia,ib,ic,id) ( (a)=(ia^ib^ic^id), \ + ix=(a)=ROTATE((a),1) \ + ) +# endif + +#ifndef SHA1_ASM +static +#endif +void sha1_block_data_order (SHA_CTX *c, const void *p,size_t num); + +#else +# error "Either SHA_0 or SHA_1 must be defined." +#endif + +#include "md32_common.h" + +#define INIT_DATA_h0 0x67452301UL +#define INIT_DATA_h1 0xefcdab89UL +#define INIT_DATA_h2 0x98badcfeUL +#define INIT_DATA_h3 0x10325476UL +#define INIT_DATA_h4 0xc3d2e1f0UL + +int HASH_INIT (SHA_CTX *c) + { + memset (c,0,sizeof(*c)); + c->h0=INIT_DATA_h0; + c->h1=INIT_DATA_h1; + c->h2=INIT_DATA_h2; + c->h3=INIT_DATA_h3; + c->h4=INIT_DATA_h4; + return 1; + } + +#define K_00_19 0x5a827999UL +#define K_20_39 0x6ed9eba1UL +#define K_40_59 0x8f1bbcdcUL +#define K_60_79 0xca62c1d6UL + +/* As pointed out by Wei Dai <weidai@eskimo.com>, F() below can be + * simplified to the code in F_00_19. Wei attributes these optimisations + * to Peter Gutmann's SHS code, and he attributes it to Rich Schroeppel. + * #define F(x,y,z) (((x) & (y)) | ((~(x)) & (z))) + * I've just become aware of another tweak to be made, again from Wei Dai, + * in F_40_59, (x&a)|(y&a) -> (x|y)&a + */ +#define F_00_19(b,c,d) ((((c) ^ (d)) & (b)) ^ (d)) +#define F_20_39(b,c,d) ((b) ^ (c) ^ (d)) +#define F_40_59(b,c,d) (((b) & (c)) | (((b)|(c)) & (d))) +#define F_60_79(b,c,d) F_20_39(b,c,d) + +#ifndef OPENSSL_SMALL_FOOTPRINT + +#define BODY_00_15(i,a,b,c,d,e,f,xi) \ + (f)=xi+(e)+K_00_19+ROTATE((a),5)+F_00_19((b),(c),(d)); \ + (b)=ROTATE((b),30); + +#define BODY_16_19(i,a,b,c,d,e,f,xi,xa,xb,xc,xd) \ + Xupdate(f,xi,xa,xb,xc,xd); \ + (f)+=(e)+K_00_19+ROTATE((a),5)+F_00_19((b),(c),(d)); \ + (b)=ROTATE((b),30); + +#define BODY_20_31(i,a,b,c,d,e,f,xi,xa,xb,xc,xd) \ + Xupdate(f,xi,xa,xb,xc,xd); \ + (f)+=(e)+K_20_39+ROTATE((a),5)+F_20_39((b),(c),(d)); \ + (b)=ROTATE((b),30); + +#define BODY_32_39(i,a,b,c,d,e,f,xa,xb,xc,xd) \ + Xupdate(f,xa,xa,xb,xc,xd); \ + (f)+=(e)+K_20_39+ROTATE((a),5)+F_20_39((b),(c),(d)); \ + (b)=ROTATE((b),30); + +#define BODY_40_59(i,a,b,c,d,e,f,xa,xb,xc,xd) \ + Xupdate(f,xa,xa,xb,xc,xd); \ + (f)+=(e)+K_40_59+ROTATE((a),5)+F_40_59((b),(c),(d)); \ + (b)=ROTATE((b),30); + +#define BODY_60_79(i,a,b,c,d,e,f,xa,xb,xc,xd) \ + Xupdate(f,xa,xa,xb,xc,xd); \ + (f)=xa+(e)+K_60_79+ROTATE((a),5)+F_60_79((b),(c),(d)); \ + (b)=ROTATE((b),30); + +#ifdef X +#undef X +#endif +#ifndef MD32_XARRAY + /* + * Originally X was an array. As it's automatic it's natural + * to expect RISC compiler to accomodate at least part of it in + * the register bank, isn't it? Unfortunately not all compilers + * "find" this expectation reasonable:-( On order to make such + * compilers generate better code I replace X[] with a bunch of + * X0, X1, etc. See the function body below... + * <appro@fy.chalmers.se> + */ +# define X(i) XX##i +#else + /* + * However! Some compilers (most notably HP C) get overwhelmed by + * that many local variables so that we have to have the way to + * fall down to the original behavior. + */ +# define X(i) XX[i] +#endif + +#if !defined(SHA_1) || !defined(SHA1_ASM) +static void HASH_BLOCK_DATA_ORDER (SHA_CTX *c, const void *p, size_t num) + { + const unsigned char *data=p; + register unsigned MD32_REG_T A,B,C,D,E,T,l; +#ifndef MD32_XARRAY + unsigned MD32_REG_T XX0, XX1, XX2, XX3, XX4, XX5, XX6, XX7, + XX8, XX9,XX10,XX11,XX12,XX13,XX14,XX15; +#else + SHA_LONG XX[16]; +#endif + + A=c->h0; + B=c->h1; + C=c->h2; + D=c->h3; + E=c->h4; + + for (;;) + { + const union { long one; char little; } is_endian = {1}; + + if (!is_endian.little && sizeof(SHA_LONG)==4 && ((size_t)p%4)==0) + { + const SHA_LONG *W=(const SHA_LONG *)data; + + X( 0) = W[0]; X( 1) = W[ 1]; + BODY_00_15( 0,A,B,C,D,E,T,X( 0)); X( 2) = W[ 2]; + BODY_00_15( 1,T,A,B,C,D,E,X( 1)); X( 3) = W[ 3]; + BODY_00_15( 2,E,T,A,B,C,D,X( 2)); X( 4) = W[ 4]; + BODY_00_15( 3,D,E,T,A,B,C,X( 3)); X( 5) = W[ 5]; + BODY_00_15( 4,C,D,E,T,A,B,X( 4)); X( 6) = W[ 6]; + BODY_00_15( 5,B,C,D,E,T,A,X( 5)); X( 7) = W[ 7]; + BODY_00_15( 6,A,B,C,D,E,T,X( 6)); X( 8) = W[ 8]; + BODY_00_15( 7,T,A,B,C,D,E,X( 7)); X( 9) = W[ 9]; + BODY_00_15( 8,E,T,A,B,C,D,X( 8)); X(10) = W[10]; + BODY_00_15( 9,D,E,T,A,B,C,X( 9)); X(11) = W[11]; + BODY_00_15(10,C,D,E,T,A,B,X(10)); X(12) = W[12]; + BODY_00_15(11,B,C,D,E,T,A,X(11)); X(13) = W[13]; + BODY_00_15(12,A,B,C,D,E,T,X(12)); X(14) = W[14]; + BODY_00_15(13,T,A,B,C,D,E,X(13)); X(15) = W[15]; + BODY_00_15(14,E,T,A,B,C,D,X(14)); + BODY_00_15(15,D,E,T,A,B,C,X(15)); + + data += SHA_CBLOCK; + } + else + { + HOST_c2l(data,l); X( 0)=l; HOST_c2l(data,l); X( 1)=l; + BODY_00_15( 0,A,B,C,D,E,T,X( 0)); HOST_c2l(data,l); X( 2)=l; + BODY_00_15( 1,T,A,B,C,D,E,X( 1)); HOST_c2l(data,l); X( 3)=l; + BODY_00_15( 2,E,T,A,B,C,D,X( 2)); HOST_c2l(data,l); X( 4)=l; + BODY_00_15( 3,D,E,T,A,B,C,X( 3)); HOST_c2l(data,l); X( 5)=l; + BODY_00_15( 4,C,D,E,T,A,B,X( 4)); HOST_c2l(data,l); X( 6)=l; + BODY_00_15( 5,B,C,D,E,T,A,X( 5)); HOST_c2l(data,l); X( 7)=l; + BODY_00_15( 6,A,B,C,D,E,T,X( 6)); HOST_c2l(data,l); X( 8)=l; + BODY_00_15( 7,T,A,B,C,D,E,X( 7)); HOST_c2l(data,l); X( 9)=l; + BODY_00_15( 8,E,T,A,B,C,D,X( 8)); HOST_c2l(data,l); X(10)=l; + BODY_00_15( 9,D,E,T,A,B,C,X( 9)); HOST_c2l(data,l); X(11)=l; + BODY_00_15(10,C,D,E,T,A,B,X(10)); HOST_c2l(data,l); X(12)=l; + BODY_00_15(11,B,C,D,E,T,A,X(11)); HOST_c2l(data,l); X(13)=l; + BODY_00_15(12,A,B,C,D,E,T,X(12)); HOST_c2l(data,l); X(14)=l; + BODY_00_15(13,T,A,B,C,D,E,X(13)); HOST_c2l(data,l); X(15)=l; + BODY_00_15(14,E,T,A,B,C,D,X(14)); + BODY_00_15(15,D,E,T,A,B,C,X(15)); + } + + BODY_16_19(16,C,D,E,T,A,B,X( 0),X( 0),X( 2),X( 8),X(13)); + BODY_16_19(17,B,C,D,E,T,A,X( 1),X( 1),X( 3),X( 9),X(14)); + BODY_16_19(18,A,B,C,D,E,T,X( 2),X( 2),X( 4),X(10),X(15)); + BODY_16_19(19,T,A,B,C,D,E,X( 3),X( 3),X( 5),X(11),X( 0)); + + BODY_20_31(20,E,T,A,B,C,D,X( 4),X( 4),X( 6),X(12),X( 1)); + BODY_20_31(21,D,E,T,A,B,C,X( 5),X( 5),X( 7),X(13),X( 2)); + BODY_20_31(22,C,D,E,T,A,B,X( 6),X( 6),X( 8),X(14),X( 3)); + BODY_20_31(23,B,C,D,E,T,A,X( 7),X( 7),X( 9),X(15),X( 4)); + BODY_20_31(24,A,B,C,D,E,T,X( 8),X( 8),X(10),X( 0),X( 5)); + BODY_20_31(25,T,A,B,C,D,E,X( 9),X( 9),X(11),X( 1),X( 6)); + BODY_20_31(26,E,T,A,B,C,D,X(10),X(10),X(12),X( 2),X( 7)); + BODY_20_31(27,D,E,T,A,B,C,X(11),X(11),X(13),X( 3),X( 8)); + BODY_20_31(28,C,D,E,T,A,B,X(12),X(12),X(14),X( 4),X( 9)); + BODY_20_31(29,B,C,D,E,T,A,X(13),X(13),X(15),X( 5),X(10)); + BODY_20_31(30,A,B,C,D,E,T,X(14),X(14),X( 0),X( 6),X(11)); + BODY_20_31(31,T,A,B,C,D,E,X(15),X(15),X( 1),X( 7),X(12)); + + BODY_32_39(32,E,T,A,B,C,D,X( 0),X( 2),X( 8),X(13)); + BODY_32_39(33,D,E,T,A,B,C,X( 1),X( 3),X( 9),X(14)); + BODY_32_39(34,C,D,E,T,A,B,X( 2),X( 4),X(10),X(15)); + BODY_32_39(35,B,C,D,E,T,A,X( 3),X( 5),X(11),X( 0)); + BODY_32_39(36,A,B,C,D,E,T,X( 4),X( 6),X(12),X( 1)); + BODY_32_39(37,T,A,B,C,D,E,X( 5),X( 7),X(13),X( 2)); + BODY_32_39(38,E,T,A,B,C,D,X( 6),X( 8),X(14),X( 3)); + BODY_32_39(39,D,E,T,A,B,C,X( 7),X( 9),X(15),X( 4)); + + BODY_40_59(40,C,D,E,T,A,B,X( 8),X(10),X( 0),X( 5)); + BODY_40_59(41,B,C,D,E,T,A,X( 9),X(11),X( 1),X( 6)); + BODY_40_59(42,A,B,C,D,E,T,X(10),X(12),X( 2),X( 7)); + BODY_40_59(43,T,A,B,C,D,E,X(11),X(13),X( 3),X( 8)); + BODY_40_59(44,E,T,A,B,C,D,X(12),X(14),X( 4),X( 9)); + BODY_40_59(45,D,E,T,A,B,C,X(13),X(15),X( 5),X(10)); + BODY_40_59(46,C,D,E,T,A,B,X(14),X( 0),X( 6),X(11)); + BODY_40_59(47,B,C,D,E,T,A,X(15),X( 1),X( 7),X(12)); + BODY_40_59(48,A,B,C,D,E,T,X( 0),X( 2),X( 8),X(13)); + BODY_40_59(49,T,A,B,C,D,E,X( 1),X( 3),X( 9),X(14)); + BODY_40_59(50,E,T,A,B,C,D,X( 2),X( 4),X(10),X(15)); + BODY_40_59(51,D,E,T,A,B,C,X( 3),X( 5),X(11),X( 0)); + BODY_40_59(52,C,D,E,T,A,B,X( 4),X( 6),X(12),X( 1)); + BODY_40_59(53,B,C,D,E,T,A,X( 5),X( 7),X(13),X( 2)); + BODY_40_59(54,A,B,C,D,E,T,X( 6),X( 8),X(14),X( 3)); + BODY_40_59(55,T,A,B,C,D,E,X( 7),X( 9),X(15),X( 4)); + BODY_40_59(56,E,T,A,B,C,D,X( 8),X(10),X( 0),X( 5)); + BODY_40_59(57,D,E,T,A,B,C,X( 9),X(11),X( 1),X( 6)); + BODY_40_59(58,C,D,E,T,A,B,X(10),X(12),X( 2),X( 7)); + BODY_40_59(59,B,C,D,E,T,A,X(11),X(13),X( 3),X( 8)); + + BODY_60_79(60,A,B,C,D,E,T,X(12),X(14),X( 4),X( 9)); + BODY_60_79(61,T,A,B,C,D,E,X(13),X(15),X( 5),X(10)); + BODY_60_79(62,E,T,A,B,C,D,X(14),X( 0),X( 6),X(11)); + BODY_60_79(63,D,E,T,A,B,C,X(15),X( 1),X( 7),X(12)); + BODY_60_79(64,C,D,E,T,A,B,X( 0),X( 2),X( 8),X(13)); + BODY_60_79(65,B,C,D,E,T,A,X( 1),X( 3),X( 9),X(14)); + BODY_60_79(66,A,B,C,D,E,T,X( 2),X( 4),X(10),X(15)); + BODY_60_79(67,T,A,B,C,D,E,X( 3),X( 5),X(11),X( 0)); + BODY_60_79(68,E,T,A,B,C,D,X( 4),X( 6),X(12),X( 1)); + BODY_60_79(69,D,E,T,A,B,C,X( 5),X( 7),X(13),X( 2)); + BODY_60_79(70,C,D,E,T,A,B,X( 6),X( 8),X(14),X( 3)); + BODY_60_79(71,B,C,D,E,T,A,X( 7),X( 9),X(15),X( 4)); + BODY_60_79(72,A,B,C,D,E,T,X( 8),X(10),X( 0),X( 5)); + BODY_60_79(73,T,A,B,C,D,E,X( 9),X(11),X( 1),X( 6)); + BODY_60_79(74,E,T,A,B,C,D,X(10),X(12),X( 2),X( 7)); + BODY_60_79(75,D,E,T,A,B,C,X(11),X(13),X( 3),X( 8)); + BODY_60_79(76,C,D,E,T,A,B,X(12),X(14),X( 4),X( 9)); + BODY_60_79(77,B,C,D,E,T,A,X(13),X(15),X( 5),X(10)); + BODY_60_79(78,A,B,C,D,E,T,X(14),X( 0),X( 6),X(11)); + BODY_60_79(79,T,A,B,C,D,E,X(15),X( 1),X( 7),X(12)); + + c->h0=(c->h0+E)&0xffffffffL; + c->h1=(c->h1+T)&0xffffffffL; + c->h2=(c->h2+A)&0xffffffffL; + c->h3=(c->h3+B)&0xffffffffL; + c->h4=(c->h4+C)&0xffffffffL; + + if (--num == 0) break; + + A=c->h0; + B=c->h1; + C=c->h2; + D=c->h3; + E=c->h4; + + } + } +#endif + +#else /* OPENSSL_SMALL_FOOTPRINT */ + +#define BODY_00_15(xi) do { \ + T=E+K_00_19+F_00_19(B,C,D); \ + E=D, D=C, C=ROTATE(B,30), B=A; \ + A=ROTATE(A,5)+T+xi; } while(0) + +#define BODY_16_19(xa,xb,xc,xd) do { \ + Xupdate(T,xa,xa,xb,xc,xd); \ + T+=E+K_00_19+F_00_19(B,C,D); \ + E=D, D=C, C=ROTATE(B,30), B=A; \ + A=ROTATE(A,5)+T; } while(0) + +#define BODY_20_39(xa,xb,xc,xd) do { \ + Xupdate(T,xa,xa,xb,xc,xd); \ + T+=E+K_20_39+F_20_39(B,C,D); \ + E=D, D=C, C=ROTATE(B,30), B=A; \ + A=ROTATE(A,5)+T; } while(0) + +#define BODY_40_59(xa,xb,xc,xd) do { \ + Xupdate(T,xa,xa,xb,xc,xd); \ + T+=E+K_40_59+F_40_59(B,C,D); \ + E=D, D=C, C=ROTATE(B,30), B=A; \ + A=ROTATE(A,5)+T; } while(0) + +#define BODY_60_79(xa,xb,xc,xd) do { \ + Xupdate(T,xa,xa,xb,xc,xd); \ + T=E+K_60_79+F_60_79(B,C,D); \ + E=D, D=C, C=ROTATE(B,30), B=A; \ + A=ROTATE(A,5)+T+xa; } while(0) + +#if !defined(SHA_1) || !defined(SHA1_ASM) +static void HASH_BLOCK_DATA_ORDER (SHA_CTX *c, const void *p, size_t num) + { + const unsigned char *data=p; + register unsigned MD32_REG_T A,B,C,D,E,T,l; + int i; + SHA_LONG X[16]; + + A=c->h0; + B=c->h1; + C=c->h2; + D=c->h3; + E=c->h4; + + for (;;) + { + for (i=0;i<16;i++) + { HOST_c2l(data,l); X[i]=l; BODY_00_15(X[i]); } + for (i=0;i<4;i++) + { BODY_16_19(X[i], X[i+2], X[i+8], X[(i+13)&15]); } + for (;i<24;i++) + { BODY_20_39(X[i&15], X[(i+2)&15], X[(i+8)&15],X[(i+13)&15]); } + for (i=0;i<20;i++) + { BODY_40_59(X[(i+8)&15],X[(i+10)&15],X[i&15], X[(i+5)&15]); } + for (i=4;i<24;i++) + { BODY_60_79(X[(i+8)&15],X[(i+10)&15],X[i&15], X[(i+5)&15]); } + + c->h0=(c->h0+A)&0xffffffffL; + c->h1=(c->h1+B)&0xffffffffL; + c->h2=(c->h2+C)&0xffffffffL; + c->h3=(c->h3+D)&0xffffffffL; + c->h4=(c->h4+E)&0xffffffffL; + + if (--num == 0) break; + + A=c->h0; + B=c->h1; + C=c->h2; + D=c->h3; + E=c->h4; + + } + } +#endif + +#endif diff --git a/app/openssl/crypto/sha/shatest.c b/app/openssl/crypto/sha/shatest.c new file mode 100644 index 00000000..27614646 --- /dev/null +++ b/app/openssl/crypto/sha/shatest.c @@ -0,0 +1,178 @@ +/* crypto/sha/shatest.c */ +/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) + * All rights reserved. + * + * This package is an SSL implementation written + * by Eric Young (eay@cryptsoft.com). + * The implementation was written so as to conform with Netscapes SSL. + * + * This library is free for commercial and non-commercial use as long as + * the following conditions are aheared to. The following conditions + * apply to all code found in this distribution, be it the RC4, RSA, + * lhash, DES, etc., code; not just the SSL code. The SSL documentation + * included with this distribution is covered by the same copyright terms + * except that the holder is Tim Hudson (tjh@cryptsoft.com). + * + * Copyright remains Eric Young's, and as such any Copyright notices in + * the code are not to be removed. + * If this package is used in a product, Eric Young should be given attribution + * as the author of the parts of the library used. + * This can be in the form of a textual message at program startup or + * in documentation (online or textual) provided with the package. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * "This product includes cryptographic software written by + * Eric Young (eay@cryptsoft.com)" + * The word 'cryptographic' can be left out if the rouines from the library + * being used are not cryptographic related :-). + * 4. If you include any Windows specific code (or a derivative thereof) from + * the apps directory (application code) you must include an acknowledgement: + * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" + * + * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * The licence and distribution terms for any publically available version or + * derivative of this code cannot be changed. i.e. this code cannot simply be + * copied and put under another distribution licence + * [including the GNU Public Licence.] + */ + +#include <stdio.h> +#include <string.h> +#include <stdlib.h> + +#include "../e_os.h" + +#if defined(OPENSSL_NO_SHA) || defined(OPENSSL_NO_SHA0) +int main(int argc, char *argv[]) +{ + printf("No SHA0 support\n"); + return(0); +} +#else +#include <openssl/evp.h> +#include <openssl/sha.h> + +#ifdef CHARSET_EBCDIC +#include <openssl/ebcdic.h> +#endif + +#define SHA_0 /* FIPS 180 */ +#undef SHA_1 /* FIPS 180-1 */ + +static char *test[]={ + "abc", + "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq", + NULL, + }; + +#ifdef SHA_0 +static char *ret[]={ + "0164b8a914cd2a5e74c4f7ff082c4d97f1edf880", + "d2516ee1acfa5baf33dfc1c471e438449ef134c8", + }; +static char *bigret= + "3232affa48628a26653b5aaa44541fd90d690603"; +#endif +#ifdef SHA_1 +static char *ret[]={ + "a9993e364706816aba3e25717850c26c9cd0d89d", + "84983e441c3bd26ebaae4aa1f95129e5e54670f1", + }; +static char *bigret= + "34aa973cd4c4daa4f61eeb2bdbad27316534016f"; +#endif + +static char *pt(unsigned char *md); +int main(int argc, char *argv[]) + { + int i,err=0; + char **P,**R; + static unsigned char buf[1000]; + char *p,*r; + EVP_MD_CTX c; + unsigned char md[SHA_DIGEST_LENGTH]; + +#ifdef CHARSET_EBCDIC + ebcdic2ascii(test[0], test[0], strlen(test[0])); + ebcdic2ascii(test[1], test[1], strlen(test[1])); +#endif + + EVP_MD_CTX_init(&c); + P=test; + R=ret; + i=1; + while (*P != NULL) + { + EVP_Digest(*P,strlen(*P),md,NULL,EVP_sha(), NULL); + p=pt(md); + if (strcmp(p,*R) != 0) + { + printf("error calculating SHA on '%s'\n",*P); + printf("got %s instead of %s\n",p,*R); + err++; + } + else + printf("test %d ok\n",i); + i++; + R++; + P++; + } + + memset(buf,'a',1000); +#ifdef CHARSET_EBCDIC + ebcdic2ascii(buf, buf, 1000); +#endif /*CHARSET_EBCDIC*/ + EVP_DigestInit_ex(&c,EVP_sha(), NULL); + for (i=0; i<1000; i++) + EVP_DigestUpdate(&c,buf,1000); + EVP_DigestFinal_ex(&c,md,NULL); + p=pt(md); + + r=bigret; + if (strcmp(p,r) != 0) + { + printf("error calculating SHA on '%s'\n",p); + printf("got %s instead of %s\n",p,r); + err++; + } + else + printf("test 3 ok\n"); + +#ifdef OPENSSL_SYS_NETWARE + if (err) printf("ERROR: %d\n", err); +#endif + EVP_MD_CTX_cleanup(&c); + EXIT(err); + return(0); + } + +static char *pt(unsigned char *md) + { + int i; + static char buf[80]; + + for (i=0; i<SHA_DIGEST_LENGTH; i++) + sprintf(&(buf[i*2]),"%02x",md[i]); + return(buf); + } +#endif |