diff options
Diffstat (limited to 'app/openssl/crypto/sha')
35 files changed, 0 insertions, 11399 deletions
diff --git a/app/openssl/crypto/sha/asm/README b/app/openssl/crypto/sha/asm/README deleted file mode 100644 index b7e75576..00000000 --- a/app/openssl/crypto/sha/asm/README +++ /dev/null @@ -1 +0,0 @@ -C2.pl works diff --git a/app/openssl/crypto/sha/asm/sha1-586.pl b/app/openssl/crypto/sha/asm/sha1-586.pl deleted file mode 100644 index a1f87628..00000000 --- a/app/openssl/crypto/sha/asm/sha1-586.pl +++ /dev/null @@ -1,220 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# [Re]written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# "[Re]written" was achieved in two major overhauls. In 2004 BODY_* -# functions were re-implemented to address P4 performance issue [see -# commentary below], and in 2006 the rest was rewritten in order to -# gain freedom to liberate licensing terms. - -# It was noted that Intel IA-32 C compiler generates code which -# performs ~30% *faster* on P4 CPU than original *hand-coded* -# SHA1 assembler implementation. To address this problem (and -# prove that humans are still better than machines:-), the -# original code was overhauled, which resulted in following -# performance changes: -# -# compared with original compared with Intel cc -# assembler impl. generated code -# Pentium -16% +48% -# PIII/AMD +8% +16% -# P4 +85%(!) +45% -# -# As you can see Pentium came out as looser:-( Yet I reckoned that -# improvement on P4 outweights the loss and incorporate this -# re-tuned code to 0.9.7 and later. -# ---------------------------------------------------------------- -# <appro@fy.chalmers.se> - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -push(@INC,"${dir}","${dir}../../perlasm"); -require "x86asm.pl"; - -&asm_init($ARGV[0],"sha1-586.pl",$ARGV[$#ARGV] eq "386"); - -$A="eax"; -$B="ebx"; -$C="ecx"; -$D="edx"; -$E="edi"; -$T="esi"; -$tmp1="ebp"; - -@V=($A,$B,$C,$D,$E,$T); - -sub BODY_00_15 - { - local($n,$a,$b,$c,$d,$e,$f)=@_; - - &comment("00_15 $n"); - - &mov($f,$c); # f to hold F_00_19(b,c,d) - if ($n==0) { &mov($tmp1,$a); } - else { &mov($a,$tmp1); } - &rotl($tmp1,5); # tmp1=ROTATE(a,5) - &xor($f,$d); - &add($tmp1,$e); # tmp1+=e; - &and($f,$b); - &mov($e,&swtmp($n%16)); # e becomes volatile and is loaded - # with xi, also note that e becomes - # f in next round... - &xor($f,$d); # f holds F_00_19(b,c,d) - &rotr($b,2); # b=ROTATE(b,30) - &lea($tmp1,&DWP(0x5a827999,$tmp1,$e)); # tmp1+=K_00_19+xi - - if ($n==15) { &add($f,$tmp1); } # f+=tmp1 - else { &add($tmp1,$f); } # f becomes a in next round - } - -sub BODY_16_19 - { - local($n,$a,$b,$c,$d,$e,$f)=@_; - - &comment("16_19 $n"); - - &mov($f,&swtmp($n%16)); # f to hold Xupdate(xi,xa,xb,xc,xd) - &mov($tmp1,$c); # tmp1 to hold F_00_19(b,c,d) - &xor($f,&swtmp(($n+2)%16)); - &xor($tmp1,$d); - &xor($f,&swtmp(($n+8)%16)); - &and($tmp1,$b); # tmp1 holds F_00_19(b,c,d) - &rotr($b,2); # b=ROTATE(b,30) - &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd - &rotl($f,1); # f=ROTATE(f,1) - &xor($tmp1,$d); # tmp1=F_00_19(b,c,d) - &mov(&swtmp($n%16),$f); # xi=f - &lea($f,&DWP(0x5a827999,$f,$e));# f+=K_00_19+e - &mov($e,$a); # e becomes volatile - &rotl($e,5); # e=ROTATE(a,5) - &add($f,$tmp1); # f+=F_00_19(b,c,d) - &add($f,$e); # f+=ROTATE(a,5) - } - -sub BODY_20_39 - { - local($n,$a,$b,$c,$d,$e,$f)=@_; - local $K=($n<40)?0x6ed9eba1:0xca62c1d6; - - &comment("20_39 $n"); - - &mov($tmp1,$b); # tmp1 to hold F_20_39(b,c,d) - &mov($f,&swtmp($n%16)); # f to hold Xupdate(xi,xa,xb,xc,xd) - &rotr($b,2); # b=ROTATE(b,30) - &xor($f,&swtmp(($n+2)%16)); - &xor($tmp1,$c); - &xor($f,&swtmp(($n+8)%16)); - &xor($tmp1,$d); # tmp1 holds F_20_39(b,c,d) - &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd - &rotl($f,1); # f=ROTATE(f,1) - &add($tmp1,$e); - &mov(&swtmp($n%16),$f); # xi=f - &mov($e,$a); # e becomes volatile - &rotl($e,5); # e=ROTATE(a,5) - &lea($f,&DWP($K,$f,$tmp1)); # f+=K_20_39+e - &add($f,$e); # f+=ROTATE(a,5) - } - -sub BODY_40_59 - { - local($n,$a,$b,$c,$d,$e,$f)=@_; - - &comment("40_59 $n"); - - &mov($f,&swtmp($n%16)); # f to hold Xupdate(xi,xa,xb,xc,xd) - &mov($tmp1,&swtmp(($n+2)%16)); - &xor($f,$tmp1); - &mov($tmp1,&swtmp(($n+8)%16)); - &xor($f,$tmp1); - &mov($tmp1,&swtmp(($n+13)%16)); - &xor($f,$tmp1); # f holds xa^xb^xc^xd - &mov($tmp1,$b); # tmp1 to hold F_40_59(b,c,d) - &rotl($f,1); # f=ROTATE(f,1) - &or($tmp1,$c); - &mov(&swtmp($n%16),$f); # xi=f - &and($tmp1,$d); - &lea($f,&DWP(0x8f1bbcdc,$f,$e));# f+=K_40_59+e - &mov($e,$b); # e becomes volatile and is used - # to calculate F_40_59(b,c,d) - &rotr($b,2); # b=ROTATE(b,30) - &and($e,$c); - &or($tmp1,$e); # tmp1 holds F_40_59(b,c,d) - &mov($e,$a); - &rotl($e,5); # e=ROTATE(a,5) - &add($f,$tmp1); # f+=tmp1; - &add($f,$e); # f+=ROTATE(a,5) - } - -&function_begin("sha1_block_data_order"); - &mov($tmp1,&wparam(0)); # SHA_CTX *c - &mov($T,&wparam(1)); # const void *input - &mov($A,&wparam(2)); # size_t num - &stack_push(16); # allocate X[16] - &shl($A,6); - &add($A,$T); - &mov(&wparam(2),$A); # pointer beyond the end of input - &mov($E,&DWP(16,$tmp1));# pre-load E - - &set_label("loop",16); - - # copy input chunk to X, but reversing byte order! - for ($i=0; $i<16; $i+=4) - { - &mov($A,&DWP(4*($i+0),$T)); - &mov($B,&DWP(4*($i+1),$T)); - &mov($C,&DWP(4*($i+2),$T)); - &mov($D,&DWP(4*($i+3),$T)); - &bswap($A); - &bswap($B); - &bswap($C); - &bswap($D); - &mov(&swtmp($i+0),$A); - &mov(&swtmp($i+1),$B); - &mov(&swtmp($i+2),$C); - &mov(&swtmp($i+3),$D); - } - &mov(&wparam(1),$T); # redundant in 1st spin - - &mov($A,&DWP(0,$tmp1)); # load SHA_CTX - &mov($B,&DWP(4,$tmp1)); - &mov($C,&DWP(8,$tmp1)); - &mov($D,&DWP(12,$tmp1)); - # E is pre-loaded - - for($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } - for(;$i<20;$i++) { &BODY_16_19($i,@V); unshift(@V,pop(@V)); } - for(;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } - for(;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } - for(;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } - - (($V[5] eq $D) and ($V[0] eq $E)) or die; # double-check - - &mov($tmp1,&wparam(0)); # re-load SHA_CTX* - &mov($D,&wparam(1)); # D is last "T" and is discarded - - &add($E,&DWP(0,$tmp1)); # E is last "A"... - &add($T,&DWP(4,$tmp1)); - &add($A,&DWP(8,$tmp1)); - &add($B,&DWP(12,$tmp1)); - &add($C,&DWP(16,$tmp1)); - - &mov(&DWP(0,$tmp1),$E); # update SHA_CTX - &add($D,64); # advance input pointer - &mov(&DWP(4,$tmp1),$T); - &cmp($D,&wparam(2)); # have we reached the end yet? - &mov(&DWP(8,$tmp1),$A); - &mov($E,$C); # C is last "E" which needs to be "pre-loaded" - &mov(&DWP(12,$tmp1),$B); - &mov($T,$D); # input pointer - &mov(&DWP(16,$tmp1),$C); - &jb(&label("loop")); - - &stack_pop(16); -&function_end("sha1_block_data_order"); -&asciz("SHA1 block transform for x86, CRYPTOGAMS by <appro\@openssl.org>"); - -&asm_finish(); diff --git a/app/openssl/crypto/sha/asm/sha1-armv4-large.pl b/app/openssl/crypto/sha/asm/sha1-armv4-large.pl deleted file mode 100644 index 79e3f613..00000000 --- a/app/openssl/crypto/sha/asm/sha1-armv4-large.pl +++ /dev/null @@ -1,229 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# sha1_block procedure for ARMv4. -# -# January 2007. - -# Size/performance trade-off -# ==================================================================== -# impl size in bytes comp cycles[*] measured performance -# ==================================================================== -# thumb 304 3212 4420 -# armv4-small 392/+29% 1958/+64% 2250/+96% -# armv4-compact 740/+89% 1552/+26% 1840/+22% -# armv4-large 1420/+92% 1307/+19% 1370/+34%[***] -# full unroll ~5100/+260% ~1260/+4% ~1300/+5% -# ==================================================================== -# thumb = same as 'small' but in Thumb instructions[**] and -# with recurring code in two private functions; -# small = detached Xload/update, loops are folded; -# compact = detached Xload/update, 5x unroll; -# large = interleaved Xload/update, 5x unroll; -# full unroll = interleaved Xload/update, full unroll, estimated[!]; -# -# [*] Manually counted instructions in "grand" loop body. Measured -# performance is affected by prologue and epilogue overhead, -# i-cache availability, branch penalties, etc. -# [**] While each Thumb instruction is twice smaller, they are not as -# diverse as ARM ones: e.g., there are only two arithmetic -# instructions with 3 arguments, no [fixed] rotate, addressing -# modes are limited. As result it takes more instructions to do -# the same job in Thumb, therefore the code is never twice as -# small and always slower. -# [***] which is also ~35% better than compiler generated code. Dual- -# issue Cortex A8 core was measured to process input block in -# ~990 cycles. - -# August 2010. -# -# Rescheduling for dual-issue pipeline resulted in 13% improvement on -# Cortex A8 core and in absolute terms ~870 cycles per input block -# [or 13.6 cycles per byte]. - - -while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {} -open STDOUT,">$output"; - -$ctx="r0"; -$inp="r1"; -$len="r2"; -$a="r3"; -$b="r4"; -$c="r5"; -$d="r6"; -$e="r7"; -$K="r8"; -$t0="r9"; -$t1="r10"; -$t2="r11"; -$t3="r12"; -$Xi="r14"; -@V=($a,$b,$c,$d,$e); - -sub Xupdate { -my ($a,$b,$c,$d,$e,$opt1,$opt2)=@_; -$code.=<<___; - ldr $t0,[$Xi,#15*4] - ldr $t1,[$Xi,#13*4] - ldr $t2,[$Xi,#7*4] - add $e,$K,$e,ror#2 @ E+=K_xx_xx - ldr $t3,[$Xi,#2*4] - eor $t0,$t0,$t1 - eor $t2,$t2,$t3 - eor $t1,$c,$d @ F_xx_xx - mov $t0,$t0,ror#31 - add $e,$e,$a,ror#27 @ E+=ROR(A,27) - eor $t0,$t0,$t2,ror#31 - $opt1 @ F_xx_xx - $opt2 @ F_xx_xx - add $e,$e,$t0 @ E+=X[i] - str $t0,[$Xi,#-4]! -___ -} - -sub BODY_00_15 { -my ($a,$b,$c,$d,$e)=@_; -$code.=<<___; - ldrb $t0,[$inp],#4 - ldrb $t1,[$inp,#-1] - ldrb $t2,[$inp,#-2] - add $e,$K,$e,ror#2 @ E+=K_00_19 - ldrb $t3,[$inp,#-3] - add $e,$e,$a,ror#27 @ E+=ROR(A,27) - orr $t0,$t1,$t0,lsl#24 - eor $t1,$c,$d @ F_xx_xx - orr $t0,$t0,$t2,lsl#8 - orr $t0,$t0,$t3,lsl#16 - and $t1,$b,$t1,ror#2 - add $e,$e,$t0 @ E+=X[i] - eor $t1,$t1,$d,ror#2 @ F_00_19(B,C,D) - str $t0,[$Xi,#-4]! - add $e,$e,$t1 @ E+=F_00_19(B,C,D) -___ -} - -sub BODY_16_19 { -my ($a,$b,$c,$d,$e)=@_; - &Xupdate(@_,"and $t1,$b,$t1,ror#2"); -$code.=<<___; - eor $t1,$t1,$d,ror#2 @ F_00_19(B,C,D) - add $e,$e,$t1 @ E+=F_00_19(B,C,D) -___ -} - -sub BODY_20_39 { -my ($a,$b,$c,$d,$e)=@_; - &Xupdate(@_,"eor $t1,$b,$t1,ror#2"); -$code.=<<___; - add $e,$e,$t1 @ E+=F_20_39(B,C,D) -___ -} - -sub BODY_40_59 { -my ($a,$b,$c,$d,$e)=@_; - &Xupdate(@_,"and $t1,$b,$t1,ror#2","and $t2,$c,$d"); -$code.=<<___; - add $e,$e,$t1 @ E+=F_40_59(B,C,D) - add $e,$e,$t2,ror#2 -___ -} - -$code=<<___; -.text - -.global sha1_block_data_order -.type sha1_block_data_order,%function - -.align 2 -sha1_block_data_order: - stmdb sp!,{r4-r12,lr} - add $len,$inp,$len,lsl#6 @ $len to point at the end of $inp - ldmia $ctx,{$a,$b,$c,$d,$e} -.Lloop: - ldr $K,.LK_00_19 - mov $Xi,sp - sub sp,sp,#15*4 - mov $c,$c,ror#30 - mov $d,$d,ror#30 - mov $e,$e,ror#30 @ [6] -.L_00_15: -___ -for($i=0;$i<5;$i++) { - &BODY_00_15(@V); unshift(@V,pop(@V)); -} -$code.=<<___; - teq $Xi,sp - bne .L_00_15 @ [((11+4)*5+2)*3] - sub sp,sp,#5*4 -___ - &BODY_00_15(@V); unshift(@V,pop(@V)); - &BODY_16_19(@V); unshift(@V,pop(@V)); - &BODY_16_19(@V); unshift(@V,pop(@V)); - &BODY_16_19(@V); unshift(@V,pop(@V)); - &BODY_16_19(@V); unshift(@V,pop(@V)); -$code.=<<___; - - ldr $K,.LK_20_39 @ [+15+16*4] - sub sp,sp,#20*4 - cmn sp,#0 @ [+3], clear carry to denote 20_39 -.L_20_39_or_60_79: -___ -for($i=0;$i<5;$i++) { - &BODY_20_39(@V); unshift(@V,pop(@V)); -} -$code.=<<___; - teq $Xi,sp @ preserve carry - bne .L_20_39_or_60_79 @ [+((12+3)*5+2)*4] - bcs .L_done @ [+((12+3)*5+2)*4], spare 300 bytes - - ldr $K,.LK_40_59 - sub sp,sp,#20*4 @ [+2] -.L_40_59: -___ -for($i=0;$i<5;$i++) { - &BODY_40_59(@V); unshift(@V,pop(@V)); -} -$code.=<<___; - teq $Xi,sp - bne .L_40_59 @ [+((12+5)*5+2)*4] - - ldr $K,.LK_60_79 - sub sp,sp,#20*4 - cmp sp,#0 @ set carry to denote 60_79 - b .L_20_39_or_60_79 @ [+4], spare 300 bytes -.L_done: - add sp,sp,#80*4 @ "deallocate" stack frame - ldmia $ctx,{$K,$t0,$t1,$t2,$t3} - add $a,$K,$a - add $b,$t0,$b - add $c,$t1,$c,ror#2 - add $d,$t2,$d,ror#2 - add $e,$t3,$e,ror#2 - stmia $ctx,{$a,$b,$c,$d,$e} - teq $inp,$len - bne .Lloop @ [+18], total 1307 - - ldmia sp!,{r4-r12,lr} - tst lr,#1 - moveq pc,lr @ be binary compatible with V4, yet - bx lr @ interoperable with Thumb ISA:-) -.align 2 -.LK_00_19: .word 0x5a827999 -.LK_20_39: .word 0x6ed9eba1 -.LK_40_59: .word 0x8f1bbcdc -.LK_60_79: .word 0xca62c1d6 -.size sha1_block_data_order,.-sha1_block_data_order -.asciz "SHA1 block transform for ARMv4, CRYPTOGAMS by <appro\@openssl.org>" -.align 2 -___ - -$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm; # make it possible to compile with -march=armv4 -print $code; -close STDOUT; # enforce flush diff --git a/app/openssl/crypto/sha/asm/sha1-armv4-large.s b/app/openssl/crypto/sha/asm/sha1-armv4-large.s deleted file mode 100644 index 7f687d9f..00000000 --- a/app/openssl/crypto/sha/asm/sha1-armv4-large.s +++ /dev/null @@ -1,387 +0,0 @@ -.text - -.global sha1_block_data_order -.type sha1_block_data_order,%function - -.align 2 -sha1_block_data_order: - stmdb sp!,{r4-r12,lr} - add r2,r1,r2,lsl#6 @ r2 to point at the end of r1 - ldmia r0,{r3,r4,r5,r6,r7} -.Lloop: - ldr r8,.LK_00_19 - mov r14,sp - sub sp,sp,#15*4 - mov r5,r5,ror#30 - mov r6,r6,ror#30 - mov r7,r7,ror#30 @ [6] -.L_00_15: - ldrb r9,[r1],#4 - ldrb r10,[r1,#-1] - ldrb r11,[r1,#-2] - add r7,r8,r7,ror#2 @ E+=K_00_19 - ldrb r12,[r1,#-3] - add r7,r7,r3,ror#27 @ E+=ROR(A,27) - orr r9,r10,r9,lsl#24 - eor r10,r5,r6 @ F_xx_xx - orr r9,r9,r11,lsl#8 - orr r9,r9,r12,lsl#16 - and r10,r4,r10,ror#2 - add r7,r7,r9 @ E+=X[i] - eor r10,r10,r6,ror#2 @ F_00_19(B,C,D) - str r9,[r14,#-4]! - add r7,r7,r10 @ E+=F_00_19(B,C,D) - ldrb r9,[r1],#4 - ldrb r10,[r1,#-1] - ldrb r11,[r1,#-2] - add r6,r8,r6,ror#2 @ E+=K_00_19 - ldrb r12,[r1,#-3] - add r6,r6,r7,ror#27 @ E+=ROR(A,27) - orr r9,r10,r9,lsl#24 - eor r10,r4,r5 @ F_xx_xx - orr r9,r9,r11,lsl#8 - orr r9,r9,r12,lsl#16 - and r10,r3,r10,ror#2 - add r6,r6,r9 @ E+=X[i] - eor r10,r10,r5,ror#2 @ F_00_19(B,C,D) - str r9,[r14,#-4]! - add r6,r6,r10 @ E+=F_00_19(B,C,D) - ldrb r9,[r1],#4 - ldrb r10,[r1,#-1] - ldrb r11,[r1,#-2] - add r5,r8,r5,ror#2 @ E+=K_00_19 - ldrb r12,[r1,#-3] - add r5,r5,r6,ror#27 @ E+=ROR(A,27) - orr r9,r10,r9,lsl#24 - eor r10,r3,r4 @ F_xx_xx - orr r9,r9,r11,lsl#8 - orr r9,r9,r12,lsl#16 - and r10,r7,r10,ror#2 - add r5,r5,r9 @ E+=X[i] - eor r10,r10,r4,ror#2 @ F_00_19(B,C,D) - str r9,[r14,#-4]! - add r5,r5,r10 @ E+=F_00_19(B,C,D) - ldrb r9,[r1],#4 - ldrb r10,[r1,#-1] - ldrb r11,[r1,#-2] - add r4,r8,r4,ror#2 @ E+=K_00_19 - ldrb r12,[r1,#-3] - add r4,r4,r5,ror#27 @ E+=ROR(A,27) - orr r9,r10,r9,lsl#24 - eor r10,r7,r3 @ F_xx_xx - orr r9,r9,r11,lsl#8 - orr r9,r9,r12,lsl#16 - and r10,r6,r10,ror#2 - add r4,r4,r9 @ E+=X[i] - eor r10,r10,r3,ror#2 @ F_00_19(B,C,D) - str r9,[r14,#-4]! - add r4,r4,r10 @ E+=F_00_19(B,C,D) - ldrb r9,[r1],#4 - ldrb r10,[r1,#-1] - ldrb r11,[r1,#-2] - add r3,r8,r3,ror#2 @ E+=K_00_19 - ldrb r12,[r1,#-3] - add r3,r3,r4,ror#27 @ E+=ROR(A,27) - orr r9,r10,r9,lsl#24 - eor r10,r6,r7 @ F_xx_xx - orr r9,r9,r11,lsl#8 - orr r9,r9,r12,lsl#16 - and r10,r5,r10,ror#2 - add r3,r3,r9 @ E+=X[i] - eor r10,r10,r7,ror#2 @ F_00_19(B,C,D) - str r9,[r14,#-4]! - add r3,r3,r10 @ E+=F_00_19(B,C,D) - teq r14,sp - bne .L_00_15 @ [((11+4)*5+2)*3] - sub sp,sp,#5*4 - ldrb r9,[r1],#4 - ldrb r10,[r1,#-1] - ldrb r11,[r1,#-2] - add r7,r8,r7,ror#2 @ E+=K_00_19 - ldrb r12,[r1,#-3] - add r7,r7,r3,ror#27 @ E+=ROR(A,27) - orr r9,r10,r9,lsl#24 - eor r10,r5,r6 @ F_xx_xx - orr r9,r9,r11,lsl#8 - orr r9,r9,r12,lsl#16 - and r10,r4,r10,ror#2 - add r7,r7,r9 @ E+=X[i] - eor r10,r10,r6,ror#2 @ F_00_19(B,C,D) - str r9,[r14,#-4]! - add r7,r7,r10 @ E+=F_00_19(B,C,D) - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r6,r8,r6,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r4,r5 @ F_xx_xx - mov r9,r9,ror#31 - add r6,r6,r7,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - and r10,r3,r10,ror#2 @ F_xx_xx - @ F_xx_xx - add r6,r6,r9 @ E+=X[i] - str r9,[r14,#-4]! - eor r10,r10,r5,ror#2 @ F_00_19(B,C,D) - add r6,r6,r10 @ E+=F_00_19(B,C,D) - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r5,r8,r5,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r3,r4 @ F_xx_xx - mov r9,r9,ror#31 - add r5,r5,r6,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - and r10,r7,r10,ror#2 @ F_xx_xx - @ F_xx_xx - add r5,r5,r9 @ E+=X[i] - str r9,[r14,#-4]! - eor r10,r10,r4,ror#2 @ F_00_19(B,C,D) - add r5,r5,r10 @ E+=F_00_19(B,C,D) - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r4,r8,r4,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r7,r3 @ F_xx_xx - mov r9,r9,ror#31 - add r4,r4,r5,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - and r10,r6,r10,ror#2 @ F_xx_xx - @ F_xx_xx - add r4,r4,r9 @ E+=X[i] - str r9,[r14,#-4]! - eor r10,r10,r3,ror#2 @ F_00_19(B,C,D) - add r4,r4,r10 @ E+=F_00_19(B,C,D) - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r3,r8,r3,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r6,r7 @ F_xx_xx - mov r9,r9,ror#31 - add r3,r3,r4,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - and r10,r5,r10,ror#2 @ F_xx_xx - @ F_xx_xx - add r3,r3,r9 @ E+=X[i] - str r9,[r14,#-4]! - eor r10,r10,r7,ror#2 @ F_00_19(B,C,D) - add r3,r3,r10 @ E+=F_00_19(B,C,D) - - ldr r8,.LK_20_39 @ [+15+16*4] - sub sp,sp,#20*4 - cmn sp,#0 @ [+3], clear carry to denote 20_39 -.L_20_39_or_60_79: - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r7,r8,r7,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r5,r6 @ F_xx_xx - mov r9,r9,ror#31 - add r7,r7,r3,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - eor r10,r4,r10,ror#2 @ F_xx_xx - @ F_xx_xx - add r7,r7,r9 @ E+=X[i] - str r9,[r14,#-4]! - add r7,r7,r10 @ E+=F_20_39(B,C,D) - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r6,r8,r6,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r4,r5 @ F_xx_xx - mov r9,r9,ror#31 - add r6,r6,r7,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - eor r10,r3,r10,ror#2 @ F_xx_xx - @ F_xx_xx - add r6,r6,r9 @ E+=X[i] - str r9,[r14,#-4]! - add r6,r6,r10 @ E+=F_20_39(B,C,D) - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r5,r8,r5,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r3,r4 @ F_xx_xx - mov r9,r9,ror#31 - add r5,r5,r6,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - eor r10,r7,r10,ror#2 @ F_xx_xx - @ F_xx_xx - add r5,r5,r9 @ E+=X[i] - str r9,[r14,#-4]! - add r5,r5,r10 @ E+=F_20_39(B,C,D) - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r4,r8,r4,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r7,r3 @ F_xx_xx - mov r9,r9,ror#31 - add r4,r4,r5,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - eor r10,r6,r10,ror#2 @ F_xx_xx - @ F_xx_xx - add r4,r4,r9 @ E+=X[i] - str r9,[r14,#-4]! - add r4,r4,r10 @ E+=F_20_39(B,C,D) - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r3,r8,r3,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r6,r7 @ F_xx_xx - mov r9,r9,ror#31 - add r3,r3,r4,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - eor r10,r5,r10,ror#2 @ F_xx_xx - @ F_xx_xx - add r3,r3,r9 @ E+=X[i] - str r9,[r14,#-4]! - add r3,r3,r10 @ E+=F_20_39(B,C,D) - teq r14,sp @ preserve carry - bne .L_20_39_or_60_79 @ [+((12+3)*5+2)*4] - bcs .L_done @ [+((12+3)*5+2)*4], spare 300 bytes - - ldr r8,.LK_40_59 - sub sp,sp,#20*4 @ [+2] -.L_40_59: - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r7,r8,r7,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r5,r6 @ F_xx_xx - mov r9,r9,ror#31 - add r7,r7,r3,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - and r10,r4,r10,ror#2 @ F_xx_xx - and r11,r5,r6 @ F_xx_xx - add r7,r7,r9 @ E+=X[i] - str r9,[r14,#-4]! - add r7,r7,r10 @ E+=F_40_59(B,C,D) - add r7,r7,r11,ror#2 - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r6,r8,r6,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r4,r5 @ F_xx_xx - mov r9,r9,ror#31 - add r6,r6,r7,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - and r10,r3,r10,ror#2 @ F_xx_xx - and r11,r4,r5 @ F_xx_xx - add r6,r6,r9 @ E+=X[i] - str r9,[r14,#-4]! - add r6,r6,r10 @ E+=F_40_59(B,C,D) - add r6,r6,r11,ror#2 - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r5,r8,r5,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r3,r4 @ F_xx_xx - mov r9,r9,ror#31 - add r5,r5,r6,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - and r10,r7,r10,ror#2 @ F_xx_xx - and r11,r3,r4 @ F_xx_xx - add r5,r5,r9 @ E+=X[i] - str r9,[r14,#-4]! - add r5,r5,r10 @ E+=F_40_59(B,C,D) - add r5,r5,r11,ror#2 - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r4,r8,r4,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r7,r3 @ F_xx_xx - mov r9,r9,ror#31 - add r4,r4,r5,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - and r10,r6,r10,ror#2 @ F_xx_xx - and r11,r7,r3 @ F_xx_xx - add r4,r4,r9 @ E+=X[i] - str r9,[r14,#-4]! - add r4,r4,r10 @ E+=F_40_59(B,C,D) - add r4,r4,r11,ror#2 - ldr r9,[r14,#15*4] - ldr r10,[r14,#13*4] - ldr r11,[r14,#7*4] - add r3,r8,r3,ror#2 @ E+=K_xx_xx - ldr r12,[r14,#2*4] - eor r9,r9,r10 - eor r11,r11,r12 - eor r10,r6,r7 @ F_xx_xx - mov r9,r9,ror#31 - add r3,r3,r4,ror#27 @ E+=ROR(A,27) - eor r9,r9,r11,ror#31 - and r10,r5,r10,ror#2 @ F_xx_xx - and r11,r6,r7 @ F_xx_xx - add r3,r3,r9 @ E+=X[i] - str r9,[r14,#-4]! - add r3,r3,r10 @ E+=F_40_59(B,C,D) - add r3,r3,r11,ror#2 - teq r14,sp - bne .L_40_59 @ [+((12+5)*5+2)*4] - - ldr r8,.LK_60_79 - sub sp,sp,#20*4 - cmp sp,#0 @ set carry to denote 60_79 - b .L_20_39_or_60_79 @ [+4], spare 300 bytes -.L_done: - add sp,sp,#80*4 @ "deallocate" stack frame - ldmia r0,{r8,r9,r10,r11,r12} - add r3,r8,r3 - add r4,r9,r4 - add r5,r10,r5,ror#2 - add r6,r11,r6,ror#2 - add r7,r12,r7,ror#2 - stmia r0,{r3,r4,r5,r6,r7} - teq r1,r2 - bne .Lloop @ [+18], total 1307 - - ldmia sp!,{r4-r12,lr} - tst lr,#1 - moveq pc,lr @ be binary compatible with V4, yet - .word 0xe12fff1e @ interoperable with Thumb ISA:-) -.align 2 -.LK_00_19: .word 0x5a827999 -.LK_20_39: .word 0x6ed9eba1 -.LK_40_59: .word 0x8f1bbcdc -.LK_60_79: .word 0xca62c1d6 -.size sha1_block_data_order,.-sha1_block_data_order -.asciz "SHA1 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>" -.align 2 diff --git a/app/openssl/crypto/sha/asm/sha1-ia64.pl b/app/openssl/crypto/sha/asm/sha1-ia64.pl deleted file mode 100644 index 51c4f47e..00000000 --- a/app/openssl/crypto/sha/asm/sha1-ia64.pl +++ /dev/null @@ -1,306 +0,0 @@ -#!/usr/bin/env perl -# -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== -# -# Eternal question is what's wrong with compiler generated code? The -# trick is that it's possible to reduce the number of shifts required -# to perform rotations by maintaining copy of 32-bit value in upper -# bits of 64-bit register. Just follow mux2 and shrp instructions... -# Performance under big-endian OS such as HP-UX is 179MBps*1GHz, which -# is >50% better than HP C and >2x better than gcc. - -$code=<<___; -.ident \"sha1-ia64.s, version 1.2\" -.ident \"IA-64 ISA artwork by Andy Polyakov <appro\@fy.chalmers.se>\" -.explicit - -___ - - -if ($^O eq "hpux") { - $ADDP="addp4"; - for (@ARGV) { $ADDP="add" if (/[\+DD|\-mlp]64/); } -} else { $ADDP="add"; } -for (@ARGV) { $big_endian=1 if (/\-DB_ENDIAN/); - $big_endian=0 if (/\-DL_ENDIAN/); } -if (!defined($big_endian)) - { $big_endian=(unpack('L',pack('N',1))==1); } - -#$human=1; -if ($human) { # useful for visual code auditing... - ($A,$B,$C,$D,$E,$T) = ("A","B","C","D","E","T"); - ($h0,$h1,$h2,$h3,$h4) = ("h0","h1","h2","h3","h4"); - ($K_00_19, $K_20_39, $K_40_59, $K_60_79) = - ( "K_00_19","K_20_39","K_40_59","K_60_79" ); - @X= ( "X0", "X1", "X2", "X3", "X4", "X5", "X6", "X7", - "X8", "X9","X10","X11","X12","X13","X14","X15" ); -} -else { - ($A,$B,$C,$D,$E,$T) = ("loc0","loc1","loc2","loc3","loc4","loc5"); - ($h0,$h1,$h2,$h3,$h4) = ("loc6","loc7","loc8","loc9","loc10"); - ($K_00_19, $K_20_39, $K_40_59, $K_60_79) = - ( "r14", "r15", "loc11", "loc12" ); - @X= ( "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", - "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31" ); -} - -sub BODY_00_15 { -local *code=shift; -local ($i,$a,$b,$c,$d,$e,$f)=@_; - -$code.=<<___ if ($i==0); -{ .mmi; ld1 $X[$i&0xf]=[inp],2 // MSB - ld1 tmp2=[tmp3],2 };; -{ .mmi; ld1 tmp0=[inp],2 - ld1 tmp4=[tmp3],2 // LSB - dep $X[$i&0xf]=$X[$i&0xf],tmp2,8,8 };; -___ -if ($i<15) { - $code.=<<___; -{ .mmi; ld1 $X[($i+1)&0xf]=[inp],2 // +1 - dep tmp1=tmp0,tmp4,8,8 };; -{ .mmi; ld1 tmp2=[tmp3],2 // +1 - and tmp4=$c,$b - dep $X[$i&0xf]=$X[$i&0xf],tmp1,16,16 } //;; -{ .mmi; andcm tmp1=$d,$b - add tmp0=$e,$K_00_19 - dep.z tmp5=$a,5,27 };; // a<<5 -{ .mmi; or tmp4=tmp4,tmp1 // F_00_19(b,c,d)=(b&c)|(~b&d) - add $f=tmp0,$X[$i&0xf] // f=xi+e+K_00_19 - extr.u tmp1=$a,27,5 };; // a>>27 -{ .mmi; ld1 tmp0=[inp],2 // +1 - add $f=$f,tmp4 // f+=F_00_19(b,c,d) - shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30) -{ .mmi; ld1 tmp4=[tmp3],2 // +1 - or tmp5=tmp1,tmp5 // ROTATE(a,5) - mux2 tmp6=$a,0x44 };; // see b in next iteration -{ .mii; add $f=$f,tmp5 // f+=ROTATE(a,5) - dep $X[($i+1)&0xf]=$X[($i+1)&0xf],tmp2,8,8 // +1 - mux2 $X[$i&0xf]=$X[$i&0xf],0x44 } //;; - -___ - } -else { - $code.=<<___; -{ .mii; and tmp3=$c,$b - dep tmp1=tmp0,tmp4,8,8;; - dep $X[$i&0xf]=$X[$i&0xf],tmp1,16,16 } //;; -{ .mmi; andcm tmp1=$d,$b - add tmp0=$e,$K_00_19 - dep.z tmp5=$a,5,27 };; // a<<5 -{ .mmi; or tmp4=tmp3,tmp1 // F_00_19(b,c,d)=(b&c)|(~b&d) - add $f=tmp0,$X[$i&0xf] // f=xi+e+K_00_19 - extr.u tmp1=$a,27,5 } // a>>27 -{ .mmi; xor tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf] // +1 - xor tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf] // +1 - nop.i 0 };; -{ .mmi; add $f=$f,tmp4 // f+=F_00_19(b,c,d) - xor tmp2=tmp2,tmp3 // +1 - shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30) -{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5) - mux2 tmp6=$a,0x44 };; // see b in next iteration -{ .mii; add $f=$f,tmp1 // f+=ROTATE(a,5) - shrp $e=tmp2,tmp2,31 // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1) - mux2 $X[$i&0xf]=$X[$i&0xf],0x44 };; - -___ - } -} - -sub BODY_16_19 { -local *code=shift; -local ($i,$a,$b,$c,$d,$e,$f)=@_; - -$code.=<<___; -{ .mmi; mov $X[$i&0xf]=$f // Xupdate - and tmp0=$c,$b - dep.z tmp5=$a,5,27 } // a<<5 -{ .mmi; andcm tmp1=$d,$b - add tmp4=$e,$K_00_19 };; -{ .mmi; or tmp0=tmp0,tmp1 // F_00_19(b,c,d)=(b&c)|(~b&d) - add $f=$f,tmp4 // f+=e+K_00_19 - extr.u tmp1=$a,27,5 } // a>>27 -{ .mmi; xor tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf] // +1 - xor tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf] // +1 - nop.i 0 };; -{ .mmi; add $f=$f,tmp0 // f+=F_00_19(b,c,d) - xor tmp2=tmp2,tmp3 // +1 - shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30) -{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5) - mux2 tmp6=$a,0x44 };; // see b in next iteration -{ .mii; add $f=$f,tmp1 // f+=ROTATE(a,5) - shrp $e=tmp2,tmp2,31 // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1) - nop.i 0 };; - -___ -} - -sub BODY_20_39 { -local *code=shift; -local ($i,$a,$b,$c,$d,$e,$f,$Konst)=@_; - $Konst = $K_20_39 if (!defined($Konst)); - -if ($i<79) { -$code.=<<___; -{ .mib; mov $X[$i&0xf]=$f // Xupdate - dep.z tmp5=$a,5,27 } // a<<5 -{ .mib; xor tmp0=$c,$b - add tmp4=$e,$Konst };; -{ .mmi; xor tmp0=tmp0,$d // F_20_39(b,c,d)=b^c^d - add $f=$f,tmp4 // f+=e+K_20_39 - extr.u tmp1=$a,27,5 } // a>>27 -{ .mmi; xor tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf] // +1 - xor tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf] // +1 - nop.i 0 };; -{ .mmi; add $f=$f,tmp0 // f+=F_20_39(b,c,d) - xor tmp2=tmp2,tmp3 // +1 - shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30) -{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5) - mux2 tmp6=$a,0x44 };; // see b in next iteration -{ .mii; add $f=$f,tmp1 // f+=ROTATE(a,5) - shrp $e=tmp2,tmp2,31 // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1) - nop.i 0 };; - -___ -} -else { -$code.=<<___; -{ .mib; mov $X[$i&0xf]=$f // Xupdate - dep.z tmp5=$a,5,27 } // a<<5 -{ .mib; xor tmp0=$c,$b - add tmp4=$e,$Konst };; -{ .mib; xor tmp0=tmp0,$d // F_20_39(b,c,d)=b^c^d - extr.u tmp1=$a,27,5 } // a>>27 -{ .mib; add $f=$f,tmp4 // f+=e+K_20_39 - add $h1=$h1,$a };; // wrap up -{ .mmi; add $f=$f,tmp0 // f+=F_20_39(b,c,d) - shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30) ;;? -{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5) - add $h3=$h3,$c };; // wrap up -{ .mib; add tmp3=1,inp // used in unaligned codepath - add $f=$f,tmp1 } // f+=ROTATE(a,5) -{ .mib; add $h2=$h2,$b // wrap up - add $h4=$h4,$d };; // wrap up - -___ -} -} - -sub BODY_40_59 { -local *code=shift; -local ($i,$a,$b,$c,$d,$e,$f)=@_; - -$code.=<<___; -{ .mmi; mov $X[$i&0xf]=$f // Xupdate - and tmp0=$c,$b - dep.z tmp5=$a,5,27 } // a<<5 -{ .mmi; and tmp1=$d,$b - add tmp4=$e,$K_40_59 };; -{ .mmi; or tmp0=tmp0,tmp1 // (b&c)|(b&d) - add $f=$f,tmp4 // f+=e+K_40_59 - extr.u tmp1=$a,27,5 } // a>>27 -{ .mmi; and tmp4=$c,$d - xor tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf] // +1 - xor tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf] // +1 - };; -{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5) - xor tmp2=tmp2,tmp3 // +1 - shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30) -{ .mmi; or tmp0=tmp0,tmp4 // F_40_59(b,c,d)=(b&c)|(b&d)|(c&d) - mux2 tmp6=$a,0x44 };; // see b in next iteration -{ .mii; add $f=$f,tmp0 // f+=F_40_59(b,c,d) - shrp $e=tmp2,tmp2,31;; // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1) - add $f=$f,tmp1 };; // f+=ROTATE(a,5) - -___ -} -sub BODY_60_79 { &BODY_20_39(@_,$K_60_79); } - -$code.=<<___; -.text - -tmp0=r8; -tmp1=r9; -tmp2=r10; -tmp3=r11; -ctx=r32; // in0 -inp=r33; // in1 - -// void sha1_block_data_order(SHA_CTX *c,const void *p,size_t num); -.global sha1_block_data_order# -.proc sha1_block_data_order# -.align 32 -sha1_block_data_order: - .prologue -{ .mmi; alloc tmp1=ar.pfs,3,15,0,0 - $ADDP tmp0=4,ctx - .save ar.lc,r3 - mov r3=ar.lc } -{ .mmi; $ADDP ctx=0,ctx - $ADDP inp=0,inp - mov r2=pr };; -tmp4=in2; -tmp5=loc13; -tmp6=loc14; - .body -{ .mlx; ld4 $h0=[ctx],8 - movl $K_00_19=0x5a827999 } -{ .mlx; ld4 $h1=[tmp0],8 - movl $K_20_39=0x6ed9eba1 };; -{ .mlx; ld4 $h2=[ctx],8 - movl $K_40_59=0x8f1bbcdc } -{ .mlx; ld4 $h3=[tmp0] - movl $K_60_79=0xca62c1d6 };; -{ .mmi; ld4 $h4=[ctx],-16 - add in2=-1,in2 // adjust num for ar.lc - mov ar.ec=1 };; -{ .mmi; nop.m 0 - add tmp3=1,inp - mov ar.lc=in2 };; // brp.loop.imp: too far - -.Ldtop: -{ .mmi; mov $A=$h0 - mov $B=$h1 - mux2 tmp6=$h1,0x44 } -{ .mmi; mov $C=$h2 - mov $D=$h3 - mov $E=$h4 };; - -___ - -{ my $i,@V=($A,$B,$C,$D,$E,$T); - - for($i=0;$i<16;$i++) { &BODY_00_15(\$code,$i,@V); unshift(@V,pop(@V)); } - for(;$i<20;$i++) { &BODY_16_19(\$code,$i,@V); unshift(@V,pop(@V)); } - for(;$i<40;$i++) { &BODY_20_39(\$code,$i,@V); unshift(@V,pop(@V)); } - for(;$i<60;$i++) { &BODY_40_59(\$code,$i,@V); unshift(@V,pop(@V)); } - for(;$i<80;$i++) { &BODY_60_79(\$code,$i,@V); unshift(@V,pop(@V)); } - - (($V[5] eq $D) and ($V[0] eq $E)) or die; # double-check -} - -$code.=<<___; -{ .mmb; add $h0=$h0,$E - nop.m 0 - br.ctop.dptk.many .Ldtop };; -.Ldend: -{ .mmi; add tmp0=4,ctx - mov ar.lc=r3 };; -{ .mmi; st4 [ctx]=$h0,8 - st4 [tmp0]=$h1,8 };; -{ .mmi; st4 [ctx]=$h2,8 - st4 [tmp0]=$h3 };; -{ .mib; st4 [ctx]=$h4,-16 - mov pr=r2,0x1ffff - br.ret.sptk.many b0 };; -.endp sha1_block_data_order# -stringz "SHA1 block transform for IA64, CRYPTOGAMS by <appro\@openssl.org>" -___ - -$output=shift and open STDOUT,">$output"; -print $code; diff --git a/app/openssl/crypto/sha/asm/sha1-ppc.pl b/app/openssl/crypto/sha/asm/sha1-ppc.pl deleted file mode 100755 index dcd0fcdf..00000000 --- a/app/openssl/crypto/sha/asm/sha1-ppc.pl +++ /dev/null @@ -1,319 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# I let hardware handle unaligned input(*), except on page boundaries -# (see below for details). Otherwise straightforward implementation -# with X vector in register bank. The module is big-endian [which is -# not big deal as there're no little-endian targets left around]. -# -# (*) this means that this module is inappropriate for PPC403? Does -# anybody know if pre-POWER3 can sustain unaligned load? - -# -m64 -m32 -# ---------------------------------- -# PPC970,gcc-4.0.0 +76% +59% -# Power6,xlc-7 +68% +33% - -$flavour = shift; - -if ($flavour =~ /64/) { - $SIZE_T =8; - $UCMP ="cmpld"; - $STU ="stdu"; - $POP ="ld"; - $PUSH ="std"; -} elsif ($flavour =~ /32/) { - $SIZE_T =4; - $UCMP ="cmplw"; - $STU ="stwu"; - $POP ="lwz"; - $PUSH ="stw"; -} else { die "nonsense $flavour"; } - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or -( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or -die "can't locate ppc-xlate.pl"; - -open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!"; - -$FRAME=24*$SIZE_T; - -$K ="r0"; -$sp ="r1"; -$toc="r2"; -$ctx="r3"; -$inp="r4"; -$num="r5"; -$t0 ="r15"; -$t1 ="r6"; - -$A ="r7"; -$B ="r8"; -$C ="r9"; -$D ="r10"; -$E ="r11"; -$T ="r12"; - -@V=($A,$B,$C,$D,$E,$T); -@X=("r16","r17","r18","r19","r20","r21","r22","r23", - "r24","r25","r26","r27","r28","r29","r30","r31"); - -sub BODY_00_19 { -my ($i,$a,$b,$c,$d,$e,$f)=@_; -my $j=$i+1; -$code.=<<___ if ($i==0); - lwz @X[$i],`$i*4`($inp) -___ -$code.=<<___ if ($i<15); - lwz @X[$j],`$j*4`($inp) - add $f,$K,$e - rotlwi $e,$a,5 - add $f,$f,@X[$i] - and $t0,$c,$b - add $f,$f,$e - andc $t1,$d,$b - rotlwi $b,$b,30 - or $t0,$t0,$t1 - add $f,$f,$t0 -___ -$code.=<<___ if ($i>=15); - add $f,$K,$e - rotlwi $e,$a,5 - xor @X[$j%16],@X[$j%16],@X[($j+2)%16] - add $f,$f,@X[$i%16] - and $t0,$c,$b - xor @X[$j%16],@X[$j%16],@X[($j+8)%16] - add $f,$f,$e - andc $t1,$d,$b - rotlwi $b,$b,30 - or $t0,$t0,$t1 - xor @X[$j%16],@X[$j%16],@X[($j+13)%16] - add $f,$f,$t0 - rotlwi @X[$j%16],@X[$j%16],1 -___ -} - -sub BODY_20_39 { -my ($i,$a,$b,$c,$d,$e,$f)=@_; -my $j=$i+1; -$code.=<<___ if ($i<79); - add $f,$K,$e - rotlwi $e,$a,5 - xor @X[$j%16],@X[$j%16],@X[($j+2)%16] - add $f,$f,@X[$i%16] - xor $t0,$b,$c - xor @X[$j%16],@X[$j%16],@X[($j+8)%16] - add $f,$f,$e - rotlwi $b,$b,30 - xor $t0,$t0,$d - xor @X[$j%16],@X[$j%16],@X[($j+13)%16] - add $f,$f,$t0 - rotlwi @X[$j%16],@X[$j%16],1 -___ -$code.=<<___ if ($i==79); - add $f,$K,$e - rotlwi $e,$a,5 - lwz r16,0($ctx) - add $f,$f,@X[$i%16] - xor $t0,$b,$c - lwz r17,4($ctx) - add $f,$f,$e - rotlwi $b,$b,30 - lwz r18,8($ctx) - xor $t0,$t0,$d - lwz r19,12($ctx) - add $f,$f,$t0 - lwz r20,16($ctx) -___ -} - -sub BODY_40_59 { -my ($i,$a,$b,$c,$d,$e,$f)=@_; -my $j=$i+1; -$code.=<<___; - add $f,$K,$e - rotlwi $e,$a,5 - xor @X[$j%16],@X[$j%16],@X[($j+2)%16] - add $f,$f,@X[$i%16] - and $t0,$b,$c - xor @X[$j%16],@X[$j%16],@X[($j+8)%16] - add $f,$f,$e - or $t1,$b,$c - rotlwi $b,$b,30 - xor @X[$j%16],@X[$j%16],@X[($j+13)%16] - and $t1,$t1,$d - or $t0,$t0,$t1 - rotlwi @X[$j%16],@X[$j%16],1 - add $f,$f,$t0 -___ -} - -$code=<<___; -.machine "any" -.text - -.globl .sha1_block_data_order -.align 4 -.sha1_block_data_order: - mflr r0 - $STU $sp,`-($FRAME+64)`($sp) - $PUSH r0,`$FRAME-$SIZE_T*18`($sp) - $PUSH r15,`$FRAME-$SIZE_T*17`($sp) - $PUSH r16,`$FRAME-$SIZE_T*16`($sp) - $PUSH r17,`$FRAME-$SIZE_T*15`($sp) - $PUSH r18,`$FRAME-$SIZE_T*14`($sp) - $PUSH r19,`$FRAME-$SIZE_T*13`($sp) - $PUSH r20,`$FRAME-$SIZE_T*12`($sp) - $PUSH r21,`$FRAME-$SIZE_T*11`($sp) - $PUSH r22,`$FRAME-$SIZE_T*10`($sp) - $PUSH r23,`$FRAME-$SIZE_T*9`($sp) - $PUSH r24,`$FRAME-$SIZE_T*8`($sp) - $PUSH r25,`$FRAME-$SIZE_T*7`($sp) - $PUSH r26,`$FRAME-$SIZE_T*6`($sp) - $PUSH r27,`$FRAME-$SIZE_T*5`($sp) - $PUSH r28,`$FRAME-$SIZE_T*4`($sp) - $PUSH r29,`$FRAME-$SIZE_T*3`($sp) - $PUSH r30,`$FRAME-$SIZE_T*2`($sp) - $PUSH r31,`$FRAME-$SIZE_T*1`($sp) - lwz $A,0($ctx) - lwz $B,4($ctx) - lwz $C,8($ctx) - lwz $D,12($ctx) - lwz $E,16($ctx) - andi. r0,$inp,3 - bne Lunaligned -Laligned: - mtctr $num - bl Lsha1_block_private -Ldone: - $POP r0,`$FRAME-$SIZE_T*18`($sp) - $POP r15,`$FRAME-$SIZE_T*17`($sp) - $POP r16,`$FRAME-$SIZE_T*16`($sp) - $POP r17,`$FRAME-$SIZE_T*15`($sp) - $POP r18,`$FRAME-$SIZE_T*14`($sp) - $POP r19,`$FRAME-$SIZE_T*13`($sp) - $POP r20,`$FRAME-$SIZE_T*12`($sp) - $POP r21,`$FRAME-$SIZE_T*11`($sp) - $POP r22,`$FRAME-$SIZE_T*10`($sp) - $POP r23,`$FRAME-$SIZE_T*9`($sp) - $POP r24,`$FRAME-$SIZE_T*8`($sp) - $POP r25,`$FRAME-$SIZE_T*7`($sp) - $POP r26,`$FRAME-$SIZE_T*6`($sp) - $POP r27,`$FRAME-$SIZE_T*5`($sp) - $POP r28,`$FRAME-$SIZE_T*4`($sp) - $POP r29,`$FRAME-$SIZE_T*3`($sp) - $POP r30,`$FRAME-$SIZE_T*2`($sp) - $POP r31,`$FRAME-$SIZE_T*1`($sp) - mtlr r0 - addi $sp,$sp,`$FRAME+64` - blr -___ - -# PowerPC specification allows an implementation to be ill-behaved -# upon unaligned access which crosses page boundary. "Better safe -# than sorry" principle makes me treat it specially. But I don't -# look for particular offending word, but rather for 64-byte input -# block which crosses the boundary. Once found that block is aligned -# and hashed separately... -$code.=<<___; -.align 4 -Lunaligned: - subfic $t1,$inp,4096 - andi. $t1,$t1,4095 ; distance to closest page boundary - srwi. $t1,$t1,6 ; t1/=64 - beq Lcross_page - $UCMP $num,$t1 - ble- Laligned ; didn't cross the page boundary - mtctr $t1 - subfc $num,$t1,$num - bl Lsha1_block_private -Lcross_page: - li $t1,16 - mtctr $t1 - addi r20,$sp,$FRAME ; spot below the frame -Lmemcpy: - lbz r16,0($inp) - lbz r17,1($inp) - lbz r18,2($inp) - lbz r19,3($inp) - addi $inp,$inp,4 - stb r16,0(r20) - stb r17,1(r20) - stb r18,2(r20) - stb r19,3(r20) - addi r20,r20,4 - bdnz Lmemcpy - - $PUSH $inp,`$FRAME-$SIZE_T*19`($sp) - li $t1,1 - addi $inp,$sp,$FRAME - mtctr $t1 - bl Lsha1_block_private - $POP $inp,`$FRAME-$SIZE_T*19`($sp) - addic. $num,$num,-1 - bne- Lunaligned - b Ldone -___ - -# This is private block function, which uses tailored calling -# interface, namely upon entry SHA_CTX is pre-loaded to given -# registers and counter register contains amount of chunks to -# digest... -$code.=<<___; -.align 4 -Lsha1_block_private: -___ -$code.=<<___; # load K_00_19 - lis $K,0x5a82 - ori $K,$K,0x7999 -___ -for($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; # load K_20_39 - lis $K,0x6ed9 - ori $K,$K,0xeba1 -___ -for(;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; # load K_40_59 - lis $K,0x8f1b - ori $K,$K,0xbcdc -___ -for(;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; # load K_60_79 - lis $K,0xca62 - ori $K,$K,0xc1d6 -___ -for(;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; - add r16,r16,$E - add r17,r17,$T - add r18,r18,$A - add r19,r19,$B - add r20,r20,$C - stw r16,0($ctx) - mr $A,r16 - stw r17,4($ctx) - mr $B,r17 - stw r18,8($ctx) - mr $C,r18 - stw r19,12($ctx) - mr $D,r19 - stw r20,16($ctx) - mr $E,r20 - addi $inp,$inp,`16*4` - bdnz- Lsha1_block_private - blr -___ -$code.=<<___; -.asciz "SHA1 block transform for PPC, CRYPTOGAMS by <appro\@fy.chalmers.se>" -___ - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -print $code; -close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha1-s390x.pl b/app/openssl/crypto/sha/asm/sha1-s390x.pl deleted file mode 100644 index 4b178482..00000000 --- a/app/openssl/crypto/sha/asm/sha1-s390x.pl +++ /dev/null @@ -1,226 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# SHA1 block procedure for s390x. - -# April 2007. -# -# Performance is >30% better than gcc 3.3 generated code. But the real -# twist is that SHA1 hardware support is detected and utilized. In -# which case performance can reach further >4.5x for larger chunks. - -# January 2009. -# -# Optimize Xupdate for amount of memory references and reschedule -# instructions to favour dual-issue z10 pipeline. On z10 hardware is -# "only" ~2.3x faster than software. - -$kimdfunc=1; # magic function code for kimd instruction - -$output=shift; -open STDOUT,">$output"; - -$K_00_39="%r0"; $K=$K_00_39; -$K_40_79="%r1"; -$ctx="%r2"; $prefetch="%r2"; -$inp="%r3"; -$len="%r4"; - -$A="%r5"; -$B="%r6"; -$C="%r7"; -$D="%r8"; -$E="%r9"; @V=($A,$B,$C,$D,$E); -$t0="%r10"; -$t1="%r11"; -@X=("%r12","%r13","%r14"); -$sp="%r15"; - -$frame=160+16*4; - -sub Xupdate { -my $i=shift; - -$code.=<<___ if ($i==15); - lg $prefetch,160($sp) ### Xupdate(16) warm-up - lr $X[0],$X[2] -___ -return if ($i&1); # Xupdate is vectorized and executed every 2nd cycle -$code.=<<___ if ($i<16); - lg $X[0],`$i*4`($inp) ### Xload($i) - rllg $X[1],$X[0],32 -___ -$code.=<<___ if ($i>=16); - xgr $X[0],$prefetch ### Xupdate($i) - lg $prefetch,`160+4*(($i+2)%16)`($sp) - xg $X[0],`160+4*(($i+8)%16)`($sp) - xgr $X[0],$prefetch - rll $X[0],$X[0],1 - rllg $X[1],$X[0],32 - rll $X[1],$X[1],1 - rllg $X[0],$X[1],32 - lr $X[2],$X[1] # feedback -___ -$code.=<<___ if ($i<=70); - stg $X[0],`160+4*($i%16)`($sp) -___ -unshift(@X,pop(@X)); -} - -sub BODY_00_19 { -my ($i,$a,$b,$c,$d,$e)=@_; -my $xi=$X[1]; - - &Xupdate($i); -$code.=<<___; - alr $e,$K ### $i - rll $t1,$a,5 - lr $t0,$d - xr $t0,$c - alr $e,$t1 - nr $t0,$b - alr $e,$xi - xr $t0,$d - rll $b,$b,30 - alr $e,$t0 -___ -} - -sub BODY_20_39 { -my ($i,$a,$b,$c,$d,$e)=@_; -my $xi=$X[1]; - - &Xupdate($i); -$code.=<<___; - alr $e,$K ### $i - rll $t1,$a,5 - lr $t0,$b - alr $e,$t1 - xr $t0,$c - alr $e,$xi - xr $t0,$d - rll $b,$b,30 - alr $e,$t0 -___ -} - -sub BODY_40_59 { -my ($i,$a,$b,$c,$d,$e)=@_; -my $xi=$X[1]; - - &Xupdate($i); -$code.=<<___; - alr $e,$K ### $i - rll $t1,$a,5 - lr $t0,$b - alr $e,$t1 - or $t0,$c - lr $t1,$b - nr $t0,$d - nr $t1,$c - alr $e,$xi - or $t0,$t1 - rll $b,$b,30 - alr $e,$t0 -___ -} - -$code.=<<___; -.text -.align 64 -.type Ktable,\@object -Ktable: .long 0x5a827999,0x6ed9eba1,0x8f1bbcdc,0xca62c1d6 - .skip 48 #.long 0,0,0,0,0,0,0,0,0,0,0,0 -.size Ktable,.-Ktable -.globl sha1_block_data_order -.type sha1_block_data_order,\@function -sha1_block_data_order: -___ -$code.=<<___ if ($kimdfunc); - larl %r1,OPENSSL_s390xcap_P - lg %r0,0(%r1) - tmhl %r0,0x4000 # check for message-security assist - jz .Lsoftware - lghi %r0,0 - la %r1,16($sp) - .long 0xb93e0002 # kimd %r0,%r2 - lg %r0,16($sp) - tmhh %r0,`0x8000>>$kimdfunc` - jz .Lsoftware - lghi %r0,$kimdfunc - lgr %r1,$ctx - lgr %r2,$inp - sllg %r3,$len,6 - .long 0xb93e0002 # kimd %r0,%r2 - brc 1,.-4 # pay attention to "partial completion" - br %r14 -.align 16 -.Lsoftware: -___ -$code.=<<___; - lghi %r1,-$frame - stg $ctx,16($sp) - stmg %r6,%r15,48($sp) - lgr %r0,$sp - la $sp,0(%r1,$sp) - stg %r0,0($sp) - - larl $t0,Ktable - llgf $A,0($ctx) - llgf $B,4($ctx) - llgf $C,8($ctx) - llgf $D,12($ctx) - llgf $E,16($ctx) - - lg $K_00_39,0($t0) - lg $K_40_79,8($t0) - -.Lloop: - rllg $K_00_39,$K_00_39,32 -___ -for ($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; - rllg $K_00_39,$K_00_39,32 -___ -for (;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; $K=$K_40_79; - rllg $K_40_79,$K_40_79,32 -___ -for (;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; - rllg $K_40_79,$K_40_79,32 -___ -for (;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; - - lg $ctx,`$frame+16`($sp) - la $inp,64($inp) - al $A,0($ctx) - al $B,4($ctx) - al $C,8($ctx) - al $D,12($ctx) - al $E,16($ctx) - st $A,0($ctx) - st $B,4($ctx) - st $C,8($ctx) - st $D,12($ctx) - st $E,16($ctx) - brct $len,.Lloop - - lmg %r6,%r15,`$frame+48`($sp) - br %r14 -.size sha1_block_data_order,.-sha1_block_data_order -.string "SHA1 block transform for s390x, CRYPTOGAMS by <appro\@openssl.org>" -.comm OPENSSL_s390xcap_P,8,8 -___ - -$code =~ s/\`([^\`]*)\`/eval $1/gem; - -print $code; -close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha1-sparcv9.pl b/app/openssl/crypto/sha/asm/sha1-sparcv9.pl deleted file mode 100644 index 5c161cec..00000000 --- a/app/openssl/crypto/sha/asm/sha1-sparcv9.pl +++ /dev/null @@ -1,284 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# Performance improvement is not really impressive on pre-T1 CPU: +8% -# over Sun C and +25% over gcc [3.3]. While on T1, a.k.a. Niagara, it -# turned to be 40% faster than 64-bit code generated by Sun C 5.8 and -# >2x than 64-bit code generated by gcc 3.4. And there is a gimmick. -# X[16] vector is packed to 8 64-bit registers and as result nothing -# is spilled on stack. In addition input data is loaded in compact -# instruction sequence, thus minimizing the window when the code is -# subject to [inter-thread] cache-thrashing hazard. The goal is to -# ensure scalability on UltraSPARC T1, or rather to avoid decay when -# amount of active threads exceeds the number of physical cores. - -$bits=32; -for (@ARGV) { $bits=64 if (/\-m64/ || /\-xarch\=v9/); } -if ($bits==64) { $bias=2047; $frame=192; } -else { $bias=0; $frame=112; } - -$output=shift; -open STDOUT,">$output"; - -@X=("%o0","%o1","%o2","%o3","%o4","%o5","%g1","%o7"); -$rot1m="%g2"; -$tmp64="%g3"; -$Xi="%g4"; -$A="%l0"; -$B="%l1"; -$C="%l2"; -$D="%l3"; -$E="%l4"; -@V=($A,$B,$C,$D,$E); -$K_00_19="%l5"; -$K_20_39="%l6"; -$K_40_59="%l7"; -$K_60_79="%g5"; -@K=($K_00_19,$K_20_39,$K_40_59,$K_60_79); - -$ctx="%i0"; -$inp="%i1"; -$len="%i2"; -$tmp0="%i3"; -$tmp1="%i4"; -$tmp2="%i5"; - -sub BODY_00_15 { -my ($i,$a,$b,$c,$d,$e)=@_; -my $xi=($i&1)?@X[($i/2)%8]:$Xi; - -$code.=<<___; - sll $a,5,$tmp0 !! $i - add @K[$i/20],$e,$e - srl $a,27,$tmp1 - add $tmp0,$e,$e - and $c,$b,$tmp0 - add $tmp1,$e,$e - sll $b,30,$tmp2 - andn $d,$b,$tmp1 - srl $b,2,$b - or $tmp1,$tmp0,$tmp1 - or $tmp2,$b,$b - add $xi,$e,$e -___ -if ($i&1 && $i<15) { - $code.= - " srlx @X[(($i+1)/2)%8],32,$Xi\n"; -} -$code.=<<___; - add $tmp1,$e,$e -___ -} - -sub Xupdate { -my ($i,$a,$b,$c,$d,$e)=@_; -my $j=$i/2; - -if ($i&1) { -$code.=<<___; - sll $a,5,$tmp0 !! $i - add @K[$i/20],$e,$e - srl $a,27,$tmp1 -___ -} else { -$code.=<<___; - sllx @X[($j+6)%8],32,$Xi ! Xupdate($i) - xor @X[($j+1)%8],@X[$j%8],@X[$j%8] - srlx @X[($j+7)%8],32,$tmp1 - xor @X[($j+4)%8],@X[$j%8],@X[$j%8] - sll $a,5,$tmp0 !! $i - or $tmp1,$Xi,$Xi - add @K[$i/20],$e,$e !! - xor $Xi,@X[$j%8],@X[$j%8] - srlx @X[$j%8],31,$Xi - add @X[$j%8],@X[$j%8],@X[$j%8] - and $Xi,$rot1m,$Xi - andn @X[$j%8],$rot1m,@X[$j%8] - srl $a,27,$tmp1 !! - or $Xi,@X[$j%8],@X[$j%8] -___ -} -} - -sub BODY_16_19 { -my ($i,$a,$b,$c,$d,$e)=@_; - - &Xupdate(@_); - if ($i&1) { - $xi=@X[($i/2)%8]; - } else { - $xi=$Xi; - $code.="\tsrlx @X[($i/2)%8],32,$xi\n"; - } -$code.=<<___; - add $tmp0,$e,$e !! - and $c,$b,$tmp0 - add $tmp1,$e,$e - sll $b,30,$tmp2 - add $xi,$e,$e - andn $d,$b,$tmp1 - srl $b,2,$b - or $tmp1,$tmp0,$tmp1 - or $tmp2,$b,$b - add $tmp1,$e,$e -___ -} - -sub BODY_20_39 { -my ($i,$a,$b,$c,$d,$e)=@_; -my $xi; - &Xupdate(@_); - if ($i&1) { - $xi=@X[($i/2)%8]; - } else { - $xi=$Xi; - $code.="\tsrlx @X[($i/2)%8],32,$xi\n"; - } -$code.=<<___; - add $tmp0,$e,$e !! - xor $c,$b,$tmp0 - add $tmp1,$e,$e - sll $b,30,$tmp2 - xor $d,$tmp0,$tmp1 - srl $b,2,$b - add $tmp1,$e,$e - or $tmp2,$b,$b - add $xi,$e,$e -___ -} - -sub BODY_40_59 { -my ($i,$a,$b,$c,$d,$e)=@_; -my $xi; - &Xupdate(@_); - if ($i&1) { - $xi=@X[($i/2)%8]; - } else { - $xi=$Xi; - $code.="\tsrlx @X[($i/2)%8],32,$xi\n"; - } -$code.=<<___; - add $tmp0,$e,$e !! - and $c,$b,$tmp0 - add $tmp1,$e,$e - sll $b,30,$tmp2 - or $c,$b,$tmp1 - srl $b,2,$b - and $d,$tmp1,$tmp1 - add $xi,$e,$e - or $tmp1,$tmp0,$tmp1 - or $tmp2,$b,$b - add $tmp1,$e,$e -___ -} - -$code.=<<___ if ($bits==64); -.register %g2,#scratch -.register %g3,#scratch -___ -$code.=<<___; -.section ".text",#alloc,#execinstr - -.align 32 -.globl sha1_block_data_order -sha1_block_data_order: - save %sp,-$frame,%sp - sllx $len,6,$len - add $inp,$len,$len - - or %g0,1,$rot1m - sllx $rot1m,32,$rot1m - or $rot1m,1,$rot1m - - ld [$ctx+0],$A - ld [$ctx+4],$B - ld [$ctx+8],$C - ld [$ctx+12],$D - ld [$ctx+16],$E - andn $inp,7,$tmp0 - - sethi %hi(0x5a827999),$K_00_19 - or $K_00_19,%lo(0x5a827999),$K_00_19 - sethi %hi(0x6ed9eba1),$K_20_39 - or $K_20_39,%lo(0x6ed9eba1),$K_20_39 - sethi %hi(0x8f1bbcdc),$K_40_59 - or $K_40_59,%lo(0x8f1bbcdc),$K_40_59 - sethi %hi(0xca62c1d6),$K_60_79 - or $K_60_79,%lo(0xca62c1d6),$K_60_79 - -.Lloop: - ldx [$tmp0+0],@X[0] - ldx [$tmp0+16],@X[2] - ldx [$tmp0+32],@X[4] - ldx [$tmp0+48],@X[6] - and $inp,7,$tmp1 - ldx [$tmp0+8],@X[1] - sll $tmp1,3,$tmp1 - ldx [$tmp0+24],@X[3] - subcc %g0,$tmp1,$tmp2 ! should be 64-$tmp1, but -$tmp1 works too - ldx [$tmp0+40],@X[5] - bz,pt %icc,.Laligned - ldx [$tmp0+56],@X[7] - - sllx @X[0],$tmp1,@X[0] - ldx [$tmp0+64],$tmp64 -___ -for($i=0;$i<7;$i++) -{ $code.=<<___; - srlx @X[$i+1],$tmp2,$Xi - sllx @X[$i+1],$tmp1,@X[$i+1] - or $Xi,@X[$i],@X[$i] -___ -} -$code.=<<___; - srlx $tmp64,$tmp2,$tmp64 - or $tmp64,@X[7],@X[7] -.Laligned: - srlx @X[0],32,$Xi -___ -for ($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } -for (;$i<20;$i++) { &BODY_16_19($i,@V); unshift(@V,pop(@V)); } -for (;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } -for (;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } -for (;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; - - ld [$ctx+0],@X[0] - ld [$ctx+4],@X[1] - ld [$ctx+8],@X[2] - ld [$ctx+12],@X[3] - add $inp,64,$inp - ld [$ctx+16],@X[4] - cmp $inp,$len - - add $A,@X[0],$A - st $A,[$ctx+0] - add $B,@X[1],$B - st $B,[$ctx+4] - add $C,@X[2],$C - st $C,[$ctx+8] - add $D,@X[3],$D - st $D,[$ctx+12] - add $E,@X[4],$E - st $E,[$ctx+16] - - bne `$bits==64?"%xcc":"%icc"`,.Lloop - andn $inp,7,$tmp0 - - ret - restore -.type sha1_block_data_order,#function -.size sha1_block_data_order,(.-sha1_block_data_order) -.asciz "SHA1 block transform for SPARCv9, CRYPTOGAMS by <appro\@openssl.org>" -.align 4 -___ - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -print $code; -close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha1-sparcv9a.pl b/app/openssl/crypto/sha/asm/sha1-sparcv9a.pl deleted file mode 100644 index 85e8d680..00000000 --- a/app/openssl/crypto/sha/asm/sha1-sparcv9a.pl +++ /dev/null @@ -1,601 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# January 2009 -# -# Provided that UltraSPARC VIS instructions are pipe-lined(*) and -# pairable(*) with IALU ones, offloading of Xupdate to the UltraSPARC -# Graphic Unit would make it possible to achieve higher instruction- -# level parallelism, ILP, and thus higher performance. It should be -# explicitly noted that ILP is the keyword, and it means that this -# code would be unsuitable for cores like UltraSPARC-Tx. The idea is -# not really novel, Sun had VIS-powered implementation for a while. -# Unlike Sun's implementation this one can process multiple unaligned -# input blocks, and as such works as drop-in replacement for OpenSSL -# sha1_block_data_order. Performance improvement was measured to be -# 40% over pure IALU sha1-sparcv9.pl on UltraSPARC-IIi, but 12% on -# UltraSPARC-III. See below for discussion... -# -# The module does not present direct interest for OpenSSL, because -# it doesn't provide better performance on contemporary SPARCv9 CPUs, -# UltraSPARC-Tx and SPARC64-V[II] to be specific. Those who feel they -# absolutely must score on UltraSPARC-I-IV can simply replace -# crypto/sha/asm/sha1-sparcv9.pl with this module. -# -# (*) "Pipe-lined" means that even if it takes several cycles to -# complete, next instruction using same functional unit [but not -# depending on the result of the current instruction] can start -# execution without having to wait for the unit. "Pairable" -# means that two [or more] independent instructions can be -# issued at the very same time. - -$bits=32; -for (@ARGV) { $bits=64 if (/\-m64/ || /\-xarch\=v9/); } -if ($bits==64) { $bias=2047; $frame=192; } -else { $bias=0; $frame=112; } - -$output=shift; -open STDOUT,">$output"; - -$ctx="%i0"; -$inp="%i1"; -$len="%i2"; -$tmp0="%i3"; -$tmp1="%i4"; -$tmp2="%i5"; -$tmp3="%g5"; - -$base="%g1"; -$align="%g4"; -$Xfer="%o5"; -$nXfer=$tmp3; -$Xi="%o7"; - -$A="%l0"; -$B="%l1"; -$C="%l2"; -$D="%l3"; -$E="%l4"; -@V=($A,$B,$C,$D,$E); - -$Actx="%o0"; -$Bctx="%o1"; -$Cctx="%o2"; -$Dctx="%o3"; -$Ectx="%o4"; - -$fmul="%f32"; -$VK_00_19="%f34"; -$VK_20_39="%f36"; -$VK_40_59="%f38"; -$VK_60_79="%f40"; -@VK=($VK_00_19,$VK_20_39,$VK_40_59,$VK_60_79); -@X=("%f0", "%f1", "%f2", "%f3", "%f4", "%f5", "%f6", "%f7", - "%f8", "%f9","%f10","%f11","%f12","%f13","%f14","%f15","%f16"); - -# This is reference 2x-parallelized VIS-powered Xupdate procedure. It -# covers even K_NN_MM addition... -sub Xupdate { -my ($i)=@_; -my $K=@VK[($i+16)/20]; -my $j=($i+16)%16; - -# [ provided that GSR.alignaddr_offset is 5, $mul contains -# 0x100ULL<<32|0x100 value and K_NN_MM are pre-loaded to -# chosen registers... ] -$code.=<<___; - fxors @X[($j+13)%16],@X[$j],@X[$j] !-1/-1/-1:X[0]^=X[13] - fxors @X[($j+14)%16],@X[$j+1],@X[$j+1]! 0/ 0/ 0:X[1]^=X[14] - fxor @X[($j+2)%16],@X[($j+8)%16],%f18! 1/ 1/ 1:Tmp=X[2,3]^X[8,9] - fxor %f18,@X[$j],@X[$j] ! 2/ 4/ 3:X[0,1]^=X[2,3]^X[8,9] - faligndata @X[$j],@X[$j],%f18 ! 3/ 7/ 5:Tmp=X[0,1]>>>24 - fpadd32 @X[$j],@X[$j],@X[$j] ! 4/ 8/ 6:X[0,1]<<=1 - fmul8ulx16 %f18,$fmul,%f18 ! 5/10/ 7:Tmp>>=7, Tmp&=1 - ![fxors %f15,%f2,%f2] - for %f18,@X[$j],@X[$j] ! 8/14/10:X[0,1]|=Tmp - ![fxors %f0,%f3,%f3] !10/17/12:X[0] dependency - fpadd32 $K,@X[$j],%f20 - std %f20,[$Xfer+`4*$j`] -___ -# The numbers delimited with slash are the earliest possible dispatch -# cycles for given instruction assuming 1 cycle latency for simple VIS -# instructions, such as on UltraSPARC-I&II, 3 cycles latency, such as -# on UltraSPARC-III&IV, and 2 cycles latency(*), respectively. Being -# 2x-parallelized the procedure is "worth" 5, 8.5 or 6 ticks per SHA1 -# round. As [long as] FPU/VIS instructions are perfectly pairable with -# IALU ones, the round timing is defined by the maximum between VIS -# and IALU timings. The latter varies from round to round and averages -# out at 6.25 ticks. This means that USI&II should operate at IALU -# rate, while USIII&IV - at VIS rate. This explains why performance -# improvement varies among processors. Well, given that pure IALU -# sha1-sparcv9.pl module exhibits virtually uniform performance of -# ~9.3 cycles per SHA1 round. Timings mentioned above are theoretical -# lower limits. Real-life performance was measured to be 6.6 cycles -# per SHA1 round on USIIi and 8.3 on USIII. The latter is lower than -# half-round VIS timing, because there are 16 Xupdate-free rounds, -# which "push down" average theoretical timing to 8 cycles... - -# (*) SPARC64-V[II] was originally believed to have 2 cycles VIS -# latency. Well, it might have, but it doesn't have dedicated -# VIS-unit. Instead, VIS instructions are executed by other -# functional units, ones used here - by IALU. This doesn't -# improve effective ILP... -} - -# The reference Xupdate procedure is then "strained" over *pairs* of -# BODY_NN_MM and kind of modulo-scheduled in respect to X[n]^=X[n+13] -# and K_NN_MM addition. It's "running" 15 rounds ahead, which leaves -# plenty of room to amortize for read-after-write hazard, as well as -# to fetch and align input for the next spin. The VIS instructions are -# scheduled for latency of 2 cycles, because there are not enough IALU -# instructions to schedule for latency of 3, while scheduling for 1 -# would give no gain on USI&II anyway. - -sub BODY_00_19 { -my ($i,$a,$b,$c,$d,$e)=@_; -my $j=$i&~1; -my $k=($j+16+2)%16; # ahead reference -my $l=($j+16-2)%16; # behind reference -my $K=@VK[($j+16-2)/20]; - -$j=($j+16)%16; - -$code.=<<___ if (!($i&1)); - sll $a,5,$tmp0 !! $i - and $c,$b,$tmp3 - ld [$Xfer+`4*($i%16)`],$Xi - fxors @X[($j+14)%16],@X[$j+1],@X[$j+1]! 0/ 0/ 0:X[1]^=X[14] - srl $a,27,$tmp1 - add $tmp0,$e,$e - fxor @X[($j+2)%16],@X[($j+8)%16],%f18! 1/ 1/ 1:Tmp=X[2,3]^X[8,9] - sll $b,30,$tmp2 - add $tmp1,$e,$e - andn $d,$b,$tmp1 - add $Xi,$e,$e - fxor %f18,@X[$j],@X[$j] ! 2/ 4/ 3:X[0,1]^=X[2,3]^X[8,9] - srl $b,2,$b - or $tmp1,$tmp3,$tmp1 - or $tmp2,$b,$b - add $tmp1,$e,$e - faligndata @X[$j],@X[$j],%f18 ! 3/ 7/ 5:Tmp=X[0,1]>>>24 -___ -$code.=<<___ if ($i&1); - sll $a,5,$tmp0 !! $i - and $c,$b,$tmp3 - ld [$Xfer+`4*($i%16)`],$Xi - fpadd32 @X[$j],@X[$j],@X[$j] ! 4/ 8/ 6:X[0,1]<<=1 - srl $a,27,$tmp1 - add $tmp0,$e,$e - fmul8ulx16 %f18,$fmul,%f18 ! 5/10/ 7:Tmp>>=7, Tmp&=1 - sll $b,30,$tmp2 - add $tmp1,$e,$e - fpadd32 $K,@X[$l],%f20 ! - andn $d,$b,$tmp1 - add $Xi,$e,$e - fxors @X[($k+13)%16],@X[$k],@X[$k] !-1/-1/-1:X[0]^=X[13] - srl $b,2,$b - or $tmp1,$tmp3,$tmp1 - fxor %f18,@X[$j],@X[$j] ! 8/14/10:X[0,1]|=Tmp - or $tmp2,$b,$b - add $tmp1,$e,$e -___ -$code.=<<___ if ($i&1 && $i>=2); - std %f20,[$Xfer+`4*$l`] ! -___ -} - -sub BODY_20_39 { -my ($i,$a,$b,$c,$d,$e)=@_; -my $j=$i&~1; -my $k=($j+16+2)%16; # ahead reference -my $l=($j+16-2)%16; # behind reference -my $K=@VK[($j+16-2)/20]; - -$j=($j+16)%16; - -$code.=<<___ if (!($i&1) && $i<64); - sll $a,5,$tmp0 !! $i - ld [$Xfer+`4*($i%16)`],$Xi - fxors @X[($j+14)%16],@X[$j+1],@X[$j+1]! 0/ 0/ 0:X[1]^=X[14] - srl $a,27,$tmp1 - add $tmp0,$e,$e - fxor @X[($j+2)%16],@X[($j+8)%16],%f18! 1/ 1/ 1:Tmp=X[2,3]^X[8,9] - xor $c,$b,$tmp0 - add $tmp1,$e,$e - sll $b,30,$tmp2 - xor $d,$tmp0,$tmp1 - fxor %f18,@X[$j],@X[$j] ! 2/ 4/ 3:X[0,1]^=X[2,3]^X[8,9] - srl $b,2,$b - add $tmp1,$e,$e - or $tmp2,$b,$b - add $Xi,$e,$e - faligndata @X[$j],@X[$j],%f18 ! 3/ 7/ 5:Tmp=X[0,1]>>>24 -___ -$code.=<<___ if ($i&1 && $i<64); - sll $a,5,$tmp0 !! $i - ld [$Xfer+`4*($i%16)`],$Xi - fpadd32 @X[$j],@X[$j],@X[$j] ! 4/ 8/ 6:X[0,1]<<=1 - srl $a,27,$tmp1 - add $tmp0,$e,$e - fmul8ulx16 %f18,$fmul,%f18 ! 5/10/ 7:Tmp>>=7, Tmp&=1 - xor $c,$b,$tmp0 - add $tmp1,$e,$e - fpadd32 $K,@X[$l],%f20 ! - sll $b,30,$tmp2 - xor $d,$tmp0,$tmp1 - fxors @X[($k+13)%16],@X[$k],@X[$k] !-1/-1/-1:X[0]^=X[13] - srl $b,2,$b - add $tmp1,$e,$e - fxor %f18,@X[$j],@X[$j] ! 8/14/10:X[0,1]|=Tmp - or $tmp2,$b,$b - add $Xi,$e,$e - std %f20,[$Xfer+`4*$l`] ! -___ -$code.=<<___ if ($i==64); - sll $a,5,$tmp0 !! $i - ld [$Xfer+`4*($i%16)`],$Xi - fpadd32 $K,@X[$l],%f20 - srl $a,27,$tmp1 - add $tmp0,$e,$e - xor $c,$b,$tmp0 - add $tmp1,$e,$e - sll $b,30,$tmp2 - xor $d,$tmp0,$tmp1 - std %f20,[$Xfer+`4*$l`] - srl $b,2,$b - add $tmp1,$e,$e - or $tmp2,$b,$b - add $Xi,$e,$e -___ -$code.=<<___ if ($i>64); - sll $a,5,$tmp0 !! $i - ld [$Xfer+`4*($i%16)`],$Xi - srl $a,27,$tmp1 - add $tmp0,$e,$e - xor $c,$b,$tmp0 - add $tmp1,$e,$e - sll $b,30,$tmp2 - xor $d,$tmp0,$tmp1 - srl $b,2,$b - add $tmp1,$e,$e - or $tmp2,$b,$b - add $Xi,$e,$e -___ -} - -sub BODY_40_59 { -my ($i,$a,$b,$c,$d,$e)=@_; -my $j=$i&~1; -my $k=($j+16+2)%16; # ahead reference -my $l=($j+16-2)%16; # behind reference -my $K=@VK[($j+16-2)/20]; - -$j=($j+16)%16; - -$code.=<<___ if (!($i&1)); - sll $a,5,$tmp0 !! $i - ld [$Xfer+`4*($i%16)`],$Xi - fxors @X[($j+14)%16],@X[$j+1],@X[$j+1]! 0/ 0/ 0:X[1]^=X[14] - srl $a,27,$tmp1 - add $tmp0,$e,$e - fxor @X[($j+2)%16],@X[($j+8)%16],%f18! 1/ 1/ 1:Tmp=X[2,3]^X[8,9] - and $c,$b,$tmp0 - add $tmp1,$e,$e - sll $b,30,$tmp2 - or $c,$b,$tmp1 - fxor %f18,@X[$j],@X[$j] ! 2/ 4/ 3:X[0,1]^=X[2,3]^X[8,9] - srl $b,2,$b - and $d,$tmp1,$tmp1 - add $Xi,$e,$e - or $tmp1,$tmp0,$tmp1 - faligndata @X[$j],@X[$j],%f18 ! 3/ 7/ 5:Tmp=X[0,1]>>>24 - or $tmp2,$b,$b - add $tmp1,$e,$e - fpadd32 @X[$j],@X[$j],@X[$j] ! 4/ 8/ 6:X[0,1]<<=1 -___ -$code.=<<___ if ($i&1); - sll $a,5,$tmp0 !! $i - ld [$Xfer+`4*($i%16)`],$Xi - srl $a,27,$tmp1 - add $tmp0,$e,$e - fmul8ulx16 %f18,$fmul,%f18 ! 5/10/ 7:Tmp>>=7, Tmp&=1 - and $c,$b,$tmp0 - add $tmp1,$e,$e - fpadd32 $K,@X[$l],%f20 ! - sll $b,30,$tmp2 - or $c,$b,$tmp1 - fxors @X[($k+13)%16],@X[$k],@X[$k] !-1/-1/-1:X[0]^=X[13] - srl $b,2,$b - and $d,$tmp1,$tmp1 - fxor %f18,@X[$j],@X[$j] ! 8/14/10:X[0,1]|=Tmp - add $Xi,$e,$e - or $tmp1,$tmp0,$tmp1 - or $tmp2,$b,$b - add $tmp1,$e,$e - std %f20,[$Xfer+`4*$l`] ! -___ -} - -# If there is more data to process, then we pre-fetch the data for -# next iteration in last ten rounds... -sub BODY_70_79 { -my ($i,$a,$b,$c,$d,$e)=@_; -my $j=$i&~1; -my $m=($i%8)*2; - -$j=($j+16)%16; - -$code.=<<___ if ($i==70); - sll $a,5,$tmp0 !! $i - ld [$Xfer+`4*($i%16)`],$Xi - srl $a,27,$tmp1 - add $tmp0,$e,$e - ldd [$inp+64],@X[0] - xor $c,$b,$tmp0 - add $tmp1,$e,$e - sll $b,30,$tmp2 - xor $d,$tmp0,$tmp1 - srl $b,2,$b - add $tmp1,$e,$e - or $tmp2,$b,$b - add $Xi,$e,$e - - and $inp,-64,$nXfer - inc 64,$inp - and $nXfer,255,$nXfer - alignaddr %g0,$align,%g0 - add $base,$nXfer,$nXfer -___ -$code.=<<___ if ($i==71); - sll $a,5,$tmp0 !! $i - ld [$Xfer+`4*($i%16)`],$Xi - srl $a,27,$tmp1 - add $tmp0,$e,$e - xor $c,$b,$tmp0 - add $tmp1,$e,$e - sll $b,30,$tmp2 - xor $d,$tmp0,$tmp1 - srl $b,2,$b - add $tmp1,$e,$e - or $tmp2,$b,$b - add $Xi,$e,$e -___ -$code.=<<___ if ($i>=72); - faligndata @X[$m],@X[$m+2],@X[$m] - sll $a,5,$tmp0 !! $i - ld [$Xfer+`4*($i%16)`],$Xi - srl $a,27,$tmp1 - add $tmp0,$e,$e - xor $c,$b,$tmp0 - add $tmp1,$e,$e - fpadd32 $VK_00_19,@X[$m],%f20 - sll $b,30,$tmp2 - xor $d,$tmp0,$tmp1 - srl $b,2,$b - add $tmp1,$e,$e - or $tmp2,$b,$b - add $Xi,$e,$e -___ -$code.=<<___ if ($i<77); - ldd [$inp+`8*($i+1-70)`],@X[2*($i+1-70)] -___ -$code.=<<___ if ($i==77); # redundant if $inp was aligned - add $align,63,$tmp0 - and $tmp0,-8,$tmp0 - ldd [$inp+$tmp0],@X[16] -___ -$code.=<<___ if ($i>=72); - std %f20,[$nXfer+`4*$m`] -___ -} - -$code.=<<___; -.section ".text",#alloc,#execinstr - -.align 64 -vis_const: -.long 0x5a827999,0x5a827999 ! K_00_19 -.long 0x6ed9eba1,0x6ed9eba1 ! K_20_39 -.long 0x8f1bbcdc,0x8f1bbcdc ! K_40_59 -.long 0xca62c1d6,0xca62c1d6 ! K_60_79 -.long 0x00000100,0x00000100 -.align 64 -.type vis_const,#object -.size vis_const,(.-vis_const) - -.globl sha1_block_data_order -sha1_block_data_order: - save %sp,-$frame,%sp - add %fp,$bias-256,$base - -1: call .+8 - add %o7,vis_const-1b,$tmp0 - - ldd [$tmp0+0],$VK_00_19 - ldd [$tmp0+8],$VK_20_39 - ldd [$tmp0+16],$VK_40_59 - ldd [$tmp0+24],$VK_60_79 - ldd [$tmp0+32],$fmul - - ld [$ctx+0],$Actx - and $base,-256,$base - ld [$ctx+4],$Bctx - sub $base,$bias+$frame,%sp - ld [$ctx+8],$Cctx - and $inp,7,$align - ld [$ctx+12],$Dctx - and $inp,-8,$inp - ld [$ctx+16],$Ectx - - ! X[16] is maintained in FP register bank - alignaddr %g0,$align,%g0 - ldd [$inp+0],@X[0] - sub $inp,-64,$Xfer - ldd [$inp+8],@X[2] - and $Xfer,-64,$Xfer - ldd [$inp+16],@X[4] - and $Xfer,255,$Xfer - ldd [$inp+24],@X[6] - add $base,$Xfer,$Xfer - ldd [$inp+32],@X[8] - ldd [$inp+40],@X[10] - ldd [$inp+48],@X[12] - brz,pt $align,.Laligned - ldd [$inp+56],@X[14] - - ldd [$inp+64],@X[16] - faligndata @X[0],@X[2],@X[0] - faligndata @X[2],@X[4],@X[2] - faligndata @X[4],@X[6],@X[4] - faligndata @X[6],@X[8],@X[6] - faligndata @X[8],@X[10],@X[8] - faligndata @X[10],@X[12],@X[10] - faligndata @X[12],@X[14],@X[12] - faligndata @X[14],@X[16],@X[14] - -.Laligned: - mov 5,$tmp0 - dec 1,$len - alignaddr %g0,$tmp0,%g0 - fpadd32 $VK_00_19,@X[0],%f16 - fpadd32 $VK_00_19,@X[2],%f18 - fpadd32 $VK_00_19,@X[4],%f20 - fpadd32 $VK_00_19,@X[6],%f22 - fpadd32 $VK_00_19,@X[8],%f24 - fpadd32 $VK_00_19,@X[10],%f26 - fpadd32 $VK_00_19,@X[12],%f28 - fpadd32 $VK_00_19,@X[14],%f30 - std %f16,[$Xfer+0] - mov $Actx,$A - std %f18,[$Xfer+8] - mov $Bctx,$B - std %f20,[$Xfer+16] - mov $Cctx,$C - std %f22,[$Xfer+24] - mov $Dctx,$D - std %f24,[$Xfer+32] - mov $Ectx,$E - std %f26,[$Xfer+40] - fxors @X[13],@X[0],@X[0] - std %f28,[$Xfer+48] - ba .Loop - std %f30,[$Xfer+56] -.align 32 -.Loop: -___ -for ($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); } -for (;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } -for (;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } -for (;$i<70;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; - tst $len - bz,pn `$bits==32?"%icc":"%xcc"`,.Ltail - nop -___ -for (;$i<80;$i++) { &BODY_70_79($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; - add $A,$Actx,$Actx - add $B,$Bctx,$Bctx - add $C,$Cctx,$Cctx - add $D,$Dctx,$Dctx - add $E,$Ectx,$Ectx - mov 5,$tmp0 - fxors @X[13],@X[0],@X[0] - mov $Actx,$A - mov $Bctx,$B - mov $Cctx,$C - mov $Dctx,$D - mov $Ectx,$E - alignaddr %g0,$tmp0,%g0 - dec 1,$len - ba .Loop - mov $nXfer,$Xfer - -.align 32 -.Ltail: -___ -for($i=70;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; - add $A,$Actx,$Actx - add $B,$Bctx,$Bctx - add $C,$Cctx,$Cctx - add $D,$Dctx,$Dctx - add $E,$Ectx,$Ectx - - st $Actx,[$ctx+0] - st $Bctx,[$ctx+4] - st $Cctx,[$ctx+8] - st $Dctx,[$ctx+12] - st $Ectx,[$ctx+16] - - ret - restore -.type sha1_block_data_order,#function -.size sha1_block_data_order,(.-sha1_block_data_order) -.asciz "SHA1 block transform for SPARCv9a, CRYPTOGAMS by <appro\@openssl.org>" -.align 4 -___ - -# Purpose of these subroutines is to explicitly encode VIS instructions, -# so that one can compile the module without having to specify VIS -# extentions on compiler command line, e.g. -xarch=v9 vs. -xarch=v9a. -# Idea is to reserve for option to produce "universal" binary and let -# programmer detect if current CPU is VIS capable at run-time. -sub unvis { -my ($mnemonic,$rs1,$rs2,$rd)=@_; -my $ref,$opf; -my %visopf = ( "fmul8ulx16" => 0x037, - "faligndata" => 0x048, - "fpadd32" => 0x052, - "fxor" => 0x06c, - "fxors" => 0x06d ); - - $ref = "$mnemonic\t$rs1,$rs2,$rd"; - - if ($opf=$visopf{$mnemonic}) { - foreach ($rs1,$rs2,$rd) { - return $ref if (!/%f([0-9]{1,2})/); - $_=$1; - if ($1>=32) { - return $ref if ($1&1); - # re-encode for upper double register addressing - $_=($1|$1>>5)&31; - } - } - - return sprintf ".word\t0x%08x !%s", - 0x81b00000|$rd<<25|$rs1<<14|$opf<<5|$rs2, - $ref; - } else { - return $ref; - } -} -sub unalignaddr { -my ($mnemonic,$rs1,$rs2,$rd)=@_; -my %bias = ( "g" => 0, "o" => 8, "l" => 16, "i" => 24 ); -my $ref="$mnemonic\t$rs1,$rs2,$rd"; - - foreach ($rs1,$rs2,$rd) { - if (/%([goli])([0-7])/) { $_=$bias{$1}+$2; } - else { return $ref; } - } - return sprintf ".word\t0x%08x !%s", - 0x81b00300|$rd<<25|$rs1<<14|$rs2, - $ref; -} - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -$code =~ s/\b(f[^\s]*)\s+(%f[0-9]{1,2}),(%f[0-9]{1,2}),(%f[0-9]{1,2})/ - &unvis($1,$2,$3,$4) - /gem; -$code =~ s/\b(alignaddr)\s+(%[goli][0-7]),(%[goli][0-7]),(%[goli][0-7])/ - &unalignaddr($1,$2,$3,$4) - /gem; -print $code; -close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha1-thumb.pl b/app/openssl/crypto/sha/asm/sha1-thumb.pl deleted file mode 100644 index 7c9ea9b0..00000000 --- a/app/openssl/crypto/sha/asm/sha1-thumb.pl +++ /dev/null @@ -1,259 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# sha1_block for Thumb. -# -# January 2007. -# -# The code does not present direct interest to OpenSSL, because of low -# performance. Its purpose is to establish _size_ benchmark. Pretty -# useless one I must say, because 30% or 88 bytes larger ARMv4 code -# [avialable on demand] is almost _twice_ as fast. It should also be -# noted that in-lining of .Lcommon and .Lrotate improves performance -# by over 40%, while code increases by only 10% or 32 bytes. But once -# again, the goal was to establish _size_ benchmark, not performance. - -$output=shift; -open STDOUT,">$output"; - -$inline=0; -#$cheat_on_binutils=1; - -$t0="r0"; -$t1="r1"; -$t2="r2"; -$a="r3"; -$b="r4"; -$c="r5"; -$d="r6"; -$e="r7"; -$K="r8"; # "upper" registers can be used in add/sub and mov insns -$ctx="r9"; -$inp="r10"; -$len="r11"; -$Xi="r12"; - -sub common { -<<___; - sub $t0,#4 - ldr $t1,[$t0] - add $e,$K @ E+=K_xx_xx - lsl $t2,$a,#5 - add $t2,$e - lsr $e,$a,#27 - add $t2,$e @ E+=ROR(A,27) - add $t2,$t1 @ E+=X[i] -___ -} -sub rotate { -<<___; - mov $e,$d @ E=D - mov $d,$c @ D=C - lsl $c,$b,#30 - lsr $b,$b,#2 - orr $c,$b @ C=ROR(B,2) - mov $b,$a @ B=A - add $a,$t2,$t1 @ A=E+F_xx_xx(B,C,D) -___ -} - -sub BODY_00_19 { -$code.=$inline?&common():"\tbl .Lcommon\n"; -$code.=<<___; - mov $t1,$c - eor $t1,$d - and $t1,$b - eor $t1,$d @ F_00_19(B,C,D) -___ -$code.=$inline?&rotate():"\tbl .Lrotate\n"; -} - -sub BODY_20_39 { -$code.=$inline?&common():"\tbl .Lcommon\n"; -$code.=<<___; - mov $t1,$b - eor $t1,$c - eor $t1,$d @ F_20_39(B,C,D) -___ -$code.=$inline?&rotate():"\tbl .Lrotate\n"; -} - -sub BODY_40_59 { -$code.=$inline?&common():"\tbl .Lcommon\n"; -$code.=<<___; - mov $t1,$b - and $t1,$c - mov $e,$b - orr $e,$c - and $e,$d - orr $t1,$e @ F_40_59(B,C,D) -___ -$code.=$inline?&rotate():"\tbl .Lrotate\n"; -} - -$code=<<___; -.text -.code 16 - -.global sha1_block_data_order -.type sha1_block_data_order,%function - -.align 2 -sha1_block_data_order: -___ -if ($cheat_on_binutils) { -$code.=<<___; -.code 32 - add r3,pc,#1 - bx r3 @ switch to Thumb ISA -.code 16 -___ -} -$code.=<<___; - push {r4-r7} - mov r3,r8 - mov r4,r9 - mov r5,r10 - mov r6,r11 - mov r7,r12 - push {r3-r7,lr} - lsl r2,#6 - mov $ctx,r0 @ save context - mov $inp,r1 @ save inp - mov $len,r2 @ save len - add $len,$inp @ $len to point at inp end - -.Lloop: - mov $Xi,sp - mov $t2,sp - sub $t2,#16*4 @ [3] -.LXload: - ldrb $a,[$t1,#0] @ $t1 is r1 and holds inp - ldrb $b,[$t1,#1] - ldrb $c,[$t1,#2] - ldrb $d,[$t1,#3] - lsl $a,#24 - lsl $b,#16 - lsl $c,#8 - orr $a,$b - orr $a,$c - orr $a,$d - add $t1,#4 - push {$a} - cmp sp,$t2 - bne .LXload @ [+14*16] - - mov $inp,$t1 @ update $inp - sub $t2,#32*4 - sub $t2,#32*4 - mov $e,#31 @ [+4] -.LXupdate: - ldr $a,[sp,#15*4] - ldr $b,[sp,#13*4] - ldr $c,[sp,#7*4] - ldr $d,[sp,#2*4] - eor $a,$b - eor $a,$c - eor $a,$d - ror $a,$e - push {$a} - cmp sp,$t2 - bne .LXupdate @ [+(11+1)*64] - - ldmia $t0!,{$a,$b,$c,$d,$e} @ $t0 is r0 and holds ctx - mov $t0,$Xi - - ldr $t2,.LK_00_19 - mov $t1,$t0 - sub $t1,#20*4 - mov $Xi,$t1 - mov $K,$t2 @ [+7+4] -.L_00_19: -___ - &BODY_00_19(); -$code.=<<___; - cmp $Xi,$t0 - bne .L_00_19 @ [+(2+9+4+2+8+2)*20] - - ldr $t2,.LK_20_39 - mov $t1,$t0 - sub $t1,#20*4 - mov $Xi,$t1 - mov $K,$t2 @ [+5] -.L_20_39_or_60_79: -___ - &BODY_20_39(); -$code.=<<___; - cmp $Xi,$t0 - bne .L_20_39_or_60_79 @ [+(2+9+3+2+8+2)*20*2] - cmp sp,$t0 - beq .Ldone @ [+2] - - ldr $t2,.LK_40_59 - mov $t1,$t0 - sub $t1,#20*4 - mov $Xi,$t1 - mov $K,$t2 @ [+5] -.L_40_59: -___ - &BODY_40_59(); -$code.=<<___; - cmp $Xi,$t0 - bne .L_40_59 @ [+(2+9+6+2+8+2)*20] - - ldr $t2,.LK_60_79 - mov $Xi,sp - mov $K,$t2 - b .L_20_39_or_60_79 @ [+4] -.Ldone: - mov $t0,$ctx - ldr $t1,[$t0,#0] - ldr $t2,[$t0,#4] - add $a,$t1 - ldr $t1,[$t0,#8] - add $b,$t2 - ldr $t2,[$t0,#12] - add $c,$t1 - ldr $t1,[$t0,#16] - add $d,$t2 - add $e,$t1 - stmia $t0!,{$a,$b,$c,$d,$e} @ [+20] - - add sp,#80*4 @ deallocate stack frame - mov $t0,$ctx @ restore ctx - mov $t1,$inp @ restore inp - cmp $t1,$len - beq .Lexit - b .Lloop @ [+6] total 3212 cycles -.Lexit: - pop {r2-r7} - mov r8,r2 - mov r9,r3 - mov r10,r4 - mov r11,r5 - mov r12,r6 - mov lr,r7 - pop {r4-r7} - bx lr -.align 2 -___ -$code.=".Lcommon:\n".&common()."\tmov pc,lr\n" if (!$inline); -$code.=".Lrotate:\n".&rotate()."\tmov pc,lr\n" if (!$inline); -$code.=<<___; -.align 2 -.LK_00_19: .word 0x5a827999 -.LK_20_39: .word 0x6ed9eba1 -.LK_40_59: .word 0x8f1bbcdc -.LK_60_79: .word 0xca62c1d6 -.size sha1_block_data_order,.-sha1_block_data_order -.asciz "SHA1 block transform for Thumb, CRYPTOGAMS by <appro\@openssl.org>" -___ - -print $code; -close STDOUT; # enforce flush diff --git a/app/openssl/crypto/sha/asm/sha1-x86_64.pl b/app/openssl/crypto/sha/asm/sha1-x86_64.pl deleted file mode 100755 index 4edc5ea9..00000000 --- a/app/openssl/crypto/sha/asm/sha1-x86_64.pl +++ /dev/null @@ -1,351 +0,0 @@ -#!/usr/bin/env perl -# -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== -# -# sha1_block procedure for x86_64. -# -# It was brought to my attention that on EM64T compiler-generated code -# was far behind 32-bit assembler implementation. This is unlike on -# Opteron where compiler-generated code was only 15% behind 32-bit -# assembler, which originally made it hard to motivate the effort. -# There was suggestion to mechanically translate 32-bit code, but I -# dismissed it, reasoning that x86_64 offers enough register bank -# capacity to fully utilize SHA-1 parallelism. Therefore this fresh -# implementation:-) However! While 64-bit code does performs better -# on Opteron, I failed to beat 32-bit assembler on EM64T core. Well, -# x86_64 does offer larger *addressable* bank, but out-of-order core -# reaches for even more registers through dynamic aliasing, and EM64T -# core must have managed to run-time optimize even 32-bit code just as -# good as 64-bit one. Performance improvement is summarized in the -# following table: -# -# gcc 3.4 32-bit asm cycles/byte -# Opteron +45% +20% 6.8 -# Xeon P4 +65% +0% 9.9 -# Core2 +60% +10% 7.0 - -$flavour = shift; -$output = shift; -if ($flavour =~ /\./) { $output = $flavour; undef $flavour; } - -$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/); - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or -( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or -die "can't locate x86_64-xlate.pl"; - -open STDOUT,"| $^X $xlate $flavour $output"; - -$ctx="%rdi"; # 1st arg -$inp="%rsi"; # 2nd arg -$num="%rdx"; # 3rd arg - -# reassign arguments in order to produce more compact code -$ctx="%r8"; -$inp="%r9"; -$num="%r10"; - -$xi="%eax"; -$t0="%ebx"; -$t1="%ecx"; -$A="%edx"; -$B="%esi"; -$C="%edi"; -$D="%ebp"; -$E="%r11d"; -$T="%r12d"; - -@V=($A,$B,$C,$D,$E,$T); - -sub PROLOGUE { -my $func=shift; -$code.=<<___; -.globl $func -.type $func,\@function,3 -.align 16 -$func: - push %rbx - push %rbp - push %r12 - mov %rsp,%r11 - mov %rdi,$ctx # reassigned argument - sub \$`8+16*4`,%rsp - mov %rsi,$inp # reassigned argument - and \$-64,%rsp - mov %rdx,$num # reassigned argument - mov %r11,`16*4`(%rsp) -.Lprologue: - - mov 0($ctx),$A - mov 4($ctx),$B - mov 8($ctx),$C - mov 12($ctx),$D - mov 16($ctx),$E -___ -} - -sub EPILOGUE { -my $func=shift; -$code.=<<___; - mov `16*4`(%rsp),%rsi - mov (%rsi),%r12 - mov 8(%rsi),%rbp - mov 16(%rsi),%rbx - lea 24(%rsi),%rsp -.Lepilogue: - ret -.size $func,.-$func -___ -} - -sub BODY_00_19 { -my ($i,$a,$b,$c,$d,$e,$f,$host)=@_; -my $j=$i+1; -$code.=<<___ if ($i==0); - mov `4*$i`($inp),$xi - `"bswap $xi" if(!defined($host))` - mov $xi,`4*$i`(%rsp) -___ -$code.=<<___ if ($i<15); - lea 0x5a827999($xi,$e),$f - mov $c,$t0 - mov `4*$j`($inp),$xi - mov $a,$e - xor $d,$t0 - `"bswap $xi" if(!defined($host))` - rol \$5,$e - and $b,$t0 - mov $xi,`4*$j`(%rsp) - add $e,$f - xor $d,$t0 - rol \$30,$b - add $t0,$f -___ -$code.=<<___ if ($i>=15); - lea 0x5a827999($xi,$e),$f - mov `4*($j%16)`(%rsp),$xi - mov $c,$t0 - mov $a,$e - xor `4*(($j+2)%16)`(%rsp),$xi - xor $d,$t0 - rol \$5,$e - xor `4*(($j+8)%16)`(%rsp),$xi - and $b,$t0 - add $e,$f - xor `4*(($j+13)%16)`(%rsp),$xi - xor $d,$t0 - rol \$30,$b - add $t0,$f - rol \$1,$xi - mov $xi,`4*($j%16)`(%rsp) -___ -} - -sub BODY_20_39 { -my ($i,$a,$b,$c,$d,$e,$f)=@_; -my $j=$i+1; -my $K=($i<40)?0x6ed9eba1:0xca62c1d6; -$code.=<<___ if ($i<79); - lea $K($xi,$e),$f - mov `4*($j%16)`(%rsp),$xi - mov $c,$t0 - mov $a,$e - xor `4*(($j+2)%16)`(%rsp),$xi - xor $b,$t0 - rol \$5,$e - xor `4*(($j+8)%16)`(%rsp),$xi - xor $d,$t0 - add $e,$f - xor `4*(($j+13)%16)`(%rsp),$xi - rol \$30,$b - add $t0,$f - rol \$1,$xi -___ -$code.=<<___ if ($i<76); - mov $xi,`4*($j%16)`(%rsp) -___ -$code.=<<___ if ($i==79); - lea $K($xi,$e),$f - mov $c,$t0 - mov $a,$e - xor $b,$t0 - rol \$5,$e - xor $d,$t0 - add $e,$f - rol \$30,$b - add $t0,$f -___ -} - -sub BODY_40_59 { -my ($i,$a,$b,$c,$d,$e,$f)=@_; -my $j=$i+1; -$code.=<<___; - lea 0x8f1bbcdc($xi,$e),$f - mov `4*($j%16)`(%rsp),$xi - mov $b,$t0 - mov $b,$t1 - xor `4*(($j+2)%16)`(%rsp),$xi - mov $a,$e - and $c,$t0 - xor `4*(($j+8)%16)`(%rsp),$xi - or $c,$t1 - rol \$5,$e - xor `4*(($j+13)%16)`(%rsp),$xi - and $d,$t1 - add $e,$f - rol \$1,$xi - or $t1,$t0 - rol \$30,$b - mov $xi,`4*($j%16)`(%rsp) - add $t0,$f -___ -} - -$code=".text\n"; - -&PROLOGUE("sha1_block_data_order"); -$code.=".align 4\n.Lloop:\n"; -for($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); } -for(;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } -for(;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } -for(;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; - add 0($ctx),$E - add 4($ctx),$T - add 8($ctx),$A - add 12($ctx),$B - add 16($ctx),$C - mov $E,0($ctx) - mov $T,4($ctx) - mov $A,8($ctx) - mov $B,12($ctx) - mov $C,16($ctx) - - xchg $E,$A # mov $E,$A - xchg $T,$B # mov $T,$B - xchg $E,$C # mov $A,$C - xchg $T,$D # mov $B,$D - # mov $C,$E - lea `16*4`($inp),$inp - sub \$1,$num - jnz .Lloop -___ -&EPILOGUE("sha1_block_data_order"); -$code.=<<___; -.asciz "SHA1 block transform for x86_64, CRYPTOGAMS by <appro\@openssl.org>" -.align 16 -___ - -# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame, -# CONTEXT *context,DISPATCHER_CONTEXT *disp) -if ($win64) { -$rec="%rcx"; -$frame="%rdx"; -$context="%r8"; -$disp="%r9"; - -$code.=<<___; -.extern __imp_RtlVirtualUnwind -.type se_handler,\@abi-omnipotent -.align 16 -se_handler: - push %rsi - push %rdi - push %rbx - push %rbp - push %r12 - push %r13 - push %r14 - push %r15 - pushfq - sub \$64,%rsp - - mov 120($context),%rax # pull context->Rax - mov 248($context),%rbx # pull context->Rip - - lea .Lprologue(%rip),%r10 - cmp %r10,%rbx # context->Rip<.Lprologue - jb .Lin_prologue - - mov 152($context),%rax # pull context->Rsp - - lea .Lepilogue(%rip),%r10 - cmp %r10,%rbx # context->Rip>=.Lepilogue - jae .Lin_prologue - - mov `16*4`(%rax),%rax # pull saved stack pointer - lea 24(%rax),%rax - - mov -8(%rax),%rbx - mov -16(%rax),%rbp - mov -24(%rax),%r12 - mov %rbx,144($context) # restore context->Rbx - mov %rbp,160($context) # restore context->Rbp - mov %r12,216($context) # restore context->R12 - -.Lin_prologue: - mov 8(%rax),%rdi - mov 16(%rax),%rsi - mov %rax,152($context) # restore context->Rsp - mov %rsi,168($context) # restore context->Rsi - mov %rdi,176($context) # restore context->Rdi - - mov 40($disp),%rdi # disp->ContextRecord - mov $context,%rsi # context - mov \$154,%ecx # sizeof(CONTEXT) - .long 0xa548f3fc # cld; rep movsq - - mov $disp,%rsi - xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER - mov 8(%rsi),%rdx # arg2, disp->ImageBase - mov 0(%rsi),%r8 # arg3, disp->ControlPc - mov 16(%rsi),%r9 # arg4, disp->FunctionEntry - mov 40(%rsi),%r10 # disp->ContextRecord - lea 56(%rsi),%r11 # &disp->HandlerData - lea 24(%rsi),%r12 # &disp->EstablisherFrame - mov %r10,32(%rsp) # arg5 - mov %r11,40(%rsp) # arg6 - mov %r12,48(%rsp) # arg7 - mov %rcx,56(%rsp) # arg8, (NULL) - call *__imp_RtlVirtualUnwind(%rip) - - mov \$1,%eax # ExceptionContinueSearch - add \$64,%rsp - popfq - pop %r15 - pop %r14 - pop %r13 - pop %r12 - pop %rbp - pop %rbx - pop %rdi - pop %rsi - ret -.size se_handler,.-se_handler - -.section .pdata -.align 4 - .rva .LSEH_begin_sha1_block_data_order - .rva .LSEH_end_sha1_block_data_order - .rva .LSEH_info_sha1_block_data_order - -.section .xdata -.align 8 -.LSEH_info_sha1_block_data_order: - .byte 9,0,0,0 - .rva se_handler -___ -} - -#################################################################### - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -print $code; -close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha256-586.pl b/app/openssl/crypto/sha/asm/sha256-586.pl deleted file mode 100644 index ecc8b69c..00000000 --- a/app/openssl/crypto/sha/asm/sha256-586.pl +++ /dev/null @@ -1,251 +0,0 @@ -#!/usr/bin/env perl -# -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== -# -# SHA256 block transform for x86. September 2007. -# -# Performance in clock cycles per processed byte (less is better): -# -# Pentium PIII P4 AMD K8 Core2 -# gcc 46 36 41 27 26 -# icc 57 33 38 25 23 -# x86 asm 40 30 35 20 20 -# x86_64 asm(*) - - 21 15.8 16.5 -# -# (*) x86_64 assembler performance is presented for reference -# purposes. -# -# Performance improvement over compiler generated code varies from -# 10% to 40% [see above]. Not very impressive on some µ-archs, but -# it's 5 times smaller and optimizies amount of writes. - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -push(@INC,"${dir}","${dir}../../perlasm"); -require "x86asm.pl"; - -&asm_init($ARGV[0],"sha512-586.pl",$ARGV[$#ARGV] eq "386"); - -$A="eax"; -$E="edx"; -$T="ebx"; -$Aoff=&DWP(0,"esp"); -$Boff=&DWP(4,"esp"); -$Coff=&DWP(8,"esp"); -$Doff=&DWP(12,"esp"); -$Eoff=&DWP(16,"esp"); -$Foff=&DWP(20,"esp"); -$Goff=&DWP(24,"esp"); -$Hoff=&DWP(28,"esp"); -$Xoff=&DWP(32,"esp"); -$K256="ebp"; - -sub BODY_00_15() { - my $in_16_63=shift; - - &mov ("ecx",$E); - &add ($T,&DWP(4*(8+15+16-9),"esp")) if ($in_16_63); # T += X[-7] - &ror ("ecx",6); - &mov ("edi",$E); - &ror ("edi",11); - &mov ("esi",$Foff); - &xor ("ecx","edi"); - &ror ("edi",25-11); - &mov (&DWP(4*(8+15),"esp"),$T) if ($in_16_63); # save X[0] - &xor ("ecx","edi"); # Sigma1(e) - &mov ("edi",$Goff); - &add ($T,"ecx"); # T += Sigma1(e) - &mov ($Eoff,$E); # modulo-scheduled - - &xor ("esi","edi"); - &mov ("ecx",$A); - &and ("esi",$E); - &mov ($E,$Doff); # e becomes d, which is e in next iteration - &xor ("esi","edi"); # Ch(e,f,g) - &mov ("edi",$A); - &add ($T,"esi"); # T += Ch(e,f,g) - - &ror ("ecx",2); - &add ($T,$Hoff); # T += h - &ror ("edi",13); - &mov ("esi",$Boff); - &xor ("ecx","edi"); - &ror ("edi",22-13); - &add ($E,$T); # d += T - &xor ("ecx","edi"); # Sigma0(a) - &mov ("edi",$Coff); - - &add ($T,"ecx"); # T += Sigma0(a) - &mov ($Aoff,$A); # modulo-scheduled - - &mov ("ecx",$A); - &sub ("esp",4); - &or ($A,"esi"); # a becomes h, which is a in next iteration - &and ("ecx","esi"); - &and ($A,"edi"); - &mov ("esi",&DWP(0,$K256)); - &or ($A,"ecx"); # h=Maj(a,b,c) - - &add ($K256,4); - &add ($A,$T); # h += T - &mov ($T,&DWP(4*(8+15+16-1),"esp")) if ($in_16_63); # preload T - &add ($E,"esi"); # d += K256[i] - &add ($A,"esi"); # h += K256[i] -} - -&function_begin("sha256_block_data_order"); - &mov ("esi",wparam(0)); # ctx - &mov ("edi",wparam(1)); # inp - &mov ("eax",wparam(2)); # num - &mov ("ebx","esp"); # saved sp - - &call (&label("pic_point")); # make it PIC! -&set_label("pic_point"); - &blindpop($K256); - &lea ($K256,&DWP(&label("K256")."-".&label("pic_point"),$K256)); - - &sub ("esp",16); - &and ("esp",-64); - - &shl ("eax",6); - &add ("eax","edi"); - &mov (&DWP(0,"esp"),"esi"); # ctx - &mov (&DWP(4,"esp"),"edi"); # inp - &mov (&DWP(8,"esp"),"eax"); # inp+num*128 - &mov (&DWP(12,"esp"),"ebx"); # saved sp - -&set_label("loop",16); - # copy input block to stack reversing byte and dword order - for($i=0;$i<4;$i++) { - &mov ("eax",&DWP($i*16+0,"edi")); - &mov ("ebx",&DWP($i*16+4,"edi")); - &mov ("ecx",&DWP($i*16+8,"edi")); - &mov ("edx",&DWP($i*16+12,"edi")); - &bswap ("eax"); - &bswap ("ebx"); - &bswap ("ecx"); - &bswap ("edx"); - &push ("eax"); - &push ("ebx"); - &push ("ecx"); - &push ("edx"); - } - &add ("edi",64); - &sub ("esp",4*8); # place for A,B,C,D,E,F,G,H - &mov (&DWP(4*(8+16)+4,"esp"),"edi"); - - # copy ctx->h[0-7] to A,B,C,D,E,F,G,H on stack - &mov ($A,&DWP(0,"esi")); - &mov ("ebx",&DWP(4,"esi")); - &mov ("ecx",&DWP(8,"esi")); - &mov ("edi",&DWP(12,"esi")); - # &mov ($Aoff,$A); - &mov ($Boff,"ebx"); - &mov ($Coff,"ecx"); - &mov ($Doff,"edi"); - &mov ($E,&DWP(16,"esi")); - &mov ("ebx",&DWP(20,"esi")); - &mov ("ecx",&DWP(24,"esi")); - &mov ("edi",&DWP(28,"esi")); - # &mov ($Eoff,$E); - &mov ($Foff,"ebx"); - &mov ($Goff,"ecx"); - &mov ($Hoff,"edi"); - -&set_label("00_15",16); - &mov ($T,&DWP(4*(8+15),"esp")); - - &BODY_00_15(); - - &cmp ("esi",0xc19bf174); - &jne (&label("00_15")); - - &mov ($T,&DWP(4*(8+15+16-1),"esp")); # preloaded in BODY_00_15(1) -&set_label("16_63",16); - &mov ("esi",$T); - &mov ("ecx",&DWP(4*(8+15+16-14),"esp")); - &shr ($T,3); - &ror ("esi",7); - &xor ($T,"esi"); - &ror ("esi",18-7); - &mov ("edi","ecx"); - &xor ($T,"esi"); # T = sigma0(X[-15]) - - &shr ("ecx",10); - &mov ("esi",&DWP(4*(8+15+16),"esp")); - &ror ("edi",17); - &xor ("ecx","edi"); - &ror ("edi",19-17); - &add ($T,"esi"); # T += X[-16] - &xor ("edi","ecx") # sigma1(X[-2]) - - &add ($T,"edi"); # T += sigma1(X[-2]) - # &add ($T,&DWP(4*(8+15+16-9),"esp")); # T += X[-7], moved to BODY_00_15(1) - # &mov (&DWP(4*(8+15),"esp"),$T); # save X[0] - - &BODY_00_15(1); - - &cmp ("esi",0xc67178f2); - &jne (&label("16_63")); - - &mov ("esi",&DWP(4*(8+16+64)+0,"esp"));#ctx - # &mov ($A,$Aoff); - &mov ("ebx",$Boff); - &mov ("ecx",$Coff); - &mov ("edi",$Doff); - &add ($A,&DWP(0,"esi")); - &add ("ebx",&DWP(4,"esi")); - &add ("ecx",&DWP(8,"esi")); - &add ("edi",&DWP(12,"esi")); - &mov (&DWP(0,"esi"),$A); - &mov (&DWP(4,"esi"),"ebx"); - &mov (&DWP(8,"esi"),"ecx"); - &mov (&DWP(12,"esi"),"edi"); - # &mov ($E,$Eoff); - &mov ("eax",$Foff); - &mov ("ebx",$Goff); - &mov ("ecx",$Hoff); - &mov ("edi",&DWP(4*(8+16+64)+4,"esp"));#inp - &add ($E,&DWP(16,"esi")); - &add ("eax",&DWP(20,"esi")); - &add ("ebx",&DWP(24,"esi")); - &add ("ecx",&DWP(28,"esi")); - &mov (&DWP(16,"esi"),$E); - &mov (&DWP(20,"esi"),"eax"); - &mov (&DWP(24,"esi"),"ebx"); - &mov (&DWP(28,"esi"),"ecx"); - - &add ("esp",4*(8+16+64)); # destroy frame - &sub ($K256,4*64); # rewind K - - &cmp ("edi",&DWP(8,"esp")); # are we done yet? - &jb (&label("loop")); - - &mov ("esp",&DWP(12,"esp")); # restore sp -&function_end_A(); - -&set_label("K256",64); # Yes! I keep it in the code segment! - &data_word(0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5); - &data_word(0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5); - &data_word(0xd807aa98,0x12835b01,0x243185be,0x550c7dc3); - &data_word(0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174); - &data_word(0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc); - &data_word(0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da); - &data_word(0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7); - &data_word(0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967); - &data_word(0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13); - &data_word(0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85); - &data_word(0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3); - &data_word(0xd192e819,0xd6990624,0xf40e3585,0x106aa070); - &data_word(0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5); - &data_word(0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3); - &data_word(0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208); - &data_word(0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2); -&function_end_B("sha256_block_data_order"); -&asciz("SHA256 block transform for x86, CRYPTOGAMS by <appro\@openssl.org>"); - -&asm_finish(); diff --git a/app/openssl/crypto/sha/asm/sha256-armv4.pl b/app/openssl/crypto/sha/asm/sha256-armv4.pl deleted file mode 100644 index 492cb62b..00000000 --- a/app/openssl/crypto/sha/asm/sha256-armv4.pl +++ /dev/null @@ -1,186 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# SHA256 block procedure for ARMv4. May 2007. - -# Performance is ~2x better than gcc 3.4 generated code and in "abso- -# lute" terms is ~2250 cycles per 64-byte block or ~35 cycles per -# byte [on single-issue Xscale PXA250 core]. - -# July 2010. -# -# Rescheduling for dual-issue pipeline resulted in 22% improvement on -# Cortex A8 core and ~20 cycles per processed byte. - -while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {} -open STDOUT,">$output"; - -$ctx="r0"; $t0="r0"; -$inp="r1"; -$len="r2"; $t1="r2"; -$T1="r3"; -$A="r4"; -$B="r5"; -$C="r6"; -$D="r7"; -$E="r8"; -$F="r9"; -$G="r10"; -$H="r11"; -@V=($A,$B,$C,$D,$E,$F,$G,$H); -$t2="r12"; -$Ktbl="r14"; - -@Sigma0=( 2,13,22); -@Sigma1=( 6,11,25); -@sigma0=( 7,18, 3); -@sigma1=(17,19,10); - -sub BODY_00_15 { -my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; - -$code.=<<___ if ($i<16); - ldrb $T1,[$inp,#3] @ $i - ldrb $t2,[$inp,#2] - ldrb $t1,[$inp,#1] - ldrb $t0,[$inp],#4 - orr $T1,$T1,$t2,lsl#8 - orr $T1,$T1,$t1,lsl#16 - orr $T1,$T1,$t0,lsl#24 - `"str $inp,[sp,#17*4]" if ($i==15)` -___ -$code.=<<___; - ldr $t2,[$Ktbl],#4 @ *K256++ - mov $t0,$e,ror#$Sigma1[0] - str $T1,[sp,#`$i%16`*4] - eor $t0,$t0,$e,ror#$Sigma1[1] - eor $t1,$f,$g - eor $t0,$t0,$e,ror#$Sigma1[2] @ Sigma1(e) - and $t1,$t1,$e - add $T1,$T1,$t0 - eor $t1,$t1,$g @ Ch(e,f,g) - add $T1,$T1,$h - mov $h,$a,ror#$Sigma0[0] - add $T1,$T1,$t1 - eor $h,$h,$a,ror#$Sigma0[1] - add $T1,$T1,$t2 - eor $h,$h,$a,ror#$Sigma0[2] @ Sigma0(a) - orr $t0,$a,$b - and $t1,$a,$b - and $t0,$t0,$c - add $h,$h,$T1 - orr $t0,$t0,$t1 @ Maj(a,b,c) - add $d,$d,$T1 - add $h,$h,$t0 -___ -} - -sub BODY_16_XX { -my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; - -$code.=<<___; - ldr $t1,[sp,#`($i+1)%16`*4] @ $i - ldr $t2,[sp,#`($i+14)%16`*4] - ldr $T1,[sp,#`($i+0)%16`*4] - mov $t0,$t1,ror#$sigma0[0] - ldr $inp,[sp,#`($i+9)%16`*4] - eor $t0,$t0,$t1,ror#$sigma0[1] - eor $t0,$t0,$t1,lsr#$sigma0[2] @ sigma0(X[i+1]) - mov $t1,$t2,ror#$sigma1[0] - add $T1,$T1,$t0 - eor $t1,$t1,$t2,ror#$sigma1[1] - add $T1,$T1,$inp - eor $t1,$t1,$t2,lsr#$sigma1[2] @ sigma1(X[i+14]) - add $T1,$T1,$t1 -___ - &BODY_00_15(@_); -} - -$code=<<___; -.text -.code 32 - -.type K256,%object -.align 5 -K256: -.word 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 -.word 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 -.word 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 -.word 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 -.word 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc -.word 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da -.word 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 -.word 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 -.word 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 -.word 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 -.word 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 -.word 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 -.word 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 -.word 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 -.word 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 -.word 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 -.size K256,.-K256 - -.global sha256_block_data_order -.type sha256_block_data_order,%function -sha256_block_data_order: - sub r3,pc,#8 @ sha256_block_data_order - add $len,$inp,$len,lsl#6 @ len to point at the end of inp - stmdb sp!,{$ctx,$inp,$len,r4-r12,lr} - ldmia $ctx,{$A,$B,$C,$D,$E,$F,$G,$H} - sub $Ktbl,r3,#256 @ K256 - sub sp,sp,#16*4 @ alloca(X[16]) -.Loop: -___ -for($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } -$code.=".Lrounds_16_xx:\n"; -for (;$i<32;$i++) { &BODY_16_XX($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; - and $t2,$t2,#0xff - cmp $t2,#0xf2 - bne .Lrounds_16_xx - - ldr $T1,[sp,#16*4] @ pull ctx - ldr $t0,[$T1,#0] - ldr $t1,[$T1,#4] - ldr $t2,[$T1,#8] - add $A,$A,$t0 - ldr $t0,[$T1,#12] - add $B,$B,$t1 - ldr $t1,[$T1,#16] - add $C,$C,$t2 - ldr $t2,[$T1,#20] - add $D,$D,$t0 - ldr $t0,[$T1,#24] - add $E,$E,$t1 - ldr $t1,[$T1,#28] - add $F,$F,$t2 - ldr $inp,[sp,#17*4] @ pull inp - ldr $t2,[sp,#18*4] @ pull inp+len - add $G,$G,$t0 - add $H,$H,$t1 - stmia $T1,{$A,$B,$C,$D,$E,$F,$G,$H} - cmp $inp,$t2 - sub $Ktbl,$Ktbl,#256 @ rewind Ktbl - bne .Loop - - add sp,sp,#`16+3`*4 @ destroy frame - ldmia sp!,{r4-r12,lr} - tst lr,#1 - moveq pc,lr @ be binary compatible with V4, yet - bx lr @ interoperable with Thumb ISA:-) -.size sha256_block_data_order,.-sha256_block_data_order -.asciz "SHA256 block transform for ARMv4, CRYPTOGAMS by <appro\@openssl.org>" -.align 2 -___ - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm; # make it possible to compile with -march=armv4 -print $code; -close STDOUT; # enforce flush diff --git a/app/openssl/crypto/sha/asm/sha256-armv4.s b/app/openssl/crypto/sha/asm/sha256-armv4.s deleted file mode 100644 index ee903dc4..00000000 --- a/app/openssl/crypto/sha/asm/sha256-armv4.s +++ /dev/null @@ -1,1111 +0,0 @@ -.text -.code 32 - -.type K256,%object -.align 5 -K256: -.word 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 -.word 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 -.word 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 -.word 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 -.word 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc -.word 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da -.word 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 -.word 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 -.word 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 -.word 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 -.word 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 -.word 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 -.word 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 -.word 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 -.word 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 -.word 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 -.size K256,.-K256 - -.global sha256_block_data_order -.type sha256_block_data_order,%function -sha256_block_data_order: - sub r3,pc,#8 @ sha256_block_data_order - add r2,r1,r2,lsl#6 @ len to point at the end of inp - stmdb sp!,{r0,r1,r2,r4-r12,lr} - ldmia r0,{r4,r5,r6,r7,r8,r9,r10,r11} - sub r14,r3,#256 @ K256 - sub sp,sp,#16*4 @ alloca(X[16]) -.Loop: - ldrb r3,[r1,#3] @ 0 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r8,ror#6 - str r3,[sp,#0*4] - eor r0,r0,r8,ror#11 - eor r2,r9,r10 - eor r0,r0,r8,ror#25 @ Sigma1(e) - and r2,r2,r8 - add r3,r3,r0 - eor r2,r2,r10 @ Ch(e,f,g) - add r3,r3,r11 - mov r11,r4,ror#2 - add r3,r3,r2 - eor r11,r11,r4,ror#13 - add r3,r3,r12 - eor r11,r11,r4,ror#22 @ Sigma0(a) - orr r0,r4,r5 - and r2,r4,r5 - and r0,r0,r6 - add r11,r11,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r7,r7,r3 - add r11,r11,r0 - ldrb r3,[r1,#3] @ 1 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r7,ror#6 - str r3,[sp,#1*4] - eor r0,r0,r7,ror#11 - eor r2,r8,r9 - eor r0,r0,r7,ror#25 @ Sigma1(e) - and r2,r2,r7 - add r3,r3,r0 - eor r2,r2,r9 @ Ch(e,f,g) - add r3,r3,r10 - mov r10,r11,ror#2 - add r3,r3,r2 - eor r10,r10,r11,ror#13 - add r3,r3,r12 - eor r10,r10,r11,ror#22 @ Sigma0(a) - orr r0,r11,r4 - and r2,r11,r4 - and r0,r0,r5 - add r10,r10,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r6,r6,r3 - add r10,r10,r0 - ldrb r3,[r1,#3] @ 2 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r6,ror#6 - str r3,[sp,#2*4] - eor r0,r0,r6,ror#11 - eor r2,r7,r8 - eor r0,r0,r6,ror#25 @ Sigma1(e) - and r2,r2,r6 - add r3,r3,r0 - eor r2,r2,r8 @ Ch(e,f,g) - add r3,r3,r9 - mov r9,r10,ror#2 - add r3,r3,r2 - eor r9,r9,r10,ror#13 - add r3,r3,r12 - eor r9,r9,r10,ror#22 @ Sigma0(a) - orr r0,r10,r11 - and r2,r10,r11 - and r0,r0,r4 - add r9,r9,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r5,r5,r3 - add r9,r9,r0 - ldrb r3,[r1,#3] @ 3 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r5,ror#6 - str r3,[sp,#3*4] - eor r0,r0,r5,ror#11 - eor r2,r6,r7 - eor r0,r0,r5,ror#25 @ Sigma1(e) - and r2,r2,r5 - add r3,r3,r0 - eor r2,r2,r7 @ Ch(e,f,g) - add r3,r3,r8 - mov r8,r9,ror#2 - add r3,r3,r2 - eor r8,r8,r9,ror#13 - add r3,r3,r12 - eor r8,r8,r9,ror#22 @ Sigma0(a) - orr r0,r9,r10 - and r2,r9,r10 - and r0,r0,r11 - add r8,r8,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r4,r4,r3 - add r8,r8,r0 - ldrb r3,[r1,#3] @ 4 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r4,ror#6 - str r3,[sp,#4*4] - eor r0,r0,r4,ror#11 - eor r2,r5,r6 - eor r0,r0,r4,ror#25 @ Sigma1(e) - and r2,r2,r4 - add r3,r3,r0 - eor r2,r2,r6 @ Ch(e,f,g) - add r3,r3,r7 - mov r7,r8,ror#2 - add r3,r3,r2 - eor r7,r7,r8,ror#13 - add r3,r3,r12 - eor r7,r7,r8,ror#22 @ Sigma0(a) - orr r0,r8,r9 - and r2,r8,r9 - and r0,r0,r10 - add r7,r7,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r11,r11,r3 - add r7,r7,r0 - ldrb r3,[r1,#3] @ 5 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r11,ror#6 - str r3,[sp,#5*4] - eor r0,r0,r11,ror#11 - eor r2,r4,r5 - eor r0,r0,r11,ror#25 @ Sigma1(e) - and r2,r2,r11 - add r3,r3,r0 - eor r2,r2,r5 @ Ch(e,f,g) - add r3,r3,r6 - mov r6,r7,ror#2 - add r3,r3,r2 - eor r6,r6,r7,ror#13 - add r3,r3,r12 - eor r6,r6,r7,ror#22 @ Sigma0(a) - orr r0,r7,r8 - and r2,r7,r8 - and r0,r0,r9 - add r6,r6,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r10,r10,r3 - add r6,r6,r0 - ldrb r3,[r1,#3] @ 6 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r10,ror#6 - str r3,[sp,#6*4] - eor r0,r0,r10,ror#11 - eor r2,r11,r4 - eor r0,r0,r10,ror#25 @ Sigma1(e) - and r2,r2,r10 - add r3,r3,r0 - eor r2,r2,r4 @ Ch(e,f,g) - add r3,r3,r5 - mov r5,r6,ror#2 - add r3,r3,r2 - eor r5,r5,r6,ror#13 - add r3,r3,r12 - eor r5,r5,r6,ror#22 @ Sigma0(a) - orr r0,r6,r7 - and r2,r6,r7 - and r0,r0,r8 - add r5,r5,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r9,r9,r3 - add r5,r5,r0 - ldrb r3,[r1,#3] @ 7 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r9,ror#6 - str r3,[sp,#7*4] - eor r0,r0,r9,ror#11 - eor r2,r10,r11 - eor r0,r0,r9,ror#25 @ Sigma1(e) - and r2,r2,r9 - add r3,r3,r0 - eor r2,r2,r11 @ Ch(e,f,g) - add r3,r3,r4 - mov r4,r5,ror#2 - add r3,r3,r2 - eor r4,r4,r5,ror#13 - add r3,r3,r12 - eor r4,r4,r5,ror#22 @ Sigma0(a) - orr r0,r5,r6 - and r2,r5,r6 - and r0,r0,r7 - add r4,r4,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r8,r8,r3 - add r4,r4,r0 - ldrb r3,[r1,#3] @ 8 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r8,ror#6 - str r3,[sp,#8*4] - eor r0,r0,r8,ror#11 - eor r2,r9,r10 - eor r0,r0,r8,ror#25 @ Sigma1(e) - and r2,r2,r8 - add r3,r3,r0 - eor r2,r2,r10 @ Ch(e,f,g) - add r3,r3,r11 - mov r11,r4,ror#2 - add r3,r3,r2 - eor r11,r11,r4,ror#13 - add r3,r3,r12 - eor r11,r11,r4,ror#22 @ Sigma0(a) - orr r0,r4,r5 - and r2,r4,r5 - and r0,r0,r6 - add r11,r11,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r7,r7,r3 - add r11,r11,r0 - ldrb r3,[r1,#3] @ 9 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r7,ror#6 - str r3,[sp,#9*4] - eor r0,r0,r7,ror#11 - eor r2,r8,r9 - eor r0,r0,r7,ror#25 @ Sigma1(e) - and r2,r2,r7 - add r3,r3,r0 - eor r2,r2,r9 @ Ch(e,f,g) - add r3,r3,r10 - mov r10,r11,ror#2 - add r3,r3,r2 - eor r10,r10,r11,ror#13 - add r3,r3,r12 - eor r10,r10,r11,ror#22 @ Sigma0(a) - orr r0,r11,r4 - and r2,r11,r4 - and r0,r0,r5 - add r10,r10,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r6,r6,r3 - add r10,r10,r0 - ldrb r3,[r1,#3] @ 10 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r6,ror#6 - str r3,[sp,#10*4] - eor r0,r0,r6,ror#11 - eor r2,r7,r8 - eor r0,r0,r6,ror#25 @ Sigma1(e) - and r2,r2,r6 - add r3,r3,r0 - eor r2,r2,r8 @ Ch(e,f,g) - add r3,r3,r9 - mov r9,r10,ror#2 - add r3,r3,r2 - eor r9,r9,r10,ror#13 - add r3,r3,r12 - eor r9,r9,r10,ror#22 @ Sigma0(a) - orr r0,r10,r11 - and r2,r10,r11 - and r0,r0,r4 - add r9,r9,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r5,r5,r3 - add r9,r9,r0 - ldrb r3,[r1,#3] @ 11 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r5,ror#6 - str r3,[sp,#11*4] - eor r0,r0,r5,ror#11 - eor r2,r6,r7 - eor r0,r0,r5,ror#25 @ Sigma1(e) - and r2,r2,r5 - add r3,r3,r0 - eor r2,r2,r7 @ Ch(e,f,g) - add r3,r3,r8 - mov r8,r9,ror#2 - add r3,r3,r2 - eor r8,r8,r9,ror#13 - add r3,r3,r12 - eor r8,r8,r9,ror#22 @ Sigma0(a) - orr r0,r9,r10 - and r2,r9,r10 - and r0,r0,r11 - add r8,r8,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r4,r4,r3 - add r8,r8,r0 - ldrb r3,[r1,#3] @ 12 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r4,ror#6 - str r3,[sp,#12*4] - eor r0,r0,r4,ror#11 - eor r2,r5,r6 - eor r0,r0,r4,ror#25 @ Sigma1(e) - and r2,r2,r4 - add r3,r3,r0 - eor r2,r2,r6 @ Ch(e,f,g) - add r3,r3,r7 - mov r7,r8,ror#2 - add r3,r3,r2 - eor r7,r7,r8,ror#13 - add r3,r3,r12 - eor r7,r7,r8,ror#22 @ Sigma0(a) - orr r0,r8,r9 - and r2,r8,r9 - and r0,r0,r10 - add r7,r7,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r11,r11,r3 - add r7,r7,r0 - ldrb r3,[r1,#3] @ 13 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r11,ror#6 - str r3,[sp,#13*4] - eor r0,r0,r11,ror#11 - eor r2,r4,r5 - eor r0,r0,r11,ror#25 @ Sigma1(e) - and r2,r2,r11 - add r3,r3,r0 - eor r2,r2,r5 @ Ch(e,f,g) - add r3,r3,r6 - mov r6,r7,ror#2 - add r3,r3,r2 - eor r6,r6,r7,ror#13 - add r3,r3,r12 - eor r6,r6,r7,ror#22 @ Sigma0(a) - orr r0,r7,r8 - and r2,r7,r8 - and r0,r0,r9 - add r6,r6,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r10,r10,r3 - add r6,r6,r0 - ldrb r3,[r1,#3] @ 14 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - - ldr r12,[r14],#4 @ *K256++ - mov r0,r10,ror#6 - str r3,[sp,#14*4] - eor r0,r0,r10,ror#11 - eor r2,r11,r4 - eor r0,r0,r10,ror#25 @ Sigma1(e) - and r2,r2,r10 - add r3,r3,r0 - eor r2,r2,r4 @ Ch(e,f,g) - add r3,r3,r5 - mov r5,r6,ror#2 - add r3,r3,r2 - eor r5,r5,r6,ror#13 - add r3,r3,r12 - eor r5,r5,r6,ror#22 @ Sigma0(a) - orr r0,r6,r7 - and r2,r6,r7 - and r0,r0,r8 - add r5,r5,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r9,r9,r3 - add r5,r5,r0 - ldrb r3,[r1,#3] @ 15 - ldrb r12,[r1,#2] - ldrb r2,[r1,#1] - ldrb r0,[r1],#4 - orr r3,r3,r12,lsl#8 - orr r3,r3,r2,lsl#16 - orr r3,r3,r0,lsl#24 - str r1,[sp,#17*4] - ldr r12,[r14],#4 @ *K256++ - mov r0,r9,ror#6 - str r3,[sp,#15*4] - eor r0,r0,r9,ror#11 - eor r2,r10,r11 - eor r0,r0,r9,ror#25 @ Sigma1(e) - and r2,r2,r9 - add r3,r3,r0 - eor r2,r2,r11 @ Ch(e,f,g) - add r3,r3,r4 - mov r4,r5,ror#2 - add r3,r3,r2 - eor r4,r4,r5,ror#13 - add r3,r3,r12 - eor r4,r4,r5,ror#22 @ Sigma0(a) - orr r0,r5,r6 - and r2,r5,r6 - and r0,r0,r7 - add r4,r4,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r8,r8,r3 - add r4,r4,r0 -.Lrounds_16_xx: - ldr r2,[sp,#1*4] @ 16 - ldr r12,[sp,#14*4] - ldr r3,[sp,#0*4] - mov r0,r2,ror#7 - ldr r1,[sp,#9*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r8,ror#6 - str r3,[sp,#0*4] - eor r0,r0,r8,ror#11 - eor r2,r9,r10 - eor r0,r0,r8,ror#25 @ Sigma1(e) - and r2,r2,r8 - add r3,r3,r0 - eor r2,r2,r10 @ Ch(e,f,g) - add r3,r3,r11 - mov r11,r4,ror#2 - add r3,r3,r2 - eor r11,r11,r4,ror#13 - add r3,r3,r12 - eor r11,r11,r4,ror#22 @ Sigma0(a) - orr r0,r4,r5 - and r2,r4,r5 - and r0,r0,r6 - add r11,r11,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r7,r7,r3 - add r11,r11,r0 - ldr r2,[sp,#2*4] @ 17 - ldr r12,[sp,#15*4] - ldr r3,[sp,#1*4] - mov r0,r2,ror#7 - ldr r1,[sp,#10*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r7,ror#6 - str r3,[sp,#1*4] - eor r0,r0,r7,ror#11 - eor r2,r8,r9 - eor r0,r0,r7,ror#25 @ Sigma1(e) - and r2,r2,r7 - add r3,r3,r0 - eor r2,r2,r9 @ Ch(e,f,g) - add r3,r3,r10 - mov r10,r11,ror#2 - add r3,r3,r2 - eor r10,r10,r11,ror#13 - add r3,r3,r12 - eor r10,r10,r11,ror#22 @ Sigma0(a) - orr r0,r11,r4 - and r2,r11,r4 - and r0,r0,r5 - add r10,r10,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r6,r6,r3 - add r10,r10,r0 - ldr r2,[sp,#3*4] @ 18 - ldr r12,[sp,#0*4] - ldr r3,[sp,#2*4] - mov r0,r2,ror#7 - ldr r1,[sp,#11*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r6,ror#6 - str r3,[sp,#2*4] - eor r0,r0,r6,ror#11 - eor r2,r7,r8 - eor r0,r0,r6,ror#25 @ Sigma1(e) - and r2,r2,r6 - add r3,r3,r0 - eor r2,r2,r8 @ Ch(e,f,g) - add r3,r3,r9 - mov r9,r10,ror#2 - add r3,r3,r2 - eor r9,r9,r10,ror#13 - add r3,r3,r12 - eor r9,r9,r10,ror#22 @ Sigma0(a) - orr r0,r10,r11 - and r2,r10,r11 - and r0,r0,r4 - add r9,r9,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r5,r5,r3 - add r9,r9,r0 - ldr r2,[sp,#4*4] @ 19 - ldr r12,[sp,#1*4] - ldr r3,[sp,#3*4] - mov r0,r2,ror#7 - ldr r1,[sp,#12*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r5,ror#6 - str r3,[sp,#3*4] - eor r0,r0,r5,ror#11 - eor r2,r6,r7 - eor r0,r0,r5,ror#25 @ Sigma1(e) - and r2,r2,r5 - add r3,r3,r0 - eor r2,r2,r7 @ Ch(e,f,g) - add r3,r3,r8 - mov r8,r9,ror#2 - add r3,r3,r2 - eor r8,r8,r9,ror#13 - add r3,r3,r12 - eor r8,r8,r9,ror#22 @ Sigma0(a) - orr r0,r9,r10 - and r2,r9,r10 - and r0,r0,r11 - add r8,r8,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r4,r4,r3 - add r8,r8,r0 - ldr r2,[sp,#5*4] @ 20 - ldr r12,[sp,#2*4] - ldr r3,[sp,#4*4] - mov r0,r2,ror#7 - ldr r1,[sp,#13*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r4,ror#6 - str r3,[sp,#4*4] - eor r0,r0,r4,ror#11 - eor r2,r5,r6 - eor r0,r0,r4,ror#25 @ Sigma1(e) - and r2,r2,r4 - add r3,r3,r0 - eor r2,r2,r6 @ Ch(e,f,g) - add r3,r3,r7 - mov r7,r8,ror#2 - add r3,r3,r2 - eor r7,r7,r8,ror#13 - add r3,r3,r12 - eor r7,r7,r8,ror#22 @ Sigma0(a) - orr r0,r8,r9 - and r2,r8,r9 - and r0,r0,r10 - add r7,r7,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r11,r11,r3 - add r7,r7,r0 - ldr r2,[sp,#6*4] @ 21 - ldr r12,[sp,#3*4] - ldr r3,[sp,#5*4] - mov r0,r2,ror#7 - ldr r1,[sp,#14*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r11,ror#6 - str r3,[sp,#5*4] - eor r0,r0,r11,ror#11 - eor r2,r4,r5 - eor r0,r0,r11,ror#25 @ Sigma1(e) - and r2,r2,r11 - add r3,r3,r0 - eor r2,r2,r5 @ Ch(e,f,g) - add r3,r3,r6 - mov r6,r7,ror#2 - add r3,r3,r2 - eor r6,r6,r7,ror#13 - add r3,r3,r12 - eor r6,r6,r7,ror#22 @ Sigma0(a) - orr r0,r7,r8 - and r2,r7,r8 - and r0,r0,r9 - add r6,r6,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r10,r10,r3 - add r6,r6,r0 - ldr r2,[sp,#7*4] @ 22 - ldr r12,[sp,#4*4] - ldr r3,[sp,#6*4] - mov r0,r2,ror#7 - ldr r1,[sp,#15*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r10,ror#6 - str r3,[sp,#6*4] - eor r0,r0,r10,ror#11 - eor r2,r11,r4 - eor r0,r0,r10,ror#25 @ Sigma1(e) - and r2,r2,r10 - add r3,r3,r0 - eor r2,r2,r4 @ Ch(e,f,g) - add r3,r3,r5 - mov r5,r6,ror#2 - add r3,r3,r2 - eor r5,r5,r6,ror#13 - add r3,r3,r12 - eor r5,r5,r6,ror#22 @ Sigma0(a) - orr r0,r6,r7 - and r2,r6,r7 - and r0,r0,r8 - add r5,r5,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r9,r9,r3 - add r5,r5,r0 - ldr r2,[sp,#8*4] @ 23 - ldr r12,[sp,#5*4] - ldr r3,[sp,#7*4] - mov r0,r2,ror#7 - ldr r1,[sp,#0*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r9,ror#6 - str r3,[sp,#7*4] - eor r0,r0,r9,ror#11 - eor r2,r10,r11 - eor r0,r0,r9,ror#25 @ Sigma1(e) - and r2,r2,r9 - add r3,r3,r0 - eor r2,r2,r11 @ Ch(e,f,g) - add r3,r3,r4 - mov r4,r5,ror#2 - add r3,r3,r2 - eor r4,r4,r5,ror#13 - add r3,r3,r12 - eor r4,r4,r5,ror#22 @ Sigma0(a) - orr r0,r5,r6 - and r2,r5,r6 - and r0,r0,r7 - add r4,r4,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r8,r8,r3 - add r4,r4,r0 - ldr r2,[sp,#9*4] @ 24 - ldr r12,[sp,#6*4] - ldr r3,[sp,#8*4] - mov r0,r2,ror#7 - ldr r1,[sp,#1*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r8,ror#6 - str r3,[sp,#8*4] - eor r0,r0,r8,ror#11 - eor r2,r9,r10 - eor r0,r0,r8,ror#25 @ Sigma1(e) - and r2,r2,r8 - add r3,r3,r0 - eor r2,r2,r10 @ Ch(e,f,g) - add r3,r3,r11 - mov r11,r4,ror#2 - add r3,r3,r2 - eor r11,r11,r4,ror#13 - add r3,r3,r12 - eor r11,r11,r4,ror#22 @ Sigma0(a) - orr r0,r4,r5 - and r2,r4,r5 - and r0,r0,r6 - add r11,r11,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r7,r7,r3 - add r11,r11,r0 - ldr r2,[sp,#10*4] @ 25 - ldr r12,[sp,#7*4] - ldr r3,[sp,#9*4] - mov r0,r2,ror#7 - ldr r1,[sp,#2*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r7,ror#6 - str r3,[sp,#9*4] - eor r0,r0,r7,ror#11 - eor r2,r8,r9 - eor r0,r0,r7,ror#25 @ Sigma1(e) - and r2,r2,r7 - add r3,r3,r0 - eor r2,r2,r9 @ Ch(e,f,g) - add r3,r3,r10 - mov r10,r11,ror#2 - add r3,r3,r2 - eor r10,r10,r11,ror#13 - add r3,r3,r12 - eor r10,r10,r11,ror#22 @ Sigma0(a) - orr r0,r11,r4 - and r2,r11,r4 - and r0,r0,r5 - add r10,r10,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r6,r6,r3 - add r10,r10,r0 - ldr r2,[sp,#11*4] @ 26 - ldr r12,[sp,#8*4] - ldr r3,[sp,#10*4] - mov r0,r2,ror#7 - ldr r1,[sp,#3*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r6,ror#6 - str r3,[sp,#10*4] - eor r0,r0,r6,ror#11 - eor r2,r7,r8 - eor r0,r0,r6,ror#25 @ Sigma1(e) - and r2,r2,r6 - add r3,r3,r0 - eor r2,r2,r8 @ Ch(e,f,g) - add r3,r3,r9 - mov r9,r10,ror#2 - add r3,r3,r2 - eor r9,r9,r10,ror#13 - add r3,r3,r12 - eor r9,r9,r10,ror#22 @ Sigma0(a) - orr r0,r10,r11 - and r2,r10,r11 - and r0,r0,r4 - add r9,r9,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r5,r5,r3 - add r9,r9,r0 - ldr r2,[sp,#12*4] @ 27 - ldr r12,[sp,#9*4] - ldr r3,[sp,#11*4] - mov r0,r2,ror#7 - ldr r1,[sp,#4*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r5,ror#6 - str r3,[sp,#11*4] - eor r0,r0,r5,ror#11 - eor r2,r6,r7 - eor r0,r0,r5,ror#25 @ Sigma1(e) - and r2,r2,r5 - add r3,r3,r0 - eor r2,r2,r7 @ Ch(e,f,g) - add r3,r3,r8 - mov r8,r9,ror#2 - add r3,r3,r2 - eor r8,r8,r9,ror#13 - add r3,r3,r12 - eor r8,r8,r9,ror#22 @ Sigma0(a) - orr r0,r9,r10 - and r2,r9,r10 - and r0,r0,r11 - add r8,r8,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r4,r4,r3 - add r8,r8,r0 - ldr r2,[sp,#13*4] @ 28 - ldr r12,[sp,#10*4] - ldr r3,[sp,#12*4] - mov r0,r2,ror#7 - ldr r1,[sp,#5*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r4,ror#6 - str r3,[sp,#12*4] - eor r0,r0,r4,ror#11 - eor r2,r5,r6 - eor r0,r0,r4,ror#25 @ Sigma1(e) - and r2,r2,r4 - add r3,r3,r0 - eor r2,r2,r6 @ Ch(e,f,g) - add r3,r3,r7 - mov r7,r8,ror#2 - add r3,r3,r2 - eor r7,r7,r8,ror#13 - add r3,r3,r12 - eor r7,r7,r8,ror#22 @ Sigma0(a) - orr r0,r8,r9 - and r2,r8,r9 - and r0,r0,r10 - add r7,r7,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r11,r11,r3 - add r7,r7,r0 - ldr r2,[sp,#14*4] @ 29 - ldr r12,[sp,#11*4] - ldr r3,[sp,#13*4] - mov r0,r2,ror#7 - ldr r1,[sp,#6*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r11,ror#6 - str r3,[sp,#13*4] - eor r0,r0,r11,ror#11 - eor r2,r4,r5 - eor r0,r0,r11,ror#25 @ Sigma1(e) - and r2,r2,r11 - add r3,r3,r0 - eor r2,r2,r5 @ Ch(e,f,g) - add r3,r3,r6 - mov r6,r7,ror#2 - add r3,r3,r2 - eor r6,r6,r7,ror#13 - add r3,r3,r12 - eor r6,r6,r7,ror#22 @ Sigma0(a) - orr r0,r7,r8 - and r2,r7,r8 - and r0,r0,r9 - add r6,r6,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r10,r10,r3 - add r6,r6,r0 - ldr r2,[sp,#15*4] @ 30 - ldr r12,[sp,#12*4] - ldr r3,[sp,#14*4] - mov r0,r2,ror#7 - ldr r1,[sp,#7*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r10,ror#6 - str r3,[sp,#14*4] - eor r0,r0,r10,ror#11 - eor r2,r11,r4 - eor r0,r0,r10,ror#25 @ Sigma1(e) - and r2,r2,r10 - add r3,r3,r0 - eor r2,r2,r4 @ Ch(e,f,g) - add r3,r3,r5 - mov r5,r6,ror#2 - add r3,r3,r2 - eor r5,r5,r6,ror#13 - add r3,r3,r12 - eor r5,r5,r6,ror#22 @ Sigma0(a) - orr r0,r6,r7 - and r2,r6,r7 - and r0,r0,r8 - add r5,r5,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r9,r9,r3 - add r5,r5,r0 - ldr r2,[sp,#0*4] @ 31 - ldr r12,[sp,#13*4] - ldr r3,[sp,#15*4] - mov r0,r2,ror#7 - ldr r1,[sp,#8*4] - eor r0,r0,r2,ror#18 - eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) - mov r2,r12,ror#17 - add r3,r3,r0 - eor r2,r2,r12,ror#19 - add r3,r3,r1 - eor r2,r2,r12,lsr#10 @ sigma1(X[i+14]) - add r3,r3,r2 - ldr r12,[r14],#4 @ *K256++ - mov r0,r9,ror#6 - str r3,[sp,#15*4] - eor r0,r0,r9,ror#11 - eor r2,r10,r11 - eor r0,r0,r9,ror#25 @ Sigma1(e) - and r2,r2,r9 - add r3,r3,r0 - eor r2,r2,r11 @ Ch(e,f,g) - add r3,r3,r4 - mov r4,r5,ror#2 - add r3,r3,r2 - eor r4,r4,r5,ror#13 - add r3,r3,r12 - eor r4,r4,r5,ror#22 @ Sigma0(a) - orr r0,r5,r6 - and r2,r5,r6 - and r0,r0,r7 - add r4,r4,r3 - orr r0,r0,r2 @ Maj(a,b,c) - add r8,r8,r3 - add r4,r4,r0 - and r12,r12,#0xff - cmp r12,#0xf2 - bne .Lrounds_16_xx - - ldr r3,[sp,#16*4] @ pull ctx - ldr r0,[r3,#0] - ldr r2,[r3,#4] - ldr r12,[r3,#8] - add r4,r4,r0 - ldr r0,[r3,#12] - add r5,r5,r2 - ldr r2,[r3,#16] - add r6,r6,r12 - ldr r12,[r3,#20] - add r7,r7,r0 - ldr r0,[r3,#24] - add r8,r8,r2 - ldr r2,[r3,#28] - add r9,r9,r12 - ldr r1,[sp,#17*4] @ pull inp - ldr r12,[sp,#18*4] @ pull inp+len - add r10,r10,r0 - add r11,r11,r2 - stmia r3,{r4,r5,r6,r7,r8,r9,r10,r11} - cmp r1,r12 - sub r14,r14,#256 @ rewind Ktbl - bne .Loop - - add sp,sp,#19*4 @ destroy frame - ldmia sp!,{r4-r12,lr} - tst lr,#1 - moveq pc,lr @ be binary compatible with V4, yet - .word 0xe12fff1e @ interoperable with Thumb ISA:-) -.size sha256_block_data_order,.-sha256_block_data_order -.asciz "SHA256 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>" -.align 2 diff --git a/app/openssl/crypto/sha/asm/sha512-586.pl b/app/openssl/crypto/sha/asm/sha512-586.pl deleted file mode 100644 index 5b9f3337..00000000 --- a/app/openssl/crypto/sha/asm/sha512-586.pl +++ /dev/null @@ -1,644 +0,0 @@ -#!/usr/bin/env perl -# -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== -# -# SHA512 block transform for x86. September 2007. -# -# Performance in clock cycles per processed byte (less is better): -# -# Pentium PIII P4 AMD K8 Core2 -# gcc 100 75 116 54 66 -# icc 97 77 95 55 57 -# x86 asm 61 56 82 36 40 -# SSE2 asm - - 38 24 20 -# x86_64 asm(*) - - 30 10.0 10.5 -# -# (*) x86_64 assembler performance is presented for reference -# purposes. -# -# IALU code-path is optimized for elder Pentiums. On vanilla Pentium -# performance improvement over compiler generated code reaches ~60%, -# while on PIII - ~35%. On newer µ-archs improvement varies from 15% -# to 50%, but it's less important as they are expected to execute SSE2 -# code-path, which is commonly ~2-3x faster [than compiler generated -# code]. SSE2 code-path is as fast as original sha512-sse2.pl, even -# though it does not use 128-bit operations. The latter means that -# SSE2-aware kernel is no longer required to execute the code. Another -# difference is that new code optimizes amount of writes, but at the -# cost of increased data cache "footprint" by 1/2KB. - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -push(@INC,"${dir}","${dir}../../perlasm"); -require "x86asm.pl"; - -&asm_init($ARGV[0],"sha512-586.pl",$ARGV[$#ARGV] eq "386"); - -$sse2=0; -for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); } - -&external_label("OPENSSL_ia32cap_P") if ($sse2); - -$Tlo=&DWP(0,"esp"); $Thi=&DWP(4,"esp"); -$Alo=&DWP(8,"esp"); $Ahi=&DWP(8+4,"esp"); -$Blo=&DWP(16,"esp"); $Bhi=&DWP(16+4,"esp"); -$Clo=&DWP(24,"esp"); $Chi=&DWP(24+4,"esp"); -$Dlo=&DWP(32,"esp"); $Dhi=&DWP(32+4,"esp"); -$Elo=&DWP(40,"esp"); $Ehi=&DWP(40+4,"esp"); -$Flo=&DWP(48,"esp"); $Fhi=&DWP(48+4,"esp"); -$Glo=&DWP(56,"esp"); $Ghi=&DWP(56+4,"esp"); -$Hlo=&DWP(64,"esp"); $Hhi=&DWP(64+4,"esp"); -$K512="ebp"; - -$Asse2=&QWP(0,"esp"); -$Bsse2=&QWP(8,"esp"); -$Csse2=&QWP(16,"esp"); -$Dsse2=&QWP(24,"esp"); -$Esse2=&QWP(32,"esp"); -$Fsse2=&QWP(40,"esp"); -$Gsse2=&QWP(48,"esp"); -$Hsse2=&QWP(56,"esp"); - -$A="mm0"; # B-D and -$E="mm4"; # F-H are commonly loaded to respectively mm1-mm3 and - # mm5-mm7, but it's done on on-demand basis... - -sub BODY_00_15_sse2 { - my $prefetch=shift; - - &movq ("mm5",$Fsse2); # load f - &movq ("mm6",$Gsse2); # load g - &movq ("mm7",$Hsse2); # load h - - &movq ("mm1",$E); # %mm1 is sliding right - &movq ("mm2",$E); # %mm2 is sliding left - &psrlq ("mm1",14); - &movq ($Esse2,$E); # modulo-scheduled save e - &psllq ("mm2",23); - &movq ("mm3","mm1"); # %mm3 is T1 - &psrlq ("mm1",4); - &pxor ("mm3","mm2"); - &psllq ("mm2",23); - &pxor ("mm3","mm1"); - &psrlq ("mm1",23); - &pxor ("mm3","mm2"); - &psllq ("mm2",4); - &pxor ("mm3","mm1"); - &paddq ("mm7",QWP(0,$K512)); # h+=K512[i] - &pxor ("mm3","mm2"); # T1=Sigma1_512(e) - - &pxor ("mm5","mm6"); # f^=g - &movq ("mm1",$Bsse2); # load b - &pand ("mm5",$E); # f&=e - &movq ("mm2",$Csse2); # load c - &pxor ("mm5","mm6"); # f^=g - &movq ($E,$Dsse2); # e = load d - &paddq ("mm3","mm5"); # T1+=Ch(e,f,g) - &movq (&QWP(0,"esp"),$A); # modulo-scheduled save a - &paddq ("mm3","mm7"); # T1+=h - - &movq ("mm5",$A); # %mm5 is sliding right - &movq ("mm6",$A); # %mm6 is sliding left - &paddq ("mm3",&QWP(8*9,"esp")); # T1+=X[0] - &psrlq ("mm5",28); - &paddq ($E,"mm3"); # e += T1 - &psllq ("mm6",25); - &movq ("mm7","mm5"); # %mm7 is T2 - &psrlq ("mm5",6); - &pxor ("mm7","mm6"); - &psllq ("mm6",5); - &pxor ("mm7","mm5"); - &psrlq ("mm5",5); - &pxor ("mm7","mm6"); - &psllq ("mm6",6); - &pxor ("mm7","mm5"); - &sub ("esp",8); - &pxor ("mm7","mm6"); # T2=Sigma0_512(a) - - &movq ("mm5",$A); # %mm5=a - &por ($A,"mm2"); # a=a|c - &movq ("mm6",&QWP(8*(9+16-14),"esp")) if ($prefetch); - &pand ("mm5","mm2"); # %mm5=a&c - &pand ($A,"mm1"); # a=(a|c)&b - &movq ("mm2",&QWP(8*(9+16-1),"esp")) if ($prefetch); - &por ("mm5",$A); # %mm5=(a&c)|((a|c)&b) - &paddq ("mm7","mm5"); # T2+=Maj(a,b,c) - &movq ($A,"mm3"); # a=T1 - - &mov (&LB("edx"),&BP(0,$K512)); - &paddq ($A,"mm7"); # a+=T2 - &add ($K512,8); -} - -sub BODY_00_15_x86 { - #define Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) - # LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23 - # HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23 - &mov ("ecx",$Elo); - &mov ("edx",$Ehi); - &mov ("esi","ecx"); - - &shr ("ecx",9) # lo>>9 - &mov ("edi","edx"); - &shr ("edx",9) # hi>>9 - &mov ("ebx","ecx"); - &shl ("esi",14); # lo<<14 - &mov ("eax","edx"); - &shl ("edi",14); # hi<<14 - &xor ("ebx","esi"); - - &shr ("ecx",14-9); # lo>>14 - &xor ("eax","edi"); - &shr ("edx",14-9); # hi>>14 - &xor ("eax","ecx"); - &shl ("esi",18-14); # lo<<18 - &xor ("ebx","edx"); - &shl ("edi",18-14); # hi<<18 - &xor ("ebx","esi"); - - &shr ("ecx",18-14); # lo>>18 - &xor ("eax","edi"); - &shr ("edx",18-14); # hi>>18 - &xor ("eax","ecx"); - &shl ("esi",23-18); # lo<<23 - &xor ("ebx","edx"); - &shl ("edi",23-18); # hi<<23 - &xor ("eax","esi"); - &xor ("ebx","edi"); # T1 = Sigma1(e) - - &mov ("ecx",$Flo); - &mov ("edx",$Fhi); - &mov ("esi",$Glo); - &mov ("edi",$Ghi); - &add ("eax",$Hlo); - &adc ("ebx",$Hhi); # T1 += h - &xor ("ecx","esi"); - &xor ("edx","edi"); - &and ("ecx",$Elo); - &and ("edx",$Ehi); - &add ("eax",&DWP(8*(9+15)+0,"esp")); - &adc ("ebx",&DWP(8*(9+15)+4,"esp")); # T1 += X[0] - &xor ("ecx","esi"); - &xor ("edx","edi"); # Ch(e,f,g) = (f^g)&e)^g - - &mov ("esi",&DWP(0,$K512)); - &mov ("edi",&DWP(4,$K512)); # K[i] - &add ("eax","ecx"); - &adc ("ebx","edx"); # T1 += Ch(e,f,g) - &mov ("ecx",$Dlo); - &mov ("edx",$Dhi); - &add ("eax","esi"); - &adc ("ebx","edi"); # T1 += K[i] - &mov ($Tlo,"eax"); - &mov ($Thi,"ebx"); # put T1 away - &add ("eax","ecx"); - &adc ("ebx","edx"); # d += T1 - - #define Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) - # LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25 - # HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25 - &mov ("ecx",$Alo); - &mov ("edx",$Ahi); - &mov ($Dlo,"eax"); - &mov ($Dhi,"ebx"); - &mov ("esi","ecx"); - - &shr ("ecx",2) # lo>>2 - &mov ("edi","edx"); - &shr ("edx",2) # hi>>2 - &mov ("ebx","ecx"); - &shl ("esi",4); # lo<<4 - &mov ("eax","edx"); - &shl ("edi",4); # hi<<4 - &xor ("ebx","esi"); - - &shr ("ecx",7-2); # lo>>7 - &xor ("eax","edi"); - &shr ("edx",7-2); # hi>>7 - &xor ("ebx","ecx"); - &shl ("esi",25-4); # lo<<25 - &xor ("eax","edx"); - &shl ("edi",25-4); # hi<<25 - &xor ("eax","esi"); - - &shr ("ecx",28-7); # lo>>28 - &xor ("ebx","edi"); - &shr ("edx",28-7); # hi>>28 - &xor ("eax","ecx"); - &shl ("esi",30-25); # lo<<30 - &xor ("ebx","edx"); - &shl ("edi",30-25); # hi<<30 - &xor ("eax","esi"); - &xor ("ebx","edi"); # Sigma0(a) - - &mov ("ecx",$Alo); - &mov ("edx",$Ahi); - &mov ("esi",$Blo); - &mov ("edi",$Bhi); - &add ("eax",$Tlo); - &adc ("ebx",$Thi); # T1 = Sigma0(a)+T1 - &or ("ecx","esi"); - &or ("edx","edi"); - &and ("ecx",$Clo); - &and ("edx",$Chi); - &and ("esi",$Alo); - &and ("edi",$Ahi); - &or ("ecx","esi"); - &or ("edx","edi"); # Maj(a,b,c) = ((a|b)&c)|(a&b) - - &add ("eax","ecx"); - &adc ("ebx","edx"); # T1 += Maj(a,b,c) - &mov ($Tlo,"eax"); - &mov ($Thi,"ebx"); - - &mov (&LB("edx"),&BP(0,$K512)); # pre-fetch LSB of *K - &sub ("esp",8); - &lea ($K512,&DWP(8,$K512)); # K++ -} - - -&function_begin("sha512_block_data_order"); - &mov ("esi",wparam(0)); # ctx - &mov ("edi",wparam(1)); # inp - &mov ("eax",wparam(2)); # num - &mov ("ebx","esp"); # saved sp - - &call (&label("pic_point")); # make it PIC! -&set_label("pic_point"); - &blindpop($K512); - &lea ($K512,&DWP(&label("K512")."-".&label("pic_point"),$K512)); - - &sub ("esp",16); - &and ("esp",-64); - - &shl ("eax",7); - &add ("eax","edi"); - &mov (&DWP(0,"esp"),"esi"); # ctx - &mov (&DWP(4,"esp"),"edi"); # inp - &mov (&DWP(8,"esp"),"eax"); # inp+num*128 - &mov (&DWP(12,"esp"),"ebx"); # saved sp - -if ($sse2) { - &picmeup("edx","OPENSSL_ia32cap_P",$K512,&label("K512")); - &bt (&DWP(0,"edx"),26); - &jnc (&label("loop_x86")); - - # load ctx->h[0-7] - &movq ($A,&QWP(0,"esi")); - &movq ("mm1",&QWP(8,"esi")); - &movq ("mm2",&QWP(16,"esi")); - &movq ("mm3",&QWP(24,"esi")); - &movq ($E,&QWP(32,"esi")); - &movq ("mm5",&QWP(40,"esi")); - &movq ("mm6",&QWP(48,"esi")); - &movq ("mm7",&QWP(56,"esi")); - &sub ("esp",8*10); - -&set_label("loop_sse2",16); - # &movq ($Asse2,$A); - &movq ($Bsse2,"mm1"); - &movq ($Csse2,"mm2"); - &movq ($Dsse2,"mm3"); - # &movq ($Esse2,$E); - &movq ($Fsse2,"mm5"); - &movq ($Gsse2,"mm6"); - &movq ($Hsse2,"mm7"); - - &mov ("ecx",&DWP(0,"edi")); - &mov ("edx",&DWP(4,"edi")); - &add ("edi",8); - &bswap ("ecx"); - &bswap ("edx"); - &mov (&DWP(8*9+4,"esp"),"ecx"); - &mov (&DWP(8*9+0,"esp"),"edx"); - -&set_label("00_14_sse2",16); - &mov ("eax",&DWP(0,"edi")); - &mov ("ebx",&DWP(4,"edi")); - &add ("edi",8); - &bswap ("eax"); - &bswap ("ebx"); - &mov (&DWP(8*8+4,"esp"),"eax"); - &mov (&DWP(8*8+0,"esp"),"ebx"); - - &BODY_00_15_sse2(); - - &cmp (&LB("edx"),0x35); - &jne (&label("00_14_sse2")); - - &BODY_00_15_sse2(1); - -&set_label("16_79_sse2",16); - #&movq ("mm2",&QWP(8*(9+16-1),"esp")); #prefetched in BODY_00_15 - #&movq ("mm6",&QWP(8*(9+16-14),"esp")); - &movq ("mm1","mm2"); - - &psrlq ("mm2",1); - &movq ("mm7","mm6"); - &psrlq ("mm6",6); - &movq ("mm3","mm2"); - - &psrlq ("mm2",7-1); - &movq ("mm5","mm6"); - &psrlq ("mm6",19-6); - &pxor ("mm3","mm2"); - - &psrlq ("mm2",8-7); - &pxor ("mm5","mm6"); - &psrlq ("mm6",61-19); - &pxor ("mm3","mm2"); - - &movq ("mm2",&QWP(8*(9+16),"esp")); - - &psllq ("mm1",56); - &pxor ("mm5","mm6"); - &psllq ("mm7",3); - &pxor ("mm3","mm1"); - - &paddq ("mm2",&QWP(8*(9+16-9),"esp")); - - &psllq ("mm1",63-56); - &pxor ("mm5","mm7"); - &psllq ("mm7",45-3); - &pxor ("mm3","mm1"); - &pxor ("mm5","mm7"); - - &paddq ("mm3","mm5"); - &paddq ("mm3","mm2"); - &movq (&QWP(8*9,"esp"),"mm3"); - - &BODY_00_15_sse2(1); - - &cmp (&LB("edx"),0x17); - &jne (&label("16_79_sse2")); - - # &movq ($A,$Asse2); - &movq ("mm1",$Bsse2); - &movq ("mm2",$Csse2); - &movq ("mm3",$Dsse2); - # &movq ($E,$Esse2); - &movq ("mm5",$Fsse2); - &movq ("mm6",$Gsse2); - &movq ("mm7",$Hsse2); - - &paddq ($A,&QWP(0,"esi")); - &paddq ("mm1",&QWP(8,"esi")); - &paddq ("mm2",&QWP(16,"esi")); - &paddq ("mm3",&QWP(24,"esi")); - &paddq ($E,&QWP(32,"esi")); - &paddq ("mm5",&QWP(40,"esi")); - &paddq ("mm6",&QWP(48,"esi")); - &paddq ("mm7",&QWP(56,"esi")); - - &movq (&QWP(0,"esi"),$A); - &movq (&QWP(8,"esi"),"mm1"); - &movq (&QWP(16,"esi"),"mm2"); - &movq (&QWP(24,"esi"),"mm3"); - &movq (&QWP(32,"esi"),$E); - &movq (&QWP(40,"esi"),"mm5"); - &movq (&QWP(48,"esi"),"mm6"); - &movq (&QWP(56,"esi"),"mm7"); - - &add ("esp",8*80); # destroy frame - &sub ($K512,8*80); # rewind K - - &cmp ("edi",&DWP(8*10+8,"esp")); # are we done yet? - &jb (&label("loop_sse2")); - - &emms (); - &mov ("esp",&DWP(8*10+12,"esp")); # restore sp -&function_end_A(); -} -&set_label("loop_x86",16); - # copy input block to stack reversing byte and qword order - for ($i=0;$i<8;$i++) { - &mov ("eax",&DWP($i*16+0,"edi")); - &mov ("ebx",&DWP($i*16+4,"edi")); - &mov ("ecx",&DWP($i*16+8,"edi")); - &mov ("edx",&DWP($i*16+12,"edi")); - &bswap ("eax"); - &bswap ("ebx"); - &bswap ("ecx"); - &bswap ("edx"); - &push ("eax"); - &push ("ebx"); - &push ("ecx"); - &push ("edx"); - } - &add ("edi",128); - &sub ("esp",9*8); # place for T,A,B,C,D,E,F,G,H - &mov (&DWP(8*(9+16)+4,"esp"),"edi"); - - # copy ctx->h[0-7] to A,B,C,D,E,F,G,H on stack - &lea ("edi",&DWP(8,"esp")); - &mov ("ecx",16); - &data_word(0xA5F3F689); # rep movsd - -&set_label("00_15_x86",16); - &BODY_00_15_x86(); - - &cmp (&LB("edx"),0x94); - &jne (&label("00_15_x86")); - -&set_label("16_79_x86",16); - #define sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) - # LO lo>>1^hi<<31 ^ lo>>8^hi<<24 ^ lo>>7^hi<<25 - # HI hi>>1^lo<<31 ^ hi>>8^lo<<24 ^ hi>>7 - &mov ("ecx",&DWP(8*(9+15+16-1)+0,"esp")); - &mov ("edx",&DWP(8*(9+15+16-1)+4,"esp")); - &mov ("esi","ecx"); - - &shr ("ecx",1) # lo>>1 - &mov ("edi","edx"); - &shr ("edx",1) # hi>>1 - &mov ("eax","ecx"); - &shl ("esi",24); # lo<<24 - &mov ("ebx","edx"); - &shl ("edi",24); # hi<<24 - &xor ("ebx","esi"); - - &shr ("ecx",7-1); # lo>>7 - &xor ("eax","edi"); - &shr ("edx",7-1); # hi>>7 - &xor ("eax","ecx"); - &shl ("esi",31-24); # lo<<31 - &xor ("ebx","edx"); - &shl ("edi",25-24); # hi<<25 - &xor ("ebx","esi"); - - &shr ("ecx",8-7); # lo>>8 - &xor ("eax","edi"); - &shr ("edx",8-7); # hi>>8 - &xor ("eax","ecx"); - &shl ("edi",31-25); # hi<<31 - &xor ("ebx","edx"); - &xor ("eax","edi"); # T1 = sigma0(X[-15]) - - &mov (&DWP(0,"esp"),"eax"); - &mov (&DWP(4,"esp"),"ebx"); # put T1 away - - #define sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) - # LO lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26 - # HI hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6 - &mov ("ecx",&DWP(8*(9+15+16-14)+0,"esp")); - &mov ("edx",&DWP(8*(9+15+16-14)+4,"esp")); - &mov ("esi","ecx"); - - &shr ("ecx",6) # lo>>6 - &mov ("edi","edx"); - &shr ("edx",6) # hi>>6 - &mov ("eax","ecx"); - &shl ("esi",3); # lo<<3 - &mov ("ebx","edx"); - &shl ("edi",3); # hi<<3 - &xor ("eax","esi"); - - &shr ("ecx",19-6); # lo>>19 - &xor ("ebx","edi"); - &shr ("edx",19-6); # hi>>19 - &xor ("eax","ecx"); - &shl ("esi",13-3); # lo<<13 - &xor ("ebx","edx"); - &shl ("edi",13-3); # hi<<13 - &xor ("ebx","esi"); - - &shr ("ecx",29-19); # lo>>29 - &xor ("eax","edi"); - &shr ("edx",29-19); # hi>>29 - &xor ("ebx","ecx"); - &shl ("edi",26-13); # hi<<26 - &xor ("eax","edx"); - &xor ("eax","edi"); # sigma1(X[-2]) - - &mov ("ecx",&DWP(8*(9+15+16)+0,"esp")); - &mov ("edx",&DWP(8*(9+15+16)+4,"esp")); - &add ("eax",&DWP(0,"esp")); - &adc ("ebx",&DWP(4,"esp")); # T1 = sigma1(X[-2])+T1 - &mov ("esi",&DWP(8*(9+15+16-9)+0,"esp")); - &mov ("edi",&DWP(8*(9+15+16-9)+4,"esp")); - &add ("eax","ecx"); - &adc ("ebx","edx"); # T1 += X[-16] - &add ("eax","esi"); - &adc ("ebx","edi"); # T1 += X[-7] - &mov (&DWP(8*(9+15)+0,"esp"),"eax"); - &mov (&DWP(8*(9+15)+4,"esp"),"ebx"); # save X[0] - - &BODY_00_15_x86(); - - &cmp (&LB("edx"),0x17); - &jne (&label("16_79_x86")); - - &mov ("esi",&DWP(8*(9+16+80)+0,"esp"));# ctx - &mov ("edi",&DWP(8*(9+16+80)+4,"esp"));# inp - for($i=0;$i<4;$i++) { - &mov ("eax",&DWP($i*16+0,"esi")); - &mov ("ebx",&DWP($i*16+4,"esi")); - &mov ("ecx",&DWP($i*16+8,"esi")); - &mov ("edx",&DWP($i*16+12,"esi")); - &add ("eax",&DWP(8+($i*16)+0,"esp")); - &adc ("ebx",&DWP(8+($i*16)+4,"esp")); - &mov (&DWP($i*16+0,"esi"),"eax"); - &mov (&DWP($i*16+4,"esi"),"ebx"); - &add ("ecx",&DWP(8+($i*16)+8,"esp")); - &adc ("edx",&DWP(8+($i*16)+12,"esp")); - &mov (&DWP($i*16+8,"esi"),"ecx"); - &mov (&DWP($i*16+12,"esi"),"edx"); - } - &add ("esp",8*(9+16+80)); # destroy frame - &sub ($K512,8*80); # rewind K - - &cmp ("edi",&DWP(8,"esp")); # are we done yet? - &jb (&label("loop_x86")); - - &mov ("esp",&DWP(12,"esp")); # restore sp -&function_end_A(); - -&set_label("K512",64); # Yes! I keep it in the code segment! - &data_word(0xd728ae22,0x428a2f98); # u64 - &data_word(0x23ef65cd,0x71374491); # u64 - &data_word(0xec4d3b2f,0xb5c0fbcf); # u64 - &data_word(0x8189dbbc,0xe9b5dba5); # u64 - &data_word(0xf348b538,0x3956c25b); # u64 - &data_word(0xb605d019,0x59f111f1); # u64 - &data_word(0xaf194f9b,0x923f82a4); # u64 - &data_word(0xda6d8118,0xab1c5ed5); # u64 - &data_word(0xa3030242,0xd807aa98); # u64 - &data_word(0x45706fbe,0x12835b01); # u64 - &data_word(0x4ee4b28c,0x243185be); # u64 - &data_word(0xd5ffb4e2,0x550c7dc3); # u64 - &data_word(0xf27b896f,0x72be5d74); # u64 - &data_word(0x3b1696b1,0x80deb1fe); # u64 - &data_word(0x25c71235,0x9bdc06a7); # u64 - &data_word(0xcf692694,0xc19bf174); # u64 - &data_word(0x9ef14ad2,0xe49b69c1); # u64 - &data_word(0x384f25e3,0xefbe4786); # u64 - &data_word(0x8b8cd5b5,0x0fc19dc6); # u64 - &data_word(0x77ac9c65,0x240ca1cc); # u64 - &data_word(0x592b0275,0x2de92c6f); # u64 - &data_word(0x6ea6e483,0x4a7484aa); # u64 - &data_word(0xbd41fbd4,0x5cb0a9dc); # u64 - &data_word(0x831153b5,0x76f988da); # u64 - &data_word(0xee66dfab,0x983e5152); # u64 - &data_word(0x2db43210,0xa831c66d); # u64 - &data_word(0x98fb213f,0xb00327c8); # u64 - &data_word(0xbeef0ee4,0xbf597fc7); # u64 - &data_word(0x3da88fc2,0xc6e00bf3); # u64 - &data_word(0x930aa725,0xd5a79147); # u64 - &data_word(0xe003826f,0x06ca6351); # u64 - &data_word(0x0a0e6e70,0x14292967); # u64 - &data_word(0x46d22ffc,0x27b70a85); # u64 - &data_word(0x5c26c926,0x2e1b2138); # u64 - &data_word(0x5ac42aed,0x4d2c6dfc); # u64 - &data_word(0x9d95b3df,0x53380d13); # u64 - &data_word(0x8baf63de,0x650a7354); # u64 - &data_word(0x3c77b2a8,0x766a0abb); # u64 - &data_word(0x47edaee6,0x81c2c92e); # u64 - &data_word(0x1482353b,0x92722c85); # u64 - &data_word(0x4cf10364,0xa2bfe8a1); # u64 - &data_word(0xbc423001,0xa81a664b); # u64 - &data_word(0xd0f89791,0xc24b8b70); # u64 - &data_word(0x0654be30,0xc76c51a3); # u64 - &data_word(0xd6ef5218,0xd192e819); # u64 - &data_word(0x5565a910,0xd6990624); # u64 - &data_word(0x5771202a,0xf40e3585); # u64 - &data_word(0x32bbd1b8,0x106aa070); # u64 - &data_word(0xb8d2d0c8,0x19a4c116); # u64 - &data_word(0x5141ab53,0x1e376c08); # u64 - &data_word(0xdf8eeb99,0x2748774c); # u64 - &data_word(0xe19b48a8,0x34b0bcb5); # u64 - &data_word(0xc5c95a63,0x391c0cb3); # u64 - &data_word(0xe3418acb,0x4ed8aa4a); # u64 - &data_word(0x7763e373,0x5b9cca4f); # u64 - &data_word(0xd6b2b8a3,0x682e6ff3); # u64 - &data_word(0x5defb2fc,0x748f82ee); # u64 - &data_word(0x43172f60,0x78a5636f); # u64 - &data_word(0xa1f0ab72,0x84c87814); # u64 - &data_word(0x1a6439ec,0x8cc70208); # u64 - &data_word(0x23631e28,0x90befffa); # u64 - &data_word(0xde82bde9,0xa4506ceb); # u64 - &data_word(0xb2c67915,0xbef9a3f7); # u64 - &data_word(0xe372532b,0xc67178f2); # u64 - &data_word(0xea26619c,0xca273ece); # u64 - &data_word(0x21c0c207,0xd186b8c7); # u64 - &data_word(0xcde0eb1e,0xeada7dd6); # u64 - &data_word(0xee6ed178,0xf57d4f7f); # u64 - &data_word(0x72176fba,0x06f067aa); # u64 - &data_word(0xa2c898a6,0x0a637dc5); # u64 - &data_word(0xbef90dae,0x113f9804); # u64 - &data_word(0x131c471b,0x1b710b35); # u64 - &data_word(0x23047d84,0x28db77f5); # u64 - &data_word(0x40c72493,0x32caab7b); # u64 - &data_word(0x15c9bebc,0x3c9ebe0a); # u64 - &data_word(0x9c100d4c,0x431d67c4); # u64 - &data_word(0xcb3e42b6,0x4cc5d4be); # u64 - &data_word(0xfc657e2a,0x597f299c); # u64 - &data_word(0x3ad6faec,0x5fcb6fab); # u64 - &data_word(0x4a475817,0x6c44198c); # u64 -&function_end_B("sha512_block_data_order"); -&asciz("SHA512 block transform for x86, CRYPTOGAMS by <appro\@openssl.org>"); - -&asm_finish(); diff --git a/app/openssl/crypto/sha/asm/sha512-armv4.pl b/app/openssl/crypto/sha/asm/sha512-armv4.pl deleted file mode 100644 index 3a35861a..00000000 --- a/app/openssl/crypto/sha/asm/sha512-armv4.pl +++ /dev/null @@ -1,403 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# SHA512 block procedure for ARMv4. September 2007. - -# This code is ~4.5 (four and a half) times faster than code generated -# by gcc 3.4 and it spends ~72 clock cycles per byte [on single-issue -# Xscale PXA250 core]. -# -# July 2010. -# -# Rescheduling for dual-issue pipeline resulted in 6% improvement on -# Cortex A8 core and ~40 cycles per processed byte. - -# Byte order [in]dependence. ========================================= -# -# Caller is expected to maintain specific *dword* order in h[0-7], -# namely with most significant dword at *lower* address, which is -# reflected in below two parameters. *Byte* order within these dwords -# in turn is whatever *native* byte order on current platform. -$hi=0; -$lo=4; -# ==================================================================== - -while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {} -open STDOUT,">$output"; - -$ctx="r0"; -$inp="r1"; -$len="r2"; -$Tlo="r3"; -$Thi="r4"; -$Alo="r5"; -$Ahi="r6"; -$Elo="r7"; -$Ehi="r8"; -$t0="r9"; -$t1="r10"; -$t2="r11"; -$t3="r12"; -############ r13 is stack pointer -$Ktbl="r14"; -############ r15 is program counter - -$Aoff=8*0; -$Boff=8*1; -$Coff=8*2; -$Doff=8*3; -$Eoff=8*4; -$Foff=8*5; -$Goff=8*6; -$Hoff=8*7; -$Xoff=8*8; - -sub BODY_00_15() { -my $magic = shift; -$code.=<<___; - ldr $t2,[sp,#$Hoff+0] @ h.lo - ldr $t3,[sp,#$Hoff+4] @ h.hi - @ Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) - @ LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23 - @ HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23 - mov $t0,$Elo,lsr#14 - mov $t1,$Ehi,lsr#14 - eor $t0,$t0,$Ehi,lsl#18 - eor $t1,$t1,$Elo,lsl#18 - eor $t0,$t0,$Elo,lsr#18 - eor $t1,$t1,$Ehi,lsr#18 - eor $t0,$t0,$Ehi,lsl#14 - eor $t1,$t1,$Elo,lsl#14 - eor $t0,$t0,$Ehi,lsr#9 - eor $t1,$t1,$Elo,lsr#9 - eor $t0,$t0,$Elo,lsl#23 - eor $t1,$t1,$Ehi,lsl#23 @ Sigma1(e) - adds $Tlo,$Tlo,$t0 - ldr $t0,[sp,#$Foff+0] @ f.lo - adc $Thi,$Thi,$t1 @ T += Sigma1(e) - ldr $t1,[sp,#$Foff+4] @ f.hi - adds $Tlo,$Tlo,$t2 - ldr $t2,[sp,#$Goff+0] @ g.lo - adc $Thi,$Thi,$t3 @ T += h - ldr $t3,[sp,#$Goff+4] @ g.hi - - eor $t0,$t0,$t2 - str $Elo,[sp,#$Eoff+0] - eor $t1,$t1,$t3 - str $Ehi,[sp,#$Eoff+4] - and $t0,$t0,$Elo - str $Alo,[sp,#$Aoff+0] - and $t1,$t1,$Ehi - str $Ahi,[sp,#$Aoff+4] - eor $t0,$t0,$t2 - ldr $t2,[$Ktbl,#4] @ K[i].lo - eor $t1,$t1,$t3 @ Ch(e,f,g) - ldr $t3,[$Ktbl,#0] @ K[i].hi - - adds $Tlo,$Tlo,$t0 - ldr $Elo,[sp,#$Doff+0] @ d.lo - adc $Thi,$Thi,$t1 @ T += Ch(e,f,g) - ldr $Ehi,[sp,#$Doff+4] @ d.hi - adds $Tlo,$Tlo,$t2 - adc $Thi,$Thi,$t3 @ T += K[i] - adds $Elo,$Elo,$Tlo - adc $Ehi,$Ehi,$Thi @ d += T - - and $t0,$t2,#0xff - teq $t0,#$magic - orreq $Ktbl,$Ktbl,#1 - - ldr $t2,[sp,#$Boff+0] @ b.lo - ldr $t3,[sp,#$Coff+0] @ c.lo - @ Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) - @ LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25 - @ HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25 - mov $t0,$Alo,lsr#28 - mov $t1,$Ahi,lsr#28 - eor $t0,$t0,$Ahi,lsl#4 - eor $t1,$t1,$Alo,lsl#4 - eor $t0,$t0,$Ahi,lsr#2 - eor $t1,$t1,$Alo,lsr#2 - eor $t0,$t0,$Alo,lsl#30 - eor $t1,$t1,$Ahi,lsl#30 - eor $t0,$t0,$Ahi,lsr#7 - eor $t1,$t1,$Alo,lsr#7 - eor $t0,$t0,$Alo,lsl#25 - eor $t1,$t1,$Ahi,lsl#25 @ Sigma0(a) - adds $Tlo,$Tlo,$t0 - adc $Thi,$Thi,$t1 @ T += Sigma0(a) - - and $t0,$Alo,$t2 - orr $Alo,$Alo,$t2 - ldr $t1,[sp,#$Boff+4] @ b.hi - ldr $t2,[sp,#$Coff+4] @ c.hi - and $Alo,$Alo,$t3 - orr $Alo,$Alo,$t0 @ Maj(a,b,c).lo - and $t3,$Ahi,$t1 - orr $Ahi,$Ahi,$t1 - and $Ahi,$Ahi,$t2 - orr $Ahi,$Ahi,$t3 @ Maj(a,b,c).hi - adds $Alo,$Alo,$Tlo - adc $Ahi,$Ahi,$Thi @ h += T - - sub sp,sp,#8 - add $Ktbl,$Ktbl,#8 -___ -} -$code=<<___; -.text -.code 32 -.type K512,%object -.align 5 -K512: -.word 0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd -.word 0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc -.word 0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019 -.word 0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118 -.word 0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe -.word 0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2 -.word 0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1 -.word 0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694 -.word 0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3 -.word 0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65 -.word 0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483 -.word 0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5 -.word 0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210 -.word 0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4 -.word 0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725 -.word 0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70 -.word 0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926 -.word 0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df -.word 0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8 -.word 0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b -.word 0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001 -.word 0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30 -.word 0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910 -.word 0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8 -.word 0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53 -.word 0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8 -.word 0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb -.word 0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3 -.word 0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60 -.word 0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec -.word 0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9 -.word 0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b -.word 0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207 -.word 0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178 -.word 0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6 -.word 0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b -.word 0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493 -.word 0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c -.word 0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a -.word 0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817 -.size K512,.-K512 - -.global sha512_block_data_order -.type sha512_block_data_order,%function -sha512_block_data_order: - sub r3,pc,#8 @ sha512_block_data_order - add $len,$inp,$len,lsl#7 @ len to point at the end of inp - stmdb sp!,{r4-r12,lr} - sub $Ktbl,r3,#640 @ K512 - sub sp,sp,#9*8 - - ldr $Elo,[$ctx,#$Eoff+$lo] - ldr $Ehi,[$ctx,#$Eoff+$hi] - ldr $t0, [$ctx,#$Goff+$lo] - ldr $t1, [$ctx,#$Goff+$hi] - ldr $t2, [$ctx,#$Hoff+$lo] - ldr $t3, [$ctx,#$Hoff+$hi] -.Loop: - str $t0, [sp,#$Goff+0] - str $t1, [sp,#$Goff+4] - str $t2, [sp,#$Hoff+0] - str $t3, [sp,#$Hoff+4] - ldr $Alo,[$ctx,#$Aoff+$lo] - ldr $Ahi,[$ctx,#$Aoff+$hi] - ldr $Tlo,[$ctx,#$Boff+$lo] - ldr $Thi,[$ctx,#$Boff+$hi] - ldr $t0, [$ctx,#$Coff+$lo] - ldr $t1, [$ctx,#$Coff+$hi] - ldr $t2, [$ctx,#$Doff+$lo] - ldr $t3, [$ctx,#$Doff+$hi] - str $Tlo,[sp,#$Boff+0] - str $Thi,[sp,#$Boff+4] - str $t0, [sp,#$Coff+0] - str $t1, [sp,#$Coff+4] - str $t2, [sp,#$Doff+0] - str $t3, [sp,#$Doff+4] - ldr $Tlo,[$ctx,#$Foff+$lo] - ldr $Thi,[$ctx,#$Foff+$hi] - str $Tlo,[sp,#$Foff+0] - str $Thi,[sp,#$Foff+4] - -.L00_15: - ldrb $Tlo,[$inp,#7] - ldrb $t0, [$inp,#6] - ldrb $t1, [$inp,#5] - ldrb $t2, [$inp,#4] - ldrb $Thi,[$inp,#3] - ldrb $t3, [$inp,#2] - orr $Tlo,$Tlo,$t0,lsl#8 - ldrb $t0, [$inp,#1] - orr $Tlo,$Tlo,$t1,lsl#16 - ldrb $t1, [$inp],#8 - orr $Tlo,$Tlo,$t2,lsl#24 - orr $Thi,$Thi,$t3,lsl#8 - orr $Thi,$Thi,$t0,lsl#16 - orr $Thi,$Thi,$t1,lsl#24 - str $Tlo,[sp,#$Xoff+0] - str $Thi,[sp,#$Xoff+4] -___ - &BODY_00_15(0x94); -$code.=<<___; - tst $Ktbl,#1 - beq .L00_15 - bic $Ktbl,$Ktbl,#1 - -.L16_79: - ldr $t0,[sp,#`$Xoff+8*(16-1)`+0] - ldr $t1,[sp,#`$Xoff+8*(16-1)`+4] - ldr $t2,[sp,#`$Xoff+8*(16-14)`+0] - ldr $t3,[sp,#`$Xoff+8*(16-14)`+4] - - @ sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) - @ LO lo>>1^hi<<31 ^ lo>>8^hi<<24 ^ lo>>7^hi<<25 - @ HI hi>>1^lo<<31 ^ hi>>8^lo<<24 ^ hi>>7 - mov $Tlo,$t0,lsr#1 - mov $Thi,$t1,lsr#1 - eor $Tlo,$Tlo,$t1,lsl#31 - eor $Thi,$Thi,$t0,lsl#31 - eor $Tlo,$Tlo,$t0,lsr#8 - eor $Thi,$Thi,$t1,lsr#8 - eor $Tlo,$Tlo,$t1,lsl#24 - eor $Thi,$Thi,$t0,lsl#24 - eor $Tlo,$Tlo,$t0,lsr#7 - eor $Thi,$Thi,$t1,lsr#7 - eor $Tlo,$Tlo,$t1,lsl#25 - - @ sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) - @ LO lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26 - @ HI hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6 - mov $t0,$t2,lsr#19 - mov $t1,$t3,lsr#19 - eor $t0,$t0,$t3,lsl#13 - eor $t1,$t1,$t2,lsl#13 - eor $t0,$t0,$t3,lsr#29 - eor $t1,$t1,$t2,lsr#29 - eor $t0,$t0,$t2,lsl#3 - eor $t1,$t1,$t3,lsl#3 - eor $t0,$t0,$t2,lsr#6 - eor $t1,$t1,$t3,lsr#6 - eor $t0,$t0,$t3,lsl#26 - - ldr $t2,[sp,#`$Xoff+8*(16-9)`+0] - ldr $t3,[sp,#`$Xoff+8*(16-9)`+4] - adds $Tlo,$Tlo,$t0 - adc $Thi,$Thi,$t1 - - ldr $t0,[sp,#`$Xoff+8*16`+0] - ldr $t1,[sp,#`$Xoff+8*16`+4] - adds $Tlo,$Tlo,$t2 - adc $Thi,$Thi,$t3 - adds $Tlo,$Tlo,$t0 - adc $Thi,$Thi,$t1 - str $Tlo,[sp,#$Xoff+0] - str $Thi,[sp,#$Xoff+4] -___ - &BODY_00_15(0x17); -$code.=<<___; - tst $Ktbl,#1 - beq .L16_79 - bic $Ktbl,$Ktbl,#1 - - ldr $Tlo,[sp,#$Boff+0] - ldr $Thi,[sp,#$Boff+4] - ldr $t0, [$ctx,#$Aoff+$lo] - ldr $t1, [$ctx,#$Aoff+$hi] - ldr $t2, [$ctx,#$Boff+$lo] - ldr $t3, [$ctx,#$Boff+$hi] - adds $t0,$Alo,$t0 - adc $t1,$Ahi,$t1 - adds $t2,$Tlo,$t2 - adc $t3,$Thi,$t3 - str $t0, [$ctx,#$Aoff+$lo] - str $t1, [$ctx,#$Aoff+$hi] - str $t2, [$ctx,#$Boff+$lo] - str $t3, [$ctx,#$Boff+$hi] - - ldr $Alo,[sp,#$Coff+0] - ldr $Ahi,[sp,#$Coff+4] - ldr $Tlo,[sp,#$Doff+0] - ldr $Thi,[sp,#$Doff+4] - ldr $t0, [$ctx,#$Coff+$lo] - ldr $t1, [$ctx,#$Coff+$hi] - ldr $t2, [$ctx,#$Doff+$lo] - ldr $t3, [$ctx,#$Doff+$hi] - adds $t0,$Alo,$t0 - adc $t1,$Ahi,$t1 - adds $t2,$Tlo,$t2 - adc $t3,$Thi,$t3 - str $t0, [$ctx,#$Coff+$lo] - str $t1, [$ctx,#$Coff+$hi] - str $t2, [$ctx,#$Doff+$lo] - str $t3, [$ctx,#$Doff+$hi] - - ldr $Tlo,[sp,#$Foff+0] - ldr $Thi,[sp,#$Foff+4] - ldr $t0, [$ctx,#$Eoff+$lo] - ldr $t1, [$ctx,#$Eoff+$hi] - ldr $t2, [$ctx,#$Foff+$lo] - ldr $t3, [$ctx,#$Foff+$hi] - adds $Elo,$Elo,$t0 - adc $Ehi,$Ehi,$t1 - adds $t2,$Tlo,$t2 - adc $t3,$Thi,$t3 - str $Elo,[$ctx,#$Eoff+$lo] - str $Ehi,[$ctx,#$Eoff+$hi] - str $t2, [$ctx,#$Foff+$lo] - str $t3, [$ctx,#$Foff+$hi] - - ldr $Alo,[sp,#$Goff+0] - ldr $Ahi,[sp,#$Goff+4] - ldr $Tlo,[sp,#$Hoff+0] - ldr $Thi,[sp,#$Hoff+4] - ldr $t0, [$ctx,#$Goff+$lo] - ldr $t1, [$ctx,#$Goff+$hi] - ldr $t2, [$ctx,#$Hoff+$lo] - ldr $t3, [$ctx,#$Hoff+$hi] - adds $t0,$Alo,$t0 - adc $t1,$Ahi,$t1 - adds $t2,$Tlo,$t2 - adc $t3,$Thi,$t3 - str $t0, [$ctx,#$Goff+$lo] - str $t1, [$ctx,#$Goff+$hi] - str $t2, [$ctx,#$Hoff+$lo] - str $t3, [$ctx,#$Hoff+$hi] - - add sp,sp,#640 - sub $Ktbl,$Ktbl,#640 - - teq $inp,$len - bne .Loop - - add sp,sp,#8*9 @ destroy frame - ldmia sp!,{r4-r12,lr} - tst lr,#1 - moveq pc,lr @ be binary compatible with V4, yet - bx lr @ interoperable with Thumb ISA:-) -.size sha512_block_data_order,.-sha512_block_data_order -.asciz "SHA512 block transform for ARMv4, CRYPTOGAMS by <appro\@openssl.org>" -.align 2 -___ - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm; # make it possible to compile with -march=armv4 -print $code; -close STDOUT; # enforce flush diff --git a/app/openssl/crypto/sha/asm/sha512-armv4.s b/app/openssl/crypto/sha/asm/sha512-armv4.s deleted file mode 100644 index b030c16c..00000000 --- a/app/openssl/crypto/sha/asm/sha512-armv4.s +++ /dev/null @@ -1,412 +0,0 @@ -.text -.code 32 -.type K512,%object -.align 5 -K512: -.word 0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd -.word 0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc -.word 0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019 -.word 0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118 -.word 0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe -.word 0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2 -.word 0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1 -.word 0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694 -.word 0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3 -.word 0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65 -.word 0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483 -.word 0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5 -.word 0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210 -.word 0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4 -.word 0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725 -.word 0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70 -.word 0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926 -.word 0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df -.word 0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8 -.word 0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b -.word 0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001 -.word 0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30 -.word 0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910 -.word 0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8 -.word 0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53 -.word 0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8 -.word 0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb -.word 0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3 -.word 0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60 -.word 0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec -.word 0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9 -.word 0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b -.word 0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207 -.word 0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178 -.word 0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6 -.word 0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b -.word 0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493 -.word 0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c -.word 0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a -.word 0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817 -.size K512,.-K512 - -.global sha512_block_data_order -.type sha512_block_data_order,%function -sha512_block_data_order: - sub r3,pc,#8 @ sha512_block_data_order - add r2,r1,r2,lsl#7 @ len to point at the end of inp - stmdb sp!,{r4-r12,lr} - sub r14,r3,#640 @ K512 - sub sp,sp,#9*8 - - ldr r7,[r0,#32+4] - ldr r8,[r0,#32+0] - ldr r9, [r0,#48+4] - ldr r10, [r0,#48+0] - ldr r11, [r0,#56+4] - ldr r12, [r0,#56+0] -.Loop: - str r9, [sp,#48+0] - str r10, [sp,#48+4] - str r11, [sp,#56+0] - str r12, [sp,#56+4] - ldr r5,[r0,#0+4] - ldr r6,[r0,#0+0] - ldr r3,[r0,#8+4] - ldr r4,[r0,#8+0] - ldr r9, [r0,#16+4] - ldr r10, [r0,#16+0] - ldr r11, [r0,#24+4] - ldr r12, [r0,#24+0] - str r3,[sp,#8+0] - str r4,[sp,#8+4] - str r9, [sp,#16+0] - str r10, [sp,#16+4] - str r11, [sp,#24+0] - str r12, [sp,#24+4] - ldr r3,[r0,#40+4] - ldr r4,[r0,#40+0] - str r3,[sp,#40+0] - str r4,[sp,#40+4] - -.L00_15: - ldrb r3,[r1,#7] - ldrb r9, [r1,#6] - ldrb r10, [r1,#5] - ldrb r11, [r1,#4] - ldrb r4,[r1,#3] - ldrb r12, [r1,#2] - orr r3,r3,r9,lsl#8 - ldrb r9, [r1,#1] - orr r3,r3,r10,lsl#16 - ldrb r10, [r1],#8 - orr r3,r3,r11,lsl#24 - orr r4,r4,r12,lsl#8 - orr r4,r4,r9,lsl#16 - orr r4,r4,r10,lsl#24 - str r3,[sp,#64+0] - str r4,[sp,#64+4] - ldr r11,[sp,#56+0] @ h.lo - ldr r12,[sp,#56+4] @ h.hi - @ Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) - @ LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23 - @ HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23 - mov r9,r7,lsr#14 - mov r10,r8,lsr#14 - eor r9,r9,r8,lsl#18 - eor r10,r10,r7,lsl#18 - eor r9,r9,r7,lsr#18 - eor r10,r10,r8,lsr#18 - eor r9,r9,r8,lsl#14 - eor r10,r10,r7,lsl#14 - eor r9,r9,r8,lsr#9 - eor r10,r10,r7,lsr#9 - eor r9,r9,r7,lsl#23 - eor r10,r10,r8,lsl#23 @ Sigma1(e) - adds r3,r3,r9 - ldr r9,[sp,#40+0] @ f.lo - adc r4,r4,r10 @ T += Sigma1(e) - ldr r10,[sp,#40+4] @ f.hi - adds r3,r3,r11 - ldr r11,[sp,#48+0] @ g.lo - adc r4,r4,r12 @ T += h - ldr r12,[sp,#48+4] @ g.hi - - eor r9,r9,r11 - str r7,[sp,#32+0] - eor r10,r10,r12 - str r8,[sp,#32+4] - and r9,r9,r7 - str r5,[sp,#0+0] - and r10,r10,r8 - str r6,[sp,#0+4] - eor r9,r9,r11 - ldr r11,[r14,#4] @ K[i].lo - eor r10,r10,r12 @ Ch(e,f,g) - ldr r12,[r14,#0] @ K[i].hi - - adds r3,r3,r9 - ldr r7,[sp,#24+0] @ d.lo - adc r4,r4,r10 @ T += Ch(e,f,g) - ldr r8,[sp,#24+4] @ d.hi - adds r3,r3,r11 - adc r4,r4,r12 @ T += K[i] - adds r7,r7,r3 - adc r8,r8,r4 @ d += T - - and r9,r11,#0xff - teq r9,#148 - orreq r14,r14,#1 - - ldr r11,[sp,#8+0] @ b.lo - ldr r12,[sp,#16+0] @ c.lo - @ Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) - @ LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25 - @ HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25 - mov r9,r5,lsr#28 - mov r10,r6,lsr#28 - eor r9,r9,r6,lsl#4 - eor r10,r10,r5,lsl#4 - eor r9,r9,r6,lsr#2 - eor r10,r10,r5,lsr#2 - eor r9,r9,r5,lsl#30 - eor r10,r10,r6,lsl#30 - eor r9,r9,r6,lsr#7 - eor r10,r10,r5,lsr#7 - eor r9,r9,r5,lsl#25 - eor r10,r10,r6,lsl#25 @ Sigma0(a) - adds r3,r3,r9 - adc r4,r4,r10 @ T += Sigma0(a) - - and r9,r5,r11 - orr r5,r5,r11 - ldr r10,[sp,#8+4] @ b.hi - ldr r11,[sp,#16+4] @ c.hi - and r5,r5,r12 - orr r5,r5,r9 @ Maj(a,b,c).lo - and r12,r6,r10 - orr r6,r6,r10 - and r6,r6,r11 - orr r6,r6,r12 @ Maj(a,b,c).hi - adds r5,r5,r3 - adc r6,r6,r4 @ h += T - - sub sp,sp,#8 - add r14,r14,#8 - tst r14,#1 - beq .L00_15 - bic r14,r14,#1 - -.L16_79: - ldr r9,[sp,#184+0] - ldr r10,[sp,#184+4] - ldr r11,[sp,#80+0] - ldr r12,[sp,#80+4] - - @ sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) - @ LO lo>>1^hi<<31 ^ lo>>8^hi<<24 ^ lo>>7^hi<<25 - @ HI hi>>1^lo<<31 ^ hi>>8^lo<<24 ^ hi>>7 - mov r3,r9,lsr#1 - mov r4,r10,lsr#1 - eor r3,r3,r10,lsl#31 - eor r4,r4,r9,lsl#31 - eor r3,r3,r9,lsr#8 - eor r4,r4,r10,lsr#8 - eor r3,r3,r10,lsl#24 - eor r4,r4,r9,lsl#24 - eor r3,r3,r9,lsr#7 - eor r4,r4,r10,lsr#7 - eor r3,r3,r10,lsl#25 - - @ sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) - @ LO lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26 - @ HI hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6 - mov r9,r11,lsr#19 - mov r10,r12,lsr#19 - eor r9,r9,r12,lsl#13 - eor r10,r10,r11,lsl#13 - eor r9,r9,r12,lsr#29 - eor r10,r10,r11,lsr#29 - eor r9,r9,r11,lsl#3 - eor r10,r10,r12,lsl#3 - eor r9,r9,r11,lsr#6 - eor r10,r10,r12,lsr#6 - eor r9,r9,r12,lsl#26 - - ldr r11,[sp,#120+0] - ldr r12,[sp,#120+4] - adds r3,r3,r9 - adc r4,r4,r10 - - ldr r9,[sp,#192+0] - ldr r10,[sp,#192+4] - adds r3,r3,r11 - adc r4,r4,r12 - adds r3,r3,r9 - adc r4,r4,r10 - str r3,[sp,#64+0] - str r4,[sp,#64+4] - ldr r11,[sp,#56+0] @ h.lo - ldr r12,[sp,#56+4] @ h.hi - @ Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) - @ LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23 - @ HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23 - mov r9,r7,lsr#14 - mov r10,r8,lsr#14 - eor r9,r9,r8,lsl#18 - eor r10,r10,r7,lsl#18 - eor r9,r9,r7,lsr#18 - eor r10,r10,r8,lsr#18 - eor r9,r9,r8,lsl#14 - eor r10,r10,r7,lsl#14 - eor r9,r9,r8,lsr#9 - eor r10,r10,r7,lsr#9 - eor r9,r9,r7,lsl#23 - eor r10,r10,r8,lsl#23 @ Sigma1(e) - adds r3,r3,r9 - ldr r9,[sp,#40+0] @ f.lo - adc r4,r4,r10 @ T += Sigma1(e) - ldr r10,[sp,#40+4] @ f.hi - adds r3,r3,r11 - ldr r11,[sp,#48+0] @ g.lo - adc r4,r4,r12 @ T += h - ldr r12,[sp,#48+4] @ g.hi - - eor r9,r9,r11 - str r7,[sp,#32+0] - eor r10,r10,r12 - str r8,[sp,#32+4] - and r9,r9,r7 - str r5,[sp,#0+0] - and r10,r10,r8 - str r6,[sp,#0+4] - eor r9,r9,r11 - ldr r11,[r14,#4] @ K[i].lo - eor r10,r10,r12 @ Ch(e,f,g) - ldr r12,[r14,#0] @ K[i].hi - - adds r3,r3,r9 - ldr r7,[sp,#24+0] @ d.lo - adc r4,r4,r10 @ T += Ch(e,f,g) - ldr r8,[sp,#24+4] @ d.hi - adds r3,r3,r11 - adc r4,r4,r12 @ T += K[i] - adds r7,r7,r3 - adc r8,r8,r4 @ d += T - - and r9,r11,#0xff - teq r9,#23 - orreq r14,r14,#1 - - ldr r11,[sp,#8+0] @ b.lo - ldr r12,[sp,#16+0] @ c.lo - @ Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) - @ LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25 - @ HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25 - mov r9,r5,lsr#28 - mov r10,r6,lsr#28 - eor r9,r9,r6,lsl#4 - eor r10,r10,r5,lsl#4 - eor r9,r9,r6,lsr#2 - eor r10,r10,r5,lsr#2 - eor r9,r9,r5,lsl#30 - eor r10,r10,r6,lsl#30 - eor r9,r9,r6,lsr#7 - eor r10,r10,r5,lsr#7 - eor r9,r9,r5,lsl#25 - eor r10,r10,r6,lsl#25 @ Sigma0(a) - adds r3,r3,r9 - adc r4,r4,r10 @ T += Sigma0(a) - - and r9,r5,r11 - orr r5,r5,r11 - ldr r10,[sp,#8+4] @ b.hi - ldr r11,[sp,#16+4] @ c.hi - and r5,r5,r12 - orr r5,r5,r9 @ Maj(a,b,c).lo - and r12,r6,r10 - orr r6,r6,r10 - and r6,r6,r11 - orr r6,r6,r12 @ Maj(a,b,c).hi - adds r5,r5,r3 - adc r6,r6,r4 @ h += T - - sub sp,sp,#8 - add r14,r14,#8 - tst r14,#1 - beq .L16_79 - bic r14,r14,#1 - - ldr r3,[sp,#8+0] - ldr r4,[sp,#8+4] - ldr r9, [r0,#0+4] - ldr r10, [r0,#0+0] - ldr r11, [r0,#8+4] - ldr r12, [r0,#8+0] - adds r9,r5,r9 - adc r10,r6,r10 - adds r11,r3,r11 - adc r12,r4,r12 - str r9, [r0,#0+4] - str r10, [r0,#0+0] - str r11, [r0,#8+4] - str r12, [r0,#8+0] - - ldr r5,[sp,#16+0] - ldr r6,[sp,#16+4] - ldr r3,[sp,#24+0] - ldr r4,[sp,#24+4] - ldr r9, [r0,#16+4] - ldr r10, [r0,#16+0] - ldr r11, [r0,#24+4] - ldr r12, [r0,#24+0] - adds r9,r5,r9 - adc r10,r6,r10 - adds r11,r3,r11 - adc r12,r4,r12 - str r9, [r0,#16+4] - str r10, [r0,#16+0] - str r11, [r0,#24+4] - str r12, [r0,#24+0] - - ldr r3,[sp,#40+0] - ldr r4,[sp,#40+4] - ldr r9, [r0,#32+4] - ldr r10, [r0,#32+0] - ldr r11, [r0,#40+4] - ldr r12, [r0,#40+0] - adds r7,r7,r9 - adc r8,r8,r10 - adds r11,r3,r11 - adc r12,r4,r12 - str r7,[r0,#32+4] - str r8,[r0,#32+0] - str r11, [r0,#40+4] - str r12, [r0,#40+0] - - ldr r5,[sp,#48+0] - ldr r6,[sp,#48+4] - ldr r3,[sp,#56+0] - ldr r4,[sp,#56+4] - ldr r9, [r0,#48+4] - ldr r10, [r0,#48+0] - ldr r11, [r0,#56+4] - ldr r12, [r0,#56+0] - adds r9,r5,r9 - adc r10,r6,r10 - adds r11,r3,r11 - adc r12,r4,r12 - str r9, [r0,#48+4] - str r10, [r0,#48+0] - str r11, [r0,#56+4] - str r12, [r0,#56+0] - - add sp,sp,#640 - sub r14,r14,#640 - - teq r1,r2 - bne .Loop - - add sp,sp,#8*9 @ destroy frame - ldmia sp!,{r4-r12,lr} - tst lr,#1 - moveq pc,lr @ be binary compatible with V4, yet - .word 0xe12fff1e @ interoperable with Thumb ISA:-) -.size sha512_block_data_order,.-sha512_block_data_order -.asciz "SHA512 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>" -.align 2 diff --git a/app/openssl/crypto/sha/asm/sha512-ia64.pl b/app/openssl/crypto/sha/asm/sha512-ia64.pl deleted file mode 100755 index 1c6ce565..00000000 --- a/app/openssl/crypto/sha/asm/sha512-ia64.pl +++ /dev/null @@ -1,672 +0,0 @@ -#!/usr/bin/env perl -# -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== -# -# SHA256/512_Transform for Itanium. -# -# sha512_block runs in 1003 cycles on Itanium 2, which is almost 50% -# faster than gcc and >60%(!) faster than code generated by HP-UX -# compiler (yes, HP-UX is generating slower code, because unlike gcc, -# it failed to deploy "shift right pair," 'shrp' instruction, which -# substitutes for 64-bit rotate). -# -# 924 cycles long sha256_block outperforms gcc by over factor of 2(!) -# and HP-UX compiler - by >40% (yes, gcc won sha512_block, but lost -# this one big time). Note that "formally" 924 is about 100 cycles -# too much. I mean it's 64 32-bit rounds vs. 80 virtually identical -# 64-bit ones and 1003*64/80 gives 802. Extra cycles, 2 per round, -# are spent on extra work to provide for 32-bit rotations. 32-bit -# rotations are still handled by 'shrp' instruction and for this -# reason lower 32 bits are deposited to upper half of 64-bit register -# prior 'shrp' issue. And in order to minimize the amount of such -# operations, X[16] values are *maintained* with copies of lower -# halves in upper halves, which is why you'll spot such instructions -# as custom 'mux2', "parallel 32-bit add," 'padd4' and "parallel -# 32-bit unsigned right shift," 'pshr4.u' instructions here. -# -# Rules of engagement. -# -# There is only one integer shifter meaning that if I have two rotate, -# deposit or extract instructions in adjacent bundles, they shall -# split [at run-time if they have to]. But note that variable and -# parallel shifts are performed by multi-media ALU and *are* pairable -# with rotates [and alike]. On the backside MMALU is rather slow: it -# takes 2 extra cycles before the result of integer operation is -# available *to* MMALU and 2(*) extra cycles before the result of MM -# operation is available "back" *to* integer ALU, not to mention that -# MMALU itself has 2 cycles latency. However! I explicitly scheduled -# these MM instructions to avoid MM stalls, so that all these extra -# latencies get "hidden" in instruction-level parallelism. -# -# (*) 2 cycles on Itanium 1 and 1 cycle on Itanium 2. But I schedule -# for 2 in order to provide for best *overall* performance, -# because on Itanium 1 stall on MM result is accompanied by -# pipeline flush, which takes 6 cycles:-( -# -# Resulting performance numbers for 900MHz Itanium 2 system: -# -# The 'numbers' are in 1000s of bytes per second processed. -# type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes -# sha1(*) 6210.14k 20376.30k 52447.83k 85870.05k 105478.12k -# sha256 7476.45k 20572.05k 41538.34k 56062.29k 62093.18k -# sha512 4996.56k 20026.28k 47597.20k 85278.79k 111501.31k -# -# (*) SHA1 numbers are for HP-UX compiler and are presented purely -# for reference purposes. I bet it can improved too... -# -# To generate code, pass the file name with either 256 or 512 in its -# name and compiler flags. - -$output=shift; - -if ($output =~ /512.*\.[s|asm]/) { - $SZ=8; - $BITS=8*$SZ; - $LDW="ld8"; - $STW="st8"; - $ADD="add"; - $SHRU="shr.u"; - $TABLE="K512"; - $func="sha512_block_data_order"; - @Sigma0=(28,34,39); - @Sigma1=(14,18,41); - @sigma0=(1, 8, 7); - @sigma1=(19,61, 6); - $rounds=80; -} elsif ($output =~ /256.*\.[s|asm]/) { - $SZ=4; - $BITS=8*$SZ; - $LDW="ld4"; - $STW="st4"; - $ADD="padd4"; - $SHRU="pshr4.u"; - $TABLE="K256"; - $func="sha256_block_data_order"; - @Sigma0=( 2,13,22); - @Sigma1=( 6,11,25); - @sigma0=( 7,18, 3); - @sigma1=(17,19,10); - $rounds=64; -} else { die "nonsense $output"; } - -open STDOUT,">$output" || die "can't open $output: $!"; - -if ($^O eq "hpux") { - $ADDP="addp4"; - for (@ARGV) { $ADDP="add" if (/[\+DD|\-mlp]64/); } -} else { $ADDP="add"; } -for (@ARGV) { $big_endian=1 if (/\-DB_ENDIAN/); - $big_endian=0 if (/\-DL_ENDIAN/); } -if (!defined($big_endian)) - { $big_endian=(unpack('L',pack('N',1))==1); } - -$code=<<___; -.ident \"$output, version 1.1\" -.ident \"IA-64 ISA artwork by Andy Polyakov <appro\@fy.chalmers.se>\" -.explicit -.text - -pfssave=r2; -lcsave=r3; -prsave=r14; -K=r15; -A=r16; B=r17; C=r18; D=r19; -E=r20; F=r21; G=r22; H=r23; -T1=r24; T2=r25; -s0=r26; s1=r27; t0=r28; t1=r29; -Ktbl=r30; -ctx=r31; // 1st arg -input=r48; // 2nd arg -num=r49; // 3rd arg -sgm0=r50; sgm1=r51; // small constants -A_=r54; B_=r55; C_=r56; D_=r57; -E_=r58; F_=r59; G_=r60; H_=r61; - -// void $func (SHA_CTX *ctx, const void *in,size_t num[,int host]) -.global $func# -.proc $func# -.align 32 -$func: - .prologue - .save ar.pfs,pfssave -{ .mmi; alloc pfssave=ar.pfs,3,27,0,16 - $ADDP ctx=0,r32 // 1st arg - .save ar.lc,lcsave - mov lcsave=ar.lc } -{ .mmi; $ADDP input=0,r33 // 2nd arg - mov num=r34 // 3rd arg - .save pr,prsave - mov prsave=pr };; - - .body -{ .mib; add r8=0*$SZ,ctx - add r9=1*$SZ,ctx - brp.loop.imp .L_first16,.L_first16_end-16 } -{ .mib; add r10=2*$SZ,ctx - add r11=3*$SZ,ctx - brp.loop.imp .L_rest,.L_rest_end-16 };; - -// load A-H -.Lpic_point: -{ .mmi; $LDW A_=[r8],4*$SZ - $LDW B_=[r9],4*$SZ - mov Ktbl=ip } -{ .mmi; $LDW C_=[r10],4*$SZ - $LDW D_=[r11],4*$SZ - mov sgm0=$sigma0[2] };; -{ .mmi; $LDW E_=[r8] - $LDW F_=[r9] - add Ktbl=($TABLE#-.Lpic_point),Ktbl } -{ .mmi; $LDW G_=[r10] - $LDW H_=[r11] - cmp.ne p0,p16=0,r0 };; // used in sha256_block -___ -$code.=<<___ if ($BITS==64); -{ .mii; and r8=7,input - and input=~7,input;; - cmp.eq p9,p0=1,r8 } -{ .mmi; cmp.eq p10,p0=2,r8 - cmp.eq p11,p0=3,r8 - cmp.eq p12,p0=4,r8 } -{ .mmi; cmp.eq p13,p0=5,r8 - cmp.eq p14,p0=6,r8 - cmp.eq p15,p0=7,r8 };; -___ -$code.=<<___; -.L_outer: -.rotr X[16] -{ .mmi; mov A=A_ - mov B=B_ - mov ar.lc=14 } -{ .mmi; mov C=C_ - mov D=D_ - mov E=E_ } -{ .mmi; mov F=F_ - mov G=G_ - mov ar.ec=2 } -{ .mmi; ld1 X[15]=[input],$SZ // eliminated in 64-bit - mov H=H_ - mov sgm1=$sigma1[2] };; - -___ -$t0="t0", $t1="t1", $code.=<<___ if ($BITS==32); -.align 32 -.L_first16: -{ .mmi; add r9=1-$SZ,input - add r10=2-$SZ,input - add r11=3-$SZ,input };; -{ .mmi; ld1 r9=[r9] - ld1 r10=[r10] - dep.z $t1=E,32,32 } -{ .mmi; $LDW K=[Ktbl],$SZ - ld1 r11=[r11] - zxt4 E=E };; -{ .mii; or $t1=$t1,E - dep X[15]=X[15],r9,8,8 - dep r11=r10,r11,8,8 };; -{ .mmi; and T1=F,E - and T2=A,B - dep X[15]=X[15],r11,16,16 } -{ .mmi; andcm r8=G,E - and r9=A,C - mux2 $t0=A,0x44 };; // copy lower half to upper -{ .mmi; (p16) ld1 X[15-1]=[input],$SZ // prefetch - xor T1=T1,r8 // T1=((e & f) ^ (~e & g)) - _rotr r11=$t1,$Sigma1[0] } // ROTR(e,14) -{ .mib; and r10=B,C - xor T2=T2,r9 };; -___ -$t0="A", $t1="E", $code.=<<___ if ($BITS==64); -// in 64-bit mode I load whole X[16] at once and take care of alignment... -{ .mmi; add r8=1*$SZ,input - add r9=2*$SZ,input - add r10=3*$SZ,input };; -{ .mmb; $LDW X[15]=[input],4*$SZ - $LDW X[14]=[r8],4*$SZ -(p9) br.cond.dpnt.many .L1byte };; -{ .mmb; $LDW X[13]=[r9],4*$SZ - $LDW X[12]=[r10],4*$SZ -(p10) br.cond.dpnt.many .L2byte };; -{ .mmb; $LDW X[11]=[input],4*$SZ - $LDW X[10]=[r8],4*$SZ -(p11) br.cond.dpnt.many .L3byte };; -{ .mmb; $LDW X[ 9]=[r9],4*$SZ - $LDW X[ 8]=[r10],4*$SZ -(p12) br.cond.dpnt.many .L4byte };; -{ .mmb; $LDW X[ 7]=[input],4*$SZ - $LDW X[ 6]=[r8],4*$SZ -(p13) br.cond.dpnt.many .L5byte };; -{ .mmb; $LDW X[ 5]=[r9],4*$SZ - $LDW X[ 4]=[r10],4*$SZ -(p14) br.cond.dpnt.many .L6byte };; -{ .mmb; $LDW X[ 3]=[input],4*$SZ - $LDW X[ 2]=[r8],4*$SZ -(p15) br.cond.dpnt.many .L7byte };; -{ .mmb; $LDW X[ 1]=[r9],4*$SZ - $LDW X[ 0]=[r10],4*$SZ - br.many .L_first16 };; -.L1byte: -{ .mmi; $LDW X[13]=[r9],4*$SZ - $LDW X[12]=[r10],4*$SZ - shrp X[15]=X[15],X[14],56 };; -{ .mmi; $LDW X[11]=[input],4*$SZ - $LDW X[10]=[r8],4*$SZ - shrp X[14]=X[14],X[13],56 } -{ .mmi; $LDW X[ 9]=[r9],4*$SZ - $LDW X[ 8]=[r10],4*$SZ - shrp X[13]=X[13],X[12],56 };; -{ .mmi; $LDW X[ 7]=[input],4*$SZ - $LDW X[ 6]=[r8],4*$SZ - shrp X[12]=X[12],X[11],56 } -{ .mmi; $LDW X[ 5]=[r9],4*$SZ - $LDW X[ 4]=[r10],4*$SZ - shrp X[11]=X[11],X[10],56 };; -{ .mmi; $LDW X[ 3]=[input],4*$SZ - $LDW X[ 2]=[r8],4*$SZ - shrp X[10]=X[10],X[ 9],56 } -{ .mmi; $LDW X[ 1]=[r9],4*$SZ - $LDW X[ 0]=[r10],4*$SZ - shrp X[ 9]=X[ 9],X[ 8],56 };; -{ .mii; $LDW T1=[input] - shrp X[ 8]=X[ 8],X[ 7],56 - shrp X[ 7]=X[ 7],X[ 6],56 } -{ .mii; shrp X[ 6]=X[ 6],X[ 5],56 - shrp X[ 5]=X[ 5],X[ 4],56 };; -{ .mii; shrp X[ 4]=X[ 4],X[ 3],56 - shrp X[ 3]=X[ 3],X[ 2],56 } -{ .mii; shrp X[ 2]=X[ 2],X[ 1],56 - shrp X[ 1]=X[ 1],X[ 0],56 } -{ .mib; shrp X[ 0]=X[ 0],T1,56 - br.many .L_first16 };; -.L2byte: -{ .mmi; $LDW X[11]=[input],4*$SZ - $LDW X[10]=[r8],4*$SZ - shrp X[15]=X[15],X[14],48 } -{ .mmi; $LDW X[ 9]=[r9],4*$SZ - $LDW X[ 8]=[r10],4*$SZ - shrp X[14]=X[14],X[13],48 };; -{ .mmi; $LDW X[ 7]=[input],4*$SZ - $LDW X[ 6]=[r8],4*$SZ - shrp X[13]=X[13],X[12],48 } -{ .mmi; $LDW X[ 5]=[r9],4*$SZ - $LDW X[ 4]=[r10],4*$SZ - shrp X[12]=X[12],X[11],48 };; -{ .mmi; $LDW X[ 3]=[input],4*$SZ - $LDW X[ 2]=[r8],4*$SZ - shrp X[11]=X[11],X[10],48 } -{ .mmi; $LDW X[ 1]=[r9],4*$SZ - $LDW X[ 0]=[r10],4*$SZ - shrp X[10]=X[10],X[ 9],48 };; -{ .mii; $LDW T1=[input] - shrp X[ 9]=X[ 9],X[ 8],48 - shrp X[ 8]=X[ 8],X[ 7],48 } -{ .mii; shrp X[ 7]=X[ 7],X[ 6],48 - shrp X[ 6]=X[ 6],X[ 5],48 };; -{ .mii; shrp X[ 5]=X[ 5],X[ 4],48 - shrp X[ 4]=X[ 4],X[ 3],48 } -{ .mii; shrp X[ 3]=X[ 3],X[ 2],48 - shrp X[ 2]=X[ 2],X[ 1],48 } -{ .mii; shrp X[ 1]=X[ 1],X[ 0],48 - shrp X[ 0]=X[ 0],T1,48 } -{ .mfb; br.many .L_first16 };; -.L3byte: -{ .mmi; $LDW X[ 9]=[r9],4*$SZ - $LDW X[ 8]=[r10],4*$SZ - shrp X[15]=X[15],X[14],40 };; -{ .mmi; $LDW X[ 7]=[input],4*$SZ - $LDW X[ 6]=[r8],4*$SZ - shrp X[14]=X[14],X[13],40 } -{ .mmi; $LDW X[ 5]=[r9],4*$SZ - $LDW X[ 4]=[r10],4*$SZ - shrp X[13]=X[13],X[12],40 };; -{ .mmi; $LDW X[ 3]=[input],4*$SZ - $LDW X[ 2]=[r8],4*$SZ - shrp X[12]=X[12],X[11],40 } -{ .mmi; $LDW X[ 1]=[r9],4*$SZ - $LDW X[ 0]=[r10],4*$SZ - shrp X[11]=X[11],X[10],40 };; -{ .mii; $LDW T1=[input] - shrp X[10]=X[10],X[ 9],40 - shrp X[ 9]=X[ 9],X[ 8],40 } -{ .mii; shrp X[ 8]=X[ 8],X[ 7],40 - shrp X[ 7]=X[ 7],X[ 6],40 };; -{ .mii; shrp X[ 6]=X[ 6],X[ 5],40 - shrp X[ 5]=X[ 5],X[ 4],40 } -{ .mii; shrp X[ 4]=X[ 4],X[ 3],40 - shrp X[ 3]=X[ 3],X[ 2],40 } -{ .mii; shrp X[ 2]=X[ 2],X[ 1],40 - shrp X[ 1]=X[ 1],X[ 0],40 } -{ .mib; shrp X[ 0]=X[ 0],T1,40 - br.many .L_first16 };; -.L4byte: -{ .mmi; $LDW X[ 7]=[input],4*$SZ - $LDW X[ 6]=[r8],4*$SZ - shrp X[15]=X[15],X[14],32 } -{ .mmi; $LDW X[ 5]=[r9],4*$SZ - $LDW X[ 4]=[r10],4*$SZ - shrp X[14]=X[14],X[13],32 };; -{ .mmi; $LDW X[ 3]=[input],4*$SZ - $LDW X[ 2]=[r8],4*$SZ - shrp X[13]=X[13],X[12],32 } -{ .mmi; $LDW X[ 1]=[r9],4*$SZ - $LDW X[ 0]=[r10],4*$SZ - shrp X[12]=X[12],X[11],32 };; -{ .mii; $LDW T1=[input] - shrp X[11]=X[11],X[10],32 - shrp X[10]=X[10],X[ 9],32 } -{ .mii; shrp X[ 9]=X[ 9],X[ 8],32 - shrp X[ 8]=X[ 8],X[ 7],32 };; -{ .mii; shrp X[ 7]=X[ 7],X[ 6],32 - shrp X[ 6]=X[ 6],X[ 5],32 } -{ .mii; shrp X[ 5]=X[ 5],X[ 4],32 - shrp X[ 4]=X[ 4],X[ 3],32 } -{ .mii; shrp X[ 3]=X[ 3],X[ 2],32 - shrp X[ 2]=X[ 2],X[ 1],32 } -{ .mii; shrp X[ 1]=X[ 1],X[ 0],32 - shrp X[ 0]=X[ 0],T1,32 } -{ .mfb; br.many .L_first16 };; -.L5byte: -{ .mmi; $LDW X[ 5]=[r9],4*$SZ - $LDW X[ 4]=[r10],4*$SZ - shrp X[15]=X[15],X[14],24 };; -{ .mmi; $LDW X[ 3]=[input],4*$SZ - $LDW X[ 2]=[r8],4*$SZ - shrp X[14]=X[14],X[13],24 } -{ .mmi; $LDW X[ 1]=[r9],4*$SZ - $LDW X[ 0]=[r10],4*$SZ - shrp X[13]=X[13],X[12],24 };; -{ .mii; $LDW T1=[input] - shrp X[12]=X[12],X[11],24 - shrp X[11]=X[11],X[10],24 } -{ .mii; shrp X[10]=X[10],X[ 9],24 - shrp X[ 9]=X[ 9],X[ 8],24 };; -{ .mii; shrp X[ 8]=X[ 8],X[ 7],24 - shrp X[ 7]=X[ 7],X[ 6],24 } -{ .mii; shrp X[ 6]=X[ 6],X[ 5],24 - shrp X[ 5]=X[ 5],X[ 4],24 } -{ .mii; shrp X[ 4]=X[ 4],X[ 3],24 - shrp X[ 3]=X[ 3],X[ 2],24 } -{ .mii; shrp X[ 2]=X[ 2],X[ 1],24 - shrp X[ 1]=X[ 1],X[ 0],24 } -{ .mib; shrp X[ 0]=X[ 0],T1,24 - br.many .L_first16 };; -.L6byte: -{ .mmi; $LDW X[ 3]=[input],4*$SZ - $LDW X[ 2]=[r8],4*$SZ - shrp X[15]=X[15],X[14],16 } -{ .mmi; $LDW X[ 1]=[r9],4*$SZ - $LDW X[ 0]=[r10],4*$SZ - shrp X[14]=X[14],X[13],16 };; -{ .mii; $LDW T1=[input] - shrp X[13]=X[13],X[12],16 - shrp X[12]=X[12],X[11],16 } -{ .mii; shrp X[11]=X[11],X[10],16 - shrp X[10]=X[10],X[ 9],16 };; -{ .mii; shrp X[ 9]=X[ 9],X[ 8],16 - shrp X[ 8]=X[ 8],X[ 7],16 } -{ .mii; shrp X[ 7]=X[ 7],X[ 6],16 - shrp X[ 6]=X[ 6],X[ 5],16 } -{ .mii; shrp X[ 5]=X[ 5],X[ 4],16 - shrp X[ 4]=X[ 4],X[ 3],16 } -{ .mii; shrp X[ 3]=X[ 3],X[ 2],16 - shrp X[ 2]=X[ 2],X[ 1],16 } -{ .mii; shrp X[ 1]=X[ 1],X[ 0],16 - shrp X[ 0]=X[ 0],T1,16 } -{ .mfb; br.many .L_first16 };; -.L7byte: -{ .mmi; $LDW X[ 1]=[r9],4*$SZ - $LDW X[ 0]=[r10],4*$SZ - shrp X[15]=X[15],X[14],8 };; -{ .mii; $LDW T1=[input] - shrp X[14]=X[14],X[13],8 - shrp X[13]=X[13],X[12],8 } -{ .mii; shrp X[12]=X[12],X[11],8 - shrp X[11]=X[11],X[10],8 };; -{ .mii; shrp X[10]=X[10],X[ 9],8 - shrp X[ 9]=X[ 9],X[ 8],8 } -{ .mii; shrp X[ 8]=X[ 8],X[ 7],8 - shrp X[ 7]=X[ 7],X[ 6],8 } -{ .mii; shrp X[ 6]=X[ 6],X[ 5],8 - shrp X[ 5]=X[ 5],X[ 4],8 } -{ .mii; shrp X[ 4]=X[ 4],X[ 3],8 - shrp X[ 3]=X[ 3],X[ 2],8 } -{ .mii; shrp X[ 2]=X[ 2],X[ 1],8 - shrp X[ 1]=X[ 1],X[ 0],8 } -{ .mib; shrp X[ 0]=X[ 0],T1,8 - br.many .L_first16 };; - -.align 32 -.L_first16: -{ .mmi; $LDW K=[Ktbl],$SZ - and T1=F,E - and T2=A,B } -{ .mmi; //$LDW X[15]=[input],$SZ // X[i]=*input++ - andcm r8=G,E - and r9=A,C };; -{ .mmi; xor T1=T1,r8 //T1=((e & f) ^ (~e & g)) - and r10=B,C - _rotr r11=$t1,$Sigma1[0] } // ROTR(e,14) -{ .mmi; xor T2=T2,r9 - mux1 X[15]=X[15],\@rev };; // eliminated in big-endian -___ -$code.=<<___; -{ .mib; add T1=T1,H // T1=Ch(e,f,g)+h - _rotr r8=$t1,$Sigma1[1] } // ROTR(e,18) -{ .mib; xor T2=T2,r10 // T2=((a & b) ^ (a & c) ^ (b & c)) - mov H=G };; -{ .mib; xor r11=r8,r11 - _rotr r9=$t1,$Sigma1[2] } // ROTR(e,41) -{ .mib; mov G=F - mov F=E };; -{ .mib; xor r9=r9,r11 // r9=Sigma1(e) - _rotr r10=$t0,$Sigma0[0] } // ROTR(a,28) -{ .mib; add T1=T1,K // T1=Ch(e,f,g)+h+K512[i] - mov E=D };; -{ .mib; add T1=T1,r9 // T1+=Sigma1(e) - _rotr r11=$t0,$Sigma0[1] } // ROTR(a,34) -{ .mib; mov D=C - mov C=B };; -{ .mib; add T1=T1,X[15] // T1+=X[i] - _rotr r8=$t0,$Sigma0[2] } // ROTR(a,39) -{ .mib; xor r10=r10,r11 - mux2 X[15]=X[15],0x44 };; // eliminated in 64-bit -{ .mmi; xor r10=r8,r10 // r10=Sigma0(a) - mov B=A - add A=T1,T2 };; -{ .mib; add E=E,T1 - add A=A,r10 // T2=Maj(a,b,c)+Sigma0(a) - br.ctop.sptk .L_first16 };; -.L_first16_end: - -{ .mii; mov ar.lc=$rounds-17 - mov ar.ec=1 };; - -.align 32 -.L_rest: -.rotr X[16] -{ .mib; $LDW K=[Ktbl],$SZ - _rotr r8=X[15-1],$sigma0[0] } // ROTR(s0,1) -{ .mib; $ADD X[15]=X[15],X[15-9] // X[i&0xF]+=X[(i+9)&0xF] - $SHRU s0=X[15-1],sgm0 };; // s0=X[(i+1)&0xF]>>7 -{ .mib; and T1=F,E - _rotr r9=X[15-1],$sigma0[1] } // ROTR(s0,8) -{ .mib; andcm r10=G,E - $SHRU s1=X[15-14],sgm1 };; // s1=X[(i+14)&0xF]>>6 -{ .mmi; xor T1=T1,r10 // T1=((e & f) ^ (~e & g)) - xor r9=r8,r9 - _rotr r10=X[15-14],$sigma1[0] };;// ROTR(s1,19) -{ .mib; and T2=A,B - _rotr r11=X[15-14],$sigma1[1] }// ROTR(s1,61) -{ .mib; and r8=A,C };; -___ -$t0="t0", $t1="t1", $code.=<<___ if ($BITS==32); -// I adhere to mmi; in order to hold Itanium 1 back and avoid 6 cycle -// pipeline flush in last bundle. Note that even on Itanium2 the -// latter stalls for one clock cycle... -{ .mmi; xor s0=s0,r9 // s0=sigma0(X[(i+1)&0xF]) - dep.z $t1=E,32,32 } -{ .mmi; xor r10=r11,r10 - zxt4 E=E };; -{ .mmi; or $t1=$t1,E - xor s1=s1,r10 // s1=sigma1(X[(i+14)&0xF]) - mux2 $t0=A,0x44 };; // copy lower half to upper -{ .mmi; xor T2=T2,r8 - _rotr r9=$t1,$Sigma1[0] } // ROTR(e,14) -{ .mmi; and r10=B,C - add T1=T1,H // T1=Ch(e,f,g)+h - $ADD X[15]=X[15],s0 };; // X[i&0xF]+=sigma0(X[(i+1)&0xF]) -___ -$t0="A", $t1="E", $code.=<<___ if ($BITS==64); -{ .mib; xor s0=s0,r9 // s0=sigma0(X[(i+1)&0xF]) - _rotr r9=$t1,$Sigma1[0] } // ROTR(e,14) -{ .mib; xor r10=r11,r10 - xor T2=T2,r8 };; -{ .mib; xor s1=s1,r10 // s1=sigma1(X[(i+14)&0xF]) - add T1=T1,H } -{ .mib; and r10=B,C - $ADD X[15]=X[15],s0 };; // X[i&0xF]+=sigma0(X[(i+1)&0xF]) -___ -$code.=<<___; -{ .mmi; xor T2=T2,r10 // T2=((a & b) ^ (a & c) ^ (b & c)) - mov H=G - _rotr r8=$t1,$Sigma1[1] };; // ROTR(e,18) -{ .mmi; xor r11=r8,r9 - $ADD X[15]=X[15],s1 // X[i&0xF]+=sigma1(X[(i+14)&0xF]) - _rotr r9=$t1,$Sigma1[2] } // ROTR(e,41) -{ .mmi; mov G=F - mov F=E };; -{ .mib; xor r9=r9,r11 // r9=Sigma1(e) - _rotr r10=$t0,$Sigma0[0] } // ROTR(a,28) -{ .mib; add T1=T1,K // T1=Ch(e,f,g)+h+K512[i] - mov E=D };; -{ .mib; add T1=T1,r9 // T1+=Sigma1(e) - _rotr r11=$t0,$Sigma0[1] } // ROTR(a,34) -{ .mib; mov D=C - mov C=B };; -{ .mmi; add T1=T1,X[15] // T1+=X[i] - xor r10=r10,r11 - _rotr r8=$t0,$Sigma0[2] };; // ROTR(a,39) -{ .mmi; xor r10=r8,r10 // r10=Sigma0(a) - mov B=A - add A=T1,T2 };; -{ .mib; add E=E,T1 - add A=A,r10 // T2=Maj(a,b,c)+Sigma0(a) - br.ctop.sptk .L_rest };; -.L_rest_end: - -{ .mmi; add A_=A_,A - add B_=B_,B - add C_=C_,C } -{ .mmi; add D_=D_,D - add E_=E_,E - cmp.ltu p16,p0=1,num };; -{ .mmi; add F_=F_,F - add G_=G_,G - add H_=H_,H } -{ .mmb; add Ktbl=-$SZ*$rounds,Ktbl -(p16) add num=-1,num -(p16) br.dptk.many .L_outer };; - -{ .mib; add r8=0*$SZ,ctx - add r9=1*$SZ,ctx } -{ .mib; add r10=2*$SZ,ctx - add r11=3*$SZ,ctx };; -{ .mmi; $STW [r8]=A_,4*$SZ - $STW [r9]=B_,4*$SZ - mov ar.lc=lcsave } -{ .mmi; $STW [r10]=C_,4*$SZ - $STW [r11]=D_,4*$SZ - mov pr=prsave,0x1ffff };; -{ .mmb; $STW [r8]=E_ - $STW [r9]=F_ } -{ .mmb; $STW [r10]=G_ - $STW [r11]=H_ - br.ret.sptk.many b0 };; -.endp $func# -___ - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -$code =~ s/_rotr(\s+)([^=]+)=([^,]+),([0-9]+)/shrp$1$2=$3,$3,$4/gm; -if ($BITS==64) { - $code =~ s/mux2(\s+)\S+/nop.i$1 0x0/gm; - $code =~ s/mux1(\s+)\S+/nop.i$1 0x0/gm if ($big_endian); - $code =~ s/(shrp\s+X\[[^=]+)=([^,]+),([^,]+),([1-9]+)/$1=$3,$2,64-$4/gm - if (!$big_endian); - $code =~ s/ld1(\s+)X\[\S+/nop.m$1 0x0/gm; -} - -print $code; - -print<<___ if ($BITS==32); -.align 64 -.type K256#,\@object -K256: data4 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 - data4 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 - data4 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 - data4 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 - data4 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc - data4 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da - data4 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 - data4 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 - data4 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 - data4 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 - data4 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 - data4 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 - data4 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 - data4 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 - data4 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 - data4 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 -.size K256#,$SZ*$rounds -stringz "SHA256 block transform for IA64, CRYPTOGAMS by <appro\@openssl.org>" -___ -print<<___ if ($BITS==64); -.align 64 -.type K512#,\@object -K512: data8 0x428a2f98d728ae22,0x7137449123ef65cd - data8 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc - data8 0x3956c25bf348b538,0x59f111f1b605d019 - data8 0x923f82a4af194f9b,0xab1c5ed5da6d8118 - data8 0xd807aa98a3030242,0x12835b0145706fbe - data8 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2 - data8 0x72be5d74f27b896f,0x80deb1fe3b1696b1 - data8 0x9bdc06a725c71235,0xc19bf174cf692694 - data8 0xe49b69c19ef14ad2,0xefbe4786384f25e3 - data8 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65 - data8 0x2de92c6f592b0275,0x4a7484aa6ea6e483 - data8 0x5cb0a9dcbd41fbd4,0x76f988da831153b5 - data8 0x983e5152ee66dfab,0xa831c66d2db43210 - data8 0xb00327c898fb213f,0xbf597fc7beef0ee4 - data8 0xc6e00bf33da88fc2,0xd5a79147930aa725 - data8 0x06ca6351e003826f,0x142929670a0e6e70 - data8 0x27b70a8546d22ffc,0x2e1b21385c26c926 - data8 0x4d2c6dfc5ac42aed,0x53380d139d95b3df - data8 0x650a73548baf63de,0x766a0abb3c77b2a8 - data8 0x81c2c92e47edaee6,0x92722c851482353b - data8 0xa2bfe8a14cf10364,0xa81a664bbc423001 - data8 0xc24b8b70d0f89791,0xc76c51a30654be30 - data8 0xd192e819d6ef5218,0xd69906245565a910 - data8 0xf40e35855771202a,0x106aa07032bbd1b8 - data8 0x19a4c116b8d2d0c8,0x1e376c085141ab53 - data8 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8 - data8 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb - data8 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3 - data8 0x748f82ee5defb2fc,0x78a5636f43172f60 - data8 0x84c87814a1f0ab72,0x8cc702081a6439ec - data8 0x90befffa23631e28,0xa4506cebde82bde9 - data8 0xbef9a3f7b2c67915,0xc67178f2e372532b - data8 0xca273eceea26619c,0xd186b8c721c0c207 - data8 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178 - data8 0x06f067aa72176fba,0x0a637dc5a2c898a6 - data8 0x113f9804bef90dae,0x1b710b35131c471b - data8 0x28db77f523047d84,0x32caab7b40c72493 - data8 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c - data8 0x4cc5d4becb3e42b6,0x597f299cfc657e2a - data8 0x5fcb6fab3ad6faec,0x6c44198c4a475817 -.size K512#,$SZ*$rounds -stringz "SHA512 block transform for IA64, CRYPTOGAMS by <appro\@openssl.org>" -___ diff --git a/app/openssl/crypto/sha/asm/sha512-ppc.pl b/app/openssl/crypto/sha/asm/sha512-ppc.pl deleted file mode 100755 index 768a6a6f..00000000 --- a/app/openssl/crypto/sha/asm/sha512-ppc.pl +++ /dev/null @@ -1,462 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# I let hardware handle unaligned input, except on page boundaries -# (see below for details). Otherwise straightforward implementation -# with X vector in register bank. The module is big-endian [which is -# not big deal as there're no little-endian targets left around]. - -# sha256 | sha512 -# -m64 -m32 | -m64 -m32 -# --------------------------------------+----------------------- -# PPC970,gcc-4.0.0 +50% +38% | +40% +410%(*) -# Power6,xlc-7 +150% +90% | +100% +430%(*) -# -# (*) 64-bit code in 32-bit application context, which actually is -# on TODO list. It should be noted that for safe deployment in -# 32-bit *mutli-threaded* context asyncronous signals should be -# blocked upon entry to SHA512 block routine. This is because -# 32-bit signaling procedure invalidates upper halves of GPRs. -# Context switch procedure preserves them, but not signaling:-( - -# Second version is true multi-thread safe. Trouble with the original -# version was that it was using thread local storage pointer register. -# Well, it scrupulously preserved it, but the problem would arise the -# moment asynchronous signal was delivered and signal handler would -# dereference the TLS pointer. While it's never the case in openssl -# application or test suite, we have to respect this scenario and not -# use TLS pointer register. Alternative would be to require caller to -# block signals prior calling this routine. For the record, in 32-bit -# context R2 serves as TLS pointer, while in 64-bit context - R13. - -$flavour=shift; -$output =shift; - -if ($flavour =~ /64/) { - $SIZE_T=8; - $STU="stdu"; - $UCMP="cmpld"; - $SHL="sldi"; - $POP="ld"; - $PUSH="std"; -} elsif ($flavour =~ /32/) { - $SIZE_T=4; - $STU="stwu"; - $UCMP="cmplw"; - $SHL="slwi"; - $POP="lwz"; - $PUSH="stw"; -} else { die "nonsense $flavour"; } - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or -( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or -die "can't locate ppc-xlate.pl"; - -open STDOUT,"| $^X $xlate $flavour $output" || die "can't call $xlate: $!"; - -if ($output =~ /512/) { - $func="sha512_block_data_order"; - $SZ=8; - @Sigma0=(28,34,39); - @Sigma1=(14,18,41); - @sigma0=(1, 8, 7); - @sigma1=(19,61, 6); - $rounds=80; - $LD="ld"; - $ST="std"; - $ROR="rotrdi"; - $SHR="srdi"; -} else { - $func="sha256_block_data_order"; - $SZ=4; - @Sigma0=( 2,13,22); - @Sigma1=( 6,11,25); - @sigma0=( 7,18, 3); - @sigma1=(17,19,10); - $rounds=64; - $LD="lwz"; - $ST="stw"; - $ROR="rotrwi"; - $SHR="srwi"; -} - -$FRAME=32*$SIZE_T; - -$sp ="r1"; -$toc="r2"; -$ctx="r3"; # zapped by $a0 -$inp="r4"; # zapped by $a1 -$num="r5"; # zapped by $t0 - -$T ="r0"; -$a0 ="r3"; -$a1 ="r4"; -$t0 ="r5"; -$t1 ="r6"; -$Tbl="r7"; - -$A ="r8"; -$B ="r9"; -$C ="r10"; -$D ="r11"; -$E ="r12"; -$F ="r13"; $F="r2" if ($SIZE_T==8);# reassigned to exempt TLS pointer -$G ="r14"; -$H ="r15"; - -@V=($A,$B,$C,$D,$E,$F,$G,$H); -@X=("r16","r17","r18","r19","r20","r21","r22","r23", - "r24","r25","r26","r27","r28","r29","r30","r31"); - -$inp="r31"; # reassigned $inp! aliases with @X[15] - -sub ROUND_00_15 { -my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_; -$code.=<<___; - $LD $T,`$i*$SZ`($Tbl) - $ROR $a0,$e,$Sigma1[0] - $ROR $a1,$e,$Sigma1[1] - and $t0,$f,$e - andc $t1,$g,$e - add $T,$T,$h - xor $a0,$a0,$a1 - $ROR $a1,$a1,`$Sigma1[2]-$Sigma1[1]` - or $t0,$t0,$t1 ; Ch(e,f,g) - add $T,$T,@X[$i] - xor $a0,$a0,$a1 ; Sigma1(e) - add $T,$T,$t0 - add $T,$T,$a0 - - $ROR $a0,$a,$Sigma0[0] - $ROR $a1,$a,$Sigma0[1] - and $t0,$a,$b - and $t1,$a,$c - xor $a0,$a0,$a1 - $ROR $a1,$a1,`$Sigma0[2]-$Sigma0[1]` - xor $t0,$t0,$t1 - and $t1,$b,$c - xor $a0,$a0,$a1 ; Sigma0(a) - add $d,$d,$T - xor $t0,$t0,$t1 ; Maj(a,b,c) - add $h,$T,$a0 - add $h,$h,$t0 - -___ -} - -sub ROUND_16_xx { -my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_; -$i-=16; -$code.=<<___; - $ROR $a0,@X[($i+1)%16],$sigma0[0] - $ROR $a1,@X[($i+1)%16],$sigma0[1] - $ROR $t0,@X[($i+14)%16],$sigma1[0] - $ROR $t1,@X[($i+14)%16],$sigma1[1] - xor $a0,$a0,$a1 - $SHR $a1,@X[($i+1)%16],$sigma0[2] - xor $t0,$t0,$t1 - $SHR $t1,@X[($i+14)%16],$sigma1[2] - add @X[$i],@X[$i],@X[($i+9)%16] - xor $a0,$a0,$a1 ; sigma0(X[(i+1)&0x0f]) - xor $t0,$t0,$t1 ; sigma1(X[(i+14)&0x0f]) - add @X[$i],@X[$i],$a0 - add @X[$i],@X[$i],$t0 -___ -&ROUND_00_15($i,$a,$b,$c,$d,$e,$f,$g,$h); -} - -$code=<<___; -.machine "any" -.text - -.globl $func -.align 6 -$func: - mflr r0 - $STU $sp,`-($FRAME+16*$SZ)`($sp) - $SHL $num,$num,`log(16*$SZ)/log(2)` - - $PUSH $ctx,`$FRAME-$SIZE_T*22`($sp) - - $PUSH r0,`$FRAME-$SIZE_T*21`($sp) - $PUSH $toc,`$FRAME-$SIZE_T*20`($sp) - $PUSH r13,`$FRAME-$SIZE_T*19`($sp) - $PUSH r14,`$FRAME-$SIZE_T*18`($sp) - $PUSH r15,`$FRAME-$SIZE_T*17`($sp) - $PUSH r16,`$FRAME-$SIZE_T*16`($sp) - $PUSH r17,`$FRAME-$SIZE_T*15`($sp) - $PUSH r18,`$FRAME-$SIZE_T*14`($sp) - $PUSH r19,`$FRAME-$SIZE_T*13`($sp) - $PUSH r20,`$FRAME-$SIZE_T*12`($sp) - $PUSH r21,`$FRAME-$SIZE_T*11`($sp) - $PUSH r22,`$FRAME-$SIZE_T*10`($sp) - $PUSH r23,`$FRAME-$SIZE_T*9`($sp) - $PUSH r24,`$FRAME-$SIZE_T*8`($sp) - $PUSH r25,`$FRAME-$SIZE_T*7`($sp) - $PUSH r26,`$FRAME-$SIZE_T*6`($sp) - $PUSH r27,`$FRAME-$SIZE_T*5`($sp) - $PUSH r28,`$FRAME-$SIZE_T*4`($sp) - $PUSH r29,`$FRAME-$SIZE_T*3`($sp) - $PUSH r30,`$FRAME-$SIZE_T*2`($sp) - $PUSH r31,`$FRAME-$SIZE_T*1`($sp) - - $LD $A,`0*$SZ`($ctx) - mr $inp,r4 ; incarnate $inp - $LD $B,`1*$SZ`($ctx) - $LD $C,`2*$SZ`($ctx) - $LD $D,`3*$SZ`($ctx) - $LD $E,`4*$SZ`($ctx) - $LD $F,`5*$SZ`($ctx) - $LD $G,`6*$SZ`($ctx) - $LD $H,`7*$SZ`($ctx) - - b LPICmeup -LPICedup: - andi. r0,$inp,3 - bne Lunaligned -Laligned: - add $num,$inp,$num - $PUSH $num,`$FRAME-$SIZE_T*24`($sp) ; end pointer - $PUSH $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer - bl Lsha2_block_private -Ldone: - $POP r0,`$FRAME-$SIZE_T*21`($sp) - $POP $toc,`$FRAME-$SIZE_T*20`($sp) - $POP r13,`$FRAME-$SIZE_T*19`($sp) - $POP r14,`$FRAME-$SIZE_T*18`($sp) - $POP r15,`$FRAME-$SIZE_T*17`($sp) - $POP r16,`$FRAME-$SIZE_T*16`($sp) - $POP r17,`$FRAME-$SIZE_T*15`($sp) - $POP r18,`$FRAME-$SIZE_T*14`($sp) - $POP r19,`$FRAME-$SIZE_T*13`($sp) - $POP r20,`$FRAME-$SIZE_T*12`($sp) - $POP r21,`$FRAME-$SIZE_T*11`($sp) - $POP r22,`$FRAME-$SIZE_T*10`($sp) - $POP r23,`$FRAME-$SIZE_T*9`($sp) - $POP r24,`$FRAME-$SIZE_T*8`($sp) - $POP r25,`$FRAME-$SIZE_T*7`($sp) - $POP r26,`$FRAME-$SIZE_T*6`($sp) - $POP r27,`$FRAME-$SIZE_T*5`($sp) - $POP r28,`$FRAME-$SIZE_T*4`($sp) - $POP r29,`$FRAME-$SIZE_T*3`($sp) - $POP r30,`$FRAME-$SIZE_T*2`($sp) - $POP r31,`$FRAME-$SIZE_T*1`($sp) - mtlr r0 - addi $sp,$sp,`$FRAME+16*$SZ` - blr -___ - -# PowerPC specification allows an implementation to be ill-behaved -# upon unaligned access which crosses page boundary. "Better safe -# than sorry" principle makes me treat it specially. But I don't -# look for particular offending word, but rather for the input -# block which crosses the boundary. Once found that block is aligned -# and hashed separately... -$code.=<<___; -.align 4 -Lunaligned: - subfic $t1,$inp,4096 - andi. $t1,$t1,`4096-16*$SZ` ; distance to closest page boundary - beq Lcross_page - $UCMP $num,$t1 - ble- Laligned ; didn't cross the page boundary - subfc $num,$t1,$num - add $t1,$inp,$t1 - $PUSH $num,`$FRAME-$SIZE_T*25`($sp) ; save real remaining num - $PUSH $t1,`$FRAME-$SIZE_T*24`($sp) ; intermediate end pointer - $PUSH $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer - bl Lsha2_block_private - ; $inp equals to the intermediate end pointer here - $POP $num,`$FRAME-$SIZE_T*25`($sp) ; restore real remaining num -Lcross_page: - li $t1,`16*$SZ/4` - mtctr $t1 - addi r20,$sp,$FRAME ; aligned spot below the frame -Lmemcpy: - lbz r16,0($inp) - lbz r17,1($inp) - lbz r18,2($inp) - lbz r19,3($inp) - addi $inp,$inp,4 - stb r16,0(r20) - stb r17,1(r20) - stb r18,2(r20) - stb r19,3(r20) - addi r20,r20,4 - bdnz Lmemcpy - - $PUSH $inp,`$FRAME-$SIZE_T*26`($sp) ; save real inp - addi $t1,$sp,`$FRAME+16*$SZ` ; fictitious end pointer - addi $inp,$sp,$FRAME ; fictitious inp pointer - $PUSH $num,`$FRAME-$SIZE_T*25`($sp) ; save real num - $PUSH $t1,`$FRAME-$SIZE_T*24`($sp) ; end pointer - $PUSH $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer - bl Lsha2_block_private - $POP $inp,`$FRAME-$SIZE_T*26`($sp) ; restore real inp - $POP $num,`$FRAME-$SIZE_T*25`($sp) ; restore real num - addic. $num,$num,`-16*$SZ` ; num-- - bne- Lunaligned - b Ldone -___ - -$code.=<<___; -.align 4 -Lsha2_block_private: -___ -for($i=0;$i<16;$i++) { -$code.=<<___ if ($SZ==4); - lwz @X[$i],`$i*$SZ`($inp) -___ -# 64-bit loads are split to 2x32-bit ones, as CPU can't handle -# unaligned 64-bit loads, only 32-bit ones... -$code.=<<___ if ($SZ==8); - lwz $t0,`$i*$SZ`($inp) - lwz @X[$i],`$i*$SZ+4`($inp) - insrdi @X[$i],$t0,32,0 -___ - &ROUND_00_15($i,@V); - unshift(@V,pop(@V)); -} -$code.=<<___; - li $T,`$rounds/16-1` - mtctr $T -.align 4 -Lrounds: - addi $Tbl,$Tbl,`16*$SZ` -___ -for(;$i<32;$i++) { - &ROUND_16_xx($i,@V); - unshift(@V,pop(@V)); -} -$code.=<<___; - bdnz- Lrounds - - $POP $ctx,`$FRAME-$SIZE_T*22`($sp) - $POP $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer - $POP $num,`$FRAME-$SIZE_T*24`($sp) ; end pointer - subi $Tbl,$Tbl,`($rounds-16)*$SZ` ; rewind Tbl - - $LD r16,`0*$SZ`($ctx) - $LD r17,`1*$SZ`($ctx) - $LD r18,`2*$SZ`($ctx) - $LD r19,`3*$SZ`($ctx) - $LD r20,`4*$SZ`($ctx) - $LD r21,`5*$SZ`($ctx) - $LD r22,`6*$SZ`($ctx) - addi $inp,$inp,`16*$SZ` ; advance inp - $LD r23,`7*$SZ`($ctx) - add $A,$A,r16 - add $B,$B,r17 - $PUSH $inp,`$FRAME-$SIZE_T*23`($sp) - add $C,$C,r18 - $ST $A,`0*$SZ`($ctx) - add $D,$D,r19 - $ST $B,`1*$SZ`($ctx) - add $E,$E,r20 - $ST $C,`2*$SZ`($ctx) - add $F,$F,r21 - $ST $D,`3*$SZ`($ctx) - add $G,$G,r22 - $ST $E,`4*$SZ`($ctx) - add $H,$H,r23 - $ST $F,`5*$SZ`($ctx) - $ST $G,`6*$SZ`($ctx) - $UCMP $inp,$num - $ST $H,`7*$SZ`($ctx) - bne Lsha2_block_private - blr -___ - -# Ugly hack here, because PPC assembler syntax seem to vary too -# much from platforms to platform... -$code.=<<___; -.align 6 -LPICmeup: - bl LPIC - addi $Tbl,$Tbl,`64-4` ; "distance" between . and last nop - b LPICedup - nop - nop - nop - nop - nop -LPIC: mflr $Tbl - blr - nop - nop - nop - nop - nop - nop -___ -$code.=<<___ if ($SZ==8); - .long 0x428a2f98,0xd728ae22,0x71374491,0x23ef65cd - .long 0xb5c0fbcf,0xec4d3b2f,0xe9b5dba5,0x8189dbbc - .long 0x3956c25b,0xf348b538,0x59f111f1,0xb605d019 - .long 0x923f82a4,0xaf194f9b,0xab1c5ed5,0xda6d8118 - .long 0xd807aa98,0xa3030242,0x12835b01,0x45706fbe - .long 0x243185be,0x4ee4b28c,0x550c7dc3,0xd5ffb4e2 - .long 0x72be5d74,0xf27b896f,0x80deb1fe,0x3b1696b1 - .long 0x9bdc06a7,0x25c71235,0xc19bf174,0xcf692694 - .long 0xe49b69c1,0x9ef14ad2,0xefbe4786,0x384f25e3 - .long 0x0fc19dc6,0x8b8cd5b5,0x240ca1cc,0x77ac9c65 - .long 0x2de92c6f,0x592b0275,0x4a7484aa,0x6ea6e483 - .long 0x5cb0a9dc,0xbd41fbd4,0x76f988da,0x831153b5 - .long 0x983e5152,0xee66dfab,0xa831c66d,0x2db43210 - .long 0xb00327c8,0x98fb213f,0xbf597fc7,0xbeef0ee4 - .long 0xc6e00bf3,0x3da88fc2,0xd5a79147,0x930aa725 - .long 0x06ca6351,0xe003826f,0x14292967,0x0a0e6e70 - .long 0x27b70a85,0x46d22ffc,0x2e1b2138,0x5c26c926 - .long 0x4d2c6dfc,0x5ac42aed,0x53380d13,0x9d95b3df - .long 0x650a7354,0x8baf63de,0x766a0abb,0x3c77b2a8 - .long 0x81c2c92e,0x47edaee6,0x92722c85,0x1482353b - .long 0xa2bfe8a1,0x4cf10364,0xa81a664b,0xbc423001 - .long 0xc24b8b70,0xd0f89791,0xc76c51a3,0x0654be30 - .long 0xd192e819,0xd6ef5218,0xd6990624,0x5565a910 - .long 0xf40e3585,0x5771202a,0x106aa070,0x32bbd1b8 - .long 0x19a4c116,0xb8d2d0c8,0x1e376c08,0x5141ab53 - .long 0x2748774c,0xdf8eeb99,0x34b0bcb5,0xe19b48a8 - .long 0x391c0cb3,0xc5c95a63,0x4ed8aa4a,0xe3418acb - .long 0x5b9cca4f,0x7763e373,0x682e6ff3,0xd6b2b8a3 - .long 0x748f82ee,0x5defb2fc,0x78a5636f,0x43172f60 - .long 0x84c87814,0xa1f0ab72,0x8cc70208,0x1a6439ec - .long 0x90befffa,0x23631e28,0xa4506ceb,0xde82bde9 - .long 0xbef9a3f7,0xb2c67915,0xc67178f2,0xe372532b - .long 0xca273ece,0xea26619c,0xd186b8c7,0x21c0c207 - .long 0xeada7dd6,0xcde0eb1e,0xf57d4f7f,0xee6ed178 - .long 0x06f067aa,0x72176fba,0x0a637dc5,0xa2c898a6 - .long 0x113f9804,0xbef90dae,0x1b710b35,0x131c471b - .long 0x28db77f5,0x23047d84,0x32caab7b,0x40c72493 - .long 0x3c9ebe0a,0x15c9bebc,0x431d67c4,0x9c100d4c - .long 0x4cc5d4be,0xcb3e42b6,0x597f299c,0xfc657e2a - .long 0x5fcb6fab,0x3ad6faec,0x6c44198c,0x4a475817 -___ -$code.=<<___ if ($SZ==4); - .long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 - .long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 - .long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 - .long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 - .long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc - .long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da - .long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 - .long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 - .long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 - .long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 - .long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 - .long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 - .long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 - .long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 - .long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 - .long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 -___ - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -print $code; -close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha512-s390x.pl b/app/openssl/crypto/sha/asm/sha512-s390x.pl deleted file mode 100644 index e7ef2d5a..00000000 --- a/app/openssl/crypto/sha/asm/sha512-s390x.pl +++ /dev/null @@ -1,301 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# SHA256/512 block procedures for s390x. - -# April 2007. -# -# sha256_block_data_order is reportedly >3 times faster than gcc 3.3 -# generated code (must be a bug in compiler, as improvement is -# "pathologically" high, in particular in comparison to other SHA -# modules). But the real twist is that it detects if hardware support -# for SHA256 is available and in such case utilizes it. Then the -# performance can reach >6.5x of assembler one for larger chunks. -# -# sha512_block_data_order is ~70% faster than gcc 3.3 generated code. - -# January 2009. -# -# Add support for hardware SHA512 and reschedule instructions to -# favour dual-issue z10 pipeline. Hardware SHA256/512 is ~4.7x faster -# than software. - -$t0="%r0"; -$t1="%r1"; -$ctx="%r2"; $t2="%r2"; -$inp="%r3"; -$len="%r4"; # used as index in inner loop - -$A="%r5"; -$B="%r6"; -$C="%r7"; -$D="%r8"; -$E="%r9"; -$F="%r10"; -$G="%r11"; -$H="%r12"; @V=($A,$B,$C,$D,$E,$F,$G,$H); -$tbl="%r13"; -$T1="%r14"; -$sp="%r15"; - -$output=shift; -open STDOUT,">$output"; - -if ($output =~ /512/) { - $label="512"; - $SZ=8; - $LD="lg"; # load from memory - $ST="stg"; # store to memory - $ADD="alg"; # add with memory operand - $ROT="rllg"; # rotate left - $SHR="srlg"; # logical right shift [see even at the end] - @Sigma0=(25,30,36); - @Sigma1=(23,46,50); - @sigma0=(56,63, 7); - @sigma1=( 3,45, 6); - $rounds=80; - $kimdfunc=3; # 0 means unknown/unsupported/unimplemented/disabled -} else { - $label="256"; - $SZ=4; - $LD="llgf"; # load from memory - $ST="st"; # store to memory - $ADD="al"; # add with memory operand - $ROT="rll"; # rotate left - $SHR="srl"; # logical right shift - @Sigma0=(10,19,30); - @Sigma1=( 7,21,26); - @sigma0=(14,25, 3); - @sigma1=(13,15,10); - $rounds=64; - $kimdfunc=2; # magic function code for kimd instruction -} -$Func="sha${label}_block_data_order"; -$Table="K${label}"; -$frame=160+16*$SZ; - -sub BODY_00_15 { -my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; - -$code.=<<___ if ($i<16); - $LD $T1,`$i*$SZ`($inp) ### $i -___ -$code.=<<___; - $ROT $t0,$e,$Sigma1[0] - $ROT $t1,$e,$Sigma1[1] - lgr $t2,$f - xgr $t0,$t1 - $ROT $t1,$t1,`$Sigma1[2]-$Sigma1[1]` - xgr $t2,$g - $ST $T1,`160+$SZ*($i%16)`($sp) - xgr $t0,$t1 # Sigma1(e) - la $T1,0($T1,$h) # T1+=h - ngr $t2,$e - lgr $t1,$a - algr $T1,$t0 # T1+=Sigma1(e) - $ROT $h,$a,$Sigma0[0] - xgr $t2,$g # Ch(e,f,g) - $ADD $T1,`$i*$SZ`($len,$tbl) # T1+=K[i] - $ROT $t0,$a,$Sigma0[1] - algr $T1,$t2 # T1+=Ch(e,f,g) - ogr $t1,$b - xgr $h,$t0 - lgr $t2,$a - ngr $t1,$c - $ROT $t0,$t0,`$Sigma0[2]-$Sigma0[1]` - xgr $h,$t0 # h=Sigma0(a) - ngr $t2,$b - algr $h,$T1 # h+=T1 - ogr $t2,$t1 # Maj(a,b,c) - la $d,0($d,$T1) # d+=T1 - algr $h,$t2 # h+=Maj(a,b,c) -___ -} - -sub BODY_16_XX { -my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; - -$code.=<<___; - $LD $T1,`160+$SZ*(($i+1)%16)`($sp) ### $i - $LD $t1,`160+$SZ*(($i+14)%16)`($sp) - $ROT $t0,$T1,$sigma0[0] - $SHR $T1,$sigma0[2] - $ROT $t2,$t0,`$sigma0[1]-$sigma0[0]` - xgr $T1,$t0 - $ROT $t0,$t1,$sigma1[0] - xgr $T1,$t2 # sigma0(X[i+1]) - $SHR $t1,$sigma1[2] - $ADD $T1,`160+$SZ*($i%16)`($sp) # +=X[i] - xgr $t1,$t0 - $ROT $t0,$t0,`$sigma1[1]-$sigma1[0]` - $ADD $T1,`160+$SZ*(($i+9)%16)`($sp) # +=X[i+9] - xgr $t1,$t0 # sigma1(X[i+14]) - algr $T1,$t1 # +=sigma1(X[i+14]) -___ - &BODY_00_15(@_); -} - -$code.=<<___; -.text -.align 64 -.type $Table,\@object -$Table: -___ -$code.=<<___ if ($SZ==4); - .long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 - .long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 - .long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 - .long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 - .long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc - .long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da - .long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 - .long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 - .long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 - .long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 - .long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 - .long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 - .long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 - .long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 - .long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 - .long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 -___ -$code.=<<___ if ($SZ==8); - .quad 0x428a2f98d728ae22,0x7137449123ef65cd - .quad 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc - .quad 0x3956c25bf348b538,0x59f111f1b605d019 - .quad 0x923f82a4af194f9b,0xab1c5ed5da6d8118 - .quad 0xd807aa98a3030242,0x12835b0145706fbe - .quad 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2 - .quad 0x72be5d74f27b896f,0x80deb1fe3b1696b1 - .quad 0x9bdc06a725c71235,0xc19bf174cf692694 - .quad 0xe49b69c19ef14ad2,0xefbe4786384f25e3 - .quad 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65 - .quad 0x2de92c6f592b0275,0x4a7484aa6ea6e483 - .quad 0x5cb0a9dcbd41fbd4,0x76f988da831153b5 - .quad 0x983e5152ee66dfab,0xa831c66d2db43210 - .quad 0xb00327c898fb213f,0xbf597fc7beef0ee4 - .quad 0xc6e00bf33da88fc2,0xd5a79147930aa725 - .quad 0x06ca6351e003826f,0x142929670a0e6e70 - .quad 0x27b70a8546d22ffc,0x2e1b21385c26c926 - .quad 0x4d2c6dfc5ac42aed,0x53380d139d95b3df - .quad 0x650a73548baf63de,0x766a0abb3c77b2a8 - .quad 0x81c2c92e47edaee6,0x92722c851482353b - .quad 0xa2bfe8a14cf10364,0xa81a664bbc423001 - .quad 0xc24b8b70d0f89791,0xc76c51a30654be30 - .quad 0xd192e819d6ef5218,0xd69906245565a910 - .quad 0xf40e35855771202a,0x106aa07032bbd1b8 - .quad 0x19a4c116b8d2d0c8,0x1e376c085141ab53 - .quad 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8 - .quad 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb - .quad 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3 - .quad 0x748f82ee5defb2fc,0x78a5636f43172f60 - .quad 0x84c87814a1f0ab72,0x8cc702081a6439ec - .quad 0x90befffa23631e28,0xa4506cebde82bde9 - .quad 0xbef9a3f7b2c67915,0xc67178f2e372532b - .quad 0xca273eceea26619c,0xd186b8c721c0c207 - .quad 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178 - .quad 0x06f067aa72176fba,0x0a637dc5a2c898a6 - .quad 0x113f9804bef90dae,0x1b710b35131c471b - .quad 0x28db77f523047d84,0x32caab7b40c72493 - .quad 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c - .quad 0x4cc5d4becb3e42b6,0x597f299cfc657e2a - .quad 0x5fcb6fab3ad6faec,0x6c44198c4a475817 -___ -$code.=<<___; -.size $Table,.-$Table -.globl $Func -.type $Func,\@function -$Func: -___ -$code.=<<___ if ($kimdfunc); - larl %r1,OPENSSL_s390xcap_P - lg %r0,0(%r1) - tmhl %r0,0x4000 # check for message-security assist - jz .Lsoftware - lghi %r0,0 - la %r1,16($sp) - .long 0xb93e0002 # kimd %r0,%r2 - lg %r0,16($sp) - tmhh %r0,`0x8000>>$kimdfunc` - jz .Lsoftware - lghi %r0,$kimdfunc - lgr %r1,$ctx - lgr %r2,$inp - sllg %r3,$len,`log(16*$SZ)/log(2)` - .long 0xb93e0002 # kimd %r0,%r2 - brc 1,.-4 # pay attention to "partial completion" - br %r14 -.align 16 -.Lsoftware: -___ -$code.=<<___; - sllg $len,$len,`log(16*$SZ)/log(2)` - lghi %r1,-$frame - agr $len,$inp - stmg $ctx,%r15,16($sp) - lgr %r0,$sp - la $sp,0(%r1,$sp) - stg %r0,0($sp) - - larl $tbl,$Table - $LD $A,`0*$SZ`($ctx) - $LD $B,`1*$SZ`($ctx) - $LD $C,`2*$SZ`($ctx) - $LD $D,`3*$SZ`($ctx) - $LD $E,`4*$SZ`($ctx) - $LD $F,`5*$SZ`($ctx) - $LD $G,`6*$SZ`($ctx) - $LD $H,`7*$SZ`($ctx) - -.Lloop: - lghi $len,0 -___ -for ($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } -$code.=".Lrounds_16_xx:\n"; -for (;$i<32;$i++) { &BODY_16_XX($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; - aghi $len,`16*$SZ` - lghi $t0,`($rounds-16)*$SZ` - clgr $len,$t0 - jne .Lrounds_16_xx - - lg $ctx,`$frame+16`($sp) - la $inp,`16*$SZ`($inp) - $ADD $A,`0*$SZ`($ctx) - $ADD $B,`1*$SZ`($ctx) - $ADD $C,`2*$SZ`($ctx) - $ADD $D,`3*$SZ`($ctx) - $ADD $E,`4*$SZ`($ctx) - $ADD $F,`5*$SZ`($ctx) - $ADD $G,`6*$SZ`($ctx) - $ADD $H,`7*$SZ`($ctx) - $ST $A,`0*$SZ`($ctx) - $ST $B,`1*$SZ`($ctx) - $ST $C,`2*$SZ`($ctx) - $ST $D,`3*$SZ`($ctx) - $ST $E,`4*$SZ`($ctx) - $ST $F,`5*$SZ`($ctx) - $ST $G,`6*$SZ`($ctx) - $ST $H,`7*$SZ`($ctx) - clg $inp,`$frame+32`($sp) - jne .Lloop - - lmg %r6,%r15,`$frame+48`($sp) - br %r14 -.size $Func,.-$Func -.string "SHA${label} block transform for s390x, CRYPTOGAMS by <appro\@openssl.org>" -.comm OPENSSL_s390xcap_P,8,8 -___ - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -# unlike 32-bit shift 64-bit one takes three arguments -$code =~ s/(srlg\s+)(%r[0-9]+),/$1$2,$2,/gm; - -print $code; -close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha512-sparcv9.pl b/app/openssl/crypto/sha/asm/sha512-sparcv9.pl deleted file mode 100644 index ec5d7813..00000000 --- a/app/openssl/crypto/sha/asm/sha512-sparcv9.pl +++ /dev/null @@ -1,594 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# SHA256 performance improvement over compiler generated code varies -# from 40% for Sun C [32-bit build] to 70% for gcc [3.3, 64-bit -# build]. Just like in SHA1 module I aim to ensure scalability on -# UltraSPARC T1 by packing X[16] to 8 64-bit registers. - -# SHA512 on pre-T1 UltraSPARC. -# -# Performance is >75% better than 64-bit code generated by Sun C and -# over 2x than 32-bit code. X[16] resides on stack, but access to it -# is scheduled for L2 latency and staged through 32 least significant -# bits of %l0-%l7. The latter is done to achieve 32-/64-bit ABI -# duality. Nevetheless it's ~40% faster than SHA256, which is pretty -# good [optimal coefficient is 50%]. -# -# SHA512 on UltraSPARC T1. -# -# It's not any faster than 64-bit code generated by Sun C 5.8. This is -# because 64-bit code generator has the advantage of using 64-bit -# loads(*) to access X[16], which I consciously traded for 32-/64-bit -# ABI duality [as per above]. But it surpasses 32-bit Sun C generated -# code by 60%, not to mention that it doesn't suffer from severe decay -# when running 4 times physical cores threads and that it leaves gcc -# [3.4] behind by over 4x factor! If compared to SHA256, single thread -# performance is only 10% better, but overall throughput for maximum -# amount of threads for given CPU exceeds corresponding one of SHA256 -# by 30% [again, optimal coefficient is 50%]. -# -# (*) Unlike pre-T1 UltraSPARC loads on T1 are executed strictly -# in-order, i.e. load instruction has to complete prior next -# instruction in given thread is executed, even if the latter is -# not dependent on load result! This means that on T1 two 32-bit -# loads are always slower than one 64-bit load. Once again this -# is unlike pre-T1 UltraSPARC, where, if scheduled appropriately, -# 2x32-bit loads can be as fast as 1x64-bit ones. - -$bits=32; -for (@ARGV) { $bits=64 if (/\-m64/ || /\-xarch\=v9/); } -if ($bits==64) { $bias=2047; $frame=192; } -else { $bias=0; $frame=112; } - -$output=shift; -open STDOUT,">$output"; - -if ($output =~ /512/) { - $label="512"; - $SZ=8; - $LD="ldx"; # load from memory - $ST="stx"; # store to memory - $SLL="sllx"; # shift left logical - $SRL="srlx"; # shift right logical - @Sigma0=(28,34,39); - @Sigma1=(14,18,41); - @sigma0=( 7, 1, 8); # right shift first - @sigma1=( 6,19,61); # right shift first - $lastK=0x817; - $rounds=80; - $align=4; - - $locals=16*$SZ; # X[16] - - $A="%o0"; - $B="%o1"; - $C="%o2"; - $D="%o3"; - $E="%o4"; - $F="%o5"; - $G="%g1"; - $H="%o7"; - @V=($A,$B,$C,$D,$E,$F,$G,$H); -} else { - $label="256"; - $SZ=4; - $LD="ld"; # load from memory - $ST="st"; # store to memory - $SLL="sll"; # shift left logical - $SRL="srl"; # shift right logical - @Sigma0=( 2,13,22); - @Sigma1=( 6,11,25); - @sigma0=( 3, 7,18); # right shift first - @sigma1=(10,17,19); # right shift first - $lastK=0x8f2; - $rounds=64; - $align=8; - - $locals=0; # X[16] is register resident - @X=("%o0","%o1","%o2","%o3","%o4","%o5","%g1","%o7"); - - $A="%l0"; - $B="%l1"; - $C="%l2"; - $D="%l3"; - $E="%l4"; - $F="%l5"; - $G="%l6"; - $H="%l7"; - @V=($A,$B,$C,$D,$E,$F,$G,$H); -} -$T1="%g2"; -$tmp0="%g3"; -$tmp1="%g4"; -$tmp2="%g5"; - -$ctx="%i0"; -$inp="%i1"; -$len="%i2"; -$Ktbl="%i3"; -$tmp31="%i4"; -$tmp32="%i5"; - -########### SHA256 -$Xload = sub { -my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_; - - if ($i==0) { -$code.=<<___; - ldx [$inp+0],@X[0] - ldx [$inp+16],@X[2] - ldx [$inp+32],@X[4] - ldx [$inp+48],@X[6] - ldx [$inp+8],@X[1] - ldx [$inp+24],@X[3] - subcc %g0,$tmp31,$tmp32 ! should be 64-$tmp31, but -$tmp31 works too - ldx [$inp+40],@X[5] - bz,pt %icc,.Laligned - ldx [$inp+56],@X[7] - - sllx @X[0],$tmp31,@X[0] - ldx [$inp+64],$T1 -___ -for($j=0;$j<7;$j++) -{ $code.=<<___; - srlx @X[$j+1],$tmp32,$tmp1 - sllx @X[$j+1],$tmp31,@X[$j+1] - or $tmp1,@X[$j],@X[$j] -___ -} -$code.=<<___; - srlx $T1,$tmp32,$T1 - or $T1,@X[7],@X[7] -.Laligned: -___ - } - - if ($i&1) { - $code.="\tadd @X[$i/2],$h,$T1\n"; - } else { - $code.="\tsrlx @X[$i/2],32,$T1\n\tadd $h,$T1,$T1\n"; - } -} if ($SZ==4); - -########### SHA512 -$Xload = sub { -my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_; -my @pair=("%l".eval(($i*2)%8),"%l".eval(($i*2)%8+1),"%l".eval((($i+1)*2)%8)); - -$code.=<<___ if ($i==0); - ld [$inp+0],%l0 - ld [$inp+4],%l1 - ld [$inp+8],%l2 - ld [$inp+12],%l3 - ld [$inp+16],%l4 - ld [$inp+20],%l5 - ld [$inp+24],%l6 - ld [$inp+28],%l7 -___ -$code.=<<___ if ($i<15); - sllx @pair[1],$tmp31,$tmp2 ! Xload($i) - add $tmp31,32,$tmp0 - sllx @pair[0],$tmp0,$tmp1 - `"ld [$inp+".eval(32+0+$i*8)."],@pair[0]" if ($i<12)` - srlx @pair[2],$tmp32,@pair[1] - or $tmp1,$tmp2,$tmp2 - or @pair[1],$tmp2,$tmp2 - `"ld [$inp+".eval(32+4+$i*8)."],@pair[1]" if ($i<12)` - add $h,$tmp2,$T1 - $ST $tmp2,[%sp+`$bias+$frame+$i*$SZ`] -___ -$code.=<<___ if ($i==12); - brnz,a $tmp31,.+8 - ld [$inp+128],%l0 -___ -$code.=<<___ if ($i==15); - ld [%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+0`],%l2 - sllx @pair[1],$tmp31,$tmp2 ! Xload($i) - add $tmp31,32,$tmp0 - ld [%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+4`],%l3 - sllx @pair[0],$tmp0,$tmp1 - ld [%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+0`],%l4 - srlx @pair[2],$tmp32,@pair[1] - or $tmp1,$tmp2,$tmp2 - ld [%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+4`],%l5 - or @pair[1],$tmp2,$tmp2 - ld [%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+0`],%l6 - add $h,$tmp2,$T1 - $ST $tmp2,[%sp+`$bias+$frame+$i*$SZ`] - ld [%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+4`],%l7 - ld [%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+0`],%l0 - ld [%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+4`],%l1 -___ -} if ($SZ==8); - -########### common -sub BODY_00_15 { -my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_; - - if ($i<16) { - &$Xload(@_); - } else { - $code.="\tadd $h,$T1,$T1\n"; - } - -$code.=<<___; - $SRL $e,@Sigma1[0],$h !! $i - xor $f,$g,$tmp2 - $SLL $e,`$SZ*8-@Sigma1[2]`,$tmp1 - and $e,$tmp2,$tmp2 - $SRL $e,@Sigma1[1],$tmp0 - xor $tmp1,$h,$h - $SLL $e,`$SZ*8-@Sigma1[1]`,$tmp1 - xor $tmp0,$h,$h - $SRL $e,@Sigma1[2],$tmp0 - xor $tmp1,$h,$h - $SLL $e,`$SZ*8-@Sigma1[0]`,$tmp1 - xor $tmp0,$h,$h - xor $g,$tmp2,$tmp2 ! Ch(e,f,g) - xor $tmp1,$h,$tmp0 ! Sigma1(e) - - $SRL $a,@Sigma0[0],$h - add $tmp2,$T1,$T1 - $LD [$Ktbl+`$i*$SZ`],$tmp2 ! K[$i] - $SLL $a,`$SZ*8-@Sigma0[2]`,$tmp1 - add $tmp0,$T1,$T1 - $SRL $a,@Sigma0[1],$tmp0 - xor $tmp1,$h,$h - $SLL $a,`$SZ*8-@Sigma0[1]`,$tmp1 - xor $tmp0,$h,$h - $SRL $a,@Sigma0[2],$tmp0 - xor $tmp1,$h,$h - $SLL $a,`$SZ*8-@Sigma0[0]`,$tmp1 - xor $tmp0,$h,$h - xor $tmp1,$h,$h ! Sigma0(a) - - or $a,$b,$tmp0 - and $a,$b,$tmp1 - and $c,$tmp0,$tmp0 - or $tmp0,$tmp1,$tmp1 ! Maj(a,b,c) - add $tmp2,$T1,$T1 ! +=K[$i] - add $tmp1,$h,$h - - add $T1,$d,$d - add $T1,$h,$h -___ -} - -########### SHA256 -$BODY_16_XX = sub { -my $i=@_[0]; -my $xi; - - if ($i&1) { - $xi=$tmp32; - $code.="\tsrlx @X[(($i+1)/2)%8],32,$xi\n"; - } else { - $xi=@X[(($i+1)/2)%8]; - } -$code.=<<___; - srl $xi,@sigma0[0],$T1 !! Xupdate($i) - sll $xi,`32-@sigma0[2]`,$tmp1 - srl $xi,@sigma0[1],$tmp0 - xor $tmp1,$T1,$T1 - sll $tmp1,`@sigma0[2]-@sigma0[1]`,$tmp1 - xor $tmp0,$T1,$T1 - srl $xi,@sigma0[2],$tmp0 - xor $tmp1,$T1,$T1 -___ - if ($i&1) { - $xi=@X[(($i+14)/2)%8]; - } else { - $xi=$tmp32; - $code.="\tsrlx @X[(($i+14)/2)%8],32,$xi\n"; - } -$code.=<<___; - srl $xi,@sigma1[0],$tmp2 - xor $tmp0,$T1,$T1 ! T1=sigma0(X[i+1]) - sll $xi,`32-@sigma1[2]`,$tmp1 - srl $xi,@sigma1[1],$tmp0 - xor $tmp1,$tmp2,$tmp2 - sll $tmp1,`@sigma1[2]-@sigma1[1]`,$tmp1 - xor $tmp0,$tmp2,$tmp2 - srl $xi,@sigma1[2],$tmp0 - xor $tmp1,$tmp2,$tmp2 -___ - if ($i&1) { - $xi=@X[($i/2)%8]; -$code.=<<___; - srlx @X[(($i+9)/2)%8],32,$tmp1 ! X[i+9] - xor $tmp0,$tmp2,$tmp2 ! sigma1(X[i+14]) - srl @X[($i/2)%8],0,$tmp0 - add $xi,$T1,$T1 ! +=X[i] - xor $tmp0,@X[($i/2)%8],@X[($i/2)%8] - add $tmp2,$T1,$T1 - add $tmp1,$T1,$T1 - - srl $T1,0,$T1 - or $T1,@X[($i/2)%8],@X[($i/2)%8] -___ - } else { - $xi=@X[(($i+9)/2)%8]; -$code.=<<___; - srlx @X[($i/2)%8],32,$tmp1 ! X[i] - xor $tmp0,$tmp2,$tmp2 ! sigma1(X[i+14]) - srl @X[($i/2)%8],0,@X[($i/2)%8] - add $xi,$T1,$T1 ! +=X[i+9] - add $tmp2,$T1,$T1 - add $tmp1,$T1,$T1 - - sllx $T1,32,$tmp0 - or $tmp0,@X[($i/2)%8],@X[($i/2)%8] -___ - } - &BODY_00_15(@_); -} if ($SZ==4); - -########### SHA512 -$BODY_16_XX = sub { -my $i=@_[0]; -my @pair=("%l".eval(($i*2)%8),"%l".eval(($i*2)%8+1)); - -$code.=<<___; - sllx %l2,32,$tmp0 !! Xupdate($i) - or %l3,$tmp0,$tmp0 - - srlx $tmp0,@sigma0[0],$T1 - ld [%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+0`],%l2 - sllx $tmp0,`64-@sigma0[2]`,$tmp1 - ld [%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+4`],%l3 - srlx $tmp0,@sigma0[1],$tmp0 - xor $tmp1,$T1,$T1 - sllx $tmp1,`@sigma0[2]-@sigma0[1]`,$tmp1 - xor $tmp0,$T1,$T1 - srlx $tmp0,`@sigma0[2]-@sigma0[1]`,$tmp0 - xor $tmp1,$T1,$T1 - sllx %l6,32,$tmp2 - xor $tmp0,$T1,$T1 ! sigma0(X[$i+1]) - or %l7,$tmp2,$tmp2 - - srlx $tmp2,@sigma1[0],$tmp1 - ld [%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+0`],%l6 - sllx $tmp2,`64-@sigma1[2]`,$tmp0 - ld [%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+4`],%l7 - srlx $tmp2,@sigma1[1],$tmp2 - xor $tmp0,$tmp1,$tmp1 - sllx $tmp0,`@sigma1[2]-@sigma1[1]`,$tmp0 - xor $tmp2,$tmp1,$tmp1 - srlx $tmp2,`@sigma1[2]-@sigma1[1]`,$tmp2 - xor $tmp0,$tmp1,$tmp1 - sllx %l4,32,$tmp0 - xor $tmp2,$tmp1,$tmp1 ! sigma1(X[$i+14]) - ld [%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+0`],%l4 - or %l5,$tmp0,$tmp0 - ld [%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+4`],%l5 - - sllx %l0,32,$tmp2 - add $tmp1,$T1,$T1 - ld [%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+0`],%l0 - or %l1,$tmp2,$tmp2 - add $tmp0,$T1,$T1 ! +=X[$i+9] - ld [%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+4`],%l1 - add $tmp2,$T1,$T1 ! +=X[$i] - $ST $T1,[%sp+`$bias+$frame+($i%16)*$SZ`] -___ - &BODY_00_15(@_); -} if ($SZ==8); - -$code.=<<___ if ($bits==64); -.register %g2,#scratch -.register %g3,#scratch -___ -$code.=<<___; -.section ".text",#alloc,#execinstr - -.align 64 -K${label}: -.type K${label},#object -___ -if ($SZ==4) { -$code.=<<___; - .long 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5 - .long 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5 - .long 0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3 - .long 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174 - .long 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc - .long 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da - .long 0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7 - .long 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967 - .long 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13 - .long 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85 - .long 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3 - .long 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070 - .long 0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5 - .long 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3 - .long 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208 - .long 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2 -___ -} else { -$code.=<<___; - .long 0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd - .long 0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc - .long 0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019 - .long 0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118 - .long 0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe - .long 0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2 - .long 0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1 - .long 0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694 - .long 0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3 - .long 0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65 - .long 0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483 - .long 0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5 - .long 0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210 - .long 0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4 - .long 0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725 - .long 0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70 - .long 0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926 - .long 0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df - .long 0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8 - .long 0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b - .long 0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001 - .long 0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30 - .long 0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910 - .long 0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8 - .long 0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53 - .long 0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8 - .long 0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb - .long 0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3 - .long 0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60 - .long 0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec - .long 0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9 - .long 0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b - .long 0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207 - .long 0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178 - .long 0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6 - .long 0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b - .long 0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493 - .long 0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c - .long 0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a - .long 0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817 -___ -} -$code.=<<___; -.size K${label},.-K${label} -.globl sha${label}_block_data_order -sha${label}_block_data_order: - save %sp,`-$frame-$locals`,%sp - and $inp,`$align-1`,$tmp31 - sllx $len,`log(16*$SZ)/log(2)`,$len - andn $inp,`$align-1`,$inp - sll $tmp31,3,$tmp31 - add $inp,$len,$len -___ -$code.=<<___ if ($SZ==8); # SHA512 - mov 32,$tmp32 - sub $tmp32,$tmp31,$tmp32 -___ -$code.=<<___; -.Lpic: call .+8 - add %o7,K${label}-.Lpic,$Ktbl - - $LD [$ctx+`0*$SZ`],$A - $LD [$ctx+`1*$SZ`],$B - $LD [$ctx+`2*$SZ`],$C - $LD [$ctx+`3*$SZ`],$D - $LD [$ctx+`4*$SZ`],$E - $LD [$ctx+`5*$SZ`],$F - $LD [$ctx+`6*$SZ`],$G - $LD [$ctx+`7*$SZ`],$H - -.Lloop: -___ -for ($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } -$code.=".L16_xx:\n"; -for (;$i<32;$i++) { &$BODY_16_XX($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; - and $tmp2,0xfff,$tmp2 - cmp $tmp2,$lastK - bne .L16_xx - add $Ktbl,`16*$SZ`,$Ktbl ! Ktbl+=16 - -___ -$code.=<<___ if ($SZ==4); # SHA256 - $LD [$ctx+`0*$SZ`],@X[0] - $LD [$ctx+`1*$SZ`],@X[1] - $LD [$ctx+`2*$SZ`],@X[2] - $LD [$ctx+`3*$SZ`],@X[3] - $LD [$ctx+`4*$SZ`],@X[4] - $LD [$ctx+`5*$SZ`],@X[5] - $LD [$ctx+`6*$SZ`],@X[6] - $LD [$ctx+`7*$SZ`],@X[7] - - add $A,@X[0],$A - $ST $A,[$ctx+`0*$SZ`] - add $B,@X[1],$B - $ST $B,[$ctx+`1*$SZ`] - add $C,@X[2],$C - $ST $C,[$ctx+`2*$SZ`] - add $D,@X[3],$D - $ST $D,[$ctx+`3*$SZ`] - add $E,@X[4],$E - $ST $E,[$ctx+`4*$SZ`] - add $F,@X[5],$F - $ST $F,[$ctx+`5*$SZ`] - add $G,@X[6],$G - $ST $G,[$ctx+`6*$SZ`] - add $H,@X[7],$H - $ST $H,[$ctx+`7*$SZ`] -___ -$code.=<<___ if ($SZ==8); # SHA512 - ld [$ctx+`0*$SZ+0`],%l0 - ld [$ctx+`0*$SZ+4`],%l1 - ld [$ctx+`1*$SZ+0`],%l2 - ld [$ctx+`1*$SZ+4`],%l3 - ld [$ctx+`2*$SZ+0`],%l4 - ld [$ctx+`2*$SZ+4`],%l5 - ld [$ctx+`3*$SZ+0`],%l6 - - sllx %l0,32,$tmp0 - ld [$ctx+`3*$SZ+4`],%l7 - sllx %l2,32,$tmp1 - or %l1,$tmp0,$tmp0 - or %l3,$tmp1,$tmp1 - add $tmp0,$A,$A - add $tmp1,$B,$B - $ST $A,[$ctx+`0*$SZ`] - sllx %l4,32,$tmp2 - $ST $B,[$ctx+`1*$SZ`] - sllx %l6,32,$T1 - or %l5,$tmp2,$tmp2 - or %l7,$T1,$T1 - add $tmp2,$C,$C - $ST $C,[$ctx+`2*$SZ`] - add $T1,$D,$D - $ST $D,[$ctx+`3*$SZ`] - - ld [$ctx+`4*$SZ+0`],%l0 - ld [$ctx+`4*$SZ+4`],%l1 - ld [$ctx+`5*$SZ+0`],%l2 - ld [$ctx+`5*$SZ+4`],%l3 - ld [$ctx+`6*$SZ+0`],%l4 - ld [$ctx+`6*$SZ+4`],%l5 - ld [$ctx+`7*$SZ+0`],%l6 - - sllx %l0,32,$tmp0 - ld [$ctx+`7*$SZ+4`],%l7 - sllx %l2,32,$tmp1 - or %l1,$tmp0,$tmp0 - or %l3,$tmp1,$tmp1 - add $tmp0,$E,$E - add $tmp1,$F,$F - $ST $E,[$ctx+`4*$SZ`] - sllx %l4,32,$tmp2 - $ST $F,[$ctx+`5*$SZ`] - sllx %l6,32,$T1 - or %l5,$tmp2,$tmp2 - or %l7,$T1,$T1 - add $tmp2,$G,$G - $ST $G,[$ctx+`6*$SZ`] - add $T1,$H,$H - $ST $H,[$ctx+`7*$SZ`] -___ -$code.=<<___; - add $inp,`16*$SZ`,$inp ! advance inp - cmp $inp,$len - bne `$bits==64?"%xcc":"%icc"`,.Lloop - sub $Ktbl,`($rounds-16)*$SZ`,$Ktbl ! rewind Ktbl - - ret - restore -.type sha${label}_block_data_order,#function -.size sha${label}_block_data_order,(.-sha${label}_block_data_order) -.asciz "SHA${label} block transform for SPARCv9, CRYPTOGAMS by <appro\@openssl.org>" -.align 4 -___ - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -print $code; -close STDOUT; diff --git a/app/openssl/crypto/sha/asm/sha512-x86_64.pl b/app/openssl/crypto/sha/asm/sha512-x86_64.pl deleted file mode 100755 index e6643f8c..00000000 --- a/app/openssl/crypto/sha/asm/sha512-x86_64.pl +++ /dev/null @@ -1,456 +0,0 @@ -#!/usr/bin/env perl -# -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. Rights for redistribution and usage in source and binary -# forms are granted according to the OpenSSL license. -# ==================================================================== -# -# sha256/512_block procedure for x86_64. -# -# 40% improvement over compiler-generated code on Opteron. On EM64T -# sha256 was observed to run >80% faster and sha512 - >40%. No magical -# tricks, just straight implementation... I really wonder why gcc -# [being armed with inline assembler] fails to generate as fast code. -# The only thing which is cool about this module is that it's very -# same instruction sequence used for both SHA-256 and SHA-512. In -# former case the instructions operate on 32-bit operands, while in -# latter - on 64-bit ones. All I had to do is to get one flavor right, -# the other one passed the test right away:-) -# -# sha256_block runs in ~1005 cycles on Opteron, which gives you -# asymptotic performance of 64*1000/1005=63.7MBps times CPU clock -# frequency in GHz. sha512_block runs in ~1275 cycles, which results -# in 128*1000/1275=100MBps per GHz. Is there room for improvement? -# Well, if you compare it to IA-64 implementation, which maintains -# X[16] in register bank[!], tends to 4 instructions per CPU clock -# cycle and runs in 1003 cycles, 1275 is very good result for 3-way -# issue Opteron pipeline and X[16] maintained in memory. So that *if* -# there is a way to improve it, *then* the only way would be to try to -# offload X[16] updates to SSE unit, but that would require "deeper" -# loop unroll, which in turn would naturally cause size blow-up, not -# to mention increased complexity! And once again, only *if* it's -# actually possible to noticeably improve overall ILP, instruction -# level parallelism, on a given CPU implementation in this case. -# -# Special note on Intel EM64T. While Opteron CPU exhibits perfect -# perfromance ratio of 1.5 between 64- and 32-bit flavors [see above], -# [currently available] EM64T CPUs apparently are far from it. On the -# contrary, 64-bit version, sha512_block, is ~30% *slower* than 32-bit -# sha256_block:-( This is presumably because 64-bit shifts/rotates -# apparently are not atomic instructions, but implemented in microcode. - -$flavour = shift; -$output = shift; -if ($flavour =~ /\./) { $output = $flavour; undef $flavour; } - -$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/); - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or -( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or -die "can't locate x86_64-xlate.pl"; - -open STDOUT,"| $^X $xlate $flavour $output"; - -if ($output =~ /512/) { - $func="sha512_block_data_order"; - $TABLE="K512"; - $SZ=8; - @ROT=($A,$B,$C,$D,$E,$F,$G,$H)=("%rax","%rbx","%rcx","%rdx", - "%r8", "%r9", "%r10","%r11"); - ($T1,$a0,$a1,$a2)=("%r12","%r13","%r14","%r15"); - @Sigma0=(28,34,39); - @Sigma1=(14,18,41); - @sigma0=(1, 8, 7); - @sigma1=(19,61, 6); - $rounds=80; -} else { - $func="sha256_block_data_order"; - $TABLE="K256"; - $SZ=4; - @ROT=($A,$B,$C,$D,$E,$F,$G,$H)=("%eax","%ebx","%ecx","%edx", - "%r8d","%r9d","%r10d","%r11d"); - ($T1,$a0,$a1,$a2)=("%r12d","%r13d","%r14d","%r15d"); - @Sigma0=( 2,13,22); - @Sigma1=( 6,11,25); - @sigma0=( 7,18, 3); - @sigma1=(17,19,10); - $rounds=64; -} - -$ctx="%rdi"; # 1st arg -$round="%rdi"; # zaps $ctx -$inp="%rsi"; # 2nd arg -$Tbl="%rbp"; - -$_ctx="16*$SZ+0*8(%rsp)"; -$_inp="16*$SZ+1*8(%rsp)"; -$_end="16*$SZ+2*8(%rsp)"; -$_rsp="16*$SZ+3*8(%rsp)"; -$framesz="16*$SZ+4*8"; - - -sub ROUND_00_15() -{ my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; - -$code.=<<___; - mov $e,$a0 - mov $e,$a1 - mov $f,$a2 - - ror \$$Sigma1[0],$a0 - ror \$$Sigma1[1],$a1 - xor $g,$a2 # f^g - - xor $a1,$a0 - ror \$`$Sigma1[2]-$Sigma1[1]`,$a1 - and $e,$a2 # (f^g)&e - mov $T1,`$SZ*($i&0xf)`(%rsp) - - xor $a1,$a0 # Sigma1(e) - xor $g,$a2 # Ch(e,f,g)=((f^g)&e)^g - add $h,$T1 # T1+=h - - mov $a,$h - add $a0,$T1 # T1+=Sigma1(e) - - add $a2,$T1 # T1+=Ch(e,f,g) - mov $a,$a0 - mov $a,$a1 - - ror \$$Sigma0[0],$h - ror \$$Sigma0[1],$a0 - mov $a,$a2 - add ($Tbl,$round,$SZ),$T1 # T1+=K[round] - - xor $a0,$h - ror \$`$Sigma0[2]-$Sigma0[1]`,$a0 - or $c,$a1 # a|c - - xor $a0,$h # h=Sigma0(a) - and $c,$a2 # a&c - add $T1,$d # d+=T1 - - and $b,$a1 # (a|c)&b - add $T1,$h # h+=T1 - - or $a2,$a1 # Maj(a,b,c)=((a|c)&b)|(a&c) - lea 1($round),$round # round++ - - add $a1,$h # h+=Maj(a,b,c) -___ -} - -sub ROUND_16_XX() -{ my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; - -$code.=<<___; - mov `$SZ*(($i+1)&0xf)`(%rsp),$a0 - mov `$SZ*(($i+14)&0xf)`(%rsp),$T1 - - mov $a0,$a2 - - shr \$$sigma0[2],$a0 - ror \$$sigma0[0],$a2 - - xor $a2,$a0 - ror \$`$sigma0[1]-$sigma0[0]`,$a2 - - xor $a2,$a0 # sigma0(X[(i+1)&0xf]) - mov $T1,$a1 - - shr \$$sigma1[2],$T1 - ror \$$sigma1[0],$a1 - - xor $a1,$T1 - ror \$`$sigma1[1]-$sigma1[0]`,$a1 - - xor $a1,$T1 # sigma1(X[(i+14)&0xf]) - - add $a0,$T1 - - add `$SZ*(($i+9)&0xf)`(%rsp),$T1 - - add `$SZ*($i&0xf)`(%rsp),$T1 -___ - &ROUND_00_15(@_); -} - -$code=<<___; -.text - -.globl $func -.type $func,\@function,4 -.align 16 -$func: - push %rbx - push %rbp - push %r12 - push %r13 - push %r14 - push %r15 - mov %rsp,%r11 # copy %rsp - shl \$4,%rdx # num*16 - sub \$$framesz,%rsp - lea ($inp,%rdx,$SZ),%rdx # inp+num*16*$SZ - and \$-64,%rsp # align stack frame - mov $ctx,$_ctx # save ctx, 1st arg - mov $inp,$_inp # save inp, 2nd arh - mov %rdx,$_end # save end pointer, "3rd" arg - mov %r11,$_rsp # save copy of %rsp -.Lprologue: - - lea $TABLE(%rip),$Tbl - - mov $SZ*0($ctx),$A - mov $SZ*1($ctx),$B - mov $SZ*2($ctx),$C - mov $SZ*3($ctx),$D - mov $SZ*4($ctx),$E - mov $SZ*5($ctx),$F - mov $SZ*6($ctx),$G - mov $SZ*7($ctx),$H - jmp .Lloop - -.align 16 -.Lloop: - xor $round,$round -___ - for($i=0;$i<16;$i++) { - $code.=" mov $SZ*$i($inp),$T1\n"; - $code.=" bswap $T1\n"; - &ROUND_00_15($i,@ROT); - unshift(@ROT,pop(@ROT)); - } -$code.=<<___; - jmp .Lrounds_16_xx -.align 16 -.Lrounds_16_xx: -___ - for(;$i<32;$i++) { - &ROUND_16_XX($i,@ROT); - unshift(@ROT,pop(@ROT)); - } - -$code.=<<___; - cmp \$$rounds,$round - jb .Lrounds_16_xx - - mov $_ctx,$ctx - lea 16*$SZ($inp),$inp - - add $SZ*0($ctx),$A - add $SZ*1($ctx),$B - add $SZ*2($ctx),$C - add $SZ*3($ctx),$D - add $SZ*4($ctx),$E - add $SZ*5($ctx),$F - add $SZ*6($ctx),$G - add $SZ*7($ctx),$H - - cmp $_end,$inp - - mov $A,$SZ*0($ctx) - mov $B,$SZ*1($ctx) - mov $C,$SZ*2($ctx) - mov $D,$SZ*3($ctx) - mov $E,$SZ*4($ctx) - mov $F,$SZ*5($ctx) - mov $G,$SZ*6($ctx) - mov $H,$SZ*7($ctx) - jb .Lloop - - mov $_rsp,%rsi - mov (%rsi),%r15 - mov 8(%rsi),%r14 - mov 16(%rsi),%r13 - mov 24(%rsi),%r12 - mov 32(%rsi),%rbp - mov 40(%rsi),%rbx - lea 48(%rsi),%rsp -.Lepilogue: - ret -.size $func,.-$func -___ - -if ($SZ==4) { -$code.=<<___; -.align 64 -.type $TABLE,\@object -$TABLE: - .long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 - .long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 - .long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 - .long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 - .long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc - .long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da - .long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 - .long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 - .long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 - .long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 - .long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 - .long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 - .long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 - .long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 - .long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 - .long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 -___ -} else { -$code.=<<___; -.align 64 -.type $TABLE,\@object -$TABLE: - .quad 0x428a2f98d728ae22,0x7137449123ef65cd - .quad 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc - .quad 0x3956c25bf348b538,0x59f111f1b605d019 - .quad 0x923f82a4af194f9b,0xab1c5ed5da6d8118 - .quad 0xd807aa98a3030242,0x12835b0145706fbe - .quad 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2 - .quad 0x72be5d74f27b896f,0x80deb1fe3b1696b1 - .quad 0x9bdc06a725c71235,0xc19bf174cf692694 - .quad 0xe49b69c19ef14ad2,0xefbe4786384f25e3 - .quad 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65 - .quad 0x2de92c6f592b0275,0x4a7484aa6ea6e483 - .quad 0x5cb0a9dcbd41fbd4,0x76f988da831153b5 - .quad 0x983e5152ee66dfab,0xa831c66d2db43210 - .quad 0xb00327c898fb213f,0xbf597fc7beef0ee4 - .quad 0xc6e00bf33da88fc2,0xd5a79147930aa725 - .quad 0x06ca6351e003826f,0x142929670a0e6e70 - .quad 0x27b70a8546d22ffc,0x2e1b21385c26c926 - .quad 0x4d2c6dfc5ac42aed,0x53380d139d95b3df - .quad 0x650a73548baf63de,0x766a0abb3c77b2a8 - .quad 0x81c2c92e47edaee6,0x92722c851482353b - .quad 0xa2bfe8a14cf10364,0xa81a664bbc423001 - .quad 0xc24b8b70d0f89791,0xc76c51a30654be30 - .quad 0xd192e819d6ef5218,0xd69906245565a910 - .quad 0xf40e35855771202a,0x106aa07032bbd1b8 - .quad 0x19a4c116b8d2d0c8,0x1e376c085141ab53 - .quad 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8 - .quad 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb - .quad 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3 - .quad 0x748f82ee5defb2fc,0x78a5636f43172f60 - .quad 0x84c87814a1f0ab72,0x8cc702081a6439ec - .quad 0x90befffa23631e28,0xa4506cebde82bde9 - .quad 0xbef9a3f7b2c67915,0xc67178f2e372532b - .quad 0xca273eceea26619c,0xd186b8c721c0c207 - .quad 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178 - .quad 0x06f067aa72176fba,0x0a637dc5a2c898a6 - .quad 0x113f9804bef90dae,0x1b710b35131c471b - .quad 0x28db77f523047d84,0x32caab7b40c72493 - .quad 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c - .quad 0x4cc5d4becb3e42b6,0x597f299cfc657e2a - .quad 0x5fcb6fab3ad6faec,0x6c44198c4a475817 -___ -} - -# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame, -# CONTEXT *context,DISPATCHER_CONTEXT *disp) -if ($win64) { -$rec="%rcx"; -$frame="%rdx"; -$context="%r8"; -$disp="%r9"; - -$code.=<<___; -.extern __imp_RtlVirtualUnwind -.type se_handler,\@abi-omnipotent -.align 16 -se_handler: - push %rsi - push %rdi - push %rbx - push %rbp - push %r12 - push %r13 - push %r14 - push %r15 - pushfq - sub \$64,%rsp - - mov 120($context),%rax # pull context->Rax - mov 248($context),%rbx # pull context->Rip - - lea .Lprologue(%rip),%r10 - cmp %r10,%rbx # context->Rip<.Lprologue - jb .Lin_prologue - - mov 152($context),%rax # pull context->Rsp - - lea .Lepilogue(%rip),%r10 - cmp %r10,%rbx # context->Rip>=.Lepilogue - jae .Lin_prologue - - mov 16*$SZ+3*8(%rax),%rax # pull $_rsp - lea 48(%rax),%rax - - mov -8(%rax),%rbx - mov -16(%rax),%rbp - mov -24(%rax),%r12 - mov -32(%rax),%r13 - mov -40(%rax),%r14 - mov -48(%rax),%r15 - mov %rbx,144($context) # restore context->Rbx - mov %rbp,160($context) # restore context->Rbp - mov %r12,216($context) # restore context->R12 - mov %r13,224($context) # restore context->R13 - mov %r14,232($context) # restore context->R14 - mov %r15,240($context) # restore context->R15 - -.Lin_prologue: - mov 8(%rax),%rdi - mov 16(%rax),%rsi - mov %rax,152($context) # restore context->Rsp - mov %rsi,168($context) # restore context->Rsi - mov %rdi,176($context) # restore context->Rdi - - mov 40($disp),%rdi # disp->ContextRecord - mov $context,%rsi # context - mov \$154,%ecx # sizeof(CONTEXT) - .long 0xa548f3fc # cld; rep movsq - - mov $disp,%rsi - xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER - mov 8(%rsi),%rdx # arg2, disp->ImageBase - mov 0(%rsi),%r8 # arg3, disp->ControlPc - mov 16(%rsi),%r9 # arg4, disp->FunctionEntry - mov 40(%rsi),%r10 # disp->ContextRecord - lea 56(%rsi),%r11 # &disp->HandlerData - lea 24(%rsi),%r12 # &disp->EstablisherFrame - mov %r10,32(%rsp) # arg5 - mov %r11,40(%rsp) # arg6 - mov %r12,48(%rsp) # arg7 - mov %rcx,56(%rsp) # arg8, (NULL) - call *__imp_RtlVirtualUnwind(%rip) - - mov \$1,%eax # ExceptionContinueSearch - add \$64,%rsp - popfq - pop %r15 - pop %r14 - pop %r13 - pop %r12 - pop %rbp - pop %rbx - pop %rdi - pop %rsi - ret -.size se_handler,.-se_handler - -.section .pdata -.align 4 - .rva .LSEH_begin_$func - .rva .LSEH_end_$func - .rva .LSEH_info_$func - -.section .xdata -.align 8 -.LSEH_info_$func: - .byte 9,0,0,0 - .rva se_handler -___ -} - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -print $code; -close STDOUT; diff --git a/app/openssl/crypto/sha/sha.c b/app/openssl/crypto/sha/sha.c deleted file mode 100644 index 42126551..00000000 --- a/app/openssl/crypto/sha/sha.c +++ /dev/null @@ -1,124 +0,0 @@ -/* crypto/sha/sha.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include <stdlib.h> -#include <openssl/sha.h> - -#define BUFSIZE 1024*16 - -void do_fp(FILE *f); -void pt(unsigned char *md); -int read(int, void *, unsigned int); -int main(int argc, char **argv) - { - int i,err=0; - FILE *IN; - - if (argc == 1) - { - do_fp(stdin); - } - else - { - for (i=1; i<argc; i++) - { - IN=fopen(argv[i],"r"); - if (IN == NULL) - { - perror(argv[i]); - err++; - continue; - } - printf("SHA(%s)= ",argv[i]); - do_fp(IN); - fclose(IN); - } - } - exit(err); - } - -void do_fp(FILE *f) - { - SHA_CTX c; - unsigned char md[SHA_DIGEST_LENGTH]; - int fd; - int i; - unsigned char buf[BUFSIZE]; - - fd=fileno(f); - SHA_Init(&c); - for (;;) - { - i=read(fd,buf,BUFSIZE); - if (i <= 0) break; - SHA_Update(&c,buf,(unsigned long)i); - } - SHA_Final(&(md[0]),&c); - pt(md); - } - -void pt(unsigned char *md) - { - int i; - - for (i=0; i<SHA_DIGEST_LENGTH; i++) - printf("%02x",md[i]); - printf("\n"); - } - diff --git a/app/openssl/crypto/sha/sha.h b/app/openssl/crypto/sha/sha.h deleted file mode 100644 index 16cacf9f..00000000 --- a/app/openssl/crypto/sha/sha.h +++ /dev/null @@ -1,200 +0,0 @@ -/* crypto/sha/sha.h */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#ifndef HEADER_SHA_H -#define HEADER_SHA_H - -#include <openssl/e_os2.h> -#include <stddef.h> - -#ifdef __cplusplus -extern "C" { -#endif - -#if defined(OPENSSL_NO_SHA) || (defined(OPENSSL_NO_SHA0) && defined(OPENSSL_NO_SHA1)) -#error SHA is disabled. -#endif - -#if defined(OPENSSL_FIPS) -#define FIPS_SHA_SIZE_T size_t -#endif - -/* - * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - * ! SHA_LONG has to be at least 32 bits wide. If it's wider, then ! - * ! SHA_LONG_LOG2 has to be defined along. ! - * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - */ - -#if defined(__LP32__) -#define SHA_LONG unsigned long -#elif defined(OPENSSL_SYS_CRAY) || defined(__ILP64__) -#define SHA_LONG unsigned long -#define SHA_LONG_LOG2 3 -#else -#define SHA_LONG unsigned int -#endif - -#define SHA_LBLOCK 16 -#define SHA_CBLOCK (SHA_LBLOCK*4) /* SHA treats input data as a - * contiguous array of 32 bit - * wide big-endian values. */ -#define SHA_LAST_BLOCK (SHA_CBLOCK-8) -#define SHA_DIGEST_LENGTH 20 - -typedef struct SHAstate_st - { - SHA_LONG h0,h1,h2,h3,h4; - SHA_LONG Nl,Nh; - SHA_LONG data[SHA_LBLOCK]; - unsigned int num; - } SHA_CTX; - -#ifndef OPENSSL_NO_SHA0 -int SHA_Init(SHA_CTX *c); -int SHA_Update(SHA_CTX *c, const void *data, size_t len); -int SHA_Final(unsigned char *md, SHA_CTX *c); -unsigned char *SHA(const unsigned char *d, size_t n, unsigned char *md); -void SHA_Transform(SHA_CTX *c, const unsigned char *data); -#endif -#ifndef OPENSSL_NO_SHA1 -int SHA1_Init(SHA_CTX *c); -int SHA1_Update(SHA_CTX *c, const void *data, size_t len); -int SHA1_Final(unsigned char *md, SHA_CTX *c); -unsigned char *SHA1(const unsigned char *d, size_t n, unsigned char *md); -void SHA1_Transform(SHA_CTX *c, const unsigned char *data); -#endif - -#define SHA256_CBLOCK (SHA_LBLOCK*4) /* SHA-256 treats input data as a - * contiguous array of 32 bit - * wide big-endian values. */ -#define SHA224_DIGEST_LENGTH 28 -#define SHA256_DIGEST_LENGTH 32 - -typedef struct SHA256state_st - { - SHA_LONG h[8]; - SHA_LONG Nl,Nh; - SHA_LONG data[SHA_LBLOCK]; - unsigned int num,md_len; - } SHA256_CTX; - -#ifndef OPENSSL_NO_SHA256 -int SHA224_Init(SHA256_CTX *c); -int SHA224_Update(SHA256_CTX *c, const void *data, size_t len); -int SHA224_Final(unsigned char *md, SHA256_CTX *c); -unsigned char *SHA224(const unsigned char *d, size_t n,unsigned char *md); -int SHA256_Init(SHA256_CTX *c); -int SHA256_Update(SHA256_CTX *c, const void *data, size_t len); -int SHA256_Final(unsigned char *md, SHA256_CTX *c); -unsigned char *SHA256(const unsigned char *d, size_t n,unsigned char *md); -void SHA256_Transform(SHA256_CTX *c, const unsigned char *data); -#endif - -#define SHA384_DIGEST_LENGTH 48 -#define SHA512_DIGEST_LENGTH 64 - -#ifndef OPENSSL_NO_SHA512 -/* - * Unlike 32-bit digest algorithms, SHA-512 *relies* on SHA_LONG64 - * being exactly 64-bit wide. See Implementation Notes in sha512.c - * for further details. - */ -#define SHA512_CBLOCK (SHA_LBLOCK*8) /* SHA-512 treats input data as a - * contiguous array of 64 bit - * wide big-endian values. */ -#if (defined(_WIN32) || defined(_WIN64)) && !defined(__MINGW32__) -#define SHA_LONG64 unsigned __int64 -#define U64(C) C##UI64 -#elif defined(__arch64__) -#define SHA_LONG64 unsigned long -#define U64(C) C##UL -#else -#define SHA_LONG64 unsigned long long -#define U64(C) C##ULL -#endif - -typedef struct SHA512state_st - { - SHA_LONG64 h[8]; - SHA_LONG64 Nl,Nh; - union { - SHA_LONG64 d[SHA_LBLOCK]; - unsigned char p[SHA512_CBLOCK]; - } u; - unsigned int num,md_len; - } SHA512_CTX; -#endif - -#ifndef OPENSSL_NO_SHA512 -int SHA384_Init(SHA512_CTX *c); -int SHA384_Update(SHA512_CTX *c, const void *data, size_t len); -int SHA384_Final(unsigned char *md, SHA512_CTX *c); -unsigned char *SHA384(const unsigned char *d, size_t n,unsigned char *md); -int SHA512_Init(SHA512_CTX *c); -int SHA512_Update(SHA512_CTX *c, const void *data, size_t len); -int SHA512_Final(unsigned char *md, SHA512_CTX *c); -unsigned char *SHA512(const unsigned char *d, size_t n,unsigned char *md); -void SHA512_Transform(SHA512_CTX *c, const unsigned char *data); -#endif - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/app/openssl/crypto/sha/sha1.c b/app/openssl/crypto/sha/sha1.c deleted file mode 100644 index d350c88e..00000000 --- a/app/openssl/crypto/sha/sha1.c +++ /dev/null @@ -1,127 +0,0 @@ -/* crypto/sha/sha1.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include <stdlib.h> -#include <openssl/sha.h> - -#define BUFSIZE 1024*16 - -void do_fp(FILE *f); -void pt(unsigned char *md); -#ifndef _OSD_POSIX -int read(int, void *, unsigned int); -#endif - -int main(int argc, char **argv) - { - int i,err=0; - FILE *IN; - - if (argc == 1) - { - do_fp(stdin); - } - else - { - for (i=1; i<argc; i++) - { - IN=fopen(argv[i],"r"); - if (IN == NULL) - { - perror(argv[i]); - err++; - continue; - } - printf("SHA1(%s)= ",argv[i]); - do_fp(IN); - fclose(IN); - } - } - exit(err); - } - -void do_fp(FILE *f) - { - SHA_CTX c; - unsigned char md[SHA_DIGEST_LENGTH]; - int fd; - int i; - unsigned char buf[BUFSIZE]; - - fd=fileno(f); - SHA1_Init(&c); - for (;;) - { - i=read(fd,buf,BUFSIZE); - if (i <= 0) break; - SHA1_Update(&c,buf,(unsigned long)i); - } - SHA1_Final(&(md[0]),&c); - pt(md); - } - -void pt(unsigned char *md) - { - int i; - - for (i=0; i<SHA_DIGEST_LENGTH; i++) - printf("%02x",md[i]); - printf("\n"); - } - diff --git a/app/openssl/crypto/sha/sha1_one.c b/app/openssl/crypto/sha/sha1_one.c deleted file mode 100644 index 7c65b602..00000000 --- a/app/openssl/crypto/sha/sha1_one.c +++ /dev/null @@ -1,78 +0,0 @@ -/* crypto/sha/sha1_one.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include <string.h> -#include <openssl/sha.h> -#include <openssl/crypto.h> - -#ifndef OPENSSL_NO_SHA1 -unsigned char *SHA1(const unsigned char *d, size_t n, unsigned char *md) - { - SHA_CTX c; - static unsigned char m[SHA_DIGEST_LENGTH]; - - if (md == NULL) md=m; - if (!SHA1_Init(&c)) - return NULL; - SHA1_Update(&c,d,n); - SHA1_Final(md,&c); - OPENSSL_cleanse(&c,sizeof(c)); - return(md); - } -#endif diff --git a/app/openssl/crypto/sha/sha1dgst.c b/app/openssl/crypto/sha/sha1dgst.c deleted file mode 100644 index 50d1925c..00000000 --- a/app/openssl/crypto/sha/sha1dgst.c +++ /dev/null @@ -1,74 +0,0 @@ -/* crypto/sha/sha1dgst.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <openssl/opensslconf.h> -#if !defined(OPENSSL_NO_SHA1) && !defined(OPENSSL_NO_SHA) - -#undef SHA_0 -#define SHA_1 - -#include <openssl/opensslv.h> - -const char SHA1_version[]="SHA1" OPENSSL_VERSION_PTEXT; - -/* The implementation is in ../md32_common.h */ - -#include "sha_locl.h" - -#endif - diff --git a/app/openssl/crypto/sha/sha1test.c b/app/openssl/crypto/sha/sha1test.c deleted file mode 100644 index 6feb3964..00000000 --- a/app/openssl/crypto/sha/sha1test.c +++ /dev/null @@ -1,178 +0,0 @@ -/* crypto/sha/sha1test.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include <string.h> -#include <stdlib.h> - -#include "../e_os.h" - -#ifdef OPENSSL_NO_SHA -int main(int argc, char *argv[]) -{ - printf("No SHA support\n"); - return(0); -} -#else -#include <openssl/evp.h> -#include <openssl/sha.h> - -#ifdef CHARSET_EBCDIC -#include <openssl/ebcdic.h> -#endif - -#undef SHA_0 /* FIPS 180 */ -#define SHA_1 /* FIPS 180-1 */ - -static char *test[]={ - "abc", - "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq", - NULL, - }; - -#ifdef SHA_0 -static char *ret[]={ - "0164b8a914cd2a5e74c4f7ff082c4d97f1edf880", - "d2516ee1acfa5baf33dfc1c471e438449ef134c8", - }; -static char *bigret= - "3232affa48628a26653b5aaa44541fd90d690603"; -#endif -#ifdef SHA_1 -static char *ret[]={ - "a9993e364706816aba3e25717850c26c9cd0d89d", - "84983e441c3bd26ebaae4aa1f95129e5e54670f1", - }; -static char *bigret= - "34aa973cd4c4daa4f61eeb2bdbad27316534016f"; -#endif - -static char *pt(unsigned char *md); -int main(int argc, char *argv[]) - { - int i,err=0; - char **P,**R; - static unsigned char buf[1000]; - char *p,*r; - EVP_MD_CTX c; - unsigned char md[SHA_DIGEST_LENGTH]; - -#ifdef CHARSET_EBCDIC - ebcdic2ascii(test[0], test[0], strlen(test[0])); - ebcdic2ascii(test[1], test[1], strlen(test[1])); -#endif - - EVP_MD_CTX_init(&c); - P=test; - R=ret; - i=1; - while (*P != NULL) - { - EVP_Digest(*P,strlen((char *)*P),md,NULL,EVP_sha1(), NULL); - p=pt(md); - if (strcmp(p,(char *)*R) != 0) - { - printf("error calculating SHA1 on '%s'\n",*P); - printf("got %s instead of %s\n",p,*R); - err++; - } - else - printf("test %d ok\n",i); - i++; - R++; - P++; - } - - memset(buf,'a',1000); -#ifdef CHARSET_EBCDIC - ebcdic2ascii(buf, buf, 1000); -#endif /*CHARSET_EBCDIC*/ - EVP_DigestInit_ex(&c,EVP_sha1(), NULL); - for (i=0; i<1000; i++) - EVP_DigestUpdate(&c,buf,1000); - EVP_DigestFinal_ex(&c,md,NULL); - p=pt(md); - - r=bigret; - if (strcmp(p,r) != 0) - { - printf("error calculating SHA1 on 'a' * 1000\n"); - printf("got %s instead of %s\n",p,r); - err++; - } - else - printf("test 3 ok\n"); - -#ifdef OPENSSL_SYS_NETWARE - if (err) printf("ERROR: %d\n", err); -#endif - EXIT(err); - EVP_MD_CTX_cleanup(&c); - return(0); - } - -static char *pt(unsigned char *md) - { - int i; - static char buf[80]; - - for (i=0; i<SHA_DIGEST_LENGTH; i++) - sprintf(&(buf[i*2]),"%02x",md[i]); - return(buf); - } -#endif diff --git a/app/openssl/crypto/sha/sha256.c b/app/openssl/crypto/sha/sha256.c deleted file mode 100644 index 8952d876..00000000 --- a/app/openssl/crypto/sha/sha256.c +++ /dev/null @@ -1,282 +0,0 @@ -/* crypto/sha/sha256.c */ -/* ==================================================================== - * Copyright (c) 2004 The OpenSSL Project. All rights reserved - * according to the OpenSSL license [found in ../../LICENSE]. - * ==================================================================== - */ -#include <openssl/opensslconf.h> -#if !defined(OPENSSL_NO_SHA) && !defined(OPENSSL_NO_SHA256) - -#include <stdlib.h> -#include <string.h> - -#include <openssl/crypto.h> -#include <openssl/sha.h> -#include <openssl/opensslv.h> - -const char SHA256_version[]="SHA-256" OPENSSL_VERSION_PTEXT; - -int SHA224_Init (SHA256_CTX *c) - { - memset (c,0,sizeof(*c)); - c->h[0]=0xc1059ed8UL; c->h[1]=0x367cd507UL; - c->h[2]=0x3070dd17UL; c->h[3]=0xf70e5939UL; - c->h[4]=0xffc00b31UL; c->h[5]=0x68581511UL; - c->h[6]=0x64f98fa7UL; c->h[7]=0xbefa4fa4UL; - c->md_len=SHA224_DIGEST_LENGTH; - return 1; - } - -int SHA256_Init (SHA256_CTX *c) - { - memset (c,0,sizeof(*c)); - c->h[0]=0x6a09e667UL; c->h[1]=0xbb67ae85UL; - c->h[2]=0x3c6ef372UL; c->h[3]=0xa54ff53aUL; - c->h[4]=0x510e527fUL; c->h[5]=0x9b05688cUL; - c->h[6]=0x1f83d9abUL; c->h[7]=0x5be0cd19UL; - c->md_len=SHA256_DIGEST_LENGTH; - return 1; - } - -unsigned char *SHA224(const unsigned char *d, size_t n, unsigned char *md) - { - SHA256_CTX c; - static unsigned char m[SHA224_DIGEST_LENGTH]; - - if (md == NULL) md=m; - SHA224_Init(&c); - SHA256_Update(&c,d,n); - SHA256_Final(md,&c); - OPENSSL_cleanse(&c,sizeof(c)); - return(md); - } - -unsigned char *SHA256(const unsigned char *d, size_t n, unsigned char *md) - { - SHA256_CTX c; - static unsigned char m[SHA256_DIGEST_LENGTH]; - - if (md == NULL) md=m; - SHA256_Init(&c); - SHA256_Update(&c,d,n); - SHA256_Final(md,&c); - OPENSSL_cleanse(&c,sizeof(c)); - return(md); - } - -int SHA224_Update(SHA256_CTX *c, const void *data, size_t len) -{ return SHA256_Update (c,data,len); } -int SHA224_Final (unsigned char *md, SHA256_CTX *c) -{ return SHA256_Final (md,c); } - -#define DATA_ORDER_IS_BIG_ENDIAN - -#define HASH_LONG SHA_LONG -#define HASH_CTX SHA256_CTX -#define HASH_CBLOCK SHA_CBLOCK -/* - * Note that FIPS180-2 discusses "Truncation of the Hash Function Output." - * default: case below covers for it. It's not clear however if it's - * permitted to truncate to amount of bytes not divisible by 4. I bet not, - * but if it is, then default: case shall be extended. For reference. - * Idea behind separate cases for pre-defined lenghts is to let the - * compiler decide if it's appropriate to unroll small loops. - */ -#define HASH_MAKE_STRING(c,s) do { \ - unsigned long ll; \ - unsigned int nn; \ - switch ((c)->md_len) \ - { case SHA224_DIGEST_LENGTH: \ - for (nn=0;nn<SHA224_DIGEST_LENGTH/4;nn++) \ - { ll=(c)->h[nn]; HOST_l2c(ll,(s)); } \ - break; \ - case SHA256_DIGEST_LENGTH: \ - for (nn=0;nn<SHA256_DIGEST_LENGTH/4;nn++) \ - { ll=(c)->h[nn]; HOST_l2c(ll,(s)); } \ - break; \ - default: \ - if ((c)->md_len > SHA256_DIGEST_LENGTH) \ - return 0; \ - for (nn=0;nn<(c)->md_len/4;nn++) \ - { ll=(c)->h[nn]; HOST_l2c(ll,(s)); } \ - break; \ - } \ - } while (0) - -#define HASH_UPDATE SHA256_Update -#define HASH_TRANSFORM SHA256_Transform -#define HASH_FINAL SHA256_Final -#define HASH_BLOCK_DATA_ORDER sha256_block_data_order -#ifndef SHA256_ASM -static -#endif -void sha256_block_data_order (SHA256_CTX *ctx, const void *in, size_t num); - -#include "md32_common.h" - -#ifndef SHA256_ASM -static const SHA_LONG K256[64] = { - 0x428a2f98UL,0x71374491UL,0xb5c0fbcfUL,0xe9b5dba5UL, - 0x3956c25bUL,0x59f111f1UL,0x923f82a4UL,0xab1c5ed5UL, - 0xd807aa98UL,0x12835b01UL,0x243185beUL,0x550c7dc3UL, - 0x72be5d74UL,0x80deb1feUL,0x9bdc06a7UL,0xc19bf174UL, - 0xe49b69c1UL,0xefbe4786UL,0x0fc19dc6UL,0x240ca1ccUL, - 0x2de92c6fUL,0x4a7484aaUL,0x5cb0a9dcUL,0x76f988daUL, - 0x983e5152UL,0xa831c66dUL,0xb00327c8UL,0xbf597fc7UL, - 0xc6e00bf3UL,0xd5a79147UL,0x06ca6351UL,0x14292967UL, - 0x27b70a85UL,0x2e1b2138UL,0x4d2c6dfcUL,0x53380d13UL, - 0x650a7354UL,0x766a0abbUL,0x81c2c92eUL,0x92722c85UL, - 0xa2bfe8a1UL,0xa81a664bUL,0xc24b8b70UL,0xc76c51a3UL, - 0xd192e819UL,0xd6990624UL,0xf40e3585UL,0x106aa070UL, - 0x19a4c116UL,0x1e376c08UL,0x2748774cUL,0x34b0bcb5UL, - 0x391c0cb3UL,0x4ed8aa4aUL,0x5b9cca4fUL,0x682e6ff3UL, - 0x748f82eeUL,0x78a5636fUL,0x84c87814UL,0x8cc70208UL, - 0x90befffaUL,0xa4506cebUL,0xbef9a3f7UL,0xc67178f2UL }; - -/* - * FIPS specification refers to right rotations, while our ROTATE macro - * is left one. This is why you might notice that rotation coefficients - * differ from those observed in FIPS document by 32-N... - */ -#define Sigma0(x) (ROTATE((x),30) ^ ROTATE((x),19) ^ ROTATE((x),10)) -#define Sigma1(x) (ROTATE((x),26) ^ ROTATE((x),21) ^ ROTATE((x),7)) -#define sigma0(x) (ROTATE((x),25) ^ ROTATE((x),14) ^ ((x)>>3)) -#define sigma1(x) (ROTATE((x),15) ^ ROTATE((x),13) ^ ((x)>>10)) - -#define Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z))) -#define Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) - -#ifdef OPENSSL_SMALL_FOOTPRINT - -static void sha256_block_data_order (SHA256_CTX *ctx, const void *in, size_t num) - { - unsigned MD32_REG_T a,b,c,d,e,f,g,h,s0,s1,T1,T2; - SHA_LONG X[16],l; - int i; - const unsigned char *data=in; - - while (num--) { - - a = ctx->h[0]; b = ctx->h[1]; c = ctx->h[2]; d = ctx->h[3]; - e = ctx->h[4]; f = ctx->h[5]; g = ctx->h[6]; h = ctx->h[7]; - - for (i=0;i<16;i++) - { - HOST_c2l(data,l); T1 = X[i] = l; - T1 += h + Sigma1(e) + Ch(e,f,g) + K256[i]; - T2 = Sigma0(a) + Maj(a,b,c); - h = g; g = f; f = e; e = d + T1; - d = c; c = b; b = a; a = T1 + T2; - } - - for (;i<64;i++) - { - s0 = X[(i+1)&0x0f]; s0 = sigma0(s0); - s1 = X[(i+14)&0x0f]; s1 = sigma1(s1); - - T1 = X[i&0xf] += s0 + s1 + X[(i+9)&0xf]; - T1 += h + Sigma1(e) + Ch(e,f,g) + K256[i]; - T2 = Sigma0(a) + Maj(a,b,c); - h = g; g = f; f = e; e = d + T1; - d = c; c = b; b = a; a = T1 + T2; - } - - ctx->h[0] += a; ctx->h[1] += b; ctx->h[2] += c; ctx->h[3] += d; - ctx->h[4] += e; ctx->h[5] += f; ctx->h[6] += g; ctx->h[7] += h; - - } -} - -#else - -#define ROUND_00_15(i,a,b,c,d,e,f,g,h) do { \ - T1 += h + Sigma1(e) + Ch(e,f,g) + K256[i]; \ - h = Sigma0(a) + Maj(a,b,c); \ - d += T1; h += T1; } while (0) - -#define ROUND_16_63(i,a,b,c,d,e,f,g,h,X) do { \ - s0 = X[(i+1)&0x0f]; s0 = sigma0(s0); \ - s1 = X[(i+14)&0x0f]; s1 = sigma1(s1); \ - T1 = X[(i)&0x0f] += s0 + s1 + X[(i+9)&0x0f]; \ - ROUND_00_15(i,a,b,c,d,e,f,g,h); } while (0) - -static void sha256_block_data_order (SHA256_CTX *ctx, const void *in, size_t num) - { - unsigned MD32_REG_T a,b,c,d,e,f,g,h,s0,s1,T1; - SHA_LONG X[16]; - int i; - const unsigned char *data=in; - const union { long one; char little; } is_endian = {1}; - - while (num--) { - - a = ctx->h[0]; b = ctx->h[1]; c = ctx->h[2]; d = ctx->h[3]; - e = ctx->h[4]; f = ctx->h[5]; g = ctx->h[6]; h = ctx->h[7]; - - if (!is_endian.little && sizeof(SHA_LONG)==4 && ((size_t)in%4)==0) - { - const SHA_LONG *W=(const SHA_LONG *)data; - - T1 = X[0] = W[0]; ROUND_00_15(0,a,b,c,d,e,f,g,h); - T1 = X[1] = W[1]; ROUND_00_15(1,h,a,b,c,d,e,f,g); - T1 = X[2] = W[2]; ROUND_00_15(2,g,h,a,b,c,d,e,f); - T1 = X[3] = W[3]; ROUND_00_15(3,f,g,h,a,b,c,d,e); - T1 = X[4] = W[4]; ROUND_00_15(4,e,f,g,h,a,b,c,d); - T1 = X[5] = W[5]; ROUND_00_15(5,d,e,f,g,h,a,b,c); - T1 = X[6] = W[6]; ROUND_00_15(6,c,d,e,f,g,h,a,b); - T1 = X[7] = W[7]; ROUND_00_15(7,b,c,d,e,f,g,h,a); - T1 = X[8] = W[8]; ROUND_00_15(8,a,b,c,d,e,f,g,h); - T1 = X[9] = W[9]; ROUND_00_15(9,h,a,b,c,d,e,f,g); - T1 = X[10] = W[10]; ROUND_00_15(10,g,h,a,b,c,d,e,f); - T1 = X[11] = W[11]; ROUND_00_15(11,f,g,h,a,b,c,d,e); - T1 = X[12] = W[12]; ROUND_00_15(12,e,f,g,h,a,b,c,d); - T1 = X[13] = W[13]; ROUND_00_15(13,d,e,f,g,h,a,b,c); - T1 = X[14] = W[14]; ROUND_00_15(14,c,d,e,f,g,h,a,b); - T1 = X[15] = W[15]; ROUND_00_15(15,b,c,d,e,f,g,h,a); - - data += SHA256_CBLOCK; - } - else - { - SHA_LONG l; - - HOST_c2l(data,l); T1 = X[0] = l; ROUND_00_15(0,a,b,c,d,e,f,g,h); - HOST_c2l(data,l); T1 = X[1] = l; ROUND_00_15(1,h,a,b,c,d,e,f,g); - HOST_c2l(data,l); T1 = X[2] = l; ROUND_00_15(2,g,h,a,b,c,d,e,f); - HOST_c2l(data,l); T1 = X[3] = l; ROUND_00_15(3,f,g,h,a,b,c,d,e); - HOST_c2l(data,l); T1 = X[4] = l; ROUND_00_15(4,e,f,g,h,a,b,c,d); - HOST_c2l(data,l); T1 = X[5] = l; ROUND_00_15(5,d,e,f,g,h,a,b,c); - HOST_c2l(data,l); T1 = X[6] = l; ROUND_00_15(6,c,d,e,f,g,h,a,b); - HOST_c2l(data,l); T1 = X[7] = l; ROUND_00_15(7,b,c,d,e,f,g,h,a); - HOST_c2l(data,l); T1 = X[8] = l; ROUND_00_15(8,a,b,c,d,e,f,g,h); - HOST_c2l(data,l); T1 = X[9] = l; ROUND_00_15(9,h,a,b,c,d,e,f,g); - HOST_c2l(data,l); T1 = X[10] = l; ROUND_00_15(10,g,h,a,b,c,d,e,f); - HOST_c2l(data,l); T1 = X[11] = l; ROUND_00_15(11,f,g,h,a,b,c,d,e); - HOST_c2l(data,l); T1 = X[12] = l; ROUND_00_15(12,e,f,g,h,a,b,c,d); - HOST_c2l(data,l); T1 = X[13] = l; ROUND_00_15(13,d,e,f,g,h,a,b,c); - HOST_c2l(data,l); T1 = X[14] = l; ROUND_00_15(14,c,d,e,f,g,h,a,b); - HOST_c2l(data,l); T1 = X[15] = l; ROUND_00_15(15,b,c,d,e,f,g,h,a); - } - - for (i=16;i<64;i+=8) - { - ROUND_16_63(i+0,a,b,c,d,e,f,g,h,X); - ROUND_16_63(i+1,h,a,b,c,d,e,f,g,X); - ROUND_16_63(i+2,g,h,a,b,c,d,e,f,X); - ROUND_16_63(i+3,f,g,h,a,b,c,d,e,X); - ROUND_16_63(i+4,e,f,g,h,a,b,c,d,X); - ROUND_16_63(i+5,d,e,f,g,h,a,b,c,X); - ROUND_16_63(i+6,c,d,e,f,g,h,a,b,X); - ROUND_16_63(i+7,b,c,d,e,f,g,h,a,X); - } - - ctx->h[0] += a; ctx->h[1] += b; ctx->h[2] += c; ctx->h[3] += d; - ctx->h[4] += e; ctx->h[5] += f; ctx->h[6] += g; ctx->h[7] += h; - - } - } - -#endif -#endif /* SHA256_ASM */ - -#endif /* OPENSSL_NO_SHA256 */ diff --git a/app/openssl/crypto/sha/sha256t.c b/app/openssl/crypto/sha/sha256t.c deleted file mode 100644 index 6b4a3bd0..00000000 --- a/app/openssl/crypto/sha/sha256t.c +++ /dev/null @@ -1,147 +0,0 @@ -/* crypto/sha/sha256t.c */ -/* ==================================================================== - * Copyright (c) 2004 The OpenSSL Project. All rights reserved. - * ==================================================================== - */ -#include <stdio.h> -#include <string.h> -#include <stdlib.h> - -#include <openssl/sha.h> -#include <openssl/evp.h> - -#if defined(OPENSSL_NO_SHA) || defined(OPENSSL_NO_SHA256) -int main(int argc, char *argv[]) -{ - printf("No SHA256 support\n"); - return(0); -} -#else - -unsigned char app_b1[SHA256_DIGEST_LENGTH] = { - 0xba,0x78,0x16,0xbf,0x8f,0x01,0xcf,0xea, - 0x41,0x41,0x40,0xde,0x5d,0xae,0x22,0x23, - 0xb0,0x03,0x61,0xa3,0x96,0x17,0x7a,0x9c, - 0xb4,0x10,0xff,0x61,0xf2,0x00,0x15,0xad }; - -unsigned char app_b2[SHA256_DIGEST_LENGTH] = { - 0x24,0x8d,0x6a,0x61,0xd2,0x06,0x38,0xb8, - 0xe5,0xc0,0x26,0x93,0x0c,0x3e,0x60,0x39, - 0xa3,0x3c,0xe4,0x59,0x64,0xff,0x21,0x67, - 0xf6,0xec,0xed,0xd4,0x19,0xdb,0x06,0xc1 }; - -unsigned char app_b3[SHA256_DIGEST_LENGTH] = { - 0xcd,0xc7,0x6e,0x5c,0x99,0x14,0xfb,0x92, - 0x81,0xa1,0xc7,0xe2,0x84,0xd7,0x3e,0x67, - 0xf1,0x80,0x9a,0x48,0xa4,0x97,0x20,0x0e, - 0x04,0x6d,0x39,0xcc,0xc7,0x11,0x2c,0xd0 }; - -unsigned char addenum_1[SHA224_DIGEST_LENGTH] = { - 0x23,0x09,0x7d,0x22,0x34,0x05,0xd8,0x22, - 0x86,0x42,0xa4,0x77,0xbd,0xa2,0x55,0xb3, - 0x2a,0xad,0xbc,0xe4,0xbd,0xa0,0xb3,0xf7, - 0xe3,0x6c,0x9d,0xa7 }; - -unsigned char addenum_2[SHA224_DIGEST_LENGTH] = { - 0x75,0x38,0x8b,0x16,0x51,0x27,0x76,0xcc, - 0x5d,0xba,0x5d,0xa1,0xfd,0x89,0x01,0x50, - 0xb0,0xc6,0x45,0x5c,0xb4,0xf5,0x8b,0x19, - 0x52,0x52,0x25,0x25 }; - -unsigned char addenum_3[SHA224_DIGEST_LENGTH] = { - 0x20,0x79,0x46,0x55,0x98,0x0c,0x91,0xd8, - 0xbb,0xb4,0xc1,0xea,0x97,0x61,0x8a,0x4b, - 0xf0,0x3f,0x42,0x58,0x19,0x48,0xb2,0xee, - 0x4e,0xe7,0xad,0x67 }; - -int main (int argc,char **argv) -{ unsigned char md[SHA256_DIGEST_LENGTH]; - int i; - EVP_MD_CTX evp; - - fprintf(stdout,"Testing SHA-256 "); - - EVP_Digest ("abc",3,md,NULL,EVP_sha256(),NULL); - if (memcmp(md,app_b1,sizeof(app_b1))) - { fflush(stdout); - fprintf(stderr,"\nTEST 1 of 3 failed.\n"); - return 1; - } - else - fprintf(stdout,"."); fflush(stdout); - - EVP_Digest ("abcdbcde""cdefdefg""efghfghi""ghijhijk" - "ijkljklm""klmnlmno""mnopnopq",56,md,NULL,EVP_sha256(),NULL); - if (memcmp(md,app_b2,sizeof(app_b2))) - { fflush(stdout); - fprintf(stderr,"\nTEST 2 of 3 failed.\n"); - return 1; - } - else - fprintf(stdout,"."); fflush(stdout); - - EVP_MD_CTX_init (&evp); - EVP_DigestInit_ex (&evp,EVP_sha256(),NULL); - for (i=0;i<1000000;i+=160) - EVP_DigestUpdate (&evp, "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa", - (1000000-i)<160?1000000-i:160); - EVP_DigestFinal_ex (&evp,md,NULL); - EVP_MD_CTX_cleanup (&evp); - - if (memcmp(md,app_b3,sizeof(app_b3))) - { fflush(stdout); - fprintf(stderr,"\nTEST 3 of 3 failed.\n"); - return 1; - } - else - fprintf(stdout,"."); fflush(stdout); - - fprintf(stdout," passed.\n"); fflush(stdout); - - fprintf(stdout,"Testing SHA-224 "); - - EVP_Digest ("abc",3,md,NULL,EVP_sha224(),NULL); - if (memcmp(md,addenum_1,sizeof(addenum_1))) - { fflush(stdout); - fprintf(stderr,"\nTEST 1 of 3 failed.\n"); - return 1; - } - else - fprintf(stdout,"."); fflush(stdout); - - EVP_Digest ("abcdbcde""cdefdefg""efghfghi""ghijhijk" - "ijkljklm""klmnlmno""mnopnopq",56,md,NULL,EVP_sha224(),NULL); - if (memcmp(md,addenum_2,sizeof(addenum_2))) - { fflush(stdout); - fprintf(stderr,"\nTEST 2 of 3 failed.\n"); - return 1; - } - else - fprintf(stdout,"."); fflush(stdout); - - EVP_MD_CTX_init (&evp); - EVP_DigestInit_ex (&evp,EVP_sha224(),NULL); - for (i=0;i<1000000;i+=64) - EVP_DigestUpdate (&evp, "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa", - (1000000-i)<64?1000000-i:64); - EVP_DigestFinal_ex (&evp,md,NULL); - EVP_MD_CTX_cleanup (&evp); - - if (memcmp(md,addenum_3,sizeof(addenum_3))) - { fflush(stdout); - fprintf(stderr,"\nTEST 3 of 3 failed.\n"); - return 1; - } - else - fprintf(stdout,"."); fflush(stdout); - - fprintf(stdout," passed.\n"); fflush(stdout); - - return 0; -} -#endif diff --git a/app/openssl/crypto/sha/sha512.c b/app/openssl/crypto/sha/sha512.c deleted file mode 100644 index cbc0e58c..00000000 --- a/app/openssl/crypto/sha/sha512.c +++ /dev/null @@ -1,641 +0,0 @@ -/* crypto/sha/sha512.c */ -/* ==================================================================== - * Copyright (c) 2004 The OpenSSL Project. All rights reserved - * according to the OpenSSL license [found in ../../LICENSE]. - * ==================================================================== - */ -#include <openssl/opensslconf.h> -#if !defined(OPENSSL_NO_SHA) && !defined(OPENSSL_NO_SHA512) -/* - * IMPLEMENTATION NOTES. - * - * As you might have noticed 32-bit hash algorithms: - * - * - permit SHA_LONG to be wider than 32-bit (case on CRAY); - * - optimized versions implement two transform functions: one operating - * on [aligned] data in host byte order and one - on data in input - * stream byte order; - * - share common byte-order neutral collector and padding function - * implementations, ../md32_common.h; - * - * Neither of the above applies to this SHA-512 implementations. Reasons - * [in reverse order] are: - * - * - it's the only 64-bit hash algorithm for the moment of this writing, - * there is no need for common collector/padding implementation [yet]; - * - by supporting only one transform function [which operates on - * *aligned* data in input stream byte order, big-endian in this case] - * we minimize burden of maintenance in two ways: a) collector/padding - * function is simpler; b) only one transform function to stare at; - * - SHA_LONG64 is required to be exactly 64-bit in order to be able to - * apply a number of optimizations to mitigate potential performance - * penalties caused by previous design decision; - * - * Caveat lector. - * - * Implementation relies on the fact that "long long" is 64-bit on - * both 32- and 64-bit platforms. If some compiler vendor comes up - * with 128-bit long long, adjustment to sha.h would be required. - * As this implementation relies on 64-bit integer type, it's totally - * inappropriate for platforms which don't support it, most notably - * 16-bit platforms. - * <appro@fy.chalmers.se> - */ -#include <stdlib.h> -#include <string.h> - -#include <openssl/crypto.h> -#include <openssl/sha.h> -#include <openssl/opensslv.h> - -#include "cryptlib.h" - -const char SHA512_version[]="SHA-512" OPENSSL_VERSION_PTEXT; - -#if defined(__i386) || defined(__i386__) || defined(_M_IX86) || \ - defined(__x86_64) || defined(_M_AMD64) || defined(_M_X64) || \ - defined(__s390__) || defined(__s390x__) || \ - defined(SHA512_ASM) -#define SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA -#endif - -int SHA384_Init (SHA512_CTX *c) - { -#if defined(SHA512_ASM) && (defined(__arm__) || defined(__arm)) - /* maintain dword order required by assembler module */ - unsigned int *h = (unsigned int *)c->h; - - h[0] = 0xcbbb9d5d; h[1] = 0xc1059ed8; - h[2] = 0x629a292a; h[3] = 0x367cd507; - h[4] = 0x9159015a; h[5] = 0x3070dd17; - h[6] = 0x152fecd8; h[7] = 0xf70e5939; - h[8] = 0x67332667; h[9] = 0xffc00b31; - h[10] = 0x8eb44a87; h[11] = 0x68581511; - h[12] = 0xdb0c2e0d; h[13] = 0x64f98fa7; - h[14] = 0x47b5481d; h[15] = 0xbefa4fa4; -#else - c->h[0]=U64(0xcbbb9d5dc1059ed8); - c->h[1]=U64(0x629a292a367cd507); - c->h[2]=U64(0x9159015a3070dd17); - c->h[3]=U64(0x152fecd8f70e5939); - c->h[4]=U64(0x67332667ffc00b31); - c->h[5]=U64(0x8eb44a8768581511); - c->h[6]=U64(0xdb0c2e0d64f98fa7); - c->h[7]=U64(0x47b5481dbefa4fa4); -#endif - c->Nl=0; c->Nh=0; - c->num=0; c->md_len=SHA384_DIGEST_LENGTH; - return 1; - } - -int SHA512_Init (SHA512_CTX *c) - { -#if defined(SHA512_ASM) && (defined(__arm__) || defined(__arm)) - /* maintain dword order required by assembler module */ - unsigned int *h = (unsigned int *)c->h; - - h[0] = 0x6a09e667; h[1] = 0xf3bcc908; - h[2] = 0xbb67ae85; h[3] = 0x84caa73b; - h[4] = 0x3c6ef372; h[5] = 0xfe94f82b; - h[6] = 0xa54ff53a; h[7] = 0x5f1d36f1; - h[8] = 0x510e527f; h[9] = 0xade682d1; - h[10] = 0x9b05688c; h[11] = 0x2b3e6c1f; - h[12] = 0x1f83d9ab; h[13] = 0xfb41bd6b; - h[14] = 0x5be0cd19; h[15] = 0x137e2179; -#else - c->h[0]=U64(0x6a09e667f3bcc908); - c->h[1]=U64(0xbb67ae8584caa73b); - c->h[2]=U64(0x3c6ef372fe94f82b); - c->h[3]=U64(0xa54ff53a5f1d36f1); - c->h[4]=U64(0x510e527fade682d1); - c->h[5]=U64(0x9b05688c2b3e6c1f); - c->h[6]=U64(0x1f83d9abfb41bd6b); - c->h[7]=U64(0x5be0cd19137e2179); -#endif - c->Nl=0; c->Nh=0; - c->num=0; c->md_len=SHA512_DIGEST_LENGTH; - return 1; - } - -#ifndef SHA512_ASM -static -#endif -void sha512_block_data_order (SHA512_CTX *ctx, const void *in, size_t num); - -int SHA512_Final (unsigned char *md, SHA512_CTX *c) - { - unsigned char *p=(unsigned char *)c->u.p; - size_t n=c->num; - - p[n]=0x80; /* There always is a room for one */ - n++; - if (n > (sizeof(c->u)-16)) - memset (p+n,0,sizeof(c->u)-n), n=0, - sha512_block_data_order (c,p,1); - - memset (p+n,0,sizeof(c->u)-16-n); -#ifdef B_ENDIAN - c->u.d[SHA_LBLOCK-2] = c->Nh; - c->u.d[SHA_LBLOCK-1] = c->Nl; -#else - p[sizeof(c->u)-1] = (unsigned char)(c->Nl); - p[sizeof(c->u)-2] = (unsigned char)(c->Nl>>8); - p[sizeof(c->u)-3] = (unsigned char)(c->Nl>>16); - p[sizeof(c->u)-4] = (unsigned char)(c->Nl>>24); - p[sizeof(c->u)-5] = (unsigned char)(c->Nl>>32); - p[sizeof(c->u)-6] = (unsigned char)(c->Nl>>40); - p[sizeof(c->u)-7] = (unsigned char)(c->Nl>>48); - p[sizeof(c->u)-8] = (unsigned char)(c->Nl>>56); - p[sizeof(c->u)-9] = (unsigned char)(c->Nh); - p[sizeof(c->u)-10] = (unsigned char)(c->Nh>>8); - p[sizeof(c->u)-11] = (unsigned char)(c->Nh>>16); - p[sizeof(c->u)-12] = (unsigned char)(c->Nh>>24); - p[sizeof(c->u)-13] = (unsigned char)(c->Nh>>32); - p[sizeof(c->u)-14] = (unsigned char)(c->Nh>>40); - p[sizeof(c->u)-15] = (unsigned char)(c->Nh>>48); - p[sizeof(c->u)-16] = (unsigned char)(c->Nh>>56); -#endif - - sha512_block_data_order (c,p,1); - - if (md==0) return 0; - -#if defined(SHA512_ASM) && (defined(__arm__) || defined(__arm)) - /* recall assembler dword order... */ - n = c->md_len; - if (n == SHA384_DIGEST_LENGTH || n == SHA512_DIGEST_LENGTH) - { - unsigned int *h = (unsigned int *)c->h, t; - - for (n/=4;n;n--) - { - t = *(h++); - *(md++) = (unsigned char)(t>>24); - *(md++) = (unsigned char)(t>>16); - *(md++) = (unsigned char)(t>>8); - *(md++) = (unsigned char)(t); - } - } - else return 0; -#else - switch (c->md_len) - { - /* Let compiler decide if it's appropriate to unroll... */ - case SHA384_DIGEST_LENGTH: - for (n=0;n<SHA384_DIGEST_LENGTH/8;n++) - { - SHA_LONG64 t = c->h[n]; - - *(md++) = (unsigned char)(t>>56); - *(md++) = (unsigned char)(t>>48); - *(md++) = (unsigned char)(t>>40); - *(md++) = (unsigned char)(t>>32); - *(md++) = (unsigned char)(t>>24); - *(md++) = (unsigned char)(t>>16); - *(md++) = (unsigned char)(t>>8); - *(md++) = (unsigned char)(t); - } - break; - case SHA512_DIGEST_LENGTH: - for (n=0;n<SHA512_DIGEST_LENGTH/8;n++) - { - SHA_LONG64 t = c->h[n]; - - *(md++) = (unsigned char)(t>>56); - *(md++) = (unsigned char)(t>>48); - *(md++) = (unsigned char)(t>>40); - *(md++) = (unsigned char)(t>>32); - *(md++) = (unsigned char)(t>>24); - *(md++) = (unsigned char)(t>>16); - *(md++) = (unsigned char)(t>>8); - *(md++) = (unsigned char)(t); - } - break; - /* ... as well as make sure md_len is not abused. */ - default: return 0; - } -#endif - return 1; - } - -int SHA384_Final (unsigned char *md,SHA512_CTX *c) -{ return SHA512_Final (md,c); } - -int SHA512_Update (SHA512_CTX *c, const void *_data, size_t len) - { - SHA_LONG64 l; - unsigned char *p=c->u.p; - const unsigned char *data=(const unsigned char *)_data; - - if (len==0) return 1; - - l = (c->Nl+(((SHA_LONG64)len)<<3))&U64(0xffffffffffffffff); - if (l < c->Nl) c->Nh++; - if (sizeof(len)>=8) c->Nh+=(((SHA_LONG64)len)>>61); - c->Nl=l; - - if (c->num != 0) - { - size_t n = sizeof(c->u) - c->num; - - if (len < n) - { - memcpy (p+c->num,data,len), c->num += (unsigned int)len; - return 1; - } - else { - memcpy (p+c->num,data,n), c->num = 0; - len-=n, data+=n; - sha512_block_data_order (c,p,1); - } - } - - if (len >= sizeof(c->u)) - { -#ifndef SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA - if ((size_t)data%sizeof(c->u.d[0]) != 0) - while (len >= sizeof(c->u)) - memcpy (p,data,sizeof(c->u)), - sha512_block_data_order (c,p,1), - len -= sizeof(c->u), - data += sizeof(c->u); - else -#endif - sha512_block_data_order (c,data,len/sizeof(c->u)), - data += len, - len %= sizeof(c->u), - data -= len; - } - - if (len != 0) memcpy (p,data,len), c->num = (int)len; - - return 1; - } - -int SHA384_Update (SHA512_CTX *c, const void *data, size_t len) -{ return SHA512_Update (c,data,len); } - -void SHA512_Transform (SHA512_CTX *c, const unsigned char *data) -{ sha512_block_data_order (c,data,1); } - -unsigned char *SHA384(const unsigned char *d, size_t n, unsigned char *md) - { - SHA512_CTX c; - static unsigned char m[SHA384_DIGEST_LENGTH]; - - if (md == NULL) md=m; - SHA384_Init(&c); - SHA512_Update(&c,d,n); - SHA512_Final(md,&c); - OPENSSL_cleanse(&c,sizeof(c)); - return(md); - } - -unsigned char *SHA512(const unsigned char *d, size_t n, unsigned char *md) - { - SHA512_CTX c; - static unsigned char m[SHA512_DIGEST_LENGTH]; - - if (md == NULL) md=m; - SHA512_Init(&c); - SHA512_Update(&c,d,n); - SHA512_Final(md,&c); - OPENSSL_cleanse(&c,sizeof(c)); - return(md); - } - -#ifndef SHA512_ASM -static const SHA_LONG64 K512[80] = { - U64(0x428a2f98d728ae22),U64(0x7137449123ef65cd), - U64(0xb5c0fbcfec4d3b2f),U64(0xe9b5dba58189dbbc), - U64(0x3956c25bf348b538),U64(0x59f111f1b605d019), - U64(0x923f82a4af194f9b),U64(0xab1c5ed5da6d8118), - U64(0xd807aa98a3030242),U64(0x12835b0145706fbe), - U64(0x243185be4ee4b28c),U64(0x550c7dc3d5ffb4e2), - U64(0x72be5d74f27b896f),U64(0x80deb1fe3b1696b1), - U64(0x9bdc06a725c71235),U64(0xc19bf174cf692694), - U64(0xe49b69c19ef14ad2),U64(0xefbe4786384f25e3), - U64(0x0fc19dc68b8cd5b5),U64(0x240ca1cc77ac9c65), - U64(0x2de92c6f592b0275),U64(0x4a7484aa6ea6e483), - U64(0x5cb0a9dcbd41fbd4),U64(0x76f988da831153b5), - U64(0x983e5152ee66dfab),U64(0xa831c66d2db43210), - U64(0xb00327c898fb213f),U64(0xbf597fc7beef0ee4), - U64(0xc6e00bf33da88fc2),U64(0xd5a79147930aa725), - U64(0x06ca6351e003826f),U64(0x142929670a0e6e70), - U64(0x27b70a8546d22ffc),U64(0x2e1b21385c26c926), - U64(0x4d2c6dfc5ac42aed),U64(0x53380d139d95b3df), - U64(0x650a73548baf63de),U64(0x766a0abb3c77b2a8), - U64(0x81c2c92e47edaee6),U64(0x92722c851482353b), - U64(0xa2bfe8a14cf10364),U64(0xa81a664bbc423001), - U64(0xc24b8b70d0f89791),U64(0xc76c51a30654be30), - U64(0xd192e819d6ef5218),U64(0xd69906245565a910), - U64(0xf40e35855771202a),U64(0x106aa07032bbd1b8), - U64(0x19a4c116b8d2d0c8),U64(0x1e376c085141ab53), - U64(0x2748774cdf8eeb99),U64(0x34b0bcb5e19b48a8), - U64(0x391c0cb3c5c95a63),U64(0x4ed8aa4ae3418acb), - U64(0x5b9cca4f7763e373),U64(0x682e6ff3d6b2b8a3), - U64(0x748f82ee5defb2fc),U64(0x78a5636f43172f60), - U64(0x84c87814a1f0ab72),U64(0x8cc702081a6439ec), - U64(0x90befffa23631e28),U64(0xa4506cebde82bde9), - U64(0xbef9a3f7b2c67915),U64(0xc67178f2e372532b), - U64(0xca273eceea26619c),U64(0xd186b8c721c0c207), - U64(0xeada7dd6cde0eb1e),U64(0xf57d4f7fee6ed178), - U64(0x06f067aa72176fba),U64(0x0a637dc5a2c898a6), - U64(0x113f9804bef90dae),U64(0x1b710b35131c471b), - U64(0x28db77f523047d84),U64(0x32caab7b40c72493), - U64(0x3c9ebe0a15c9bebc),U64(0x431d67c49c100d4c), - U64(0x4cc5d4becb3e42b6),U64(0x597f299cfc657e2a), - U64(0x5fcb6fab3ad6faec),U64(0x6c44198c4a475817) }; - -#ifndef PEDANTIC -# if defined(__GNUC__) && __GNUC__>=2 && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) -# if defined(__x86_64) || defined(__x86_64__) -# define ROTR(a,n) ({ SHA_LONG64 ret; \ - asm ("rorq %1,%0" \ - : "=r"(ret) \ - : "J"(n),"0"(a) \ - : "cc"); ret; }) -# if !defined(B_ENDIAN) -# define PULL64(x) ({ SHA_LONG64 ret=*((const SHA_LONG64 *)(&(x))); \ - asm ("bswapq %0" \ - : "=r"(ret) \ - : "0"(ret)); ret; }) -# endif -# elif (defined(__i386) || defined(__i386__)) && !defined(B_ENDIAN) -# if defined(I386_ONLY) -# define PULL64(x) ({ const unsigned int *p=(const unsigned int *)(&(x));\ - unsigned int hi=p[0],lo=p[1]; \ - asm("xchgb %%ah,%%al;xchgb %%dh,%%dl;"\ - "roll $16,%%eax; roll $16,%%edx; "\ - "xchgb %%ah,%%al;xchgb %%dh,%%dl;" \ - : "=a"(lo),"=d"(hi) \ - : "0"(lo),"1"(hi) : "cc"); \ - ((SHA_LONG64)hi)<<32|lo; }) -# else -# define PULL64(x) ({ const unsigned int *p=(const unsigned int *)(&(x));\ - unsigned int hi=p[0],lo=p[1]; \ - asm ("bswapl %0; bswapl %1;" \ - : "=r"(lo),"=r"(hi) \ - : "0"(lo),"1"(hi)); \ - ((SHA_LONG64)hi)<<32|lo; }) -# endif -# elif (defined(_ARCH_PPC) && defined(__64BIT__)) || defined(_ARCH_PPC64) -# define ROTR(a,n) ({ SHA_LONG64 ret; \ - asm ("rotrdi %0,%1,%2" \ - : "=r"(ret) \ - : "r"(a),"K"(n)); ret; }) -# endif -# elif defined(_MSC_VER) -# if defined(_WIN64) /* applies to both IA-64 and AMD64 */ -# pragma intrinsic(_rotr64) -# define ROTR(a,n) _rotr64((a),n) -# endif -# if defined(_M_IX86) && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) -# if defined(I386_ONLY) - static SHA_LONG64 __fastcall __pull64be(const void *x) - { _asm mov edx, [ecx + 0] - _asm mov eax, [ecx + 4] - _asm xchg dh,dl - _asm xchg ah,al - _asm rol edx,16 - _asm rol eax,16 - _asm xchg dh,dl - _asm xchg ah,al - } -# else - static SHA_LONG64 __fastcall __pull64be(const void *x) - { _asm mov edx, [ecx + 0] - _asm mov eax, [ecx + 4] - _asm bswap edx - _asm bswap eax - } -# endif -# define PULL64(x) __pull64be(&(x)) -# if _MSC_VER<=1200 -# pragma inline_depth(0) -# endif -# endif -# endif -#endif - -#ifndef PULL64 -#define B(x,j) (((SHA_LONG64)(*(((const unsigned char *)(&x))+j)))<<((7-j)*8)) -#define PULL64(x) (B(x,0)|B(x,1)|B(x,2)|B(x,3)|B(x,4)|B(x,5)|B(x,6)|B(x,7)) -#endif - -#ifndef ROTR -#define ROTR(x,s) (((x)>>s) | (x)<<(64-s)) -#endif - -#define Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) -#define Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) -#define sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) -#define sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) - -#define Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z))) -#define Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) - - -#if defined(__i386) || defined(__i386__) || defined(_M_IX86) -/* - * This code should give better results on 32-bit CPU with less than - * ~24 registers, both size and performance wise... - */ -static void sha512_block_data_order (SHA512_CTX *ctx, const void *in, size_t num) - { - const SHA_LONG64 *W=in; - SHA_LONG64 A,E,T; - SHA_LONG64 X[9+80],*F; - int i; - - while (num--) { - - F = X+80; - A = ctx->h[0]; F[1] = ctx->h[1]; - F[2] = ctx->h[2]; F[3] = ctx->h[3]; - E = ctx->h[4]; F[5] = ctx->h[5]; - F[6] = ctx->h[6]; F[7] = ctx->h[7]; - - for (i=0;i<16;i++,F--) - { -#ifdef B_ENDIAN - T = W[i]; -#else - T = PULL64(W[i]); -#endif - F[0] = A; - F[4] = E; - F[8] = T; - T += F[7] + Sigma1(E) + Ch(E,F[5],F[6]) + K512[i]; - E = F[3] + T; - A = T + Sigma0(A) + Maj(A,F[1],F[2]); - } - - for (;i<80;i++,F--) - { - T = sigma0(F[8+16-1]); - T += sigma1(F[8+16-14]); - T += F[8+16] + F[8+16-9]; - - F[0] = A; - F[4] = E; - F[8] = T; - T += F[7] + Sigma1(E) + Ch(E,F[5],F[6]) + K512[i]; - E = F[3] + T; - A = T + Sigma0(A) + Maj(A,F[1],F[2]); - } - - ctx->h[0] += A; ctx->h[1] += F[1]; - ctx->h[2] += F[2]; ctx->h[3] += F[3]; - ctx->h[4] += E; ctx->h[5] += F[5]; - ctx->h[6] += F[6]; ctx->h[7] += F[7]; - - W+=SHA_LBLOCK; - } - } - -#elif defined(OPENSSL_SMALL_FOOTPRINT) - -static void sha512_block_data_order (SHA512_CTX *ctx, const void *in, size_t num) - { - const SHA_LONG64 *W=in; - SHA_LONG64 a,b,c,d,e,f,g,h,s0,s1,T1,T2; - SHA_LONG64 X[16]; - int i; - - while (num--) { - - a = ctx->h[0]; b = ctx->h[1]; c = ctx->h[2]; d = ctx->h[3]; - e = ctx->h[4]; f = ctx->h[5]; g = ctx->h[6]; h = ctx->h[7]; - - for (i=0;i<16;i++) - { -#ifdef B_ENDIAN - T1 = X[i] = W[i]; -#else - T1 = X[i] = PULL64(W[i]); -#endif - T1 += h + Sigma1(e) + Ch(e,f,g) + K512[i]; - T2 = Sigma0(a) + Maj(a,b,c); - h = g; g = f; f = e; e = d + T1; - d = c; c = b; b = a; a = T1 + T2; - } - - for (;i<80;i++) - { - s0 = X[(i+1)&0x0f]; s0 = sigma0(s0); - s1 = X[(i+14)&0x0f]; s1 = sigma1(s1); - - T1 = X[i&0xf] += s0 + s1 + X[(i+9)&0xf]; - T1 += h + Sigma1(e) + Ch(e,f,g) + K512[i]; - T2 = Sigma0(a) + Maj(a,b,c); - h = g; g = f; f = e; e = d + T1; - d = c; c = b; b = a; a = T1 + T2; - } - - ctx->h[0] += a; ctx->h[1] += b; ctx->h[2] += c; ctx->h[3] += d; - ctx->h[4] += e; ctx->h[5] += f; ctx->h[6] += g; ctx->h[7] += h; - - W+=SHA_LBLOCK; - } - } - -#else - -#define ROUND_00_15(i,a,b,c,d,e,f,g,h) do { \ - T1 += h + Sigma1(e) + Ch(e,f,g) + K512[i]; \ - h = Sigma0(a) + Maj(a,b,c); \ - d += T1; h += T1; } while (0) - -#define ROUND_16_80(i,j,a,b,c,d,e,f,g,h,X) do { \ - s0 = X[(j+1)&0x0f]; s0 = sigma0(s0); \ - s1 = X[(j+14)&0x0f]; s1 = sigma1(s1); \ - T1 = X[(j)&0x0f] += s0 + s1 + X[(j+9)&0x0f]; \ - ROUND_00_15(i+j,a,b,c,d,e,f,g,h); } while (0) - -static void sha512_block_data_order (SHA512_CTX *ctx, const void *in, size_t num) - { - const SHA_LONG64 *W=in; - SHA_LONG64 a,b,c,d,e,f,g,h,s0,s1,T1; - SHA_LONG64 X[16]; - int i; - - while (num--) { - - a = ctx->h[0]; b = ctx->h[1]; c = ctx->h[2]; d = ctx->h[3]; - e = ctx->h[4]; f = ctx->h[5]; g = ctx->h[6]; h = ctx->h[7]; - -#ifdef B_ENDIAN - T1 = X[0] = W[0]; ROUND_00_15(0,a,b,c,d,e,f,g,h); - T1 = X[1] = W[1]; ROUND_00_15(1,h,a,b,c,d,e,f,g); - T1 = X[2] = W[2]; ROUND_00_15(2,g,h,a,b,c,d,e,f); - T1 = X[3] = W[3]; ROUND_00_15(3,f,g,h,a,b,c,d,e); - T1 = X[4] = W[4]; ROUND_00_15(4,e,f,g,h,a,b,c,d); - T1 = X[5] = W[5]; ROUND_00_15(5,d,e,f,g,h,a,b,c); - T1 = X[6] = W[6]; ROUND_00_15(6,c,d,e,f,g,h,a,b); - T1 = X[7] = W[7]; ROUND_00_15(7,b,c,d,e,f,g,h,a); - T1 = X[8] = W[8]; ROUND_00_15(8,a,b,c,d,e,f,g,h); - T1 = X[9] = W[9]; ROUND_00_15(9,h,a,b,c,d,e,f,g); - T1 = X[10] = W[10]; ROUND_00_15(10,g,h,a,b,c,d,e,f); - T1 = X[11] = W[11]; ROUND_00_15(11,f,g,h,a,b,c,d,e); - T1 = X[12] = W[12]; ROUND_00_15(12,e,f,g,h,a,b,c,d); - T1 = X[13] = W[13]; ROUND_00_15(13,d,e,f,g,h,a,b,c); - T1 = X[14] = W[14]; ROUND_00_15(14,c,d,e,f,g,h,a,b); - T1 = X[15] = W[15]; ROUND_00_15(15,b,c,d,e,f,g,h,a); -#else - T1 = X[0] = PULL64(W[0]); ROUND_00_15(0,a,b,c,d,e,f,g,h); - T1 = X[1] = PULL64(W[1]); ROUND_00_15(1,h,a,b,c,d,e,f,g); - T1 = X[2] = PULL64(W[2]); ROUND_00_15(2,g,h,a,b,c,d,e,f); - T1 = X[3] = PULL64(W[3]); ROUND_00_15(3,f,g,h,a,b,c,d,e); - T1 = X[4] = PULL64(W[4]); ROUND_00_15(4,e,f,g,h,a,b,c,d); - T1 = X[5] = PULL64(W[5]); ROUND_00_15(5,d,e,f,g,h,a,b,c); - T1 = X[6] = PULL64(W[6]); ROUND_00_15(6,c,d,e,f,g,h,a,b); - T1 = X[7] = PULL64(W[7]); ROUND_00_15(7,b,c,d,e,f,g,h,a); - T1 = X[8] = PULL64(W[8]); ROUND_00_15(8,a,b,c,d,e,f,g,h); - T1 = X[9] = PULL64(W[9]); ROUND_00_15(9,h,a,b,c,d,e,f,g); - T1 = X[10] = PULL64(W[10]); ROUND_00_15(10,g,h,a,b,c,d,e,f); - T1 = X[11] = PULL64(W[11]); ROUND_00_15(11,f,g,h,a,b,c,d,e); - T1 = X[12] = PULL64(W[12]); ROUND_00_15(12,e,f,g,h,a,b,c,d); - T1 = X[13] = PULL64(W[13]); ROUND_00_15(13,d,e,f,g,h,a,b,c); - T1 = X[14] = PULL64(W[14]); ROUND_00_15(14,c,d,e,f,g,h,a,b); - T1 = X[15] = PULL64(W[15]); ROUND_00_15(15,b,c,d,e,f,g,h,a); -#endif - - for (i=16;i<80;i+=16) - { - ROUND_16_80(i, 0,a,b,c,d,e,f,g,h,X); - ROUND_16_80(i, 1,h,a,b,c,d,e,f,g,X); - ROUND_16_80(i, 2,g,h,a,b,c,d,e,f,X); - ROUND_16_80(i, 3,f,g,h,a,b,c,d,e,X); - ROUND_16_80(i, 4,e,f,g,h,a,b,c,d,X); - ROUND_16_80(i, 5,d,e,f,g,h,a,b,c,X); - ROUND_16_80(i, 6,c,d,e,f,g,h,a,b,X); - ROUND_16_80(i, 7,b,c,d,e,f,g,h,a,X); - ROUND_16_80(i, 8,a,b,c,d,e,f,g,h,X); - ROUND_16_80(i, 9,h,a,b,c,d,e,f,g,X); - ROUND_16_80(i,10,g,h,a,b,c,d,e,f,X); - ROUND_16_80(i,11,f,g,h,a,b,c,d,e,X); - ROUND_16_80(i,12,e,f,g,h,a,b,c,d,X); - ROUND_16_80(i,13,d,e,f,g,h,a,b,c,X); - ROUND_16_80(i,14,c,d,e,f,g,h,a,b,X); - ROUND_16_80(i,15,b,c,d,e,f,g,h,a,X); - } - - ctx->h[0] += a; ctx->h[1] += b; ctx->h[2] += c; ctx->h[3] += d; - ctx->h[4] += e; ctx->h[5] += f; ctx->h[6] += g; ctx->h[7] += h; - - W+=SHA_LBLOCK; - } - } - -#endif - -#endif /* SHA512_ASM */ - -#else /* !OPENSSL_NO_SHA512 */ - -#if defined(PEDANTIC) || defined(__DECC) || defined(OPENSSL_SYS_MACOSX) -static void *dummy=&dummy; -#endif - -#endif /* !OPENSSL_NO_SHA512 */ diff --git a/app/openssl/crypto/sha/sha512t.c b/app/openssl/crypto/sha/sha512t.c deleted file mode 100644 index 210041d4..00000000 --- a/app/openssl/crypto/sha/sha512t.c +++ /dev/null @@ -1,184 +0,0 @@ -/* crypto/sha/sha512t.c */ -/* ==================================================================== - * Copyright (c) 2004 The OpenSSL Project. All rights reserved. - * ==================================================================== - */ -#include <stdio.h> -#include <string.h> -#include <stdlib.h> - -#include <openssl/sha.h> -#include <openssl/evp.h> -#include <openssl/crypto.h> - -#if defined(OPENSSL_NO_SHA) || defined(OPENSSL_NO_SHA512) -int main(int argc, char *argv[]) -{ - printf("No SHA512 support\n"); - return(0); -} -#else - -unsigned char app_c1[SHA512_DIGEST_LENGTH] = { - 0xdd,0xaf,0x35,0xa1,0x93,0x61,0x7a,0xba, - 0xcc,0x41,0x73,0x49,0xae,0x20,0x41,0x31, - 0x12,0xe6,0xfa,0x4e,0x89,0xa9,0x7e,0xa2, - 0x0a,0x9e,0xee,0xe6,0x4b,0x55,0xd3,0x9a, - 0x21,0x92,0x99,0x2a,0x27,0x4f,0xc1,0xa8, - 0x36,0xba,0x3c,0x23,0xa3,0xfe,0xeb,0xbd, - 0x45,0x4d,0x44,0x23,0x64,0x3c,0xe8,0x0e, - 0x2a,0x9a,0xc9,0x4f,0xa5,0x4c,0xa4,0x9f }; - -unsigned char app_c2[SHA512_DIGEST_LENGTH] = { - 0x8e,0x95,0x9b,0x75,0xda,0xe3,0x13,0xda, - 0x8c,0xf4,0xf7,0x28,0x14,0xfc,0x14,0x3f, - 0x8f,0x77,0x79,0xc6,0xeb,0x9f,0x7f,0xa1, - 0x72,0x99,0xae,0xad,0xb6,0x88,0x90,0x18, - 0x50,0x1d,0x28,0x9e,0x49,0x00,0xf7,0xe4, - 0x33,0x1b,0x99,0xde,0xc4,0xb5,0x43,0x3a, - 0xc7,0xd3,0x29,0xee,0xb6,0xdd,0x26,0x54, - 0x5e,0x96,0xe5,0x5b,0x87,0x4b,0xe9,0x09 }; - -unsigned char app_c3[SHA512_DIGEST_LENGTH] = { - 0xe7,0x18,0x48,0x3d,0x0c,0xe7,0x69,0x64, - 0x4e,0x2e,0x42,0xc7,0xbc,0x15,0xb4,0x63, - 0x8e,0x1f,0x98,0xb1,0x3b,0x20,0x44,0x28, - 0x56,0x32,0xa8,0x03,0xaf,0xa9,0x73,0xeb, - 0xde,0x0f,0xf2,0x44,0x87,0x7e,0xa6,0x0a, - 0x4c,0xb0,0x43,0x2c,0xe5,0x77,0xc3,0x1b, - 0xeb,0x00,0x9c,0x5c,0x2c,0x49,0xaa,0x2e, - 0x4e,0xad,0xb2,0x17,0xad,0x8c,0xc0,0x9b }; - -unsigned char app_d1[SHA384_DIGEST_LENGTH] = { - 0xcb,0x00,0x75,0x3f,0x45,0xa3,0x5e,0x8b, - 0xb5,0xa0,0x3d,0x69,0x9a,0xc6,0x50,0x07, - 0x27,0x2c,0x32,0xab,0x0e,0xde,0xd1,0x63, - 0x1a,0x8b,0x60,0x5a,0x43,0xff,0x5b,0xed, - 0x80,0x86,0x07,0x2b,0xa1,0xe7,0xcc,0x23, - 0x58,0xba,0xec,0xa1,0x34,0xc8,0x25,0xa7 }; - -unsigned char app_d2[SHA384_DIGEST_LENGTH] = { - 0x09,0x33,0x0c,0x33,0xf7,0x11,0x47,0xe8, - 0x3d,0x19,0x2f,0xc7,0x82,0xcd,0x1b,0x47, - 0x53,0x11,0x1b,0x17,0x3b,0x3b,0x05,0xd2, - 0x2f,0xa0,0x80,0x86,0xe3,0xb0,0xf7,0x12, - 0xfc,0xc7,0xc7,0x1a,0x55,0x7e,0x2d,0xb9, - 0x66,0xc3,0xe9,0xfa,0x91,0x74,0x60,0x39 }; - -unsigned char app_d3[SHA384_DIGEST_LENGTH] = { - 0x9d,0x0e,0x18,0x09,0x71,0x64,0x74,0xcb, - 0x08,0x6e,0x83,0x4e,0x31,0x0a,0x4a,0x1c, - 0xed,0x14,0x9e,0x9c,0x00,0xf2,0x48,0x52, - 0x79,0x72,0xce,0xc5,0x70,0x4c,0x2a,0x5b, - 0x07,0xb8,0xb3,0xdc,0x38,0xec,0xc4,0xeb, - 0xae,0x97,0xdd,0xd8,0x7f,0x3d,0x89,0x85 }; - -int main (int argc,char **argv) -{ unsigned char md[SHA512_DIGEST_LENGTH]; - int i; - EVP_MD_CTX evp; - -#ifdef OPENSSL_IA32_SSE2 - /* Alternative to this is to call OpenSSL_add_all_algorithms... - * The below code is retained exclusively for debugging purposes. */ - { char *env; - - if ((env=getenv("OPENSSL_ia32cap"))) - OPENSSL_ia32cap = strtoul (env,NULL,0); - } -#endif - - fprintf(stdout,"Testing SHA-512 "); - - EVP_Digest ("abc",3,md,NULL,EVP_sha512(),NULL); - if (memcmp(md,app_c1,sizeof(app_c1))) - { fflush(stdout); - fprintf(stderr,"\nTEST 1 of 3 failed.\n"); - return 1; - } - else - fprintf(stdout,"."); fflush(stdout); - - EVP_Digest ("abcdefgh""bcdefghi""cdefghij""defghijk" - "efghijkl""fghijklm""ghijklmn""hijklmno" - "ijklmnop""jklmnopq""klmnopqr""lmnopqrs" - "mnopqrst""nopqrstu",112,md,NULL,EVP_sha512(),NULL); - if (memcmp(md,app_c2,sizeof(app_c2))) - { fflush(stdout); - fprintf(stderr,"\nTEST 2 of 3 failed.\n"); - return 1; - } - else - fprintf(stdout,"."); fflush(stdout); - - EVP_MD_CTX_init (&evp); - EVP_DigestInit_ex (&evp,EVP_sha512(),NULL); - for (i=0;i<1000000;i+=288) - EVP_DigestUpdate (&evp, "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa", - (1000000-i)<288?1000000-i:288); - EVP_DigestFinal_ex (&evp,md,NULL); - EVP_MD_CTX_cleanup (&evp); - - if (memcmp(md,app_c3,sizeof(app_c3))) - { fflush(stdout); - fprintf(stderr,"\nTEST 3 of 3 failed.\n"); - return 1; - } - else - fprintf(stdout,"."); fflush(stdout); - - fprintf(stdout," passed.\n"); fflush(stdout); - - fprintf(stdout,"Testing SHA-384 "); - - EVP_Digest ("abc",3,md,NULL,EVP_sha384(),NULL); - if (memcmp(md,app_d1,sizeof(app_d1))) - { fflush(stdout); - fprintf(stderr,"\nTEST 1 of 3 failed.\n"); - return 1; - } - else - fprintf(stdout,"."); fflush(stdout); - - EVP_Digest ("abcdefgh""bcdefghi""cdefghij""defghijk" - "efghijkl""fghijklm""ghijklmn""hijklmno" - "ijklmnop""jklmnopq""klmnopqr""lmnopqrs" - "mnopqrst""nopqrstu",112,md,NULL,EVP_sha384(),NULL); - if (memcmp(md,app_d2,sizeof(app_d2))) - { fflush(stdout); - fprintf(stderr,"\nTEST 2 of 3 failed.\n"); - return 1; - } - else - fprintf(stdout,"."); fflush(stdout); - - EVP_MD_CTX_init (&evp); - EVP_DigestInit_ex (&evp,EVP_sha384(),NULL); - for (i=0;i<1000000;i+=64) - EVP_DigestUpdate (&evp, "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa" - "aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa", - (1000000-i)<64?1000000-i:64); - EVP_DigestFinal_ex (&evp,md,NULL); - EVP_MD_CTX_cleanup (&evp); - - if (memcmp(md,app_d3,sizeof(app_d3))) - { fflush(stdout); - fprintf(stderr,"\nTEST 3 of 3 failed.\n"); - return 1; - } - else - fprintf(stdout,"."); fflush(stdout); - - fprintf(stdout," passed.\n"); fflush(stdout); - - return 0; -} -#endif diff --git a/app/openssl/crypto/sha/sha_dgst.c b/app/openssl/crypto/sha/sha_dgst.c deleted file mode 100644 index 70eb5603..00000000 --- a/app/openssl/crypto/sha/sha_dgst.c +++ /dev/null @@ -1,74 +0,0 @@ -/* crypto/sha/sha1dgst.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <openssl/opensslconf.h> -#if !defined(OPENSSL_NO_SHA0) && !defined(OPENSSL_NO_SHA) - -#undef SHA_1 -#define SHA_0 - -#include <openssl/opensslv.h> - -const char SHA_version[]="SHA" OPENSSL_VERSION_PTEXT; - -/* The implementation is in ../md32_common.h */ - -#include "sha_locl.h" - -#endif - diff --git a/app/openssl/crypto/sha/sha_locl.h b/app/openssl/crypto/sha/sha_locl.h deleted file mode 100644 index 672c26ee..00000000 --- a/app/openssl/crypto/sha/sha_locl.h +++ /dev/null @@ -1,437 +0,0 @@ -/* crypto/sha/sha_locl.h */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdlib.h> -#include <string.h> - -#include <openssl/opensslconf.h> -#include <openssl/sha.h> - -#define DATA_ORDER_IS_BIG_ENDIAN - -#define HASH_LONG SHA_LONG -#define HASH_CTX SHA_CTX -#define HASH_CBLOCK SHA_CBLOCK -#define HASH_MAKE_STRING(c,s) do { \ - unsigned long ll; \ - ll=(c)->h0; HOST_l2c(ll,(s)); \ - ll=(c)->h1; HOST_l2c(ll,(s)); \ - ll=(c)->h2; HOST_l2c(ll,(s)); \ - ll=(c)->h3; HOST_l2c(ll,(s)); \ - ll=(c)->h4; HOST_l2c(ll,(s)); \ - } while (0) - -#if defined(SHA_0) - -# define HASH_UPDATE SHA_Update -# define HASH_TRANSFORM SHA_Transform -# define HASH_FINAL SHA_Final -# define HASH_INIT SHA_Init -# define HASH_BLOCK_DATA_ORDER sha_block_data_order -# define Xupdate(a,ix,ia,ib,ic,id) (ix=(a)=(ia^ib^ic^id)) - -static void sha_block_data_order (SHA_CTX *c, const void *p,size_t num); - -#elif defined(SHA_1) - -# define HASH_UPDATE SHA1_Update -# define HASH_TRANSFORM SHA1_Transform -# define HASH_FINAL SHA1_Final -# define HASH_INIT SHA1_Init -# define HASH_BLOCK_DATA_ORDER sha1_block_data_order -# if defined(__MWERKS__) && defined(__MC68K__) - /* Metrowerks for Motorola fails otherwise:-( <appro@fy.chalmers.se> */ -# define Xupdate(a,ix,ia,ib,ic,id) do { (a)=(ia^ib^ic^id); \ - ix=(a)=ROTATE((a),1); \ - } while (0) -# else -# define Xupdate(a,ix,ia,ib,ic,id) ( (a)=(ia^ib^ic^id), \ - ix=(a)=ROTATE((a),1) \ - ) -# endif - -#ifndef SHA1_ASM -static -#endif -void sha1_block_data_order (SHA_CTX *c, const void *p,size_t num); - -#else -# error "Either SHA_0 or SHA_1 must be defined." -#endif - -#include "md32_common.h" - -#define INIT_DATA_h0 0x67452301UL -#define INIT_DATA_h1 0xefcdab89UL -#define INIT_DATA_h2 0x98badcfeUL -#define INIT_DATA_h3 0x10325476UL -#define INIT_DATA_h4 0xc3d2e1f0UL - -int HASH_INIT (SHA_CTX *c) - { - memset (c,0,sizeof(*c)); - c->h0=INIT_DATA_h0; - c->h1=INIT_DATA_h1; - c->h2=INIT_DATA_h2; - c->h3=INIT_DATA_h3; - c->h4=INIT_DATA_h4; - return 1; - } - -#define K_00_19 0x5a827999UL -#define K_20_39 0x6ed9eba1UL -#define K_40_59 0x8f1bbcdcUL -#define K_60_79 0xca62c1d6UL - -/* As pointed out by Wei Dai <weidai@eskimo.com>, F() below can be - * simplified to the code in F_00_19. Wei attributes these optimisations - * to Peter Gutmann's SHS code, and he attributes it to Rich Schroeppel. - * #define F(x,y,z) (((x) & (y)) | ((~(x)) & (z))) - * I've just become aware of another tweak to be made, again from Wei Dai, - * in F_40_59, (x&a)|(y&a) -> (x|y)&a - */ -#define F_00_19(b,c,d) ((((c) ^ (d)) & (b)) ^ (d)) -#define F_20_39(b,c,d) ((b) ^ (c) ^ (d)) -#define F_40_59(b,c,d) (((b) & (c)) | (((b)|(c)) & (d))) -#define F_60_79(b,c,d) F_20_39(b,c,d) - -#ifndef OPENSSL_SMALL_FOOTPRINT - -#define BODY_00_15(i,a,b,c,d,e,f,xi) \ - (f)=xi+(e)+K_00_19+ROTATE((a),5)+F_00_19((b),(c),(d)); \ - (b)=ROTATE((b),30); - -#define BODY_16_19(i,a,b,c,d,e,f,xi,xa,xb,xc,xd) \ - Xupdate(f,xi,xa,xb,xc,xd); \ - (f)+=(e)+K_00_19+ROTATE((a),5)+F_00_19((b),(c),(d)); \ - (b)=ROTATE((b),30); - -#define BODY_20_31(i,a,b,c,d,e,f,xi,xa,xb,xc,xd) \ - Xupdate(f,xi,xa,xb,xc,xd); \ - (f)+=(e)+K_20_39+ROTATE((a),5)+F_20_39((b),(c),(d)); \ - (b)=ROTATE((b),30); - -#define BODY_32_39(i,a,b,c,d,e,f,xa,xb,xc,xd) \ - Xupdate(f,xa,xa,xb,xc,xd); \ - (f)+=(e)+K_20_39+ROTATE((a),5)+F_20_39((b),(c),(d)); \ - (b)=ROTATE((b),30); - -#define BODY_40_59(i,a,b,c,d,e,f,xa,xb,xc,xd) \ - Xupdate(f,xa,xa,xb,xc,xd); \ - (f)+=(e)+K_40_59+ROTATE((a),5)+F_40_59((b),(c),(d)); \ - (b)=ROTATE((b),30); - -#define BODY_60_79(i,a,b,c,d,e,f,xa,xb,xc,xd) \ - Xupdate(f,xa,xa,xb,xc,xd); \ - (f)=xa+(e)+K_60_79+ROTATE((a),5)+F_60_79((b),(c),(d)); \ - (b)=ROTATE((b),30); - -#ifdef X -#undef X -#endif -#ifndef MD32_XARRAY - /* - * Originally X was an array. As it's automatic it's natural - * to expect RISC compiler to accomodate at least part of it in - * the register bank, isn't it? Unfortunately not all compilers - * "find" this expectation reasonable:-( On order to make such - * compilers generate better code I replace X[] with a bunch of - * X0, X1, etc. See the function body below... - * <appro@fy.chalmers.se> - */ -# define X(i) XX##i -#else - /* - * However! Some compilers (most notably HP C) get overwhelmed by - * that many local variables so that we have to have the way to - * fall down to the original behavior. - */ -# define X(i) XX[i] -#endif - -#if !defined(SHA_1) || !defined(SHA1_ASM) -static void HASH_BLOCK_DATA_ORDER (SHA_CTX *c, const void *p, size_t num) - { - const unsigned char *data=p; - register unsigned MD32_REG_T A,B,C,D,E,T,l; -#ifndef MD32_XARRAY - unsigned MD32_REG_T XX0, XX1, XX2, XX3, XX4, XX5, XX6, XX7, - XX8, XX9,XX10,XX11,XX12,XX13,XX14,XX15; -#else - SHA_LONG XX[16]; -#endif - - A=c->h0; - B=c->h1; - C=c->h2; - D=c->h3; - E=c->h4; - - for (;;) - { - const union { long one; char little; } is_endian = {1}; - - if (!is_endian.little && sizeof(SHA_LONG)==4 && ((size_t)p%4)==0) - { - const SHA_LONG *W=(const SHA_LONG *)data; - - X( 0) = W[0]; X( 1) = W[ 1]; - BODY_00_15( 0,A,B,C,D,E,T,X( 0)); X( 2) = W[ 2]; - BODY_00_15( 1,T,A,B,C,D,E,X( 1)); X( 3) = W[ 3]; - BODY_00_15( 2,E,T,A,B,C,D,X( 2)); X( 4) = W[ 4]; - BODY_00_15( 3,D,E,T,A,B,C,X( 3)); X( 5) = W[ 5]; - BODY_00_15( 4,C,D,E,T,A,B,X( 4)); X( 6) = W[ 6]; - BODY_00_15( 5,B,C,D,E,T,A,X( 5)); X( 7) = W[ 7]; - BODY_00_15( 6,A,B,C,D,E,T,X( 6)); X( 8) = W[ 8]; - BODY_00_15( 7,T,A,B,C,D,E,X( 7)); X( 9) = W[ 9]; - BODY_00_15( 8,E,T,A,B,C,D,X( 8)); X(10) = W[10]; - BODY_00_15( 9,D,E,T,A,B,C,X( 9)); X(11) = W[11]; - BODY_00_15(10,C,D,E,T,A,B,X(10)); X(12) = W[12]; - BODY_00_15(11,B,C,D,E,T,A,X(11)); X(13) = W[13]; - BODY_00_15(12,A,B,C,D,E,T,X(12)); X(14) = W[14]; - BODY_00_15(13,T,A,B,C,D,E,X(13)); X(15) = W[15]; - BODY_00_15(14,E,T,A,B,C,D,X(14)); - BODY_00_15(15,D,E,T,A,B,C,X(15)); - - data += SHA_CBLOCK; - } - else - { - HOST_c2l(data,l); X( 0)=l; HOST_c2l(data,l); X( 1)=l; - BODY_00_15( 0,A,B,C,D,E,T,X( 0)); HOST_c2l(data,l); X( 2)=l; - BODY_00_15( 1,T,A,B,C,D,E,X( 1)); HOST_c2l(data,l); X( 3)=l; - BODY_00_15( 2,E,T,A,B,C,D,X( 2)); HOST_c2l(data,l); X( 4)=l; - BODY_00_15( 3,D,E,T,A,B,C,X( 3)); HOST_c2l(data,l); X( 5)=l; - BODY_00_15( 4,C,D,E,T,A,B,X( 4)); HOST_c2l(data,l); X( 6)=l; - BODY_00_15( 5,B,C,D,E,T,A,X( 5)); HOST_c2l(data,l); X( 7)=l; - BODY_00_15( 6,A,B,C,D,E,T,X( 6)); HOST_c2l(data,l); X( 8)=l; - BODY_00_15( 7,T,A,B,C,D,E,X( 7)); HOST_c2l(data,l); X( 9)=l; - BODY_00_15( 8,E,T,A,B,C,D,X( 8)); HOST_c2l(data,l); X(10)=l; - BODY_00_15( 9,D,E,T,A,B,C,X( 9)); HOST_c2l(data,l); X(11)=l; - BODY_00_15(10,C,D,E,T,A,B,X(10)); HOST_c2l(data,l); X(12)=l; - BODY_00_15(11,B,C,D,E,T,A,X(11)); HOST_c2l(data,l); X(13)=l; - BODY_00_15(12,A,B,C,D,E,T,X(12)); HOST_c2l(data,l); X(14)=l; - BODY_00_15(13,T,A,B,C,D,E,X(13)); HOST_c2l(data,l); X(15)=l; - BODY_00_15(14,E,T,A,B,C,D,X(14)); - BODY_00_15(15,D,E,T,A,B,C,X(15)); - } - - BODY_16_19(16,C,D,E,T,A,B,X( 0),X( 0),X( 2),X( 8),X(13)); - BODY_16_19(17,B,C,D,E,T,A,X( 1),X( 1),X( 3),X( 9),X(14)); - BODY_16_19(18,A,B,C,D,E,T,X( 2),X( 2),X( 4),X(10),X(15)); - BODY_16_19(19,T,A,B,C,D,E,X( 3),X( 3),X( 5),X(11),X( 0)); - - BODY_20_31(20,E,T,A,B,C,D,X( 4),X( 4),X( 6),X(12),X( 1)); - BODY_20_31(21,D,E,T,A,B,C,X( 5),X( 5),X( 7),X(13),X( 2)); - BODY_20_31(22,C,D,E,T,A,B,X( 6),X( 6),X( 8),X(14),X( 3)); - BODY_20_31(23,B,C,D,E,T,A,X( 7),X( 7),X( 9),X(15),X( 4)); - BODY_20_31(24,A,B,C,D,E,T,X( 8),X( 8),X(10),X( 0),X( 5)); - BODY_20_31(25,T,A,B,C,D,E,X( 9),X( 9),X(11),X( 1),X( 6)); - BODY_20_31(26,E,T,A,B,C,D,X(10),X(10),X(12),X( 2),X( 7)); - BODY_20_31(27,D,E,T,A,B,C,X(11),X(11),X(13),X( 3),X( 8)); - BODY_20_31(28,C,D,E,T,A,B,X(12),X(12),X(14),X( 4),X( 9)); - BODY_20_31(29,B,C,D,E,T,A,X(13),X(13),X(15),X( 5),X(10)); - BODY_20_31(30,A,B,C,D,E,T,X(14),X(14),X( 0),X( 6),X(11)); - BODY_20_31(31,T,A,B,C,D,E,X(15),X(15),X( 1),X( 7),X(12)); - - BODY_32_39(32,E,T,A,B,C,D,X( 0),X( 2),X( 8),X(13)); - BODY_32_39(33,D,E,T,A,B,C,X( 1),X( 3),X( 9),X(14)); - BODY_32_39(34,C,D,E,T,A,B,X( 2),X( 4),X(10),X(15)); - BODY_32_39(35,B,C,D,E,T,A,X( 3),X( 5),X(11),X( 0)); - BODY_32_39(36,A,B,C,D,E,T,X( 4),X( 6),X(12),X( 1)); - BODY_32_39(37,T,A,B,C,D,E,X( 5),X( 7),X(13),X( 2)); - BODY_32_39(38,E,T,A,B,C,D,X( 6),X( 8),X(14),X( 3)); - BODY_32_39(39,D,E,T,A,B,C,X( 7),X( 9),X(15),X( 4)); - - BODY_40_59(40,C,D,E,T,A,B,X( 8),X(10),X( 0),X( 5)); - BODY_40_59(41,B,C,D,E,T,A,X( 9),X(11),X( 1),X( 6)); - BODY_40_59(42,A,B,C,D,E,T,X(10),X(12),X( 2),X( 7)); - BODY_40_59(43,T,A,B,C,D,E,X(11),X(13),X( 3),X( 8)); - BODY_40_59(44,E,T,A,B,C,D,X(12),X(14),X( 4),X( 9)); - BODY_40_59(45,D,E,T,A,B,C,X(13),X(15),X( 5),X(10)); - BODY_40_59(46,C,D,E,T,A,B,X(14),X( 0),X( 6),X(11)); - BODY_40_59(47,B,C,D,E,T,A,X(15),X( 1),X( 7),X(12)); - BODY_40_59(48,A,B,C,D,E,T,X( 0),X( 2),X( 8),X(13)); - BODY_40_59(49,T,A,B,C,D,E,X( 1),X( 3),X( 9),X(14)); - BODY_40_59(50,E,T,A,B,C,D,X( 2),X( 4),X(10),X(15)); - BODY_40_59(51,D,E,T,A,B,C,X( 3),X( 5),X(11),X( 0)); - BODY_40_59(52,C,D,E,T,A,B,X( 4),X( 6),X(12),X( 1)); - BODY_40_59(53,B,C,D,E,T,A,X( 5),X( 7),X(13),X( 2)); - BODY_40_59(54,A,B,C,D,E,T,X( 6),X( 8),X(14),X( 3)); - BODY_40_59(55,T,A,B,C,D,E,X( 7),X( 9),X(15),X( 4)); - BODY_40_59(56,E,T,A,B,C,D,X( 8),X(10),X( 0),X( 5)); - BODY_40_59(57,D,E,T,A,B,C,X( 9),X(11),X( 1),X( 6)); - BODY_40_59(58,C,D,E,T,A,B,X(10),X(12),X( 2),X( 7)); - BODY_40_59(59,B,C,D,E,T,A,X(11),X(13),X( 3),X( 8)); - - BODY_60_79(60,A,B,C,D,E,T,X(12),X(14),X( 4),X( 9)); - BODY_60_79(61,T,A,B,C,D,E,X(13),X(15),X( 5),X(10)); - BODY_60_79(62,E,T,A,B,C,D,X(14),X( 0),X( 6),X(11)); - BODY_60_79(63,D,E,T,A,B,C,X(15),X( 1),X( 7),X(12)); - BODY_60_79(64,C,D,E,T,A,B,X( 0),X( 2),X( 8),X(13)); - BODY_60_79(65,B,C,D,E,T,A,X( 1),X( 3),X( 9),X(14)); - BODY_60_79(66,A,B,C,D,E,T,X( 2),X( 4),X(10),X(15)); - BODY_60_79(67,T,A,B,C,D,E,X( 3),X( 5),X(11),X( 0)); - BODY_60_79(68,E,T,A,B,C,D,X( 4),X( 6),X(12),X( 1)); - BODY_60_79(69,D,E,T,A,B,C,X( 5),X( 7),X(13),X( 2)); - BODY_60_79(70,C,D,E,T,A,B,X( 6),X( 8),X(14),X( 3)); - BODY_60_79(71,B,C,D,E,T,A,X( 7),X( 9),X(15),X( 4)); - BODY_60_79(72,A,B,C,D,E,T,X( 8),X(10),X( 0),X( 5)); - BODY_60_79(73,T,A,B,C,D,E,X( 9),X(11),X( 1),X( 6)); - BODY_60_79(74,E,T,A,B,C,D,X(10),X(12),X( 2),X( 7)); - BODY_60_79(75,D,E,T,A,B,C,X(11),X(13),X( 3),X( 8)); - BODY_60_79(76,C,D,E,T,A,B,X(12),X(14),X( 4),X( 9)); - BODY_60_79(77,B,C,D,E,T,A,X(13),X(15),X( 5),X(10)); - BODY_60_79(78,A,B,C,D,E,T,X(14),X( 0),X( 6),X(11)); - BODY_60_79(79,T,A,B,C,D,E,X(15),X( 1),X( 7),X(12)); - - c->h0=(c->h0+E)&0xffffffffL; - c->h1=(c->h1+T)&0xffffffffL; - c->h2=(c->h2+A)&0xffffffffL; - c->h3=(c->h3+B)&0xffffffffL; - c->h4=(c->h4+C)&0xffffffffL; - - if (--num == 0) break; - - A=c->h0; - B=c->h1; - C=c->h2; - D=c->h3; - E=c->h4; - - } - } -#endif - -#else /* OPENSSL_SMALL_FOOTPRINT */ - -#define BODY_00_15(xi) do { \ - T=E+K_00_19+F_00_19(B,C,D); \ - E=D, D=C, C=ROTATE(B,30), B=A; \ - A=ROTATE(A,5)+T+xi; } while(0) - -#define BODY_16_19(xa,xb,xc,xd) do { \ - Xupdate(T,xa,xa,xb,xc,xd); \ - T+=E+K_00_19+F_00_19(B,C,D); \ - E=D, D=C, C=ROTATE(B,30), B=A; \ - A=ROTATE(A,5)+T; } while(0) - -#define BODY_20_39(xa,xb,xc,xd) do { \ - Xupdate(T,xa,xa,xb,xc,xd); \ - T+=E+K_20_39+F_20_39(B,C,D); \ - E=D, D=C, C=ROTATE(B,30), B=A; \ - A=ROTATE(A,5)+T; } while(0) - -#define BODY_40_59(xa,xb,xc,xd) do { \ - Xupdate(T,xa,xa,xb,xc,xd); \ - T+=E+K_40_59+F_40_59(B,C,D); \ - E=D, D=C, C=ROTATE(B,30), B=A; \ - A=ROTATE(A,5)+T; } while(0) - -#define BODY_60_79(xa,xb,xc,xd) do { \ - Xupdate(T,xa,xa,xb,xc,xd); \ - T=E+K_60_79+F_60_79(B,C,D); \ - E=D, D=C, C=ROTATE(B,30), B=A; \ - A=ROTATE(A,5)+T+xa; } while(0) - -#if !defined(SHA_1) || !defined(SHA1_ASM) -static void HASH_BLOCK_DATA_ORDER (SHA_CTX *c, const void *p, size_t num) - { - const unsigned char *data=p; - register unsigned MD32_REG_T A,B,C,D,E,T,l; - int i; - SHA_LONG X[16]; - - A=c->h0; - B=c->h1; - C=c->h2; - D=c->h3; - E=c->h4; - - for (;;) - { - for (i=0;i<16;i++) - { HOST_c2l(data,l); X[i]=l; BODY_00_15(X[i]); } - for (i=0;i<4;i++) - { BODY_16_19(X[i], X[i+2], X[i+8], X[(i+13)&15]); } - for (;i<24;i++) - { BODY_20_39(X[i&15], X[(i+2)&15], X[(i+8)&15],X[(i+13)&15]); } - for (i=0;i<20;i++) - { BODY_40_59(X[(i+8)&15],X[(i+10)&15],X[i&15], X[(i+5)&15]); } - for (i=4;i<24;i++) - { BODY_60_79(X[(i+8)&15],X[(i+10)&15],X[i&15], X[(i+5)&15]); } - - c->h0=(c->h0+A)&0xffffffffL; - c->h1=(c->h1+B)&0xffffffffL; - c->h2=(c->h2+C)&0xffffffffL; - c->h3=(c->h3+D)&0xffffffffL; - c->h4=(c->h4+E)&0xffffffffL; - - if (--num == 0) break; - - A=c->h0; - B=c->h1; - C=c->h2; - D=c->h3; - E=c->h4; - - } - } -#endif - -#endif diff --git a/app/openssl/crypto/sha/shatest.c b/app/openssl/crypto/sha/shatest.c deleted file mode 100644 index 27614646..00000000 --- a/app/openssl/crypto/sha/shatest.c +++ /dev/null @@ -1,178 +0,0 @@ -/* crypto/sha/shatest.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include <string.h> -#include <stdlib.h> - -#include "../e_os.h" - -#if defined(OPENSSL_NO_SHA) || defined(OPENSSL_NO_SHA0) -int main(int argc, char *argv[]) -{ - printf("No SHA0 support\n"); - return(0); -} -#else -#include <openssl/evp.h> -#include <openssl/sha.h> - -#ifdef CHARSET_EBCDIC -#include <openssl/ebcdic.h> -#endif - -#define SHA_0 /* FIPS 180 */ -#undef SHA_1 /* FIPS 180-1 */ - -static char *test[]={ - "abc", - "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq", - NULL, - }; - -#ifdef SHA_0 -static char *ret[]={ - "0164b8a914cd2a5e74c4f7ff082c4d97f1edf880", - "d2516ee1acfa5baf33dfc1c471e438449ef134c8", - }; -static char *bigret= - "3232affa48628a26653b5aaa44541fd90d690603"; -#endif -#ifdef SHA_1 -static char *ret[]={ - "a9993e364706816aba3e25717850c26c9cd0d89d", - "84983e441c3bd26ebaae4aa1f95129e5e54670f1", - }; -static char *bigret= - "34aa973cd4c4daa4f61eeb2bdbad27316534016f"; -#endif - -static char *pt(unsigned char *md); -int main(int argc, char *argv[]) - { - int i,err=0; - char **P,**R; - static unsigned char buf[1000]; - char *p,*r; - EVP_MD_CTX c; - unsigned char md[SHA_DIGEST_LENGTH]; - -#ifdef CHARSET_EBCDIC - ebcdic2ascii(test[0], test[0], strlen(test[0])); - ebcdic2ascii(test[1], test[1], strlen(test[1])); -#endif - - EVP_MD_CTX_init(&c); - P=test; - R=ret; - i=1; - while (*P != NULL) - { - EVP_Digest(*P,strlen(*P),md,NULL,EVP_sha(), NULL); - p=pt(md); - if (strcmp(p,*R) != 0) - { - printf("error calculating SHA on '%s'\n",*P); - printf("got %s instead of %s\n",p,*R); - err++; - } - else - printf("test %d ok\n",i); - i++; - R++; - P++; - } - - memset(buf,'a',1000); -#ifdef CHARSET_EBCDIC - ebcdic2ascii(buf, buf, 1000); -#endif /*CHARSET_EBCDIC*/ - EVP_DigestInit_ex(&c,EVP_sha(), NULL); - for (i=0; i<1000; i++) - EVP_DigestUpdate(&c,buf,1000); - EVP_DigestFinal_ex(&c,md,NULL); - p=pt(md); - - r=bigret; - if (strcmp(p,r) != 0) - { - printf("error calculating SHA on '%s'\n",p); - printf("got %s instead of %s\n",p,r); - err++; - } - else - printf("test 3 ok\n"); - -#ifdef OPENSSL_SYS_NETWARE - if (err) printf("ERROR: %d\n", err); -#endif - EVP_MD_CTX_cleanup(&c); - EXIT(err); - return(0); - } - -static char *pt(unsigned char *md) - { - int i; - static char buf[80]; - - for (i=0; i<SHA_DIGEST_LENGTH; i++) - sprintf(&(buf[i*2]),"%02x",md[i]); - return(buf); - } -#endif |