1 files changed, 0 insertions, 594 deletions
diff --git a/app/openssl/crypto/sha/asm/sha512-sparcv9.pl b/app/openssl/crypto/sha/asm/sha512-sparcv9.pl
deleted file mode 100644
index ec5d7813..00000000
--- a/app/openssl/crypto/sha/asm/sha512-sparcv9.pl
+++ /dev/null
@@ -1,594 +0,0 @@
-#!/usr/bin/env perl
-
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# SHA256 performance improvement over compiler generated code varies
-# from 40% for Sun C [32-bit build] to 70% for gcc [3.3, 64-bit
-# build]. Just like in SHA1 module I aim to ensure scalability on
-# UltraSPARC T1 by packing X[16] to 8 64-bit registers.
-
-# SHA512 on pre-T1 UltraSPARC.
-#
-# Performance is >75% better than 64-bit code generated by Sun C and
-# over 2x than 32-bit code. X[16] resides on stack, but access to it
-# is scheduled for L2 latency and staged through 32 least significant
-# bits of %l0-%l7. The latter is done to achieve 32-/64-bit ABI
-# duality. Nevetheless it's ~40% faster than SHA256, which is pretty
-# good [optimal coefficient is 50%].
-#
-# SHA512 on UltraSPARC T1.
-#
-# It's not any faster than 64-bit code generated by Sun C 5.8. This is
-# because 64-bit code generator has the advantage of using 64-bit
-# loads(*) to access X[16], which I consciously traded for 32-/64-bit
-# ABI duality [as per above]. But it surpasses 32-bit Sun C generated
-# code by 60%, not to mention that it doesn't suffer from severe decay
-# when running 4 times physical cores threads and that it leaves gcc
-# [3.4] behind by over 4x factor! If compared to SHA256, single thread
-# performance is only 10% better, but overall throughput for maximum
-# amount of threads for given CPU exceeds corresponding one of SHA256
-# by 30% [again, optimal coefficient is 50%].
-#
-# (*)	Unlike pre-T1 UltraSPARC loads on T1 are executed strictly
-#	in-order, i.e. load instruction has to complete prior next
-#	instruction in given thread is executed, even if the latter is
-#	not dependent on load result! This means that on T1 two 32-bit
-#	loads are always slower than one 64-bit load. Once again this
-#	is unlike pre-T1 UltraSPARC, where, if scheduled appropriately,
-#	2x32-bit loads can be as fast as 1x64-bit ones.
-
-$bits=32;
-for (@ARGV)	{ $bits=64 if (/\-m64/ || /\-xarch\=v9/); }
-if ($bits==64)	{ $bias=2047; $frame=192; }
-else		{ $bias=0;    $frame=112; }
-
-$output=shift;
-open STDOUT,">$output";
-
-if ($output =~ /512/) {
-	$label="512";
-	$SZ=8;
-	$LD="ldx";		# load from memory
-	$ST="stx";		# store to memory
-	$SLL="sllx";		# shift left logical
-	$SRL="srlx";		# shift right logical
-	@Sigma0=(28,34,39);
-	@Sigma1=(14,18,41);
-	@sigma0=( 7, 1, 8);	# right shift first
-	@sigma1=( 6,19,61);	# right shift first
-	$lastK=0x817;
-	$rounds=80;
-	$align=4;
-
-	$locals=16*$SZ;		# X[16]
-
-	$A="%o0";
-	$B="%o1";
-	$C="%o2";
-	$D="%o3";
-	$E="%o4";
-	$F="%o5";
-	$G="%g1";
-	$H="%o7";
-	@V=($A,$B,$C,$D,$E,$F,$G,$H);
-} else {
-	$label="256";
-	$SZ=4;
-	$LD="ld";		# load from memory
-	$ST="st";		# store to memory
-	$SLL="sll";		# shift left logical
-	$SRL="srl";		# shift right logical
-	@Sigma0=( 2,13,22);
-	@Sigma1=( 6,11,25);
-	@sigma0=( 3, 7,18);	# right shift first
-	@sigma1=(10,17,19);	# right shift first
-	$lastK=0x8f2;
-	$rounds=64;
-	$align=8;
-
-	$locals=0;		# X[16] is register resident
-	@X=("%o0","%o1","%o2","%o3","%o4","%o5","%g1","%o7");
-	
-	$A="%l0";
-	$B="%l1";
-	$C="%l2";
-	$D="%l3";
-	$E="%l4";
-	$F="%l5";
-	$G="%l6";
-	$H="%l7";
-	@V=($A,$B,$C,$D,$E,$F,$G,$H);
-}
-$T1="%g2";
-$tmp0="%g3";
-$tmp1="%g4";
-$tmp2="%g5";
-
-$ctx="%i0";
-$inp="%i1";
-$len="%i2";
-$Ktbl="%i3";
-$tmp31="%i4";
-$tmp32="%i5";
-
-########### SHA256
-$Xload = sub {
-my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
-
-    if ($i==0) {
-$code.=<<___;
-	ldx	[$inp+0],@X[0]
-	ldx	[$inp+16],@X[2]
-	ldx	[$inp+32],@X[4]
-	ldx	[$inp+48],@X[6]
-	ldx	[$inp+8],@X[1]
-	ldx	[$inp+24],@X[3]
-	subcc	%g0,$tmp31,$tmp32 ! should be 64-$tmp31, but -$tmp31 works too
-	ldx	[$inp+40],@X[5]
-	bz,pt	%icc,.Laligned
-	ldx	[$inp+56],@X[7]
-
-	sllx	@X[0],$tmp31,@X[0]
-	ldx	[$inp+64],$T1
-___
-for($j=0;$j<7;$j++)
-{   $code.=<<___;
-	srlx	@X[$j+1],$tmp32,$tmp1
-	sllx	@X[$j+1],$tmp31,@X[$j+1]
-	or	$tmp1,@X[$j],@X[$j]
-___
-}
-$code.=<<___;
-	srlx	$T1,$tmp32,$T1
-	or	$T1,@X[7],@X[7]
-.Laligned:
-___
-    }
-
-    if ($i&1) {
-	$code.="\tadd	@X[$i/2],$h,$T1\n";
-    } else {
-	$code.="\tsrlx	@X[$i/2],32,$T1\n\tadd	$h,$T1,$T1\n";
-    }
-} if ($SZ==4);
-
-########### SHA512
-$Xload = sub {
-my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
-my @pair=("%l".eval(($i*2)%8),"%l".eval(($i*2)%8+1),"%l".eval((($i+1)*2)%8));
-
-$code.=<<___ if ($i==0);
-	ld	[$inp+0],%l0
-	ld	[$inp+4],%l1
-	ld	[$inp+8],%l2
-	ld	[$inp+12],%l3
-	ld	[$inp+16],%l4
-	ld	[$inp+20],%l5
-	ld	[$inp+24],%l6
-	ld	[$inp+28],%l7
-___
-$code.=<<___ if ($i<15);
-	sllx	@pair[1],$tmp31,$tmp2	! Xload($i)
-	add	$tmp31,32,$tmp0
-	sllx	@pair[0],$tmp0,$tmp1
-	`"ld	[$inp+".eval(32+0+$i*8)."],@pair[0]"	if ($i<12)`
-	srlx	@pair[2],$tmp32,@pair[1]
-	or	$tmp1,$tmp2,$tmp2
-	or	@pair[1],$tmp2,$tmp2
-	`"ld	[$inp+".eval(32+4+$i*8)."],@pair[1]"	if ($i<12)`
-	add	$h,$tmp2,$T1
-	$ST	$tmp2,[%sp+`$bias+$frame+$i*$SZ`]
-___
-$code.=<<___ if ($i==12);
-	brnz,a	$tmp31,.+8
-	ld	[$inp+128],%l0
-___
-$code.=<<___ if ($i==15);
-	ld	[%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+0`],%l2
-	sllx	@pair[1],$tmp31,$tmp2	! Xload($i)
-	add	$tmp31,32,$tmp0
-	ld	[%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+4`],%l3
-	sllx	@pair[0],$tmp0,$tmp1
-	ld	[%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+0`],%l4
-	srlx	@pair[2],$tmp32,@pair[1]
-	or	$tmp1,$tmp2,$tmp2
-	ld	[%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+4`],%l5
-	or	@pair[1],$tmp2,$tmp2
-	ld	[%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+0`],%l6
-	add	$h,$tmp2,$T1
-	$ST	$tmp2,[%sp+`$bias+$frame+$i*$SZ`]
-	ld	[%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+4`],%l7
-	ld	[%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+0`],%l0
-	ld	[%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+4`],%l1
-___
-} if ($SZ==8);
-
-########### common
-sub BODY_00_15 {
-my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
-
-    if ($i<16) {
-	&$Xload(@_);
-    } else {
-	$code.="\tadd	$h,$T1,$T1\n";
-    }
-
-$code.=<<___;
-	$SRL	$e,@Sigma1[0],$h	!! $i
-	xor	$f,$g,$tmp2
-	$SLL	$e,`$SZ*8-@Sigma1[2]`,$tmp1
-	and	$e,$tmp2,$tmp2
-	$SRL	$e,@Sigma1[1],$tmp0
-	xor	$tmp1,$h,$h
-	$SLL	$e,`$SZ*8-@Sigma1[1]`,$tmp1
-	xor	$tmp0,$h,$h
-	$SRL	$e,@Sigma1[2],$tmp0
-	xor	$tmp1,$h,$h
-	$SLL	$e,`$SZ*8-@Sigma1[0]`,$tmp1
-	xor	$tmp0,$h,$h
-	xor	$g,$tmp2,$tmp2		! Ch(e,f,g)
-	xor	$tmp1,$h,$tmp0		! Sigma1(e)
-
-	$SRL	$a,@Sigma0[0],$h
-	add	$tmp2,$T1,$T1
-	$LD	[$Ktbl+`$i*$SZ`],$tmp2	! K[$i]
-	$SLL	$a,`$SZ*8-@Sigma0[2]`,$tmp1
-	add	$tmp0,$T1,$T1
-	$SRL	$a,@Sigma0[1],$tmp0
-	xor	$tmp1,$h,$h
-	$SLL	$a,`$SZ*8-@Sigma0[1]`,$tmp1
-	xor	$tmp0,$h,$h
-	$SRL	$a,@Sigma0[2],$tmp0
-	xor	$tmp1,$h,$h	
-	$SLL	$a,`$SZ*8-@Sigma0[0]`,$tmp1
-	xor	$tmp0,$h,$h
-	xor	$tmp1,$h,$h		! Sigma0(a)
-
-	or	$a,$b,$tmp0
-	and	$a,$b,$tmp1
-	and	$c,$tmp0,$tmp0
-	or	$tmp0,$tmp1,$tmp1	! Maj(a,b,c)
-	add	$tmp2,$T1,$T1		! +=K[$i]
-	add	$tmp1,$h,$h
-
-	add	$T1,$d,$d
-	add	$T1,$h,$h
-___
-}
-
-########### SHA256
-$BODY_16_XX = sub {
-my $i=@_[0];
-my $xi;
-
-    if ($i&1) {
-	$xi=$tmp32;
-	$code.="\tsrlx	@X[(($i+1)/2)%8],32,$xi\n";
-    } else {
-	$xi=@X[(($i+1)/2)%8];
-    }
-$code.=<<___;
-	srl	$xi,@sigma0[0],$T1		!! Xupdate($i)
-	sll	$xi,`32-@sigma0[2]`,$tmp1
-	srl	$xi,@sigma0[1],$tmp0
-	xor	$tmp1,$T1,$T1
-	sll	$tmp1,`@sigma0[2]-@sigma0[1]`,$tmp1
-	xor	$tmp0,$T1,$T1
-	srl	$xi,@sigma0[2],$tmp0
-	xor	$tmp1,$T1,$T1
-___
-    if ($i&1) {
-	$xi=@X[(($i+14)/2)%8];
-    } else {
-	$xi=$tmp32;
-	$code.="\tsrlx	@X[(($i+14)/2)%8],32,$xi\n";
-    }
-$code.=<<___;
-	srl	$xi,@sigma1[0],$tmp2
-	xor	$tmp0,$T1,$T1			! T1=sigma0(X[i+1])
-	sll	$xi,`32-@sigma1[2]`,$tmp1
-	srl	$xi,@sigma1[1],$tmp0
-	xor	$tmp1,$tmp2,$tmp2
-	sll	$tmp1,`@sigma1[2]-@sigma1[1]`,$tmp1
-	xor	$tmp0,$tmp2,$tmp2
-	srl	$xi,@sigma1[2],$tmp0
-	xor	$tmp1,$tmp2,$tmp2
-___
-    if ($i&1) {
-	$xi=@X[($i/2)%8];
-$code.=<<___;
-	srlx	@X[(($i+9)/2)%8],32,$tmp1	! X[i+9]
-	xor	$tmp0,$tmp2,$tmp2		! sigma1(X[i+14])
-	srl	@X[($i/2)%8],0,$tmp0
-	add	$xi,$T1,$T1			! +=X[i]
-	xor	$tmp0,@X[($i/2)%8],@X[($i/2)%8]
-	add	$tmp2,$T1,$T1
-	add	$tmp1,$T1,$T1
-
-	srl	$T1,0,$T1
-	or	$T1,@X[($i/2)%8],@X[($i/2)%8]
-___
-    } else {
-	$xi=@X[(($i+9)/2)%8];
-$code.=<<___;
-	srlx	@X[($i/2)%8],32,$tmp1		! X[i]
-	xor	$tmp0,$tmp2,$tmp2		! sigma1(X[i+14])
-	srl	@X[($i/2)%8],0,@X[($i/2)%8]
-	add	$xi,$T1,$T1			! +=X[i+9]
-	add	$tmp2,$T1,$T1
-	add	$tmp1,$T1,$T1
-
-	sllx	$T1,32,$tmp0
-	or	$tmp0,@X[($i/2)%8],@X[($i/2)%8]
-___
-    }
-    &BODY_00_15(@_);
-} if ($SZ==4);
-
-########### SHA512
-$BODY_16_XX = sub {
-my $i=@_[0];
-my @pair=("%l".eval(($i*2)%8),"%l".eval(($i*2)%8+1));
-
-$code.=<<___;
-	sllx	%l2,32,$tmp0		!! Xupdate($i)
-	or	%l3,$tmp0,$tmp0
-
-	srlx	$tmp0,@sigma0[0],$T1
-	ld	[%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+0`],%l2
-	sllx	$tmp0,`64-@sigma0[2]`,$tmp1
-	ld	[%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+4`],%l3
-	srlx	$tmp0,@sigma0[1],$tmp0
-	xor	$tmp1,$T1,$T1
-	sllx	$tmp1,`@sigma0[2]-@sigma0[1]`,$tmp1
-	xor	$tmp0,$T1,$T1
-	srlx	$tmp0,`@sigma0[2]-@sigma0[1]`,$tmp0
-	xor	$tmp1,$T1,$T1
-	sllx	%l6,32,$tmp2
-	xor	$tmp0,$T1,$T1		! sigma0(X[$i+1])
-	or	%l7,$tmp2,$tmp2
-
-	srlx	$tmp2,@sigma1[0],$tmp1
-	ld	[%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+0`],%l6
-	sllx	$tmp2,`64-@sigma1[2]`,$tmp0
-	ld	[%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+4`],%l7
-	srlx	$tmp2,@sigma1[1],$tmp2
-	xor	$tmp0,$tmp1,$tmp1
-	sllx	$tmp0,`@sigma1[2]-@sigma1[1]`,$tmp0
-	xor	$tmp2,$tmp1,$tmp1
-	srlx	$tmp2,`@sigma1[2]-@sigma1[1]`,$tmp2
-	xor	$tmp0,$tmp1,$tmp1
-	sllx	%l4,32,$tmp0
-	xor	$tmp2,$tmp1,$tmp1	! sigma1(X[$i+14])
-	ld	[%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+0`],%l4
-	or	%l5,$tmp0,$tmp0
-	ld	[%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+4`],%l5
-
-	sllx	%l0,32,$tmp2
-	add	$tmp1,$T1,$T1
-	ld	[%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+0`],%l0
-	or	%l1,$tmp2,$tmp2
-	add	$tmp0,$T1,$T1		! +=X[$i+9]
-	ld	[%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+4`],%l1
-	add	$tmp2,$T1,$T1		! +=X[$i]
-	$ST	$T1,[%sp+`$bias+$frame+($i%16)*$SZ`]
-___
-    &BODY_00_15(@_);
-} if ($SZ==8);
-
-$code.=<<___ if ($bits==64);
-.register	%g2,#scratch
-.register	%g3,#scratch
-___
-$code.=<<___;
-.section	".text",#alloc,#execinstr
-
-.align	64
-K${label}:
-.type	K${label},#object
-___
-if ($SZ==4) {
-$code.=<<___;
-	.long	0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5
-	.long	0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5
-	.long	0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3
-	.long	0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174
-	.long	0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc
-	.long	0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da
-	.long	0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7
-	.long	0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967
-	.long	0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13
-	.long	0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85
-	.long	0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3
-	.long	0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070
-	.long	0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5
-	.long	0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3
-	.long	0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208
-	.long	0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
-___
-} else {
-$code.=<<___;
-	.long	0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd
-	.long	0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc
-	.long	0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019
-	.long	0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118
-	.long	0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe
-	.long	0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2
-	.long	0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1
-	.long	0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694
-	.long	0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3
-	.long	0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65
-	.long	0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483
-	.long	0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5
-	.long	0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210
-	.long	0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4
-	.long	0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725
-	.long	0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70
-	.long	0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926
-	.long	0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df
-	.long	0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8
-	.long	0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b
-	.long	0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001
-	.long	0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30
-	.long	0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910
-	.long	0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8
-	.long	0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53
-	.long	0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8
-	.long	0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb
-	.long	0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3
-	.long	0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60
-	.long	0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec
-	.long	0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9
-	.long	0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b
-	.long	0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207
-	.long	0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178
-	.long	0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6
-	.long	0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b
-	.long	0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493
-	.long	0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c
-	.long	0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a
-	.long	0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817
-___
-}
-$code.=<<___;
-.size	K${label},.-K${label}
-.globl	sha${label}_block_data_order
-sha${label}_block_data_order:
-	save	%sp,`-$frame-$locals`,%sp
-	and	$inp,`$align-1`,$tmp31
-	sllx	$len,`log(16*$SZ)/log(2)`,$len
-	andn	$inp,`$align-1`,$inp
-	sll	$tmp31,3,$tmp31
-	add	$inp,$len,$len
-___
-$code.=<<___ if ($SZ==8); # SHA512
-	mov	32,$tmp32
-	sub	$tmp32,$tmp31,$tmp32
-___
-$code.=<<___;
-.Lpic:	call	.+8
-	add	%o7,K${label}-.Lpic,$Ktbl
-
-	$LD	[$ctx+`0*$SZ`],$A
-	$LD	[$ctx+`1*$SZ`],$B
-	$LD	[$ctx+`2*$SZ`],$C
-	$LD	[$ctx+`3*$SZ`],$D
-	$LD	[$ctx+`4*$SZ`],$E
-	$LD	[$ctx+`5*$SZ`],$F
-	$LD	[$ctx+`6*$SZ`],$G
-	$LD	[$ctx+`7*$SZ`],$H
-
-.Lloop:
-___
-for ($i=0;$i<16;$i++)	{ &BODY_00_15($i,@V); unshift(@V,pop(@V)); }
-$code.=".L16_xx:\n";
-for (;$i<32;$i++)	{ &$BODY_16_XX($i,@V); unshift(@V,pop(@V)); }
-$code.=<<___;
-	and	$tmp2,0xfff,$tmp2
-	cmp	$tmp2,$lastK
-	bne	.L16_xx
-	add	$Ktbl,`16*$SZ`,$Ktbl	! Ktbl+=16
-
-___
-$code.=<<___ if ($SZ==4); # SHA256
-	$LD	[$ctx+`0*$SZ`],@X[0]
-	$LD	[$ctx+`1*$SZ`],@X[1]
-	$LD	[$ctx+`2*$SZ`],@X[2]
-	$LD	[$ctx+`3*$SZ`],@X[3]
-	$LD	[$ctx+`4*$SZ`],@X[4]
-	$LD	[$ctx+`5*$SZ`],@X[5]
-	$LD	[$ctx+`6*$SZ`],@X[6]
-	$LD	[$ctx+`7*$SZ`],@X[7]
-
-	add	$A,@X[0],$A
-	$ST	$A,[$ctx+`0*$SZ`]
-	add	$B,@X[1],$B
-	$ST	$B,[$ctx+`1*$SZ`]
-	add	$C,@X[2],$C
-	$ST	$C,[$ctx+`2*$SZ`]
-	add	$D,@X[3],$D
-	$ST	$D,[$ctx+`3*$SZ`]
-	add	$E,@X[4],$E
-	$ST	$E,[$ctx+`4*$SZ`]
-	add	$F,@X[5],$F
-	$ST	$F,[$ctx+`5*$SZ`]
-	add	$G,@X[6],$G
-	$ST	$G,[$ctx+`6*$SZ`]
-	add	$H,@X[7],$H
-	$ST	$H,[$ctx+`7*$SZ`]
-___
-$code.=<<___ if ($SZ==8); # SHA512
-	ld	[$ctx+`0*$SZ+0`],%l0
-	ld	[$ctx+`0*$SZ+4`],%l1
-	ld	[$ctx+`1*$SZ+0`],%l2
-	ld	[$ctx+`1*$SZ+4`],%l3
-	ld	[$ctx+`2*$SZ+0`],%l4
-	ld	[$ctx+`2*$SZ+4`],%l5
-	ld	[$ctx+`3*$SZ+0`],%l6
-
-	sllx	%l0,32,$tmp0
-	ld	[$ctx+`3*$SZ+4`],%l7
-	sllx	%l2,32,$tmp1
-	or	%l1,$tmp0,$tmp0
-	or	%l3,$tmp1,$tmp1
-	add	$tmp0,$A,$A
-	add	$tmp1,$B,$B
-	$ST	$A,[$ctx+`0*$SZ`]
-	sllx	%l4,32,$tmp2
-	$ST	$B,[$ctx+`1*$SZ`]
-	sllx	%l6,32,$T1
-	or	%l5,$tmp2,$tmp2
-	or	%l7,$T1,$T1
-	add	$tmp2,$C,$C
-	$ST	$C,[$ctx+`2*$SZ`]
-	add	$T1,$D,$D
-	$ST	$D,[$ctx+`3*$SZ`]
-
-	ld	[$ctx+`4*$SZ+0`],%l0
-	ld	[$ctx+`4*$SZ+4`],%l1
-	ld	[$ctx+`5*$SZ+0`],%l2
-	ld	[$ctx+`5*$SZ+4`],%l3
-	ld	[$ctx+`6*$SZ+0`],%l4
-	ld	[$ctx+`6*$SZ+4`],%l5
-	ld	[$ctx+`7*$SZ+0`],%l6
-
-	sllx	%l0,32,$tmp0
-	ld	[$ctx+`7*$SZ+4`],%l7
-	sllx	%l2,32,$tmp1
-	or	%l1,$tmp0,$tmp0
-	or	%l3,$tmp1,$tmp1
-	add	$tmp0,$E,$E
-	add	$tmp1,$F,$F
-	$ST	$E,[$ctx+`4*$SZ`]
-	sllx	%l4,32,$tmp2
-	$ST	$F,[$ctx+`5*$SZ`]
-	sllx	%l6,32,$T1
-	or	%l5,$tmp2,$tmp2
-	or	%l7,$T1,$T1
-	add	$tmp2,$G,$G
-	$ST	$G,[$ctx+`6*$SZ`]
-	add	$T1,$H,$H
-	$ST	$H,[$ctx+`7*$SZ`]
-___
-$code.=<<___;
-	add	$inp,`16*$SZ`,$inp		! advance inp
-	cmp	$inp,$len
-	bne	`$bits==64?"%xcc":"%icc"`,.Lloop
-	sub	$Ktbl,`($rounds-16)*$SZ`,$Ktbl	! rewind Ktbl
-
-	ret
-	restore
-.type	sha${label}_block_data_order,#function
-.size	sha${label}_block_data_order,(.-sha${label}_block_data_order)
-.asciz	"SHA${label} block transform for SPARCv9, CRYPTOGAMS by <appro\@openssl.org>"
-.align	4
-___
-
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-print $code;
-close STDOUT;