summaryrefslogtreecommitdiff
path: root/app/openssl/crypto/rc4/asm/rc4-586.pl
diff options
context:
space:
mode:
Diffstat (limited to 'app/openssl/crypto/rc4/asm/rc4-586.pl')
-rw-r--r--app/openssl/crypto/rc4/asm/rc4-586.pl410
1 files changed, 0 insertions, 410 deletions
diff --git a/app/openssl/crypto/rc4/asm/rc4-586.pl b/app/openssl/crypto/rc4/asm/rc4-586.pl
deleted file mode 100644
index 5c9ac6ad..00000000
--- a/app/openssl/crypto/rc4/asm/rc4-586.pl
+++ /dev/null
@@ -1,410 +0,0 @@
-#!/usr/bin/env perl
-
-# ====================================================================
-# [Re]written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# At some point it became apparent that the original SSLeay RC4
-# assembler implementation performs suboptimally on latest IA-32
-# microarchitectures. After re-tuning performance has changed as
-# following:
-#
-# Pentium -10%
-# Pentium III +12%
-# AMD +50%(*)
-# P4 +250%(**)
-#
-# (*) This number is actually a trade-off:-) It's possible to
-# achieve +72%, but at the cost of -48% off PIII performance.
-# In other words code performing further 13% faster on AMD
-# would perform almost 2 times slower on Intel PIII...
-# For reference! This code delivers ~80% of rc4-amd64.pl
-# performance on the same Opteron machine.
-# (**) This number requires compressed key schedule set up by
-# RC4_set_key [see commentary below for further details].
-#
-# <appro@fy.chalmers.se>
-
-# May 2011
-#
-# Optimize for Core2 and Westmere [and incidentally Opteron]. Current
-# performance in cycles per processed byte (less is better) and
-# improvement relative to previous version of this module is:
-#
-# Pentium 10.2 # original numbers
-# Pentium III 7.8(*)
-# Intel P4 7.5
-#
-# Opteron 6.1/+20% # new MMX numbers
-# Core2 5.3/+67%(**)
-# Westmere 5.1/+94%(**)
-# Sandy Bridge 5.0/+8%
-# Atom 12.6/+6%
-#
-# (*) PIII can actually deliver 6.6 cycles per byte with MMX code,
-# but this specific code performs poorly on Core2. And vice
-# versa, below MMX/SSE code delivering 5.8/7.1 on Core2 performs
-# poorly on PIII, at 8.0/14.5:-( As PIII is not a "hot" CPU
-# [anymore], I chose to discard PIII-specific code path and opt
-# for original IALU-only code, which is why MMX/SSE code path
-# is guarded by SSE2 bit (see below), not MMX/SSE.
-# (**) Performance vs. block size on Core2 and Westmere had a maximum
-# at ... 64 bytes block size. And it was quite a maximum, 40-60%
-# in comparison to largest 8KB block size. Above improvement
-# coefficients are for the largest block size.
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-push(@INC,"${dir}","${dir}../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],"rc4-586.pl");
-
-$xx="eax";
-$yy="ebx";
-$tx="ecx";
-$ty="edx";
-$inp="esi";
-$out="ebp";
-$dat="edi";
-
-sub RC4_loop {
- my $i=shift;
- my $func = ($i==0)?*mov:*or;
-
- &add (&LB($yy),&LB($tx));
- &mov ($ty,&DWP(0,$dat,$yy,4));
- &mov (&DWP(0,$dat,$yy,4),$tx);
- &mov (&DWP(0,$dat,$xx,4),$ty);
- &add ($ty,$tx);
- &inc (&LB($xx));
- &and ($ty,0xff);
- &ror ($out,8) if ($i!=0);
- if ($i<3) {
- &mov ($tx,&DWP(0,$dat,$xx,4));
- } else {
- &mov ($tx,&wparam(3)); # reload [re-biased] out
- }
- &$func ($out,&DWP(0,$dat,$ty,4));
-}
-
-if ($alt=0) {
- # >20% faster on Atom and Sandy Bridge[!], 8% faster on Opteron,
- # but ~40% slower on Core2 and Westmere... Attempt to add movz
- # brings down Opteron by 25%, Atom and Sandy Bridge by 15%, yet
- # on Core2 with movz it's almost 20% slower than below alternative
- # code... Yes, it's a total mess...
- my @XX=($xx,$out);
- $RC4_loop_mmx = sub { # SSE actually...
- my $i=shift;
- my $j=$i<=0?0:$i>>1;
- my $mm=$i<=0?"mm0":"mm".($i&1);
-
- &add (&LB($yy),&LB($tx));
- &lea (@XX[1],&DWP(1,@XX[0]));
- &pxor ("mm2","mm0") if ($i==0);
- &psllq ("mm1",8) if ($i==0);
- &and (@XX[1],0xff);
- &pxor ("mm0","mm0") if ($i<=0);
- &mov ($ty,&DWP(0,$dat,$yy,4));
- &mov (&DWP(0,$dat,$yy,4),$tx);
- &pxor ("mm1","mm2") if ($i==0);
- &mov (&DWP(0,$dat,$XX[0],4),$ty);
- &add (&LB($ty),&LB($tx));
- &movd (@XX[0],"mm7") if ($i==0);
- &mov ($tx,&DWP(0,$dat,@XX[1],4));
- &pxor ("mm1","mm1") if ($i==1);
- &movq ("mm2",&QWP(0,$inp)) if ($i==1);
- &movq (&QWP(-8,(@XX[0],$inp)),"mm1") if ($i==0);
- &pinsrw ($mm,&DWP(0,$dat,$ty,4),$j);
-
- push (@XX,shift(@XX)) if ($i>=0);
- }
-} else {
- # Using pinsrw here improves performane on Intel CPUs by 2-3%, but
- # brings down AMD by 7%...
- $RC4_loop_mmx = sub {
- my $i=shift;
-
- &add (&LB($yy),&LB($tx));
- &psllq ("mm1",8*(($i-1)&7)) if (abs($i)!=1);
- &mov ($ty,&DWP(0,$dat,$yy,4));
- &mov (&DWP(0,$dat,$yy,4),$tx);
- &mov (&DWP(0,$dat,$xx,4),$ty);
- &inc ($xx);
- &add ($ty,$tx);
- &movz ($xx,&LB($xx)); # (*)
- &movz ($ty,&LB($ty)); # (*)
- &pxor ("mm2",$i==1?"mm0":"mm1") if ($i>=0);
- &movq ("mm0",&QWP(0,$inp)) if ($i<=0);
- &movq (&QWP(-8,($out,$inp)),"mm2") if ($i==0);
- &mov ($tx,&DWP(0,$dat,$xx,4));
- &movd ($i>0?"mm1":"mm2",&DWP(0,$dat,$ty,4));
-
- # (*) This is the key to Core2 and Westmere performance.
- # Whithout movz out-of-order execution logic confuses
- # itself and fails to reorder loads and stores. Problem
- # appears to be fixed in Sandy Bridge...
- }
-}
-
-&external_label("OPENSSL_ia32cap_P");
-
-# void RC4(RC4_KEY *key,size_t len,const unsigned char *inp,unsigned char *out);
-&function_begin("RC4");
- &mov ($dat,&wparam(0)); # load key schedule pointer
- &mov ($ty, &wparam(1)); # load len
- &mov ($inp,&wparam(2)); # load inp
- &mov ($out,&wparam(3)); # load out
-
- &xor ($xx,$xx); # avoid partial register stalls
- &xor ($yy,$yy);
-
- &cmp ($ty,0); # safety net
- &je (&label("abort"));
-
- &mov (&LB($xx),&BP(0,$dat)); # load key->x
- &mov (&LB($yy),&BP(4,$dat)); # load key->y
- &add ($dat,8);
-
- &lea ($tx,&DWP(0,$inp,$ty));
- &sub ($out,$inp); # re-bias out
- &mov (&wparam(1),$tx); # save input+len
-
- &inc (&LB($xx));
-
- # detect compressed key schedule...
- &cmp (&DWP(256,$dat),-1);
- &je (&label("RC4_CHAR"));
-
- &mov ($tx,&DWP(0,$dat,$xx,4));
-
- &and ($ty,-4); # how many 4-byte chunks?
- &jz (&label("loop1"));
-
- &test ($ty,-8);
- &mov (&wparam(3),$out); # $out as accumulator in these loops
- &jz (&label("go4loop4"));
-
- &picmeup($out,"OPENSSL_ia32cap_P");
- &bt (&DWP(0,$out),26); # check SSE2 bit [could have been MMX]
- &jnc (&label("go4loop4"));
-
- &mov ($out,&wparam(3)) if (!$alt);
- &movd ("mm7",&wparam(3)) if ($alt);
- &and ($ty,-8);
- &lea ($ty,&DWP(-8,$inp,$ty));
- &mov (&DWP(-4,$dat),$ty); # save input+(len/8)*8-8
-
- &$RC4_loop_mmx(-1);
- &jmp(&label("loop_mmx_enter"));
-
- &set_label("loop_mmx",16);
- &$RC4_loop_mmx(0);
- &set_label("loop_mmx_enter");
- for ($i=1;$i<8;$i++) { &$RC4_loop_mmx($i); }
- &mov ($ty,$yy);
- &xor ($yy,$yy); # this is second key to Core2
- &mov (&LB($yy),&LB($ty)); # and Westmere performance...
- &cmp ($inp,&DWP(-4,$dat));
- &lea ($inp,&DWP(8,$inp));
- &jb (&label("loop_mmx"));
-
- if ($alt) {
- &movd ($out,"mm7");
- &pxor ("mm2","mm0");
- &psllq ("mm1",8);
- &pxor ("mm1","mm2");
- &movq (&QWP(-8,$out,$inp),"mm1");
- } else {
- &psllq ("mm1",56);
- &pxor ("mm2","mm1");
- &movq (&QWP(-8,$out,$inp),"mm2");
- }
- &emms ();
-
- &cmp ($inp,&wparam(1)); # compare to input+len
- &je (&label("done"));
- &jmp (&label("loop1"));
-
-&set_label("go4loop4",16);
- &lea ($ty,&DWP(-4,$inp,$ty));
- &mov (&wparam(2),$ty); # save input+(len/4)*4-4
-
- &set_label("loop4");
- for ($i=0;$i<4;$i++) { RC4_loop($i); }
- &ror ($out,8);
- &xor ($out,&DWP(0,$inp));
- &cmp ($inp,&wparam(2)); # compare to input+(len/4)*4-4
- &mov (&DWP(0,$tx,$inp),$out);# $tx holds re-biased out here
- &lea ($inp,&DWP(4,$inp));
- &mov ($tx,&DWP(0,$dat,$xx,4));
- &jb (&label("loop4"));
-
- &cmp ($inp,&wparam(1)); # compare to input+len
- &je (&label("done"));
- &mov ($out,&wparam(3)); # restore $out
-
- &set_label("loop1",16);
- &add (&LB($yy),&LB($tx));
- &mov ($ty,&DWP(0,$dat,$yy,4));
- &mov (&DWP(0,$dat,$yy,4),$tx);
- &mov (&DWP(0,$dat,$xx,4),$ty);
- &add ($ty,$tx);
- &inc (&LB($xx));
- &and ($ty,0xff);
- &mov ($ty,&DWP(0,$dat,$ty,4));
- &xor (&LB($ty),&BP(0,$inp));
- &lea ($inp,&DWP(1,$inp));
- &mov ($tx,&DWP(0,$dat,$xx,4));
- &cmp ($inp,&wparam(1)); # compare to input+len
- &mov (&BP(-1,$out,$inp),&LB($ty));
- &jb (&label("loop1"));
-
- &jmp (&label("done"));
-
-# this is essentially Intel P4 specific codepath...
-&set_label("RC4_CHAR",16);
- &movz ($tx,&BP(0,$dat,$xx));
- # strangely enough unrolled loop performs over 20% slower...
- &set_label("cloop1");
- &add (&LB($yy),&LB($tx));
- &movz ($ty,&BP(0,$dat,$yy));
- &mov (&BP(0,$dat,$yy),&LB($tx));
- &mov (&BP(0,$dat,$xx),&LB($ty));
- &add (&LB($ty),&LB($tx));
- &movz ($ty,&BP(0,$dat,$ty));
- &add (&LB($xx),1);
- &xor (&LB($ty),&BP(0,$inp));
- &lea ($inp,&DWP(1,$inp));
- &movz ($tx,&BP(0,$dat,$xx));
- &cmp ($inp,&wparam(1));
- &mov (&BP(-1,$out,$inp),&LB($ty));
- &jb (&label("cloop1"));
-
-&set_label("done");
- &dec (&LB($xx));
- &mov (&DWP(-4,$dat),$yy); # save key->y
- &mov (&BP(-8,$dat),&LB($xx)); # save key->x
-&set_label("abort");
-&function_end("RC4");
-
-########################################################################
-
-$inp="esi";
-$out="edi";
-$idi="ebp";
-$ido="ecx";
-$idx="edx";
-
-# void RC4_set_key(RC4_KEY *key,int len,const unsigned char *data);
-&function_begin("private_RC4_set_key");
- &mov ($out,&wparam(0)); # load key
- &mov ($idi,&wparam(1)); # load len
- &mov ($inp,&wparam(2)); # load data
- &picmeup($idx,"OPENSSL_ia32cap_P");
-
- &lea ($out,&DWP(2*4,$out)); # &key->data
- &lea ($inp,&DWP(0,$inp,$idi)); # $inp to point at the end
- &neg ($idi);
- &xor ("eax","eax");
- &mov (&DWP(-4,$out),$idi); # borrow key->y
-
- &bt (&DWP(0,$idx),20); # check for bit#20
- &jc (&label("c1stloop"));
-
-&set_label("w1stloop",16);
- &mov (&DWP(0,$out,"eax",4),"eax"); # key->data[i]=i;
- &add (&LB("eax"),1); # i++;
- &jnc (&label("w1stloop"));
-
- &xor ($ido,$ido);
- &xor ($idx,$idx);
-
-&set_label("w2ndloop",16);
- &mov ("eax",&DWP(0,$out,$ido,4));
- &add (&LB($idx),&BP(0,$inp,$idi));
- &add (&LB($idx),&LB("eax"));
- &add ($idi,1);
- &mov ("ebx",&DWP(0,$out,$idx,4));
- &jnz (&label("wnowrap"));
- &mov ($idi,&DWP(-4,$out));
- &set_label("wnowrap");
- &mov (&DWP(0,$out,$idx,4),"eax");
- &mov (&DWP(0,$out,$ido,4),"ebx");
- &add (&LB($ido),1);
- &jnc (&label("w2ndloop"));
-&jmp (&label("exit"));
-
-# Unlike all other x86 [and x86_64] implementations, Intel P4 core
-# [including EM64T] was found to perform poorly with above "32-bit" key
-# schedule, a.k.a. RC4_INT. Performance improvement for IA-32 hand-coded
-# assembler turned out to be 3.5x if re-coded for compressed 8-bit one,
-# a.k.a. RC4_CHAR! It's however inappropriate to just switch to 8-bit
-# schedule for x86[_64], because non-P4 implementations suffer from
-# significant performance losses then, e.g. PIII exhibits >2x
-# deterioration, and so does Opteron. In order to assure optimal
-# all-round performance, we detect P4 at run-time and set up compressed
-# key schedule, which is recognized by RC4 procedure.
-
-&set_label("c1stloop",16);
- &mov (&BP(0,$out,"eax"),&LB("eax")); # key->data[i]=i;
- &add (&LB("eax"),1); # i++;
- &jnc (&label("c1stloop"));
-
- &xor ($ido,$ido);
- &xor ($idx,$idx);
- &xor ("ebx","ebx");
-
-&set_label("c2ndloop",16);
- &mov (&LB("eax"),&BP(0,$out,$ido));
- &add (&LB($idx),&BP(0,$inp,$idi));
- &add (&LB($idx),&LB("eax"));
- &add ($idi,1);
- &mov (&LB("ebx"),&BP(0,$out,$idx));
- &jnz (&label("cnowrap"));
- &mov ($idi,&DWP(-4,$out));
- &set_label("cnowrap");
- &mov (&BP(0,$out,$idx),&LB("eax"));
- &mov (&BP(0,$out,$ido),&LB("ebx"));
- &add (&LB($ido),1);
- &jnc (&label("c2ndloop"));
-
- &mov (&DWP(256,$out),-1); # mark schedule as compressed
-
-&set_label("exit");
- &xor ("eax","eax");
- &mov (&DWP(-8,$out),"eax"); # key->x=0;
- &mov (&DWP(-4,$out),"eax"); # key->y=0;
-&function_end("private_RC4_set_key");
-
-# const char *RC4_options(void);
-&function_begin_B("RC4_options");
- &call (&label("pic_point"));
-&set_label("pic_point");
- &blindpop("eax");
- &lea ("eax",&DWP(&label("opts")."-".&label("pic_point"),"eax"));
- &picmeup("edx","OPENSSL_ia32cap_P");
- &mov ("edx",&DWP(0,"edx"));
- &bt ("edx",20);
- &jc (&label("1xchar"));
- &bt ("edx",26);
- &jnc (&label("ret"));
- &add ("eax",25);
- &ret ();
-&set_label("1xchar");
- &add ("eax",12);
-&set_label("ret");
- &ret ();
-&set_label("opts",64);
-&asciz ("rc4(4x,int)");
-&asciz ("rc4(1x,char)");
-&asciz ("rc4(8x,mmx)");
-&asciz ("RC4 for x86, CRYPTOGAMS by <appro\@openssl.org>");
-&align (64);
-&function_end_B("RC4_options");
-
-&asm_finish();
-