1 files changed, 270 insertions, 0 deletions
diff --git a/app/openssl/crypto/rc4/asm/rc4-586.pl b/app/openssl/crypto/rc4/asm/rc4-586.pl
new file mode 100644
index 00000000..38a44a70
--- /dev/null
+++ b/app/openssl/crypto/rc4/asm/rc4-586.pl
@@ -0,0 +1,270 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# [Re]written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# At some point it became apparent that the original SSLeay RC4
+# assembler implementation performs suboptimally on latest IA-32
+# microarchitectures. After re-tuning performance has changed as
+# following:
+#
+# Pentium	-10%
+# Pentium III	+12%
+# AMD		+50%(*)
+# P4		+250%(**)
+#
+# (*)	This number is actually a trade-off:-) It's possible to
+#	achieve	+72%, but at the cost of -48% off PIII performance.
+#	In other words code performing further 13% faster on AMD
+#	would perform almost 2 times slower on Intel PIII...
+#	For reference! This code delivers ~80% of rc4-amd64.pl
+#	performance on the same Opteron machine.
+# (**)	This number requires compressed key schedule set up by
+#	RC4_set_key [see commentary below for further details].
+#
+#					<appro@fy.chalmers.se>
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
+require "x86asm.pl";
+
+&asm_init($ARGV[0],"rc4-586.pl");
+
+$xx="eax";
+$yy="ebx";
+$tx="ecx";
+$ty="edx";
+$inp="esi";
+$out="ebp";
+$dat="edi";
+
+sub RC4_loop {
+  my $i=shift;
+  my $func = ($i==0)?*mov:*or;
+
+	&add	(&LB($yy),&LB($tx));
+	&mov	($ty,&DWP(0,$dat,$yy,4));
+	&mov	(&DWP(0,$dat,$yy,4),$tx);
+	&mov	(&DWP(0,$dat,$xx,4),$ty);
+	&add	($ty,$tx);
+	&inc	(&LB($xx));
+	&and	($ty,0xff);
+	&ror	($out,8)	if ($i!=0);
+	if ($i<3) {
+	  &mov	($tx,&DWP(0,$dat,$xx,4));
+	} else {
+	  &mov	($tx,&wparam(3));	# reload [re-biased] out
+	}
+	&$func	($out,&DWP(0,$dat,$ty,4));
+}
+
+# void RC4(RC4_KEY *key,size_t len,const unsigned char *inp,unsigned char *out);
+&function_begin("RC4");
+	&mov	($dat,&wparam(0));	# load key schedule pointer
+	&mov	($ty, &wparam(1));	# load len
+	&mov	($inp,&wparam(2));	# load inp
+	&mov	($out,&wparam(3));	# load out
+
+	&xor	($xx,$xx);		# avoid partial register stalls
+	&xor	($yy,$yy);
+
+	&cmp	($ty,0);		# safety net
+	&je	(&label("abort"));
+
+	&mov	(&LB($xx),&BP(0,$dat));	# load key->x
+	&mov	(&LB($yy),&BP(4,$dat));	# load key->y
+	&add	($dat,8);
+
+	&lea	($tx,&DWP(0,$inp,$ty));
+	&sub	($out,$inp);		# re-bias out
+	&mov	(&wparam(1),$tx);	# save input+len
+
+	&inc	(&LB($xx));
+
+	# detect compressed key schedule...
+	&cmp	(&DWP(256,$dat),-1);
+	&je	(&label("RC4_CHAR"));
+
+	&mov	($tx,&DWP(0,$dat,$xx,4));
+
+	&and	($ty,-4);		# how many 4-byte chunks?
+	&jz	(&label("loop1"));
+
+	&lea	($ty,&DWP(-4,$inp,$ty));
+	&mov	(&wparam(2),$ty);	# save input+(len/4)*4-4
+	&mov	(&wparam(3),$out);	# $out as accumulator in this loop
+
+	&set_label("loop4",16);
+		for ($i=0;$i<4;$i++) { RC4_loop($i); }
+		&ror	($out,8);
+		&xor	($out,&DWP(0,$inp));
+		&cmp	($inp,&wparam(2));	# compare to input+(len/4)*4-4
+		&mov	(&DWP(0,$tx,$inp),$out);# $tx holds re-biased out here
+		&lea	($inp,&DWP(4,$inp));
+		&mov	($tx,&DWP(0,$dat,$xx,4));
+	&jb	(&label("loop4"));
+
+	&cmp	($inp,&wparam(1));	# compare to input+len
+	&je	(&label("done"));
+	&mov	($out,&wparam(3));	# restore $out
+
+	&set_label("loop1",16);
+		&add	(&LB($yy),&LB($tx));
+		&mov	($ty,&DWP(0,$dat,$yy,4));
+		&mov	(&DWP(0,$dat,$yy,4),$tx);
+		&mov	(&DWP(0,$dat,$xx,4),$ty);
+		&add	($ty,$tx);
+		&inc	(&LB($xx));
+		&and	($ty,0xff);
+		&mov	($ty,&DWP(0,$dat,$ty,4));
+		&xor	(&LB($ty),&BP(0,$inp));
+		&lea	($inp,&DWP(1,$inp));
+		&mov	($tx,&DWP(0,$dat,$xx,4));
+		&cmp	($inp,&wparam(1));	# compare to input+len
+		&mov	(&BP(-1,$out,$inp),&LB($ty));
+	&jb	(&label("loop1"));
+
+	&jmp	(&label("done"));
+
+# this is essentially Intel P4 specific codepath...
+&set_label("RC4_CHAR",16);
+	&movz	($tx,&BP(0,$dat,$xx));
+	# strangely enough unrolled loop performs over 20% slower...
+	&set_label("cloop1");
+		&add	(&LB($yy),&LB($tx));
+		&movz	($ty,&BP(0,$dat,$yy));
+		&mov	(&BP(0,$dat,$yy),&LB($tx));
+		&mov	(&BP(0,$dat,$xx),&LB($ty));
+		&add	(&LB($ty),&LB($tx));
+		&movz	($ty,&BP(0,$dat,$ty));
+		&add	(&LB($xx),1);
+		&xor	(&LB($ty),&BP(0,$inp));
+		&lea	($inp,&DWP(1,$inp));
+		&movz	($tx,&BP(0,$dat,$xx));
+		&cmp	($inp,&wparam(1));
+		&mov	(&BP(-1,$out,$inp),&LB($ty));
+	&jb	(&label("cloop1"));
+
+&set_label("done");
+	&dec	(&LB($xx));
+	&mov	(&BP(-4,$dat),&LB($yy));	# save key->y
+	&mov	(&BP(-8,$dat),&LB($xx));	# save key->x
+&set_label("abort");
+&function_end("RC4");
+
+########################################################################
+
+$inp="esi";
+$out="edi";
+$idi="ebp";
+$ido="ecx";
+$idx="edx";
+
+&external_label("OPENSSL_ia32cap_P");
+
+# void RC4_set_key(RC4_KEY *key,int len,const unsigned char *data);
+&function_begin("RC4_set_key");
+	&mov	($out,&wparam(0));		# load key
+	&mov	($idi,&wparam(1));		# load len
+	&mov	($inp,&wparam(2));		# load data
+	&picmeup($idx,"OPENSSL_ia32cap_P");
+
+	&lea	($out,&DWP(2*4,$out));		# &key->data
+	&lea	($inp,&DWP(0,$inp,$idi));	# $inp to point at the end
+	&neg	($idi);
+	&xor	("eax","eax");
+	&mov	(&DWP(-4,$out),$idi);		# borrow key->y
+
+	&bt	(&DWP(0,$idx),20);		# check for bit#20
+	&jc	(&label("c1stloop"));
+
+&set_label("w1stloop",16);
+	&mov	(&DWP(0,$out,"eax",4),"eax");	# key->data[i]=i;
+	&add	(&LB("eax"),1);			# i++;
+	&jnc	(&label("w1stloop"));
+
+	&xor	($ido,$ido);
+	&xor	($idx,$idx);
+
+&set_label("w2ndloop",16);
+	&mov	("eax",&DWP(0,$out,$ido,4));
+	&add	(&LB($idx),&BP(0,$inp,$idi));
+	&add	(&LB($idx),&LB("eax"));
+	&add	($idi,1);
+	&mov	("ebx",&DWP(0,$out,$idx,4));
+	&jnz	(&label("wnowrap"));
+	  &mov	($idi,&DWP(-4,$out));
+	&set_label("wnowrap");
+	&mov	(&DWP(0,$out,$idx,4),"eax");
+	&mov	(&DWP(0,$out,$ido,4),"ebx");
+	&add	(&LB($ido),1);
+	&jnc	(&label("w2ndloop"));
+&jmp	(&label("exit"));
+
+# Unlike all other x86 [and x86_64] implementations, Intel P4 core
+# [including EM64T] was found to perform poorly with above "32-bit" key
+# schedule, a.k.a. RC4_INT. Performance improvement for IA-32 hand-coded
+# assembler turned out to be 3.5x if re-coded for compressed 8-bit one,
+# a.k.a. RC4_CHAR! It's however inappropriate to just switch to 8-bit
+# schedule for x86[_64], because non-P4 implementations suffer from
+# significant performance losses then, e.g. PIII exhibits >2x
+# deterioration, and so does Opteron. In order to assure optimal
+# all-round performance, we detect P4 at run-time and set up compressed
+# key schedule, which is recognized by RC4 procedure.
+
+&set_label("c1stloop",16);
+	&mov	(&BP(0,$out,"eax"),&LB("eax"));	# key->data[i]=i;
+	&add	(&LB("eax"),1);			# i++;
+	&jnc	(&label("c1stloop"));
+
+	&xor	($ido,$ido);
+	&xor	($idx,$idx);
+	&xor	("ebx","ebx");
+
+&set_label("c2ndloop",16);
+	&mov	(&LB("eax"),&BP(0,$out,$ido));
+	&add	(&LB($idx),&BP(0,$inp,$idi));
+	&add	(&LB($idx),&LB("eax"));
+	&add	($idi,1);
+	&mov	(&LB("ebx"),&BP(0,$out,$idx));
+	&jnz	(&label("cnowrap"));
+	  &mov	($idi,&DWP(-4,$out));
+	&set_label("cnowrap");
+	&mov	(&BP(0,$out,$idx),&LB("eax"));
+	&mov	(&BP(0,$out,$ido),&LB("ebx"));
+	&add	(&LB($ido),1);
+	&jnc	(&label("c2ndloop"));
+
+	&mov	(&DWP(256,$out),-1);		# mark schedule as compressed
+
+&set_label("exit");
+	&xor	("eax","eax");
+	&mov	(&DWP(-8,$out),"eax");		# key->x=0;
+	&mov	(&DWP(-4,$out),"eax");		# key->y=0;
+&function_end("RC4_set_key");
+
+# const char *RC4_options(void);
+&function_begin_B("RC4_options");
+	&call	(&label("pic_point"));
+&set_label("pic_point");
+	&blindpop("eax");
+	&lea	("eax",&DWP(&label("opts")."-".&label("pic_point"),"eax"));
+	&picmeup("edx","OPENSSL_ia32cap_P");
+	&bt	(&DWP(0,"edx"),20);
+	&jnc	(&label("skip"));
+	  &add	("eax",12);
+	&set_label("skip");
+	&ret	();
+&set_label("opts",64);
+&asciz	("rc4(4x,int)");
+&asciz	("rc4(1x,char)");
+&asciz	("RC4 for x86, CRYPTOGAMS by <appro\@openssl.org>");
+&align	(64);
+&function_end_B("RC4_options");
+
+&asm_finish();
+