diff options
Diffstat (limited to 'app/openssl/crypto/opensslconf.h')
| -rw-r--r-- | app/openssl/crypto/opensslconf.h | 256 |
1 files changed, 8 insertions, 248 deletions
diff --git a/app/openssl/crypto/opensslconf.h b/app/openssl/crypto/opensslconf.h index 26ac6ba3..94212a08 100644 --- a/app/openssl/crypto/opensslconf.h +++ b/app/openssl/crypto/opensslconf.h @@ -1,250 +1,10 @@ -/* opensslconf.h */ -/* WARNING: Generated automatically from opensslconf.h.in by Configure. */ - -/* OpenSSL was configured with the following options: */ -#ifndef OPENSSL_DOING_MAKEDEPEND - - -#ifndef OPENSSL_NO_CAST -# define OPENSSL_NO_CAST +// Auto-generated - DO NOT EDIT! +#ifndef OPENSSL_SYS_TRUSTY +#if defined(__LP64__) +#include "opensslconf-64.h" +#else +#include "opensslconf-32.h" #endif -#ifndef OPENSSL_NO_GMP -# define OPENSSL_NO_GMP +#else +#include "opensslconf-trusty.h" #endif -#ifndef OPENSSL_NO_IDEA -# define OPENSSL_NO_IDEA -#endif -#ifndef OPENSSL_NO_JPAKE -# define OPENSSL_NO_JPAKE -#endif -#ifndef OPENSSL_NO_KRB5 -# define OPENSSL_NO_KRB5 -#endif -#ifndef OPENSSL_NO_MD2 -# define OPENSSL_NO_MD2 -#endif -#ifndef OPENSSL_NO_RC5 -# define OPENSSL_NO_RC5 -#endif -#ifndef OPENSSL_NO_RFC3779 -# define OPENSSL_NO_RFC3779 -#endif -#ifndef OPENSSL_NO_SEED -# define OPENSSL_NO_SEED -#endif -#ifndef OPENSSL_NO_SHA0 -# define OPENSSL_NO_SHA0 -#endif -#ifndef OPENSSL_NO_STORE -# define OPENSSL_NO_STORE -#endif -#ifndef OPENSSL_NO_WHRLPOOL -# define OPENSSL_NO_WHRLPOOL -#endif - -#endif /* OPENSSL_DOING_MAKEDEPEND */ - -#ifndef OPENSSL_THREADS -# define OPENSSL_THREADS -#endif -#ifndef OPENSSL_NO_DYNAMIC_ENGINE -# define OPENSSL_NO_DYNAMIC_ENGINE -#endif - -/* The OPENSSL_NO_* macros are also defined as NO_* if the application - asks for it. This is a transient feature that is provided for those - who haven't had the time to do the appropriate changes in their - applications. */ -#ifdef OPENSSL_ALGORITHM_DEFINES -# if defined(OPENSSL_NO_CAST) && !defined(NO_CAST) -# define NO_CAST -# endif -# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) -# define NO_GMP -# endif -# if defined(OPENSSL_NO_IDEA) && !defined(NO_IDEA) -# define NO_IDEA -# endif -# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) -# define NO_JPAKE -# endif -# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) -# define NO_KRB5 -# endif -# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) -# define NO_MD2 -# endif -# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5) -# define NO_RC5 -# endif -# if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779) -# define NO_RFC3779 -# endif -# if defined(OPENSSL_NO_SEED) && !defined(NO_SEED) -# define NO_SEED -# endif -# if defined(OPENSSL_NO_SHA0) && !defined(NO_SHA0) -# define NO_SHA0 -# endif -# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) -# define NO_STORE -# endif -# if defined(OPENSSL_NO_WHRLPOOL) && !defined(NO_WHRLPOOL) -# define NO_WHRLPOOL -# endif -#endif - -/* crypto/opensslconf.h.in */ - -/* Generate 80386 code? */ -#undef I386_ONLY - -#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ -#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) -#define ENGINESDIR "/usr/local/ssl/lib/engines" -#define OPENSSLDIR "/usr/local/ssl" -#endif -#endif - -#undef OPENSSL_UNISTD -#define OPENSSL_UNISTD <unistd.h> - -#undef OPENSSL_EXPORT_VAR_AS_FUNCTION - -#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) -#define IDEA_INT unsigned int -#endif - -#if defined(HEADER_MD2_H) && !defined(MD2_INT) -#define MD2_INT unsigned int -#endif - -#if defined(HEADER_RC2_H) && !defined(RC2_INT) -/* I need to put in a mod for the alpha - eay */ -#define RC2_INT unsigned int -#endif - -#if defined(HEADER_RC4_H) -#if !defined(RC4_INT) -/* using int types make the structure larger but make the code faster - * on most boxes I have tested - up to %20 faster. */ -/* - * I don't know what does "most" mean, but declaring "int" is a must on: - * - Intel P6 because partial register stalls are very expensive; - * - elder Alpha because it lacks byte load/store instructions; - */ -#define RC4_INT unsigned char -#endif -#if !defined(RC4_CHUNK) -/* - * This enables code handling data aligned at natural CPU word - * boundary. See crypto/rc4/rc4_enc.c for further details. - */ -#define RC4_CHUNK unsigned long -#endif -#endif - -#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) -/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a - * %20 speed up (longs are 8 bytes, int's are 4). */ -#ifndef DES_LONG -#define DES_LONG unsigned int -#endif -#endif - -#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) -#define CONFIG_HEADER_BN_H -#define BN_LLONG - -/* Should we define BN_DIV2W here? */ - -/* Only one for the following should be defined */ -#undef SIXTY_FOUR_BIT_LONG -#undef SIXTY_FOUR_BIT -#define THIRTY_TWO_BIT -#endif - -#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) -#define CONFIG_HEADER_RC4_LOCL_H -/* if this is defined data[i] is used instead of *data, this is a %20 - * speedup on x86 */ -#undef RC4_INDEX -#endif - -#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) -#define CONFIG_HEADER_BF_LOCL_H -#define BF_PTR -#endif /* HEADER_BF_LOCL_H */ - -#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) -#define CONFIG_HEADER_DES_LOCL_H -#ifndef DES_DEFAULT_OPTIONS -/* the following is tweaked from a config script, that is why it is a - * protected undef/define */ -#ifndef DES_PTR -#undef DES_PTR -#endif - -/* This helps C compiler generate the correct code for multiple functional - * units. It reduces register dependancies at the expense of 2 more - * registers */ -#ifndef DES_RISC1 -#undef DES_RISC1 -#endif - -#ifndef DES_RISC2 -#undef DES_RISC2 -#endif - -#if defined(DES_RISC1) && defined(DES_RISC2) -YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! -#endif - -/* Unroll the inner loop, this sometimes helps, sometimes hinders. - * Very mucy CPU dependant */ -#ifndef DES_UNROLL -#define DES_UNROLL -#endif - -/* These default values were supplied by - * Peter Gutman <pgut001@cs.auckland.ac.nz> - * They are only used if nothing else has been defined */ -#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) -/* Special defines which change the way the code is built depending on the - CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find - even newer MIPS CPU's, but at the moment one size fits all for - optimization options. Older Sparc's work better with only UNROLL, but - there's no way to tell at compile time what it is you're running on */ - -#if defined( sun ) /* Newer Sparc's */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#elif defined( __ultrix ) /* Older MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined( __osf1__ ) /* Alpha */ -# define DES_PTR -# define DES_RISC2 -#elif defined ( _AIX ) /* RS6000 */ - /* Unknown */ -#elif defined( __hpux ) /* HP-PA */ - /* Unknown */ -#elif defined( __aux ) /* 68K */ - /* Unknown */ -#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ -# define DES_UNROLL -#elif defined( __sgi ) /* Newer MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#endif /* Systems-specific speed defines */ -#endif - -#endif /* DES_DEFAULT_OPTIONS */ -#endif /* HEADER_DES_LOCL_H */ |