diff options
Diffstat (limited to 'app/openssl/crypto/bn')
72 files changed, 0 insertions, 37961 deletions
diff --git a/app/openssl/crypto/bn/asm/README b/app/openssl/crypto/bn/asm/README deleted file mode 100644 index b0f3a68a..00000000 --- a/app/openssl/crypto/bn/asm/README +++ /dev/null @@ -1,27 +0,0 @@ -<OBSOLETE> - -All assember in this directory are just version of the file -crypto/bn/bn_asm.c. - -Quite a few of these files are just the assember output from gcc since on -quite a few machines they are 2 times faster than the system compiler. - -For the x86, I have hand written assember because of the bad job all -compilers seem to do on it. This normally gives a 2 time speed up in the RSA -routines. - -For the DEC alpha, I also hand wrote the assember (except the division which -is just the output from the C compiler pasted on the end of the file). -On the 2 alpha C compilers I had access to, it was not possible to do -64b x 64b -> 128b calculations (both long and the long long data types -were 64 bits). So the hand assember gives access to the 128 bit result and -a 2 times speedup :-). - -There are 3 versions of assember for the HP PA-RISC. - -pa-risc.s is the origional one which works fine and generated using gcc :-) - -pa-risc2W.s and pa-risc2.s are 64 and 32-bit PA-RISC 2.0 implementations -by Chris Ruemmler from HP (with some help from the HP C compiler). - -</OBSOLETE> diff --git a/app/openssl/crypto/bn/asm/alpha-mont.pl b/app/openssl/crypto/bn/asm/alpha-mont.pl deleted file mode 100644 index 03596e20..00000000 --- a/app/openssl/crypto/bn/asm/alpha-mont.pl +++ /dev/null @@ -1,321 +0,0 @@ -#!/usr/bin/env perl -# -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== -# -# On 21264 RSA sign performance improves by 70/35/20/15 percent for -# 512/1024/2048/4096 bit key lengths. This is against vendor compiler -# instructed to '-tune host' code with in-line assembler. Other -# benchmarks improve by 15-20%. To anchor it to something else, the -# code provides approximately the same performance per GHz as AMD64. -# I.e. if you compare 1GHz 21264 and 2GHz Opteron, you'll observe ~2x -# difference. - -# int bn_mul_mont( -$rp="a0"; # BN_ULONG *rp, -$ap="a1"; # const BN_ULONG *ap, -$bp="a2"; # const BN_ULONG *bp, -$np="a3"; # const BN_ULONG *np, -$n0="a4"; # const BN_ULONG *n0, -$num="a5"; # int num); - -$lo0="t0"; -$hi0="t1"; -$lo1="t2"; -$hi1="t3"; -$aj="t4"; -$bi="t5"; -$nj="t6"; -$tp="t7"; -$alo="t8"; -$ahi="t9"; -$nlo="t10"; -$nhi="t11"; -$tj="t12"; -$i="s3"; -$j="s4"; -$m1="s5"; - -$code=<<___; -#ifdef __linux__ -#include <asm/regdef.h> -#else -#include <asm.h> -#include <regdef.h> -#endif - -.text - -.set noat -.set noreorder - -.globl bn_mul_mont -.align 5 -.ent bn_mul_mont -bn_mul_mont: - lda sp,-48(sp) - stq ra,0(sp) - stq s3,8(sp) - stq s4,16(sp) - stq s5,24(sp) - stq fp,32(sp) - mov sp,fp - .mask 0x0400f000,-48 - .frame fp,48,ra - .prologue 0 - - .align 4 - .set reorder - sextl $num,$num - mov 0,v0 - cmplt $num,4,AT - bne AT,.Lexit - - ldq $hi0,0($ap) # ap[0] - s8addq $num,16,AT - ldq $aj,8($ap) - subq sp,AT,sp - ldq $bi,0($bp) # bp[0] - lda AT,-4096(zero) # mov -4096,AT - ldq $n0,0($n0) - and sp,AT,sp - - mulq $hi0,$bi,$lo0 - ldq $hi1,0($np) # np[0] - umulh $hi0,$bi,$hi0 - ldq $nj,8($np) - - mulq $lo0,$n0,$m1 - - mulq $hi1,$m1,$lo1 - umulh $hi1,$m1,$hi1 - - addq $lo1,$lo0,$lo1 - cmpult $lo1,$lo0,AT - addq $hi1,AT,$hi1 - - mulq $aj,$bi,$alo - mov 2,$j - umulh $aj,$bi,$ahi - mov sp,$tp - - mulq $nj,$m1,$nlo - s8addq $j,$ap,$aj - umulh $nj,$m1,$nhi - s8addq $j,$np,$nj -.align 4 -.L1st: - .set noreorder - ldq $aj,0($aj) - addl $j,1,$j - ldq $nj,0($nj) - lda $tp,8($tp) - - addq $alo,$hi0,$lo0 - mulq $aj,$bi,$alo - cmpult $lo0,$hi0,AT - addq $nlo,$hi1,$lo1 - - mulq $nj,$m1,$nlo - addq $ahi,AT,$hi0 - cmpult $lo1,$hi1,v0 - cmplt $j,$num,$tj - - umulh $aj,$bi,$ahi - addq $nhi,v0,$hi1 - addq $lo1,$lo0,$lo1 - s8addq $j,$ap,$aj - - umulh $nj,$m1,$nhi - cmpult $lo1,$lo0,v0 - addq $hi1,v0,$hi1 - s8addq $j,$np,$nj - - stq $lo1,-8($tp) - nop - unop - bne $tj,.L1st - .set reorder - - addq $alo,$hi0,$lo0 - addq $nlo,$hi1,$lo1 - cmpult $lo0,$hi0,AT - cmpult $lo1,$hi1,v0 - addq $ahi,AT,$hi0 - addq $nhi,v0,$hi1 - - addq $lo1,$lo0,$lo1 - cmpult $lo1,$lo0,v0 - addq $hi1,v0,$hi1 - - stq $lo1,0($tp) - - addq $hi1,$hi0,$hi1 - cmpult $hi1,$hi0,AT - stq $hi1,8($tp) - stq AT,16($tp) - - mov 1,$i -.align 4 -.Louter: - s8addq $i,$bp,$bi - ldq $hi0,0($ap) - ldq $aj,8($ap) - ldq $bi,0($bi) - ldq $hi1,0($np) - ldq $nj,8($np) - ldq $tj,0(sp) - - mulq $hi0,$bi,$lo0 - umulh $hi0,$bi,$hi0 - - addq $lo0,$tj,$lo0 - cmpult $lo0,$tj,AT - addq $hi0,AT,$hi0 - - mulq $lo0,$n0,$m1 - - mulq $hi1,$m1,$lo1 - umulh $hi1,$m1,$hi1 - - addq $lo1,$lo0,$lo1 - cmpult $lo1,$lo0,AT - mov 2,$j - addq $hi1,AT,$hi1 - - mulq $aj,$bi,$alo - mov sp,$tp - umulh $aj,$bi,$ahi - - mulq $nj,$m1,$nlo - s8addq $j,$ap,$aj - umulh $nj,$m1,$nhi -.align 4 -.Linner: - .set noreorder - ldq $tj,8($tp) #L0 - nop #U1 - ldq $aj,0($aj) #L1 - s8addq $j,$np,$nj #U0 - - ldq $nj,0($nj) #L0 - nop #U1 - addq $alo,$hi0,$lo0 #L1 - lda $tp,8($tp) - - mulq $aj,$bi,$alo #U1 - cmpult $lo0,$hi0,AT #L0 - addq $nlo,$hi1,$lo1 #L1 - addl $j,1,$j - - mulq $nj,$m1,$nlo #U1 - addq $ahi,AT,$hi0 #L0 - addq $lo0,$tj,$lo0 #L1 - cmpult $lo1,$hi1,v0 #U0 - - umulh $aj,$bi,$ahi #U1 - cmpult $lo0,$tj,AT #L0 - addq $lo1,$lo0,$lo1 #L1 - addq $nhi,v0,$hi1 #U0 - - umulh $nj,$m1,$nhi #U1 - s8addq $j,$ap,$aj #L0 - cmpult $lo1,$lo0,v0 #L1 - cmplt $j,$num,$tj #U0 # borrow $tj - - addq $hi0,AT,$hi0 #L0 - addq $hi1,v0,$hi1 #U1 - stq $lo1,-8($tp) #L1 - bne $tj,.Linner #U0 - .set reorder - - ldq $tj,8($tp) - addq $alo,$hi0,$lo0 - addq $nlo,$hi1,$lo1 - cmpult $lo0,$hi0,AT - cmpult $lo1,$hi1,v0 - addq $ahi,AT,$hi0 - addq $nhi,v0,$hi1 - - addq $lo0,$tj,$lo0 - cmpult $lo0,$tj,AT - addq $hi0,AT,$hi0 - - ldq $tj,16($tp) - addq $lo1,$lo0,$j - cmpult $j,$lo0,v0 - addq $hi1,v0,$hi1 - - addq $hi1,$hi0,$lo1 - stq $j,0($tp) - cmpult $lo1,$hi0,$hi1 - addq $lo1,$tj,$lo1 - cmpult $lo1,$tj,AT - addl $i,1,$i - addq $hi1,AT,$hi1 - stq $lo1,8($tp) - cmplt $i,$num,$tj # borrow $tj - stq $hi1,16($tp) - bne $tj,.Louter - - s8addq $num,sp,$tj # &tp[num] - mov $rp,$bp # put rp aside - mov sp,$tp - mov sp,$ap - mov 0,$hi0 # clear borrow bit - -.align 4 -.Lsub: ldq $lo0,0($tp) - ldq $lo1,0($np) - lda $tp,8($tp) - lda $np,8($np) - subq $lo0,$lo1,$lo1 # tp[i]-np[i] - cmpult $lo0,$lo1,AT - subq $lo1,$hi0,$lo0 - cmpult $lo1,$lo0,$hi0 - or $hi0,AT,$hi0 - stq $lo0,0($rp) - cmpult $tp,$tj,v0 - lda $rp,8($rp) - bne v0,.Lsub - - subq $hi1,$hi0,$hi0 # handle upmost overflow bit - mov sp,$tp - mov $bp,$rp # restore rp - - and sp,$hi0,$ap - bic $bp,$hi0,$bp - bis $bp,$ap,$ap # ap=borrow?tp:rp - -.align 4 -.Lcopy: ldq $aj,0($ap) # copy or in-place refresh - lda $tp,8($tp) - lda $rp,8($rp) - lda $ap,8($ap) - stq zero,-8($tp) # zap tp - cmpult $tp,$tj,AT - stq $aj,-8($rp) - bne AT,.Lcopy - mov 1,v0 - -.Lexit: - .set noreorder - mov fp,sp - /*ldq ra,0(sp)*/ - ldq s3,8(sp) - ldq s4,16(sp) - ldq s5,24(sp) - ldq fp,32(sp) - lda sp,48(sp) - ret (ra) -.end bn_mul_mont -.ascii "Montgomery Multiplication for Alpha, CRYPTOGAMS by <appro\@openssl.org>" -.align 2 -___ - -print $code; -close STDOUT; diff --git a/app/openssl/crypto/bn/asm/armv4-mont.pl b/app/openssl/crypto/bn/asm/armv4-mont.pl deleted file mode 100644 index 14e0d2d1..00000000 --- a/app/openssl/crypto/bn/asm/armv4-mont.pl +++ /dev/null @@ -1,201 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# January 2007. - -# Montgomery multiplication for ARMv4. -# -# Performance improvement naturally varies among CPU implementations -# and compilers. The code was observed to provide +65-35% improvement -# [depending on key length, less for longer keys] on ARM920T, and -# +115-80% on Intel IXP425. This is compared to pre-bn_mul_mont code -# base and compiler generated code with in-lined umull and even umlal -# instructions. The latter means that this code didn't really have an -# "advantage" of utilizing some "secret" instruction. -# -# The code is interoperable with Thumb ISA and is rather compact, less -# than 1/2KB. Windows CE port would be trivial, as it's exclusively -# about decorations, ABI and instruction syntax are identical. - -$num="r0"; # starts as num argument, but holds &tp[num-1] -$ap="r1"; -$bp="r2"; $bi="r2"; $rp="r2"; -$np="r3"; -$tp="r4"; -$aj="r5"; -$nj="r6"; -$tj="r7"; -$n0="r8"; -########### # r9 is reserved by ELF as platform specific, e.g. TLS pointer -$alo="r10"; # sl, gcc uses it to keep @GOT -$ahi="r11"; # fp -$nlo="r12"; # ip -########### # r13 is stack pointer -$nhi="r14"; # lr -########### # r15 is program counter - -#### argument block layout relative to &tp[num-1], a.k.a. $num -$_rp="$num,#12*4"; -# ap permanently resides in r1 -$_bp="$num,#13*4"; -# np permanently resides in r3 -$_n0="$num,#14*4"; -$_num="$num,#15*4"; $_bpend=$_num; - -$code=<<___; -.text - -.global bn_mul_mont -.type bn_mul_mont,%function - -.align 2 -bn_mul_mont: - stmdb sp!,{r0,r2} @ sp points at argument block - ldr $num,[sp,#3*4] @ load num - cmp $num,#2 - movlt r0,#0 - addlt sp,sp,#2*4 - blt .Labrt - - stmdb sp!,{r4-r12,lr} @ save 10 registers - - mov $num,$num,lsl#2 @ rescale $num for byte count - sub sp,sp,$num @ alloca(4*num) - sub sp,sp,#4 @ +extra dword - sub $num,$num,#4 @ "num=num-1" - add $tp,$bp,$num @ &bp[num-1] - - add $num,sp,$num @ $num to point at &tp[num-1] - ldr $n0,[$_n0] @ &n0 - ldr $bi,[$bp] @ bp[0] - ldr $aj,[$ap],#4 @ ap[0],ap++ - ldr $nj,[$np],#4 @ np[0],np++ - ldr $n0,[$n0] @ *n0 - str $tp,[$_bpend] @ save &bp[num] - - umull $alo,$ahi,$aj,$bi @ ap[0]*bp[0] - str $n0,[$_n0] @ save n0 value - mul $n0,$alo,$n0 @ "tp[0]"*n0 - mov $nlo,#0 - umlal $alo,$nlo,$nj,$n0 @ np[0]*n0+"t[0]" - mov $tp,sp - -.L1st: - ldr $aj,[$ap],#4 @ ap[j],ap++ - mov $alo,$ahi - mov $ahi,#0 - umlal $alo,$ahi,$aj,$bi @ ap[j]*bp[0] - ldr $nj,[$np],#4 @ np[j],np++ - mov $nhi,#0 - umlal $nlo,$nhi,$nj,$n0 @ np[j]*n0 - adds $nlo,$nlo,$alo - str $nlo,[$tp],#4 @ tp[j-1]=,tp++ - adc $nlo,$nhi,#0 - cmp $tp,$num - bne .L1st - - adds $nlo,$nlo,$ahi - mov $nhi,#0 - adc $nhi,$nhi,#0 - ldr $tp,[$_bp] @ restore bp - str $nlo,[$num] @ tp[num-1]= - ldr $n0,[$_n0] @ restore n0 - str $nhi,[$num,#4] @ tp[num]= - -.Louter: - sub $tj,$num,sp @ "original" $num-1 value - sub $ap,$ap,$tj @ "rewind" ap to &ap[1] - sub $np,$np,$tj @ "rewind" np to &np[1] - ldr $bi,[$tp,#4]! @ *(++bp) - ldr $aj,[$ap,#-4] @ ap[0] - ldr $nj,[$np,#-4] @ np[0] - ldr $alo,[sp] @ tp[0] - ldr $tj,[sp,#4] @ tp[1] - - mov $ahi,#0 - umlal $alo,$ahi,$aj,$bi @ ap[0]*bp[i]+tp[0] - str $tp,[$_bp] @ save bp - mul $n0,$alo,$n0 - mov $nlo,#0 - umlal $alo,$nlo,$nj,$n0 @ np[0]*n0+"tp[0]" - mov $tp,sp - -.Linner: - ldr $aj,[$ap],#4 @ ap[j],ap++ - adds $alo,$ahi,$tj @ +=tp[j] - mov $ahi,#0 - umlal $alo,$ahi,$aj,$bi @ ap[j]*bp[i] - ldr $nj,[$np],#4 @ np[j],np++ - mov $nhi,#0 - umlal $nlo,$nhi,$nj,$n0 @ np[j]*n0 - ldr $tj,[$tp,#8] @ tp[j+1] - adc $ahi,$ahi,#0 - adds $nlo,$nlo,$alo - str $nlo,[$tp],#4 @ tp[j-1]=,tp++ - adc $nlo,$nhi,#0 - cmp $tp,$num - bne .Linner - - adds $nlo,$nlo,$ahi - mov $nhi,#0 - adc $nhi,$nhi,#0 - adds $nlo,$nlo,$tj - adc $nhi,$nhi,#0 - ldr $tp,[$_bp] @ restore bp - ldr $tj,[$_bpend] @ restore &bp[num] - str $nlo,[$num] @ tp[num-1]= - ldr $n0,[$_n0] @ restore n0 - str $nhi,[$num,#4] @ tp[num]= - - cmp $tp,$tj - bne .Louter - - ldr $rp,[$_rp] @ pull rp - add $num,$num,#4 @ $num to point at &tp[num] - sub $aj,$num,sp @ "original" num value - mov $tp,sp @ "rewind" $tp - mov $ap,$tp @ "borrow" $ap - sub $np,$np,$aj @ "rewind" $np to &np[0] - - subs $tj,$tj,$tj @ "clear" carry flag -.Lsub: ldr $tj,[$tp],#4 - ldr $nj,[$np],#4 - sbcs $tj,$tj,$nj @ tp[j]-np[j] - str $tj,[$rp],#4 @ rp[j]= - teq $tp,$num @ preserve carry - bne .Lsub - sbcs $nhi,$nhi,#0 @ upmost carry - mov $tp,sp @ "rewind" $tp - sub $rp,$rp,$aj @ "rewind" $rp - - and $ap,$tp,$nhi - bic $np,$rp,$nhi - orr $ap,$ap,$np @ ap=borrow?tp:rp - -.Lcopy: ldr $tj,[$ap],#4 @ copy or in-place refresh - str sp,[$tp],#4 @ zap tp - str $tj,[$rp],#4 - cmp $tp,$num - bne .Lcopy - - add sp,$num,#4 @ skip over tp[num+1] - ldmia sp!,{r4-r12,lr} @ restore registers - add sp,sp,#2*4 @ skip over {r0,r2} - mov r0,#1 -.Labrt: tst lr,#1 - moveq pc,lr @ be binary compatible with V4, yet - bx lr @ interoperable with Thumb ISA:-) -.size bn_mul_mont,.-bn_mul_mont -.asciz "Montgomery multiplication for ARMv4, CRYPTOGAMS by <appro\@openssl.org>" -.align 2 -___ - -$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm; # make it possible to compile with -march=armv4 -print $code; -close STDOUT; diff --git a/app/openssl/crypto/bn/asm/armv4-mont.s b/app/openssl/crypto/bn/asm/armv4-mont.s deleted file mode 100644 index 0488455f..00000000 --- a/app/openssl/crypto/bn/asm/armv4-mont.s +++ /dev/null @@ -1,145 +0,0 @@ -.text - -.global bn_mul_mont -.type bn_mul_mont,%function - -.align 2 -bn_mul_mont: - stmdb sp!,{r0,r2} @ sp points at argument block - ldr r0,[sp,#3*4] @ load num - cmp r0,#2 - movlt r0,#0 - addlt sp,sp,#2*4 - blt .Labrt - - stmdb sp!,{r4-r12,lr} @ save 10 registers - - mov r0,r0,lsl#2 @ rescale r0 for byte count - sub sp,sp,r0 @ alloca(4*num) - sub sp,sp,#4 @ +extra dword - sub r0,r0,#4 @ "num=num-1" - add r4,r2,r0 @ &bp[num-1] - - add r0,sp,r0 @ r0 to point at &tp[num-1] - ldr r8,[r0,#14*4] @ &n0 - ldr r2,[r2] @ bp[0] - ldr r5,[r1],#4 @ ap[0],ap++ - ldr r6,[r3],#4 @ np[0],np++ - ldr r8,[r8] @ *n0 - str r4,[r0,#15*4] @ save &bp[num] - - umull r10,r11,r5,r2 @ ap[0]*bp[0] - str r8,[r0,#14*4] @ save n0 value - mul r8,r10,r8 @ "tp[0]"*n0 - mov r12,#0 - umlal r10,r12,r6,r8 @ np[0]*n0+"t[0]" - mov r4,sp - -.L1st: - ldr r5,[r1],#4 @ ap[j],ap++ - mov r10,r11 - mov r11,#0 - umlal r10,r11,r5,r2 @ ap[j]*bp[0] - ldr r6,[r3],#4 @ np[j],np++ - mov r14,#0 - umlal r12,r14,r6,r8 @ np[j]*n0 - adds r12,r12,r10 - str r12,[r4],#4 @ tp[j-1]=,tp++ - adc r12,r14,#0 - cmp r4,r0 - bne .L1st - - adds r12,r12,r11 - mov r14,#0 - adc r14,r14,#0 - ldr r4,[r0,#13*4] @ restore bp - str r12,[r0] @ tp[num-1]= - ldr r8,[r0,#14*4] @ restore n0 - str r14,[r0,#4] @ tp[num]= - -.Louter: - sub r7,r0,sp @ "original" r0-1 value - sub r1,r1,r7 @ "rewind" ap to &ap[1] - sub r3,r3,r7 @ "rewind" np to &np[1] - ldr r2,[r4,#4]! @ *(++bp) - ldr r5,[r1,#-4] @ ap[0] - ldr r6,[r3,#-4] @ np[0] - ldr r10,[sp] @ tp[0] - ldr r7,[sp,#4] @ tp[1] - - mov r11,#0 - umlal r10,r11,r5,r2 @ ap[0]*bp[i]+tp[0] - str r4,[r0,#13*4] @ save bp - mul r8,r10,r8 - mov r12,#0 - umlal r10,r12,r6,r8 @ np[0]*n0+"tp[0]" - mov r4,sp - -.Linner: - ldr r5,[r1],#4 @ ap[j],ap++ - adds r10,r11,r7 @ +=tp[j] - mov r11,#0 - umlal r10,r11,r5,r2 @ ap[j]*bp[i] - ldr r6,[r3],#4 @ np[j],np++ - mov r14,#0 - umlal r12,r14,r6,r8 @ np[j]*n0 - ldr r7,[r4,#8] @ tp[j+1] - adc r11,r11,#0 - adds r12,r12,r10 - str r12,[r4],#4 @ tp[j-1]=,tp++ - adc r12,r14,#0 - cmp r4,r0 - bne .Linner - - adds r12,r12,r11 - mov r14,#0 - adc r14,r14,#0 - adds r12,r12,r7 - adc r14,r14,#0 - ldr r4,[r0,#13*4] @ restore bp - ldr r7,[r0,#15*4] @ restore &bp[num] - str r12,[r0] @ tp[num-1]= - ldr r8,[r0,#14*4] @ restore n0 - str r14,[r0,#4] @ tp[num]= - - cmp r4,r7 - bne .Louter - - ldr r2,[r0,#12*4] @ pull rp - add r0,r0,#4 @ r0 to point at &tp[num] - sub r5,r0,sp @ "original" num value - mov r4,sp @ "rewind" r4 - mov r1,r4 @ "borrow" r1 - sub r3,r3,r5 @ "rewind" r3 to &np[0] - - subs r7,r7,r7 @ "clear" carry flag -.Lsub: ldr r7,[r4],#4 - ldr r6,[r3],#4 - sbcs r7,r7,r6 @ tp[j]-np[j] - str r7,[r2],#4 @ rp[j]= - teq r4,r0 @ preserve carry - bne .Lsub - sbcs r14,r14,#0 @ upmost carry - mov r4,sp @ "rewind" r4 - sub r2,r2,r5 @ "rewind" r2 - - and r1,r4,r14 - bic r3,r2,r14 - orr r1,r1,r3 @ ap=borrow?tp:rp - -.Lcopy: ldr r7,[r1],#4 @ copy or in-place refresh - str sp,[r4],#4 @ zap tp - str r7,[r2],#4 - cmp r4,r0 - bne .Lcopy - - add sp,r0,#4 @ skip over tp[num+1] - ldmia sp!,{r4-r12,lr} @ restore registers - add sp,sp,#2*4 @ skip over {r0,r2} - mov r0,#1 -.Labrt: tst lr,#1 - moveq pc,lr @ be binary compatible with V4, yet - .word 0xe12fff1e @ interoperable with Thumb ISA:-) -.size bn_mul_mont,.-bn_mul_mont -.asciz "Montgomery multiplication for ARMv4, CRYPTOGAMS by <appro@openssl.org>" -.align 2 diff --git a/app/openssl/crypto/bn/asm/bn-586.pl b/app/openssl/crypto/bn/asm/bn-586.pl deleted file mode 100644 index 332ef3e9..00000000 --- a/app/openssl/crypto/bn/asm/bn-586.pl +++ /dev/null @@ -1,774 +0,0 @@ -#!/usr/local/bin/perl - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -push(@INC,"${dir}","${dir}../../perlasm"); -require "x86asm.pl"; - -&asm_init($ARGV[0],$0); - -$sse2=0; -for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); } - -&external_label("OPENSSL_ia32cap_P") if ($sse2); - -&bn_mul_add_words("bn_mul_add_words"); -&bn_mul_words("bn_mul_words"); -&bn_sqr_words("bn_sqr_words"); -&bn_div_words("bn_div_words"); -&bn_add_words("bn_add_words"); -&bn_sub_words("bn_sub_words"); -&bn_sub_part_words("bn_sub_part_words"); - -&asm_finish(); - -sub bn_mul_add_words - { - local($name)=@_; - - &function_begin_B($name,$sse2?"EXTRN\t_OPENSSL_ia32cap_P:DWORD":""); - - $r="eax"; - $a="edx"; - $c="ecx"; - - if ($sse2) { - &picmeup("eax","OPENSSL_ia32cap_P"); - &bt(&DWP(0,"eax"),26); - &jnc(&label("maw_non_sse2")); - - &mov($r,&wparam(0)); - &mov($a,&wparam(1)); - &mov($c,&wparam(2)); - &movd("mm0",&wparam(3)); # mm0 = w - &pxor("mm1","mm1"); # mm1 = carry_in - &jmp(&label("maw_sse2_entry")); - - &set_label("maw_sse2_unrolled",16); - &movd("mm3",&DWP(0,$r,"",0)); # mm3 = r[0] - &paddq("mm1","mm3"); # mm1 = carry_in + r[0] - &movd("mm2",&DWP(0,$a,"",0)); # mm2 = a[0] - &pmuludq("mm2","mm0"); # mm2 = w*a[0] - &movd("mm4",&DWP(4,$a,"",0)); # mm4 = a[1] - &pmuludq("mm4","mm0"); # mm4 = w*a[1] - &movd("mm6",&DWP(8,$a,"",0)); # mm6 = a[2] - &pmuludq("mm6","mm0"); # mm6 = w*a[2] - &movd("mm7",&DWP(12,$a,"",0)); # mm7 = a[3] - &pmuludq("mm7","mm0"); # mm7 = w*a[3] - &paddq("mm1","mm2"); # mm1 = carry_in + r[0] + w*a[0] - &movd("mm3",&DWP(4,$r,"",0)); # mm3 = r[1] - &paddq("mm3","mm4"); # mm3 = r[1] + w*a[1] - &movd("mm5",&DWP(8,$r,"",0)); # mm5 = r[2] - &paddq("mm5","mm6"); # mm5 = r[2] + w*a[2] - &movd("mm4",&DWP(12,$r,"",0)); # mm4 = r[3] - &paddq("mm7","mm4"); # mm7 = r[3] + w*a[3] - &movd(&DWP(0,$r,"",0),"mm1"); - &movd("mm2",&DWP(16,$a,"",0)); # mm2 = a[4] - &pmuludq("mm2","mm0"); # mm2 = w*a[4] - &psrlq("mm1",32); # mm1 = carry0 - &movd("mm4",&DWP(20,$a,"",0)); # mm4 = a[5] - &pmuludq("mm4","mm0"); # mm4 = w*a[5] - &paddq("mm1","mm3"); # mm1 = carry0 + r[1] + w*a[1] - &movd("mm6",&DWP(24,$a,"",0)); # mm6 = a[6] - &pmuludq("mm6","mm0"); # mm6 = w*a[6] - &movd(&DWP(4,$r,"",0),"mm1"); - &psrlq("mm1",32); # mm1 = carry1 - &movd("mm3",&DWP(28,$a,"",0)); # mm3 = a[7] - &add($a,32); - &pmuludq("mm3","mm0"); # mm3 = w*a[7] - &paddq("mm1","mm5"); # mm1 = carry1 + r[2] + w*a[2] - &movd("mm5",&DWP(16,$r,"",0)); # mm5 = r[4] - &paddq("mm2","mm5"); # mm2 = r[4] + w*a[4] - &movd(&DWP(8,$r,"",0),"mm1"); - &psrlq("mm1",32); # mm1 = carry2 - &paddq("mm1","mm7"); # mm1 = carry2 + r[3] + w*a[3] - &movd("mm5",&DWP(20,$r,"",0)); # mm5 = r[5] - &paddq("mm4","mm5"); # mm4 = r[5] + w*a[5] - &movd(&DWP(12,$r,"",0),"mm1"); - &psrlq("mm1",32); # mm1 = carry3 - &paddq("mm1","mm2"); # mm1 = carry3 + r[4] + w*a[4] - &movd("mm5",&DWP(24,$r,"",0)); # mm5 = r[6] - &paddq("mm6","mm5"); # mm6 = r[6] + w*a[6] - &movd(&DWP(16,$r,"",0),"mm1"); - &psrlq("mm1",32); # mm1 = carry4 - &paddq("mm1","mm4"); # mm1 = carry4 + r[5] + w*a[5] - &movd("mm5",&DWP(28,$r,"",0)); # mm5 = r[7] - &paddq("mm3","mm5"); # mm3 = r[7] + w*a[7] - &movd(&DWP(20,$r,"",0),"mm1"); - &psrlq("mm1",32); # mm1 = carry5 - &paddq("mm1","mm6"); # mm1 = carry5 + r[6] + w*a[6] - &movd(&DWP(24,$r,"",0),"mm1"); - &psrlq("mm1",32); # mm1 = carry6 - &paddq("mm1","mm3"); # mm1 = carry6 + r[7] + w*a[7] - &movd(&DWP(28,$r,"",0),"mm1"); - &lea($r,&DWP(32,$r)); - &psrlq("mm1",32); # mm1 = carry_out - - &sub($c,8); - &jz(&label("maw_sse2_exit")); - &set_label("maw_sse2_entry"); - &test($c,0xfffffff8); - &jnz(&label("maw_sse2_unrolled")); - - &set_label("maw_sse2_loop",4); - &movd("mm2",&DWP(0,$a)); # mm2 = a[i] - &movd("mm3",&DWP(0,$r)); # mm3 = r[i] - &pmuludq("mm2","mm0"); # a[i] *= w - &lea($a,&DWP(4,$a)); - &paddq("mm1","mm3"); # carry += r[i] - &paddq("mm1","mm2"); # carry += a[i]*w - &movd(&DWP(0,$r),"mm1"); # r[i] = carry_low - &sub($c,1); - &psrlq("mm1",32); # carry = carry_high - &lea($r,&DWP(4,$r)); - &jnz(&label("maw_sse2_loop")); - &set_label("maw_sse2_exit"); - &movd("eax","mm1"); # c = carry_out - &emms(); - &ret(); - - &set_label("maw_non_sse2",16); - } - - # function_begin prologue - &push("ebp"); - &push("ebx"); - &push("esi"); - &push("edi"); - - &comment(""); - $Low="eax"; - $High="edx"; - $a="ebx"; - $w="ebp"; - $r="edi"; - $c="esi"; - - &xor($c,$c); # clear carry - &mov($r,&wparam(0)); # - - &mov("ecx",&wparam(2)); # - &mov($a,&wparam(1)); # - - &and("ecx",0xfffffff8); # num / 8 - &mov($w,&wparam(3)); # - - &push("ecx"); # Up the stack for a tmp variable - - &jz(&label("maw_finish")); - - &set_label("maw_loop",16); - - for ($i=0; $i<32; $i+=4) - { - &comment("Round $i"); - - &mov("eax",&DWP($i,$a)); # *a - &mul($w); # *a * w - &add("eax",$c); # L(t)+= c - &adc("edx",0); # H(t)+=carry - &add("eax",&DWP($i,$r)); # L(t)+= *r - &adc("edx",0); # H(t)+=carry - &mov(&DWP($i,$r),"eax"); # *r= L(t); - &mov($c,"edx"); # c= H(t); - } - - &comment(""); - &sub("ecx",8); - &lea($a,&DWP(32,$a)); - &lea($r,&DWP(32,$r)); - &jnz(&label("maw_loop")); - - &set_label("maw_finish",0); - &mov("ecx",&wparam(2)); # get num - &and("ecx",7); - &jnz(&label("maw_finish2")); # helps branch prediction - &jmp(&label("maw_end")); - - &set_label("maw_finish2",1); - for ($i=0; $i<7; $i++) - { - &comment("Tail Round $i"); - &mov("eax",&DWP($i*4,$a)); # *a - &mul($w); # *a * w - &add("eax",$c); # L(t)+=c - &adc("edx",0); # H(t)+=carry - &add("eax",&DWP($i*4,$r)); # L(t)+= *r - &adc("edx",0); # H(t)+=carry - &dec("ecx") if ($i != 7-1); - &mov(&DWP($i*4,$r),"eax"); # *r= L(t); - &mov($c,"edx"); # c= H(t); - &jz(&label("maw_end")) if ($i != 7-1); - } - &set_label("maw_end",0); - &mov("eax",$c); - - &pop("ecx"); # clear variable from - - &function_end($name); - } - -sub bn_mul_words - { - local($name)=@_; - - &function_begin_B($name,$sse2?"EXTRN\t_OPENSSL_ia32cap_P:DWORD":""); - - $r="eax"; - $a="edx"; - $c="ecx"; - - if ($sse2) { - &picmeup("eax","OPENSSL_ia32cap_P"); - &bt(&DWP(0,"eax"),26); - &jnc(&label("mw_non_sse2")); - - &mov($r,&wparam(0)); - &mov($a,&wparam(1)); - &mov($c,&wparam(2)); - &movd("mm0",&wparam(3)); # mm0 = w - &pxor("mm1","mm1"); # mm1 = carry = 0 - - &set_label("mw_sse2_loop",16); - &movd("mm2",&DWP(0,$a)); # mm2 = a[i] - &pmuludq("mm2","mm0"); # a[i] *= w - &lea($a,&DWP(4,$a)); - &paddq("mm1","mm2"); # carry += a[i]*w - &movd(&DWP(0,$r),"mm1"); # r[i] = carry_low - &sub($c,1); - &psrlq("mm1",32); # carry = carry_high - &lea($r,&DWP(4,$r)); - &jnz(&label("mw_sse2_loop")); - - &movd("eax","mm1"); # return carry - &emms(); - &ret(); - &set_label("mw_non_sse2",16); - } - - # function_begin prologue - &push("ebp"); - &push("ebx"); - &push("esi"); - &push("edi"); - - &comment(""); - $Low="eax"; - $High="edx"; - $a="ebx"; - $w="ecx"; - $r="edi"; - $c="esi"; - $num="ebp"; - - &xor($c,$c); # clear carry - &mov($r,&wparam(0)); # - &mov($a,&wparam(1)); # - &mov($num,&wparam(2)); # - &mov($w,&wparam(3)); # - - &and($num,0xfffffff8); # num / 8 - &jz(&label("mw_finish")); - - &set_label("mw_loop",0); - for ($i=0; $i<32; $i+=4) - { - &comment("Round $i"); - - &mov("eax",&DWP($i,$a,"",0)); # *a - &mul($w); # *a * w - &add("eax",$c); # L(t)+=c - # XXX - - &adc("edx",0); # H(t)+=carry - &mov(&DWP($i,$r,"",0),"eax"); # *r= L(t); - - &mov($c,"edx"); # c= H(t); - } - - &comment(""); - &add($a,32); - &add($r,32); - &sub($num,8); - &jz(&label("mw_finish")); - &jmp(&label("mw_loop")); - - &set_label("mw_finish",0); - &mov($num,&wparam(2)); # get num - &and($num,7); - &jnz(&label("mw_finish2")); - &jmp(&label("mw_end")); - - &set_label("mw_finish2",1); - for ($i=0; $i<7; $i++) - { - &comment("Tail Round $i"); - &mov("eax",&DWP($i*4,$a,"",0));# *a - &mul($w); # *a * w - &add("eax",$c); # L(t)+=c - # XXX - &adc("edx",0); # H(t)+=carry - &mov(&DWP($i*4,$r,"",0),"eax");# *r= L(t); - &mov($c,"edx"); # c= H(t); - &dec($num) if ($i != 7-1); - &jz(&label("mw_end")) if ($i != 7-1); - } - &set_label("mw_end",0); - &mov("eax",$c); - - &function_end($name); - } - -sub bn_sqr_words - { - local($name)=@_; - - &function_begin_B($name,$sse2?"EXTRN\t_OPENSSL_ia32cap_P:DWORD":""); - - $r="eax"; - $a="edx"; - $c="ecx"; - - if ($sse2) { - &picmeup("eax","OPENSSL_ia32cap_P"); - &bt(&DWP(0,"eax"),26); - &jnc(&label("sqr_non_sse2")); - - &mov($r,&wparam(0)); - &mov($a,&wparam(1)); - &mov($c,&wparam(2)); - - &set_label("sqr_sse2_loop",16); - &movd("mm0",&DWP(0,$a)); # mm0 = a[i] - &pmuludq("mm0","mm0"); # a[i] *= a[i] - &lea($a,&DWP(4,$a)); # a++ - &movq(&QWP(0,$r),"mm0"); # r[i] = a[i]*a[i] - &sub($c,1); - &lea($r,&DWP(8,$r)); # r += 2 - &jnz(&label("sqr_sse2_loop")); - - &emms(); - &ret(); - &set_label("sqr_non_sse2",16); - } - - # function_begin prologue - &push("ebp"); - &push("ebx"); - &push("esi"); - &push("edi"); - - &comment(""); - $r="esi"; - $a="edi"; - $num="ebx"; - - &mov($r,&wparam(0)); # - &mov($a,&wparam(1)); # - &mov($num,&wparam(2)); # - - &and($num,0xfffffff8); # num / 8 - &jz(&label("sw_finish")); - - &set_label("sw_loop",0); - for ($i=0; $i<32; $i+=4) - { - &comment("Round $i"); - &mov("eax",&DWP($i,$a,"",0)); # *a - # XXX - &mul("eax"); # *a * *a - &mov(&DWP($i*2,$r,"",0),"eax"); # - &mov(&DWP($i*2+4,$r,"",0),"edx");# - } - - &comment(""); - &add($a,32); - &add($r,64); - &sub($num,8); - &jnz(&label("sw_loop")); - - &set_label("sw_finish",0); - &mov($num,&wparam(2)); # get num - &and($num,7); - &jz(&label("sw_end")); - - for ($i=0; $i<7; $i++) - { - &comment("Tail Round $i"); - &mov("eax",&DWP($i*4,$a,"",0)); # *a - # XXX - &mul("eax"); # *a * *a - &mov(&DWP($i*8,$r,"",0),"eax"); # - &dec($num) if ($i != 7-1); - &mov(&DWP($i*8+4,$r,"",0),"edx"); - &jz(&label("sw_end")) if ($i != 7-1); - } - &set_label("sw_end",0); - - &function_end($name); - } - -sub bn_div_words - { - local($name)=@_; - - &function_begin_B($name,""); - &mov("edx",&wparam(0)); # - &mov("eax",&wparam(1)); # - &mov("ecx",&wparam(2)); # - &div("ecx"); - &ret(); - &function_end_B($name); - } - -sub bn_add_words - { - local($name)=@_; - - &function_begin($name,""); - - &comment(""); - $a="esi"; - $b="edi"; - $c="eax"; - $r="ebx"; - $tmp1="ecx"; - $tmp2="edx"; - $num="ebp"; - - &mov($r,&wparam(0)); # get r - &mov($a,&wparam(1)); # get a - &mov($b,&wparam(2)); # get b - &mov($num,&wparam(3)); # get num - &xor($c,$c); # clear carry - &and($num,0xfffffff8); # num / 8 - - &jz(&label("aw_finish")); - - &set_label("aw_loop",0); - for ($i=0; $i<8; $i++) - { - &comment("Round $i"); - - &mov($tmp1,&DWP($i*4,$a,"",0)); # *a - &mov($tmp2,&DWP($i*4,$b,"",0)); # *b - &add($tmp1,$c); - &mov($c,0); - &adc($c,$c); - &add($tmp1,$tmp2); - &adc($c,0); - &mov(&DWP($i*4,$r,"",0),$tmp1); # *r - } - - &comment(""); - &add($a,32); - &add($b,32); - &add($r,32); - &sub($num,8); - &jnz(&label("aw_loop")); - - &set_label("aw_finish",0); - &mov($num,&wparam(3)); # get num - &and($num,7); - &jz(&label("aw_end")); - - for ($i=0; $i<7; $i++) - { - &comment("Tail Round $i"); - &mov($tmp1,&DWP($i*4,$a,"",0)); # *a - &mov($tmp2,&DWP($i*4,$b,"",0));# *b - &add($tmp1,$c); - &mov($c,0); - &adc($c,$c); - &add($tmp1,$tmp2); - &adc($c,0); - &dec($num) if ($i != 6); - &mov(&DWP($i*4,$r,"",0),$tmp1); # *r - &jz(&label("aw_end")) if ($i != 6); - } - &set_label("aw_end",0); - -# &mov("eax",$c); # $c is "eax" - - &function_end($name); - } - -sub bn_sub_words - { - local($name)=@_; - - &function_begin($name,""); - - &comment(""); - $a="esi"; - $b="edi"; - $c="eax"; - $r="ebx"; - $tmp1="ecx"; - $tmp2="edx"; - $num="ebp"; - - &mov($r,&wparam(0)); # get r - &mov($a,&wparam(1)); # get a - &mov($b,&wparam(2)); # get b - &mov($num,&wparam(3)); # get num - &xor($c,$c); # clear carry - &and($num,0xfffffff8); # num / 8 - - &jz(&label("aw_finish")); - - &set_label("aw_loop",0); - for ($i=0; $i<8; $i++) - { - &comment("Round $i"); - - &mov($tmp1,&DWP($i*4,$a,"",0)); # *a - &mov($tmp2,&DWP($i*4,$b,"",0)); # *b - &sub($tmp1,$c); - &mov($c,0); - &adc($c,$c); - &sub($tmp1,$tmp2); - &adc($c,0); - &mov(&DWP($i*4,$r,"",0),$tmp1); # *r - } - - &comment(""); - &add($a,32); - &add($b,32); - &add($r,32); - &sub($num,8); - &jnz(&label("aw_loop")); - - &set_label("aw_finish",0); - &mov($num,&wparam(3)); # get num - &and($num,7); - &jz(&label("aw_end")); - - for ($i=0; $i<7; $i++) - { - &comment("Tail Round $i"); - &mov($tmp1,&DWP($i*4,$a,"",0)); # *a - &mov($tmp2,&DWP($i*4,$b,"",0));# *b - &sub($tmp1,$c); - &mov($c,0); - &adc($c,$c); - &sub($tmp1,$tmp2); - &adc($c,0); - &dec($num) if ($i != 6); - &mov(&DWP($i*4,$r,"",0),$tmp1); # *r - &jz(&label("aw_end")) if ($i != 6); - } - &set_label("aw_end",0); - -# &mov("eax",$c); # $c is "eax" - - &function_end($name); - } - -sub bn_sub_part_words - { - local($name)=@_; - - &function_begin($name,""); - - &comment(""); - $a="esi"; - $b="edi"; - $c="eax"; - $r="ebx"; - $tmp1="ecx"; - $tmp2="edx"; - $num="ebp"; - - &mov($r,&wparam(0)); # get r - &mov($a,&wparam(1)); # get a - &mov($b,&wparam(2)); # get b - &mov($num,&wparam(3)); # get num - &xor($c,$c); # clear carry - &and($num,0xfffffff8); # num / 8 - - &jz(&label("aw_finish")); - - &set_label("aw_loop",0); - for ($i=0; $i<8; $i++) - { - &comment("Round $i"); - - &mov($tmp1,&DWP($i*4,$a,"",0)); # *a - &mov($tmp2,&DWP($i*4,$b,"",0)); # *b - &sub($tmp1,$c); - &mov($c,0); - &adc($c,$c); - &sub($tmp1,$tmp2); - &adc($c,0); - &mov(&DWP($i*4,$r,"",0),$tmp1); # *r - } - - &comment(""); - &add($a,32); - &add($b,32); - &add($r,32); - &sub($num,8); - &jnz(&label("aw_loop")); - - &set_label("aw_finish",0); - &mov($num,&wparam(3)); # get num - &and($num,7); - &jz(&label("aw_end")); - - for ($i=0; $i<7; $i++) - { - &comment("Tail Round $i"); - &mov($tmp1,&DWP(0,$a,"",0)); # *a - &mov($tmp2,&DWP(0,$b,"",0));# *b - &sub($tmp1,$c); - &mov($c,0); - &adc($c,$c); - &sub($tmp1,$tmp2); - &adc($c,0); - &mov(&DWP(0,$r,"",0),$tmp1); # *r - &add($a, 4); - &add($b, 4); - &add($r, 4); - &dec($num) if ($i != 6); - &jz(&label("aw_end")) if ($i != 6); - } - &set_label("aw_end",0); - - &cmp(&wparam(4),0); - &je(&label("pw_end")); - - &mov($num,&wparam(4)); # get dl - &cmp($num,0); - &je(&label("pw_end")); - &jge(&label("pw_pos")); - - &comment("pw_neg"); - &mov($tmp2,0); - &sub($tmp2,$num); - &mov($num,$tmp2); - &and($num,0xfffffff8); # num / 8 - &jz(&label("pw_neg_finish")); - - &set_label("pw_neg_loop",0); - for ($i=0; $i<8; $i++) - { - &comment("dl<0 Round $i"); - - &mov($tmp1,0); - &mov($tmp2,&DWP($i*4,$b,"",0)); # *b - &sub($tmp1,$c); - &mov($c,0); - &adc($c,$c); - &sub($tmp1,$tmp2); - &adc($c,0); - &mov(&DWP($i*4,$r,"",0),$tmp1); # *r - } - - &comment(""); - &add($b,32); - &add($r,32); - &sub($num,8); - &jnz(&label("pw_neg_loop")); - - &set_label("pw_neg_finish",0); - &mov($tmp2,&wparam(4)); # get dl - &mov($num,0); - &sub($num,$tmp2); - &and($num,7); - &jz(&label("pw_end")); - - for ($i=0; $i<7; $i++) - { - &comment("dl<0 Tail Round $i"); - &mov($tmp1,0); - &mov($tmp2,&DWP($i*4,$b,"",0));# *b - &sub($tmp1,$c); - &mov($c,0); - &adc($c,$c); - &sub($tmp1,$tmp2); - &adc($c,0); - &dec($num) if ($i != 6); - &mov(&DWP($i*4,$r,"",0),$tmp1); # *r - &jz(&label("pw_end")) if ($i != 6); - } - - &jmp(&label("pw_end")); - - &set_label("pw_pos",0); - - &and($num,0xfffffff8); # num / 8 - &jz(&label("pw_pos_finish")); - - &set_label("pw_pos_loop",0); - - for ($i=0; $i<8; $i++) - { - &comment("dl>0 Round $i"); - - &mov($tmp1,&DWP($i*4,$a,"",0)); # *a - &sub($tmp1,$c); - &mov(&DWP($i*4,$r,"",0),$tmp1); # *r - &jnc(&label("pw_nc".$i)); - } - - &comment(""); - &add($a,32); - &add($r,32); - &sub($num,8); - &jnz(&label("pw_pos_loop")); - - &set_label("pw_pos_finish",0); - &mov($num,&wparam(4)); # get dl - &and($num,7); - &jz(&label("pw_end")); - - for ($i=0; $i<7; $i++) - { - &comment("dl>0 Tail Round $i"); - &mov($tmp1,&DWP($i*4,$a,"",0)); # *a - &sub($tmp1,$c); - &mov(&DWP($i*4,$r,"",0),$tmp1); # *r - &jnc(&label("pw_tail_nc".$i)); - &dec($num) if ($i != 6); - &jz(&label("pw_end")) if ($i != 6); - } - &mov($c,1); - &jmp(&label("pw_end")); - - &set_label("pw_nc_loop",0); - for ($i=0; $i<8; $i++) - { - &mov($tmp1,&DWP($i*4,$a,"",0)); # *a - &mov(&DWP($i*4,$r,"",0),$tmp1); # *r - &set_label("pw_nc".$i,0); - } - - &comment(""); - &add($a,32); - &add($r,32); - &sub($num,8); - &jnz(&label("pw_nc_loop")); - - &mov($num,&wparam(4)); # get dl - &and($num,7); - &jz(&label("pw_nc_end")); - - for ($i=0; $i<7; $i++) - { - &mov($tmp1,&DWP($i*4,$a,"",0)); # *a - &mov(&DWP($i*4,$r,"",0),$tmp1); # *r - &set_label("pw_tail_nc".$i,0); - &dec($num) if ($i != 6); - &jz(&label("pw_nc_end")) if ($i != 6); - } - - &set_label("pw_nc_end",0); - &mov($c,0); - - &set_label("pw_end",0); - -# &mov("eax",$c); # $c is "eax" - - &function_end($name); - } - diff --git a/app/openssl/crypto/bn/asm/co-586.pl b/app/openssl/crypto/bn/asm/co-586.pl deleted file mode 100644 index 57101a6b..00000000 --- a/app/openssl/crypto/bn/asm/co-586.pl +++ /dev/null @@ -1,287 +0,0 @@ -#!/usr/local/bin/perl - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -push(@INC,"${dir}","${dir}../../perlasm"); -require "x86asm.pl"; - -&asm_init($ARGV[0],$0); - -&bn_mul_comba("bn_mul_comba8",8); -&bn_mul_comba("bn_mul_comba4",4); -&bn_sqr_comba("bn_sqr_comba8",8); -&bn_sqr_comba("bn_sqr_comba4",4); - -&asm_finish(); - -sub mul_add_c - { - local($a,$ai,$b,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_; - - # pos == -1 if eax and edx are pre-loaded, 0 to load from next - # words, and 1 if load return value - - &comment("mul a[$ai]*b[$bi]"); - - # "eax" and "edx" will always be pre-loaded. - # &mov("eax",&DWP($ai*4,$a,"",0)) ; - # &mov("edx",&DWP($bi*4,$b,"",0)); - - &mul("edx"); - &add($c0,"eax"); - &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0; # laod next a - &mov("eax",&wparam(0)) if $pos > 0; # load r[] - ### - &adc($c1,"edx"); - &mov("edx",&DWP(($nb)*4,$b,"",0)) if $pos == 0; # laod next b - &mov("edx",&DWP(($nb)*4,$b,"",0)) if $pos == 1; # laod next b - ### - &adc($c2,0); - # is pos > 1, it means it is the last loop - &mov(&DWP($i*4,"eax","",0),$c0) if $pos > 0; # save r[]; - &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1; # laod next a - } - -sub sqr_add_c - { - local($r,$a,$ai,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_; - - # pos == -1 if eax and edx are pre-loaded, 0 to load from next - # words, and 1 if load return value - - &comment("sqr a[$ai]*a[$bi]"); - - # "eax" and "edx" will always be pre-loaded. - # &mov("eax",&DWP($ai*4,$a,"",0)) ; - # &mov("edx",&DWP($bi*4,$b,"",0)); - - if ($ai == $bi) - { &mul("eax");} - else - { &mul("edx");} - &add($c0,"eax"); - &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0; # load next a - ### - &adc($c1,"edx"); - &mov("edx",&DWP(($nb)*4,$a,"",0)) if ($pos == 1) && ($na != $nb); - ### - &adc($c2,0); - # is pos > 1, it means it is the last loop - &mov(&DWP($i*4,$r,"",0),$c0) if $pos > 0; # save r[]; - &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1; # load next b - } - -sub sqr_add_c2 - { - local($r,$a,$ai,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_; - - # pos == -1 if eax and edx are pre-loaded, 0 to load from next - # words, and 1 if load return value - - &comment("sqr a[$ai]*a[$bi]"); - - # "eax" and "edx" will always be pre-loaded. - # &mov("eax",&DWP($ai*4,$a,"",0)) ; - # &mov("edx",&DWP($bi*4,$a,"",0)); - - if ($ai == $bi) - { &mul("eax");} - else - { &mul("edx");} - &add("eax","eax"); - ### - &adc("edx","edx"); - ### - &adc($c2,0); - &add($c0,"eax"); - &adc($c1,"edx"); - &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0; # load next a - &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1; # load next b - &adc($c2,0); - &mov(&DWP($i*4,$r,"",0),$c0) if $pos > 0; # save r[]; - &mov("edx",&DWP(($nb)*4,$a,"",0)) if ($pos <= 1) && ($na != $nb); - ### - } - -sub bn_mul_comba - { - local($name,$num)=@_; - local($a,$b,$c0,$c1,$c2); - local($i,$as,$ae,$bs,$be,$ai,$bi); - local($tot,$end); - - &function_begin_B($name,""); - - $c0="ebx"; - $c1="ecx"; - $c2="ebp"; - $a="esi"; - $b="edi"; - - $as=0; - $ae=0; - $bs=0; - $be=0; - $tot=$num+$num-1; - - &push("esi"); - &mov($a,&wparam(1)); - &push("edi"); - &mov($b,&wparam(2)); - &push("ebp"); - &push("ebx"); - - &xor($c0,$c0); - &mov("eax",&DWP(0,$a,"",0)); # load the first word - &xor($c1,$c1); - &mov("edx",&DWP(0,$b,"",0)); # load the first second - - for ($i=0; $i<$tot; $i++) - { - $ai=$as; - $bi=$bs; - $end=$be+1; - - &comment("################## Calculate word $i"); - - for ($j=$bs; $j<$end; $j++) - { - &xor($c2,$c2) if ($j == $bs); - if (($j+1) == $end) - { - $v=1; - $v=2 if (($i+1) == $tot); - } - else - { $v=0; } - if (($j+1) != $end) - { - $na=($ai-1); - $nb=($bi+1); - } - else - { - $na=$as+($i < ($num-1)); - $nb=$bs+($i >= ($num-1)); - } -#printf STDERR "[$ai,$bi] -> [$na,$nb]\n"; - &mul_add_c($a,$ai,$b,$bi,$c0,$c1,$c2,$v,$i,$na,$nb); - if ($v) - { - &comment("saved r[$i]"); - # &mov("eax",&wparam(0)); - # &mov(&DWP($i*4,"eax","",0),$c0); - ($c0,$c1,$c2)=($c1,$c2,$c0); - } - $ai--; - $bi++; - } - $as++ if ($i < ($num-1)); - $ae++ if ($i >= ($num-1)); - - $bs++ if ($i >= ($num-1)); - $be++ if ($i < ($num-1)); - } - &comment("save r[$i]"); - # &mov("eax",&wparam(0)); - &mov(&DWP($i*4,"eax","",0),$c0); - - &pop("ebx"); - &pop("ebp"); - &pop("edi"); - &pop("esi"); - &ret(); - &function_end_B($name); - } - -sub bn_sqr_comba - { - local($name,$num)=@_; - local($r,$a,$c0,$c1,$c2)=@_; - local($i,$as,$ae,$bs,$be,$ai,$bi); - local($b,$tot,$end,$half); - - &function_begin_B($name,""); - - $c0="ebx"; - $c1="ecx"; - $c2="ebp"; - $a="esi"; - $r="edi"; - - &push("esi"); - &push("edi"); - &push("ebp"); - &push("ebx"); - &mov($r,&wparam(0)); - &mov($a,&wparam(1)); - &xor($c0,$c0); - &xor($c1,$c1); - &mov("eax",&DWP(0,$a,"",0)); # load the first word - - $as=0; - $ae=0; - $bs=0; - $be=0; - $tot=$num+$num-1; - - for ($i=0; $i<$tot; $i++) - { - $ai=$as; - $bi=$bs; - $end=$be+1; - - &comment("############### Calculate word $i"); - for ($j=$bs; $j<$end; $j++) - { - &xor($c2,$c2) if ($j == $bs); - if (($ai-1) < ($bi+1)) - { - $v=1; - $v=2 if ($i+1) == $tot; - } - else - { $v=0; } - if (!$v) - { - $na=$ai-1; - $nb=$bi+1; - } - else - { - $na=$as+($i < ($num-1)); - $nb=$bs+($i >= ($num-1)); - } - if ($ai == $bi) - { - &sqr_add_c($r,$a,$ai,$bi, - $c0,$c1,$c2,$v,$i,$na,$nb); - } - else - { - &sqr_add_c2($r,$a,$ai,$bi, - $c0,$c1,$c2,$v,$i,$na,$nb); - } - if ($v) - { - &comment("saved r[$i]"); - #&mov(&DWP($i*4,$r,"",0),$c0); - ($c0,$c1,$c2)=($c1,$c2,$c0); - last; - } - $ai--; - $bi++; - } - $as++ if ($i < ($num-1)); - $ae++ if ($i >= ($num-1)); - - $bs++ if ($i >= ($num-1)); - $be++ if ($i < ($num-1)); - } - &mov(&DWP($i*4,$r,"",0),$c0); - &pop("ebx"); - &pop("ebp"); - &pop("edi"); - &pop("esi"); - &ret(); - &function_end_B($name); - } diff --git a/app/openssl/crypto/bn/asm/ia64.S b/app/openssl/crypto/bn/asm/ia64.S deleted file mode 100644 index 951abc53..00000000 --- a/app/openssl/crypto/bn/asm/ia64.S +++ /dev/null @@ -1,1555 +0,0 @@ -.explicit -.text -.ident "ia64.S, Version 2.1" -.ident "IA-64 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>" - -// -// ==================================================================== -// Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -// project. -// -// Rights for redistribution and usage in source and binary forms are -// granted according to the OpenSSL license. Warranty of any kind is -// disclaimed. -// ==================================================================== -// -// Version 2.x is Itanium2 re-tune. Few words about how Itanum2 is -// different from Itanium to this module viewpoint. Most notably, is it -// "wider" than Itanium? Can you experience loop scalability as -// discussed in commentary sections? Not really:-( Itanium2 has 6 -// integer ALU ports, i.e. it's 2 ports wider, but it's not enough to -// spin twice as fast, as I need 8 IALU ports. Amount of floating point -// ports is the same, i.e. 2, while I need 4. In other words, to this -// module Itanium2 remains effectively as "wide" as Itanium. Yet it's -// essentially different in respect to this module, and a re-tune was -// required. Well, because some intruction latencies has changed. Most -// noticeably those intensively used: -// -// Itanium Itanium2 -// ldf8 9 6 L2 hit -// ld8 2 1 L1 hit -// getf 2 5 -// xma[->getf] 7[+1] 4[+0] -// add[->st8] 1[+1] 1[+0] -// -// What does it mean? You might ratiocinate that the original code -// should run just faster... Because sum of latencies is smaller... -// Wrong! Note that getf latency increased. This means that if a loop is -// scheduled for lower latency (as they were), then it will suffer from -// stall condition and the code will therefore turn anti-scalable, e.g. -// original bn_mul_words spun at 5*n or 2.5 times slower than expected -// on Itanium2! What to do? Reschedule loops for Itanium2? But then -// Itanium would exhibit anti-scalability. So I've chosen to reschedule -// for worst latency for every instruction aiming for best *all-round* -// performance. - -// Q. How much faster does it get? -// A. Here is the output from 'openssl speed rsa dsa' for vanilla -// 0.9.6a compiled with gcc version 2.96 20000731 (Red Hat -// Linux 7.1 2.96-81): -// -// sign verify sign/s verify/s -// rsa 512 bits 0.0036s 0.0003s 275.3 2999.2 -// rsa 1024 bits 0.0203s 0.0011s 49.3 894.1 -// rsa 2048 bits 0.1331s 0.0040s 7.5 250.9 -// rsa 4096 bits 0.9270s 0.0147s 1.1 68.1 -// sign verify sign/s verify/s -// dsa 512 bits 0.0035s 0.0043s 288.3 234.8 -// dsa 1024 bits 0.0111s 0.0135s 90.0 74.2 -// -// And here is similar output but for this assembler -// implementation:-) -// -// sign verify sign/s verify/s -// rsa 512 bits 0.0021s 0.0001s 549.4 9638.5 -// rsa 1024 bits 0.0055s 0.0002s 183.8 4481.1 -// rsa 2048 bits 0.0244s 0.0006s 41.4 1726.3 -// rsa 4096 bits 0.1295s 0.0018s 7.7 561.5 -// sign verify sign/s verify/s -// dsa 512 bits 0.0012s 0.0013s 891.9 756.6 -// dsa 1024 bits 0.0023s 0.0028s 440.4 376.2 -// -// Yes, you may argue that it's not fair comparison as it's -// possible to craft the C implementation with BN_UMULT_HIGH -// inline assembler macro. But of course! Here is the output -// with the macro: -// -// sign verify sign/s verify/s -// rsa 512 bits 0.0020s 0.0002s 495.0 6561.0 -// rsa 1024 bits 0.0086s 0.0004s 116.2 2235.7 -// rsa 2048 bits 0.0519s 0.0015s 19.3 667.3 -// rsa 4096 bits 0.3464s 0.0053s 2.9 187.7 -// sign verify sign/s verify/s -// dsa 512 bits 0.0016s 0.0020s 613.1 510.5 -// dsa 1024 bits 0.0045s 0.0054s 221.0 183.9 -// -// My code is still way faster, huh:-) And I believe that even -// higher performance can be achieved. Note that as keys get -// longer, performance gain is larger. Why? According to the -// profiler there is another player in the field, namely -// BN_from_montgomery consuming larger and larger portion of CPU -// time as keysize decreases. I therefore consider putting effort -// to assembler implementation of the following routine: -// -// void bn_mul_add_mont (BN_ULONG *rp,BN_ULONG *np,int nl,BN_ULONG n0) -// { -// int i,j; -// BN_ULONG v; -// -// for (i=0; i<nl; i++) -// { -// v=bn_mul_add_words(rp,np,nl,(rp[0]*n0)&BN_MASK2); -// nrp++; -// rp++; -// if (((nrp[-1]+=v)&BN_MASK2) < v) -// for (j=0; ((++nrp[j])&BN_MASK2) == 0; j++) ; -// } -// } -// -// It might as well be beneficial to implement even combaX -// variants, as it appears as it can literally unleash the -// performance (see comment section to bn_mul_comba8 below). -// -// And finally for your reference the output for 0.9.6a compiled -// with SGIcc version 0.01.0-12 (keep in mind that for the moment -// of this writing it's not possible to convince SGIcc to use -// BN_UMULT_HIGH inline assembler macro, yet the code is fast, -// i.e. for a compiler generated one:-): -// -// sign verify sign/s verify/s -// rsa 512 bits 0.0022s 0.0002s 452.7 5894.3 -// rsa 1024 bits 0.0097s 0.0005s 102.7 2002.9 -// rsa 2048 bits 0.0578s 0.0017s 17.3 600.2 -// rsa 4096 bits 0.3838s 0.0061s 2.6 164.5 -// sign verify sign/s verify/s -// dsa 512 bits 0.0018s 0.0022s 547.3 459.6 -// dsa 1024 bits 0.0051s 0.0062s 196.6 161.3 -// -// Oh! Benchmarks were performed on 733MHz Lion-class Itanium -// system running Redhat Linux 7.1 (very special thanks to Ray -// McCaffity of Williams Communications for providing an account). -// -// Q. What's the heck with 'rum 1<<5' at the end of every function? -// A. Well, by clearing the "upper FP registers written" bit of the -// User Mask I want to excuse the kernel from preserving upper -// (f32-f128) FP register bank over process context switch, thus -// minimizing bus bandwidth consumption during the switch (i.e. -// after PKI opration completes and the program is off doing -// something else like bulk symmetric encryption). Having said -// this, I also want to point out that it might be good idea -// to compile the whole toolkit (as well as majority of the -// programs for that matter) with -mfixed-range=f32-f127 command -// line option. No, it doesn't prevent the compiler from writing -// to upper bank, but at least discourages to do so. If you don't -// like the idea you have the option to compile the module with -// -Drum=nop.m in command line. -// - -#if defined(_HPUX_SOURCE) && !defined(_LP64) -#define ADDP addp4 -#else -#define ADDP add -#endif - -#if 1 -// -// bn_[add|sub]_words routines. -// -// Loops are spinning in 2*(n+5) ticks on Itanuim (provided that the -// data reside in L1 cache, i.e. 2 ticks away). It's possible to -// compress the epilogue and get down to 2*n+6, but at the cost of -// scalability (the neat feature of this implementation is that it -// shall automagically spin in n+5 on "wider" IA-64 implementations:-) -// I consider that the epilogue is short enough as it is to trade tiny -// performance loss on Itanium for scalability. -// -// BN_ULONG bn_add_words(BN_ULONG *rp, BN_ULONG *ap, BN_ULONG *bp,int num) -// -.global bn_add_words# -.proc bn_add_words# -.align 64 -.skip 32 // makes the loop body aligned at 64-byte boundary -bn_add_words: - .prologue - .save ar.pfs,r2 -{ .mii; alloc r2=ar.pfs,4,12,0,16 - cmp4.le p6,p0=r35,r0 };; -{ .mfb; mov r8=r0 // return value -(p6) br.ret.spnt.many b0 };; - -{ .mib; sub r10=r35,r0,1 - .save ar.lc,r3 - mov r3=ar.lc - brp.loop.imp .L_bn_add_words_ctop,.L_bn_add_words_cend-16 - } -{ .mib; ADDP r14=0,r32 // rp - .save pr,r9 - mov r9=pr };; - .body -{ .mii; ADDP r15=0,r33 // ap - mov ar.lc=r10 - mov ar.ec=6 } -{ .mib; ADDP r16=0,r34 // bp - mov pr.rot=1<<16 };; - -.L_bn_add_words_ctop: -{ .mii; (p16) ld8 r32=[r16],8 // b=*(bp++) - (p18) add r39=r37,r34 - (p19) cmp.ltu.unc p56,p0=r40,r38 } -{ .mfb; (p0) nop.m 0x0 - (p0) nop.f 0x0 - (p0) nop.b 0x0 } -{ .mii; (p16) ld8 r35=[r15],8 // a=*(ap++) - (p58) cmp.eq.or p57,p0=-1,r41 // (p20) - (p58) add r41=1,r41 } // (p20) -{ .mfb; (p21) st8 [r14]=r42,8 // *(rp++)=r - (p0) nop.f 0x0 - br.ctop.sptk .L_bn_add_words_ctop };; -.L_bn_add_words_cend: - -{ .mii; -(p59) add r8=1,r8 // return value - mov pr=r9,0x1ffff - mov ar.lc=r3 } -{ .mbb; nop.b 0x0 - br.ret.sptk.many b0 };; -.endp bn_add_words# - -// -// BN_ULONG bn_sub_words(BN_ULONG *rp, BN_ULONG *ap, BN_ULONG *bp,int num) -// -.global bn_sub_words# -.proc bn_sub_words# -.align 64 -.skip 32 // makes the loop body aligned at 64-byte boundary -bn_sub_words: - .prologue - .save ar.pfs,r2 -{ .mii; alloc r2=ar.pfs,4,12,0,16 - cmp4.le p6,p0=r35,r0 };; -{ .mfb; mov r8=r0 // return value -(p6) br.ret.spnt.many b0 };; - -{ .mib; sub r10=r35,r0,1 - .save ar.lc,r3 - mov r3=ar.lc - brp.loop.imp .L_bn_sub_words_ctop,.L_bn_sub_words_cend-16 - } -{ .mib; ADDP r14=0,r32 // rp - .save pr,r9 - mov r9=pr };; - .body -{ .mii; ADDP r15=0,r33 // ap - mov ar.lc=r10 - mov ar.ec=6 } -{ .mib; ADDP r16=0,r34 // bp - mov pr.rot=1<<16 };; - -.L_bn_sub_words_ctop: -{ .mii; (p16) ld8 r32=[r16],8 // b=*(bp++) - (p18) sub r39=r37,r34 - (p19) cmp.gtu.unc p56,p0=r40,r38 } -{ .mfb; (p0) nop.m 0x0 - (p0) nop.f 0x0 - (p0) nop.b 0x0 } -{ .mii; (p16) ld8 r35=[r15],8 // a=*(ap++) - (p58) cmp.eq.or p57,p0=0,r41 // (p20) - (p58) add r41=-1,r41 } // (p20) -{ .mbb; (p21) st8 [r14]=r42,8 // *(rp++)=r - (p0) nop.b 0x0 - br.ctop.sptk .L_bn_sub_words_ctop };; -.L_bn_sub_words_cend: - -{ .mii; -(p59) add r8=1,r8 // return value - mov pr=r9,0x1ffff - mov ar.lc=r3 } -{ .mbb; nop.b 0x0 - br.ret.sptk.many b0 };; -.endp bn_sub_words# -#endif - -#if 0 -#define XMA_TEMPTATION -#endif - -#if 1 -// -// BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w) -// -.global bn_mul_words# -.proc bn_mul_words# -.align 64 -.skip 32 // makes the loop body aligned at 64-byte boundary -bn_mul_words: - .prologue - .save ar.pfs,r2 -#ifdef XMA_TEMPTATION -{ .mfi; alloc r2=ar.pfs,4,0,0,0 };; -#else -{ .mfi; alloc r2=ar.pfs,4,12,0,16 };; -#endif -{ .mib; mov r8=r0 // return value - cmp4.le p6,p0=r34,r0 -(p6) br.ret.spnt.many b0 };; - -{ .mii; sub r10=r34,r0,1 - .save ar.lc,r3 - mov r3=ar.lc - .save pr,r9 - mov r9=pr };; - - .body -{ .mib; setf.sig f8=r35 // w - mov pr.rot=0x800001<<16 - // ------^----- serves as (p50) at first (p27) - brp.loop.imp .L_bn_mul_words_ctop,.L_bn_mul_words_cend-16 - } - -#ifndef XMA_TEMPTATION - -{ .mmi; ADDP r14=0,r32 // rp - ADDP r15=0,r33 // ap - mov ar.lc=r10 } -{ .mmi; mov r40=0 // serves as r35 at first (p27) - mov ar.ec=13 };; - -// This loop spins in 2*(n+12) ticks. It's scheduled for data in Itanium -// L2 cache (i.e. 9 ticks away) as floating point load/store instructions -// bypass L1 cache and L2 latency is actually best-case scenario for -// ldf8. The loop is not scalable and shall run in 2*(n+12) even on -// "wider" IA-64 implementations. It's a trade-off here. n+24 loop -// would give us ~5% in *overall* performance improvement on "wider" -// IA-64, but would hurt Itanium for about same because of longer -// epilogue. As it's a matter of few percents in either case I've -// chosen to trade the scalability for development time (you can see -// this very instruction sequence in bn_mul_add_words loop which in -// turn is scalable). -.L_bn_mul_words_ctop: -{ .mfi; (p25) getf.sig r36=f52 // low - (p21) xmpy.lu f48=f37,f8 - (p28) cmp.ltu p54,p50=r41,r39 } -{ .mfi; (p16) ldf8 f32=[r15],8 - (p21) xmpy.hu f40=f37,f8 - (p0) nop.i 0x0 };; -{ .mii; (p25) getf.sig r32=f44 // high - .pred.rel "mutex",p50,p54 - (p50) add r40=r38,r35 // (p27) - (p54) add r40=r38,r35,1 } // (p27) -{ .mfb; (p28) st8 [r14]=r41,8 - (p0) nop.f 0x0 - br.ctop.sptk .L_bn_mul_words_ctop };; -.L_bn_mul_words_cend: - -{ .mii; nop.m 0x0 -.pred.rel "mutex",p51,p55 -(p51) add r8=r36,r0 -(p55) add r8=r36,r0,1 } -{ .mfb; nop.m 0x0 - nop.f 0x0 - nop.b 0x0 } - -#else // XMA_TEMPTATION - - setf.sig f37=r0 // serves as carry at (p18) tick - mov ar.lc=r10 - mov ar.ec=5;; - -// Most of you examining this code very likely wonder why in the name -// of Intel the following loop is commented out? Indeed, it looks so -// neat that you find it hard to believe that it's something wrong -// with it, right? The catch is that every iteration depends on the -// result from previous one and the latter isn't available instantly. -// The loop therefore spins at the latency of xma minus 1, or in other -// words at 6*(n+4) ticks:-( Compare to the "production" loop above -// that runs in 2*(n+11) where the low latency problem is worked around -// by moving the dependency to one-tick latent interger ALU. Note that -// "distance" between ldf8 and xma is not latency of ldf8, but the -// *difference* between xma and ldf8 latencies. -.L_bn_mul_words_ctop: -{ .mfi; (p16) ldf8 f32=[r33],8 - (p18) xma.hu f38=f34,f8,f39 } -{ .mfb; (p20) stf8 [r32]=f37,8 - (p18) xma.lu f35=f34,f8,f39 - br.ctop.sptk .L_bn_mul_words_ctop };; -.L_bn_mul_words_cend: - - getf.sig r8=f41 // the return value - -#endif // XMA_TEMPTATION - -{ .mii; nop.m 0x0 - mov pr=r9,0x1ffff - mov ar.lc=r3 } -{ .mfb; rum 1<<5 // clear um.mfh - nop.f 0x0 - br.ret.sptk.many b0 };; -.endp bn_mul_words# -#endif - -#if 1 -// -// BN_ULONG bn_mul_add_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w) -// -.global bn_mul_add_words# -.proc bn_mul_add_words# -.align 64 -.skip 48 // makes the loop body aligned at 64-byte boundary -bn_mul_add_words: - .prologue - .save ar.pfs,r2 -{ .mmi; alloc r2=ar.pfs,4,4,0,8 - cmp4.le p6,p0=r34,r0 - .save ar.lc,r3 - mov r3=ar.lc };; -{ .mib; mov r8=r0 // return value - sub r10=r34,r0,1 -(p6) br.ret.spnt.many b0 };; - -{ .mib; setf.sig f8=r35 // w - .save pr,r9 - mov r9=pr - brp.loop.imp .L_bn_mul_add_words_ctop,.L_bn_mul_add_words_cend-16 - } - .body -{ .mmi; ADDP r14=0,r32 // rp - ADDP r15=0,r33 // ap - mov ar.lc=r10 } -{ .mii; ADDP r16=0,r32 // rp copy - mov pr.rot=0x2001<<16 - // ------^----- serves as (p40) at first (p27) - mov ar.ec=11 };; - -// This loop spins in 3*(n+10) ticks on Itanium and in 2*(n+10) on -// Itanium 2. Yes, unlike previous versions it scales:-) Previous -// version was peforming *all* additions in IALU and was starving -// for those even on Itanium 2. In this version one addition is -// moved to FPU and is folded with multiplication. This is at cost -// of propogating the result from previous call to this subroutine -// to L2 cache... In other words negligible even for shorter keys. -// *Overall* performance improvement [over previous version] varies -// from 11 to 22 percent depending on key length. -.L_bn_mul_add_words_ctop: -.pred.rel "mutex",p40,p42 -{ .mfi; (p23) getf.sig r36=f45 // low - (p20) xma.lu f42=f36,f8,f50 // low - (p40) add r39=r39,r35 } // (p27) -{ .mfi; (p16) ldf8 f32=[r15],8 // *(ap++) - (p20) xma.hu f36=f36,f8,f50 // high - (p42) add r39=r39,r35,1 };; // (p27) -{ .mmi; (p24) getf.sig r32=f40 // high - (p16) ldf8 f46=[r16],8 // *(rp1++) - (p40) cmp.ltu p41,p39=r39,r35 } // (p27) -{ .mib; (p26) st8 [r14]=r39,8 // *(rp2++) - (p42) cmp.leu p41,p39=r39,r35 // (p27) - br.ctop.sptk .L_bn_mul_add_words_ctop};; -.L_bn_mul_add_words_cend: - -{ .mmi; .pred.rel "mutex",p40,p42 -(p40) add r8=r35,r0 -(p42) add r8=r35,r0,1 - mov pr=r9,0x1ffff } -{ .mib; rum 1<<5 // clear um.mfh - mov ar.lc=r3 - br.ret.sptk.many b0 };; -.endp bn_mul_add_words# -#endif - -#if 1 -// -// void bn_sqr_words(BN_ULONG *rp, BN_ULONG *ap, int num) -// -.global bn_sqr_words# -.proc bn_sqr_words# -.align 64 -.skip 32 // makes the loop body aligned at 64-byte boundary -bn_sqr_words: - .prologue - .save ar.pfs,r2 -{ .mii; alloc r2=ar.pfs,3,0,0,0 - sxt4 r34=r34 };; -{ .mii; cmp.le p6,p0=r34,r0 - mov r8=r0 } // return value -{ .mfb; ADDP r32=0,r32 - nop.f 0x0 -(p6) br.ret.spnt.many b0 };; - -{ .mii; sub r10=r34,r0,1 - .save ar.lc,r3 - mov r3=ar.lc - .save pr,r9 - mov r9=pr };; - - .body -{ .mib; ADDP r33=0,r33 - mov pr.rot=1<<16 - brp.loop.imp .L_bn_sqr_words_ctop,.L_bn_sqr_words_cend-16 - } -{ .mii; add r34=8,r32 - mov ar.lc=r10 - mov ar.ec=18 };; - -// 2*(n+17) on Itanium, (n+17) on "wider" IA-64 implementations. It's -// possible to compress the epilogue (I'm getting tired to write this -// comment over and over) and get down to 2*n+16 at the cost of -// scalability. The decision will very likely be reconsidered after the -// benchmark program is profiled. I.e. if perfomance gain on Itanium -// will appear larger than loss on "wider" IA-64, then the loop should -// be explicitely split and the epilogue compressed. -.L_bn_sqr_words_ctop: -{ .mfi; (p16) ldf8 f32=[r33],8 - (p25) xmpy.lu f42=f41,f41 - (p0) nop.i 0x0 } -{ .mib; (p33) stf8 [r32]=f50,16 - (p0) nop.i 0x0 - (p0) nop.b 0x0 } -{ .mfi; (p0) nop.m 0x0 - (p25) xmpy.hu f52=f41,f41 - (p0) nop.i 0x0 } -{ .mib; (p33) stf8 [r34]=f60,16 - (p0) nop.i 0x0 - br.ctop.sptk .L_bn_sqr_words_ctop };; -.L_bn_sqr_words_cend: - -{ .mii; nop.m 0x0 - mov pr=r9,0x1ffff - mov ar.lc=r3 } -{ .mfb; rum 1<<5 // clear um.mfh - nop.f 0x0 - br.ret.sptk.many b0 };; -.endp bn_sqr_words# -#endif - -#if 1 -// Apparently we win nothing by implementing special bn_sqr_comba8. -// Yes, it is possible to reduce the number of multiplications by -// almost factor of two, but then the amount of additions would -// increase by factor of two (as we would have to perform those -// otherwise performed by xma ourselves). Normally we would trade -// anyway as multiplications are way more expensive, but not this -// time... Multiplication kernel is fully pipelined and as we drain -// one 128-bit multiplication result per clock cycle multiplications -// are effectively as inexpensive as additions. Special implementation -// might become of interest for "wider" IA-64 implementation as you'll -// be able to get through the multiplication phase faster (there won't -// be any stall issues as discussed in the commentary section below and -// you therefore will be able to employ all 4 FP units)... But these -// Itanium days it's simply too hard to justify the effort so I just -// drop down to bn_mul_comba8 code:-) -// -// void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a) -// -.global bn_sqr_comba8# -.proc bn_sqr_comba8# -.align 64 -bn_sqr_comba8: - .prologue - .save ar.pfs,r2 -#if defined(_HPUX_SOURCE) && !defined(_LP64) -{ .mii; alloc r2=ar.pfs,2,1,0,0 - addp4 r33=0,r33 - addp4 r32=0,r32 };; -{ .mii; -#else -{ .mii; alloc r2=ar.pfs,2,1,0,0 -#endif - mov r34=r33 - add r14=8,r33 };; - .body -{ .mii; add r17=8,r34 - add r15=16,r33 - add r18=16,r34 } -{ .mfb; add r16=24,r33 - br .L_cheat_entry_point8 };; -.endp bn_sqr_comba8# -#endif - -#if 1 -// I've estimated this routine to run in ~120 ticks, but in reality -// (i.e. according to ar.itc) it takes ~160 ticks. Are those extra -// cycles consumed for instructions fetch? Or did I misinterpret some -// clause in Itanium µ-architecture manual? Comments are welcomed and -// highly appreciated. -// -// On Itanium 2 it takes ~190 ticks. This is because of stalls on -// result from getf.sig. I do nothing about it at this point for -// reasons depicted below. -// -// However! It should be noted that even 160 ticks is darn good result -// as it's over 10 (yes, ten, spelled as t-e-n) times faster than the -// C version (compiled with gcc with inline assembler). I really -// kicked compiler's butt here, didn't I? Yeah! This brings us to the -// following statement. It's damn shame that this routine isn't called -// very often nowadays! According to the profiler most CPU time is -// consumed by bn_mul_add_words called from BN_from_montgomery. In -// order to estimate what we're missing, I've compared the performance -// of this routine against "traditional" implementation, i.e. against -// following routine: -// -// void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) -// { r[ 8]=bn_mul_words( &(r[0]),a,8,b[0]); -// r[ 9]=bn_mul_add_words(&(r[1]),a,8,b[1]); -// r[10]=bn_mul_add_words(&(r[2]),a,8,b[2]); -// r[11]=bn_mul_add_words(&(r[3]),a,8,b[3]); -// r[12]=bn_mul_add_words(&(r[4]),a,8,b[4]); -// r[13]=bn_mul_add_words(&(r[5]),a,8,b[5]); -// r[14]=bn_mul_add_words(&(r[6]),a,8,b[6]); -// r[15]=bn_mul_add_words(&(r[7]),a,8,b[7]); -// } -// -// The one below is over 8 times faster than the one above:-( Even -// more reasons to "combafy" bn_mul_add_mont... -// -// And yes, this routine really made me wish there were an optimizing -// assembler! It also feels like it deserves a dedication. -// -// To my wife for being there and to my kids... -// -// void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) -// -#define carry1 r14 -#define carry2 r15 -#define carry3 r34 -.global bn_mul_comba8# -.proc bn_mul_comba8# -.align 64 -bn_mul_comba8: - .prologue - .save ar.pfs,r2 -#if defined(_HPUX_SOURCE) && !defined(_LP64) -{ .mii; alloc r2=ar.pfs,3,0,0,0 - addp4 r33=0,r33 - addp4 r34=0,r34 };; -{ .mii; addp4 r32=0,r32 -#else -{ .mii; alloc r2=ar.pfs,3,0,0,0 -#endif - add r14=8,r33 - add r17=8,r34 } - .body -{ .mii; add r15=16,r33 - add r18=16,r34 - add r16=24,r33 } -.L_cheat_entry_point8: -{ .mmi; add r19=24,r34 - - ldf8 f32=[r33],32 };; - -{ .mmi; ldf8 f120=[r34],32 - ldf8 f121=[r17],32 } -{ .mmi; ldf8 f122=[r18],32 - ldf8 f123=[r19],32 };; -{ .mmi; ldf8 f124=[r34] - ldf8 f125=[r17] } -{ .mmi; ldf8 f126=[r18] - ldf8 f127=[r19] } - -{ .mmi; ldf8 f33=[r14],32 - ldf8 f34=[r15],32 } -{ .mmi; ldf8 f35=[r16],32;; - ldf8 f36=[r33] } -{ .mmi; ldf8 f37=[r14] - ldf8 f38=[r15] } -{ .mfi; ldf8 f39=[r16] -// -------\ Entering multiplier's heaven /------- -// ------------\ /------------ -// -----------------\ /----------------- -// ----------------------\/---------------------- - xma.hu f41=f32,f120,f0 } -{ .mfi; xma.lu f40=f32,f120,f0 };; // (*) -{ .mfi; xma.hu f51=f32,f121,f0 } -{ .mfi; xma.lu f50=f32,f121,f0 };; -{ .mfi; xma.hu f61=f32,f122,f0 } -{ .mfi; xma.lu f60=f32,f122,f0 };; -{ .mfi; xma.hu f71=f32,f123,f0 } -{ .mfi; xma.lu f70=f32,f123,f0 };; -{ .mfi; xma.hu f81=f32,f124,f0 } -{ .mfi; xma.lu f80=f32,f124,f0 };; -{ .mfi; xma.hu f91=f32,f125,f0 } -{ .mfi; xma.lu f90=f32,f125,f0 };; -{ .mfi; xma.hu f101=f32,f126,f0 } -{ .mfi; xma.lu f100=f32,f126,f0 };; -{ .mfi; xma.hu f111=f32,f127,f0 } -{ .mfi; xma.lu f110=f32,f127,f0 };;// -// (*) You can argue that splitting at every second bundle would -// prevent "wider" IA-64 implementations from achieving the peak -// performance. Well, not really... The catch is that if you -// intend to keep 4 FP units busy by splitting at every fourth -// bundle and thus perform these 16 multiplications in 4 ticks, -// the first bundle *below* would stall because the result from -// the first xma bundle *above* won't be available for another 3 -// ticks (if not more, being an optimist, I assume that "wider" -// implementation will have same latency:-). This stall will hold -// you back and the performance would be as if every second bundle -// were split *anyway*... -{ .mfi; getf.sig r16=f40 - xma.hu f42=f33,f120,f41 - add r33=8,r32 } -{ .mfi; xma.lu f41=f33,f120,f41 };; -{ .mfi; getf.sig r24=f50 - xma.hu f52=f33,f121,f51 } -{ .mfi; xma.lu f51=f33,f121,f51 };; -{ .mfi; st8 [r32]=r16,16 - xma.hu f62=f33,f122,f61 } -{ .mfi; xma.lu f61=f33,f122,f61 };; -{ .mfi; xma.hu f72=f33,f123,f71 } -{ .mfi; xma.lu f71=f33,f123,f71 };; -{ .mfi; xma.hu f82=f33,f124,f81 } -{ .mfi; xma.lu f81=f33,f124,f81 };; -{ .mfi; xma.hu f92=f33,f125,f91 } -{ .mfi; xma.lu f91=f33,f125,f91 };; -{ .mfi; xma.hu f102=f33,f126,f101 } -{ .mfi; xma.lu f101=f33,f126,f101 };; -{ .mfi; xma.hu f112=f33,f127,f111 } -{ .mfi; xma.lu f111=f33,f127,f111 };;// -//-------------------------------------------------// -{ .mfi; getf.sig r25=f41 - xma.hu f43=f34,f120,f42 } -{ .mfi; xma.lu f42=f34,f120,f42 };; -{ .mfi; getf.sig r16=f60 - xma.hu f53=f34,f121,f52 } -{ .mfi; xma.lu f52=f34,f121,f52 };; -{ .mfi; getf.sig r17=f51 - xma.hu f63=f34,f122,f62 - add r25=r25,r24 } -{ .mfi; xma.lu f62=f34,f122,f62 - mov carry1=0 };; -{ .mfi; cmp.ltu p6,p0=r25,r24 - xma.hu f73=f34,f123,f72 } -{ .mfi; xma.lu f72=f34,f123,f72 };; -{ .mfi; st8 [r33]=r25,16 - xma.hu f83=f34,f124,f82 -(p6) add carry1=1,carry1 } -{ .mfi; xma.lu f82=f34,f124,f82 };; -{ .mfi; xma.hu f93=f34,f125,f92 } -{ .mfi; xma.lu f92=f34,f125,f92 };; -{ .mfi; xma.hu f103=f34,f126,f102 } -{ .mfi; xma.lu f102=f34,f126,f102 };; -{ .mfi; xma.hu f113=f34,f127,f112 } -{ .mfi; xma.lu f112=f34,f127,f112 };;// -//-------------------------------------------------// -{ .mfi; getf.sig r18=f42 - xma.hu f44=f35,f120,f43 - add r17=r17,r16 } -{ .mfi; xma.lu f43=f35,f120,f43 };; -{ .mfi; getf.sig r24=f70 - xma.hu f54=f35,f121,f53 } -{ .mfi; mov carry2=0 - xma.lu f53=f35,f121,f53 };; -{ .mfi; getf.sig r25=f61 - xma.hu f64=f35,f122,f63 - cmp.ltu p7,p0=r17,r16 } -{ .mfi; add r18=r18,r17 - xma.lu f63=f35,f122,f63 };; -{ .mfi; getf.sig r26=f52 - xma.hu f74=f35,f123,f73 -(p7) add carry2=1,carry2 } -{ .mfi; cmp.ltu p7,p0=r18,r17 - xma.lu f73=f35,f123,f73 - add r18=r18,carry1 };; -{ .mfi; - xma.hu f84=f35,f124,f83 -(p7) add carry2=1,carry2 } -{ .mfi; cmp.ltu p7,p0=r18,carry1 - xma.lu f83=f35,f124,f83 };; -{ .mfi; st8 [r32]=r18,16 - xma.hu f94=f35,f125,f93 -(p7) add carry2=1,carry2 } -{ .mfi; xma.lu f93=f35,f125,f93 };; -{ .mfi; xma.hu f104=f35,f126,f103 } -{ .mfi; xma.lu f103=f35,f126,f103 };; -{ .mfi; xma.hu f114=f35,f127,f113 } -{ .mfi; mov carry1=0 - xma.lu f113=f35,f127,f113 - add r25=r25,r24 };;// -//-------------------------------------------------// -{ .mfi; getf.sig r27=f43 - xma.hu f45=f36,f120,f44 - cmp.ltu p6,p0=r25,r24 } -{ .mfi; xma.lu f44=f36,f120,f44 - add r26=r26,r25 };; -{ .mfi; getf.sig r16=f80 - xma.hu f55=f36,f121,f54 -(p6) add carry1=1,carry1 } -{ .mfi; xma.lu f54=f36,f121,f54 };; -{ .mfi; getf.sig r17=f71 - xma.hu f65=f36,f122,f64 - cmp.ltu p6,p0=r26,r25 } -{ .mfi; xma.lu f64=f36,f122,f64 - add r27=r27,r26 };; -{ .mfi; getf.sig r18=f62 - xma.hu f75=f36,f123,f74 -(p6) add carry1=1,carry1 } -{ .mfi; cmp.ltu p6,p0=r27,r26 - xma.lu f74=f36,f123,f74 - add r27=r27,carry2 };; -{ .mfi; getf.sig r19=f53 - xma.hu f85=f36,f124,f84 -(p6) add carry1=1,carry1 } -{ .mfi; xma.lu f84=f36,f124,f84 - cmp.ltu p6,p0=r27,carry2 };; -{ .mfi; st8 [r33]=r27,16 - xma.hu f95=f36,f125,f94 -(p6) add carry1=1,carry1 } -{ .mfi; xma.lu f94=f36,f125,f94 };; -{ .mfi; xma.hu f105=f36,f126,f104 } -{ .mfi; mov carry2=0 - xma.lu f104=f36,f126,f104 - add r17=r17,r16 };; -{ .mfi; xma.hu f115=f36,f127,f114 - cmp.ltu p7,p0=r17,r16 } -{ .mfi; xma.lu f114=f36,f127,f114 - add r18=r18,r17 };;// -//-------------------------------------------------// -{ .mfi; getf.sig r20=f44 - xma.hu f46=f37,f120,f45 -(p7) add carry2=1,carry2 } -{ .mfi; cmp.ltu p7,p0=r18,r17 - xma.lu f45=f37,f120,f45 - add r19=r19,r18 };; -{ .mfi; getf.sig r24=f90 - xma.hu f56=f37,f121,f55 } -{ .mfi; xma.lu f55=f37,f121,f55 };; -{ .mfi; getf.sig r25=f81 - xma.hu f66=f37,f122,f65 -(p7) add carry2=1,carry2 } -{ .mfi; cmp.ltu p7,p0=r19,r18 - xma.lu f65=f37,f122,f65 - add r20=r20,r19 };; -{ .mfi; getf.sig r26=f72 - xma.hu f76=f37,f123,f75 -(p7) add carry2=1,carry2 } -{ .mfi; cmp.ltu p7,p0=r20,r19 - xma.lu f75=f37,f123,f75 - add r20=r20,carry1 };; -{ .mfi; getf.sig r27=f63 - xma.hu f86=f37,f124,f85 -(p7) add carry2=1,carry2 } -{ .mfi; xma.lu f85=f37,f124,f85 - cmp.ltu p7,p0=r20,carry1 };; -{ .mfi; getf.sig r28=f54 - xma.hu f96=f37,f125,f95 -(p7) add carry2=1,carry2 } -{ .mfi; st8 [r32]=r20,16 - xma.lu f95=f37,f125,f95 };; -{ .mfi; xma.hu f106=f37,f126,f105 } -{ .mfi; mov carry1=0 - xma.lu f105=f37,f126,f105 - add r25=r25,r24 };; -{ .mfi; xma.hu f116=f37,f127,f115 - cmp.ltu p6,p0=r25,r24 } -{ .mfi; xma.lu f115=f37,f127,f115 - add r26=r26,r25 };;// -//-------------------------------------------------// -{ .mfi; getf.sig r29=f45 - xma.hu f47=f38,f120,f46 -(p6) add carry1=1,carry1 } -{ .mfi; cmp.ltu p6,p0=r26,r25 - xma.lu f46=f38,f120,f46 - add r27=r27,r26 };; -{ .mfi; getf.sig r16=f100 - xma.hu f57=f38,f121,f56 -(p6) add carry1=1,carry1 } -{ .mfi; cmp.ltu p6,p0=r27,r26 - xma.lu f56=f38,f121,f56 - add r28=r28,r27 };; -{ .mfi; getf.sig r17=f91 - xma.hu f67=f38,f122,f66 -(p6) add carry1=1,carry1 } -{ .mfi; cmp.ltu p6,p0=r28,r27 - xma.lu f66=f38,f122,f66 - add r29=r29,r28 };; -{ .mfi; getf.sig r18=f82 - xma.hu f77=f38,f123,f76 -(p6) add carry1=1,carry1 } -{ .mfi; cmp.ltu p6,p0=r29,r28 - xma.lu f76=f38,f123,f76 - add r29=r29,carry2 };; -{ .mfi; getf.sig r19=f73 - xma.hu f87=f38,f124,f86 -(p6) add carry1=1,carry1 } -{ .mfi; xma.lu f86=f38,f124,f86 - cmp.ltu p6,p0=r29,carry2 };; -{ .mfi; getf.sig r20=f64 - xma.hu f97=f38,f125,f96 -(p6) add carry1=1,carry1 } -{ .mfi; st8 [r33]=r29,16 - xma.lu f96=f38,f125,f96 };; -{ .mfi; getf.sig r21=f55 - xma.hu f107=f38,f126,f106 } -{ .mfi; mov carry2=0 - xma.lu f106=f38,f126,f106 - add r17=r17,r16 };; -{ .mfi; xma.hu f117=f38,f127,f116 - cmp.ltu p7,p0=r17,r16 } -{ .mfi; xma.lu f116=f38,f127,f116 - add r18=r18,r17 };;// -//-------------------------------------------------// -{ .mfi; getf.sig r22=f46 - xma.hu f48=f39,f120,f47 -(p7) add carry2=1,carry2 } -{ .mfi; cmp.ltu p7,p0=r18,r17 - xma.lu f47=f39,f120,f47 - add r19=r19,r18 };; -{ .mfi; getf.sig r24=f110 - xma.hu f58=f39,f121,f57 -(p7) add carry2=1,carry2 } -{ .mfi; cmp.ltu p7,p0=r19,r18 - xma.lu f57=f39,f121,f57 - add r20=r20,r19 };; -{ .mfi; getf.sig r25=f101 - xma.hu f68=f39,f122,f67 -(p7) add carry2=1,carry2 } -{ .mfi; cmp.ltu p7,p0=r20,r19 - xma.lu f67=f39,f122,f67 - add r21=r21,r20 };; -{ .mfi; getf.sig r26=f92 - xma.hu f78=f39,f123,f77 -(p7) add carry2=1,carry2 } -{ .mfi; cmp.ltu p7,p0=r21,r20 - xma.lu f77=f39,f123,f77 - add r22=r22,r21 };; -{ .mfi; getf.sig r27=f83 - xma.hu f88=f39,f124,f87 -(p7) add carry2=1,carry2 } -{ .mfi; cmp.ltu p7,p0=r22,r21 - xma.lu f87=f39,f124,f87 - add r22=r22,carry1 };; -{ .mfi; getf.sig r28=f74 - xma.hu f98=f39,f125,f97 -(p7) add carry2=1,carry2 } -{ .mfi; xma.lu f97=f39,f125,f97 - cmp.ltu p7,p0=r22,carry1 };; -{ .mfi; getf.sig r29=f65 - xma.hu f108=f39,f126,f107 -(p7) add carry2=1,carry2 } -{ .mfi; st8 [r32]=r22,16 - xma.lu f107=f39,f126,f107 };; -{ .mfi; getf.sig r30=f56 - xma.hu f118=f39,f127,f117 } -{ .mfi; xma.lu f117=f39,f127,f117 };;// -//-------------------------------------------------// -// Leaving muliplier's heaven... Quite a ride, huh? - -{ .mii; getf.sig r31=f47 - add r25=r25,r24 - mov carry1=0 };; -{ .mii; getf.sig r16=f111 - cmp.ltu p6,p0=r25,r24 - add r26=r26,r25 };; -{ .mfb; getf.sig r17=f102 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r26,r25 - add r27=r27,r26 };; -{ .mfb; nop.m 0x0 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r27,r26 - add r28=r28,r27 };; -{ .mii; getf.sig r18=f93 - add r17=r17,r16 - mov carry3=0 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r28,r27 - add r29=r29,r28 };; -{ .mii; getf.sig r19=f84 - cmp.ltu p7,p0=r17,r16 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r29,r28 - add r30=r30,r29 };; -{ .mii; getf.sig r20=f75 - add r18=r18,r17 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r30,r29 - add r31=r31,r30 };; -{ .mfb; getf.sig r21=f66 } -{ .mii; (p7) add carry3=1,carry3 - cmp.ltu p7,p0=r18,r17 - add r19=r19,r18 } -{ .mfb; nop.m 0x0 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r31,r30 - add r31=r31,carry2 };; -{ .mfb; getf.sig r22=f57 } -{ .mii; (p7) add carry3=1,carry3 - cmp.ltu p7,p0=r19,r18 - add r20=r20,r19 } -{ .mfb; nop.m 0x0 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r31,carry2 };; -{ .mfb; getf.sig r23=f48 } -{ .mii; (p7) add carry3=1,carry3 - cmp.ltu p7,p0=r20,r19 - add r21=r21,r20 } -{ .mii; -(p6) add carry1=1,carry1 } -{ .mfb; st8 [r33]=r31,16 };; - -{ .mfb; getf.sig r24=f112 } -{ .mii; (p7) add carry3=1,carry3 - cmp.ltu p7,p0=r21,r20 - add r22=r22,r21 };; -{ .mfb; getf.sig r25=f103 } -{ .mii; (p7) add carry3=1,carry3 - cmp.ltu p7,p0=r22,r21 - add r23=r23,r22 };; -{ .mfb; getf.sig r26=f94 } -{ .mii; (p7) add carry3=1,carry3 - cmp.ltu p7,p0=r23,r22 - add r23=r23,carry1 };; -{ .mfb; getf.sig r27=f85 } -{ .mii; (p7) add carry3=1,carry3 - cmp.ltu p7,p8=r23,carry1};; -{ .mii; getf.sig r28=f76 - add r25=r25,r24 - mov carry1=0 } -{ .mii; st8 [r32]=r23,16 - (p7) add carry2=1,carry3 - (p8) add carry2=0,carry3 };; - -{ .mfb; nop.m 0x0 } -{ .mii; getf.sig r29=f67 - cmp.ltu p6,p0=r25,r24 - add r26=r26,r25 };; -{ .mfb; getf.sig r30=f58 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r26,r25 - add r27=r27,r26 };; -{ .mfb; getf.sig r16=f113 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r27,r26 - add r28=r28,r27 };; -{ .mfb; getf.sig r17=f104 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r28,r27 - add r29=r29,r28 };; -{ .mfb; getf.sig r18=f95 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r29,r28 - add r30=r30,r29 };; -{ .mii; getf.sig r19=f86 - add r17=r17,r16 - mov carry3=0 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r30,r29 - add r30=r30,carry2 };; -{ .mii; getf.sig r20=f77 - cmp.ltu p7,p0=r17,r16 - add r18=r18,r17 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r30,carry2 };; -{ .mfb; getf.sig r21=f68 } -{ .mii; st8 [r33]=r30,16 -(p6) add carry1=1,carry1 };; - -{ .mfb; getf.sig r24=f114 } -{ .mii; (p7) add carry3=1,carry3 - cmp.ltu p7,p0=r18,r17 - add r19=r19,r18 };; -{ .mfb; getf.sig r25=f105 } -{ .mii; (p7) add carry3=1,carry3 - cmp.ltu p7,p0=r19,r18 - add r20=r20,r19 };; -{ .mfb; getf.sig r26=f96 } -{ .mii; (p7) add carry3=1,carry3 - cmp.ltu p7,p0=r20,r19 - add r21=r21,r20 };; -{ .mfb; getf.sig r27=f87 } -{ .mii; (p7) add carry3=1,carry3 - cmp.ltu p7,p0=r21,r20 - add r21=r21,carry1 };; -{ .mib; getf.sig r28=f78 - add r25=r25,r24 } -{ .mib; (p7) add carry3=1,carry3 - cmp.ltu p7,p8=r21,carry1};; -{ .mii; st8 [r32]=r21,16 - (p7) add carry2=1,carry3 - (p8) add carry2=0,carry3 } - -{ .mii; mov carry1=0 - cmp.ltu p6,p0=r25,r24 - add r26=r26,r25 };; -{ .mfb; getf.sig r16=f115 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r26,r25 - add r27=r27,r26 };; -{ .mfb; getf.sig r17=f106 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r27,r26 - add r28=r28,r27 };; -{ .mfb; getf.sig r18=f97 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r28,r27 - add r28=r28,carry2 };; -{ .mib; getf.sig r19=f88 - add r17=r17,r16 } -{ .mib; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r28,carry2 };; -{ .mii; st8 [r33]=r28,16 -(p6) add carry1=1,carry1 } - -{ .mii; mov carry2=0 - cmp.ltu p7,p0=r17,r16 - add r18=r18,r17 };; -{ .mfb; getf.sig r24=f116 } -{ .mii; (p7) add carry2=1,carry2 - cmp.ltu p7,p0=r18,r17 - add r19=r19,r18 };; -{ .mfb; getf.sig r25=f107 } -{ .mii; (p7) add carry2=1,carry2 - cmp.ltu p7,p0=r19,r18 - add r19=r19,carry1 };; -{ .mfb; getf.sig r26=f98 } -{ .mii; (p7) add carry2=1,carry2 - cmp.ltu p7,p0=r19,carry1};; -{ .mii; st8 [r32]=r19,16 - (p7) add carry2=1,carry2 } - -{ .mfb; add r25=r25,r24 };; - -{ .mfb; getf.sig r16=f117 } -{ .mii; mov carry1=0 - cmp.ltu p6,p0=r25,r24 - add r26=r26,r25 };; -{ .mfb; getf.sig r17=f108 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r26,r25 - add r26=r26,carry2 };; -{ .mfb; nop.m 0x0 } -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r26,carry2 };; -{ .mii; st8 [r33]=r26,16 -(p6) add carry1=1,carry1 } - -{ .mfb; add r17=r17,r16 };; -{ .mfb; getf.sig r24=f118 } -{ .mii; mov carry2=0 - cmp.ltu p7,p0=r17,r16 - add r17=r17,carry1 };; -{ .mii; (p7) add carry2=1,carry2 - cmp.ltu p7,p0=r17,carry1};; -{ .mii; st8 [r32]=r17 - (p7) add carry2=1,carry2 };; -{ .mfb; add r24=r24,carry2 };; -{ .mib; st8 [r33]=r24 } - -{ .mib; rum 1<<5 // clear um.mfh - br.ret.sptk.many b0 };; -.endp bn_mul_comba8# -#undef carry3 -#undef carry2 -#undef carry1 -#endif - -#if 1 -// It's possible to make it faster (see comment to bn_sqr_comba8), but -// I reckon it doesn't worth the effort. Basically because the routine -// (actually both of them) practically never called... So I just play -// same trick as with bn_sqr_comba8. -// -// void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a) -// -.global bn_sqr_comba4# -.proc bn_sqr_comba4# -.align 64 -bn_sqr_comba4: - .prologue - .save ar.pfs,r2 -#if defined(_HPUX_SOURCE) && !defined(_LP64) -{ .mii; alloc r2=ar.pfs,2,1,0,0 - addp4 r32=0,r32 - addp4 r33=0,r33 };; -{ .mii; -#else -{ .mii; alloc r2=ar.pfs,2,1,0,0 -#endif - mov r34=r33 - add r14=8,r33 };; - .body -{ .mii; add r17=8,r34 - add r15=16,r33 - add r18=16,r34 } -{ .mfb; add r16=24,r33 - br .L_cheat_entry_point4 };; -.endp bn_sqr_comba4# -#endif - -#if 1 -// Runs in ~115 cycles and ~4.5 times faster than C. Well, whatever... -// -// void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) -// -#define carry1 r14 -#define carry2 r15 -.global bn_mul_comba4# -.proc bn_mul_comba4# -.align 64 -bn_mul_comba4: - .prologue - .save ar.pfs,r2 -#if defined(_HPUX_SOURCE) && !defined(_LP64) -{ .mii; alloc r2=ar.pfs,3,0,0,0 - addp4 r33=0,r33 - addp4 r34=0,r34 };; -{ .mii; addp4 r32=0,r32 -#else -{ .mii; alloc r2=ar.pfs,3,0,0,0 -#endif - add r14=8,r33 - add r17=8,r34 } - .body -{ .mii; add r15=16,r33 - add r18=16,r34 - add r16=24,r33 };; -.L_cheat_entry_point4: -{ .mmi; add r19=24,r34 - - ldf8 f32=[r33] } - -{ .mmi; ldf8 f120=[r34] - ldf8 f121=[r17] };; -{ .mmi; ldf8 f122=[r18] - ldf8 f123=[r19] } - -{ .mmi; ldf8 f33=[r14] - ldf8 f34=[r15] } -{ .mfi; ldf8 f35=[r16] - - xma.hu f41=f32,f120,f0 } -{ .mfi; xma.lu f40=f32,f120,f0 };; -{ .mfi; xma.hu f51=f32,f121,f0 } -{ .mfi; xma.lu f50=f32,f121,f0 };; -{ .mfi; xma.hu f61=f32,f122,f0 } -{ .mfi; xma.lu f60=f32,f122,f0 };; -{ .mfi; xma.hu f71=f32,f123,f0 } -{ .mfi; xma.lu f70=f32,f123,f0 };;// -// Major stall takes place here, and 3 more places below. Result from -// first xma is not available for another 3 ticks. -{ .mfi; getf.sig r16=f40 - xma.hu f42=f33,f120,f41 - add r33=8,r32 } -{ .mfi; xma.lu f41=f33,f120,f41 };; -{ .mfi; getf.sig r24=f50 - xma.hu f52=f33,f121,f51 } -{ .mfi; xma.lu f51=f33,f121,f51 };; -{ .mfi; st8 [r32]=r16,16 - xma.hu f62=f33,f122,f61 } -{ .mfi; xma.lu f61=f33,f122,f61 };; -{ .mfi; xma.hu f72=f33,f123,f71 } -{ .mfi; xma.lu f71=f33,f123,f71 };;// -//-------------------------------------------------// -{ .mfi; getf.sig r25=f41 - xma.hu f43=f34,f120,f42 } -{ .mfi; xma.lu f42=f34,f120,f42 };; -{ .mfi; getf.sig r16=f60 - xma.hu f53=f34,f121,f52 } -{ .mfi; xma.lu f52=f34,f121,f52 };; -{ .mfi; getf.sig r17=f51 - xma.hu f63=f34,f122,f62 - add r25=r25,r24 } -{ .mfi; mov carry1=0 - xma.lu f62=f34,f122,f62 };; -{ .mfi; st8 [r33]=r25,16 - xma.hu f73=f34,f123,f72 - cmp.ltu p6,p0=r25,r24 } -{ .mfi; xma.lu f72=f34,f123,f72 };;// -//-------------------------------------------------// -{ .mfi; getf.sig r18=f42 - xma.hu f44=f35,f120,f43 -(p6) add carry1=1,carry1 } -{ .mfi; add r17=r17,r16 - xma.lu f43=f35,f120,f43 - mov carry2=0 };; -{ .mfi; getf.sig r24=f70 - xma.hu f54=f35,f121,f53 - cmp.ltu p7,p0=r17,r16 } -{ .mfi; xma.lu f53=f35,f121,f53 };; -{ .mfi; getf.sig r25=f61 - xma.hu f64=f35,f122,f63 - add r18=r18,r17 } -{ .mfi; xma.lu f63=f35,f122,f63 -(p7) add carry2=1,carry2 };; -{ .mfi; getf.sig r26=f52 - xma.hu f74=f35,f123,f73 - cmp.ltu p7,p0=r18,r17 } -{ .mfi; xma.lu f73=f35,f123,f73 - add r18=r18,carry1 };; -//-------------------------------------------------// -{ .mii; st8 [r32]=r18,16 -(p7) add carry2=1,carry2 - cmp.ltu p7,p0=r18,carry1 };; - -{ .mfi; getf.sig r27=f43 // last major stall -(p7) add carry2=1,carry2 };; -{ .mii; getf.sig r16=f71 - add r25=r25,r24 - mov carry1=0 };; -{ .mii; getf.sig r17=f62 - cmp.ltu p6,p0=r25,r24 - add r26=r26,r25 };; -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r26,r25 - add r27=r27,r26 };; -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r27,r26 - add r27=r27,carry2 };; -{ .mii; getf.sig r18=f53 -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r27,carry2 };; -{ .mfi; st8 [r33]=r27,16 -(p6) add carry1=1,carry1 } - -{ .mii; getf.sig r19=f44 - add r17=r17,r16 - mov carry2=0 };; -{ .mii; getf.sig r24=f72 - cmp.ltu p7,p0=r17,r16 - add r18=r18,r17 };; -{ .mii; (p7) add carry2=1,carry2 - cmp.ltu p7,p0=r18,r17 - add r19=r19,r18 };; -{ .mii; (p7) add carry2=1,carry2 - cmp.ltu p7,p0=r19,r18 - add r19=r19,carry1 };; -{ .mii; getf.sig r25=f63 - (p7) add carry2=1,carry2 - cmp.ltu p7,p0=r19,carry1};; -{ .mii; st8 [r32]=r19,16 - (p7) add carry2=1,carry2 } - -{ .mii; getf.sig r26=f54 - add r25=r25,r24 - mov carry1=0 };; -{ .mii; getf.sig r16=f73 - cmp.ltu p6,p0=r25,r24 - add r26=r26,r25 };; -{ .mii; -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r26,r25 - add r26=r26,carry2 };; -{ .mii; getf.sig r17=f64 -(p6) add carry1=1,carry1 - cmp.ltu p6,p0=r26,carry2 };; -{ .mii; st8 [r33]=r26,16 -(p6) add carry1=1,carry1 } - -{ .mii; getf.sig r24=f74 - add r17=r17,r16 - mov carry2=0 };; -{ .mii; cmp.ltu p7,p0=r17,r16 - add r17=r17,carry1 };; - -{ .mii; (p7) add carry2=1,carry2 - cmp.ltu p7,p0=r17,carry1};; -{ .mii; st8 [r32]=r17,16 - (p7) add carry2=1,carry2 };; - -{ .mii; add r24=r24,carry2 };; -{ .mii; st8 [r33]=r24 } - -{ .mib; rum 1<<5 // clear um.mfh - br.ret.sptk.many b0 };; -.endp bn_mul_comba4# -#undef carry2 -#undef carry1 -#endif - -#if 1 -// -// BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d) -// -// In the nutshell it's a port of my MIPS III/IV implementation. -// -#define AT r14 -#define H r16 -#define HH r20 -#define L r17 -#define D r18 -#define DH r22 -#define I r21 - -#if 0 -// Some preprocessors (most notably HP-UX) appear to be allergic to -// macros enclosed to parenthesis [as these three were]. -#define cont p16 -#define break p0 // p20 -#define equ p24 -#else -cont=p16 -break=p0 -equ=p24 -#endif - -.global abort# -.global bn_div_words# -.proc bn_div_words# -.align 64 -bn_div_words: - .prologue - .save ar.pfs,r2 -{ .mii; alloc r2=ar.pfs,3,5,0,8 - .save b0,r3 - mov r3=b0 - .save pr,r10 - mov r10=pr };; -{ .mmb; cmp.eq p6,p0=r34,r0 - mov r8=-1 -(p6) br.ret.spnt.many b0 };; - - .body -{ .mii; mov H=r32 // save h - mov ar.ec=0 // don't rotate at exit - mov pr.rot=0 } -{ .mii; mov L=r33 // save l - mov r36=r0 };; - -.L_divw_shift: // -vv- note signed comparison -{ .mfi; (p0) cmp.lt p16,p0=r0,r34 // d - (p0) shladd r33=r34,1,r0 } -{ .mfb; (p0) add r35=1,r36 - (p0) nop.f 0x0 -(p16) br.wtop.dpnt .L_divw_shift };; - -{ .mii; mov D=r34 - shr.u DH=r34,32 - sub r35=64,r36 };; -{ .mii; setf.sig f7=DH - shr.u AT=H,r35 - mov I=r36 };; -{ .mib; cmp.ne p6,p0=r0,AT - shl H=H,r36 -(p6) br.call.spnt.clr b0=abort };; // overflow, die... - -{ .mfi; fcvt.xuf.s1 f7=f7 - shr.u AT=L,r35 };; -{ .mii; shl L=L,r36 - or H=H,AT };; - -{ .mii; nop.m 0x0 - cmp.leu p6,p0=D,H;; -(p6) sub H=H,D } - -{ .mlx; setf.sig f14=D - movl AT=0xffffffff };; -/////////////////////////////////////////////////////////// -{ .mii; setf.sig f6=H - shr.u HH=H,32;; - cmp.eq p6,p7=HH,DH };; -{ .mfb; -(p6) setf.sig f8=AT -(p7) fcvt.xuf.s1 f6=f6 -(p7) br.call.sptk b6=.L_udiv64_32_b6 };; - -{ .mfi; getf.sig r33=f8 // q - xmpy.lu f9=f8,f14 } -{ .mfi; xmpy.hu f10=f8,f14 - shrp H=H,L,32 };; - -{ .mmi; getf.sig r35=f9 // tl - getf.sig r31=f10 };; // th - -.L_divw_1st_iter: -{ .mii; (p0) add r32=-1,r33 - (p0) cmp.eq equ,cont=HH,r31 };; -{ .mii; (p0) cmp.ltu p8,p0=r35,D - (p0) sub r34=r35,D - (equ) cmp.leu break,cont=r35,H };; -{ .mib; (cont) cmp.leu cont,break=HH,r31 - (p8) add r31=-1,r31 -(cont) br.wtop.spnt .L_divw_1st_iter };; -/////////////////////////////////////////////////////////// -{ .mii; sub H=H,r35 - shl r8=r33,32 - shl L=L,32 };; -/////////////////////////////////////////////////////////// -{ .mii; setf.sig f6=H - shr.u HH=H,32;; - cmp.eq p6,p7=HH,DH };; -{ .mfb; -(p6) setf.sig f8=AT -(p7) fcvt.xuf.s1 f6=f6 -(p7) br.call.sptk b6=.L_udiv64_32_b6 };; - -{ .mfi; getf.sig r33=f8 // q - xmpy.lu f9=f8,f14 } -{ .mfi; xmpy.hu f10=f8,f14 - shrp H=H,L,32 };; - -{ .mmi; getf.sig r35=f9 // tl - getf.sig r31=f10 };; // th - -.L_divw_2nd_iter: -{ .mii; (p0) add r32=-1,r33 - (p0) cmp.eq equ,cont=HH,r31 };; -{ .mii; (p0) cmp.ltu p8,p0=r35,D - (p0) sub r34=r35,D - (equ) cmp.leu break,cont=r35,H };; -{ .mib; (cont) cmp.leu cont,break=HH,r31 - (p8) add r31=-1,r31 -(cont) br.wtop.spnt .L_divw_2nd_iter };; -/////////////////////////////////////////////////////////// -{ .mii; sub H=H,r35 - or r8=r8,r33 - mov ar.pfs=r2 };; -{ .mii; shr.u r9=H,I // remainder if anybody wants it - mov pr=r10,0x1ffff } -{ .mfb; br.ret.sptk.many b0 };; - -// Unsigned 64 by 32 (well, by 64 for the moment) bit integer division -// procedure. -// -// inputs: f6 = (double)a, f7 = (double)b -// output: f8 = (int)(a/b) -// clobbered: f8,f9,f10,f11,pred -pred=p15 -// One can argue that this snippet is copyrighted to Intel -// Corporation, as it's essentially identical to one of those -// found in "Divide, Square Root and Remainder" section at -// http://www.intel.com/software/products/opensource/libraries/num.htm. -// Yes, I admit that the referred code was used as template, -// but after I realized that there hardly is any other instruction -// sequence which would perform this operation. I mean I figure that -// any independent attempt to implement high-performance division -// will result in code virtually identical to the Intel code. It -// should be noted though that below division kernel is 1 cycle -// faster than Intel one (note commented splits:-), not to mention -// original prologue (rather lack of one) and epilogue. -.align 32 -.skip 16 -.L_udiv64_32_b6: - frcpa.s1 f8,pred=f6,f7;; // [0] y0 = 1 / b - -(pred) fnma.s1 f9=f7,f8,f1 // [5] e0 = 1 - b * y0 -(pred) fmpy.s1 f10=f6,f8;; // [5] q0 = a * y0 -(pred) fmpy.s1 f11=f9,f9 // [10] e1 = e0 * e0 -(pred) fma.s1 f10=f9,f10,f10;; // [10] q1 = q0 + e0 * q0 -(pred) fma.s1 f8=f9,f8,f8 //;; // [15] y1 = y0 + e0 * y0 -(pred) fma.s1 f9=f11,f10,f10;; // [15] q2 = q1 + e1 * q1 -(pred) fma.s1 f8=f11,f8,f8 //;; // [20] y2 = y1 + e1 * y1 -(pred) fnma.s1 f10=f7,f9,f6;; // [20] r2 = a - b * q2 -(pred) fma.s1 f8=f10,f8,f9;; // [25] q3 = q2 + r2 * y2 - - fcvt.fxu.trunc.s1 f8=f8 // [30] q = trunc(q3) - br.ret.sptk.many b6;; -.endp bn_div_words# -#endif diff --git a/app/openssl/crypto/bn/asm/mips3-mont.pl b/app/openssl/crypto/bn/asm/mips3-mont.pl deleted file mode 100644 index 8f9156e0..00000000 --- a/app/openssl/crypto/bn/asm/mips3-mont.pl +++ /dev/null @@ -1,327 +0,0 @@ -#!/usr/bin/env perl -# -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# This module doesn't present direct interest for OpenSSL, because it -# doesn't provide better performance for longer keys. While 512-bit -# RSA private key operations are 40% faster, 1024-bit ones are hardly -# faster at all, while longer key operations are slower by up to 20%. -# It might be of interest to embedded system developers though, as -# it's smaller than 1KB, yet offers ~3x improvement over compiler -# generated code. -# -# The module targets N32 and N64 MIPS ABIs and currently is a bit -# IRIX-centric, i.e. is likely to require adaptation for other OSes. - -# int bn_mul_mont( -$rp="a0"; # BN_ULONG *rp, -$ap="a1"; # const BN_ULONG *ap, -$bp="a2"; # const BN_ULONG *bp, -$np="a3"; # const BN_ULONG *np, -$n0="a4"; # const BN_ULONG *n0, -$num="a5"; # int num); - -$lo0="a6"; -$hi0="a7"; -$lo1="v0"; -$hi1="v1"; -$aj="t0"; -$bi="t1"; -$nj="t2"; -$tp="t3"; -$alo="s0"; -$ahi="s1"; -$nlo="s2"; -$nhi="s3"; -$tj="s4"; -$i="s5"; -$j="s6"; -$fp="t8"; -$m1="t9"; - -$FRAME=8*(2+8); - -$code=<<___; -#include <asm.h> -#include <regdef.h> - -.text - -.set noat -.set reorder - -.align 5 -.globl bn_mul_mont -.ent bn_mul_mont -bn_mul_mont: - .set noreorder - PTR_SUB sp,64 - move $fp,sp - .frame $fp,64,ra - slt AT,$num,4 - li v0,0 - beqzl AT,.Lproceed - nop - jr ra - PTR_ADD sp,$fp,64 - .set reorder -.align 5 -.Lproceed: - ld $n0,0($n0) - ld $bi,0($bp) # bp[0] - ld $aj,0($ap) # ap[0] - ld $nj,0($np) # np[0] - PTR_SUB sp,16 # place for two extra words - sll $num,3 - li AT,-4096 - PTR_SUB sp,$num - and sp,AT - - sd s0,0($fp) - sd s1,8($fp) - sd s2,16($fp) - sd s3,24($fp) - sd s4,32($fp) - sd s5,40($fp) - sd s6,48($fp) - sd s7,56($fp) - - dmultu $aj,$bi - ld $alo,8($ap) - ld $nlo,8($np) - mflo $lo0 - mfhi $hi0 - dmultu $lo0,$n0 - mflo $m1 - - dmultu $alo,$bi - mflo $alo - mfhi $ahi - - dmultu $nj,$m1 - mflo $lo1 - mfhi $hi1 - dmultu $nlo,$m1 - daddu $lo1,$lo0 - sltu AT,$lo1,$lo0 - daddu $hi1,AT - mflo $nlo - mfhi $nhi - - move $tp,sp - li $j,16 -.align 4 -.L1st: - .set noreorder - PTR_ADD $aj,$ap,$j - ld $aj,($aj) - PTR_ADD $nj,$np,$j - ld $nj,($nj) - - dmultu $aj,$bi - daddu $lo0,$alo,$hi0 - daddu $lo1,$nlo,$hi1 - sltu AT,$lo0,$hi0 - sltu s7,$lo1,$hi1 - daddu $hi0,$ahi,AT - daddu $hi1,$nhi,s7 - mflo $alo - mfhi $ahi - - daddu $lo1,$lo0 - sltu AT,$lo1,$lo0 - dmultu $nj,$m1 - daddu $hi1,AT - addu $j,8 - sd $lo1,($tp) - sltu s7,$j,$num - mflo $nlo - mfhi $nhi - - bnez s7,.L1st - PTR_ADD $tp,8 - .set reorder - - daddu $lo0,$alo,$hi0 - sltu AT,$lo0,$hi0 - daddu $hi0,$ahi,AT - - daddu $lo1,$nlo,$hi1 - sltu s7,$lo1,$hi1 - daddu $hi1,$nhi,s7 - daddu $lo1,$lo0 - sltu AT,$lo1,$lo0 - daddu $hi1,AT - - sd $lo1,($tp) - - daddu $hi1,$hi0 - sltu AT,$hi1,$hi0 - sd $hi1,8($tp) - sd AT,16($tp) - - li $i,8 -.align 4 -.Louter: - PTR_ADD $bi,$bp,$i - ld $bi,($bi) - ld $aj,($ap) - ld $alo,8($ap) - ld $tj,(sp) - - dmultu $aj,$bi - ld $nj,($np) - ld $nlo,8($np) - mflo $lo0 - mfhi $hi0 - daddu $lo0,$tj - dmultu $lo0,$n0 - sltu AT,$lo0,$tj - daddu $hi0,AT - mflo $m1 - - dmultu $alo,$bi - mflo $alo - mfhi $ahi - - dmultu $nj,$m1 - mflo $lo1 - mfhi $hi1 - - dmultu $nlo,$m1 - daddu $lo1,$lo0 - sltu AT,$lo1,$lo0 - daddu $hi1,AT - mflo $nlo - mfhi $nhi - - move $tp,sp - li $j,16 - ld $tj,8($tp) -.align 4 -.Linner: - .set noreorder - PTR_ADD $aj,$ap,$j - ld $aj,($aj) - PTR_ADD $nj,$np,$j - ld $nj,($nj) - - dmultu $aj,$bi - daddu $lo0,$alo,$hi0 - daddu $lo1,$nlo,$hi1 - sltu AT,$lo0,$hi0 - sltu s7,$lo1,$hi1 - daddu $hi0,$ahi,AT - daddu $hi1,$nhi,s7 - mflo $alo - mfhi $ahi - - daddu $lo0,$tj - addu $j,8 - dmultu $nj,$m1 - sltu AT,$lo0,$tj - daddu $lo1,$lo0 - daddu $hi0,AT - sltu s7,$lo1,$lo0 - ld $tj,16($tp) - daddu $hi1,s7 - sltu AT,$j,$num - mflo $nlo - mfhi $nhi - sd $lo1,($tp) - bnez AT,.Linner - PTR_ADD $tp,8 - .set reorder - - daddu $lo0,$alo,$hi0 - sltu AT,$lo0,$hi0 - daddu $hi0,$ahi,AT - daddu $lo0,$tj - sltu s7,$lo0,$tj - daddu $hi0,s7 - - ld $tj,16($tp) - daddu $lo1,$nlo,$hi1 - sltu AT,$lo1,$hi1 - daddu $hi1,$nhi,AT - daddu $lo1,$lo0 - sltu s7,$lo1,$lo0 - daddu $hi1,s7 - sd $lo1,($tp) - - daddu $lo1,$hi1,$hi0 - sltu $hi1,$lo1,$hi0 - daddu $lo1,$tj - sltu AT,$lo1,$tj - daddu $hi1,AT - sd $lo1,8($tp) - sd $hi1,16($tp) - - addu $i,8 - sltu s7,$i,$num - bnez s7,.Louter - - .set noreorder - PTR_ADD $tj,sp,$num # &tp[num] - move $tp,sp - move $ap,sp - li $hi0,0 # clear borrow bit - -.align 4 -.Lsub: ld $lo0,($tp) - ld $lo1,($np) - PTR_ADD $tp,8 - PTR_ADD $np,8 - dsubu $lo1,$lo0,$lo1 # tp[i]-np[i] - sgtu AT,$lo1,$lo0 - dsubu $lo0,$lo1,$hi0 - sgtu $hi0,$lo0,$lo1 - sd $lo0,($rp) - or $hi0,AT - sltu AT,$tp,$tj - bnez AT,.Lsub - PTR_ADD $rp,8 - - dsubu $hi0,$hi1,$hi0 # handle upmost overflow bit - move $tp,sp - PTR_SUB $rp,$num # restore rp - not $hi1,$hi0 - - and $ap,$hi0,sp - and $bp,$hi1,$rp - or $ap,$ap,$bp # ap=borrow?tp:rp - -.align 4 -.Lcopy: ld $aj,($ap) - PTR_ADD $ap,8 - PTR_ADD $tp,8 - sd zero,-8($tp) - sltu AT,$tp,$tj - sd $aj,($rp) - bnez AT,.Lcopy - PTR_ADD $rp,8 - - ld s0,0($fp) - ld s1,8($fp) - ld s2,16($fp) - ld s3,24($fp) - ld s4,32($fp) - ld s5,40($fp) - ld s6,48($fp) - ld s7,56($fp) - li v0,1 - jr ra - PTR_ADD sp,$fp,64 - .set reorder -END(bn_mul_mont) -.rdata -.asciiz "Montgomery Multiplication for MIPS III/IV, CRYPTOGAMS by <appro\@openssl.org>" -___ - -print $code; -close STDOUT; diff --git a/app/openssl/crypto/bn/asm/mips3.s b/app/openssl/crypto/bn/asm/mips3.s deleted file mode 100644 index dca4105c..00000000 --- a/app/openssl/crypto/bn/asm/mips3.s +++ /dev/null @@ -1,2201 +0,0 @@ -.rdata -.asciiz "mips3.s, Version 1.1" -.asciiz "MIPS III/IV ISA artwork by Andy Polyakov <appro@fy.chalmers.se>" - -/* - * ==================================================================== - * Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL - * project. - * - * Rights for redistribution and usage in source and binary forms are - * granted according to the OpenSSL license. Warranty of any kind is - * disclaimed. - * ==================================================================== - */ - -/* - * This is my modest contributon to the OpenSSL project (see - * http://www.openssl.org/ for more information about it) and is - * a drop-in MIPS III/IV ISA replacement for crypto/bn/bn_asm.c - * module. For updates see http://fy.chalmers.se/~appro/hpe/. - * - * The module is designed to work with either of the "new" MIPS ABI(5), - * namely N32 or N64, offered by IRIX 6.x. It's not ment to work under - * IRIX 5.x not only because it doesn't support new ABIs but also - * because 5.x kernels put R4x00 CPU into 32-bit mode and all those - * 64-bit instructions (daddu, dmultu, etc.) found below gonna only - * cause illegal instruction exception:-( - * - * In addition the code depends on preprocessor flags set up by MIPSpro - * compiler driver (either as or cc) and therefore (probably?) can't be - * compiled by the GNU assembler. GNU C driver manages fine though... - * I mean as long as -mmips-as is specified or is the default option, - * because then it simply invokes /usr/bin/as which in turn takes - * perfect care of the preprocessor definitions. Another neat feature - * offered by the MIPSpro assembler is an optimization pass. This gave - * me the opportunity to have the code looking more regular as all those - * architecture dependent instruction rescheduling details were left to - * the assembler. Cool, huh? - * - * Performance improvement is astonishing! 'apps/openssl speed rsa dsa' - * goes way over 3 times faster! - * - * <appro@fy.chalmers.se> - */ -#include <asm.h> -#include <regdef.h> - -#if _MIPS_ISA>=4 -#define MOVNZ(cond,dst,src) \ - movn dst,src,cond -#else -#define MOVNZ(cond,dst,src) \ - .set noreorder; \ - bnezl cond,.+8; \ - move dst,src; \ - .set reorder -#endif - -.text - -.set noat -.set reorder - -#define MINUS4 v1 - -.align 5 -LEAF(bn_mul_add_words) - .set noreorder - bgtzl a2,.L_bn_mul_add_words_proceed - ld t0,0(a1) - jr ra - move v0,zero - .set reorder - -.L_bn_mul_add_words_proceed: - li MINUS4,-4 - and ta0,a2,MINUS4 - move v0,zero - beqz ta0,.L_bn_mul_add_words_tail - -.L_bn_mul_add_words_loop: - dmultu t0,a3 - ld t1,0(a0) - ld t2,8(a1) - ld t3,8(a0) - ld ta0,16(a1) - ld ta1,16(a0) - daddu t1,v0 - sltu v0,t1,v0 /* All manuals say it "compares 32-bit - * values", but it seems to work fine - * even on 64-bit registers. */ - mflo AT - mfhi t0 - daddu t1,AT - daddu v0,t0 - sltu AT,t1,AT - sd t1,0(a0) - daddu v0,AT - - dmultu t2,a3 - ld ta2,24(a1) - ld ta3,24(a0) - daddu t3,v0 - sltu v0,t3,v0 - mflo AT - mfhi t2 - daddu t3,AT - daddu v0,t2 - sltu AT,t3,AT - sd t3,8(a0) - daddu v0,AT - - dmultu ta0,a3 - subu a2,4 - PTR_ADD a0,32 - PTR_ADD a1,32 - daddu ta1,v0 - sltu v0,ta1,v0 - mflo AT - mfhi ta0 - daddu ta1,AT - daddu v0,ta0 - sltu AT,ta1,AT - sd ta1,-16(a0) - daddu v0,AT - - - dmultu ta2,a3 - and ta0,a2,MINUS4 - daddu ta3,v0 - sltu v0,ta3,v0 - mflo AT - mfhi ta2 - daddu ta3,AT - daddu v0,ta2 - sltu AT,ta3,AT - sd ta3,-8(a0) - daddu v0,AT - .set noreorder - bgtzl ta0,.L_bn_mul_add_words_loop - ld t0,0(a1) - - bnezl a2,.L_bn_mul_add_words_tail - ld t0,0(a1) - .set reorder - -.L_bn_mul_add_words_return: - jr ra - -.L_bn_mul_add_words_tail: - dmultu t0,a3 - ld t1,0(a0) - subu a2,1 - daddu t1,v0 - sltu v0,t1,v0 - mflo AT - mfhi t0 - daddu t1,AT - daddu v0,t0 - sltu AT,t1,AT - sd t1,0(a0) - daddu v0,AT - beqz a2,.L_bn_mul_add_words_return - - ld t0,8(a1) - dmultu t0,a3 - ld t1,8(a0) - subu a2,1 - daddu t1,v0 - sltu v0,t1,v0 - mflo AT - mfhi t0 - daddu t1,AT - daddu v0,t0 - sltu AT,t1,AT - sd t1,8(a0) - daddu v0,AT - beqz a2,.L_bn_mul_add_words_return - - ld t0,16(a1) - dmultu t0,a3 - ld t1,16(a0) - daddu t1,v0 - sltu v0,t1,v0 - mflo AT - mfhi t0 - daddu t1,AT - daddu v0,t0 - sltu AT,t1,AT - sd t1,16(a0) - daddu v0,AT - jr ra -END(bn_mul_add_words) - -.align 5 -LEAF(bn_mul_words) - .set noreorder - bgtzl a2,.L_bn_mul_words_proceed - ld t0,0(a1) - jr ra - move v0,zero - .set reorder - -.L_bn_mul_words_proceed: - li MINUS4,-4 - and ta0,a2,MINUS4 - move v0,zero - beqz ta0,.L_bn_mul_words_tail - -.L_bn_mul_words_loop: - dmultu t0,a3 - ld t2,8(a1) - ld ta0,16(a1) - ld ta2,24(a1) - mflo AT - mfhi t0 - daddu v0,AT - sltu t1,v0,AT - sd v0,0(a0) - daddu v0,t1,t0 - - dmultu t2,a3 - subu a2,4 - PTR_ADD a0,32 - PTR_ADD a1,32 - mflo AT - mfhi t2 - daddu v0,AT - sltu t3,v0,AT - sd v0,-24(a0) - daddu v0,t3,t2 - - dmultu ta0,a3 - mflo AT - mfhi ta0 - daddu v0,AT - sltu ta1,v0,AT - sd v0,-16(a0) - daddu v0,ta1,ta0 - - - dmultu ta2,a3 - and ta0,a2,MINUS4 - mflo AT - mfhi ta2 - daddu v0,AT - sltu ta3,v0,AT - sd v0,-8(a0) - daddu v0,ta3,ta2 - .set noreorder - bgtzl ta0,.L_bn_mul_words_loop - ld t0,0(a1) - - bnezl a2,.L_bn_mul_words_tail - ld t0,0(a1) - .set reorder - -.L_bn_mul_words_return: - jr ra - -.L_bn_mul_words_tail: - dmultu t0,a3 - subu a2,1 - mflo AT - mfhi t0 - daddu v0,AT - sltu t1,v0,AT - sd v0,0(a0) - daddu v0,t1,t0 - beqz a2,.L_bn_mul_words_return - - ld t0,8(a1) - dmultu t0,a3 - subu a2,1 - mflo AT - mfhi t0 - daddu v0,AT - sltu t1,v0,AT - sd v0,8(a0) - daddu v0,t1,t0 - beqz a2,.L_bn_mul_words_return - - ld t0,16(a1) - dmultu t0,a3 - mflo AT - mfhi t0 - daddu v0,AT - sltu t1,v0,AT - sd v0,16(a0) - daddu v0,t1,t0 - jr ra -END(bn_mul_words) - -.align 5 -LEAF(bn_sqr_words) - .set noreorder - bgtzl a2,.L_bn_sqr_words_proceed - ld t0,0(a1) - jr ra - move v0,zero - .set reorder - -.L_bn_sqr_words_proceed: - li MINUS4,-4 - and ta0,a2,MINUS4 - move v0,zero - beqz ta0,.L_bn_sqr_words_tail - -.L_bn_sqr_words_loop: - dmultu t0,t0 - ld t2,8(a1) - ld ta0,16(a1) - ld ta2,24(a1) - mflo t1 - mfhi t0 - sd t1,0(a0) - sd t0,8(a0) - - dmultu t2,t2 - subu a2,4 - PTR_ADD a0,64 - PTR_ADD a1,32 - mflo t3 - mfhi t2 - sd t3,-48(a0) - sd t2,-40(a0) - - dmultu ta0,ta0 - mflo ta1 - mfhi ta0 - sd ta1,-32(a0) - sd ta0,-24(a0) - - - dmultu ta2,ta2 - and ta0,a2,MINUS4 - mflo ta3 - mfhi ta2 - sd ta3,-16(a0) - sd ta2,-8(a0) - - .set noreorder - bgtzl ta0,.L_bn_sqr_words_loop - ld t0,0(a1) - - bnezl a2,.L_bn_sqr_words_tail - ld t0,0(a1) - .set reorder - -.L_bn_sqr_words_return: - move v0,zero - jr ra - -.L_bn_sqr_words_tail: - dmultu t0,t0 - subu a2,1 - mflo t1 - mfhi t0 - sd t1,0(a0) - sd t0,8(a0) - beqz a2,.L_bn_sqr_words_return - - ld t0,8(a1) - dmultu t0,t0 - subu a2,1 - mflo t1 - mfhi t0 - sd t1,16(a0) - sd t0,24(a0) - beqz a2,.L_bn_sqr_words_return - - ld t0,16(a1) - dmultu t0,t0 - mflo t1 - mfhi t0 - sd t1,32(a0) - sd t0,40(a0) - jr ra -END(bn_sqr_words) - -.align 5 -LEAF(bn_add_words) - .set noreorder - bgtzl a3,.L_bn_add_words_proceed - ld t0,0(a1) - jr ra - move v0,zero - .set reorder - -.L_bn_add_words_proceed: - li MINUS4,-4 - and AT,a3,MINUS4 - move v0,zero - beqz AT,.L_bn_add_words_tail - -.L_bn_add_words_loop: - ld ta0,0(a2) - subu a3,4 - ld t1,8(a1) - and AT,a3,MINUS4 - ld t2,16(a1) - PTR_ADD a2,32 - ld t3,24(a1) - PTR_ADD a0,32 - ld ta1,-24(a2) - PTR_ADD a1,32 - ld ta2,-16(a2) - ld ta3,-8(a2) - daddu ta0,t0 - sltu t8,ta0,t0 - daddu t0,ta0,v0 - sltu v0,t0,ta0 - sd t0,-32(a0) - daddu v0,t8 - - daddu ta1,t1 - sltu t9,ta1,t1 - daddu t1,ta1,v0 - sltu v0,t1,ta1 - sd t1,-24(a0) - daddu v0,t9 - - daddu ta2,t2 - sltu t8,ta2,t2 - daddu t2,ta2,v0 - sltu v0,t2,ta2 - sd t2,-16(a0) - daddu v0,t8 - - daddu ta3,t3 - sltu t9,ta3,t3 - daddu t3,ta3,v0 - sltu v0,t3,ta3 - sd t3,-8(a0) - daddu v0,t9 - - .set noreorder - bgtzl AT,.L_bn_add_words_loop - ld t0,0(a1) - - bnezl a3,.L_bn_add_words_tail - ld t0,0(a1) - .set reorder - -.L_bn_add_words_return: - jr ra - -.L_bn_add_words_tail: - ld ta0,0(a2) - daddu ta0,t0 - subu a3,1 - sltu t8,ta0,t0 - daddu t0,ta0,v0 - sltu v0,t0,ta0 - sd t0,0(a0) - daddu v0,t8 - beqz a3,.L_bn_add_words_return - - ld t1,8(a1) - ld ta1,8(a2) - daddu ta1,t1 - subu a3,1 - sltu t9,ta1,t1 - daddu t1,ta1,v0 - sltu v0,t1,ta1 - sd t1,8(a0) - daddu v0,t9 - beqz a3,.L_bn_add_words_return - - ld t2,16(a1) - ld ta2,16(a2) - daddu ta2,t2 - sltu t8,ta2,t2 - daddu t2,ta2,v0 - sltu v0,t2,ta2 - sd t2,16(a0) - daddu v0,t8 - jr ra -END(bn_add_words) - -.align 5 -LEAF(bn_sub_words) - .set noreorder - bgtzl a3,.L_bn_sub_words_proceed - ld t0,0(a1) - jr ra - move v0,zero - .set reorder - -.L_bn_sub_words_proceed: - li MINUS4,-4 - and AT,a3,MINUS4 - move v0,zero - beqz AT,.L_bn_sub_words_tail - -.L_bn_sub_words_loop: - ld ta0,0(a2) - subu a3,4 - ld t1,8(a1) - and AT,a3,MINUS4 - ld t2,16(a1) - PTR_ADD a2,32 - ld t3,24(a1) - PTR_ADD a0,32 - ld ta1,-24(a2) - PTR_ADD a1,32 - ld ta2,-16(a2) - ld ta3,-8(a2) - sltu t8,t0,ta0 - dsubu t0,ta0 - dsubu ta0,t0,v0 - sd ta0,-32(a0) - MOVNZ (t0,v0,t8) - - sltu t9,t1,ta1 - dsubu t1,ta1 - dsubu ta1,t1,v0 - sd ta1,-24(a0) - MOVNZ (t1,v0,t9) - - - sltu t8,t2,ta2 - dsubu t2,ta2 - dsubu ta2,t2,v0 - sd ta2,-16(a0) - MOVNZ (t2,v0,t8) - - sltu t9,t3,ta3 - dsubu t3,ta3 - dsubu ta3,t3,v0 - sd ta3,-8(a0) - MOVNZ (t3,v0,t9) - - .set noreorder - bgtzl AT,.L_bn_sub_words_loop - ld t0,0(a1) - - bnezl a3,.L_bn_sub_words_tail - ld t0,0(a1) - .set reorder - -.L_bn_sub_words_return: - jr ra - -.L_bn_sub_words_tail: - ld ta0,0(a2) - subu a3,1 - sltu t8,t0,ta0 - dsubu t0,ta0 - dsubu ta0,t0,v0 - MOVNZ (t0,v0,t8) - sd ta0,0(a0) - beqz a3,.L_bn_sub_words_return - - ld t1,8(a1) - subu a3,1 - ld ta1,8(a2) - sltu t9,t1,ta1 - dsubu t1,ta1 - dsubu ta1,t1,v0 - MOVNZ (t1,v0,t9) - sd ta1,8(a0) - beqz a3,.L_bn_sub_words_return - - ld t2,16(a1) - ld ta2,16(a2) - sltu t8,t2,ta2 - dsubu t2,ta2 - dsubu ta2,t2,v0 - MOVNZ (t2,v0,t8) - sd ta2,16(a0) - jr ra -END(bn_sub_words) - -#undef MINUS4 - -.align 5 -LEAF(bn_div_3_words) - .set reorder - move a3,a0 /* we know that bn_div_words doesn't - * touch a3, ta2, ta3 and preserves a2 - * so that we can save two arguments - * and return address in registers - * instead of stack:-) - */ - ld a0,(a3) - move ta2,a1 - ld a1,-8(a3) - bne a0,a2,.L_bn_div_3_words_proceed - li v0,-1 - jr ra -.L_bn_div_3_words_proceed: - move ta3,ra - bal bn_div_words - move ra,ta3 - dmultu ta2,v0 - ld t2,-16(a3) - move ta0,zero - mfhi t1 - mflo t0 - sltu t8,t1,v1 -.L_bn_div_3_words_inner_loop: - bnez t8,.L_bn_div_3_words_inner_loop_done - sgeu AT,t2,t0 - seq t9,t1,v1 - and AT,t9 - sltu t3,t0,ta2 - daddu v1,a2 - dsubu t1,t3 - dsubu t0,ta2 - sltu t8,t1,v1 - sltu ta0,v1,a2 - or t8,ta0 - .set noreorder - beqzl AT,.L_bn_div_3_words_inner_loop - dsubu v0,1 - .set reorder -.L_bn_div_3_words_inner_loop_done: - jr ra -END(bn_div_3_words) - -.align 5 -LEAF(bn_div_words) - .set noreorder - bnezl a2,.L_bn_div_words_proceed - move v1,zero - jr ra - li v0,-1 /* I'd rather signal div-by-zero - * which can be done with 'break 7' */ - -.L_bn_div_words_proceed: - bltz a2,.L_bn_div_words_body - move t9,v1 - dsll a2,1 - bgtz a2,.-4 - addu t9,1 - - .set reorder - negu t1,t9 - li t2,-1 - dsll t2,t1 - and t2,a0 - dsrl AT,a1,t1 - .set noreorder - bnezl t2,.+8 - break 6 /* signal overflow */ - .set reorder - dsll a0,t9 - dsll a1,t9 - or a0,AT - -#define QT ta0 -#define HH ta1 -#define DH v1 -.L_bn_div_words_body: - dsrl DH,a2,32 - sgeu AT,a0,a2 - .set noreorder - bnezl AT,.+8 - dsubu a0,a2 - .set reorder - - li QT,-1 - dsrl HH,a0,32 - dsrl QT,32 /* q=0xffffffff */ - beq DH,HH,.L_bn_div_words_skip_div1 - ddivu zero,a0,DH - mflo QT -.L_bn_div_words_skip_div1: - dmultu a2,QT - dsll t3,a0,32 - dsrl AT,a1,32 - or t3,AT - mflo t0 - mfhi t1 -.L_bn_div_words_inner_loop1: - sltu t2,t3,t0 - seq t8,HH,t1 - sltu AT,HH,t1 - and t2,t8 - sltu v0,t0,a2 - or AT,t2 - .set noreorder - beqz AT,.L_bn_div_words_inner_loop1_done - dsubu t1,v0 - dsubu t0,a2 - b .L_bn_div_words_inner_loop1 - dsubu QT,1 - .set reorder -.L_bn_div_words_inner_loop1_done: - - dsll a1,32 - dsubu a0,t3,t0 - dsll v0,QT,32 - - li QT,-1 - dsrl HH,a0,32 - dsrl QT,32 /* q=0xffffffff */ - beq DH,HH,.L_bn_div_words_skip_div2 - ddivu zero,a0,DH - mflo QT -.L_bn_div_words_skip_div2: -#undef DH - dmultu a2,QT - dsll t3,a0,32 - dsrl AT,a1,32 - or t3,AT - mflo t0 - mfhi t1 -.L_bn_div_words_inner_loop2: - sltu t2,t3,t0 - seq t8,HH,t1 - sltu AT,HH,t1 - and t2,t8 - sltu v1,t0,a2 - or AT,t2 - .set noreorder - beqz AT,.L_bn_div_words_inner_loop2_done - dsubu t1,v1 - dsubu t0,a2 - b .L_bn_div_words_inner_loop2 - dsubu QT,1 - .set reorder -.L_bn_div_words_inner_loop2_done: -#undef HH - - dsubu a0,t3,t0 - or v0,QT - dsrl v1,a0,t9 /* v1 contains remainder if anybody wants it */ - dsrl a2,t9 /* restore a2 */ - jr ra -#undef QT -END(bn_div_words) - -#define a_0 t0 -#define a_1 t1 -#define a_2 t2 -#define a_3 t3 -#define b_0 ta0 -#define b_1 ta1 -#define b_2 ta2 -#define b_3 ta3 - -#define a_4 s0 -#define a_5 s2 -#define a_6 s4 -#define a_7 a1 /* once we load a[7] we don't need a anymore */ -#define b_4 s1 -#define b_5 s3 -#define b_6 s5 -#define b_7 a2 /* once we load b[7] we don't need b anymore */ - -#define t_1 t8 -#define t_2 t9 - -#define c_1 v0 -#define c_2 v1 -#define c_3 a3 - -#define FRAME_SIZE 48 - -.align 5 -LEAF(bn_mul_comba8) - .set noreorder - PTR_SUB sp,FRAME_SIZE - .frame sp,64,ra - .set reorder - ld a_0,0(a1) /* If compiled with -mips3 option on - * R5000 box assembler barks on this - * line with "shouldn't have mult/div - * as last instruction in bb (R10K - * bug)" warning. If anybody out there - * has a clue about how to circumvent - * this do send me a note. - * <appro@fy.chalmers.se> - */ - ld b_0,0(a2) - ld a_1,8(a1) - ld a_2,16(a1) - ld a_3,24(a1) - ld b_1,8(a2) - ld b_2,16(a2) - ld b_3,24(a2) - dmultu a_0,b_0 /* mul_add_c(a[0],b[0],c1,c2,c3); */ - sd s0,0(sp) - sd s1,8(sp) - sd s2,16(sp) - sd s3,24(sp) - sd s4,32(sp) - sd s5,40(sp) - mflo c_1 - mfhi c_2 - - dmultu a_0,b_1 /* mul_add_c(a[0],b[1],c2,c3,c1); */ - ld a_4,32(a1) - ld a_5,40(a1) - ld a_6,48(a1) - ld a_7,56(a1) - ld b_4,32(a2) - ld b_5,40(a2) - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu c_3,t_2,AT - dmultu a_1,b_0 /* mul_add_c(a[1],b[0],c2,c3,c1); */ - ld b_6,48(a2) - ld b_7,56(a2) - sd c_1,0(a0) /* r[0]=c1; */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - sd c_2,8(a0) /* r[1]=c2; */ - - dmultu a_2,b_0 /* mul_add_c(a[2],b[0],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - dmultu a_1,b_1 /* mul_add_c(a[1],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu c_2,c_1,t_2 - dmultu a_0,b_2 /* mul_add_c(a[0],b[2],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,16(a0) /* r[2]=c3; */ - - dmultu a_0,b_3 /* mul_add_c(a[0],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu c_3,c_2,t_2 - dmultu a_1,b_2 /* mul_add_c(a[1],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_2,b_1 /* mul_add_c(a[2],b[1],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_3,b_0 /* mul_add_c(a[3],b[0],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,24(a0) /* r[3]=c1; */ - - dmultu a_4,b_0 /* mul_add_c(a[4],b[0],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - dmultu a_3,b_1 /* mul_add_c(a[3],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_2,b_2 /* mul_add_c(a[2],b[2],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_1,b_3 /* mul_add_c(a[1],b[3],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_0,b_4 /* mul_add_c(a[0],b[4],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,32(a0) /* r[4]=c2; */ - - dmultu a_0,b_5 /* mul_add_c(a[0],b[5],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu c_2,c_1,t_2 - dmultu a_1,b_4 /* mul_add_c(a[1],b[4],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_2,b_3 /* mul_add_c(a[2],b[3],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_3,b_2 /* mul_add_c(a[3],b[2],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_4,b_1 /* mul_add_c(a[4],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_5,b_0 /* mul_add_c(a[5],b[0],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,40(a0) /* r[5]=c3; */ - - dmultu a_6,b_0 /* mul_add_c(a[6],b[0],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu c_3,c_2,t_2 - dmultu a_5,b_1 /* mul_add_c(a[5],b[1],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_4,b_2 /* mul_add_c(a[4],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_3,b_3 /* mul_add_c(a[3],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_2,b_4 /* mul_add_c(a[2],b[4],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_1,b_5 /* mul_add_c(a[1],b[5],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_0,b_6 /* mul_add_c(a[0],b[6],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,48(a0) /* r[6]=c1; */ - - dmultu a_0,b_7 /* mul_add_c(a[0],b[7],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - dmultu a_1,b_6 /* mul_add_c(a[1],b[6],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_2,b_5 /* mul_add_c(a[2],b[5],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_3,b_4 /* mul_add_c(a[3],b[4],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_4,b_3 /* mul_add_c(a[4],b[3],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_5,b_2 /* mul_add_c(a[5],b[2],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_6,b_1 /* mul_add_c(a[6],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_7,b_0 /* mul_add_c(a[7],b[0],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,56(a0) /* r[7]=c2; */ - - dmultu a_7,b_1 /* mul_add_c(a[7],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu c_2,c_1,t_2 - dmultu a_6,b_2 /* mul_add_c(a[6],b[2],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_5,b_3 /* mul_add_c(a[5],b[3],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_4,b_4 /* mul_add_c(a[4],b[4],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_3,b_5 /* mul_add_c(a[3],b[5],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_2,b_6 /* mul_add_c(a[2],b[6],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_1,b_7 /* mul_add_c(a[1],b[7],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,64(a0) /* r[8]=c3; */ - - dmultu a_2,b_7 /* mul_add_c(a[2],b[7],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu c_3,c_2,t_2 - dmultu a_3,b_6 /* mul_add_c(a[3],b[6],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_4,b_5 /* mul_add_c(a[4],b[5],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_5,b_4 /* mul_add_c(a[5],b[4],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_6,b_3 /* mul_add_c(a[6],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_7,b_2 /* mul_add_c(a[7],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,72(a0) /* r[9]=c1; */ - - dmultu a_7,b_3 /* mul_add_c(a[7],b[3],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - dmultu a_6,b_4 /* mul_add_c(a[6],b[4],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_5,b_5 /* mul_add_c(a[5],b[5],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_4,b_6 /* mul_add_c(a[4],b[6],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_3,b_7 /* mul_add_c(a[3],b[7],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,80(a0) /* r[10]=c2; */ - - dmultu a_4,b_7 /* mul_add_c(a[4],b[7],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu c_2,c_1,t_2 - dmultu a_5,b_6 /* mul_add_c(a[5],b[6],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_6,b_5 /* mul_add_c(a[6],b[5],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_7,b_4 /* mul_add_c(a[7],b[4],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,88(a0) /* r[11]=c3; */ - - dmultu a_7,b_5 /* mul_add_c(a[7],b[5],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu c_3,c_2,t_2 - dmultu a_6,b_6 /* mul_add_c(a[6],b[6],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_5,b_7 /* mul_add_c(a[5],b[7],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,96(a0) /* r[12]=c1; */ - - dmultu a_6,b_7 /* mul_add_c(a[6],b[7],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - dmultu a_7,b_6 /* mul_add_c(a[7],b[6],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,104(a0) /* r[13]=c2; */ - - dmultu a_7,b_7 /* mul_add_c(a[7],b[7],c3,c1,c2); */ - ld s0,0(sp) - ld s1,8(sp) - ld s2,16(sp) - ld s3,24(sp) - ld s4,32(sp) - ld s5,40(sp) - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sd c_3,112(a0) /* r[14]=c3; */ - sd c_1,120(a0) /* r[15]=c1; */ - - PTR_ADD sp,FRAME_SIZE - - jr ra -END(bn_mul_comba8) - -.align 5 -LEAF(bn_mul_comba4) - .set reorder - ld a_0,0(a1) - ld b_0,0(a2) - ld a_1,8(a1) - ld a_2,16(a1) - dmultu a_0,b_0 /* mul_add_c(a[0],b[0],c1,c2,c3); */ - ld a_3,24(a1) - ld b_1,8(a2) - ld b_2,16(a2) - ld b_3,24(a2) - mflo c_1 - mfhi c_2 - sd c_1,0(a0) - - dmultu a_0,b_1 /* mul_add_c(a[0],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu c_3,t_2,AT - dmultu a_1,b_0 /* mul_add_c(a[1],b[0],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - sd c_2,8(a0) - - dmultu a_2,b_0 /* mul_add_c(a[2],b[0],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - dmultu a_1,b_1 /* mul_add_c(a[1],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu c_2,c_1,t_2 - dmultu a_0,b_2 /* mul_add_c(a[0],b[2],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,16(a0) - - dmultu a_0,b_3 /* mul_add_c(a[0],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu c_3,c_2,t_2 - dmultu a_1,b_2 /* mul_add_c(a[1],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_2,b_1 /* mul_add_c(a[2],b[1],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_3,b_0 /* mul_add_c(a[3],b[0],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,24(a0) - - dmultu a_3,b_1 /* mul_add_c(a[3],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - dmultu a_2,b_2 /* mul_add_c(a[2],b[2],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_1,b_3 /* mul_add_c(a[1],b[3],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,32(a0) - - dmultu a_2,b_3 /* mul_add_c(a[2],b[3],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu c_2,c_1,t_2 - dmultu a_3,b_2 /* mul_add_c(a[3],b[2],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,40(a0) - - dmultu a_3,b_3 /* mul_add_c(a[3],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sd c_1,48(a0) - sd c_2,56(a0) - - jr ra -END(bn_mul_comba4) - -#undef a_4 -#undef a_5 -#undef a_6 -#undef a_7 -#define a_4 b_0 -#define a_5 b_1 -#define a_6 b_2 -#define a_7 b_3 - -.align 5 -LEAF(bn_sqr_comba8) - .set reorder - ld a_0,0(a1) - ld a_1,8(a1) - ld a_2,16(a1) - ld a_3,24(a1) - - dmultu a_0,a_0 /* mul_add_c(a[0],b[0],c1,c2,c3); */ - ld a_4,32(a1) - ld a_5,40(a1) - ld a_6,48(a1) - ld a_7,56(a1) - mflo c_1 - mfhi c_2 - sd c_1,0(a0) - - dmultu a_0,a_1 /* mul_add_c2(a[0],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu c_3,t_2,AT - sd c_2,8(a0) - - dmultu a_2,a_0 /* mul_add_c2(a[2],b[0],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt c_2,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_1,a_1 /* mul_add_c(a[1],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,16(a0) - - dmultu a_0,a_3 /* mul_add_c2(a[0],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt c_3,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_1,a_2 /* mul_add_c2(a[1],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_3,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,24(a0) - - dmultu a_4,a_0 /* mul_add_c2(a[4],b[0],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_3,a_1 /* mul_add_c2(a[3],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_1,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_2,a_2 /* mul_add_c(a[2],b[2],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,32(a0) - - dmultu a_0,a_5 /* mul_add_c2(a[0],b[5],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt c_2,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_1,a_4 /* mul_add_c2(a[1],b[4],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_2,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_2,a_3 /* mul_add_c2(a[2],b[3],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_2,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,40(a0) - - dmultu a_6,a_0 /* mul_add_c2(a[6],b[0],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt c_3,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_5,a_1 /* mul_add_c2(a[5],b[1],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_3,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_4,a_2 /* mul_add_c2(a[4],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_3,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_3,a_3 /* mul_add_c(a[3],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,48(a0) - - dmultu a_0,a_7 /* mul_add_c2(a[0],b[7],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_1,a_6 /* mul_add_c2(a[1],b[6],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_1,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_2,a_5 /* mul_add_c2(a[2],b[5],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_1,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_3,a_4 /* mul_add_c2(a[3],b[4],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_1,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,56(a0) - - dmultu a_7,a_1 /* mul_add_c2(a[7],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt c_2,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_6,a_2 /* mul_add_c2(a[6],b[2],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_2,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_5,a_3 /* mul_add_c2(a[5],b[3],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_2,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_4,a_4 /* mul_add_c(a[4],b[4],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,64(a0) - - dmultu a_2,a_7 /* mul_add_c2(a[2],b[7],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt c_3,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_3,a_6 /* mul_add_c2(a[3],b[6],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_3,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_4,a_5 /* mul_add_c2(a[4],b[5],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_3,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,72(a0) - - dmultu a_7,a_3 /* mul_add_c2(a[7],b[3],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_6,a_4 /* mul_add_c2(a[6],b[4],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_1,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_5,a_5 /* mul_add_c(a[5],b[5],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,80(a0) - - dmultu a_4,a_7 /* mul_add_c2(a[4],b[7],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt c_2,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_5,a_6 /* mul_add_c2(a[5],b[6],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_2,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,88(a0) - - dmultu a_7,a_5 /* mul_add_c2(a[7],b[5],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt c_3,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_6,a_6 /* mul_add_c(a[6],b[6],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,96(a0) - - dmultu a_6,a_7 /* mul_add_c2(a[6],b[7],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,104(a0) - - dmultu a_7,a_7 /* mul_add_c(a[7],b[7],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sd c_3,112(a0) - sd c_1,120(a0) - - jr ra -END(bn_sqr_comba8) - -.align 5 -LEAF(bn_sqr_comba4) - .set reorder - ld a_0,0(a1) - ld a_1,8(a1) - ld a_2,16(a1) - ld a_3,24(a1) - dmultu a_0,a_0 /* mul_add_c(a[0],b[0],c1,c2,c3); */ - mflo c_1 - mfhi c_2 - sd c_1,0(a0) - - dmultu a_0,a_1 /* mul_add_c2(a[0],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu c_3,t_2,AT - sd c_2,8(a0) - - dmultu a_2,a_0 /* mul_add_c2(a[2],b[0],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt c_2,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_1,a_1 /* mul_add_c(a[1],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,16(a0) - - dmultu a_0,a_3 /* mul_add_c2(a[0],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt c_3,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_1,a_2 /* mul_add_c(a2[1],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_3,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,24(a0) - - dmultu a_3,a_1 /* mul_add_c2(a[3],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_2,a_2 /* mul_add_c(a[2],b[2],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,32(a0) - - dmultu a_2,a_3 /* mul_add_c2(a[2],b[3],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt c_2,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,40(a0) - - dmultu a_3,a_3 /* mul_add_c(a[3],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sd c_1,48(a0) - sd c_2,56(a0) - - jr ra -END(bn_sqr_comba4) diff --git a/app/openssl/crypto/bn/asm/pa-risc2.s b/app/openssl/crypto/bn/asm/pa-risc2.s deleted file mode 100644 index f3b16290..00000000 --- a/app/openssl/crypto/bn/asm/pa-risc2.s +++ /dev/null @@ -1,1618 +0,0 @@ -; -; PA-RISC 2.0 implementation of bn_asm code, based on the -; 64-bit version of the code. This code is effectively the -; same as the 64-bit version except the register model is -; slightly different given all values must be 32-bit between -; function calls. Thus the 64-bit return values are returned -; in %ret0 and %ret1 vs just %ret0 as is done in 64-bit -; -; -; This code is approximately 2x faster than the C version -; for RSA/DSA. -; -; See http://devresource.hp.com/ for more details on the PA-RISC -; architecture. Also see the book "PA-RISC 2.0 Architecture" -; by Gerry Kane for information on the instruction set architecture. -; -; Code written by Chris Ruemmler (with some help from the HP C -; compiler). -; -; The code compiles with HP's assembler -; - - .level 2.0N - .space $TEXT$ - .subspa $CODE$,QUAD=0,ALIGN=8,ACCESS=0x2c,CODE_ONLY - -; -; Global Register definitions used for the routines. -; -; Some information about HP's runtime architecture for 32-bits. -; -; "Caller save" means the calling function must save the register -; if it wants the register to be preserved. -; "Callee save" means if a function uses the register, it must save -; the value before using it. -; -; For the floating point registers -; -; "caller save" registers: fr4-fr11, fr22-fr31 -; "callee save" registers: fr12-fr21 -; "special" registers: fr0-fr3 (status and exception registers) -; -; For the integer registers -; value zero : r0 -; "caller save" registers: r1,r19-r26 -; "callee save" registers: r3-r18 -; return register : r2 (rp) -; return values ; r28,r29 (ret0,ret1) -; Stack pointer ; r30 (sp) -; millicode return ptr ; r31 (also a caller save register) - - -; -; Arguments to the routines -; -r_ptr .reg %r26 -a_ptr .reg %r25 -b_ptr .reg %r24 -num .reg %r24 -n .reg %r23 - -; -; Note that the "w" argument for bn_mul_add_words and bn_mul_words -; is passed on the stack at a delta of -56 from the top of stack -; as the routine is entered. -; - -; -; Globals used in some routines -; - -top_overflow .reg %r23 -high_mask .reg %r22 ; value 0xffffffff80000000L - - -;------------------------------------------------------------------------------ -; -; bn_mul_add_words -; -;BN_ULONG bn_mul_add_words(BN_ULONG *r_ptr, BN_ULONG *a_ptr, -; int num, BN_ULONG w) -; -; arg0 = r_ptr -; arg1 = a_ptr -; arg3 = num -; -56(sp) = w -; -; Local register definitions -; - -fm1 .reg %fr22 -fm .reg %fr23 -ht_temp .reg %fr24 -ht_temp_1 .reg %fr25 -lt_temp .reg %fr26 -lt_temp_1 .reg %fr27 -fm1_1 .reg %fr28 -fm_1 .reg %fr29 - -fw_h .reg %fr7L -fw_l .reg %fr7R -fw .reg %fr7 - -fht_0 .reg %fr8L -flt_0 .reg %fr8R -t_float_0 .reg %fr8 - -fht_1 .reg %fr9L -flt_1 .reg %fr9R -t_float_1 .reg %fr9 - -tmp_0 .reg %r31 -tmp_1 .reg %r21 -m_0 .reg %r20 -m_1 .reg %r19 -ht_0 .reg %r1 -ht_1 .reg %r3 -lt_0 .reg %r4 -lt_1 .reg %r5 -m1_0 .reg %r6 -m1_1 .reg %r7 -rp_val .reg %r8 -rp_val_1 .reg %r9 - -bn_mul_add_words - .export bn_mul_add_words,entry,NO_RELOCATION,LONG_RETURN - .proc - .callinfo frame=128 - .entry - .align 64 - - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - NOP ; Needed to make the loop 16-byte aligned - NOP ; needed to make the loop 16-byte aligned - - STD %r5,16(%sp) ; save r5 - NOP - STD %r6,24(%sp) ; save r6 - STD %r7,32(%sp) ; save r7 - - STD %r8,40(%sp) ; save r8 - STD %r9,48(%sp) ; save r9 - COPY %r0,%ret1 ; return 0 by default - DEPDI,Z 1,31,1,top_overflow ; top_overflow = 1 << 32 - - CMPIB,>= 0,num,bn_mul_add_words_exit ; if (num <= 0) then exit - LDO 128(%sp),%sp ; bump stack - - ; - ; The loop is unrolled twice, so if there is only 1 number - ; then go straight to the cleanup code. - ; - CMPIB,= 1,num,bn_mul_add_words_single_top - FLDD -184(%sp),fw ; (-56-128) load up w into fw (fw_h/fw_l) - - ; - ; This loop is unrolled 2 times (64-byte aligned as well) - ; - ; PA-RISC 2.0 chips have two fully pipelined multipliers, thus - ; two 32-bit mutiplies can be issued per cycle. - ; -bn_mul_add_words_unroll2 - - FLDD 0(a_ptr),t_float_0 ; load up 64-bit value (fr8L) ht(L)/lt(R) - FLDD 8(a_ptr),t_float_1 ; load up 64-bit value (fr8L) ht(L)/lt(R) - LDD 0(r_ptr),rp_val ; rp[0] - LDD 8(r_ptr),rp_val_1 ; rp[1] - - XMPYU fht_0,fw_l,fm1 ; m1[0] = fht_0*fw_l - XMPYU fht_1,fw_l,fm1_1 ; m1[1] = fht_1*fw_l - FSTD fm1,-16(%sp) ; -16(sp) = m1[0] - FSTD fm1_1,-48(%sp) ; -48(sp) = m1[1] - - XMPYU flt_0,fw_h,fm ; m[0] = flt_0*fw_h - XMPYU flt_1,fw_h,fm_1 ; m[1] = flt_1*fw_h - FSTD fm,-8(%sp) ; -8(sp) = m[0] - FSTD fm_1,-40(%sp) ; -40(sp) = m[1] - - XMPYU fht_0,fw_h,ht_temp ; ht_temp = fht_0*fw_h - XMPYU fht_1,fw_h,ht_temp_1 ; ht_temp_1 = fht_1*fw_h - FSTD ht_temp,-24(%sp) ; -24(sp) = ht_temp - FSTD ht_temp_1,-56(%sp) ; -56(sp) = ht_temp_1 - - XMPYU flt_0,fw_l,lt_temp ; lt_temp = lt*fw_l - XMPYU flt_1,fw_l,lt_temp_1 ; lt_temp = lt*fw_l - FSTD lt_temp,-32(%sp) ; -32(sp) = lt_temp - FSTD lt_temp_1,-64(%sp) ; -64(sp) = lt_temp_1 - - LDD -8(%sp),m_0 ; m[0] - LDD -40(%sp),m_1 ; m[1] - LDD -16(%sp),m1_0 ; m1[0] - LDD -48(%sp),m1_1 ; m1[1] - - LDD -24(%sp),ht_0 ; ht[0] - LDD -56(%sp),ht_1 ; ht[1] - ADD,L m1_0,m_0,tmp_0 ; tmp_0 = m[0] + m1[0]; - ADD,L m1_1,m_1,tmp_1 ; tmp_1 = m[1] + m1[1]; - - LDD -32(%sp),lt_0 - LDD -64(%sp),lt_1 - CMPCLR,*>>= tmp_0,m1_0, %r0 ; if (m[0] < m1[0]) - ADD,L ht_0,top_overflow,ht_0 ; ht[0] += (1<<32) - - CMPCLR,*>>= tmp_1,m1_1,%r0 ; if (m[1] < m1[1]) - ADD,L ht_1,top_overflow,ht_1 ; ht[1] += (1<<32) - EXTRD,U tmp_0,31,32,m_0 ; m[0]>>32 - DEPD,Z tmp_0,31,32,m1_0 ; m1[0] = m[0]<<32 - - EXTRD,U tmp_1,31,32,m_1 ; m[1]>>32 - DEPD,Z tmp_1,31,32,m1_1 ; m1[1] = m[1]<<32 - ADD,L ht_0,m_0,ht_0 ; ht[0]+= (m[0]>>32) - ADD,L ht_1,m_1,ht_1 ; ht[1]+= (m[1]>>32) - - ADD lt_0,m1_0,lt_0 ; lt[0] = lt[0]+m1[0]; - ADD,DC ht_0,%r0,ht_0 ; ht[0]++ - ADD lt_1,m1_1,lt_1 ; lt[1] = lt[1]+m1[1]; - ADD,DC ht_1,%r0,ht_1 ; ht[1]++ - - ADD %ret1,lt_0,lt_0 ; lt[0] = lt[0] + c; - ADD,DC ht_0,%r0,ht_0 ; ht[0]++ - ADD lt_0,rp_val,lt_0 ; lt[0] = lt[0]+rp[0] - ADD,DC ht_0,%r0,ht_0 ; ht[0]++ - - LDO -2(num),num ; num = num - 2; - ADD ht_0,lt_1,lt_1 ; lt[1] = lt[1] + ht_0 (c); - ADD,DC ht_1,%r0,ht_1 ; ht[1]++ - STD lt_0,0(r_ptr) ; rp[0] = lt[0] - - ADD lt_1,rp_val_1,lt_1 ; lt[1] = lt[1]+rp[1] - ADD,DC ht_1,%r0,%ret1 ; ht[1]++ - LDO 16(a_ptr),a_ptr ; a_ptr += 2 - - STD lt_1,8(r_ptr) ; rp[1] = lt[1] - CMPIB,<= 2,num,bn_mul_add_words_unroll2 ; go again if more to do - LDO 16(r_ptr),r_ptr ; r_ptr += 2 - - CMPIB,=,N 0,num,bn_mul_add_words_exit ; are we done, or cleanup last one - - ; - ; Top of loop aligned on 64-byte boundary - ; -bn_mul_add_words_single_top - FLDD 0(a_ptr),t_float_0 ; load up 64-bit value (fr8L) ht(L)/lt(R) - LDD 0(r_ptr),rp_val ; rp[0] - LDO 8(a_ptr),a_ptr ; a_ptr++ - XMPYU fht_0,fw_l,fm1 ; m1 = ht*fw_l - FSTD fm1,-16(%sp) ; -16(sp) = m1 - XMPYU flt_0,fw_h,fm ; m = lt*fw_h - FSTD fm,-8(%sp) ; -8(sp) = m - XMPYU fht_0,fw_h,ht_temp ; ht_temp = ht*fw_h - FSTD ht_temp,-24(%sp) ; -24(sp) = ht - XMPYU flt_0,fw_l,lt_temp ; lt_temp = lt*fw_l - FSTD lt_temp,-32(%sp) ; -32(sp) = lt - - LDD -8(%sp),m_0 - LDD -16(%sp),m1_0 ; m1 = temp1 - ADD,L m_0,m1_0,tmp_0 ; tmp_0 = m + m1; - LDD -24(%sp),ht_0 - LDD -32(%sp),lt_0 - - CMPCLR,*>>= tmp_0,m1_0,%r0 ; if (m < m1) - ADD,L ht_0,top_overflow,ht_0 ; ht += (1<<32) - - EXTRD,U tmp_0,31,32,m_0 ; m>>32 - DEPD,Z tmp_0,31,32,m1_0 ; m1 = m<<32 - - ADD,L ht_0,m_0,ht_0 ; ht+= (m>>32) - ADD lt_0,m1_0,tmp_0 ; tmp_0 = lt+m1; - ADD,DC ht_0,%r0,ht_0 ; ht++ - ADD %ret1,tmp_0,lt_0 ; lt = lt + c; - ADD,DC ht_0,%r0,ht_0 ; ht++ - ADD lt_0,rp_val,lt_0 ; lt = lt+rp[0] - ADD,DC ht_0,%r0,%ret1 ; ht++ - STD lt_0,0(r_ptr) ; rp[0] = lt - -bn_mul_add_words_exit - .EXIT - - EXTRD,U %ret1,31,32,%ret0 ; for 32-bit, return in ret0/ret1 - LDD -80(%sp),%r9 ; restore r9 - LDD -88(%sp),%r8 ; restore r8 - LDD -96(%sp),%r7 ; restore r7 - LDD -104(%sp),%r6 ; restore r6 - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 ; restore r3 - .PROCEND ;in=23,24,25,26,29;out=28; - -;---------------------------------------------------------------------------- -; -;BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w) -; -; arg0 = rp -; arg1 = ap -; arg3 = num -; w on stack at -56(sp) - -bn_mul_words - .proc - .callinfo frame=128 - .entry - .EXPORT bn_mul_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .align 64 - - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - NOP - STD %r5,16(%sp) ; save r5 - - STD %r6,24(%sp) ; save r6 - STD %r7,32(%sp) ; save r7 - COPY %r0,%ret1 ; return 0 by default - DEPDI,Z 1,31,1,top_overflow ; top_overflow = 1 << 32 - - CMPIB,>= 0,num,bn_mul_words_exit - LDO 128(%sp),%sp ; bump stack - - ; - ; See if only 1 word to do, thus just do cleanup - ; - CMPIB,= 1,num,bn_mul_words_single_top - FLDD -184(%sp),fw ; (-56-128) load up w into fw (fw_h/fw_l) - - ; - ; This loop is unrolled 2 times (64-byte aligned as well) - ; - ; PA-RISC 2.0 chips have two fully pipelined multipliers, thus - ; two 32-bit mutiplies can be issued per cycle. - ; -bn_mul_words_unroll2 - - FLDD 0(a_ptr),t_float_0 ; load up 64-bit value (fr8L) ht(L)/lt(R) - FLDD 8(a_ptr),t_float_1 ; load up 64-bit value (fr8L) ht(L)/lt(R) - XMPYU fht_0,fw_l,fm1 ; m1[0] = fht_0*fw_l - XMPYU fht_1,fw_l,fm1_1 ; m1[1] = ht*fw_l - - FSTD fm1,-16(%sp) ; -16(sp) = m1 - FSTD fm1_1,-48(%sp) ; -48(sp) = m1 - XMPYU flt_0,fw_h,fm ; m = lt*fw_h - XMPYU flt_1,fw_h,fm_1 ; m = lt*fw_h - - FSTD fm,-8(%sp) ; -8(sp) = m - FSTD fm_1,-40(%sp) ; -40(sp) = m - XMPYU fht_0,fw_h,ht_temp ; ht_temp = fht_0*fw_h - XMPYU fht_1,fw_h,ht_temp_1 ; ht_temp = ht*fw_h - - FSTD ht_temp,-24(%sp) ; -24(sp) = ht - FSTD ht_temp_1,-56(%sp) ; -56(sp) = ht - XMPYU flt_0,fw_l,lt_temp ; lt_temp = lt*fw_l - XMPYU flt_1,fw_l,lt_temp_1 ; lt_temp = lt*fw_l - - FSTD lt_temp,-32(%sp) ; -32(sp) = lt - FSTD lt_temp_1,-64(%sp) ; -64(sp) = lt - LDD -8(%sp),m_0 - LDD -40(%sp),m_1 - - LDD -16(%sp),m1_0 - LDD -48(%sp),m1_1 - LDD -24(%sp),ht_0 - LDD -56(%sp),ht_1 - - ADD,L m1_0,m_0,tmp_0 ; tmp_0 = m + m1; - ADD,L m1_1,m_1,tmp_1 ; tmp_1 = m + m1; - LDD -32(%sp),lt_0 - LDD -64(%sp),lt_1 - - CMPCLR,*>>= tmp_0,m1_0, %r0 ; if (m < m1) - ADD,L ht_0,top_overflow,ht_0 ; ht += (1<<32) - CMPCLR,*>>= tmp_1,m1_1,%r0 ; if (m < m1) - ADD,L ht_1,top_overflow,ht_1 ; ht += (1<<32) - - EXTRD,U tmp_0,31,32,m_0 ; m>>32 - DEPD,Z tmp_0,31,32,m1_0 ; m1 = m<<32 - EXTRD,U tmp_1,31,32,m_1 ; m>>32 - DEPD,Z tmp_1,31,32,m1_1 ; m1 = m<<32 - - ADD,L ht_0,m_0,ht_0 ; ht+= (m>>32) - ADD,L ht_1,m_1,ht_1 ; ht+= (m>>32) - ADD lt_0,m1_0,lt_0 ; lt = lt+m1; - ADD,DC ht_0,%r0,ht_0 ; ht++ - - ADD lt_1,m1_1,lt_1 ; lt = lt+m1; - ADD,DC ht_1,%r0,ht_1 ; ht++ - ADD %ret1,lt_0,lt_0 ; lt = lt + c (ret1); - ADD,DC ht_0,%r0,ht_0 ; ht++ - - ADD ht_0,lt_1,lt_1 ; lt = lt + c (ht_0) - ADD,DC ht_1,%r0,ht_1 ; ht++ - STD lt_0,0(r_ptr) ; rp[0] = lt - STD lt_1,8(r_ptr) ; rp[1] = lt - - COPY ht_1,%ret1 ; carry = ht - LDO -2(num),num ; num = num - 2; - LDO 16(a_ptr),a_ptr ; ap += 2 - CMPIB,<= 2,num,bn_mul_words_unroll2 - LDO 16(r_ptr),r_ptr ; rp++ - - CMPIB,=,N 0,num,bn_mul_words_exit ; are we done? - - ; - ; Top of loop aligned on 64-byte boundary - ; -bn_mul_words_single_top - FLDD 0(a_ptr),t_float_0 ; load up 64-bit value (fr8L) ht(L)/lt(R) - - XMPYU fht_0,fw_l,fm1 ; m1 = ht*fw_l - FSTD fm1,-16(%sp) ; -16(sp) = m1 - XMPYU flt_0,fw_h,fm ; m = lt*fw_h - FSTD fm,-8(%sp) ; -8(sp) = m - XMPYU fht_0,fw_h,ht_temp ; ht_temp = ht*fw_h - FSTD ht_temp,-24(%sp) ; -24(sp) = ht - XMPYU flt_0,fw_l,lt_temp ; lt_temp = lt*fw_l - FSTD lt_temp,-32(%sp) ; -32(sp) = lt - - LDD -8(%sp),m_0 - LDD -16(%sp),m1_0 - ADD,L m_0,m1_0,tmp_0 ; tmp_0 = m + m1; - LDD -24(%sp),ht_0 - LDD -32(%sp),lt_0 - - CMPCLR,*>>= tmp_0,m1_0,%r0 ; if (m < m1) - ADD,L ht_0,top_overflow,ht_0 ; ht += (1<<32) - - EXTRD,U tmp_0,31,32,m_0 ; m>>32 - DEPD,Z tmp_0,31,32,m1_0 ; m1 = m<<32 - - ADD,L ht_0,m_0,ht_0 ; ht+= (m>>32) - ADD lt_0,m1_0,lt_0 ; lt= lt+m1; - ADD,DC ht_0,%r0,ht_0 ; ht++ - - ADD %ret1,lt_0,lt_0 ; lt = lt + c; - ADD,DC ht_0,%r0,ht_0 ; ht++ - - COPY ht_0,%ret1 ; copy carry - STD lt_0,0(r_ptr) ; rp[0] = lt - -bn_mul_words_exit - .EXIT - EXTRD,U %ret1,31,32,%ret0 ; for 32-bit, return in ret0/ret1 - LDD -96(%sp),%r7 ; restore r7 - LDD -104(%sp),%r6 ; restore r6 - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 ; restore r3 - .PROCEND - -;---------------------------------------------------------------------------- -; -;void bn_sqr_words(BN_ULONG *rp, BN_ULONG *ap, int num) -; -; arg0 = rp -; arg1 = ap -; arg2 = num -; - -bn_sqr_words - .proc - .callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE - .EXPORT bn_sqr_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .entry - .align 64 - - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - NOP - STD %r5,16(%sp) ; save r5 - - CMPIB,>= 0,num,bn_sqr_words_exit - LDO 128(%sp),%sp ; bump stack - - ; - ; If only 1, the goto straight to cleanup - ; - CMPIB,= 1,num,bn_sqr_words_single_top - DEPDI,Z -1,32,33,high_mask ; Create Mask 0xffffffff80000000L - - ; - ; This loop is unrolled 2 times (64-byte aligned as well) - ; - -bn_sqr_words_unroll2 - FLDD 0(a_ptr),t_float_0 ; a[0] - FLDD 8(a_ptr),t_float_1 ; a[1] - XMPYU fht_0,flt_0,fm ; m[0] - XMPYU fht_1,flt_1,fm_1 ; m[1] - - FSTD fm,-24(%sp) ; store m[0] - FSTD fm_1,-56(%sp) ; store m[1] - XMPYU flt_0,flt_0,lt_temp ; lt[0] - XMPYU flt_1,flt_1,lt_temp_1 ; lt[1] - - FSTD lt_temp,-16(%sp) ; store lt[0] - FSTD lt_temp_1,-48(%sp) ; store lt[1] - XMPYU fht_0,fht_0,ht_temp ; ht[0] - XMPYU fht_1,fht_1,ht_temp_1 ; ht[1] - - FSTD ht_temp,-8(%sp) ; store ht[0] - FSTD ht_temp_1,-40(%sp) ; store ht[1] - LDD -24(%sp),m_0 - LDD -56(%sp),m_1 - - AND m_0,high_mask,tmp_0 ; m[0] & Mask - AND m_1,high_mask,tmp_1 ; m[1] & Mask - DEPD,Z m_0,30,31,m_0 ; m[0] << 32+1 - DEPD,Z m_1,30,31,m_1 ; m[1] << 32+1 - - LDD -16(%sp),lt_0 - LDD -48(%sp),lt_1 - EXTRD,U tmp_0,32,33,tmp_0 ; tmp_0 = m[0]&Mask >> 32-1 - EXTRD,U tmp_1,32,33,tmp_1 ; tmp_1 = m[1]&Mask >> 32-1 - - LDD -8(%sp),ht_0 - LDD -40(%sp),ht_1 - ADD,L ht_0,tmp_0,ht_0 ; ht[0] += tmp_0 - ADD,L ht_1,tmp_1,ht_1 ; ht[1] += tmp_1 - - ADD lt_0,m_0,lt_0 ; lt = lt+m - ADD,DC ht_0,%r0,ht_0 ; ht[0]++ - STD lt_0,0(r_ptr) ; rp[0] = lt[0] - STD ht_0,8(r_ptr) ; rp[1] = ht[1] - - ADD lt_1,m_1,lt_1 ; lt = lt+m - ADD,DC ht_1,%r0,ht_1 ; ht[1]++ - STD lt_1,16(r_ptr) ; rp[2] = lt[1] - STD ht_1,24(r_ptr) ; rp[3] = ht[1] - - LDO -2(num),num ; num = num - 2; - LDO 16(a_ptr),a_ptr ; ap += 2 - CMPIB,<= 2,num,bn_sqr_words_unroll2 - LDO 32(r_ptr),r_ptr ; rp += 4 - - CMPIB,=,N 0,num,bn_sqr_words_exit ; are we done? - - ; - ; Top of loop aligned on 64-byte boundary - ; -bn_sqr_words_single_top - FLDD 0(a_ptr),t_float_0 ; load up 64-bit value (fr8L) ht(L)/lt(R) - - XMPYU fht_0,flt_0,fm ; m - FSTD fm,-24(%sp) ; store m - - XMPYU flt_0,flt_0,lt_temp ; lt - FSTD lt_temp,-16(%sp) ; store lt - - XMPYU fht_0,fht_0,ht_temp ; ht - FSTD ht_temp,-8(%sp) ; store ht - - LDD -24(%sp),m_0 ; load m - AND m_0,high_mask,tmp_0 ; m & Mask - DEPD,Z m_0,30,31,m_0 ; m << 32+1 - LDD -16(%sp),lt_0 ; lt - - LDD -8(%sp),ht_0 ; ht - EXTRD,U tmp_0,32,33,tmp_0 ; tmp_0 = m&Mask >> 32-1 - ADD m_0,lt_0,lt_0 ; lt = lt+m - ADD,L ht_0,tmp_0,ht_0 ; ht += tmp_0 - ADD,DC ht_0,%r0,ht_0 ; ht++ - - STD lt_0,0(r_ptr) ; rp[0] = lt - STD ht_0,8(r_ptr) ; rp[1] = ht - -bn_sqr_words_exit - .EXIT - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 - .PROCEND ;in=23,24,25,26,29;out=28; - - -;---------------------------------------------------------------------------- -; -;BN_ULONG bn_add_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n) -; -; arg0 = rp -; arg1 = ap -; arg2 = bp -; arg3 = n - -t .reg %r22 -b .reg %r21 -l .reg %r20 - -bn_add_words - .proc - .entry - .callinfo - .EXPORT bn_add_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .align 64 - - CMPIB,>= 0,n,bn_add_words_exit - COPY %r0,%ret1 ; return 0 by default - - ; - ; If 2 or more numbers do the loop - ; - CMPIB,= 1,n,bn_add_words_single_top - NOP - - ; - ; This loop is unrolled 2 times (64-byte aligned as well) - ; -bn_add_words_unroll2 - LDD 0(a_ptr),t - LDD 0(b_ptr),b - ADD t,%ret1,t ; t = t+c; - ADD,DC %r0,%r0,%ret1 ; set c to carry - ADD t,b,l ; l = t + b[0] - ADD,DC %ret1,%r0,%ret1 ; c+= carry - STD l,0(r_ptr) - - LDD 8(a_ptr),t - LDD 8(b_ptr),b - ADD t,%ret1,t ; t = t+c; - ADD,DC %r0,%r0,%ret1 ; set c to carry - ADD t,b,l ; l = t + b[0] - ADD,DC %ret1,%r0,%ret1 ; c+= carry - STD l,8(r_ptr) - - LDO -2(n),n - LDO 16(a_ptr),a_ptr - LDO 16(b_ptr),b_ptr - - CMPIB,<= 2,n,bn_add_words_unroll2 - LDO 16(r_ptr),r_ptr - - CMPIB,=,N 0,n,bn_add_words_exit ; are we done? - -bn_add_words_single_top - LDD 0(a_ptr),t - LDD 0(b_ptr),b - - ADD t,%ret1,t ; t = t+c; - ADD,DC %r0,%r0,%ret1 ; set c to carry (could use CMPCLR??) - ADD t,b,l ; l = t + b[0] - ADD,DC %ret1,%r0,%ret1 ; c+= carry - STD l,0(r_ptr) - -bn_add_words_exit - .EXIT - BVE (%rp) - EXTRD,U %ret1,31,32,%ret0 ; for 32-bit, return in ret0/ret1 - .PROCEND ;in=23,24,25,26,29;out=28; - -;---------------------------------------------------------------------------- -; -;BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n) -; -; arg0 = rp -; arg1 = ap -; arg2 = bp -; arg3 = n - -t1 .reg %r22 -t2 .reg %r21 -sub_tmp1 .reg %r20 -sub_tmp2 .reg %r19 - - -bn_sub_words - .proc - .callinfo - .EXPORT bn_sub_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .entry - .align 64 - - CMPIB,>= 0,n,bn_sub_words_exit - COPY %r0,%ret1 ; return 0 by default - - ; - ; If 2 or more numbers do the loop - ; - CMPIB,= 1,n,bn_sub_words_single_top - NOP - - ; - ; This loop is unrolled 2 times (64-byte aligned as well) - ; -bn_sub_words_unroll2 - LDD 0(a_ptr),t1 - LDD 0(b_ptr),t2 - SUB t1,t2,sub_tmp1 ; t3 = t1-t2; - SUB sub_tmp1,%ret1,sub_tmp1 ; t3 = t3- c; - - CMPCLR,*>> t1,t2,sub_tmp2 ; clear if t1 > t2 - LDO 1(%r0),sub_tmp2 - - CMPCLR,*= t1,t2,%r0 - COPY sub_tmp2,%ret1 - STD sub_tmp1,0(r_ptr) - - LDD 8(a_ptr),t1 - LDD 8(b_ptr),t2 - SUB t1,t2,sub_tmp1 ; t3 = t1-t2; - SUB sub_tmp1,%ret1,sub_tmp1 ; t3 = t3- c; - CMPCLR,*>> t1,t2,sub_tmp2 ; clear if t1 > t2 - LDO 1(%r0),sub_tmp2 - - CMPCLR,*= t1,t2,%r0 - COPY sub_tmp2,%ret1 - STD sub_tmp1,8(r_ptr) - - LDO -2(n),n - LDO 16(a_ptr),a_ptr - LDO 16(b_ptr),b_ptr - - CMPIB,<= 2,n,bn_sub_words_unroll2 - LDO 16(r_ptr),r_ptr - - CMPIB,=,N 0,n,bn_sub_words_exit ; are we done? - -bn_sub_words_single_top - LDD 0(a_ptr),t1 - LDD 0(b_ptr),t2 - SUB t1,t2,sub_tmp1 ; t3 = t1-t2; - SUB sub_tmp1,%ret1,sub_tmp1 ; t3 = t3- c; - CMPCLR,*>> t1,t2,sub_tmp2 ; clear if t1 > t2 - LDO 1(%r0),sub_tmp2 - - CMPCLR,*= t1,t2,%r0 - COPY sub_tmp2,%ret1 - - STD sub_tmp1,0(r_ptr) - -bn_sub_words_exit - .EXIT - BVE (%rp) - EXTRD,U %ret1,31,32,%ret0 ; for 32-bit, return in ret0/ret1 - .PROCEND ;in=23,24,25,26,29;out=28; - -;------------------------------------------------------------------------------ -; -; unsigned long bn_div_words(unsigned long h, unsigned long l, unsigned long d) -; -; arg0 = h -; arg1 = l -; arg2 = d -; -; This is mainly just output from the HP C compiler. -; -;------------------------------------------------------------------------------ -bn_div_words - .PROC - .EXPORT bn_div_words,ENTRY,PRIV_LEV=3,ARGW0=GR,ARGW1=GR,ARGW2=GR,ARGW3=GR,RTNVAL=GR,LONG_RETURN - .IMPORT BN_num_bits_word,CODE - ;--- not PIC .IMPORT __iob,DATA - ;--- not PIC .IMPORT fprintf,CODE - .IMPORT abort,CODE - .IMPORT $$div2U,MILLICODE - .CALLINFO CALLER,FRAME=144,ENTRY_GR=%r9,SAVE_RP,ARGS_SAVED,ORDERING_AWARE - .ENTRY - STW %r2,-20(%r30) ;offset 0x8ec - STW,MA %r3,192(%r30) ;offset 0x8f0 - STW %r4,-188(%r30) ;offset 0x8f4 - DEPD %r5,31,32,%r6 ;offset 0x8f8 - STD %r6,-184(%r30) ;offset 0x8fc - DEPD %r7,31,32,%r8 ;offset 0x900 - STD %r8,-176(%r30) ;offset 0x904 - STW %r9,-168(%r30) ;offset 0x908 - LDD -248(%r30),%r3 ;offset 0x90c - COPY %r26,%r4 ;offset 0x910 - COPY %r24,%r5 ;offset 0x914 - DEPD %r25,31,32,%r4 ;offset 0x918 - CMPB,*<> %r3,%r0,$0006000C ;offset 0x91c - DEPD %r23,31,32,%r5 ;offset 0x920 - MOVIB,TR -1,%r29,$00060002 ;offset 0x924 - EXTRD,U %r29,31,32,%r28 ;offset 0x928 -$0006002A - LDO -1(%r29),%r29 ;offset 0x92c - SUB %r23,%r7,%r23 ;offset 0x930 -$00060024 - SUB %r4,%r31,%r25 ;offset 0x934 - AND %r25,%r19,%r26 ;offset 0x938 - CMPB,*<>,N %r0,%r26,$00060046 ;offset 0x93c - DEPD,Z %r25,31,32,%r20 ;offset 0x940 - OR %r20,%r24,%r21 ;offset 0x944 - CMPB,*<<,N %r21,%r23,$0006002A ;offset 0x948 - SUB %r31,%r2,%r31 ;offset 0x94c -$00060046 -$0006002E - DEPD,Z %r23,31,32,%r25 ;offset 0x950 - EXTRD,U %r23,31,32,%r26 ;offset 0x954 - AND %r25,%r19,%r24 ;offset 0x958 - ADD,L %r31,%r26,%r31 ;offset 0x95c - CMPCLR,*>>= %r5,%r24,%r0 ;offset 0x960 - LDO 1(%r31),%r31 ;offset 0x964 -$00060032 - CMPB,*<<=,N %r31,%r4,$00060036 ;offset 0x968 - LDO -1(%r29),%r29 ;offset 0x96c - ADD,L %r4,%r3,%r4 ;offset 0x970 -$00060036 - ADDIB,=,N -1,%r8,$D0 ;offset 0x974 - SUB %r5,%r24,%r28 ;offset 0x978 -$0006003A - SUB %r4,%r31,%r24 ;offset 0x97c - SHRPD %r24,%r28,32,%r4 ;offset 0x980 - DEPD,Z %r29,31,32,%r9 ;offset 0x984 - DEPD,Z %r28,31,32,%r5 ;offset 0x988 -$0006001C - EXTRD,U %r4,31,32,%r31 ;offset 0x98c - CMPB,*<>,N %r31,%r2,$00060020 ;offset 0x990 - MOVB,TR %r6,%r29,$D1 ;offset 0x994 - STD %r29,-152(%r30) ;offset 0x998 -$0006000C - EXTRD,U %r3,31,32,%r25 ;offset 0x99c - COPY %r3,%r26 ;offset 0x9a0 - EXTRD,U %r3,31,32,%r9 ;offset 0x9a4 - EXTRD,U %r4,31,32,%r8 ;offset 0x9a8 - .CALL ARGW0=GR,ARGW1=GR,RTNVAL=GR ;in=25,26;out=28; - B,L BN_num_bits_word,%r2 ;offset 0x9ac - EXTRD,U %r5,31,32,%r7 ;offset 0x9b0 - LDI 64,%r20 ;offset 0x9b4 - DEPD %r7,31,32,%r5 ;offset 0x9b8 - DEPD %r8,31,32,%r4 ;offset 0x9bc - DEPD %r9,31,32,%r3 ;offset 0x9c0 - CMPB,= %r28,%r20,$00060012 ;offset 0x9c4 - COPY %r28,%r24 ;offset 0x9c8 - MTSARCM %r24 ;offset 0x9cc - DEPDI,Z -1,%sar,1,%r19 ;offset 0x9d0 - CMPB,*>>,N %r4,%r19,$D2 ;offset 0x9d4 -$00060012 - SUBI 64,%r24,%r31 ;offset 0x9d8 - CMPCLR,*<< %r4,%r3,%r0 ;offset 0x9dc - SUB %r4,%r3,%r4 ;offset 0x9e0 -$00060016 - CMPB,= %r31,%r0,$0006001A ;offset 0x9e4 - COPY %r0,%r9 ;offset 0x9e8 - MTSARCM %r31 ;offset 0x9ec - DEPD,Z %r3,%sar,64,%r3 ;offset 0x9f0 - SUBI 64,%r31,%r26 ;offset 0x9f4 - MTSAR %r26 ;offset 0x9f8 - SHRPD %r4,%r5,%sar,%r4 ;offset 0x9fc - MTSARCM %r31 ;offset 0xa00 - DEPD,Z %r5,%sar,64,%r5 ;offset 0xa04 -$0006001A - DEPDI,Z -1,31,32,%r19 ;offset 0xa08 - AND %r3,%r19,%r29 ;offset 0xa0c - EXTRD,U %r29,31,32,%r2 ;offset 0xa10 - DEPDI,Z -1,63,32,%r6 ;offset 0xa14 - MOVIB,TR 2,%r8,$0006001C ;offset 0xa18 - EXTRD,U %r3,63,32,%r7 ;offset 0xa1c -$D2 - ;--- not PIC ADDIL LR'__iob-$global$,%r27,%r1 ;offset 0xa20 - ;--- not PIC LDIL LR'C$7,%r21 ;offset 0xa24 - ;--- not PIC LDO RR'__iob-$global$+32(%r1),%r26 ;offset 0xa28 - ;--- not PIC .CALL ARGW0=GR,ARGW1=GR,ARGW2=GR,RTNVAL=GR ;in=24,25,26;out=28; - ;--- not PIC B,L fprintf,%r2 ;offset 0xa2c - ;--- not PIC LDO RR'C$7(%r21),%r25 ;offset 0xa30 - .CALL ; - B,L abort,%r2 ;offset 0xa34 - NOP ;offset 0xa38 - B $D3 ;offset 0xa3c - LDW -212(%r30),%r2 ;offset 0xa40 -$00060020 - COPY %r4,%r26 ;offset 0xa44 - EXTRD,U %r4,31,32,%r25 ;offset 0xa48 - COPY %r2,%r24 ;offset 0xa4c - .CALL ;in=23,24,25,26;out=20,21,22,28,29; (MILLICALL) - B,L $$div2U,%r31 ;offset 0xa50 - EXTRD,U %r2,31,32,%r23 ;offset 0xa54 - DEPD %r28,31,32,%r29 ;offset 0xa58 -$00060022 - STD %r29,-152(%r30) ;offset 0xa5c -$D1 - AND %r5,%r19,%r24 ;offset 0xa60 - EXTRD,U %r24,31,32,%r24 ;offset 0xa64 - STW %r2,-160(%r30) ;offset 0xa68 - STW %r7,-128(%r30) ;offset 0xa6c - FLDD -152(%r30),%fr4 ;offset 0xa70 - FLDD -152(%r30),%fr7 ;offset 0xa74 - FLDW -160(%r30),%fr8L ;offset 0xa78 - FLDW -128(%r30),%fr5L ;offset 0xa7c - XMPYU %fr8L,%fr7L,%fr10 ;offset 0xa80 - FSTD %fr10,-136(%r30) ;offset 0xa84 - XMPYU %fr8L,%fr7R,%fr22 ;offset 0xa88 - FSTD %fr22,-144(%r30) ;offset 0xa8c - XMPYU %fr5L,%fr4L,%fr11 ;offset 0xa90 - XMPYU %fr5L,%fr4R,%fr23 ;offset 0xa94 - FSTD %fr11,-112(%r30) ;offset 0xa98 - FSTD %fr23,-120(%r30) ;offset 0xa9c - LDD -136(%r30),%r28 ;offset 0xaa0 - DEPD,Z %r28,31,32,%r31 ;offset 0xaa4 - LDD -144(%r30),%r20 ;offset 0xaa8 - ADD,L %r20,%r31,%r31 ;offset 0xaac - LDD -112(%r30),%r22 ;offset 0xab0 - DEPD,Z %r22,31,32,%r22 ;offset 0xab4 - LDD -120(%r30),%r21 ;offset 0xab8 - B $00060024 ;offset 0xabc - ADD,L %r21,%r22,%r23 ;offset 0xac0 -$D0 - OR %r9,%r29,%r29 ;offset 0xac4 -$00060040 - EXTRD,U %r29,31,32,%r28 ;offset 0xac8 -$00060002 -$L2 - LDW -212(%r30),%r2 ;offset 0xacc -$D3 - LDW -168(%r30),%r9 ;offset 0xad0 - LDD -176(%r30),%r8 ;offset 0xad4 - EXTRD,U %r8,31,32,%r7 ;offset 0xad8 - LDD -184(%r30),%r6 ;offset 0xadc - EXTRD,U %r6,31,32,%r5 ;offset 0xae0 - LDW -188(%r30),%r4 ;offset 0xae4 - BVE (%r2) ;offset 0xae8 - .EXIT - LDW,MB -192(%r30),%r3 ;offset 0xaec - .PROCEND ;in=23,25;out=28,29;fpin=105,107; - - - - -;---------------------------------------------------------------------------- -; -; Registers to hold 64-bit values to manipulate. The "L" part -; of the register corresponds to the upper 32-bits, while the "R" -; part corresponds to the lower 32-bits -; -; Note, that when using b6 and b7, the code must save these before -; using them because they are callee save registers -; -; -; Floating point registers to use to save values that -; are manipulated. These don't collide with ftemp1-6 and -; are all caller save registers -; -a0 .reg %fr22 -a0L .reg %fr22L -a0R .reg %fr22R - -a1 .reg %fr23 -a1L .reg %fr23L -a1R .reg %fr23R - -a2 .reg %fr24 -a2L .reg %fr24L -a2R .reg %fr24R - -a3 .reg %fr25 -a3L .reg %fr25L -a3R .reg %fr25R - -a4 .reg %fr26 -a4L .reg %fr26L -a4R .reg %fr26R - -a5 .reg %fr27 -a5L .reg %fr27L -a5R .reg %fr27R - -a6 .reg %fr28 -a6L .reg %fr28L -a6R .reg %fr28R - -a7 .reg %fr29 -a7L .reg %fr29L -a7R .reg %fr29R - -b0 .reg %fr30 -b0L .reg %fr30L -b0R .reg %fr30R - -b1 .reg %fr31 -b1L .reg %fr31L -b1R .reg %fr31R - -; -; Temporary floating point variables, these are all caller save -; registers -; -ftemp1 .reg %fr4 -ftemp2 .reg %fr5 -ftemp3 .reg %fr6 -ftemp4 .reg %fr7 - -; -; The B set of registers when used. -; - -b2 .reg %fr8 -b2L .reg %fr8L -b2R .reg %fr8R - -b3 .reg %fr9 -b3L .reg %fr9L -b3R .reg %fr9R - -b4 .reg %fr10 -b4L .reg %fr10L -b4R .reg %fr10R - -b5 .reg %fr11 -b5L .reg %fr11L -b5R .reg %fr11R - -b6 .reg %fr12 -b6L .reg %fr12L -b6R .reg %fr12R - -b7 .reg %fr13 -b7L .reg %fr13L -b7R .reg %fr13R - -c1 .reg %r21 ; only reg -temp1 .reg %r20 ; only reg -temp2 .reg %r19 ; only reg -temp3 .reg %r31 ; only reg - -m1 .reg %r28 -c2 .reg %r23 -high_one .reg %r1 -ht .reg %r6 -lt .reg %r5 -m .reg %r4 -c3 .reg %r3 - -SQR_ADD_C .macro A0L,A0R,C1,C2,C3 - XMPYU A0L,A0R,ftemp1 ; m - FSTD ftemp1,-24(%sp) ; store m - - XMPYU A0R,A0R,ftemp2 ; lt - FSTD ftemp2,-16(%sp) ; store lt - - XMPYU A0L,A0L,ftemp3 ; ht - FSTD ftemp3,-8(%sp) ; store ht - - LDD -24(%sp),m ; load m - AND m,high_mask,temp2 ; m & Mask - DEPD,Z m,30,31,temp3 ; m << 32+1 - LDD -16(%sp),lt ; lt - - LDD -8(%sp),ht ; ht - EXTRD,U temp2,32,33,temp1 ; temp1 = m&Mask >> 32-1 - ADD temp3,lt,lt ; lt = lt+m - ADD,L ht,temp1,ht ; ht += temp1 - ADD,DC ht,%r0,ht ; ht++ - - ADD C1,lt,C1 ; c1=c1+lt - ADD,DC ht,%r0,ht ; ht++ - - ADD C2,ht,C2 ; c2=c2+ht - ADD,DC C3,%r0,C3 ; c3++ -.endm - -SQR_ADD_C2 .macro A0L,A0R,A1L,A1R,C1,C2,C3 - XMPYU A0L,A1R,ftemp1 ; m1 = bl*ht - FSTD ftemp1,-16(%sp) ; - XMPYU A0R,A1L,ftemp2 ; m = bh*lt - FSTD ftemp2,-8(%sp) ; - XMPYU A0R,A1R,ftemp3 ; lt = bl*lt - FSTD ftemp3,-32(%sp) - XMPYU A0L,A1L,ftemp4 ; ht = bh*ht - FSTD ftemp4,-24(%sp) ; - - LDD -8(%sp),m ; r21 = m - LDD -16(%sp),m1 ; r19 = m1 - ADD,L m,m1,m ; m+m1 - - DEPD,Z m,31,32,temp3 ; (m+m1<<32) - LDD -24(%sp),ht ; r24 = ht - - CMPCLR,*>>= m,m1,%r0 ; if (m < m1) - ADD,L ht,high_one,ht ; ht+=high_one - - EXTRD,U m,31,32,temp1 ; m >> 32 - LDD -32(%sp),lt ; lt - ADD,L ht,temp1,ht ; ht+= m>>32 - ADD lt,temp3,lt ; lt = lt+m1 - ADD,DC ht,%r0,ht ; ht++ - - ADD ht,ht,ht ; ht=ht+ht; - ADD,DC C3,%r0,C3 ; add in carry (c3++) - - ADD lt,lt,lt ; lt=lt+lt; - ADD,DC ht,%r0,ht ; add in carry (ht++) - - ADD C1,lt,C1 ; c1=c1+lt - ADD,DC,*NUV ht,%r0,ht ; add in carry (ht++) - LDO 1(C3),C3 ; bump c3 if overflow,nullify otherwise - - ADD C2,ht,C2 ; c2 = c2 + ht - ADD,DC C3,%r0,C3 ; add in carry (c3++) -.endm - -; -;void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a) -; arg0 = r_ptr -; arg1 = a_ptr -; - -bn_sqr_comba8 - .PROC - .CALLINFO FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE - .EXPORT bn_sqr_comba8,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .ENTRY - .align 64 - - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - STD %r5,16(%sp) ; save r5 - STD %r6,24(%sp) ; save r6 - - ; - ; Zero out carries - ; - COPY %r0,c1 - COPY %r0,c2 - COPY %r0,c3 - - LDO 128(%sp),%sp ; bump stack - DEPDI,Z -1,32,33,high_mask ; Create Mask 0xffffffff80000000L - DEPDI,Z 1,31,1,high_one ; Create Value 1 << 32 - - ; - ; Load up all of the values we are going to use - ; - FLDD 0(a_ptr),a0 - FLDD 8(a_ptr),a1 - FLDD 16(a_ptr),a2 - FLDD 24(a_ptr),a3 - FLDD 32(a_ptr),a4 - FLDD 40(a_ptr),a5 - FLDD 48(a_ptr),a6 - FLDD 56(a_ptr),a7 - - SQR_ADD_C a0L,a0R,c1,c2,c3 - STD c1,0(r_ptr) ; r[0] = c1; - COPY %r0,c1 - - SQR_ADD_C2 a1L,a1R,a0L,a0R,c2,c3,c1 - STD c2,8(r_ptr) ; r[1] = c2; - COPY %r0,c2 - - SQR_ADD_C a1L,a1R,c3,c1,c2 - SQR_ADD_C2 a2L,a2R,a0L,a0R,c3,c1,c2 - STD c3,16(r_ptr) ; r[2] = c3; - COPY %r0,c3 - - SQR_ADD_C2 a3L,a3R,a0L,a0R,c1,c2,c3 - SQR_ADD_C2 a2L,a2R,a1L,a1R,c1,c2,c3 - STD c1,24(r_ptr) ; r[3] = c1; - COPY %r0,c1 - - SQR_ADD_C a2L,a2R,c2,c3,c1 - SQR_ADD_C2 a3L,a3R,a1L,a1R,c2,c3,c1 - SQR_ADD_C2 a4L,a4R,a0L,a0R,c2,c3,c1 - STD c2,32(r_ptr) ; r[4] = c2; - COPY %r0,c2 - - SQR_ADD_C2 a5L,a5R,a0L,a0R,c3,c1,c2 - SQR_ADD_C2 a4L,a4R,a1L,a1R,c3,c1,c2 - SQR_ADD_C2 a3L,a3R,a2L,a2R,c3,c1,c2 - STD c3,40(r_ptr) ; r[5] = c3; - COPY %r0,c3 - - SQR_ADD_C a3L,a3R,c1,c2,c3 - SQR_ADD_C2 a4L,a4R,a2L,a2R,c1,c2,c3 - SQR_ADD_C2 a5L,a5R,a1L,a1R,c1,c2,c3 - SQR_ADD_C2 a6L,a6R,a0L,a0R,c1,c2,c3 - STD c1,48(r_ptr) ; r[6] = c1; - COPY %r0,c1 - - SQR_ADD_C2 a7L,a7R,a0L,a0R,c2,c3,c1 - SQR_ADD_C2 a6L,a6R,a1L,a1R,c2,c3,c1 - SQR_ADD_C2 a5L,a5R,a2L,a2R,c2,c3,c1 - SQR_ADD_C2 a4L,a4R,a3L,a3R,c2,c3,c1 - STD c2,56(r_ptr) ; r[7] = c2; - COPY %r0,c2 - - SQR_ADD_C a4L,a4R,c3,c1,c2 - SQR_ADD_C2 a5L,a5R,a3L,a3R,c3,c1,c2 - SQR_ADD_C2 a6L,a6R,a2L,a2R,c3,c1,c2 - SQR_ADD_C2 a7L,a7R,a1L,a1R,c3,c1,c2 - STD c3,64(r_ptr) ; r[8] = c3; - COPY %r0,c3 - - SQR_ADD_C2 a7L,a7R,a2L,a2R,c1,c2,c3 - SQR_ADD_C2 a6L,a6R,a3L,a3R,c1,c2,c3 - SQR_ADD_C2 a5L,a5R,a4L,a4R,c1,c2,c3 - STD c1,72(r_ptr) ; r[9] = c1; - COPY %r0,c1 - - SQR_ADD_C a5L,a5R,c2,c3,c1 - SQR_ADD_C2 a6L,a6R,a4L,a4R,c2,c3,c1 - SQR_ADD_C2 a7L,a7R,a3L,a3R,c2,c3,c1 - STD c2,80(r_ptr) ; r[10] = c2; - COPY %r0,c2 - - SQR_ADD_C2 a7L,a7R,a4L,a4R,c3,c1,c2 - SQR_ADD_C2 a6L,a6R,a5L,a5R,c3,c1,c2 - STD c3,88(r_ptr) ; r[11] = c3; - COPY %r0,c3 - - SQR_ADD_C a6L,a6R,c1,c2,c3 - SQR_ADD_C2 a7L,a7R,a5L,a5R,c1,c2,c3 - STD c1,96(r_ptr) ; r[12] = c1; - COPY %r0,c1 - - SQR_ADD_C2 a7L,a7R,a6L,a6R,c2,c3,c1 - STD c2,104(r_ptr) ; r[13] = c2; - COPY %r0,c2 - - SQR_ADD_C a7L,a7R,c3,c1,c2 - STD c3, 112(r_ptr) ; r[14] = c3 - STD c1, 120(r_ptr) ; r[15] = c1 - - .EXIT - LDD -104(%sp),%r6 ; restore r6 - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 - - .PROCEND - -;----------------------------------------------------------------------------- -; -;void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a) -; arg0 = r_ptr -; arg1 = a_ptr -; - -bn_sqr_comba4 - .proc - .callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE - .EXPORT bn_sqr_comba4,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .entry - .align 64 - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - STD %r5,16(%sp) ; save r5 - STD %r6,24(%sp) ; save r6 - - ; - ; Zero out carries - ; - COPY %r0,c1 - COPY %r0,c2 - COPY %r0,c3 - - LDO 128(%sp),%sp ; bump stack - DEPDI,Z -1,32,33,high_mask ; Create Mask 0xffffffff80000000L - DEPDI,Z 1,31,1,high_one ; Create Value 1 << 32 - - ; - ; Load up all of the values we are going to use - ; - FLDD 0(a_ptr),a0 - FLDD 8(a_ptr),a1 - FLDD 16(a_ptr),a2 - FLDD 24(a_ptr),a3 - FLDD 32(a_ptr),a4 - FLDD 40(a_ptr),a5 - FLDD 48(a_ptr),a6 - FLDD 56(a_ptr),a7 - - SQR_ADD_C a0L,a0R,c1,c2,c3 - - STD c1,0(r_ptr) ; r[0] = c1; - COPY %r0,c1 - - SQR_ADD_C2 a1L,a1R,a0L,a0R,c2,c3,c1 - - STD c2,8(r_ptr) ; r[1] = c2; - COPY %r0,c2 - - SQR_ADD_C a1L,a1R,c3,c1,c2 - SQR_ADD_C2 a2L,a2R,a0L,a0R,c3,c1,c2 - - STD c3,16(r_ptr) ; r[2] = c3; - COPY %r0,c3 - - SQR_ADD_C2 a3L,a3R,a0L,a0R,c1,c2,c3 - SQR_ADD_C2 a2L,a2R,a1L,a1R,c1,c2,c3 - - STD c1,24(r_ptr) ; r[3] = c1; - COPY %r0,c1 - - SQR_ADD_C a2L,a2R,c2,c3,c1 - SQR_ADD_C2 a3L,a3R,a1L,a1R,c2,c3,c1 - - STD c2,32(r_ptr) ; r[4] = c2; - COPY %r0,c2 - - SQR_ADD_C2 a3L,a3R,a2L,a2R,c3,c1,c2 - STD c3,40(r_ptr) ; r[5] = c3; - COPY %r0,c3 - - SQR_ADD_C a3L,a3R,c1,c2,c3 - STD c1,48(r_ptr) ; r[6] = c1; - STD c2,56(r_ptr) ; r[7] = c2; - - .EXIT - LDD -104(%sp),%r6 ; restore r6 - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 - - .PROCEND - - -;--------------------------------------------------------------------------- - -MUL_ADD_C .macro A0L,A0R,B0L,B0R,C1,C2,C3 - XMPYU A0L,B0R,ftemp1 ; m1 = bl*ht - FSTD ftemp1,-16(%sp) ; - XMPYU A0R,B0L,ftemp2 ; m = bh*lt - FSTD ftemp2,-8(%sp) ; - XMPYU A0R,B0R,ftemp3 ; lt = bl*lt - FSTD ftemp3,-32(%sp) - XMPYU A0L,B0L,ftemp4 ; ht = bh*ht - FSTD ftemp4,-24(%sp) ; - - LDD -8(%sp),m ; r21 = m - LDD -16(%sp),m1 ; r19 = m1 - ADD,L m,m1,m ; m+m1 - - DEPD,Z m,31,32,temp3 ; (m+m1<<32) - LDD -24(%sp),ht ; r24 = ht - - CMPCLR,*>>= m,m1,%r0 ; if (m < m1) - ADD,L ht,high_one,ht ; ht+=high_one - - EXTRD,U m,31,32,temp1 ; m >> 32 - LDD -32(%sp),lt ; lt - ADD,L ht,temp1,ht ; ht+= m>>32 - ADD lt,temp3,lt ; lt = lt+m1 - ADD,DC ht,%r0,ht ; ht++ - - ADD C1,lt,C1 ; c1=c1+lt - ADD,DC ht,%r0,ht ; bump c3 if overflow,nullify otherwise - - ADD C2,ht,C2 ; c2 = c2 + ht - ADD,DC C3,%r0,C3 ; add in carry (c3++) -.endm - - -; -;void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) -; arg0 = r_ptr -; arg1 = a_ptr -; arg2 = b_ptr -; - -bn_mul_comba8 - .proc - .callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE - .EXPORT bn_mul_comba8,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .entry - .align 64 - - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - STD %r5,16(%sp) ; save r5 - STD %r6,24(%sp) ; save r6 - FSTD %fr12,32(%sp) ; save r6 - FSTD %fr13,40(%sp) ; save r7 - - ; - ; Zero out carries - ; - COPY %r0,c1 - COPY %r0,c2 - COPY %r0,c3 - - LDO 128(%sp),%sp ; bump stack - DEPDI,Z 1,31,1,high_one ; Create Value 1 << 32 - - ; - ; Load up all of the values we are going to use - ; - FLDD 0(a_ptr),a0 - FLDD 8(a_ptr),a1 - FLDD 16(a_ptr),a2 - FLDD 24(a_ptr),a3 - FLDD 32(a_ptr),a4 - FLDD 40(a_ptr),a5 - FLDD 48(a_ptr),a6 - FLDD 56(a_ptr),a7 - - FLDD 0(b_ptr),b0 - FLDD 8(b_ptr),b1 - FLDD 16(b_ptr),b2 - FLDD 24(b_ptr),b3 - FLDD 32(b_ptr),b4 - FLDD 40(b_ptr),b5 - FLDD 48(b_ptr),b6 - FLDD 56(b_ptr),b7 - - MUL_ADD_C a0L,a0R,b0L,b0R,c1,c2,c3 - STD c1,0(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a0L,a0R,b1L,b1R,c2,c3,c1 - MUL_ADD_C a1L,a1R,b0L,b0R,c2,c3,c1 - STD c2,8(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a2L,a2R,b0L,b0R,c3,c1,c2 - MUL_ADD_C a1L,a1R,b1L,b1R,c3,c1,c2 - MUL_ADD_C a0L,a0R,b2L,b2R,c3,c1,c2 - STD c3,16(r_ptr) - COPY %r0,c3 - - MUL_ADD_C a0L,a0R,b3L,b3R,c1,c2,c3 - MUL_ADD_C a1L,a1R,b2L,b2R,c1,c2,c3 - MUL_ADD_C a2L,a2R,b1L,b1R,c1,c2,c3 - MUL_ADD_C a3L,a3R,b0L,b0R,c1,c2,c3 - STD c1,24(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a4L,a4R,b0L,b0R,c2,c3,c1 - MUL_ADD_C a3L,a3R,b1L,b1R,c2,c3,c1 - MUL_ADD_C a2L,a2R,b2L,b2R,c2,c3,c1 - MUL_ADD_C a1L,a1R,b3L,b3R,c2,c3,c1 - MUL_ADD_C a0L,a0R,b4L,b4R,c2,c3,c1 - STD c2,32(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a0L,a0R,b5L,b5R,c3,c1,c2 - MUL_ADD_C a1L,a1R,b4L,b4R,c3,c1,c2 - MUL_ADD_C a2L,a2R,b3L,b3R,c3,c1,c2 - MUL_ADD_C a3L,a3R,b2L,b2R,c3,c1,c2 - MUL_ADD_C a4L,a4R,b1L,b1R,c3,c1,c2 - MUL_ADD_C a5L,a5R,b0L,b0R,c3,c1,c2 - STD c3,40(r_ptr) - COPY %r0,c3 - - MUL_ADD_C a6L,a6R,b0L,b0R,c1,c2,c3 - MUL_ADD_C a5L,a5R,b1L,b1R,c1,c2,c3 - MUL_ADD_C a4L,a4R,b2L,b2R,c1,c2,c3 - MUL_ADD_C a3L,a3R,b3L,b3R,c1,c2,c3 - MUL_ADD_C a2L,a2R,b4L,b4R,c1,c2,c3 - MUL_ADD_C a1L,a1R,b5L,b5R,c1,c2,c3 - MUL_ADD_C a0L,a0R,b6L,b6R,c1,c2,c3 - STD c1,48(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a0L,a0R,b7L,b7R,c2,c3,c1 - MUL_ADD_C a1L,a1R,b6L,b6R,c2,c3,c1 - MUL_ADD_C a2L,a2R,b5L,b5R,c2,c3,c1 - MUL_ADD_C a3L,a3R,b4L,b4R,c2,c3,c1 - MUL_ADD_C a4L,a4R,b3L,b3R,c2,c3,c1 - MUL_ADD_C a5L,a5R,b2L,b2R,c2,c3,c1 - MUL_ADD_C a6L,a6R,b1L,b1R,c2,c3,c1 - MUL_ADD_C a7L,a7R,b0L,b0R,c2,c3,c1 - STD c2,56(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a7L,a7R,b1L,b1R,c3,c1,c2 - MUL_ADD_C a6L,a6R,b2L,b2R,c3,c1,c2 - MUL_ADD_C a5L,a5R,b3L,b3R,c3,c1,c2 - MUL_ADD_C a4L,a4R,b4L,b4R,c3,c1,c2 - MUL_ADD_C a3L,a3R,b5L,b5R,c3,c1,c2 - MUL_ADD_C a2L,a2R,b6L,b6R,c3,c1,c2 - MUL_ADD_C a1L,a1R,b7L,b7R,c3,c1,c2 - STD c3,64(r_ptr) - COPY %r0,c3 - - MUL_ADD_C a2L,a2R,b7L,b7R,c1,c2,c3 - MUL_ADD_C a3L,a3R,b6L,b6R,c1,c2,c3 - MUL_ADD_C a4L,a4R,b5L,b5R,c1,c2,c3 - MUL_ADD_C a5L,a5R,b4L,b4R,c1,c2,c3 - MUL_ADD_C a6L,a6R,b3L,b3R,c1,c2,c3 - MUL_ADD_C a7L,a7R,b2L,b2R,c1,c2,c3 - STD c1,72(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a7L,a7R,b3L,b3R,c2,c3,c1 - MUL_ADD_C a6L,a6R,b4L,b4R,c2,c3,c1 - MUL_ADD_C a5L,a5R,b5L,b5R,c2,c3,c1 - MUL_ADD_C a4L,a4R,b6L,b6R,c2,c3,c1 - MUL_ADD_C a3L,a3R,b7L,b7R,c2,c3,c1 - STD c2,80(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a4L,a4R,b7L,b7R,c3,c1,c2 - MUL_ADD_C a5L,a5R,b6L,b6R,c3,c1,c2 - MUL_ADD_C a6L,a6R,b5L,b5R,c3,c1,c2 - MUL_ADD_C a7L,a7R,b4L,b4R,c3,c1,c2 - STD c3,88(r_ptr) - COPY %r0,c3 - - MUL_ADD_C a7L,a7R,b5L,b5R,c1,c2,c3 - MUL_ADD_C a6L,a6R,b6L,b6R,c1,c2,c3 - MUL_ADD_C a5L,a5R,b7L,b7R,c1,c2,c3 - STD c1,96(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a6L,a6R,b7L,b7R,c2,c3,c1 - MUL_ADD_C a7L,a7R,b6L,b6R,c2,c3,c1 - STD c2,104(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a7L,a7R,b7L,b7R,c3,c1,c2 - STD c3,112(r_ptr) - STD c1,120(r_ptr) - - .EXIT - FLDD -88(%sp),%fr13 - FLDD -96(%sp),%fr12 - LDD -104(%sp),%r6 ; restore r6 - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 - - .PROCEND - -;----------------------------------------------------------------------------- -; -;void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) -; arg0 = r_ptr -; arg1 = a_ptr -; arg2 = b_ptr -; - -bn_mul_comba4 - .proc - .callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE - .EXPORT bn_mul_comba4,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .entry - .align 64 - - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - STD %r5,16(%sp) ; save r5 - STD %r6,24(%sp) ; save r6 - FSTD %fr12,32(%sp) ; save r6 - FSTD %fr13,40(%sp) ; save r7 - - ; - ; Zero out carries - ; - COPY %r0,c1 - COPY %r0,c2 - COPY %r0,c3 - - LDO 128(%sp),%sp ; bump stack - DEPDI,Z 1,31,1,high_one ; Create Value 1 << 32 - - ; - ; Load up all of the values we are going to use - ; - FLDD 0(a_ptr),a0 - FLDD 8(a_ptr),a1 - FLDD 16(a_ptr),a2 - FLDD 24(a_ptr),a3 - - FLDD 0(b_ptr),b0 - FLDD 8(b_ptr),b1 - FLDD 16(b_ptr),b2 - FLDD 24(b_ptr),b3 - - MUL_ADD_C a0L,a0R,b0L,b0R,c1,c2,c3 - STD c1,0(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a0L,a0R,b1L,b1R,c2,c3,c1 - MUL_ADD_C a1L,a1R,b0L,b0R,c2,c3,c1 - STD c2,8(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a2L,a2R,b0L,b0R,c3,c1,c2 - MUL_ADD_C a1L,a1R,b1L,b1R,c3,c1,c2 - MUL_ADD_C a0L,a0R,b2L,b2R,c3,c1,c2 - STD c3,16(r_ptr) - COPY %r0,c3 - - MUL_ADD_C a0L,a0R,b3L,b3R,c1,c2,c3 - MUL_ADD_C a1L,a1R,b2L,b2R,c1,c2,c3 - MUL_ADD_C a2L,a2R,b1L,b1R,c1,c2,c3 - MUL_ADD_C a3L,a3R,b0L,b0R,c1,c2,c3 - STD c1,24(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a3L,a3R,b1L,b1R,c2,c3,c1 - MUL_ADD_C a2L,a2R,b2L,b2R,c2,c3,c1 - MUL_ADD_C a1L,a1R,b3L,b3R,c2,c3,c1 - STD c2,32(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a2L,a2R,b3L,b3R,c3,c1,c2 - MUL_ADD_C a3L,a3R,b2L,b2R,c3,c1,c2 - STD c3,40(r_ptr) - COPY %r0,c3 - - MUL_ADD_C a3L,a3R,b3L,b3R,c1,c2,c3 - STD c1,48(r_ptr) - STD c2,56(r_ptr) - - .EXIT - FLDD -88(%sp),%fr13 - FLDD -96(%sp),%fr12 - LDD -104(%sp),%r6 ; restore r6 - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 - - .PROCEND - - -;--- not PIC .SPACE $TEXT$ -;--- not PIC .SUBSPA $CODE$ -;--- not PIC .SPACE $PRIVATE$,SORT=16 -;--- not PIC .IMPORT $global$,DATA -;--- not PIC .SPACE $TEXT$ -;--- not PIC .SUBSPA $CODE$ -;--- not PIC .SUBSPA $LIT$,ACCESS=0x2c -;--- not PIC C$7 -;--- not PIC .ALIGN 8 -;--- not PIC .STRINGZ "Division would overflow (%d)\n" - .END diff --git a/app/openssl/crypto/bn/asm/pa-risc2W.s b/app/openssl/crypto/bn/asm/pa-risc2W.s deleted file mode 100644 index a9954575..00000000 --- a/app/openssl/crypto/bn/asm/pa-risc2W.s +++ /dev/null @@ -1,1605 +0,0 @@ -; -; PA-RISC 64-bit implementation of bn_asm code -; -; This code is approximately 2x faster than the C version -; for RSA/DSA. -; -; See http://devresource.hp.com/ for more details on the PA-RISC -; architecture. Also see the book "PA-RISC 2.0 Architecture" -; by Gerry Kane for information on the instruction set architecture. -; -; Code written by Chris Ruemmler (with some help from the HP C -; compiler). -; -; The code compiles with HP's assembler -; - - .level 2.0W - .space $TEXT$ - .subspa $CODE$,QUAD=0,ALIGN=8,ACCESS=0x2c,CODE_ONLY - -; -; Global Register definitions used for the routines. -; -; Some information about HP's runtime architecture for 64-bits. -; -; "Caller save" means the calling function must save the register -; if it wants the register to be preserved. -; "Callee save" means if a function uses the register, it must save -; the value before using it. -; -; For the floating point registers -; -; "caller save" registers: fr4-fr11, fr22-fr31 -; "callee save" registers: fr12-fr21 -; "special" registers: fr0-fr3 (status and exception registers) -; -; For the integer registers -; value zero : r0 -; "caller save" registers: r1,r19-r26 -; "callee save" registers: r3-r18 -; return register : r2 (rp) -; return values ; r28 (ret0,ret1) -; Stack pointer ; r30 (sp) -; global data pointer ; r27 (dp) -; argument pointer ; r29 (ap) -; millicode return ptr ; r31 (also a caller save register) - - -; -; Arguments to the routines -; -r_ptr .reg %r26 -a_ptr .reg %r25 -b_ptr .reg %r24 -num .reg %r24 -w .reg %r23 -n .reg %r23 - - -; -; Globals used in some routines -; - -top_overflow .reg %r29 -high_mask .reg %r22 ; value 0xffffffff80000000L - - -;------------------------------------------------------------------------------ -; -; bn_mul_add_words -; -;BN_ULONG bn_mul_add_words(BN_ULONG *r_ptr, BN_ULONG *a_ptr, -; int num, BN_ULONG w) -; -; arg0 = r_ptr -; arg1 = a_ptr -; arg2 = num -; arg3 = w -; -; Local register definitions -; - -fm1 .reg %fr22 -fm .reg %fr23 -ht_temp .reg %fr24 -ht_temp_1 .reg %fr25 -lt_temp .reg %fr26 -lt_temp_1 .reg %fr27 -fm1_1 .reg %fr28 -fm_1 .reg %fr29 - -fw_h .reg %fr7L -fw_l .reg %fr7R -fw .reg %fr7 - -fht_0 .reg %fr8L -flt_0 .reg %fr8R -t_float_0 .reg %fr8 - -fht_1 .reg %fr9L -flt_1 .reg %fr9R -t_float_1 .reg %fr9 - -tmp_0 .reg %r31 -tmp_1 .reg %r21 -m_0 .reg %r20 -m_1 .reg %r19 -ht_0 .reg %r1 -ht_1 .reg %r3 -lt_0 .reg %r4 -lt_1 .reg %r5 -m1_0 .reg %r6 -m1_1 .reg %r7 -rp_val .reg %r8 -rp_val_1 .reg %r9 - -bn_mul_add_words - .export bn_mul_add_words,entry,NO_RELOCATION,LONG_RETURN - .proc - .callinfo frame=128 - .entry - .align 64 - - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - NOP ; Needed to make the loop 16-byte aligned - NOP ; Needed to make the loop 16-byte aligned - - STD %r5,16(%sp) ; save r5 - STD %r6,24(%sp) ; save r6 - STD %r7,32(%sp) ; save r7 - STD %r8,40(%sp) ; save r8 - - STD %r9,48(%sp) ; save r9 - COPY %r0,%ret0 ; return 0 by default - DEPDI,Z 1,31,1,top_overflow ; top_overflow = 1 << 32 - STD w,56(%sp) ; store w on stack - - CMPIB,>= 0,num,bn_mul_add_words_exit ; if (num <= 0) then exit - LDO 128(%sp),%sp ; bump stack - - ; - ; The loop is unrolled twice, so if there is only 1 number - ; then go straight to the cleanup code. - ; - CMPIB,= 1,num,bn_mul_add_words_single_top - FLDD -72(%sp),fw ; load up w into fp register fw (fw_h/fw_l) - - ; - ; This loop is unrolled 2 times (64-byte aligned as well) - ; - ; PA-RISC 2.0 chips have two fully pipelined multipliers, thus - ; two 32-bit mutiplies can be issued per cycle. - ; -bn_mul_add_words_unroll2 - - FLDD 0(a_ptr),t_float_0 ; load up 64-bit value (fr8L) ht(L)/lt(R) - FLDD 8(a_ptr),t_float_1 ; load up 64-bit value (fr8L) ht(L)/lt(R) - LDD 0(r_ptr),rp_val ; rp[0] - LDD 8(r_ptr),rp_val_1 ; rp[1] - - XMPYU fht_0,fw_l,fm1 ; m1[0] = fht_0*fw_l - XMPYU fht_1,fw_l,fm1_1 ; m1[1] = fht_1*fw_l - FSTD fm1,-16(%sp) ; -16(sp) = m1[0] - FSTD fm1_1,-48(%sp) ; -48(sp) = m1[1] - - XMPYU flt_0,fw_h,fm ; m[0] = flt_0*fw_h - XMPYU flt_1,fw_h,fm_1 ; m[1] = flt_1*fw_h - FSTD fm,-8(%sp) ; -8(sp) = m[0] - FSTD fm_1,-40(%sp) ; -40(sp) = m[1] - - XMPYU fht_0,fw_h,ht_temp ; ht_temp = fht_0*fw_h - XMPYU fht_1,fw_h,ht_temp_1 ; ht_temp_1 = fht_1*fw_h - FSTD ht_temp,-24(%sp) ; -24(sp) = ht_temp - FSTD ht_temp_1,-56(%sp) ; -56(sp) = ht_temp_1 - - XMPYU flt_0,fw_l,lt_temp ; lt_temp = lt*fw_l - XMPYU flt_1,fw_l,lt_temp_1 ; lt_temp = lt*fw_l - FSTD lt_temp,-32(%sp) ; -32(sp) = lt_temp - FSTD lt_temp_1,-64(%sp) ; -64(sp) = lt_temp_1 - - LDD -8(%sp),m_0 ; m[0] - LDD -40(%sp),m_1 ; m[1] - LDD -16(%sp),m1_0 ; m1[0] - LDD -48(%sp),m1_1 ; m1[1] - - LDD -24(%sp),ht_0 ; ht[0] - LDD -56(%sp),ht_1 ; ht[1] - ADD,L m1_0,m_0,tmp_0 ; tmp_0 = m[0] + m1[0]; - ADD,L m1_1,m_1,tmp_1 ; tmp_1 = m[1] + m1[1]; - - LDD -32(%sp),lt_0 - LDD -64(%sp),lt_1 - CMPCLR,*>>= tmp_0,m1_0, %r0 ; if (m[0] < m1[0]) - ADD,L ht_0,top_overflow,ht_0 ; ht[0] += (1<<32) - - CMPCLR,*>>= tmp_1,m1_1,%r0 ; if (m[1] < m1[1]) - ADD,L ht_1,top_overflow,ht_1 ; ht[1] += (1<<32) - EXTRD,U tmp_0,31,32,m_0 ; m[0]>>32 - DEPD,Z tmp_0,31,32,m1_0 ; m1[0] = m[0]<<32 - - EXTRD,U tmp_1,31,32,m_1 ; m[1]>>32 - DEPD,Z tmp_1,31,32,m1_1 ; m1[1] = m[1]<<32 - ADD,L ht_0,m_0,ht_0 ; ht[0]+= (m[0]>>32) - ADD,L ht_1,m_1,ht_1 ; ht[1]+= (m[1]>>32) - - ADD lt_0,m1_0,lt_0 ; lt[0] = lt[0]+m1[0]; - ADD,DC ht_0,%r0,ht_0 ; ht[0]++ - ADD lt_1,m1_1,lt_1 ; lt[1] = lt[1]+m1[1]; - ADD,DC ht_1,%r0,ht_1 ; ht[1]++ - - ADD %ret0,lt_0,lt_0 ; lt[0] = lt[0] + c; - ADD,DC ht_0,%r0,ht_0 ; ht[0]++ - ADD lt_0,rp_val,lt_0 ; lt[0] = lt[0]+rp[0] - ADD,DC ht_0,%r0,ht_0 ; ht[0]++ - - LDO -2(num),num ; num = num - 2; - ADD ht_0,lt_1,lt_1 ; lt[1] = lt[1] + ht_0 (c); - ADD,DC ht_1,%r0,ht_1 ; ht[1]++ - STD lt_0,0(r_ptr) ; rp[0] = lt[0] - - ADD lt_1,rp_val_1,lt_1 ; lt[1] = lt[1]+rp[1] - ADD,DC ht_1,%r0,%ret0 ; ht[1]++ - LDO 16(a_ptr),a_ptr ; a_ptr += 2 - - STD lt_1,8(r_ptr) ; rp[1] = lt[1] - CMPIB,<= 2,num,bn_mul_add_words_unroll2 ; go again if more to do - LDO 16(r_ptr),r_ptr ; r_ptr += 2 - - CMPIB,=,N 0,num,bn_mul_add_words_exit ; are we done, or cleanup last one - - ; - ; Top of loop aligned on 64-byte boundary - ; -bn_mul_add_words_single_top - FLDD 0(a_ptr),t_float_0 ; load up 64-bit value (fr8L) ht(L)/lt(R) - LDD 0(r_ptr),rp_val ; rp[0] - LDO 8(a_ptr),a_ptr ; a_ptr++ - XMPYU fht_0,fw_l,fm1 ; m1 = ht*fw_l - FSTD fm1,-16(%sp) ; -16(sp) = m1 - XMPYU flt_0,fw_h,fm ; m = lt*fw_h - FSTD fm,-8(%sp) ; -8(sp) = m - XMPYU fht_0,fw_h,ht_temp ; ht_temp = ht*fw_h - FSTD ht_temp,-24(%sp) ; -24(sp) = ht - XMPYU flt_0,fw_l,lt_temp ; lt_temp = lt*fw_l - FSTD lt_temp,-32(%sp) ; -32(sp) = lt - - LDD -8(%sp),m_0 - LDD -16(%sp),m1_0 ; m1 = temp1 - ADD,L m_0,m1_0,tmp_0 ; tmp_0 = m + m1; - LDD -24(%sp),ht_0 - LDD -32(%sp),lt_0 - - CMPCLR,*>>= tmp_0,m1_0,%r0 ; if (m < m1) - ADD,L ht_0,top_overflow,ht_0 ; ht += (1<<32) - - EXTRD,U tmp_0,31,32,m_0 ; m>>32 - DEPD,Z tmp_0,31,32,m1_0 ; m1 = m<<32 - - ADD,L ht_0,m_0,ht_0 ; ht+= (m>>32) - ADD lt_0,m1_0,tmp_0 ; tmp_0 = lt+m1; - ADD,DC ht_0,%r0,ht_0 ; ht++ - ADD %ret0,tmp_0,lt_0 ; lt = lt + c; - ADD,DC ht_0,%r0,ht_0 ; ht++ - ADD lt_0,rp_val,lt_0 ; lt = lt+rp[0] - ADD,DC ht_0,%r0,%ret0 ; ht++ - STD lt_0,0(r_ptr) ; rp[0] = lt - -bn_mul_add_words_exit - .EXIT - LDD -80(%sp),%r9 ; restore r9 - LDD -88(%sp),%r8 ; restore r8 - LDD -96(%sp),%r7 ; restore r7 - LDD -104(%sp),%r6 ; restore r6 - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 ; restore r3 - .PROCEND ;in=23,24,25,26,29;out=28; - -;---------------------------------------------------------------------------- -; -;BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w) -; -; arg0 = rp -; arg1 = ap -; arg2 = num -; arg3 = w - -bn_mul_words - .proc - .callinfo frame=128 - .entry - .EXPORT bn_mul_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .align 64 - - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - STD %r5,16(%sp) ; save r5 - STD %r6,24(%sp) ; save r6 - - STD %r7,32(%sp) ; save r7 - COPY %r0,%ret0 ; return 0 by default - DEPDI,Z 1,31,1,top_overflow ; top_overflow = 1 << 32 - STD w,56(%sp) ; w on stack - - CMPIB,>= 0,num,bn_mul_words_exit - LDO 128(%sp),%sp ; bump stack - - ; - ; See if only 1 word to do, thus just do cleanup - ; - CMPIB,= 1,num,bn_mul_words_single_top - FLDD -72(%sp),fw ; load up w into fp register fw (fw_h/fw_l) - - ; - ; This loop is unrolled 2 times (64-byte aligned as well) - ; - ; PA-RISC 2.0 chips have two fully pipelined multipliers, thus - ; two 32-bit mutiplies can be issued per cycle. - ; -bn_mul_words_unroll2 - - FLDD 0(a_ptr),t_float_0 ; load up 64-bit value (fr8L) ht(L)/lt(R) - FLDD 8(a_ptr),t_float_1 ; load up 64-bit value (fr8L) ht(L)/lt(R) - XMPYU fht_0,fw_l,fm1 ; m1[0] = fht_0*fw_l - XMPYU fht_1,fw_l,fm1_1 ; m1[1] = ht*fw_l - - FSTD fm1,-16(%sp) ; -16(sp) = m1 - FSTD fm1_1,-48(%sp) ; -48(sp) = m1 - XMPYU flt_0,fw_h,fm ; m = lt*fw_h - XMPYU flt_1,fw_h,fm_1 ; m = lt*fw_h - - FSTD fm,-8(%sp) ; -8(sp) = m - FSTD fm_1,-40(%sp) ; -40(sp) = m - XMPYU fht_0,fw_h,ht_temp ; ht_temp = fht_0*fw_h - XMPYU fht_1,fw_h,ht_temp_1 ; ht_temp = ht*fw_h - - FSTD ht_temp,-24(%sp) ; -24(sp) = ht - FSTD ht_temp_1,-56(%sp) ; -56(sp) = ht - XMPYU flt_0,fw_l,lt_temp ; lt_temp = lt*fw_l - XMPYU flt_1,fw_l,lt_temp_1 ; lt_temp = lt*fw_l - - FSTD lt_temp,-32(%sp) ; -32(sp) = lt - FSTD lt_temp_1,-64(%sp) ; -64(sp) = lt - LDD -8(%sp),m_0 - LDD -40(%sp),m_1 - - LDD -16(%sp),m1_0 - LDD -48(%sp),m1_1 - LDD -24(%sp),ht_0 - LDD -56(%sp),ht_1 - - ADD,L m1_0,m_0,tmp_0 ; tmp_0 = m + m1; - ADD,L m1_1,m_1,tmp_1 ; tmp_1 = m + m1; - LDD -32(%sp),lt_0 - LDD -64(%sp),lt_1 - - CMPCLR,*>>= tmp_0,m1_0, %r0 ; if (m < m1) - ADD,L ht_0,top_overflow,ht_0 ; ht += (1<<32) - CMPCLR,*>>= tmp_1,m1_1,%r0 ; if (m < m1) - ADD,L ht_1,top_overflow,ht_1 ; ht += (1<<32) - - EXTRD,U tmp_0,31,32,m_0 ; m>>32 - DEPD,Z tmp_0,31,32,m1_0 ; m1 = m<<32 - EXTRD,U tmp_1,31,32,m_1 ; m>>32 - DEPD,Z tmp_1,31,32,m1_1 ; m1 = m<<32 - - ADD,L ht_0,m_0,ht_0 ; ht+= (m>>32) - ADD,L ht_1,m_1,ht_1 ; ht+= (m>>32) - ADD lt_0,m1_0,lt_0 ; lt = lt+m1; - ADD,DC ht_0,%r0,ht_0 ; ht++ - - ADD lt_1,m1_1,lt_1 ; lt = lt+m1; - ADD,DC ht_1,%r0,ht_1 ; ht++ - ADD %ret0,lt_0,lt_0 ; lt = lt + c (ret0); - ADD,DC ht_0,%r0,ht_0 ; ht++ - - ADD ht_0,lt_1,lt_1 ; lt = lt + c (ht_0) - ADD,DC ht_1,%r0,ht_1 ; ht++ - STD lt_0,0(r_ptr) ; rp[0] = lt - STD lt_1,8(r_ptr) ; rp[1] = lt - - COPY ht_1,%ret0 ; carry = ht - LDO -2(num),num ; num = num - 2; - LDO 16(a_ptr),a_ptr ; ap += 2 - CMPIB,<= 2,num,bn_mul_words_unroll2 - LDO 16(r_ptr),r_ptr ; rp++ - - CMPIB,=,N 0,num,bn_mul_words_exit ; are we done? - - ; - ; Top of loop aligned on 64-byte boundary - ; -bn_mul_words_single_top - FLDD 0(a_ptr),t_float_0 ; load up 64-bit value (fr8L) ht(L)/lt(R) - - XMPYU fht_0,fw_l,fm1 ; m1 = ht*fw_l - FSTD fm1,-16(%sp) ; -16(sp) = m1 - XMPYU flt_0,fw_h,fm ; m = lt*fw_h - FSTD fm,-8(%sp) ; -8(sp) = m - XMPYU fht_0,fw_h,ht_temp ; ht_temp = ht*fw_h - FSTD ht_temp,-24(%sp) ; -24(sp) = ht - XMPYU flt_0,fw_l,lt_temp ; lt_temp = lt*fw_l - FSTD lt_temp,-32(%sp) ; -32(sp) = lt - - LDD -8(%sp),m_0 - LDD -16(%sp),m1_0 - ADD,L m_0,m1_0,tmp_0 ; tmp_0 = m + m1; - LDD -24(%sp),ht_0 - LDD -32(%sp),lt_0 - - CMPCLR,*>>= tmp_0,m1_0,%r0 ; if (m < m1) - ADD,L ht_0,top_overflow,ht_0 ; ht += (1<<32) - - EXTRD,U tmp_0,31,32,m_0 ; m>>32 - DEPD,Z tmp_0,31,32,m1_0 ; m1 = m<<32 - - ADD,L ht_0,m_0,ht_0 ; ht+= (m>>32) - ADD lt_0,m1_0,lt_0 ; lt= lt+m1; - ADD,DC ht_0,%r0,ht_0 ; ht++ - - ADD %ret0,lt_0,lt_0 ; lt = lt + c; - ADD,DC ht_0,%r0,ht_0 ; ht++ - - COPY ht_0,%ret0 ; copy carry - STD lt_0,0(r_ptr) ; rp[0] = lt - -bn_mul_words_exit - .EXIT - LDD -96(%sp),%r7 ; restore r7 - LDD -104(%sp),%r6 ; restore r6 - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 ; restore r3 - .PROCEND ;in=23,24,25,26,29;out=28; - -;---------------------------------------------------------------------------- -; -;void bn_sqr_words(BN_ULONG *rp, BN_ULONG *ap, int num) -; -; arg0 = rp -; arg1 = ap -; arg2 = num -; - -bn_sqr_words - .proc - .callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE - .EXPORT bn_sqr_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .entry - .align 64 - - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - NOP - STD %r5,16(%sp) ; save r5 - - CMPIB,>= 0,num,bn_sqr_words_exit - LDO 128(%sp),%sp ; bump stack - - ; - ; If only 1, the goto straight to cleanup - ; - CMPIB,= 1,num,bn_sqr_words_single_top - DEPDI,Z -1,32,33,high_mask ; Create Mask 0xffffffff80000000L - - ; - ; This loop is unrolled 2 times (64-byte aligned as well) - ; - -bn_sqr_words_unroll2 - FLDD 0(a_ptr),t_float_0 ; a[0] - FLDD 8(a_ptr),t_float_1 ; a[1] - XMPYU fht_0,flt_0,fm ; m[0] - XMPYU fht_1,flt_1,fm_1 ; m[1] - - FSTD fm,-24(%sp) ; store m[0] - FSTD fm_1,-56(%sp) ; store m[1] - XMPYU flt_0,flt_0,lt_temp ; lt[0] - XMPYU flt_1,flt_1,lt_temp_1 ; lt[1] - - FSTD lt_temp,-16(%sp) ; store lt[0] - FSTD lt_temp_1,-48(%sp) ; store lt[1] - XMPYU fht_0,fht_0,ht_temp ; ht[0] - XMPYU fht_1,fht_1,ht_temp_1 ; ht[1] - - FSTD ht_temp,-8(%sp) ; store ht[0] - FSTD ht_temp_1,-40(%sp) ; store ht[1] - LDD -24(%sp),m_0 - LDD -56(%sp),m_1 - - AND m_0,high_mask,tmp_0 ; m[0] & Mask - AND m_1,high_mask,tmp_1 ; m[1] & Mask - DEPD,Z m_0,30,31,m_0 ; m[0] << 32+1 - DEPD,Z m_1,30,31,m_1 ; m[1] << 32+1 - - LDD -16(%sp),lt_0 - LDD -48(%sp),lt_1 - EXTRD,U tmp_0,32,33,tmp_0 ; tmp_0 = m[0]&Mask >> 32-1 - EXTRD,U tmp_1,32,33,tmp_1 ; tmp_1 = m[1]&Mask >> 32-1 - - LDD -8(%sp),ht_0 - LDD -40(%sp),ht_1 - ADD,L ht_0,tmp_0,ht_0 ; ht[0] += tmp_0 - ADD,L ht_1,tmp_1,ht_1 ; ht[1] += tmp_1 - - ADD lt_0,m_0,lt_0 ; lt = lt+m - ADD,DC ht_0,%r0,ht_0 ; ht[0]++ - STD lt_0,0(r_ptr) ; rp[0] = lt[0] - STD ht_0,8(r_ptr) ; rp[1] = ht[1] - - ADD lt_1,m_1,lt_1 ; lt = lt+m - ADD,DC ht_1,%r0,ht_1 ; ht[1]++ - STD lt_1,16(r_ptr) ; rp[2] = lt[1] - STD ht_1,24(r_ptr) ; rp[3] = ht[1] - - LDO -2(num),num ; num = num - 2; - LDO 16(a_ptr),a_ptr ; ap += 2 - CMPIB,<= 2,num,bn_sqr_words_unroll2 - LDO 32(r_ptr),r_ptr ; rp += 4 - - CMPIB,=,N 0,num,bn_sqr_words_exit ; are we done? - - ; - ; Top of loop aligned on 64-byte boundary - ; -bn_sqr_words_single_top - FLDD 0(a_ptr),t_float_0 ; load up 64-bit value (fr8L) ht(L)/lt(R) - - XMPYU fht_0,flt_0,fm ; m - FSTD fm,-24(%sp) ; store m - - XMPYU flt_0,flt_0,lt_temp ; lt - FSTD lt_temp,-16(%sp) ; store lt - - XMPYU fht_0,fht_0,ht_temp ; ht - FSTD ht_temp,-8(%sp) ; store ht - - LDD -24(%sp),m_0 ; load m - AND m_0,high_mask,tmp_0 ; m & Mask - DEPD,Z m_0,30,31,m_0 ; m << 32+1 - LDD -16(%sp),lt_0 ; lt - - LDD -8(%sp),ht_0 ; ht - EXTRD,U tmp_0,32,33,tmp_0 ; tmp_0 = m&Mask >> 32-1 - ADD m_0,lt_0,lt_0 ; lt = lt+m - ADD,L ht_0,tmp_0,ht_0 ; ht += tmp_0 - ADD,DC ht_0,%r0,ht_0 ; ht++ - - STD lt_0,0(r_ptr) ; rp[0] = lt - STD ht_0,8(r_ptr) ; rp[1] = ht - -bn_sqr_words_exit - .EXIT - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 - .PROCEND ;in=23,24,25,26,29;out=28; - - -;---------------------------------------------------------------------------- -; -;BN_ULONG bn_add_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n) -; -; arg0 = rp -; arg1 = ap -; arg2 = bp -; arg3 = n - -t .reg %r22 -b .reg %r21 -l .reg %r20 - -bn_add_words - .proc - .entry - .callinfo - .EXPORT bn_add_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .align 64 - - CMPIB,>= 0,n,bn_add_words_exit - COPY %r0,%ret0 ; return 0 by default - - ; - ; If 2 or more numbers do the loop - ; - CMPIB,= 1,n,bn_add_words_single_top - NOP - - ; - ; This loop is unrolled 2 times (64-byte aligned as well) - ; -bn_add_words_unroll2 - LDD 0(a_ptr),t - LDD 0(b_ptr),b - ADD t,%ret0,t ; t = t+c; - ADD,DC %r0,%r0,%ret0 ; set c to carry - ADD t,b,l ; l = t + b[0] - ADD,DC %ret0,%r0,%ret0 ; c+= carry - STD l,0(r_ptr) - - LDD 8(a_ptr),t - LDD 8(b_ptr),b - ADD t,%ret0,t ; t = t+c; - ADD,DC %r0,%r0,%ret0 ; set c to carry - ADD t,b,l ; l = t + b[0] - ADD,DC %ret0,%r0,%ret0 ; c+= carry - STD l,8(r_ptr) - - LDO -2(n),n - LDO 16(a_ptr),a_ptr - LDO 16(b_ptr),b_ptr - - CMPIB,<= 2,n,bn_add_words_unroll2 - LDO 16(r_ptr),r_ptr - - CMPIB,=,N 0,n,bn_add_words_exit ; are we done? - -bn_add_words_single_top - LDD 0(a_ptr),t - LDD 0(b_ptr),b - - ADD t,%ret0,t ; t = t+c; - ADD,DC %r0,%r0,%ret0 ; set c to carry (could use CMPCLR??) - ADD t,b,l ; l = t + b[0] - ADD,DC %ret0,%r0,%ret0 ; c+= carry - STD l,0(r_ptr) - -bn_add_words_exit - .EXIT - BVE (%rp) - NOP - .PROCEND ;in=23,24,25,26,29;out=28; - -;---------------------------------------------------------------------------- -; -;BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n) -; -; arg0 = rp -; arg1 = ap -; arg2 = bp -; arg3 = n - -t1 .reg %r22 -t2 .reg %r21 -sub_tmp1 .reg %r20 -sub_tmp2 .reg %r19 - - -bn_sub_words - .proc - .callinfo - .EXPORT bn_sub_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .entry - .align 64 - - CMPIB,>= 0,n,bn_sub_words_exit - COPY %r0,%ret0 ; return 0 by default - - ; - ; If 2 or more numbers do the loop - ; - CMPIB,= 1,n,bn_sub_words_single_top - NOP - - ; - ; This loop is unrolled 2 times (64-byte aligned as well) - ; -bn_sub_words_unroll2 - LDD 0(a_ptr),t1 - LDD 0(b_ptr),t2 - SUB t1,t2,sub_tmp1 ; t3 = t1-t2; - SUB sub_tmp1,%ret0,sub_tmp1 ; t3 = t3- c; - - CMPCLR,*>> t1,t2,sub_tmp2 ; clear if t1 > t2 - LDO 1(%r0),sub_tmp2 - - CMPCLR,*= t1,t2,%r0 - COPY sub_tmp2,%ret0 - STD sub_tmp1,0(r_ptr) - - LDD 8(a_ptr),t1 - LDD 8(b_ptr),t2 - SUB t1,t2,sub_tmp1 ; t3 = t1-t2; - SUB sub_tmp1,%ret0,sub_tmp1 ; t3 = t3- c; - CMPCLR,*>> t1,t2,sub_tmp2 ; clear if t1 > t2 - LDO 1(%r0),sub_tmp2 - - CMPCLR,*= t1,t2,%r0 - COPY sub_tmp2,%ret0 - STD sub_tmp1,8(r_ptr) - - LDO -2(n),n - LDO 16(a_ptr),a_ptr - LDO 16(b_ptr),b_ptr - - CMPIB,<= 2,n,bn_sub_words_unroll2 - LDO 16(r_ptr),r_ptr - - CMPIB,=,N 0,n,bn_sub_words_exit ; are we done? - -bn_sub_words_single_top - LDD 0(a_ptr),t1 - LDD 0(b_ptr),t2 - SUB t1,t2,sub_tmp1 ; t3 = t1-t2; - SUB sub_tmp1,%ret0,sub_tmp1 ; t3 = t3- c; - CMPCLR,*>> t1,t2,sub_tmp2 ; clear if t1 > t2 - LDO 1(%r0),sub_tmp2 - - CMPCLR,*= t1,t2,%r0 - COPY sub_tmp2,%ret0 - - STD sub_tmp1,0(r_ptr) - -bn_sub_words_exit - .EXIT - BVE (%rp) - NOP - .PROCEND ;in=23,24,25,26,29;out=28; - -;------------------------------------------------------------------------------ -; -; unsigned long bn_div_words(unsigned long h, unsigned long l, unsigned long d) -; -; arg0 = h -; arg1 = l -; arg2 = d -; -; This is mainly just modified assembly from the compiler, thus the -; lack of variable names. -; -;------------------------------------------------------------------------------ -bn_div_words - .proc - .callinfo CALLER,FRAME=272,ENTRY_GR=%r10,SAVE_RP,ARGS_SAVED,ORDERING_AWARE - .EXPORT bn_div_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .IMPORT BN_num_bits_word,CODE,NO_RELOCATION - .IMPORT __iob,DATA - .IMPORT fprintf,CODE,NO_RELOCATION - .IMPORT abort,CODE,NO_RELOCATION - .IMPORT $$div2U,MILLICODE - .entry - STD %r2,-16(%r30) - STD,MA %r3,352(%r30) - STD %r4,-344(%r30) - STD %r5,-336(%r30) - STD %r6,-328(%r30) - STD %r7,-320(%r30) - STD %r8,-312(%r30) - STD %r9,-304(%r30) - STD %r10,-296(%r30) - - STD %r27,-288(%r30) ; save gp - - COPY %r24,%r3 ; save d - COPY %r26,%r4 ; save h (high 64-bits) - LDO -1(%r0),%ret0 ; return -1 by default - - CMPB,*= %r0,%arg2,$D3 ; if (d == 0) - COPY %r25,%r5 ; save l (low 64-bits) - - LDO -48(%r30),%r29 ; create ap - .CALL ;in=26,29;out=28; - B,L BN_num_bits_word,%r2 - COPY %r3,%r26 - LDD -288(%r30),%r27 ; restore gp - LDI 64,%r21 - - CMPB,= %r21,%ret0,$00000012 ;if (i == 64) (forward) - COPY %ret0,%r24 ; i - MTSARCM %r24 - DEPDI,Z -1,%sar,1,%r29 - CMPB,*<<,N %r29,%r4,bn_div_err_case ; if (h > 1<<i) (forward) - -$00000012 - SUBI 64,%r24,%r31 ; i = 64 - i; - CMPCLR,*<< %r4,%r3,%r0 ; if (h >= d) - SUB %r4,%r3,%r4 ; h -= d - CMPB,= %r31,%r0,$0000001A ; if (i) - COPY %r0,%r10 ; ret = 0 - MTSARCM %r31 ; i to shift - DEPD,Z %r3,%sar,64,%r3 ; d <<= i; - SUBI 64,%r31,%r19 ; 64 - i; redundent - MTSAR %r19 ; (64 -i) to shift - SHRPD %r4,%r5,%sar,%r4 ; l>> (64-i) - MTSARCM %r31 ; i to shift - DEPD,Z %r5,%sar,64,%r5 ; l <<= i; - -$0000001A - DEPDI,Z -1,31,32,%r19 - EXTRD,U %r3,31,32,%r6 ; dh=(d&0xfff)>>32 - EXTRD,U %r3,63,32,%r8 ; dl = d&0xffffff - LDO 2(%r0),%r9 - STD %r3,-280(%r30) ; "d" to stack - -$0000001C - DEPDI,Z -1,63,32,%r29 ; - EXTRD,U %r4,31,32,%r31 ; h >> 32 - CMPB,*=,N %r31,%r6,$D2 ; if ((h>>32) != dh)(forward) div - COPY %r4,%r26 - EXTRD,U %r4,31,32,%r25 - COPY %r6,%r24 - .CALL ;in=23,24,25,26;out=20,21,22,28,29; (MILLICALL) - B,L $$div2U,%r2 - EXTRD,U %r6,31,32,%r23 - DEPD %r28,31,32,%r29 -$D2 - STD %r29,-272(%r30) ; q - AND %r5,%r19,%r24 ; t & 0xffffffff00000000; - EXTRD,U %r24,31,32,%r24 ; ??? - FLDD -272(%r30),%fr7 ; q - FLDD -280(%r30),%fr8 ; d - XMPYU %fr8L,%fr7L,%fr10 - FSTD %fr10,-256(%r30) - XMPYU %fr8L,%fr7R,%fr22 - FSTD %fr22,-264(%r30) - XMPYU %fr8R,%fr7L,%fr11 - XMPYU %fr8R,%fr7R,%fr23 - FSTD %fr11,-232(%r30) - FSTD %fr23,-240(%r30) - LDD -256(%r30),%r28 - DEPD,Z %r28,31,32,%r2 - LDD -264(%r30),%r20 - ADD,L %r20,%r2,%r31 - LDD -232(%r30),%r22 - DEPD,Z %r22,31,32,%r22 - LDD -240(%r30),%r21 - B $00000024 ; enter loop - ADD,L %r21,%r22,%r23 - -$0000002A - LDO -1(%r29),%r29 - SUB %r23,%r8,%r23 -$00000024 - SUB %r4,%r31,%r25 - AND %r25,%r19,%r26 - CMPB,*<>,N %r0,%r26,$00000046 ; (forward) - DEPD,Z %r25,31,32,%r20 - OR %r20,%r24,%r21 - CMPB,*<<,N %r21,%r23,$0000002A ;(backward) - SUB %r31,%r6,%r31 -;-------------Break path--------------------- - -$00000046 - DEPD,Z %r23,31,32,%r25 ;tl - EXTRD,U %r23,31,32,%r26 ;t - AND %r25,%r19,%r24 ;tl = (tl<<32)&0xfffffff0000000L - ADD,L %r31,%r26,%r31 ;th += t; - CMPCLR,*>>= %r5,%r24,%r0 ;if (l<tl) - LDO 1(%r31),%r31 ; th++; - CMPB,*<<=,N %r31,%r4,$00000036 ;if (n < th) (forward) - LDO -1(%r29),%r29 ;q--; - ADD,L %r4,%r3,%r4 ;h += d; -$00000036 - ADDIB,=,N -1,%r9,$D1 ;if (--count == 0) break (forward) - SUB %r5,%r24,%r28 ; l -= tl; - SUB %r4,%r31,%r24 ; h -= th; - SHRPD %r24,%r28,32,%r4 ; h = ((h<<32)|(l>>32)); - DEPD,Z %r29,31,32,%r10 ; ret = q<<32 - b $0000001C - DEPD,Z %r28,31,32,%r5 ; l = l << 32 - -$D1 - OR %r10,%r29,%r28 ; ret |= q -$D3 - LDD -368(%r30),%r2 -$D0 - LDD -296(%r30),%r10 - LDD -304(%r30),%r9 - LDD -312(%r30),%r8 - LDD -320(%r30),%r7 - LDD -328(%r30),%r6 - LDD -336(%r30),%r5 - LDD -344(%r30),%r4 - BVE (%r2) - .EXIT - LDD,MB -352(%r30),%r3 - -bn_div_err_case - MFIA %r6 - ADDIL L'bn_div_words-bn_div_err_case,%r6,%r1 - LDO R'bn_div_words-bn_div_err_case(%r1),%r6 - ADDIL LT'__iob,%r27,%r1 - LDD RT'__iob(%r1),%r26 - ADDIL L'C$4-bn_div_words,%r6,%r1 - LDO R'C$4-bn_div_words(%r1),%r25 - LDO 64(%r26),%r26 - .CALL ;in=24,25,26,29;out=28; - B,L fprintf,%r2 - LDO -48(%r30),%r29 - LDD -288(%r30),%r27 - .CALL ;in=29; - B,L abort,%r2 - LDO -48(%r30),%r29 - LDD -288(%r30),%r27 - B $D0 - LDD -368(%r30),%r2 - .PROCEND ;in=24,25,26,29;out=28; - -;---------------------------------------------------------------------------- -; -; Registers to hold 64-bit values to manipulate. The "L" part -; of the register corresponds to the upper 32-bits, while the "R" -; part corresponds to the lower 32-bits -; -; Note, that when using b6 and b7, the code must save these before -; using them because they are callee save registers -; -; -; Floating point registers to use to save values that -; are manipulated. These don't collide with ftemp1-6 and -; are all caller save registers -; -a0 .reg %fr22 -a0L .reg %fr22L -a0R .reg %fr22R - -a1 .reg %fr23 -a1L .reg %fr23L -a1R .reg %fr23R - -a2 .reg %fr24 -a2L .reg %fr24L -a2R .reg %fr24R - -a3 .reg %fr25 -a3L .reg %fr25L -a3R .reg %fr25R - -a4 .reg %fr26 -a4L .reg %fr26L -a4R .reg %fr26R - -a5 .reg %fr27 -a5L .reg %fr27L -a5R .reg %fr27R - -a6 .reg %fr28 -a6L .reg %fr28L -a6R .reg %fr28R - -a7 .reg %fr29 -a7L .reg %fr29L -a7R .reg %fr29R - -b0 .reg %fr30 -b0L .reg %fr30L -b0R .reg %fr30R - -b1 .reg %fr31 -b1L .reg %fr31L -b1R .reg %fr31R - -; -; Temporary floating point variables, these are all caller save -; registers -; -ftemp1 .reg %fr4 -ftemp2 .reg %fr5 -ftemp3 .reg %fr6 -ftemp4 .reg %fr7 - -; -; The B set of registers when used. -; - -b2 .reg %fr8 -b2L .reg %fr8L -b2R .reg %fr8R - -b3 .reg %fr9 -b3L .reg %fr9L -b3R .reg %fr9R - -b4 .reg %fr10 -b4L .reg %fr10L -b4R .reg %fr10R - -b5 .reg %fr11 -b5L .reg %fr11L -b5R .reg %fr11R - -b6 .reg %fr12 -b6L .reg %fr12L -b6R .reg %fr12R - -b7 .reg %fr13 -b7L .reg %fr13L -b7R .reg %fr13R - -c1 .reg %r21 ; only reg -temp1 .reg %r20 ; only reg -temp2 .reg %r19 ; only reg -temp3 .reg %r31 ; only reg - -m1 .reg %r28 -c2 .reg %r23 -high_one .reg %r1 -ht .reg %r6 -lt .reg %r5 -m .reg %r4 -c3 .reg %r3 - -SQR_ADD_C .macro A0L,A0R,C1,C2,C3 - XMPYU A0L,A0R,ftemp1 ; m - FSTD ftemp1,-24(%sp) ; store m - - XMPYU A0R,A0R,ftemp2 ; lt - FSTD ftemp2,-16(%sp) ; store lt - - XMPYU A0L,A0L,ftemp3 ; ht - FSTD ftemp3,-8(%sp) ; store ht - - LDD -24(%sp),m ; load m - AND m,high_mask,temp2 ; m & Mask - DEPD,Z m,30,31,temp3 ; m << 32+1 - LDD -16(%sp),lt ; lt - - LDD -8(%sp),ht ; ht - EXTRD,U temp2,32,33,temp1 ; temp1 = m&Mask >> 32-1 - ADD temp3,lt,lt ; lt = lt+m - ADD,L ht,temp1,ht ; ht += temp1 - ADD,DC ht,%r0,ht ; ht++ - - ADD C1,lt,C1 ; c1=c1+lt - ADD,DC ht,%r0,ht ; ht++ - - ADD C2,ht,C2 ; c2=c2+ht - ADD,DC C3,%r0,C3 ; c3++ -.endm - -SQR_ADD_C2 .macro A0L,A0R,A1L,A1R,C1,C2,C3 - XMPYU A0L,A1R,ftemp1 ; m1 = bl*ht - FSTD ftemp1,-16(%sp) ; - XMPYU A0R,A1L,ftemp2 ; m = bh*lt - FSTD ftemp2,-8(%sp) ; - XMPYU A0R,A1R,ftemp3 ; lt = bl*lt - FSTD ftemp3,-32(%sp) - XMPYU A0L,A1L,ftemp4 ; ht = bh*ht - FSTD ftemp4,-24(%sp) ; - - LDD -8(%sp),m ; r21 = m - LDD -16(%sp),m1 ; r19 = m1 - ADD,L m,m1,m ; m+m1 - - DEPD,Z m,31,32,temp3 ; (m+m1<<32) - LDD -24(%sp),ht ; r24 = ht - - CMPCLR,*>>= m,m1,%r0 ; if (m < m1) - ADD,L ht,high_one,ht ; ht+=high_one - - EXTRD,U m,31,32,temp1 ; m >> 32 - LDD -32(%sp),lt ; lt - ADD,L ht,temp1,ht ; ht+= m>>32 - ADD lt,temp3,lt ; lt = lt+m1 - ADD,DC ht,%r0,ht ; ht++ - - ADD ht,ht,ht ; ht=ht+ht; - ADD,DC C3,%r0,C3 ; add in carry (c3++) - - ADD lt,lt,lt ; lt=lt+lt; - ADD,DC ht,%r0,ht ; add in carry (ht++) - - ADD C1,lt,C1 ; c1=c1+lt - ADD,DC,*NUV ht,%r0,ht ; add in carry (ht++) - LDO 1(C3),C3 ; bump c3 if overflow,nullify otherwise - - ADD C2,ht,C2 ; c2 = c2 + ht - ADD,DC C3,%r0,C3 ; add in carry (c3++) -.endm - -; -;void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a) -; arg0 = r_ptr -; arg1 = a_ptr -; - -bn_sqr_comba8 - .PROC - .CALLINFO FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE - .EXPORT bn_sqr_comba8,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .ENTRY - .align 64 - - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - STD %r5,16(%sp) ; save r5 - STD %r6,24(%sp) ; save r6 - - ; - ; Zero out carries - ; - COPY %r0,c1 - COPY %r0,c2 - COPY %r0,c3 - - LDO 128(%sp),%sp ; bump stack - DEPDI,Z -1,32,33,high_mask ; Create Mask 0xffffffff80000000L - DEPDI,Z 1,31,1,high_one ; Create Value 1 << 32 - - ; - ; Load up all of the values we are going to use - ; - FLDD 0(a_ptr),a0 - FLDD 8(a_ptr),a1 - FLDD 16(a_ptr),a2 - FLDD 24(a_ptr),a3 - FLDD 32(a_ptr),a4 - FLDD 40(a_ptr),a5 - FLDD 48(a_ptr),a6 - FLDD 56(a_ptr),a7 - - SQR_ADD_C a0L,a0R,c1,c2,c3 - STD c1,0(r_ptr) ; r[0] = c1; - COPY %r0,c1 - - SQR_ADD_C2 a1L,a1R,a0L,a0R,c2,c3,c1 - STD c2,8(r_ptr) ; r[1] = c2; - COPY %r0,c2 - - SQR_ADD_C a1L,a1R,c3,c1,c2 - SQR_ADD_C2 a2L,a2R,a0L,a0R,c3,c1,c2 - STD c3,16(r_ptr) ; r[2] = c3; - COPY %r0,c3 - - SQR_ADD_C2 a3L,a3R,a0L,a0R,c1,c2,c3 - SQR_ADD_C2 a2L,a2R,a1L,a1R,c1,c2,c3 - STD c1,24(r_ptr) ; r[3] = c1; - COPY %r0,c1 - - SQR_ADD_C a2L,a2R,c2,c3,c1 - SQR_ADD_C2 a3L,a3R,a1L,a1R,c2,c3,c1 - SQR_ADD_C2 a4L,a4R,a0L,a0R,c2,c3,c1 - STD c2,32(r_ptr) ; r[4] = c2; - COPY %r0,c2 - - SQR_ADD_C2 a5L,a5R,a0L,a0R,c3,c1,c2 - SQR_ADD_C2 a4L,a4R,a1L,a1R,c3,c1,c2 - SQR_ADD_C2 a3L,a3R,a2L,a2R,c3,c1,c2 - STD c3,40(r_ptr) ; r[5] = c3; - COPY %r0,c3 - - SQR_ADD_C a3L,a3R,c1,c2,c3 - SQR_ADD_C2 a4L,a4R,a2L,a2R,c1,c2,c3 - SQR_ADD_C2 a5L,a5R,a1L,a1R,c1,c2,c3 - SQR_ADD_C2 a6L,a6R,a0L,a0R,c1,c2,c3 - STD c1,48(r_ptr) ; r[6] = c1; - COPY %r0,c1 - - SQR_ADD_C2 a7L,a7R,a0L,a0R,c2,c3,c1 - SQR_ADD_C2 a6L,a6R,a1L,a1R,c2,c3,c1 - SQR_ADD_C2 a5L,a5R,a2L,a2R,c2,c3,c1 - SQR_ADD_C2 a4L,a4R,a3L,a3R,c2,c3,c1 - STD c2,56(r_ptr) ; r[7] = c2; - COPY %r0,c2 - - SQR_ADD_C a4L,a4R,c3,c1,c2 - SQR_ADD_C2 a5L,a5R,a3L,a3R,c3,c1,c2 - SQR_ADD_C2 a6L,a6R,a2L,a2R,c3,c1,c2 - SQR_ADD_C2 a7L,a7R,a1L,a1R,c3,c1,c2 - STD c3,64(r_ptr) ; r[8] = c3; - COPY %r0,c3 - - SQR_ADD_C2 a7L,a7R,a2L,a2R,c1,c2,c3 - SQR_ADD_C2 a6L,a6R,a3L,a3R,c1,c2,c3 - SQR_ADD_C2 a5L,a5R,a4L,a4R,c1,c2,c3 - STD c1,72(r_ptr) ; r[9] = c1; - COPY %r0,c1 - - SQR_ADD_C a5L,a5R,c2,c3,c1 - SQR_ADD_C2 a6L,a6R,a4L,a4R,c2,c3,c1 - SQR_ADD_C2 a7L,a7R,a3L,a3R,c2,c3,c1 - STD c2,80(r_ptr) ; r[10] = c2; - COPY %r0,c2 - - SQR_ADD_C2 a7L,a7R,a4L,a4R,c3,c1,c2 - SQR_ADD_C2 a6L,a6R,a5L,a5R,c3,c1,c2 - STD c3,88(r_ptr) ; r[11] = c3; - COPY %r0,c3 - - SQR_ADD_C a6L,a6R,c1,c2,c3 - SQR_ADD_C2 a7L,a7R,a5L,a5R,c1,c2,c3 - STD c1,96(r_ptr) ; r[12] = c1; - COPY %r0,c1 - - SQR_ADD_C2 a7L,a7R,a6L,a6R,c2,c3,c1 - STD c2,104(r_ptr) ; r[13] = c2; - COPY %r0,c2 - - SQR_ADD_C a7L,a7R,c3,c1,c2 - STD c3, 112(r_ptr) ; r[14] = c3 - STD c1, 120(r_ptr) ; r[15] = c1 - - .EXIT - LDD -104(%sp),%r6 ; restore r6 - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 - - .PROCEND - -;----------------------------------------------------------------------------- -; -;void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a) -; arg0 = r_ptr -; arg1 = a_ptr -; - -bn_sqr_comba4 - .proc - .callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE - .EXPORT bn_sqr_comba4,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .entry - .align 64 - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - STD %r5,16(%sp) ; save r5 - STD %r6,24(%sp) ; save r6 - - ; - ; Zero out carries - ; - COPY %r0,c1 - COPY %r0,c2 - COPY %r0,c3 - - LDO 128(%sp),%sp ; bump stack - DEPDI,Z -1,32,33,high_mask ; Create Mask 0xffffffff80000000L - DEPDI,Z 1,31,1,high_one ; Create Value 1 << 32 - - ; - ; Load up all of the values we are going to use - ; - FLDD 0(a_ptr),a0 - FLDD 8(a_ptr),a1 - FLDD 16(a_ptr),a2 - FLDD 24(a_ptr),a3 - FLDD 32(a_ptr),a4 - FLDD 40(a_ptr),a5 - FLDD 48(a_ptr),a6 - FLDD 56(a_ptr),a7 - - SQR_ADD_C a0L,a0R,c1,c2,c3 - - STD c1,0(r_ptr) ; r[0] = c1; - COPY %r0,c1 - - SQR_ADD_C2 a1L,a1R,a0L,a0R,c2,c3,c1 - - STD c2,8(r_ptr) ; r[1] = c2; - COPY %r0,c2 - - SQR_ADD_C a1L,a1R,c3,c1,c2 - SQR_ADD_C2 a2L,a2R,a0L,a0R,c3,c1,c2 - - STD c3,16(r_ptr) ; r[2] = c3; - COPY %r0,c3 - - SQR_ADD_C2 a3L,a3R,a0L,a0R,c1,c2,c3 - SQR_ADD_C2 a2L,a2R,a1L,a1R,c1,c2,c3 - - STD c1,24(r_ptr) ; r[3] = c1; - COPY %r0,c1 - - SQR_ADD_C a2L,a2R,c2,c3,c1 - SQR_ADD_C2 a3L,a3R,a1L,a1R,c2,c3,c1 - - STD c2,32(r_ptr) ; r[4] = c2; - COPY %r0,c2 - - SQR_ADD_C2 a3L,a3R,a2L,a2R,c3,c1,c2 - STD c3,40(r_ptr) ; r[5] = c3; - COPY %r0,c3 - - SQR_ADD_C a3L,a3R,c1,c2,c3 - STD c1,48(r_ptr) ; r[6] = c1; - STD c2,56(r_ptr) ; r[7] = c2; - - .EXIT - LDD -104(%sp),%r6 ; restore r6 - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 - - .PROCEND - - -;--------------------------------------------------------------------------- - -MUL_ADD_C .macro A0L,A0R,B0L,B0R,C1,C2,C3 - XMPYU A0L,B0R,ftemp1 ; m1 = bl*ht - FSTD ftemp1,-16(%sp) ; - XMPYU A0R,B0L,ftemp2 ; m = bh*lt - FSTD ftemp2,-8(%sp) ; - XMPYU A0R,B0R,ftemp3 ; lt = bl*lt - FSTD ftemp3,-32(%sp) - XMPYU A0L,B0L,ftemp4 ; ht = bh*ht - FSTD ftemp4,-24(%sp) ; - - LDD -8(%sp),m ; r21 = m - LDD -16(%sp),m1 ; r19 = m1 - ADD,L m,m1,m ; m+m1 - - DEPD,Z m,31,32,temp3 ; (m+m1<<32) - LDD -24(%sp),ht ; r24 = ht - - CMPCLR,*>>= m,m1,%r0 ; if (m < m1) - ADD,L ht,high_one,ht ; ht+=high_one - - EXTRD,U m,31,32,temp1 ; m >> 32 - LDD -32(%sp),lt ; lt - ADD,L ht,temp1,ht ; ht+= m>>32 - ADD lt,temp3,lt ; lt = lt+m1 - ADD,DC ht,%r0,ht ; ht++ - - ADD C1,lt,C1 ; c1=c1+lt - ADD,DC ht,%r0,ht ; bump c3 if overflow,nullify otherwise - - ADD C2,ht,C2 ; c2 = c2 + ht - ADD,DC C3,%r0,C3 ; add in carry (c3++) -.endm - - -; -;void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) -; arg0 = r_ptr -; arg1 = a_ptr -; arg2 = b_ptr -; - -bn_mul_comba8 - .proc - .callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE - .EXPORT bn_mul_comba8,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .entry - .align 64 - - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - STD %r5,16(%sp) ; save r5 - STD %r6,24(%sp) ; save r6 - FSTD %fr12,32(%sp) ; save r6 - FSTD %fr13,40(%sp) ; save r7 - - ; - ; Zero out carries - ; - COPY %r0,c1 - COPY %r0,c2 - COPY %r0,c3 - - LDO 128(%sp),%sp ; bump stack - DEPDI,Z 1,31,1,high_one ; Create Value 1 << 32 - - ; - ; Load up all of the values we are going to use - ; - FLDD 0(a_ptr),a0 - FLDD 8(a_ptr),a1 - FLDD 16(a_ptr),a2 - FLDD 24(a_ptr),a3 - FLDD 32(a_ptr),a4 - FLDD 40(a_ptr),a5 - FLDD 48(a_ptr),a6 - FLDD 56(a_ptr),a7 - - FLDD 0(b_ptr),b0 - FLDD 8(b_ptr),b1 - FLDD 16(b_ptr),b2 - FLDD 24(b_ptr),b3 - FLDD 32(b_ptr),b4 - FLDD 40(b_ptr),b5 - FLDD 48(b_ptr),b6 - FLDD 56(b_ptr),b7 - - MUL_ADD_C a0L,a0R,b0L,b0R,c1,c2,c3 - STD c1,0(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a0L,a0R,b1L,b1R,c2,c3,c1 - MUL_ADD_C a1L,a1R,b0L,b0R,c2,c3,c1 - STD c2,8(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a2L,a2R,b0L,b0R,c3,c1,c2 - MUL_ADD_C a1L,a1R,b1L,b1R,c3,c1,c2 - MUL_ADD_C a0L,a0R,b2L,b2R,c3,c1,c2 - STD c3,16(r_ptr) - COPY %r0,c3 - - MUL_ADD_C a0L,a0R,b3L,b3R,c1,c2,c3 - MUL_ADD_C a1L,a1R,b2L,b2R,c1,c2,c3 - MUL_ADD_C a2L,a2R,b1L,b1R,c1,c2,c3 - MUL_ADD_C a3L,a3R,b0L,b0R,c1,c2,c3 - STD c1,24(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a4L,a4R,b0L,b0R,c2,c3,c1 - MUL_ADD_C a3L,a3R,b1L,b1R,c2,c3,c1 - MUL_ADD_C a2L,a2R,b2L,b2R,c2,c3,c1 - MUL_ADD_C a1L,a1R,b3L,b3R,c2,c3,c1 - MUL_ADD_C a0L,a0R,b4L,b4R,c2,c3,c1 - STD c2,32(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a0L,a0R,b5L,b5R,c3,c1,c2 - MUL_ADD_C a1L,a1R,b4L,b4R,c3,c1,c2 - MUL_ADD_C a2L,a2R,b3L,b3R,c3,c1,c2 - MUL_ADD_C a3L,a3R,b2L,b2R,c3,c1,c2 - MUL_ADD_C a4L,a4R,b1L,b1R,c3,c1,c2 - MUL_ADD_C a5L,a5R,b0L,b0R,c3,c1,c2 - STD c3,40(r_ptr) - COPY %r0,c3 - - MUL_ADD_C a6L,a6R,b0L,b0R,c1,c2,c3 - MUL_ADD_C a5L,a5R,b1L,b1R,c1,c2,c3 - MUL_ADD_C a4L,a4R,b2L,b2R,c1,c2,c3 - MUL_ADD_C a3L,a3R,b3L,b3R,c1,c2,c3 - MUL_ADD_C a2L,a2R,b4L,b4R,c1,c2,c3 - MUL_ADD_C a1L,a1R,b5L,b5R,c1,c2,c3 - MUL_ADD_C a0L,a0R,b6L,b6R,c1,c2,c3 - STD c1,48(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a0L,a0R,b7L,b7R,c2,c3,c1 - MUL_ADD_C a1L,a1R,b6L,b6R,c2,c3,c1 - MUL_ADD_C a2L,a2R,b5L,b5R,c2,c3,c1 - MUL_ADD_C a3L,a3R,b4L,b4R,c2,c3,c1 - MUL_ADD_C a4L,a4R,b3L,b3R,c2,c3,c1 - MUL_ADD_C a5L,a5R,b2L,b2R,c2,c3,c1 - MUL_ADD_C a6L,a6R,b1L,b1R,c2,c3,c1 - MUL_ADD_C a7L,a7R,b0L,b0R,c2,c3,c1 - STD c2,56(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a7L,a7R,b1L,b1R,c3,c1,c2 - MUL_ADD_C a6L,a6R,b2L,b2R,c3,c1,c2 - MUL_ADD_C a5L,a5R,b3L,b3R,c3,c1,c2 - MUL_ADD_C a4L,a4R,b4L,b4R,c3,c1,c2 - MUL_ADD_C a3L,a3R,b5L,b5R,c3,c1,c2 - MUL_ADD_C a2L,a2R,b6L,b6R,c3,c1,c2 - MUL_ADD_C a1L,a1R,b7L,b7R,c3,c1,c2 - STD c3,64(r_ptr) - COPY %r0,c3 - - MUL_ADD_C a2L,a2R,b7L,b7R,c1,c2,c3 - MUL_ADD_C a3L,a3R,b6L,b6R,c1,c2,c3 - MUL_ADD_C a4L,a4R,b5L,b5R,c1,c2,c3 - MUL_ADD_C a5L,a5R,b4L,b4R,c1,c2,c3 - MUL_ADD_C a6L,a6R,b3L,b3R,c1,c2,c3 - MUL_ADD_C a7L,a7R,b2L,b2R,c1,c2,c3 - STD c1,72(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a7L,a7R,b3L,b3R,c2,c3,c1 - MUL_ADD_C a6L,a6R,b4L,b4R,c2,c3,c1 - MUL_ADD_C a5L,a5R,b5L,b5R,c2,c3,c1 - MUL_ADD_C a4L,a4R,b6L,b6R,c2,c3,c1 - MUL_ADD_C a3L,a3R,b7L,b7R,c2,c3,c1 - STD c2,80(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a4L,a4R,b7L,b7R,c3,c1,c2 - MUL_ADD_C a5L,a5R,b6L,b6R,c3,c1,c2 - MUL_ADD_C a6L,a6R,b5L,b5R,c3,c1,c2 - MUL_ADD_C a7L,a7R,b4L,b4R,c3,c1,c2 - STD c3,88(r_ptr) - COPY %r0,c3 - - MUL_ADD_C a7L,a7R,b5L,b5R,c1,c2,c3 - MUL_ADD_C a6L,a6R,b6L,b6R,c1,c2,c3 - MUL_ADD_C a5L,a5R,b7L,b7R,c1,c2,c3 - STD c1,96(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a6L,a6R,b7L,b7R,c2,c3,c1 - MUL_ADD_C a7L,a7R,b6L,b6R,c2,c3,c1 - STD c2,104(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a7L,a7R,b7L,b7R,c3,c1,c2 - STD c3,112(r_ptr) - STD c1,120(r_ptr) - - .EXIT - FLDD -88(%sp),%fr13 - FLDD -96(%sp),%fr12 - LDD -104(%sp),%r6 ; restore r6 - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 - - .PROCEND - -;----------------------------------------------------------------------------- -; -;void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) -; arg0 = r_ptr -; arg1 = a_ptr -; arg2 = b_ptr -; - -bn_mul_comba4 - .proc - .callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE - .EXPORT bn_mul_comba4,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN - .entry - .align 64 - - STD %r3,0(%sp) ; save r3 - STD %r4,8(%sp) ; save r4 - STD %r5,16(%sp) ; save r5 - STD %r6,24(%sp) ; save r6 - FSTD %fr12,32(%sp) ; save r6 - FSTD %fr13,40(%sp) ; save r7 - - ; - ; Zero out carries - ; - COPY %r0,c1 - COPY %r0,c2 - COPY %r0,c3 - - LDO 128(%sp),%sp ; bump stack - DEPDI,Z 1,31,1,high_one ; Create Value 1 << 32 - - ; - ; Load up all of the values we are going to use - ; - FLDD 0(a_ptr),a0 - FLDD 8(a_ptr),a1 - FLDD 16(a_ptr),a2 - FLDD 24(a_ptr),a3 - - FLDD 0(b_ptr),b0 - FLDD 8(b_ptr),b1 - FLDD 16(b_ptr),b2 - FLDD 24(b_ptr),b3 - - MUL_ADD_C a0L,a0R,b0L,b0R,c1,c2,c3 - STD c1,0(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a0L,a0R,b1L,b1R,c2,c3,c1 - MUL_ADD_C a1L,a1R,b0L,b0R,c2,c3,c1 - STD c2,8(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a2L,a2R,b0L,b0R,c3,c1,c2 - MUL_ADD_C a1L,a1R,b1L,b1R,c3,c1,c2 - MUL_ADD_C a0L,a0R,b2L,b2R,c3,c1,c2 - STD c3,16(r_ptr) - COPY %r0,c3 - - MUL_ADD_C a0L,a0R,b3L,b3R,c1,c2,c3 - MUL_ADD_C a1L,a1R,b2L,b2R,c1,c2,c3 - MUL_ADD_C a2L,a2R,b1L,b1R,c1,c2,c3 - MUL_ADD_C a3L,a3R,b0L,b0R,c1,c2,c3 - STD c1,24(r_ptr) - COPY %r0,c1 - - MUL_ADD_C a3L,a3R,b1L,b1R,c2,c3,c1 - MUL_ADD_C a2L,a2R,b2L,b2R,c2,c3,c1 - MUL_ADD_C a1L,a1R,b3L,b3R,c2,c3,c1 - STD c2,32(r_ptr) - COPY %r0,c2 - - MUL_ADD_C a2L,a2R,b3L,b3R,c3,c1,c2 - MUL_ADD_C a3L,a3R,b2L,b2R,c3,c1,c2 - STD c3,40(r_ptr) - COPY %r0,c3 - - MUL_ADD_C a3L,a3R,b3L,b3R,c1,c2,c3 - STD c1,48(r_ptr) - STD c2,56(r_ptr) - - .EXIT - FLDD -88(%sp),%fr13 - FLDD -96(%sp),%fr12 - LDD -104(%sp),%r6 ; restore r6 - LDD -112(%sp),%r5 ; restore r5 - LDD -120(%sp),%r4 ; restore r4 - BVE (%rp) - LDD,MB -128(%sp),%r3 - - .PROCEND - - - .SPACE $TEXT$ - .SUBSPA $CODE$ - .SPACE $PRIVATE$,SORT=16 - .IMPORT $global$,DATA - .SPACE $TEXT$ - .SUBSPA $CODE$ - .SUBSPA $LIT$,ACCESS=0x2c -C$4 - .ALIGN 8 - .STRINGZ "Division would overflow (%d)\n" - .END diff --git a/app/openssl/crypto/bn/asm/ppc-mont.pl b/app/openssl/crypto/bn/asm/ppc-mont.pl deleted file mode 100644 index 7849eae9..00000000 --- a/app/openssl/crypto/bn/asm/ppc-mont.pl +++ /dev/null @@ -1,323 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# April 2006 - -# "Teaser" Montgomery multiplication module for PowerPC. It's possible -# to gain a bit more by modulo-scheduling outer loop, then dedicated -# squaring procedure should give further 20% and code can be adapted -# for 32-bit application running on 64-bit CPU. As for the latter. -# It won't be able to achieve "native" 64-bit performance, because in -# 32-bit application context every addc instruction will have to be -# expanded as addc, twice right shift by 32 and finally adde, etc. -# So far RSA *sign* performance improvement over pre-bn_mul_mont asm -# for 64-bit application running on PPC970/G5 is: -# -# 512-bit +65% -# 1024-bit +35% -# 2048-bit +18% -# 4096-bit +4% - -$flavour = shift; - -if ($flavour =~ /32/) { - $BITS= 32; - $BNSZ= $BITS/8; - $SIZE_T=4; - $RZONE= 224; - $FRAME= $SIZE_T*16; - - $LD= "lwz"; # load - $LDU= "lwzu"; # load and update - $LDX= "lwzx"; # load indexed - $ST= "stw"; # store - $STU= "stwu"; # store and update - $STX= "stwx"; # store indexed - $STUX= "stwux"; # store indexed and update - $UMULL= "mullw"; # unsigned multiply low - $UMULH= "mulhwu"; # unsigned multiply high - $UCMP= "cmplw"; # unsigned compare - $SHRI= "srwi"; # unsigned shift right by immediate - $PUSH= $ST; - $POP= $LD; -} elsif ($flavour =~ /64/) { - $BITS= 64; - $BNSZ= $BITS/8; - $SIZE_T=8; - $RZONE= 288; - $FRAME= $SIZE_T*16; - - # same as above, but 64-bit mnemonics... - $LD= "ld"; # load - $LDU= "ldu"; # load and update - $LDX= "ldx"; # load indexed - $ST= "std"; # store - $STU= "stdu"; # store and update - $STX= "stdx"; # store indexed - $STUX= "stdux"; # store indexed and update - $UMULL= "mulld"; # unsigned multiply low - $UMULH= "mulhdu"; # unsigned multiply high - $UCMP= "cmpld"; # unsigned compare - $SHRI= "srdi"; # unsigned shift right by immediate - $PUSH= $ST; - $POP= $LD; -} else { die "nonsense $flavour"; } - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or -( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or -die "can't locate ppc-xlate.pl"; - -open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!"; - -$sp="r1"; -$toc="r2"; -$rp="r3"; $ovf="r3"; -$ap="r4"; -$bp="r5"; -$np="r6"; -$n0="r7"; -$num="r8"; -$rp="r9"; # $rp is reassigned -$aj="r10"; -$nj="r11"; -$tj="r12"; -# non-volatile registers -$i="r14"; -$j="r15"; -$tp="r16"; -$m0="r17"; -$m1="r18"; -$lo0="r19"; -$hi0="r20"; -$lo1="r21"; -$hi1="r22"; -$alo="r23"; -$ahi="r24"; -$nlo="r25"; -# -$nhi="r0"; - -$code=<<___; -.machine "any" -.text - -.globl .bn_mul_mont -.align 4 -.bn_mul_mont: - cmpwi $num,4 - mr $rp,r3 ; $rp is reassigned - li r3,0 - bltlr - - slwi $num,$num,`log($BNSZ)/log(2)` - li $tj,-4096 - addi $ovf,$num,`$FRAME+$RZONE` - subf $ovf,$ovf,$sp ; $sp-$ovf - and $ovf,$ovf,$tj ; minimize TLB usage - subf $ovf,$sp,$ovf ; $ovf-$sp - srwi $num,$num,`log($BNSZ)/log(2)` - $STUX $sp,$sp,$ovf - - $PUSH r14,`4*$SIZE_T`($sp) - $PUSH r15,`5*$SIZE_T`($sp) - $PUSH r16,`6*$SIZE_T`($sp) - $PUSH r17,`7*$SIZE_T`($sp) - $PUSH r18,`8*$SIZE_T`($sp) - $PUSH r19,`9*$SIZE_T`($sp) - $PUSH r20,`10*$SIZE_T`($sp) - $PUSH r21,`11*$SIZE_T`($sp) - $PUSH r22,`12*$SIZE_T`($sp) - $PUSH r23,`13*$SIZE_T`($sp) - $PUSH r24,`14*$SIZE_T`($sp) - $PUSH r25,`15*$SIZE_T`($sp) - - $LD $n0,0($n0) ; pull n0[0] value - addi $num,$num,-2 ; adjust $num for counter register - - $LD $m0,0($bp) ; m0=bp[0] - $LD $aj,0($ap) ; ap[0] - addi $tp,$sp,$FRAME - $UMULL $lo0,$aj,$m0 ; ap[0]*bp[0] - $UMULH $hi0,$aj,$m0 - - $LD $aj,$BNSZ($ap) ; ap[1] - $LD $nj,0($np) ; np[0] - - $UMULL $m1,$lo0,$n0 ; "tp[0]"*n0 - - $UMULL $alo,$aj,$m0 ; ap[1]*bp[0] - $UMULH $ahi,$aj,$m0 - - $UMULL $lo1,$nj,$m1 ; np[0]*m1 - $UMULH $hi1,$nj,$m1 - $LD $nj,$BNSZ($np) ; np[1] - addc $lo1,$lo1,$lo0 - addze $hi1,$hi1 - - $UMULL $nlo,$nj,$m1 ; np[1]*m1 - $UMULH $nhi,$nj,$m1 - - mtctr $num - li $j,`2*$BNSZ` -.align 4 -L1st: - $LDX $aj,$ap,$j ; ap[j] - addc $lo0,$alo,$hi0 - $LDX $nj,$np,$j ; np[j] - addze $hi0,$ahi - $UMULL $alo,$aj,$m0 ; ap[j]*bp[0] - addc $lo1,$nlo,$hi1 - $UMULH $ahi,$aj,$m0 - addze $hi1,$nhi - $UMULL $nlo,$nj,$m1 ; np[j]*m1 - addc $lo1,$lo1,$lo0 ; np[j]*m1+ap[j]*bp[0] - $UMULH $nhi,$nj,$m1 - addze $hi1,$hi1 - $ST $lo1,0($tp) ; tp[j-1] - - addi $j,$j,$BNSZ ; j++ - addi $tp,$tp,$BNSZ ; tp++ - bdnz- L1st -;L1st - addc $lo0,$alo,$hi0 - addze $hi0,$ahi - - addc $lo1,$nlo,$hi1 - addze $hi1,$nhi - addc $lo1,$lo1,$lo0 ; np[j]*m1+ap[j]*bp[0] - addze $hi1,$hi1 - $ST $lo1,0($tp) ; tp[j-1] - - li $ovf,0 - addc $hi1,$hi1,$hi0 - addze $ovf,$ovf ; upmost overflow bit - $ST $hi1,$BNSZ($tp) - - li $i,$BNSZ -.align 4 -Louter: - $LDX $m0,$bp,$i ; m0=bp[i] - $LD $aj,0($ap) ; ap[0] - addi $tp,$sp,$FRAME - $LD $tj,$FRAME($sp) ; tp[0] - $UMULL $lo0,$aj,$m0 ; ap[0]*bp[i] - $UMULH $hi0,$aj,$m0 - $LD $aj,$BNSZ($ap) ; ap[1] - $LD $nj,0($np) ; np[0] - addc $lo0,$lo0,$tj ; ap[0]*bp[i]+tp[0] - $UMULL $alo,$aj,$m0 ; ap[j]*bp[i] - addze $hi0,$hi0 - $UMULL $m1,$lo0,$n0 ; tp[0]*n0 - $UMULH $ahi,$aj,$m0 - $UMULL $lo1,$nj,$m1 ; np[0]*m1 - $UMULH $hi1,$nj,$m1 - $LD $nj,$BNSZ($np) ; np[1] - addc $lo1,$lo1,$lo0 - $UMULL $nlo,$nj,$m1 ; np[1]*m1 - addze $hi1,$hi1 - $UMULH $nhi,$nj,$m1 - - mtctr $num - li $j,`2*$BNSZ` -.align 4 -Linner: - $LDX $aj,$ap,$j ; ap[j] - addc $lo0,$alo,$hi0 - $LD $tj,$BNSZ($tp) ; tp[j] - addze $hi0,$ahi - $LDX $nj,$np,$j ; np[j] - addc $lo1,$nlo,$hi1 - $UMULL $alo,$aj,$m0 ; ap[j]*bp[i] - addze $hi1,$nhi - $UMULH $ahi,$aj,$m0 - addc $lo0,$lo0,$tj ; ap[j]*bp[i]+tp[j] - $UMULL $nlo,$nj,$m1 ; np[j]*m1 - addze $hi0,$hi0 - $UMULH $nhi,$nj,$m1 - addc $lo1,$lo1,$lo0 ; np[j]*m1+ap[j]*bp[i]+tp[j] - addi $j,$j,$BNSZ ; j++ - addze $hi1,$hi1 - $ST $lo1,0($tp) ; tp[j-1] - addi $tp,$tp,$BNSZ ; tp++ - bdnz- Linner -;Linner - $LD $tj,$BNSZ($tp) ; tp[j] - addc $lo0,$alo,$hi0 - addze $hi0,$ahi - addc $lo0,$lo0,$tj ; ap[j]*bp[i]+tp[j] - addze $hi0,$hi0 - - addc $lo1,$nlo,$hi1 - addze $hi1,$nhi - addc $lo1,$lo1,$lo0 ; np[j]*m1+ap[j]*bp[i]+tp[j] - addze $hi1,$hi1 - $ST $lo1,0($tp) ; tp[j-1] - - addic $ovf,$ovf,-1 ; move upmost overflow to XER[CA] - li $ovf,0 - adde $hi1,$hi1,$hi0 - addze $ovf,$ovf - $ST $hi1,$BNSZ($tp) -; - slwi $tj,$num,`log($BNSZ)/log(2)` - $UCMP $i,$tj - addi $i,$i,$BNSZ - ble- Louter - - addi $num,$num,2 ; restore $num - subfc $j,$j,$j ; j=0 and "clear" XER[CA] - addi $tp,$sp,$FRAME - mtctr $num - -.align 4 -Lsub: $LDX $tj,$tp,$j - $LDX $nj,$np,$j - subfe $aj,$nj,$tj ; tp[j]-np[j] - $STX $aj,$rp,$j - addi $j,$j,$BNSZ - bdnz- Lsub - - li $j,0 - mtctr $num - subfe $ovf,$j,$ovf ; handle upmost overflow bit - and $ap,$tp,$ovf - andc $np,$rp,$ovf - or $ap,$ap,$np ; ap=borrow?tp:rp - -.align 4 -Lcopy: ; copy or in-place refresh - $LDX $tj,$ap,$j - $STX $tj,$rp,$j - $STX $j,$tp,$j ; zap at once - addi $j,$j,$BNSZ - bdnz- Lcopy - - $POP r14,`4*$SIZE_T`($sp) - $POP r15,`5*$SIZE_T`($sp) - $POP r16,`6*$SIZE_T`($sp) - $POP r17,`7*$SIZE_T`($sp) - $POP r18,`8*$SIZE_T`($sp) - $POP r19,`9*$SIZE_T`($sp) - $POP r20,`10*$SIZE_T`($sp) - $POP r21,`11*$SIZE_T`($sp) - $POP r22,`12*$SIZE_T`($sp) - $POP r23,`13*$SIZE_T`($sp) - $POP r24,`14*$SIZE_T`($sp) - $POP r25,`15*$SIZE_T`($sp) - $POP $sp,0($sp) - li r3,1 - blr - .long 0 -.asciz "Montgomery Multiplication for PPC, CRYPTOGAMS by <appro\@fy.chalmers.se>" -___ - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -print $code; -close STDOUT; diff --git a/app/openssl/crypto/bn/asm/ppc.pl b/app/openssl/crypto/bn/asm/ppc.pl deleted file mode 100644 index 37c65d35..00000000 --- a/app/openssl/crypto/bn/asm/ppc.pl +++ /dev/null @@ -1,1981 +0,0 @@ -#!/usr/bin/env perl -# -# Implemented as a Perl wrapper as we want to support several different -# architectures with single file. We pick up the target based on the -# file name we are asked to generate. -# -# It should be noted though that this perl code is nothing like -# <openssl>/crypto/perlasm/x86*. In this case perl is used pretty much -# as pre-processor to cover for platform differences in name decoration, -# linker tables, 32-/64-bit instruction sets... -# -# As you might know there're several PowerPC ABI in use. Most notably -# Linux and AIX use different 32-bit ABIs. Good news are that these ABIs -# are similar enough to implement leaf(!) functions, which would be ABI -# neutral. And that's what you find here: ABI neutral leaf functions. -# In case you wonder what that is... -# -# AIX performance -# -# MEASUREMENTS WITH cc ON a 200 MhZ PowerPC 604e. -# -# The following is the performance of 32-bit compiler -# generated code: -# -# OpenSSL 0.9.6c 21 dec 2001 -# built on: Tue Jun 11 11:06:51 EDT 2002 -# options:bn(64,32) ... -#compiler: cc -DTHREADS -DAIX -DB_ENDIAN -DBN_LLONG -O3 -# sign verify sign/s verify/s -#rsa 512 bits 0.0098s 0.0009s 102.0 1170.6 -#rsa 1024 bits 0.0507s 0.0026s 19.7 387.5 -#rsa 2048 bits 0.3036s 0.0085s 3.3 117.1 -#rsa 4096 bits 2.0040s 0.0299s 0.5 33.4 -#dsa 512 bits 0.0087s 0.0106s 114.3 94.5 -#dsa 1024 bits 0.0256s 0.0313s 39.0 32.0 -# -# Same bechmark with this assembler code: -# -#rsa 512 bits 0.0056s 0.0005s 178.6 2049.2 -#rsa 1024 bits 0.0283s 0.0015s 35.3 674.1 -#rsa 2048 bits 0.1744s 0.0050s 5.7 201.2 -#rsa 4096 bits 1.1644s 0.0179s 0.9 55.7 -#dsa 512 bits 0.0052s 0.0062s 191.6 162.0 -#dsa 1024 bits 0.0149s 0.0180s 67.0 55.5 -# -# Number of operations increases by at almost 75% -# -# Here are performance numbers for 64-bit compiler -# generated code: -# -# OpenSSL 0.9.6g [engine] 9 Aug 2002 -# built on: Fri Apr 18 16:59:20 EDT 2003 -# options:bn(64,64) ... -# compiler: cc -DTHREADS -D_REENTRANT -q64 -DB_ENDIAN -O3 -# sign verify sign/s verify/s -#rsa 512 bits 0.0028s 0.0003s 357.1 3844.4 -#rsa 1024 bits 0.0148s 0.0008s 67.5 1239.7 -#rsa 2048 bits 0.0963s 0.0028s 10.4 353.0 -#rsa 4096 bits 0.6538s 0.0102s 1.5 98.1 -#dsa 512 bits 0.0026s 0.0032s 382.5 313.7 -#dsa 1024 bits 0.0081s 0.0099s 122.8 100.6 -# -# Same benchmark with this assembler code: -# -#rsa 512 bits 0.0020s 0.0002s 510.4 6273.7 -#rsa 1024 bits 0.0088s 0.0005s 114.1 2128.3 -#rsa 2048 bits 0.0540s 0.0016s 18.5 622.5 -#rsa 4096 bits 0.3700s 0.0058s 2.7 171.0 -#dsa 512 bits 0.0016s 0.0020s 610.7 507.1 -#dsa 1024 bits 0.0047s 0.0058s 212.5 173.2 -# -# Again, performance increases by at about 75% -# -# Mac OS X, Apple G5 1.8GHz (Note this is 32 bit code) -# OpenSSL 0.9.7c 30 Sep 2003 -# -# Original code. -# -#rsa 512 bits 0.0011s 0.0001s 906.1 11012.5 -#rsa 1024 bits 0.0060s 0.0003s 166.6 3363.1 -#rsa 2048 bits 0.0370s 0.0010s 27.1 982.4 -#rsa 4096 bits 0.2426s 0.0036s 4.1 280.4 -#dsa 512 bits 0.0010s 0.0012s 1038.1 841.5 -#dsa 1024 bits 0.0030s 0.0037s 329.6 269.7 -#dsa 2048 bits 0.0101s 0.0127s 98.9 78.6 -# -# Same benchmark with this assembler code: -# -#rsa 512 bits 0.0007s 0.0001s 1416.2 16645.9 -#rsa 1024 bits 0.0036s 0.0002s 274.4 5380.6 -#rsa 2048 bits 0.0222s 0.0006s 45.1 1589.5 -#rsa 4096 bits 0.1469s 0.0022s 6.8 449.6 -#dsa 512 bits 0.0006s 0.0007s 1664.2 1376.2 -#dsa 1024 bits 0.0018s 0.0023s 545.0 442.2 -#dsa 2048 bits 0.0061s 0.0075s 163.5 132.8 -# -# Performance increase of ~60% -# -# If you have comments or suggestions to improve code send -# me a note at schari@us.ibm.com -# - -$flavour = shift; - -if ($flavour =~ /32/) { - $BITS= 32; - $BNSZ= $BITS/8; - $ISA= "\"ppc\""; - - $LD= "lwz"; # load - $LDU= "lwzu"; # load and update - $ST= "stw"; # store - $STU= "stwu"; # store and update - $UMULL= "mullw"; # unsigned multiply low - $UMULH= "mulhwu"; # unsigned multiply high - $UDIV= "divwu"; # unsigned divide - $UCMPI= "cmplwi"; # unsigned compare with immediate - $UCMP= "cmplw"; # unsigned compare - $CNTLZ= "cntlzw"; # count leading zeros - $SHL= "slw"; # shift left - $SHR= "srw"; # unsigned shift right - $SHRI= "srwi"; # unsigned shift right by immediate - $SHLI= "slwi"; # shift left by immediate - $CLRU= "clrlwi"; # clear upper bits - $INSR= "insrwi"; # insert right - $ROTL= "rotlwi"; # rotate left by immediate - $TR= "tw"; # conditional trap -} elsif ($flavour =~ /64/) { - $BITS= 64; - $BNSZ= $BITS/8; - $ISA= "\"ppc64\""; - - # same as above, but 64-bit mnemonics... - $LD= "ld"; # load - $LDU= "ldu"; # load and update - $ST= "std"; # store - $STU= "stdu"; # store and update - $UMULL= "mulld"; # unsigned multiply low - $UMULH= "mulhdu"; # unsigned multiply high - $UDIV= "divdu"; # unsigned divide - $UCMPI= "cmpldi"; # unsigned compare with immediate - $UCMP= "cmpld"; # unsigned compare - $CNTLZ= "cntlzd"; # count leading zeros - $SHL= "sld"; # shift left - $SHR= "srd"; # unsigned shift right - $SHRI= "srdi"; # unsigned shift right by immediate - $SHLI= "sldi"; # shift left by immediate - $CLRU= "clrldi"; # clear upper bits - $INSR= "insrdi"; # insert right - $ROTL= "rotldi"; # rotate left by immediate - $TR= "td"; # conditional trap -} else { die "nonsense $flavour"; } - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or -( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or -die "can't locate ppc-xlate.pl"; - -open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!"; - -$data=<<EOF; -#-------------------------------------------------------------------- -# -# -# -# -# File: ppc32.s -# -# Created by: Suresh Chari -# IBM Thomas J. Watson Research Library -# Hawthorne, NY -# -# -# Description: Optimized assembly routines for OpenSSL crypto -# on the 32 bitPowerPC platform. -# -# -# Version History -# -# 2. Fixed bn_add,bn_sub and bn_div_words, added comments, -# cleaned up code. Also made a single version which can -# be used for both the AIX and Linux compilers. See NOTE -# below. -# 12/05/03 Suresh Chari -# (with lots of help from) Andy Polyakov -## -# 1. Initial version 10/20/02 Suresh Chari -# -# -# The following file works for the xlc,cc -# and gcc compilers. -# -# NOTE: To get the file to link correctly with the gcc compiler -# you have to change the names of the routines and remove -# the first .(dot) character. This should automatically -# be done in the build process. -# -# Hand optimized assembly code for the following routines -# -# bn_sqr_comba4 -# bn_sqr_comba8 -# bn_mul_comba4 -# bn_mul_comba8 -# bn_sub_words -# bn_add_words -# bn_div_words -# bn_sqr_words -# bn_mul_words -# bn_mul_add_words -# -# NOTE: It is possible to optimize this code more for -# specific PowerPC or Power architectures. On the Northstar -# architecture the optimizations in this file do -# NOT provide much improvement. -# -# If you have comments or suggestions to improve code send -# me a note at schari\@us.ibm.com -# -#-------------------------------------------------------------------------- -# -# Defines to be used in the assembly code. -# -#.set r0,0 # we use it as storage for value of 0 -#.set SP,1 # preserved -#.set RTOC,2 # preserved -#.set r3,3 # 1st argument/return value -#.set r4,4 # 2nd argument/volatile register -#.set r5,5 # 3rd argument/volatile register -#.set r6,6 # ... -#.set r7,7 -#.set r8,8 -#.set r9,9 -#.set r10,10 -#.set r11,11 -#.set r12,12 -#.set r13,13 # not used, nor any other "below" it... - -# Declare function names to be global -# NOTE: For gcc these names MUST be changed to remove -# the first . i.e. for example change ".bn_sqr_comba4" -# to "bn_sqr_comba4". This should be automatically done -# in the build. - - .globl .bn_sqr_comba4 - .globl .bn_sqr_comba8 - .globl .bn_mul_comba4 - .globl .bn_mul_comba8 - .globl .bn_sub_words - .globl .bn_add_words - .globl .bn_div_words - .globl .bn_sqr_words - .globl .bn_mul_words - .globl .bn_mul_add_words - -# .text section - - .machine "any" - -# -# NOTE: The following label name should be changed to -# "bn_sqr_comba4" i.e. remove the first dot -# for the gcc compiler. This should be automatically -# done in the build -# - -.align 4 -.bn_sqr_comba4: -# -# Optimized version of bn_sqr_comba4. -# -# void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a) -# r3 contains r -# r4 contains a -# -# Freely use registers r5,r6,r7,r8,r9,r10,r11 as follows: -# -# r5,r6 are the two BN_ULONGs being multiplied. -# r7,r8 are the results of the 32x32 giving 64 bit multiply. -# r9,r10, r11 are the equivalents of c1,c2, c3. -# Here's the assembly -# -# - xor r0,r0,r0 # set r0 = 0. Used in the addze - # instructions below - - #sqr_add_c(a,0,c1,c2,c3) - $LD r5,`0*$BNSZ`(r4) - $UMULL r9,r5,r5 - $UMULH r10,r5,r5 #in first iteration. No need - #to add since c1=c2=c3=0. - # Note c3(r11) is NOT set to 0 - # but will be. - - $ST r9,`0*$BNSZ`(r3) # r[0]=c1; - # sqr_add_c2(a,1,0,c2,c3,c1); - $LD r6,`1*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r7,r7,r7 # compute (r7,r8)=2*(r7,r8) - adde r8,r8,r8 - addze r9,r0 # catch carry if any. - # r9= r0(=0) and carry - - addc r10,r7,r10 # now add to temp result. - addze r11,r8 # r8 added to r11 which is 0 - addze r9,r9 - - $ST r10,`1*$BNSZ`(r3) #r[1]=c2; - #sqr_add_c(a,1,c3,c1,c2) - $UMULL r7,r6,r6 - $UMULH r8,r6,r6 - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r0 - #sqr_add_c2(a,2,0,c3,c1,c2) - $LD r6,`2*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r7,r7,r7 - adde r8,r8,r8 - addze r10,r10 - - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - $ST r11,`2*$BNSZ`(r3) #r[2]=c3 - #sqr_add_c2(a,3,0,c1,c2,c3); - $LD r6,`3*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r7,r7,r7 - adde r8,r8,r8 - addze r11,r0 - - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - #sqr_add_c2(a,2,1,c1,c2,c3); - $LD r5,`1*$BNSZ`(r4) - $LD r6,`2*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r7,r7,r7 - adde r8,r8,r8 - addze r11,r11 - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - $ST r9,`3*$BNSZ`(r3) #r[3]=c1 - #sqr_add_c(a,2,c2,c3,c1); - $UMULL r7,r6,r6 - $UMULH r8,r6,r6 - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r0 - #sqr_add_c2(a,3,1,c2,c3,c1); - $LD r6,`3*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r7,r7,r7 - adde r8,r8,r8 - addze r9,r9 - - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - $ST r10,`4*$BNSZ`(r3) #r[4]=c2 - #sqr_add_c2(a,3,2,c3,c1,c2); - $LD r5,`2*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r7,r7,r7 - adde r8,r8,r8 - addze r10,r0 - - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - $ST r11,`5*$BNSZ`(r3) #r[5] = c3 - #sqr_add_c(a,3,c1,c2,c3); - $UMULL r7,r6,r6 - $UMULH r8,r6,r6 - addc r9,r7,r9 - adde r10,r8,r10 - - $ST r9,`6*$BNSZ`(r3) #r[6]=c1 - $ST r10,`7*$BNSZ`(r3) #r[7]=c2 - blr - .long 0x00000000 - -# -# NOTE: The following label name should be changed to -# "bn_sqr_comba8" i.e. remove the first dot -# for the gcc compiler. This should be automatically -# done in the build -# - -.align 4 -.bn_sqr_comba8: -# -# This is an optimized version of the bn_sqr_comba8 routine. -# Tightly uses the adde instruction -# -# -# void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a) -# r3 contains r -# r4 contains a -# -# Freely use registers r5,r6,r7,r8,r9,r10,r11 as follows: -# -# r5,r6 are the two BN_ULONGs being multiplied. -# r7,r8 are the results of the 32x32 giving 64 bit multiply. -# r9,r10, r11 are the equivalents of c1,c2, c3. -# -# Possible optimization of loading all 8 longs of a into registers -# doesnt provide any speedup -# - - xor r0,r0,r0 #set r0 = 0.Used in addze - #instructions below. - - #sqr_add_c(a,0,c1,c2,c3); - $LD r5,`0*$BNSZ`(r4) - $UMULL r9,r5,r5 #1st iteration: no carries. - $UMULH r10,r5,r5 - $ST r9,`0*$BNSZ`(r3) # r[0]=c1; - #sqr_add_c2(a,1,0,c2,c3,c1); - $LD r6,`1*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r10,r7,r10 #add the two register number - adde r11,r8,r0 # (r8,r7) to the three register - addze r9,r0 # number (r9,r11,r10).NOTE:r0=0 - - addc r10,r7,r10 #add the two register number - adde r11,r8,r11 # (r8,r7) to the three register - addze r9,r9 # number (r9,r11,r10). - - $ST r10,`1*$BNSZ`(r3) # r[1]=c2 - - #sqr_add_c(a,1,c3,c1,c2); - $UMULL r7,r6,r6 - $UMULH r8,r6,r6 - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r0 - #sqr_add_c2(a,2,0,c3,c1,c2); - $LD r6,`2*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - - $ST r11,`2*$BNSZ`(r3) #r[2]=c3 - #sqr_add_c2(a,3,0,c1,c2,c3); - $LD r6,`3*$BNSZ`(r4) #r6 = a[3]. r5 is already a[0]. - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r0 - - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - #sqr_add_c2(a,2,1,c1,c2,c3); - $LD r5,`1*$BNSZ`(r4) - $LD r6,`2*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - - $ST r9,`3*$BNSZ`(r3) #r[3]=c1; - #sqr_add_c(a,2,c2,c3,c1); - $UMULL r7,r6,r6 - $UMULH r8,r6,r6 - - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r0 - #sqr_add_c2(a,3,1,c2,c3,c1); - $LD r6,`3*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - #sqr_add_c2(a,4,0,c2,c3,c1); - $LD r5,`0*$BNSZ`(r4) - $LD r6,`4*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - $ST r10,`4*$BNSZ`(r3) #r[4]=c2; - #sqr_add_c2(a,5,0,c3,c1,c2); - $LD r6,`5*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r0 - - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - #sqr_add_c2(a,4,1,c3,c1,c2); - $LD r5,`1*$BNSZ`(r4) - $LD r6,`4*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - #sqr_add_c2(a,3,2,c3,c1,c2); - $LD r5,`2*$BNSZ`(r4) - $LD r6,`3*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - $ST r11,`5*$BNSZ`(r3) #r[5]=c3; - #sqr_add_c(a,3,c1,c2,c3); - $UMULL r7,r6,r6 - $UMULH r8,r6,r6 - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r0 - #sqr_add_c2(a,4,2,c1,c2,c3); - $LD r6,`4*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - #sqr_add_c2(a,5,1,c1,c2,c3); - $LD r5,`1*$BNSZ`(r4) - $LD r6,`5*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - #sqr_add_c2(a,6,0,c1,c2,c3); - $LD r5,`0*$BNSZ`(r4) - $LD r6,`6*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - $ST r9,`6*$BNSZ`(r3) #r[6]=c1; - #sqr_add_c2(a,7,0,c2,c3,c1); - $LD r6,`7*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r0 - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - #sqr_add_c2(a,6,1,c2,c3,c1); - $LD r5,`1*$BNSZ`(r4) - $LD r6,`6*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - #sqr_add_c2(a,5,2,c2,c3,c1); - $LD r5,`2*$BNSZ`(r4) - $LD r6,`5*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - #sqr_add_c2(a,4,3,c2,c3,c1); - $LD r5,`3*$BNSZ`(r4) - $LD r6,`4*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - $ST r10,`7*$BNSZ`(r3) #r[7]=c2; - #sqr_add_c(a,4,c3,c1,c2); - $UMULL r7,r6,r6 - $UMULH r8,r6,r6 - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r0 - #sqr_add_c2(a,5,3,c3,c1,c2); - $LD r6,`5*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - #sqr_add_c2(a,6,2,c3,c1,c2); - $LD r5,`2*$BNSZ`(r4) - $LD r6,`6*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - #sqr_add_c2(a,7,1,c3,c1,c2); - $LD r5,`1*$BNSZ`(r4) - $LD r6,`7*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - $ST r11,`8*$BNSZ`(r3) #r[8]=c3; - #sqr_add_c2(a,7,2,c1,c2,c3); - $LD r5,`2*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r0 - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - #sqr_add_c2(a,6,3,c1,c2,c3); - $LD r5,`3*$BNSZ`(r4) - $LD r6,`6*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - #sqr_add_c2(a,5,4,c1,c2,c3); - $LD r5,`4*$BNSZ`(r4) - $LD r6,`5*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - $ST r9,`9*$BNSZ`(r3) #r[9]=c1; - #sqr_add_c(a,5,c2,c3,c1); - $UMULL r7,r6,r6 - $UMULH r8,r6,r6 - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r0 - #sqr_add_c2(a,6,4,c2,c3,c1); - $LD r6,`6*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - #sqr_add_c2(a,7,3,c2,c3,c1); - $LD r5,`3*$BNSZ`(r4) - $LD r6,`7*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - $ST r10,`10*$BNSZ`(r3) #r[10]=c2; - #sqr_add_c2(a,7,4,c3,c1,c2); - $LD r5,`4*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r0 - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - #sqr_add_c2(a,6,5,c3,c1,c2); - $LD r5,`5*$BNSZ`(r4) - $LD r6,`6*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - addc r11,r7,r11 - adde r9,r8,r9 - addze r10,r10 - $ST r11,`11*$BNSZ`(r3) #r[11]=c3; - #sqr_add_c(a,6,c1,c2,c3); - $UMULL r7,r6,r6 - $UMULH r8,r6,r6 - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r0 - #sqr_add_c2(a,7,5,c1,c2,c3) - $LD r6,`7*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - addc r9,r7,r9 - adde r10,r8,r10 - addze r11,r11 - $ST r9,`12*$BNSZ`(r3) #r[12]=c1; - - #sqr_add_c2(a,7,6,c2,c3,c1) - $LD r5,`6*$BNSZ`(r4) - $UMULL r7,r5,r6 - $UMULH r8,r5,r6 - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r0 - addc r10,r7,r10 - adde r11,r8,r11 - addze r9,r9 - $ST r10,`13*$BNSZ`(r3) #r[13]=c2; - #sqr_add_c(a,7,c3,c1,c2); - $UMULL r7,r6,r6 - $UMULH r8,r6,r6 - addc r11,r7,r11 - adde r9,r8,r9 - $ST r11,`14*$BNSZ`(r3) #r[14]=c3; - $ST r9, `15*$BNSZ`(r3) #r[15]=c1; - - - blr - - .long 0x00000000 - -# -# NOTE: The following label name should be changed to -# "bn_mul_comba4" i.e. remove the first dot -# for the gcc compiler. This should be automatically -# done in the build -# - -.align 4 -.bn_mul_comba4: -# -# This is an optimized version of the bn_mul_comba4 routine. -# -# void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) -# r3 contains r -# r4 contains a -# r5 contains b -# r6, r7 are the 2 BN_ULONGs being multiplied. -# r8, r9 are the results of the 32x32 giving 64 multiply. -# r10, r11, r12 are the equivalents of c1, c2, and c3. -# - xor r0,r0,r0 #r0=0. Used in addze below. - #mul_add_c(a[0],b[0],c1,c2,c3); - $LD r6,`0*$BNSZ`(r4) - $LD r7,`0*$BNSZ`(r5) - $UMULL r10,r6,r7 - $UMULH r11,r6,r7 - $ST r10,`0*$BNSZ`(r3) #r[0]=c1 - #mul_add_c(a[0],b[1],c2,c3,c1); - $LD r7,`1*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r8,r11 - adde r12,r9,r0 - addze r10,r0 - #mul_add_c(a[1],b[0],c2,c3,c1); - $LD r6, `1*$BNSZ`(r4) - $LD r7, `0*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r8,r11 - adde r12,r9,r12 - addze r10,r10 - $ST r11,`1*$BNSZ`(r3) #r[1]=c2 - #mul_add_c(a[2],b[0],c3,c1,c2); - $LD r6,`2*$BNSZ`(r4) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r8,r12 - adde r10,r9,r10 - addze r11,r0 - #mul_add_c(a[1],b[1],c3,c1,c2); - $LD r6,`1*$BNSZ`(r4) - $LD r7,`1*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r8,r12 - adde r10,r9,r10 - addze r11,r11 - #mul_add_c(a[0],b[2],c3,c1,c2); - $LD r6,`0*$BNSZ`(r4) - $LD r7,`2*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r8,r12 - adde r10,r9,r10 - addze r11,r11 - $ST r12,`2*$BNSZ`(r3) #r[2]=c3 - #mul_add_c(a[0],b[3],c1,c2,c3); - $LD r7,`3*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r8,r10 - adde r11,r9,r11 - addze r12,r0 - #mul_add_c(a[1],b[2],c1,c2,c3); - $LD r6,`1*$BNSZ`(r4) - $LD r7,`2*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r8,r10 - adde r11,r9,r11 - addze r12,r12 - #mul_add_c(a[2],b[1],c1,c2,c3); - $LD r6,`2*$BNSZ`(r4) - $LD r7,`1*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r8,r10 - adde r11,r9,r11 - addze r12,r12 - #mul_add_c(a[3],b[0],c1,c2,c3); - $LD r6,`3*$BNSZ`(r4) - $LD r7,`0*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r8,r10 - adde r11,r9,r11 - addze r12,r12 - $ST r10,`3*$BNSZ`(r3) #r[3]=c1 - #mul_add_c(a[3],b[1],c2,c3,c1); - $LD r7,`1*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r8,r11 - adde r12,r9,r12 - addze r10,r0 - #mul_add_c(a[2],b[2],c2,c3,c1); - $LD r6,`2*$BNSZ`(r4) - $LD r7,`2*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r8,r11 - adde r12,r9,r12 - addze r10,r10 - #mul_add_c(a[1],b[3],c2,c3,c1); - $LD r6,`1*$BNSZ`(r4) - $LD r7,`3*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r8,r11 - adde r12,r9,r12 - addze r10,r10 - $ST r11,`4*$BNSZ`(r3) #r[4]=c2 - #mul_add_c(a[2],b[3],c3,c1,c2); - $LD r6,`2*$BNSZ`(r4) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r8,r12 - adde r10,r9,r10 - addze r11,r0 - #mul_add_c(a[3],b[2],c3,c1,c2); - $LD r6,`3*$BNSZ`(r4) - $LD r7,`2*$BNSZ`(r4) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r8,r12 - adde r10,r9,r10 - addze r11,r11 - $ST r12,`5*$BNSZ`(r3) #r[5]=c3 - #mul_add_c(a[3],b[3],c1,c2,c3); - $LD r7,`3*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r8,r10 - adde r11,r9,r11 - - $ST r10,`6*$BNSZ`(r3) #r[6]=c1 - $ST r11,`7*$BNSZ`(r3) #r[7]=c2 - blr - .long 0x00000000 - -# -# NOTE: The following label name should be changed to -# "bn_mul_comba8" i.e. remove the first dot -# for the gcc compiler. This should be automatically -# done in the build -# - -.align 4 -.bn_mul_comba8: -# -# Optimized version of the bn_mul_comba8 routine. -# -# void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) -# r3 contains r -# r4 contains a -# r5 contains b -# r6, r7 are the 2 BN_ULONGs being multiplied. -# r8, r9 are the results of the 32x32 giving 64 multiply. -# r10, r11, r12 are the equivalents of c1, c2, and c3. -# - xor r0,r0,r0 #r0=0. Used in addze below. - - #mul_add_c(a[0],b[0],c1,c2,c3); - $LD r6,`0*$BNSZ`(r4) #a[0] - $LD r7,`0*$BNSZ`(r5) #b[0] - $UMULL r10,r6,r7 - $UMULH r11,r6,r7 - $ST r10,`0*$BNSZ`(r3) #r[0]=c1; - #mul_add_c(a[0],b[1],c2,c3,c1); - $LD r7,`1*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - addze r12,r9 # since we didnt set r12 to zero before. - addze r10,r0 - #mul_add_c(a[1],b[0],c2,c3,c1); - $LD r6,`1*$BNSZ`(r4) - $LD r7,`0*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - $ST r11,`1*$BNSZ`(r3) #r[1]=c2; - #mul_add_c(a[2],b[0],c3,c1,c2); - $LD r6,`2*$BNSZ`(r4) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r0 - #mul_add_c(a[1],b[1],c3,c1,c2); - $LD r6,`1*$BNSZ`(r4) - $LD r7,`1*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - #mul_add_c(a[0],b[2],c3,c1,c2); - $LD r6,`0*$BNSZ`(r4) - $LD r7,`2*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - $ST r12,`2*$BNSZ`(r3) #r[2]=c3; - #mul_add_c(a[0],b[3],c1,c2,c3); - $LD r7,`3*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r0 - #mul_add_c(a[1],b[2],c1,c2,c3); - $LD r6,`1*$BNSZ`(r4) - $LD r7,`2*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - - #mul_add_c(a[2],b[1],c1,c2,c3); - $LD r6,`2*$BNSZ`(r4) - $LD r7,`1*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - #mul_add_c(a[3],b[0],c1,c2,c3); - $LD r6,`3*$BNSZ`(r4) - $LD r7,`0*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - $ST r10,`3*$BNSZ`(r3) #r[3]=c1; - #mul_add_c(a[4],b[0],c2,c3,c1); - $LD r6,`4*$BNSZ`(r4) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r0 - #mul_add_c(a[3],b[1],c2,c3,c1); - $LD r6,`3*$BNSZ`(r4) - $LD r7,`1*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - #mul_add_c(a[2],b[2],c2,c3,c1); - $LD r6,`2*$BNSZ`(r4) - $LD r7,`2*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - #mul_add_c(a[1],b[3],c2,c3,c1); - $LD r6,`1*$BNSZ`(r4) - $LD r7,`3*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - #mul_add_c(a[0],b[4],c2,c3,c1); - $LD r6,`0*$BNSZ`(r4) - $LD r7,`4*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - $ST r11,`4*$BNSZ`(r3) #r[4]=c2; - #mul_add_c(a[0],b[5],c3,c1,c2); - $LD r7,`5*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r0 - #mul_add_c(a[1],b[4],c3,c1,c2); - $LD r6,`1*$BNSZ`(r4) - $LD r7,`4*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - #mul_add_c(a[2],b[3],c3,c1,c2); - $LD r6,`2*$BNSZ`(r4) - $LD r7,`3*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - #mul_add_c(a[3],b[2],c3,c1,c2); - $LD r6,`3*$BNSZ`(r4) - $LD r7,`2*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - #mul_add_c(a[4],b[1],c3,c1,c2); - $LD r6,`4*$BNSZ`(r4) - $LD r7,`1*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - #mul_add_c(a[5],b[0],c3,c1,c2); - $LD r6,`5*$BNSZ`(r4) - $LD r7,`0*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - $ST r12,`5*$BNSZ`(r3) #r[5]=c3; - #mul_add_c(a[6],b[0],c1,c2,c3); - $LD r6,`6*$BNSZ`(r4) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r0 - #mul_add_c(a[5],b[1],c1,c2,c3); - $LD r6,`5*$BNSZ`(r4) - $LD r7,`1*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - #mul_add_c(a[4],b[2],c1,c2,c3); - $LD r6,`4*$BNSZ`(r4) - $LD r7,`2*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - #mul_add_c(a[3],b[3],c1,c2,c3); - $LD r6,`3*$BNSZ`(r4) - $LD r7,`3*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - #mul_add_c(a[2],b[4],c1,c2,c3); - $LD r6,`2*$BNSZ`(r4) - $LD r7,`4*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - #mul_add_c(a[1],b[5],c1,c2,c3); - $LD r6,`1*$BNSZ`(r4) - $LD r7,`5*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - #mul_add_c(a[0],b[6],c1,c2,c3); - $LD r6,`0*$BNSZ`(r4) - $LD r7,`6*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - $ST r10,`6*$BNSZ`(r3) #r[6]=c1; - #mul_add_c(a[0],b[7],c2,c3,c1); - $LD r7,`7*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r0 - #mul_add_c(a[1],b[6],c2,c3,c1); - $LD r6,`1*$BNSZ`(r4) - $LD r7,`6*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - #mul_add_c(a[2],b[5],c2,c3,c1); - $LD r6,`2*$BNSZ`(r4) - $LD r7,`5*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - #mul_add_c(a[3],b[4],c2,c3,c1); - $LD r6,`3*$BNSZ`(r4) - $LD r7,`4*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - #mul_add_c(a[4],b[3],c2,c3,c1); - $LD r6,`4*$BNSZ`(r4) - $LD r7,`3*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - #mul_add_c(a[5],b[2],c2,c3,c1); - $LD r6,`5*$BNSZ`(r4) - $LD r7,`2*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - #mul_add_c(a[6],b[1],c2,c3,c1); - $LD r6,`6*$BNSZ`(r4) - $LD r7,`1*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - #mul_add_c(a[7],b[0],c2,c3,c1); - $LD r6,`7*$BNSZ`(r4) - $LD r7,`0*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - $ST r11,`7*$BNSZ`(r3) #r[7]=c2; - #mul_add_c(a[7],b[1],c3,c1,c2); - $LD r7,`1*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r0 - #mul_add_c(a[6],b[2],c3,c1,c2); - $LD r6,`6*$BNSZ`(r4) - $LD r7,`2*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - #mul_add_c(a[5],b[3],c3,c1,c2); - $LD r6,`5*$BNSZ`(r4) - $LD r7,`3*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - #mul_add_c(a[4],b[4],c3,c1,c2); - $LD r6,`4*$BNSZ`(r4) - $LD r7,`4*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - #mul_add_c(a[3],b[5],c3,c1,c2); - $LD r6,`3*$BNSZ`(r4) - $LD r7,`5*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - #mul_add_c(a[2],b[6],c3,c1,c2); - $LD r6,`2*$BNSZ`(r4) - $LD r7,`6*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - #mul_add_c(a[1],b[7],c3,c1,c2); - $LD r6,`1*$BNSZ`(r4) - $LD r7,`7*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - $ST r12,`8*$BNSZ`(r3) #r[8]=c3; - #mul_add_c(a[2],b[7],c1,c2,c3); - $LD r6,`2*$BNSZ`(r4) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r0 - #mul_add_c(a[3],b[6],c1,c2,c3); - $LD r6,`3*$BNSZ`(r4) - $LD r7,`6*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - #mul_add_c(a[4],b[5],c1,c2,c3); - $LD r6,`4*$BNSZ`(r4) - $LD r7,`5*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - #mul_add_c(a[5],b[4],c1,c2,c3); - $LD r6,`5*$BNSZ`(r4) - $LD r7,`4*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - #mul_add_c(a[6],b[3],c1,c2,c3); - $LD r6,`6*$BNSZ`(r4) - $LD r7,`3*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - #mul_add_c(a[7],b[2],c1,c2,c3); - $LD r6,`7*$BNSZ`(r4) - $LD r7,`2*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - $ST r10,`9*$BNSZ`(r3) #r[9]=c1; - #mul_add_c(a[7],b[3],c2,c3,c1); - $LD r7,`3*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r0 - #mul_add_c(a[6],b[4],c2,c3,c1); - $LD r6,`6*$BNSZ`(r4) - $LD r7,`4*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - #mul_add_c(a[5],b[5],c2,c3,c1); - $LD r6,`5*$BNSZ`(r4) - $LD r7,`5*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - #mul_add_c(a[4],b[6],c2,c3,c1); - $LD r6,`4*$BNSZ`(r4) - $LD r7,`6*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - #mul_add_c(a[3],b[7],c2,c3,c1); - $LD r6,`3*$BNSZ`(r4) - $LD r7,`7*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - $ST r11,`10*$BNSZ`(r3) #r[10]=c2; - #mul_add_c(a[4],b[7],c3,c1,c2); - $LD r6,`4*$BNSZ`(r4) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r0 - #mul_add_c(a[5],b[6],c3,c1,c2); - $LD r6,`5*$BNSZ`(r4) - $LD r7,`6*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - #mul_add_c(a[6],b[5],c3,c1,c2); - $LD r6,`6*$BNSZ`(r4) - $LD r7,`5*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - #mul_add_c(a[7],b[4],c3,c1,c2); - $LD r6,`7*$BNSZ`(r4) - $LD r7,`4*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - addze r11,r11 - $ST r12,`11*$BNSZ`(r3) #r[11]=c3; - #mul_add_c(a[7],b[5],c1,c2,c3); - $LD r7,`5*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r0 - #mul_add_c(a[6],b[6],c1,c2,c3); - $LD r6,`6*$BNSZ`(r4) - $LD r7,`6*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - #mul_add_c(a[5],b[7],c1,c2,c3); - $LD r6,`5*$BNSZ`(r4) - $LD r7,`7*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r10,r10,r8 - adde r11,r11,r9 - addze r12,r12 - $ST r10,`12*$BNSZ`(r3) #r[12]=c1; - #mul_add_c(a[6],b[7],c2,c3,c1); - $LD r6,`6*$BNSZ`(r4) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r0 - #mul_add_c(a[7],b[6],c2,c3,c1); - $LD r6,`7*$BNSZ`(r4) - $LD r7,`6*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r11,r11,r8 - adde r12,r12,r9 - addze r10,r10 - $ST r11,`13*$BNSZ`(r3) #r[13]=c2; - #mul_add_c(a[7],b[7],c3,c1,c2); - $LD r7,`7*$BNSZ`(r5) - $UMULL r8,r6,r7 - $UMULH r9,r6,r7 - addc r12,r12,r8 - adde r10,r10,r9 - $ST r12,`14*$BNSZ`(r3) #r[14]=c3; - $ST r10,`15*$BNSZ`(r3) #r[15]=c1; - blr - .long 0x00000000 - -# -# NOTE: The following label name should be changed to -# "bn_sub_words" i.e. remove the first dot -# for the gcc compiler. This should be automatically -# done in the build -# -# -.align 4 -.bn_sub_words: -# -# Handcoded version of bn_sub_words -# -#BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n) -# -# r3 = r -# r4 = a -# r5 = b -# r6 = n -# -# Note: No loop unrolling done since this is not a performance -# critical loop. - - xor r0,r0,r0 #set r0 = 0 -# -# check for r6 = 0 AND set carry bit. -# - subfc. r7,r0,r6 # If r6 is 0 then result is 0. - # if r6 > 0 then result !=0 - # In either case carry bit is set. - beq Lppcasm_sub_adios - addi r4,r4,-$BNSZ - addi r3,r3,-$BNSZ - addi r5,r5,-$BNSZ - mtctr r6 -Lppcasm_sub_mainloop: - $LDU r7,$BNSZ(r4) - $LDU r8,$BNSZ(r5) - subfe r6,r8,r7 # r6 = r7+carry bit + onescomplement(r8) - # if carry = 1 this is r7-r8. Else it - # is r7-r8 -1 as we need. - $STU r6,$BNSZ(r3) - bdnz- Lppcasm_sub_mainloop -Lppcasm_sub_adios: - subfze r3,r0 # if carry bit is set then r3 = 0 else -1 - andi. r3,r3,1 # keep only last bit. - blr - .long 0x00000000 - - -# -# NOTE: The following label name should be changed to -# "bn_add_words" i.e. remove the first dot -# for the gcc compiler. This should be automatically -# done in the build -# - -.align 4 -.bn_add_words: -# -# Handcoded version of bn_add_words -# -#BN_ULONG bn_add_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n) -# -# r3 = r -# r4 = a -# r5 = b -# r6 = n -# -# Note: No loop unrolling done since this is not a performance -# critical loop. - - xor r0,r0,r0 -# -# check for r6 = 0. Is this needed? -# - addic. r6,r6,0 #test r6 and clear carry bit. - beq Lppcasm_add_adios - addi r4,r4,-$BNSZ - addi r3,r3,-$BNSZ - addi r5,r5,-$BNSZ - mtctr r6 -Lppcasm_add_mainloop: - $LDU r7,$BNSZ(r4) - $LDU r8,$BNSZ(r5) - adde r8,r7,r8 - $STU r8,$BNSZ(r3) - bdnz- Lppcasm_add_mainloop -Lppcasm_add_adios: - addze r3,r0 #return carry bit. - blr - .long 0x00000000 - -# -# NOTE: The following label name should be changed to -# "bn_div_words" i.e. remove the first dot -# for the gcc compiler. This should be automatically -# done in the build -# - -.align 4 -.bn_div_words: -# -# This is a cleaned up version of code generated by -# the AIX compiler. The only optimization is to use -# the PPC instruction to count leading zeros instead -# of call to num_bits_word. Since this was compiled -# only at level -O2 we can possibly squeeze it more? -# -# r3 = h -# r4 = l -# r5 = d - - $UCMPI 0,r5,0 # compare r5 and 0 - bne Lppcasm_div1 # proceed if d!=0 - li r3,-1 # d=0 return -1 - blr -Lppcasm_div1: - xor r0,r0,r0 #r0=0 - li r8,$BITS - $CNTLZ. r7,r5 #r7 = num leading 0s in d. - beq Lppcasm_div2 #proceed if no leading zeros - subf r8,r7,r8 #r8 = BN_num_bits_word(d) - $SHR. r9,r3,r8 #are there any bits above r8'th? - $TR 16,r9,r0 #if there're, signal to dump core... -Lppcasm_div2: - $UCMP 0,r3,r5 #h>=d? - blt Lppcasm_div3 #goto Lppcasm_div3 if not - subf r3,r5,r3 #h-=d ; -Lppcasm_div3: #r7 = BN_BITS2-i. so r7=i - cmpi 0,0,r7,0 # is (i == 0)? - beq Lppcasm_div4 - $SHL r3,r3,r7 # h = (h<< i) - $SHR r8,r4,r8 # r8 = (l >> BN_BITS2 -i) - $SHL r5,r5,r7 # d<<=i - or r3,r3,r8 # h = (h<<i)|(l>>(BN_BITS2-i)) - $SHL r4,r4,r7 # l <<=i -Lppcasm_div4: - $SHRI r9,r5,`$BITS/2` # r9 = dh - # dl will be computed when needed - # as it saves registers. - li r6,2 #r6=2 - mtctr r6 #counter will be in count. -Lppcasm_divouterloop: - $SHRI r8,r3,`$BITS/2` #r8 = (h>>BN_BITS4) - $SHRI r11,r4,`$BITS/2` #r11= (l&BN_MASK2h)>>BN_BITS4 - # compute here for innerloop. - $UCMP 0,r8,r9 # is (h>>BN_BITS4)==dh - bne Lppcasm_div5 # goto Lppcasm_div5 if not - - li r8,-1 - $CLRU r8,r8,`$BITS/2` #q = BN_MASK2l - b Lppcasm_div6 -Lppcasm_div5: - $UDIV r8,r3,r9 #q = h/dh -Lppcasm_div6: - $UMULL r12,r9,r8 #th = q*dh - $CLRU r10,r5,`$BITS/2` #r10=dl - $UMULL r6,r8,r10 #tl = q*dl - -Lppcasm_divinnerloop: - subf r10,r12,r3 #t = h -th - $SHRI r7,r10,`$BITS/2` #r7= (t &BN_MASK2H), sort of... - addic. r7,r7,0 #test if r7 == 0. used below. - # now want to compute - # r7 = (t<<BN_BITS4)|((l&BN_MASK2h)>>BN_BITS4) - # the following 2 instructions do that - $SHLI r7,r10,`$BITS/2` # r7 = (t<<BN_BITS4) - or r7,r7,r11 # r7|=((l&BN_MASK2h)>>BN_BITS4) - $UCMP cr1,r6,r7 # compare (tl <= r7) - bne Lppcasm_divinnerexit - ble cr1,Lppcasm_divinnerexit - addi r8,r8,-1 #q-- - subf r12,r9,r12 #th -=dh - $CLRU r10,r5,`$BITS/2` #r10=dl. t is no longer needed in loop. - subf r6,r10,r6 #tl -=dl - b Lppcasm_divinnerloop -Lppcasm_divinnerexit: - $SHRI r10,r6,`$BITS/2` #t=(tl>>BN_BITS4) - $SHLI r11,r6,`$BITS/2` #tl=(tl<<BN_BITS4)&BN_MASK2h; - $UCMP cr1,r4,r11 # compare l and tl - add r12,r12,r10 # th+=t - bge cr1,Lppcasm_div7 # if (l>=tl) goto Lppcasm_div7 - addi r12,r12,1 # th++ -Lppcasm_div7: - subf r11,r11,r4 #r11=l-tl - $UCMP cr1,r3,r12 #compare h and th - bge cr1,Lppcasm_div8 #if (h>=th) goto Lppcasm_div8 - addi r8,r8,-1 # q-- - add r3,r5,r3 # h+=d -Lppcasm_div8: - subf r12,r12,r3 #r12 = h-th - $SHLI r4,r11,`$BITS/2` #l=(l&BN_MASK2l)<<BN_BITS4 - # want to compute - # h = ((h<<BN_BITS4)|(l>>BN_BITS4))&BN_MASK2 - # the following 2 instructions will do this. - $INSR r11,r12,`$BITS/2`,`$BITS/2` # r11 is the value we want rotated $BITS/2. - $ROTL r3,r11,`$BITS/2` # rotate by $BITS/2 and store in r3 - bdz Lppcasm_div9 #if (count==0) break ; - $SHLI r0,r8,`$BITS/2` #ret =q<<BN_BITS4 - b Lppcasm_divouterloop -Lppcasm_div9: - or r3,r8,r0 - blr - .long 0x00000000 - -# -# NOTE: The following label name should be changed to -# "bn_sqr_words" i.e. remove the first dot -# for the gcc compiler. This should be automatically -# done in the build -# -.align 4 -.bn_sqr_words: -# -# Optimized version of bn_sqr_words -# -# void bn_sqr_words(BN_ULONG *r, BN_ULONG *a, int n) -# -# r3 = r -# r4 = a -# r5 = n -# -# r6 = a[i]. -# r7,r8 = product. -# -# No unrolling done here. Not performance critical. - - addic. r5,r5,0 #test r5. - beq Lppcasm_sqr_adios - addi r4,r4,-$BNSZ - addi r3,r3,-$BNSZ - mtctr r5 -Lppcasm_sqr_mainloop: - #sqr(r[0],r[1],a[0]); - $LDU r6,$BNSZ(r4) - $UMULL r7,r6,r6 - $UMULH r8,r6,r6 - $STU r7,$BNSZ(r3) - $STU r8,$BNSZ(r3) - bdnz- Lppcasm_sqr_mainloop -Lppcasm_sqr_adios: - blr - .long 0x00000000 - - -# -# NOTE: The following label name should be changed to -# "bn_mul_words" i.e. remove the first dot -# for the gcc compiler. This should be automatically -# done in the build -# - -.align 4 -.bn_mul_words: -# -# BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w) -# -# r3 = rp -# r4 = ap -# r5 = num -# r6 = w - xor r0,r0,r0 - xor r12,r12,r12 # used for carry - rlwinm. r7,r5,30,2,31 # num >> 2 - beq Lppcasm_mw_REM - mtctr r7 -Lppcasm_mw_LOOP: - #mul(rp[0],ap[0],w,c1); - $LD r8,`0*$BNSZ`(r4) - $UMULL r9,r6,r8 - $UMULH r10,r6,r8 - addc r9,r9,r12 - #addze r10,r10 #carry is NOT ignored. - #will be taken care of - #in second spin below - #using adde. - $ST r9,`0*$BNSZ`(r3) - #mul(rp[1],ap[1],w,c1); - $LD r8,`1*$BNSZ`(r4) - $UMULL r11,r6,r8 - $UMULH r12,r6,r8 - adde r11,r11,r10 - #addze r12,r12 - $ST r11,`1*$BNSZ`(r3) - #mul(rp[2],ap[2],w,c1); - $LD r8,`2*$BNSZ`(r4) - $UMULL r9,r6,r8 - $UMULH r10,r6,r8 - adde r9,r9,r12 - #addze r10,r10 - $ST r9,`2*$BNSZ`(r3) - #mul_add(rp[3],ap[3],w,c1); - $LD r8,`3*$BNSZ`(r4) - $UMULL r11,r6,r8 - $UMULH r12,r6,r8 - adde r11,r11,r10 - addze r12,r12 #this spin we collect carry into - #r12 - $ST r11,`3*$BNSZ`(r3) - - addi r3,r3,`4*$BNSZ` - addi r4,r4,`4*$BNSZ` - bdnz- Lppcasm_mw_LOOP - -Lppcasm_mw_REM: - andi. r5,r5,0x3 - beq Lppcasm_mw_OVER - #mul(rp[0],ap[0],w,c1); - $LD r8,`0*$BNSZ`(r4) - $UMULL r9,r6,r8 - $UMULH r10,r6,r8 - addc r9,r9,r12 - addze r10,r10 - $ST r9,`0*$BNSZ`(r3) - addi r12,r10,0 - - addi r5,r5,-1 - cmpli 0,0,r5,0 - beq Lppcasm_mw_OVER - - - #mul(rp[1],ap[1],w,c1); - $LD r8,`1*$BNSZ`(r4) - $UMULL r9,r6,r8 - $UMULH r10,r6,r8 - addc r9,r9,r12 - addze r10,r10 - $ST r9,`1*$BNSZ`(r3) - addi r12,r10,0 - - addi r5,r5,-1 - cmpli 0,0,r5,0 - beq Lppcasm_mw_OVER - - #mul_add(rp[2],ap[2],w,c1); - $LD r8,`2*$BNSZ`(r4) - $UMULL r9,r6,r8 - $UMULH r10,r6,r8 - addc r9,r9,r12 - addze r10,r10 - $ST r9,`2*$BNSZ`(r3) - addi r12,r10,0 - -Lppcasm_mw_OVER: - addi r3,r12,0 - blr - .long 0x00000000 - -# -# NOTE: The following label name should be changed to -# "bn_mul_add_words" i.e. remove the first dot -# for the gcc compiler. This should be automatically -# done in the build -# - -.align 4 -.bn_mul_add_words: -# -# BN_ULONG bn_mul_add_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w) -# -# r3 = rp -# r4 = ap -# r5 = num -# r6 = w -# -# empirical evidence suggests that unrolled version performs best!! -# - xor r0,r0,r0 #r0 = 0 - xor r12,r12,r12 #r12 = 0 . used for carry - rlwinm. r7,r5,30,2,31 # num >> 2 - beq Lppcasm_maw_leftover # if (num < 4) go LPPCASM_maw_leftover - mtctr r7 -Lppcasm_maw_mainloop: - #mul_add(rp[0],ap[0],w,c1); - $LD r8,`0*$BNSZ`(r4) - $LD r11,`0*$BNSZ`(r3) - $UMULL r9,r6,r8 - $UMULH r10,r6,r8 - addc r9,r9,r12 #r12 is carry. - addze r10,r10 - addc r9,r9,r11 - #addze r10,r10 - #the above instruction addze - #is NOT needed. Carry will NOT - #be ignored. It's not affected - #by multiply and will be collected - #in the next spin - $ST r9,`0*$BNSZ`(r3) - - #mul_add(rp[1],ap[1],w,c1); - $LD r8,`1*$BNSZ`(r4) - $LD r9,`1*$BNSZ`(r3) - $UMULL r11,r6,r8 - $UMULH r12,r6,r8 - adde r11,r11,r10 #r10 is carry. - addze r12,r12 - addc r11,r11,r9 - #addze r12,r12 - $ST r11,`1*$BNSZ`(r3) - - #mul_add(rp[2],ap[2],w,c1); - $LD r8,`2*$BNSZ`(r4) - $UMULL r9,r6,r8 - $LD r11,`2*$BNSZ`(r3) - $UMULH r10,r6,r8 - adde r9,r9,r12 - addze r10,r10 - addc r9,r9,r11 - #addze r10,r10 - $ST r9,`2*$BNSZ`(r3) - - #mul_add(rp[3],ap[3],w,c1); - $LD r8,`3*$BNSZ`(r4) - $UMULL r11,r6,r8 - $LD r9,`3*$BNSZ`(r3) - $UMULH r12,r6,r8 - adde r11,r11,r10 - addze r12,r12 - addc r11,r11,r9 - addze r12,r12 - $ST r11,`3*$BNSZ`(r3) - addi r3,r3,`4*$BNSZ` - addi r4,r4,`4*$BNSZ` - bdnz- Lppcasm_maw_mainloop - -Lppcasm_maw_leftover: - andi. r5,r5,0x3 - beq Lppcasm_maw_adios - addi r3,r3,-$BNSZ - addi r4,r4,-$BNSZ - #mul_add(rp[0],ap[0],w,c1); - mtctr r5 - $LDU r8,$BNSZ(r4) - $UMULL r9,r6,r8 - $UMULH r10,r6,r8 - $LDU r11,$BNSZ(r3) - addc r9,r9,r11 - addze r10,r10 - addc r9,r9,r12 - addze r12,r10 - $ST r9,0(r3) - - bdz Lppcasm_maw_adios - #mul_add(rp[1],ap[1],w,c1); - $LDU r8,$BNSZ(r4) - $UMULL r9,r6,r8 - $UMULH r10,r6,r8 - $LDU r11,$BNSZ(r3) - addc r9,r9,r11 - addze r10,r10 - addc r9,r9,r12 - addze r12,r10 - $ST r9,0(r3) - - bdz Lppcasm_maw_adios - #mul_add(rp[2],ap[2],w,c1); - $LDU r8,$BNSZ(r4) - $UMULL r9,r6,r8 - $UMULH r10,r6,r8 - $LDU r11,$BNSZ(r3) - addc r9,r9,r11 - addze r10,r10 - addc r9,r9,r12 - addze r12,r10 - $ST r9,0(r3) - -Lppcasm_maw_adios: - addi r3,r12,0 - blr - .long 0x00000000 - .align 4 -EOF -$data =~ s/\`([^\`]*)\`/eval $1/gem; -print $data; -close STDOUT; diff --git a/app/openssl/crypto/bn/asm/ppc64-mont.pl b/app/openssl/crypto/bn/asm/ppc64-mont.pl deleted file mode 100644 index 3449b358..00000000 --- a/app/openssl/crypto/bn/asm/ppc64-mont.pl +++ /dev/null @@ -1,918 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# December 2007 - -# The reason for undertaken effort is basically following. Even though -# Power 6 CPU operates at incredible 4.7GHz clock frequency, its PKI -# performance was observed to be less than impressive, essentially as -# fast as 1.8GHz PPC970, or 2.6 times(!) slower than one would hope. -# Well, it's not surprising that IBM had to make some sacrifices to -# boost the clock frequency that much, but no overall improvement? -# Having observed how much difference did switching to FPU make on -# UltraSPARC, playing same stunt on Power 6 appeared appropriate... -# Unfortunately the resulting performance improvement is not as -# impressive, ~30%, and in absolute terms is still very far from what -# one would expect from 4.7GHz CPU. There is a chance that I'm doing -# something wrong, but in the lack of assembler level micro-profiling -# data or at least decent platform guide I can't tell... Or better -# results might be achieved with VMX... Anyway, this module provides -# *worse* performance on other PowerPC implementations, ~40-15% slower -# on PPC970 depending on key length and ~40% slower on Power 5 for all -# key lengths. As it's obviously inappropriate as "best all-round" -# alternative, it has to be complemented with run-time CPU family -# detection. Oh! It should also be noted that unlike other PowerPC -# implementation IALU ppc-mont.pl module performs *suboptimaly* on -# >=1024-bit key lengths on Power 6. It should also be noted that -# *everything* said so far applies to 64-bit builds! As far as 32-bit -# application executed on 64-bit CPU goes, this module is likely to -# become preferred choice, because it's easy to adapt it for such -# case and *is* faster than 32-bit ppc-mont.pl on *all* processors. - -# February 2008 - -# Micro-profiling assisted optimization results in ~15% improvement -# over original ppc64-mont.pl version, or overall ~50% improvement -# over ppc.pl module on Power 6. If compared to ppc-mont.pl on same -# Power 6 CPU, this module is 5-150% faster depending on key length, -# [hereafter] more for longer keys. But if compared to ppc-mont.pl -# on 1.8GHz PPC970, it's only 5-55% faster. Still far from impressive -# in absolute terms, but it's apparently the way Power 6 is... - -$flavour = shift; - -if ($flavour =~ /32/) { - $SIZE_T=4; - $RZONE= 224; - $FRAME= $SIZE_T*12+8*12; - $fname= "bn_mul_mont_ppc64"; - - $STUX= "stwux"; # store indexed and update - $PUSH= "stw"; - $POP= "lwz"; - die "not implemented yet"; -} elsif ($flavour =~ /64/) { - $SIZE_T=8; - $RZONE= 288; - $FRAME= $SIZE_T*12+8*12; - $fname= "bn_mul_mont"; - - # same as above, but 64-bit mnemonics... - $STUX= "stdux"; # store indexed and update - $PUSH= "std"; - $POP= "ld"; -} else { die "nonsense $flavour"; } - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or -( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or -die "can't locate ppc-xlate.pl"; - -open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!"; - -$FRAME=($FRAME+63)&~63; -$TRANSFER=16*8; - -$carry="r0"; -$sp="r1"; -$toc="r2"; -$rp="r3"; $ovf="r3"; -$ap="r4"; -$bp="r5"; -$np="r6"; -$n0="r7"; -$num="r8"; -$rp="r9"; # $rp is reassigned -$tp="r10"; -$j="r11"; -$i="r12"; -# non-volatile registers -$nap_d="r14"; # interleaved ap and np in double format -$a0="r15"; # ap[0] -$t0="r16"; # temporary registers -$t1="r17"; -$t2="r18"; -$t3="r19"; -$t4="r20"; -$t5="r21"; -$t6="r22"; -$t7="r23"; - -# PPC offers enough register bank capacity to unroll inner loops twice -# -# ..A3A2A1A0 -# dcba -# ----------- -# A0a -# A0b -# A0c -# A0d -# A1a -# A1b -# A1c -# A1d -# A2a -# A2b -# A2c -# A2d -# A3a -# A3b -# A3c -# A3d -# ..a -# ..b -# -$ba="f0"; $bb="f1"; $bc="f2"; $bd="f3"; -$na="f4"; $nb="f5"; $nc="f6"; $nd="f7"; -$dota="f8"; $dotb="f9"; -$A0="f10"; $A1="f11"; $A2="f12"; $A3="f13"; -$N0="f14"; $N1="f15"; $N2="f16"; $N3="f17"; -$T0a="f18"; $T0b="f19"; -$T1a="f20"; $T1b="f21"; -$T2a="f22"; $T2b="f23"; -$T3a="f24"; $T3b="f25"; - -# sp----------->+-------------------------------+ -# | saved sp | -# +-------------------------------+ -# | | -# +-------------------------------+ -# | 10 saved gpr, r14-r23 | -# . . -# . . -# +12*size_t +-------------------------------+ -# | 12 saved fpr, f14-f25 | -# . . -# . . -# +12*8 +-------------------------------+ -# | padding to 64 byte boundary | -# . . -# +X +-------------------------------+ -# | 16 gpr<->fpr transfer zone | -# . . -# . . -# +16*8 +-------------------------------+ -# | __int64 tmp[-1] | -# +-------------------------------+ -# | __int64 tmp[num] | -# . . -# . . -# . . -# +(num+1)*8 +-------------------------------+ -# | padding to 64 byte boundary | -# . . -# +X +-------------------------------+ -# | double nap_d[4*num] | -# . . -# . . -# . . -# +-------------------------------+ - -$code=<<___; -.machine "any" -.text - -.globl .$fname -.align 5 -.$fname: - cmpwi $num,4 - mr $rp,r3 ; $rp is reassigned - li r3,0 ; possible "not handled" return code - bltlr- - andi. r0,$num,1 ; $num has to be even - bnelr- - - slwi $num,$num,3 ; num*=8 - li $i,-4096 - slwi $tp,$num,2 ; place for {an}p_{lh}[num], i.e. 4*num - add $tp,$tp,$num ; place for tp[num+1] - addi $tp,$tp,`$FRAME+$TRANSFER+8+64+$RZONE` - subf $tp,$tp,$sp ; $sp-$tp - and $tp,$tp,$i ; minimize TLB usage - subf $tp,$sp,$tp ; $tp-$sp - $STUX $sp,$sp,$tp ; alloca - - $PUSH r14,`2*$SIZE_T`($sp) - $PUSH r15,`3*$SIZE_T`($sp) - $PUSH r16,`4*$SIZE_T`($sp) - $PUSH r17,`5*$SIZE_T`($sp) - $PUSH r18,`6*$SIZE_T`($sp) - $PUSH r19,`7*$SIZE_T`($sp) - $PUSH r20,`8*$SIZE_T`($sp) - $PUSH r21,`9*$SIZE_T`($sp) - $PUSH r22,`10*$SIZE_T`($sp) - $PUSH r23,`11*$SIZE_T`($sp) - stfd f14,`12*$SIZE_T+0`($sp) - stfd f15,`12*$SIZE_T+8`($sp) - stfd f16,`12*$SIZE_T+16`($sp) - stfd f17,`12*$SIZE_T+24`($sp) - stfd f18,`12*$SIZE_T+32`($sp) - stfd f19,`12*$SIZE_T+40`($sp) - stfd f20,`12*$SIZE_T+48`($sp) - stfd f21,`12*$SIZE_T+56`($sp) - stfd f22,`12*$SIZE_T+64`($sp) - stfd f23,`12*$SIZE_T+72`($sp) - stfd f24,`12*$SIZE_T+80`($sp) - stfd f25,`12*$SIZE_T+88`($sp) - - ld $a0,0($ap) ; pull ap[0] value - ld $n0,0($n0) ; pull n0[0] value - ld $t3,0($bp) ; bp[0] - - addi $tp,$sp,`$FRAME+$TRANSFER+8+64` - li $i,-64 - add $nap_d,$tp,$num - and $nap_d,$nap_d,$i ; align to 64 bytes - - mulld $t7,$a0,$t3 ; ap[0]*bp[0] - ; nap_d is off by 1, because it's used with stfdu/lfdu - addi $nap_d,$nap_d,-8 - srwi $j,$num,`3+1` ; counter register, num/2 - mulld $t7,$t7,$n0 ; tp[0]*n0 - addi $j,$j,-1 - addi $tp,$sp,`$FRAME+$TRANSFER-8` - li $carry,0 - mtctr $j - - ; transfer bp[0] to FPU as 4x16-bit values - extrdi $t0,$t3,16,48 - extrdi $t1,$t3,16,32 - extrdi $t2,$t3,16,16 - extrdi $t3,$t3,16,0 - std $t0,`$FRAME+0`($sp) - std $t1,`$FRAME+8`($sp) - std $t2,`$FRAME+16`($sp) - std $t3,`$FRAME+24`($sp) - ; transfer (ap[0]*bp[0])*n0 to FPU as 4x16-bit values - extrdi $t4,$t7,16,48 - extrdi $t5,$t7,16,32 - extrdi $t6,$t7,16,16 - extrdi $t7,$t7,16,0 - std $t4,`$FRAME+32`($sp) - std $t5,`$FRAME+40`($sp) - std $t6,`$FRAME+48`($sp) - std $t7,`$FRAME+56`($sp) - lwz $t0,4($ap) ; load a[j] as 32-bit word pair - lwz $t1,0($ap) - lwz $t2,12($ap) ; load a[j+1] as 32-bit word pair - lwz $t3,8($ap) - lwz $t4,4($np) ; load n[j] as 32-bit word pair - lwz $t5,0($np) - lwz $t6,12($np) ; load n[j+1] as 32-bit word pair - lwz $t7,8($np) - lfd $ba,`$FRAME+0`($sp) - lfd $bb,`$FRAME+8`($sp) - lfd $bc,`$FRAME+16`($sp) - lfd $bd,`$FRAME+24`($sp) - lfd $na,`$FRAME+32`($sp) - lfd $nb,`$FRAME+40`($sp) - lfd $nc,`$FRAME+48`($sp) - lfd $nd,`$FRAME+56`($sp) - std $t0,`$FRAME+64`($sp) - std $t1,`$FRAME+72`($sp) - std $t2,`$FRAME+80`($sp) - std $t3,`$FRAME+88`($sp) - std $t4,`$FRAME+96`($sp) - std $t5,`$FRAME+104`($sp) - std $t6,`$FRAME+112`($sp) - std $t7,`$FRAME+120`($sp) - fcfid $ba,$ba - fcfid $bb,$bb - fcfid $bc,$bc - fcfid $bd,$bd - fcfid $na,$na - fcfid $nb,$nb - fcfid $nc,$nc - fcfid $nd,$nd - - lfd $A0,`$FRAME+64`($sp) - lfd $A1,`$FRAME+72`($sp) - lfd $A2,`$FRAME+80`($sp) - lfd $A3,`$FRAME+88`($sp) - lfd $N0,`$FRAME+96`($sp) - lfd $N1,`$FRAME+104`($sp) - lfd $N2,`$FRAME+112`($sp) - lfd $N3,`$FRAME+120`($sp) - fcfid $A0,$A0 - fcfid $A1,$A1 - fcfid $A2,$A2 - fcfid $A3,$A3 - fcfid $N0,$N0 - fcfid $N1,$N1 - fcfid $N2,$N2 - fcfid $N3,$N3 - addi $ap,$ap,16 - addi $np,$np,16 - - fmul $T1a,$A1,$ba - fmul $T1b,$A1,$bb - stfd $A0,8($nap_d) ; save a[j] in double format - stfd $A1,16($nap_d) - fmul $T2a,$A2,$ba - fmul $T2b,$A2,$bb - stfd $A2,24($nap_d) ; save a[j+1] in double format - stfd $A3,32($nap_d) - fmul $T3a,$A3,$ba - fmul $T3b,$A3,$bb - stfd $N0,40($nap_d) ; save n[j] in double format - stfd $N1,48($nap_d) - fmul $T0a,$A0,$ba - fmul $T0b,$A0,$bb - stfd $N2,56($nap_d) ; save n[j+1] in double format - stfdu $N3,64($nap_d) - - fmadd $T1a,$A0,$bc,$T1a - fmadd $T1b,$A0,$bd,$T1b - fmadd $T2a,$A1,$bc,$T2a - fmadd $T2b,$A1,$bd,$T2b - fmadd $T3a,$A2,$bc,$T3a - fmadd $T3b,$A2,$bd,$T3b - fmul $dota,$A3,$bc - fmul $dotb,$A3,$bd - - fmadd $T1a,$N1,$na,$T1a - fmadd $T1b,$N1,$nb,$T1b - fmadd $T2a,$N2,$na,$T2a - fmadd $T2b,$N2,$nb,$T2b - fmadd $T3a,$N3,$na,$T3a - fmadd $T3b,$N3,$nb,$T3b - fmadd $T0a,$N0,$na,$T0a - fmadd $T0b,$N0,$nb,$T0b - - fmadd $T1a,$N0,$nc,$T1a - fmadd $T1b,$N0,$nd,$T1b - fmadd $T2a,$N1,$nc,$T2a - fmadd $T2b,$N1,$nd,$T2b - fmadd $T3a,$N2,$nc,$T3a - fmadd $T3b,$N2,$nd,$T3b - fmadd $dota,$N3,$nc,$dota - fmadd $dotb,$N3,$nd,$dotb - - fctid $T0a,$T0a - fctid $T0b,$T0b - fctid $T1a,$T1a - fctid $T1b,$T1b - fctid $T2a,$T2a - fctid $T2b,$T2b - fctid $T3a,$T3a - fctid $T3b,$T3b - - stfd $T0a,`$FRAME+0`($sp) - stfd $T0b,`$FRAME+8`($sp) - stfd $T1a,`$FRAME+16`($sp) - stfd $T1b,`$FRAME+24`($sp) - stfd $T2a,`$FRAME+32`($sp) - stfd $T2b,`$FRAME+40`($sp) - stfd $T3a,`$FRAME+48`($sp) - stfd $T3b,`$FRAME+56`($sp) - -.align 5 -L1st: - lwz $t0,4($ap) ; load a[j] as 32-bit word pair - lwz $t1,0($ap) - lwz $t2,12($ap) ; load a[j+1] as 32-bit word pair - lwz $t3,8($ap) - lwz $t4,4($np) ; load n[j] as 32-bit word pair - lwz $t5,0($np) - lwz $t6,12($np) ; load n[j+1] as 32-bit word pair - lwz $t7,8($np) - std $t0,`$FRAME+64`($sp) - std $t1,`$FRAME+72`($sp) - std $t2,`$FRAME+80`($sp) - std $t3,`$FRAME+88`($sp) - std $t4,`$FRAME+96`($sp) - std $t5,`$FRAME+104`($sp) - std $t6,`$FRAME+112`($sp) - std $t7,`$FRAME+120`($sp) - ld $t0,`$FRAME+0`($sp) - ld $t1,`$FRAME+8`($sp) - ld $t2,`$FRAME+16`($sp) - ld $t3,`$FRAME+24`($sp) - ld $t4,`$FRAME+32`($sp) - ld $t5,`$FRAME+40`($sp) - ld $t6,`$FRAME+48`($sp) - ld $t7,`$FRAME+56`($sp) - lfd $A0,`$FRAME+64`($sp) - lfd $A1,`$FRAME+72`($sp) - lfd $A2,`$FRAME+80`($sp) - lfd $A3,`$FRAME+88`($sp) - lfd $N0,`$FRAME+96`($sp) - lfd $N1,`$FRAME+104`($sp) - lfd $N2,`$FRAME+112`($sp) - lfd $N3,`$FRAME+120`($sp) - fcfid $A0,$A0 - fcfid $A1,$A1 - fcfid $A2,$A2 - fcfid $A3,$A3 - fcfid $N0,$N0 - fcfid $N1,$N1 - fcfid $N2,$N2 - fcfid $N3,$N3 - addi $ap,$ap,16 - addi $np,$np,16 - - fmul $T1a,$A1,$ba - fmul $T1b,$A1,$bb - fmul $T2a,$A2,$ba - fmul $T2b,$A2,$bb - stfd $A0,8($nap_d) ; save a[j] in double format - stfd $A1,16($nap_d) - fmul $T3a,$A3,$ba - fmul $T3b,$A3,$bb - fmadd $T0a,$A0,$ba,$dota - fmadd $T0b,$A0,$bb,$dotb - stfd $A2,24($nap_d) ; save a[j+1] in double format - stfd $A3,32($nap_d) - - fmadd $T1a,$A0,$bc,$T1a - fmadd $T1b,$A0,$bd,$T1b - fmadd $T2a,$A1,$bc,$T2a - fmadd $T2b,$A1,$bd,$T2b - stfd $N0,40($nap_d) ; save n[j] in double format - stfd $N1,48($nap_d) - fmadd $T3a,$A2,$bc,$T3a - fmadd $T3b,$A2,$bd,$T3b - add $t0,$t0,$carry ; can not overflow - fmul $dota,$A3,$bc - fmul $dotb,$A3,$bd - stfd $N2,56($nap_d) ; save n[j+1] in double format - stfdu $N3,64($nap_d) - srdi $carry,$t0,16 - add $t1,$t1,$carry - srdi $carry,$t1,16 - - fmadd $T1a,$N1,$na,$T1a - fmadd $T1b,$N1,$nb,$T1b - insrdi $t0,$t1,16,32 - fmadd $T2a,$N2,$na,$T2a - fmadd $T2b,$N2,$nb,$T2b - add $t2,$t2,$carry - fmadd $T3a,$N3,$na,$T3a - fmadd $T3b,$N3,$nb,$T3b - srdi $carry,$t2,16 - fmadd $T0a,$N0,$na,$T0a - fmadd $T0b,$N0,$nb,$T0b - insrdi $t0,$t2,16,16 - add $t3,$t3,$carry - srdi $carry,$t3,16 - - fmadd $T1a,$N0,$nc,$T1a - fmadd $T1b,$N0,$nd,$T1b - insrdi $t0,$t3,16,0 ; 0..63 bits - fmadd $T2a,$N1,$nc,$T2a - fmadd $T2b,$N1,$nd,$T2b - add $t4,$t4,$carry - fmadd $T3a,$N2,$nc,$T3a - fmadd $T3b,$N2,$nd,$T3b - srdi $carry,$t4,16 - fmadd $dota,$N3,$nc,$dota - fmadd $dotb,$N3,$nd,$dotb - add $t5,$t5,$carry - srdi $carry,$t5,16 - insrdi $t4,$t5,16,32 - - fctid $T0a,$T0a - fctid $T0b,$T0b - add $t6,$t6,$carry - fctid $T1a,$T1a - fctid $T1b,$T1b - srdi $carry,$t6,16 - fctid $T2a,$T2a - fctid $T2b,$T2b - insrdi $t4,$t6,16,16 - fctid $T3a,$T3a - fctid $T3b,$T3b - add $t7,$t7,$carry - insrdi $t4,$t7,16,0 ; 64..127 bits - srdi $carry,$t7,16 ; upper 33 bits - - stfd $T0a,`$FRAME+0`($sp) - stfd $T0b,`$FRAME+8`($sp) - stfd $T1a,`$FRAME+16`($sp) - stfd $T1b,`$FRAME+24`($sp) - stfd $T2a,`$FRAME+32`($sp) - stfd $T2b,`$FRAME+40`($sp) - stfd $T3a,`$FRAME+48`($sp) - stfd $T3b,`$FRAME+56`($sp) - std $t0,8($tp) ; tp[j-1] - stdu $t4,16($tp) ; tp[j] - bdnz- L1st - - fctid $dota,$dota - fctid $dotb,$dotb - - ld $t0,`$FRAME+0`($sp) - ld $t1,`$FRAME+8`($sp) - ld $t2,`$FRAME+16`($sp) - ld $t3,`$FRAME+24`($sp) - ld $t4,`$FRAME+32`($sp) - ld $t5,`$FRAME+40`($sp) - ld $t6,`$FRAME+48`($sp) - ld $t7,`$FRAME+56`($sp) - stfd $dota,`$FRAME+64`($sp) - stfd $dotb,`$FRAME+72`($sp) - - add $t0,$t0,$carry ; can not overflow - srdi $carry,$t0,16 - add $t1,$t1,$carry - srdi $carry,$t1,16 - insrdi $t0,$t1,16,32 - add $t2,$t2,$carry - srdi $carry,$t2,16 - insrdi $t0,$t2,16,16 - add $t3,$t3,$carry - srdi $carry,$t3,16 - insrdi $t0,$t3,16,0 ; 0..63 bits - add $t4,$t4,$carry - srdi $carry,$t4,16 - add $t5,$t5,$carry - srdi $carry,$t5,16 - insrdi $t4,$t5,16,32 - add $t6,$t6,$carry - srdi $carry,$t6,16 - insrdi $t4,$t6,16,16 - add $t7,$t7,$carry - insrdi $t4,$t7,16,0 ; 64..127 bits - srdi $carry,$t7,16 ; upper 33 bits - ld $t6,`$FRAME+64`($sp) - ld $t7,`$FRAME+72`($sp) - - std $t0,8($tp) ; tp[j-1] - stdu $t4,16($tp) ; tp[j] - - add $t6,$t6,$carry ; can not overflow - srdi $carry,$t6,16 - add $t7,$t7,$carry - insrdi $t6,$t7,48,0 - srdi $ovf,$t7,48 - std $t6,8($tp) ; tp[num-1] - - slwi $t7,$num,2 - subf $nap_d,$t7,$nap_d ; rewind pointer - - li $i,8 ; i=1 -.align 5 -Louter: - ldx $t3,$bp,$i ; bp[i] - ld $t6,`$FRAME+$TRANSFER+8`($sp) ; tp[0] - mulld $t7,$a0,$t3 ; ap[0]*bp[i] - - addi $tp,$sp,`$FRAME+$TRANSFER` - add $t7,$t7,$t6 ; ap[0]*bp[i]+tp[0] - li $carry,0 - mulld $t7,$t7,$n0 ; tp[0]*n0 - mtctr $j - - ; transfer bp[i] to FPU as 4x16-bit values - extrdi $t0,$t3,16,48 - extrdi $t1,$t3,16,32 - extrdi $t2,$t3,16,16 - extrdi $t3,$t3,16,0 - std $t0,`$FRAME+0`($sp) - std $t1,`$FRAME+8`($sp) - std $t2,`$FRAME+16`($sp) - std $t3,`$FRAME+24`($sp) - ; transfer (ap[0]*bp[i]+tp[0])*n0 to FPU as 4x16-bit values - extrdi $t4,$t7,16,48 - extrdi $t5,$t7,16,32 - extrdi $t6,$t7,16,16 - extrdi $t7,$t7,16,0 - std $t4,`$FRAME+32`($sp) - std $t5,`$FRAME+40`($sp) - std $t6,`$FRAME+48`($sp) - std $t7,`$FRAME+56`($sp) - - lfd $A0,8($nap_d) ; load a[j] in double format - lfd $A1,16($nap_d) - lfd $A2,24($nap_d) ; load a[j+1] in double format - lfd $A3,32($nap_d) - lfd $N0,40($nap_d) ; load n[j] in double format - lfd $N1,48($nap_d) - lfd $N2,56($nap_d) ; load n[j+1] in double format - lfdu $N3,64($nap_d) - - lfd $ba,`$FRAME+0`($sp) - lfd $bb,`$FRAME+8`($sp) - lfd $bc,`$FRAME+16`($sp) - lfd $bd,`$FRAME+24`($sp) - lfd $na,`$FRAME+32`($sp) - lfd $nb,`$FRAME+40`($sp) - lfd $nc,`$FRAME+48`($sp) - lfd $nd,`$FRAME+56`($sp) - - fcfid $ba,$ba - fcfid $bb,$bb - fcfid $bc,$bc - fcfid $bd,$bd - fcfid $na,$na - fcfid $nb,$nb - fcfid $nc,$nc - fcfid $nd,$nd - - fmul $T1a,$A1,$ba - fmul $T1b,$A1,$bb - fmul $T2a,$A2,$ba - fmul $T2b,$A2,$bb - fmul $T3a,$A3,$ba - fmul $T3b,$A3,$bb - fmul $T0a,$A0,$ba - fmul $T0b,$A0,$bb - - fmadd $T1a,$A0,$bc,$T1a - fmadd $T1b,$A0,$bd,$T1b - fmadd $T2a,$A1,$bc,$T2a - fmadd $T2b,$A1,$bd,$T2b - fmadd $T3a,$A2,$bc,$T3a - fmadd $T3b,$A2,$bd,$T3b - fmul $dota,$A3,$bc - fmul $dotb,$A3,$bd - - fmadd $T1a,$N1,$na,$T1a - fmadd $T1b,$N1,$nb,$T1b - lfd $A0,8($nap_d) ; load a[j] in double format - lfd $A1,16($nap_d) - fmadd $T2a,$N2,$na,$T2a - fmadd $T2b,$N2,$nb,$T2b - lfd $A2,24($nap_d) ; load a[j+1] in double format - lfd $A3,32($nap_d) - fmadd $T3a,$N3,$na,$T3a - fmadd $T3b,$N3,$nb,$T3b - fmadd $T0a,$N0,$na,$T0a - fmadd $T0b,$N0,$nb,$T0b - - fmadd $T1a,$N0,$nc,$T1a - fmadd $T1b,$N0,$nd,$T1b - fmadd $T2a,$N1,$nc,$T2a - fmadd $T2b,$N1,$nd,$T2b - fmadd $T3a,$N2,$nc,$T3a - fmadd $T3b,$N2,$nd,$T3b - fmadd $dota,$N3,$nc,$dota - fmadd $dotb,$N3,$nd,$dotb - - fctid $T0a,$T0a - fctid $T0b,$T0b - fctid $T1a,$T1a - fctid $T1b,$T1b - fctid $T2a,$T2a - fctid $T2b,$T2b - fctid $T3a,$T3a - fctid $T3b,$T3b - - stfd $T0a,`$FRAME+0`($sp) - stfd $T0b,`$FRAME+8`($sp) - stfd $T1a,`$FRAME+16`($sp) - stfd $T1b,`$FRAME+24`($sp) - stfd $T2a,`$FRAME+32`($sp) - stfd $T2b,`$FRAME+40`($sp) - stfd $T3a,`$FRAME+48`($sp) - stfd $T3b,`$FRAME+56`($sp) - -.align 5 -Linner: - fmul $T1a,$A1,$ba - fmul $T1b,$A1,$bb - fmul $T2a,$A2,$ba - fmul $T2b,$A2,$bb - lfd $N0,40($nap_d) ; load n[j] in double format - lfd $N1,48($nap_d) - fmul $T3a,$A3,$ba - fmul $T3b,$A3,$bb - fmadd $T0a,$A0,$ba,$dota - fmadd $T0b,$A0,$bb,$dotb - lfd $N2,56($nap_d) ; load n[j+1] in double format - lfdu $N3,64($nap_d) - - fmadd $T1a,$A0,$bc,$T1a - fmadd $T1b,$A0,$bd,$T1b - fmadd $T2a,$A1,$bc,$T2a - fmadd $T2b,$A1,$bd,$T2b - lfd $A0,8($nap_d) ; load a[j] in double format - lfd $A1,16($nap_d) - fmadd $T3a,$A2,$bc,$T3a - fmadd $T3b,$A2,$bd,$T3b - fmul $dota,$A3,$bc - fmul $dotb,$A3,$bd - lfd $A2,24($nap_d) ; load a[j+1] in double format - lfd $A3,32($nap_d) - - fmadd $T1a,$N1,$na,$T1a - fmadd $T1b,$N1,$nb,$T1b - ld $t0,`$FRAME+0`($sp) - ld $t1,`$FRAME+8`($sp) - fmadd $T2a,$N2,$na,$T2a - fmadd $T2b,$N2,$nb,$T2b - ld $t2,`$FRAME+16`($sp) - ld $t3,`$FRAME+24`($sp) - fmadd $T3a,$N3,$na,$T3a - fmadd $T3b,$N3,$nb,$T3b - add $t0,$t0,$carry ; can not overflow - ld $t4,`$FRAME+32`($sp) - ld $t5,`$FRAME+40`($sp) - fmadd $T0a,$N0,$na,$T0a - fmadd $T0b,$N0,$nb,$T0b - srdi $carry,$t0,16 - add $t1,$t1,$carry - srdi $carry,$t1,16 - ld $t6,`$FRAME+48`($sp) - ld $t7,`$FRAME+56`($sp) - - fmadd $T1a,$N0,$nc,$T1a - fmadd $T1b,$N0,$nd,$T1b - insrdi $t0,$t1,16,32 - ld $t1,8($tp) ; tp[j] - fmadd $T2a,$N1,$nc,$T2a - fmadd $T2b,$N1,$nd,$T2b - add $t2,$t2,$carry - fmadd $T3a,$N2,$nc,$T3a - fmadd $T3b,$N2,$nd,$T3b - srdi $carry,$t2,16 - insrdi $t0,$t2,16,16 - fmadd $dota,$N3,$nc,$dota - fmadd $dotb,$N3,$nd,$dotb - add $t3,$t3,$carry - ldu $t2,16($tp) ; tp[j+1] - srdi $carry,$t3,16 - insrdi $t0,$t3,16,0 ; 0..63 bits - add $t4,$t4,$carry - - fctid $T0a,$T0a - fctid $T0b,$T0b - srdi $carry,$t4,16 - fctid $T1a,$T1a - fctid $T1b,$T1b - add $t5,$t5,$carry - fctid $T2a,$T2a - fctid $T2b,$T2b - srdi $carry,$t5,16 - insrdi $t4,$t5,16,32 - fctid $T3a,$T3a - fctid $T3b,$T3b - add $t6,$t6,$carry - srdi $carry,$t6,16 - insrdi $t4,$t6,16,16 - - stfd $T0a,`$FRAME+0`($sp) - stfd $T0b,`$FRAME+8`($sp) - add $t7,$t7,$carry - addc $t3,$t0,$t1 - stfd $T1a,`$FRAME+16`($sp) - stfd $T1b,`$FRAME+24`($sp) - insrdi $t4,$t7,16,0 ; 64..127 bits - srdi $carry,$t7,16 ; upper 33 bits - stfd $T2a,`$FRAME+32`($sp) - stfd $T2b,`$FRAME+40`($sp) - adde $t5,$t4,$t2 - stfd $T3a,`$FRAME+48`($sp) - stfd $T3b,`$FRAME+56`($sp) - addze $carry,$carry - std $t3,-16($tp) ; tp[j-1] - std $t5,-8($tp) ; tp[j] - bdnz- Linner - - fctid $dota,$dota - fctid $dotb,$dotb - ld $t0,`$FRAME+0`($sp) - ld $t1,`$FRAME+8`($sp) - ld $t2,`$FRAME+16`($sp) - ld $t3,`$FRAME+24`($sp) - ld $t4,`$FRAME+32`($sp) - ld $t5,`$FRAME+40`($sp) - ld $t6,`$FRAME+48`($sp) - ld $t7,`$FRAME+56`($sp) - stfd $dota,`$FRAME+64`($sp) - stfd $dotb,`$FRAME+72`($sp) - - add $t0,$t0,$carry ; can not overflow - srdi $carry,$t0,16 - add $t1,$t1,$carry - srdi $carry,$t1,16 - insrdi $t0,$t1,16,32 - add $t2,$t2,$carry - ld $t1,8($tp) ; tp[j] - srdi $carry,$t2,16 - insrdi $t0,$t2,16,16 - add $t3,$t3,$carry - ldu $t2,16($tp) ; tp[j+1] - srdi $carry,$t3,16 - insrdi $t0,$t3,16,0 ; 0..63 bits - add $t4,$t4,$carry - srdi $carry,$t4,16 - add $t5,$t5,$carry - srdi $carry,$t5,16 - insrdi $t4,$t5,16,32 - add $t6,$t6,$carry - srdi $carry,$t6,16 - insrdi $t4,$t6,16,16 - add $t7,$t7,$carry - insrdi $t4,$t7,16,0 ; 64..127 bits - srdi $carry,$t7,16 ; upper 33 bits - ld $t6,`$FRAME+64`($sp) - ld $t7,`$FRAME+72`($sp) - - addc $t3,$t0,$t1 - adde $t5,$t4,$t2 - addze $carry,$carry - - std $t3,-16($tp) ; tp[j-1] - std $t5,-8($tp) ; tp[j] - - add $carry,$carry,$ovf ; comsume upmost overflow - add $t6,$t6,$carry ; can not overflow - srdi $carry,$t6,16 - add $t7,$t7,$carry - insrdi $t6,$t7,48,0 - srdi $ovf,$t7,48 - std $t6,0($tp) ; tp[num-1] - - slwi $t7,$num,2 - addi $i,$i,8 - subf $nap_d,$t7,$nap_d ; rewind pointer - cmpw $i,$num - blt- Louter - - subf $np,$num,$np ; rewind np - addi $j,$j,1 ; restore counter - subfc $i,$i,$i ; j=0 and "clear" XER[CA] - addi $tp,$sp,`$FRAME+$TRANSFER+8` - addi $t4,$sp,`$FRAME+$TRANSFER+16` - addi $t5,$np,8 - addi $t6,$rp,8 - mtctr $j - -.align 4 -Lsub: ldx $t0,$tp,$i - ldx $t1,$np,$i - ldx $t2,$t4,$i - ldx $t3,$t5,$i - subfe $t0,$t1,$t0 ; tp[j]-np[j] - subfe $t2,$t3,$t2 ; tp[j+1]-np[j+1] - stdx $t0,$rp,$i - stdx $t2,$t6,$i - addi $i,$i,16 - bdnz- Lsub - - li $i,0 - subfe $ovf,$i,$ovf ; handle upmost overflow bit - and $ap,$tp,$ovf - andc $np,$rp,$ovf - or $ap,$ap,$np ; ap=borrow?tp:rp - addi $t7,$ap,8 - mtctr $j - -.align 4 -Lcopy: ; copy or in-place refresh - ldx $t0,$ap,$i - ldx $t1,$t7,$i - std $i,8($nap_d) ; zap nap_d - std $i,16($nap_d) - std $i,24($nap_d) - std $i,32($nap_d) - std $i,40($nap_d) - std $i,48($nap_d) - std $i,56($nap_d) - stdu $i,64($nap_d) - stdx $t0,$rp,$i - stdx $t1,$t6,$i - stdx $i,$tp,$i ; zap tp at once - stdx $i,$t4,$i - addi $i,$i,16 - bdnz- Lcopy - - $POP r14,`2*$SIZE_T`($sp) - $POP r15,`3*$SIZE_T`($sp) - $POP r16,`4*$SIZE_T`($sp) - $POP r17,`5*$SIZE_T`($sp) - $POP r18,`6*$SIZE_T`($sp) - $POP r19,`7*$SIZE_T`($sp) - $POP r20,`8*$SIZE_T`($sp) - $POP r21,`9*$SIZE_T`($sp) - $POP r22,`10*$SIZE_T`($sp) - $POP r23,`11*$SIZE_T`($sp) - lfd f14,`12*$SIZE_T+0`($sp) - lfd f15,`12*$SIZE_T+8`($sp) - lfd f16,`12*$SIZE_T+16`($sp) - lfd f17,`12*$SIZE_T+24`($sp) - lfd f18,`12*$SIZE_T+32`($sp) - lfd f19,`12*$SIZE_T+40`($sp) - lfd f20,`12*$SIZE_T+48`($sp) - lfd f21,`12*$SIZE_T+56`($sp) - lfd f22,`12*$SIZE_T+64`($sp) - lfd f23,`12*$SIZE_T+72`($sp) - lfd f24,`12*$SIZE_T+80`($sp) - lfd f25,`12*$SIZE_T+88`($sp) - $POP $sp,0($sp) - li r3,1 ; signal "handled" - blr - .long 0 -.asciz "Montgomery Multiplication for PPC64, CRYPTOGAMS by <appro\@fy.chalmers.se>" -___ - -$code =~ s/\`([^\`]*)\`/eval $1/gem; -print $code; -close STDOUT; diff --git a/app/openssl/crypto/bn/asm/s390x-mont.pl b/app/openssl/crypto/bn/asm/s390x-mont.pl deleted file mode 100644 index f61246f5..00000000 --- a/app/openssl/crypto/bn/asm/s390x-mont.pl +++ /dev/null @@ -1,225 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# April 2007. -# -# Performance improvement over vanilla C code varies from 85% to 45% -# depending on key length and benchmark. Unfortunately in this context -# these are not very impressive results [for code that utilizes "wide" -# 64x64=128-bit multiplication, which is not commonly available to C -# programmers], at least hand-coded bn_asm.c replacement is known to -# provide 30-40% better results for longest keys. Well, on a second -# thought it's not very surprising, because z-CPUs are single-issue -# and _strictly_ in-order execution, while bn_mul_mont is more or less -# dependent on CPU ability to pipe-line instructions and have several -# of them "in-flight" at the same time. I mean while other methods, -# for example Karatsuba, aim to minimize amount of multiplications at -# the cost of other operations increase, bn_mul_mont aim to neatly -# "overlap" multiplications and the other operations [and on most -# platforms even minimize the amount of the other operations, in -# particular references to memory]. But it's possible to improve this -# module performance by implementing dedicated squaring code-path and -# possibly by unrolling loops... - -# January 2009. -# -# Reschedule to minimize/avoid Address Generation Interlock hazard, -# make inner loops counter-based. - -$mn0="%r0"; -$num="%r1"; - -# int bn_mul_mont( -$rp="%r2"; # BN_ULONG *rp, -$ap="%r3"; # const BN_ULONG *ap, -$bp="%r4"; # const BN_ULONG *bp, -$np="%r5"; # const BN_ULONG *np, -$n0="%r6"; # const BN_ULONG *n0, -#$num="160(%r15)" # int num); - -$bi="%r2"; # zaps rp -$j="%r7"; - -$ahi="%r8"; -$alo="%r9"; -$nhi="%r10"; -$nlo="%r11"; -$AHI="%r12"; -$NHI="%r13"; -$count="%r14"; -$sp="%r15"; - -$code.=<<___; -.text -.globl bn_mul_mont -.type bn_mul_mont,\@function -bn_mul_mont: - lgf $num,164($sp) # pull $num - sla $num,3 # $num to enumerate bytes - la $bp,0($num,$bp) - - stg %r2,16($sp) - - cghi $num,16 # - lghi %r2,0 # - blr %r14 # if($num<16) return 0; - cghi $num,96 # - bhr %r14 # if($num>96) return 0; - - stmg %r3,%r15,24($sp) - - lghi $rp,-160-8 # leave room for carry bit - lcgr $j,$num # -$num - lgr %r0,$sp - la $rp,0($rp,$sp) - la $sp,0($j,$rp) # alloca - stg %r0,0($sp) # back chain - - sra $num,3 # restore $num - la $bp,0($j,$bp) # restore $bp - ahi $num,-1 # adjust $num for inner loop - lg $n0,0($n0) # pull n0 - - lg $bi,0($bp) - lg $alo,0($ap) - mlgr $ahi,$bi # ap[0]*bp[0] - lgr $AHI,$ahi - - lgr $mn0,$alo # "tp[0]"*n0 - msgr $mn0,$n0 - - lg $nlo,0($np) # - mlgr $nhi,$mn0 # np[0]*m1 - algr $nlo,$alo # +="tp[0]" - lghi $NHI,0 - alcgr $NHI,$nhi - - la $j,8(%r0) # j=1 - lr $count,$num - -.align 16 -.L1st: - lg $alo,0($j,$ap) - mlgr $ahi,$bi # ap[j]*bp[0] - algr $alo,$AHI - lghi $AHI,0 - alcgr $AHI,$ahi - - lg $nlo,0($j,$np) - mlgr $nhi,$mn0 # np[j]*m1 - algr $nlo,$NHI - lghi $NHI,0 - alcgr $nhi,$NHI # +="tp[j]" - algr $nlo,$alo - alcgr $NHI,$nhi - - stg $nlo,160-8($j,$sp) # tp[j-1]= - la $j,8($j) # j++ - brct $count,.L1st - - algr $NHI,$AHI - lghi $AHI,0 - alcgr $AHI,$AHI # upmost overflow bit - stg $NHI,160-8($j,$sp) - stg $AHI,160($j,$sp) - la $bp,8($bp) # bp++ - -.Louter: - lg $bi,0($bp) # bp[i] - lg $alo,0($ap) - mlgr $ahi,$bi # ap[0]*bp[i] - alg $alo,160($sp) # +=tp[0] - lghi $AHI,0 - alcgr $AHI,$ahi - - lgr $mn0,$alo - msgr $mn0,$n0 # tp[0]*n0 - - lg $nlo,0($np) # np[0] - mlgr $nhi,$mn0 # np[0]*m1 - algr $nlo,$alo # +="tp[0]" - lghi $NHI,0 - alcgr $NHI,$nhi - - la $j,8(%r0) # j=1 - lr $count,$num - -.align 16 -.Linner: - lg $alo,0($j,$ap) - mlgr $ahi,$bi # ap[j]*bp[i] - algr $alo,$AHI - lghi $AHI,0 - alcgr $ahi,$AHI - alg $alo,160($j,$sp)# +=tp[j] - alcgr $AHI,$ahi - - lg $nlo,0($j,$np) - mlgr $nhi,$mn0 # np[j]*m1 - algr $nlo,$NHI - lghi $NHI,0 - alcgr $nhi,$NHI - algr $nlo,$alo # +="tp[j]" - alcgr $NHI,$nhi - - stg $nlo,160-8($j,$sp) # tp[j-1]= - la $j,8($j) # j++ - brct $count,.Linner - - algr $NHI,$AHI - lghi $AHI,0 - alcgr $AHI,$AHI - alg $NHI,160($j,$sp)# accumulate previous upmost overflow bit - lghi $ahi,0 - alcgr $AHI,$ahi # new upmost overflow bit - stg $NHI,160-8($j,$sp) - stg $AHI,160($j,$sp) - - la $bp,8($bp) # bp++ - clg $bp,160+8+32($j,$sp) # compare to &bp[num] - jne .Louter - - lg $rp,160+8+16($j,$sp) # reincarnate rp - la $ap,160($sp) - ahi $num,1 # restore $num, incidentally clears "borrow" - - la $j,0(%r0) - lr $count,$num -.Lsub: lg $alo,0($j,$ap) - slbg $alo,0($j,$np) - stg $alo,0($j,$rp) - la $j,8($j) - brct $count,.Lsub - lghi $ahi,0 - slbgr $AHI,$ahi # handle upmost carry - - ngr $ap,$AHI - lghi $np,-1 - xgr $np,$AHI - ngr $np,$rp - ogr $ap,$np # ap=borrow?tp:rp - - la $j,0(%r0) - lgr $count,$num -.Lcopy: lg $alo,0($j,$ap) # copy or in-place refresh - stg $j,160($j,$sp) # zap tp - stg $alo,0($j,$rp) - la $j,8($j) - brct $count,.Lcopy - - la %r1,160+8+48($j,$sp) - lmg %r6,%r15,0(%r1) - lghi %r2,1 # signal "processed" - br %r14 -.size bn_mul_mont,.-bn_mul_mont -.string "Montgomery Multiplication for s390x, CRYPTOGAMS by <appro\@openssl.org>" -___ - -print $code; -close STDOUT; diff --git a/app/openssl/crypto/bn/asm/s390x.S b/app/openssl/crypto/bn/asm/s390x.S deleted file mode 100755 index 43fcb79b..00000000 --- a/app/openssl/crypto/bn/asm/s390x.S +++ /dev/null @@ -1,678 +0,0 @@ -.ident "s390x.S, version 1.1" -// ==================================================================== -// Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -// project. -// -// Rights for redistribution and usage in source and binary forms are -// granted according to the OpenSSL license. Warranty of any kind is -// disclaimed. -// ==================================================================== - -.text - -#define zero %r0 - -// BN_ULONG bn_mul_add_words(BN_ULONG *r2,BN_ULONG *r3,int r4,BN_ULONG r5); -.globl bn_mul_add_words -.type bn_mul_add_words,@function -.align 4 -bn_mul_add_words: - lghi zero,0 // zero = 0 - la %r1,0(%r2) // put rp aside - lghi %r2,0 // i=0; - ltgfr %r4,%r4 - bler %r14 // if (len<=0) return 0; - - stmg %r6,%r10,48(%r15) - lghi %r10,3 - lghi %r8,0 // carry = 0 - nr %r10,%r4 // len%4 - sra %r4,2 // cnt=len/4 - jz .Loop1_madd // carry is incidentally cleared if branch taken - algr zero,zero // clear carry - -.Loop4_madd: - lg %r7,0(%r2,%r3) // ap[i] - mlgr %r6,%r5 // *=w - alcgr %r7,%r8 // +=carry - alcgr %r6,zero - alg %r7,0(%r2,%r1) // +=rp[i] - stg %r7,0(%r2,%r1) // rp[i]= - - lg %r9,8(%r2,%r3) - mlgr %r8,%r5 - alcgr %r9,%r6 - alcgr %r8,zero - alg %r9,8(%r2,%r1) - stg %r9,8(%r2,%r1) - - lg %r7,16(%r2,%r3) - mlgr %r6,%r5 - alcgr %r7,%r8 - alcgr %r6,zero - alg %r7,16(%r2,%r1) - stg %r7,16(%r2,%r1) - - lg %r9,24(%r2,%r3) - mlgr %r8,%r5 - alcgr %r9,%r6 - alcgr %r8,zero - alg %r9,24(%r2,%r1) - stg %r9,24(%r2,%r1) - - la %r2,32(%r2) // i+=4 - brct %r4,.Loop4_madd - - la %r10,1(%r10) // see if len%4 is zero ... - brct %r10,.Loop1_madd // without touching condition code:-) - -.Lend_madd: - alcgr %r8,zero // collect carry bit - lgr %r2,%r8 - lmg %r6,%r10,48(%r15) - br %r14 - -.Loop1_madd: - lg %r7,0(%r2,%r3) // ap[i] - mlgr %r6,%r5 // *=w - alcgr %r7,%r8 // +=carry - alcgr %r6,zero - alg %r7,0(%r2,%r1) // +=rp[i] - stg %r7,0(%r2,%r1) // rp[i]= - - lgr %r8,%r6 - la %r2,8(%r2) // i++ - brct %r10,.Loop1_madd - - j .Lend_madd -.size bn_mul_add_words,.-bn_mul_add_words - -// BN_ULONG bn_mul_words(BN_ULONG *r2,BN_ULONG *r3,int r4,BN_ULONG r5); -.globl bn_mul_words -.type bn_mul_words,@function -.align 4 -bn_mul_words: - lghi zero,0 // zero = 0 - la %r1,0(%r2) // put rp aside - lghi %r2,0 // i=0; - ltgfr %r4,%r4 - bler %r14 // if (len<=0) return 0; - - stmg %r6,%r10,48(%r15) - lghi %r10,3 - lghi %r8,0 // carry = 0 - nr %r10,%r4 // len%4 - sra %r4,2 // cnt=len/4 - jz .Loop1_mul // carry is incidentally cleared if branch taken - algr zero,zero // clear carry - -.Loop4_mul: - lg %r7,0(%r2,%r3) // ap[i] - mlgr %r6,%r5 // *=w - alcgr %r7,%r8 // +=carry - stg %r7,0(%r2,%r1) // rp[i]= - - lg %r9,8(%r2,%r3) - mlgr %r8,%r5 - alcgr %r9,%r6 - stg %r9,8(%r2,%r1) - - lg %r7,16(%r2,%r3) - mlgr %r6,%r5 - alcgr %r7,%r8 - stg %r7,16(%r2,%r1) - - lg %r9,24(%r2,%r3) - mlgr %r8,%r5 - alcgr %r9,%r6 - stg %r9,24(%r2,%r1) - - la %r2,32(%r2) // i+=4 - brct %r4,.Loop4_mul - - la %r10,1(%r10) // see if len%4 is zero ... - brct %r10,.Loop1_mul // without touching condition code:-) - -.Lend_mul: - alcgr %r8,zero // collect carry bit - lgr %r2,%r8 - lmg %r6,%r10,48(%r15) - br %r14 - -.Loop1_mul: - lg %r7,0(%r2,%r3) // ap[i] - mlgr %r6,%r5 // *=w - alcgr %r7,%r8 // +=carry - stg %r7,0(%r2,%r1) // rp[i]= - - lgr %r8,%r6 - la %r2,8(%r2) // i++ - brct %r10,.Loop1_mul - - j .Lend_mul -.size bn_mul_words,.-bn_mul_words - -// void bn_sqr_words(BN_ULONG *r2,BN_ULONG *r2,int r4) -.globl bn_sqr_words -.type bn_sqr_words,@function -.align 4 -bn_sqr_words: - ltgfr %r4,%r4 - bler %r14 - - stmg %r6,%r7,48(%r15) - srag %r1,%r4,2 // cnt=len/4 - jz .Loop1_sqr - -.Loop4_sqr: - lg %r7,0(%r3) - mlgr %r6,%r7 - stg %r7,0(%r2) - stg %r6,8(%r2) - - lg %r7,8(%r3) - mlgr %r6,%r7 - stg %r7,16(%r2) - stg %r6,24(%r2) - - lg %r7,16(%r3) - mlgr %r6,%r7 - stg %r7,32(%r2) - stg %r6,40(%r2) - - lg %r7,24(%r3) - mlgr %r6,%r7 - stg %r7,48(%r2) - stg %r6,56(%r2) - - la %r3,32(%r3) - la %r2,64(%r2) - brct %r1,.Loop4_sqr - - lghi %r1,3 - nr %r4,%r1 // cnt=len%4 - jz .Lend_sqr - -.Loop1_sqr: - lg %r7,0(%r3) - mlgr %r6,%r7 - stg %r7,0(%r2) - stg %r6,8(%r2) - - la %r3,8(%r3) - la %r2,16(%r2) - brct %r4,.Loop1_sqr - -.Lend_sqr: - lmg %r6,%r7,48(%r15) - br %r14 -.size bn_sqr_words,.-bn_sqr_words - -// BN_ULONG bn_div_words(BN_ULONG h,BN_ULONG l,BN_ULONG d); -.globl bn_div_words -.type bn_div_words,@function -.align 4 -bn_div_words: - dlgr %r2,%r4 - lgr %r2,%r3 - br %r14 -.size bn_div_words,.-bn_div_words - -// BN_ULONG bn_add_words(BN_ULONG *r2,BN_ULONG *r3,BN_ULONG *r4,int r5); -.globl bn_add_words -.type bn_add_words,@function -.align 4 -bn_add_words: - la %r1,0(%r2) // put rp aside - lghi %r2,0 // i=0 - ltgfr %r5,%r5 - bler %r14 // if (len<=0) return 0; - - stg %r6,48(%r15) - lghi %r6,3 - nr %r6,%r5 // len%4 - sra %r5,2 // len/4, use sra because it sets condition code - jz .Loop1_add // carry is incidentally cleared if branch taken - algr %r2,%r2 // clear carry - -.Loop4_add: - lg %r0,0(%r2,%r3) - alcg %r0,0(%r2,%r4) - stg %r0,0(%r2,%r1) - lg %r0,8(%r2,%r3) - alcg %r0,8(%r2,%r4) - stg %r0,8(%r2,%r1) - lg %r0,16(%r2,%r3) - alcg %r0,16(%r2,%r4) - stg %r0,16(%r2,%r1) - lg %r0,24(%r2,%r3) - alcg %r0,24(%r2,%r4) - stg %r0,24(%r2,%r1) - - la %r2,32(%r2) // i+=4 - brct %r5,.Loop4_add - - la %r6,1(%r6) // see if len%4 is zero ... - brct %r6,.Loop1_add // without touching condition code:-) - -.Lexit_add: - lghi %r2,0 - alcgr %r2,%r2 - lg %r6,48(%r15) - br %r14 - -.Loop1_add: - lg %r0,0(%r2,%r3) - alcg %r0,0(%r2,%r4) - stg %r0,0(%r2,%r1) - - la %r2,8(%r2) // i++ - brct %r6,.Loop1_add - - j .Lexit_add -.size bn_add_words,.-bn_add_words - -// BN_ULONG bn_sub_words(BN_ULONG *r2,BN_ULONG *r3,BN_ULONG *r4,int r5); -.globl bn_sub_words -.type bn_sub_words,@function -.align 4 -bn_sub_words: - la %r1,0(%r2) // put rp aside - lghi %r2,0 // i=0 - ltgfr %r5,%r5 - bler %r14 // if (len<=0) return 0; - - stg %r6,48(%r15) - lghi %r6,3 - nr %r6,%r5 // len%4 - sra %r5,2 // len/4, use sra because it sets condition code - jnz .Loop4_sub // borrow is incidentally cleared if branch taken - slgr %r2,%r2 // clear borrow - -.Loop1_sub: - lg %r0,0(%r2,%r3) - slbg %r0,0(%r2,%r4) - stg %r0,0(%r2,%r1) - - la %r2,8(%r2) // i++ - brct %r6,.Loop1_sub - j .Lexit_sub - -.Loop4_sub: - lg %r0,0(%r2,%r3) - slbg %r0,0(%r2,%r4) - stg %r0,0(%r2,%r1) - lg %r0,8(%r2,%r3) - slbg %r0,8(%r2,%r4) - stg %r0,8(%r2,%r1) - lg %r0,16(%r2,%r3) - slbg %r0,16(%r2,%r4) - stg %r0,16(%r2,%r1) - lg %r0,24(%r2,%r3) - slbg %r0,24(%r2,%r4) - stg %r0,24(%r2,%r1) - - la %r2,32(%r2) // i+=4 - brct %r5,.Loop4_sub - - la %r6,1(%r6) // see if len%4 is zero ... - brct %r6,.Loop1_sub // without touching condition code:-) - -.Lexit_sub: - lghi %r2,0 - slbgr %r2,%r2 - lcgr %r2,%r2 - lg %r6,48(%r15) - br %r14 -.size bn_sub_words,.-bn_sub_words - -#define c1 %r1 -#define c2 %r5 -#define c3 %r8 - -#define mul_add_c(ai,bi,c1,c2,c3) \ - lg %r7,ai*8(%r3); \ - mlg %r6,bi*8(%r4); \ - algr c1,%r7; \ - alcgr c2,%r6; \ - alcgr c3,zero - -// void bn_mul_comba8(BN_ULONG *r2,BN_ULONG *r3,BN_ULONG *r4); -.globl bn_mul_comba8 -.type bn_mul_comba8,@function -.align 4 -bn_mul_comba8: - stmg %r6,%r8,48(%r15) - - lghi c1,0 - lghi c2,0 - lghi c3,0 - lghi zero,0 - - mul_add_c(0,0,c1,c2,c3); - stg c1,0*8(%r2) - lghi c1,0 - - mul_add_c(0,1,c2,c3,c1); - mul_add_c(1,0,c2,c3,c1); - stg c2,1*8(%r2) - lghi c2,0 - - mul_add_c(2,0,c3,c1,c2); - mul_add_c(1,1,c3,c1,c2); - mul_add_c(0,2,c3,c1,c2); - stg c3,2*8(%r2) - lghi c3,0 - - mul_add_c(0,3,c1,c2,c3); - mul_add_c(1,2,c1,c2,c3); - mul_add_c(2,1,c1,c2,c3); - mul_add_c(3,0,c1,c2,c3); - stg c1,3*8(%r2) - lghi c1,0 - - mul_add_c(4,0,c2,c3,c1); - mul_add_c(3,1,c2,c3,c1); - mul_add_c(2,2,c2,c3,c1); - mul_add_c(1,3,c2,c3,c1); - mul_add_c(0,4,c2,c3,c1); - stg c2,4*8(%r2) - lghi c2,0 - - mul_add_c(0,5,c3,c1,c2); - mul_add_c(1,4,c3,c1,c2); - mul_add_c(2,3,c3,c1,c2); - mul_add_c(3,2,c3,c1,c2); - mul_add_c(4,1,c3,c1,c2); - mul_add_c(5,0,c3,c1,c2); - stg c3,5*8(%r2) - lghi c3,0 - - mul_add_c(6,0,c1,c2,c3); - mul_add_c(5,1,c1,c2,c3); - mul_add_c(4,2,c1,c2,c3); - mul_add_c(3,3,c1,c2,c3); - mul_add_c(2,4,c1,c2,c3); - mul_add_c(1,5,c1,c2,c3); - mul_add_c(0,6,c1,c2,c3); - stg c1,6*8(%r2) - lghi c1,0 - - mul_add_c(0,7,c2,c3,c1); - mul_add_c(1,6,c2,c3,c1); - mul_add_c(2,5,c2,c3,c1); - mul_add_c(3,4,c2,c3,c1); - mul_add_c(4,3,c2,c3,c1); - mul_add_c(5,2,c2,c3,c1); - mul_add_c(6,1,c2,c3,c1); - mul_add_c(7,0,c2,c3,c1); - stg c2,7*8(%r2) - lghi c2,0 - - mul_add_c(7,1,c3,c1,c2); - mul_add_c(6,2,c3,c1,c2); - mul_add_c(5,3,c3,c1,c2); - mul_add_c(4,4,c3,c1,c2); - mul_add_c(3,5,c3,c1,c2); - mul_add_c(2,6,c3,c1,c2); - mul_add_c(1,7,c3,c1,c2); - stg c3,8*8(%r2) - lghi c3,0 - - mul_add_c(2,7,c1,c2,c3); - mul_add_c(3,6,c1,c2,c3); - mul_add_c(4,5,c1,c2,c3); - mul_add_c(5,4,c1,c2,c3); - mul_add_c(6,3,c1,c2,c3); - mul_add_c(7,2,c1,c2,c3); - stg c1,9*8(%r2) - lghi c1,0 - - mul_add_c(7,3,c2,c3,c1); - mul_add_c(6,4,c2,c3,c1); - mul_add_c(5,5,c2,c3,c1); - mul_add_c(4,6,c2,c3,c1); - mul_add_c(3,7,c2,c3,c1); - stg c2,10*8(%r2) - lghi c2,0 - - mul_add_c(4,7,c3,c1,c2); - mul_add_c(5,6,c3,c1,c2); - mul_add_c(6,5,c3,c1,c2); - mul_add_c(7,4,c3,c1,c2); - stg c3,11*8(%r2) - lghi c3,0 - - mul_add_c(7,5,c1,c2,c3); - mul_add_c(6,6,c1,c2,c3); - mul_add_c(5,7,c1,c2,c3); - stg c1,12*8(%r2) - lghi c1,0 - - - mul_add_c(6,7,c2,c3,c1); - mul_add_c(7,6,c2,c3,c1); - stg c2,13*8(%r2) - lghi c2,0 - - mul_add_c(7,7,c3,c1,c2); - stg c3,14*8(%r2) - stg c1,15*8(%r2) - - lmg %r6,%r8,48(%r15) - br %r14 -.size bn_mul_comba8,.-bn_mul_comba8 - -// void bn_mul_comba4(BN_ULONG *r2,BN_ULONG *r3,BN_ULONG *r4); -.globl bn_mul_comba4 -.type bn_mul_comba4,@function -.align 4 -bn_mul_comba4: - stmg %r6,%r8,48(%r15) - - lghi c1,0 - lghi c2,0 - lghi c3,0 - lghi zero,0 - - mul_add_c(0,0,c1,c2,c3); - stg c1,0*8(%r3) - lghi c1,0 - - mul_add_c(0,1,c2,c3,c1); - mul_add_c(1,0,c2,c3,c1); - stg c2,1*8(%r2) - lghi c2,0 - - mul_add_c(2,0,c3,c1,c2); - mul_add_c(1,1,c3,c1,c2); - mul_add_c(0,2,c3,c1,c2); - stg c3,2*8(%r2) - lghi c3,0 - - mul_add_c(0,3,c1,c2,c3); - mul_add_c(1,2,c1,c2,c3); - mul_add_c(2,1,c1,c2,c3); - mul_add_c(3,0,c1,c2,c3); - stg c1,3*8(%r2) - lghi c1,0 - - mul_add_c(3,1,c2,c3,c1); - mul_add_c(2,2,c2,c3,c1); - mul_add_c(1,3,c2,c3,c1); - stg c2,4*8(%r2) - lghi c2,0 - - mul_add_c(2,3,c3,c1,c2); - mul_add_c(3,2,c3,c1,c2); - stg c3,5*8(%r2) - lghi c3,0 - - mul_add_c(3,3,c1,c2,c3); - stg c1,6*8(%r2) - stg c2,7*8(%r2) - - stmg %r6,%r8,48(%r15) - br %r14 -.size bn_mul_comba4,.-bn_mul_comba4 - -#define sqr_add_c(ai,c1,c2,c3) \ - lg %r7,ai*8(%r3); \ - mlgr %r6,%r7; \ - algr c1,%r7; \ - alcgr c2,%r6; \ - alcgr c3,zero - -#define sqr_add_c2(ai,aj,c1,c2,c3) \ - lg %r7,ai*8(%r3); \ - mlg %r6,aj*8(%r3); \ - algr c1,%r7; \ - alcgr c2,%r6; \ - alcgr c3,zero; \ - algr c1,%r7; \ - alcgr c2,%r6; \ - alcgr c3,zero - -// void bn_sqr_comba8(BN_ULONG *r2,BN_ULONG *r3); -.globl bn_sqr_comba8 -.type bn_sqr_comba8,@function -.align 4 -bn_sqr_comba8: - stmg %r6,%r8,48(%r15) - - lghi c1,0 - lghi c2,0 - lghi c3,0 - lghi zero,0 - - sqr_add_c(0,c1,c2,c3); - stg c1,0*8(%r2) - lghi c1,0 - - sqr_add_c2(1,0,c2,c3,c1); - stg c2,1*8(%r2) - lghi c2,0 - - sqr_add_c(1,c3,c1,c2); - sqr_add_c2(2,0,c3,c1,c2); - stg c3,2*8(%r2) - lghi c3,0 - - sqr_add_c2(3,0,c1,c2,c3); - sqr_add_c2(2,1,c1,c2,c3); - stg c1,3*8(%r2) - lghi c1,0 - - sqr_add_c(2,c2,c3,c1); - sqr_add_c2(3,1,c2,c3,c1); - sqr_add_c2(4,0,c2,c3,c1); - stg c2,4*8(%r2) - lghi c2,0 - - sqr_add_c2(5,0,c3,c1,c2); - sqr_add_c2(4,1,c3,c1,c2); - sqr_add_c2(3,2,c3,c1,c2); - stg c3,5*8(%r2) - lghi c3,0 - - sqr_add_c(3,c1,c2,c3); - sqr_add_c2(4,2,c1,c2,c3); - sqr_add_c2(5,1,c1,c2,c3); - sqr_add_c2(6,0,c1,c2,c3); - stg c1,6*8(%r2) - lghi c1,0 - - sqr_add_c2(7,0,c2,c3,c1); - sqr_add_c2(6,1,c2,c3,c1); - sqr_add_c2(5,2,c2,c3,c1); - sqr_add_c2(4,3,c2,c3,c1); - stg c2,7*8(%r2) - lghi c2,0 - - sqr_add_c(4,c3,c1,c2); - sqr_add_c2(5,3,c3,c1,c2); - sqr_add_c2(6,2,c3,c1,c2); - sqr_add_c2(7,1,c3,c1,c2); - stg c3,8*8(%r2) - lghi c3,0 - - sqr_add_c2(7,2,c1,c2,c3); - sqr_add_c2(6,3,c1,c2,c3); - sqr_add_c2(5,4,c1,c2,c3); - stg c1,9*8(%r2) - lghi c1,0 - - sqr_add_c(5,c2,c3,c1); - sqr_add_c2(6,4,c2,c3,c1); - sqr_add_c2(7,3,c2,c3,c1); - stg c2,10*8(%r2) - lghi c2,0 - - sqr_add_c2(7,4,c3,c1,c2); - sqr_add_c2(6,5,c3,c1,c2); - stg c3,11*8(%r2) - lghi c3,0 - - sqr_add_c(6,c1,c2,c3); - sqr_add_c2(7,5,c1,c2,c3); - stg c1,12*8(%r2) - lghi c1,0 - - sqr_add_c2(7,6,c2,c3,c1); - stg c2,13*8(%r2) - lghi c2,0 - - sqr_add_c(7,c3,c1,c2); - stg c3,14*8(%r2) - stg c1,15*8(%r2) - - lmg %r6,%r8,48(%r15) - br %r14 -.size bn_sqr_comba8,.-bn_sqr_comba8 - -// void bn_sqr_comba4(BN_ULONG *r2,BN_ULONG *r3); -.globl bn_sqr_comba4 -.type bn_sqr_comba4,@function -.align 4 -bn_sqr_comba4: - stmg %r6,%r8,48(%r15) - - lghi c1,0 - lghi c2,0 - lghi c3,0 - lghi zero,0 - - sqr_add_c(0,c1,c2,c3); - stg c1,0*8(%r2) - lghi c1,0 - - sqr_add_c2(1,0,c2,c3,c1); - stg c2,1*8(%r2) - lghi c2,0 - - sqr_add_c(1,c3,c1,c2); - sqr_add_c2(2,0,c3,c1,c2); - stg c3,2*8(%r2) - lghi c3,0 - - sqr_add_c2(3,0,c1,c2,c3); - sqr_add_c2(2,1,c1,c2,c3); - stg c1,3*8(%r2) - lghi c1,0 - - sqr_add_c(2,c2,c3,c1); - sqr_add_c2(3,1,c2,c3,c1); - stg c2,4*8(%r2) - lghi c2,0 - - sqr_add_c2(3,2,c3,c1,c2); - stg c3,5*8(%r2) - lghi c3,0 - - sqr_add_c(3,c1,c2,c3); - stg c1,6*8(%r2) - stg c2,7*8(%r2) - - lmg %r6,%r8,48(%r15) - br %r14 -.size bn_sqr_comba4,.-bn_sqr_comba4 diff --git a/app/openssl/crypto/bn/asm/sparcv8.S b/app/openssl/crypto/bn/asm/sparcv8.S deleted file mode 100644 index 88c5dc48..00000000 --- a/app/openssl/crypto/bn/asm/sparcv8.S +++ /dev/null @@ -1,1458 +0,0 @@ -.ident "sparcv8.s, Version 1.4" -.ident "SPARC v8 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>" - -/* - * ==================================================================== - * Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL - * project. - * - * Rights for redistribution and usage in source and binary forms are - * granted according to the OpenSSL license. Warranty of any kind is - * disclaimed. - * ==================================================================== - */ - -/* - * This is my modest contributon to OpenSSL project (see - * http://www.openssl.org/ for more information about it) and is - * a drop-in SuperSPARC ISA replacement for crypto/bn/bn_asm.c - * module. For updates see http://fy.chalmers.se/~appro/hpe/. - * - * See bn_asm.sparc.v8plus.S for more details. - */ - -/* - * Revision history. - * - * 1.1 - new loop unrolling model(*); - * 1.2 - made gas friendly; - * 1.3 - fixed problem with /usr/ccs/lib/cpp; - * 1.4 - some retunes; - * - * (*) see bn_asm.sparc.v8plus.S for details - */ - -.section ".text",#alloc,#execinstr -.file "bn_asm.sparc.v8.S" - -.align 32 - -.global bn_mul_add_words -/* - * BN_ULONG bn_mul_add_words(rp,ap,num,w) - * BN_ULONG *rp,*ap; - * int num; - * BN_ULONG w; - */ -bn_mul_add_words: - cmp %o2,0 - bg,a .L_bn_mul_add_words_proceed - ld [%o1],%g2 - retl - clr %o0 - -.L_bn_mul_add_words_proceed: - andcc %o2,-4,%g0 - bz .L_bn_mul_add_words_tail - clr %o5 - -.L_bn_mul_add_words_loop: - ld [%o0],%o4 - ld [%o1+4],%g3 - umul %o3,%g2,%g2 - rd %y,%g1 - addcc %o4,%o5,%o4 - addx %g1,0,%g1 - addcc %o4,%g2,%o4 - st %o4,[%o0] - addx %g1,0,%o5 - - ld [%o0+4],%o4 - ld [%o1+8],%g2 - umul %o3,%g3,%g3 - dec 4,%o2 - rd %y,%g1 - addcc %o4,%o5,%o4 - addx %g1,0,%g1 - addcc %o4,%g3,%o4 - st %o4,[%o0+4] - addx %g1,0,%o5 - - ld [%o0+8],%o4 - ld [%o1+12],%g3 - umul %o3,%g2,%g2 - inc 16,%o1 - rd %y,%g1 - addcc %o4,%o5,%o4 - addx %g1,0,%g1 - addcc %o4,%g2,%o4 - st %o4,[%o0+8] - addx %g1,0,%o5 - - ld [%o0+12],%o4 - umul %o3,%g3,%g3 - inc 16,%o0 - rd %y,%g1 - addcc %o4,%o5,%o4 - addx %g1,0,%g1 - addcc %o4,%g3,%o4 - st %o4,[%o0-4] - addx %g1,0,%o5 - andcc %o2,-4,%g0 - bnz,a .L_bn_mul_add_words_loop - ld [%o1],%g2 - - tst %o2 - bnz,a .L_bn_mul_add_words_tail - ld [%o1],%g2 -.L_bn_mul_add_words_return: - retl - mov %o5,%o0 - nop - -.L_bn_mul_add_words_tail: - ld [%o0],%o4 - umul %o3,%g2,%g2 - addcc %o4,%o5,%o4 - rd %y,%g1 - addx %g1,0,%g1 - addcc %o4,%g2,%o4 - addx %g1,0,%o5 - deccc %o2 - bz .L_bn_mul_add_words_return - st %o4,[%o0] - - ld [%o1+4],%g2 - ld [%o0+4],%o4 - umul %o3,%g2,%g2 - rd %y,%g1 - addcc %o4,%o5,%o4 - addx %g1,0,%g1 - addcc %o4,%g2,%o4 - addx %g1,0,%o5 - deccc %o2 - bz .L_bn_mul_add_words_return - st %o4,[%o0+4] - - ld [%o1+8],%g2 - ld [%o0+8],%o4 - umul %o3,%g2,%g2 - rd %y,%g1 - addcc %o4,%o5,%o4 - addx %g1,0,%g1 - addcc %o4,%g2,%o4 - st %o4,[%o0+8] - retl - addx %g1,0,%o0 - -.type bn_mul_add_words,#function -.size bn_mul_add_words,(.-bn_mul_add_words) - -.align 32 - -.global bn_mul_words -/* - * BN_ULONG bn_mul_words(rp,ap,num,w) - * BN_ULONG *rp,*ap; - * int num; - * BN_ULONG w; - */ -bn_mul_words: - cmp %o2,0 - bg,a .L_bn_mul_words_proceeed - ld [%o1],%g2 - retl - clr %o0 - -.L_bn_mul_words_proceeed: - andcc %o2,-4,%g0 - bz .L_bn_mul_words_tail - clr %o5 - -.L_bn_mul_words_loop: - ld [%o1+4],%g3 - umul %o3,%g2,%g2 - addcc %g2,%o5,%g2 - rd %y,%g1 - addx %g1,0,%o5 - st %g2,[%o0] - - ld [%o1+8],%g2 - umul %o3,%g3,%g3 - addcc %g3,%o5,%g3 - rd %y,%g1 - dec 4,%o2 - addx %g1,0,%o5 - st %g3,[%o0+4] - - ld [%o1+12],%g3 - umul %o3,%g2,%g2 - addcc %g2,%o5,%g2 - rd %y,%g1 - inc 16,%o1 - st %g2,[%o0+8] - addx %g1,0,%o5 - - umul %o3,%g3,%g3 - addcc %g3,%o5,%g3 - rd %y,%g1 - inc 16,%o0 - addx %g1,0,%o5 - st %g3,[%o0-4] - andcc %o2,-4,%g0 - nop - bnz,a .L_bn_mul_words_loop - ld [%o1],%g2 - - tst %o2 - bnz,a .L_bn_mul_words_tail - ld [%o1],%g2 -.L_bn_mul_words_return: - retl - mov %o5,%o0 - nop - -.L_bn_mul_words_tail: - umul %o3,%g2,%g2 - addcc %g2,%o5,%g2 - rd %y,%g1 - addx %g1,0,%o5 - deccc %o2 - bz .L_bn_mul_words_return - st %g2,[%o0] - nop - - ld [%o1+4],%g2 - umul %o3,%g2,%g2 - addcc %g2,%o5,%g2 - rd %y,%g1 - addx %g1,0,%o5 - deccc %o2 - bz .L_bn_mul_words_return - st %g2,[%o0+4] - - ld [%o1+8],%g2 - umul %o3,%g2,%g2 - addcc %g2,%o5,%g2 - rd %y,%g1 - st %g2,[%o0+8] - retl - addx %g1,0,%o0 - -.type bn_mul_words,#function -.size bn_mul_words,(.-bn_mul_words) - -.align 32 -.global bn_sqr_words -/* - * void bn_sqr_words(r,a,n) - * BN_ULONG *r,*a; - * int n; - */ -bn_sqr_words: - cmp %o2,0 - bg,a .L_bn_sqr_words_proceeed - ld [%o1],%g2 - retl - clr %o0 - -.L_bn_sqr_words_proceeed: - andcc %o2,-4,%g0 - bz .L_bn_sqr_words_tail - clr %o5 - -.L_bn_sqr_words_loop: - ld [%o1+4],%g3 - umul %g2,%g2,%o4 - st %o4,[%o0] - rd %y,%o5 - st %o5,[%o0+4] - - ld [%o1+8],%g2 - umul %g3,%g3,%o4 - dec 4,%o2 - st %o4,[%o0+8] - rd %y,%o5 - st %o5,[%o0+12] - nop - - ld [%o1+12],%g3 - umul %g2,%g2,%o4 - st %o4,[%o0+16] - rd %y,%o5 - inc 16,%o1 - st %o5,[%o0+20] - - umul %g3,%g3,%o4 - inc 32,%o0 - st %o4,[%o0-8] - rd %y,%o5 - st %o5,[%o0-4] - andcc %o2,-4,%g2 - bnz,a .L_bn_sqr_words_loop - ld [%o1],%g2 - - tst %o2 - nop - bnz,a .L_bn_sqr_words_tail - ld [%o1],%g2 -.L_bn_sqr_words_return: - retl - clr %o0 - -.L_bn_sqr_words_tail: - umul %g2,%g2,%o4 - st %o4,[%o0] - deccc %o2 - rd %y,%o5 - bz .L_bn_sqr_words_return - st %o5,[%o0+4] - - ld [%o1+4],%g2 - umul %g2,%g2,%o4 - st %o4,[%o0+8] - deccc %o2 - rd %y,%o5 - nop - bz .L_bn_sqr_words_return - st %o5,[%o0+12] - - ld [%o1+8],%g2 - umul %g2,%g2,%o4 - st %o4,[%o0+16] - rd %y,%o5 - st %o5,[%o0+20] - retl - clr %o0 - -.type bn_sqr_words,#function -.size bn_sqr_words,(.-bn_sqr_words) - -.align 32 - -.global bn_div_words -/* - * BN_ULONG bn_div_words(h,l,d) - * BN_ULONG h,l,d; - */ -bn_div_words: - wr %o0,%y - udiv %o1,%o2,%o0 - retl - nop - -.type bn_div_words,#function -.size bn_div_words,(.-bn_div_words) - -.align 32 - -.global bn_add_words -/* - * BN_ULONG bn_add_words(rp,ap,bp,n) - * BN_ULONG *rp,*ap,*bp; - * int n; - */ -bn_add_words: - cmp %o3,0 - bg,a .L_bn_add_words_proceed - ld [%o1],%o4 - retl - clr %o0 - -.L_bn_add_words_proceed: - andcc %o3,-4,%g0 - bz .L_bn_add_words_tail - clr %g1 - ba .L_bn_add_words_warn_loop - addcc %g0,0,%g0 ! clear carry flag - -.L_bn_add_words_loop: - ld [%o1],%o4 -.L_bn_add_words_warn_loop: - ld [%o2],%o5 - ld [%o1+4],%g3 - ld [%o2+4],%g4 - dec 4,%o3 - addxcc %o5,%o4,%o5 - st %o5,[%o0] - - ld [%o1+8],%o4 - ld [%o2+8],%o5 - inc 16,%o1 - addxcc %g3,%g4,%g3 - st %g3,[%o0+4] - - ld [%o1-4],%g3 - ld [%o2+12],%g4 - inc 16,%o2 - addxcc %o5,%o4,%o5 - st %o5,[%o0+8] - - inc 16,%o0 - addxcc %g3,%g4,%g3 - st %g3,[%o0-4] - addx %g0,0,%g1 - andcc %o3,-4,%g0 - bnz,a .L_bn_add_words_loop - addcc %g1,-1,%g0 - - tst %o3 - bnz,a .L_bn_add_words_tail - ld [%o1],%o4 -.L_bn_add_words_return: - retl - mov %g1,%o0 - -.L_bn_add_words_tail: - addcc %g1,-1,%g0 - ld [%o2],%o5 - addxcc %o5,%o4,%o5 - addx %g0,0,%g1 - deccc %o3 - bz .L_bn_add_words_return - st %o5,[%o0] - - ld [%o1+4],%o4 - addcc %g1,-1,%g0 - ld [%o2+4],%o5 - addxcc %o5,%o4,%o5 - addx %g0,0,%g1 - deccc %o3 - bz .L_bn_add_words_return - st %o5,[%o0+4] - - ld [%o1+8],%o4 - addcc %g1,-1,%g0 - ld [%o2+8],%o5 - addxcc %o5,%o4,%o5 - st %o5,[%o0+8] - retl - addx %g0,0,%o0 - -.type bn_add_words,#function -.size bn_add_words,(.-bn_add_words) - -.align 32 - -.global bn_sub_words -/* - * BN_ULONG bn_sub_words(rp,ap,bp,n) - * BN_ULONG *rp,*ap,*bp; - * int n; - */ -bn_sub_words: - cmp %o3,0 - bg,a .L_bn_sub_words_proceed - ld [%o1],%o4 - retl - clr %o0 - -.L_bn_sub_words_proceed: - andcc %o3,-4,%g0 - bz .L_bn_sub_words_tail - clr %g1 - ba .L_bn_sub_words_warm_loop - addcc %g0,0,%g0 ! clear carry flag - -.L_bn_sub_words_loop: - ld [%o1],%o4 -.L_bn_sub_words_warm_loop: - ld [%o2],%o5 - ld [%o1+4],%g3 - ld [%o2+4],%g4 - dec 4,%o3 - subxcc %o4,%o5,%o5 - st %o5,[%o0] - - ld [%o1+8],%o4 - ld [%o2+8],%o5 - inc 16,%o1 - subxcc %g3,%g4,%g4 - st %g4,[%o0+4] - - ld [%o1-4],%g3 - ld [%o2+12],%g4 - inc 16,%o2 - subxcc %o4,%o5,%o5 - st %o5,[%o0+8] - - inc 16,%o0 - subxcc %g3,%g4,%g4 - st %g4,[%o0-4] - addx %g0,0,%g1 - andcc %o3,-4,%g0 - bnz,a .L_bn_sub_words_loop - addcc %g1,-1,%g0 - - tst %o3 - nop - bnz,a .L_bn_sub_words_tail - ld [%o1],%o4 -.L_bn_sub_words_return: - retl - mov %g1,%o0 - -.L_bn_sub_words_tail: - addcc %g1,-1,%g0 - ld [%o2],%o5 - subxcc %o4,%o5,%o5 - addx %g0,0,%g1 - deccc %o3 - bz .L_bn_sub_words_return - st %o5,[%o0] - nop - - ld [%o1+4],%o4 - addcc %g1,-1,%g0 - ld [%o2+4],%o5 - subxcc %o4,%o5,%o5 - addx %g0,0,%g1 - deccc %o3 - bz .L_bn_sub_words_return - st %o5,[%o0+4] - - ld [%o1+8],%o4 - addcc %g1,-1,%g0 - ld [%o2+8],%o5 - subxcc %o4,%o5,%o5 - st %o5,[%o0+8] - retl - addx %g0,0,%o0 - -.type bn_sub_words,#function -.size bn_sub_words,(.-bn_sub_words) - -#define FRAME_SIZE -96 - -/* - * Here is register usage map for *all* routines below. - */ -#define t_1 %o0 -#define t_2 %o1 -#define c_1 %o2 -#define c_2 %o3 -#define c_3 %o4 - -#define ap(I) [%i1+4*I] -#define bp(I) [%i2+4*I] -#define rp(I) [%i0+4*I] - -#define a_0 %l0 -#define a_1 %l1 -#define a_2 %l2 -#define a_3 %l3 -#define a_4 %l4 -#define a_5 %l5 -#define a_6 %l6 -#define a_7 %l7 - -#define b_0 %i3 -#define b_1 %i4 -#define b_2 %i5 -#define b_3 %o5 -#define b_4 %g1 -#define b_5 %g2 -#define b_6 %g3 -#define b_7 %g4 - -.align 32 -.global bn_mul_comba8 -/* - * void bn_mul_comba8(r,a,b) - * BN_ULONG *r,*a,*b; - */ -bn_mul_comba8: - save %sp,FRAME_SIZE,%sp - ld ap(0),a_0 - ld bp(0),b_0 - umul a_0,b_0,c_1 !=!mul_add_c(a[0],b[0],c1,c2,c3); - ld bp(1),b_1 - rd %y,c_2 - st c_1,rp(0) !r[0]=c1; - - umul a_0,b_1,t_1 !=!mul_add_c(a[0],b[1],c2,c3,c1); - ld ap(1),a_1 - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc %g0,t_2,c_3 != - addx %g0,%g0,c_1 - ld ap(2),a_2 - umul a_1,b_0,t_1 !mul_add_c(a[1],b[0],c2,c3,c1); - addcc c_2,t_1,c_2 != - rd %y,t_2 - addxcc c_3,t_2,c_3 - st c_2,rp(1) !r[1]=c2; - addx c_1,%g0,c_1 != - - umul a_2,b_0,t_1 !mul_add_c(a[2],b[0],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 != - addx %g0,%g0,c_2 - ld bp(2),b_2 - umul a_1,b_1,t_1 !mul_add_c(a[1],b[1],c3,c1,c2); - addcc c_3,t_1,c_3 != - rd %y,t_2 - addxcc c_1,t_2,c_1 - ld bp(3),b_3 - addx c_2,%g0,c_2 != - umul a_0,b_2,t_1 !mul_add_c(a[0],b[2],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 != - addx c_2,%g0,c_2 - st c_3,rp(2) !r[2]=c3; - - umul a_0,b_3,t_1 !mul_add_c(a[0],b[3],c1,c2,c3); - addcc c_1,t_1,c_1 != - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx %g0,%g0,c_3 - umul a_1,b_2,t_1 !=!mul_add_c(a[1],b[2],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - ld ap(3),a_3 - umul a_2,b_1,t_1 !mul_add_c(a[2],b[1],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 != - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 - ld ap(4),a_4 - umul a_3,b_0,t_1 !mul_add_c(a[3],b[0],c1,c2,c3);!= - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - st c_1,rp(3) !r[3]=c1; - - umul a_4,b_0,t_1 !mul_add_c(a[4],b[0],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx %g0,%g0,c_1 - umul a_3,b_1,t_1 !mul_add_c(a[3],b[1],c2,c3,c1); - addcc c_2,t_1,c_2 != - rd %y,t_2 - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - umul a_2,b_2,t_1 !=!mul_add_c(a[2],b[2],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 != - ld bp(4),b_4 - umul a_1,b_3,t_1 !mul_add_c(a[1],b[3],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - ld bp(5),b_5 - umul a_0,b_4,t_1 !=!mul_add_c(a[0],b[4],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 != - st c_2,rp(4) !r[4]=c2; - - umul a_0,b_5,t_1 !mul_add_c(a[0],b[5],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 != - addxcc c_1,t_2,c_1 - addx %g0,%g0,c_2 - umul a_1,b_4,t_1 !mul_add_c(a[1],b[4],c3,c1,c2); - addcc c_3,t_1,c_3 != - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 - umul a_2,b_3,t_1 !=!mul_add_c(a[2],b[3],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 != - umul a_3,b_2,t_1 !mul_add_c(a[3],b[2],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 != - addx c_2,%g0,c_2 - ld ap(5),a_5 - umul a_4,b_1,t_1 !mul_add_c(a[4],b[1],c3,c1,c2); - addcc c_3,t_1,c_3 != - rd %y,t_2 - addxcc c_1,t_2,c_1 - ld ap(6),a_6 - addx c_2,%g0,c_2 != - umul a_5,b_0,t_1 !mul_add_c(a[5],b[0],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 != - addx c_2,%g0,c_2 - st c_3,rp(5) !r[5]=c3; - - umul a_6,b_0,t_1 !mul_add_c(a[6],b[0],c1,c2,c3); - addcc c_1,t_1,c_1 != - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx %g0,%g0,c_3 - umul a_5,b_1,t_1 !=!mul_add_c(a[5],b[1],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - umul a_4,b_2,t_1 !mul_add_c(a[4],b[2],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - addx c_3,%g0,c_3 - umul a_3,b_3,t_1 !mul_add_c(a[3],b[3],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 != - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 - umul a_2,b_4,t_1 !mul_add_c(a[2],b[4],c1,c2,c3); - addcc c_1,t_1,c_1 != - rd %y,t_2 - addxcc c_2,t_2,c_2 - ld bp(6),b_6 - addx c_3,%g0,c_3 != - umul a_1,b_5,t_1 !mul_add_c(a[1],b[5],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - addx c_3,%g0,c_3 - ld bp(7),b_7 - umul a_0,b_6,t_1 !mul_add_c(a[0],b[6],c1,c2,c3); - addcc c_1,t_1,c_1 != - rd %y,t_2 - addxcc c_2,t_2,c_2 - st c_1,rp(6) !r[6]=c1; - addx c_3,%g0,c_3 != - - umul a_0,b_7,t_1 !mul_add_c(a[0],b[7],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc c_3,t_2,c_3 != - addx %g0,%g0,c_1 - umul a_1,b_6,t_1 !mul_add_c(a[1],b[6],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - umul a_2,b_5,t_1 !mul_add_c(a[2],b[5],c2,c3,c1); - addcc c_2,t_1,c_2 != - rd %y,t_2 - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - umul a_3,b_4,t_1 !=!mul_add_c(a[3],b[4],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 != - umul a_4,b_3,t_1 !mul_add_c(a[4],b[3],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc c_3,t_2,c_3 != - addx c_1,%g0,c_1 - umul a_5,b_2,t_1 !mul_add_c(a[5],b[2],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - ld ap(7),a_7 - umul a_6,b_1,t_1 !=!mul_add_c(a[6],b[1],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 != - umul a_7,b_0,t_1 !mul_add_c(a[7],b[0],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc c_3,t_2,c_3 != - addx c_1,%g0,c_1 - st c_2,rp(7) !r[7]=c2; - - umul a_7,b_1,t_1 !mul_add_c(a[7],b[1],c3,c1,c2); - addcc c_3,t_1,c_3 != - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx %g0,%g0,c_2 - umul a_6,b_2,t_1 !=!mul_add_c(a[6],b[2],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 != - umul a_5,b_3,t_1 !mul_add_c(a[5],b[3],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 != - addx c_2,%g0,c_2 - umul a_4,b_4,t_1 !mul_add_c(a[4],b[4],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 != - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 - umul a_3,b_5,t_1 !mul_add_c(a[3],b[5],c3,c1,c2); - addcc c_3,t_1,c_3 != - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 - umul a_2,b_6,t_1 !=!mul_add_c(a[2],b[6],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 != - umul a_1,b_7,t_1 !mul_add_c(a[1],b[7],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 ! - addx c_2,%g0,c_2 - st c_3,rp(8) !r[8]=c3; - - umul a_2,b_7,t_1 !mul_add_c(a[2],b[7],c1,c2,c3); - addcc c_1,t_1,c_1 != - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx %g0,%g0,c_3 - umul a_3,b_6,t_1 !=!mul_add_c(a[3],b[6],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - umul a_4,b_5,t_1 !mul_add_c(a[4],b[5],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - addx c_3,%g0,c_3 - umul a_5,b_4,t_1 !mul_add_c(a[5],b[4],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 != - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 - umul a_6,b_3,t_1 !mul_add_c(a[6],b[3],c1,c2,c3); - addcc c_1,t_1,c_1 != - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 - umul a_7,b_2,t_1 !=!mul_add_c(a[7],b[2],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - st c_1,rp(9) !r[9]=c1; - - umul a_7,b_3,t_1 !mul_add_c(a[7],b[3],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx %g0,%g0,c_1 - umul a_6,b_4,t_1 !mul_add_c(a[6],b[4],c2,c3,c1); - addcc c_2,t_1,c_2 != - rd %y,t_2 - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - umul a_5,b_5,t_1 !=!mul_add_c(a[5],b[5],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 != - umul a_4,b_6,t_1 !mul_add_c(a[4],b[6],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc c_3,t_2,c_3 != - addx c_1,%g0,c_1 - umul a_3,b_7,t_1 !mul_add_c(a[3],b[7],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - st c_2,rp(10) !r[10]=c2; - - umul a_4,b_7,t_1 !=!mul_add_c(a[4],b[7],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx %g0,%g0,c_2 != - umul a_5,b_6,t_1 !mul_add_c(a[5],b[6],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 != - addx c_2,%g0,c_2 - umul a_6,b_5,t_1 !mul_add_c(a[6],b[5],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 != - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 - umul a_7,b_4,t_1 !mul_add_c(a[7],b[4],c3,c1,c2); - addcc c_3,t_1,c_3 != - rd %y,t_2 - addxcc c_1,t_2,c_1 - st c_3,rp(11) !r[11]=c3; - addx c_2,%g0,c_2 != - - umul a_7,b_5,t_1 !mul_add_c(a[7],b[5],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - addx %g0,%g0,c_3 - umul a_6,b_6,t_1 !mul_add_c(a[6],b[6],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 != - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 - umul a_5,b_7,t_1 !mul_add_c(a[5],b[7],c1,c2,c3); - addcc c_1,t_1,c_1 != - rd %y,t_2 - addxcc c_2,t_2,c_2 - st c_1,rp(12) !r[12]=c1; - addx c_3,%g0,c_3 != - - umul a_6,b_7,t_1 !mul_add_c(a[6],b[7],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc c_3,t_2,c_3 != - addx %g0,%g0,c_1 - umul a_7,b_6,t_1 !mul_add_c(a[7],b[6],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - st c_2,rp(13) !r[13]=c2; - - umul a_7,b_7,t_1 !=!mul_add_c(a[7],b[7],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 - nop != - st c_3,rp(14) !r[14]=c3; - st c_1,rp(15) !r[15]=c1; - - ret - restore %g0,%g0,%o0 - -.type bn_mul_comba8,#function -.size bn_mul_comba8,(.-bn_mul_comba8) - -.align 32 - -.global bn_mul_comba4 -/* - * void bn_mul_comba4(r,a,b) - * BN_ULONG *r,*a,*b; - */ -bn_mul_comba4: - save %sp,FRAME_SIZE,%sp - ld ap(0),a_0 - ld bp(0),b_0 - umul a_0,b_0,c_1 !=!mul_add_c(a[0],b[0],c1,c2,c3); - ld bp(1),b_1 - rd %y,c_2 - st c_1,rp(0) !r[0]=c1; - - umul a_0,b_1,t_1 !=!mul_add_c(a[0],b[1],c2,c3,c1); - ld ap(1),a_1 - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc %g0,t_2,c_3 - addx %g0,%g0,c_1 - ld ap(2),a_2 - umul a_1,b_0,t_1 !=!mul_add_c(a[1],b[0],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 != - st c_2,rp(1) !r[1]=c2; - - umul a_2,b_0,t_1 !mul_add_c(a[2],b[0],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 != - addxcc c_1,t_2,c_1 - addx %g0,%g0,c_2 - ld bp(2),b_2 - umul a_1,b_1,t_1 !=!mul_add_c(a[1],b[1],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 != - ld bp(3),b_3 - umul a_0,b_2,t_1 !mul_add_c(a[0],b[2],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 != - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 - st c_3,rp(2) !r[2]=c3; - - umul a_0,b_3,t_1 !=!mul_add_c(a[0],b[3],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx %g0,%g0,c_3 != - umul a_1,b_2,t_1 !mul_add_c(a[1],b[2],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - addx c_3,%g0,c_3 - ld ap(3),a_3 - umul a_2,b_1,t_1 !mul_add_c(a[2],b[1],c1,c2,c3); - addcc c_1,t_1,c_1 != - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 - umul a_3,b_0,t_1 !=!mul_add_c(a[3],b[0],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - st c_1,rp(3) !r[3]=c1; - - umul a_3,b_1,t_1 !mul_add_c(a[3],b[1],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx %g0,%g0,c_1 - umul a_2,b_2,t_1 !mul_add_c(a[2],b[2],c2,c3,c1); - addcc c_2,t_1,c_2 != - rd %y,t_2 - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - umul a_1,b_3,t_1 !=!mul_add_c(a[1],b[3],c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 != - st c_2,rp(4) !r[4]=c2; - - umul a_2,b_3,t_1 !mul_add_c(a[2],b[3],c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 != - addxcc c_1,t_2,c_1 - addx %g0,%g0,c_2 - umul a_3,b_2,t_1 !mul_add_c(a[3],b[2],c3,c1,c2); - addcc c_3,t_1,c_3 != - rd %y,t_2 - addxcc c_1,t_2,c_1 - st c_3,rp(5) !r[5]=c3; - addx c_2,%g0,c_2 != - - umul a_3,b_3,t_1 !mul_add_c(a[3],b[3],c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - st c_1,rp(6) !r[6]=c1; - st c_2,rp(7) !r[7]=c2; - - ret - restore %g0,%g0,%o0 - -.type bn_mul_comba4,#function -.size bn_mul_comba4,(.-bn_mul_comba4) - -.align 32 - -.global bn_sqr_comba8 -bn_sqr_comba8: - save %sp,FRAME_SIZE,%sp - ld ap(0),a_0 - ld ap(1),a_1 - umul a_0,a_0,c_1 !=!sqr_add_c(a,0,c1,c2,c3); - rd %y,c_2 - st c_1,rp(0) !r[0]=c1; - - ld ap(2),a_2 - umul a_0,a_1,t_1 !=!sqr_add_c2(a,1,0,c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc %g0,t_2,c_3 - addx %g0,%g0,c_1 != - addcc c_2,t_1,c_2 - addxcc c_3,t_2,c_3 - st c_2,rp(1) !r[1]=c2; - addx c_1,%g0,c_1 != - - umul a_2,a_0,t_1 !sqr_add_c2(a,2,0,c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 != - addx %g0,%g0,c_2 - addcc c_3,t_1,c_3 - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 != - ld ap(3),a_3 - umul a_1,a_1,t_1 !sqr_add_c(a,1,c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 != - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 - st c_3,rp(2) !r[2]=c3; - - umul a_0,a_3,t_1 !=!sqr_add_c2(a,3,0,c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx %g0,%g0,c_3 != - addcc c_1,t_1,c_1 - addxcc c_2,t_2,c_2 - ld ap(4),a_4 - addx c_3,%g0,c_3 != - umul a_1,a_2,t_1 !sqr_add_c2(a,2,1,c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - addx c_3,%g0,c_3 - addcc c_1,t_1,c_1 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - st c_1,rp(3) !r[3]=c1; - - umul a_4,a_0,t_1 !sqr_add_c2(a,4,0,c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx %g0,%g0,c_1 - addcc c_2,t_1,c_2 - addxcc c_3,t_2,c_3 != - addx c_1,%g0,c_1 - umul a_3,a_1,t_1 !sqr_add_c2(a,3,1,c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - addcc c_2,t_1,c_2 - addxcc c_3,t_2,c_3 != - addx c_1,%g0,c_1 - ld ap(5),a_5 - umul a_2,a_2,t_1 !sqr_add_c(a,2,c2,c3,c1); - addcc c_2,t_1,c_2 != - rd %y,t_2 - addxcc c_3,t_2,c_3 - st c_2,rp(4) !r[4]=c2; - addx c_1,%g0,c_1 != - - umul a_0,a_5,t_1 !sqr_add_c2(a,5,0,c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 != - addx %g0,%g0,c_2 - addcc c_3,t_1,c_3 - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 != - umul a_1,a_4,t_1 !sqr_add_c2(a,4,1,c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 != - addx c_2,%g0,c_2 - addcc c_3,t_1,c_3 - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 != - ld ap(6),a_6 - umul a_2,a_3,t_1 !sqr_add_c2(a,3,2,c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 != - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 - addcc c_3,t_1,c_3 - addxcc c_1,t_2,c_1 != - addx c_2,%g0,c_2 - st c_3,rp(5) !r[5]=c3; - - umul a_6,a_0,t_1 !sqr_add_c2(a,6,0,c1,c2,c3); - addcc c_1,t_1,c_1 != - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx %g0,%g0,c_3 - addcc c_1,t_1,c_1 != - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 - umul a_5,a_1,t_1 !sqr_add_c2(a,5,1,c1,c2,c3); - addcc c_1,t_1,c_1 != - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 - addcc c_1,t_1,c_1 != - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 - umul a_4,a_2,t_1 !sqr_add_c2(a,4,2,c1,c2,c3); - addcc c_1,t_1,c_1 != - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 - addcc c_1,t_1,c_1 != - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 - ld ap(7),a_7 - umul a_3,a_3,t_1 !=!sqr_add_c(a,3,c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - st c_1,rp(6) !r[6]=c1; - - umul a_0,a_7,t_1 !sqr_add_c2(a,7,0,c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx %g0,%g0,c_1 - addcc c_2,t_1,c_2 - addxcc c_3,t_2,c_3 != - addx c_1,%g0,c_1 - umul a_1,a_6,t_1 !sqr_add_c2(a,6,1,c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - addcc c_2,t_1,c_2 - addxcc c_3,t_2,c_3 != - addx c_1,%g0,c_1 - umul a_2,a_5,t_1 !sqr_add_c2(a,5,2,c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - addcc c_2,t_1,c_2 - addxcc c_3,t_2,c_3 != - addx c_1,%g0,c_1 - umul a_3,a_4,t_1 !sqr_add_c2(a,4,3,c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - addcc c_2,t_1,c_2 - addxcc c_3,t_2,c_3 != - addx c_1,%g0,c_1 - st c_2,rp(7) !r[7]=c2; - - umul a_7,a_1,t_1 !sqr_add_c2(a,7,1,c3,c1,c2); - addcc c_3,t_1,c_3 != - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx %g0,%g0,c_2 - addcc c_3,t_1,c_3 != - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 - umul a_6,a_2,t_1 !sqr_add_c2(a,6,2,c3,c1,c2); - addcc c_3,t_1,c_3 != - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 - addcc c_3,t_1,c_3 != - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 - umul a_5,a_3,t_1 !sqr_add_c2(a,5,3,c3,c1,c2); - addcc c_3,t_1,c_3 != - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 - addcc c_3,t_1,c_3 != - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 - umul a_4,a_4,t_1 !sqr_add_c(a,4,c3,c1,c2); - addcc c_3,t_1,c_3 != - rd %y,t_2 - addxcc c_1,t_2,c_1 - st c_3,rp(8) !r[8]=c3; - addx c_2,%g0,c_2 != - - umul a_2,a_7,t_1 !sqr_add_c2(a,7,2,c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - addx %g0,%g0,c_3 - addcc c_1,t_1,c_1 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - umul a_3,a_6,t_1 !sqr_add_c2(a,6,3,c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - addx c_3,%g0,c_3 - addcc c_1,t_1,c_1 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - umul a_4,a_5,t_1 !sqr_add_c2(a,5,4,c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - addx c_3,%g0,c_3 - addcc c_1,t_1,c_1 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - st c_1,rp(9) !r[9]=c1; - - umul a_7,a_3,t_1 !sqr_add_c2(a,7,3,c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx %g0,%g0,c_1 - addcc c_2,t_1,c_2 - addxcc c_3,t_2,c_3 != - addx c_1,%g0,c_1 - umul a_6,a_4,t_1 !sqr_add_c2(a,6,4,c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - addcc c_2,t_1,c_2 - addxcc c_3,t_2,c_3 != - addx c_1,%g0,c_1 - umul a_5,a_5,t_1 !sqr_add_c(a,5,c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - st c_2,rp(10) !r[10]=c2; - - umul a_4,a_7,t_1 !=!sqr_add_c2(a,7,4,c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx %g0,%g0,c_2 != - addcc c_3,t_1,c_3 - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 - umul a_5,a_6,t_1 !=!sqr_add_c2(a,6,5,c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx c_2,%g0,c_2 != - addcc c_3,t_1,c_3 - addxcc c_1,t_2,c_1 - st c_3,rp(11) !r[11]=c3; - addx c_2,%g0,c_2 != - - umul a_7,a_5,t_1 !sqr_add_c2(a,7,5,c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - addx %g0,%g0,c_3 - addcc c_1,t_1,c_1 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - umul a_6,a_6,t_1 !sqr_add_c(a,6,c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - addx c_3,%g0,c_3 - st c_1,rp(12) !r[12]=c1; - - umul a_6,a_7,t_1 !sqr_add_c2(a,7,6,c2,c3,c1); - addcc c_2,t_1,c_2 != - rd %y,t_2 - addxcc c_3,t_2,c_3 - addx %g0,%g0,c_1 - addcc c_2,t_1,c_2 != - addxcc c_3,t_2,c_3 - st c_2,rp(13) !r[13]=c2; - addx c_1,%g0,c_1 != - - umul a_7,a_7,t_1 !sqr_add_c(a,7,c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 != - st c_3,rp(14) !r[14]=c3; - st c_1,rp(15) !r[15]=c1; - - ret - restore %g0,%g0,%o0 - -.type bn_sqr_comba8,#function -.size bn_sqr_comba8,(.-bn_sqr_comba8) - -.align 32 - -.global bn_sqr_comba4 -/* - * void bn_sqr_comba4(r,a) - * BN_ULONG *r,*a; - */ -bn_sqr_comba4: - save %sp,FRAME_SIZE,%sp - ld ap(0),a_0 - umul a_0,a_0,c_1 !sqr_add_c(a,0,c1,c2,c3); - ld ap(1),a_1 != - rd %y,c_2 - st c_1,rp(0) !r[0]=c1; - - ld ap(2),a_2 - umul a_0,a_1,t_1 !=!sqr_add_c2(a,1,0,c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 - addxcc %g0,t_2,c_3 - addx %g0,%g0,c_1 != - addcc c_2,t_1,c_2 - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 != - st c_2,rp(1) !r[1]=c2; - - umul a_2,a_0,t_1 !sqr_add_c2(a,2,0,c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 != - addxcc c_1,t_2,c_1 - addx %g0,%g0,c_2 - addcc c_3,t_1,c_3 - addxcc c_1,t_2,c_1 != - addx c_2,%g0,c_2 - ld ap(3),a_3 - umul a_1,a_1,t_1 !sqr_add_c(a,1,c3,c1,c2); - addcc c_3,t_1,c_3 != - rd %y,t_2 - addxcc c_1,t_2,c_1 - st c_3,rp(2) !r[2]=c3; - addx c_2,%g0,c_2 != - - umul a_0,a_3,t_1 !sqr_add_c2(a,3,0,c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - addx %g0,%g0,c_3 - addcc c_1,t_1,c_1 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - umul a_1,a_2,t_1 !sqr_add_c2(a,2,1,c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - addx c_3,%g0,c_3 - addcc c_1,t_1,c_1 - addxcc c_2,t_2,c_2 - addx c_3,%g0,c_3 != - st c_1,rp(3) !r[3]=c1; - - umul a_3,a_1,t_1 !sqr_add_c2(a,3,1,c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx %g0,%g0,c_1 - addcc c_2,t_1,c_2 - addxcc c_3,t_2,c_3 != - addx c_1,%g0,c_1 - umul a_2,a_2,t_1 !sqr_add_c(a,2,c2,c3,c1); - addcc c_2,t_1,c_2 - rd %y,t_2 != - addxcc c_3,t_2,c_3 - addx c_1,%g0,c_1 - st c_2,rp(4) !r[4]=c2; - - umul a_2,a_3,t_1 !=!sqr_add_c2(a,3,2,c3,c1,c2); - addcc c_3,t_1,c_3 - rd %y,t_2 - addxcc c_1,t_2,c_1 - addx %g0,%g0,c_2 != - addcc c_3,t_1,c_3 - addxcc c_1,t_2,c_1 - st c_3,rp(5) !r[5]=c3; - addx c_2,%g0,c_2 != - - umul a_3,a_3,t_1 !sqr_add_c(a,3,c1,c2,c3); - addcc c_1,t_1,c_1 - rd %y,t_2 - addxcc c_2,t_2,c_2 != - st c_1,rp(6) !r[6]=c1; - st c_2,rp(7) !r[7]=c2; - - ret - restore %g0,%g0,%o0 - -.type bn_sqr_comba4,#function -.size bn_sqr_comba4,(.-bn_sqr_comba4) - -.align 32 diff --git a/app/openssl/crypto/bn/asm/sparcv8plus.S b/app/openssl/crypto/bn/asm/sparcv8plus.S deleted file mode 100644 index 63de1860..00000000 --- a/app/openssl/crypto/bn/asm/sparcv8plus.S +++ /dev/null @@ -1,1558 +0,0 @@ -.ident "sparcv8plus.s, Version 1.4" -.ident "SPARC v9 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>" - -/* - * ==================================================================== - * Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL - * project. - * - * Rights for redistribution and usage in source and binary forms are - * granted according to the OpenSSL license. Warranty of any kind is - * disclaimed. - * ==================================================================== - */ - -/* - * This is my modest contributon to OpenSSL project (see - * http://www.openssl.org/ for more information about it) and is - * a drop-in UltraSPARC ISA replacement for crypto/bn/bn_asm.c - * module. For updates see http://fy.chalmers.se/~appro/hpe/. - * - * Questions-n-answers. - * - * Q. How to compile? - * A. With SC4.x/SC5.x: - * - * cc -xarch=v8plus -c bn_asm.sparc.v8plus.S -o bn_asm.o - * - * and with gcc: - * - * gcc -mcpu=ultrasparc -c bn_asm.sparc.v8plus.S -o bn_asm.o - * - * or if above fails (it does if you have gas installed): - * - * gcc -E bn_asm.sparc.v8plus.S | as -xarch=v8plus /dev/fd/0 -o bn_asm.o - * - * Quick-n-dirty way to fuse the module into the library. - * Provided that the library is already configured and built - * (in 0.9.2 case with no-asm option): - * - * # cd crypto/bn - * # cp /some/place/bn_asm.sparc.v8plus.S . - * # cc -xarch=v8plus -c bn_asm.sparc.v8plus.S -o bn_asm.o - * # make - * # cd ../.. - * # make; make test - * - * Quick-n-dirty way to get rid of it: - * - * # cd crypto/bn - * # touch bn_asm.c - * # make - * # cd ../.. - * # make; make test - * - * Q. V8plus achitecture? What kind of beast is that? - * A. Well, it's rather a programming model than an architecture... - * It's actually v9-compliant, i.e. *any* UltraSPARC, CPU under - * special conditions, namely when kernel doesn't preserve upper - * 32 bits of otherwise 64-bit registers during a context switch. - * - * Q. Why just UltraSPARC? What about SuperSPARC? - * A. Original release did target UltraSPARC only. Now SuperSPARC - * version is provided along. Both version share bn_*comba[48] - * implementations (see comment later in code for explanation). - * But what's so special about this UltraSPARC implementation? - * Why didn't I let compiler do the job? Trouble is that most of - * available compilers (well, SC5.0 is the only exception) don't - * attempt to take advantage of UltraSPARC's 64-bitness under - * 32-bit kernels even though it's perfectly possible (see next - * question). - * - * Q. 64-bit registers under 32-bit kernels? Didn't you just say it - * doesn't work? - * A. You can't adress *all* registers as 64-bit wide:-( The catch is - * that you actually may rely upon %o0-%o5 and %g1-%g4 being fully - * preserved if you're in a leaf function, i.e. such never calling - * any other functions. All functions in this module are leaf and - * 10 registers is a handful. And as a matter of fact none-"comba" - * routines don't require even that much and I could even afford to - * not allocate own stack frame for 'em:-) - * - * Q. What about 64-bit kernels? - * A. What about 'em? Just kidding:-) Pure 64-bit version is currently - * under evaluation and development... - * - * Q. What about shared libraries? - * A. What about 'em? Kidding again:-) Code does *not* contain any - * code position dependencies and it's safe to include it into - * shared library as is. - * - * Q. How much faster does it go? - * A. Do you have a good benchmark? In either case below is what I - * experience with crypto/bn/expspeed.c test program: - * - * v8plus module on U10/300MHz against bn_asm.c compiled with: - * - * cc-5.0 -xarch=v8plus -xO5 -xdepend +7-12% - * cc-4.2 -xarch=v8plus -xO5 -xdepend +25-35% - * egcs-1.1.2 -mcpu=ultrasparc -O3 +35-45% - * - * v8 module on SS10/60MHz against bn_asm.c compiled with: - * - * cc-5.0 -xarch=v8 -xO5 -xdepend +7-10% - * cc-4.2 -xarch=v8 -xO5 -xdepend +10% - * egcs-1.1.2 -mv8 -O3 +35-45% - * - * As you can see it's damn hard to beat the new Sun C compiler - * and it's in first place GNU C users who will appreciate this - * assembler implementation:-) - */ - -/* - * Revision history. - * - * 1.0 - initial release; - * 1.1 - new loop unrolling model(*); - * - some more fine tuning; - * 1.2 - made gas friendly; - * - updates to documentation concerning v9; - * - new performance comparison matrix; - * 1.3 - fixed problem with /usr/ccs/lib/cpp; - * 1.4 - native V9 bn_*_comba[48] implementation (15% more efficient) - * resulting in slight overall performance kick; - * - some retunes; - * - support for GNU as added; - * - * (*) Originally unrolled loop looked like this: - * for (;;) { - * op(p+0); if (--n==0) break; - * op(p+1); if (--n==0) break; - * op(p+2); if (--n==0) break; - * op(p+3); if (--n==0) break; - * p+=4; - * } - * I unroll according to following: - * while (n&~3) { - * op(p+0); op(p+1); op(p+2); op(p+3); - * p+=4; n=-4; - * } - * if (n) { - * op(p+0); if (--n==0) return; - * op(p+2); if (--n==0) return; - * op(p+3); return; - * } - */ - -#if defined(__SUNPRO_C) && defined(__sparcv9) - /* They've said -xarch=v9 at command line */ - .register %g2,#scratch - .register %g3,#scratch -# define FRAME_SIZE -192 -#elif defined(__GNUC__) && defined(__arch64__) - /* They've said -m64 at command line */ - .register %g2,#scratch - .register %g3,#scratch -# define FRAME_SIZE -192 -#else -# define FRAME_SIZE -96 -#endif -/* - * GNU assembler can't stand stuw:-( - */ -#define stuw st - -.section ".text",#alloc,#execinstr -.file "bn_asm.sparc.v8plus.S" - -.align 32 - -.global bn_mul_add_words -/* - * BN_ULONG bn_mul_add_words(rp,ap,num,w) - * BN_ULONG *rp,*ap; - * int num; - * BN_ULONG w; - */ -bn_mul_add_words: - sra %o2,%g0,%o2 ! signx %o2 - brgz,a %o2,.L_bn_mul_add_words_proceed - lduw [%o1],%g2 - retl - clr %o0 - nop - nop - nop - -.L_bn_mul_add_words_proceed: - srl %o3,%g0,%o3 ! clruw %o3 - andcc %o2,-4,%g0 - bz,pn %icc,.L_bn_mul_add_words_tail - clr %o5 - -.L_bn_mul_add_words_loop: ! wow! 32 aligned! - lduw [%o0],%g1 - lduw [%o1+4],%g3 - mulx %o3,%g2,%g2 - add %g1,%o5,%o4 - nop - add %o4,%g2,%o4 - stuw %o4,[%o0] - srlx %o4,32,%o5 - - lduw [%o0+4],%g1 - lduw [%o1+8],%g2 - mulx %o3,%g3,%g3 - add %g1,%o5,%o4 - dec 4,%o2 - add %o4,%g3,%o4 - stuw %o4,[%o0+4] - srlx %o4,32,%o5 - - lduw [%o0+8],%g1 - lduw [%o1+12],%g3 - mulx %o3,%g2,%g2 - add %g1,%o5,%o4 - inc 16,%o1 - add %o4,%g2,%o4 - stuw %o4,[%o0+8] - srlx %o4,32,%o5 - - lduw [%o0+12],%g1 - mulx %o3,%g3,%g3 - add %g1,%o5,%o4 - inc 16,%o0 - add %o4,%g3,%o4 - andcc %o2,-4,%g0 - stuw %o4,[%o0-4] - srlx %o4,32,%o5 - bnz,a,pt %icc,.L_bn_mul_add_words_loop - lduw [%o1],%g2 - - brnz,a,pn %o2,.L_bn_mul_add_words_tail - lduw [%o1],%g2 -.L_bn_mul_add_words_return: - retl - mov %o5,%o0 - -.L_bn_mul_add_words_tail: - lduw [%o0],%g1 - mulx %o3,%g2,%g2 - add %g1,%o5,%o4 - dec %o2 - add %o4,%g2,%o4 - srlx %o4,32,%o5 - brz,pt %o2,.L_bn_mul_add_words_return - stuw %o4,[%o0] - - lduw [%o1+4],%g2 - lduw [%o0+4],%g1 - mulx %o3,%g2,%g2 - add %g1,%o5,%o4 - dec %o2 - add %o4,%g2,%o4 - srlx %o4,32,%o5 - brz,pt %o2,.L_bn_mul_add_words_return - stuw %o4,[%o0+4] - - lduw [%o1+8],%g2 - lduw [%o0+8],%g1 - mulx %o3,%g2,%g2 - add %g1,%o5,%o4 - add %o4,%g2,%o4 - stuw %o4,[%o0+8] - retl - srlx %o4,32,%o0 - -.type bn_mul_add_words,#function -.size bn_mul_add_words,(.-bn_mul_add_words) - -.align 32 - -.global bn_mul_words -/* - * BN_ULONG bn_mul_words(rp,ap,num,w) - * BN_ULONG *rp,*ap; - * int num; - * BN_ULONG w; - */ -bn_mul_words: - sra %o2,%g0,%o2 ! signx %o2 - brgz,a %o2,.L_bn_mul_words_proceeed - lduw [%o1],%g2 - retl - clr %o0 - nop - nop - nop - -.L_bn_mul_words_proceeed: - srl %o3,%g0,%o3 ! clruw %o3 - andcc %o2,-4,%g0 - bz,pn %icc,.L_bn_mul_words_tail - clr %o5 - -.L_bn_mul_words_loop: ! wow! 32 aligned! - lduw [%o1+4],%g3 - mulx %o3,%g2,%g2 - add %g2,%o5,%o4 - nop - stuw %o4,[%o0] - srlx %o4,32,%o5 - - lduw [%o1+8],%g2 - mulx %o3,%g3,%g3 - add %g3,%o5,%o4 - dec 4,%o2 - stuw %o4,[%o0+4] - srlx %o4,32,%o5 - - lduw [%o1+12],%g3 - mulx %o3,%g2,%g2 - add %g2,%o5,%o4 - inc 16,%o1 - stuw %o4,[%o0+8] - srlx %o4,32,%o5 - - mulx %o3,%g3,%g3 - add %g3,%o5,%o4 - inc 16,%o0 - stuw %o4,[%o0-4] - srlx %o4,32,%o5 - andcc %o2,-4,%g0 - bnz,a,pt %icc,.L_bn_mul_words_loop - lduw [%o1],%g2 - nop - nop - - brnz,a,pn %o2,.L_bn_mul_words_tail - lduw [%o1],%g2 -.L_bn_mul_words_return: - retl - mov %o5,%o0 - -.L_bn_mul_words_tail: - mulx %o3,%g2,%g2 - add %g2,%o5,%o4 - dec %o2 - srlx %o4,32,%o5 - brz,pt %o2,.L_bn_mul_words_return - stuw %o4,[%o0] - - lduw [%o1+4],%g2 - mulx %o3,%g2,%g2 - add %g2,%o5,%o4 - dec %o2 - srlx %o4,32,%o5 - brz,pt %o2,.L_bn_mul_words_return - stuw %o4,[%o0+4] - - lduw [%o1+8],%g2 - mulx %o3,%g2,%g2 - add %g2,%o5,%o4 - stuw %o4,[%o0+8] - retl - srlx %o4,32,%o0 - -.type bn_mul_words,#function -.size bn_mul_words,(.-bn_mul_words) - -.align 32 -.global bn_sqr_words -/* - * void bn_sqr_words(r,a,n) - * BN_ULONG *r,*a; - * int n; - */ -bn_sqr_words: - sra %o2,%g0,%o2 ! signx %o2 - brgz,a %o2,.L_bn_sqr_words_proceeed - lduw [%o1],%g2 - retl - clr %o0 - nop - nop - nop - -.L_bn_sqr_words_proceeed: - andcc %o2,-4,%g0 - nop - bz,pn %icc,.L_bn_sqr_words_tail - nop - -.L_bn_sqr_words_loop: ! wow! 32 aligned! - lduw [%o1+4],%g3 - mulx %g2,%g2,%o4 - stuw %o4,[%o0] - srlx %o4,32,%o5 - stuw %o5,[%o0+4] - nop - - lduw [%o1+8],%g2 - mulx %g3,%g3,%o4 - dec 4,%o2 - stuw %o4,[%o0+8] - srlx %o4,32,%o5 - stuw %o5,[%o0+12] - - lduw [%o1+12],%g3 - mulx %g2,%g2,%o4 - srlx %o4,32,%o5 - stuw %o4,[%o0+16] - inc 16,%o1 - stuw %o5,[%o0+20] - - mulx %g3,%g3,%o4 - inc 32,%o0 - stuw %o4,[%o0-8] - srlx %o4,32,%o5 - andcc %o2,-4,%g2 - stuw %o5,[%o0-4] - bnz,a,pt %icc,.L_bn_sqr_words_loop - lduw [%o1],%g2 - nop - - brnz,a,pn %o2,.L_bn_sqr_words_tail - lduw [%o1],%g2 -.L_bn_sqr_words_return: - retl - clr %o0 - -.L_bn_sqr_words_tail: - mulx %g2,%g2,%o4 - dec %o2 - stuw %o4,[%o0] - srlx %o4,32,%o5 - brz,pt %o2,.L_bn_sqr_words_return - stuw %o5,[%o0+4] - - lduw [%o1+4],%g2 - mulx %g2,%g2,%o4 - dec %o2 - stuw %o4,[%o0+8] - srlx %o4,32,%o5 - brz,pt %o2,.L_bn_sqr_words_return - stuw %o5,[%o0+12] - - lduw [%o1+8],%g2 - mulx %g2,%g2,%o4 - srlx %o4,32,%o5 - stuw %o4,[%o0+16] - stuw %o5,[%o0+20] - retl - clr %o0 - -.type bn_sqr_words,#function -.size bn_sqr_words,(.-bn_sqr_words) - -.align 32 -.global bn_div_words -/* - * BN_ULONG bn_div_words(h,l,d) - * BN_ULONG h,l,d; - */ -bn_div_words: - sllx %o0,32,%o0 - or %o0,%o1,%o0 - udivx %o0,%o2,%o0 - retl - srl %o0,%g0,%o0 ! clruw %o0 - -.type bn_div_words,#function -.size bn_div_words,(.-bn_div_words) - -.align 32 - -.global bn_add_words -/* - * BN_ULONG bn_add_words(rp,ap,bp,n) - * BN_ULONG *rp,*ap,*bp; - * int n; - */ -bn_add_words: - sra %o3,%g0,%o3 ! signx %o3 - brgz,a %o3,.L_bn_add_words_proceed - lduw [%o1],%o4 - retl - clr %o0 - -.L_bn_add_words_proceed: - andcc %o3,-4,%g0 - bz,pn %icc,.L_bn_add_words_tail - addcc %g0,0,%g0 ! clear carry flag - -.L_bn_add_words_loop: ! wow! 32 aligned! - dec 4,%o3 - lduw [%o2],%o5 - lduw [%o1+4],%g1 - lduw [%o2+4],%g2 - lduw [%o1+8],%g3 - lduw [%o2+8],%g4 - addccc %o5,%o4,%o5 - stuw %o5,[%o0] - - lduw [%o1+12],%o4 - lduw [%o2+12],%o5 - inc 16,%o1 - addccc %g1,%g2,%g1 - stuw %g1,[%o0+4] - - inc 16,%o2 - addccc %g3,%g4,%g3 - stuw %g3,[%o0+8] - - inc 16,%o0 - addccc %o5,%o4,%o5 - stuw %o5,[%o0-4] - and %o3,-4,%g1 - brnz,a,pt %g1,.L_bn_add_words_loop - lduw [%o1],%o4 - - brnz,a,pn %o3,.L_bn_add_words_tail - lduw [%o1],%o4 -.L_bn_add_words_return: - clr %o0 - retl - movcs %icc,1,%o0 - nop - -.L_bn_add_words_tail: - lduw [%o2],%o5 - dec %o3 - addccc %o5,%o4,%o5 - brz,pt %o3,.L_bn_add_words_return - stuw %o5,[%o0] - - lduw [%o1+4],%o4 - lduw [%o2+4],%o5 - dec %o3 - addccc %o5,%o4,%o5 - brz,pt %o3,.L_bn_add_words_return - stuw %o5,[%o0+4] - - lduw [%o1+8],%o4 - lduw [%o2+8],%o5 - addccc %o5,%o4,%o5 - stuw %o5,[%o0+8] - clr %o0 - retl - movcs %icc,1,%o0 - -.type bn_add_words,#function -.size bn_add_words,(.-bn_add_words) - -.global bn_sub_words -/* - * BN_ULONG bn_sub_words(rp,ap,bp,n) - * BN_ULONG *rp,*ap,*bp; - * int n; - */ -bn_sub_words: - sra %o3,%g0,%o3 ! signx %o3 - brgz,a %o3,.L_bn_sub_words_proceed - lduw [%o1],%o4 - retl - clr %o0 - -.L_bn_sub_words_proceed: - andcc %o3,-4,%g0 - bz,pn %icc,.L_bn_sub_words_tail - addcc %g0,0,%g0 ! clear carry flag - -.L_bn_sub_words_loop: ! wow! 32 aligned! - dec 4,%o3 - lduw [%o2],%o5 - lduw [%o1+4],%g1 - lduw [%o2+4],%g2 - lduw [%o1+8],%g3 - lduw [%o2+8],%g4 - subccc %o4,%o5,%o5 - stuw %o5,[%o0] - - lduw [%o1+12],%o4 - lduw [%o2+12],%o5 - inc 16,%o1 - subccc %g1,%g2,%g2 - stuw %g2,[%o0+4] - - inc 16,%o2 - subccc %g3,%g4,%g4 - stuw %g4,[%o0+8] - - inc 16,%o0 - subccc %o4,%o5,%o5 - stuw %o5,[%o0-4] - and %o3,-4,%g1 - brnz,a,pt %g1,.L_bn_sub_words_loop - lduw [%o1],%o4 - - brnz,a,pn %o3,.L_bn_sub_words_tail - lduw [%o1],%o4 -.L_bn_sub_words_return: - clr %o0 - retl - movcs %icc,1,%o0 - nop - -.L_bn_sub_words_tail: ! wow! 32 aligned! - lduw [%o2],%o5 - dec %o3 - subccc %o4,%o5,%o5 - brz,pt %o3,.L_bn_sub_words_return - stuw %o5,[%o0] - - lduw [%o1+4],%o4 - lduw [%o2+4],%o5 - dec %o3 - subccc %o4,%o5,%o5 - brz,pt %o3,.L_bn_sub_words_return - stuw %o5,[%o0+4] - - lduw [%o1+8],%o4 - lduw [%o2+8],%o5 - subccc %o4,%o5,%o5 - stuw %o5,[%o0+8] - clr %o0 - retl - movcs %icc,1,%o0 - -.type bn_sub_words,#function -.size bn_sub_words,(.-bn_sub_words) - -/* - * Code below depends on the fact that upper parts of the %l0-%l7 - * and %i0-%i7 are zeroed by kernel after context switch. In - * previous versions this comment stated that "the trouble is that - * it's not feasible to implement the mumbo-jumbo in less V9 - * instructions:-(" which apparently isn't true thanks to - * 'bcs,a %xcc,.+8; inc %rd' pair. But the performance improvement - * results not from the shorter code, but from elimination of - * multicycle none-pairable 'rd %y,%rd' instructions. - * - * Andy. - */ - -/* - * Here is register usage map for *all* routines below. - */ -#define t_1 %o0 -#define t_2 %o1 -#define c_12 %o2 -#define c_3 %o3 - -#define ap(I) [%i1+4*I] -#define bp(I) [%i2+4*I] -#define rp(I) [%i0+4*I] - -#define a_0 %l0 -#define a_1 %l1 -#define a_2 %l2 -#define a_3 %l3 -#define a_4 %l4 -#define a_5 %l5 -#define a_6 %l6 -#define a_7 %l7 - -#define b_0 %i3 -#define b_1 %i4 -#define b_2 %i5 -#define b_3 %o4 -#define b_4 %o5 -#define b_5 %o7 -#define b_6 %g1 -#define b_7 %g4 - -.align 32 -.global bn_mul_comba8 -/* - * void bn_mul_comba8(r,a,b) - * BN_ULONG *r,*a,*b; - */ -bn_mul_comba8: - save %sp,FRAME_SIZE,%sp - mov 1,t_2 - lduw ap(0),a_0 - sllx t_2,32,t_2 - lduw bp(0),b_0 != - lduw bp(1),b_1 - mulx a_0,b_0,t_1 !mul_add_c(a[0],b[0],c1,c2,c3); - srlx t_1,32,c_12 - stuw t_1,rp(0) !=!r[0]=c1; - - lduw ap(1),a_1 - mulx a_0,b_1,t_1 !mul_add_c(a[0],b[1],c2,c3,c1); - addcc c_12,t_1,c_12 - clr c_3 != - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw ap(2),a_2 - mulx a_1,b_0,t_1 !=!mul_add_c(a[1],b[0],c2,c3,c1); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 != - stuw t_1,rp(1) !r[1]=c2; - or c_12,c_3,c_12 - - mulx a_2,b_0,t_1 !mul_add_c(a[2],b[0],c3,c1,c2); - addcc c_12,t_1,c_12 != - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw bp(2),b_2 != - mulx a_1,b_1,t_1 !mul_add_c(a[1],b[1],c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 != - lduw bp(3),b_3 - mulx a_0,b_2,t_1 !mul_add_c(a[0],b[2],c3,c1,c2); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(2) !r[2]=c3; - or c_12,c_3,c_12 != - - mulx a_0,b_3,t_1 !mul_add_c(a[0],b[3],c1,c2,c3); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_1,b_2,t_1 !=!mul_add_c(a[1],b[2],c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - lduw ap(3),a_3 - mulx a_2,b_1,t_1 !mul_add_c(a[2],b[1],c1,c2,c3); - addcc c_12,t_1,c_12 != - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw ap(4),a_4 - mulx a_3,b_0,t_1 !=!mul_add_c(a[3],b[0],c1,c2,c3);!= - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 != - stuw t_1,rp(3) !r[3]=c1; - or c_12,c_3,c_12 - - mulx a_4,b_0,t_1 !mul_add_c(a[4],b[0],c2,c3,c1); - addcc c_12,t_1,c_12 != - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_3,b_1,t_1 !=!mul_add_c(a[3],b[1],c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_2,b_2,t_1 !=!mul_add_c(a[2],b[2],c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw bp(4),b_4 != - mulx a_1,b_3,t_1 !mul_add_c(a[1],b[3],c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 != - lduw bp(5),b_5 - mulx a_0,b_4,t_1 !mul_add_c(a[0],b[4],c2,c3,c1); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(4) !r[4]=c2; - or c_12,c_3,c_12 != - - mulx a_0,b_5,t_1 !mul_add_c(a[0],b[5],c3,c1,c2); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_1,b_4,t_1 !mul_add_c(a[1],b[4],c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_2,b_3,t_1 !mul_add_c(a[2],b[3],c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_3,b_2,t_1 !mul_add_c(a[3],b[2],c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - lduw ap(5),a_5 - mulx a_4,b_1,t_1 !mul_add_c(a[4],b[1],c3,c1,c2); - addcc c_12,t_1,c_12 != - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw ap(6),a_6 - mulx a_5,b_0,t_1 !=!mul_add_c(a[5],b[0],c3,c1,c2); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 != - stuw t_1,rp(5) !r[5]=c3; - or c_12,c_3,c_12 - - mulx a_6,b_0,t_1 !mul_add_c(a[6],b[0],c1,c2,c3); - addcc c_12,t_1,c_12 != - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_5,b_1,t_1 !=!mul_add_c(a[5],b[1],c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_4,b_2,t_1 !=!mul_add_c(a[4],b[2],c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_3,b_3,t_1 !=!mul_add_c(a[3],b[3],c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_2,b_4,t_1 !=!mul_add_c(a[2],b[4],c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw bp(6),b_6 != - mulx a_1,b_5,t_1 !mul_add_c(a[1],b[5],c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 != - lduw bp(7),b_7 - mulx a_0,b_6,t_1 !mul_add_c(a[0],b[6],c1,c2,c3); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(6) !r[6]=c1; - or c_12,c_3,c_12 != - - mulx a_0,b_7,t_1 !mul_add_c(a[0],b[7],c2,c3,c1); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_1,b_6,t_1 !mul_add_c(a[1],b[6],c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_2,b_5,t_1 !mul_add_c(a[2],b[5],c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_3,b_4,t_1 !mul_add_c(a[3],b[4],c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_4,b_3,t_1 !mul_add_c(a[4],b[3],c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_5,b_2,t_1 !mul_add_c(a[5],b[2],c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - lduw ap(7),a_7 - mulx a_6,b_1,t_1 !=!mul_add_c(a[6],b[1],c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_7,b_0,t_1 !=!mul_add_c(a[7],b[0],c2,c3,c1); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 != - stuw t_1,rp(7) !r[7]=c2; - or c_12,c_3,c_12 - - mulx a_7,b_1,t_1 !=!mul_add_c(a[7],b[1],c3,c1,c2); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 != - mulx a_6,b_2,t_1 !mul_add_c(a[6],b[2],c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 != - mulx a_5,b_3,t_1 !mul_add_c(a[5],b[3],c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 != - mulx a_4,b_4,t_1 !mul_add_c(a[4],b[4],c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 != - mulx a_3,b_5,t_1 !mul_add_c(a[3],b[5],c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 != - mulx a_2,b_6,t_1 !mul_add_c(a[2],b[6],c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 != - mulx a_1,b_7,t_1 !mul_add_c(a[1],b[7],c3,c1,c2); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 != - srlx t_1,32,c_12 - stuw t_1,rp(8) !r[8]=c3; - or c_12,c_3,c_12 - - mulx a_2,b_7,t_1 !=!mul_add_c(a[2],b[7],c1,c2,c3); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 != - mulx a_3,b_6,t_1 !mul_add_c(a[3],b[6],c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_4,b_5,t_1 !mul_add_c(a[4],b[5],c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_5,b_4,t_1 !mul_add_c(a[5],b[4],c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_6,b_3,t_1 !mul_add_c(a[6],b[3],c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_7,b_2,t_1 !mul_add_c(a[7],b[2],c1,c2,c3); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(9) !r[9]=c1; - or c_12,c_3,c_12 != - - mulx a_7,b_3,t_1 !mul_add_c(a[7],b[3],c2,c3,c1); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_6,b_4,t_1 !mul_add_c(a[6],b[4],c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_5,b_5,t_1 !mul_add_c(a[5],b[5],c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_4,b_6,t_1 !mul_add_c(a[4],b[6],c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_3,b_7,t_1 !mul_add_c(a[3],b[7],c2,c3,c1); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(10) !r[10]=c2; - or c_12,c_3,c_12 != - - mulx a_4,b_7,t_1 !mul_add_c(a[4],b[7],c3,c1,c2); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_5,b_6,t_1 !mul_add_c(a[5],b[6],c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_6,b_5,t_1 !mul_add_c(a[6],b[5],c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_7,b_4,t_1 !mul_add_c(a[7],b[4],c3,c1,c2); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(11) !r[11]=c3; - or c_12,c_3,c_12 != - - mulx a_7,b_5,t_1 !mul_add_c(a[7],b[5],c1,c2,c3); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_6,b_6,t_1 !mul_add_c(a[6],b[6],c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_5,b_7,t_1 !mul_add_c(a[5],b[7],c1,c2,c3); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(12) !r[12]=c1; - or c_12,c_3,c_12 != - - mulx a_6,b_7,t_1 !mul_add_c(a[6],b[7],c2,c3,c1); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_7,b_6,t_1 !mul_add_c(a[7],b[6],c2,c3,c1); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - srlx t_1,32,c_12 - st t_1,rp(13) !r[13]=c2; - or c_12,c_3,c_12 != - - mulx a_7,b_7,t_1 !mul_add_c(a[7],b[7],c3,c1,c2); - addcc c_12,t_1,t_1 - srlx t_1,32,c_12 != - stuw t_1,rp(14) !r[14]=c3; - stuw c_12,rp(15) !r[15]=c1; - - ret - restore %g0,%g0,%o0 != - -.type bn_mul_comba8,#function -.size bn_mul_comba8,(.-bn_mul_comba8) - -.align 32 - -.global bn_mul_comba4 -/* - * void bn_mul_comba4(r,a,b) - * BN_ULONG *r,*a,*b; - */ -bn_mul_comba4: - save %sp,FRAME_SIZE,%sp - lduw ap(0),a_0 - mov 1,t_2 - lduw bp(0),b_0 - sllx t_2,32,t_2 != - lduw bp(1),b_1 - mulx a_0,b_0,t_1 !mul_add_c(a[0],b[0],c1,c2,c3); - srlx t_1,32,c_12 - stuw t_1,rp(0) !=!r[0]=c1; - - lduw ap(1),a_1 - mulx a_0,b_1,t_1 !mul_add_c(a[0],b[1],c2,c3,c1); - addcc c_12,t_1,c_12 - clr c_3 != - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw ap(2),a_2 - mulx a_1,b_0,t_1 !=!mul_add_c(a[1],b[0],c2,c3,c1); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 != - stuw t_1,rp(1) !r[1]=c2; - or c_12,c_3,c_12 - - mulx a_2,b_0,t_1 !mul_add_c(a[2],b[0],c3,c1,c2); - addcc c_12,t_1,c_12 != - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw bp(2),b_2 != - mulx a_1,b_1,t_1 !mul_add_c(a[1],b[1],c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 != - lduw bp(3),b_3 - mulx a_0,b_2,t_1 !mul_add_c(a[0],b[2],c3,c1,c2); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(2) !r[2]=c3; - or c_12,c_3,c_12 != - - mulx a_0,b_3,t_1 !mul_add_c(a[0],b[3],c1,c2,c3); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - mulx a_1,b_2,t_1 !mul_add_c(a[1],b[2],c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 != - add c_3,t_2,c_3 - lduw ap(3),a_3 - mulx a_2,b_1,t_1 !mul_add_c(a[2],b[1],c1,c2,c3); - addcc c_12,t_1,c_12 != - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_3,b_0,t_1 !mul_add_c(a[3],b[0],c1,c2,c3);!= - addcc c_12,t_1,t_1 != - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(3) !=!r[3]=c1; - or c_12,c_3,c_12 - - mulx a_3,b_1,t_1 !mul_add_c(a[3],b[1],c2,c3,c1); - addcc c_12,t_1,c_12 - clr c_3 != - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_2,b_2,t_1 !mul_add_c(a[2],b[2],c2,c3,c1); - addcc c_12,t_1,c_12 != - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_1,b_3,t_1 !mul_add_c(a[1],b[3],c2,c3,c1); - addcc c_12,t_1,t_1 != - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(4) !=!r[4]=c2; - or c_12,c_3,c_12 - - mulx a_2,b_3,t_1 !mul_add_c(a[2],b[3],c3,c1,c2); - addcc c_12,t_1,c_12 - clr c_3 != - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_3,b_2,t_1 !mul_add_c(a[3],b[2],c3,c1,c2); - addcc c_12,t_1,t_1 != - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(5) !=!r[5]=c3; - or c_12,c_3,c_12 - - mulx a_3,b_3,t_1 !mul_add_c(a[3],b[3],c1,c2,c3); - addcc c_12,t_1,t_1 - srlx t_1,32,c_12 != - stuw t_1,rp(6) !r[6]=c1; - stuw c_12,rp(7) !r[7]=c2; - - ret - restore %g0,%g0,%o0 - -.type bn_mul_comba4,#function -.size bn_mul_comba4,(.-bn_mul_comba4) - -.align 32 - -.global bn_sqr_comba8 -bn_sqr_comba8: - save %sp,FRAME_SIZE,%sp - mov 1,t_2 - lduw ap(0),a_0 - sllx t_2,32,t_2 - lduw ap(1),a_1 - mulx a_0,a_0,t_1 !sqr_add_c(a,0,c1,c2,c3); - srlx t_1,32,c_12 - stuw t_1,rp(0) !r[0]=c1; - - lduw ap(2),a_2 - mulx a_0,a_1,t_1 !=!sqr_add_c2(a,1,0,c2,c3,c1); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(1) !r[1]=c2; - or c_12,c_3,c_12 - - mulx a_2,a_0,t_1 !sqr_add_c2(a,2,0,c3,c1,c2); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw ap(3),a_3 - mulx a_1,a_1,t_1 !sqr_add_c(a,1,c3,c1,c2); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(2) !r[2]=c3; - or c_12,c_3,c_12 - - mulx a_0,a_3,t_1 !sqr_add_c2(a,3,0,c1,c2,c3); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw ap(4),a_4 - mulx a_1,a_2,t_1 !sqr_add_c2(a,2,1,c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - st t_1,rp(3) !r[3]=c1; - or c_12,c_3,c_12 - - mulx a_4,a_0,t_1 !sqr_add_c2(a,4,0,c2,c3,c1); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_3,a_1,t_1 !sqr_add_c2(a,3,1,c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw ap(5),a_5 - mulx a_2,a_2,t_1 !sqr_add_c(a,2,c2,c3,c1); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(4) !r[4]=c2; - or c_12,c_3,c_12 - - mulx a_0,a_5,t_1 !sqr_add_c2(a,5,0,c3,c1,c2); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_1,a_4,t_1 !sqr_add_c2(a,4,1,c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw ap(6),a_6 - mulx a_2,a_3,t_1 !sqr_add_c2(a,3,2,c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(5) !r[5]=c3; - or c_12,c_3,c_12 - - mulx a_6,a_0,t_1 !sqr_add_c2(a,6,0,c1,c2,c3); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_5,a_1,t_1 !sqr_add_c2(a,5,1,c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_4,a_2,t_1 !sqr_add_c2(a,4,2,c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw ap(7),a_7 - mulx a_3,a_3,t_1 !=!sqr_add_c(a,3,c1,c2,c3); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(6) !r[6]=c1; - or c_12,c_3,c_12 - - mulx a_0,a_7,t_1 !sqr_add_c2(a,7,0,c2,c3,c1); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_1,a_6,t_1 !sqr_add_c2(a,6,1,c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_2,a_5,t_1 !sqr_add_c2(a,5,2,c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_3,a_4,t_1 !sqr_add_c2(a,4,3,c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(7) !r[7]=c2; - or c_12,c_3,c_12 - - mulx a_7,a_1,t_1 !sqr_add_c2(a,7,1,c3,c1,c2); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_6,a_2,t_1 !sqr_add_c2(a,6,2,c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_5,a_3,t_1 !sqr_add_c2(a,5,3,c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_4,a_4,t_1 !sqr_add_c(a,4,c3,c1,c2); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(8) !r[8]=c3; - or c_12,c_3,c_12 - - mulx a_2,a_7,t_1 !sqr_add_c2(a,7,2,c1,c2,c3); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_3,a_6,t_1 !sqr_add_c2(a,6,3,c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_4,a_5,t_1 !sqr_add_c2(a,5,4,c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(9) !r[9]=c1; - or c_12,c_3,c_12 - - mulx a_7,a_3,t_1 !sqr_add_c2(a,7,3,c2,c3,c1); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_6,a_4,t_1 !sqr_add_c2(a,6,4,c2,c3,c1); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_5,a_5,t_1 !sqr_add_c(a,5,c2,c3,c1); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(10) !r[10]=c2; - or c_12,c_3,c_12 - - mulx a_4,a_7,t_1 !sqr_add_c2(a,7,4,c3,c1,c2); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_5,a_6,t_1 !sqr_add_c2(a,6,5,c3,c1,c2); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(11) !r[11]=c3; - or c_12,c_3,c_12 - - mulx a_7,a_5,t_1 !sqr_add_c2(a,7,5,c1,c2,c3); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_6,a_6,t_1 !sqr_add_c(a,6,c1,c2,c3); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(12) !r[12]=c1; - or c_12,c_3,c_12 - - mulx a_6,a_7,t_1 !sqr_add_c2(a,7,6,c2,c3,c1); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(13) !r[13]=c2; - or c_12,c_3,c_12 - - mulx a_7,a_7,t_1 !sqr_add_c(a,7,c3,c1,c2); - addcc c_12,t_1,t_1 - srlx t_1,32,c_12 - stuw t_1,rp(14) !r[14]=c3; - stuw c_12,rp(15) !r[15]=c1; - - ret - restore %g0,%g0,%o0 - -.type bn_sqr_comba8,#function -.size bn_sqr_comba8,(.-bn_sqr_comba8) - -.align 32 - -.global bn_sqr_comba4 -/* - * void bn_sqr_comba4(r,a) - * BN_ULONG *r,*a; - */ -bn_sqr_comba4: - save %sp,FRAME_SIZE,%sp - mov 1,t_2 - lduw ap(0),a_0 - sllx t_2,32,t_2 - lduw ap(1),a_1 - mulx a_0,a_0,t_1 !sqr_add_c(a,0,c1,c2,c3); - srlx t_1,32,c_12 - stuw t_1,rp(0) !r[0]=c1; - - lduw ap(2),a_2 - mulx a_0,a_1,t_1 !sqr_add_c2(a,1,0,c2,c3,c1); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(1) !r[1]=c2; - or c_12,c_3,c_12 - - mulx a_2,a_0,t_1 !sqr_add_c2(a,2,0,c3,c1,c2); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - lduw ap(3),a_3 - mulx a_1,a_1,t_1 !sqr_add_c(a,1,c3,c1,c2); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(2) !r[2]=c3; - or c_12,c_3,c_12 - - mulx a_0,a_3,t_1 !sqr_add_c2(a,3,0,c1,c2,c3); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_1,a_2,t_1 !sqr_add_c2(a,2,1,c1,c2,c3); - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(3) !r[3]=c1; - or c_12,c_3,c_12 - - mulx a_3,a_1,t_1 !sqr_add_c2(a,3,1,c2,c3,c1); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,c_12 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - mulx a_2,a_2,t_1 !sqr_add_c(a,2,c2,c3,c1); - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(4) !r[4]=c2; - or c_12,c_3,c_12 - - mulx a_2,a_3,t_1 !sqr_add_c2(a,3,2,c3,c1,c2); - addcc c_12,t_1,c_12 - clr c_3 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - addcc c_12,t_1,t_1 - bcs,a %xcc,.+8 - add c_3,t_2,c_3 - srlx t_1,32,c_12 - stuw t_1,rp(5) !r[5]=c3; - or c_12,c_3,c_12 - - mulx a_3,a_3,t_1 !sqr_add_c(a,3,c1,c2,c3); - addcc c_12,t_1,t_1 - srlx t_1,32,c_12 - stuw t_1,rp(6) !r[6]=c1; - stuw c_12,rp(7) !r[7]=c2; - - ret - restore %g0,%g0,%o0 - -.type bn_sqr_comba4,#function -.size bn_sqr_comba4,(.-bn_sqr_comba4) - -.align 32 diff --git a/app/openssl/crypto/bn/asm/sparcv9-mont.pl b/app/openssl/crypto/bn/asm/sparcv9-mont.pl deleted file mode 100644 index b8fb1e8a..00000000 --- a/app/openssl/crypto/bn/asm/sparcv9-mont.pl +++ /dev/null @@ -1,606 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# December 2005 -# -# Pure SPARCv9/8+ and IALU-only bn_mul_mont implementation. The reasons -# for undertaken effort are multiple. First of all, UltraSPARC is not -# the whole SPARCv9 universe and other VIS-free implementations deserve -# optimized code as much. Secondly, newly introduced UltraSPARC T1, -# a.k.a. Niagara, has shared FPU and concurrent FPU-intensive pathes, -# such as sparcv9a-mont, will simply sink it. Yes, T1 is equipped with -# several integrated RSA/DSA accelerator circuits accessible through -# kernel driver [only(*)], but having decent user-land software -# implementation is important too. Finally, reasons like desire to -# experiment with dedicated squaring procedure. Yes, this module -# implements one, because it was easiest to draft it in SPARCv9 -# instructions... - -# (*) Engine accessing the driver in question is on my TODO list. -# For reference, acceleator is estimated to give 6 to 10 times -# improvement on single-threaded RSA sign. It should be noted -# that 6-10x improvement coefficient does not actually mean -# something extraordinary in terms of absolute [single-threaded] -# performance, as SPARCv9 instruction set is by all means least -# suitable for high performance crypto among other 64 bit -# platforms. 6-10x factor simply places T1 in same performance -# domain as say AMD64 and IA-64. Improvement of RSA verify don't -# appear impressive at all, but it's the sign operation which is -# far more critical/interesting. - -# You might notice that inner loops are modulo-scheduled:-) This has -# essentially negligible impact on UltraSPARC performance, it's -# Fujitsu SPARC64 V users who should notice and hopefully appreciate -# the advantage... Currently this module surpasses sparcv9a-mont.pl -# by ~20% on UltraSPARC-III and later cores, but recall that sparcv9a -# module still have hidden potential [see TODO list there], which is -# estimated to be larger than 20%... - -# int bn_mul_mont( -$rp="%i0"; # BN_ULONG *rp, -$ap="%i1"; # const BN_ULONG *ap, -$bp="%i2"; # const BN_ULONG *bp, -$np="%i3"; # const BN_ULONG *np, -$n0="%i4"; # const BN_ULONG *n0, -$num="%i5"; # int num); - -$bits=32; -for (@ARGV) { $bits=64 if (/\-m64/ || /\-xarch\=v9/); } -if ($bits==64) { $bias=2047; $frame=192; } -else { $bias=0; $frame=128; } - -$car0="%o0"; -$car1="%o1"; -$car2="%o2"; # 1 bit -$acc0="%o3"; -$acc1="%o4"; -$mask="%g1"; # 32 bits, what a waste... -$tmp0="%g4"; -$tmp1="%g5"; - -$i="%l0"; -$j="%l1"; -$mul0="%l2"; -$mul1="%l3"; -$tp="%l4"; -$apj="%l5"; -$npj="%l6"; -$tpj="%l7"; - -$fname="bn_mul_mont_int"; - -$code=<<___; -.section ".text",#alloc,#execinstr - -.global $fname -.align 32 -$fname: - cmp %o5,4 ! 128 bits minimum - bge,pt %icc,.Lenter - sethi %hi(0xffffffff),$mask - retl - clr %o0 -.align 32 -.Lenter: - save %sp,-$frame,%sp - sll $num,2,$num ! num*=4 - or $mask,%lo(0xffffffff),$mask - ld [$n0],$n0 - cmp $ap,$bp - and $num,$mask,$num - ld [$bp],$mul0 ! bp[0] - nop - - add %sp,$bias,%o7 ! real top of stack - ld [$ap],$car0 ! ap[0] ! redundant in squaring context - sub %o7,$num,%o7 - ld [$ap+4],$apj ! ap[1] - and %o7,-1024,%o7 - ld [$np],$car1 ! np[0] - sub %o7,$bias,%sp ! alloca - ld [$np+4],$npj ! np[1] - be,pt `$bits==32?"%icc":"%xcc"`,.Lbn_sqr_mont - mov 12,$j - - mulx $car0,$mul0,$car0 ! ap[0]*bp[0] - mulx $apj,$mul0,$tmp0 !prologue! ap[1]*bp[0] - and $car0,$mask,$acc0 - add %sp,$bias+$frame,$tp - ld [$ap+8],$apj !prologue! - - mulx $n0,$acc0,$mul1 ! "t[0]"*n0 - and $mul1,$mask,$mul1 - - mulx $car1,$mul1,$car1 ! np[0]*"t[0]"*n0 - mulx $npj,$mul1,$acc1 !prologue! np[1]*"t[0]"*n0 - srlx $car0,32,$car0 - add $acc0,$car1,$car1 - ld [$np+8],$npj !prologue! - srlx $car1,32,$car1 - mov $tmp0,$acc0 !prologue! - -.L1st: - mulx $apj,$mul0,$tmp0 - mulx $npj,$mul1,$tmp1 - add $acc0,$car0,$car0 - ld [$ap+$j],$apj ! ap[j] - and $car0,$mask,$acc0 - add $acc1,$car1,$car1 - ld [$np+$j],$npj ! np[j] - srlx $car0,32,$car0 - add $acc0,$car1,$car1 - add $j,4,$j ! j++ - mov $tmp0,$acc0 - st $car1,[$tp] - cmp $j,$num - mov $tmp1,$acc1 - srlx $car1,32,$car1 - bl %icc,.L1st - add $tp,4,$tp ! tp++ -!.L1st - - mulx $apj,$mul0,$tmp0 !epilogue! - mulx $npj,$mul1,$tmp1 - add $acc0,$car0,$car0 - and $car0,$mask,$acc0 - add $acc1,$car1,$car1 - srlx $car0,32,$car0 - add $acc0,$car1,$car1 - st $car1,[$tp] - srlx $car1,32,$car1 - - add $tmp0,$car0,$car0 - and $car0,$mask,$acc0 - add $tmp1,$car1,$car1 - srlx $car0,32,$car0 - add $acc0,$car1,$car1 - st $car1,[$tp+4] - srlx $car1,32,$car1 - - add $car0,$car1,$car1 - st $car1,[$tp+8] - srlx $car1,32,$car2 - - mov 4,$i ! i++ - ld [$bp+4],$mul0 ! bp[1] -.Louter: - add %sp,$bias+$frame,$tp - ld [$ap],$car0 ! ap[0] - ld [$ap+4],$apj ! ap[1] - ld [$np],$car1 ! np[0] - ld [$np+4],$npj ! np[1] - ld [$tp],$tmp1 ! tp[0] - ld [$tp+4],$tpj ! tp[1] - mov 12,$j - - mulx $car0,$mul0,$car0 - mulx $apj,$mul0,$tmp0 !prologue! - add $tmp1,$car0,$car0 - ld [$ap+8],$apj !prologue! - and $car0,$mask,$acc0 - - mulx $n0,$acc0,$mul1 - and $mul1,$mask,$mul1 - - mulx $car1,$mul1,$car1 - mulx $npj,$mul1,$acc1 !prologue! - srlx $car0,32,$car0 - add $acc0,$car1,$car1 - ld [$np+8],$npj !prologue! - srlx $car1,32,$car1 - mov $tmp0,$acc0 !prologue! - -.Linner: - mulx $apj,$mul0,$tmp0 - mulx $npj,$mul1,$tmp1 - add $tpj,$car0,$car0 - ld [$ap+$j],$apj ! ap[j] - add $acc0,$car0,$car0 - add $acc1,$car1,$car1 - ld [$np+$j],$npj ! np[j] - and $car0,$mask,$acc0 - ld [$tp+8],$tpj ! tp[j] - srlx $car0,32,$car0 - add $acc0,$car1,$car1 - add $j,4,$j ! j++ - mov $tmp0,$acc0 - st $car1,[$tp] ! tp[j-1] - srlx $car1,32,$car1 - mov $tmp1,$acc1 - cmp $j,$num - bl %icc,.Linner - add $tp,4,$tp ! tp++ -!.Linner - - mulx $apj,$mul0,$tmp0 !epilogue! - mulx $npj,$mul1,$tmp1 - add $tpj,$car0,$car0 - add $acc0,$car0,$car0 - ld [$tp+8],$tpj ! tp[j] - and $car0,$mask,$acc0 - add $acc1,$car1,$car1 - srlx $car0,32,$car0 - add $acc0,$car1,$car1 - st $car1,[$tp] ! tp[j-1] - srlx $car1,32,$car1 - - add $tpj,$car0,$car0 - add $tmp0,$car0,$car0 - and $car0,$mask,$acc0 - add $tmp1,$car1,$car1 - add $acc0,$car1,$car1 - st $car1,[$tp+4] ! tp[j-1] - srlx $car0,32,$car0 - add $i,4,$i ! i++ - srlx $car1,32,$car1 - - add $car0,$car1,$car1 - cmp $i,$num - add $car2,$car1,$car1 - st $car1,[$tp+8] - - srlx $car1,32,$car2 - bl,a %icc,.Louter - ld [$bp+$i],$mul0 ! bp[i] -!.Louter - - add $tp,12,$tp - -.Ltail: - add $np,$num,$np - add $rp,$num,$rp - mov $tp,$ap - sub %g0,$num,%o7 ! k=-num - ba .Lsub - subcc %g0,%g0,%g0 ! clear %icc.c -.align 16 -.Lsub: - ld [$tp+%o7],%o0 - ld [$np+%o7],%o1 - subccc %o0,%o1,%o1 ! tp[j]-np[j] - add $rp,%o7,$i - add %o7,4,%o7 - brnz %o7,.Lsub - st %o1,[$i] - subc $car2,0,$car2 ! handle upmost overflow bit - and $tp,$car2,$ap - andn $rp,$car2,$np - or $ap,$np,$ap - sub %g0,$num,%o7 - -.Lcopy: - ld [$ap+%o7],%o0 ! copy or in-place refresh - st %g0,[$tp+%o7] ! zap tp - st %o0,[$rp+%o7] - add %o7,4,%o7 - brnz %o7,.Lcopy - nop - mov 1,%i0 - ret - restore -___ - -######## -######## .Lbn_sqr_mont gives up to 20% *overall* improvement over -######## code without following dedicated squaring procedure. -######## -$sbit="%i2"; # re-use $bp! - -$code.=<<___; -.align 32 -.Lbn_sqr_mont: - mulx $mul0,$mul0,$car0 ! ap[0]*ap[0] - mulx $apj,$mul0,$tmp0 !prologue! - and $car0,$mask,$acc0 - add %sp,$bias+$frame,$tp - ld [$ap+8],$apj !prologue! - - mulx $n0,$acc0,$mul1 ! "t[0]"*n0 - srlx $car0,32,$car0 - and $mul1,$mask,$mul1 - - mulx $car1,$mul1,$car1 ! np[0]*"t[0]"*n0 - mulx $npj,$mul1,$acc1 !prologue! - and $car0,1,$sbit - ld [$np+8],$npj !prologue! - srlx $car0,1,$car0 - add $acc0,$car1,$car1 - srlx $car1,32,$car1 - mov $tmp0,$acc0 !prologue! - -.Lsqr_1st: - mulx $apj,$mul0,$tmp0 - mulx $npj,$mul1,$tmp1 - add $acc0,$car0,$car0 ! ap[j]*a0+c0 - add $acc1,$car1,$car1 - ld [$ap+$j],$apj ! ap[j] - and $car0,$mask,$acc0 - ld [$np+$j],$npj ! np[j] - srlx $car0,32,$car0 - add $acc0,$acc0,$acc0 - or $sbit,$acc0,$acc0 - mov $tmp1,$acc1 - srlx $acc0,32,$sbit - add $j,4,$j ! j++ - and $acc0,$mask,$acc0 - cmp $j,$num - add $acc0,$car1,$car1 - st $car1,[$tp] - mov $tmp0,$acc0 - srlx $car1,32,$car1 - bl %icc,.Lsqr_1st - add $tp,4,$tp ! tp++ -!.Lsqr_1st - - mulx $apj,$mul0,$tmp0 ! epilogue - mulx $npj,$mul1,$tmp1 - add $acc0,$car0,$car0 ! ap[j]*a0+c0 - add $acc1,$car1,$car1 - and $car0,$mask,$acc0 - srlx $car0,32,$car0 - add $acc0,$acc0,$acc0 - or $sbit,$acc0,$acc0 - srlx $acc0,32,$sbit - and $acc0,$mask,$acc0 - add $acc0,$car1,$car1 - st $car1,[$tp] - srlx $car1,32,$car1 - - add $tmp0,$car0,$car0 ! ap[j]*a0+c0 - add $tmp1,$car1,$car1 - and $car0,$mask,$acc0 - srlx $car0,32,$car0 - add $acc0,$acc0,$acc0 - or $sbit,$acc0,$acc0 - srlx $acc0,32,$sbit - and $acc0,$mask,$acc0 - add $acc0,$car1,$car1 - st $car1,[$tp+4] - srlx $car1,32,$car1 - - add $car0,$car0,$car0 - or $sbit,$car0,$car0 - add $car0,$car1,$car1 - st $car1,[$tp+8] - srlx $car1,32,$car2 - - ld [%sp+$bias+$frame],$tmp0 ! tp[0] - ld [%sp+$bias+$frame+4],$tmp1 ! tp[1] - ld [%sp+$bias+$frame+8],$tpj ! tp[2] - ld [$ap+4],$mul0 ! ap[1] - ld [$ap+8],$apj ! ap[2] - ld [$np],$car1 ! np[0] - ld [$np+4],$npj ! np[1] - mulx $n0,$tmp0,$mul1 - - mulx $mul0,$mul0,$car0 - and $mul1,$mask,$mul1 - - mulx $car1,$mul1,$car1 - mulx $npj,$mul1,$acc1 - add $tmp0,$car1,$car1 - and $car0,$mask,$acc0 - ld [$np+8],$npj ! np[2] - srlx $car1,32,$car1 - add $tmp1,$car1,$car1 - srlx $car0,32,$car0 - add $acc0,$car1,$car1 - and $car0,1,$sbit - add $acc1,$car1,$car1 - srlx $car0,1,$car0 - mov 12,$j - st $car1,[%sp+$bias+$frame] ! tp[0]= - srlx $car1,32,$car1 - add %sp,$bias+$frame+4,$tp - -.Lsqr_2nd: - mulx $apj,$mul0,$acc0 - mulx $npj,$mul1,$acc1 - add $acc0,$car0,$car0 - add $tpj,$car1,$car1 - ld [$ap+$j],$apj ! ap[j] - and $car0,$mask,$acc0 - ld [$np+$j],$npj ! np[j] - srlx $car0,32,$car0 - add $acc1,$car1,$car1 - ld [$tp+8],$tpj ! tp[j] - add $acc0,$acc0,$acc0 - add $j,4,$j ! j++ - or $sbit,$acc0,$acc0 - srlx $acc0,32,$sbit - and $acc0,$mask,$acc0 - cmp $j,$num - add $acc0,$car1,$car1 - st $car1,[$tp] ! tp[j-1] - srlx $car1,32,$car1 - bl %icc,.Lsqr_2nd - add $tp,4,$tp ! tp++ -!.Lsqr_2nd - - mulx $apj,$mul0,$acc0 - mulx $npj,$mul1,$acc1 - add $acc0,$car0,$car0 - add $tpj,$car1,$car1 - and $car0,$mask,$acc0 - srlx $car0,32,$car0 - add $acc1,$car1,$car1 - add $acc0,$acc0,$acc0 - or $sbit,$acc0,$acc0 - srlx $acc0,32,$sbit - and $acc0,$mask,$acc0 - add $acc0,$car1,$car1 - st $car1,[$tp] ! tp[j-1] - srlx $car1,32,$car1 - - add $car0,$car0,$car0 - or $sbit,$car0,$car0 - add $car0,$car1,$car1 - add $car2,$car1,$car1 - st $car1,[$tp+4] - srlx $car1,32,$car2 - - ld [%sp+$bias+$frame],$tmp1 ! tp[0] - ld [%sp+$bias+$frame+4],$tpj ! tp[1] - ld [$ap+8],$mul0 ! ap[2] - ld [$np],$car1 ! np[0] - ld [$np+4],$npj ! np[1] - mulx $n0,$tmp1,$mul1 - and $mul1,$mask,$mul1 - mov 8,$i - - mulx $mul0,$mul0,$car0 - mulx $car1,$mul1,$car1 - and $car0,$mask,$acc0 - add $tmp1,$car1,$car1 - srlx $car0,32,$car0 - add %sp,$bias+$frame,$tp - srlx $car1,32,$car1 - and $car0,1,$sbit - srlx $car0,1,$car0 - mov 4,$j - -.Lsqr_outer: -.Lsqr_inner1: - mulx $npj,$mul1,$acc1 - add $tpj,$car1,$car1 - add $j,4,$j - ld [$tp+8],$tpj - cmp $j,$i - add $acc1,$car1,$car1 - ld [$np+$j],$npj - st $car1,[$tp] - srlx $car1,32,$car1 - bl %icc,.Lsqr_inner1 - add $tp,4,$tp -!.Lsqr_inner1 - - add $j,4,$j - ld [$ap+$j],$apj ! ap[j] - mulx $npj,$mul1,$acc1 - add $tpj,$car1,$car1 - ld [$np+$j],$npj ! np[j] - add $acc0,$car1,$car1 - ld [$tp+8],$tpj ! tp[j] - add $acc1,$car1,$car1 - st $car1,[$tp] - srlx $car1,32,$car1 - - add $j,4,$j - cmp $j,$num - be,pn %icc,.Lsqr_no_inner2 - add $tp,4,$tp - -.Lsqr_inner2: - mulx $apj,$mul0,$acc0 - mulx $npj,$mul1,$acc1 - add $tpj,$car1,$car1 - add $acc0,$car0,$car0 - ld [$ap+$j],$apj ! ap[j] - and $car0,$mask,$acc0 - ld [$np+$j],$npj ! np[j] - srlx $car0,32,$car0 - add $acc0,$acc0,$acc0 - ld [$tp+8],$tpj ! tp[j] - or $sbit,$acc0,$acc0 - add $j,4,$j ! j++ - srlx $acc0,32,$sbit - and $acc0,$mask,$acc0 - cmp $j,$num - add $acc0,$car1,$car1 - add $acc1,$car1,$car1 - st $car1,[$tp] ! tp[j-1] - srlx $car1,32,$car1 - bl %icc,.Lsqr_inner2 - add $tp,4,$tp ! tp++ - -.Lsqr_no_inner2: - mulx $apj,$mul0,$acc0 - mulx $npj,$mul1,$acc1 - add $tpj,$car1,$car1 - add $acc0,$car0,$car0 - and $car0,$mask,$acc0 - srlx $car0,32,$car0 - add $acc0,$acc0,$acc0 - or $sbit,$acc0,$acc0 - srlx $acc0,32,$sbit - and $acc0,$mask,$acc0 - add $acc0,$car1,$car1 - add $acc1,$car1,$car1 - st $car1,[$tp] ! tp[j-1] - srlx $car1,32,$car1 - - add $car0,$car0,$car0 - or $sbit,$car0,$car0 - add $car0,$car1,$car1 - add $car2,$car1,$car1 - st $car1,[$tp+4] - srlx $car1,32,$car2 - - add $i,4,$i ! i++ - ld [%sp+$bias+$frame],$tmp1 ! tp[0] - ld [%sp+$bias+$frame+4],$tpj ! tp[1] - ld [$ap+$i],$mul0 ! ap[j] - ld [$np],$car1 ! np[0] - ld [$np+4],$npj ! np[1] - mulx $n0,$tmp1,$mul1 - and $mul1,$mask,$mul1 - add $i,4,$tmp0 - - mulx $mul0,$mul0,$car0 - mulx $car1,$mul1,$car1 - and $car0,$mask,$acc0 - add $tmp1,$car1,$car1 - srlx $car0,32,$car0 - add %sp,$bias+$frame,$tp - srlx $car1,32,$car1 - and $car0,1,$sbit - srlx $car0,1,$car0 - - cmp $tmp0,$num ! i<num-1 - bl %icc,.Lsqr_outer - mov 4,$j - -.Lsqr_last: - mulx $npj,$mul1,$acc1 - add $tpj,$car1,$car1 - add $j,4,$j - ld [$tp+8],$tpj - cmp $j,$i - add $acc1,$car1,$car1 - ld [$np+$j],$npj - st $car1,[$tp] - srlx $car1,32,$car1 - bl %icc,.Lsqr_last - add $tp,4,$tp -!.Lsqr_last - - mulx $npj,$mul1,$acc1 - add $tpj,$car1,$car1 - add $acc0,$car1,$car1 - add $acc1,$car1,$car1 - st $car1,[$tp] - srlx $car1,32,$car1 - - add $car0,$car0,$car0 ! recover $car0 - or $sbit,$car0,$car0 - add $car0,$car1,$car1 - add $car2,$car1,$car1 - st $car1,[$tp+4] - srlx $car1,32,$car2 - - ba .Ltail - add $tp,8,$tp -.type $fname,#function -.size $fname,(.-$fname) -.asciz "Montgomery Multipltication for SPARCv9, CRYPTOGAMS by <appro\@openssl.org>" -.align 32 -___ -$code =~ s/\`([^\`]*)\`/eval($1)/gem; -print $code; -close STDOUT; diff --git a/app/openssl/crypto/bn/asm/sparcv9a-mont.pl b/app/openssl/crypto/bn/asm/sparcv9a-mont.pl deleted file mode 100755 index a14205f2..00000000 --- a/app/openssl/crypto/bn/asm/sparcv9a-mont.pl +++ /dev/null @@ -1,882 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# October 2005 -# -# "Teaser" Montgomery multiplication module for UltraSPARC. Why FPU? -# Because unlike integer multiplier, which simply stalls whole CPU, -# FPU is fully pipelined and can effectively emit 48 bit partial -# product every cycle. Why not blended SPARC v9? One can argue that -# making this module dependent on UltraSPARC VIS extension limits its -# binary compatibility. Well yes, it does exclude SPARC64 prior-V(!) -# implementations from compatibility matrix. But the rest, whole Sun -# UltraSPARC family and brand new Fujitsu's SPARC64 V, all support -# VIS extension instructions used in this module. This is considered -# good enough to not care about HAL SPARC64 users [if any] who have -# integer-only pure SPARCv9 module to "fall down" to. - -# USI&II cores currently exhibit uniform 2x improvement [over pre- -# bn_mul_mont codebase] for all key lengths and benchmarks. On USIII -# performance improves few percents for shorter keys and worsens few -# percents for longer keys. This is because USIII integer multiplier -# is >3x faster than USI&II one, which is harder to match [but see -# TODO list below]. It should also be noted that SPARC64 V features -# out-of-order execution, which *might* mean that integer multiplier -# is pipelined, which in turn *might* be impossible to match... On -# additional note, SPARC64 V implements FP Multiply-Add instruction, -# which is perfectly usable in this context... In other words, as far -# as Fujitsu SPARC64 V goes, talk to the author:-) - -# The implementation implies following "non-natural" limitations on -# input arguments: -# - num may not be less than 4; -# - num has to be even; -# Failure to meet either condition has no fatal effects, simply -# doesn't give any performance gain. - -# TODO: -# - modulo-schedule inner loop for better performance (on in-order -# execution core such as UltraSPARC this shall result in further -# noticeable(!) improvement); -# - dedicated squaring procedure[?]; - -###################################################################### -# November 2006 -# -# Modulo-scheduled inner loops allow to interleave floating point and -# integer instructions and minimize Read-After-Write penalties. This -# results in *further* 20-50% perfromance improvement [depending on -# key length, more for longer keys] on USI&II cores and 30-80% - on -# USIII&IV. - -$fname="bn_mul_mont_fpu"; -$bits=32; -for (@ARGV) { $bits=64 if (/\-m64/ || /\-xarch\=v9/); } - -if ($bits==64) { - $bias=2047; - $frame=192; -} else { - $bias=0; - $frame=128; # 96 rounded up to largest known cache-line -} -$locals=64; - -# In order to provide for 32-/64-bit ABI duality, I keep integers wider -# than 32 bit in %g1-%g4 and %o0-%o5. %l0-%l7 and %i0-%i5 are used -# exclusively for pointers, indexes and other small values... -# int bn_mul_mont( -$rp="%i0"; # BN_ULONG *rp, -$ap="%i1"; # const BN_ULONG *ap, -$bp="%i2"; # const BN_ULONG *bp, -$np="%i3"; # const BN_ULONG *np, -$n0="%i4"; # const BN_ULONG *n0, -$num="%i5"; # int num); - -$tp="%l0"; # t[num] -$ap_l="%l1"; # a[num],n[num] are smashed to 32-bit words and saved -$ap_h="%l2"; # to these four vectors as double-precision FP values. -$np_l="%l3"; # This way a bunch of fxtods are eliminated in second -$np_h="%l4"; # loop and L1-cache aliasing is minimized... -$i="%l5"; -$j="%l6"; -$mask="%l7"; # 16-bit mask, 0xffff - -$n0="%g4"; # reassigned(!) to "64-bit" register -$carry="%i4"; # %i4 reused(!) for a carry bit - -# FP register naming chart -# -# ..HILO -# dcba -# -------- -# LOa -# LOb -# LOc -# LOd -# HIa -# HIb -# HIc -# HId -# ..a -# ..b -$ba="%f0"; $bb="%f2"; $bc="%f4"; $bd="%f6"; -$na="%f8"; $nb="%f10"; $nc="%f12"; $nd="%f14"; -$alo="%f16"; $alo_="%f17"; $ahi="%f18"; $ahi_="%f19"; -$nlo="%f20"; $nlo_="%f21"; $nhi="%f22"; $nhi_="%f23"; - -$dota="%f24"; $dotb="%f26"; - -$aloa="%f32"; $alob="%f34"; $aloc="%f36"; $alod="%f38"; -$ahia="%f40"; $ahib="%f42"; $ahic="%f44"; $ahid="%f46"; -$nloa="%f48"; $nlob="%f50"; $nloc="%f52"; $nlod="%f54"; -$nhia="%f56"; $nhib="%f58"; $nhic="%f60"; $nhid="%f62"; - -$ASI_FL16_P=0xD2; # magic ASI value to engage 16-bit FP load - -$code=<<___; -.section ".text",#alloc,#execinstr - -.global $fname -.align 32 -$fname: - save %sp,-$frame-$locals,%sp - - cmp $num,4 - bl,a,pn %icc,.Lret - clr %i0 - andcc $num,1,%g0 ! $num has to be even... - bnz,a,pn %icc,.Lret - clr %i0 ! signal "unsupported input value" - - srl $num,1,$num - sethi %hi(0xffff),$mask - ld [%i4+0],$n0 ! $n0 reassigned, remember? - or $mask,%lo(0xffff),$mask - ld [%i4+4],%o0 - sllx %o0,32,%o0 - or %o0,$n0,$n0 ! $n0=n0[1].n0[0] - - sll $num,3,$num ! num*=8 - - add %sp,$bias,%o0 ! real top of stack - sll $num,2,%o1 - add %o1,$num,%o1 ! %o1=num*5 - sub %o0,%o1,%o0 - and %o0,-2048,%o0 ! optimize TLB utilization - sub %o0,$bias,%sp ! alloca(5*num*8) - - rd %asi,%o7 ! save %asi - add %sp,$bias+$frame+$locals,$tp - add $tp,$num,$ap_l - add $ap_l,$num,$ap_l ! [an]p_[lh] point at the vectors' ends ! - add $ap_l,$num,$ap_h - add $ap_h,$num,$np_l - add $np_l,$num,$np_h - - wr %g0,$ASI_FL16_P,%asi ! setup %asi for 16-bit FP loads - - add $rp,$num,$rp ! readjust input pointers to point - add $ap,$num,$ap ! at the ends too... - add $bp,$num,$bp - add $np,$num,$np - - stx %o7,[%sp+$bias+$frame+48] ! save %asi - - sub %g0,$num,$i ! i=-num - sub %g0,$num,$j ! j=-num - - add $ap,$j,%o3 - add $bp,$i,%o4 - - ld [%o3+4],%g1 ! bp[0] - ld [%o3+0],%o0 - ld [%o4+4],%g5 ! ap[0] - sllx %g1,32,%g1 - ld [%o4+0],%o1 - sllx %g5,32,%g5 - or %g1,%o0,%o0 - or %g5,%o1,%o1 - - add $np,$j,%o5 - - mulx %o1,%o0,%o0 ! ap[0]*bp[0] - mulx $n0,%o0,%o0 ! ap[0]*bp[0]*n0 - stx %o0,[%sp+$bias+$frame+0] - - ld [%o3+0],$alo_ ! load a[j] as pair of 32-bit words - fzeros $alo - ld [%o3+4],$ahi_ - fzeros $ahi - ld [%o5+0],$nlo_ ! load n[j] as pair of 32-bit words - fzeros $nlo - ld [%o5+4],$nhi_ - fzeros $nhi - - ! transfer b[i] to FPU as 4x16-bit values - ldda [%o4+2]%asi,$ba - fxtod $alo,$alo - ldda [%o4+0]%asi,$bb - fxtod $ahi,$ahi - ldda [%o4+6]%asi,$bc - fxtod $nlo,$nlo - ldda [%o4+4]%asi,$bd - fxtod $nhi,$nhi - - ! transfer ap[0]*b[0]*n0 to FPU as 4x16-bit values - ldda [%sp+$bias+$frame+6]%asi,$na - fxtod $ba,$ba - ldda [%sp+$bias+$frame+4]%asi,$nb - fxtod $bb,$bb - ldda [%sp+$bias+$frame+2]%asi,$nc - fxtod $bc,$bc - ldda [%sp+$bias+$frame+0]%asi,$nd - fxtod $bd,$bd - - std $alo,[$ap_l+$j] ! save smashed ap[j] in double format - fxtod $na,$na - std $ahi,[$ap_h+$j] - fxtod $nb,$nb - std $nlo,[$np_l+$j] ! save smashed np[j] in double format - fxtod $nc,$nc - std $nhi,[$np_h+$j] - fxtod $nd,$nd - - fmuld $alo,$ba,$aloa - fmuld $nlo,$na,$nloa - fmuld $alo,$bb,$alob - fmuld $nlo,$nb,$nlob - fmuld $alo,$bc,$aloc - faddd $aloa,$nloa,$nloa - fmuld $nlo,$nc,$nloc - fmuld $alo,$bd,$alod - faddd $alob,$nlob,$nlob - fmuld $nlo,$nd,$nlod - fmuld $ahi,$ba,$ahia - faddd $aloc,$nloc,$nloc - fmuld $nhi,$na,$nhia - fmuld $ahi,$bb,$ahib - faddd $alod,$nlod,$nlod - fmuld $nhi,$nb,$nhib - fmuld $ahi,$bc,$ahic - faddd $ahia,$nhia,$nhia - fmuld $nhi,$nc,$nhic - fmuld $ahi,$bd,$ahid - faddd $ahib,$nhib,$nhib - fmuld $nhi,$nd,$nhid - - faddd $ahic,$nhic,$dota ! $nhic - faddd $ahid,$nhid,$dotb ! $nhid - - faddd $nloc,$nhia,$nloc - faddd $nlod,$nhib,$nlod - - fdtox $nloa,$nloa - fdtox $nlob,$nlob - fdtox $nloc,$nloc - fdtox $nlod,$nlod - - std $nloa,[%sp+$bias+$frame+0] - add $j,8,$j - std $nlob,[%sp+$bias+$frame+8] - add $ap,$j,%o4 - std $nloc,[%sp+$bias+$frame+16] - add $np,$j,%o5 - std $nlod,[%sp+$bias+$frame+24] - - ld [%o4+0],$alo_ ! load a[j] as pair of 32-bit words - fzeros $alo - ld [%o4+4],$ahi_ - fzeros $ahi - ld [%o5+0],$nlo_ ! load n[j] as pair of 32-bit words - fzeros $nlo - ld [%o5+4],$nhi_ - fzeros $nhi - - fxtod $alo,$alo - fxtod $ahi,$ahi - fxtod $nlo,$nlo - fxtod $nhi,$nhi - - ldx [%sp+$bias+$frame+0],%o0 - fmuld $alo,$ba,$aloa - ldx [%sp+$bias+$frame+8],%o1 - fmuld $nlo,$na,$nloa - ldx [%sp+$bias+$frame+16],%o2 - fmuld $alo,$bb,$alob - ldx [%sp+$bias+$frame+24],%o3 - fmuld $nlo,$nb,$nlob - - srlx %o0,16,%o7 - std $alo,[$ap_l+$j] ! save smashed ap[j] in double format - fmuld $alo,$bc,$aloc - add %o7,%o1,%o1 - std $ahi,[$ap_h+$j] - faddd $aloa,$nloa,$nloa - fmuld $nlo,$nc,$nloc - srlx %o1,16,%o7 - std $nlo,[$np_l+$j] ! save smashed np[j] in double format - fmuld $alo,$bd,$alod - add %o7,%o2,%o2 - std $nhi,[$np_h+$j] - faddd $alob,$nlob,$nlob - fmuld $nlo,$nd,$nlod - srlx %o2,16,%o7 - fmuld $ahi,$ba,$ahia - add %o7,%o3,%o3 ! %o3.%o2[0..15].%o1[0..15].%o0[0..15] - faddd $aloc,$nloc,$nloc - fmuld $nhi,$na,$nhia - !and %o0,$mask,%o0 - !and %o1,$mask,%o1 - !and %o2,$mask,%o2 - !sllx %o1,16,%o1 - !sllx %o2,32,%o2 - !sllx %o3,48,%o7 - !or %o1,%o0,%o0 - !or %o2,%o0,%o0 - !or %o7,%o0,%o0 ! 64-bit result - srlx %o3,16,%g1 ! 34-bit carry - fmuld $ahi,$bb,$ahib - - faddd $alod,$nlod,$nlod - fmuld $nhi,$nb,$nhib - fmuld $ahi,$bc,$ahic - faddd $ahia,$nhia,$nhia - fmuld $nhi,$nc,$nhic - fmuld $ahi,$bd,$ahid - faddd $ahib,$nhib,$nhib - fmuld $nhi,$nd,$nhid - - faddd $dota,$nloa,$nloa - faddd $dotb,$nlob,$nlob - faddd $ahic,$nhic,$dota ! $nhic - faddd $ahid,$nhid,$dotb ! $nhid - - faddd $nloc,$nhia,$nloc - faddd $nlod,$nhib,$nlod - - fdtox $nloa,$nloa - fdtox $nlob,$nlob - fdtox $nloc,$nloc - fdtox $nlod,$nlod - - std $nloa,[%sp+$bias+$frame+0] - std $nlob,[%sp+$bias+$frame+8] - addcc $j,8,$j - std $nloc,[%sp+$bias+$frame+16] - bz,pn %icc,.L1stskip - std $nlod,[%sp+$bias+$frame+24] - -.align 32 ! incidentally already aligned ! -.L1st: - add $ap,$j,%o4 - add $np,$j,%o5 - ld [%o4+0],$alo_ ! load a[j] as pair of 32-bit words - fzeros $alo - ld [%o4+4],$ahi_ - fzeros $ahi - ld [%o5+0],$nlo_ ! load n[j] as pair of 32-bit words - fzeros $nlo - ld [%o5+4],$nhi_ - fzeros $nhi - - fxtod $alo,$alo - fxtod $ahi,$ahi - fxtod $nlo,$nlo - fxtod $nhi,$nhi - - ldx [%sp+$bias+$frame+0],%o0 - fmuld $alo,$ba,$aloa - ldx [%sp+$bias+$frame+8],%o1 - fmuld $nlo,$na,$nloa - ldx [%sp+$bias+$frame+16],%o2 - fmuld $alo,$bb,$alob - ldx [%sp+$bias+$frame+24],%o3 - fmuld $nlo,$nb,$nlob - - srlx %o0,16,%o7 - std $alo,[$ap_l+$j] ! save smashed ap[j] in double format - fmuld $alo,$bc,$aloc - add %o7,%o1,%o1 - std $ahi,[$ap_h+$j] - faddd $aloa,$nloa,$nloa - fmuld $nlo,$nc,$nloc - srlx %o1,16,%o7 - std $nlo,[$np_l+$j] ! save smashed np[j] in double format - fmuld $alo,$bd,$alod - add %o7,%o2,%o2 - std $nhi,[$np_h+$j] - faddd $alob,$nlob,$nlob - fmuld $nlo,$nd,$nlod - srlx %o2,16,%o7 - fmuld $ahi,$ba,$ahia - add %o7,%o3,%o3 ! %o3.%o2[0..15].%o1[0..15].%o0[0..15] - and %o0,$mask,%o0 - faddd $aloc,$nloc,$nloc - fmuld $nhi,$na,$nhia - and %o1,$mask,%o1 - and %o2,$mask,%o2 - fmuld $ahi,$bb,$ahib - sllx %o1,16,%o1 - faddd $alod,$nlod,$nlod - fmuld $nhi,$nb,$nhib - sllx %o2,32,%o2 - fmuld $ahi,$bc,$ahic - sllx %o3,48,%o7 - or %o1,%o0,%o0 - faddd $ahia,$nhia,$nhia - fmuld $nhi,$nc,$nhic - or %o2,%o0,%o0 - fmuld $ahi,$bd,$ahid - or %o7,%o0,%o0 ! 64-bit result - faddd $ahib,$nhib,$nhib - fmuld $nhi,$nd,$nhid - addcc %g1,%o0,%o0 - faddd $dota,$nloa,$nloa - srlx %o3,16,%g1 ! 34-bit carry - faddd $dotb,$nlob,$nlob - bcs,a %xcc,.+8 - add %g1,1,%g1 - - stx %o0,[$tp] ! tp[j-1]= - - faddd $ahic,$nhic,$dota ! $nhic - faddd $ahid,$nhid,$dotb ! $nhid - - faddd $nloc,$nhia,$nloc - faddd $nlod,$nhib,$nlod - - fdtox $nloa,$nloa - fdtox $nlob,$nlob - fdtox $nloc,$nloc - fdtox $nlod,$nlod - - std $nloa,[%sp+$bias+$frame+0] - std $nlob,[%sp+$bias+$frame+8] - std $nloc,[%sp+$bias+$frame+16] - std $nlod,[%sp+$bias+$frame+24] - - addcc $j,8,$j - bnz,pt %icc,.L1st - add $tp,8,$tp - -.L1stskip: - fdtox $dota,$dota - fdtox $dotb,$dotb - - ldx [%sp+$bias+$frame+0],%o0 - ldx [%sp+$bias+$frame+8],%o1 - ldx [%sp+$bias+$frame+16],%o2 - ldx [%sp+$bias+$frame+24],%o3 - - srlx %o0,16,%o7 - std $dota,[%sp+$bias+$frame+32] - add %o7,%o1,%o1 - std $dotb,[%sp+$bias+$frame+40] - srlx %o1,16,%o7 - add %o7,%o2,%o2 - srlx %o2,16,%o7 - add %o7,%o3,%o3 ! %o3.%o2[0..15].%o1[0..15].%o0[0..15] - and %o0,$mask,%o0 - and %o1,$mask,%o1 - and %o2,$mask,%o2 - sllx %o1,16,%o1 - sllx %o2,32,%o2 - sllx %o3,48,%o7 - or %o1,%o0,%o0 - or %o2,%o0,%o0 - or %o7,%o0,%o0 ! 64-bit result - ldx [%sp+$bias+$frame+32],%o4 - addcc %g1,%o0,%o0 - ldx [%sp+$bias+$frame+40],%o5 - srlx %o3,16,%g1 ! 34-bit carry - bcs,a %xcc,.+8 - add %g1,1,%g1 - - stx %o0,[$tp] ! tp[j-1]= - add $tp,8,$tp - - srlx %o4,16,%o7 - add %o7,%o5,%o5 - and %o4,$mask,%o4 - sllx %o5,16,%o7 - or %o7,%o4,%o4 - addcc %g1,%o4,%o4 - srlx %o5,48,%g1 - bcs,a %xcc,.+8 - add %g1,1,%g1 - - mov %g1,$carry - stx %o4,[$tp] ! tp[num-1]= - - ba .Louter - add $i,8,$i -.align 32 -.Louter: - sub %g0,$num,$j ! j=-num - add %sp,$bias+$frame+$locals,$tp - - add $ap,$j,%o3 - add $bp,$i,%o4 - - ld [%o3+4],%g1 ! bp[i] - ld [%o3+0],%o0 - ld [%o4+4],%g5 ! ap[0] - sllx %g1,32,%g1 - ld [%o4+0],%o1 - sllx %g5,32,%g5 - or %g1,%o0,%o0 - or %g5,%o1,%o1 - - ldx [$tp],%o2 ! tp[0] - mulx %o1,%o0,%o0 - addcc %o2,%o0,%o0 - mulx $n0,%o0,%o0 ! (ap[0]*bp[i]+t[0])*n0 - stx %o0,[%sp+$bias+$frame+0] - - ! transfer b[i] to FPU as 4x16-bit values - ldda [%o4+2]%asi,$ba - ldda [%o4+0]%asi,$bb - ldda [%o4+6]%asi,$bc - ldda [%o4+4]%asi,$bd - - ! transfer (ap[0]*b[i]+t[0])*n0 to FPU as 4x16-bit values - ldda [%sp+$bias+$frame+6]%asi,$na - fxtod $ba,$ba - ldda [%sp+$bias+$frame+4]%asi,$nb - fxtod $bb,$bb - ldda [%sp+$bias+$frame+2]%asi,$nc - fxtod $bc,$bc - ldda [%sp+$bias+$frame+0]%asi,$nd - fxtod $bd,$bd - ldd [$ap_l+$j],$alo ! load a[j] in double format - fxtod $na,$na - ldd [$ap_h+$j],$ahi - fxtod $nb,$nb - ldd [$np_l+$j],$nlo ! load n[j] in double format - fxtod $nc,$nc - ldd [$np_h+$j],$nhi - fxtod $nd,$nd - - fmuld $alo,$ba,$aloa - fmuld $nlo,$na,$nloa - fmuld $alo,$bb,$alob - fmuld $nlo,$nb,$nlob - fmuld $alo,$bc,$aloc - faddd $aloa,$nloa,$nloa - fmuld $nlo,$nc,$nloc - fmuld $alo,$bd,$alod - faddd $alob,$nlob,$nlob - fmuld $nlo,$nd,$nlod - fmuld $ahi,$ba,$ahia - faddd $aloc,$nloc,$nloc - fmuld $nhi,$na,$nhia - fmuld $ahi,$bb,$ahib - faddd $alod,$nlod,$nlod - fmuld $nhi,$nb,$nhib - fmuld $ahi,$bc,$ahic - faddd $ahia,$nhia,$nhia - fmuld $nhi,$nc,$nhic - fmuld $ahi,$bd,$ahid - faddd $ahib,$nhib,$nhib - fmuld $nhi,$nd,$nhid - - faddd $ahic,$nhic,$dota ! $nhic - faddd $ahid,$nhid,$dotb ! $nhid - - faddd $nloc,$nhia,$nloc - faddd $nlod,$nhib,$nlod - - fdtox $nloa,$nloa - fdtox $nlob,$nlob - fdtox $nloc,$nloc - fdtox $nlod,$nlod - - std $nloa,[%sp+$bias+$frame+0] - std $nlob,[%sp+$bias+$frame+8] - std $nloc,[%sp+$bias+$frame+16] - add $j,8,$j - std $nlod,[%sp+$bias+$frame+24] - - ldd [$ap_l+$j],$alo ! load a[j] in double format - ldd [$ap_h+$j],$ahi - ldd [$np_l+$j],$nlo ! load n[j] in double format - ldd [$np_h+$j],$nhi - - fmuld $alo,$ba,$aloa - fmuld $nlo,$na,$nloa - fmuld $alo,$bb,$alob - fmuld $nlo,$nb,$nlob - fmuld $alo,$bc,$aloc - ldx [%sp+$bias+$frame+0],%o0 - faddd $aloa,$nloa,$nloa - fmuld $nlo,$nc,$nloc - ldx [%sp+$bias+$frame+8],%o1 - fmuld $alo,$bd,$alod - ldx [%sp+$bias+$frame+16],%o2 - faddd $alob,$nlob,$nlob - fmuld $nlo,$nd,$nlod - ldx [%sp+$bias+$frame+24],%o3 - fmuld $ahi,$ba,$ahia - - srlx %o0,16,%o7 - faddd $aloc,$nloc,$nloc - fmuld $nhi,$na,$nhia - add %o7,%o1,%o1 - fmuld $ahi,$bb,$ahib - srlx %o1,16,%o7 - faddd $alod,$nlod,$nlod - fmuld $nhi,$nb,$nhib - add %o7,%o2,%o2 - fmuld $ahi,$bc,$ahic - srlx %o2,16,%o7 - faddd $ahia,$nhia,$nhia - fmuld $nhi,$nc,$nhic - add %o7,%o3,%o3 ! %o3.%o2[0..15].%o1[0..15].%o0[0..15] - ! why? - and %o0,$mask,%o0 - fmuld $ahi,$bd,$ahid - and %o1,$mask,%o1 - and %o2,$mask,%o2 - faddd $ahib,$nhib,$nhib - fmuld $nhi,$nd,$nhid - sllx %o1,16,%o1 - faddd $dota,$nloa,$nloa - sllx %o2,32,%o2 - faddd $dotb,$nlob,$nlob - sllx %o3,48,%o7 - or %o1,%o0,%o0 - faddd $ahic,$nhic,$dota ! $nhic - or %o2,%o0,%o0 - faddd $ahid,$nhid,$dotb ! $nhid - or %o7,%o0,%o0 ! 64-bit result - ldx [$tp],%o7 - faddd $nloc,$nhia,$nloc - addcc %o7,%o0,%o0 - ! end-of-why? - faddd $nlod,$nhib,$nlod - srlx %o3,16,%g1 ! 34-bit carry - fdtox $nloa,$nloa - bcs,a %xcc,.+8 - add %g1,1,%g1 - - fdtox $nlob,$nlob - fdtox $nloc,$nloc - fdtox $nlod,$nlod - - std $nloa,[%sp+$bias+$frame+0] - std $nlob,[%sp+$bias+$frame+8] - addcc $j,8,$j - std $nloc,[%sp+$bias+$frame+16] - bz,pn %icc,.Linnerskip - std $nlod,[%sp+$bias+$frame+24] - - ba .Linner - nop -.align 32 -.Linner: - ldd [$ap_l+$j],$alo ! load a[j] in double format - ldd [$ap_h+$j],$ahi - ldd [$np_l+$j],$nlo ! load n[j] in double format - ldd [$np_h+$j],$nhi - - fmuld $alo,$ba,$aloa - fmuld $nlo,$na,$nloa - fmuld $alo,$bb,$alob - fmuld $nlo,$nb,$nlob - fmuld $alo,$bc,$aloc - ldx [%sp+$bias+$frame+0],%o0 - faddd $aloa,$nloa,$nloa - fmuld $nlo,$nc,$nloc - ldx [%sp+$bias+$frame+8],%o1 - fmuld $alo,$bd,$alod - ldx [%sp+$bias+$frame+16],%o2 - faddd $alob,$nlob,$nlob - fmuld $nlo,$nd,$nlod - ldx [%sp+$bias+$frame+24],%o3 - fmuld $ahi,$ba,$ahia - - srlx %o0,16,%o7 - faddd $aloc,$nloc,$nloc - fmuld $nhi,$na,$nhia - add %o7,%o1,%o1 - fmuld $ahi,$bb,$ahib - srlx %o1,16,%o7 - faddd $alod,$nlod,$nlod - fmuld $nhi,$nb,$nhib - add %o7,%o2,%o2 - fmuld $ahi,$bc,$ahic - srlx %o2,16,%o7 - faddd $ahia,$nhia,$nhia - fmuld $nhi,$nc,$nhic - add %o7,%o3,%o3 ! %o3.%o2[0..15].%o1[0..15].%o0[0..15] - and %o0,$mask,%o0 - fmuld $ahi,$bd,$ahid - and %o1,$mask,%o1 - and %o2,$mask,%o2 - faddd $ahib,$nhib,$nhib - fmuld $nhi,$nd,$nhid - sllx %o1,16,%o1 - faddd $dota,$nloa,$nloa - sllx %o2,32,%o2 - faddd $dotb,$nlob,$nlob - sllx %o3,48,%o7 - or %o1,%o0,%o0 - faddd $ahic,$nhic,$dota ! $nhic - or %o2,%o0,%o0 - faddd $ahid,$nhid,$dotb ! $nhid - or %o7,%o0,%o0 ! 64-bit result - faddd $nloc,$nhia,$nloc - addcc %g1,%o0,%o0 - ldx [$tp+8],%o7 ! tp[j] - faddd $nlod,$nhib,$nlod - srlx %o3,16,%g1 ! 34-bit carry - fdtox $nloa,$nloa - bcs,a %xcc,.+8 - add %g1,1,%g1 - fdtox $nlob,$nlob - addcc %o7,%o0,%o0 - fdtox $nloc,$nloc - bcs,a %xcc,.+8 - add %g1,1,%g1 - - stx %o0,[$tp] ! tp[j-1] - fdtox $nlod,$nlod - - std $nloa,[%sp+$bias+$frame+0] - std $nlob,[%sp+$bias+$frame+8] - std $nloc,[%sp+$bias+$frame+16] - addcc $j,8,$j - std $nlod,[%sp+$bias+$frame+24] - bnz,pt %icc,.Linner - add $tp,8,$tp - -.Linnerskip: - fdtox $dota,$dota - fdtox $dotb,$dotb - - ldx [%sp+$bias+$frame+0],%o0 - ldx [%sp+$bias+$frame+8],%o1 - ldx [%sp+$bias+$frame+16],%o2 - ldx [%sp+$bias+$frame+24],%o3 - - srlx %o0,16,%o7 - std $dota,[%sp+$bias+$frame+32] - add %o7,%o1,%o1 - std $dotb,[%sp+$bias+$frame+40] - srlx %o1,16,%o7 - add %o7,%o2,%o2 - srlx %o2,16,%o7 - add %o7,%o3,%o3 ! %o3.%o2[0..15].%o1[0..15].%o0[0..15] - and %o0,$mask,%o0 - and %o1,$mask,%o1 - and %o2,$mask,%o2 - sllx %o1,16,%o1 - sllx %o2,32,%o2 - sllx %o3,48,%o7 - or %o1,%o0,%o0 - or %o2,%o0,%o0 - ldx [%sp+$bias+$frame+32],%o4 - or %o7,%o0,%o0 ! 64-bit result - ldx [%sp+$bias+$frame+40],%o5 - addcc %g1,%o0,%o0 - ldx [$tp+8],%o7 ! tp[j] - srlx %o3,16,%g1 ! 34-bit carry - bcs,a %xcc,.+8 - add %g1,1,%g1 - - addcc %o7,%o0,%o0 - bcs,a %xcc,.+8 - add %g1,1,%g1 - - stx %o0,[$tp] ! tp[j-1] - add $tp,8,$tp - - srlx %o4,16,%o7 - add %o7,%o5,%o5 - and %o4,$mask,%o4 - sllx %o5,16,%o7 - or %o7,%o4,%o4 - addcc %g1,%o4,%o4 - srlx %o5,48,%g1 - bcs,a %xcc,.+8 - add %g1,1,%g1 - - addcc $carry,%o4,%o4 - stx %o4,[$tp] ! tp[num-1] - mov %g1,$carry - bcs,a %xcc,.+8 - add $carry,1,$carry - - addcc $i,8,$i - bnz %icc,.Louter - nop - - add $tp,8,$tp ! adjust tp to point at the end - orn %g0,%g0,%g4 - sub %g0,$num,%o7 ! n=-num - ba .Lsub - subcc %g0,%g0,%g0 ! clear %icc.c - -.align 32 -.Lsub: - ldx [$tp+%o7],%o0 - add $np,%o7,%g1 - ld [%g1+0],%o2 - ld [%g1+4],%o3 - srlx %o0,32,%o1 - subccc %o0,%o2,%o2 - add $rp,%o7,%g1 - subccc %o1,%o3,%o3 - st %o2,[%g1+0] - add %o7,8,%o7 - brnz,pt %o7,.Lsub - st %o3,[%g1+4] - subc $carry,0,%g4 - sub %g0,$num,%o7 ! n=-num - ba .Lcopy - nop - -.align 32 -.Lcopy: - ldx [$tp+%o7],%o0 - add $rp,%o7,%g1 - ld [%g1+0],%o2 - ld [%g1+4],%o3 - stx %g0,[$tp+%o7] - and %o0,%g4,%o0 - srlx %o0,32,%o1 - andn %o2,%g4,%o2 - andn %o3,%g4,%o3 - or %o2,%o0,%o0 - or %o3,%o1,%o1 - st %o0,[%g1+0] - add %o7,8,%o7 - brnz,pt %o7,.Lcopy - st %o1,[%g1+4] - sub %g0,$num,%o7 ! n=-num - -.Lzap: - stx %g0,[$ap_l+%o7] - stx %g0,[$ap_h+%o7] - stx %g0,[$np_l+%o7] - stx %g0,[$np_h+%o7] - add %o7,8,%o7 - brnz,pt %o7,.Lzap - nop - - ldx [%sp+$bias+$frame+48],%o7 - wr %g0,%o7,%asi ! restore %asi - - mov 1,%i0 -.Lret: - ret - restore -.type $fname,#function -.size $fname,(.-$fname) -.asciz "Montgomery Multipltication for UltraSPARC, CRYPTOGAMS by <appro\@openssl.org>" -.align 32 -___ - -$code =~ s/\`([^\`]*)\`/eval($1)/gem; - -# Below substitution makes it possible to compile without demanding -# VIS extentions on command line, e.g. -xarch=v9 vs. -xarch=v9a. I -# dare to do this, because VIS capability is detected at run-time now -# and this routine is not called on CPU not capable to execute it. Do -# note that fzeros is not the only VIS dependency! Another dependency -# is implicit and is just _a_ numerical value loaded to %asi register, -# which assembler can't recognize as VIS specific... -$code =~ s/fzeros\s+%f([0-9]+)/ - sprintf(".word\t0x%x\t! fzeros %%f%d",0x81b00c20|($1<<25),$1) - /gem; - -print $code; -# flush -close STDOUT; diff --git a/app/openssl/crypto/bn/asm/via-mont.pl b/app/openssl/crypto/bn/asm/via-mont.pl deleted file mode 100644 index c046a514..00000000 --- a/app/openssl/crypto/bn/asm/via-mont.pl +++ /dev/null @@ -1,242 +0,0 @@ -#!/usr/bin/env perl -# -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== -# -# Wrapper around 'rep montmul', VIA-specific instruction accessing -# PadLock Montgomery Multiplier. The wrapper is designed as drop-in -# replacement for OpenSSL bn_mul_mont [first implemented in 0.9.9]. -# -# Below are interleaved outputs from 'openssl speed rsa dsa' for 4 -# different software configurations on 1.5GHz VIA Esther processor. -# Lines marked with "software integer" denote performance of hand- -# coded integer-only assembler found in OpenSSL 0.9.7. "Software SSE2" -# refers to hand-coded SSE2 Montgomery multiplication procedure found -# OpenSSL 0.9.9. "Hardware VIA SDK" refers to padlock_pmm routine from -# Padlock SDK 2.0.1 available for download from VIA, which naturally -# utilizes the magic 'repz montmul' instruction. And finally "hardware -# this" refers to *this* implementation which also uses 'repz montmul' -# -# sign verify sign/s verify/s -# rsa 512 bits 0.001720s 0.000140s 581.4 7149.7 software integer -# rsa 512 bits 0.000690s 0.000086s 1450.3 11606.0 software SSE2 -# rsa 512 bits 0.006136s 0.000201s 163.0 4974.5 hardware VIA SDK -# rsa 512 bits 0.000712s 0.000050s 1404.9 19858.5 hardware this -# -# rsa 1024 bits 0.008518s 0.000413s 117.4 2420.8 software integer -# rsa 1024 bits 0.004275s 0.000277s 233.9 3609.7 software SSE2 -# rsa 1024 bits 0.012136s 0.000260s 82.4 3844.5 hardware VIA SDK -# rsa 1024 bits 0.002522s 0.000116s 396.5 8650.9 hardware this -# -# rsa 2048 bits 0.050101s 0.001371s 20.0 729.6 software integer -# rsa 2048 bits 0.030273s 0.001008s 33.0 991.9 software SSE2 -# rsa 2048 bits 0.030833s 0.000976s 32.4 1025.1 hardware VIA SDK -# rsa 2048 bits 0.011879s 0.000342s 84.2 2921.7 hardware this -# -# rsa 4096 bits 0.327097s 0.004859s 3.1 205.8 software integer -# rsa 4096 bits 0.229318s 0.003859s 4.4 259.2 software SSE2 -# rsa 4096 bits 0.233953s 0.003274s 4.3 305.4 hardware VIA SDK -# rsa 4096 bits 0.070493s 0.001166s 14.2 857.6 hardware this -# -# dsa 512 bits 0.001342s 0.001651s 745.2 605.7 software integer -# dsa 512 bits 0.000844s 0.000987s 1185.3 1013.1 software SSE2 -# dsa 512 bits 0.001902s 0.002247s 525.6 444.9 hardware VIA SDK -# dsa 512 bits 0.000458s 0.000524s 2182.2 1909.1 hardware this -# -# dsa 1024 bits 0.003964s 0.004926s 252.3 203.0 software integer -# dsa 1024 bits 0.002686s 0.003166s 372.3 315.8 software SSE2 -# dsa 1024 bits 0.002397s 0.002823s 417.1 354.3 hardware VIA SDK -# dsa 1024 bits 0.000978s 0.001170s 1022.2 855.0 hardware this -# -# dsa 2048 bits 0.013280s 0.016518s 75.3 60.5 software integer -# dsa 2048 bits 0.009911s 0.011522s 100.9 86.8 software SSE2 -# dsa 2048 bits 0.009542s 0.011763s 104.8 85.0 hardware VIA SDK -# dsa 2048 bits 0.002884s 0.003352s 346.8 298.3 hardware this -# -# To give you some other reference point here is output for 2.4GHz P4 -# running hand-coded SSE2 bn_mul_mont found in 0.9.9, i.e. "software -# SSE2" in above terms. -# -# rsa 512 bits 0.000407s 0.000047s 2454.2 21137.0 -# rsa 1024 bits 0.002426s 0.000141s 412.1 7100.0 -# rsa 2048 bits 0.015046s 0.000491s 66.5 2034.9 -# rsa 4096 bits 0.109770s 0.002379s 9.1 420.3 -# dsa 512 bits 0.000438s 0.000525s 2281.1 1904.1 -# dsa 1024 bits 0.001346s 0.001595s 742.7 627.0 -# dsa 2048 bits 0.004745s 0.005582s 210.7 179.1 -# -# Conclusions: -# - VIA SDK leaves a *lot* of room for improvement (which this -# implementation successfully fills:-); -# - 'rep montmul' gives up to >3x performance improvement depending on -# key length; -# - in terms of absolute performance it delivers approximately as much -# as modern out-of-order 32-bit cores [again, for longer keys]. - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -push(@INC,"${dir}","${dir}../../perlasm"); -require "x86asm.pl"; - -&asm_init($ARGV[0],"via-mont.pl"); - -# int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0, int num); -$func="bn_mul_mont_padlock"; - -$pad=16*1; # amount of reserved bytes on top of every vector - -# stack layout -$mZeroPrime=&DWP(0,"esp"); # these are specified by VIA -$A=&DWP(4,"esp"); -$B=&DWP(8,"esp"); -$T=&DWP(12,"esp"); -$M=&DWP(16,"esp"); -$scratch=&DWP(20,"esp"); -$rp=&DWP(24,"esp"); # these are mine -$sp=&DWP(28,"esp"); -# &DWP(32,"esp") # 32 byte scratch area -# &DWP(64+(4*$num+$pad)*0,"esp") # padded tp[num] -# &DWP(64+(4*$num+$pad)*1,"esp") # padded copy of ap[num] -# &DWP(64+(4*$num+$pad)*2,"esp") # padded copy of bp[num] -# &DWP(64+(4*$num+$pad)*3,"esp") # padded copy of np[num] -# Note that SDK suggests to unconditionally allocate 2K per vector. This -# has quite an impact on performance. It naturally depends on key length, -# but to give an example 1024 bit private RSA key operations suffer >30% -# penalty. I allocate only as much as actually required... - -&function_begin($func); - &xor ("eax","eax"); - &mov ("ecx",&wparam(5)); # num - # meet VIA's limitations for num [note that the specification - # expresses them in bits, while we work with amount of 32-bit words] - &test ("ecx",3); - &jnz (&label("leave")); # num % 4 != 0 - &cmp ("ecx",8); - &jb (&label("leave")); # num < 8 - &cmp ("ecx",1024); - &ja (&label("leave")); # num > 1024 - - &pushf (); - &cld (); - - &mov ("edi",&wparam(0)); # rp - &mov ("eax",&wparam(1)); # ap - &mov ("ebx",&wparam(2)); # bp - &mov ("edx",&wparam(3)); # np - &mov ("esi",&wparam(4)); # n0 - &mov ("esi",&DWP(0,"esi")); # *n0 - - &lea ("ecx",&DWP($pad,"","ecx",4)); # ecx becomes vector size in bytes - &lea ("ebp",&DWP(64,"","ecx",4)); # allocate 4 vectors + 64 bytes - &neg ("ebp"); - &add ("ebp","esp"); - &and ("ebp",-64); # align to cache-line - &xchg ("ebp","esp"); # alloca - - &mov ($rp,"edi"); # save rp - &mov ($sp,"ebp"); # save esp - - &mov ($mZeroPrime,"esi"); - &lea ("esi",&DWP(64,"esp")); # tp - &mov ($T,"esi"); - &lea ("edi",&DWP(32,"esp")); # scratch area - &mov ($scratch,"edi"); - &mov ("esi","eax"); - - &lea ("ebp",&DWP(-$pad,"ecx")); - &shr ("ebp",2); # restore original num value in ebp - - &xor ("eax","eax"); - - &mov ("ecx","ebp"); - &lea ("ecx",&DWP((32+$pad)/4,"ecx"));# padded tp + scratch - &data_byte(0xf3,0xab); # rep stosl, bzero - - &mov ("ecx","ebp"); - &lea ("edi",&DWP(64+$pad,"esp","ecx",4));# pointer to ap copy - &mov ($A,"edi"); - &data_byte(0xf3,0xa5); # rep movsl, memcpy - &mov ("ecx",$pad/4); - &data_byte(0xf3,0xab); # rep stosl, bzero pad - # edi points at the end of padded ap copy... - - &mov ("ecx","ebp"); - &mov ("esi","ebx"); - &mov ($B,"edi"); - &data_byte(0xf3,0xa5); # rep movsl, memcpy - &mov ("ecx",$pad/4); - &data_byte(0xf3,0xab); # rep stosl, bzero pad - # edi points at the end of padded bp copy... - - &mov ("ecx","ebp"); - &mov ("esi","edx"); - &mov ($M,"edi"); - &data_byte(0xf3,0xa5); # rep movsl, memcpy - &mov ("ecx",$pad/4); - &data_byte(0xf3,0xab); # rep stosl, bzero pad - # edi points at the end of padded np copy... - - # let magic happen... - &mov ("ecx","ebp"); - &mov ("esi","esp"); - &shl ("ecx",5); # convert word counter to bit counter - &align (4); - &data_byte(0xf3,0x0f,0xa6,0xc0);# rep montmul - - &mov ("ecx","ebp"); - &lea ("esi",&DWP(64,"esp")); # tp - # edi still points at the end of padded np copy... - &neg ("ebp"); - &lea ("ebp",&DWP(-$pad,"edi","ebp",4)); # so just "rewind" - &mov ("edi",$rp); # restore rp - &xor ("edx","edx"); # i=0 and clear CF - -&set_label("sub",8); - &mov ("eax",&DWP(0,"esi","edx",4)); - &sbb ("eax",&DWP(0,"ebp","edx",4)); - &mov (&DWP(0,"edi","edx",4),"eax"); # rp[i]=tp[i]-np[i] - &lea ("edx",&DWP(1,"edx")); # i++ - &loop (&label("sub")); # doesn't affect CF! - - &mov ("eax",&DWP(0,"esi","edx",4)); # upmost overflow bit - &sbb ("eax",0); - &and ("esi","eax"); - ¬ ("eax"); - &mov ("ebp","edi"); - &and ("ebp","eax"); - &or ("esi","ebp"); # tp=carry?tp:rp - - &mov ("ecx","edx"); # num - &xor ("edx","edx"); # i=0 - -&set_label("copy",8); - &mov ("eax",&DWP(0,"esi","edx",4)); - &mov (&DWP(64,"esp","edx",4),"ecx"); # zap tp - &mov (&DWP(0,"edi","edx",4),"eax"); - &lea ("edx",&DWP(1,"edx")); # i++ - &loop (&label("copy")); - - &mov ("ebp",$sp); - &xor ("eax","eax"); - - &mov ("ecx",64/4); - &mov ("edi","esp"); # zap frame including scratch area - &data_byte(0xf3,0xab); # rep stosl, bzero - - # zap copies of ap, bp and np - &lea ("edi",&DWP(64+$pad,"esp","edx",4));# pointer to ap - &lea ("ecx",&DWP(3*$pad/4,"edx","edx",2)); - &data_byte(0xf3,0xab); # rep stosl, bzero - - &mov ("esp","ebp"); - &inc ("eax"); # signal "done" - &popf (); -&set_label("leave"); -&function_end($func); - -&asciz("Padlock Montgomery Multiplication, CRYPTOGAMS by <appro\@openssl.org>"); - -&asm_finish(); diff --git a/app/openssl/crypto/bn/asm/x86-mont.pl b/app/openssl/crypto/bn/asm/x86-mont.pl deleted file mode 100755 index 5cd3cd2e..00000000 --- a/app/openssl/crypto/bn/asm/x86-mont.pl +++ /dev/null @@ -1,591 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# October 2005 -# -# This is a "teaser" code, as it can be improved in several ways... -# First of all non-SSE2 path should be implemented (yes, for now it -# performs Montgomery multiplication/convolution only on SSE2-capable -# CPUs such as P4, others fall down to original code). Then inner loop -# can be unrolled and modulo-scheduled to improve ILP and possibly -# moved to 128-bit XMM register bank (though it would require input -# rearrangement and/or increase bus bandwidth utilization). Dedicated -# squaring procedure should give further performance improvement... -# Yet, for being draft, the code improves rsa512 *sign* benchmark by -# 110%(!), rsa1024 one - by 70% and rsa4096 - by 20%:-) - -# December 2006 -# -# Modulo-scheduling SSE2 loops results in further 15-20% improvement. -# Integer-only code [being equipped with dedicated squaring procedure] -# gives ~40% on rsa512 sign benchmark... - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -push(@INC,"${dir}","${dir}../../perlasm"); -require "x86asm.pl"; - -&asm_init($ARGV[0],$0); - -$sse2=0; -for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); } - -&external_label("OPENSSL_ia32cap_P") if ($sse2); - -&function_begin("bn_mul_mont"); - -$i="edx"; -$j="ecx"; -$ap="esi"; $tp="esi"; # overlapping variables!!! -$rp="edi"; $bp="edi"; # overlapping variables!!! -$np="ebp"; -$num="ebx"; - -$_num=&DWP(4*0,"esp"); # stack top layout -$_rp=&DWP(4*1,"esp"); -$_ap=&DWP(4*2,"esp"); -$_bp=&DWP(4*3,"esp"); -$_np=&DWP(4*4,"esp"); -$_n0=&DWP(4*5,"esp"); $_n0q=&QWP(4*5,"esp"); -$_sp=&DWP(4*6,"esp"); -$_bpend=&DWP(4*7,"esp"); -$frame=32; # size of above frame rounded up to 16n - - &xor ("eax","eax"); - &mov ("edi",&wparam(5)); # int num - &cmp ("edi",4); - &jl (&label("just_leave")); - - &lea ("esi",&wparam(0)); # put aside pointer to argument block - &lea ("edx",&wparam(1)); # load ap - &mov ("ebp","esp"); # saved stack pointer! - &add ("edi",2); # extra two words on top of tp - &neg ("edi"); - &lea ("esp",&DWP(-$frame,"esp","edi",4)); # alloca($frame+4*(num+2)) - &neg ("edi"); - - # minimize cache contention by arraning 2K window between stack - # pointer and ap argument [np is also position sensitive vector, - # but it's assumed to be near ap, as it's allocated at ~same - # time]. - &mov ("eax","esp"); - &sub ("eax","edx"); - &and ("eax",2047); - &sub ("esp","eax"); # this aligns sp and ap modulo 2048 - - &xor ("edx","esp"); - &and ("edx",2048); - &xor ("edx",2048); - &sub ("esp","edx"); # this splits them apart modulo 4096 - - &and ("esp",-64); # align to cache line - - ################################# load argument block... - &mov ("eax",&DWP(0*4,"esi"));# BN_ULONG *rp - &mov ("ebx",&DWP(1*4,"esi"));# const BN_ULONG *ap - &mov ("ecx",&DWP(2*4,"esi"));# const BN_ULONG *bp - &mov ("edx",&DWP(3*4,"esi"));# const BN_ULONG *np - &mov ("esi",&DWP(4*4,"esi"));# const BN_ULONG *n0 - #&mov ("edi",&DWP(5*4,"esi"));# int num - - &mov ("esi",&DWP(0,"esi")); # pull n0[0] - &mov ($_rp,"eax"); # ... save a copy of argument block - &mov ($_ap,"ebx"); - &mov ($_bp,"ecx"); - &mov ($_np,"edx"); - &mov ($_n0,"esi"); - &lea ($num,&DWP(-3,"edi")); # num=num-1 to assist modulo-scheduling - #&mov ($_num,$num); # redundant as $num is not reused - &mov ($_sp,"ebp"); # saved stack pointer! - -if($sse2) { -$acc0="mm0"; # mmx register bank layout -$acc1="mm1"; -$car0="mm2"; -$car1="mm3"; -$mul0="mm4"; -$mul1="mm5"; -$temp="mm6"; -$mask="mm7"; - - &picmeup("eax","OPENSSL_ia32cap_P"); - &bt (&DWP(0,"eax"),26); - &jnc (&label("non_sse2")); - - &mov ("eax",-1); - &movd ($mask,"eax"); # mask 32 lower bits - - &mov ($ap,$_ap); # load input pointers - &mov ($bp,$_bp); - &mov ($np,$_np); - - &xor ($i,$i); # i=0 - &xor ($j,$j); # j=0 - - &movd ($mul0,&DWP(0,$bp)); # bp[0] - &movd ($mul1,&DWP(0,$ap)); # ap[0] - &movd ($car1,&DWP(0,$np)); # np[0] - - &pmuludq($mul1,$mul0); # ap[0]*bp[0] - &movq ($car0,$mul1); - &movq ($acc0,$mul1); # I wish movd worked for - &pand ($acc0,$mask); # inter-register transfers - - &pmuludq($mul1,$_n0q); # *=n0 - - &pmuludq($car1,$mul1); # "t[0]"*np[0]*n0 - &paddq ($car1,$acc0); - - &movd ($acc1,&DWP(4,$np)); # np[1] - &movd ($acc0,&DWP(4,$ap)); # ap[1] - - &psrlq ($car0,32); - &psrlq ($car1,32); - - &inc ($j); # j++ -&set_label("1st",16); - &pmuludq($acc0,$mul0); # ap[j]*bp[0] - &pmuludq($acc1,$mul1); # np[j]*m1 - &paddq ($car0,$acc0); # +=c0 - &paddq ($car1,$acc1); # +=c1 - - &movq ($acc0,$car0); - &pand ($acc0,$mask); - &movd ($acc1,&DWP(4,$np,$j,4)); # np[j+1] - &paddq ($car1,$acc0); # +=ap[j]*bp[0]; - &movd ($acc0,&DWP(4,$ap,$j,4)); # ap[j+1] - &psrlq ($car0,32); - &movd (&DWP($frame-4,"esp",$j,4),$car1); # tp[j-1]= - &psrlq ($car1,32); - - &lea ($j,&DWP(1,$j)); - &cmp ($j,$num); - &jl (&label("1st")); - - &pmuludq($acc0,$mul0); # ap[num-1]*bp[0] - &pmuludq($acc1,$mul1); # np[num-1]*m1 - &paddq ($car0,$acc0); # +=c0 - &paddq ($car1,$acc1); # +=c1 - - &movq ($acc0,$car0); - &pand ($acc0,$mask); - &paddq ($car1,$acc0); # +=ap[num-1]*bp[0]; - &movd (&DWP($frame-4,"esp",$j,4),$car1); # tp[num-2]= - - &psrlq ($car0,32); - &psrlq ($car1,32); - - &paddq ($car1,$car0); - &movq (&QWP($frame,"esp",$num,4),$car1); # tp[num].tp[num-1] - - &inc ($i); # i++ -&set_label("outer"); - &xor ($j,$j); # j=0 - - &movd ($mul0,&DWP(0,$bp,$i,4)); # bp[i] - &movd ($mul1,&DWP(0,$ap)); # ap[0] - &movd ($temp,&DWP($frame,"esp")); # tp[0] - &movd ($car1,&DWP(0,$np)); # np[0] - &pmuludq($mul1,$mul0); # ap[0]*bp[i] - - &paddq ($mul1,$temp); # +=tp[0] - &movq ($acc0,$mul1); - &movq ($car0,$mul1); - &pand ($acc0,$mask); - - &pmuludq($mul1,$_n0q); # *=n0 - - &pmuludq($car1,$mul1); - &paddq ($car1,$acc0); - - &movd ($temp,&DWP($frame+4,"esp")); # tp[1] - &movd ($acc1,&DWP(4,$np)); # np[1] - &movd ($acc0,&DWP(4,$ap)); # ap[1] - - &psrlq ($car0,32); - &psrlq ($car1,32); - &paddq ($car0,$temp); # +=tp[1] - - &inc ($j); # j++ - &dec ($num); -&set_label("inner"); - &pmuludq($acc0,$mul0); # ap[j]*bp[i] - &pmuludq($acc1,$mul1); # np[j]*m1 - &paddq ($car0,$acc0); # +=c0 - &paddq ($car1,$acc1); # +=c1 - - &movq ($acc0,$car0); - &movd ($temp,&DWP($frame+4,"esp",$j,4));# tp[j+1] - &pand ($acc0,$mask); - &movd ($acc1,&DWP(4,$np,$j,4)); # np[j+1] - &paddq ($car1,$acc0); # +=ap[j]*bp[i]+tp[j] - &movd ($acc0,&DWP(4,$ap,$j,4)); # ap[j+1] - &psrlq ($car0,32); - &movd (&DWP($frame-4,"esp",$j,4),$car1);# tp[j-1]= - &psrlq ($car1,32); - &paddq ($car0,$temp); # +=tp[j+1] - - &dec ($num); - &lea ($j,&DWP(1,$j)); # j++ - &jnz (&label("inner")); - - &mov ($num,$j); - &pmuludq($acc0,$mul0); # ap[num-1]*bp[i] - &pmuludq($acc1,$mul1); # np[num-1]*m1 - &paddq ($car0,$acc0); # +=c0 - &paddq ($car1,$acc1); # +=c1 - - &movq ($acc0,$car0); - &pand ($acc0,$mask); - &paddq ($car1,$acc0); # +=ap[num-1]*bp[i]+tp[num-1] - &movd (&DWP($frame-4,"esp",$j,4),$car1); # tp[num-2]= - &psrlq ($car0,32); - &psrlq ($car1,32); - - &movd ($temp,&DWP($frame+4,"esp",$num,4)); # += tp[num] - &paddq ($car1,$car0); - &paddq ($car1,$temp); - &movq (&QWP($frame,"esp",$num,4),$car1); # tp[num].tp[num-1] - - &lea ($i,&DWP(1,$i)); # i++ - &cmp ($i,$num); - &jle (&label("outer")); - - &emms (); # done with mmx bank - &jmp (&label("common_tail")); - -&set_label("non_sse2",16); -} - -if (0) { - &mov ("esp",$_sp); - &xor ("eax","eax"); # signal "not fast enough [yet]" - &jmp (&label("just_leave")); - # While the below code provides competitive performance for - # all key lengthes on modern Intel cores, it's still more - # than 10% slower for 4096-bit key elsewhere:-( "Competitive" - # means compared to the original integer-only assembler. - # 512-bit RSA sign is better by ~40%, but that's about all - # one can say about all CPUs... -} else { -$inp="esi"; # integer path uses these registers differently -$word="edi"; -$carry="ebp"; - - &mov ($inp,$_ap); - &lea ($carry,&DWP(1,$num)); - &mov ($word,$_bp); - &xor ($j,$j); # j=0 - &mov ("edx",$inp); - &and ($carry,1); # see if num is even - &sub ("edx",$word); # see if ap==bp - &lea ("eax",&DWP(4,$word,$num,4)); # &bp[num] - &or ($carry,"edx"); - &mov ($word,&DWP(0,$word)); # bp[0] - &jz (&label("bn_sqr_mont")); - &mov ($_bpend,"eax"); - &mov ("eax",&DWP(0,$inp)); - &xor ("edx","edx"); - -&set_label("mull",16); - &mov ($carry,"edx"); - &mul ($word); # ap[j]*bp[0] - &add ($carry,"eax"); - &lea ($j,&DWP(1,$j)); - &adc ("edx",0); - &mov ("eax",&DWP(0,$inp,$j,4)); # ap[j+1] - &cmp ($j,$num); - &mov (&DWP($frame-4,"esp",$j,4),$carry); # tp[j]= - &jl (&label("mull")); - - &mov ($carry,"edx"); - &mul ($word); # ap[num-1]*bp[0] - &mov ($word,$_n0); - &add ("eax",$carry); - &mov ($inp,$_np); - &adc ("edx",0); - &imul ($word,&DWP($frame,"esp")); # n0*tp[0] - - &mov (&DWP($frame,"esp",$num,4),"eax"); # tp[num-1]= - &xor ($j,$j); - &mov (&DWP($frame+4,"esp",$num,4),"edx"); # tp[num]= - &mov (&DWP($frame+8,"esp",$num,4),$j); # tp[num+1]= - - &mov ("eax",&DWP(0,$inp)); # np[0] - &mul ($word); # np[0]*m - &add ("eax",&DWP($frame,"esp")); # +=tp[0] - &mov ("eax",&DWP(4,$inp)); # np[1] - &adc ("edx",0); - &inc ($j); - - &jmp (&label("2ndmadd")); - -&set_label("1stmadd",16); - &mov ($carry,"edx"); - &mul ($word); # ap[j]*bp[i] - &add ($carry,&DWP($frame,"esp",$j,4)); # +=tp[j] - &lea ($j,&DWP(1,$j)); - &adc ("edx",0); - &add ($carry,"eax"); - &mov ("eax",&DWP(0,$inp,$j,4)); # ap[j+1] - &adc ("edx",0); - &cmp ($j,$num); - &mov (&DWP($frame-4,"esp",$j,4),$carry); # tp[j]= - &jl (&label("1stmadd")); - - &mov ($carry,"edx"); - &mul ($word); # ap[num-1]*bp[i] - &add ("eax",&DWP($frame,"esp",$num,4)); # +=tp[num-1] - &mov ($word,$_n0); - &adc ("edx",0); - &mov ($inp,$_np); - &add ($carry,"eax"); - &adc ("edx",0); - &imul ($word,&DWP($frame,"esp")); # n0*tp[0] - - &xor ($j,$j); - &add ("edx",&DWP($frame+4,"esp",$num,4)); # carry+=tp[num] - &mov (&DWP($frame,"esp",$num,4),$carry); # tp[num-1]= - &adc ($j,0); - &mov ("eax",&DWP(0,$inp)); # np[0] - &mov (&DWP($frame+4,"esp",$num,4),"edx"); # tp[num]= - &mov (&DWP($frame+8,"esp",$num,4),$j); # tp[num+1]= - - &mul ($word); # np[0]*m - &add ("eax",&DWP($frame,"esp")); # +=tp[0] - &mov ("eax",&DWP(4,$inp)); # np[1] - &adc ("edx",0); - &mov ($j,1); - -&set_label("2ndmadd",16); - &mov ($carry,"edx"); - &mul ($word); # np[j]*m - &add ($carry,&DWP($frame,"esp",$j,4)); # +=tp[j] - &lea ($j,&DWP(1,$j)); - &adc ("edx",0); - &add ($carry,"eax"); - &mov ("eax",&DWP(0,$inp,$j,4)); # np[j+1] - &adc ("edx",0); - &cmp ($j,$num); - &mov (&DWP($frame-8,"esp",$j,4),$carry); # tp[j-1]= - &jl (&label("2ndmadd")); - - &mov ($carry,"edx"); - &mul ($word); # np[j]*m - &add ($carry,&DWP($frame,"esp",$num,4)); # +=tp[num-1] - &adc ("edx",0); - &add ($carry,"eax"); - &adc ("edx",0); - &mov (&DWP($frame-4,"esp",$num,4),$carry); # tp[num-2]= - - &xor ("eax","eax"); - &mov ($j,$_bp); # &bp[i] - &add ("edx",&DWP($frame+4,"esp",$num,4)); # carry+=tp[num] - &adc ("eax",&DWP($frame+8,"esp",$num,4)); # +=tp[num+1] - &lea ($j,&DWP(4,$j)); - &mov (&DWP($frame,"esp",$num,4),"edx"); # tp[num-1]= - &cmp ($j,$_bpend); - &mov (&DWP($frame+4,"esp",$num,4),"eax"); # tp[num]= - &je (&label("common_tail")); - - &mov ($word,&DWP(0,$j)); # bp[i+1] - &mov ($inp,$_ap); - &mov ($_bp,$j); # &bp[++i] - &xor ($j,$j); - &xor ("edx","edx"); - &mov ("eax",&DWP(0,$inp)); - &jmp (&label("1stmadd")); - -&set_label("bn_sqr_mont",16); -$sbit=$num; - &mov ($_num,$num); - &mov ($_bp,$j); # i=0 - - &mov ("eax",$word); # ap[0] - &mul ($word); # ap[0]*ap[0] - &mov (&DWP($frame,"esp"),"eax"); # tp[0]= - &mov ($sbit,"edx"); - &shr ("edx",1); - &and ($sbit,1); - &inc ($j); -&set_label("sqr",16); - &mov ("eax",&DWP(0,$inp,$j,4)); # ap[j] - &mov ($carry,"edx"); - &mul ($word); # ap[j]*ap[0] - &add ("eax",$carry); - &lea ($j,&DWP(1,$j)); - &adc ("edx",0); - &lea ($carry,&DWP(0,$sbit,"eax",2)); - &shr ("eax",31); - &cmp ($j,$_num); - &mov ($sbit,"eax"); - &mov (&DWP($frame-4,"esp",$j,4),$carry); # tp[j]= - &jl (&label("sqr")); - - &mov ("eax",&DWP(0,$inp,$j,4)); # ap[num-1] - &mov ($carry,"edx"); - &mul ($word); # ap[num-1]*ap[0] - &add ("eax",$carry); - &mov ($word,$_n0); - &adc ("edx",0); - &mov ($inp,$_np); - &lea ($carry,&DWP(0,$sbit,"eax",2)); - &imul ($word,&DWP($frame,"esp")); # n0*tp[0] - &shr ("eax",31); - &mov (&DWP($frame,"esp",$j,4),$carry); # tp[num-1]= - - &lea ($carry,&DWP(0,"eax","edx",2)); - &mov ("eax",&DWP(0,$inp)); # np[0] - &shr ("edx",31); - &mov (&DWP($frame+4,"esp",$j,4),$carry); # tp[num]= - &mov (&DWP($frame+8,"esp",$j,4),"edx"); # tp[num+1]= - - &mul ($word); # np[0]*m - &add ("eax",&DWP($frame,"esp")); # +=tp[0] - &mov ($num,$j); - &adc ("edx",0); - &mov ("eax",&DWP(4,$inp)); # np[1] - &mov ($j,1); - -&set_label("3rdmadd",16); - &mov ($carry,"edx"); - &mul ($word); # np[j]*m - &add ($carry,&DWP($frame,"esp",$j,4)); # +=tp[j] - &adc ("edx",0); - &add ($carry,"eax"); - &mov ("eax",&DWP(4,$inp,$j,4)); # np[j+1] - &adc ("edx",0); - &mov (&DWP($frame-4,"esp",$j,4),$carry); # tp[j-1]= - - &mov ($carry,"edx"); - &mul ($word); # np[j+1]*m - &add ($carry,&DWP($frame+4,"esp",$j,4)); # +=tp[j+1] - &lea ($j,&DWP(2,$j)); - &adc ("edx",0); - &add ($carry,"eax"); - &mov ("eax",&DWP(0,$inp,$j,4)); # np[j+2] - &adc ("edx",0); - &cmp ($j,$num); - &mov (&DWP($frame-8,"esp",$j,4),$carry); # tp[j]= - &jl (&label("3rdmadd")); - - &mov ($carry,"edx"); - &mul ($word); # np[j]*m - &add ($carry,&DWP($frame,"esp",$num,4)); # +=tp[num-1] - &adc ("edx",0); - &add ($carry,"eax"); - &adc ("edx",0); - &mov (&DWP($frame-4,"esp",$num,4),$carry); # tp[num-2]= - - &mov ($j,$_bp); # i - &xor ("eax","eax"); - &mov ($inp,$_ap); - &add ("edx",&DWP($frame+4,"esp",$num,4)); # carry+=tp[num] - &adc ("eax",&DWP($frame+8,"esp",$num,4)); # +=tp[num+1] - &mov (&DWP($frame,"esp",$num,4),"edx"); # tp[num-1]= - &cmp ($j,$num); - &mov (&DWP($frame+4,"esp",$num,4),"eax"); # tp[num]= - &je (&label("common_tail")); - - &mov ($word,&DWP(4,$inp,$j,4)); # ap[i] - &lea ($j,&DWP(1,$j)); - &mov ("eax",$word); - &mov ($_bp,$j); # ++i - &mul ($word); # ap[i]*ap[i] - &add ("eax",&DWP($frame,"esp",$j,4)); # +=tp[i] - &adc ("edx",0); - &mov (&DWP($frame,"esp",$j,4),"eax"); # tp[i]= - &xor ($carry,$carry); - &cmp ($j,$num); - &lea ($j,&DWP(1,$j)); - &je (&label("sqrlast")); - - &mov ($sbit,"edx"); # zaps $num - &shr ("edx",1); - &and ($sbit,1); -&set_label("sqradd",16); - &mov ("eax",&DWP(0,$inp,$j,4)); # ap[j] - &mov ($carry,"edx"); - &mul ($word); # ap[j]*ap[i] - &add ("eax",$carry); - &lea ($carry,&DWP(0,"eax","eax")); - &adc ("edx",0); - &shr ("eax",31); - &add ($carry,&DWP($frame,"esp",$j,4)); # +=tp[j] - &lea ($j,&DWP(1,$j)); - &adc ("eax",0); - &add ($carry,$sbit); - &adc ("eax",0); - &cmp ($j,$_num); - &mov (&DWP($frame-4,"esp",$j,4),$carry); # tp[j]= - &mov ($sbit,"eax"); - &jle (&label("sqradd")); - - &mov ($carry,"edx"); - &lea ("edx",&DWP(0,$sbit,"edx",2)); - &shr ($carry,31); -&set_label("sqrlast"); - &mov ($word,$_n0); - &mov ($inp,$_np); - &imul ($word,&DWP($frame,"esp")); # n0*tp[0] - - &add ("edx",&DWP($frame,"esp",$j,4)); # +=tp[num] - &mov ("eax",&DWP(0,$inp)); # np[0] - &adc ($carry,0); - &mov (&DWP($frame,"esp",$j,4),"edx"); # tp[num]= - &mov (&DWP($frame+4,"esp",$j,4),$carry); # tp[num+1]= - - &mul ($word); # np[0]*m - &add ("eax",&DWP($frame,"esp")); # +=tp[0] - &lea ($num,&DWP(-1,$j)); - &adc ("edx",0); - &mov ($j,1); - &mov ("eax",&DWP(4,$inp)); # np[1] - - &jmp (&label("3rdmadd")); -} - -&set_label("common_tail",16); - &mov ($np,$_np); # load modulus pointer - &mov ($rp,$_rp); # load result pointer - &lea ($tp,&DWP($frame,"esp")); # [$ap and $bp are zapped] - - &mov ("eax",&DWP(0,$tp)); # tp[0] - &mov ($j,$num); # j=num-1 - &xor ($i,$i); # i=0 and clear CF! - -&set_label("sub",16); - &sbb ("eax",&DWP(0,$np,$i,4)); - &mov (&DWP(0,$rp,$i,4),"eax"); # rp[i]=tp[i]-np[i] - &dec ($j); # doesn't affect CF! - &mov ("eax",&DWP(4,$tp,$i,4)); # tp[i+1] - &lea ($i,&DWP(1,$i)); # i++ - &jge (&label("sub")); - - &sbb ("eax",0); # handle upmost overflow bit - &and ($tp,"eax"); - ¬ ("eax"); - &mov ($np,$rp); - &and ($np,"eax"); - &or ($tp,$np); # tp=carry?tp:rp - -&set_label("copy",16); # copy or in-place refresh - &mov ("eax",&DWP(0,$tp,$num,4)); - &mov (&DWP(0,$rp,$num,4),"eax"); # rp[i]=tp[i] - &mov (&DWP($frame,"esp",$num,4),$j); # zap temporary vector - &dec ($num); - &jge (&label("copy")); - - &mov ("esp",$_sp); # pull saved stack pointer - &mov ("eax",1); -&set_label("just_leave"); -&function_end("bn_mul_mont"); - -&asciz("Montgomery Multiplication for x86, CRYPTOGAMS by <appro\@openssl.org>"); - -&asm_finish(); diff --git a/app/openssl/crypto/bn/asm/x86.pl b/app/openssl/crypto/bn/asm/x86.pl deleted file mode 100644 index 1bc4f1bb..00000000 --- a/app/openssl/crypto/bn/asm/x86.pl +++ /dev/null @@ -1,28 +0,0 @@ -#!/usr/local/bin/perl - -push(@INC,"perlasm","../../perlasm"); -require "x86asm.pl"; - -require("x86/mul_add.pl"); -require("x86/mul.pl"); -require("x86/sqr.pl"); -require("x86/div.pl"); -require("x86/add.pl"); -require("x86/sub.pl"); -require("x86/comba.pl"); - -&asm_init($ARGV[0],$0); - -&bn_mul_add_words("bn_mul_add_words"); -&bn_mul_words("bn_mul_words"); -&bn_sqr_words("bn_sqr_words"); -&bn_div_words("bn_div_words"); -&bn_add_words("bn_add_words"); -&bn_sub_words("bn_sub_words"); -&bn_mul_comba("bn_mul_comba8",8); -&bn_mul_comba("bn_mul_comba4",4); -&bn_sqr_comba("bn_sqr_comba8",8); -&bn_sqr_comba("bn_sqr_comba4",4); - -&asm_finish(); - diff --git a/app/openssl/crypto/bn/asm/x86/add.pl b/app/openssl/crypto/bn/asm/x86/add.pl deleted file mode 100644 index 0b5cf583..00000000 --- a/app/openssl/crypto/bn/asm/x86/add.pl +++ /dev/null @@ -1,76 +0,0 @@ -#!/usr/local/bin/perl -# x86 assember - -sub bn_add_words - { - local($name)=@_; - - &function_begin($name,""); - - &comment(""); - $a="esi"; - $b="edi"; - $c="eax"; - $r="ebx"; - $tmp1="ecx"; - $tmp2="edx"; - $num="ebp"; - - &mov($r,&wparam(0)); # get r - &mov($a,&wparam(1)); # get a - &mov($b,&wparam(2)); # get b - &mov($num,&wparam(3)); # get num - &xor($c,$c); # clear carry - &and($num,0xfffffff8); # num / 8 - - &jz(&label("aw_finish")); - - &set_label("aw_loop",0); - for ($i=0; $i<8; $i++) - { - &comment("Round $i"); - - &mov($tmp1,&DWP($i*4,$a,"",0)); # *a - &mov($tmp2,&DWP($i*4,$b,"",0)); # *b - &add($tmp1,$c); - &mov($c,0); - &adc($c,$c); - &add($tmp1,$tmp2); - &adc($c,0); - &mov(&DWP($i*4,$r,"",0),$tmp1); # *r - } - - &comment(""); - &add($a,32); - &add($b,32); - &add($r,32); - &sub($num,8); - &jnz(&label("aw_loop")); - - &set_label("aw_finish",0); - &mov($num,&wparam(3)); # get num - &and($num,7); - &jz(&label("aw_end")); - - for ($i=0; $i<7; $i++) - { - &comment("Tail Round $i"); - &mov($tmp1,&DWP($i*4,$a,"",0)); # *a - &mov($tmp2,&DWP($i*4,$b,"",0));# *b - &add($tmp1,$c); - &mov($c,0); - &adc($c,$c); - &add($tmp1,$tmp2); - &adc($c,0); - &dec($num) if ($i != 6); - &mov(&DWP($i*4,$r,"",0),$tmp1); # *a - &jz(&label("aw_end")) if ($i != 6); - } - &set_label("aw_end",0); - -# &mov("eax",$c); # $c is "eax" - - &function_end($name); - } - -1; diff --git a/app/openssl/crypto/bn/asm/x86/comba.pl b/app/openssl/crypto/bn/asm/x86/comba.pl deleted file mode 100644 index 22912536..00000000 --- a/app/openssl/crypto/bn/asm/x86/comba.pl +++ /dev/null @@ -1,277 +0,0 @@ -#!/usr/local/bin/perl -# x86 assember - -sub mul_add_c - { - local($a,$ai,$b,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_; - - # pos == -1 if eax and edx are pre-loaded, 0 to load from next - # words, and 1 if load return value - - &comment("mul a[$ai]*b[$bi]"); - - # "eax" and "edx" will always be pre-loaded. - # &mov("eax",&DWP($ai*4,$a,"",0)) ; - # &mov("edx",&DWP($bi*4,$b,"",0)); - - &mul("edx"); - &add($c0,"eax"); - &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0; # laod next a - &mov("eax",&wparam(0)) if $pos > 0; # load r[] - ### - &adc($c1,"edx"); - &mov("edx",&DWP(($nb)*4,$b,"",0)) if $pos == 0; # laod next b - &mov("edx",&DWP(($nb)*4,$b,"",0)) if $pos == 1; # laod next b - ### - &adc($c2,0); - # is pos > 1, it means it is the last loop - &mov(&DWP($i*4,"eax","",0),$c0) if $pos > 0; # save r[]; - &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1; # laod next a - } - -sub sqr_add_c - { - local($r,$a,$ai,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_; - - # pos == -1 if eax and edx are pre-loaded, 0 to load from next - # words, and 1 if load return value - - &comment("sqr a[$ai]*a[$bi]"); - - # "eax" and "edx" will always be pre-loaded. - # &mov("eax",&DWP($ai*4,$a,"",0)) ; - # &mov("edx",&DWP($bi*4,$b,"",0)); - - if ($ai == $bi) - { &mul("eax");} - else - { &mul("edx");} - &add($c0,"eax"); - &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0; # load next a - ### - &adc($c1,"edx"); - &mov("edx",&DWP(($nb)*4,$a,"",0)) if ($pos == 1) && ($na != $nb); - ### - &adc($c2,0); - # is pos > 1, it means it is the last loop - &mov(&DWP($i*4,$r,"",0),$c0) if $pos > 0; # save r[]; - &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1; # load next b - } - -sub sqr_add_c2 - { - local($r,$a,$ai,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_; - - # pos == -1 if eax and edx are pre-loaded, 0 to load from next - # words, and 1 if load return value - - &comment("sqr a[$ai]*a[$bi]"); - - # "eax" and "edx" will always be pre-loaded. - # &mov("eax",&DWP($ai*4,$a,"",0)) ; - # &mov("edx",&DWP($bi*4,$a,"",0)); - - if ($ai == $bi) - { &mul("eax");} - else - { &mul("edx");} - &add("eax","eax"); - ### - &adc("edx","edx"); - ### - &adc($c2,0); - &add($c0,"eax"); - &adc($c1,"edx"); - &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0; # load next a - &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1; # load next b - &adc($c2,0); - &mov(&DWP($i*4,$r,"",0),$c0) if $pos > 0; # save r[]; - &mov("edx",&DWP(($nb)*4,$a,"",0)) if ($pos <= 1) && ($na != $nb); - ### - } - -sub bn_mul_comba - { - local($name,$num)=@_; - local($a,$b,$c0,$c1,$c2); - local($i,$as,$ae,$bs,$be,$ai,$bi); - local($tot,$end); - - &function_begin_B($name,""); - - $c0="ebx"; - $c1="ecx"; - $c2="ebp"; - $a="esi"; - $b="edi"; - - $as=0; - $ae=0; - $bs=0; - $be=0; - $tot=$num+$num-1; - - &push("esi"); - &mov($a,&wparam(1)); - &push("edi"); - &mov($b,&wparam(2)); - &push("ebp"); - &push("ebx"); - - &xor($c0,$c0); - &mov("eax",&DWP(0,$a,"",0)); # load the first word - &xor($c1,$c1); - &mov("edx",&DWP(0,$b,"",0)); # load the first second - - for ($i=0; $i<$tot; $i++) - { - $ai=$as; - $bi=$bs; - $end=$be+1; - - &comment("################## Calculate word $i"); - - for ($j=$bs; $j<$end; $j++) - { - &xor($c2,$c2) if ($j == $bs); - if (($j+1) == $end) - { - $v=1; - $v=2 if (($i+1) == $tot); - } - else - { $v=0; } - if (($j+1) != $end) - { - $na=($ai-1); - $nb=($bi+1); - } - else - { - $na=$as+($i < ($num-1)); - $nb=$bs+($i >= ($num-1)); - } -#printf STDERR "[$ai,$bi] -> [$na,$nb]\n"; - &mul_add_c($a,$ai,$b,$bi,$c0,$c1,$c2,$v,$i,$na,$nb); - if ($v) - { - &comment("saved r[$i]"); - # &mov("eax",&wparam(0)); - # &mov(&DWP($i*4,"eax","",0),$c0); - ($c0,$c1,$c2)=($c1,$c2,$c0); - } - $ai--; - $bi++; - } - $as++ if ($i < ($num-1)); - $ae++ if ($i >= ($num-1)); - - $bs++ if ($i >= ($num-1)); - $be++ if ($i < ($num-1)); - } - &comment("save r[$i]"); - # &mov("eax",&wparam(0)); - &mov(&DWP($i*4,"eax","",0),$c0); - - &pop("ebx"); - &pop("ebp"); - &pop("edi"); - &pop("esi"); - &ret(); - &function_end_B($name); - } - -sub bn_sqr_comba - { - local($name,$num)=@_; - local($r,$a,$c0,$c1,$c2)=@_; - local($i,$as,$ae,$bs,$be,$ai,$bi); - local($b,$tot,$end,$half); - - &function_begin_B($name,""); - - $c0="ebx"; - $c1="ecx"; - $c2="ebp"; - $a="esi"; - $r="edi"; - - &push("esi"); - &push("edi"); - &push("ebp"); - &push("ebx"); - &mov($r,&wparam(0)); - &mov($a,&wparam(1)); - &xor($c0,$c0); - &xor($c1,$c1); - &mov("eax",&DWP(0,$a,"",0)); # load the first word - - $as=0; - $ae=0; - $bs=0; - $be=0; - $tot=$num+$num-1; - - for ($i=0; $i<$tot; $i++) - { - $ai=$as; - $bi=$bs; - $end=$be+1; - - &comment("############### Calculate word $i"); - for ($j=$bs; $j<$end; $j++) - { - &xor($c2,$c2) if ($j == $bs); - if (($ai-1) < ($bi+1)) - { - $v=1; - $v=2 if ($i+1) == $tot; - } - else - { $v=0; } - if (!$v) - { - $na=$ai-1; - $nb=$bi+1; - } - else - { - $na=$as+($i < ($num-1)); - $nb=$bs+($i >= ($num-1)); - } - if ($ai == $bi) - { - &sqr_add_c($r,$a,$ai,$bi, - $c0,$c1,$c2,$v,$i,$na,$nb); - } - else - { - &sqr_add_c2($r,$a,$ai,$bi, - $c0,$c1,$c2,$v,$i,$na,$nb); - } - if ($v) - { - &comment("saved r[$i]"); - #&mov(&DWP($i*4,$r,"",0),$c0); - ($c0,$c1,$c2)=($c1,$c2,$c0); - last; - } - $ai--; - $bi++; - } - $as++ if ($i < ($num-1)); - $ae++ if ($i >= ($num-1)); - - $bs++ if ($i >= ($num-1)); - $be++ if ($i < ($num-1)); - } - &mov(&DWP($i*4,$r,"",0),$c0); - &pop("ebx"); - &pop("ebp"); - &pop("edi"); - &pop("esi"); - &ret(); - &function_end_B($name); - } - -1; diff --git a/app/openssl/crypto/bn/asm/x86/div.pl b/app/openssl/crypto/bn/asm/x86/div.pl deleted file mode 100644 index 0e90152c..00000000 --- a/app/openssl/crypto/bn/asm/x86/div.pl +++ /dev/null @@ -1,15 +0,0 @@ -#!/usr/local/bin/perl -# x86 assember - -sub bn_div_words - { - local($name)=@_; - - &function_begin($name,""); - &mov("edx",&wparam(0)); # - &mov("eax",&wparam(1)); # - &mov("ebx",&wparam(2)); # - &div("ebx"); - &function_end($name); - } -1; diff --git a/app/openssl/crypto/bn/asm/x86/f b/app/openssl/crypto/bn/asm/x86/f deleted file mode 100644 index 22e41122..00000000 --- a/app/openssl/crypto/bn/asm/x86/f +++ /dev/null @@ -1,3 +0,0 @@ -#!/usr/local/bin/perl -# x86 assember - diff --git a/app/openssl/crypto/bn/asm/x86/mul.pl b/app/openssl/crypto/bn/asm/x86/mul.pl deleted file mode 100644 index 674cb9b0..00000000 --- a/app/openssl/crypto/bn/asm/x86/mul.pl +++ /dev/null @@ -1,77 +0,0 @@ -#!/usr/local/bin/perl -# x86 assember - -sub bn_mul_words - { - local($name)=@_; - - &function_begin($name,""); - - &comment(""); - $Low="eax"; - $High="edx"; - $a="ebx"; - $w="ecx"; - $r="edi"; - $c="esi"; - $num="ebp"; - - &xor($c,$c); # clear carry - &mov($r,&wparam(0)); # - &mov($a,&wparam(1)); # - &mov($num,&wparam(2)); # - &mov($w,&wparam(3)); # - - &and($num,0xfffffff8); # num / 8 - &jz(&label("mw_finish")); - - &set_label("mw_loop",0); - for ($i=0; $i<32; $i+=4) - { - &comment("Round $i"); - - &mov("eax",&DWP($i,$a,"",0)); # *a - &mul($w); # *a * w - &add("eax",$c); # L(t)+=c - # XXX - - &adc("edx",0); # H(t)+=carry - &mov(&DWP($i,$r,"",0),"eax"); # *r= L(t); - - &mov($c,"edx"); # c= H(t); - } - - &comment(""); - &add($a,32); - &add($r,32); - &sub($num,8); - &jz(&label("mw_finish")); - &jmp(&label("mw_loop")); - - &set_label("mw_finish",0); - &mov($num,&wparam(2)); # get num - &and($num,7); - &jnz(&label("mw_finish2")); - &jmp(&label("mw_end")); - - &set_label("mw_finish2",1); - for ($i=0; $i<7; $i++) - { - &comment("Tail Round $i"); - &mov("eax",&DWP($i*4,$a,"",0));# *a - &mul($w); # *a * w - &add("eax",$c); # L(t)+=c - # XXX - &adc("edx",0); # H(t)+=carry - &mov(&DWP($i*4,$r,"",0),"eax");# *r= L(t); - &mov($c,"edx"); # c= H(t); - &dec($num) if ($i != 7-1); - &jz(&label("mw_end")) if ($i != 7-1); - } - &set_label("mw_end",0); - &mov("eax",$c); - - &function_end($name); - } - -1; diff --git a/app/openssl/crypto/bn/asm/x86/mul_add.pl b/app/openssl/crypto/bn/asm/x86/mul_add.pl deleted file mode 100644 index 61830d3a..00000000 --- a/app/openssl/crypto/bn/asm/x86/mul_add.pl +++ /dev/null @@ -1,87 +0,0 @@ -#!/usr/local/bin/perl -# x86 assember - -sub bn_mul_add_words - { - local($name)=@_; - - &function_begin($name,""); - - &comment(""); - $Low="eax"; - $High="edx"; - $a="ebx"; - $w="ebp"; - $r="edi"; - $c="esi"; - - &xor($c,$c); # clear carry - &mov($r,&wparam(0)); # - - &mov("ecx",&wparam(2)); # - &mov($a,&wparam(1)); # - - &and("ecx",0xfffffff8); # num / 8 - &mov($w,&wparam(3)); # - - &push("ecx"); # Up the stack for a tmp variable - - &jz(&label("maw_finish")); - - &set_label("maw_loop",0); - - &mov(&swtmp(0),"ecx"); # - - for ($i=0; $i<32; $i+=4) - { - &comment("Round $i"); - - &mov("eax",&DWP($i,$a,"",0)); # *a - &mul($w); # *a * w - &add("eax",$c); # L(t)+= *r - &mov($c,&DWP($i,$r,"",0)); # L(t)+= *r - &adc("edx",0); # H(t)+=carry - &add("eax",$c); # L(t)+=c - &adc("edx",0); # H(t)+=carry - &mov(&DWP($i,$r,"",0),"eax"); # *r= L(t); - &mov($c,"edx"); # c= H(t); - } - - &comment(""); - &mov("ecx",&swtmp(0)); # - &add($a,32); - &add($r,32); - &sub("ecx",8); - &jnz(&label("maw_loop")); - - &set_label("maw_finish",0); - &mov("ecx",&wparam(2)); # get num - &and("ecx",7); - &jnz(&label("maw_finish2")); # helps branch prediction - &jmp(&label("maw_end")); - - &set_label("maw_finish2",1); - for ($i=0; $i<7; $i++) - { - &comment("Tail Round $i"); - &mov("eax",&DWP($i*4,$a,"",0));# *a - &mul($w); # *a * w - &add("eax",$c); # L(t)+=c - &mov($c,&DWP($i*4,$r,"",0)); # L(t)+= *r - &adc("edx",0); # H(t)+=carry - &add("eax",$c); - &adc("edx",0); # H(t)+=carry - &dec("ecx") if ($i != 7-1); - &mov(&DWP($i*4,$r,"",0),"eax"); # *r= L(t); - &mov($c,"edx"); # c= H(t); - &jz(&label("maw_end")) if ($i != 7-1); - } - &set_label("maw_end",0); - &mov("eax",$c); - - &pop("ecx"); # clear variable from - - &function_end($name); - } - -1; diff --git a/app/openssl/crypto/bn/asm/x86/sqr.pl b/app/openssl/crypto/bn/asm/x86/sqr.pl deleted file mode 100644 index 1f90993c..00000000 --- a/app/openssl/crypto/bn/asm/x86/sqr.pl +++ /dev/null @@ -1,60 +0,0 @@ -#!/usr/local/bin/perl -# x86 assember - -sub bn_sqr_words - { - local($name)=@_; - - &function_begin($name,""); - - &comment(""); - $r="esi"; - $a="edi"; - $num="ebx"; - - &mov($r,&wparam(0)); # - &mov($a,&wparam(1)); # - &mov($num,&wparam(2)); # - - &and($num,0xfffffff8); # num / 8 - &jz(&label("sw_finish")); - - &set_label("sw_loop",0); - for ($i=0; $i<32; $i+=4) - { - &comment("Round $i"); - &mov("eax",&DWP($i,$a,"",0)); # *a - # XXX - &mul("eax"); # *a * *a - &mov(&DWP($i*2,$r,"",0),"eax"); # - &mov(&DWP($i*2+4,$r,"",0),"edx");# - } - - &comment(""); - &add($a,32); - &add($r,64); - &sub($num,8); - &jnz(&label("sw_loop")); - - &set_label("sw_finish",0); - &mov($num,&wparam(2)); # get num - &and($num,7); - &jz(&label("sw_end")); - - for ($i=0; $i<7; $i++) - { - &comment("Tail Round $i"); - &mov("eax",&DWP($i*4,$a,"",0)); # *a - # XXX - &mul("eax"); # *a * *a - &mov(&DWP($i*8,$r,"",0),"eax"); # - &dec($num) if ($i != 7-1); - &mov(&DWP($i*8+4,$r,"",0),"edx"); - &jz(&label("sw_end")) if ($i != 7-1); - } - &set_label("sw_end",0); - - &function_end($name); - } - -1; diff --git a/app/openssl/crypto/bn/asm/x86/sub.pl b/app/openssl/crypto/bn/asm/x86/sub.pl deleted file mode 100644 index 837b0e1b..00000000 --- a/app/openssl/crypto/bn/asm/x86/sub.pl +++ /dev/null @@ -1,76 +0,0 @@ -#!/usr/local/bin/perl -# x86 assember - -sub bn_sub_words - { - local($name)=@_; - - &function_begin($name,""); - - &comment(""); - $a="esi"; - $b="edi"; - $c="eax"; - $r="ebx"; - $tmp1="ecx"; - $tmp2="edx"; - $num="ebp"; - - &mov($r,&wparam(0)); # get r - &mov($a,&wparam(1)); # get a - &mov($b,&wparam(2)); # get b - &mov($num,&wparam(3)); # get num - &xor($c,$c); # clear carry - &and($num,0xfffffff8); # num / 8 - - &jz(&label("aw_finish")); - - &set_label("aw_loop",0); - for ($i=0; $i<8; $i++) - { - &comment("Round $i"); - - &mov($tmp1,&DWP($i*4,$a,"",0)); # *a - &mov($tmp2,&DWP($i*4,$b,"",0)); # *b - &sub($tmp1,$c); - &mov($c,0); - &adc($c,$c); - &sub($tmp1,$tmp2); - &adc($c,0); - &mov(&DWP($i*4,$r,"",0),$tmp1); # *r - } - - &comment(""); - &add($a,32); - &add($b,32); - &add($r,32); - &sub($num,8); - &jnz(&label("aw_loop")); - - &set_label("aw_finish",0); - &mov($num,&wparam(3)); # get num - &and($num,7); - &jz(&label("aw_end")); - - for ($i=0; $i<7; $i++) - { - &comment("Tail Round $i"); - &mov($tmp1,&DWP($i*4,$a,"",0)); # *a - &mov($tmp2,&DWP($i*4,$b,"",0));# *b - &sub($tmp1,$c); - &mov($c,0); - &adc($c,$c); - &sub($tmp1,$tmp2); - &adc($c,0); - &dec($num) if ($i != 6); - &mov(&DWP($i*4,$r,"",0),$tmp1); # *a - &jz(&label("aw_end")) if ($i != 6); - } - &set_label("aw_end",0); - -# &mov("eax",$c); # $c is "eax" - - &function_end($name); - } - -1; diff --git a/app/openssl/crypto/bn/asm/x86_64-gcc.c b/app/openssl/crypto/bn/asm/x86_64-gcc.c deleted file mode 100644 index acb0b401..00000000 --- a/app/openssl/crypto/bn/asm/x86_64-gcc.c +++ /dev/null @@ -1,606 +0,0 @@ -#include "../bn_lcl.h" -#if !(defined(__GNUC__) && __GNUC__>=2) -# include "../bn_asm.c" /* kind of dirty hack for Sun Studio */ -#else -/* - * x86_64 BIGNUM accelerator version 0.1, December 2002. - * - * Implemented by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL - * project. - * - * Rights for redistribution and usage in source and binary forms are - * granted according to the OpenSSL license. Warranty of any kind is - * disclaimed. - * - * Q. Version 0.1? It doesn't sound like Andy, he used to assign real - * versions, like 1.0... - * A. Well, that's because this code is basically a quick-n-dirty - * proof-of-concept hack. As you can see it's implemented with - * inline assembler, which means that you're bound to GCC and that - * there might be enough room for further improvement. - * - * Q. Why inline assembler? - * A. x86_64 features own ABI which I'm not familiar with. This is - * why I decided to let the compiler take care of subroutine - * prologue/epilogue as well as register allocation. For reference. - * Win64 implements different ABI for AMD64, different from Linux. - * - * Q. How much faster does it get? - * A. 'apps/openssl speed rsa dsa' output with no-asm: - * - * sign verify sign/s verify/s - * rsa 512 bits 0.0006s 0.0001s 1683.8 18456.2 - * rsa 1024 bits 0.0028s 0.0002s 356.0 6407.0 - * rsa 2048 bits 0.0172s 0.0005s 58.0 1957.8 - * rsa 4096 bits 0.1155s 0.0018s 8.7 555.6 - * sign verify sign/s verify/s - * dsa 512 bits 0.0005s 0.0006s 2100.8 1768.3 - * dsa 1024 bits 0.0014s 0.0018s 692.3 559.2 - * dsa 2048 bits 0.0049s 0.0061s 204.7 165.0 - * - * 'apps/openssl speed rsa dsa' output with this module: - * - * sign verify sign/s verify/s - * rsa 512 bits 0.0004s 0.0000s 2767.1 33297.9 - * rsa 1024 bits 0.0012s 0.0001s 867.4 14674.7 - * rsa 2048 bits 0.0061s 0.0002s 164.0 5270.0 - * rsa 4096 bits 0.0384s 0.0006s 26.1 1650.8 - * sign verify sign/s verify/s - * dsa 512 bits 0.0002s 0.0003s 4442.2 3786.3 - * dsa 1024 bits 0.0005s 0.0007s 1835.1 1497.4 - * dsa 2048 bits 0.0016s 0.0020s 620.4 504.6 - * - * For the reference. IA-32 assembler implementation performs - * very much like 64-bit code compiled with no-asm on the same - * machine. - */ - -#ifdef _WIN64 -#define BN_ULONG unsigned long long -#else -#define BN_ULONG unsigned long -#endif - -#undef mul -#undef mul_add -#undef sqr - -/* - * "m"(a), "+m"(r) is the way to favor DirectPath µ-code; - * "g"(0) let the compiler to decide where does it - * want to keep the value of zero; - */ -#define mul_add(r,a,word,carry) do { \ - register BN_ULONG high,low; \ - asm ("mulq %3" \ - : "=a"(low),"=d"(high) \ - : "a"(word),"m"(a) \ - : "cc"); \ - asm ("addq %2,%0; adcq %3,%1" \ - : "+r"(carry),"+d"(high)\ - : "a"(low),"g"(0) \ - : "cc"); \ - asm ("addq %2,%0; adcq %3,%1" \ - : "+m"(r),"+d"(high) \ - : "r"(carry),"g"(0) \ - : "cc"); \ - carry=high; \ - } while (0) - -#define mul(r,a,word,carry) do { \ - register BN_ULONG high,low; \ - asm ("mulq %3" \ - : "=a"(low),"=d"(high) \ - : "a"(word),"g"(a) \ - : "cc"); \ - asm ("addq %2,%0; adcq %3,%1" \ - : "+r"(carry),"+d"(high)\ - : "a"(low),"g"(0) \ - : "cc"); \ - (r)=carry, carry=high; \ - } while (0) - -#define sqr(r0,r1,a) \ - asm ("mulq %2" \ - : "=a"(r0),"=d"(r1) \ - : "a"(a) \ - : "cc"); - -BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w) - { - BN_ULONG c1=0; - - if (num <= 0) return(c1); - - while (num&~3) - { - mul_add(rp[0],ap[0],w,c1); - mul_add(rp[1],ap[1],w,c1); - mul_add(rp[2],ap[2],w,c1); - mul_add(rp[3],ap[3],w,c1); - ap+=4; rp+=4; num-=4; - } - if (num) - { - mul_add(rp[0],ap[0],w,c1); if (--num==0) return c1; - mul_add(rp[1],ap[1],w,c1); if (--num==0) return c1; - mul_add(rp[2],ap[2],w,c1); return c1; - } - - return(c1); - } - -BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w) - { - BN_ULONG c1=0; - - if (num <= 0) return(c1); - - while (num&~3) - { - mul(rp[0],ap[0],w,c1); - mul(rp[1],ap[1],w,c1); - mul(rp[2],ap[2],w,c1); - mul(rp[3],ap[3],w,c1); - ap+=4; rp+=4; num-=4; - } - if (num) - { - mul(rp[0],ap[0],w,c1); if (--num == 0) return c1; - mul(rp[1],ap[1],w,c1); if (--num == 0) return c1; - mul(rp[2],ap[2],w,c1); - } - return(c1); - } - -void bn_sqr_words(BN_ULONG *r, const BN_ULONG *a, int n) - { - if (n <= 0) return; - - while (n&~3) - { - sqr(r[0],r[1],a[0]); - sqr(r[2],r[3],a[1]); - sqr(r[4],r[5],a[2]); - sqr(r[6],r[7],a[3]); - a+=4; r+=8; n-=4; - } - if (n) - { - sqr(r[0],r[1],a[0]); if (--n == 0) return; - sqr(r[2],r[3],a[1]); if (--n == 0) return; - sqr(r[4],r[5],a[2]); - } - } - -BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d) -{ BN_ULONG ret,waste; - - asm ("divq %4" - : "=a"(ret),"=d"(waste) - : "a"(l),"d"(h),"g"(d) - : "cc"); - - return ret; -} - -BN_ULONG bn_add_words (BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,int n) -{ BN_ULONG ret=0,i=0; - - if (n <= 0) return 0; - - asm ( - " subq %2,%2 \n" - ".p2align 4 \n" - "1: movq (%4,%2,8),%0 \n" - " adcq (%5,%2,8),%0 \n" - " movq %0,(%3,%2,8) \n" - " leaq 1(%2),%2 \n" - " loop 1b \n" - " sbbq %0,%0 \n" - : "=&a"(ret),"+c"(n),"=&r"(i) - : "r"(rp),"r"(ap),"r"(bp) - : "cc" - ); - - return ret&1; -} - -#ifndef SIMICS -BN_ULONG bn_sub_words (BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,int n) -{ BN_ULONG ret=0,i=0; - - if (n <= 0) return 0; - - asm ( - " subq %2,%2 \n" - ".p2align 4 \n" - "1: movq (%4,%2,8),%0 \n" - " sbbq (%5,%2,8),%0 \n" - " movq %0,(%3,%2,8) \n" - " leaq 1(%2),%2 \n" - " loop 1b \n" - " sbbq %0,%0 \n" - : "=&a"(ret),"+c"(n),"=&r"(i) - : "r"(rp),"r"(ap),"r"(bp) - : "cc" - ); - - return ret&1; -} -#else -/* Simics 1.4<7 has buggy sbbq:-( */ -#define BN_MASK2 0xffffffffffffffffL -BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n) - { - BN_ULONG t1,t2; - int c=0; - - if (n <= 0) return((BN_ULONG)0); - - for (;;) - { - t1=a[0]; t2=b[0]; - r[0]=(t1-t2-c)&BN_MASK2; - if (t1 != t2) c=(t1 < t2); - if (--n <= 0) break; - - t1=a[1]; t2=b[1]; - r[1]=(t1-t2-c)&BN_MASK2; - if (t1 != t2) c=(t1 < t2); - if (--n <= 0) break; - - t1=a[2]; t2=b[2]; - r[2]=(t1-t2-c)&BN_MASK2; - if (t1 != t2) c=(t1 < t2); - if (--n <= 0) break; - - t1=a[3]; t2=b[3]; - r[3]=(t1-t2-c)&BN_MASK2; - if (t1 != t2) c=(t1 < t2); - if (--n <= 0) break; - - a+=4; - b+=4; - r+=4; - } - return(c); - } -#endif - -/* mul_add_c(a,b,c0,c1,c2) -- c+=a*b for three word number c=(c2,c1,c0) */ -/* mul_add_c2(a,b,c0,c1,c2) -- c+=2*a*b for three word number c=(c2,c1,c0) */ -/* sqr_add_c(a,i,c0,c1,c2) -- c+=a[i]^2 for three word number c=(c2,c1,c0) */ -/* sqr_add_c2(a,i,c0,c1,c2) -- c+=2*a[i]*a[j] for three word number c=(c2,c1,c0) */ - -#if 0 -/* original macros are kept for reference purposes */ -#define mul_add_c(a,b,c0,c1,c2) { \ - BN_ULONG ta=(a),tb=(b); \ - t1 = ta * tb; \ - t2 = BN_UMULT_HIGH(ta,tb); \ - c0 += t1; t2 += (c0<t1)?1:0; \ - c1 += t2; c2 += (c1<t2)?1:0; \ - } - -#define mul_add_c2(a,b,c0,c1,c2) { \ - BN_ULONG ta=(a),tb=(b),t0; \ - t1 = BN_UMULT_HIGH(ta,tb); \ - t0 = ta * tb; \ - t2 = t1+t1; c2 += (t2<t1)?1:0; \ - t1 = t0+t0; t2 += (t1<t0)?1:0; \ - c0 += t1; t2 += (c0<t1)?1:0; \ - c1 += t2; c2 += (c1<t2)?1:0; \ - } -#else -#define mul_add_c(a,b,c0,c1,c2) do { \ - asm ("mulq %3" \ - : "=a"(t1),"=d"(t2) \ - : "a"(a),"m"(b) \ - : "cc"); \ - asm ("addq %2,%0; adcq %3,%1" \ - : "+r"(c0),"+d"(t2) \ - : "a"(t1),"g"(0) \ - : "cc"); \ - asm ("addq %2,%0; adcq %3,%1" \ - : "+r"(c1),"+r"(c2) \ - : "d"(t2),"g"(0) \ - : "cc"); \ - } while (0) - -#define sqr_add_c(a,i,c0,c1,c2) do { \ - asm ("mulq %2" \ - : "=a"(t1),"=d"(t2) \ - : "a"(a[i]) \ - : "cc"); \ - asm ("addq %2,%0; adcq %3,%1" \ - : "+r"(c0),"+d"(t2) \ - : "a"(t1),"g"(0) \ - : "cc"); \ - asm ("addq %2,%0; adcq %3,%1" \ - : "+r"(c1),"+r"(c2) \ - : "d"(t2),"g"(0) \ - : "cc"); \ - } while (0) - -#define mul_add_c2(a,b,c0,c1,c2) do { \ - asm ("mulq %3" \ - : "=a"(t1),"=d"(t2) \ - : "a"(a),"m"(b) \ - : "cc"); \ - asm ("addq %0,%0; adcq %2,%1" \ - : "+d"(t2),"+r"(c2) \ - : "g"(0) \ - : "cc"); \ - asm ("addq %0,%0; adcq %2,%1" \ - : "+a"(t1),"+d"(t2) \ - : "g"(0) \ - : "cc"); \ - asm ("addq %2,%0; adcq %3,%1" \ - : "+r"(c0),"+d"(t2) \ - : "a"(t1),"g"(0) \ - : "cc"); \ - asm ("addq %2,%0; adcq %3,%1" \ - : "+r"(c1),"+r"(c2) \ - : "d"(t2),"g"(0) \ - : "cc"); \ - } while (0) -#endif - -#define sqr_add_c2(a,i,j,c0,c1,c2) \ - mul_add_c2((a)[i],(a)[j],c0,c1,c2) - -void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) - { - BN_ULONG t1,t2; - BN_ULONG c1,c2,c3; - - c1=0; - c2=0; - c3=0; - mul_add_c(a[0],b[0],c1,c2,c3); - r[0]=c1; - c1=0; - mul_add_c(a[0],b[1],c2,c3,c1); - mul_add_c(a[1],b[0],c2,c3,c1); - r[1]=c2; - c2=0; - mul_add_c(a[2],b[0],c3,c1,c2); - mul_add_c(a[1],b[1],c3,c1,c2); - mul_add_c(a[0],b[2],c3,c1,c2); - r[2]=c3; - c3=0; - mul_add_c(a[0],b[3],c1,c2,c3); - mul_add_c(a[1],b[2],c1,c2,c3); - mul_add_c(a[2],b[1],c1,c2,c3); - mul_add_c(a[3],b[0],c1,c2,c3); - r[3]=c1; - c1=0; - mul_add_c(a[4],b[0],c2,c3,c1); - mul_add_c(a[3],b[1],c2,c3,c1); - mul_add_c(a[2],b[2],c2,c3,c1); - mul_add_c(a[1],b[3],c2,c3,c1); - mul_add_c(a[0],b[4],c2,c3,c1); - r[4]=c2; - c2=0; - mul_add_c(a[0],b[5],c3,c1,c2); - mul_add_c(a[1],b[4],c3,c1,c2); - mul_add_c(a[2],b[3],c3,c1,c2); - mul_add_c(a[3],b[2],c3,c1,c2); - mul_add_c(a[4],b[1],c3,c1,c2); - mul_add_c(a[5],b[0],c3,c1,c2); - r[5]=c3; - c3=0; - mul_add_c(a[6],b[0],c1,c2,c3); - mul_add_c(a[5],b[1],c1,c2,c3); - mul_add_c(a[4],b[2],c1,c2,c3); - mul_add_c(a[3],b[3],c1,c2,c3); - mul_add_c(a[2],b[4],c1,c2,c3); - mul_add_c(a[1],b[5],c1,c2,c3); - mul_add_c(a[0],b[6],c1,c2,c3); - r[6]=c1; - c1=0; - mul_add_c(a[0],b[7],c2,c3,c1); - mul_add_c(a[1],b[6],c2,c3,c1); - mul_add_c(a[2],b[5],c2,c3,c1); - mul_add_c(a[3],b[4],c2,c3,c1); - mul_add_c(a[4],b[3],c2,c3,c1); - mul_add_c(a[5],b[2],c2,c3,c1); - mul_add_c(a[6],b[1],c2,c3,c1); - mul_add_c(a[7],b[0],c2,c3,c1); - r[7]=c2; - c2=0; - mul_add_c(a[7],b[1],c3,c1,c2); - mul_add_c(a[6],b[2],c3,c1,c2); - mul_add_c(a[5],b[3],c3,c1,c2); - mul_add_c(a[4],b[4],c3,c1,c2); - mul_add_c(a[3],b[5],c3,c1,c2); - mul_add_c(a[2],b[6],c3,c1,c2); - mul_add_c(a[1],b[7],c3,c1,c2); - r[8]=c3; - c3=0; - mul_add_c(a[2],b[7],c1,c2,c3); - mul_add_c(a[3],b[6],c1,c2,c3); - mul_add_c(a[4],b[5],c1,c2,c3); - mul_add_c(a[5],b[4],c1,c2,c3); - mul_add_c(a[6],b[3],c1,c2,c3); - mul_add_c(a[7],b[2],c1,c2,c3); - r[9]=c1; - c1=0; - mul_add_c(a[7],b[3],c2,c3,c1); - mul_add_c(a[6],b[4],c2,c3,c1); - mul_add_c(a[5],b[5],c2,c3,c1); - mul_add_c(a[4],b[6],c2,c3,c1); - mul_add_c(a[3],b[7],c2,c3,c1); - r[10]=c2; - c2=0; - mul_add_c(a[4],b[7],c3,c1,c2); - mul_add_c(a[5],b[6],c3,c1,c2); - mul_add_c(a[6],b[5],c3,c1,c2); - mul_add_c(a[7],b[4],c3,c1,c2); - r[11]=c3; - c3=0; - mul_add_c(a[7],b[5],c1,c2,c3); - mul_add_c(a[6],b[6],c1,c2,c3); - mul_add_c(a[5],b[7],c1,c2,c3); - r[12]=c1; - c1=0; - mul_add_c(a[6],b[7],c2,c3,c1); - mul_add_c(a[7],b[6],c2,c3,c1); - r[13]=c2; - c2=0; - mul_add_c(a[7],b[7],c3,c1,c2); - r[14]=c3; - r[15]=c1; - } - -void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) - { - BN_ULONG t1,t2; - BN_ULONG c1,c2,c3; - - c1=0; - c2=0; - c3=0; - mul_add_c(a[0],b[0],c1,c2,c3); - r[0]=c1; - c1=0; - mul_add_c(a[0],b[1],c2,c3,c1); - mul_add_c(a[1],b[0],c2,c3,c1); - r[1]=c2; - c2=0; - mul_add_c(a[2],b[0],c3,c1,c2); - mul_add_c(a[1],b[1],c3,c1,c2); - mul_add_c(a[0],b[2],c3,c1,c2); - r[2]=c3; - c3=0; - mul_add_c(a[0],b[3],c1,c2,c3); - mul_add_c(a[1],b[2],c1,c2,c3); - mul_add_c(a[2],b[1],c1,c2,c3); - mul_add_c(a[3],b[0],c1,c2,c3); - r[3]=c1; - c1=0; - mul_add_c(a[3],b[1],c2,c3,c1); - mul_add_c(a[2],b[2],c2,c3,c1); - mul_add_c(a[1],b[3],c2,c3,c1); - r[4]=c2; - c2=0; - mul_add_c(a[2],b[3],c3,c1,c2); - mul_add_c(a[3],b[2],c3,c1,c2); - r[5]=c3; - c3=0; - mul_add_c(a[3],b[3],c1,c2,c3); - r[6]=c1; - r[7]=c2; - } - -void bn_sqr_comba8(BN_ULONG *r, const BN_ULONG *a) - { - BN_ULONG t1,t2; - BN_ULONG c1,c2,c3; - - c1=0; - c2=0; - c3=0; - sqr_add_c(a,0,c1,c2,c3); - r[0]=c1; - c1=0; - sqr_add_c2(a,1,0,c2,c3,c1); - r[1]=c2; - c2=0; - sqr_add_c(a,1,c3,c1,c2); - sqr_add_c2(a,2,0,c3,c1,c2); - r[2]=c3; - c3=0; - sqr_add_c2(a,3,0,c1,c2,c3); - sqr_add_c2(a,2,1,c1,c2,c3); - r[3]=c1; - c1=0; - sqr_add_c(a,2,c2,c3,c1); - sqr_add_c2(a,3,1,c2,c3,c1); - sqr_add_c2(a,4,0,c2,c3,c1); - r[4]=c2; - c2=0; - sqr_add_c2(a,5,0,c3,c1,c2); - sqr_add_c2(a,4,1,c3,c1,c2); - sqr_add_c2(a,3,2,c3,c1,c2); - r[5]=c3; - c3=0; - sqr_add_c(a,3,c1,c2,c3); - sqr_add_c2(a,4,2,c1,c2,c3); - sqr_add_c2(a,5,1,c1,c2,c3); - sqr_add_c2(a,6,0,c1,c2,c3); - r[6]=c1; - c1=0; - sqr_add_c2(a,7,0,c2,c3,c1); - sqr_add_c2(a,6,1,c2,c3,c1); - sqr_add_c2(a,5,2,c2,c3,c1); - sqr_add_c2(a,4,3,c2,c3,c1); - r[7]=c2; - c2=0; - sqr_add_c(a,4,c3,c1,c2); - sqr_add_c2(a,5,3,c3,c1,c2); - sqr_add_c2(a,6,2,c3,c1,c2); - sqr_add_c2(a,7,1,c3,c1,c2); - r[8]=c3; - c3=0; - sqr_add_c2(a,7,2,c1,c2,c3); - sqr_add_c2(a,6,3,c1,c2,c3); - sqr_add_c2(a,5,4,c1,c2,c3); - r[9]=c1; - c1=0; - sqr_add_c(a,5,c2,c3,c1); - sqr_add_c2(a,6,4,c2,c3,c1); - sqr_add_c2(a,7,3,c2,c3,c1); - r[10]=c2; - c2=0; - sqr_add_c2(a,7,4,c3,c1,c2); - sqr_add_c2(a,6,5,c3,c1,c2); - r[11]=c3; - c3=0; - sqr_add_c(a,6,c1,c2,c3); - sqr_add_c2(a,7,5,c1,c2,c3); - r[12]=c1; - c1=0; - sqr_add_c2(a,7,6,c2,c3,c1); - r[13]=c2; - c2=0; - sqr_add_c(a,7,c3,c1,c2); - r[14]=c3; - r[15]=c1; - } - -void bn_sqr_comba4(BN_ULONG *r, const BN_ULONG *a) - { - BN_ULONG t1,t2; - BN_ULONG c1,c2,c3; - - c1=0; - c2=0; - c3=0; - sqr_add_c(a,0,c1,c2,c3); - r[0]=c1; - c1=0; - sqr_add_c2(a,1,0,c2,c3,c1); - r[1]=c2; - c2=0; - sqr_add_c(a,1,c3,c1,c2); - sqr_add_c2(a,2,0,c3,c1,c2); - r[2]=c3; - c3=0; - sqr_add_c2(a,3,0,c1,c2,c3); - sqr_add_c2(a,2,1,c1,c2,c3); - r[3]=c1; - c1=0; - sqr_add_c(a,2,c2,c3,c1); - sqr_add_c2(a,3,1,c2,c3,c1); - r[4]=c2; - c2=0; - sqr_add_c2(a,3,2,c3,c1,c2); - r[5]=c3; - c3=0; - sqr_add_c(a,3,c1,c2,c3); - r[6]=c1; - r[7]=c2; - } -#endif diff --git a/app/openssl/crypto/bn/asm/x86_64-mont.pl b/app/openssl/crypto/bn/asm/x86_64-mont.pl deleted file mode 100755 index 3b7a6f24..00000000 --- a/app/openssl/crypto/bn/asm/x86_64-mont.pl +++ /dev/null @@ -1,330 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# October 2005. -# -# Montgomery multiplication routine for x86_64. While it gives modest -# 9% improvement of rsa4096 sign on Opteron, rsa512 sign runs more -# than twice, >2x, as fast. Most common rsa1024 sign is improved by -# respectful 50%. It remains to be seen if loop unrolling and -# dedicated squaring routine can provide further improvement... - -$flavour = shift; -$output = shift; -if ($flavour =~ /\./) { $output = $flavour; undef $flavour; } - -$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/); - -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; -( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or -( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or -die "can't locate x86_64-xlate.pl"; - -open STDOUT,"| $^X $xlate $flavour $output"; - -# int bn_mul_mont( -$rp="%rdi"; # BN_ULONG *rp, -$ap="%rsi"; # const BN_ULONG *ap, -$bp="%rdx"; # const BN_ULONG *bp, -$np="%rcx"; # const BN_ULONG *np, -$n0="%r8"; # const BN_ULONG *n0, -$num="%r9"; # int num); -$lo0="%r10"; -$hi0="%r11"; -$bp="%r12"; # reassign $bp -$hi1="%r13"; -$i="%r14"; -$j="%r15"; -$m0="%rbx"; -$m1="%rbp"; - -$code=<<___; -.text - -.globl bn_mul_mont -.type bn_mul_mont,\@function,6 -.align 16 -bn_mul_mont: - push %rbx - push %rbp - push %r12 - push %r13 - push %r14 - push %r15 - - mov ${num}d,${num}d - lea 2($num),%r10 - mov %rsp,%r11 - neg %r10 - lea (%rsp,%r10,8),%rsp # tp=alloca(8*(num+2)) - and \$-1024,%rsp # minimize TLB usage - - mov %r11,8(%rsp,$num,8) # tp[num+1]=%rsp -.Lprologue: - mov %rdx,$bp # $bp reassigned, remember? - - mov ($n0),$n0 # pull n0[0] value - - xor $i,$i # i=0 - xor $j,$j # j=0 - - mov ($bp),$m0 # m0=bp[0] - mov ($ap),%rax - mulq $m0 # ap[0]*bp[0] - mov %rax,$lo0 - mov %rdx,$hi0 - - imulq $n0,%rax # "tp[0]"*n0 - mov %rax,$m1 - - mulq ($np) # np[0]*m1 - add $lo0,%rax # discarded - adc \$0,%rdx - mov %rdx,$hi1 - - lea 1($j),$j # j++ -.L1st: - mov ($ap,$j,8),%rax - mulq $m0 # ap[j]*bp[0] - add $hi0,%rax - adc \$0,%rdx - mov %rax,$lo0 - mov ($np,$j,8),%rax - mov %rdx,$hi0 - - mulq $m1 # np[j]*m1 - add $hi1,%rax - lea 1($j),$j # j++ - adc \$0,%rdx - add $lo0,%rax # np[j]*m1+ap[j]*bp[0] - adc \$0,%rdx - mov %rax,-16(%rsp,$j,8) # tp[j-1] - cmp $num,$j - mov %rdx,$hi1 - jl .L1st - - xor %rdx,%rdx - add $hi0,$hi1 - adc \$0,%rdx - mov $hi1,-8(%rsp,$num,8) - mov %rdx,(%rsp,$num,8) # store upmost overflow bit - - lea 1($i),$i # i++ -.align 4 -.Louter: - xor $j,$j # j=0 - - mov ($bp,$i,8),$m0 # m0=bp[i] - mov ($ap),%rax # ap[0] - mulq $m0 # ap[0]*bp[i] - add (%rsp),%rax # ap[0]*bp[i]+tp[0] - adc \$0,%rdx - mov %rax,$lo0 - mov %rdx,$hi0 - - imulq $n0,%rax # tp[0]*n0 - mov %rax,$m1 - - mulq ($np,$j,8) # np[0]*m1 - add $lo0,%rax # discarded - mov 8(%rsp),$lo0 # tp[1] - adc \$0,%rdx - mov %rdx,$hi1 - - lea 1($j),$j # j++ -.align 4 -.Linner: - mov ($ap,$j,8),%rax - mulq $m0 # ap[j]*bp[i] - add $hi0,%rax - adc \$0,%rdx - add %rax,$lo0 # ap[j]*bp[i]+tp[j] - mov ($np,$j,8),%rax - adc \$0,%rdx - mov %rdx,$hi0 - - mulq $m1 # np[j]*m1 - add $hi1,%rax - lea 1($j),$j # j++ - adc \$0,%rdx - add $lo0,%rax # np[j]*m1+ap[j]*bp[i]+tp[j] - adc \$0,%rdx - mov (%rsp,$j,8),$lo0 - cmp $num,$j - mov %rax,-16(%rsp,$j,8) # tp[j-1] - mov %rdx,$hi1 - jl .Linner - - xor %rdx,%rdx - add $hi0,$hi1 - adc \$0,%rdx - add $lo0,$hi1 # pull upmost overflow bit - adc \$0,%rdx - mov $hi1,-8(%rsp,$num,8) - mov %rdx,(%rsp,$num,8) # store upmost overflow bit - - lea 1($i),$i # i++ - cmp $num,$i - jl .Louter - - lea (%rsp),$ap # borrow ap for tp - lea -1($num),$j # j=num-1 - - mov ($ap),%rax # tp[0] - xor $i,$i # i=0 and clear CF! - jmp .Lsub -.align 16 -.Lsub: sbb ($np,$i,8),%rax - mov %rax,($rp,$i,8) # rp[i]=tp[i]-np[i] - dec $j # doesn't affect CF! - mov 8($ap,$i,8),%rax # tp[i+1] - lea 1($i),$i # i++ - jge .Lsub - - sbb \$0,%rax # handle upmost overflow bit - and %rax,$ap - not %rax - mov $rp,$np - and %rax,$np - lea -1($num),$j - or $np,$ap # ap=borrow?tp:rp -.align 16 -.Lcopy: # copy or in-place refresh - mov ($ap,$j,8),%rax - mov %rax,($rp,$j,8) # rp[i]=tp[i] - mov $i,(%rsp,$j,8) # zap temporary vector - dec $j - jge .Lcopy - - mov 8(%rsp,$num,8),%rsi # restore %rsp - mov \$1,%rax - mov (%rsi),%r15 - mov 8(%rsi),%r14 - mov 16(%rsi),%r13 - mov 24(%rsi),%r12 - mov 32(%rsi),%rbp - mov 40(%rsi),%rbx - lea 48(%rsi),%rsp -.Lepilogue: - ret -.size bn_mul_mont,.-bn_mul_mont -.asciz "Montgomery Multiplication for x86_64, CRYPTOGAMS by <appro\@openssl.org>" -.align 16 -___ - -# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame, -# CONTEXT *context,DISPATCHER_CONTEXT *disp) -if ($win64) { -$rec="%rcx"; -$frame="%rdx"; -$context="%r8"; -$disp="%r9"; - -$code.=<<___; -.extern __imp_RtlVirtualUnwind -.type se_handler,\@abi-omnipotent -.align 16 -se_handler: - push %rsi - push %rdi - push %rbx - push %rbp - push %r12 - push %r13 - push %r14 - push %r15 - pushfq - sub \$64,%rsp - - mov 120($context),%rax # pull context->Rax - mov 248($context),%rbx # pull context->Rip - - lea .Lprologue(%rip),%r10 - cmp %r10,%rbx # context->Rip<.Lprologue - jb .Lin_prologue - - mov 152($context),%rax # pull context->Rsp - - lea .Lepilogue(%rip),%r10 - cmp %r10,%rbx # context->Rip>=.Lepilogue - jae .Lin_prologue - - mov 192($context),%r10 # pull $num - mov 8(%rax,%r10,8),%rax # pull saved stack pointer - lea 48(%rax),%rax - - mov -8(%rax),%rbx - mov -16(%rax),%rbp - mov -24(%rax),%r12 - mov -32(%rax),%r13 - mov -40(%rax),%r14 - mov -48(%rax),%r15 - mov %rbx,144($context) # restore context->Rbx - mov %rbp,160($context) # restore context->Rbp - mov %r12,216($context) # restore context->R12 - mov %r13,224($context) # restore context->R13 - mov %r14,232($context) # restore context->R14 - mov %r15,240($context) # restore context->R15 - -.Lin_prologue: - mov 8(%rax),%rdi - mov 16(%rax),%rsi - mov %rax,152($context) # restore context->Rsp - mov %rsi,168($context) # restore context->Rsi - mov %rdi,176($context) # restore context->Rdi - - mov 40($disp),%rdi # disp->ContextRecord - mov $context,%rsi # context - mov \$154,%ecx # sizeof(CONTEXT) - .long 0xa548f3fc # cld; rep movsq - - mov $disp,%rsi - xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER - mov 8(%rsi),%rdx # arg2, disp->ImageBase - mov 0(%rsi),%r8 # arg3, disp->ControlPc - mov 16(%rsi),%r9 # arg4, disp->FunctionEntry - mov 40(%rsi),%r10 # disp->ContextRecord - lea 56(%rsi),%r11 # &disp->HandlerData - lea 24(%rsi),%r12 # &disp->EstablisherFrame - mov %r10,32(%rsp) # arg5 - mov %r11,40(%rsp) # arg6 - mov %r12,48(%rsp) # arg7 - mov %rcx,56(%rsp) # arg8, (NULL) - call *__imp_RtlVirtualUnwind(%rip) - - mov \$1,%eax # ExceptionContinueSearch - add \$64,%rsp - popfq - pop %r15 - pop %r14 - pop %r13 - pop %r12 - pop %rbp - pop %rbx - pop %rdi - pop %rsi - ret -.size se_handler,.-se_handler - -.section .pdata -.align 4 - .rva .LSEH_begin_bn_mul_mont - .rva .LSEH_end_bn_mul_mont - .rva .LSEH_info_bn_mul_mont - -.section .xdata -.align 8 -.LSEH_info_bn_mul_mont: - .byte 9,0,0,0 - .rva se_handler -___ -} - -print $code; -close STDOUT; diff --git a/app/openssl/crypto/bn/bn.h b/app/openssl/crypto/bn/bn.h deleted file mode 100644 index a0bc4783..00000000 --- a/app/openssl/crypto/bn/bn.h +++ /dev/null @@ -1,876 +0,0 @@ -/* crypto/bn/bn.h */ -/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ -/* ==================================================================== - * Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ -/* ==================================================================== - * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. - * - * Portions of the attached software ("Contribution") are developed by - * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project. - * - * The Contribution is licensed pursuant to the Eric Young open source - * license provided above. - * - * The binary polynomial arithmetic software is originally written by - * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories. - * - */ - -#ifndef HEADER_BN_H -#define HEADER_BN_H - -#include <openssl/e_os2.h> -#ifndef OPENSSL_NO_FP_API -#include <stdio.h> /* FILE */ -#endif -#include <openssl/ossl_typ.h> -#include <openssl/crypto.h> - -#ifdef __cplusplus -extern "C" { -#endif - -/* These preprocessor symbols control various aspects of the bignum headers and - * library code. They're not defined by any "normal" configuration, as they are - * intended for development and testing purposes. NB: defining all three can be - * useful for debugging application code as well as openssl itself. - * - * BN_DEBUG - turn on various debugging alterations to the bignum code - * BN_DEBUG_RAND - uses random poisoning of unused words to trip up - * mismanagement of bignum internals. You must also define BN_DEBUG. - */ -/* #define BN_DEBUG */ -/* #define BN_DEBUG_RAND */ - -#ifndef OPENSSL_SMALL_FOOTPRINT -#define BN_MUL_COMBA -#define BN_SQR_COMBA -#define BN_RECURSION -#endif - -/* This next option uses the C libraries (2 word)/(1 word) function. - * If it is not defined, I use my C version (which is slower). - * The reason for this flag is that when the particular C compiler - * library routine is used, and the library is linked with a different - * compiler, the library is missing. This mostly happens when the - * library is built with gcc and then linked using normal cc. This would - * be a common occurrence because gcc normally produces code that is - * 2 times faster than system compilers for the big number stuff. - * For machines with only one compiler (or shared libraries), this should - * be on. Again this in only really a problem on machines - * using "long long's", are 32bit, and are not using my assembler code. */ -#if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WINDOWS) || \ - defined(OPENSSL_SYS_WIN32) || defined(linux) -# ifndef BN_DIV2W -# define BN_DIV2W -# endif -#endif - -/* assuming long is 64bit - this is the DEC Alpha - * unsigned long long is only 64 bits :-(, don't define - * BN_LLONG for the DEC Alpha */ -#ifdef SIXTY_FOUR_BIT_LONG -#define BN_ULLONG unsigned long long -#define BN_ULONG unsigned long -#define BN_LONG long -#define BN_BITS 128 -#define BN_BYTES 8 -#define BN_BITS2 64 -#define BN_BITS4 32 -#define BN_MASK (0xffffffffffffffffffffffffffffffffLL) -#define BN_MASK2 (0xffffffffffffffffL) -#define BN_MASK2l (0xffffffffL) -#define BN_MASK2h (0xffffffff00000000L) -#define BN_MASK2h1 (0xffffffff80000000L) -#define BN_TBIT (0x8000000000000000L) -#define BN_DEC_CONV (10000000000000000000UL) -#define BN_DEC_FMT1 "%lu" -#define BN_DEC_FMT2 "%019lu" -#define BN_DEC_NUM 19 -#define BN_HEX_FMT1 "%lX" -#define BN_HEX_FMT2 "%016lX" -#endif - -/* This is where the long long data type is 64 bits, but long is 32. - * For machines where there are 64bit registers, this is the mode to use. - * IRIX, on R4000 and above should use this mode, along with the relevant - * assembler code :-). Do NOT define BN_LLONG. - */ -#ifdef SIXTY_FOUR_BIT -#undef BN_LLONG -#undef BN_ULLONG -#define BN_ULONG unsigned long long -#define BN_LONG long long -#define BN_BITS 128 -#define BN_BYTES 8 -#define BN_BITS2 64 -#define BN_BITS4 32 -#define BN_MASK2 (0xffffffffffffffffLL) -#define BN_MASK2l (0xffffffffL) -#define BN_MASK2h (0xffffffff00000000LL) -#define BN_MASK2h1 (0xffffffff80000000LL) -#define BN_TBIT (0x8000000000000000LL) -#define BN_DEC_CONV (10000000000000000000ULL) -#define BN_DEC_FMT1 "%llu" -#define BN_DEC_FMT2 "%019llu" -#define BN_DEC_NUM 19 -#define BN_HEX_FMT1 "%llX" -#define BN_HEX_FMT2 "%016llX" -#endif - -#ifdef THIRTY_TWO_BIT -#ifdef BN_LLONG -# if defined(_WIN32) && !defined(__GNUC__) -# define BN_ULLONG unsigned __int64 -# define BN_MASK (0xffffffffffffffffI64) -# else -# define BN_ULLONG unsigned long long -# define BN_MASK (0xffffffffffffffffLL) -# endif -#endif -#define BN_ULONG unsigned int -#define BN_LONG int -#define BN_BITS 64 -#define BN_BYTES 4 -#define BN_BITS2 32 -#define BN_BITS4 16 -#define BN_MASK2 (0xffffffffL) -#define BN_MASK2l (0xffff) -#define BN_MASK2h1 (0xffff8000L) -#define BN_MASK2h (0xffff0000L) -#define BN_TBIT (0x80000000L) -#define BN_DEC_CONV (1000000000L) -#define BN_DEC_FMT1 "%u" -#define BN_DEC_FMT2 "%09u" -#define BN_DEC_NUM 9 -#define BN_HEX_FMT1 "%X" -#define BN_HEX_FMT2 "%08X" -#endif - -/* 2011-02-22 SMS. - * In various places, a size_t variable or a type cast to size_t was - * used to perform integer-only operations on pointers. This failed on - * VMS with 64-bit pointers (CC /POINTER_SIZE = 64) because size_t is - * still only 32 bits. What's needed in these cases is an integer type - * with the same size as a pointer, which size_t is not certain to be. - * The only fix here is VMS-specific. - */ -#if defined(OPENSSL_SYS_VMS) -# if __INITIAL_POINTER_SIZE == 64 -# define PTR_SIZE_INT long long -# else /* __INITIAL_POINTER_SIZE == 64 */ -# define PTR_SIZE_INT int -# endif /* __INITIAL_POINTER_SIZE == 64 [else] */ -#else /* defined(OPENSSL_SYS_VMS) */ -# define PTR_SIZE_INT size_t -#endif /* defined(OPENSSL_SYS_VMS) [else] */ - -#define BN_DEFAULT_BITS 1280 - -#define BN_FLG_MALLOCED 0x01 -#define BN_FLG_STATIC_DATA 0x02 -#define BN_FLG_CONSTTIME 0x04 /* avoid leaking exponent information through timing, - * BN_mod_exp_mont() will call BN_mod_exp_mont_consttime, - * BN_div() will call BN_div_no_branch, - * BN_mod_inverse() will call BN_mod_inverse_no_branch. - */ - -#ifndef OPENSSL_NO_DEPRECATED -#define BN_FLG_EXP_CONSTTIME BN_FLG_CONSTTIME /* deprecated name for the flag */ - /* avoid leaking exponent information through timings - * (BN_mod_exp_mont() will call BN_mod_exp_mont_consttime) */ -#endif - -#ifndef OPENSSL_NO_DEPRECATED -#define BN_FLG_FREE 0x8000 /* used for debuging */ -#endif -#define BN_set_flags(b,n) ((b)->flags|=(n)) -#define BN_get_flags(b,n) ((b)->flags&(n)) - -/* get a clone of a BIGNUM with changed flags, for *temporary* use only - * (the two BIGNUMs cannot not be used in parallel!) */ -#define BN_with_flags(dest,b,n) ((dest)->d=(b)->d, \ - (dest)->top=(b)->top, \ - (dest)->dmax=(b)->dmax, \ - (dest)->neg=(b)->neg, \ - (dest)->flags=(((dest)->flags & BN_FLG_MALLOCED) \ - | ((b)->flags & ~BN_FLG_MALLOCED) \ - | BN_FLG_STATIC_DATA \ - | (n))) - -/* Already declared in ossl_typ.h */ -#if 0 -typedef struct bignum_st BIGNUM; -/* Used for temp variables (declaration hidden in bn_lcl.h) */ -typedef struct bignum_ctx BN_CTX; -typedef struct bn_blinding_st BN_BLINDING; -typedef struct bn_mont_ctx_st BN_MONT_CTX; -typedef struct bn_recp_ctx_st BN_RECP_CTX; -typedef struct bn_gencb_st BN_GENCB; -#endif - -struct bignum_st - { - BN_ULONG *d; /* Pointer to an array of 'BN_BITS2' bit chunks. */ - int top; /* Index of last used d +1. */ - /* The next are internal book keeping for bn_expand. */ - int dmax; /* Size of the d array. */ - int neg; /* one if the number is negative */ - int flags; - }; - -/* Used for montgomery multiplication */ -struct bn_mont_ctx_st - { - int ri; /* number of bits in R */ - BIGNUM RR; /* used to convert to montgomery form */ - BIGNUM N; /* The modulus */ - BIGNUM Ni; /* R*(1/R mod N) - N*Ni = 1 - * (Ni is only stored for bignum algorithm) */ - BN_ULONG n0[2];/* least significant word(s) of Ni; - (type changed with 0.9.9, was "BN_ULONG n0;" before) */ - int flags; - }; - -/* Used for reciprocal division/mod functions - * It cannot be shared between threads - */ -struct bn_recp_ctx_st - { - BIGNUM N; /* the divisor */ - BIGNUM Nr; /* the reciprocal */ - int num_bits; - int shift; - int flags; - }; - -/* Used for slow "generation" functions. */ -struct bn_gencb_st - { - unsigned int ver; /* To handle binary (in)compatibility */ - void *arg; /* callback-specific data */ - union - { - /* if(ver==1) - handles old style callbacks */ - void (*cb_1)(int, int, void *); - /* if(ver==2) - new callback style */ - int (*cb_2)(int, int, BN_GENCB *); - } cb; - }; -/* Wrapper function to make using BN_GENCB easier, */ -int BN_GENCB_call(BN_GENCB *cb, int a, int b); -/* Macro to populate a BN_GENCB structure with an "old"-style callback */ -#define BN_GENCB_set_old(gencb, callback, cb_arg) { \ - BN_GENCB *tmp_gencb = (gencb); \ - tmp_gencb->ver = 1; \ - tmp_gencb->arg = (cb_arg); \ - tmp_gencb->cb.cb_1 = (callback); } -/* Macro to populate a BN_GENCB structure with a "new"-style callback */ -#define BN_GENCB_set(gencb, callback, cb_arg) { \ - BN_GENCB *tmp_gencb = (gencb); \ - tmp_gencb->ver = 2; \ - tmp_gencb->arg = (cb_arg); \ - tmp_gencb->cb.cb_2 = (callback); } - -#define BN_prime_checks 0 /* default: select number of iterations - based on the size of the number */ - -/* number of Miller-Rabin iterations for an error rate of less than 2^-80 - * for random 'b'-bit input, b >= 100 (taken from table 4.4 in the Handbook - * of Applied Cryptography [Menezes, van Oorschot, Vanstone; CRC Press 1996]; - * original paper: Damgaard, Landrock, Pomerance: Average case error estimates - * for the strong probable prime test. -- Math. Comp. 61 (1993) 177-194) */ -#define BN_prime_checks_for_size(b) ((b) >= 1300 ? 2 : \ - (b) >= 850 ? 3 : \ - (b) >= 650 ? 4 : \ - (b) >= 550 ? 5 : \ - (b) >= 450 ? 6 : \ - (b) >= 400 ? 7 : \ - (b) >= 350 ? 8 : \ - (b) >= 300 ? 9 : \ - (b) >= 250 ? 12 : \ - (b) >= 200 ? 15 : \ - (b) >= 150 ? 18 : \ - /* b >= 100 */ 27) - -#define BN_num_bytes(a) ((BN_num_bits(a)+7)/8) - -/* Note that BN_abs_is_word didn't work reliably for w == 0 until 0.9.8 */ -#define BN_abs_is_word(a,w) ((((a)->top == 1) && ((a)->d[0] == (BN_ULONG)(w))) || \ - (((w) == 0) && ((a)->top == 0))) -#define BN_is_zero(a) ((a)->top == 0) -#define BN_is_one(a) (BN_abs_is_word((a),1) && !(a)->neg) -#define BN_is_word(a,w) (BN_abs_is_word((a),(w)) && (!(w) || !(a)->neg)) -#define BN_is_odd(a) (((a)->top > 0) && ((a)->d[0] & 1)) - -#define BN_one(a) (BN_set_word((a),1)) -#define BN_zero_ex(a) \ - do { \ - BIGNUM *_tmp_bn = (a); \ - _tmp_bn->top = 0; \ - _tmp_bn->neg = 0; \ - } while(0) -#ifdef OPENSSL_NO_DEPRECATED -#define BN_zero(a) BN_zero_ex(a) -#else -#define BN_zero(a) (BN_set_word((a),0)) -#endif - -const BIGNUM *BN_value_one(void); -char * BN_options(void); -BN_CTX *BN_CTX_new(void); -#ifndef OPENSSL_NO_DEPRECATED -void BN_CTX_init(BN_CTX *c); -#endif -void BN_CTX_free(BN_CTX *c); -void BN_CTX_start(BN_CTX *ctx); -BIGNUM *BN_CTX_get(BN_CTX *ctx); -void BN_CTX_end(BN_CTX *ctx); -int BN_rand(BIGNUM *rnd, int bits, int top,int bottom); -int BN_pseudo_rand(BIGNUM *rnd, int bits, int top,int bottom); -int BN_rand_range(BIGNUM *rnd, const BIGNUM *range); -int BN_pseudo_rand_range(BIGNUM *rnd, const BIGNUM *range); -int BN_num_bits(const BIGNUM *a); -int BN_num_bits_word(BN_ULONG); -BIGNUM *BN_new(void); -void BN_init(BIGNUM *); -void BN_clear_free(BIGNUM *a); -BIGNUM *BN_copy(BIGNUM *a, const BIGNUM *b); -void BN_swap(BIGNUM *a, BIGNUM *b); -BIGNUM *BN_bin2bn(const unsigned char *s,int len,BIGNUM *ret); -int BN_bn2bin(const BIGNUM *a, unsigned char *to); -BIGNUM *BN_mpi2bn(const unsigned char *s,int len,BIGNUM *ret); -int BN_bn2mpi(const BIGNUM *a, unsigned char *to); -int BN_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b); -int BN_usub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b); -int BN_uadd(BIGNUM *r, const BIGNUM *a, const BIGNUM *b); -int BN_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b); -int BN_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx); -int BN_sqr(BIGNUM *r, const BIGNUM *a,BN_CTX *ctx); -/** BN_set_negative sets sign of a BIGNUM - * \param b pointer to the BIGNUM object - * \param n 0 if the BIGNUM b should be positive and a value != 0 otherwise - */ -void BN_set_negative(BIGNUM *b, int n); -/** BN_is_negative returns 1 if the BIGNUM is negative - * \param a pointer to the BIGNUM object - * \return 1 if a < 0 and 0 otherwise - */ -#define BN_is_negative(a) ((a)->neg != 0) - -int BN_div(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m, const BIGNUM *d, - BN_CTX *ctx); -#define BN_mod(rem,m,d,ctx) BN_div(NULL,(rem),(m),(d),(ctx)) -int BN_nnmod(BIGNUM *r, const BIGNUM *m, const BIGNUM *d, BN_CTX *ctx); -int BN_mod_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m, BN_CTX *ctx); -int BN_mod_add_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m); -int BN_mod_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m, BN_CTX *ctx); -int BN_mod_sub_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m); -int BN_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, - const BIGNUM *m, BN_CTX *ctx); -int BN_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx); -int BN_mod_lshift1(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx); -int BN_mod_lshift1_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *m); -int BN_mod_lshift(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m, BN_CTX *ctx); -int BN_mod_lshift_quick(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m); - -BN_ULONG BN_mod_word(const BIGNUM *a, BN_ULONG w); -BN_ULONG BN_div_word(BIGNUM *a, BN_ULONG w); -int BN_mul_word(BIGNUM *a, BN_ULONG w); -int BN_add_word(BIGNUM *a, BN_ULONG w); -int BN_sub_word(BIGNUM *a, BN_ULONG w); -int BN_set_word(BIGNUM *a, BN_ULONG w); -BN_ULONG BN_get_word(const BIGNUM *a); - -int BN_cmp(const BIGNUM *a, const BIGNUM *b); -void BN_free(BIGNUM *a); -int BN_is_bit_set(const BIGNUM *a, int n); -int BN_lshift(BIGNUM *r, const BIGNUM *a, int n); -int BN_lshift1(BIGNUM *r, const BIGNUM *a); -int BN_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,BN_CTX *ctx); - -int BN_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, - const BIGNUM *m,BN_CTX *ctx); -int BN_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, - const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx); -int BN_mod_exp_mont_consttime(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p, - const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont); -int BN_mod_exp_mont_word(BIGNUM *r, BN_ULONG a, const BIGNUM *p, - const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx); -int BN_mod_exp2_mont(BIGNUM *r, const BIGNUM *a1, const BIGNUM *p1, - const BIGNUM *a2, const BIGNUM *p2,const BIGNUM *m, - BN_CTX *ctx,BN_MONT_CTX *m_ctx); -int BN_mod_exp_simple(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, - const BIGNUM *m,BN_CTX *ctx); - -int BN_mask_bits(BIGNUM *a,int n); -#ifndef OPENSSL_NO_FP_API -int BN_print_fp(FILE *fp, const BIGNUM *a); -#endif -#ifdef HEADER_BIO_H -int BN_print(BIO *fp, const BIGNUM *a); -#else -int BN_print(void *fp, const BIGNUM *a); -#endif -int BN_reciprocal(BIGNUM *r, const BIGNUM *m, int len, BN_CTX *ctx); -int BN_rshift(BIGNUM *r, const BIGNUM *a, int n); -int BN_rshift1(BIGNUM *r, const BIGNUM *a); -void BN_clear(BIGNUM *a); -BIGNUM *BN_dup(const BIGNUM *a); -int BN_ucmp(const BIGNUM *a, const BIGNUM *b); -int BN_set_bit(BIGNUM *a, int n); -int BN_clear_bit(BIGNUM *a, int n); -char * BN_bn2hex(const BIGNUM *a); -char * BN_bn2dec(const BIGNUM *a); -int BN_hex2bn(BIGNUM **a, const char *str); -int BN_dec2bn(BIGNUM **a, const char *str); -int BN_asc2bn(BIGNUM **a, const char *str); -int BN_gcd(BIGNUM *r,const BIGNUM *a,const BIGNUM *b,BN_CTX *ctx); -int BN_kronecker(const BIGNUM *a,const BIGNUM *b,BN_CTX *ctx); /* returns -2 for error */ -BIGNUM *BN_mod_inverse(BIGNUM *ret, - const BIGNUM *a, const BIGNUM *n,BN_CTX *ctx); -BIGNUM *BN_mod_sqrt(BIGNUM *ret, - const BIGNUM *a, const BIGNUM *n,BN_CTX *ctx); - -/* Deprecated versions */ -#ifndef OPENSSL_NO_DEPRECATED -BIGNUM *BN_generate_prime(BIGNUM *ret,int bits,int safe, - const BIGNUM *add, const BIGNUM *rem, - void (*callback)(int,int,void *),void *cb_arg); -int BN_is_prime(const BIGNUM *p,int nchecks, - void (*callback)(int,int,void *), - BN_CTX *ctx,void *cb_arg); -int BN_is_prime_fasttest(const BIGNUM *p,int nchecks, - void (*callback)(int,int,void *),BN_CTX *ctx,void *cb_arg, - int do_trial_division); -#endif /* !defined(OPENSSL_NO_DEPRECATED) */ - -/* Newer versions */ -int BN_generate_prime_ex(BIGNUM *ret,int bits,int safe, const BIGNUM *add, - const BIGNUM *rem, BN_GENCB *cb); -int BN_is_prime_ex(const BIGNUM *p,int nchecks, BN_CTX *ctx, BN_GENCB *cb); -int BN_is_prime_fasttest_ex(const BIGNUM *p,int nchecks, BN_CTX *ctx, - int do_trial_division, BN_GENCB *cb); - -BN_MONT_CTX *BN_MONT_CTX_new(void ); -void BN_MONT_CTX_init(BN_MONT_CTX *ctx); -int BN_mod_mul_montgomery(BIGNUM *r,const BIGNUM *a,const BIGNUM *b, - BN_MONT_CTX *mont, BN_CTX *ctx); -#define BN_to_montgomery(r,a,mont,ctx) BN_mod_mul_montgomery(\ - (r),(a),&((mont)->RR),(mont),(ctx)) -int BN_from_montgomery(BIGNUM *r,const BIGNUM *a, - BN_MONT_CTX *mont, BN_CTX *ctx); -void BN_MONT_CTX_free(BN_MONT_CTX *mont); -int BN_MONT_CTX_set(BN_MONT_CTX *mont,const BIGNUM *mod,BN_CTX *ctx); -BN_MONT_CTX *BN_MONT_CTX_copy(BN_MONT_CTX *to,BN_MONT_CTX *from); -BN_MONT_CTX *BN_MONT_CTX_set_locked(BN_MONT_CTX **pmont, int lock, - const BIGNUM *mod, BN_CTX *ctx); - -/* BN_BLINDING flags */ -#define BN_BLINDING_NO_UPDATE 0x00000001 -#define BN_BLINDING_NO_RECREATE 0x00000002 - -BN_BLINDING *BN_BLINDING_new(const BIGNUM *A, const BIGNUM *Ai, BIGNUM *mod); -void BN_BLINDING_free(BN_BLINDING *b); -int BN_BLINDING_update(BN_BLINDING *b,BN_CTX *ctx); -int BN_BLINDING_convert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx); -int BN_BLINDING_invert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx); -int BN_BLINDING_convert_ex(BIGNUM *n, BIGNUM *r, BN_BLINDING *b, BN_CTX *); -int BN_BLINDING_invert_ex(BIGNUM *n, const BIGNUM *r, BN_BLINDING *b, BN_CTX *); -#ifndef OPENSSL_NO_DEPRECATED -unsigned long BN_BLINDING_get_thread_id(const BN_BLINDING *); -void BN_BLINDING_set_thread_id(BN_BLINDING *, unsigned long); -#endif -CRYPTO_THREADID *BN_BLINDING_thread_id(BN_BLINDING *); -unsigned long BN_BLINDING_get_flags(const BN_BLINDING *); -void BN_BLINDING_set_flags(BN_BLINDING *, unsigned long); -BN_BLINDING *BN_BLINDING_create_param(BN_BLINDING *b, - const BIGNUM *e, BIGNUM *m, BN_CTX *ctx, - int (*bn_mod_exp)(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, - const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx), - BN_MONT_CTX *m_ctx); - -#ifndef OPENSSL_NO_DEPRECATED -void BN_set_params(int mul,int high,int low,int mont); -int BN_get_params(int which); /* 0, mul, 1 high, 2 low, 3 mont */ -#endif - -void BN_RECP_CTX_init(BN_RECP_CTX *recp); -BN_RECP_CTX *BN_RECP_CTX_new(void); -void BN_RECP_CTX_free(BN_RECP_CTX *recp); -int BN_RECP_CTX_set(BN_RECP_CTX *recp,const BIGNUM *rdiv,BN_CTX *ctx); -int BN_mod_mul_reciprocal(BIGNUM *r, const BIGNUM *x, const BIGNUM *y, - BN_RECP_CTX *recp,BN_CTX *ctx); -int BN_mod_exp_recp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, - const BIGNUM *m, BN_CTX *ctx); -int BN_div_recp(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m, - BN_RECP_CTX *recp, BN_CTX *ctx); - -/* Functions for arithmetic over binary polynomials represented by BIGNUMs. - * - * The BIGNUM::neg property of BIGNUMs representing binary polynomials is - * ignored. - * - * Note that input arguments are not const so that their bit arrays can - * be expanded to the appropriate size if needed. - */ - -int BN_GF2m_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b); /*r = a + b*/ -#define BN_GF2m_sub(r, a, b) BN_GF2m_add(r, a, b) -int BN_GF2m_mod(BIGNUM *r, const BIGNUM *a, const BIGNUM *p); /*r=a mod p*/ -int BN_GF2m_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, - const BIGNUM *p, BN_CTX *ctx); /* r = (a * b) mod p */ -int BN_GF2m_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, - BN_CTX *ctx); /* r = (a * a) mod p */ -int BN_GF2m_mod_inv(BIGNUM *r, const BIGNUM *b, const BIGNUM *p, - BN_CTX *ctx); /* r = (1 / b) mod p */ -int BN_GF2m_mod_div(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, - const BIGNUM *p, BN_CTX *ctx); /* r = (a / b) mod p */ -int BN_GF2m_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, - const BIGNUM *p, BN_CTX *ctx); /* r = (a ^ b) mod p */ -int BN_GF2m_mod_sqrt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, - BN_CTX *ctx); /* r = sqrt(a) mod p */ -int BN_GF2m_mod_solve_quad(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, - BN_CTX *ctx); /* r^2 + r = a mod p */ -#define BN_GF2m_cmp(a, b) BN_ucmp((a), (b)) -/* Some functions allow for representation of the irreducible polynomials - * as an unsigned int[], say p. The irreducible f(t) is then of the form: - * t^p[0] + t^p[1] + ... + t^p[k] - * where m = p[0] > p[1] > ... > p[k] = 0. - */ -int BN_GF2m_mod_arr(BIGNUM *r, const BIGNUM *a, const int p[]); - /* r = a mod p */ -int BN_GF2m_mod_mul_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, - const int p[], BN_CTX *ctx); /* r = (a * b) mod p */ -int BN_GF2m_mod_sqr_arr(BIGNUM *r, const BIGNUM *a, const int p[], - BN_CTX *ctx); /* r = (a * a) mod p */ -int BN_GF2m_mod_inv_arr(BIGNUM *r, const BIGNUM *b, const int p[], - BN_CTX *ctx); /* r = (1 / b) mod p */ -int BN_GF2m_mod_div_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, - const int p[], BN_CTX *ctx); /* r = (a / b) mod p */ -int BN_GF2m_mod_exp_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, - const int p[], BN_CTX *ctx); /* r = (a ^ b) mod p */ -int BN_GF2m_mod_sqrt_arr(BIGNUM *r, const BIGNUM *a, - const int p[], BN_CTX *ctx); /* r = sqrt(a) mod p */ -int BN_GF2m_mod_solve_quad_arr(BIGNUM *r, const BIGNUM *a, - const int p[], BN_CTX *ctx); /* r^2 + r = a mod p */ -int BN_GF2m_poly2arr(const BIGNUM *a, int p[], int max); -int BN_GF2m_arr2poly(const int p[], BIGNUM *a); - -/* faster mod functions for the 'NIST primes' - * 0 <= a < p^2 */ -int BN_nist_mod_192(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx); -int BN_nist_mod_224(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx); -int BN_nist_mod_256(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx); -int BN_nist_mod_384(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx); -int BN_nist_mod_521(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx); - -const BIGNUM *BN_get0_nist_prime_192(void); -const BIGNUM *BN_get0_nist_prime_224(void); -const BIGNUM *BN_get0_nist_prime_256(void); -const BIGNUM *BN_get0_nist_prime_384(void); -const BIGNUM *BN_get0_nist_prime_521(void); - -/* library internal functions */ - -#define bn_expand(a,bits) ((((((bits+BN_BITS2-1))/BN_BITS2)) <= (a)->dmax)?\ - (a):bn_expand2((a),(bits+BN_BITS2-1)/BN_BITS2)) -#define bn_wexpand(a,words) (((words) <= (a)->dmax)?(a):bn_expand2((a),(words))) -BIGNUM *bn_expand2(BIGNUM *a, int words); -#ifndef OPENSSL_NO_DEPRECATED -BIGNUM *bn_dup_expand(const BIGNUM *a, int words); /* unused */ -#endif - -/* Bignum consistency macros - * There is one "API" macro, bn_fix_top(), for stripping leading zeroes from - * bignum data after direct manipulations on the data. There is also an - * "internal" macro, bn_check_top(), for verifying that there are no leading - * zeroes. Unfortunately, some auditing is required due to the fact that - * bn_fix_top() has become an overabused duct-tape because bignum data is - * occasionally passed around in an inconsistent state. So the following - * changes have been made to sort this out; - * - bn_fix_top()s implementation has been moved to bn_correct_top() - * - if BN_DEBUG isn't defined, bn_fix_top() maps to bn_correct_top(), and - * bn_check_top() is as before. - * - if BN_DEBUG *is* defined; - * - bn_check_top() tries to pollute unused words even if the bignum 'top' is - * consistent. (ed: only if BN_DEBUG_RAND is defined) - * - bn_fix_top() maps to bn_check_top() rather than "fixing" anything. - * The idea is to have debug builds flag up inconsistent bignums when they - * occur. If that occurs in a bn_fix_top(), we examine the code in question; if - * the use of bn_fix_top() was appropriate (ie. it follows directly after code - * that manipulates the bignum) it is converted to bn_correct_top(), and if it - * was not appropriate, we convert it permanently to bn_check_top() and track - * down the cause of the bug. Eventually, no internal code should be using the - * bn_fix_top() macro. External applications and libraries should try this with - * their own code too, both in terms of building against the openssl headers - * with BN_DEBUG defined *and* linking with a version of OpenSSL built with it - * defined. This not only improves external code, it provides more test - * coverage for openssl's own code. - */ - -#ifdef BN_DEBUG - -/* We only need assert() when debugging */ -#include <assert.h> - -#ifdef BN_DEBUG_RAND -/* To avoid "make update" cvs wars due to BN_DEBUG, use some tricks */ -#ifndef RAND_pseudo_bytes -int RAND_pseudo_bytes(unsigned char *buf,int num); -#define BN_DEBUG_TRIX -#endif -#define bn_pollute(a) \ - do { \ - const BIGNUM *_bnum1 = (a); \ - if(_bnum1->top < _bnum1->dmax) { \ - unsigned char _tmp_char; \ - /* We cast away const without the compiler knowing, any \ - * *genuinely* constant variables that aren't mutable \ - * wouldn't be constructed with top!=dmax. */ \ - BN_ULONG *_not_const; \ - memcpy(&_not_const, &_bnum1->d, sizeof(BN_ULONG*)); \ - RAND_pseudo_bytes(&_tmp_char, 1); \ - memset((unsigned char *)(_not_const + _bnum1->top), _tmp_char, \ - (_bnum1->dmax - _bnum1->top) * sizeof(BN_ULONG)); \ - } \ - } while(0) -#ifdef BN_DEBUG_TRIX -#undef RAND_pseudo_bytes -#endif -#else -#define bn_pollute(a) -#endif -#define bn_check_top(a) \ - do { \ - const BIGNUM *_bnum2 = (a); \ - if (_bnum2 != NULL) { \ - assert((_bnum2->top == 0) || \ - (_bnum2->d[_bnum2->top - 1] != 0)); \ - bn_pollute(_bnum2); \ - } \ - } while(0) - -#define bn_fix_top(a) bn_check_top(a) - -#else /* !BN_DEBUG */ - -#define bn_pollute(a) -#define bn_check_top(a) -#define bn_fix_top(a) bn_correct_top(a) - -#endif - -#define bn_correct_top(a) \ - { \ - BN_ULONG *ftl; \ - int tmp_top = (a)->top; \ - if (tmp_top > 0) \ - { \ - for (ftl= &((a)->d[tmp_top-1]); tmp_top > 0; tmp_top--) \ - if (*(ftl--)) break; \ - (a)->top = tmp_top; \ - } \ - bn_pollute(a); \ - } - -BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w); -BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w); -void bn_sqr_words(BN_ULONG *rp, const BN_ULONG *ap, int num); -BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d); -BN_ULONG bn_add_words(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,int num); -BN_ULONG bn_sub_words(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,int num); - -/* Primes from RFC 2409 */ -BIGNUM *get_rfc2409_prime_768(BIGNUM *bn); -BIGNUM *get_rfc2409_prime_1024(BIGNUM *bn); - -/* Primes from RFC 3526 */ -BIGNUM *get_rfc3526_prime_1536(BIGNUM *bn); -BIGNUM *get_rfc3526_prime_2048(BIGNUM *bn); -BIGNUM *get_rfc3526_prime_3072(BIGNUM *bn); -BIGNUM *get_rfc3526_prime_4096(BIGNUM *bn); -BIGNUM *get_rfc3526_prime_6144(BIGNUM *bn); -BIGNUM *get_rfc3526_prime_8192(BIGNUM *bn); - -int BN_bntest_rand(BIGNUM *rnd, int bits, int top,int bottom); - -/* BEGIN ERROR CODES */ -/* The following lines are auto generated by the script mkerr.pl. Any changes - * made after this point may be overwritten when the script is next run. - */ -void ERR_load_BN_strings(void); - -/* Error codes for the BN functions. */ - -/* Function codes. */ -#define BN_F_BNRAND 127 -#define BN_F_BN_BLINDING_CONVERT_EX 100 -#define BN_F_BN_BLINDING_CREATE_PARAM 128 -#define BN_F_BN_BLINDING_INVERT_EX 101 -#define BN_F_BN_BLINDING_NEW 102 -#define BN_F_BN_BLINDING_UPDATE 103 -#define BN_F_BN_BN2DEC 104 -#define BN_F_BN_BN2HEX 105 -#define BN_F_BN_CTX_GET 116 -#define BN_F_BN_CTX_NEW 106 -#define BN_F_BN_CTX_START 129 -#define BN_F_BN_DIV 107 -#define BN_F_BN_DIV_NO_BRANCH 138 -#define BN_F_BN_DIV_RECP 130 -#define BN_F_BN_EXP 123 -#define BN_F_BN_EXPAND2 108 -#define BN_F_BN_EXPAND_INTERNAL 120 -#define BN_F_BN_GF2M_MOD 131 -#define BN_F_BN_GF2M_MOD_EXP 132 -#define BN_F_BN_GF2M_MOD_MUL 133 -#define BN_F_BN_GF2M_MOD_SOLVE_QUAD 134 -#define BN_F_BN_GF2M_MOD_SOLVE_QUAD_ARR 135 -#define BN_F_BN_GF2M_MOD_SQR 136 -#define BN_F_BN_GF2M_MOD_SQRT 137 -#define BN_F_BN_MOD_EXP2_MONT 118 -#define BN_F_BN_MOD_EXP_MONT 109 -#define BN_F_BN_MOD_EXP_MONT_CONSTTIME 124 -#define BN_F_BN_MOD_EXP_MONT_WORD 117 -#define BN_F_BN_MOD_EXP_RECP 125 -#define BN_F_BN_MOD_EXP_SIMPLE 126 -#define BN_F_BN_MOD_INVERSE 110 -#define BN_F_BN_MOD_INVERSE_NO_BRANCH 139 -#define BN_F_BN_MOD_LSHIFT_QUICK 119 -#define BN_F_BN_MOD_MUL_RECIPROCAL 111 -#define BN_F_BN_MOD_SQRT 121 -#define BN_F_BN_MPI2BN 112 -#define BN_F_BN_NEW 113 -#define BN_F_BN_RAND 114 -#define BN_F_BN_RAND_RANGE 122 -#define BN_F_BN_USUB 115 - -/* Reason codes. */ -#define BN_R_ARG2_LT_ARG3 100 -#define BN_R_BAD_RECIPROCAL 101 -#define BN_R_BIGNUM_TOO_LONG 114 -#define BN_R_CALLED_WITH_EVEN_MODULUS 102 -#define BN_R_DIV_BY_ZERO 103 -#define BN_R_ENCODING_ERROR 104 -#define BN_R_EXPAND_ON_STATIC_BIGNUM_DATA 105 -#define BN_R_INPUT_NOT_REDUCED 110 -#define BN_R_INVALID_LENGTH 106 -#define BN_R_INVALID_RANGE 115 -#define BN_R_NOT_A_SQUARE 111 -#define BN_R_NOT_INITIALIZED 107 -#define BN_R_NO_INVERSE 108 -#define BN_R_NO_SOLUTION 116 -#define BN_R_P_IS_NOT_PRIME 112 -#define BN_R_TOO_MANY_ITERATIONS 113 -#define BN_R_TOO_MANY_TEMPORARY_VARIABLES 109 - -#ifdef __cplusplus -} -#endif -#endif diff --git a/app/openssl/crypto/bn/bn.mul b/app/openssl/crypto/bn/bn.mul deleted file mode 100644 index 9728870d..00000000 --- a/app/openssl/crypto/bn/bn.mul +++ /dev/null @@ -1,19 +0,0 @@ -We need - -* bn_mul_comba8 -* bn_mul_comba4 -* bn_mul_normal -* bn_mul_recursive - -* bn_sqr_comba8 -* bn_sqr_comba4 -bn_sqr_normal -> BN_sqr -* bn_sqr_recursive - -* bn_mul_low_recursive -* bn_mul_low_normal -* bn_mul_high - -* bn_mul_part_recursive # symetric but not power of 2 - -bn_mul_asymetric_recursive # uneven, but do the chop up. diff --git a/app/openssl/crypto/bn/bn_add.c b/app/openssl/crypto/bn/bn_add.c deleted file mode 100644 index 94051637..00000000 --- a/app/openssl/crypto/bn/bn_add.c +++ /dev/null @@ -1,313 +0,0 @@ -/* crypto/bn/bn_add.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include "cryptlib.h" -#include "bn_lcl.h" - -/* r can == a or b */ -int BN_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b) - { - const BIGNUM *tmp; - int a_neg = a->neg, ret; - - bn_check_top(a); - bn_check_top(b); - - /* a + b a+b - * a + -b a-b - * -a + b b-a - * -a + -b -(a+b) - */ - if (a_neg ^ b->neg) - { - /* only one is negative */ - if (a_neg) - { tmp=a; a=b; b=tmp; } - - /* we are now a - b */ - - if (BN_ucmp(a,b) < 0) - { - if (!BN_usub(r,b,a)) return(0); - r->neg=1; - } - else - { - if (!BN_usub(r,a,b)) return(0); - r->neg=0; - } - return(1); - } - - ret = BN_uadd(r,a,b); - r->neg = a_neg; - bn_check_top(r); - return ret; - } - -/* unsigned add of b to a */ -int BN_uadd(BIGNUM *r, const BIGNUM *a, const BIGNUM *b) - { - int max,min,dif; - BN_ULONG *ap,*bp,*rp,carry,t1,t2; - const BIGNUM *tmp; - - bn_check_top(a); - bn_check_top(b); - - if (a->top < b->top) - { tmp=a; a=b; b=tmp; } - max = a->top; - min = b->top; - dif = max - min; - - if (bn_wexpand(r,max+1) == NULL) - return 0; - - r->top=max; - - - ap=a->d; - bp=b->d; - rp=r->d; - - carry=bn_add_words(rp,ap,bp,min); - rp+=min; - ap+=min; - bp+=min; - - if (carry) - { - while (dif) - { - dif--; - t1 = *(ap++); - t2 = (t1+1) & BN_MASK2; - *(rp++) = t2; - if (t2) - { - carry=0; - break; - } - } - if (carry) - { - /* carry != 0 => dif == 0 */ - *rp = 1; - r->top++; - } - } - if (dif && rp != ap) - while (dif--) - /* copy remaining words if ap != rp */ - *(rp++) = *(ap++); - r->neg = 0; - bn_check_top(r); - return 1; - } - -/* unsigned subtraction of b from a, a must be larger than b. */ -int BN_usub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b) - { - int max,min,dif; - register BN_ULONG t1,t2,*ap,*bp,*rp; - int i,carry; -#if defined(IRIX_CC_BUG) && !defined(LINT) - int dummy; -#endif - - bn_check_top(a); - bn_check_top(b); - - max = a->top; - min = b->top; - dif = max - min; - - if (dif < 0) /* hmm... should not be happening */ - { - BNerr(BN_F_BN_USUB,BN_R_ARG2_LT_ARG3); - return(0); - } - - if (bn_wexpand(r,max) == NULL) return(0); - - ap=a->d; - bp=b->d; - rp=r->d; - -#if 1 - carry=0; - for (i = min; i != 0; i--) - { - t1= *(ap++); - t2= *(bp++); - if (carry) - { - carry=(t1 <= t2); - t1=(t1-t2-1)&BN_MASK2; - } - else - { - carry=(t1 < t2); - t1=(t1-t2)&BN_MASK2; - } -#if defined(IRIX_CC_BUG) && !defined(LINT) - dummy=t1; -#endif - *(rp++)=t1&BN_MASK2; - } -#else - carry=bn_sub_words(rp,ap,bp,min); - ap+=min; - bp+=min; - rp+=min; -#endif - if (carry) /* subtracted */ - { - if (!dif) - /* error: a < b */ - return 0; - while (dif) - { - dif--; - t1 = *(ap++); - t2 = (t1-1)&BN_MASK2; - *(rp++) = t2; - if (t1) - break; - } - } -#if 0 - memcpy(rp,ap,sizeof(*rp)*(max-i)); -#else - if (rp != ap) - { - for (;;) - { - if (!dif--) break; - rp[0]=ap[0]; - if (!dif--) break; - rp[1]=ap[1]; - if (!dif--) break; - rp[2]=ap[2]; - if (!dif--) break; - rp[3]=ap[3]; - rp+=4; - ap+=4; - } - } -#endif - - r->top=max; - r->neg=0; - bn_correct_top(r); - return(1); - } - -int BN_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b) - { - int max; - int add=0,neg=0; - const BIGNUM *tmp; - - bn_check_top(a); - bn_check_top(b); - - /* a - b a-b - * a - -b a+b - * -a - b -(a+b) - * -a - -b b-a - */ - if (a->neg) - { - if (b->neg) - { tmp=a; a=b; b=tmp; } - else - { add=1; neg=1; } - } - else - { - if (b->neg) { add=1; neg=0; } - } - - if (add) - { - if (!BN_uadd(r,a,b)) return(0); - r->neg=neg; - return(1); - } - - /* We are actually doing a - b :-) */ - - max=(a->top > b->top)?a->top:b->top; - if (bn_wexpand(r,max) == NULL) return(0); - if (BN_ucmp(a,b) < 0) - { - if (!BN_usub(r,b,a)) return(0); - r->neg=1; - } - else - { - if (!BN_usub(r,a,b)) return(0); - r->neg=0; - } - bn_check_top(r); - return(1); - } - diff --git a/app/openssl/crypto/bn/bn_asm.c b/app/openssl/crypto/bn/bn_asm.c deleted file mode 100644 index c43c91cc..00000000 --- a/app/openssl/crypto/bn/bn_asm.c +++ /dev/null @@ -1,1030 +0,0 @@ -/* crypto/bn/bn_asm.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#ifndef BN_DEBUG -# undef NDEBUG /* avoid conflicting definitions */ -# define NDEBUG -#endif - -#include <stdio.h> -#include <assert.h> -#include "cryptlib.h" -#include "bn_lcl.h" - -#if defined(BN_LLONG) || defined(BN_UMULT_HIGH) - -BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w) - { - BN_ULONG c1=0; - - assert(num >= 0); - if (num <= 0) return(c1); - -#ifndef OPENSSL_SMALL_FOOTPRINT - while (num&~3) - { - mul_add(rp[0],ap[0],w,c1); - mul_add(rp[1],ap[1],w,c1); - mul_add(rp[2],ap[2],w,c1); - mul_add(rp[3],ap[3],w,c1); - ap+=4; rp+=4; num-=4; - } -#endif - while (num) - { - mul_add(rp[0],ap[0],w,c1); - ap++; rp++; num--; - } - - return(c1); - } - -BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w) - { - BN_ULONG c1=0; - - assert(num >= 0); - if (num <= 0) return(c1); - -#ifndef OPENSSL_SMALL_FOOTPRINT - while (num&~3) - { - mul(rp[0],ap[0],w,c1); - mul(rp[1],ap[1],w,c1); - mul(rp[2],ap[2],w,c1); - mul(rp[3],ap[3],w,c1); - ap+=4; rp+=4; num-=4; - } -#endif - while (num) - { - mul(rp[0],ap[0],w,c1); - ap++; rp++; num--; - } - return(c1); - } - -void bn_sqr_words(BN_ULONG *r, const BN_ULONG *a, int n) - { - assert(n >= 0); - if (n <= 0) return; - -#ifndef OPENSSL_SMALL_FOOTPRINT - while (n&~3) - { - sqr(r[0],r[1],a[0]); - sqr(r[2],r[3],a[1]); - sqr(r[4],r[5],a[2]); - sqr(r[6],r[7],a[3]); - a+=4; r+=8; n-=4; - } -#endif - while (n) - { - sqr(r[0],r[1],a[0]); - a++; r+=2; n--; - } - } - -#else /* !(defined(BN_LLONG) || defined(BN_UMULT_HIGH)) */ - -BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w) - { - BN_ULONG c=0; - BN_ULONG bl,bh; - - assert(num >= 0); - if (num <= 0) return((BN_ULONG)0); - - bl=LBITS(w); - bh=HBITS(w); - -#ifndef OPENSSL_SMALL_FOOTPRINT - while (num&~3) - { - mul_add(rp[0],ap[0],bl,bh,c); - mul_add(rp[1],ap[1],bl,bh,c); - mul_add(rp[2],ap[2],bl,bh,c); - mul_add(rp[3],ap[3],bl,bh,c); - ap+=4; rp+=4; num-=4; - } -#endif - while (num) - { - mul_add(rp[0],ap[0],bl,bh,c); - ap++; rp++; num--; - } - return(c); - } - -BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w) - { - BN_ULONG carry=0; - BN_ULONG bl,bh; - - assert(num >= 0); - if (num <= 0) return((BN_ULONG)0); - - bl=LBITS(w); - bh=HBITS(w); - -#ifndef OPENSSL_SMALL_FOOTPRINT - while (num&~3) - { - mul(rp[0],ap[0],bl,bh,carry); - mul(rp[1],ap[1],bl,bh,carry); - mul(rp[2],ap[2],bl,bh,carry); - mul(rp[3],ap[3],bl,bh,carry); - ap+=4; rp+=4; num-=4; - } -#endif - while (num) - { - mul(rp[0],ap[0],bl,bh,carry); - ap++; rp++; num--; - } - return(carry); - } - -void bn_sqr_words(BN_ULONG *r, const BN_ULONG *a, int n) - { - assert(n >= 0); - if (n <= 0) return; - -#ifndef OPENSSL_SMALL_FOOTPRINT - while (n&~3) - { - sqr64(r[0],r[1],a[0]); - sqr64(r[2],r[3],a[1]); - sqr64(r[4],r[5],a[2]); - sqr64(r[6],r[7],a[3]); - a+=4; r+=8; n-=4; - } -#endif - while (n) - { - sqr64(r[0],r[1],a[0]); - a++; r+=2; n--; - } - } - -#endif /* !(defined(BN_LLONG) || defined(BN_UMULT_HIGH)) */ - -#if defined(BN_LLONG) && defined(BN_DIV2W) - -BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d) - { - return((BN_ULONG)(((((BN_ULLONG)h)<<BN_BITS2)|l)/(BN_ULLONG)d)); - } - -#else - -/* Divide h,l by d and return the result. */ -/* I need to test this some more :-( */ -BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d) - { - BN_ULONG dh,dl,q,ret=0,th,tl,t; - int i,count=2; - - if (d == 0) return(BN_MASK2); - - i=BN_num_bits_word(d); - assert((i == BN_BITS2) || (h <= (BN_ULONG)1<<i)); - - i=BN_BITS2-i; - if (h >= d) h-=d; - - if (i) - { - d<<=i; - h=(h<<i)|(l>>(BN_BITS2-i)); - l<<=i; - } - dh=(d&BN_MASK2h)>>BN_BITS4; - dl=(d&BN_MASK2l); - for (;;) - { - if ((h>>BN_BITS4) == dh) - q=BN_MASK2l; - else - q=h/dh; - - th=q*dh; - tl=dl*q; - for (;;) - { - t=h-th; - if ((t&BN_MASK2h) || - ((tl) <= ( - (t<<BN_BITS4)| - ((l&BN_MASK2h)>>BN_BITS4)))) - break; - q--; - th-=dh; - tl-=dl; - } - t=(tl>>BN_BITS4); - tl=(tl<<BN_BITS4)&BN_MASK2h; - th+=t; - - if (l < tl) th++; - l-=tl; - if (h < th) - { - h+=d; - q--; - } - h-=th; - - if (--count == 0) break; - - ret=q<<BN_BITS4; - h=((h<<BN_BITS4)|(l>>BN_BITS4))&BN_MASK2; - l=(l&BN_MASK2l)<<BN_BITS4; - } - ret|=q; - return(ret); - } -#endif /* !defined(BN_LLONG) && defined(BN_DIV2W) */ - -#ifdef BN_LLONG -BN_ULONG bn_add_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int n) - { - BN_ULLONG ll=0; - - assert(n >= 0); - if (n <= 0) return((BN_ULONG)0); - -#ifndef OPENSSL_SMALL_FOOTPRINT - while (n&~3) - { - ll+=(BN_ULLONG)a[0]+b[0]; - r[0]=(BN_ULONG)ll&BN_MASK2; - ll>>=BN_BITS2; - ll+=(BN_ULLONG)a[1]+b[1]; - r[1]=(BN_ULONG)ll&BN_MASK2; - ll>>=BN_BITS2; - ll+=(BN_ULLONG)a[2]+b[2]; - r[2]=(BN_ULONG)ll&BN_MASK2; - ll>>=BN_BITS2; - ll+=(BN_ULLONG)a[3]+b[3]; - r[3]=(BN_ULONG)ll&BN_MASK2; - ll>>=BN_BITS2; - a+=4; b+=4; r+=4; n-=4; - } -#endif - while (n) - { - ll+=(BN_ULLONG)a[0]+b[0]; - r[0]=(BN_ULONG)ll&BN_MASK2; - ll>>=BN_BITS2; - a++; b++; r++; n--; - } - return((BN_ULONG)ll); - } -#else /* !BN_LLONG */ -BN_ULONG bn_add_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int n) - { - BN_ULONG c,l,t; - - assert(n >= 0); - if (n <= 0) return((BN_ULONG)0); - - c=0; -#ifndef OPENSSL_SMALL_FOOTPRINT - while (n&~3) - { - t=a[0]; - t=(t+c)&BN_MASK2; - c=(t < c); - l=(t+b[0])&BN_MASK2; - c+=(l < t); - r[0]=l; - t=a[1]; - t=(t+c)&BN_MASK2; - c=(t < c); - l=(t+b[1])&BN_MASK2; - c+=(l < t); - r[1]=l; - t=a[2]; - t=(t+c)&BN_MASK2; - c=(t < c); - l=(t+b[2])&BN_MASK2; - c+=(l < t); - r[2]=l; - t=a[3]; - t=(t+c)&BN_MASK2; - c=(t < c); - l=(t+b[3])&BN_MASK2; - c+=(l < t); - r[3]=l; - a+=4; b+=4; r+=4; n-=4; - } -#endif - while(n) - { - t=a[0]; - t=(t+c)&BN_MASK2; - c=(t < c); - l=(t+b[0])&BN_MASK2; - c+=(l < t); - r[0]=l; - a++; b++; r++; n--; - } - return((BN_ULONG)c); - } -#endif /* !BN_LLONG */ - -BN_ULONG bn_sub_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int n) - { - BN_ULONG t1,t2; - int c=0; - - assert(n >= 0); - if (n <= 0) return((BN_ULONG)0); - -#ifndef OPENSSL_SMALL_FOOTPRINT - while (n&~3) - { - t1=a[0]; t2=b[0]; - r[0]=(t1-t2-c)&BN_MASK2; - if (t1 != t2) c=(t1 < t2); - t1=a[1]; t2=b[1]; - r[1]=(t1-t2-c)&BN_MASK2; - if (t1 != t2) c=(t1 < t2); - t1=a[2]; t2=b[2]; - r[2]=(t1-t2-c)&BN_MASK2; - if (t1 != t2) c=(t1 < t2); - t1=a[3]; t2=b[3]; - r[3]=(t1-t2-c)&BN_MASK2; - if (t1 != t2) c=(t1 < t2); - a+=4; b+=4; r+=4; n-=4; - } -#endif - while (n) - { - t1=a[0]; t2=b[0]; - r[0]=(t1-t2-c)&BN_MASK2; - if (t1 != t2) c=(t1 < t2); - a++; b++; r++; n--; - } - return(c); - } - -#if defined(BN_MUL_COMBA) && !defined(OPENSSL_SMALL_FOOTPRINT) - -#undef bn_mul_comba8 -#undef bn_mul_comba4 -#undef bn_sqr_comba8 -#undef bn_sqr_comba4 - -/* mul_add_c(a,b,c0,c1,c2) -- c+=a*b for three word number c=(c2,c1,c0) */ -/* mul_add_c2(a,b,c0,c1,c2) -- c+=2*a*b for three word number c=(c2,c1,c0) */ -/* sqr_add_c(a,i,c0,c1,c2) -- c+=a[i]^2 for three word number c=(c2,c1,c0) */ -/* sqr_add_c2(a,i,c0,c1,c2) -- c+=2*a[i]*a[j] for three word number c=(c2,c1,c0) */ - -#ifdef BN_LLONG -#define mul_add_c(a,b,c0,c1,c2) \ - t=(BN_ULLONG)a*b; \ - t1=(BN_ULONG)Lw(t); \ - t2=(BN_ULONG)Hw(t); \ - c0=(c0+t1)&BN_MASK2; if ((c0) < t1) t2++; \ - c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++; - -#define mul_add_c2(a,b,c0,c1,c2) \ - t=(BN_ULLONG)a*b; \ - tt=(t+t)&BN_MASK; \ - if (tt < t) c2++; \ - t1=(BN_ULONG)Lw(tt); \ - t2=(BN_ULONG)Hw(tt); \ - c0=(c0+t1)&BN_MASK2; \ - if ((c0 < t1) && (((++t2)&BN_MASK2) == 0)) c2++; \ - c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++; - -#define sqr_add_c(a,i,c0,c1,c2) \ - t=(BN_ULLONG)a[i]*a[i]; \ - t1=(BN_ULONG)Lw(t); \ - t2=(BN_ULONG)Hw(t); \ - c0=(c0+t1)&BN_MASK2; if ((c0) < t1) t2++; \ - c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++; - -#define sqr_add_c2(a,i,j,c0,c1,c2) \ - mul_add_c2((a)[i],(a)[j],c0,c1,c2) - -#elif defined(BN_UMULT_LOHI) - -#define mul_add_c(a,b,c0,c1,c2) { \ - BN_ULONG ta=(a),tb=(b); \ - BN_UMULT_LOHI(t1,t2,ta,tb); \ - c0 += t1; t2 += (c0<t1)?1:0; \ - c1 += t2; c2 += (c1<t2)?1:0; \ - } - -#define mul_add_c2(a,b,c0,c1,c2) { \ - BN_ULONG ta=(a),tb=(b),t0; \ - BN_UMULT_LOHI(t0,t1,ta,tb); \ - t2 = t1+t1; c2 += (t2<t1)?1:0; \ - t1 = t0+t0; t2 += (t1<t0)?1:0; \ - c0 += t1; t2 += (c0<t1)?1:0; \ - c1 += t2; c2 += (c1<t2)?1:0; \ - } - -#define sqr_add_c(a,i,c0,c1,c2) { \ - BN_ULONG ta=(a)[i]; \ - BN_UMULT_LOHI(t1,t2,ta,ta); \ - c0 += t1; t2 += (c0<t1)?1:0; \ - c1 += t2; c2 += (c1<t2)?1:0; \ - } - -#define sqr_add_c2(a,i,j,c0,c1,c2) \ - mul_add_c2((a)[i],(a)[j],c0,c1,c2) - -#elif defined(BN_UMULT_HIGH) - -#define mul_add_c(a,b,c0,c1,c2) { \ - BN_ULONG ta=(a),tb=(b); \ - t1 = ta * tb; \ - t2 = BN_UMULT_HIGH(ta,tb); \ - c0 += t1; t2 += (c0<t1)?1:0; \ - c1 += t2; c2 += (c1<t2)?1:0; \ - } - -#define mul_add_c2(a,b,c0,c1,c2) { \ - BN_ULONG ta=(a),tb=(b),t0; \ - t1 = BN_UMULT_HIGH(ta,tb); \ - t0 = ta * tb; \ - t2 = t1+t1; c2 += (t2<t1)?1:0; \ - t1 = t0+t0; t2 += (t1<t0)?1:0; \ - c0 += t1; t2 += (c0<t1)?1:0; \ - c1 += t2; c2 += (c1<t2)?1:0; \ - } - -#define sqr_add_c(a,i,c0,c1,c2) { \ - BN_ULONG ta=(a)[i]; \ - t1 = ta * ta; \ - t2 = BN_UMULT_HIGH(ta,ta); \ - c0 += t1; t2 += (c0<t1)?1:0; \ - c1 += t2; c2 += (c1<t2)?1:0; \ - } - -#define sqr_add_c2(a,i,j,c0,c1,c2) \ - mul_add_c2((a)[i],(a)[j],c0,c1,c2) - -#else /* !BN_LLONG */ -#define mul_add_c(a,b,c0,c1,c2) \ - t1=LBITS(a); t2=HBITS(a); \ - bl=LBITS(b); bh=HBITS(b); \ - mul64(t1,t2,bl,bh); \ - c0=(c0+t1)&BN_MASK2; if ((c0) < t1) t2++; \ - c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++; - -#define mul_add_c2(a,b,c0,c1,c2) \ - t1=LBITS(a); t2=HBITS(a); \ - bl=LBITS(b); bh=HBITS(b); \ - mul64(t1,t2,bl,bh); \ - if (t2 & BN_TBIT) c2++; \ - t2=(t2+t2)&BN_MASK2; \ - if (t1 & BN_TBIT) t2++; \ - t1=(t1+t1)&BN_MASK2; \ - c0=(c0+t1)&BN_MASK2; \ - if ((c0 < t1) && (((++t2)&BN_MASK2) == 0)) c2++; \ - c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++; - -#define sqr_add_c(a,i,c0,c1,c2) \ - sqr64(t1,t2,(a)[i]); \ - c0=(c0+t1)&BN_MASK2; if ((c0) < t1) t2++; \ - c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++; - -#define sqr_add_c2(a,i,j,c0,c1,c2) \ - mul_add_c2((a)[i],(a)[j],c0,c1,c2) -#endif /* !BN_LLONG */ - -void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) - { -#ifdef BN_LLONG - BN_ULLONG t; -#else - BN_ULONG bl,bh; -#endif - BN_ULONG t1,t2; - BN_ULONG c1,c2,c3; - - c1=0; - c2=0; - c3=0; - mul_add_c(a[0],b[0],c1,c2,c3); - r[0]=c1; - c1=0; - mul_add_c(a[0],b[1],c2,c3,c1); - mul_add_c(a[1],b[0],c2,c3,c1); - r[1]=c2; - c2=0; - mul_add_c(a[2],b[0],c3,c1,c2); - mul_add_c(a[1],b[1],c3,c1,c2); - mul_add_c(a[0],b[2],c3,c1,c2); - r[2]=c3; - c3=0; - mul_add_c(a[0],b[3],c1,c2,c3); - mul_add_c(a[1],b[2],c1,c2,c3); - mul_add_c(a[2],b[1],c1,c2,c3); - mul_add_c(a[3],b[0],c1,c2,c3); - r[3]=c1; - c1=0; - mul_add_c(a[4],b[0],c2,c3,c1); - mul_add_c(a[3],b[1],c2,c3,c1); - mul_add_c(a[2],b[2],c2,c3,c1); - mul_add_c(a[1],b[3],c2,c3,c1); - mul_add_c(a[0],b[4],c2,c3,c1); - r[4]=c2; - c2=0; - mul_add_c(a[0],b[5],c3,c1,c2); - mul_add_c(a[1],b[4],c3,c1,c2); - mul_add_c(a[2],b[3],c3,c1,c2); - mul_add_c(a[3],b[2],c3,c1,c2); - mul_add_c(a[4],b[1],c3,c1,c2); - mul_add_c(a[5],b[0],c3,c1,c2); - r[5]=c3; - c3=0; - mul_add_c(a[6],b[0],c1,c2,c3); - mul_add_c(a[5],b[1],c1,c2,c3); - mul_add_c(a[4],b[2],c1,c2,c3); - mul_add_c(a[3],b[3],c1,c2,c3); - mul_add_c(a[2],b[4],c1,c2,c3); - mul_add_c(a[1],b[5],c1,c2,c3); - mul_add_c(a[0],b[6],c1,c2,c3); - r[6]=c1; - c1=0; - mul_add_c(a[0],b[7],c2,c3,c1); - mul_add_c(a[1],b[6],c2,c3,c1); - mul_add_c(a[2],b[5],c2,c3,c1); - mul_add_c(a[3],b[4],c2,c3,c1); - mul_add_c(a[4],b[3],c2,c3,c1); - mul_add_c(a[5],b[2],c2,c3,c1); - mul_add_c(a[6],b[1],c2,c3,c1); - mul_add_c(a[7],b[0],c2,c3,c1); - r[7]=c2; - c2=0; - mul_add_c(a[7],b[1],c3,c1,c2); - mul_add_c(a[6],b[2],c3,c1,c2); - mul_add_c(a[5],b[3],c3,c1,c2); - mul_add_c(a[4],b[4],c3,c1,c2); - mul_add_c(a[3],b[5],c3,c1,c2); - mul_add_c(a[2],b[6],c3,c1,c2); - mul_add_c(a[1],b[7],c3,c1,c2); - r[8]=c3; - c3=0; - mul_add_c(a[2],b[7],c1,c2,c3); - mul_add_c(a[3],b[6],c1,c2,c3); - mul_add_c(a[4],b[5],c1,c2,c3); - mul_add_c(a[5],b[4],c1,c2,c3); - mul_add_c(a[6],b[3],c1,c2,c3); - mul_add_c(a[7],b[2],c1,c2,c3); - r[9]=c1; - c1=0; - mul_add_c(a[7],b[3],c2,c3,c1); - mul_add_c(a[6],b[4],c2,c3,c1); - mul_add_c(a[5],b[5],c2,c3,c1); - mul_add_c(a[4],b[6],c2,c3,c1); - mul_add_c(a[3],b[7],c2,c3,c1); - r[10]=c2; - c2=0; - mul_add_c(a[4],b[7],c3,c1,c2); - mul_add_c(a[5],b[6],c3,c1,c2); - mul_add_c(a[6],b[5],c3,c1,c2); - mul_add_c(a[7],b[4],c3,c1,c2); - r[11]=c3; - c3=0; - mul_add_c(a[7],b[5],c1,c2,c3); - mul_add_c(a[6],b[6],c1,c2,c3); - mul_add_c(a[5],b[7],c1,c2,c3); - r[12]=c1; - c1=0; - mul_add_c(a[6],b[7],c2,c3,c1); - mul_add_c(a[7],b[6],c2,c3,c1); - r[13]=c2; - c2=0; - mul_add_c(a[7],b[7],c3,c1,c2); - r[14]=c3; - r[15]=c1; - } - -void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) - { -#ifdef BN_LLONG - BN_ULLONG t; -#else - BN_ULONG bl,bh; -#endif - BN_ULONG t1,t2; - BN_ULONG c1,c2,c3; - - c1=0; - c2=0; - c3=0; - mul_add_c(a[0],b[0],c1,c2,c3); - r[0]=c1; - c1=0; - mul_add_c(a[0],b[1],c2,c3,c1); - mul_add_c(a[1],b[0],c2,c3,c1); - r[1]=c2; - c2=0; - mul_add_c(a[2],b[0],c3,c1,c2); - mul_add_c(a[1],b[1],c3,c1,c2); - mul_add_c(a[0],b[2],c3,c1,c2); - r[2]=c3; - c3=0; - mul_add_c(a[0],b[3],c1,c2,c3); - mul_add_c(a[1],b[2],c1,c2,c3); - mul_add_c(a[2],b[1],c1,c2,c3); - mul_add_c(a[3],b[0],c1,c2,c3); - r[3]=c1; - c1=0; - mul_add_c(a[3],b[1],c2,c3,c1); - mul_add_c(a[2],b[2],c2,c3,c1); - mul_add_c(a[1],b[3],c2,c3,c1); - r[4]=c2; - c2=0; - mul_add_c(a[2],b[3],c3,c1,c2); - mul_add_c(a[3],b[2],c3,c1,c2); - r[5]=c3; - c3=0; - mul_add_c(a[3],b[3],c1,c2,c3); - r[6]=c1; - r[7]=c2; - } - -void bn_sqr_comba8(BN_ULONG *r, const BN_ULONG *a) - { -#ifdef BN_LLONG - BN_ULLONG t,tt; -#else - BN_ULONG bl,bh; -#endif - BN_ULONG t1,t2; - BN_ULONG c1,c2,c3; - - c1=0; - c2=0; - c3=0; - sqr_add_c(a,0,c1,c2,c3); - r[0]=c1; - c1=0; - sqr_add_c2(a,1,0,c2,c3,c1); - r[1]=c2; - c2=0; - sqr_add_c(a,1,c3,c1,c2); - sqr_add_c2(a,2,0,c3,c1,c2); - r[2]=c3; - c3=0; - sqr_add_c2(a,3,0,c1,c2,c3); - sqr_add_c2(a,2,1,c1,c2,c3); - r[3]=c1; - c1=0; - sqr_add_c(a,2,c2,c3,c1); - sqr_add_c2(a,3,1,c2,c3,c1); - sqr_add_c2(a,4,0,c2,c3,c1); - r[4]=c2; - c2=0; - sqr_add_c2(a,5,0,c3,c1,c2); - sqr_add_c2(a,4,1,c3,c1,c2); - sqr_add_c2(a,3,2,c3,c1,c2); - r[5]=c3; - c3=0; - sqr_add_c(a,3,c1,c2,c3); - sqr_add_c2(a,4,2,c1,c2,c3); - sqr_add_c2(a,5,1,c1,c2,c3); - sqr_add_c2(a,6,0,c1,c2,c3); - r[6]=c1; - c1=0; - sqr_add_c2(a,7,0,c2,c3,c1); - sqr_add_c2(a,6,1,c2,c3,c1); - sqr_add_c2(a,5,2,c2,c3,c1); - sqr_add_c2(a,4,3,c2,c3,c1); - r[7]=c2; - c2=0; - sqr_add_c(a,4,c3,c1,c2); - sqr_add_c2(a,5,3,c3,c1,c2); - sqr_add_c2(a,6,2,c3,c1,c2); - sqr_add_c2(a,7,1,c3,c1,c2); - r[8]=c3; - c3=0; - sqr_add_c2(a,7,2,c1,c2,c3); - sqr_add_c2(a,6,3,c1,c2,c3); - sqr_add_c2(a,5,4,c1,c2,c3); - r[9]=c1; - c1=0; - sqr_add_c(a,5,c2,c3,c1); - sqr_add_c2(a,6,4,c2,c3,c1); - sqr_add_c2(a,7,3,c2,c3,c1); - r[10]=c2; - c2=0; - sqr_add_c2(a,7,4,c3,c1,c2); - sqr_add_c2(a,6,5,c3,c1,c2); - r[11]=c3; - c3=0; - sqr_add_c(a,6,c1,c2,c3); - sqr_add_c2(a,7,5,c1,c2,c3); - r[12]=c1; - c1=0; - sqr_add_c2(a,7,6,c2,c3,c1); - r[13]=c2; - c2=0; - sqr_add_c(a,7,c3,c1,c2); - r[14]=c3; - r[15]=c1; - } - -void bn_sqr_comba4(BN_ULONG *r, const BN_ULONG *a) - { -#ifdef BN_LLONG - BN_ULLONG t,tt; -#else - BN_ULONG bl,bh; -#endif - BN_ULONG t1,t2; - BN_ULONG c1,c2,c3; - - c1=0; - c2=0; - c3=0; - sqr_add_c(a,0,c1,c2,c3); - r[0]=c1; - c1=0; - sqr_add_c2(a,1,0,c2,c3,c1); - r[1]=c2; - c2=0; - sqr_add_c(a,1,c3,c1,c2); - sqr_add_c2(a,2,0,c3,c1,c2); - r[2]=c3; - c3=0; - sqr_add_c2(a,3,0,c1,c2,c3); - sqr_add_c2(a,2,1,c1,c2,c3); - r[3]=c1; - c1=0; - sqr_add_c(a,2,c2,c3,c1); - sqr_add_c2(a,3,1,c2,c3,c1); - r[4]=c2; - c2=0; - sqr_add_c2(a,3,2,c3,c1,c2); - r[5]=c3; - c3=0; - sqr_add_c(a,3,c1,c2,c3); - r[6]=c1; - r[7]=c2; - } - -#ifdef OPENSSL_NO_ASM -#ifdef OPENSSL_BN_ASM_MONT -#include <alloca.h> -/* - * This is essentially reference implementation, which may or may not - * result in performance improvement. E.g. on IA-32 this routine was - * observed to give 40% faster rsa1024 private key operations and 10% - * faster rsa4096 ones, while on AMD64 it improves rsa1024 sign only - * by 10% and *worsens* rsa4096 sign by 15%. Once again, it's a - * reference implementation, one to be used as starting point for - * platform-specific assembler. Mentioned numbers apply to compiler - * generated code compiled with and without -DOPENSSL_BN_ASM_MONT and - * can vary not only from platform to platform, but even for compiler - * versions. Assembler vs. assembler improvement coefficients can - * [and are known to] differ and are to be documented elsewhere. - */ -int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0p, int num) - { - BN_ULONG c0,c1,ml,*tp,n0; -#ifdef mul64 - BN_ULONG mh; -#endif - volatile BN_ULONG *vp; - int i=0,j; - -#if 0 /* template for platform-specific implementation */ - if (ap==bp) return bn_sqr_mont(rp,ap,np,n0p,num); -#endif - vp = tp = alloca((num+2)*sizeof(BN_ULONG)); - - n0 = *n0p; - - c0 = 0; - ml = bp[0]; -#ifdef mul64 - mh = HBITS(ml); - ml = LBITS(ml); - for (j=0;j<num;++j) - mul(tp[j],ap[j],ml,mh,c0); -#else - for (j=0;j<num;++j) - mul(tp[j],ap[j],ml,c0); -#endif - - tp[num] = c0; - tp[num+1] = 0; - goto enter; - - for(i=0;i<num;i++) - { - c0 = 0; - ml = bp[i]; -#ifdef mul64 - mh = HBITS(ml); - ml = LBITS(ml); - for (j=0;j<num;++j) - mul_add(tp[j],ap[j],ml,mh,c0); -#else - for (j=0;j<num;++j) - mul_add(tp[j],ap[j],ml,c0); -#endif - c1 = (tp[num] + c0)&BN_MASK2; - tp[num] = c1; - tp[num+1] = (c1<c0?1:0); - enter: - c1 = tp[0]; - ml = (c1*n0)&BN_MASK2; - c0 = 0; -#ifdef mul64 - mh = HBITS(ml); - ml = LBITS(ml); - mul_add(c1,np[0],ml,mh,c0); -#else - mul_add(c1,ml,np[0],c0); -#endif - for(j=1;j<num;j++) - { - c1 = tp[j]; -#ifdef mul64 - mul_add(c1,np[j],ml,mh,c0); -#else - mul_add(c1,ml,np[j],c0); -#endif - tp[j-1] = c1&BN_MASK2; - } - c1 = (tp[num] + c0)&BN_MASK2; - tp[num-1] = c1; - tp[num] = tp[num+1] + (c1<c0?1:0); - } - - if (tp[num]!=0 || tp[num-1]>=np[num-1]) - { - c0 = bn_sub_words(rp,tp,np,num); - if (tp[num]!=0 || c0==0) - { - for(i=0;i<num+2;i++) vp[i] = 0; - return 1; - } - } - for(i=0;i<num;i++) rp[i] = tp[i], vp[i] = 0; - vp[num] = 0; - vp[num+1] = 0; - return 1; - } -#else -/* - * Return value of 0 indicates that multiplication/convolution was not - * performed to signal the caller to fall down to alternative/original - * code-path. - */ -int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0, int num) -{ return 0; } -#endif /* OPENSSL_BN_ASM_MONT */ -#endif - -#else /* !BN_MUL_COMBA */ - -/* hmm... is it faster just to do a multiply? */ -#undef bn_sqr_comba4 -void bn_sqr_comba4(BN_ULONG *r, const BN_ULONG *a) - { - BN_ULONG t[8]; - bn_sqr_normal(r,a,4,t); - } - -#undef bn_sqr_comba8 -void bn_sqr_comba8(BN_ULONG *r, const BN_ULONG *a) - { - BN_ULONG t[16]; - bn_sqr_normal(r,a,8,t); - } - -void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) - { - r[4]=bn_mul_words( &(r[0]),a,4,b[0]); - r[5]=bn_mul_add_words(&(r[1]),a,4,b[1]); - r[6]=bn_mul_add_words(&(r[2]),a,4,b[2]); - r[7]=bn_mul_add_words(&(r[3]),a,4,b[3]); - } - -void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b) - { - r[ 8]=bn_mul_words( &(r[0]),a,8,b[0]); - r[ 9]=bn_mul_add_words(&(r[1]),a,8,b[1]); - r[10]=bn_mul_add_words(&(r[2]),a,8,b[2]); - r[11]=bn_mul_add_words(&(r[3]),a,8,b[3]); - r[12]=bn_mul_add_words(&(r[4]),a,8,b[4]); - r[13]=bn_mul_add_words(&(r[5]),a,8,b[5]); - r[14]=bn_mul_add_words(&(r[6]),a,8,b[6]); - r[15]=bn_mul_add_words(&(r[7]),a,8,b[7]); - } - -#ifdef OPENSSL_NO_ASM -#ifdef OPENSSL_BN_ASM_MONT -#include <alloca.h> -int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0p, int num) - { - BN_ULONG c0,c1,*tp,n0=*n0p; - volatile BN_ULONG *vp; - int i=0,j; - - vp = tp = alloca((num+2)*sizeof(BN_ULONG)); - - for(i=0;i<=num;i++) tp[i]=0; - - for(i=0;i<num;i++) - { - c0 = bn_mul_add_words(tp,ap,num,bp[i]); - c1 = (tp[num] + c0)&BN_MASK2; - tp[num] = c1; - tp[num+1] = (c1<c0?1:0); - - c0 = bn_mul_add_words(tp,np,num,tp[0]*n0); - c1 = (tp[num] + c0)&BN_MASK2; - tp[num] = c1; - tp[num+1] += (c1<c0?1:0); - for(j=0;j<=num;j++) tp[j]=tp[j+1]; - } - - if (tp[num]!=0 || tp[num-1]>=np[num-1]) - { - c0 = bn_sub_words(rp,tp,np,num); - if (tp[num]!=0 || c0==0) - { - for(i=0;i<num+2;i++) vp[i] = 0; - return 1; - } - } - for(i=0;i<num;i++) rp[i] = tp[i], vp[i] = 0; - vp[num] = 0; - vp[num+1] = 0; - return 1; - } -#else -int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0, int num) -{ return 0; } -#endif /* OPENSSL_BN_ASM_MONT */ -#endif - -#endif /* !BN_MUL_COMBA */ diff --git a/app/openssl/crypto/bn/bn_blind.c b/app/openssl/crypto/bn/bn_blind.c deleted file mode 100644 index e060592f..00000000 --- a/app/openssl/crypto/bn/bn_blind.c +++ /dev/null @@ -1,376 +0,0 @@ -/* crypto/bn/bn_blind.c */ -/* ==================================================================== - * Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include "cryptlib.h" -#include "bn_lcl.h" - -#define BN_BLINDING_COUNTER 32 - -struct bn_blinding_st - { - BIGNUM *A; - BIGNUM *Ai; - BIGNUM *e; - BIGNUM *mod; /* just a reference */ -#ifndef OPENSSL_NO_DEPRECATED - unsigned long thread_id; /* added in OpenSSL 0.9.6j and 0.9.7b; - * used only by crypto/rsa/rsa_eay.c, rsa_lib.c */ -#endif - CRYPTO_THREADID tid; - unsigned int counter; - unsigned long flags; - BN_MONT_CTX *m_ctx; - int (*bn_mod_exp)(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, - const BIGNUM *m, BN_CTX *ctx, - BN_MONT_CTX *m_ctx); - }; - -BN_BLINDING *BN_BLINDING_new(const BIGNUM *A, const BIGNUM *Ai, BIGNUM *mod) - { - BN_BLINDING *ret=NULL; - - bn_check_top(mod); - - if ((ret=(BN_BLINDING *)OPENSSL_malloc(sizeof(BN_BLINDING))) == NULL) - { - BNerr(BN_F_BN_BLINDING_NEW,ERR_R_MALLOC_FAILURE); - return(NULL); - } - memset(ret,0,sizeof(BN_BLINDING)); - if (A != NULL) - { - if ((ret->A = BN_dup(A)) == NULL) goto err; - } - if (Ai != NULL) - { - if ((ret->Ai = BN_dup(Ai)) == NULL) goto err; - } - - /* save a copy of mod in the BN_BLINDING structure */ - if ((ret->mod = BN_dup(mod)) == NULL) goto err; - if (BN_get_flags(mod, BN_FLG_CONSTTIME) != 0) - BN_set_flags(ret->mod, BN_FLG_CONSTTIME); - - ret->counter = BN_BLINDING_COUNTER; - CRYPTO_THREADID_current(&ret->tid); - return(ret); -err: - if (ret != NULL) BN_BLINDING_free(ret); - return(NULL); - } - -void BN_BLINDING_free(BN_BLINDING *r) - { - if(r == NULL) - return; - - if (r->A != NULL) BN_free(r->A ); - if (r->Ai != NULL) BN_free(r->Ai); - if (r->e != NULL) BN_free(r->e ); - if (r->mod != NULL) BN_free(r->mod); - OPENSSL_free(r); - } - -int BN_BLINDING_update(BN_BLINDING *b, BN_CTX *ctx) - { - int ret=0; - - if ((b->A == NULL) || (b->Ai == NULL)) - { - BNerr(BN_F_BN_BLINDING_UPDATE,BN_R_NOT_INITIALIZED); - goto err; - } - - if (--(b->counter) == 0 && b->e != NULL && - !(b->flags & BN_BLINDING_NO_RECREATE)) - { - /* re-create blinding parameters */ - if (!BN_BLINDING_create_param(b, NULL, NULL, ctx, NULL, NULL)) - goto err; - } - else if (!(b->flags & BN_BLINDING_NO_UPDATE)) - { - if (!BN_mod_mul(b->A,b->A,b->A,b->mod,ctx)) goto err; - if (!BN_mod_mul(b->Ai,b->Ai,b->Ai,b->mod,ctx)) goto err; - } - - ret=1; -err: - if (b->counter == 0) - b->counter = BN_BLINDING_COUNTER; - return(ret); - } - -int BN_BLINDING_convert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx) - { - return BN_BLINDING_convert_ex(n, NULL, b, ctx); - } - -int BN_BLINDING_convert_ex(BIGNUM *n, BIGNUM *r, BN_BLINDING *b, BN_CTX *ctx) - { - int ret = 1; - - bn_check_top(n); - - if ((b->A == NULL) || (b->Ai == NULL)) - { - BNerr(BN_F_BN_BLINDING_CONVERT_EX,BN_R_NOT_INITIALIZED); - return(0); - } - - if (r != NULL) - { - if (!BN_copy(r, b->Ai)) ret=0; - } - - if (!BN_mod_mul(n,n,b->A,b->mod,ctx)) ret=0; - - return ret; - } - -int BN_BLINDING_invert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx) - { - return BN_BLINDING_invert_ex(n, NULL, b, ctx); - } - -int BN_BLINDING_invert_ex(BIGNUM *n, const BIGNUM *r, BN_BLINDING *b, BN_CTX *ctx) - { - int ret; - - bn_check_top(n); - if ((b->A == NULL) || (b->Ai == NULL)) - { - BNerr(BN_F_BN_BLINDING_INVERT_EX,BN_R_NOT_INITIALIZED); - return(0); - } - - if (r != NULL) - ret = BN_mod_mul(n, n, r, b->mod, ctx); - else - ret = BN_mod_mul(n, n, b->Ai, b->mod, ctx); - - if (ret >= 0) - { - if (!BN_BLINDING_update(b,ctx)) - return(0); - } - bn_check_top(n); - return(ret); - } - -#ifndef OPENSSL_NO_DEPRECATED -unsigned long BN_BLINDING_get_thread_id(const BN_BLINDING *b) - { - return b->thread_id; - } - -void BN_BLINDING_set_thread_id(BN_BLINDING *b, unsigned long n) - { - b->thread_id = n; - } -#endif - -CRYPTO_THREADID *BN_BLINDING_thread_id(BN_BLINDING *b) - { - return &b->tid; - } - -unsigned long BN_BLINDING_get_flags(const BN_BLINDING *b) - { - return b->flags; - } - -void BN_BLINDING_set_flags(BN_BLINDING *b, unsigned long flags) - { - b->flags = flags; - } - -BN_BLINDING *BN_BLINDING_create_param(BN_BLINDING *b, - const BIGNUM *e, BIGNUM *m, BN_CTX *ctx, - int (*bn_mod_exp)(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, - const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx), - BN_MONT_CTX *m_ctx) -{ - int retry_counter = 32; - BN_BLINDING *ret = NULL; - - if (b == NULL) - ret = BN_BLINDING_new(NULL, NULL, m); - else - ret = b; - - if (ret == NULL) - goto err; - - if (ret->A == NULL && (ret->A = BN_new()) == NULL) - goto err; - if (ret->Ai == NULL && (ret->Ai = BN_new()) == NULL) - goto err; - - if (e != NULL) - { - if (ret->e != NULL) - BN_free(ret->e); - ret->e = BN_dup(e); - } - if (ret->e == NULL) - goto err; - - if (bn_mod_exp != NULL) - ret->bn_mod_exp = bn_mod_exp; - if (m_ctx != NULL) - ret->m_ctx = m_ctx; - - do { - if (!BN_rand_range(ret->A, ret->mod)) goto err; - if (BN_mod_inverse(ret->Ai, ret->A, ret->mod, ctx) == NULL) - { - /* this should almost never happen for good RSA keys */ - unsigned long error = ERR_peek_last_error(); - if (ERR_GET_REASON(error) == BN_R_NO_INVERSE) - { - if (retry_counter-- == 0) - { - BNerr(BN_F_BN_BLINDING_CREATE_PARAM, - BN_R_TOO_MANY_ITERATIONS); - goto err; - } - ERR_clear_error(); - } - else - goto err; - } - else - break; - } while (1); - - if (ret->bn_mod_exp != NULL && ret->m_ctx != NULL) - { - if (!ret->bn_mod_exp(ret->A, ret->A, ret->e, ret->mod, ctx, ret->m_ctx)) - goto err; - } - else - { - if (!BN_mod_exp(ret->A, ret->A, ret->e, ret->mod, ctx)) - goto err; - } - - return ret; -err: - if (b == NULL && ret != NULL) - { - BN_BLINDING_free(ret); - ret = NULL; - } - - return ret; -} diff --git a/app/openssl/crypto/bn/bn_const.c b/app/openssl/crypto/bn/bn_const.c deleted file mode 100755 index eb60a25b..00000000 --- a/app/openssl/crypto/bn/bn_const.c +++ /dev/null @@ -1,402 +0,0 @@ -/* crypto/bn/knownprimes.c */ -/* Insert boilerplate */ - -#include "bn.h" - -/* "First Oakley Default Group" from RFC2409, section 6.1. - * - * The prime is: 2^768 - 2 ^704 - 1 + 2^64 * { [2^638 pi] + 149686 } - * - * RFC2409 specifies a generator of 2. - * RFC2412 specifies a generator of of 22. - */ - -BIGNUM *get_rfc2409_prime_768(BIGNUM *bn) - { - static const unsigned char RFC2409_PRIME_768[]={ - 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2, - 0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1, - 0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6, - 0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD, - 0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D, - 0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45, - 0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9, - 0xA6,0x3A,0x36,0x20,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, - }; - return BN_bin2bn(RFC2409_PRIME_768,sizeof(RFC2409_PRIME_768),bn); - } - -/* "Second Oakley Default Group" from RFC2409, section 6.2. - * - * The prime is: 2^1024 - 2^960 - 1 + 2^64 * { [2^894 pi] + 129093 }. - * - * RFC2409 specifies a generator of 2. - * RFC2412 specifies a generator of 22. - */ - -BIGNUM *get_rfc2409_prime_1024(BIGNUM *bn) - { - static const unsigned char RFC2409_PRIME_1024[]={ - 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2, - 0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1, - 0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6, - 0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD, - 0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D, - 0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45, - 0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9, - 0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED, - 0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11, - 0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE6,0x53,0x81, - 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, - }; - return BN_bin2bn(RFC2409_PRIME_1024,sizeof(RFC2409_PRIME_1024),bn); - } - -/* "1536-bit MODP Group" from RFC3526, Section 2. - * - * The prime is: 2^1536 - 2^1472 - 1 + 2^64 * { [2^1406 pi] + 741804 } - * - * RFC3526 specifies a generator of 2. - * RFC2312 specifies a generator of 22. - */ - -BIGNUM *get_rfc3526_prime_1536(BIGNUM *bn) - { - static const unsigned char RFC3526_PRIME_1536[]={ - 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2, - 0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1, - 0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6, - 0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD, - 0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D, - 0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45, - 0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9, - 0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED, - 0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11, - 0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D, - 0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36, - 0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F, - 0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56, - 0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D, - 0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08, - 0xCA,0x23,0x73,0x27,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, - }; - return BN_bin2bn(RFC3526_PRIME_1536,sizeof(RFC3526_PRIME_1536),bn); - } - -/* "2048-bit MODP Group" from RFC3526, Section 3. - * - * The prime is: 2^2048 - 2^1984 - 1 + 2^64 * { [2^1918 pi] + 124476 } - * - * RFC3526 specifies a generator of 2. - */ - -BIGNUM *get_rfc3526_prime_2048(BIGNUM *bn) - { - static const unsigned char RFC3526_PRIME_2048[]={ - 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2, - 0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1, - 0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6, - 0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD, - 0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D, - 0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45, - 0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9, - 0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED, - 0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11, - 0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D, - 0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36, - 0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F, - 0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56, - 0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D, - 0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08, - 0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B, - 0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2, - 0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9, - 0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C, - 0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10, - 0x15,0x72,0x8E,0x5A,0x8A,0xAC,0xAA,0x68,0xFF,0xFF,0xFF,0xFF, - 0xFF,0xFF,0xFF,0xFF, - }; - return BN_bin2bn(RFC3526_PRIME_2048,sizeof(RFC3526_PRIME_2048),bn); - } - -/* "3072-bit MODP Group" from RFC3526, Section 4. - * - * The prime is: 2^3072 - 2^3008 - 1 + 2^64 * { [2^2942 pi] + 1690314 } - * - * RFC3526 specifies a generator of 2. - */ - -BIGNUM *get_rfc3526_prime_3072(BIGNUM *bn) - { - static const unsigned char RFC3526_PRIME_3072[]={ - 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2, - 0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1, - 0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6, - 0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD, - 0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D, - 0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45, - 0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9, - 0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED, - 0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11, - 0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D, - 0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36, - 0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F, - 0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56, - 0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D, - 0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08, - 0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B, - 0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2, - 0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9, - 0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C, - 0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10, - 0x15,0x72,0x8E,0x5A,0x8A,0xAA,0xC4,0x2D,0xAD,0x33,0x17,0x0D, - 0x04,0x50,0x7A,0x33,0xA8,0x55,0x21,0xAB,0xDF,0x1C,0xBA,0x64, - 0xEC,0xFB,0x85,0x04,0x58,0xDB,0xEF,0x0A,0x8A,0xEA,0x71,0x57, - 0x5D,0x06,0x0C,0x7D,0xB3,0x97,0x0F,0x85,0xA6,0xE1,0xE4,0xC7, - 0xAB,0xF5,0xAE,0x8C,0xDB,0x09,0x33,0xD7,0x1E,0x8C,0x94,0xE0, - 0x4A,0x25,0x61,0x9D,0xCE,0xE3,0xD2,0x26,0x1A,0xD2,0xEE,0x6B, - 0xF1,0x2F,0xFA,0x06,0xD9,0x8A,0x08,0x64,0xD8,0x76,0x02,0x73, - 0x3E,0xC8,0x6A,0x64,0x52,0x1F,0x2B,0x18,0x17,0x7B,0x20,0x0C, - 0xBB,0xE1,0x17,0x57,0x7A,0x61,0x5D,0x6C,0x77,0x09,0x88,0xC0, - 0xBA,0xD9,0x46,0xE2,0x08,0xE2,0x4F,0xA0,0x74,0xE5,0xAB,0x31, - 0x43,0xDB,0x5B,0xFC,0xE0,0xFD,0x10,0x8E,0x4B,0x82,0xD1,0x20, - 0xA9,0x3A,0xD2,0xCA,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, - }; - return BN_bin2bn(RFC3526_PRIME_3072,sizeof(RFC3526_PRIME_3072),bn); - } - -/* "4096-bit MODP Group" from RFC3526, Section 5. - * - * The prime is: 2^4096 - 2^4032 - 1 + 2^64 * { [2^3966 pi] + 240904 } - * - * RFC3526 specifies a generator of 2. - */ - -BIGNUM *get_rfc3526_prime_4096(BIGNUM *bn) - { - static const unsigned char RFC3526_PRIME_4096[]={ - 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2, - 0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1, - 0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6, - 0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD, - 0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D, - 0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45, - 0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9, - 0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED, - 0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11, - 0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D, - 0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36, - 0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F, - 0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56, - 0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D, - 0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08, - 0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B, - 0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2, - 0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9, - 0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C, - 0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10, - 0x15,0x72,0x8E,0x5A,0x8A,0xAA,0xC4,0x2D,0xAD,0x33,0x17,0x0D, - 0x04,0x50,0x7A,0x33,0xA8,0x55,0x21,0xAB,0xDF,0x1C,0xBA,0x64, - 0xEC,0xFB,0x85,0x04,0x58,0xDB,0xEF,0x0A,0x8A,0xEA,0x71,0x57, - 0x5D,0x06,0x0C,0x7D,0xB3,0x97,0x0F,0x85,0xA6,0xE1,0xE4,0xC7, - 0xAB,0xF5,0xAE,0x8C,0xDB,0x09,0x33,0xD7,0x1E,0x8C,0x94,0xE0, - 0x4A,0x25,0x61,0x9D,0xCE,0xE3,0xD2,0x26,0x1A,0xD2,0xEE,0x6B, - 0xF1,0x2F,0xFA,0x06,0xD9,0x8A,0x08,0x64,0xD8,0x76,0x02,0x73, - 0x3E,0xC8,0x6A,0x64,0x52,0x1F,0x2B,0x18,0x17,0x7B,0x20,0x0C, - 0xBB,0xE1,0x17,0x57,0x7A,0x61,0x5D,0x6C,0x77,0x09,0x88,0xC0, - 0xBA,0xD9,0x46,0xE2,0x08,0xE2,0x4F,0xA0,0x74,0xE5,0xAB,0x31, - 0x43,0xDB,0x5B,0xFC,0xE0,0xFD,0x10,0x8E,0x4B,0x82,0xD1,0x20, - 0xA9,0x21,0x08,0x01,0x1A,0x72,0x3C,0x12,0xA7,0x87,0xE6,0xD7, - 0x88,0x71,0x9A,0x10,0xBD,0xBA,0x5B,0x26,0x99,0xC3,0x27,0x18, - 0x6A,0xF4,0xE2,0x3C,0x1A,0x94,0x68,0x34,0xB6,0x15,0x0B,0xDA, - 0x25,0x83,0xE9,0xCA,0x2A,0xD4,0x4C,0xE8,0xDB,0xBB,0xC2,0xDB, - 0x04,0xDE,0x8E,0xF9,0x2E,0x8E,0xFC,0x14,0x1F,0xBE,0xCA,0xA6, - 0x28,0x7C,0x59,0x47,0x4E,0x6B,0xC0,0x5D,0x99,0xB2,0x96,0x4F, - 0xA0,0x90,0xC3,0xA2,0x23,0x3B,0xA1,0x86,0x51,0x5B,0xE7,0xED, - 0x1F,0x61,0x29,0x70,0xCE,0xE2,0xD7,0xAF,0xB8,0x1B,0xDD,0x76, - 0x21,0x70,0x48,0x1C,0xD0,0x06,0x91,0x27,0xD5,0xB0,0x5A,0xA9, - 0x93,0xB4,0xEA,0x98,0x8D,0x8F,0xDD,0xC1,0x86,0xFF,0xB7,0xDC, - 0x90,0xA6,0xC0,0x8F,0x4D,0xF4,0x35,0xC9,0x34,0x06,0x31,0x99, - 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, - }; - return BN_bin2bn(RFC3526_PRIME_4096,sizeof(RFC3526_PRIME_4096),bn); - } - -/* "6144-bit MODP Group" from RFC3526, Section 6. - * - * The prime is: 2^6144 - 2^6080 - 1 + 2^64 * { [2^6014 pi] + 929484 } - * - * RFC3526 specifies a generator of 2. - */ - -BIGNUM *get_rfc3526_prime_6144(BIGNUM *bn) - { - static const unsigned char RFC3526_PRIME_6144[]={ - 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2, - 0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1, - 0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6, - 0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD, - 0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D, - 0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45, - 0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9, - 0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED, - 0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11, - 0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D, - 0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36, - 0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F, - 0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56, - 0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D, - 0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08, - 0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B, - 0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2, - 0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9, - 0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C, - 0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10, - 0x15,0x72,0x8E,0x5A,0x8A,0xAA,0xC4,0x2D,0xAD,0x33,0x17,0x0D, - 0x04,0x50,0x7A,0x33,0xA8,0x55,0x21,0xAB,0xDF,0x1C,0xBA,0x64, - 0xEC,0xFB,0x85,0x04,0x58,0xDB,0xEF,0x0A,0x8A,0xEA,0x71,0x57, - 0x5D,0x06,0x0C,0x7D,0xB3,0x97,0x0F,0x85,0xA6,0xE1,0xE4,0xC7, - 0xAB,0xF5,0xAE,0x8C,0xDB,0x09,0x33,0xD7,0x1E,0x8C,0x94,0xE0, - 0x4A,0x25,0x61,0x9D,0xCE,0xE3,0xD2,0x26,0x1A,0xD2,0xEE,0x6B, - 0xF1,0x2F,0xFA,0x06,0xD9,0x8A,0x08,0x64,0xD8,0x76,0x02,0x73, - 0x3E,0xC8,0x6A,0x64,0x52,0x1F,0x2B,0x18,0x17,0x7B,0x20,0x0C, - 0xBB,0xE1,0x17,0x57,0x7A,0x61,0x5D,0x6C,0x77,0x09,0x88,0xC0, - 0xBA,0xD9,0x46,0xE2,0x08,0xE2,0x4F,0xA0,0x74,0xE5,0xAB,0x31, - 0x43,0xDB,0x5B,0xFC,0xE0,0xFD,0x10,0x8E,0x4B,0x82,0xD1,0x20, - 0xA9,0x21,0x08,0x01,0x1A,0x72,0x3C,0x12,0xA7,0x87,0xE6,0xD7, - 0x88,0x71,0x9A,0x10,0xBD,0xBA,0x5B,0x26,0x99,0xC3,0x27,0x18, - 0x6A,0xF4,0xE2,0x3C,0x1A,0x94,0x68,0x34,0xB6,0x15,0x0B,0xDA, - 0x25,0x83,0xE9,0xCA,0x2A,0xD4,0x4C,0xE8,0xDB,0xBB,0xC2,0xDB, - 0x04,0xDE,0x8E,0xF9,0x2E,0x8E,0xFC,0x14,0x1F,0xBE,0xCA,0xA6, - 0x28,0x7C,0x59,0x47,0x4E,0x6B,0xC0,0x5D,0x99,0xB2,0x96,0x4F, - 0xA0,0x90,0xC3,0xA2,0x23,0x3B,0xA1,0x86,0x51,0x5B,0xE7,0xED, - 0x1F,0x61,0x29,0x70,0xCE,0xE2,0xD7,0xAF,0xB8,0x1B,0xDD,0x76, - 0x21,0x70,0x48,0x1C,0xD0,0x06,0x91,0x27,0xD5,0xB0,0x5A,0xA9, - 0x93,0xB4,0xEA,0x98,0x8D,0x8F,0xDD,0xC1,0x86,0xFF,0xB7,0xDC, - 0x90,0xA6,0xC0,0x8F,0x4D,0xF4,0x35,0xC9,0x34,0x02,0x84,0x92, - 0x36,0xC3,0xFA,0xB4,0xD2,0x7C,0x70,0x26,0xC1,0xD4,0xDC,0xB2, - 0x60,0x26,0x46,0xDE,0xC9,0x75,0x1E,0x76,0x3D,0xBA,0x37,0xBD, - 0xF8,0xFF,0x94,0x06,0xAD,0x9E,0x53,0x0E,0xE5,0xDB,0x38,0x2F, - 0x41,0x30,0x01,0xAE,0xB0,0x6A,0x53,0xED,0x90,0x27,0xD8,0x31, - 0x17,0x97,0x27,0xB0,0x86,0x5A,0x89,0x18,0xDA,0x3E,0xDB,0xEB, - 0xCF,0x9B,0x14,0xED,0x44,0xCE,0x6C,0xBA,0xCE,0xD4,0xBB,0x1B, - 0xDB,0x7F,0x14,0x47,0xE6,0xCC,0x25,0x4B,0x33,0x20,0x51,0x51, - 0x2B,0xD7,0xAF,0x42,0x6F,0xB8,0xF4,0x01,0x37,0x8C,0xD2,0xBF, - 0x59,0x83,0xCA,0x01,0xC6,0x4B,0x92,0xEC,0xF0,0x32,0xEA,0x15, - 0xD1,0x72,0x1D,0x03,0xF4,0x82,0xD7,0xCE,0x6E,0x74,0xFE,0xF6, - 0xD5,0x5E,0x70,0x2F,0x46,0x98,0x0C,0x82,0xB5,0xA8,0x40,0x31, - 0x90,0x0B,0x1C,0x9E,0x59,0xE7,0xC9,0x7F,0xBE,0xC7,0xE8,0xF3, - 0x23,0xA9,0x7A,0x7E,0x36,0xCC,0x88,0xBE,0x0F,0x1D,0x45,0xB7, - 0xFF,0x58,0x5A,0xC5,0x4B,0xD4,0x07,0xB2,0x2B,0x41,0x54,0xAA, - 0xCC,0x8F,0x6D,0x7E,0xBF,0x48,0xE1,0xD8,0x14,0xCC,0x5E,0xD2, - 0x0F,0x80,0x37,0xE0,0xA7,0x97,0x15,0xEE,0xF2,0x9B,0xE3,0x28, - 0x06,0xA1,0xD5,0x8B,0xB7,0xC5,0xDA,0x76,0xF5,0x50,0xAA,0x3D, - 0x8A,0x1F,0xBF,0xF0,0xEB,0x19,0xCC,0xB1,0xA3,0x13,0xD5,0x5C, - 0xDA,0x56,0xC9,0xEC,0x2E,0xF2,0x96,0x32,0x38,0x7F,0xE8,0xD7, - 0x6E,0x3C,0x04,0x68,0x04,0x3E,0x8F,0x66,0x3F,0x48,0x60,0xEE, - 0x12,0xBF,0x2D,0x5B,0x0B,0x74,0x74,0xD6,0xE6,0x94,0xF9,0x1E, - 0x6D,0xCC,0x40,0x24,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, - }; - return BN_bin2bn(RFC3526_PRIME_6144,sizeof(RFC3526_PRIME_6144),bn); - } - -/* "8192-bit MODP Group" from RFC3526, Section 7. - * - * The prime is: 2^8192 - 2^8128 - 1 + 2^64 * { [2^8062 pi] + 4743158 } - * - * RFC3526 specifies a generator of 2. - */ - -BIGNUM *get_rfc3526_prime_8192(BIGNUM *bn) - { - static const unsigned char RFC3526_PRIME_8192[]={ - 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2, - 0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1, - 0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6, - 0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD, - 0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D, - 0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45, - 0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9, - 0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED, - 0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11, - 0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D, - 0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36, - 0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F, - 0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56, - 0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D, - 0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08, - 0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B, - 0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2, - 0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9, - 0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C, - 0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10, - 0x15,0x72,0x8E,0x5A,0x8A,0xAA,0xC4,0x2D,0xAD,0x33,0x17,0x0D, - 0x04,0x50,0x7A,0x33,0xA8,0x55,0x21,0xAB,0xDF,0x1C,0xBA,0x64, - 0xEC,0xFB,0x85,0x04,0x58,0xDB,0xEF,0x0A,0x8A,0xEA,0x71,0x57, - 0x5D,0x06,0x0C,0x7D,0xB3,0x97,0x0F,0x85,0xA6,0xE1,0xE4,0xC7, - 0xAB,0xF5,0xAE,0x8C,0xDB,0x09,0x33,0xD7,0x1E,0x8C,0x94,0xE0, - 0x4A,0x25,0x61,0x9D,0xCE,0xE3,0xD2,0x26,0x1A,0xD2,0xEE,0x6B, - 0xF1,0x2F,0xFA,0x06,0xD9,0x8A,0x08,0x64,0xD8,0x76,0x02,0x73, - 0x3E,0xC8,0x6A,0x64,0x52,0x1F,0x2B,0x18,0x17,0x7B,0x20,0x0C, - 0xBB,0xE1,0x17,0x57,0x7A,0x61,0x5D,0x6C,0x77,0x09,0x88,0xC0, - 0xBA,0xD9,0x46,0xE2,0x08,0xE2,0x4F,0xA0,0x74,0xE5,0xAB,0x31, - 0x43,0xDB,0x5B,0xFC,0xE0,0xFD,0x10,0x8E,0x4B,0x82,0xD1,0x20, - 0xA9,0x21,0x08,0x01,0x1A,0x72,0x3C,0x12,0xA7,0x87,0xE6,0xD7, - 0x88,0x71,0x9A,0x10,0xBD,0xBA,0x5B,0x26,0x99,0xC3,0x27,0x18, - 0x6A,0xF4,0xE2,0x3C,0x1A,0x94,0x68,0x34,0xB6,0x15,0x0B,0xDA, - 0x25,0x83,0xE9,0xCA,0x2A,0xD4,0x4C,0xE8,0xDB,0xBB,0xC2,0xDB, - 0x04,0xDE,0x8E,0xF9,0x2E,0x8E,0xFC,0x14,0x1F,0xBE,0xCA,0xA6, - 0x28,0x7C,0x59,0x47,0x4E,0x6B,0xC0,0x5D,0x99,0xB2,0x96,0x4F, - 0xA0,0x90,0xC3,0xA2,0x23,0x3B,0xA1,0x86,0x51,0x5B,0xE7,0xED, - 0x1F,0x61,0x29,0x70,0xCE,0xE2,0xD7,0xAF,0xB8,0x1B,0xDD,0x76, - 0x21,0x70,0x48,0x1C,0xD0,0x06,0x91,0x27,0xD5,0xB0,0x5A,0xA9, - 0x93,0xB4,0xEA,0x98,0x8D,0x8F,0xDD,0xC1,0x86,0xFF,0xB7,0xDC, - 0x90,0xA6,0xC0,0x8F,0x4D,0xF4,0x35,0xC9,0x34,0x02,0x84,0x92, - 0x36,0xC3,0xFA,0xB4,0xD2,0x7C,0x70,0x26,0xC1,0xD4,0xDC,0xB2, - 0x60,0x26,0x46,0xDE,0xC9,0x75,0x1E,0x76,0x3D,0xBA,0x37,0xBD, - 0xF8,0xFF,0x94,0x06,0xAD,0x9E,0x53,0x0E,0xE5,0xDB,0x38,0x2F, - 0x41,0x30,0x01,0xAE,0xB0,0x6A,0x53,0xED,0x90,0x27,0xD8,0x31, - 0x17,0x97,0x27,0xB0,0x86,0x5A,0x89,0x18,0xDA,0x3E,0xDB,0xEB, - 0xCF,0x9B,0x14,0xED,0x44,0xCE,0x6C,0xBA,0xCE,0xD4,0xBB,0x1B, - 0xDB,0x7F,0x14,0x47,0xE6,0xCC,0x25,0x4B,0x33,0x20,0x51,0x51, - 0x2B,0xD7,0xAF,0x42,0x6F,0xB8,0xF4,0x01,0x37,0x8C,0xD2,0xBF, - 0x59,0x83,0xCA,0x01,0xC6,0x4B,0x92,0xEC,0xF0,0x32,0xEA,0x15, - 0xD1,0x72,0x1D,0x03,0xF4,0x82,0xD7,0xCE,0x6E,0x74,0xFE,0xF6, - 0xD5,0x5E,0x70,0x2F,0x46,0x98,0x0C,0x82,0xB5,0xA8,0x40,0x31, - 0x90,0x0B,0x1C,0x9E,0x59,0xE7,0xC9,0x7F,0xBE,0xC7,0xE8,0xF3, - 0x23,0xA9,0x7A,0x7E,0x36,0xCC,0x88,0xBE,0x0F,0x1D,0x45,0xB7, - 0xFF,0x58,0x5A,0xC5,0x4B,0xD4,0x07,0xB2,0x2B,0x41,0x54,0xAA, - 0xCC,0x8F,0x6D,0x7E,0xBF,0x48,0xE1,0xD8,0x14,0xCC,0x5E,0xD2, - 0x0F,0x80,0x37,0xE0,0xA7,0x97,0x15,0xEE,0xF2,0x9B,0xE3,0x28, - 0x06,0xA1,0xD5,0x8B,0xB7,0xC5,0xDA,0x76,0xF5,0x50,0xAA,0x3D, - 0x8A,0x1F,0xBF,0xF0,0xEB,0x19,0xCC,0xB1,0xA3,0x13,0xD5,0x5C, - 0xDA,0x56,0xC9,0xEC,0x2E,0xF2,0x96,0x32,0x38,0x7F,0xE8,0xD7, - 0x6E,0x3C,0x04,0x68,0x04,0x3E,0x8F,0x66,0x3F,0x48,0x60,0xEE, - 0x12,0xBF,0x2D,0x5B,0x0B,0x74,0x74,0xD6,0xE6,0x94,0xF9,0x1E, - 0x6D,0xBE,0x11,0x59,0x74,0xA3,0x92,0x6F,0x12,0xFE,0xE5,0xE4, - 0x38,0x77,0x7C,0xB6,0xA9,0x32,0xDF,0x8C,0xD8,0xBE,0xC4,0xD0, - 0x73,0xB9,0x31,0xBA,0x3B,0xC8,0x32,0xB6,0x8D,0x9D,0xD3,0x00, - 0x74,0x1F,0xA7,0xBF,0x8A,0xFC,0x47,0xED,0x25,0x76,0xF6,0x93, - 0x6B,0xA4,0x24,0x66,0x3A,0xAB,0x63,0x9C,0x5A,0xE4,0xF5,0x68, - 0x34,0x23,0xB4,0x74,0x2B,0xF1,0xC9,0x78,0x23,0x8F,0x16,0xCB, - 0xE3,0x9D,0x65,0x2D,0xE3,0xFD,0xB8,0xBE,0xFC,0x84,0x8A,0xD9, - 0x22,0x22,0x2E,0x04,0xA4,0x03,0x7C,0x07,0x13,0xEB,0x57,0xA8, - 0x1A,0x23,0xF0,0xC7,0x34,0x73,0xFC,0x64,0x6C,0xEA,0x30,0x6B, - 0x4B,0xCB,0xC8,0x86,0x2F,0x83,0x85,0xDD,0xFA,0x9D,0x4B,0x7F, - 0xA2,0xC0,0x87,0xE8,0x79,0x68,0x33,0x03,0xED,0x5B,0xDD,0x3A, - 0x06,0x2B,0x3C,0xF5,0xB3,0xA2,0x78,0xA6,0x6D,0x2A,0x13,0xF8, - 0x3F,0x44,0xF8,0x2D,0xDF,0x31,0x0E,0xE0,0x74,0xAB,0x6A,0x36, - 0x45,0x97,0xE8,0x99,0xA0,0x25,0x5D,0xC1,0x64,0xF3,0x1C,0xC5, - 0x08,0x46,0x85,0x1D,0xF9,0xAB,0x48,0x19,0x5D,0xED,0x7E,0xA1, - 0xB1,0xD5,0x10,0xBD,0x7E,0xE7,0x4D,0x73,0xFA,0xF3,0x6B,0xC3, - 0x1E,0xCF,0xA2,0x68,0x35,0x90,0x46,0xF4,0xEB,0x87,0x9F,0x92, - 0x40,0x09,0x43,0x8B,0x48,0x1C,0x6C,0xD7,0x88,0x9A,0x00,0x2E, - 0xD5,0xEE,0x38,0x2B,0xC9,0x19,0x0D,0xA6,0xFC,0x02,0x6E,0x47, - 0x95,0x58,0xE4,0x47,0x56,0x77,0xE9,0xAA,0x9E,0x30,0x50,0xE2, - 0x76,0x56,0x94,0xDF,0xC8,0x1F,0x56,0xE8,0x80,0xB9,0x6E,0x71, - 0x60,0xC9,0x80,0xDD,0x98,0xED,0xD3,0xDF,0xFF,0xFF,0xFF,0xFF, - 0xFF,0xFF,0xFF,0xFF, - }; - return BN_bin2bn(RFC3526_PRIME_8192,sizeof(RFC3526_PRIME_8192),bn); - } - diff --git a/app/openssl/crypto/bn/bn_ctx.c b/app/openssl/crypto/bn/bn_ctx.c deleted file mode 100644 index 3f2256f6..00000000 --- a/app/openssl/crypto/bn/bn_ctx.c +++ /dev/null @@ -1,454 +0,0 @@ -/* crypto/bn/bn_ctx.c */ -/* Written by Ulf Moeller for the OpenSSL project. */ -/* ==================================================================== - * Copyright (c) 1998-2004 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -#if !defined(BN_CTX_DEBUG) && !defined(BN_DEBUG) -#ifndef NDEBUG -#define NDEBUG -#endif -#endif - -#include <stdio.h> -#include <assert.h> - -#include "cryptlib.h" -#include "bn_lcl.h" - -/* TODO list - * - * 1. Check a bunch of "(words+1)" type hacks in various bignum functions and - * check they can be safely removed. - * - Check +1 and other ugliness in BN_from_montgomery() - * - * 2. Consider allowing a BN_new_ex() that, at least, lets you specify an - * appropriate 'block' size that will be honoured by bn_expand_internal() to - * prevent piddly little reallocations. OTOH, profiling bignum expansions in - * BN_CTX doesn't show this to be a big issue. - */ - -/* How many bignums are in each "pool item"; */ -#define BN_CTX_POOL_SIZE 16 -/* The stack frame info is resizing, set a first-time expansion size; */ -#define BN_CTX_START_FRAMES 32 - -/***********/ -/* BN_POOL */ -/***********/ - -/* A bundle of bignums that can be linked with other bundles */ -typedef struct bignum_pool_item - { - /* The bignum values */ - BIGNUM vals[BN_CTX_POOL_SIZE]; - /* Linked-list admin */ - struct bignum_pool_item *prev, *next; - } BN_POOL_ITEM; -/* A linked-list of bignums grouped in bundles */ -typedef struct bignum_pool - { - /* Linked-list admin */ - BN_POOL_ITEM *head, *current, *tail; - /* Stack depth and allocation size */ - unsigned used, size; - } BN_POOL; -static void BN_POOL_init(BN_POOL *); -static void BN_POOL_finish(BN_POOL *); -#ifndef OPENSSL_NO_DEPRECATED -static void BN_POOL_reset(BN_POOL *); -#endif -static BIGNUM * BN_POOL_get(BN_POOL *); -static void BN_POOL_release(BN_POOL *, unsigned int); - -/************/ -/* BN_STACK */ -/************/ - -/* A wrapper to manage the "stack frames" */ -typedef struct bignum_ctx_stack - { - /* Array of indexes into the bignum stack */ - unsigned int *indexes; - /* Number of stack frames, and the size of the allocated array */ - unsigned int depth, size; - } BN_STACK; -static void BN_STACK_init(BN_STACK *); -static void BN_STACK_finish(BN_STACK *); -#ifndef OPENSSL_NO_DEPRECATED -static void BN_STACK_reset(BN_STACK *); -#endif -static int BN_STACK_push(BN_STACK *, unsigned int); -static unsigned int BN_STACK_pop(BN_STACK *); - -/**********/ -/* BN_CTX */ -/**********/ - -/* The opaque BN_CTX type */ -struct bignum_ctx - { - /* The bignum bundles */ - BN_POOL pool; - /* The "stack frames", if you will */ - BN_STACK stack; - /* The number of bignums currently assigned */ - unsigned int used; - /* Depth of stack overflow */ - int err_stack; - /* Block "gets" until an "end" (compatibility behaviour) */ - int too_many; - }; - -/* Enable this to find BN_CTX bugs */ -#ifdef BN_CTX_DEBUG -static const char *ctxdbg_cur = NULL; -static void ctxdbg(BN_CTX *ctx) - { - unsigned int bnidx = 0, fpidx = 0; - BN_POOL_ITEM *item = ctx->pool.head; - BN_STACK *stack = &ctx->stack; - fprintf(stderr,"(%08x): ", (unsigned int)ctx); - while(bnidx < ctx->used) - { - fprintf(stderr,"%03x ", item->vals[bnidx++ % BN_CTX_POOL_SIZE].dmax); - if(!(bnidx % BN_CTX_POOL_SIZE)) - item = item->next; - } - fprintf(stderr,"\n"); - bnidx = 0; - fprintf(stderr," : "); - while(fpidx < stack->depth) - { - while(bnidx++ < stack->indexes[fpidx]) - fprintf(stderr," "); - fprintf(stderr,"^^^ "); - bnidx++; - fpidx++; - } - fprintf(stderr,"\n"); - } -#define CTXDBG_ENTRY(str, ctx) do { \ - ctxdbg_cur = (str); \ - fprintf(stderr,"Starting %s\n", ctxdbg_cur); \ - ctxdbg(ctx); \ - } while(0) -#define CTXDBG_EXIT(ctx) do { \ - fprintf(stderr,"Ending %s\n", ctxdbg_cur); \ - ctxdbg(ctx); \ - } while(0) -#define CTXDBG_RET(ctx,ret) -#else -#define CTXDBG_ENTRY(str, ctx) -#define CTXDBG_EXIT(ctx) -#define CTXDBG_RET(ctx,ret) -#endif - -/* This function is an evil legacy and should not be used. This implementation - * is WYSIWYG, though I've done my best. */ -#ifndef OPENSSL_NO_DEPRECATED -void BN_CTX_init(BN_CTX *ctx) - { - /* Assume the caller obtained the context via BN_CTX_new() and so is - * trying to reset it for use. Nothing else makes sense, least of all - * binary compatibility from a time when they could declare a static - * variable. */ - BN_POOL_reset(&ctx->pool); - BN_STACK_reset(&ctx->stack); - ctx->used = 0; - ctx->err_stack = 0; - ctx->too_many = 0; - } -#endif - -BN_CTX *BN_CTX_new(void) - { - BN_CTX *ret = OPENSSL_malloc(sizeof(BN_CTX)); - if(!ret) - { - BNerr(BN_F_BN_CTX_NEW,ERR_R_MALLOC_FAILURE); - return NULL; - } - /* Initialise the structure */ - BN_POOL_init(&ret->pool); - BN_STACK_init(&ret->stack); - ret->used = 0; - ret->err_stack = 0; - ret->too_many = 0; - return ret; - } - -void BN_CTX_free(BN_CTX *ctx) - { - if (ctx == NULL) - return; -#ifdef BN_CTX_DEBUG - { - BN_POOL_ITEM *pool = ctx->pool.head; - fprintf(stderr,"BN_CTX_free, stack-size=%d, pool-bignums=%d\n", - ctx->stack.size, ctx->pool.size); - fprintf(stderr,"dmaxs: "); - while(pool) { - unsigned loop = 0; - while(loop < BN_CTX_POOL_SIZE) - fprintf(stderr,"%02x ", pool->vals[loop++].dmax); - pool = pool->next; - } - fprintf(stderr,"\n"); - } -#endif - BN_STACK_finish(&ctx->stack); - BN_POOL_finish(&ctx->pool); - OPENSSL_free(ctx); - } - -void BN_CTX_start(BN_CTX *ctx) - { - CTXDBG_ENTRY("BN_CTX_start", ctx); - /* If we're already overflowing ... */ - if(ctx->err_stack || ctx->too_many) - ctx->err_stack++; - /* (Try to) get a new frame pointer */ - else if(!BN_STACK_push(&ctx->stack, ctx->used)) - { - BNerr(BN_F_BN_CTX_START,BN_R_TOO_MANY_TEMPORARY_VARIABLES); - ctx->err_stack++; - } - CTXDBG_EXIT(ctx); - } - -void BN_CTX_end(BN_CTX *ctx) - { - CTXDBG_ENTRY("BN_CTX_end", ctx); - if(ctx->err_stack) - ctx->err_stack--; - else - { - unsigned int fp = BN_STACK_pop(&ctx->stack); - /* Does this stack frame have anything to release? */ - if(fp < ctx->used) - BN_POOL_release(&ctx->pool, ctx->used - fp); - ctx->used = fp; - /* Unjam "too_many" in case "get" had failed */ - ctx->too_many = 0; - } - CTXDBG_EXIT(ctx); - } - -BIGNUM *BN_CTX_get(BN_CTX *ctx) - { - BIGNUM *ret; - CTXDBG_ENTRY("BN_CTX_get", ctx); - if(ctx->err_stack || ctx->too_many) return NULL; - if((ret = BN_POOL_get(&ctx->pool)) == NULL) - { - /* Setting too_many prevents repeated "get" attempts from - * cluttering the error stack. */ - ctx->too_many = 1; - BNerr(BN_F_BN_CTX_GET,BN_R_TOO_MANY_TEMPORARY_VARIABLES); - return NULL; - } - /* OK, make sure the returned bignum is "zero" */ - BN_zero(ret); - ctx->used++; - CTXDBG_RET(ctx, ret); - return ret; - } - -/************/ -/* BN_STACK */ -/************/ - -static void BN_STACK_init(BN_STACK *st) - { - st->indexes = NULL; - st->depth = st->size = 0; - } - -static void BN_STACK_finish(BN_STACK *st) - { - if(st->size) OPENSSL_free(st->indexes); - } - -#ifndef OPENSSL_NO_DEPRECATED -static void BN_STACK_reset(BN_STACK *st) - { - st->depth = 0; - } -#endif - -static int BN_STACK_push(BN_STACK *st, unsigned int idx) - { - if(st->depth == st->size) - /* Need to expand */ - { - unsigned int newsize = (st->size ? - (st->size * 3 / 2) : BN_CTX_START_FRAMES); - unsigned int *newitems = OPENSSL_malloc(newsize * - sizeof(unsigned int)); - if(!newitems) return 0; - if(st->depth) - memcpy(newitems, st->indexes, st->depth * - sizeof(unsigned int)); - if(st->size) OPENSSL_free(st->indexes); - st->indexes = newitems; - st->size = newsize; - } - st->indexes[(st->depth)++] = idx; - return 1; - } - -static unsigned int BN_STACK_pop(BN_STACK *st) - { - return st->indexes[--(st->depth)]; - } - -/***********/ -/* BN_POOL */ -/***********/ - -static void BN_POOL_init(BN_POOL *p) - { - p->head = p->current = p->tail = NULL; - p->used = p->size = 0; - } - -static void BN_POOL_finish(BN_POOL *p) - { - while(p->head) - { - unsigned int loop = 0; - BIGNUM *bn = p->head->vals; - while(loop++ < BN_CTX_POOL_SIZE) - { - if(bn->d) BN_clear_free(bn); - bn++; - } - p->current = p->head->next; - OPENSSL_free(p->head); - p->head = p->current; - } - } - -#ifndef OPENSSL_NO_DEPRECATED -static void BN_POOL_reset(BN_POOL *p) - { - BN_POOL_ITEM *item = p->head; - while(item) - { - unsigned int loop = 0; - BIGNUM *bn = item->vals; - while(loop++ < BN_CTX_POOL_SIZE) - { - if(bn->d) BN_clear(bn); - bn++; - } - item = item->next; - } - p->current = p->head; - p->used = 0; - } -#endif - -static BIGNUM *BN_POOL_get(BN_POOL *p) - { - if(p->used == p->size) - { - BIGNUM *bn; - unsigned int loop = 0; - BN_POOL_ITEM *item = OPENSSL_malloc(sizeof(BN_POOL_ITEM)); - if(!item) return NULL; - /* Initialise the structure */ - bn = item->vals; - while(loop++ < BN_CTX_POOL_SIZE) - BN_init(bn++); - item->prev = p->tail; - item->next = NULL; - /* Link it in */ - if(!p->head) - p->head = p->current = p->tail = item; - else - { - p->tail->next = item; - p->tail = item; - p->current = item; - } - p->size += BN_CTX_POOL_SIZE; - p->used++; - /* Return the first bignum from the new pool */ - return item->vals; - } - if(!p->used) - p->current = p->head; - else if((p->used % BN_CTX_POOL_SIZE) == 0) - p->current = p->current->next; - return p->current->vals + ((p->used++) % BN_CTX_POOL_SIZE); - } - -static void BN_POOL_release(BN_POOL *p, unsigned int num) - { - unsigned int offset = (p->used - 1) % BN_CTX_POOL_SIZE; - p->used -= num; - while(num--) - { - bn_check_top(p->current->vals + offset); - if(!offset) - { - offset = BN_CTX_POOL_SIZE - 1; - p->current = p->current->prev; - } - else - offset--; - } - } - diff --git a/app/openssl/crypto/bn/bn_depr.c b/app/openssl/crypto/bn/bn_depr.c deleted file mode 100644 index 27535e4f..00000000 --- a/app/openssl/crypto/bn/bn_depr.c +++ /dev/null @@ -1,112 +0,0 @@ -/* crypto/bn/bn_depr.c */ -/* ==================================================================== - * Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -/* Support for deprecated functions goes here - static linkage will only slurp - * this code if applications are using them directly. */ - -#include <stdio.h> -#include <time.h> -#include "cryptlib.h" -#include "bn_lcl.h" -#include <openssl/rand.h> - -static void *dummy=&dummy; - -#ifndef OPENSSL_NO_DEPRECATED -BIGNUM *BN_generate_prime(BIGNUM *ret, int bits, int safe, - const BIGNUM *add, const BIGNUM *rem, - void (*callback)(int,int,void *), void *cb_arg) - { - BN_GENCB cb; - BIGNUM *rnd=NULL; - int found = 0; - - BN_GENCB_set_old(&cb, callback, cb_arg); - - if (ret == NULL) - { - if ((rnd=BN_new()) == NULL) goto err; - } - else - rnd=ret; - if(!BN_generate_prime_ex(rnd, bits, safe, add, rem, &cb)) - goto err; - - /* we have a prime :-) */ - found = 1; -err: - if (!found && (ret == NULL) && (rnd != NULL)) BN_free(rnd); - return(found ? rnd : NULL); - } - -int BN_is_prime(const BIGNUM *a, int checks, void (*callback)(int,int,void *), - BN_CTX *ctx_passed, void *cb_arg) - { - BN_GENCB cb; - BN_GENCB_set_old(&cb, callback, cb_arg); - return BN_is_prime_ex(a, checks, ctx_passed, &cb); - } - -int BN_is_prime_fasttest(const BIGNUM *a, int checks, - void (*callback)(int,int,void *), - BN_CTX *ctx_passed, void *cb_arg, - int do_trial_division) - { - BN_GENCB cb; - BN_GENCB_set_old(&cb, callback, cb_arg); - return BN_is_prime_fasttest_ex(a, checks, ctx_passed, - do_trial_division, &cb); - } -#endif diff --git a/app/openssl/crypto/bn/bn_div.c b/app/openssl/crypto/bn/bn_div.c deleted file mode 100644 index 802a43d6..00000000 --- a/app/openssl/crypto/bn/bn_div.c +++ /dev/null @@ -1,650 +0,0 @@ -/* crypto/bn/bn_div.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include <openssl/bn.h> -#include "cryptlib.h" -#include "bn_lcl.h" - - -/* The old slow way */ -#if 0 -int BN_div(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m, const BIGNUM *d, - BN_CTX *ctx) - { - int i,nm,nd; - int ret = 0; - BIGNUM *D; - - bn_check_top(m); - bn_check_top(d); - if (BN_is_zero(d)) - { - BNerr(BN_F_BN_DIV,BN_R_DIV_BY_ZERO); - return(0); - } - - if (BN_ucmp(m,d) < 0) - { - if (rem != NULL) - { if (BN_copy(rem,m) == NULL) return(0); } - if (dv != NULL) BN_zero(dv); - return(1); - } - - BN_CTX_start(ctx); - D = BN_CTX_get(ctx); - if (dv == NULL) dv = BN_CTX_get(ctx); - if (rem == NULL) rem = BN_CTX_get(ctx); - if (D == NULL || dv == NULL || rem == NULL) - goto end; - - nd=BN_num_bits(d); - nm=BN_num_bits(m); - if (BN_copy(D,d) == NULL) goto end; - if (BN_copy(rem,m) == NULL) goto end; - - /* The next 2 are needed so we can do a dv->d[0]|=1 later - * since BN_lshift1 will only work once there is a value :-) */ - BN_zero(dv); - if(bn_wexpand(dv,1) == NULL) goto end; - dv->top=1; - - if (!BN_lshift(D,D,nm-nd)) goto end; - for (i=nm-nd; i>=0; i--) - { - if (!BN_lshift1(dv,dv)) goto end; - if (BN_ucmp(rem,D) >= 0) - { - dv->d[0]|=1; - if (!BN_usub(rem,rem,D)) goto end; - } -/* CAN IMPROVE (and have now :=) */ - if (!BN_rshift1(D,D)) goto end; - } - rem->neg=BN_is_zero(rem)?0:m->neg; - dv->neg=m->neg^d->neg; - ret = 1; - end: - BN_CTX_end(ctx); - return(ret); - } - -#else - -#if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) \ - && !defined(PEDANTIC) && !defined(BN_DIV3W) -# if defined(__GNUC__) && __GNUC__>=2 -# if defined(__i386) || defined (__i386__) - /* - * There were two reasons for implementing this template: - * - GNU C generates a call to a function (__udivdi3 to be exact) - * in reply to ((((BN_ULLONG)n0)<<BN_BITS2)|n1)/d0 (I fail to - * understand why...); - * - divl doesn't only calculate quotient, but also leaves - * remainder in %edx which we can definitely use here:-) - * - * <appro@fy.chalmers.se> - */ -# define bn_div_words(n0,n1,d0) \ - ({ asm volatile ( \ - "divl %4" \ - : "=a"(q), "=d"(rem) \ - : "a"(n1), "d"(n0), "g"(d0) \ - : "cc"); \ - q; \ - }) -# define REMAINDER_IS_ALREADY_CALCULATED -# elif defined(__x86_64) && defined(SIXTY_FOUR_BIT_LONG) - /* - * Same story here, but it's 128-bit by 64-bit division. Wow! - * <appro@fy.chalmers.se> - */ -# define bn_div_words(n0,n1,d0) \ - ({ asm volatile ( \ - "divq %4" \ - : "=a"(q), "=d"(rem) \ - : "a"(n1), "d"(n0), "g"(d0) \ - : "cc"); \ - q; \ - }) -# define REMAINDER_IS_ALREADY_CALCULATED -# endif /* __<cpu> */ -# endif /* __GNUC__ */ -#endif /* OPENSSL_NO_ASM */ - - -/* BN_div[_no_branch] computes dv := num / divisor, rounding towards - * zero, and sets up rm such that dv*divisor + rm = num holds. - * Thus: - * dv->neg == num->neg ^ divisor->neg (unless the result is zero) - * rm->neg == num->neg (unless the remainder is zero) - * If 'dv' or 'rm' is NULL, the respective value is not returned. - */ -static int BN_div_no_branch(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num, - const BIGNUM *divisor, BN_CTX *ctx); -int BN_div(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num, const BIGNUM *divisor, - BN_CTX *ctx) - { - int norm_shift,i,loop; - BIGNUM *tmp,wnum,*snum,*sdiv,*res; - BN_ULONG *resp,*wnump; - BN_ULONG d0,d1; - int num_n,div_n; - - /* Invalid zero-padding would have particularly bad consequences - * in the case of 'num', so don't just rely on bn_check_top() for this one - * (bn_check_top() works only for BN_DEBUG builds) */ - if (num->top > 0 && num->d[num->top - 1] == 0) - { - BNerr(BN_F_BN_DIV,BN_R_NOT_INITIALIZED); - return 0; - } - - bn_check_top(num); - - if ((BN_get_flags(num, BN_FLG_CONSTTIME) != 0) || (BN_get_flags(divisor, BN_FLG_CONSTTIME) != 0)) - { - return BN_div_no_branch(dv, rm, num, divisor, ctx); - } - - bn_check_top(dv); - bn_check_top(rm); - /* bn_check_top(num); */ /* 'num' has been checked already */ - bn_check_top(divisor); - - if (BN_is_zero(divisor)) - { - BNerr(BN_F_BN_DIV,BN_R_DIV_BY_ZERO); - return(0); - } - - if (BN_ucmp(num,divisor) < 0) - { - if (rm != NULL) - { if (BN_copy(rm,num) == NULL) return(0); } - if (dv != NULL) BN_zero(dv); - return(1); - } - - BN_CTX_start(ctx); - tmp=BN_CTX_get(ctx); - snum=BN_CTX_get(ctx); - sdiv=BN_CTX_get(ctx); - if (dv == NULL) - res=BN_CTX_get(ctx); - else res=dv; - if (sdiv == NULL || res == NULL || tmp == NULL || snum == NULL) - goto err; - - /* First we normalise the numbers */ - norm_shift=BN_BITS2-((BN_num_bits(divisor))%BN_BITS2); - if (!(BN_lshift(sdiv,divisor,norm_shift))) goto err; - sdiv->neg=0; - norm_shift+=BN_BITS2; - if (!(BN_lshift(snum,num,norm_shift))) goto err; - snum->neg=0; - div_n=sdiv->top; - num_n=snum->top; - loop=num_n-div_n; - /* Lets setup a 'window' into snum - * This is the part that corresponds to the current - * 'area' being divided */ - wnum.neg = 0; - wnum.d = &(snum->d[loop]); - wnum.top = div_n; - /* only needed when BN_ucmp messes up the values between top and max */ - wnum.dmax = snum->dmax - loop; /* so we don't step out of bounds */ - - /* Get the top 2 words of sdiv */ - /* div_n=sdiv->top; */ - d0=sdiv->d[div_n-1]; - d1=(div_n == 1)?0:sdiv->d[div_n-2]; - - /* pointer to the 'top' of snum */ - wnump= &(snum->d[num_n-1]); - - /* Setup to 'res' */ - res->neg= (num->neg^divisor->neg); - if (!bn_wexpand(res,(loop+1))) goto err; - res->top=loop; - resp= &(res->d[loop-1]); - - /* space for temp */ - if (!bn_wexpand(tmp,(div_n+1))) goto err; - - if (BN_ucmp(&wnum,sdiv) >= 0) - { - /* If BN_DEBUG_RAND is defined BN_ucmp changes (via - * bn_pollute) the const bignum arguments => - * clean the values between top and max again */ - bn_clear_top2max(&wnum); - bn_sub_words(wnum.d, wnum.d, sdiv->d, div_n); - *resp=1; - } - else - res->top--; - /* if res->top == 0 then clear the neg value otherwise decrease - * the resp pointer */ - if (res->top == 0) - res->neg = 0; - else - resp--; - - for (i=0; i<loop-1; i++, wnump--, resp--) - { - BN_ULONG q,l0; - /* the first part of the loop uses the top two words of - * snum and sdiv to calculate a BN_ULONG q such that - * | wnum - sdiv * q | < sdiv */ -#if defined(BN_DIV3W) && !defined(OPENSSL_NO_ASM) - BN_ULONG bn_div_3_words(BN_ULONG*,BN_ULONG,BN_ULONG); - q=bn_div_3_words(wnump,d1,d0); -#else - BN_ULONG n0,n1,rem=0; - - n0=wnump[0]; - n1=wnump[-1]; - if (n0 == d0) - q=BN_MASK2; - else /* n0 < d0 */ - { -#ifdef BN_LLONG - BN_ULLONG t2; - -#if defined(BN_LLONG) && defined(BN_DIV2W) && !defined(bn_div_words) - q=(BN_ULONG)(((((BN_ULLONG)n0)<<BN_BITS2)|n1)/d0); -#else - q=bn_div_words(n0,n1,d0); -#ifdef BN_DEBUG_LEVITTE - fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\ -X) -> 0x%08X\n", - n0, n1, d0, q); -#endif -#endif - -#ifndef REMAINDER_IS_ALREADY_CALCULATED - /* - * rem doesn't have to be BN_ULLONG. The least we - * know it's less that d0, isn't it? - */ - rem=(n1-q*d0)&BN_MASK2; -#endif - t2=(BN_ULLONG)d1*q; - - for (;;) - { - if (t2 <= ((((BN_ULLONG)rem)<<BN_BITS2)|wnump[-2])) - break; - q--; - rem += d0; - if (rem < d0) break; /* don't let rem overflow */ - t2 -= d1; - } -#else /* !BN_LLONG */ - BN_ULONG t2l,t2h; - - q=bn_div_words(n0,n1,d0); -#ifdef BN_DEBUG_LEVITTE - fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\ -X) -> 0x%08X\n", - n0, n1, d0, q); -#endif -#ifndef REMAINDER_IS_ALREADY_CALCULATED - rem=(n1-q*d0)&BN_MASK2; -#endif - -#if defined(BN_UMULT_LOHI) - BN_UMULT_LOHI(t2l,t2h,d1,q); -#elif defined(BN_UMULT_HIGH) - t2l = d1 * q; - t2h = BN_UMULT_HIGH(d1,q); -#else - { - BN_ULONG ql, qh; - t2l=LBITS(d1); t2h=HBITS(d1); - ql =LBITS(q); qh =HBITS(q); - mul64(t2l,t2h,ql,qh); /* t2=(BN_ULLONG)d1*q; */ - } -#endif - - for (;;) - { - if ((t2h < rem) || - ((t2h == rem) && (t2l <= wnump[-2]))) - break; - q--; - rem += d0; - if (rem < d0) break; /* don't let rem overflow */ - if (t2l < d1) t2h--; t2l -= d1; - } -#endif /* !BN_LLONG */ - } -#endif /* !BN_DIV3W */ - - l0=bn_mul_words(tmp->d,sdiv->d,div_n,q); - tmp->d[div_n]=l0; - wnum.d--; - /* ingore top values of the bignums just sub the two - * BN_ULONG arrays with bn_sub_words */ - if (bn_sub_words(wnum.d, wnum.d, tmp->d, div_n+1)) - { - /* Note: As we have considered only the leading - * two BN_ULONGs in the calculation of q, sdiv * q - * might be greater than wnum (but then (q-1) * sdiv - * is less or equal than wnum) - */ - q--; - if (bn_add_words(wnum.d, wnum.d, sdiv->d, div_n)) - /* we can't have an overflow here (assuming - * that q != 0, but if q == 0 then tmp is - * zero anyway) */ - (*wnump)++; - } - /* store part of the result */ - *resp = q; - } - bn_correct_top(snum); - if (rm != NULL) - { - /* Keep a copy of the neg flag in num because if rm==num - * BN_rshift() will overwrite it. - */ - int neg = num->neg; - BN_rshift(rm,snum,norm_shift); - if (!BN_is_zero(rm)) - rm->neg = neg; - bn_check_top(rm); - } - BN_CTX_end(ctx); - return(1); -err: - bn_check_top(rm); - BN_CTX_end(ctx); - return(0); - } - - -/* BN_div_no_branch is a special version of BN_div. It does not contain - * branches that may leak sensitive information. - */ -static int BN_div_no_branch(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num, - const BIGNUM *divisor, BN_CTX *ctx) - { - int norm_shift,i,loop; - BIGNUM *tmp,wnum,*snum,*sdiv,*res; - BN_ULONG *resp,*wnump; - BN_ULONG d0,d1; - int num_n,div_n; - - bn_check_top(dv); - bn_check_top(rm); - /* bn_check_top(num); */ /* 'num' has been checked in BN_div() */ - bn_check_top(divisor); - - if (BN_is_zero(divisor)) - { - BNerr(BN_F_BN_DIV_NO_BRANCH,BN_R_DIV_BY_ZERO); - return(0); - } - - BN_CTX_start(ctx); - tmp=BN_CTX_get(ctx); - snum=BN_CTX_get(ctx); - sdiv=BN_CTX_get(ctx); - if (dv == NULL) - res=BN_CTX_get(ctx); - else res=dv; - if (sdiv == NULL || res == NULL) goto err; - - /* First we normalise the numbers */ - norm_shift=BN_BITS2-((BN_num_bits(divisor))%BN_BITS2); - if (!(BN_lshift(sdiv,divisor,norm_shift))) goto err; - sdiv->neg=0; - norm_shift+=BN_BITS2; - if (!(BN_lshift(snum,num,norm_shift))) goto err; - snum->neg=0; - - /* Since we don't know whether snum is larger than sdiv, - * we pad snum with enough zeroes without changing its - * value. - */ - if (snum->top <= sdiv->top+1) - { - if (bn_wexpand(snum, sdiv->top + 2) == NULL) goto err; - for (i = snum->top; i < sdiv->top + 2; i++) snum->d[i] = 0; - snum->top = sdiv->top + 2; - } - else - { - if (bn_wexpand(snum, snum->top + 1) == NULL) goto err; - snum->d[snum->top] = 0; - snum->top ++; - } - - div_n=sdiv->top; - num_n=snum->top; - loop=num_n-div_n; - /* Lets setup a 'window' into snum - * This is the part that corresponds to the current - * 'area' being divided */ - wnum.neg = 0; - wnum.d = &(snum->d[loop]); - wnum.top = div_n; - /* only needed when BN_ucmp messes up the values between top and max */ - wnum.dmax = snum->dmax - loop; /* so we don't step out of bounds */ - - /* Get the top 2 words of sdiv */ - /* div_n=sdiv->top; */ - d0=sdiv->d[div_n-1]; - d1=(div_n == 1)?0:sdiv->d[div_n-2]; - - /* pointer to the 'top' of snum */ - wnump= &(snum->d[num_n-1]); - - /* Setup to 'res' */ - res->neg= (num->neg^divisor->neg); - if (!bn_wexpand(res,(loop+1))) goto err; - res->top=loop-1; - resp= &(res->d[loop-1]); - - /* space for temp */ - if (!bn_wexpand(tmp,(div_n+1))) goto err; - - /* if res->top == 0 then clear the neg value otherwise decrease - * the resp pointer */ - if (res->top == 0) - res->neg = 0; - else - resp--; - - for (i=0; i<loop-1; i++, wnump--, resp--) - { - BN_ULONG q,l0; - /* the first part of the loop uses the top two words of - * snum and sdiv to calculate a BN_ULONG q such that - * | wnum - sdiv * q | < sdiv */ -#if defined(BN_DIV3W) && !defined(OPENSSL_NO_ASM) - BN_ULONG bn_div_3_words(BN_ULONG*,BN_ULONG,BN_ULONG); - q=bn_div_3_words(wnump,d1,d0); -#else - BN_ULONG n0,n1,rem=0; - - n0=wnump[0]; - n1=wnump[-1]; - if (n0 == d0) - q=BN_MASK2; - else /* n0 < d0 */ - { -#ifdef BN_LLONG - BN_ULLONG t2; - -#if defined(BN_LLONG) && defined(BN_DIV2W) && !defined(bn_div_words) - q=(BN_ULONG)(((((BN_ULLONG)n0)<<BN_BITS2)|n1)/d0); -#else - q=bn_div_words(n0,n1,d0); -#ifdef BN_DEBUG_LEVITTE - fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\ -X) -> 0x%08X\n", - n0, n1, d0, q); -#endif -#endif - -#ifndef REMAINDER_IS_ALREADY_CALCULATED - /* - * rem doesn't have to be BN_ULLONG. The least we - * know it's less that d0, isn't it? - */ - rem=(n1-q*d0)&BN_MASK2; -#endif - t2=(BN_ULLONG)d1*q; - - for (;;) - { - if (t2 <= ((((BN_ULLONG)rem)<<BN_BITS2)|wnump[-2])) - break; - q--; - rem += d0; - if (rem < d0) break; /* don't let rem overflow */ - t2 -= d1; - } -#else /* !BN_LLONG */ - BN_ULONG t2l,t2h; - - q=bn_div_words(n0,n1,d0); -#ifdef BN_DEBUG_LEVITTE - fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\ -X) -> 0x%08X\n", - n0, n1, d0, q); -#endif -#ifndef REMAINDER_IS_ALREADY_CALCULATED - rem=(n1-q*d0)&BN_MASK2; -#endif - -#if defined(BN_UMULT_LOHI) - BN_UMULT_LOHI(t2l,t2h,d1,q); -#elif defined(BN_UMULT_HIGH) - t2l = d1 * q; - t2h = BN_UMULT_HIGH(d1,q); -#else - { - BN_ULONG ql, qh; - t2l=LBITS(d1); t2h=HBITS(d1); - ql =LBITS(q); qh =HBITS(q); - mul64(t2l,t2h,ql,qh); /* t2=(BN_ULLONG)d1*q; */ - } -#endif - - for (;;) - { - if ((t2h < rem) || - ((t2h == rem) && (t2l <= wnump[-2]))) - break; - q--; - rem += d0; - if (rem < d0) break; /* don't let rem overflow */ - if (t2l < d1) t2h--; t2l -= d1; - } -#endif /* !BN_LLONG */ - } -#endif /* !BN_DIV3W */ - - l0=bn_mul_words(tmp->d,sdiv->d,div_n,q); - tmp->d[div_n]=l0; - wnum.d--; - /* ingore top values of the bignums just sub the two - * BN_ULONG arrays with bn_sub_words */ - if (bn_sub_words(wnum.d, wnum.d, tmp->d, div_n+1)) - { - /* Note: As we have considered only the leading - * two BN_ULONGs in the calculation of q, sdiv * q - * might be greater than wnum (but then (q-1) * sdiv - * is less or equal than wnum) - */ - q--; - if (bn_add_words(wnum.d, wnum.d, sdiv->d, div_n)) - /* we can't have an overflow here (assuming - * that q != 0, but if q == 0 then tmp is - * zero anyway) */ - (*wnump)++; - } - /* store part of the result */ - *resp = q; - } - bn_correct_top(snum); - if (rm != NULL) - { - /* Keep a copy of the neg flag in num because if rm==num - * BN_rshift() will overwrite it. - */ - int neg = num->neg; - BN_rshift(rm,snum,norm_shift); - if (!BN_is_zero(rm)) - rm->neg = neg; - bn_check_top(rm); - } - bn_correct_top(res); - BN_CTX_end(ctx); - return(1); -err: - bn_check_top(rm); - BN_CTX_end(ctx); - return(0); - } - -#endif diff --git a/app/openssl/crypto/bn/bn_err.c b/app/openssl/crypto/bn/bn_err.c deleted file mode 100644 index cfe2eb94..00000000 --- a/app/openssl/crypto/bn/bn_err.c +++ /dev/null @@ -1,150 +0,0 @@ -/* crypto/bn/bn_err.c */ -/* ==================================================================== - * Copyright (c) 1999-2007 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@OpenSSL.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -/* NOTE: this file was auto generated by the mkerr.pl script: any changes - * made to it will be overwritten when the script next updates this file, - * only reason strings will be preserved. - */ - -#include <stdio.h> -#include <openssl/err.h> -#include <openssl/bn.h> - -/* BEGIN ERROR CODES */ -#ifndef OPENSSL_NO_ERR - -#define ERR_FUNC(func) ERR_PACK(ERR_LIB_BN,func,0) -#define ERR_REASON(reason) ERR_PACK(ERR_LIB_BN,0,reason) - -static ERR_STRING_DATA BN_str_functs[]= - { -{ERR_FUNC(BN_F_BNRAND), "BNRAND"}, -{ERR_FUNC(BN_F_BN_BLINDING_CONVERT_EX), "BN_BLINDING_convert_ex"}, -{ERR_FUNC(BN_F_BN_BLINDING_CREATE_PARAM), "BN_BLINDING_create_param"}, -{ERR_FUNC(BN_F_BN_BLINDING_INVERT_EX), "BN_BLINDING_invert_ex"}, -{ERR_FUNC(BN_F_BN_BLINDING_NEW), "BN_BLINDING_new"}, -{ERR_FUNC(BN_F_BN_BLINDING_UPDATE), "BN_BLINDING_update"}, -{ERR_FUNC(BN_F_BN_BN2DEC), "BN_bn2dec"}, -{ERR_FUNC(BN_F_BN_BN2HEX), "BN_bn2hex"}, -{ERR_FUNC(BN_F_BN_CTX_GET), "BN_CTX_get"}, -{ERR_FUNC(BN_F_BN_CTX_NEW), "BN_CTX_new"}, -{ERR_FUNC(BN_F_BN_CTX_START), "BN_CTX_start"}, -{ERR_FUNC(BN_F_BN_DIV), "BN_div"}, -{ERR_FUNC(BN_F_BN_DIV_NO_BRANCH), "BN_div_no_branch"}, -{ERR_FUNC(BN_F_BN_DIV_RECP), "BN_div_recp"}, -{ERR_FUNC(BN_F_BN_EXP), "BN_exp"}, -{ERR_FUNC(BN_F_BN_EXPAND2), "bn_expand2"}, -{ERR_FUNC(BN_F_BN_EXPAND_INTERNAL), "BN_EXPAND_INTERNAL"}, -{ERR_FUNC(BN_F_BN_GF2M_MOD), "BN_GF2m_mod"}, -{ERR_FUNC(BN_F_BN_GF2M_MOD_EXP), "BN_GF2m_mod_exp"}, -{ERR_FUNC(BN_F_BN_GF2M_MOD_MUL), "BN_GF2m_mod_mul"}, -{ERR_FUNC(BN_F_BN_GF2M_MOD_SOLVE_QUAD), "BN_GF2m_mod_solve_quad"}, -{ERR_FUNC(BN_F_BN_GF2M_MOD_SOLVE_QUAD_ARR), "BN_GF2m_mod_solve_quad_arr"}, -{ERR_FUNC(BN_F_BN_GF2M_MOD_SQR), "BN_GF2m_mod_sqr"}, -{ERR_FUNC(BN_F_BN_GF2M_MOD_SQRT), "BN_GF2m_mod_sqrt"}, -{ERR_FUNC(BN_F_BN_MOD_EXP2_MONT), "BN_mod_exp2_mont"}, -{ERR_FUNC(BN_F_BN_MOD_EXP_MONT), "BN_mod_exp_mont"}, -{ERR_FUNC(BN_F_BN_MOD_EXP_MONT_CONSTTIME), "BN_mod_exp_mont_consttime"}, -{ERR_FUNC(BN_F_BN_MOD_EXP_MONT_WORD), "BN_mod_exp_mont_word"}, -{ERR_FUNC(BN_F_BN_MOD_EXP_RECP), "BN_mod_exp_recp"}, -{ERR_FUNC(BN_F_BN_MOD_EXP_SIMPLE), "BN_mod_exp_simple"}, -{ERR_FUNC(BN_F_BN_MOD_INVERSE), "BN_mod_inverse"}, -{ERR_FUNC(BN_F_BN_MOD_INVERSE_NO_BRANCH), "BN_mod_inverse_no_branch"}, -{ERR_FUNC(BN_F_BN_MOD_LSHIFT_QUICK), "BN_mod_lshift_quick"}, -{ERR_FUNC(BN_F_BN_MOD_MUL_RECIPROCAL), "BN_mod_mul_reciprocal"}, -{ERR_FUNC(BN_F_BN_MOD_SQRT), "BN_mod_sqrt"}, -{ERR_FUNC(BN_F_BN_MPI2BN), "BN_mpi2bn"}, -{ERR_FUNC(BN_F_BN_NEW), "BN_new"}, -{ERR_FUNC(BN_F_BN_RAND), "BN_rand"}, -{ERR_FUNC(BN_F_BN_RAND_RANGE), "BN_rand_range"}, -{ERR_FUNC(BN_F_BN_USUB), "BN_usub"}, -{0,NULL} - }; - -static ERR_STRING_DATA BN_str_reasons[]= - { -{ERR_REASON(BN_R_ARG2_LT_ARG3) ,"arg2 lt arg3"}, -{ERR_REASON(BN_R_BAD_RECIPROCAL) ,"bad reciprocal"}, -{ERR_REASON(BN_R_BIGNUM_TOO_LONG) ,"bignum too long"}, -{ERR_REASON(BN_R_CALLED_WITH_EVEN_MODULUS),"called with even modulus"}, -{ERR_REASON(BN_R_DIV_BY_ZERO) ,"div by zero"}, -{ERR_REASON(BN_R_ENCODING_ERROR) ,"encoding error"}, -{ERR_REASON(BN_R_EXPAND_ON_STATIC_BIGNUM_DATA),"expand on static bignum data"}, -{ERR_REASON(BN_R_INPUT_NOT_REDUCED) ,"input not reduced"}, -{ERR_REASON(BN_R_INVALID_LENGTH) ,"invalid length"}, -{ERR_REASON(BN_R_INVALID_RANGE) ,"invalid range"}, -{ERR_REASON(BN_R_NOT_A_SQUARE) ,"not a square"}, -{ERR_REASON(BN_R_NOT_INITIALIZED) ,"not initialized"}, -{ERR_REASON(BN_R_NO_INVERSE) ,"no inverse"}, -{ERR_REASON(BN_R_NO_SOLUTION) ,"no solution"}, -{ERR_REASON(BN_R_P_IS_NOT_PRIME) ,"p is not prime"}, -{ERR_REASON(BN_R_TOO_MANY_ITERATIONS) ,"too many iterations"}, -{ERR_REASON(BN_R_TOO_MANY_TEMPORARY_VARIABLES),"too many temporary variables"}, -{0,NULL} - }; - -#endif - -void ERR_load_BN_strings(void) - { -#ifndef OPENSSL_NO_ERR - - if (ERR_func_error_string(BN_str_functs[0].error) == NULL) - { - ERR_load_strings(0,BN_str_functs); - ERR_load_strings(0,BN_str_reasons); - } -#endif - } diff --git a/app/openssl/crypto/bn/bn_exp.c b/app/openssl/crypto/bn/bn_exp.c deleted file mode 100644 index d9b6c737..00000000 --- a/app/openssl/crypto/bn/bn_exp.c +++ /dev/null @@ -1,991 +0,0 @@ -/* crypto/bn/bn_exp.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ -/* ==================================================================== - * Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - - -#include "cryptlib.h" -#include "bn_lcl.h" - -/* maximum precomputation table size for *variable* sliding windows */ -#define TABLE_SIZE 32 - -/* this one works - simple but works */ -int BN_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx) - { - int i,bits,ret=0; - BIGNUM *v,*rr; - - if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0) - { - /* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */ - BNerr(BN_F_BN_EXP,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); - return -1; - } - - BN_CTX_start(ctx); - if ((r == a) || (r == p)) - rr = BN_CTX_get(ctx); - else - rr = r; - v = BN_CTX_get(ctx); - if (rr == NULL || v == NULL) goto err; - - if (BN_copy(v,a) == NULL) goto err; - bits=BN_num_bits(p); - - if (BN_is_odd(p)) - { if (BN_copy(rr,a) == NULL) goto err; } - else { if (!BN_one(rr)) goto err; } - - for (i=1; i<bits; i++) - { - if (!BN_sqr(v,v,ctx)) goto err; - if (BN_is_bit_set(p,i)) - { - if (!BN_mul(rr,rr,v,ctx)) goto err; - } - } - ret=1; -err: - if (r != rr) BN_copy(r,rr); - BN_CTX_end(ctx); - bn_check_top(r); - return(ret); - } - - -int BN_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, const BIGNUM *m, - BN_CTX *ctx) - { - int ret; - - bn_check_top(a); - bn_check_top(p); - bn_check_top(m); - - /* For even modulus m = 2^k*m_odd, it might make sense to compute - * a^p mod m_odd and a^p mod 2^k separately (with Montgomery - * exponentiation for the odd part), using appropriate exponent - * reductions, and combine the results using the CRT. - * - * For now, we use Montgomery only if the modulus is odd; otherwise, - * exponentiation using the reciprocal-based quick remaindering - * algorithm is used. - * - * (Timing obtained with expspeed.c [computations a^p mod m - * where a, p, m are of the same length: 256, 512, 1024, 2048, - * 4096, 8192 bits], compared to the running time of the - * standard algorithm: - * - * BN_mod_exp_mont 33 .. 40 % [AMD K6-2, Linux, debug configuration] - * 55 .. 77 % [UltraSparc processor, but - * debug-solaris-sparcv8-gcc conf.] - * - * BN_mod_exp_recp 50 .. 70 % [AMD K6-2, Linux, debug configuration] - * 62 .. 118 % [UltraSparc, debug-solaris-sparcv8-gcc] - * - * On the Sparc, BN_mod_exp_recp was faster than BN_mod_exp_mont - * at 2048 and more bits, but at 512 and 1024 bits, it was - * slower even than the standard algorithm! - * - * "Real" timings [linux-elf, solaris-sparcv9-gcc configurations] - * should be obtained when the new Montgomery reduction code - * has been integrated into OpenSSL.) - */ - -#define MONT_MUL_MOD -#define MONT_EXP_WORD -#define RECP_MUL_MOD - -#ifdef MONT_MUL_MOD - /* I have finally been able to take out this pre-condition of - * the top bit being set. It was caused by an error in BN_div - * with negatives. There was also another problem when for a^b%m - * a >= m. eay 07-May-97 */ -/* if ((m->d[m->top-1]&BN_TBIT) && BN_is_odd(m)) */ - - if (BN_is_odd(m)) - { -# ifdef MONT_EXP_WORD - if (a->top == 1 && !a->neg && (BN_get_flags(p, BN_FLG_CONSTTIME) == 0)) - { - BN_ULONG A = a->d[0]; - ret=BN_mod_exp_mont_word(r,A,p,m,ctx,NULL); - } - else -# endif - ret=BN_mod_exp_mont(r,a,p,m,ctx,NULL); - } - else -#endif -#ifdef RECP_MUL_MOD - { ret=BN_mod_exp_recp(r,a,p,m,ctx); } -#else - { ret=BN_mod_exp_simple(r,a,p,m,ctx); } -#endif - - bn_check_top(r); - return(ret); - } - - -int BN_mod_exp_recp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, - const BIGNUM *m, BN_CTX *ctx) - { - int i,j,bits,ret=0,wstart,wend,window,wvalue; - int start=1; - BIGNUM *aa; - /* Table of variables obtained from 'ctx' */ - BIGNUM *val[TABLE_SIZE]; - BN_RECP_CTX recp; - - if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0) - { - /* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */ - BNerr(BN_F_BN_MOD_EXP_RECP,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); - return -1; - } - - bits=BN_num_bits(p); - - if (bits == 0) - { - ret = BN_one(r); - return ret; - } - - BN_CTX_start(ctx); - aa = BN_CTX_get(ctx); - val[0] = BN_CTX_get(ctx); - if(!aa || !val[0]) goto err; - - BN_RECP_CTX_init(&recp); - if (m->neg) - { - /* ignore sign of 'm' */ - if (!BN_copy(aa, m)) goto err; - aa->neg = 0; - if (BN_RECP_CTX_set(&recp,aa,ctx) <= 0) goto err; - } - else - { - if (BN_RECP_CTX_set(&recp,m,ctx) <= 0) goto err; - } - - if (!BN_nnmod(val[0],a,m,ctx)) goto err; /* 1 */ - if (BN_is_zero(val[0])) - { - BN_zero(r); - ret = 1; - goto err; - } - - window = BN_window_bits_for_exponent_size(bits); - if (window > 1) - { - if (!BN_mod_mul_reciprocal(aa,val[0],val[0],&recp,ctx)) - goto err; /* 2 */ - j=1<<(window-1); - for (i=1; i<j; i++) - { - if(((val[i] = BN_CTX_get(ctx)) == NULL) || - !BN_mod_mul_reciprocal(val[i],val[i-1], - aa,&recp,ctx)) - goto err; - } - } - - start=1; /* This is used to avoid multiplication etc - * when there is only the value '1' in the - * buffer. */ - wvalue=0; /* The 'value' of the window */ - wstart=bits-1; /* The top bit of the window */ - wend=0; /* The bottom bit of the window */ - - if (!BN_one(r)) goto err; - - for (;;) - { - if (BN_is_bit_set(p,wstart) == 0) - { - if (!start) - if (!BN_mod_mul_reciprocal(r,r,r,&recp,ctx)) - goto err; - if (wstart == 0) break; - wstart--; - continue; - } - /* We now have wstart on a 'set' bit, we now need to work out - * how bit a window to do. To do this we need to scan - * forward until the last set bit before the end of the - * window */ - j=wstart; - wvalue=1; - wend=0; - for (i=1; i<window; i++) - { - if (wstart-i < 0) break; - if (BN_is_bit_set(p,wstart-i)) - { - wvalue<<=(i-wend); - wvalue|=1; - wend=i; - } - } - - /* wend is the size of the current window */ - j=wend+1; - /* add the 'bytes above' */ - if (!start) - for (i=0; i<j; i++) - { - if (!BN_mod_mul_reciprocal(r,r,r,&recp,ctx)) - goto err; - } - - /* wvalue will be an odd number < 2^window */ - if (!BN_mod_mul_reciprocal(r,r,val[wvalue>>1],&recp,ctx)) - goto err; - - /* move the 'window' down further */ - wstart-=wend+1; - wvalue=0; - start=0; - if (wstart < 0) break; - } - ret=1; -err: - BN_CTX_end(ctx); - BN_RECP_CTX_free(&recp); - bn_check_top(r); - return(ret); - } - - -int BN_mod_exp_mont(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p, - const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont) - { - int i,j,bits,ret=0,wstart,wend,window,wvalue; - int start=1; - BIGNUM *d,*r; - const BIGNUM *aa; - /* Table of variables obtained from 'ctx' */ - BIGNUM *val[TABLE_SIZE]; - BN_MONT_CTX *mont=NULL; - - if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0) - { - return BN_mod_exp_mont_consttime(rr, a, p, m, ctx, in_mont); - } - - bn_check_top(a); - bn_check_top(p); - bn_check_top(m); - - if (!BN_is_odd(m)) - { - BNerr(BN_F_BN_MOD_EXP_MONT,BN_R_CALLED_WITH_EVEN_MODULUS); - return(0); - } - bits=BN_num_bits(p); - if (bits == 0) - { - ret = BN_one(rr); - return ret; - } - - BN_CTX_start(ctx); - d = BN_CTX_get(ctx); - r = BN_CTX_get(ctx); - val[0] = BN_CTX_get(ctx); - if (!d || !r || !val[0]) goto err; - - /* If this is not done, things will break in the montgomery - * part */ - - if (in_mont != NULL) - mont=in_mont; - else - { - if ((mont=BN_MONT_CTX_new()) == NULL) goto err; - if (!BN_MONT_CTX_set(mont,m,ctx)) goto err; - } - - if (a->neg || BN_ucmp(a,m) >= 0) - { - if (!BN_nnmod(val[0],a,m,ctx)) - goto err; - aa= val[0]; - } - else - aa=a; - if (BN_is_zero(aa)) - { - BN_zero(rr); - ret = 1; - goto err; - } - if (!BN_to_montgomery(val[0],aa,mont,ctx)) goto err; /* 1 */ - - window = BN_window_bits_for_exponent_size(bits); - if (window > 1) - { - if (!BN_mod_mul_montgomery(d,val[0],val[0],mont,ctx)) goto err; /* 2 */ - j=1<<(window-1); - for (i=1; i<j; i++) - { - if(((val[i] = BN_CTX_get(ctx)) == NULL) || - !BN_mod_mul_montgomery(val[i],val[i-1], - d,mont,ctx)) - goto err; - } - } - - start=1; /* This is used to avoid multiplication etc - * when there is only the value '1' in the - * buffer. */ - wvalue=0; /* The 'value' of the window */ - wstart=bits-1; /* The top bit of the window */ - wend=0; /* The bottom bit of the window */ - - if (!BN_to_montgomery(r,BN_value_one(),mont,ctx)) goto err; - for (;;) - { - if (BN_is_bit_set(p,wstart) == 0) - { - if (!start) - { - if (!BN_mod_mul_montgomery(r,r,r,mont,ctx)) - goto err; - } - if (wstart == 0) break; - wstart--; - continue; - } - /* We now have wstart on a 'set' bit, we now need to work out - * how bit a window to do. To do this we need to scan - * forward until the last set bit before the end of the - * window */ - j=wstart; - wvalue=1; - wend=0; - for (i=1; i<window; i++) - { - if (wstart-i < 0) break; - if (BN_is_bit_set(p,wstart-i)) - { - wvalue<<=(i-wend); - wvalue|=1; - wend=i; - } - } - - /* wend is the size of the current window */ - j=wend+1; - /* add the 'bytes above' */ - if (!start) - for (i=0; i<j; i++) - { - if (!BN_mod_mul_montgomery(r,r,r,mont,ctx)) - goto err; - } - - /* wvalue will be an odd number < 2^window */ - if (!BN_mod_mul_montgomery(r,r,val[wvalue>>1],mont,ctx)) - goto err; - - /* move the 'window' down further */ - wstart-=wend+1; - wvalue=0; - start=0; - if (wstart < 0) break; - } - if (!BN_from_montgomery(rr,r,mont,ctx)) goto err; - ret=1; -err: - if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont); - BN_CTX_end(ctx); - bn_check_top(rr); - return(ret); - } - - -/* BN_mod_exp_mont_consttime() stores the precomputed powers in a specific layout - * so that accessing any of these table values shows the same access pattern as far - * as cache lines are concerned. The following functions are used to transfer a BIGNUM - * from/to that table. */ - -static int MOD_EXP_CTIME_COPY_TO_PREBUF(BIGNUM *b, int top, unsigned char *buf, int idx, int width) - { - size_t i, j; - - if (bn_wexpand(b, top) == NULL) - return 0; - while (b->top < top) - { - b->d[b->top++] = 0; - } - - for (i = 0, j=idx; i < top * sizeof b->d[0]; i++, j+=width) - { - buf[j] = ((unsigned char*)b->d)[i]; - } - - bn_correct_top(b); - return 1; - } - -static int MOD_EXP_CTIME_COPY_FROM_PREBUF(BIGNUM *b, int top, unsigned char *buf, int idx, int width) - { - size_t i, j; - - if (bn_wexpand(b, top) == NULL) - return 0; - - for (i=0, j=idx; i < top * sizeof b->d[0]; i++, j+=width) - { - ((unsigned char*)b->d)[i] = buf[j]; - } - - b->top = top; - bn_correct_top(b); - return 1; - } - -/* Given a pointer value, compute the next address that is a cache line multiple. */ -#define MOD_EXP_CTIME_ALIGN(x_) \ - ((unsigned char*)(x_) + (MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - (((BN_ULONG)(x_)) & (MOD_EXP_CTIME_MIN_CACHE_LINE_MASK)))) - -/* This variant of BN_mod_exp_mont() uses fixed windows and the special - * precomputation memory layout to limit data-dependency to a minimum - * to protect secret exponents (cf. the hyper-threading timing attacks - * pointed out by Colin Percival, - * http://www.daemonology.net/hyperthreading-considered-harmful/) - */ -int BN_mod_exp_mont_consttime(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p, - const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont) - { - int i,bits,ret=0,idx,window,wvalue; - int top; - BIGNUM *r; - const BIGNUM *aa; - BN_MONT_CTX *mont=NULL; - - int numPowers; - unsigned char *powerbufFree=NULL; - int powerbufLen = 0; - unsigned char *powerbuf=NULL; - BIGNUM *computeTemp=NULL, *am=NULL; - - bn_check_top(a); - bn_check_top(p); - bn_check_top(m); - - top = m->top; - - if (!(m->d[0] & 1)) - { - BNerr(BN_F_BN_MOD_EXP_MONT_CONSTTIME,BN_R_CALLED_WITH_EVEN_MODULUS); - return(0); - } - bits=BN_num_bits(p); - if (bits == 0) - { - ret = BN_one(rr); - return ret; - } - - /* Initialize BIGNUM context and allocate intermediate result */ - BN_CTX_start(ctx); - r = BN_CTX_get(ctx); - if (r == NULL) goto err; - - /* Allocate a montgomery context if it was not supplied by the caller. - * If this is not done, things will break in the montgomery part. - */ - if (in_mont != NULL) - mont=in_mont; - else - { - if ((mont=BN_MONT_CTX_new()) == NULL) goto err; - if (!BN_MONT_CTX_set(mont,m,ctx)) goto err; - } - - /* Get the window size to use with size of p. */ - window = BN_window_bits_for_ctime_exponent_size(bits); - - /* Allocate a buffer large enough to hold all of the pre-computed - * powers of a. - */ - numPowers = 1 << window; - powerbufLen = sizeof(m->d[0])*top*numPowers; - if ((powerbufFree=(unsigned char*)OPENSSL_malloc(powerbufLen+MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH)) == NULL) - goto err; - - powerbuf = MOD_EXP_CTIME_ALIGN(powerbufFree); - memset(powerbuf, 0, powerbufLen); - - /* Initialize the intermediate result. Do this early to save double conversion, - * once each for a^0 and intermediate result. - */ - if (!BN_to_montgomery(r,BN_value_one(),mont,ctx)) goto err; - if (!MOD_EXP_CTIME_COPY_TO_PREBUF(r, top, powerbuf, 0, numPowers)) goto err; - - /* Initialize computeTemp as a^1 with montgomery precalcs */ - computeTemp = BN_CTX_get(ctx); - am = BN_CTX_get(ctx); - if (computeTemp==NULL || am==NULL) goto err; - - if (a->neg || BN_ucmp(a,m) >= 0) - { - if (!BN_mod(am,a,m,ctx)) - goto err; - aa= am; - } - else - aa=a; - if (!BN_to_montgomery(am,aa,mont,ctx)) goto err; - if (!BN_copy(computeTemp, am)) goto err; - if (!MOD_EXP_CTIME_COPY_TO_PREBUF(am, top, powerbuf, 1, numPowers)) goto err; - - /* If the window size is greater than 1, then calculate - * val[i=2..2^winsize-1]. Powers are computed as a*a^(i-1) - * (even powers could instead be computed as (a^(i/2))^2 - * to use the slight performance advantage of sqr over mul). - */ - if (window > 1) - { - for (i=2; i<numPowers; i++) - { - /* Calculate a^i = a^(i-1) * a */ - if (!BN_mod_mul_montgomery(computeTemp,am,computeTemp,mont,ctx)) - goto err; - if (!MOD_EXP_CTIME_COPY_TO_PREBUF(computeTemp, top, powerbuf, i, numPowers)) goto err; - } - } - - /* Adjust the number of bits up to a multiple of the window size. - * If the exponent length is not a multiple of the window size, then - * this pads the most significant bits with zeros to normalize the - * scanning loop to there's no special cases. - * - * * NOTE: Making the window size a power of two less than the native - * * word size ensures that the padded bits won't go past the last - * * word in the internal BIGNUM structure. Going past the end will - * * still produce the correct result, but causes a different branch - * * to be taken in the BN_is_bit_set function. - */ - bits = ((bits+window-1)/window)*window; - idx=bits-1; /* The top bit of the window */ - - /* Scan the exponent one window at a time starting from the most - * significant bits. - */ - while (idx >= 0) - { - wvalue=0; /* The 'value' of the window */ - - /* Scan the window, squaring the result as we go */ - for (i=0; i<window; i++,idx--) - { - if (!BN_mod_mul_montgomery(r,r,r,mont,ctx)) goto err; - wvalue = (wvalue<<1)+BN_is_bit_set(p,idx); - } - - /* Fetch the appropriate pre-computed value from the pre-buf */ - if (!MOD_EXP_CTIME_COPY_FROM_PREBUF(computeTemp, top, powerbuf, wvalue, numPowers)) goto err; - - /* Multiply the result into the intermediate result */ - if (!BN_mod_mul_montgomery(r,r,computeTemp,mont,ctx)) goto err; - } - - /* Convert the final result from montgomery to standard format */ - if (!BN_from_montgomery(rr,r,mont,ctx)) goto err; - ret=1; -err: - if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont); - if (powerbuf!=NULL) - { - OPENSSL_cleanse(powerbuf,powerbufLen); - OPENSSL_free(powerbufFree); - } - if (am!=NULL) BN_clear(am); - if (computeTemp!=NULL) BN_clear(computeTemp); - BN_CTX_end(ctx); - return(ret); - } - -int BN_mod_exp_mont_word(BIGNUM *rr, BN_ULONG a, const BIGNUM *p, - const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont) - { - BN_MONT_CTX *mont = NULL; - int b, bits, ret=0; - int r_is_one; - BN_ULONG w, next_w; - BIGNUM *d, *r, *t; - BIGNUM *swap_tmp; -#define BN_MOD_MUL_WORD(r, w, m) \ - (BN_mul_word(r, (w)) && \ - (/* BN_ucmp(r, (m)) < 0 ? 1 :*/ \ - (BN_mod(t, r, m, ctx) && (swap_tmp = r, r = t, t = swap_tmp, 1)))) - /* BN_MOD_MUL_WORD is only used with 'w' large, - * so the BN_ucmp test is probably more overhead - * than always using BN_mod (which uses BN_copy if - * a similar test returns true). */ - /* We can use BN_mod and do not need BN_nnmod because our - * accumulator is never negative (the result of BN_mod does - * not depend on the sign of the modulus). - */ -#define BN_TO_MONTGOMERY_WORD(r, w, mont) \ - (BN_set_word(r, (w)) && BN_to_montgomery(r, r, (mont), ctx)) - - if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0) - { - /* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */ - BNerr(BN_F_BN_MOD_EXP_MONT_WORD,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); - return -1; - } - - bn_check_top(p); - bn_check_top(m); - - if (!BN_is_odd(m)) - { - BNerr(BN_F_BN_MOD_EXP_MONT_WORD,BN_R_CALLED_WITH_EVEN_MODULUS); - return(0); - } - if (m->top == 1) - a %= m->d[0]; /* make sure that 'a' is reduced */ - - bits = BN_num_bits(p); - if (bits == 0) - { - ret = BN_one(rr); - return ret; - } - if (a == 0) - { - BN_zero(rr); - ret = 1; - return ret; - } - - BN_CTX_start(ctx); - d = BN_CTX_get(ctx); - r = BN_CTX_get(ctx); - t = BN_CTX_get(ctx); - if (d == NULL || r == NULL || t == NULL) goto err; - - if (in_mont != NULL) - mont=in_mont; - else - { - if ((mont = BN_MONT_CTX_new()) == NULL) goto err; - if (!BN_MONT_CTX_set(mont, m, ctx)) goto err; - } - - r_is_one = 1; /* except for Montgomery factor */ - - /* bits-1 >= 0 */ - - /* The result is accumulated in the product r*w. */ - w = a; /* bit 'bits-1' of 'p' is always set */ - for (b = bits-2; b >= 0; b--) - { - /* First, square r*w. */ - next_w = w*w; - if ((next_w/w) != w) /* overflow */ - { - if (r_is_one) - { - if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err; - r_is_one = 0; - } - else - { - if (!BN_MOD_MUL_WORD(r, w, m)) goto err; - } - next_w = 1; - } - w = next_w; - if (!r_is_one) - { - if (!BN_mod_mul_montgomery(r, r, r, mont, ctx)) goto err; - } - - /* Second, multiply r*w by 'a' if exponent bit is set. */ - if (BN_is_bit_set(p, b)) - { - next_w = w*a; - if ((next_w/a) != w) /* overflow */ - { - if (r_is_one) - { - if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err; - r_is_one = 0; - } - else - { - if (!BN_MOD_MUL_WORD(r, w, m)) goto err; - } - next_w = a; - } - w = next_w; - } - } - - /* Finally, set r:=r*w. */ - if (w != 1) - { - if (r_is_one) - { - if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err; - r_is_one = 0; - } - else - { - if (!BN_MOD_MUL_WORD(r, w, m)) goto err; - } - } - - if (r_is_one) /* can happen only if a == 1*/ - { - if (!BN_one(rr)) goto err; - } - else - { - if (!BN_from_montgomery(rr, r, mont, ctx)) goto err; - } - ret = 1; -err: - if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont); - BN_CTX_end(ctx); - bn_check_top(rr); - return(ret); - } - - -/* The old fallback, simple version :-) */ -int BN_mod_exp_simple(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, - const BIGNUM *m, BN_CTX *ctx) - { - int i,j,bits,ret=0,wstart,wend,window,wvalue; - int start=1; - BIGNUM *d; - /* Table of variables obtained from 'ctx' */ - BIGNUM *val[TABLE_SIZE]; - - if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0) - { - /* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */ - BNerr(BN_F_BN_MOD_EXP_SIMPLE,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); - return -1; - } - - bits=BN_num_bits(p); - - if (bits == 0) - { - ret = BN_one(r); - return ret; - } - - BN_CTX_start(ctx); - d = BN_CTX_get(ctx); - val[0] = BN_CTX_get(ctx); - if(!d || !val[0]) goto err; - - if (!BN_nnmod(val[0],a,m,ctx)) goto err; /* 1 */ - if (BN_is_zero(val[0])) - { - BN_zero(r); - ret = 1; - goto err; - } - - window = BN_window_bits_for_exponent_size(bits); - if (window > 1) - { - if (!BN_mod_mul(d,val[0],val[0],m,ctx)) - goto err; /* 2 */ - j=1<<(window-1); - for (i=1; i<j; i++) - { - if(((val[i] = BN_CTX_get(ctx)) == NULL) || - !BN_mod_mul(val[i],val[i-1],d,m,ctx)) - goto err; - } - } - - start=1; /* This is used to avoid multiplication etc - * when there is only the value '1' in the - * buffer. */ - wvalue=0; /* The 'value' of the window */ - wstart=bits-1; /* The top bit of the window */ - wend=0; /* The bottom bit of the window */ - - if (!BN_one(r)) goto err; - - for (;;) - { - if (BN_is_bit_set(p,wstart) == 0) - { - if (!start) - if (!BN_mod_mul(r,r,r,m,ctx)) - goto err; - if (wstart == 0) break; - wstart--; - continue; - } - /* We now have wstart on a 'set' bit, we now need to work out - * how bit a window to do. To do this we need to scan - * forward until the last set bit before the end of the - * window */ - j=wstart; - wvalue=1; - wend=0; - for (i=1; i<window; i++) - { - if (wstart-i < 0) break; - if (BN_is_bit_set(p,wstart-i)) - { - wvalue<<=(i-wend); - wvalue|=1; - wend=i; - } - } - - /* wend is the size of the current window */ - j=wend+1; - /* add the 'bytes above' */ - if (!start) - for (i=0; i<j; i++) - { - if (!BN_mod_mul(r,r,r,m,ctx)) - goto err; - } - - /* wvalue will be an odd number < 2^window */ - if (!BN_mod_mul(r,r,val[wvalue>>1],m,ctx)) - goto err; - - /* move the 'window' down further */ - wstart-=wend+1; - wvalue=0; - start=0; - if (wstart < 0) break; - } - ret=1; -err: - BN_CTX_end(ctx); - bn_check_top(r); - return(ret); - } - diff --git a/app/openssl/crypto/bn/bn_exp2.c b/app/openssl/crypto/bn/bn_exp2.c deleted file mode 100644 index bd0c34b9..00000000 --- a/app/openssl/crypto/bn/bn_exp2.c +++ /dev/null @@ -1,312 +0,0 @@ -/* crypto/bn/bn_exp2.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ -/* ==================================================================== - * Copyright (c) 1998-2000 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -#include <stdio.h> -#include "cryptlib.h" -#include "bn_lcl.h" - -#define TABLE_SIZE 32 - -int BN_mod_exp2_mont(BIGNUM *rr, const BIGNUM *a1, const BIGNUM *p1, - const BIGNUM *a2, const BIGNUM *p2, const BIGNUM *m, - BN_CTX *ctx, BN_MONT_CTX *in_mont) - { - int i,j,bits,b,bits1,bits2,ret=0,wpos1,wpos2,window1,window2,wvalue1,wvalue2; - int r_is_one=1; - BIGNUM *d,*r; - const BIGNUM *a_mod_m; - /* Tables of variables obtained from 'ctx' */ - BIGNUM *val1[TABLE_SIZE], *val2[TABLE_SIZE]; - BN_MONT_CTX *mont=NULL; - - bn_check_top(a1); - bn_check_top(p1); - bn_check_top(a2); - bn_check_top(p2); - bn_check_top(m); - - if (!(m->d[0] & 1)) - { - BNerr(BN_F_BN_MOD_EXP2_MONT,BN_R_CALLED_WITH_EVEN_MODULUS); - return(0); - } - bits1=BN_num_bits(p1); - bits2=BN_num_bits(p2); - if ((bits1 == 0) && (bits2 == 0)) - { - ret = BN_one(rr); - return ret; - } - - bits=(bits1 > bits2)?bits1:bits2; - - BN_CTX_start(ctx); - d = BN_CTX_get(ctx); - r = BN_CTX_get(ctx); - val1[0] = BN_CTX_get(ctx); - val2[0] = BN_CTX_get(ctx); - if(!d || !r || !val1[0] || !val2[0]) goto err; - - if (in_mont != NULL) - mont=in_mont; - else - { - if ((mont=BN_MONT_CTX_new()) == NULL) goto err; - if (!BN_MONT_CTX_set(mont,m,ctx)) goto err; - } - - window1 = BN_window_bits_for_exponent_size(bits1); - window2 = BN_window_bits_for_exponent_size(bits2); - - /* - * Build table for a1: val1[i] := a1^(2*i + 1) mod m for i = 0 .. 2^(window1-1) - */ - if (a1->neg || BN_ucmp(a1,m) >= 0) - { - if (!BN_mod(val1[0],a1,m,ctx)) - goto err; - a_mod_m = val1[0]; - } - else - a_mod_m = a1; - if (BN_is_zero(a_mod_m)) - { - BN_zero(rr); - ret = 1; - goto err; - } - - if (!BN_to_montgomery(val1[0],a_mod_m,mont,ctx)) goto err; - if (window1 > 1) - { - if (!BN_mod_mul_montgomery(d,val1[0],val1[0],mont,ctx)) goto err; - - j=1<<(window1-1); - for (i=1; i<j; i++) - { - if(((val1[i] = BN_CTX_get(ctx)) == NULL) || - !BN_mod_mul_montgomery(val1[i],val1[i-1], - d,mont,ctx)) - goto err; - } - } - - - /* - * Build table for a2: val2[i] := a2^(2*i + 1) mod m for i = 0 .. 2^(window2-1) - */ - if (a2->neg || BN_ucmp(a2,m) >= 0) - { - if (!BN_mod(val2[0],a2,m,ctx)) - goto err; - a_mod_m = val2[0]; - } - else - a_mod_m = a2; - if (BN_is_zero(a_mod_m)) - { - BN_zero(rr); - ret = 1; - goto err; - } - if (!BN_to_montgomery(val2[0],a_mod_m,mont,ctx)) goto err; - if (window2 > 1) - { - if (!BN_mod_mul_montgomery(d,val2[0],val2[0],mont,ctx)) goto err; - - j=1<<(window2-1); - for (i=1; i<j; i++) - { - if(((val2[i] = BN_CTX_get(ctx)) == NULL) || - !BN_mod_mul_montgomery(val2[i],val2[i-1], - d,mont,ctx)) - goto err; - } - } - - - /* Now compute the power product, using independent windows. */ - r_is_one=1; - wvalue1=0; /* The 'value' of the first window */ - wvalue2=0; /* The 'value' of the second window */ - wpos1=0; /* If wvalue1 > 0, the bottom bit of the first window */ - wpos2=0; /* If wvalue2 > 0, the bottom bit of the second window */ - - if (!BN_to_montgomery(r,BN_value_one(),mont,ctx)) goto err; - for (b=bits-1; b>=0; b--) - { - if (!r_is_one) - { - if (!BN_mod_mul_montgomery(r,r,r,mont,ctx)) - goto err; - } - - if (!wvalue1) - if (BN_is_bit_set(p1, b)) - { - /* consider bits b-window1+1 .. b for this window */ - i = b-window1+1; - while (!BN_is_bit_set(p1, i)) /* works for i<0 */ - i++; - wpos1 = i; - wvalue1 = 1; - for (i = b-1; i >= wpos1; i--) - { - wvalue1 <<= 1; - if (BN_is_bit_set(p1, i)) - wvalue1++; - } - } - - if (!wvalue2) - if (BN_is_bit_set(p2, b)) - { - /* consider bits b-window2+1 .. b for this window */ - i = b-window2+1; - while (!BN_is_bit_set(p2, i)) - i++; - wpos2 = i; - wvalue2 = 1; - for (i = b-1; i >= wpos2; i--) - { - wvalue2 <<= 1; - if (BN_is_bit_set(p2, i)) - wvalue2++; - } - } - - if (wvalue1 && b == wpos1) - { - /* wvalue1 is odd and < 2^window1 */ - if (!BN_mod_mul_montgomery(r,r,val1[wvalue1>>1],mont,ctx)) - goto err; - wvalue1 = 0; - r_is_one = 0; - } - - if (wvalue2 && b == wpos2) - { - /* wvalue2 is odd and < 2^window2 */ - if (!BN_mod_mul_montgomery(r,r,val2[wvalue2>>1],mont,ctx)) - goto err; - wvalue2 = 0; - r_is_one = 0; - } - } - if (!BN_from_montgomery(rr,r,mont,ctx)) - goto err; - ret=1; -err: - if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont); - BN_CTX_end(ctx); - bn_check_top(rr); - return(ret); - } diff --git a/app/openssl/crypto/bn/bn_gcd.c b/app/openssl/crypto/bn/bn_gcd.c deleted file mode 100644 index 4a352119..00000000 --- a/app/openssl/crypto/bn/bn_gcd.c +++ /dev/null @@ -1,654 +0,0 @@ -/* crypto/bn/bn_gcd.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ -/* ==================================================================== - * Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -#include "cryptlib.h" -#include "bn_lcl.h" - -static BIGNUM *euclid(BIGNUM *a, BIGNUM *b); - -int BN_gcd(BIGNUM *r, const BIGNUM *in_a, const BIGNUM *in_b, BN_CTX *ctx) - { - BIGNUM *a,*b,*t; - int ret=0; - - bn_check_top(in_a); - bn_check_top(in_b); - - BN_CTX_start(ctx); - a = BN_CTX_get(ctx); - b = BN_CTX_get(ctx); - if (a == NULL || b == NULL) goto err; - - if (BN_copy(a,in_a) == NULL) goto err; - if (BN_copy(b,in_b) == NULL) goto err; - a->neg = 0; - b->neg = 0; - - if (BN_cmp(a,b) < 0) { t=a; a=b; b=t; } - t=euclid(a,b); - if (t == NULL) goto err; - - if (BN_copy(r,t) == NULL) goto err; - ret=1; -err: - BN_CTX_end(ctx); - bn_check_top(r); - return(ret); - } - -static BIGNUM *euclid(BIGNUM *a, BIGNUM *b) - { - BIGNUM *t; - int shifts=0; - - bn_check_top(a); - bn_check_top(b); - - /* 0 <= b <= a */ - while (!BN_is_zero(b)) - { - /* 0 < b <= a */ - - if (BN_is_odd(a)) - { - if (BN_is_odd(b)) - { - if (!BN_sub(a,a,b)) goto err; - if (!BN_rshift1(a,a)) goto err; - if (BN_cmp(a,b) < 0) - { t=a; a=b; b=t; } - } - else /* a odd - b even */ - { - if (!BN_rshift1(b,b)) goto err; - if (BN_cmp(a,b) < 0) - { t=a; a=b; b=t; } - } - } - else /* a is even */ - { - if (BN_is_odd(b)) - { - if (!BN_rshift1(a,a)) goto err; - if (BN_cmp(a,b) < 0) - { t=a; a=b; b=t; } - } - else /* a even - b even */ - { - if (!BN_rshift1(a,a)) goto err; - if (!BN_rshift1(b,b)) goto err; - shifts++; - } - } - /* 0 <= b <= a */ - } - - if (shifts) - { - if (!BN_lshift(a,a,shifts)) goto err; - } - bn_check_top(a); - return(a); -err: - return(NULL); - } - - -/* solves ax == 1 (mod n) */ -static BIGNUM *BN_mod_inverse_no_branch(BIGNUM *in, - const BIGNUM *a, const BIGNUM *n, BN_CTX *ctx); -BIGNUM *BN_mod_inverse(BIGNUM *in, - const BIGNUM *a, const BIGNUM *n, BN_CTX *ctx) - { - BIGNUM *A,*B,*X,*Y,*M,*D,*T,*R=NULL; - BIGNUM *ret=NULL; - int sign; - - if ((BN_get_flags(a, BN_FLG_CONSTTIME) != 0) || (BN_get_flags(n, BN_FLG_CONSTTIME) != 0)) - { - return BN_mod_inverse_no_branch(in, a, n, ctx); - } - - bn_check_top(a); - bn_check_top(n); - - BN_CTX_start(ctx); - A = BN_CTX_get(ctx); - B = BN_CTX_get(ctx); - X = BN_CTX_get(ctx); - D = BN_CTX_get(ctx); - M = BN_CTX_get(ctx); - Y = BN_CTX_get(ctx); - T = BN_CTX_get(ctx); - if (T == NULL) goto err; - - if (in == NULL) - R=BN_new(); - else - R=in; - if (R == NULL) goto err; - - BN_one(X); - BN_zero(Y); - if (BN_copy(B,a) == NULL) goto err; - if (BN_copy(A,n) == NULL) goto err; - A->neg = 0; - if (B->neg || (BN_ucmp(B, A) >= 0)) - { - if (!BN_nnmod(B, B, A, ctx)) goto err; - } - sign = -1; - /* From B = a mod |n|, A = |n| it follows that - * - * 0 <= B < A, - * -sign*X*a == B (mod |n|), - * sign*Y*a == A (mod |n|). - */ - - if (BN_is_odd(n) && (BN_num_bits(n) <= (BN_BITS <= 32 ? 450 : 2048))) - { - /* Binary inversion algorithm; requires odd modulus. - * This is faster than the general algorithm if the modulus - * is sufficiently small (about 400 .. 500 bits on 32-bit - * sytems, but much more on 64-bit systems) */ - int shift; - - while (!BN_is_zero(B)) - { - /* - * 0 < B < |n|, - * 0 < A <= |n|, - * (1) -sign*X*a == B (mod |n|), - * (2) sign*Y*a == A (mod |n|) - */ - - /* Now divide B by the maximum possible power of two in the integers, - * and divide X by the same value mod |n|. - * When we're done, (1) still holds. */ - shift = 0; - while (!BN_is_bit_set(B, shift)) /* note that 0 < B */ - { - shift++; - - if (BN_is_odd(X)) - { - if (!BN_uadd(X, X, n)) goto err; - } - /* now X is even, so we can easily divide it by two */ - if (!BN_rshift1(X, X)) goto err; - } - if (shift > 0) - { - if (!BN_rshift(B, B, shift)) goto err; - } - - - /* Same for A and Y. Afterwards, (2) still holds. */ - shift = 0; - while (!BN_is_bit_set(A, shift)) /* note that 0 < A */ - { - shift++; - - if (BN_is_odd(Y)) - { - if (!BN_uadd(Y, Y, n)) goto err; - } - /* now Y is even */ - if (!BN_rshift1(Y, Y)) goto err; - } - if (shift > 0) - { - if (!BN_rshift(A, A, shift)) goto err; - } - - - /* We still have (1) and (2). - * Both A and B are odd. - * The following computations ensure that - * - * 0 <= B < |n|, - * 0 < A < |n|, - * (1) -sign*X*a == B (mod |n|), - * (2) sign*Y*a == A (mod |n|), - * - * and that either A or B is even in the next iteration. - */ - if (BN_ucmp(B, A) >= 0) - { - /* -sign*(X + Y)*a == B - A (mod |n|) */ - if (!BN_uadd(X, X, Y)) goto err; - /* NB: we could use BN_mod_add_quick(X, X, Y, n), but that - * actually makes the algorithm slower */ - if (!BN_usub(B, B, A)) goto err; - } - else - { - /* sign*(X + Y)*a == A - B (mod |n|) */ - if (!BN_uadd(Y, Y, X)) goto err; - /* as above, BN_mod_add_quick(Y, Y, X, n) would slow things down */ - if (!BN_usub(A, A, B)) goto err; - } - } - } - else - { - /* general inversion algorithm */ - - while (!BN_is_zero(B)) - { - BIGNUM *tmp; - - /* - * 0 < B < A, - * (*) -sign*X*a == B (mod |n|), - * sign*Y*a == A (mod |n|) - */ - - /* (D, M) := (A/B, A%B) ... */ - if (BN_num_bits(A) == BN_num_bits(B)) - { - if (!BN_one(D)) goto err; - if (!BN_sub(M,A,B)) goto err; - } - else if (BN_num_bits(A) == BN_num_bits(B) + 1) - { - /* A/B is 1, 2, or 3 */ - if (!BN_lshift1(T,B)) goto err; - if (BN_ucmp(A,T) < 0) - { - /* A < 2*B, so D=1 */ - if (!BN_one(D)) goto err; - if (!BN_sub(M,A,B)) goto err; - } - else - { - /* A >= 2*B, so D=2 or D=3 */ - if (!BN_sub(M,A,T)) goto err; - if (!BN_add(D,T,B)) goto err; /* use D (:= 3*B) as temp */ - if (BN_ucmp(A,D) < 0) - { - /* A < 3*B, so D=2 */ - if (!BN_set_word(D,2)) goto err; - /* M (= A - 2*B) already has the correct value */ - } - else - { - /* only D=3 remains */ - if (!BN_set_word(D,3)) goto err; - /* currently M = A - 2*B, but we need M = A - 3*B */ - if (!BN_sub(M,M,B)) goto err; - } - } - } - else - { - if (!BN_div(D,M,A,B,ctx)) goto err; - } - - /* Now - * A = D*B + M; - * thus we have - * (**) sign*Y*a == D*B + M (mod |n|). - */ - - tmp=A; /* keep the BIGNUM object, the value does not matter */ - - /* (A, B) := (B, A mod B) ... */ - A=B; - B=M; - /* ... so we have 0 <= B < A again */ - - /* Since the former M is now B and the former B is now A, - * (**) translates into - * sign*Y*a == D*A + B (mod |n|), - * i.e. - * sign*Y*a - D*A == B (mod |n|). - * Similarly, (*) translates into - * -sign*X*a == A (mod |n|). - * - * Thus, - * sign*Y*a + D*sign*X*a == B (mod |n|), - * i.e. - * sign*(Y + D*X)*a == B (mod |n|). - * - * So if we set (X, Y, sign) := (Y + D*X, X, -sign), we arrive back at - * -sign*X*a == B (mod |n|), - * sign*Y*a == A (mod |n|). - * Note that X and Y stay non-negative all the time. - */ - - /* most of the time D is very small, so we can optimize tmp := D*X+Y */ - if (BN_is_one(D)) - { - if (!BN_add(tmp,X,Y)) goto err; - } - else - { - if (BN_is_word(D,2)) - { - if (!BN_lshift1(tmp,X)) goto err; - } - else if (BN_is_word(D,4)) - { - if (!BN_lshift(tmp,X,2)) goto err; - } - else if (D->top == 1) - { - if (!BN_copy(tmp,X)) goto err; - if (!BN_mul_word(tmp,D->d[0])) goto err; - } - else - { - if (!BN_mul(tmp,D,X,ctx)) goto err; - } - if (!BN_add(tmp,tmp,Y)) goto err; - } - - M=Y; /* keep the BIGNUM object, the value does not matter */ - Y=X; - X=tmp; - sign = -sign; - } - } - - /* - * The while loop (Euclid's algorithm) ends when - * A == gcd(a,n); - * we have - * sign*Y*a == A (mod |n|), - * where Y is non-negative. - */ - - if (sign < 0) - { - if (!BN_sub(Y,n,Y)) goto err; - } - /* Now Y*a == A (mod |n|). */ - - - if (BN_is_one(A)) - { - /* Y*a == 1 (mod |n|) */ - if (!Y->neg && BN_ucmp(Y,n) < 0) - { - if (!BN_copy(R,Y)) goto err; - } - else - { - if (!BN_nnmod(R,Y,n,ctx)) goto err; - } - } - else - { - BNerr(BN_F_BN_MOD_INVERSE,BN_R_NO_INVERSE); - goto err; - } - ret=R; -err: - if ((ret == NULL) && (in == NULL)) BN_free(R); - BN_CTX_end(ctx); - bn_check_top(ret); - return(ret); - } - - -/* BN_mod_inverse_no_branch is a special version of BN_mod_inverse. - * It does not contain branches that may leak sensitive information. - */ -static BIGNUM *BN_mod_inverse_no_branch(BIGNUM *in, - const BIGNUM *a, const BIGNUM *n, BN_CTX *ctx) - { - BIGNUM *A,*B,*X,*Y,*M,*D,*T,*R=NULL; - BIGNUM local_A, local_B; - BIGNUM *pA, *pB; - BIGNUM *ret=NULL; - int sign; - - bn_check_top(a); - bn_check_top(n); - - BN_CTX_start(ctx); - A = BN_CTX_get(ctx); - B = BN_CTX_get(ctx); - X = BN_CTX_get(ctx); - D = BN_CTX_get(ctx); - M = BN_CTX_get(ctx); - Y = BN_CTX_get(ctx); - T = BN_CTX_get(ctx); - if (T == NULL) goto err; - - if (in == NULL) - R=BN_new(); - else - R=in; - if (R == NULL) goto err; - - BN_one(X); - BN_zero(Y); - if (BN_copy(B,a) == NULL) goto err; - if (BN_copy(A,n) == NULL) goto err; - A->neg = 0; - - if (B->neg || (BN_ucmp(B, A) >= 0)) - { - /* Turn BN_FLG_CONSTTIME flag on, so that when BN_div is invoked, - * BN_div_no_branch will be called eventually. - */ - pB = &local_B; - BN_with_flags(pB, B, BN_FLG_CONSTTIME); - if (!BN_nnmod(B, pB, A, ctx)) goto err; - } - sign = -1; - /* From B = a mod |n|, A = |n| it follows that - * - * 0 <= B < A, - * -sign*X*a == B (mod |n|), - * sign*Y*a == A (mod |n|). - */ - - while (!BN_is_zero(B)) - { - BIGNUM *tmp; - - /* - * 0 < B < A, - * (*) -sign*X*a == B (mod |n|), - * sign*Y*a == A (mod |n|) - */ - - /* Turn BN_FLG_CONSTTIME flag on, so that when BN_div is invoked, - * BN_div_no_branch will be called eventually. - */ - pA = &local_A; - BN_with_flags(pA, A, BN_FLG_CONSTTIME); - - /* (D, M) := (A/B, A%B) ... */ - if (!BN_div(D,M,pA,B,ctx)) goto err; - - /* Now - * A = D*B + M; - * thus we have - * (**) sign*Y*a == D*B + M (mod |n|). - */ - - tmp=A; /* keep the BIGNUM object, the value does not matter */ - - /* (A, B) := (B, A mod B) ... */ - A=B; - B=M; - /* ... so we have 0 <= B < A again */ - - /* Since the former M is now B and the former B is now A, - * (**) translates into - * sign*Y*a == D*A + B (mod |n|), - * i.e. - * sign*Y*a - D*A == B (mod |n|). - * Similarly, (*) translates into - * -sign*X*a == A (mod |n|). - * - * Thus, - * sign*Y*a + D*sign*X*a == B (mod |n|), - * i.e. - * sign*(Y + D*X)*a == B (mod |n|). - * - * So if we set (X, Y, sign) := (Y + D*X, X, -sign), we arrive back at - * -sign*X*a == B (mod |n|), - * sign*Y*a == A (mod |n|). - * Note that X and Y stay non-negative all the time. - */ - - if (!BN_mul(tmp,D,X,ctx)) goto err; - if (!BN_add(tmp,tmp,Y)) goto err; - - M=Y; /* keep the BIGNUM object, the value does not matter */ - Y=X; - X=tmp; - sign = -sign; - } - - /* - * The while loop (Euclid's algorithm) ends when - * A == gcd(a,n); - * we have - * sign*Y*a == A (mod |n|), - * where Y is non-negative. - */ - - if (sign < 0) - { - if (!BN_sub(Y,n,Y)) goto err; - } - /* Now Y*a == A (mod |n|). */ - - if (BN_is_one(A)) - { - /* Y*a == 1 (mod |n|) */ - if (!Y->neg && BN_ucmp(Y,n) < 0) - { - if (!BN_copy(R,Y)) goto err; - } - else - { - if (!BN_nnmod(R,Y,n,ctx)) goto err; - } - } - else - { - BNerr(BN_F_BN_MOD_INVERSE_NO_BRANCH,BN_R_NO_INVERSE); - goto err; - } - ret=R; -err: - if ((ret == NULL) && (in == NULL)) BN_free(R); - BN_CTX_end(ctx); - bn_check_top(ret); - return(ret); - } diff --git a/app/openssl/crypto/bn/bn_gf2m.c b/app/openssl/crypto/bn/bn_gf2m.c deleted file mode 100644 index 432a3aa3..00000000 --- a/app/openssl/crypto/bn/bn_gf2m.c +++ /dev/null @@ -1,1035 +0,0 @@ -/* crypto/bn/bn_gf2m.c */ -/* ==================================================================== - * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. - * - * The Elliptic Curve Public-Key Crypto Library (ECC Code) included - * herein is developed by SUN MICROSYSTEMS, INC., and is contributed - * to the OpenSSL project. - * - * The ECC Code is licensed pursuant to the OpenSSL open source - * license provided below. - * - * In addition, Sun covenants to all licensees who provide a reciprocal - * covenant with respect to their own patents if any, not to sue under - * current and future patent claims necessarily infringed by the making, - * using, practicing, selling, offering for sale and/or otherwise - * disposing of the ECC Code as delivered hereunder (or portions thereof), - * provided that such covenant shall not apply: - * 1) for code that a licensee deletes from the ECC Code; - * 2) separates from the ECC Code; or - * 3) for infringements caused by: - * i) the modification of the ECC Code or - * ii) the combination of the ECC Code with other software or - * devices where such combination causes the infringement. - * - * The software is originally written by Sheueling Chang Shantz and - * Douglas Stebila of Sun Microsystems Laboratories. - * - */ - -/* NOTE: This file is licensed pursuant to the OpenSSL license below - * and may be modified; but after modifications, the above covenant - * may no longer apply! In such cases, the corresponding paragraph - * ["In addition, Sun covenants ... causes the infringement."] and - * this note can be edited out; but please keep the Sun copyright - * notice and attribution. */ - -/* ==================================================================== - * Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -#include <assert.h> -#include <limits.h> -#include <stdio.h> -#include "cryptlib.h" -#include "bn_lcl.h" - -/* Maximum number of iterations before BN_GF2m_mod_solve_quad_arr should fail. */ -#define MAX_ITERATIONS 50 - -static const BN_ULONG SQR_tb[16] = - { 0, 1, 4, 5, 16, 17, 20, 21, - 64, 65, 68, 69, 80, 81, 84, 85 }; -/* Platform-specific macros to accelerate squaring. */ -#if defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG) -#define SQR1(w) \ - SQR_tb[(w) >> 60 & 0xF] << 56 | SQR_tb[(w) >> 56 & 0xF] << 48 | \ - SQR_tb[(w) >> 52 & 0xF] << 40 | SQR_tb[(w) >> 48 & 0xF] << 32 | \ - SQR_tb[(w) >> 44 & 0xF] << 24 | SQR_tb[(w) >> 40 & 0xF] << 16 | \ - SQR_tb[(w) >> 36 & 0xF] << 8 | SQR_tb[(w) >> 32 & 0xF] -#define SQR0(w) \ - SQR_tb[(w) >> 28 & 0xF] << 56 | SQR_tb[(w) >> 24 & 0xF] << 48 | \ - SQR_tb[(w) >> 20 & 0xF] << 40 | SQR_tb[(w) >> 16 & 0xF] << 32 | \ - SQR_tb[(w) >> 12 & 0xF] << 24 | SQR_tb[(w) >> 8 & 0xF] << 16 | \ - SQR_tb[(w) >> 4 & 0xF] << 8 | SQR_tb[(w) & 0xF] -#endif -#ifdef THIRTY_TWO_BIT -#define SQR1(w) \ - SQR_tb[(w) >> 28 & 0xF] << 24 | SQR_tb[(w) >> 24 & 0xF] << 16 | \ - SQR_tb[(w) >> 20 & 0xF] << 8 | SQR_tb[(w) >> 16 & 0xF] -#define SQR0(w) \ - SQR_tb[(w) >> 12 & 0xF] << 24 | SQR_tb[(w) >> 8 & 0xF] << 16 | \ - SQR_tb[(w) >> 4 & 0xF] << 8 | SQR_tb[(w) & 0xF] -#endif - -/* Product of two polynomials a, b each with degree < BN_BITS2 - 1, - * result is a polynomial r with degree < 2 * BN_BITS - 1 - * The caller MUST ensure that the variables have the right amount - * of space allocated. - */ -#ifdef THIRTY_TWO_BIT -static void bn_GF2m_mul_1x1(BN_ULONG *r1, BN_ULONG *r0, const BN_ULONG a, const BN_ULONG b) - { - register BN_ULONG h, l, s; - BN_ULONG tab[8], top2b = a >> 30; - register BN_ULONG a1, a2, a4; - - a1 = a & (0x3FFFFFFF); a2 = a1 << 1; a4 = a2 << 1; - - tab[0] = 0; tab[1] = a1; tab[2] = a2; tab[3] = a1^a2; - tab[4] = a4; tab[5] = a1^a4; tab[6] = a2^a4; tab[7] = a1^a2^a4; - - s = tab[b & 0x7]; l = s; - s = tab[b >> 3 & 0x7]; l ^= s << 3; h = s >> 29; - s = tab[b >> 6 & 0x7]; l ^= s << 6; h ^= s >> 26; - s = tab[b >> 9 & 0x7]; l ^= s << 9; h ^= s >> 23; - s = tab[b >> 12 & 0x7]; l ^= s << 12; h ^= s >> 20; - s = tab[b >> 15 & 0x7]; l ^= s << 15; h ^= s >> 17; - s = tab[b >> 18 & 0x7]; l ^= s << 18; h ^= s >> 14; - s = tab[b >> 21 & 0x7]; l ^= s << 21; h ^= s >> 11; - s = tab[b >> 24 & 0x7]; l ^= s << 24; h ^= s >> 8; - s = tab[b >> 27 & 0x7]; l ^= s << 27; h ^= s >> 5; - s = tab[b >> 30 ]; l ^= s << 30; h ^= s >> 2; - - /* compensate for the top two bits of a */ - - if (top2b & 01) { l ^= b << 30; h ^= b >> 2; } - if (top2b & 02) { l ^= b << 31; h ^= b >> 1; } - - *r1 = h; *r0 = l; - } -#endif -#if defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG) -static void bn_GF2m_mul_1x1(BN_ULONG *r1, BN_ULONG *r0, const BN_ULONG a, const BN_ULONG b) - { - register BN_ULONG h, l, s; - BN_ULONG tab[16], top3b = a >> 61; - register BN_ULONG a1, a2, a4, a8; - - a1 = a & (0x1FFFFFFFFFFFFFFFULL); a2 = a1 << 1; a4 = a2 << 1; a8 = a4 << 1; - - tab[ 0] = 0; tab[ 1] = a1; tab[ 2] = a2; tab[ 3] = a1^a2; - tab[ 4] = a4; tab[ 5] = a1^a4; tab[ 6] = a2^a4; tab[ 7] = a1^a2^a4; - tab[ 8] = a8; tab[ 9] = a1^a8; tab[10] = a2^a8; tab[11] = a1^a2^a8; - tab[12] = a4^a8; tab[13] = a1^a4^a8; tab[14] = a2^a4^a8; tab[15] = a1^a2^a4^a8; - - s = tab[b & 0xF]; l = s; - s = tab[b >> 4 & 0xF]; l ^= s << 4; h = s >> 60; - s = tab[b >> 8 & 0xF]; l ^= s << 8; h ^= s >> 56; - s = tab[b >> 12 & 0xF]; l ^= s << 12; h ^= s >> 52; - s = tab[b >> 16 & 0xF]; l ^= s << 16; h ^= s >> 48; - s = tab[b >> 20 & 0xF]; l ^= s << 20; h ^= s >> 44; - s = tab[b >> 24 & 0xF]; l ^= s << 24; h ^= s >> 40; - s = tab[b >> 28 & 0xF]; l ^= s << 28; h ^= s >> 36; - s = tab[b >> 32 & 0xF]; l ^= s << 32; h ^= s >> 32; - s = tab[b >> 36 & 0xF]; l ^= s << 36; h ^= s >> 28; - s = tab[b >> 40 & 0xF]; l ^= s << 40; h ^= s >> 24; - s = tab[b >> 44 & 0xF]; l ^= s << 44; h ^= s >> 20; - s = tab[b >> 48 & 0xF]; l ^= s << 48; h ^= s >> 16; - s = tab[b >> 52 & 0xF]; l ^= s << 52; h ^= s >> 12; - s = tab[b >> 56 & 0xF]; l ^= s << 56; h ^= s >> 8; - s = tab[b >> 60 ]; l ^= s << 60; h ^= s >> 4; - - /* compensate for the top three bits of a */ - - if (top3b & 01) { l ^= b << 61; h ^= b >> 3; } - if (top3b & 02) { l ^= b << 62; h ^= b >> 2; } - if (top3b & 04) { l ^= b << 63; h ^= b >> 1; } - - *r1 = h; *r0 = l; - } -#endif - -/* Product of two polynomials a, b each with degree < 2 * BN_BITS2 - 1, - * result is a polynomial r with degree < 4 * BN_BITS2 - 1 - * The caller MUST ensure that the variables have the right amount - * of space allocated. - */ -static void bn_GF2m_mul_2x2(BN_ULONG *r, const BN_ULONG a1, const BN_ULONG a0, const BN_ULONG b1, const BN_ULONG b0) - { - BN_ULONG m1, m0; - /* r[3] = h1, r[2] = h0; r[1] = l1; r[0] = l0 */ - bn_GF2m_mul_1x1(r+3, r+2, a1, b1); - bn_GF2m_mul_1x1(r+1, r, a0, b0); - bn_GF2m_mul_1x1(&m1, &m0, a0 ^ a1, b0 ^ b1); - /* Correction on m1 ^= l1 ^ h1; m0 ^= l0 ^ h0; */ - r[2] ^= m1 ^ r[1] ^ r[3]; /* h0 ^= m1 ^ l1 ^ h1; */ - r[1] = r[3] ^ r[2] ^ r[0] ^ m1 ^ m0; /* l1 ^= l0 ^ h0 ^ m0; */ - } - - -/* Add polynomials a and b and store result in r; r could be a or b, a and b - * could be equal; r is the bitwise XOR of a and b. - */ -int BN_GF2m_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b) - { - int i; - const BIGNUM *at, *bt; - - bn_check_top(a); - bn_check_top(b); - - if (a->top < b->top) { at = b; bt = a; } - else { at = a; bt = b; } - - if(bn_wexpand(r, at->top) == NULL) - return 0; - - for (i = 0; i < bt->top; i++) - { - r->d[i] = at->d[i] ^ bt->d[i]; - } - for (; i < at->top; i++) - { - r->d[i] = at->d[i]; - } - - r->top = at->top; - bn_correct_top(r); - - return 1; - } - - -/* Some functions allow for representation of the irreducible polynomials - * as an int[], say p. The irreducible f(t) is then of the form: - * t^p[0] + t^p[1] + ... + t^p[k] - * where m = p[0] > p[1] > ... > p[k] = 0. - */ - - -/* Performs modular reduction of a and store result in r. r could be a. */ -int BN_GF2m_mod_arr(BIGNUM *r, const BIGNUM *a, const int p[]) - { - int j, k; - int n, dN, d0, d1; - BN_ULONG zz, *z; - - bn_check_top(a); - - if (!p[0]) - { - /* reduction mod 1 => return 0 */ - BN_zero(r); - return 1; - } - - /* Since the algorithm does reduction in the r value, if a != r, copy - * the contents of a into r so we can do reduction in r. - */ - if (a != r) - { - if (!bn_wexpand(r, a->top)) return 0; - for (j = 0; j < a->top; j++) - { - r->d[j] = a->d[j]; - } - r->top = a->top; - } - z = r->d; - - /* start reduction */ - dN = p[0] / BN_BITS2; - for (j = r->top - 1; j > dN;) - { - zz = z[j]; - if (z[j] == 0) { j--; continue; } - z[j] = 0; - - for (k = 1; p[k] != 0; k++) - { - /* reducing component t^p[k] */ - n = p[0] - p[k]; - d0 = n % BN_BITS2; d1 = BN_BITS2 - d0; - n /= BN_BITS2; - z[j-n] ^= (zz>>d0); - if (d0) z[j-n-1] ^= (zz<<d1); - } - - /* reducing component t^0 */ - n = dN; - d0 = p[0] % BN_BITS2; - d1 = BN_BITS2 - d0; - z[j-n] ^= (zz >> d0); - if (d0) z[j-n-1] ^= (zz << d1); - } - - /* final round of reduction */ - while (j == dN) - { - - d0 = p[0] % BN_BITS2; - zz = z[dN] >> d0; - if (zz == 0) break; - d1 = BN_BITS2 - d0; - - /* clear up the top d1 bits */ - if (d0) - z[dN] = (z[dN] << d1) >> d1; - else - z[dN] = 0; - z[0] ^= zz; /* reduction t^0 component */ - - for (k = 1; p[k] != 0; k++) - { - BN_ULONG tmp_ulong; - - /* reducing component t^p[k]*/ - n = p[k] / BN_BITS2; - d0 = p[k] % BN_BITS2; - d1 = BN_BITS2 - d0; - z[n] ^= (zz << d0); - tmp_ulong = zz >> d1; - if (d0 && tmp_ulong) - z[n+1] ^= tmp_ulong; - } - - - } - - bn_correct_top(r); - return 1; - } - -/* Performs modular reduction of a by p and store result in r. r could be a. - * - * This function calls down to the BN_GF2m_mod_arr implementation; this wrapper - * function is only provided for convenience; for best performance, use the - * BN_GF2m_mod_arr function. - */ -int BN_GF2m_mod(BIGNUM *r, const BIGNUM *a, const BIGNUM *p) - { - int ret = 0; - const int max = BN_num_bits(p) + 1; - int *arr=NULL; - bn_check_top(a); - bn_check_top(p); - if ((arr = (int *)OPENSSL_malloc(sizeof(int) * max)) == NULL) goto err; - ret = BN_GF2m_poly2arr(p, arr, max); - if (!ret || ret > max) - { - BNerr(BN_F_BN_GF2M_MOD,BN_R_INVALID_LENGTH); - goto err; - } - ret = BN_GF2m_mod_arr(r, a, arr); - bn_check_top(r); -err: - if (arr) OPENSSL_free(arr); - return ret; - } - - -/* Compute the product of two polynomials a and b, reduce modulo p, and store - * the result in r. r could be a or b; a could be b. - */ -int BN_GF2m_mod_mul_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const int p[], BN_CTX *ctx) - { - int zlen, i, j, k, ret = 0; - BIGNUM *s; - BN_ULONG x1, x0, y1, y0, zz[4]; - - bn_check_top(a); - bn_check_top(b); - - if (a == b) - { - return BN_GF2m_mod_sqr_arr(r, a, p, ctx); - } - - BN_CTX_start(ctx); - if ((s = BN_CTX_get(ctx)) == NULL) goto err; - - zlen = a->top + b->top + 4; - if (!bn_wexpand(s, zlen)) goto err; - s->top = zlen; - - for (i = 0; i < zlen; i++) s->d[i] = 0; - - for (j = 0; j < b->top; j += 2) - { - y0 = b->d[j]; - y1 = ((j+1) == b->top) ? 0 : b->d[j+1]; - for (i = 0; i < a->top; i += 2) - { - x0 = a->d[i]; - x1 = ((i+1) == a->top) ? 0 : a->d[i+1]; - bn_GF2m_mul_2x2(zz, x1, x0, y1, y0); - for (k = 0; k < 4; k++) s->d[i+j+k] ^= zz[k]; - } - } - - bn_correct_top(s); - if (BN_GF2m_mod_arr(r, s, p)) - ret = 1; - bn_check_top(r); - -err: - BN_CTX_end(ctx); - return ret; - } - -/* Compute the product of two polynomials a and b, reduce modulo p, and store - * the result in r. r could be a or b; a could equal b. - * - * This function calls down to the BN_GF2m_mod_mul_arr implementation; this wrapper - * function is only provided for convenience; for best performance, use the - * BN_GF2m_mod_mul_arr function. - */ -int BN_GF2m_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *p, BN_CTX *ctx) - { - int ret = 0; - const int max = BN_num_bits(p) + 1; - int *arr=NULL; - bn_check_top(a); - bn_check_top(b); - bn_check_top(p); - if ((arr = (int *)OPENSSL_malloc(sizeof(int) * max)) == NULL) goto err; - ret = BN_GF2m_poly2arr(p, arr, max); - if (!ret || ret > max) - { - BNerr(BN_F_BN_GF2M_MOD_MUL,BN_R_INVALID_LENGTH); - goto err; - } - ret = BN_GF2m_mod_mul_arr(r, a, b, arr, ctx); - bn_check_top(r); -err: - if (arr) OPENSSL_free(arr); - return ret; - } - - -/* Square a, reduce the result mod p, and store it in a. r could be a. */ -int BN_GF2m_mod_sqr_arr(BIGNUM *r, const BIGNUM *a, const int p[], BN_CTX *ctx) - { - int i, ret = 0; - BIGNUM *s; - - bn_check_top(a); - BN_CTX_start(ctx); - if ((s = BN_CTX_get(ctx)) == NULL) return 0; - if (!bn_wexpand(s, 2 * a->top)) goto err; - - for (i = a->top - 1; i >= 0; i--) - { - s->d[2*i+1] = SQR1(a->d[i]); - s->d[2*i ] = SQR0(a->d[i]); - } - - s->top = 2 * a->top; - bn_correct_top(s); - if (!BN_GF2m_mod_arr(r, s, p)) goto err; - bn_check_top(r); - ret = 1; -err: - BN_CTX_end(ctx); - return ret; - } - -/* Square a, reduce the result mod p, and store it in a. r could be a. - * - * This function calls down to the BN_GF2m_mod_sqr_arr implementation; this wrapper - * function is only provided for convenience; for best performance, use the - * BN_GF2m_mod_sqr_arr function. - */ -int BN_GF2m_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx) - { - int ret = 0; - const int max = BN_num_bits(p) + 1; - int *arr=NULL; - - bn_check_top(a); - bn_check_top(p); - if ((arr = (int *)OPENSSL_malloc(sizeof(int) * max)) == NULL) goto err; - ret = BN_GF2m_poly2arr(p, arr, max); - if (!ret || ret > max) - { - BNerr(BN_F_BN_GF2M_MOD_SQR,BN_R_INVALID_LENGTH); - goto err; - } - ret = BN_GF2m_mod_sqr_arr(r, a, arr, ctx); - bn_check_top(r); -err: - if (arr) OPENSSL_free(arr); - return ret; - } - - -/* Invert a, reduce modulo p, and store the result in r. r could be a. - * Uses Modified Almost Inverse Algorithm (Algorithm 10) from - * Hankerson, D., Hernandez, J.L., and Menezes, A. "Software Implementation - * of Elliptic Curve Cryptography Over Binary Fields". - */ -int BN_GF2m_mod_inv(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx) - { - BIGNUM *b, *c, *u, *v, *tmp; - int ret = 0; - - bn_check_top(a); - bn_check_top(p); - - BN_CTX_start(ctx); - - b = BN_CTX_get(ctx); - c = BN_CTX_get(ctx); - u = BN_CTX_get(ctx); - v = BN_CTX_get(ctx); - if (v == NULL) goto err; - - if (!BN_one(b)) goto err; - if (!BN_GF2m_mod(u, a, p)) goto err; - if (!BN_copy(v, p)) goto err; - - if (BN_is_zero(u)) goto err; - - while (1) - { - while (!BN_is_odd(u)) - { - if (BN_is_zero(u)) goto err; - if (!BN_rshift1(u, u)) goto err; - if (BN_is_odd(b)) - { - if (!BN_GF2m_add(b, b, p)) goto err; - } - if (!BN_rshift1(b, b)) goto err; - } - - if (BN_abs_is_word(u, 1)) break; - - if (BN_num_bits(u) < BN_num_bits(v)) - { - tmp = u; u = v; v = tmp; - tmp = b; b = c; c = tmp; - } - - if (!BN_GF2m_add(u, u, v)) goto err; - if (!BN_GF2m_add(b, b, c)) goto err; - } - - - if (!BN_copy(r, b)) goto err; - bn_check_top(r); - ret = 1; - -err: - BN_CTX_end(ctx); - return ret; - } - -/* Invert xx, reduce modulo p, and store the result in r. r could be xx. - * - * This function calls down to the BN_GF2m_mod_inv implementation; this wrapper - * function is only provided for convenience; for best performance, use the - * BN_GF2m_mod_inv function. - */ -int BN_GF2m_mod_inv_arr(BIGNUM *r, const BIGNUM *xx, const int p[], BN_CTX *ctx) - { - BIGNUM *field; - int ret = 0; - - bn_check_top(xx); - BN_CTX_start(ctx); - if ((field = BN_CTX_get(ctx)) == NULL) goto err; - if (!BN_GF2m_arr2poly(p, field)) goto err; - - ret = BN_GF2m_mod_inv(r, xx, field, ctx); - bn_check_top(r); - -err: - BN_CTX_end(ctx); - return ret; - } - - -#ifndef OPENSSL_SUN_GF2M_DIV -/* Divide y by x, reduce modulo p, and store the result in r. r could be x - * or y, x could equal y. - */ -int BN_GF2m_mod_div(BIGNUM *r, const BIGNUM *y, const BIGNUM *x, const BIGNUM *p, BN_CTX *ctx) - { - BIGNUM *xinv = NULL; - int ret = 0; - - bn_check_top(y); - bn_check_top(x); - bn_check_top(p); - - BN_CTX_start(ctx); - xinv = BN_CTX_get(ctx); - if (xinv == NULL) goto err; - - if (!BN_GF2m_mod_inv(xinv, x, p, ctx)) goto err; - if (!BN_GF2m_mod_mul(r, y, xinv, p, ctx)) goto err; - bn_check_top(r); - ret = 1; - -err: - BN_CTX_end(ctx); - return ret; - } -#else -/* Divide y by x, reduce modulo p, and store the result in r. r could be x - * or y, x could equal y. - * Uses algorithm Modular_Division_GF(2^m) from - * Chang-Shantz, S. "From Euclid's GCD to Montgomery Multiplication to - * the Great Divide". - */ -int BN_GF2m_mod_div(BIGNUM *r, const BIGNUM *y, const BIGNUM *x, const BIGNUM *p, BN_CTX *ctx) - { - BIGNUM *a, *b, *u, *v; - int ret = 0; - - bn_check_top(y); - bn_check_top(x); - bn_check_top(p); - - BN_CTX_start(ctx); - - a = BN_CTX_get(ctx); - b = BN_CTX_get(ctx); - u = BN_CTX_get(ctx); - v = BN_CTX_get(ctx); - if (v == NULL) goto err; - - /* reduce x and y mod p */ - if (!BN_GF2m_mod(u, y, p)) goto err; - if (!BN_GF2m_mod(a, x, p)) goto err; - if (!BN_copy(b, p)) goto err; - - while (!BN_is_odd(a)) - { - if (!BN_rshift1(a, a)) goto err; - if (BN_is_odd(u)) if (!BN_GF2m_add(u, u, p)) goto err; - if (!BN_rshift1(u, u)) goto err; - } - - do - { - if (BN_GF2m_cmp(b, a) > 0) - { - if (!BN_GF2m_add(b, b, a)) goto err; - if (!BN_GF2m_add(v, v, u)) goto err; - do - { - if (!BN_rshift1(b, b)) goto err; - if (BN_is_odd(v)) if (!BN_GF2m_add(v, v, p)) goto err; - if (!BN_rshift1(v, v)) goto err; - } while (!BN_is_odd(b)); - } - else if (BN_abs_is_word(a, 1)) - break; - else - { - if (!BN_GF2m_add(a, a, b)) goto err; - if (!BN_GF2m_add(u, u, v)) goto err; - do - { - if (!BN_rshift1(a, a)) goto err; - if (BN_is_odd(u)) if (!BN_GF2m_add(u, u, p)) goto err; - if (!BN_rshift1(u, u)) goto err; - } while (!BN_is_odd(a)); - } - } while (1); - - if (!BN_copy(r, u)) goto err; - bn_check_top(r); - ret = 1; - -err: - BN_CTX_end(ctx); - return ret; - } -#endif - -/* Divide yy by xx, reduce modulo p, and store the result in r. r could be xx - * or yy, xx could equal yy. - * - * This function calls down to the BN_GF2m_mod_div implementation; this wrapper - * function is only provided for convenience; for best performance, use the - * BN_GF2m_mod_div function. - */ -int BN_GF2m_mod_div_arr(BIGNUM *r, const BIGNUM *yy, const BIGNUM *xx, const int p[], BN_CTX *ctx) - { - BIGNUM *field; - int ret = 0; - - bn_check_top(yy); - bn_check_top(xx); - - BN_CTX_start(ctx); - if ((field = BN_CTX_get(ctx)) == NULL) goto err; - if (!BN_GF2m_arr2poly(p, field)) goto err; - - ret = BN_GF2m_mod_div(r, yy, xx, field, ctx); - bn_check_top(r); - -err: - BN_CTX_end(ctx); - return ret; - } - - -/* Compute the bth power of a, reduce modulo p, and store - * the result in r. r could be a. - * Uses simple square-and-multiply algorithm A.5.1 from IEEE P1363. - */ -int BN_GF2m_mod_exp_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const int p[], BN_CTX *ctx) - { - int ret = 0, i, n; - BIGNUM *u; - - bn_check_top(a); - bn_check_top(b); - - if (BN_is_zero(b)) - return(BN_one(r)); - - if (BN_abs_is_word(b, 1)) - return (BN_copy(r, a) != NULL); - - BN_CTX_start(ctx); - if ((u = BN_CTX_get(ctx)) == NULL) goto err; - - if (!BN_GF2m_mod_arr(u, a, p)) goto err; - - n = BN_num_bits(b) - 1; - for (i = n - 1; i >= 0; i--) - { - if (!BN_GF2m_mod_sqr_arr(u, u, p, ctx)) goto err; - if (BN_is_bit_set(b, i)) - { - if (!BN_GF2m_mod_mul_arr(u, u, a, p, ctx)) goto err; - } - } - if (!BN_copy(r, u)) goto err; - bn_check_top(r); - ret = 1; -err: - BN_CTX_end(ctx); - return ret; - } - -/* Compute the bth power of a, reduce modulo p, and store - * the result in r. r could be a. - * - * This function calls down to the BN_GF2m_mod_exp_arr implementation; this wrapper - * function is only provided for convenience; for best performance, use the - * BN_GF2m_mod_exp_arr function. - */ -int BN_GF2m_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *p, BN_CTX *ctx) - { - int ret = 0; - const int max = BN_num_bits(p) + 1; - int *arr=NULL; - bn_check_top(a); - bn_check_top(b); - bn_check_top(p); - if ((arr = (int *)OPENSSL_malloc(sizeof(int) * max)) == NULL) goto err; - ret = BN_GF2m_poly2arr(p, arr, max); - if (!ret || ret > max) - { - BNerr(BN_F_BN_GF2M_MOD_EXP,BN_R_INVALID_LENGTH); - goto err; - } - ret = BN_GF2m_mod_exp_arr(r, a, b, arr, ctx); - bn_check_top(r); -err: - if (arr) OPENSSL_free(arr); - return ret; - } - -/* Compute the square root of a, reduce modulo p, and store - * the result in r. r could be a. - * Uses exponentiation as in algorithm A.4.1 from IEEE P1363. - */ -int BN_GF2m_mod_sqrt_arr(BIGNUM *r, const BIGNUM *a, const int p[], BN_CTX *ctx) - { - int ret = 0; - BIGNUM *u; - - bn_check_top(a); - - if (!p[0]) - { - /* reduction mod 1 => return 0 */ - BN_zero(r); - return 1; - } - - BN_CTX_start(ctx); - if ((u = BN_CTX_get(ctx)) == NULL) goto err; - - if (!BN_set_bit(u, p[0] - 1)) goto err; - ret = BN_GF2m_mod_exp_arr(r, a, u, p, ctx); - bn_check_top(r); - -err: - BN_CTX_end(ctx); - return ret; - } - -/* Compute the square root of a, reduce modulo p, and store - * the result in r. r could be a. - * - * This function calls down to the BN_GF2m_mod_sqrt_arr implementation; this wrapper - * function is only provided for convenience; for best performance, use the - * BN_GF2m_mod_sqrt_arr function. - */ -int BN_GF2m_mod_sqrt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx) - { - int ret = 0; - const int max = BN_num_bits(p) + 1; - int *arr=NULL; - bn_check_top(a); - bn_check_top(p); - if ((arr = (int *)OPENSSL_malloc(sizeof(int) * max)) == NULL) goto err; - ret = BN_GF2m_poly2arr(p, arr, max); - if (!ret || ret > max) - { - BNerr(BN_F_BN_GF2M_MOD_SQRT,BN_R_INVALID_LENGTH); - goto err; - } - ret = BN_GF2m_mod_sqrt_arr(r, a, arr, ctx); - bn_check_top(r); -err: - if (arr) OPENSSL_free(arr); - return ret; - } - -/* Find r such that r^2 + r = a mod p. r could be a. If no r exists returns 0. - * Uses algorithms A.4.7 and A.4.6 from IEEE P1363. - */ -int BN_GF2m_mod_solve_quad_arr(BIGNUM *r, const BIGNUM *a_, const int p[], BN_CTX *ctx) - { - int ret = 0, count = 0, j; - BIGNUM *a, *z, *rho, *w, *w2, *tmp; - - bn_check_top(a_); - - if (!p[0]) - { - /* reduction mod 1 => return 0 */ - BN_zero(r); - return 1; - } - - BN_CTX_start(ctx); - a = BN_CTX_get(ctx); - z = BN_CTX_get(ctx); - w = BN_CTX_get(ctx); - if (w == NULL) goto err; - - if (!BN_GF2m_mod_arr(a, a_, p)) goto err; - - if (BN_is_zero(a)) - { - BN_zero(r); - ret = 1; - goto err; - } - - if (p[0] & 0x1) /* m is odd */ - { - /* compute half-trace of a */ - if (!BN_copy(z, a)) goto err; - for (j = 1; j <= (p[0] - 1) / 2; j++) - { - if (!BN_GF2m_mod_sqr_arr(z, z, p, ctx)) goto err; - if (!BN_GF2m_mod_sqr_arr(z, z, p, ctx)) goto err; - if (!BN_GF2m_add(z, z, a)) goto err; - } - - } - else /* m is even */ - { - rho = BN_CTX_get(ctx); - w2 = BN_CTX_get(ctx); - tmp = BN_CTX_get(ctx); - if (tmp == NULL) goto err; - do - { - if (!BN_rand(rho, p[0], 0, 0)) goto err; - if (!BN_GF2m_mod_arr(rho, rho, p)) goto err; - BN_zero(z); - if (!BN_copy(w, rho)) goto err; - for (j = 1; j <= p[0] - 1; j++) - { - if (!BN_GF2m_mod_sqr_arr(z, z, p, ctx)) goto err; - if (!BN_GF2m_mod_sqr_arr(w2, w, p, ctx)) goto err; - if (!BN_GF2m_mod_mul_arr(tmp, w2, a, p, ctx)) goto err; - if (!BN_GF2m_add(z, z, tmp)) goto err; - if (!BN_GF2m_add(w, w2, rho)) goto err; - } - count++; - } while (BN_is_zero(w) && (count < MAX_ITERATIONS)); - if (BN_is_zero(w)) - { - BNerr(BN_F_BN_GF2M_MOD_SOLVE_QUAD_ARR,BN_R_TOO_MANY_ITERATIONS); - goto err; - } - } - - if (!BN_GF2m_mod_sqr_arr(w, z, p, ctx)) goto err; - if (!BN_GF2m_add(w, z, w)) goto err; - if (BN_GF2m_cmp(w, a)) - { - BNerr(BN_F_BN_GF2M_MOD_SOLVE_QUAD_ARR, BN_R_NO_SOLUTION); - goto err; - } - - if (!BN_copy(r, z)) goto err; - bn_check_top(r); - - ret = 1; - -err: - BN_CTX_end(ctx); - return ret; - } - -/* Find r such that r^2 + r = a mod p. r could be a. If no r exists returns 0. - * - * This function calls down to the BN_GF2m_mod_solve_quad_arr implementation; this wrapper - * function is only provided for convenience; for best performance, use the - * BN_GF2m_mod_solve_quad_arr function. - */ -int BN_GF2m_mod_solve_quad(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx) - { - int ret = 0; - const int max = BN_num_bits(p) + 1; - int *arr=NULL; - bn_check_top(a); - bn_check_top(p); - if ((arr = (int *)OPENSSL_malloc(sizeof(int) * - max)) == NULL) goto err; - ret = BN_GF2m_poly2arr(p, arr, max); - if (!ret || ret > max) - { - BNerr(BN_F_BN_GF2M_MOD_SOLVE_QUAD,BN_R_INVALID_LENGTH); - goto err; - } - ret = BN_GF2m_mod_solve_quad_arr(r, a, arr, ctx); - bn_check_top(r); -err: - if (arr) OPENSSL_free(arr); - return ret; - } - -/* Convert the bit-string representation of a polynomial - * ( \sum_{i=0}^n a_i * x^i) into an array of integers corresponding - * to the bits with non-zero coefficient. Array is terminated with -1. - * Up to max elements of the array will be filled. Return value is total - * number of array elements that would be filled if array was large enough. - */ -int BN_GF2m_poly2arr(const BIGNUM *a, int p[], int max) - { - int i, j, k = 0; - BN_ULONG mask; - - if (BN_is_zero(a)) - return 0; - - for (i = a->top - 1; i >= 0; i--) - { - if (!a->d[i]) - /* skip word if a->d[i] == 0 */ - continue; - mask = BN_TBIT; - for (j = BN_BITS2 - 1; j >= 0; j--) - { - if (a->d[i] & mask) - { - if (k < max) p[k] = BN_BITS2 * i + j; - k++; - } - mask >>= 1; - } - } - - if (k < max) { - p[k] = -1; - k++; - } - - return k; - } - -/* Convert the coefficient array representation of a polynomial to a - * bit-string. The array must be terminated by -1. - */ -int BN_GF2m_arr2poly(const int p[], BIGNUM *a) - { - int i; - - bn_check_top(a); - BN_zero(a); - for (i = 0; p[i] != -1; i++) - { - if (BN_set_bit(a, p[i]) == 0) - return 0; - } - bn_check_top(a); - - return 1; - } - diff --git a/app/openssl/crypto/bn/bn_kron.c b/app/openssl/crypto/bn/bn_kron.c deleted file mode 100644 index 740359b7..00000000 --- a/app/openssl/crypto/bn/bn_kron.c +++ /dev/null @@ -1,184 +0,0 @@ -/* crypto/bn/bn_kron.c */ -/* ==================================================================== - * Copyright (c) 1998-2000 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -#include "cryptlib.h" -#include "bn_lcl.h" - -/* least significant word */ -#define BN_lsw(n) (((n)->top == 0) ? (BN_ULONG) 0 : (n)->d[0]) - -/* Returns -2 for errors because both -1 and 0 are valid results. */ -int BN_kronecker(const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx) - { - int i; - int ret = -2; /* avoid 'uninitialized' warning */ - int err = 0; - BIGNUM *A, *B, *tmp; - /* In 'tab', only odd-indexed entries are relevant: - * For any odd BIGNUM n, - * tab[BN_lsw(n) & 7] - * is $(-1)^{(n^2-1)/8}$ (using TeX notation). - * Note that the sign of n does not matter. - */ - static const int tab[8] = {0, 1, 0, -1, 0, -1, 0, 1}; - - bn_check_top(a); - bn_check_top(b); - - BN_CTX_start(ctx); - A = BN_CTX_get(ctx); - B = BN_CTX_get(ctx); - if (B == NULL) goto end; - - err = !BN_copy(A, a); - if (err) goto end; - err = !BN_copy(B, b); - if (err) goto end; - - /* - * Kronecker symbol, imlemented according to Henri Cohen, - * "A Course in Computational Algebraic Number Theory" - * (algorithm 1.4.10). - */ - - /* Cohen's step 1: */ - - if (BN_is_zero(B)) - { - ret = BN_abs_is_word(A, 1); - goto end; - } - - /* Cohen's step 2: */ - - if (!BN_is_odd(A) && !BN_is_odd(B)) - { - ret = 0; - goto end; - } - - /* now B is non-zero */ - i = 0; - while (!BN_is_bit_set(B, i)) - i++; - err = !BN_rshift(B, B, i); - if (err) goto end; - if (i & 1) - { - /* i is odd */ - /* (thus B was even, thus A must be odd!) */ - - /* set 'ret' to $(-1)^{(A^2-1)/8}$ */ - ret = tab[BN_lsw(A) & 7]; - } - else - { - /* i is even */ - ret = 1; - } - - if (B->neg) - { - B->neg = 0; - if (A->neg) - ret = -ret; - } - - /* now B is positive and odd, so what remains to be done is - * to compute the Jacobi symbol (A/B) and multiply it by 'ret' */ - - while (1) - { - /* Cohen's step 3: */ - - /* B is positive and odd */ - - if (BN_is_zero(A)) - { - ret = BN_is_one(B) ? ret : 0; - goto end; - } - - /* now A is non-zero */ - i = 0; - while (!BN_is_bit_set(A, i)) - i++; - err = !BN_rshift(A, A, i); - if (err) goto end; - if (i & 1) - { - /* i is odd */ - /* multiply 'ret' by $(-1)^{(B^2-1)/8}$ */ - ret = ret * tab[BN_lsw(B) & 7]; - } - - /* Cohen's step 4: */ - /* multiply 'ret' by $(-1)^{(A-1)(B-1)/4}$ */ - if ((A->neg ? ~BN_lsw(A) : BN_lsw(A)) & BN_lsw(B) & 2) - ret = -ret; - - /* (A, B) := (B mod |A|, |A|) */ - err = !BN_nnmod(B, B, A, ctx); - if (err) goto end; - tmp = A; A = B; B = tmp; - tmp->neg = 0; - } -end: - BN_CTX_end(ctx); - if (err) - return -2; - else - return ret; - } diff --git a/app/openssl/crypto/bn/bn_lcl.h b/app/openssl/crypto/bn/bn_lcl.h deleted file mode 100644 index 8e5e98e3..00000000 --- a/app/openssl/crypto/bn/bn_lcl.h +++ /dev/null @@ -1,491 +0,0 @@ -/* crypto/bn/bn_lcl.h */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ -/* ==================================================================== - * Copyright (c) 1998-2000 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -#ifndef HEADER_BN_LCL_H -#define HEADER_BN_LCL_H - -#include <openssl/bn.h> - -#ifdef __cplusplus -extern "C" { -#endif - - -/* - * BN_window_bits_for_exponent_size -- macro for sliding window mod_exp functions - * - * - * For window size 'w' (w >= 2) and a random 'b' bits exponent, - * the number of multiplications is a constant plus on average - * - * 2^(w-1) + (b-w)/(w+1); - * - * here 2^(w-1) is for precomputing the table (we actually need - * entries only for windows that have the lowest bit set), and - * (b-w)/(w+1) is an approximation for the expected number of - * w-bit windows, not counting the first one. - * - * Thus we should use - * - * w >= 6 if b > 671 - * w = 5 if 671 > b > 239 - * w = 4 if 239 > b > 79 - * w = 3 if 79 > b > 23 - * w <= 2 if 23 > b - * - * (with draws in between). Very small exponents are often selected - * with low Hamming weight, so we use w = 1 for b <= 23. - */ -#if 1 -#define BN_window_bits_for_exponent_size(b) \ - ((b) > 671 ? 6 : \ - (b) > 239 ? 5 : \ - (b) > 79 ? 4 : \ - (b) > 23 ? 3 : 1) -#else -/* Old SSLeay/OpenSSL table. - * Maximum window size was 5, so this table differs for b==1024; - * but it coincides for other interesting values (b==160, b==512). - */ -#define BN_window_bits_for_exponent_size(b) \ - ((b) > 255 ? 5 : \ - (b) > 127 ? 4 : \ - (b) > 17 ? 3 : 1) -#endif - - - -/* BN_mod_exp_mont_conttime is based on the assumption that the - * L1 data cache line width of the target processor is at least - * the following value. - */ -#define MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH ( 64 ) -#define MOD_EXP_CTIME_MIN_CACHE_LINE_MASK (MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - 1) - -/* Window sizes optimized for fixed window size modular exponentiation - * algorithm (BN_mod_exp_mont_consttime). - * - * To achieve the security goals of BN_mode_exp_mont_consttime, the - * maximum size of the window must not exceed - * log_2(MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH). - * - * Window size thresholds are defined for cache line sizes of 32 and 64, - * cache line sizes where log_2(32)=5 and log_2(64)=6 respectively. A - * window size of 7 should only be used on processors that have a 128 - * byte or greater cache line size. - */ -#if MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 64 - -# define BN_window_bits_for_ctime_exponent_size(b) \ - ((b) > 937 ? 6 : \ - (b) > 306 ? 5 : \ - (b) > 89 ? 4 : \ - (b) > 22 ? 3 : 1) -# define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (6) - -#elif MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 32 - -# define BN_window_bits_for_ctime_exponent_size(b) \ - ((b) > 306 ? 5 : \ - (b) > 89 ? 4 : \ - (b) > 22 ? 3 : 1) -# define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (5) - -#endif - - -/* Pentium pro 16,16,16,32,64 */ -/* Alpha 16,16,16,16.64 */ -#define BN_MULL_SIZE_NORMAL (16) /* 32 */ -#define BN_MUL_RECURSIVE_SIZE_NORMAL (16) /* 32 less than */ -#define BN_SQR_RECURSIVE_SIZE_NORMAL (16) /* 32 */ -#define BN_MUL_LOW_RECURSIVE_SIZE_NORMAL (32) /* 32 */ -#define BN_MONT_CTX_SET_SIZE_WORD (64) /* 32 */ - -#if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) && !defined(PEDANTIC) -/* - * BN_UMULT_HIGH section. - * - * No, I'm not trying to overwhelm you when stating that the - * product of N-bit numbers is 2*N bits wide:-) No, I don't expect - * you to be impressed when I say that if the compiler doesn't - * support 2*N integer type, then you have to replace every N*N - * multiplication with 4 (N/2)*(N/2) accompanied by some shifts - * and additions which unavoidably results in severe performance - * penalties. Of course provided that the hardware is capable of - * producing 2*N result... That's when you normally start - * considering assembler implementation. However! It should be - * pointed out that some CPUs (most notably Alpha, PowerPC and - * upcoming IA-64 family:-) provide *separate* instruction - * calculating the upper half of the product placing the result - * into a general purpose register. Now *if* the compiler supports - * inline assembler, then it's not impossible to implement the - * "bignum" routines (and have the compiler optimize 'em) - * exhibiting "native" performance in C. That's what BN_UMULT_HIGH - * macro is about:-) - * - * <appro@fy.chalmers.se> - */ -# if defined(__alpha) && (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT)) -# if defined(__DECC) -# include <c_asm.h> -# define BN_UMULT_HIGH(a,b) (BN_ULONG)asm("umulh %a0,%a1,%v0",(a),(b)) -# elif defined(__GNUC__) -# define BN_UMULT_HIGH(a,b) ({ \ - register BN_ULONG ret; \ - asm ("umulh %1,%2,%0" \ - : "=r"(ret) \ - : "r"(a), "r"(b)); \ - ret; }) -# endif /* compiler */ -# elif defined(_ARCH_PPC) && defined(__64BIT__) && defined(SIXTY_FOUR_BIT_LONG) -# if defined(__GNUC__) -# define BN_UMULT_HIGH(a,b) ({ \ - register BN_ULONG ret; \ - asm ("mulhdu %0,%1,%2" \ - : "=r"(ret) \ - : "r"(a), "r"(b)); \ - ret; }) -# endif /* compiler */ -# elif (defined(__x86_64) || defined(__x86_64__)) && \ - (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT)) -# if defined(__GNUC__) -# define BN_UMULT_HIGH(a,b) ({ \ - register BN_ULONG ret,discard; \ - asm ("mulq %3" \ - : "=a"(discard),"=d"(ret) \ - : "a"(a), "g"(b) \ - : "cc"); \ - ret; }) -# define BN_UMULT_LOHI(low,high,a,b) \ - asm ("mulq %3" \ - : "=a"(low),"=d"(high) \ - : "a"(a),"g"(b) \ - : "cc"); -# endif -# elif (defined(_M_AMD64) || defined(_M_X64)) && defined(SIXTY_FOUR_BIT) -# if defined(_MSC_VER) && _MSC_VER>=1400 - unsigned __int64 __umulh (unsigned __int64 a,unsigned __int64 b); - unsigned __int64 _umul128 (unsigned __int64 a,unsigned __int64 b, - unsigned __int64 *h); -# pragma intrinsic(__umulh,_umul128) -# define BN_UMULT_HIGH(a,b) __umulh((a),(b)) -# define BN_UMULT_LOHI(low,high,a,b) ((low)=_umul128((a),(b),&(high))) -# endif -# endif /* cpu */ -#endif /* OPENSSL_NO_ASM */ - -/************************************************************* - * Using the long long type - */ -#define Lw(t) (((BN_ULONG)(t))&BN_MASK2) -#define Hw(t) (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2) - -#ifdef BN_DEBUG_RAND -#define bn_clear_top2max(a) \ - { \ - int ind = (a)->dmax - (a)->top; \ - BN_ULONG *ftl = &(a)->d[(a)->top-1]; \ - for (; ind != 0; ind--) \ - *(++ftl) = 0x0; \ - } -#else -#define bn_clear_top2max(a) -#endif - -#ifdef BN_LLONG -#define mul_add(r,a,w,c) { \ - BN_ULLONG t; \ - t=(BN_ULLONG)w * (a) + (r) + (c); \ - (r)= Lw(t); \ - (c)= Hw(t); \ - } - -#define mul(r,a,w,c) { \ - BN_ULLONG t; \ - t=(BN_ULLONG)w * (a) + (c); \ - (r)= Lw(t); \ - (c)= Hw(t); \ - } - -#define sqr(r0,r1,a) { \ - BN_ULLONG t; \ - t=(BN_ULLONG)(a)*(a); \ - (r0)=Lw(t); \ - (r1)=Hw(t); \ - } - -#elif defined(BN_UMULT_LOHI) -#define mul_add(r,a,w,c) { \ - BN_ULONG high,low,ret,tmp=(a); \ - ret = (r); \ - BN_UMULT_LOHI(low,high,w,tmp); \ - ret += (c); \ - (c) = (ret<(c))?1:0; \ - (c) += high; \ - ret += low; \ - (c) += (ret<low)?1:0; \ - (r) = ret; \ - } - -#define mul(r,a,w,c) { \ - BN_ULONG high,low,ret,ta=(a); \ - BN_UMULT_LOHI(low,high,w,ta); \ - ret = low + (c); \ - (c) = high; \ - (c) += (ret<low)?1:0; \ - (r) = ret; \ - } - -#define sqr(r0,r1,a) { \ - BN_ULONG tmp=(a); \ - BN_UMULT_LOHI(r0,r1,tmp,tmp); \ - } - -#elif defined(BN_UMULT_HIGH) -#define mul_add(r,a,w,c) { \ - BN_ULONG high,low,ret,tmp=(a); \ - ret = (r); \ - high= BN_UMULT_HIGH(w,tmp); \ - ret += (c); \ - low = (w) * tmp; \ - (c) = (ret<(c))?1:0; \ - (c) += high; \ - ret += low; \ - (c) += (ret<low)?1:0; \ - (r) = ret; \ - } - -#define mul(r,a,w,c) { \ - BN_ULONG high,low,ret,ta=(a); \ - low = (w) * ta; \ - high= BN_UMULT_HIGH(w,ta); \ - ret = low + (c); \ - (c) = high; \ - (c) += (ret<low)?1:0; \ - (r) = ret; \ - } - -#define sqr(r0,r1,a) { \ - BN_ULONG tmp=(a); \ - (r0) = tmp * tmp; \ - (r1) = BN_UMULT_HIGH(tmp,tmp); \ - } - -#else -/************************************************************* - * No long long type - */ - -#define LBITS(a) ((a)&BN_MASK2l) -#define HBITS(a) (((a)>>BN_BITS4)&BN_MASK2l) -#define L2HBITS(a) (((a)<<BN_BITS4)&BN_MASK2) - -#define LLBITS(a) ((a)&BN_MASKl) -#define LHBITS(a) (((a)>>BN_BITS2)&BN_MASKl) -#define LL2HBITS(a) ((BN_ULLONG)((a)&BN_MASKl)<<BN_BITS2) - -#define mul64(l,h,bl,bh) \ - { \ - BN_ULONG m,m1,lt,ht; \ - \ - lt=l; \ - ht=h; \ - m =(bh)*(lt); \ - lt=(bl)*(lt); \ - m1=(bl)*(ht); \ - ht =(bh)*(ht); \ - m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS((BN_ULONG)1); \ - ht+=HBITS(m); \ - m1=L2HBITS(m); \ - lt=(lt+m1)&BN_MASK2; if (lt < m1) ht++; \ - (l)=lt; \ - (h)=ht; \ - } - -#define sqr64(lo,ho,in) \ - { \ - BN_ULONG l,h,m; \ - \ - h=(in); \ - l=LBITS(h); \ - h=HBITS(h); \ - m =(l)*(h); \ - l*=l; \ - h*=h; \ - h+=(m&BN_MASK2h1)>>(BN_BITS4-1); \ - m =(m&BN_MASK2l)<<(BN_BITS4+1); \ - l=(l+m)&BN_MASK2; if (l < m) h++; \ - (lo)=l; \ - (ho)=h; \ - } - -#define mul_add(r,a,bl,bh,c) { \ - BN_ULONG l,h; \ - \ - h= (a); \ - l=LBITS(h); \ - h=HBITS(h); \ - mul64(l,h,(bl),(bh)); \ - \ - /* non-multiply part */ \ - l=(l+(c))&BN_MASK2; if (l < (c)) h++; \ - (c)=(r); \ - l=(l+(c))&BN_MASK2; if (l < (c)) h++; \ - (c)=h&BN_MASK2; \ - (r)=l; \ - } - -#define mul(r,a,bl,bh,c) { \ - BN_ULONG l,h; \ - \ - h= (a); \ - l=LBITS(h); \ - h=HBITS(h); \ - mul64(l,h,(bl),(bh)); \ - \ - /* non-multiply part */ \ - l+=(c); if ((l&BN_MASK2) < (c)) h++; \ - (c)=h&BN_MASK2; \ - (r)=l&BN_MASK2; \ - } -#endif /* !BN_LLONG */ - -void bn_mul_normal(BN_ULONG *r,BN_ULONG *a,int na,BN_ULONG *b,int nb); -void bn_mul_comba8(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b); -void bn_mul_comba4(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b); -void bn_sqr_normal(BN_ULONG *r, const BN_ULONG *a, int n, BN_ULONG *tmp); -void bn_sqr_comba8(BN_ULONG *r,const BN_ULONG *a); -void bn_sqr_comba4(BN_ULONG *r,const BN_ULONG *a); -int bn_cmp_words(const BN_ULONG *a,const BN_ULONG *b,int n); -int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b, - int cl, int dl); -void bn_mul_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2, - int dna,int dnb,BN_ULONG *t); -void bn_mul_part_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b, - int n,int tna,int tnb,BN_ULONG *t); -void bn_sqr_recursive(BN_ULONG *r,const BN_ULONG *a, int n2, BN_ULONG *t); -void bn_mul_low_normal(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b, int n); -void bn_mul_low_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2, - BN_ULONG *t); -void bn_mul_high(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,BN_ULONG *l,int n2, - BN_ULONG *t); -BN_ULONG bn_add_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, - int cl, int dl); -BN_ULONG bn_sub_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, - int cl, int dl); -int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0, int num); - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/app/openssl/crypto/bn/bn_lib.c b/app/openssl/crypto/bn/bn_lib.c deleted file mode 100644 index 5470fbe6..00000000 --- a/app/openssl/crypto/bn/bn_lib.c +++ /dev/null @@ -1,845 +0,0 @@ -/* crypto/bn/bn_lib.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#ifndef BN_DEBUG -# undef NDEBUG /* avoid conflicting definitions */ -# define NDEBUG -#endif - -#include <assert.h> -#include <limits.h> -#include <stdio.h> -#include "cryptlib.h" -#include "bn_lcl.h" - -const char BN_version[]="Big Number" OPENSSL_VERSION_PTEXT; - -/* This stuff appears to be completely unused, so is deprecated */ -#ifndef OPENSSL_NO_DEPRECATED -/* For a 32 bit machine - * 2 - 4 == 128 - * 3 - 8 == 256 - * 4 - 16 == 512 - * 5 - 32 == 1024 - * 6 - 64 == 2048 - * 7 - 128 == 4096 - * 8 - 256 == 8192 - */ -static int bn_limit_bits=0; -static int bn_limit_num=8; /* (1<<bn_limit_bits) */ -static int bn_limit_bits_low=0; -static int bn_limit_num_low=8; /* (1<<bn_limit_bits_low) */ -static int bn_limit_bits_high=0; -static int bn_limit_num_high=8; /* (1<<bn_limit_bits_high) */ -static int bn_limit_bits_mont=0; -static int bn_limit_num_mont=8; /* (1<<bn_limit_bits_mont) */ - -void BN_set_params(int mult, int high, int low, int mont) - { - if (mult >= 0) - { - if (mult > (int)(sizeof(int)*8)-1) - mult=sizeof(int)*8-1; - bn_limit_bits=mult; - bn_limit_num=1<<mult; - } - if (high >= 0) - { - if (high > (int)(sizeof(int)*8)-1) - high=sizeof(int)*8-1; - bn_limit_bits_high=high; - bn_limit_num_high=1<<high; - } - if (low >= 0) - { - if (low > (int)(sizeof(int)*8)-1) - low=sizeof(int)*8-1; - bn_limit_bits_low=low; - bn_limit_num_low=1<<low; - } - if (mont >= 0) - { - if (mont > (int)(sizeof(int)*8)-1) - mont=sizeof(int)*8-1; - bn_limit_bits_mont=mont; - bn_limit_num_mont=1<<mont; - } - } - -int BN_get_params(int which) - { - if (which == 0) return(bn_limit_bits); - else if (which == 1) return(bn_limit_bits_high); - else if (which == 2) return(bn_limit_bits_low); - else if (which == 3) return(bn_limit_bits_mont); - else return(0); - } -#endif - -const BIGNUM *BN_value_one(void) - { - static const BN_ULONG data_one=1L; - static const BIGNUM const_one={(BN_ULONG *)&data_one,1,1,0,BN_FLG_STATIC_DATA}; - - return(&const_one); - } - -char *BN_options(void) - { - static int init=0; - static char data[16]; - - if (!init) - { - init++; -#ifdef BN_LLONG - BIO_snprintf(data,sizeof data,"bn(%d,%d)", - (int)sizeof(BN_ULLONG)*8,(int)sizeof(BN_ULONG)*8); -#else - BIO_snprintf(data,sizeof data,"bn(%d,%d)", - (int)sizeof(BN_ULONG)*8,(int)sizeof(BN_ULONG)*8); -#endif - } - return(data); - } - -int BN_num_bits_word(BN_ULONG l) - { - static const unsigned char bits[256]={ - 0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4, - 5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5, - 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6, - 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6, - 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, - 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, - 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, - 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - }; - -#if defined(SIXTY_FOUR_BIT_LONG) - if (l & 0xffffffff00000000L) - { - if (l & 0xffff000000000000L) - { - if (l & 0xff00000000000000L) - { - return(bits[(int)(l>>56)]+56); - } - else return(bits[(int)(l>>48)]+48); - } - else - { - if (l & 0x0000ff0000000000L) - { - return(bits[(int)(l>>40)]+40); - } - else return(bits[(int)(l>>32)]+32); - } - } - else -#else -#ifdef SIXTY_FOUR_BIT - if (l & 0xffffffff00000000LL) - { - if (l & 0xffff000000000000LL) - { - if (l & 0xff00000000000000LL) - { - return(bits[(int)(l>>56)]+56); - } - else return(bits[(int)(l>>48)]+48); - } - else - { - if (l & 0x0000ff0000000000LL) - { - return(bits[(int)(l>>40)]+40); - } - else return(bits[(int)(l>>32)]+32); - } - } - else -#endif -#endif - { -#if defined(THIRTY_TWO_BIT) || defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG) - if (l & 0xffff0000L) - { - if (l & 0xff000000L) - return(bits[(int)(l>>24L)]+24); - else return(bits[(int)(l>>16L)]+16); - } - else -#endif - { -#if defined(THIRTY_TWO_BIT) || defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG) - if (l & 0xff00L) - return(bits[(int)(l>>8)]+8); - else -#endif - return(bits[(int)(l )] ); - } - } - } - -int BN_num_bits(const BIGNUM *a) - { - int i = a->top - 1; - bn_check_top(a); - - if (BN_is_zero(a)) return 0; - return ((i*BN_BITS2) + BN_num_bits_word(a->d[i])); - } - -void BN_clear_free(BIGNUM *a) - { - int i; - - if (a == NULL) return; - bn_check_top(a); - if (a->d != NULL) - { - OPENSSL_cleanse(a->d,a->dmax*sizeof(a->d[0])); - if (!(BN_get_flags(a,BN_FLG_STATIC_DATA))) - OPENSSL_free(a->d); - } - i=BN_get_flags(a,BN_FLG_MALLOCED); - OPENSSL_cleanse(a,sizeof(BIGNUM)); - if (i) - OPENSSL_free(a); - } - -void BN_free(BIGNUM *a) - { - if (a == NULL) return; - bn_check_top(a); - if ((a->d != NULL) && !(BN_get_flags(a,BN_FLG_STATIC_DATA))) - OPENSSL_free(a->d); - if (a->flags & BN_FLG_MALLOCED) - OPENSSL_free(a); - else - { -#ifndef OPENSSL_NO_DEPRECATED - a->flags|=BN_FLG_FREE; -#endif - a->d = NULL; - } - } - -void BN_init(BIGNUM *a) - { - memset(a,0,sizeof(BIGNUM)); - bn_check_top(a); - } - -BIGNUM *BN_new(void) - { - BIGNUM *ret; - - if ((ret=(BIGNUM *)OPENSSL_malloc(sizeof(BIGNUM))) == NULL) - { - BNerr(BN_F_BN_NEW,ERR_R_MALLOC_FAILURE); - return(NULL); - } - ret->flags=BN_FLG_MALLOCED; - ret->top=0; - ret->neg=0; - ret->dmax=0; - ret->d=NULL; - bn_check_top(ret); - return(ret); - } - -/* This is used both by bn_expand2() and bn_dup_expand() */ -/* The caller MUST check that words > b->dmax before calling this */ -static BN_ULONG *bn_expand_internal(const BIGNUM *b, int words) - { - BN_ULONG *A,*a = NULL; - const BN_ULONG *B; - int i; - - bn_check_top(b); - - if (words > (INT_MAX/(4*BN_BITS2))) - { - BNerr(BN_F_BN_EXPAND_INTERNAL,BN_R_BIGNUM_TOO_LONG); - return NULL; - } - if (BN_get_flags(b,BN_FLG_STATIC_DATA)) - { - BNerr(BN_F_BN_EXPAND_INTERNAL,BN_R_EXPAND_ON_STATIC_BIGNUM_DATA); - return(NULL); - } - a=A=(BN_ULONG *)OPENSSL_malloc(sizeof(BN_ULONG)*words); - if (A == NULL) - { - BNerr(BN_F_BN_EXPAND_INTERNAL,ERR_R_MALLOC_FAILURE); - return(NULL); - } -#if 1 - B=b->d; - /* Check if the previous number needs to be copied */ - if (B != NULL) - { - for (i=b->top>>2; i>0; i--,A+=4,B+=4) - { - /* - * The fact that the loop is unrolled - * 4-wise is a tribute to Intel. It's - * the one that doesn't have enough - * registers to accomodate more data. - * I'd unroll it 8-wise otherwise:-) - * - * <appro@fy.chalmers.se> - */ - BN_ULONG a0,a1,a2,a3; - a0=B[0]; a1=B[1]; a2=B[2]; a3=B[3]; - A[0]=a0; A[1]=a1; A[2]=a2; A[3]=a3; - } - switch (b->top&3) - { - case 3: A[2]=B[2]; - case 2: A[1]=B[1]; - case 1: A[0]=B[0]; - case 0: /* workaround for ultrix cc: without 'case 0', the optimizer does - * the switch table by doing a=top&3; a--; goto jump_table[a]; - * which fails for top== 0 */ - ; - } - } - -#else - memset(A,0,sizeof(BN_ULONG)*words); - memcpy(A,b->d,sizeof(b->d[0])*b->top); -#endif - - return(a); - } - -/* This is an internal function that can be used instead of bn_expand2() - * when there is a need to copy BIGNUMs instead of only expanding the - * data part, while still expanding them. - * Especially useful when needing to expand BIGNUMs that are declared - * 'const' and should therefore not be changed. - * The reason to use this instead of a BN_dup() followed by a bn_expand2() - * is memory allocation overhead. A BN_dup() followed by a bn_expand2() - * will allocate new memory for the BIGNUM data twice, and free it once, - * while bn_dup_expand() makes sure allocation is made only once. - */ - -#ifndef OPENSSL_NO_DEPRECATED -BIGNUM *bn_dup_expand(const BIGNUM *b, int words) - { - BIGNUM *r = NULL; - - bn_check_top(b); - - /* This function does not work if - * words <= b->dmax && top < words - * because BN_dup() does not preserve 'dmax'! - * (But bn_dup_expand() is not used anywhere yet.) - */ - - if (words > b->dmax) - { - BN_ULONG *a = bn_expand_internal(b, words); - - if (a) - { - r = BN_new(); - if (r) - { - r->top = b->top; - r->dmax = words; - r->neg = b->neg; - r->d = a; - } - else - { - /* r == NULL, BN_new failure */ - OPENSSL_free(a); - } - } - /* If a == NULL, there was an error in allocation in - bn_expand_internal(), and NULL should be returned */ - } - else - { - r = BN_dup(b); - } - - bn_check_top(r); - return r; - } -#endif - -/* This is an internal function that should not be used in applications. - * It ensures that 'b' has enough room for a 'words' word number - * and initialises any unused part of b->d with leading zeros. - * It is mostly used by the various BIGNUM routines. If there is an error, - * NULL is returned. If not, 'b' is returned. */ - -BIGNUM *bn_expand2(BIGNUM *b, int words) - { - bn_check_top(b); - - if (words > b->dmax) - { - BN_ULONG *a = bn_expand_internal(b, words); - if(!a) return NULL; - if(b->d) OPENSSL_free(b->d); - b->d=a; - b->dmax=words; - } - -/* None of this should be necessary because of what b->top means! */ -#if 0 - /* NB: bn_wexpand() calls this only if the BIGNUM really has to grow */ - if (b->top < b->dmax) - { - int i; - BN_ULONG *A = &(b->d[b->top]); - for (i=(b->dmax - b->top)>>3; i>0; i--,A+=8) - { - A[0]=0; A[1]=0; A[2]=0; A[3]=0; - A[4]=0; A[5]=0; A[6]=0; A[7]=0; - } - for (i=(b->dmax - b->top)&7; i>0; i--,A++) - A[0]=0; - assert(A == &(b->d[b->dmax])); - } -#endif - bn_check_top(b); - return b; - } - -BIGNUM *BN_dup(const BIGNUM *a) - { - BIGNUM *t; - - if (a == NULL) return NULL; - bn_check_top(a); - - t = BN_new(); - if (t == NULL) return NULL; - if(!BN_copy(t, a)) - { - BN_free(t); - return NULL; - } - bn_check_top(t); - return t; - } - -BIGNUM *BN_copy(BIGNUM *a, const BIGNUM *b) - { - int i; - BN_ULONG *A; - const BN_ULONG *B; - - bn_check_top(b); - - if (a == b) return(a); - if (bn_wexpand(a,b->top) == NULL) return(NULL); - -#if 1 - A=a->d; - B=b->d; - for (i=b->top>>2; i>0; i--,A+=4,B+=4) - { - BN_ULONG a0,a1,a2,a3; - a0=B[0]; a1=B[1]; a2=B[2]; a3=B[3]; - A[0]=a0; A[1]=a1; A[2]=a2; A[3]=a3; - } - switch (b->top&3) - { - case 3: A[2]=B[2]; - case 2: A[1]=B[1]; - case 1: A[0]=B[0]; - case 0: ; /* ultrix cc workaround, see comments in bn_expand_internal */ - } -#else - memcpy(a->d,b->d,sizeof(b->d[0])*b->top); -#endif - - a->top=b->top; - a->neg=b->neg; - bn_check_top(a); - return(a); - } - -void BN_swap(BIGNUM *a, BIGNUM *b) - { - int flags_old_a, flags_old_b; - BN_ULONG *tmp_d; - int tmp_top, tmp_dmax, tmp_neg; - - bn_check_top(a); - bn_check_top(b); - - flags_old_a = a->flags; - flags_old_b = b->flags; - - tmp_d = a->d; - tmp_top = a->top; - tmp_dmax = a->dmax; - tmp_neg = a->neg; - - a->d = b->d; - a->top = b->top; - a->dmax = b->dmax; - a->neg = b->neg; - - b->d = tmp_d; - b->top = tmp_top; - b->dmax = tmp_dmax; - b->neg = tmp_neg; - - a->flags = (flags_old_a & BN_FLG_MALLOCED) | (flags_old_b & BN_FLG_STATIC_DATA); - b->flags = (flags_old_b & BN_FLG_MALLOCED) | (flags_old_a & BN_FLG_STATIC_DATA); - bn_check_top(a); - bn_check_top(b); - } - -void BN_clear(BIGNUM *a) - { - bn_check_top(a); - if (a->d != NULL) - memset(a->d,0,a->dmax*sizeof(a->d[0])); - a->top=0; - a->neg=0; - } - -BN_ULONG BN_get_word(const BIGNUM *a) - { - if (a->top > 1) - return BN_MASK2; - else if (a->top == 1) - return a->d[0]; - /* a->top == 0 */ - return 0; - } - -int BN_set_word(BIGNUM *a, BN_ULONG w) - { - bn_check_top(a); - if (bn_expand(a,(int)sizeof(BN_ULONG)*8) == NULL) return(0); - a->neg = 0; - a->d[0] = w; - a->top = (w ? 1 : 0); - bn_check_top(a); - return(1); - } - -BIGNUM *BN_bin2bn(const unsigned char *s, int len, BIGNUM *ret) - { - unsigned int i,m; - unsigned int n; - BN_ULONG l; - BIGNUM *bn = NULL; - - if (ret == NULL) - ret = bn = BN_new(); - if (ret == NULL) return(NULL); - bn_check_top(ret); - l=0; - n=len; - if (n == 0) - { - ret->top=0; - return(ret); - } - i=((n-1)/BN_BYTES)+1; - m=((n-1)%(BN_BYTES)); - if (bn_wexpand(ret, (int)i) == NULL) - { - if (bn) BN_free(bn); - return NULL; - } - ret->top=i; - ret->neg=0; - while (n--) - { - l=(l<<8L)| *(s++); - if (m-- == 0) - { - ret->d[--i]=l; - l=0; - m=BN_BYTES-1; - } - } - /* need to call this due to clear byte at top if avoiding - * having the top bit set (-ve number) */ - bn_correct_top(ret); - return(ret); - } - -/* ignore negative */ -int BN_bn2bin(const BIGNUM *a, unsigned char *to) - { - int n,i; - BN_ULONG l; - - bn_check_top(a); - n=i=BN_num_bytes(a); - while (i--) - { - l=a->d[i/BN_BYTES]; - *(to++)=(unsigned char)(l>>(8*(i%BN_BYTES)))&0xff; - } - return(n); - } - -int BN_ucmp(const BIGNUM *a, const BIGNUM *b) - { - int i; - BN_ULONG t1,t2,*ap,*bp; - - bn_check_top(a); - bn_check_top(b); - - i=a->top-b->top; - if (i != 0) return(i); - ap=a->d; - bp=b->d; - for (i=a->top-1; i>=0; i--) - { - t1= ap[i]; - t2= bp[i]; - if (t1 != t2) - return((t1 > t2) ? 1 : -1); - } - return(0); - } - -int BN_cmp(const BIGNUM *a, const BIGNUM *b) - { - int i; - int gt,lt; - BN_ULONG t1,t2; - - if ((a == NULL) || (b == NULL)) - { - if (a != NULL) - return(-1); - else if (b != NULL) - return(1); - else - return(0); - } - - bn_check_top(a); - bn_check_top(b); - - if (a->neg != b->neg) - { - if (a->neg) - return(-1); - else return(1); - } - if (a->neg == 0) - { gt=1; lt= -1; } - else { gt= -1; lt=1; } - - if (a->top > b->top) return(gt); - if (a->top < b->top) return(lt); - for (i=a->top-1; i>=0; i--) - { - t1=a->d[i]; - t2=b->d[i]; - if (t1 > t2) return(gt); - if (t1 < t2) return(lt); - } - return(0); - } - -int BN_set_bit(BIGNUM *a, int n) - { - int i,j,k; - - if (n < 0) - return 0; - - i=n/BN_BITS2; - j=n%BN_BITS2; - if (a->top <= i) - { - if (bn_wexpand(a,i+1) == NULL) return(0); - for(k=a->top; k<i+1; k++) - a->d[k]=0; - a->top=i+1; - } - - a->d[i]|=(((BN_ULONG)1)<<j); - bn_check_top(a); - return(1); - } - -int BN_clear_bit(BIGNUM *a, int n) - { - int i,j; - - bn_check_top(a); - if (n < 0) return 0; - - i=n/BN_BITS2; - j=n%BN_BITS2; - if (a->top <= i) return(0); - - a->d[i]&=(~(((BN_ULONG)1)<<j)); - bn_correct_top(a); - return(1); - } - -int BN_is_bit_set(const BIGNUM *a, int n) - { - int i,j; - - bn_check_top(a); - if (n < 0) return 0; - i=n/BN_BITS2; - j=n%BN_BITS2; - if (a->top <= i) return 0; - return (int)(((a->d[i])>>j)&((BN_ULONG)1)); - } - -int BN_mask_bits(BIGNUM *a, int n) - { - int b,w; - - bn_check_top(a); - if (n < 0) return 0; - - w=n/BN_BITS2; - b=n%BN_BITS2; - if (w >= a->top) return 0; - if (b == 0) - a->top=w; - else - { - a->top=w+1; - a->d[w]&= ~(BN_MASK2<<b); - } - bn_correct_top(a); - return(1); - } - -void BN_set_negative(BIGNUM *a, int b) - { - if (b && !BN_is_zero(a)) - a->neg = 1; - else - a->neg = 0; - } - -int bn_cmp_words(const BN_ULONG *a, const BN_ULONG *b, int n) - { - int i; - BN_ULONG aa,bb; - - aa=a[n-1]; - bb=b[n-1]; - if (aa != bb) return((aa > bb)?1:-1); - for (i=n-2; i>=0; i--) - { - aa=a[i]; - bb=b[i]; - if (aa != bb) return((aa > bb)?1:-1); - } - return(0); - } - -/* Here follows a specialised variants of bn_cmp_words(). It has the - property of performing the operation on arrays of different sizes. - The sizes of those arrays is expressed through cl, which is the - common length ( basicall, min(len(a),len(b)) ), and dl, which is the - delta between the two lengths, calculated as len(a)-len(b). - All lengths are the number of BN_ULONGs... */ - -int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b, - int cl, int dl) - { - int n,i; - n = cl-1; - - if (dl < 0) - { - for (i=dl; i<0; i++) - { - if (b[n-i] != 0) - return -1; /* a < b */ - } - } - if (dl > 0) - { - for (i=dl; i>0; i--) - { - if (a[n+i] != 0) - return 1; /* a > b */ - } - } - return bn_cmp_words(a,b,cl); - } diff --git a/app/openssl/crypto/bn/bn_mod.c b/app/openssl/crypto/bn/bn_mod.c deleted file mode 100644 index 77d6ddb9..00000000 --- a/app/openssl/crypto/bn/bn_mod.c +++ /dev/null @@ -1,301 +0,0 @@ -/* crypto/bn/bn_mod.c */ -/* Includes code written by Lenka Fibikova <fibikova@exp-math.uni-essen.de> - * for the OpenSSL project. */ -/* ==================================================================== - * Copyright (c) 1998-2000 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include "cryptlib.h" -#include "bn_lcl.h" - - -#if 0 /* now just a #define */ -int BN_mod(BIGNUM *rem, const BIGNUM *m, const BIGNUM *d, BN_CTX *ctx) - { - return(BN_div(NULL,rem,m,d,ctx)); - /* note that rem->neg == m->neg (unless the remainder is zero) */ - } -#endif - - -int BN_nnmod(BIGNUM *r, const BIGNUM *m, const BIGNUM *d, BN_CTX *ctx) - { - /* like BN_mod, but returns non-negative remainder - * (i.e., 0 <= r < |d| always holds) */ - - if (!(BN_mod(r,m,d,ctx))) - return 0; - if (!r->neg) - return 1; - /* now -|d| < r < 0, so we have to set r := r + |d| */ - return (d->neg ? BN_sub : BN_add)(r, r, d); -} - - -int BN_mod_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m, BN_CTX *ctx) - { - if (!BN_add(r, a, b)) return 0; - return BN_nnmod(r, r, m, ctx); - } - - -/* BN_mod_add variant that may be used if both a and b are non-negative - * and less than m */ -int BN_mod_add_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m) - { - if (!BN_uadd(r, a, b)) return 0; - if (BN_ucmp(r, m) >= 0) - return BN_usub(r, r, m); - return 1; - } - - -int BN_mod_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m, BN_CTX *ctx) - { - if (!BN_sub(r, a, b)) return 0; - return BN_nnmod(r, r, m, ctx); - } - - -/* BN_mod_sub variant that may be used if both a and b are non-negative - * and less than m */ -int BN_mod_sub_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m) - { - if (!BN_sub(r, a, b)) return 0; - if (r->neg) - return BN_add(r, r, m); - return 1; - } - - -/* slow but works */ -int BN_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m, - BN_CTX *ctx) - { - BIGNUM *t; - int ret=0; - - bn_check_top(a); - bn_check_top(b); - bn_check_top(m); - - BN_CTX_start(ctx); - if ((t = BN_CTX_get(ctx)) == NULL) goto err; - if (a == b) - { if (!BN_sqr(t,a,ctx)) goto err; } - else - { if (!BN_mul(t,a,b,ctx)) goto err; } - if (!BN_nnmod(r,t,m,ctx)) goto err; - bn_check_top(r); - ret=1; -err: - BN_CTX_end(ctx); - return(ret); - } - - -int BN_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx) - { - if (!BN_sqr(r, a, ctx)) return 0; - /* r->neg == 0, thus we don't need BN_nnmod */ - return BN_mod(r, r, m, ctx); - } - - -int BN_mod_lshift1(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx) - { - if (!BN_lshift1(r, a)) return 0; - bn_check_top(r); - return BN_nnmod(r, r, m, ctx); - } - - -/* BN_mod_lshift1 variant that may be used if a is non-negative - * and less than m */ -int BN_mod_lshift1_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *m) - { - if (!BN_lshift1(r, a)) return 0; - bn_check_top(r); - if (BN_cmp(r, m) >= 0) - return BN_sub(r, r, m); - return 1; - } - - -int BN_mod_lshift(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m, BN_CTX *ctx) - { - BIGNUM *abs_m = NULL; - int ret; - - if (!BN_nnmod(r, a, m, ctx)) return 0; - - if (m->neg) - { - abs_m = BN_dup(m); - if (abs_m == NULL) return 0; - abs_m->neg = 0; - } - - ret = BN_mod_lshift_quick(r, r, n, (abs_m ? abs_m : m)); - bn_check_top(r); - - if (abs_m) - BN_free(abs_m); - return ret; - } - - -/* BN_mod_lshift variant that may be used if a is non-negative - * and less than m */ -int BN_mod_lshift_quick(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m) - { - if (r != a) - { - if (BN_copy(r, a) == NULL) return 0; - } - - while (n > 0) - { - int max_shift; - - /* 0 < r < m */ - max_shift = BN_num_bits(m) - BN_num_bits(r); - /* max_shift >= 0 */ - - if (max_shift < 0) - { - BNerr(BN_F_BN_MOD_LSHIFT_QUICK, BN_R_INPUT_NOT_REDUCED); - return 0; - } - - if (max_shift > n) - max_shift = n; - - if (max_shift) - { - if (!BN_lshift(r, r, max_shift)) return 0; - n -= max_shift; - } - else - { - if (!BN_lshift1(r, r)) return 0; - --n; - } - - /* BN_num_bits(r) <= BN_num_bits(m) */ - - if (BN_cmp(r, m) >= 0) - { - if (!BN_sub(r, r, m)) return 0; - } - } - bn_check_top(r); - - return 1; - } diff --git a/app/openssl/crypto/bn/bn_mont.c b/app/openssl/crypto/bn/bn_mont.c deleted file mode 100644 index 1a866880..00000000 --- a/app/openssl/crypto/bn/bn_mont.c +++ /dev/null @@ -1,567 +0,0 @@ -/* crypto/bn/bn_mont.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ -/* ==================================================================== - * Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -/* - * Details about Montgomery multiplication algorithms can be found at - * http://security.ece.orst.edu/publications.html, e.g. - * http://security.ece.orst.edu/koc/papers/j37acmon.pdf and - * sections 3.8 and 4.2 in http://security.ece.orst.edu/koc/papers/r01rsasw.pdf - */ - -#include <stdio.h> -#include "cryptlib.h" -#include "bn_lcl.h" - -#define MONT_WORD /* use the faster word-based algorithm */ - -#ifdef MONT_WORD -static int BN_from_montgomery_word(BIGNUM *ret, BIGNUM *r, BN_MONT_CTX *mont); -#endif - -int BN_mod_mul_montgomery(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, - BN_MONT_CTX *mont, BN_CTX *ctx) - { - BIGNUM *tmp; - int ret=0; -#if defined(OPENSSL_BN_ASM_MONT) && defined(MONT_WORD) - int num = mont->N.top; - - if (num>1 && a->top==num && b->top==num) - { - if (bn_wexpand(r,num) == NULL) return(0); - if (bn_mul_mont(r->d,a->d,b->d,mont->N.d,mont->n0,num)) - { - r->neg = a->neg^b->neg; - r->top = num; - bn_correct_top(r); - return(1); - } - } -#endif - - BN_CTX_start(ctx); - tmp = BN_CTX_get(ctx); - if (tmp == NULL) goto err; - - bn_check_top(tmp); - if (a == b) - { - if (!BN_sqr(tmp,a,ctx)) goto err; - } - else - { - if (!BN_mul(tmp,a,b,ctx)) goto err; - } - /* reduce from aRR to aR */ -#ifdef MONT_WORD - if (!BN_from_montgomery_word(r,tmp,mont)) goto err; -#else - if (!BN_from_montgomery(r,tmp,mont,ctx)) goto err; -#endif - bn_check_top(r); - ret=1; -err: - BN_CTX_end(ctx); - return(ret); - } - -#ifdef MONT_WORD -static int BN_from_montgomery_word(BIGNUM *ret, BIGNUM *r, BN_MONT_CTX *mont) - { - BIGNUM *n; - BN_ULONG *ap,*np,*rp,n0,v,*nrp; - int al,nl,max,i,x,ri; - - n= &(mont->N); - /* mont->ri is the size of mont->N in bits (rounded up - to the word size) */ - al=ri=mont->ri/BN_BITS2; - - nl=n->top; - if ((al == 0) || (nl == 0)) { ret->top=0; return(1); } - - max=(nl+al+1); /* allow for overflow (no?) XXX */ - if (bn_wexpand(r,max) == NULL) return(0); - - r->neg^=n->neg; - np=n->d; - rp=r->d; - nrp= &(r->d[nl]); - - /* clear the top words of T */ -#if 1 - for (i=r->top; i<max; i++) /* memset? XXX */ - r->d[i]=0; -#else - memset(&(r->d[r->top]),0,(max-r->top)*sizeof(BN_ULONG)); -#endif - - r->top=max; - n0=mont->n0[0]; - -#ifdef BN_COUNT - fprintf(stderr,"word BN_from_montgomery_word %d * %d\n",nl,nl); -#endif - for (i=0; i<nl; i++) - { -#ifdef __TANDEM - { - long long t1; - long long t2; - long long t3; - t1 = rp[0] * (n0 & 0177777); - t2 = 037777600000l; - t2 = n0 & t2; - t3 = rp[0] & 0177777; - t2 = (t3 * t2) & BN_MASK2; - t1 = t1 + t2; - v=bn_mul_add_words(rp,np,nl,(BN_ULONG) t1); - } -#else - v=bn_mul_add_words(rp,np,nl,(rp[0]*n0)&BN_MASK2); -#endif - nrp++; - rp++; - if (((nrp[-1]+=v)&BN_MASK2) >= v) - continue; - else - { - if (((++nrp[0])&BN_MASK2) != 0) continue; - if (((++nrp[1])&BN_MASK2) != 0) continue; - for (x=2; (((++nrp[x])&BN_MASK2) == 0); x++) ; - } - } - bn_correct_top(r); - - /* mont->ri will be a multiple of the word size and below code - * is kind of BN_rshift(ret,r,mont->ri) equivalent */ - if (r->top <= ri) - { - ret->top=0; - return(1); - } - al=r->top-ri; - -#define BRANCH_FREE 1 -#if BRANCH_FREE - if (bn_wexpand(ret,ri) == NULL) return(0); - x=0-(((al-ri)>>(sizeof(al)*8-1))&1); - ret->top=x=(ri&~x)|(al&x); /* min(ri,al) */ - ret->neg=r->neg; - - rp=ret->d; - ap=&(r->d[ri]); - - { - size_t m1,m2; - - v=bn_sub_words(rp,ap,np,ri); - /* this ----------------^^ works even in al<ri case - * thanks to zealous zeroing of top of the vector in the - * beginning. */ - - /* if (al==ri && !v) || al>ri) nrp=rp; else nrp=ap; */ - /* in other words if subtraction result is real, then - * trick unconditional memcpy below to perform in-place - * "refresh" instead of actual copy. */ - m1=0-(size_t)(((al-ri)>>(sizeof(al)*8-1))&1); /* al<ri */ - m2=0-(size_t)(((ri-al)>>(sizeof(al)*8-1))&1); /* al>ri */ - m1|=m2; /* (al!=ri) */ - m1|=(0-(size_t)v); /* (al!=ri || v) */ - m1&=~m2; /* (al!=ri || v) && !al>ri */ - nrp=(BN_ULONG *)(((PTR_SIZE_INT)rp&~m1)|((PTR_SIZE_INT)ap&m1)); - } - - /* 'i<ri' is chosen to eliminate dependency on input data, even - * though it results in redundant copy in al<ri case. */ - for (i=0,ri-=4; i<ri; i+=4) - { - BN_ULONG t1,t2,t3,t4; - - t1=nrp[i+0]; - t2=nrp[i+1]; - t3=nrp[i+2]; ap[i+0]=0; - t4=nrp[i+3]; ap[i+1]=0; - rp[i+0]=t1; ap[i+2]=0; - rp[i+1]=t2; ap[i+3]=0; - rp[i+2]=t3; - rp[i+3]=t4; - } - for (ri+=4; i<ri; i++) - rp[i]=nrp[i], ap[i]=0; - bn_correct_top(r); - bn_correct_top(ret); -#else - if (bn_wexpand(ret,al) == NULL) return(0); - ret->top=al; - ret->neg=r->neg; - - rp=ret->d; - ap=&(r->d[ri]); - al-=4; - for (i=0; i<al; i+=4) - { - BN_ULONG t1,t2,t3,t4; - - t1=ap[i+0]; - t2=ap[i+1]; - t3=ap[i+2]; - t4=ap[i+3]; - rp[i+0]=t1; - rp[i+1]=t2; - rp[i+2]=t3; - rp[i+3]=t4; - } - al+=4; - for (; i<al; i++) - rp[i]=ap[i]; - - if (BN_ucmp(ret, &(mont->N)) >= 0) - { - if (!BN_usub(ret,ret,&(mont->N))) return(0); - } -#endif - bn_check_top(ret); - - return(1); - } -#endif /* MONT_WORD */ - -int BN_from_montgomery(BIGNUM *ret, const BIGNUM *a, BN_MONT_CTX *mont, - BN_CTX *ctx) - { - int retn=0; -#ifdef MONT_WORD - BIGNUM *t; - - BN_CTX_start(ctx); - if ((t = BN_CTX_get(ctx)) && BN_copy(t,a)) - retn = BN_from_montgomery_word(ret,t,mont); - BN_CTX_end(ctx); -#else /* !MONT_WORD */ - BIGNUM *t1,*t2; - - BN_CTX_start(ctx); - t1 = BN_CTX_get(ctx); - t2 = BN_CTX_get(ctx); - if (t1 == NULL || t2 == NULL) goto err; - - if (!BN_copy(t1,a)) goto err; - BN_mask_bits(t1,mont->ri); - - if (!BN_mul(t2,t1,&mont->Ni,ctx)) goto err; - BN_mask_bits(t2,mont->ri); - - if (!BN_mul(t1,t2,&mont->N,ctx)) goto err; - if (!BN_add(t2,a,t1)) goto err; - if (!BN_rshift(ret,t2,mont->ri)) goto err; - - if (BN_ucmp(ret, &(mont->N)) >= 0) - { - if (!BN_usub(ret,ret,&(mont->N))) goto err; - } - retn=1; - bn_check_top(ret); - err: - BN_CTX_end(ctx); -#endif /* MONT_WORD */ - return(retn); - } - -BN_MONT_CTX *BN_MONT_CTX_new(void) - { - BN_MONT_CTX *ret; - - if ((ret=(BN_MONT_CTX *)OPENSSL_malloc(sizeof(BN_MONT_CTX))) == NULL) - return(NULL); - - BN_MONT_CTX_init(ret); - ret->flags=BN_FLG_MALLOCED; - return(ret); - } - -void BN_MONT_CTX_init(BN_MONT_CTX *ctx) - { - ctx->ri=0; - BN_init(&(ctx->RR)); - BN_init(&(ctx->N)); - BN_init(&(ctx->Ni)); - ctx->n0[0] = ctx->n0[1] = 0; - ctx->flags=0; - } - -void BN_MONT_CTX_free(BN_MONT_CTX *mont) - { - if(mont == NULL) - return; - - BN_free(&(mont->RR)); - BN_free(&(mont->N)); - BN_free(&(mont->Ni)); - if (mont->flags & BN_FLG_MALLOCED) - OPENSSL_free(mont); - } - -int BN_MONT_CTX_set(BN_MONT_CTX *mont, const BIGNUM *mod, BN_CTX *ctx) - { - int ret = 0; - BIGNUM *Ri,*R; - - BN_CTX_start(ctx); - if((Ri = BN_CTX_get(ctx)) == NULL) goto err; - R= &(mont->RR); /* grab RR as a temp */ - if (!BN_copy(&(mont->N),mod)) goto err; /* Set N */ - mont->N.neg = 0; - -#ifdef MONT_WORD - { - BIGNUM tmod; - BN_ULONG buf[2]; - - BN_init(&tmod); - tmod.d=buf; - tmod.dmax=2; - tmod.neg=0; - - mont->ri=(BN_num_bits(mod)+(BN_BITS2-1))/BN_BITS2*BN_BITS2; - -#if defined(OPENSSL_BN_ASM_MONT) && (BN_BITS2<=32) - /* Only certain BN_BITS2<=32 platforms actually make use of - * n0[1], and we could use the #else case (with a shorter R - * value) for the others. However, currently only the assembler - * files do know which is which. */ - - BN_zero(R); - if (!(BN_set_bit(R,2*BN_BITS2))) goto err; - - tmod.top=0; - if ((buf[0] = mod->d[0])) tmod.top=1; - if ((buf[1] = mod->top>1 ? mod->d[1] : 0)) tmod.top=2; - - if ((BN_mod_inverse(Ri,R,&tmod,ctx)) == NULL) - goto err; - if (!BN_lshift(Ri,Ri,2*BN_BITS2)) goto err; /* R*Ri */ - if (!BN_is_zero(Ri)) - { - if (!BN_sub_word(Ri,1)) goto err; - } - else /* if N mod word size == 1 */ - { - if (bn_expand(Ri,(int)sizeof(BN_ULONG)*2) == NULL) - goto err; - /* Ri-- (mod double word size) */ - Ri->neg=0; - Ri->d[0]=BN_MASK2; - Ri->d[1]=BN_MASK2; - Ri->top=2; - } - if (!BN_div(Ri,NULL,Ri,&tmod,ctx)) goto err; - /* Ni = (R*Ri-1)/N, - * keep only couple of least significant words: */ - mont->n0[0] = (Ri->top > 0) ? Ri->d[0] : 0; - mont->n0[1] = (Ri->top > 1) ? Ri->d[1] : 0; -#else - BN_zero(R); - if (!(BN_set_bit(R,BN_BITS2))) goto err; /* R */ - - buf[0]=mod->d[0]; /* tmod = N mod word size */ - buf[1]=0; - tmod.top = buf[0] != 0 ? 1 : 0; - /* Ri = R^-1 mod N*/ - if ((BN_mod_inverse(Ri,R,&tmod,ctx)) == NULL) - goto err; - if (!BN_lshift(Ri,Ri,BN_BITS2)) goto err; /* R*Ri */ - if (!BN_is_zero(Ri)) - { - if (!BN_sub_word(Ri,1)) goto err; - } - else /* if N mod word size == 1 */ - { - if (!BN_set_word(Ri,BN_MASK2)) goto err; /* Ri-- (mod word size) */ - } - if (!BN_div(Ri,NULL,Ri,&tmod,ctx)) goto err; - /* Ni = (R*Ri-1)/N, - * keep only least significant word: */ - mont->n0[0] = (Ri->top > 0) ? Ri->d[0] : 0; - mont->n0[1] = 0; -#endif - } -#else /* !MONT_WORD */ - { /* bignum version */ - mont->ri=BN_num_bits(&mont->N); - BN_zero(R); - if (!BN_set_bit(R,mont->ri)) goto err; /* R = 2^ri */ - /* Ri = R^-1 mod N*/ - if ((BN_mod_inverse(Ri,R,&mont->N,ctx)) == NULL) - goto err; - if (!BN_lshift(Ri,Ri,mont->ri)) goto err; /* R*Ri */ - if (!BN_sub_word(Ri,1)) goto err; - /* Ni = (R*Ri-1) / N */ - if (!BN_div(&(mont->Ni),NULL,Ri,&mont->N,ctx)) goto err; - } -#endif - - /* setup RR for conversions */ - BN_zero(&(mont->RR)); - if (!BN_set_bit(&(mont->RR),mont->ri*2)) goto err; - if (!BN_mod(&(mont->RR),&(mont->RR),&(mont->N),ctx)) goto err; - - ret = 1; -err: - BN_CTX_end(ctx); - return ret; - } - -BN_MONT_CTX *BN_MONT_CTX_copy(BN_MONT_CTX *to, BN_MONT_CTX *from) - { - if (to == from) return(to); - - if (!BN_copy(&(to->RR),&(from->RR))) return NULL; - if (!BN_copy(&(to->N),&(from->N))) return NULL; - if (!BN_copy(&(to->Ni),&(from->Ni))) return NULL; - to->ri=from->ri; - to->n0[0]=from->n0[0]; - to->n0[1]=from->n0[1]; - return(to); - } - -BN_MONT_CTX *BN_MONT_CTX_set_locked(BN_MONT_CTX **pmont, int lock, - const BIGNUM *mod, BN_CTX *ctx) - { - int got_write_lock = 0; - BN_MONT_CTX *ret; - - CRYPTO_r_lock(lock); - if (!*pmont) - { - CRYPTO_r_unlock(lock); - CRYPTO_w_lock(lock); - got_write_lock = 1; - - if (!*pmont) - { - ret = BN_MONT_CTX_new(); - if (ret && !BN_MONT_CTX_set(ret, mod, ctx)) - BN_MONT_CTX_free(ret); - else - *pmont = ret; - } - } - - ret = *pmont; - - if (got_write_lock) - CRYPTO_w_unlock(lock); - else - CRYPTO_r_unlock(lock); - - return ret; - } diff --git a/app/openssl/crypto/bn/bn_mpi.c b/app/openssl/crypto/bn/bn_mpi.c deleted file mode 100644 index a054d21a..00000000 --- a/app/openssl/crypto/bn/bn_mpi.c +++ /dev/null @@ -1,130 +0,0 @@ -/* crypto/bn/bn_mpi.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include "cryptlib.h" -#include "bn_lcl.h" - -int BN_bn2mpi(const BIGNUM *a, unsigned char *d) - { - int bits; - int num=0; - int ext=0; - long l; - - bits=BN_num_bits(a); - num=(bits+7)/8; - if (bits > 0) - { - ext=((bits & 0x07) == 0); - } - if (d == NULL) - return(num+4+ext); - - l=num+ext; - d[0]=(unsigned char)(l>>24)&0xff; - d[1]=(unsigned char)(l>>16)&0xff; - d[2]=(unsigned char)(l>> 8)&0xff; - d[3]=(unsigned char)(l )&0xff; - if (ext) d[4]=0; - num=BN_bn2bin(a,&(d[4+ext])); - if (a->neg) - d[4]|=0x80; - return(num+4+ext); - } - -BIGNUM *BN_mpi2bn(const unsigned char *d, int n, BIGNUM *a) - { - long len; - int neg=0; - - if (n < 4) - { - BNerr(BN_F_BN_MPI2BN,BN_R_INVALID_LENGTH); - return(NULL); - } - len=((long)d[0]<<24)|((long)d[1]<<16)|((int)d[2]<<8)|(int)d[3]; - if ((len+4) != n) - { - BNerr(BN_F_BN_MPI2BN,BN_R_ENCODING_ERROR); - return(NULL); - } - - if (a == NULL) a=BN_new(); - if (a == NULL) return(NULL); - - if (len == 0) - { - a->neg=0; - a->top=0; - return(a); - } - d+=4; - if ((*d) & 0x80) - neg=1; - if (BN_bin2bn(d,(int)len,a) == NULL) - return(NULL); - a->neg=neg; - if (neg) - { - BN_clear_bit(a,BN_num_bits(a)-1); - } - bn_check_top(a); - return(a); - } - diff --git a/app/openssl/crypto/bn/bn_mul.c b/app/openssl/crypto/bn/bn_mul.c deleted file mode 100644 index 12e5be80..00000000 --- a/app/openssl/crypto/bn/bn_mul.c +++ /dev/null @@ -1,1166 +0,0 @@ -/* crypto/bn/bn_mul.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#ifndef BN_DEBUG -# undef NDEBUG /* avoid conflicting definitions */ -# define NDEBUG -#endif - -#include <stdio.h> -#include <assert.h> -#include "cryptlib.h" -#include "bn_lcl.h" - -#if defined(OPENSSL_NO_ASM) || !defined(OPENSSL_BN_ASM_PART_WORDS) -/* Here follows specialised variants of bn_add_words() and - bn_sub_words(). They have the property performing operations on - arrays of different sizes. The sizes of those arrays is expressed through - cl, which is the common length ( basicall, min(len(a),len(b)) ), and dl, - which is the delta between the two lengths, calculated as len(a)-len(b). - All lengths are the number of BN_ULONGs... For the operations that require - a result array as parameter, it must have the length cl+abs(dl). - These functions should probably end up in bn_asm.c as soon as there are - assembler counterparts for the systems that use assembler files. */ - -BN_ULONG bn_sub_part_words(BN_ULONG *r, - const BN_ULONG *a, const BN_ULONG *b, - int cl, int dl) - { - BN_ULONG c, t; - - assert(cl >= 0); - c = bn_sub_words(r, a, b, cl); - - if (dl == 0) - return c; - - r += cl; - a += cl; - b += cl; - - if (dl < 0) - { -#ifdef BN_COUNT - fprintf(stderr, " bn_sub_part_words %d + %d (dl < 0, c = %d)\n", cl, dl, c); -#endif - for (;;) - { - t = b[0]; - r[0] = (0-t-c)&BN_MASK2; - if (t != 0) c=1; - if (++dl >= 0) break; - - t = b[1]; - r[1] = (0-t-c)&BN_MASK2; - if (t != 0) c=1; - if (++dl >= 0) break; - - t = b[2]; - r[2] = (0-t-c)&BN_MASK2; - if (t != 0) c=1; - if (++dl >= 0) break; - - t = b[3]; - r[3] = (0-t-c)&BN_MASK2; - if (t != 0) c=1; - if (++dl >= 0) break; - - b += 4; - r += 4; - } - } - else - { - int save_dl = dl; -#ifdef BN_COUNT - fprintf(stderr, " bn_sub_part_words %d + %d (dl > 0, c = %d)\n", cl, dl, c); -#endif - while(c) - { - t = a[0]; - r[0] = (t-c)&BN_MASK2; - if (t != 0) c=0; - if (--dl <= 0) break; - - t = a[1]; - r[1] = (t-c)&BN_MASK2; - if (t != 0) c=0; - if (--dl <= 0) break; - - t = a[2]; - r[2] = (t-c)&BN_MASK2; - if (t != 0) c=0; - if (--dl <= 0) break; - - t = a[3]; - r[3] = (t-c)&BN_MASK2; - if (t != 0) c=0; - if (--dl <= 0) break; - - save_dl = dl; - a += 4; - r += 4; - } - if (dl > 0) - { -#ifdef BN_COUNT - fprintf(stderr, " bn_sub_part_words %d + %d (dl > 0, c == 0)\n", cl, dl); -#endif - if (save_dl > dl) - { - switch (save_dl - dl) - { - case 1: - r[1] = a[1]; - if (--dl <= 0) break; - case 2: - r[2] = a[2]; - if (--dl <= 0) break; - case 3: - r[3] = a[3]; - if (--dl <= 0) break; - } - a += 4; - r += 4; - } - } - if (dl > 0) - { -#ifdef BN_COUNT - fprintf(stderr, " bn_sub_part_words %d + %d (dl > 0, copy)\n", cl, dl); -#endif - for(;;) - { - r[0] = a[0]; - if (--dl <= 0) break; - r[1] = a[1]; - if (--dl <= 0) break; - r[2] = a[2]; - if (--dl <= 0) break; - r[3] = a[3]; - if (--dl <= 0) break; - - a += 4; - r += 4; - } - } - } - return c; - } -#endif - -BN_ULONG bn_add_part_words(BN_ULONG *r, - const BN_ULONG *a, const BN_ULONG *b, - int cl, int dl) - { - BN_ULONG c, l, t; - - assert(cl >= 0); - c = bn_add_words(r, a, b, cl); - - if (dl == 0) - return c; - - r += cl; - a += cl; - b += cl; - - if (dl < 0) - { - int save_dl = dl; -#ifdef BN_COUNT - fprintf(stderr, " bn_add_part_words %d + %d (dl < 0, c = %d)\n", cl, dl, c); -#endif - while (c) - { - l=(c+b[0])&BN_MASK2; - c=(l < c); - r[0]=l; - if (++dl >= 0) break; - - l=(c+b[1])&BN_MASK2; - c=(l < c); - r[1]=l; - if (++dl >= 0) break; - - l=(c+b[2])&BN_MASK2; - c=(l < c); - r[2]=l; - if (++dl >= 0) break; - - l=(c+b[3])&BN_MASK2; - c=(l < c); - r[3]=l; - if (++dl >= 0) break; - - save_dl = dl; - b+=4; - r+=4; - } - if (dl < 0) - { -#ifdef BN_COUNT - fprintf(stderr, " bn_add_part_words %d + %d (dl < 0, c == 0)\n", cl, dl); -#endif - if (save_dl < dl) - { - switch (dl - save_dl) - { - case 1: - r[1] = b[1]; - if (++dl >= 0) break; - case 2: - r[2] = b[2]; - if (++dl >= 0) break; - case 3: - r[3] = b[3]; - if (++dl >= 0) break; - } - b += 4; - r += 4; - } - } - if (dl < 0) - { -#ifdef BN_COUNT - fprintf(stderr, " bn_add_part_words %d + %d (dl < 0, copy)\n", cl, dl); -#endif - for(;;) - { - r[0] = b[0]; - if (++dl >= 0) break; - r[1] = b[1]; - if (++dl >= 0) break; - r[2] = b[2]; - if (++dl >= 0) break; - r[3] = b[3]; - if (++dl >= 0) break; - - b += 4; - r += 4; - } - } - } - else - { - int save_dl = dl; -#ifdef BN_COUNT - fprintf(stderr, " bn_add_part_words %d + %d (dl > 0)\n", cl, dl); -#endif - while (c) - { - t=(a[0]+c)&BN_MASK2; - c=(t < c); - r[0]=t; - if (--dl <= 0) break; - - t=(a[1]+c)&BN_MASK2; - c=(t < c); - r[1]=t; - if (--dl <= 0) break; - - t=(a[2]+c)&BN_MASK2; - c=(t < c); - r[2]=t; - if (--dl <= 0) break; - - t=(a[3]+c)&BN_MASK2; - c=(t < c); - r[3]=t; - if (--dl <= 0) break; - - save_dl = dl; - a+=4; - r+=4; - } -#ifdef BN_COUNT - fprintf(stderr, " bn_add_part_words %d + %d (dl > 0, c == 0)\n", cl, dl); -#endif - if (dl > 0) - { - if (save_dl > dl) - { - switch (save_dl - dl) - { - case 1: - r[1] = a[1]; - if (--dl <= 0) break; - case 2: - r[2] = a[2]; - if (--dl <= 0) break; - case 3: - r[3] = a[3]; - if (--dl <= 0) break; - } - a += 4; - r += 4; - } - } - if (dl > 0) - { -#ifdef BN_COUNT - fprintf(stderr, " bn_add_part_words %d + %d (dl > 0, copy)\n", cl, dl); -#endif - for(;;) - { - r[0] = a[0]; - if (--dl <= 0) break; - r[1] = a[1]; - if (--dl <= 0) break; - r[2] = a[2]; - if (--dl <= 0) break; - r[3] = a[3]; - if (--dl <= 0) break; - - a += 4; - r += 4; - } - } - } - return c; - } - -#ifdef BN_RECURSION -/* Karatsuba recursive multiplication algorithm - * (cf. Knuth, The Art of Computer Programming, Vol. 2) */ - -/* r is 2*n2 words in size, - * a and b are both n2 words in size. - * n2 must be a power of 2. - * We multiply and return the result. - * t must be 2*n2 words in size - * We calculate - * a[0]*b[0] - * a[0]*b[0]+a[1]*b[1]+(a[0]-a[1])*(b[1]-b[0]) - * a[1]*b[1] - */ -/* dnX may not be positive, but n2/2+dnX has to be */ -void bn_mul_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2, - int dna, int dnb, BN_ULONG *t) - { - int n=n2/2,c1,c2; - int tna=n+dna, tnb=n+dnb; - unsigned int neg,zero; - BN_ULONG ln,lo,*p; - -# ifdef BN_COUNT - fprintf(stderr," bn_mul_recursive %d%+d * %d%+d\n",n2,dna,n2,dnb); -# endif -# ifdef BN_MUL_COMBA -# if 0 - if (n2 == 4) - { - bn_mul_comba4(r,a,b); - return; - } -# endif - /* Only call bn_mul_comba 8 if n2 == 8 and the - * two arrays are complete [steve] - */ - if (n2 == 8 && dna == 0 && dnb == 0) - { - bn_mul_comba8(r,a,b); - return; - } -# endif /* BN_MUL_COMBA */ - /* Else do normal multiply */ - if (n2 < BN_MUL_RECURSIVE_SIZE_NORMAL) - { - bn_mul_normal(r,a,n2+dna,b,n2+dnb); - if ((dna + dnb) < 0) - memset(&r[2*n2 + dna + dnb], 0, - sizeof(BN_ULONG) * -(dna + dnb)); - return; - } - /* r=(a[0]-a[1])*(b[1]-b[0]) */ - c1=bn_cmp_part_words(a,&(a[n]),tna,n-tna); - c2=bn_cmp_part_words(&(b[n]),b,tnb,tnb-n); - zero=neg=0; - switch (c1*3+c2) - { - case -4: - bn_sub_part_words(t, &(a[n]),a, tna,tna-n); /* - */ - bn_sub_part_words(&(t[n]),b, &(b[n]),tnb,n-tnb); /* - */ - break; - case -3: - zero=1; - break; - case -2: - bn_sub_part_words(t, &(a[n]),a, tna,tna-n); /* - */ - bn_sub_part_words(&(t[n]),&(b[n]),b, tnb,tnb-n); /* + */ - neg=1; - break; - case -1: - case 0: - case 1: - zero=1; - break; - case 2: - bn_sub_part_words(t, a, &(a[n]),tna,n-tna); /* + */ - bn_sub_part_words(&(t[n]),b, &(b[n]),tnb,n-tnb); /* - */ - neg=1; - break; - case 3: - zero=1; - break; - case 4: - bn_sub_part_words(t, a, &(a[n]),tna,n-tna); - bn_sub_part_words(&(t[n]),&(b[n]),b, tnb,tnb-n); - break; - } - -# ifdef BN_MUL_COMBA - if (n == 4 && dna == 0 && dnb == 0) /* XXX: bn_mul_comba4 could take - extra args to do this well */ - { - if (!zero) - bn_mul_comba4(&(t[n2]),t,&(t[n])); - else - memset(&(t[n2]),0,8*sizeof(BN_ULONG)); - - bn_mul_comba4(r,a,b); - bn_mul_comba4(&(r[n2]),&(a[n]),&(b[n])); - } - else if (n == 8 && dna == 0 && dnb == 0) /* XXX: bn_mul_comba8 could - take extra args to do this - well */ - { - if (!zero) - bn_mul_comba8(&(t[n2]),t,&(t[n])); - else - memset(&(t[n2]),0,16*sizeof(BN_ULONG)); - - bn_mul_comba8(r,a,b); - bn_mul_comba8(&(r[n2]),&(a[n]),&(b[n])); - } - else -# endif /* BN_MUL_COMBA */ - { - p= &(t[n2*2]); - if (!zero) - bn_mul_recursive(&(t[n2]),t,&(t[n]),n,0,0,p); - else - memset(&(t[n2]),0,n2*sizeof(BN_ULONG)); - bn_mul_recursive(r,a,b,n,0,0,p); - bn_mul_recursive(&(r[n2]),&(a[n]),&(b[n]),n,dna,dnb,p); - } - - /* t[32] holds (a[0]-a[1])*(b[1]-b[0]), c1 is the sign - * r[10] holds (a[0]*b[0]) - * r[32] holds (b[1]*b[1]) - */ - - c1=(int)(bn_add_words(t,r,&(r[n2]),n2)); - - if (neg) /* if t[32] is negative */ - { - c1-=(int)(bn_sub_words(&(t[n2]),t,&(t[n2]),n2)); - } - else - { - /* Might have a carry */ - c1+=(int)(bn_add_words(&(t[n2]),&(t[n2]),t,n2)); - } - - /* t[32] holds (a[0]-a[1])*(b[1]-b[0])+(a[0]*b[0])+(a[1]*b[1]) - * r[10] holds (a[0]*b[0]) - * r[32] holds (b[1]*b[1]) - * c1 holds the carry bits - */ - c1+=(int)(bn_add_words(&(r[n]),&(r[n]),&(t[n2]),n2)); - if (c1) - { - p= &(r[n+n2]); - lo= *p; - ln=(lo+c1)&BN_MASK2; - *p=ln; - - /* The overflow will stop before we over write - * words we should not overwrite */ - if (ln < (BN_ULONG)c1) - { - do { - p++; - lo= *p; - ln=(lo+1)&BN_MASK2; - *p=ln; - } while (ln == 0); - } - } - } - -/* n+tn is the word length - * t needs to be n*4 is size, as does r */ -/* tnX may not be negative but less than n */ -void bn_mul_part_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n, - int tna, int tnb, BN_ULONG *t) - { - int i,j,n2=n*2; - int c1,c2,neg; - BN_ULONG ln,lo,*p; - -# ifdef BN_COUNT - fprintf(stderr," bn_mul_part_recursive (%d%+d) * (%d%+d)\n", - n, tna, n, tnb); -# endif - if (n < 8) - { - bn_mul_normal(r,a,n+tna,b,n+tnb); - return; - } - - /* r=(a[0]-a[1])*(b[1]-b[0]) */ - c1=bn_cmp_part_words(a,&(a[n]),tna,n-tna); - c2=bn_cmp_part_words(&(b[n]),b,tnb,tnb-n); - neg=0; - switch (c1*3+c2) - { - case -4: - bn_sub_part_words(t, &(a[n]),a, tna,tna-n); /* - */ - bn_sub_part_words(&(t[n]),b, &(b[n]),tnb,n-tnb); /* - */ - break; - case -3: - /* break; */ - case -2: - bn_sub_part_words(t, &(a[n]),a, tna,tna-n); /* - */ - bn_sub_part_words(&(t[n]),&(b[n]),b, tnb,tnb-n); /* + */ - neg=1; - break; - case -1: - case 0: - case 1: - /* break; */ - case 2: - bn_sub_part_words(t, a, &(a[n]),tna,n-tna); /* + */ - bn_sub_part_words(&(t[n]),b, &(b[n]),tnb,n-tnb); /* - */ - neg=1; - break; - case 3: - /* break; */ - case 4: - bn_sub_part_words(t, a, &(a[n]),tna,n-tna); - bn_sub_part_words(&(t[n]),&(b[n]),b, tnb,tnb-n); - break; - } - /* The zero case isn't yet implemented here. The speedup - would probably be negligible. */ -# if 0 - if (n == 4) - { - bn_mul_comba4(&(t[n2]),t,&(t[n])); - bn_mul_comba4(r,a,b); - bn_mul_normal(&(r[n2]),&(a[n]),tn,&(b[n]),tn); - memset(&(r[n2+tn*2]),0,sizeof(BN_ULONG)*(n2-tn*2)); - } - else -# endif - if (n == 8) - { - bn_mul_comba8(&(t[n2]),t,&(t[n])); - bn_mul_comba8(r,a,b); - bn_mul_normal(&(r[n2]),&(a[n]),tna,&(b[n]),tnb); - memset(&(r[n2+tna+tnb]),0,sizeof(BN_ULONG)*(n2-tna-tnb)); - } - else - { - p= &(t[n2*2]); - bn_mul_recursive(&(t[n2]),t,&(t[n]),n,0,0,p); - bn_mul_recursive(r,a,b,n,0,0,p); - i=n/2; - /* If there is only a bottom half to the number, - * just do it */ - if (tna > tnb) - j = tna - i; - else - j = tnb - i; - if (j == 0) - { - bn_mul_recursive(&(r[n2]),&(a[n]),&(b[n]), - i,tna-i,tnb-i,p); - memset(&(r[n2+i*2]),0,sizeof(BN_ULONG)*(n2-i*2)); - } - else if (j > 0) /* eg, n == 16, i == 8 and tn == 11 */ - { - bn_mul_part_recursive(&(r[n2]),&(a[n]),&(b[n]), - i,tna-i,tnb-i,p); - memset(&(r[n2+tna+tnb]),0, - sizeof(BN_ULONG)*(n2-tna-tnb)); - } - else /* (j < 0) eg, n == 16, i == 8 and tn == 5 */ - { - memset(&(r[n2]),0,sizeof(BN_ULONG)*n2); - if (tna < BN_MUL_RECURSIVE_SIZE_NORMAL - && tnb < BN_MUL_RECURSIVE_SIZE_NORMAL) - { - bn_mul_normal(&(r[n2]),&(a[n]),tna,&(b[n]),tnb); - } - else - { - for (;;) - { - i/=2; - /* these simplified conditions work - * exclusively because difference - * between tna and tnb is 1 or 0 */ - if (i < tna || i < tnb) - { - bn_mul_part_recursive(&(r[n2]), - &(a[n]),&(b[n]), - i,tna-i,tnb-i,p); - break; - } - else if (i == tna || i == tnb) - { - bn_mul_recursive(&(r[n2]), - &(a[n]),&(b[n]), - i,tna-i,tnb-i,p); - break; - } - } - } - } - } - - /* t[32] holds (a[0]-a[1])*(b[1]-b[0]), c1 is the sign - * r[10] holds (a[0]*b[0]) - * r[32] holds (b[1]*b[1]) - */ - - c1=(int)(bn_add_words(t,r,&(r[n2]),n2)); - - if (neg) /* if t[32] is negative */ - { - c1-=(int)(bn_sub_words(&(t[n2]),t,&(t[n2]),n2)); - } - else - { - /* Might have a carry */ - c1+=(int)(bn_add_words(&(t[n2]),&(t[n2]),t,n2)); - } - - /* t[32] holds (a[0]-a[1])*(b[1]-b[0])+(a[0]*b[0])+(a[1]*b[1]) - * r[10] holds (a[0]*b[0]) - * r[32] holds (b[1]*b[1]) - * c1 holds the carry bits - */ - c1+=(int)(bn_add_words(&(r[n]),&(r[n]),&(t[n2]),n2)); - if (c1) - { - p= &(r[n+n2]); - lo= *p; - ln=(lo+c1)&BN_MASK2; - *p=ln; - - /* The overflow will stop before we over write - * words we should not overwrite */ - if (ln < (BN_ULONG)c1) - { - do { - p++; - lo= *p; - ln=(lo+1)&BN_MASK2; - *p=ln; - } while (ln == 0); - } - } - } - -/* a and b must be the same size, which is n2. - * r needs to be n2 words and t needs to be n2*2 - */ -void bn_mul_low_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2, - BN_ULONG *t) - { - int n=n2/2; - -# ifdef BN_COUNT - fprintf(stderr," bn_mul_low_recursive %d * %d\n",n2,n2); -# endif - - bn_mul_recursive(r,a,b,n,0,0,&(t[0])); - if (n >= BN_MUL_LOW_RECURSIVE_SIZE_NORMAL) - { - bn_mul_low_recursive(&(t[0]),&(a[0]),&(b[n]),n,&(t[n2])); - bn_add_words(&(r[n]),&(r[n]),&(t[0]),n); - bn_mul_low_recursive(&(t[0]),&(a[n]),&(b[0]),n,&(t[n2])); - bn_add_words(&(r[n]),&(r[n]),&(t[0]),n); - } - else - { - bn_mul_low_normal(&(t[0]),&(a[0]),&(b[n]),n); - bn_mul_low_normal(&(t[n]),&(a[n]),&(b[0]),n); - bn_add_words(&(r[n]),&(r[n]),&(t[0]),n); - bn_add_words(&(r[n]),&(r[n]),&(t[n]),n); - } - } - -/* a and b must be the same size, which is n2. - * r needs to be n2 words and t needs to be n2*2 - * l is the low words of the output. - * t needs to be n2*3 - */ -void bn_mul_high(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, BN_ULONG *l, int n2, - BN_ULONG *t) - { - int i,n; - int c1,c2; - int neg,oneg,zero; - BN_ULONG ll,lc,*lp,*mp; - -# ifdef BN_COUNT - fprintf(stderr," bn_mul_high %d * %d\n",n2,n2); -# endif - n=n2/2; - - /* Calculate (al-ah)*(bh-bl) */ - neg=zero=0; - c1=bn_cmp_words(&(a[0]),&(a[n]),n); - c2=bn_cmp_words(&(b[n]),&(b[0]),n); - switch (c1*3+c2) - { - case -4: - bn_sub_words(&(r[0]),&(a[n]),&(a[0]),n); - bn_sub_words(&(r[n]),&(b[0]),&(b[n]),n); - break; - case -3: - zero=1; - break; - case -2: - bn_sub_words(&(r[0]),&(a[n]),&(a[0]),n); - bn_sub_words(&(r[n]),&(b[n]),&(b[0]),n); - neg=1; - break; - case -1: - case 0: - case 1: - zero=1; - break; - case 2: - bn_sub_words(&(r[0]),&(a[0]),&(a[n]),n); - bn_sub_words(&(r[n]),&(b[0]),&(b[n]),n); - neg=1; - break; - case 3: - zero=1; - break; - case 4: - bn_sub_words(&(r[0]),&(a[0]),&(a[n]),n); - bn_sub_words(&(r[n]),&(b[n]),&(b[0]),n); - break; - } - - oneg=neg; - /* t[10] = (a[0]-a[1])*(b[1]-b[0]) */ - /* r[10] = (a[1]*b[1]) */ -# ifdef BN_MUL_COMBA - if (n == 8) - { - bn_mul_comba8(&(t[0]),&(r[0]),&(r[n])); - bn_mul_comba8(r,&(a[n]),&(b[n])); - } - else -# endif - { - bn_mul_recursive(&(t[0]),&(r[0]),&(r[n]),n,0,0,&(t[n2])); - bn_mul_recursive(r,&(a[n]),&(b[n]),n,0,0,&(t[n2])); - } - - /* s0 == low(al*bl) - * s1 == low(ah*bh)+low((al-ah)*(bh-bl))+low(al*bl)+high(al*bl) - * We know s0 and s1 so the only unknown is high(al*bl) - * high(al*bl) == s1 - low(ah*bh+s0+(al-ah)*(bh-bl)) - * high(al*bl) == s1 - (r[0]+l[0]+t[0]) - */ - if (l != NULL) - { - lp= &(t[n2+n]); - c1=(int)(bn_add_words(lp,&(r[0]),&(l[0]),n)); - } - else - { - c1=0; - lp= &(r[0]); - } - - if (neg) - neg=(int)(bn_sub_words(&(t[n2]),lp,&(t[0]),n)); - else - { - bn_add_words(&(t[n2]),lp,&(t[0]),n); - neg=0; - } - - if (l != NULL) - { - bn_sub_words(&(t[n2+n]),&(l[n]),&(t[n2]),n); - } - else - { - lp= &(t[n2+n]); - mp= &(t[n2]); - for (i=0; i<n; i++) - lp[i]=((~mp[i])+1)&BN_MASK2; - } - - /* s[0] = low(al*bl) - * t[3] = high(al*bl) - * t[10] = (a[0]-a[1])*(b[1]-b[0]) neg is the sign - * r[10] = (a[1]*b[1]) - */ - /* R[10] = al*bl - * R[21] = al*bl + ah*bh + (a[0]-a[1])*(b[1]-b[0]) - * R[32] = ah*bh - */ - /* R[1]=t[3]+l[0]+r[0](+-)t[0] (have carry/borrow) - * R[2]=r[0]+t[3]+r[1](+-)t[1] (have carry/borrow) - * R[3]=r[1]+(carry/borrow) - */ - if (l != NULL) - { - lp= &(t[n2]); - c1= (int)(bn_add_words(lp,&(t[n2+n]),&(l[0]),n)); - } - else - { - lp= &(t[n2+n]); - c1=0; - } - c1+=(int)(bn_add_words(&(t[n2]),lp, &(r[0]),n)); - if (oneg) - c1-=(int)(bn_sub_words(&(t[n2]),&(t[n2]),&(t[0]),n)); - else - c1+=(int)(bn_add_words(&(t[n2]),&(t[n2]),&(t[0]),n)); - - c2 =(int)(bn_add_words(&(r[0]),&(r[0]),&(t[n2+n]),n)); - c2+=(int)(bn_add_words(&(r[0]),&(r[0]),&(r[n]),n)); - if (oneg) - c2-=(int)(bn_sub_words(&(r[0]),&(r[0]),&(t[n]),n)); - else - c2+=(int)(bn_add_words(&(r[0]),&(r[0]),&(t[n]),n)); - - if (c1 != 0) /* Add starting at r[0], could be +ve or -ve */ - { - i=0; - if (c1 > 0) - { - lc=c1; - do { - ll=(r[i]+lc)&BN_MASK2; - r[i++]=ll; - lc=(lc > ll); - } while (lc); - } - else - { - lc= -c1; - do { - ll=r[i]; - r[i++]=(ll-lc)&BN_MASK2; - lc=(lc > ll); - } while (lc); - } - } - if (c2 != 0) /* Add starting at r[1] */ - { - i=n; - if (c2 > 0) - { - lc=c2; - do { - ll=(r[i]+lc)&BN_MASK2; - r[i++]=ll; - lc=(lc > ll); - } while (lc); - } - else - { - lc= -c2; - do { - ll=r[i]; - r[i++]=(ll-lc)&BN_MASK2; - lc=(lc > ll); - } while (lc); - } - } - } -#endif /* BN_RECURSION */ - -int BN_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx) - { - int ret=0; - int top,al,bl; - BIGNUM *rr; -#if defined(BN_MUL_COMBA) || defined(BN_RECURSION) - int i; -#endif -#ifdef BN_RECURSION - BIGNUM *t=NULL; - int j=0,k; -#endif - -#ifdef BN_COUNT - fprintf(stderr,"BN_mul %d * %d\n",a->top,b->top); -#endif - - bn_check_top(a); - bn_check_top(b); - bn_check_top(r); - - al=a->top; - bl=b->top; - - if ((al == 0) || (bl == 0)) - { - BN_zero(r); - return(1); - } - top=al+bl; - - BN_CTX_start(ctx); - if ((r == a) || (r == b)) - { - if ((rr = BN_CTX_get(ctx)) == NULL) goto err; - } - else - rr = r; - rr->neg=a->neg^b->neg; - -#if defined(BN_MUL_COMBA) || defined(BN_RECURSION) - i = al-bl; -#endif -#ifdef BN_MUL_COMBA - if (i == 0) - { -# if 0 - if (al == 4) - { - if (bn_wexpand(rr,8) == NULL) goto err; - rr->top=8; - bn_mul_comba4(rr->d,a->d,b->d); - goto end; - } -# endif - if (al == 8) - { - if (bn_wexpand(rr,16) == NULL) goto err; - rr->top=16; - bn_mul_comba8(rr->d,a->d,b->d); - goto end; - } - } -#endif /* BN_MUL_COMBA */ -#ifdef BN_RECURSION - if ((al >= BN_MULL_SIZE_NORMAL) && (bl >= BN_MULL_SIZE_NORMAL)) - { - if (i >= -1 && i <= 1) - { - /* Find out the power of two lower or equal - to the longest of the two numbers */ - if (i >= 0) - { - j = BN_num_bits_word((BN_ULONG)al); - } - if (i == -1) - { - j = BN_num_bits_word((BN_ULONG)bl); - } - j = 1<<(j-1); - assert(j <= al || j <= bl); - k = j+j; - t = BN_CTX_get(ctx); - if (t == NULL) - goto err; - if (al > j || bl > j) - { - if (bn_wexpand(t,k*4) == NULL) goto err; - if (bn_wexpand(rr,k*4) == NULL) goto err; - bn_mul_part_recursive(rr->d,a->d,b->d, - j,al-j,bl-j,t->d); - } - else /* al <= j || bl <= j */ - { - if (bn_wexpand(t,k*2) == NULL) goto err; - if (bn_wexpand(rr,k*2) == NULL) goto err; - bn_mul_recursive(rr->d,a->d,b->d, - j,al-j,bl-j,t->d); - } - rr->top=top; - goto end; - } -#if 0 - if (i == 1 && !BN_get_flags(b,BN_FLG_STATIC_DATA)) - { - BIGNUM *tmp_bn = (BIGNUM *)b; - if (bn_wexpand(tmp_bn,al) == NULL) goto err; - tmp_bn->d[bl]=0; - bl++; - i--; - } - else if (i == -1 && !BN_get_flags(a,BN_FLG_STATIC_DATA)) - { - BIGNUM *tmp_bn = (BIGNUM *)a; - if (bn_wexpand(tmp_bn,bl) == NULL) goto err; - tmp_bn->d[al]=0; - al++; - i++; - } - if (i == 0) - { - /* symmetric and > 4 */ - /* 16 or larger */ - j=BN_num_bits_word((BN_ULONG)al); - j=1<<(j-1); - k=j+j; - t = BN_CTX_get(ctx); - if (al == j) /* exact multiple */ - { - if (bn_wexpand(t,k*2) == NULL) goto err; - if (bn_wexpand(rr,k*2) == NULL) goto err; - bn_mul_recursive(rr->d,a->d,b->d,al,t->d); - } - else - { - if (bn_wexpand(t,k*4) == NULL) goto err; - if (bn_wexpand(rr,k*4) == NULL) goto err; - bn_mul_part_recursive(rr->d,a->d,b->d,al-j,j,t->d); - } - rr->top=top; - goto end; - } -#endif - } -#endif /* BN_RECURSION */ - if (bn_wexpand(rr,top) == NULL) goto err; - rr->top=top; - bn_mul_normal(rr->d,a->d,al,b->d,bl); - -#if defined(BN_MUL_COMBA) || defined(BN_RECURSION) -end: -#endif - bn_correct_top(rr); - if (r != rr) BN_copy(r,rr); - ret=1; -err: - bn_check_top(r); - BN_CTX_end(ctx); - return(ret); - } - -void bn_mul_normal(BN_ULONG *r, BN_ULONG *a, int na, BN_ULONG *b, int nb) - { - BN_ULONG *rr; - -#ifdef BN_COUNT - fprintf(stderr," bn_mul_normal %d * %d\n",na,nb); -#endif - - if (na < nb) - { - int itmp; - BN_ULONG *ltmp; - - itmp=na; na=nb; nb=itmp; - ltmp=a; a=b; b=ltmp; - - } - rr= &(r[na]); - if (nb <= 0) - { - (void)bn_mul_words(r,a,na,0); - return; - } - else - rr[0]=bn_mul_words(r,a,na,b[0]); - - for (;;) - { - if (--nb <= 0) return; - rr[1]=bn_mul_add_words(&(r[1]),a,na,b[1]); - if (--nb <= 0) return; - rr[2]=bn_mul_add_words(&(r[2]),a,na,b[2]); - if (--nb <= 0) return; - rr[3]=bn_mul_add_words(&(r[3]),a,na,b[3]); - if (--nb <= 0) return; - rr[4]=bn_mul_add_words(&(r[4]),a,na,b[4]); - rr+=4; - r+=4; - b+=4; - } - } - -void bn_mul_low_normal(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n) - { -#ifdef BN_COUNT - fprintf(stderr," bn_mul_low_normal %d * %d\n",n,n); -#endif - bn_mul_words(r,a,n,b[0]); - - for (;;) - { - if (--n <= 0) return; - bn_mul_add_words(&(r[1]),a,n,b[1]); - if (--n <= 0) return; - bn_mul_add_words(&(r[2]),a,n,b[2]); - if (--n <= 0) return; - bn_mul_add_words(&(r[3]),a,n,b[3]); - if (--n <= 0) return; - bn_mul_add_words(&(r[4]),a,n,b[4]); - r+=4; - b+=4; - } - } diff --git a/app/openssl/crypto/bn/bn_nist.c b/app/openssl/crypto/bn/bn_nist.c deleted file mode 100644 index c6de0326..00000000 --- a/app/openssl/crypto/bn/bn_nist.c +++ /dev/null @@ -1,844 +0,0 @@ -/* crypto/bn/bn_nist.c */ -/* - * Written by Nils Larsch for the OpenSSL project - */ -/* ==================================================================== - * Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -#include "bn_lcl.h" -#include "cryptlib.h" - - -#define BN_NIST_192_TOP (192+BN_BITS2-1)/BN_BITS2 -#define BN_NIST_224_TOP (224+BN_BITS2-1)/BN_BITS2 -#define BN_NIST_256_TOP (256+BN_BITS2-1)/BN_BITS2 -#define BN_NIST_384_TOP (384+BN_BITS2-1)/BN_BITS2 -#define BN_NIST_521_TOP (521+BN_BITS2-1)/BN_BITS2 - -/* pre-computed tables are "carry-less" values of modulus*(i+1) */ -#if BN_BITS2 == 64 -static const BN_ULONG _nist_p_192[][BN_NIST_192_TOP] = { - {0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFEULL,0xFFFFFFFFFFFFFFFFULL}, - {0xFFFFFFFFFFFFFFFEULL,0xFFFFFFFFFFFFFFFDULL,0xFFFFFFFFFFFFFFFFULL}, - {0xFFFFFFFFFFFFFFFDULL,0xFFFFFFFFFFFFFFFCULL,0xFFFFFFFFFFFFFFFFULL} - }; -static const BN_ULONG _nist_p_192_sqr[] = { - 0x0000000000000001ULL,0x0000000000000002ULL,0x0000000000000001ULL, - 0xFFFFFFFFFFFFFFFEULL,0xFFFFFFFFFFFFFFFDULL,0xFFFFFFFFFFFFFFFFULL - }; -static const BN_ULONG _nist_p_224[][BN_NIST_224_TOP] = { - {0x0000000000000001ULL,0xFFFFFFFF00000000ULL, - 0xFFFFFFFFFFFFFFFFULL,0x00000000FFFFFFFFULL}, - {0x0000000000000002ULL,0xFFFFFFFE00000000ULL, - 0xFFFFFFFFFFFFFFFFULL,0x00000001FFFFFFFFULL} /* this one is "carry-full" */ - }; -static const BN_ULONG _nist_p_224_sqr[] = { - 0x0000000000000001ULL,0xFFFFFFFE00000000ULL, - 0xFFFFFFFFFFFFFFFFULL,0x0000000200000000ULL, - 0x0000000000000000ULL,0xFFFFFFFFFFFFFFFEULL, - 0xFFFFFFFFFFFFFFFFULL - }; -static const BN_ULONG _nist_p_256[][BN_NIST_256_TOP] = { - {0xFFFFFFFFFFFFFFFFULL,0x00000000FFFFFFFFULL, - 0x0000000000000000ULL,0xFFFFFFFF00000001ULL}, - {0xFFFFFFFFFFFFFFFEULL,0x00000001FFFFFFFFULL, - 0x0000000000000000ULL,0xFFFFFFFE00000002ULL}, - {0xFFFFFFFFFFFFFFFDULL,0x00000002FFFFFFFFULL, - 0x0000000000000000ULL,0xFFFFFFFD00000003ULL}, - {0xFFFFFFFFFFFFFFFCULL,0x00000003FFFFFFFFULL, - 0x0000000000000000ULL,0xFFFFFFFC00000004ULL}, - {0xFFFFFFFFFFFFFFFBULL,0x00000004FFFFFFFFULL, - 0x0000000000000000ULL,0xFFFFFFFB00000005ULL}, - }; -static const BN_ULONG _nist_p_256_sqr[] = { - 0x0000000000000001ULL,0xFFFFFFFE00000000ULL, - 0xFFFFFFFFFFFFFFFFULL,0x00000001FFFFFFFEULL, - 0x00000001FFFFFFFEULL,0x00000001FFFFFFFEULL, - 0xFFFFFFFE00000001ULL,0xFFFFFFFE00000002ULL - }; -static const BN_ULONG _nist_p_384[][BN_NIST_384_TOP] = { - {0x00000000FFFFFFFFULL,0xFFFFFFFF00000000ULL,0xFFFFFFFFFFFFFFFEULL, - 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL}, - {0x00000001FFFFFFFEULL,0xFFFFFFFE00000000ULL,0xFFFFFFFFFFFFFFFDULL, - 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL}, - {0x00000002FFFFFFFDULL,0xFFFFFFFD00000000ULL,0xFFFFFFFFFFFFFFFCULL, - 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL}, - {0x00000003FFFFFFFCULL,0xFFFFFFFC00000000ULL,0xFFFFFFFFFFFFFFFBULL, - 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL}, - {0x00000004FFFFFFFBULL,0xFFFFFFFB00000000ULL,0xFFFFFFFFFFFFFFFAULL, - 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL}, - }; -static const BN_ULONG _nist_p_384_sqr[] = { - 0xFFFFFFFE00000001ULL,0x0000000200000000ULL,0xFFFFFFFE00000000ULL, - 0x0000000200000000ULL,0x0000000000000001ULL,0x0000000000000000ULL, - 0x00000001FFFFFFFEULL,0xFFFFFFFE00000000ULL,0xFFFFFFFFFFFFFFFDULL, - 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL - }; -static const BN_ULONG _nist_p_521[] = - {0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL, - 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL, - 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL, - 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL, - 0x00000000000001FFULL}; -static const BN_ULONG _nist_p_521_sqr[] = { - 0x0000000000000001ULL,0x0000000000000000ULL,0x0000000000000000ULL, - 0x0000000000000000ULL,0x0000000000000000ULL,0x0000000000000000ULL, - 0x0000000000000000ULL,0x0000000000000000ULL,0xFFFFFFFFFFFFFC00ULL, - 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL, - 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL, - 0xFFFFFFFFFFFFFFFFULL,0x000000000003FFFFULL - }; -#elif BN_BITS2 == 32 -static const BN_ULONG _nist_p_192[][BN_NIST_192_TOP] = { - {0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFE,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF}, - {0xFFFFFFFE,0xFFFFFFFF,0xFFFFFFFD,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF}, - {0xFFFFFFFD,0xFFFFFFFF,0xFFFFFFFC,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF} - }; -static const BN_ULONG _nist_p_192_sqr[] = { - 0x00000001,0x00000000,0x00000002,0x00000000,0x00000001,0x00000000, - 0xFFFFFFFE,0xFFFFFFFF,0xFFFFFFFD,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF - }; -static const BN_ULONG _nist_p_224[][BN_NIST_224_TOP] = { - {0x00000001,0x00000000,0x00000000,0xFFFFFFFF, - 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF}, - {0x00000002,0x00000000,0x00000000,0xFFFFFFFE, - 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF} - }; -static const BN_ULONG _nist_p_224_sqr[] = { - 0x00000001,0x00000000,0x00000000,0xFFFFFFFE, - 0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000002, - 0x00000000,0x00000000,0xFFFFFFFE,0xFFFFFFFF, - 0xFFFFFFFF,0xFFFFFFFF - }; -static const BN_ULONG _nist_p_256[][BN_NIST_256_TOP] = { - {0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0x00000000, - 0x00000000,0x00000000,0x00000001,0xFFFFFFFF}, - {0xFFFFFFFE,0xFFFFFFFF,0xFFFFFFFF,0x00000001, - 0x00000000,0x00000000,0x00000002,0xFFFFFFFE}, - {0xFFFFFFFD,0xFFFFFFFF,0xFFFFFFFF,0x00000002, - 0x00000000,0x00000000,0x00000003,0xFFFFFFFD}, - {0xFFFFFFFC,0xFFFFFFFF,0xFFFFFFFF,0x00000003, - 0x00000000,0x00000000,0x00000004,0xFFFFFFFC}, - {0xFFFFFFFB,0xFFFFFFFF,0xFFFFFFFF,0x00000004, - 0x00000000,0x00000000,0x00000005,0xFFFFFFFB}, - }; -static const BN_ULONG _nist_p_256_sqr[] = { - 0x00000001,0x00000000,0x00000000,0xFFFFFFFE, - 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFE,0x00000001, - 0xFFFFFFFE,0x00000001,0xFFFFFFFE,0x00000001, - 0x00000001,0xFFFFFFFE,0x00000002,0xFFFFFFFE - }; -static const BN_ULONG _nist_p_384[][BN_NIST_384_TOP] = { - {0xFFFFFFFF,0x00000000,0x00000000,0xFFFFFFFF,0xFFFFFFFE,0xFFFFFFFF, - 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF}, - {0xFFFFFFFE,0x00000001,0x00000000,0xFFFFFFFE,0xFFFFFFFD,0xFFFFFFFF, - 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF}, - {0xFFFFFFFD,0x00000002,0x00000000,0xFFFFFFFD,0xFFFFFFFC,0xFFFFFFFF, - 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF}, - {0xFFFFFFFC,0x00000003,0x00000000,0xFFFFFFFC,0xFFFFFFFB,0xFFFFFFFF, - 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF}, - {0xFFFFFFFB,0x00000004,0x00000000,0xFFFFFFFB,0xFFFFFFFA,0xFFFFFFFF, - 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF}, - }; -static const BN_ULONG _nist_p_384_sqr[] = { - 0x00000001,0xFFFFFFFE,0x00000000,0x00000002,0x00000000,0xFFFFFFFE, - 0x00000000,0x00000002,0x00000001,0x00000000,0x00000000,0x00000000, - 0xFFFFFFFE,0x00000001,0x00000000,0xFFFFFFFE,0xFFFFFFFD,0xFFFFFFFF, - 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF - }; -static const BN_ULONG _nist_p_521[] = {0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, - 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, - 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, - 0xFFFFFFFF,0x000001FF}; -static const BN_ULONG _nist_p_521_sqr[] = { - 0x00000001,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000,0xFFFFFC00,0xFFFFFFFF, - 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, - 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, - 0xFFFFFFFF,0xFFFFFFFF,0x0003FFFF - }; -#else -#error "unsupported BN_BITS2" -#endif - - -static const BIGNUM _bignum_nist_p_192 = - { - (BN_ULONG *)_nist_p_192[0], - BN_NIST_192_TOP, - BN_NIST_192_TOP, - 0, - BN_FLG_STATIC_DATA - }; - -static const BIGNUM _bignum_nist_p_224 = - { - (BN_ULONG *)_nist_p_224[0], - BN_NIST_224_TOP, - BN_NIST_224_TOP, - 0, - BN_FLG_STATIC_DATA - }; - -static const BIGNUM _bignum_nist_p_256 = - { - (BN_ULONG *)_nist_p_256[0], - BN_NIST_256_TOP, - BN_NIST_256_TOP, - 0, - BN_FLG_STATIC_DATA - }; - -static const BIGNUM _bignum_nist_p_384 = - { - (BN_ULONG *)_nist_p_384[0], - BN_NIST_384_TOP, - BN_NIST_384_TOP, - 0, - BN_FLG_STATIC_DATA - }; - -static const BIGNUM _bignum_nist_p_521 = - { - (BN_ULONG *)_nist_p_521, - BN_NIST_521_TOP, - BN_NIST_521_TOP, - 0, - BN_FLG_STATIC_DATA - }; - - -const BIGNUM *BN_get0_nist_prime_192(void) - { - return &_bignum_nist_p_192; - } - -const BIGNUM *BN_get0_nist_prime_224(void) - { - return &_bignum_nist_p_224; - } - -const BIGNUM *BN_get0_nist_prime_256(void) - { - return &_bignum_nist_p_256; - } - -const BIGNUM *BN_get0_nist_prime_384(void) - { - return &_bignum_nist_p_384; - } - -const BIGNUM *BN_get0_nist_prime_521(void) - { - return &_bignum_nist_p_521; - } - - -static void nist_cp_bn_0(BN_ULONG *buf, BN_ULONG *a, int top, int max) - { - int i; - BN_ULONG *_tmp1 = (buf), *_tmp2 = (a); - -#ifdef BN_DEBUG - OPENSSL_assert(top <= max); -#endif - for (i = (top); i != 0; i--) - *_tmp1++ = *_tmp2++; - for (i = (max) - (top); i != 0; i--) - *_tmp1++ = (BN_ULONG) 0; - } - -static void nist_cp_bn(BN_ULONG *buf, BN_ULONG *a, int top) - { - int i; - BN_ULONG *_tmp1 = (buf), *_tmp2 = (a); - for (i = (top); i != 0; i--) - *_tmp1++ = *_tmp2++; - } - -#if BN_BITS2 == 64 -#define bn_cp_64(to, n, from, m) (to)[n] = (m>=0)?((from)[m]):0; -#define bn_64_set_0(to, n) (to)[n] = (BN_ULONG)0; -/* - * two following macros are implemented under assumption that they - * are called in a sequence with *ascending* n, i.e. as they are... - */ -#define bn_cp_32_naked(to, n, from, m) (((n)&1)?(to[(n)/2]|=((m)&1)?(from[(m)/2]&BN_MASK2h):(from[(m)/2]<<32))\ - :(to[(n)/2] =((m)&1)?(from[(m)/2]>>32):(from[(m)/2]&BN_MASK2l))) -#define bn_32_set_0(to, n) (((n)&1)?(to[(n)/2]&=BN_MASK2l):(to[(n)/2]=0)); -#define bn_cp_32(to,n,from,m) ((m)>=0)?bn_cp_32_naked(to,n,from,m):bn_32_set_0(to,n) -#else -#define bn_cp_64(to, n, from, m) \ - { \ - bn_cp_32(to, (n)*2, from, (m)*2); \ - bn_cp_32(to, (n)*2+1, from, (m)*2+1); \ - } -#define bn_64_set_0(to, n) \ - { \ - bn_32_set_0(to, (n)*2); \ - bn_32_set_0(to, (n)*2+1); \ - } -#if BN_BITS2 == 32 -#define bn_cp_32(to, n, from, m) (to)[n] = (m>=0)?((from)[m]):0; -#define bn_32_set_0(to, n) (to)[n] = (BN_ULONG)0; -#endif -#endif /* BN_BITS2 != 64 */ - - -#define nist_set_192(to, from, a1, a2, a3) \ - { \ - bn_cp_64(to, 0, from, (a3) - 3) \ - bn_cp_64(to, 1, from, (a2) - 3) \ - bn_cp_64(to, 2, from, (a1) - 3) \ - } - -int BN_nist_mod_192(BIGNUM *r, const BIGNUM *a, const BIGNUM *field, - BN_CTX *ctx) - { - int top = a->top, i; - int carry; - register BN_ULONG *r_d, *a_d = a->d; - BN_ULONG t_d[BN_NIST_192_TOP], - buf[BN_NIST_192_TOP], - c_d[BN_NIST_192_TOP], - *res; - PTR_SIZE_INT mask; - static const BIGNUM _bignum_nist_p_192_sqr = { - (BN_ULONG *)_nist_p_192_sqr, - sizeof(_nist_p_192_sqr)/sizeof(_nist_p_192_sqr[0]), - sizeof(_nist_p_192_sqr)/sizeof(_nist_p_192_sqr[0]), - 0,BN_FLG_STATIC_DATA }; - - field = &_bignum_nist_p_192; /* just to make sure */ - - if (BN_is_negative(a) || BN_ucmp(a,&_bignum_nist_p_192_sqr)>=0) - return BN_nnmod(r, a, field, ctx); - - i = BN_ucmp(field, a); - if (i == 0) - { - BN_zero(r); - return 1; - } - else if (i > 0) - return (r == a) ? 1 : (BN_copy(r ,a) != NULL); - - if (r != a) - { - if (!bn_wexpand(r, BN_NIST_192_TOP)) - return 0; - r_d = r->d; - nist_cp_bn(r_d, a_d, BN_NIST_192_TOP); - } - else - r_d = a_d; - - nist_cp_bn_0(buf, a_d + BN_NIST_192_TOP, top - BN_NIST_192_TOP, BN_NIST_192_TOP); - - nist_set_192(t_d, buf, 0, 3, 3); - carry = (int)bn_add_words(r_d, r_d, t_d, BN_NIST_192_TOP); - nist_set_192(t_d, buf, 4, 4, 0); - carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_192_TOP); - nist_set_192(t_d, buf, 5, 5, 5) - carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_192_TOP); - - if (carry > 0) - carry = (int)bn_sub_words(r_d,r_d,_nist_p_192[carry-1],BN_NIST_192_TOP); - else - carry = 1; - - /* - * we need 'if (carry==0 || result>=modulus) result-=modulus;' - * as comparison implies subtraction, we can write - * 'tmp=result-modulus; if (!carry || !borrow) result=tmp;' - * this is what happens below, but without explicit if:-) a. - */ - mask = 0-(PTR_SIZE_INT)bn_sub_words(c_d,r_d,_nist_p_192[0],BN_NIST_192_TOP); - mask &= 0-(PTR_SIZE_INT)carry; - res = (BN_ULONG *) - (((PTR_SIZE_INT)c_d&~mask) | ((PTR_SIZE_INT)r_d&mask)); - nist_cp_bn(r_d, res, BN_NIST_192_TOP); - r->top = BN_NIST_192_TOP; - bn_correct_top(r); - - return 1; - } - -typedef BN_ULONG (*bn_addsub_f)(BN_ULONG *,const BN_ULONG *,const BN_ULONG *,int); - -#define nist_set_224(to, from, a1, a2, a3, a4, a5, a6, a7) \ - { \ - bn_cp_32(to, 0, from, (a7) - 7) \ - bn_cp_32(to, 1, from, (a6) - 7) \ - bn_cp_32(to, 2, from, (a5) - 7) \ - bn_cp_32(to, 3, from, (a4) - 7) \ - bn_cp_32(to, 4, from, (a3) - 7) \ - bn_cp_32(to, 5, from, (a2) - 7) \ - bn_cp_32(to, 6, from, (a1) - 7) \ - } - -int BN_nist_mod_224(BIGNUM *r, const BIGNUM *a, const BIGNUM *field, - BN_CTX *ctx) - { - int top = a->top, i; - int carry; - BN_ULONG *r_d, *a_d = a->d; - BN_ULONG t_d[BN_NIST_224_TOP], - buf[BN_NIST_224_TOP], - c_d[BN_NIST_224_TOP], - *res; - PTR_SIZE_INT mask; - union { bn_addsub_f f; PTR_SIZE_INT p; } u; - static const BIGNUM _bignum_nist_p_224_sqr = { - (BN_ULONG *)_nist_p_224_sqr, - sizeof(_nist_p_224_sqr)/sizeof(_nist_p_224_sqr[0]), - sizeof(_nist_p_224_sqr)/sizeof(_nist_p_224_sqr[0]), - 0,BN_FLG_STATIC_DATA }; - - - field = &_bignum_nist_p_224; /* just to make sure */ - - if (BN_is_negative(a) || BN_ucmp(a,&_bignum_nist_p_224_sqr)>=0) - return BN_nnmod(r, a, field, ctx); - - i = BN_ucmp(field, a); - if (i == 0) - { - BN_zero(r); - return 1; - } - else if (i > 0) - return (r == a)? 1 : (BN_copy(r ,a) != NULL); - - if (r != a) - { - if (!bn_wexpand(r, BN_NIST_224_TOP)) - return 0; - r_d = r->d; - nist_cp_bn(r_d, a_d, BN_NIST_224_TOP); - } - else - r_d = a_d; - -#if BN_BITS2==64 - /* copy upper 256 bits of 448 bit number ... */ - nist_cp_bn_0(t_d, a_d + (BN_NIST_224_TOP-1), top - (BN_NIST_224_TOP-1), BN_NIST_224_TOP); - /* ... and right shift by 32 to obtain upper 224 bits */ - nist_set_224(buf, t_d, 14, 13, 12, 11, 10, 9, 8); - /* truncate lower part to 224 bits too */ - r_d[BN_NIST_224_TOP-1] &= BN_MASK2l; -#else - nist_cp_bn_0(buf, a_d + BN_NIST_224_TOP, top - BN_NIST_224_TOP, BN_NIST_224_TOP); -#endif - nist_set_224(t_d, buf, 10, 9, 8, 7, 0, 0, 0); - carry = (int)bn_add_words(r_d, r_d, t_d, BN_NIST_224_TOP); - nist_set_224(t_d, buf, 0, 13, 12, 11, 0, 0, 0); - carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_224_TOP); - nist_set_224(t_d, buf, 13, 12, 11, 10, 9, 8, 7); - carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_224_TOP); - nist_set_224(t_d, buf, 0, 0, 0, 0, 13, 12, 11); - carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_224_TOP); - -#if BN_BITS2==64 - carry = (int)(r_d[BN_NIST_224_TOP-1]>>32); -#endif - u.f = bn_sub_words; - if (carry > 0) - { - carry = (int)bn_sub_words(r_d,r_d,_nist_p_224[carry-1],BN_NIST_224_TOP); -#if BN_BITS2==64 - carry=(int)(~(r_d[BN_NIST_224_TOP-1]>>32))&1; -#endif - } - else if (carry < 0) - { - /* it's a bit more comlicated logic in this case. - * if bn_add_words yields no carry, then result - * has to be adjusted by unconditionally *adding* - * the modulus. but if it does, then result has - * to be compared to the modulus and conditionally - * adjusted by *subtracting* the latter. */ - carry = (int)bn_add_words(r_d,r_d,_nist_p_224[-carry-1],BN_NIST_224_TOP); - mask = 0-(PTR_SIZE_INT)carry; - u.p = ((PTR_SIZE_INT)bn_sub_words&mask) | - ((PTR_SIZE_INT)bn_add_words&~mask); - } - else - carry = 1; - - /* otherwise it's effectively same as in BN_nist_mod_192... */ - mask = 0-(PTR_SIZE_INT)(*u.f)(c_d,r_d,_nist_p_224[0],BN_NIST_224_TOP); - mask &= 0-(PTR_SIZE_INT)carry; - res = (BN_ULONG *)(((PTR_SIZE_INT)c_d&~mask) | - ((PTR_SIZE_INT)r_d&mask)); - nist_cp_bn(r_d, res, BN_NIST_224_TOP); - r->top = BN_NIST_224_TOP; - bn_correct_top(r); - - return 1; - } - -#define nist_set_256(to, from, a1, a2, a3, a4, a5, a6, a7, a8) \ - { \ - bn_cp_32(to, 0, from, (a8) - 8) \ - bn_cp_32(to, 1, from, (a7) - 8) \ - bn_cp_32(to, 2, from, (a6) - 8) \ - bn_cp_32(to, 3, from, (a5) - 8) \ - bn_cp_32(to, 4, from, (a4) - 8) \ - bn_cp_32(to, 5, from, (a3) - 8) \ - bn_cp_32(to, 6, from, (a2) - 8) \ - bn_cp_32(to, 7, from, (a1) - 8) \ - } - -int BN_nist_mod_256(BIGNUM *r, const BIGNUM *a, const BIGNUM *field, - BN_CTX *ctx) - { - int i, top = a->top; - int carry = 0; - register BN_ULONG *a_d = a->d, *r_d; - BN_ULONG t_d[BN_NIST_256_TOP], - buf[BN_NIST_256_TOP], - c_d[BN_NIST_256_TOP], - *res; - PTR_SIZE_INT mask; - union { bn_addsub_f f; PTR_SIZE_INT p; } u; - static const BIGNUM _bignum_nist_p_256_sqr = { - (BN_ULONG *)_nist_p_256_sqr, - sizeof(_nist_p_256_sqr)/sizeof(_nist_p_256_sqr[0]), - sizeof(_nist_p_256_sqr)/sizeof(_nist_p_256_sqr[0]), - 0,BN_FLG_STATIC_DATA }; - - field = &_bignum_nist_p_256; /* just to make sure */ - - if (BN_is_negative(a) || BN_ucmp(a,&_bignum_nist_p_256_sqr)>=0) - return BN_nnmod(r, a, field, ctx); - - i = BN_ucmp(field, a); - if (i == 0) - { - BN_zero(r); - return 1; - } - else if (i > 0) - return (r == a)? 1 : (BN_copy(r ,a) != NULL); - - if (r != a) - { - if (!bn_wexpand(r, BN_NIST_256_TOP)) - return 0; - r_d = r->d; - nist_cp_bn(r_d, a_d, BN_NIST_256_TOP); - } - else - r_d = a_d; - - nist_cp_bn_0(buf, a_d + BN_NIST_256_TOP, top - BN_NIST_256_TOP, BN_NIST_256_TOP); - - /*S1*/ - nist_set_256(t_d, buf, 15, 14, 13, 12, 11, 0, 0, 0); - /*S2*/ - nist_set_256(c_d, buf, 0, 15, 14, 13, 12, 0, 0, 0); - carry = (int)bn_add_words(t_d, t_d, c_d, BN_NIST_256_TOP); - /* left shift */ - { - register BN_ULONG *ap,t,c; - ap = t_d; - c=0; - for (i = BN_NIST_256_TOP; i != 0; --i) - { - t= *ap; - *(ap++)=((t<<1)|c)&BN_MASK2; - c=(t & BN_TBIT)?1:0; - } - carry <<= 1; - carry |= c; - } - carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_256_TOP); - /*S3*/ - nist_set_256(t_d, buf, 15, 14, 0, 0, 0, 10, 9, 8); - carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_256_TOP); - /*S4*/ - nist_set_256(t_d, buf, 8, 13, 15, 14, 13, 11, 10, 9); - carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_256_TOP); - /*D1*/ - nist_set_256(t_d, buf, 10, 8, 0, 0, 0, 13, 12, 11); - carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_256_TOP); - /*D2*/ - nist_set_256(t_d, buf, 11, 9, 0, 0, 15, 14, 13, 12); - carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_256_TOP); - /*D3*/ - nist_set_256(t_d, buf, 12, 0, 10, 9, 8, 15, 14, 13); - carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_256_TOP); - /*D4*/ - nist_set_256(t_d, buf, 13, 0, 11, 10, 9, 0, 15, 14); - carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_256_TOP); - - /* see BN_nist_mod_224 for explanation */ - u.f = bn_sub_words; - if (carry > 0) - carry = (int)bn_sub_words(r_d,r_d,_nist_p_256[carry-1],BN_NIST_256_TOP); - else if (carry < 0) - { - carry = (int)bn_add_words(r_d,r_d,_nist_p_256[-carry-1],BN_NIST_256_TOP); - mask = 0-(PTR_SIZE_INT)carry; - u.p = ((PTR_SIZE_INT)bn_sub_words&mask) | - ((PTR_SIZE_INT)bn_add_words&~mask); - } - else - carry = 1; - - mask = 0-(PTR_SIZE_INT)(*u.f)(c_d,r_d,_nist_p_256[0],BN_NIST_256_TOP); - mask &= 0-(PTR_SIZE_INT)carry; - res = (BN_ULONG *)(((PTR_SIZE_INT)c_d&~mask) | - ((PTR_SIZE_INT)r_d&mask)); - nist_cp_bn(r_d, res, BN_NIST_256_TOP); - r->top = BN_NIST_256_TOP; - bn_correct_top(r); - - return 1; - } - -#define nist_set_384(to,from,a1,a2,a3,a4,a5,a6,a7,a8,a9,a10,a11,a12) \ - { \ - bn_cp_32(to, 0, from, (a12) - 12) \ - bn_cp_32(to, 1, from, (a11) - 12) \ - bn_cp_32(to, 2, from, (a10) - 12) \ - bn_cp_32(to, 3, from, (a9) - 12) \ - bn_cp_32(to, 4, from, (a8) - 12) \ - bn_cp_32(to, 5, from, (a7) - 12) \ - bn_cp_32(to, 6, from, (a6) - 12) \ - bn_cp_32(to, 7, from, (a5) - 12) \ - bn_cp_32(to, 8, from, (a4) - 12) \ - bn_cp_32(to, 9, from, (a3) - 12) \ - bn_cp_32(to, 10, from, (a2) - 12) \ - bn_cp_32(to, 11, from, (a1) - 12) \ - } - -int BN_nist_mod_384(BIGNUM *r, const BIGNUM *a, const BIGNUM *field, - BN_CTX *ctx) - { - int i, top = a->top; - int carry = 0; - register BN_ULONG *r_d, *a_d = a->d; - BN_ULONG t_d[BN_NIST_384_TOP], - buf[BN_NIST_384_TOP], - c_d[BN_NIST_384_TOP], - *res; - PTR_SIZE_INT mask; - union { bn_addsub_f f; PTR_SIZE_INT p; } u; - static const BIGNUM _bignum_nist_p_384_sqr = { - (BN_ULONG *)_nist_p_384_sqr, - sizeof(_nist_p_384_sqr)/sizeof(_nist_p_384_sqr[0]), - sizeof(_nist_p_384_sqr)/sizeof(_nist_p_384_sqr[0]), - 0,BN_FLG_STATIC_DATA }; - - - field = &_bignum_nist_p_384; /* just to make sure */ - - if (BN_is_negative(a) || BN_ucmp(a,&_bignum_nist_p_384_sqr)>=0) - return BN_nnmod(r, a, field, ctx); - - i = BN_ucmp(field, a); - if (i == 0) - { - BN_zero(r); - return 1; - } - else if (i > 0) - return (r == a)? 1 : (BN_copy(r ,a) != NULL); - - if (r != a) - { - if (!bn_wexpand(r, BN_NIST_384_TOP)) - return 0; - r_d = r->d; - nist_cp_bn(r_d, a_d, BN_NIST_384_TOP); - } - else - r_d = a_d; - - nist_cp_bn_0(buf, a_d + BN_NIST_384_TOP, top - BN_NIST_384_TOP, BN_NIST_384_TOP); - - /*S1*/ - nist_set_256(t_d, buf, 0, 0, 0, 0, 0, 23-4, 22-4, 21-4); - /* left shift */ - { - register BN_ULONG *ap,t,c; - ap = t_d; - c=0; - for (i = 3; i != 0; --i) - { - t= *ap; - *(ap++)=((t<<1)|c)&BN_MASK2; - c=(t & BN_TBIT)?1:0; - } - *ap=c; - } - carry = (int)bn_add_words(r_d+(128/BN_BITS2), r_d+(128/BN_BITS2), - t_d, BN_NIST_256_TOP); - /*S2 */ - carry += (int)bn_add_words(r_d, r_d, buf, BN_NIST_384_TOP); - /*S3*/ - nist_set_384(t_d,buf,20,19,18,17,16,15,14,13,12,23,22,21); - carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_384_TOP); - /*S4*/ - nist_set_384(t_d,buf,19,18,17,16,15,14,13,12,20,0,23,0); - carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_384_TOP); - /*S5*/ - nist_set_384(t_d, buf,0,0,0,0,23,22,21,20,0,0,0,0); - carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_384_TOP); - /*S6*/ - nist_set_384(t_d,buf,0,0,0,0,0,0,23,22,21,0,0,20); - carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_384_TOP); - /*D1*/ - nist_set_384(t_d,buf,22,21,20,19,18,17,16,15,14,13,12,23); - carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_384_TOP); - /*D2*/ - nist_set_384(t_d,buf,0,0,0,0,0,0,0,23,22,21,20,0); - carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_384_TOP); - /*D3*/ - nist_set_384(t_d,buf,0,0,0,0,0,0,0,23,23,0,0,0); - carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_384_TOP); - - /* see BN_nist_mod_224 for explanation */ - u.f = bn_sub_words; - if (carry > 0) - carry = (int)bn_sub_words(r_d,r_d,_nist_p_384[carry-1],BN_NIST_384_TOP); - else if (carry < 0) - { - carry = (int)bn_add_words(r_d,r_d,_nist_p_384[-carry-1],BN_NIST_384_TOP); - mask = 0-(PTR_SIZE_INT)carry; - u.p = ((PTR_SIZE_INT)bn_sub_words&mask) | - ((PTR_SIZE_INT)bn_add_words&~mask); - } - else - carry = 1; - - mask = 0-(PTR_SIZE_INT)(*u.f)(c_d,r_d,_nist_p_384[0],BN_NIST_384_TOP); - mask &= 0-(PTR_SIZE_INT)carry; - res = (BN_ULONG *)(((PTR_SIZE_INT)c_d&~mask) | - ((PTR_SIZE_INT)r_d&mask)); - nist_cp_bn(r_d, res, BN_NIST_384_TOP); - r->top = BN_NIST_384_TOP; - bn_correct_top(r); - - return 1; - } - -#define BN_NIST_521_RSHIFT (521%BN_BITS2) -#define BN_NIST_521_LSHIFT (BN_BITS2-BN_NIST_521_RSHIFT) -#define BN_NIST_521_TOP_MASK ((BN_ULONG)BN_MASK2>>BN_NIST_521_LSHIFT) - -int BN_nist_mod_521(BIGNUM *r, const BIGNUM *a, const BIGNUM *field, - BN_CTX *ctx) - { - int top = a->top, i; - BN_ULONG *r_d, *a_d = a->d, - t_d[BN_NIST_521_TOP], - val,tmp,*res; - PTR_SIZE_INT mask; - static const BIGNUM _bignum_nist_p_521_sqr = { - (BN_ULONG *)_nist_p_521_sqr, - sizeof(_nist_p_521_sqr)/sizeof(_nist_p_521_sqr[0]), - sizeof(_nist_p_521_sqr)/sizeof(_nist_p_521_sqr[0]), - 0,BN_FLG_STATIC_DATA }; - - field = &_bignum_nist_p_521; /* just to make sure */ - - if (BN_is_negative(a) || BN_ucmp(a,&_bignum_nist_p_521_sqr)>=0) - return BN_nnmod(r, a, field, ctx); - - i = BN_ucmp(field, a); - if (i == 0) - { - BN_zero(r); - return 1; - } - else if (i > 0) - return (r == a)? 1 : (BN_copy(r ,a) != NULL); - - if (r != a) - { - if (!bn_wexpand(r,BN_NIST_521_TOP)) - return 0; - r_d = r->d; - nist_cp_bn(r_d,a_d, BN_NIST_521_TOP); - } - else - r_d = a_d; - - /* upper 521 bits, copy ... */ - nist_cp_bn_0(t_d,a_d + (BN_NIST_521_TOP-1), top - (BN_NIST_521_TOP-1),BN_NIST_521_TOP); - /* ... and right shift */ - for (val=t_d[0],i=0; i<BN_NIST_521_TOP-1; i++) - { - tmp = val>>BN_NIST_521_RSHIFT; - val = t_d[i+1]; - t_d[i] = (tmp | val<<BN_NIST_521_LSHIFT) & BN_MASK2; - } - t_d[i] = val>>BN_NIST_521_RSHIFT; - /* lower 521 bits */ - r_d[i] &= BN_NIST_521_TOP_MASK; - - bn_add_words(r_d,r_d,t_d,BN_NIST_521_TOP); - mask = 0-(PTR_SIZE_INT)bn_sub_words(t_d,r_d,_nist_p_521,BN_NIST_521_TOP); - res = (BN_ULONG *)(((PTR_SIZE_INT)t_d&~mask) | - ((PTR_SIZE_INT)r_d&mask)); - nist_cp_bn(r_d,res,BN_NIST_521_TOP); - r->top = BN_NIST_521_TOP; - bn_correct_top(r); - - return 1; - } diff --git a/app/openssl/crypto/bn/bn_prime.c b/app/openssl/crypto/bn/bn_prime.c deleted file mode 100644 index 7b25979d..00000000 --- a/app/openssl/crypto/bn/bn_prime.c +++ /dev/null @@ -1,494 +0,0 @@ -/* crypto/bn/bn_prime.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ -/* ==================================================================== - * Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -#include <stdio.h> -#include <time.h> -#include "cryptlib.h" -#include "bn_lcl.h" -#include <openssl/rand.h> - -/* NB: these functions have been "upgraded", the deprecated versions (which are - * compatibility wrappers using these functions) are in bn_depr.c. - * - Geoff - */ - -/* The quick sieve algorithm approach to weeding out primes is - * Philip Zimmermann's, as implemented in PGP. I have had a read of - * his comments and implemented my own version. - */ -#include "bn_prime.h" - -static int witness(BIGNUM *w, const BIGNUM *a, const BIGNUM *a1, - const BIGNUM *a1_odd, int k, BN_CTX *ctx, BN_MONT_CTX *mont); -static int probable_prime(BIGNUM *rnd, int bits); -static int probable_prime_dh(BIGNUM *rnd, int bits, - const BIGNUM *add, const BIGNUM *rem, BN_CTX *ctx); -static int probable_prime_dh_safe(BIGNUM *rnd, int bits, - const BIGNUM *add, const BIGNUM *rem, BN_CTX *ctx); - -int BN_GENCB_call(BN_GENCB *cb, int a, int b) - { - /* No callback means continue */ - if(!cb) return 1; - switch(cb->ver) - { - case 1: - /* Deprecated-style callbacks */ - if(!cb->cb.cb_1) - return 1; - cb->cb.cb_1(a, b, cb->arg); - return 1; - case 2: - /* New-style callbacks */ - return cb->cb.cb_2(a, b, cb); - default: - break; - } - /* Unrecognised callback type */ - return 0; - } - -int BN_generate_prime_ex(BIGNUM *ret, int bits, int safe, - const BIGNUM *add, const BIGNUM *rem, BN_GENCB *cb) - { - BIGNUM *t; - int found=0; - int i,j,c1=0; - BN_CTX *ctx; - int checks = BN_prime_checks_for_size(bits); - - ctx=BN_CTX_new(); - if (ctx == NULL) goto err; - BN_CTX_start(ctx); - t = BN_CTX_get(ctx); - if(!t) goto err; -loop: - /* make a random number and set the top and bottom bits */ - if (add == NULL) - { - if (!probable_prime(ret,bits)) goto err; - } - else - { - if (safe) - { - if (!probable_prime_dh_safe(ret,bits,add,rem,ctx)) - goto err; - } - else - { - if (!probable_prime_dh(ret,bits,add,rem,ctx)) - goto err; - } - } - /* if (BN_mod_word(ret,(BN_ULONG)3) == 1) goto loop; */ - if(!BN_GENCB_call(cb, 0, c1++)) - /* aborted */ - goto err; - - if (!safe) - { - i=BN_is_prime_fasttest_ex(ret,checks,ctx,0,cb); - if (i == -1) goto err; - if (i == 0) goto loop; - } - else - { - /* for "safe prime" generation, - * check that (p-1)/2 is prime. - * Since a prime is odd, We just - * need to divide by 2 */ - if (!BN_rshift1(t,ret)) goto err; - - for (i=0; i<checks; i++) - { - j=BN_is_prime_fasttest_ex(ret,1,ctx,0,cb); - if (j == -1) goto err; - if (j == 0) goto loop; - - j=BN_is_prime_fasttest_ex(t,1,ctx,0,cb); - if (j == -1) goto err; - if (j == 0) goto loop; - - if(!BN_GENCB_call(cb, 2, c1-1)) - goto err; - /* We have a safe prime test pass */ - } - } - /* we have a prime :-) */ - found = 1; -err: - if (ctx != NULL) - { - BN_CTX_end(ctx); - BN_CTX_free(ctx); - } - bn_check_top(ret); - return found; - } - -int BN_is_prime_ex(const BIGNUM *a, int checks, BN_CTX *ctx_passed, BN_GENCB *cb) - { - return BN_is_prime_fasttest_ex(a, checks, ctx_passed, 0, cb); - } - -int BN_is_prime_fasttest_ex(const BIGNUM *a, int checks, BN_CTX *ctx_passed, - int do_trial_division, BN_GENCB *cb) - { - int i, j, ret = -1; - int k; - BN_CTX *ctx = NULL; - BIGNUM *A1, *A1_odd, *check; /* taken from ctx */ - BN_MONT_CTX *mont = NULL; - const BIGNUM *A = NULL; - - if (BN_cmp(a, BN_value_one()) <= 0) - return 0; - - if (checks == BN_prime_checks) - checks = BN_prime_checks_for_size(BN_num_bits(a)); - - /* first look for small factors */ - if (!BN_is_odd(a)) - /* a is even => a is prime if and only if a == 2 */ - return BN_is_word(a, 2); - if (do_trial_division) - { - for (i = 1; i < NUMPRIMES; i++) - if (BN_mod_word(a, primes[i]) == 0) - return 0; - if(!BN_GENCB_call(cb, 1, -1)) - goto err; - } - - if (ctx_passed != NULL) - ctx = ctx_passed; - else - if ((ctx=BN_CTX_new()) == NULL) - goto err; - BN_CTX_start(ctx); - - /* A := abs(a) */ - if (a->neg) - { - BIGNUM *t; - if ((t = BN_CTX_get(ctx)) == NULL) goto err; - BN_copy(t, a); - t->neg = 0; - A = t; - } - else - A = a; - A1 = BN_CTX_get(ctx); - A1_odd = BN_CTX_get(ctx); - check = BN_CTX_get(ctx); - if (check == NULL) goto err; - - /* compute A1 := A - 1 */ - if (!BN_copy(A1, A)) - goto err; - if (!BN_sub_word(A1, 1)) - goto err; - if (BN_is_zero(A1)) - { - ret = 0; - goto err; - } - - /* write A1 as A1_odd * 2^k */ - k = 1; - while (!BN_is_bit_set(A1, k)) - k++; - if (!BN_rshift(A1_odd, A1, k)) - goto err; - - /* Montgomery setup for computations mod A */ - mont = BN_MONT_CTX_new(); - if (mont == NULL) - goto err; - if (!BN_MONT_CTX_set(mont, A, ctx)) - goto err; - - for (i = 0; i < checks; i++) - { - if (!BN_pseudo_rand_range(check, A1)) - goto err; - if (!BN_add_word(check, 1)) - goto err; - /* now 1 <= check < A */ - - j = witness(check, A, A1, A1_odd, k, ctx, mont); - if (j == -1) goto err; - if (j) - { - ret=0; - goto err; - } - if(!BN_GENCB_call(cb, 1, i)) - goto err; - } - ret=1; -err: - if (ctx != NULL) - { - BN_CTX_end(ctx); - if (ctx_passed == NULL) - BN_CTX_free(ctx); - } - if (mont != NULL) - BN_MONT_CTX_free(mont); - - return(ret); - } - -static int witness(BIGNUM *w, const BIGNUM *a, const BIGNUM *a1, - const BIGNUM *a1_odd, int k, BN_CTX *ctx, BN_MONT_CTX *mont) - { - if (!BN_mod_exp_mont(w, w, a1_odd, a, ctx, mont)) /* w := w^a1_odd mod a */ - return -1; - if (BN_is_one(w)) - return 0; /* probably prime */ - if (BN_cmp(w, a1) == 0) - return 0; /* w == -1 (mod a), 'a' is probably prime */ - while (--k) - { - if (!BN_mod_mul(w, w, w, a, ctx)) /* w := w^2 mod a */ - return -1; - if (BN_is_one(w)) - return 1; /* 'a' is composite, otherwise a previous 'w' would - * have been == -1 (mod 'a') */ - if (BN_cmp(w, a1) == 0) - return 0; /* w == -1 (mod a), 'a' is probably prime */ - } - /* If we get here, 'w' is the (a-1)/2-th power of the original 'w', - * and it is neither -1 nor +1 -- so 'a' cannot be prime */ - bn_check_top(w); - return 1; - } - -static int probable_prime(BIGNUM *rnd, int bits) - { - int i; - prime_t mods[NUMPRIMES]; - BN_ULONG delta,maxdelta; - -again: - if (!BN_rand(rnd,bits,1,1)) return(0); - /* we now have a random number 'rand' to test. */ - for (i=1; i<NUMPRIMES; i++) - mods[i]=(prime_t)BN_mod_word(rnd,(BN_ULONG)primes[i]); - maxdelta=BN_MASK2 - primes[NUMPRIMES-1]; - delta=0; - loop: for (i=1; i<NUMPRIMES; i++) - { - /* check that rnd is not a prime and also - * that gcd(rnd-1,primes) == 1 (except for 2) */ - if (((mods[i]+delta)%primes[i]) <= 1) - { - delta+=2; - if (delta > maxdelta) goto again; - goto loop; - } - } - if (!BN_add_word(rnd,delta)) return(0); - bn_check_top(rnd); - return(1); - } - -static int probable_prime_dh(BIGNUM *rnd, int bits, - const BIGNUM *add, const BIGNUM *rem, BN_CTX *ctx) - { - int i,ret=0; - BIGNUM *t1; - - BN_CTX_start(ctx); - if ((t1 = BN_CTX_get(ctx)) == NULL) goto err; - - if (!BN_rand(rnd,bits,0,1)) goto err; - - /* we need ((rnd-rem) % add) == 0 */ - - if (!BN_mod(t1,rnd,add,ctx)) goto err; - if (!BN_sub(rnd,rnd,t1)) goto err; - if (rem == NULL) - { if (!BN_add_word(rnd,1)) goto err; } - else - { if (!BN_add(rnd,rnd,rem)) goto err; } - - /* we now have a random number 'rand' to test. */ - - loop: for (i=1; i<NUMPRIMES; i++) - { - /* check that rnd is a prime */ - if (BN_mod_word(rnd,(BN_ULONG)primes[i]) <= 1) - { - if (!BN_add(rnd,rnd,add)) goto err; - goto loop; - } - } - ret=1; -err: - BN_CTX_end(ctx); - bn_check_top(rnd); - return(ret); - } - -static int probable_prime_dh_safe(BIGNUM *p, int bits, const BIGNUM *padd, - const BIGNUM *rem, BN_CTX *ctx) - { - int i,ret=0; - BIGNUM *t1,*qadd,*q; - - bits--; - BN_CTX_start(ctx); - t1 = BN_CTX_get(ctx); - q = BN_CTX_get(ctx); - qadd = BN_CTX_get(ctx); - if (qadd == NULL) goto err; - - if (!BN_rshift1(qadd,padd)) goto err; - - if (!BN_rand(q,bits,0,1)) goto err; - - /* we need ((rnd-rem) % add) == 0 */ - if (!BN_mod(t1,q,qadd,ctx)) goto err; - if (!BN_sub(q,q,t1)) goto err; - if (rem == NULL) - { if (!BN_add_word(q,1)) goto err; } - else - { - if (!BN_rshift1(t1,rem)) goto err; - if (!BN_add(q,q,t1)) goto err; - } - - /* we now have a random number 'rand' to test. */ - if (!BN_lshift1(p,q)) goto err; - if (!BN_add_word(p,1)) goto err; - - loop: for (i=1; i<NUMPRIMES; i++) - { - /* check that p and q are prime */ - /* check that for p and q - * gcd(p-1,primes) == 1 (except for 2) */ - if ( (BN_mod_word(p,(BN_ULONG)primes[i]) == 0) || - (BN_mod_word(q,(BN_ULONG)primes[i]) == 0)) - { - if (!BN_add(p,p,padd)) goto err; - if (!BN_add(q,q,qadd)) goto err; - goto loop; - } - } - ret=1; -err: - BN_CTX_end(ctx); - bn_check_top(p); - return(ret); - } diff --git a/app/openssl/crypto/bn/bn_prime.h b/app/openssl/crypto/bn/bn_prime.h deleted file mode 100644 index 51d2194f..00000000 --- a/app/openssl/crypto/bn/bn_prime.h +++ /dev/null @@ -1,327 +0,0 @@ -/* Auto generated by bn_prime.pl */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#ifndef EIGHT_BIT -#define NUMPRIMES 2048 -typedef unsigned short prime_t; -#else -#define NUMPRIMES 54 -typedef unsigned char prime_t; -#endif -static const prime_t primes[NUMPRIMES]= - { - 2, 3, 5, 7, 11, 13, 17, 19, - 23, 29, 31, 37, 41, 43, 47, 53, - 59, 61, 67, 71, 73, 79, 83, 89, - 97, 101, 103, 107, 109, 113, 127, 131, - 137, 139, 149, 151, 157, 163, 167, 173, - 179, 181, 191, 193, 197, 199, 211, 223, - 227, 229, 233, 239, 241, 251, -#ifndef EIGHT_BIT - 257, 263, - 269, 271, 277, 281, 283, 293, 307, 311, - 313, 317, 331, 337, 347, 349, 353, 359, - 367, 373, 379, 383, 389, 397, 401, 409, - 419, 421, 431, 433, 439, 443, 449, 457, - 461, 463, 467, 479, 487, 491, 499, 503, - 509, 521, 523, 541, 547, 557, 563, 569, - 571, 577, 587, 593, 599, 601, 607, 613, - 617, 619, 631, 641, 643, 647, 653, 659, - 661, 673, 677, 683, 691, 701, 709, 719, - 727, 733, 739, 743, 751, 757, 761, 769, - 773, 787, 797, 809, 811, 821, 823, 827, - 829, 839, 853, 857, 859, 863, 877, 881, - 883, 887, 907, 911, 919, 929, 937, 941, - 947, 953, 967, 971, 977, 983, 991, 997, - 1009,1013,1019,1021,1031,1033,1039,1049, - 1051,1061,1063,1069,1087,1091,1093,1097, - 1103,1109,1117,1123,1129,1151,1153,1163, - 1171,1181,1187,1193,1201,1213,1217,1223, - 1229,1231,1237,1249,1259,1277,1279,1283, - 1289,1291,1297,1301,1303,1307,1319,1321, - 1327,1361,1367,1373,1381,1399,1409,1423, - 1427,1429,1433,1439,1447,1451,1453,1459, - 1471,1481,1483,1487,1489,1493,1499,1511, - 1523,1531,1543,1549,1553,1559,1567,1571, - 1579,1583,1597,1601,1607,1609,1613,1619, - 1621,1627,1637,1657,1663,1667,1669,1693, - 1697,1699,1709,1721,1723,1733,1741,1747, - 1753,1759,1777,1783,1787,1789,1801,1811, - 1823,1831,1847,1861,1867,1871,1873,1877, - 1879,1889,1901,1907,1913,1931,1933,1949, - 1951,1973,1979,1987,1993,1997,1999,2003, - 2011,2017,2027,2029,2039,2053,2063,2069, - 2081,2083,2087,2089,2099,2111,2113,2129, - 2131,2137,2141,2143,2153,2161,2179,2203, - 2207,2213,2221,2237,2239,2243,2251,2267, - 2269,2273,2281,2287,2293,2297,2309,2311, - 2333,2339,2341,2347,2351,2357,2371,2377, - 2381,2383,2389,2393,2399,2411,2417,2423, - 2437,2441,2447,2459,2467,2473,2477,2503, - 2521,2531,2539,2543,2549,2551,2557,2579, - 2591,2593,2609,2617,2621,2633,2647,2657, - 2659,2663,2671,2677,2683,2687,2689,2693, - 2699,2707,2711,2713,2719,2729,2731,2741, - 2749,2753,2767,2777,2789,2791,2797,2801, - 2803,2819,2833,2837,2843,2851,2857,2861, - 2879,2887,2897,2903,2909,2917,2927,2939, - 2953,2957,2963,2969,2971,2999,3001,3011, - 3019,3023,3037,3041,3049,3061,3067,3079, - 3083,3089,3109,3119,3121,3137,3163,3167, - 3169,3181,3187,3191,3203,3209,3217,3221, - 3229,3251,3253,3257,3259,3271,3299,3301, - 3307,3313,3319,3323,3329,3331,3343,3347, - 3359,3361,3371,3373,3389,3391,3407,3413, - 3433,3449,3457,3461,3463,3467,3469,3491, - 3499,3511,3517,3527,3529,3533,3539,3541, - 3547,3557,3559,3571,3581,3583,3593,3607, - 3613,3617,3623,3631,3637,3643,3659,3671, - 3673,3677,3691,3697,3701,3709,3719,3727, - 3733,3739,3761,3767,3769,3779,3793,3797, - 3803,3821,3823,3833,3847,3851,3853,3863, - 3877,3881,3889,3907,3911,3917,3919,3923, - 3929,3931,3943,3947,3967,3989,4001,4003, - 4007,4013,4019,4021,4027,4049,4051,4057, - 4073,4079,4091,4093,4099,4111,4127,4129, - 4133,4139,4153,4157,4159,4177,4201,4211, - 4217,4219,4229,4231,4241,4243,4253,4259, - 4261,4271,4273,4283,4289,4297,4327,4337, - 4339,4349,4357,4363,4373,4391,4397,4409, - 4421,4423,4441,4447,4451,4457,4463,4481, - 4483,4493,4507,4513,4517,4519,4523,4547, - 4549,4561,4567,4583,4591,4597,4603,4621, - 4637,4639,4643,4649,4651,4657,4663,4673, - 4679,4691,4703,4721,4723,4729,4733,4751, - 4759,4783,4787,4789,4793,4799,4801,4813, - 4817,4831,4861,4871,4877,4889,4903,4909, - 4919,4931,4933,4937,4943,4951,4957,4967, - 4969,4973,4987,4993,4999,5003,5009,5011, - 5021,5023,5039,5051,5059,5077,5081,5087, - 5099,5101,5107,5113,5119,5147,5153,5167, - 5171,5179,5189,5197,5209,5227,5231,5233, - 5237,5261,5273,5279,5281,5297,5303,5309, - 5323,5333,5347,5351,5381,5387,5393,5399, - 5407,5413,5417,5419,5431,5437,5441,5443, - 5449,5471,5477,5479,5483,5501,5503,5507, - 5519,5521,5527,5531,5557,5563,5569,5573, - 5581,5591,5623,5639,5641,5647,5651,5653, - 5657,5659,5669,5683,5689,5693,5701,5711, - 5717,5737,5741,5743,5749,5779,5783,5791, - 5801,5807,5813,5821,5827,5839,5843,5849, - 5851,5857,5861,5867,5869,5879,5881,5897, - 5903,5923,5927,5939,5953,5981,5987,6007, - 6011,6029,6037,6043,6047,6053,6067,6073, - 6079,6089,6091,6101,6113,6121,6131,6133, - 6143,6151,6163,6173,6197,6199,6203,6211, - 6217,6221,6229,6247,6257,6263,6269,6271, - 6277,6287,6299,6301,6311,6317,6323,6329, - 6337,6343,6353,6359,6361,6367,6373,6379, - 6389,6397,6421,6427,6449,6451,6469,6473, - 6481,6491,6521,6529,6547,6551,6553,6563, - 6569,6571,6577,6581,6599,6607,6619,6637, - 6653,6659,6661,6673,6679,6689,6691,6701, - 6703,6709,6719,6733,6737,6761,6763,6779, - 6781,6791,6793,6803,6823,6827,6829,6833, - 6841,6857,6863,6869,6871,6883,6899,6907, - 6911,6917,6947,6949,6959,6961,6967,6971, - 6977,6983,6991,6997,7001,7013,7019,7027, - 7039,7043,7057,7069,7079,7103,7109,7121, - 7127,7129,7151,7159,7177,7187,7193,7207, - 7211,7213,7219,7229,7237,7243,7247,7253, - 7283,7297,7307,7309,7321,7331,7333,7349, - 7351,7369,7393,7411,7417,7433,7451,7457, - 7459,7477,7481,7487,7489,7499,7507,7517, - 7523,7529,7537,7541,7547,7549,7559,7561, - 7573,7577,7583,7589,7591,7603,7607,7621, - 7639,7643,7649,7669,7673,7681,7687,7691, - 7699,7703,7717,7723,7727,7741,7753,7757, - 7759,7789,7793,7817,7823,7829,7841,7853, - 7867,7873,7877,7879,7883,7901,7907,7919, - 7927,7933,7937,7949,7951,7963,7993,8009, - 8011,8017,8039,8053,8059,8069,8081,8087, - 8089,8093,8101,8111,8117,8123,8147,8161, - 8167,8171,8179,8191,8209,8219,8221,8231, - 8233,8237,8243,8263,8269,8273,8287,8291, - 8293,8297,8311,8317,8329,8353,8363,8369, - 8377,8387,8389,8419,8423,8429,8431,8443, - 8447,8461,8467,8501,8513,8521,8527,8537, - 8539,8543,8563,8573,8581,8597,8599,8609, - 8623,8627,8629,8641,8647,8663,8669,8677, - 8681,8689,8693,8699,8707,8713,8719,8731, - 8737,8741,8747,8753,8761,8779,8783,8803, - 8807,8819,8821,8831,8837,8839,8849,8861, - 8863,8867,8887,8893,8923,8929,8933,8941, - 8951,8963,8969,8971,8999,9001,9007,9011, - 9013,9029,9041,9043,9049,9059,9067,9091, - 9103,9109,9127,9133,9137,9151,9157,9161, - 9173,9181,9187,9199,9203,9209,9221,9227, - 9239,9241,9257,9277,9281,9283,9293,9311, - 9319,9323,9337,9341,9343,9349,9371,9377, - 9391,9397,9403,9413,9419,9421,9431,9433, - 9437,9439,9461,9463,9467,9473,9479,9491, - 9497,9511,9521,9533,9539,9547,9551,9587, - 9601,9613,9619,9623,9629,9631,9643,9649, - 9661,9677,9679,9689,9697,9719,9721,9733, - 9739,9743,9749,9767,9769,9781,9787,9791, - 9803,9811,9817,9829,9833,9839,9851,9857, - 9859,9871,9883,9887,9901,9907,9923,9929, - 9931,9941,9949,9967,9973,10007,10009,10037, - 10039,10061,10067,10069,10079,10091,10093,10099, - 10103,10111,10133,10139,10141,10151,10159,10163, - 10169,10177,10181,10193,10211,10223,10243,10247, - 10253,10259,10267,10271,10273,10289,10301,10303, - 10313,10321,10331,10333,10337,10343,10357,10369, - 10391,10399,10427,10429,10433,10453,10457,10459, - 10463,10477,10487,10499,10501,10513,10529,10531, - 10559,10567,10589,10597,10601,10607,10613,10627, - 10631,10639,10651,10657,10663,10667,10687,10691, - 10709,10711,10723,10729,10733,10739,10753,10771, - 10781,10789,10799,10831,10837,10847,10853,10859, - 10861,10867,10883,10889,10891,10903,10909,10937, - 10939,10949,10957,10973,10979,10987,10993,11003, - 11027,11047,11057,11059,11069,11071,11083,11087, - 11093,11113,11117,11119,11131,11149,11159,11161, - 11171,11173,11177,11197,11213,11239,11243,11251, - 11257,11261,11273,11279,11287,11299,11311,11317, - 11321,11329,11351,11353,11369,11383,11393,11399, - 11411,11423,11437,11443,11447,11467,11471,11483, - 11489,11491,11497,11503,11519,11527,11549,11551, - 11579,11587,11593,11597,11617,11621,11633,11657, - 11677,11681,11689,11699,11701,11717,11719,11731, - 11743,11777,11779,11783,11789,11801,11807,11813, - 11821,11827,11831,11833,11839,11863,11867,11887, - 11897,11903,11909,11923,11927,11933,11939,11941, - 11953,11959,11969,11971,11981,11987,12007,12011, - 12037,12041,12043,12049,12071,12073,12097,12101, - 12107,12109,12113,12119,12143,12149,12157,12161, - 12163,12197,12203,12211,12227,12239,12241,12251, - 12253,12263,12269,12277,12281,12289,12301,12323, - 12329,12343,12347,12373,12377,12379,12391,12401, - 12409,12413,12421,12433,12437,12451,12457,12473, - 12479,12487,12491,12497,12503,12511,12517,12527, - 12539,12541,12547,12553,12569,12577,12583,12589, - 12601,12611,12613,12619,12637,12641,12647,12653, - 12659,12671,12689,12697,12703,12713,12721,12739, - 12743,12757,12763,12781,12791,12799,12809,12821, - 12823,12829,12841,12853,12889,12893,12899,12907, - 12911,12917,12919,12923,12941,12953,12959,12967, - 12973,12979,12983,13001,13003,13007,13009,13033, - 13037,13043,13049,13063,13093,13099,13103,13109, - 13121,13127,13147,13151,13159,13163,13171,13177, - 13183,13187,13217,13219,13229,13241,13249,13259, - 13267,13291,13297,13309,13313,13327,13331,13337, - 13339,13367,13381,13397,13399,13411,13417,13421, - 13441,13451,13457,13463,13469,13477,13487,13499, - 13513,13523,13537,13553,13567,13577,13591,13597, - 13613,13619,13627,13633,13649,13669,13679,13681, - 13687,13691,13693,13697,13709,13711,13721,13723, - 13729,13751,13757,13759,13763,13781,13789,13799, - 13807,13829,13831,13841,13859,13873,13877,13879, - 13883,13901,13903,13907,13913,13921,13931,13933, - 13963,13967,13997,13999,14009,14011,14029,14033, - 14051,14057,14071,14081,14083,14087,14107,14143, - 14149,14153,14159,14173,14177,14197,14207,14221, - 14243,14249,14251,14281,14293,14303,14321,14323, - 14327,14341,14347,14369,14387,14389,14401,14407, - 14411,14419,14423,14431,14437,14447,14449,14461, - 14479,14489,14503,14519,14533,14537,14543,14549, - 14551,14557,14561,14563,14591,14593,14621,14627, - 14629,14633,14639,14653,14657,14669,14683,14699, - 14713,14717,14723,14731,14737,14741,14747,14753, - 14759,14767,14771,14779,14783,14797,14813,14821, - 14827,14831,14843,14851,14867,14869,14879,14887, - 14891,14897,14923,14929,14939,14947,14951,14957, - 14969,14983,15013,15017,15031,15053,15061,15073, - 15077,15083,15091,15101,15107,15121,15131,15137, - 15139,15149,15161,15173,15187,15193,15199,15217, - 15227,15233,15241,15259,15263,15269,15271,15277, - 15287,15289,15299,15307,15313,15319,15329,15331, - 15349,15359,15361,15373,15377,15383,15391,15401, - 15413,15427,15439,15443,15451,15461,15467,15473, - 15493,15497,15511,15527,15541,15551,15559,15569, - 15581,15583,15601,15607,15619,15629,15641,15643, - 15647,15649,15661,15667,15671,15679,15683,15727, - 15731,15733,15737,15739,15749,15761,15767,15773, - 15787,15791,15797,15803,15809,15817,15823,15859, - 15877,15881,15887,15889,15901,15907,15913,15919, - 15923,15937,15959,15971,15973,15991,16001,16007, - 16033,16057,16061,16063,16067,16069,16073,16087, - 16091,16097,16103,16111,16127,16139,16141,16183, - 16187,16189,16193,16217,16223,16229,16231,16249, - 16253,16267,16273,16301,16319,16333,16339,16349, - 16361,16363,16369,16381,16411,16417,16421,16427, - 16433,16447,16451,16453,16477,16481,16487,16493, - 16519,16529,16547,16553,16561,16567,16573,16603, - 16607,16619,16631,16633,16649,16651,16657,16661, - 16673,16691,16693,16699,16703,16729,16741,16747, - 16759,16763,16787,16811,16823,16829,16831,16843, - 16871,16879,16883,16889,16901,16903,16921,16927, - 16931,16937,16943,16963,16979,16981,16987,16993, - 17011,17021,17027,17029,17033,17041,17047,17053, - 17077,17093,17099,17107,17117,17123,17137,17159, - 17167,17183,17189,17191,17203,17207,17209,17231, - 17239,17257,17291,17293,17299,17317,17321,17327, - 17333,17341,17351,17359,17377,17383,17387,17389, - 17393,17401,17417,17419,17431,17443,17449,17467, - 17471,17477,17483,17489,17491,17497,17509,17519, - 17539,17551,17569,17573,17579,17581,17597,17599, - 17609,17623,17627,17657,17659,17669,17681,17683, - 17707,17713,17729,17737,17747,17749,17761,17783, - 17789,17791,17807,17827,17837,17839,17851,17863, -#endif - }; diff --git a/app/openssl/crypto/bn/bn_prime.pl b/app/openssl/crypto/bn/bn_prime.pl deleted file mode 100644 index 3fafb6f3..00000000 --- a/app/openssl/crypto/bn/bn_prime.pl +++ /dev/null @@ -1,119 +0,0 @@ -#!/usr/local/bin/perl -# bn_prime.pl - -$num=2048; -$num=$ARGV[0] if ($#ARGV >= 0); - -push(@primes,2); -$p=1; -loop: while ($#primes < $num-1) - { - $p+=2; - $s=int(sqrt($p)); - - for ($i=0; defined($primes[$i]) && $primes[$i]<=$s; $i++) - { - next loop if (($p%$primes[$i]) == 0); - } - push(@primes,$p); - } - -# print <<"EOF"; -# /* Auto generated by bn_prime.pl */ -# /* Copyright (C) 1995-1997 Eric Young (eay\@mincom.oz.au). -# * All rights reserved. -# * Copyright remains Eric Young's, and as such any Copyright notices in -# * the code are not to be removed. -# * See the COPYRIGHT file in the SSLeay distribution for more details. -# */ -# -# EOF - -print <<\EOF; -/* Auto generated by bn_prime.pl */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -EOF - -for ($i=0; $i <= $#primes; $i++) - { - if ($primes[$i] > 256) - { - $eight=$i; - last; - } - } - -printf "#ifndef EIGHT_BIT\n"; -printf "#define NUMPRIMES %d\n",$num; -printf "typedef unsigned short prime_t;\n"; -printf "#else\n"; -printf "#define NUMPRIMES %d\n",$eight; -printf "typedef unsigned char prime_t;\n"; -printf "#endif\n"; -print "static const prime_t primes[NUMPRIMES]=\n\t{\n\t"; -$init=0; -for ($i=0; $i <= $#primes; $i++) - { - printf "\n#ifndef EIGHT_BIT\n\t" if ($primes[$i] > 256) && !($init++); - printf("\n\t") if (($i%8) == 0) && ($i != 0); - printf("%4d,",$primes[$i]); - } -print "\n#endif\n\t};\n"; - - diff --git a/app/openssl/crypto/bn/bn_print.c b/app/openssl/crypto/bn/bn_print.c deleted file mode 100644 index bebb466d..00000000 --- a/app/openssl/crypto/bn/bn_print.c +++ /dev/null @@ -1,359 +0,0 @@ -/* crypto/bn/bn_print.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include <ctype.h> -#include "cryptlib.h" -#include <openssl/buffer.h> -#include "bn_lcl.h" - -static const char Hex[]="0123456789ABCDEF"; - -/* Must 'OPENSSL_free' the returned data */ -char *BN_bn2hex(const BIGNUM *a) - { - int i,j,v,z=0; - char *buf; - char *p; - - buf=(char *)OPENSSL_malloc(a->top*BN_BYTES*2+2); - if (buf == NULL) - { - BNerr(BN_F_BN_BN2HEX,ERR_R_MALLOC_FAILURE); - goto err; - } - p=buf; - if (a->neg) *(p++)='-'; - if (BN_is_zero(a)) *(p++)='0'; - for (i=a->top-1; i >=0; i--) - { - for (j=BN_BITS2-8; j >= 0; j-=8) - { - /* strip leading zeros */ - v=((int)(a->d[i]>>(long)j))&0xff; - if (z || (v != 0)) - { - *(p++)=Hex[v>>4]; - *(p++)=Hex[v&0x0f]; - z=1; - } - } - } - *p='\0'; -err: - return(buf); - } - -/* Must 'OPENSSL_free' the returned data */ -char *BN_bn2dec(const BIGNUM *a) - { - int i=0,num, ok = 0; - char *buf=NULL; - char *p; - BIGNUM *t=NULL; - BN_ULONG *bn_data=NULL,*lp; - - /* get an upper bound for the length of the decimal integer - * num <= (BN_num_bits(a) + 1) * log(2) - * <= 3 * BN_num_bits(a) * 0.1001 + log(2) + 1 (rounding error) - * <= BN_num_bits(a)/10 + BN_num_bits/1000 + 1 + 1 - */ - i=BN_num_bits(a)*3; - num=(i/10+i/1000+1)+1; - bn_data=(BN_ULONG *)OPENSSL_malloc((num/BN_DEC_NUM+1)*sizeof(BN_ULONG)); - buf=(char *)OPENSSL_malloc(num+3); - if ((buf == NULL) || (bn_data == NULL)) - { - BNerr(BN_F_BN_BN2DEC,ERR_R_MALLOC_FAILURE); - goto err; - } - if ((t=BN_dup(a)) == NULL) goto err; - -#define BUF_REMAIN (num+3 - (size_t)(p - buf)) - p=buf; - lp=bn_data; - if (BN_is_zero(t)) - { - *(p++)='0'; - *(p++)='\0'; - } - else - { - if (BN_is_negative(t)) - *p++ = '-'; - - i=0; - while (!BN_is_zero(t)) - { - *lp=BN_div_word(t,BN_DEC_CONV); - lp++; - } - lp--; - /* We now have a series of blocks, BN_DEC_NUM chars - * in length, where the last one needs truncation. - * The blocks need to be reversed in order. */ - BIO_snprintf(p,BUF_REMAIN,BN_DEC_FMT1,*lp); - while (*p) p++; - while (lp != bn_data) - { - lp--; - BIO_snprintf(p,BUF_REMAIN,BN_DEC_FMT2,*lp); - while (*p) p++; - } - } - ok = 1; -err: - if (bn_data != NULL) OPENSSL_free(bn_data); - if (t != NULL) BN_free(t); - if (!ok && buf) - { - OPENSSL_free(buf); - buf = NULL; - } - - return(buf); - } - -int BN_hex2bn(BIGNUM **bn, const char *a) - { - BIGNUM *ret=NULL; - BN_ULONG l=0; - int neg=0,h,m,i,j,k,c; - int num; - - if ((a == NULL) || (*a == '\0')) return(0); - - if (*a == '-') { neg=1; a++; } - - for (i=0; isxdigit((unsigned char) a[i]); i++) - ; - - num=i+neg; - if (bn == NULL) return(num); - - /* a is the start of the hex digits, and it is 'i' long */ - if (*bn == NULL) - { - if ((ret=BN_new()) == NULL) return(0); - } - else - { - ret= *bn; - BN_zero(ret); - } - - /* i is the number of hex digests; */ - if (bn_expand(ret,i*4) == NULL) goto err; - - j=i; /* least significant 'hex' */ - m=0; - h=0; - while (j > 0) - { - m=((BN_BYTES*2) <= j)?(BN_BYTES*2):j; - l=0; - for (;;) - { - c=a[j-m]; - if ((c >= '0') && (c <= '9')) k=c-'0'; - else if ((c >= 'a') && (c <= 'f')) k=c-'a'+10; - else if ((c >= 'A') && (c <= 'F')) k=c-'A'+10; - else k=0; /* paranoia */ - l=(l<<4)|k; - - if (--m <= 0) - { - ret->d[h++]=l; - break; - } - } - j-=(BN_BYTES*2); - } - ret->top=h; - bn_correct_top(ret); - ret->neg=neg; - - *bn=ret; - bn_check_top(ret); - return(num); -err: - if (*bn == NULL) BN_free(ret); - return(0); - } - -int BN_dec2bn(BIGNUM **bn, const char *a) - { - BIGNUM *ret=NULL; - BN_ULONG l=0; - int neg=0,i,j; - int num; - - if ((a == NULL) || (*a == '\0')) return(0); - if (*a == '-') { neg=1; a++; } - - for (i=0; isdigit((unsigned char) a[i]); i++) - ; - - num=i+neg; - if (bn == NULL) return(num); - - /* a is the start of the digits, and it is 'i' long. - * We chop it into BN_DEC_NUM digits at a time */ - if (*bn == NULL) - { - if ((ret=BN_new()) == NULL) return(0); - } - else - { - ret= *bn; - BN_zero(ret); - } - - /* i is the number of digests, a bit of an over expand; */ - if (bn_expand(ret,i*4) == NULL) goto err; - - j=BN_DEC_NUM-(i%BN_DEC_NUM); - if (j == BN_DEC_NUM) j=0; - l=0; - while (*a) - { - l*=10; - l+= *a-'0'; - a++; - if (++j == BN_DEC_NUM) - { - BN_mul_word(ret,BN_DEC_CONV); - BN_add_word(ret,l); - l=0; - j=0; - } - } - ret->neg=neg; - - bn_correct_top(ret); - *bn=ret; - bn_check_top(ret); - return(num); -err: - if (*bn == NULL) BN_free(ret); - return(0); - } - -int BN_asc2bn(BIGNUM **bn, const char *a) - { - const char *p = a; - if (*p == '-') - p++; - - if (p[0] == '0' && (p[1] == 'X' || p[1] == 'x')) - { - if (!BN_hex2bn(bn, p + 2)) - return 0; - } - else - { - if (!BN_dec2bn(bn, p)) - return 0; - } - if (*a == '-') - (*bn)->neg = 1; - return 1; - } - -#ifndef OPENSSL_NO_BIO -#ifndef OPENSSL_NO_FP_API -int BN_print_fp(FILE *fp, const BIGNUM *a) - { - BIO *b; - int ret; - - if ((b=BIO_new(BIO_s_file())) == NULL) - return(0); - BIO_set_fp(b,fp,BIO_NOCLOSE); - ret=BN_print(b,a); - BIO_free(b); - return(ret); - } -#endif - -int BN_print(BIO *bp, const BIGNUM *a) - { - int i,j,v,z=0; - int ret=0; - - if ((a->neg) && (BIO_write(bp,"-",1) != 1)) goto end; - if (BN_is_zero(a) && (BIO_write(bp,"0",1) != 1)) goto end; - for (i=a->top-1; i >=0; i--) - { - for (j=BN_BITS2-4; j >= 0; j-=4) - { - /* strip leading zeros */ - v=((int)(a->d[i]>>(long)j))&0x0f; - if (z || (v != 0)) - { - if (BIO_write(bp,&(Hex[v]),1) != 1) - goto end; - z=1; - } - } - } - ret=1; -end: - return(ret); - } -#endif diff --git a/app/openssl/crypto/bn/bn_rand.c b/app/openssl/crypto/bn/bn_rand.c deleted file mode 100644 index b376c28f..00000000 --- a/app/openssl/crypto/bn/bn_rand.c +++ /dev/null @@ -1,305 +0,0 @@ -/* crypto/bn/bn_rand.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ -/* ==================================================================== - * Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -#include <stdio.h> -#include <time.h> -#include "cryptlib.h" -#include "bn_lcl.h" -#include <openssl/rand.h> - -static int bnrand(int pseudorand, BIGNUM *rnd, int bits, int top, int bottom) - { - unsigned char *buf=NULL; - int ret=0,bit,bytes,mask; - time_t tim; - - if (bits == 0) - { - BN_zero(rnd); - return 1; - } - - bytes=(bits+7)/8; - bit=(bits-1)%8; - mask=0xff<<(bit+1); - - buf=(unsigned char *)OPENSSL_malloc(bytes); - if (buf == NULL) - { - BNerr(BN_F_BNRAND,ERR_R_MALLOC_FAILURE); - goto err; - } - - /* make a random number and set the top and bottom bits */ - time(&tim); - RAND_add(&tim,sizeof(tim),0.0); - - if (pseudorand) - { - if (RAND_pseudo_bytes(buf, bytes) == -1) - goto err; - } - else - { - if (RAND_bytes(buf, bytes) <= 0) - goto err; - } - -#if 1 - if (pseudorand == 2) - { - /* generate patterns that are more likely to trigger BN - library bugs */ - int i; - unsigned char c; - - for (i = 0; i < bytes; i++) - { - RAND_pseudo_bytes(&c, 1); - if (c >= 128 && i > 0) - buf[i] = buf[i-1]; - else if (c < 42) - buf[i] = 0; - else if (c < 84) - buf[i] = 255; - } - } -#endif - - if (top != -1) - { - if (top) - { - if (bit == 0) - { - buf[0]=1; - buf[1]|=0x80; - } - else - { - buf[0]|=(3<<(bit-1)); - } - } - else - { - buf[0]|=(1<<bit); - } - } - buf[0] &= ~mask; - if (bottom) /* set bottom bit if requested */ - buf[bytes-1]|=1; - if (!BN_bin2bn(buf,bytes,rnd)) goto err; - ret=1; -err: - if (buf != NULL) - { - OPENSSL_cleanse(buf,bytes); - OPENSSL_free(buf); - } - bn_check_top(rnd); - return(ret); - } - -int BN_rand(BIGNUM *rnd, int bits, int top, int bottom) - { - return bnrand(0, rnd, bits, top, bottom); - } - -int BN_pseudo_rand(BIGNUM *rnd, int bits, int top, int bottom) - { - return bnrand(1, rnd, bits, top, bottom); - } - -#if 1 -int BN_bntest_rand(BIGNUM *rnd, int bits, int top, int bottom) - { - return bnrand(2, rnd, bits, top, bottom); - } -#endif - - -/* random number r: 0 <= r < range */ -static int bn_rand_range(int pseudo, BIGNUM *r, const BIGNUM *range) - { - int (*bn_rand)(BIGNUM *, int, int, int) = pseudo ? BN_pseudo_rand : BN_rand; - int n; - int count = 100; - - if (range->neg || BN_is_zero(range)) - { - BNerr(BN_F_BN_RAND_RANGE, BN_R_INVALID_RANGE); - return 0; - } - - n = BN_num_bits(range); /* n > 0 */ - - /* BN_is_bit_set(range, n - 1) always holds */ - - if (n == 1) - BN_zero(r); - else if (!BN_is_bit_set(range, n - 2) && !BN_is_bit_set(range, n - 3)) - { - /* range = 100..._2, - * so 3*range (= 11..._2) is exactly one bit longer than range */ - do - { - if (!bn_rand(r, n + 1, -1, 0)) return 0; - /* If r < 3*range, use r := r MOD range - * (which is either r, r - range, or r - 2*range). - * Otherwise, iterate once more. - * Since 3*range = 11..._2, each iteration succeeds with - * probability >= .75. */ - if (BN_cmp(r ,range) >= 0) - { - if (!BN_sub(r, r, range)) return 0; - if (BN_cmp(r, range) >= 0) - if (!BN_sub(r, r, range)) return 0; - } - - if (!--count) - { - BNerr(BN_F_BN_RAND_RANGE, BN_R_TOO_MANY_ITERATIONS); - return 0; - } - - } - while (BN_cmp(r, range) >= 0); - } - else - { - do - { - /* range = 11..._2 or range = 101..._2 */ - if (!bn_rand(r, n, -1, 0)) return 0; - - if (!--count) - { - BNerr(BN_F_BN_RAND_RANGE, BN_R_TOO_MANY_ITERATIONS); - return 0; - } - } - while (BN_cmp(r, range) >= 0); - } - - bn_check_top(r); - return 1; - } - - -int BN_rand_range(BIGNUM *r, const BIGNUM *range) - { - return bn_rand_range(0, r, range); - } - -int BN_pseudo_rand_range(BIGNUM *r, const BIGNUM *range) - { - return bn_rand_range(1, r, range); - } diff --git a/app/openssl/crypto/bn/bn_recp.c b/app/openssl/crypto/bn/bn_recp.c deleted file mode 100644 index 2e8efb8d..00000000 --- a/app/openssl/crypto/bn/bn_recp.c +++ /dev/null @@ -1,234 +0,0 @@ -/* crypto/bn/bn_recp.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include "cryptlib.h" -#include "bn_lcl.h" - -void BN_RECP_CTX_init(BN_RECP_CTX *recp) - { - BN_init(&(recp->N)); - BN_init(&(recp->Nr)); - recp->num_bits=0; - recp->flags=0; - } - -BN_RECP_CTX *BN_RECP_CTX_new(void) - { - BN_RECP_CTX *ret; - - if ((ret=(BN_RECP_CTX *)OPENSSL_malloc(sizeof(BN_RECP_CTX))) == NULL) - return(NULL); - - BN_RECP_CTX_init(ret); - ret->flags=BN_FLG_MALLOCED; - return(ret); - } - -void BN_RECP_CTX_free(BN_RECP_CTX *recp) - { - if(recp == NULL) - return; - - BN_free(&(recp->N)); - BN_free(&(recp->Nr)); - if (recp->flags & BN_FLG_MALLOCED) - OPENSSL_free(recp); - } - -int BN_RECP_CTX_set(BN_RECP_CTX *recp, const BIGNUM *d, BN_CTX *ctx) - { - if (!BN_copy(&(recp->N),d)) return 0; - BN_zero(&(recp->Nr)); - recp->num_bits=BN_num_bits(d); - recp->shift=0; - return(1); - } - -int BN_mod_mul_reciprocal(BIGNUM *r, const BIGNUM *x, const BIGNUM *y, - BN_RECP_CTX *recp, BN_CTX *ctx) - { - int ret=0; - BIGNUM *a; - const BIGNUM *ca; - - BN_CTX_start(ctx); - if ((a = BN_CTX_get(ctx)) == NULL) goto err; - if (y != NULL) - { - if (x == y) - { if (!BN_sqr(a,x,ctx)) goto err; } - else - { if (!BN_mul(a,x,y,ctx)) goto err; } - ca = a; - } - else - ca=x; /* Just do the mod */ - - ret = BN_div_recp(NULL,r,ca,recp,ctx); -err: - BN_CTX_end(ctx); - bn_check_top(r); - return(ret); - } - -int BN_div_recp(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m, - BN_RECP_CTX *recp, BN_CTX *ctx) - { - int i,j,ret=0; - BIGNUM *a,*b,*d,*r; - - BN_CTX_start(ctx); - a=BN_CTX_get(ctx); - b=BN_CTX_get(ctx); - if (dv != NULL) - d=dv; - else - d=BN_CTX_get(ctx); - if (rem != NULL) - r=rem; - else - r=BN_CTX_get(ctx); - if (a == NULL || b == NULL || d == NULL || r == NULL) goto err; - - if (BN_ucmp(m,&(recp->N)) < 0) - { - BN_zero(d); - if (!BN_copy(r,m)) return 0; - BN_CTX_end(ctx); - return(1); - } - - /* We want the remainder - * Given input of ABCDEF / ab - * we need multiply ABCDEF by 3 digests of the reciprocal of ab - * - */ - - /* i := max(BN_num_bits(m), 2*BN_num_bits(N)) */ - i=BN_num_bits(m); - j=recp->num_bits<<1; - if (j>i) i=j; - - /* Nr := round(2^i / N) */ - if (i != recp->shift) - recp->shift=BN_reciprocal(&(recp->Nr),&(recp->N), - i,ctx); /* BN_reciprocal returns i, or -1 for an error */ - if (recp->shift == -1) goto err; - - /* d := |round(round(m / 2^BN_num_bits(N)) * recp->Nr / 2^(i - BN_num_bits(N)))| - * = |round(round(m / 2^BN_num_bits(N)) * round(2^i / N) / 2^(i - BN_num_bits(N)))| - * <= |(m / 2^BN_num_bits(N)) * (2^i / N) * (2^BN_num_bits(N) / 2^i)| - * = |m/N| - */ - if (!BN_rshift(a,m,recp->num_bits)) goto err; - if (!BN_mul(b,a,&(recp->Nr),ctx)) goto err; - if (!BN_rshift(d,b,i-recp->num_bits)) goto err; - d->neg=0; - - if (!BN_mul(b,&(recp->N),d,ctx)) goto err; - if (!BN_usub(r,m,b)) goto err; - r->neg=0; - -#if 1 - j=0; - while (BN_ucmp(r,&(recp->N)) >= 0) - { - if (j++ > 2) - { - BNerr(BN_F_BN_DIV_RECP,BN_R_BAD_RECIPROCAL); - goto err; - } - if (!BN_usub(r,r,&(recp->N))) goto err; - if (!BN_add_word(d,1)) goto err; - } -#endif - - r->neg=BN_is_zero(r)?0:m->neg; - d->neg=m->neg^recp->N.neg; - ret=1; -err: - BN_CTX_end(ctx); - bn_check_top(dv); - bn_check_top(rem); - return(ret); - } - -/* len is the expected size of the result - * We actually calculate with an extra word of precision, so - * we can do faster division if the remainder is not required. - */ -/* r := 2^len / m */ -int BN_reciprocal(BIGNUM *r, const BIGNUM *m, int len, BN_CTX *ctx) - { - int ret= -1; - BIGNUM *t; - - BN_CTX_start(ctx); - if((t = BN_CTX_get(ctx)) == NULL) goto err; - - if (!BN_set_bit(t,len)) goto err; - - if (!BN_div(r,NULL,t,m,ctx)) goto err; - - ret=len; -err: - bn_check_top(r); - BN_CTX_end(ctx); - return(ret); - } diff --git a/app/openssl/crypto/bn/bn_shift.c b/app/openssl/crypto/bn/bn_shift.c deleted file mode 100644 index c4d301af..00000000 --- a/app/openssl/crypto/bn/bn_shift.c +++ /dev/null @@ -1,220 +0,0 @@ -/* crypto/bn/bn_shift.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include "cryptlib.h" -#include "bn_lcl.h" - -int BN_lshift1(BIGNUM *r, const BIGNUM *a) - { - register BN_ULONG *ap,*rp,t,c; - int i; - - bn_check_top(r); - bn_check_top(a); - - if (r != a) - { - r->neg=a->neg; - if (bn_wexpand(r,a->top+1) == NULL) return(0); - r->top=a->top; - } - else - { - if (bn_wexpand(r,a->top+1) == NULL) return(0); - } - ap=a->d; - rp=r->d; - c=0; - for (i=0; i<a->top; i++) - { - t= *(ap++); - *(rp++)=((t<<1)|c)&BN_MASK2; - c=(t & BN_TBIT)?1:0; - } - if (c) - { - *rp=1; - r->top++; - } - bn_check_top(r); - return(1); - } - -int BN_rshift1(BIGNUM *r, const BIGNUM *a) - { - BN_ULONG *ap,*rp,t,c; - int i; - - bn_check_top(r); - bn_check_top(a); - - if (BN_is_zero(a)) - { - BN_zero(r); - return(1); - } - if (a != r) - { - if (bn_wexpand(r,a->top) == NULL) return(0); - r->top=a->top; - r->neg=a->neg; - } - ap=a->d; - rp=r->d; - c=0; - for (i=a->top-1; i>=0; i--) - { - t=ap[i]; - rp[i]=((t>>1)&BN_MASK2)|c; - c=(t&1)?BN_TBIT:0; - } - bn_correct_top(r); - bn_check_top(r); - return(1); - } - -int BN_lshift(BIGNUM *r, const BIGNUM *a, int n) - { - int i,nw,lb,rb; - BN_ULONG *t,*f; - BN_ULONG l; - - bn_check_top(r); - bn_check_top(a); - - r->neg=a->neg; - nw=n/BN_BITS2; - if (bn_wexpand(r,a->top+nw+1) == NULL) return(0); - lb=n%BN_BITS2; - rb=BN_BITS2-lb; - f=a->d; - t=r->d; - t[a->top+nw]=0; - if (lb == 0) - for (i=a->top-1; i>=0; i--) - t[nw+i]=f[i]; - else - for (i=a->top-1; i>=0; i--) - { - l=f[i]; - t[nw+i+1]|=(l>>rb)&BN_MASK2; - t[nw+i]=(l<<lb)&BN_MASK2; - } - memset(t,0,nw*sizeof(t[0])); -/* for (i=0; i<nw; i++) - t[i]=0;*/ - r->top=a->top+nw+1; - bn_correct_top(r); - bn_check_top(r); - return(1); - } - -int BN_rshift(BIGNUM *r, const BIGNUM *a, int n) - { - int i,j,nw,lb,rb; - BN_ULONG *t,*f; - BN_ULONG l,tmp; - - bn_check_top(r); - bn_check_top(a); - - nw=n/BN_BITS2; - rb=n%BN_BITS2; - lb=BN_BITS2-rb; - if (nw >= a->top || a->top == 0) - { - BN_zero(r); - return(1); - } - if (r != a) - { - r->neg=a->neg; - if (bn_wexpand(r,a->top-nw+1) == NULL) return(0); - } - else - { - if (n == 0) - return 1; /* or the copying loop will go berserk */ - } - - f= &(a->d[nw]); - t=r->d; - j=a->top-nw; - r->top=j; - - if (rb == 0) - { - for (i=j; i != 0; i--) - *(t++)= *(f++); - } - else - { - l= *(f++); - for (i=j-1; i != 0; i--) - { - tmp =(l>>rb)&BN_MASK2; - l= *(f++); - *(t++) =(tmp|(l<<lb))&BN_MASK2; - } - *(t++) =(l>>rb)&BN_MASK2; - } - bn_correct_top(r); - bn_check_top(r); - return(1); - } diff --git a/app/openssl/crypto/bn/bn_sqr.c b/app/openssl/crypto/bn/bn_sqr.c deleted file mode 100644 index 270d0cd3..00000000 --- a/app/openssl/crypto/bn/bn_sqr.c +++ /dev/null @@ -1,294 +0,0 @@ -/* crypto/bn/bn_sqr.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include "cryptlib.h" -#include "bn_lcl.h" - -/* r must not be a */ -/* I've just gone over this and it is now %20 faster on x86 - eay - 27 Jun 96 */ -int BN_sqr(BIGNUM *r, const BIGNUM *a, BN_CTX *ctx) - { - int max,al; - int ret = 0; - BIGNUM *tmp,*rr; - -#ifdef BN_COUNT - fprintf(stderr,"BN_sqr %d * %d\n",a->top,a->top); -#endif - bn_check_top(a); - - al=a->top; - if (al <= 0) - { - r->top=0; - return 1; - } - - BN_CTX_start(ctx); - rr=(a != r) ? r : BN_CTX_get(ctx); - tmp=BN_CTX_get(ctx); - if (!rr || !tmp) goto err; - - max = 2 * al; /* Non-zero (from above) */ - if (bn_wexpand(rr,max) == NULL) goto err; - - if (al == 4) - { -#ifndef BN_SQR_COMBA - BN_ULONG t[8]; - bn_sqr_normal(rr->d,a->d,4,t); -#else - bn_sqr_comba4(rr->d,a->d); -#endif - } - else if (al == 8) - { -#ifndef BN_SQR_COMBA - BN_ULONG t[16]; - bn_sqr_normal(rr->d,a->d,8,t); -#else - bn_sqr_comba8(rr->d,a->d); -#endif - } - else - { -#if defined(BN_RECURSION) - if (al < BN_SQR_RECURSIVE_SIZE_NORMAL) - { - BN_ULONG t[BN_SQR_RECURSIVE_SIZE_NORMAL*2]; - bn_sqr_normal(rr->d,a->d,al,t); - } - else - { - int j,k; - - j=BN_num_bits_word((BN_ULONG)al); - j=1<<(j-1); - k=j+j; - if (al == j) - { - if (bn_wexpand(tmp,k*2) == NULL) goto err; - bn_sqr_recursive(rr->d,a->d,al,tmp->d); - } - else - { - if (bn_wexpand(tmp,max) == NULL) goto err; - bn_sqr_normal(rr->d,a->d,al,tmp->d); - } - } -#else - if (bn_wexpand(tmp,max) == NULL) goto err; - bn_sqr_normal(rr->d,a->d,al,tmp->d); -#endif - } - - rr->neg=0; - /* If the most-significant half of the top word of 'a' is zero, then - * the square of 'a' will max-1 words. */ - if(a->d[al - 1] == (a->d[al - 1] & BN_MASK2l)) - rr->top = max - 1; - else - rr->top = max; - if (rr != r) BN_copy(r,rr); - ret = 1; - err: - bn_check_top(rr); - bn_check_top(tmp); - BN_CTX_end(ctx); - return(ret); - } - -/* tmp must have 2*n words */ -void bn_sqr_normal(BN_ULONG *r, const BN_ULONG *a, int n, BN_ULONG *tmp) - { - int i,j,max; - const BN_ULONG *ap; - BN_ULONG *rp; - - max=n*2; - ap=a; - rp=r; - rp[0]=rp[max-1]=0; - rp++; - j=n; - - if (--j > 0) - { - ap++; - rp[j]=bn_mul_words(rp,ap,j,ap[-1]); - rp+=2; - } - - for (i=n-2; i>0; i--) - { - j--; - ap++; - rp[j]=bn_mul_add_words(rp,ap,j,ap[-1]); - rp+=2; - } - - bn_add_words(r,r,r,max); - - /* There will not be a carry */ - - bn_sqr_words(tmp,a,n); - - bn_add_words(r,r,tmp,max); - } - -#ifdef BN_RECURSION -/* r is 2*n words in size, - * a and b are both n words in size. (There's not actually a 'b' here ...) - * n must be a power of 2. - * We multiply and return the result. - * t must be 2*n words in size - * We calculate - * a[0]*b[0] - * a[0]*b[0]+a[1]*b[1]+(a[0]-a[1])*(b[1]-b[0]) - * a[1]*b[1] - */ -void bn_sqr_recursive(BN_ULONG *r, const BN_ULONG *a, int n2, BN_ULONG *t) - { - int n=n2/2; - int zero,c1; - BN_ULONG ln,lo,*p; - -#ifdef BN_COUNT - fprintf(stderr," bn_sqr_recursive %d * %d\n",n2,n2); -#endif - if (n2 == 4) - { -#ifndef BN_SQR_COMBA - bn_sqr_normal(r,a,4,t); -#else - bn_sqr_comba4(r,a); -#endif - return; - } - else if (n2 == 8) - { -#ifndef BN_SQR_COMBA - bn_sqr_normal(r,a,8,t); -#else - bn_sqr_comba8(r,a); -#endif - return; - } - if (n2 < BN_SQR_RECURSIVE_SIZE_NORMAL) - { - bn_sqr_normal(r,a,n2,t); - return; - } - /* r=(a[0]-a[1])*(a[1]-a[0]) */ - c1=bn_cmp_words(a,&(a[n]),n); - zero=0; - if (c1 > 0) - bn_sub_words(t,a,&(a[n]),n); - else if (c1 < 0) - bn_sub_words(t,&(a[n]),a,n); - else - zero=1; - - /* The result will always be negative unless it is zero */ - p= &(t[n2*2]); - - if (!zero) - bn_sqr_recursive(&(t[n2]),t,n,p); - else - memset(&(t[n2]),0,n2*sizeof(BN_ULONG)); - bn_sqr_recursive(r,a,n,p); - bn_sqr_recursive(&(r[n2]),&(a[n]),n,p); - - /* t[32] holds (a[0]-a[1])*(a[1]-a[0]), it is negative or zero - * r[10] holds (a[0]*b[0]) - * r[32] holds (b[1]*b[1]) - */ - - c1=(int)(bn_add_words(t,r,&(r[n2]),n2)); - - /* t[32] is negative */ - c1-=(int)(bn_sub_words(&(t[n2]),t,&(t[n2]),n2)); - - /* t[32] holds (a[0]-a[1])*(a[1]-a[0])+(a[0]*a[0])+(a[1]*a[1]) - * r[10] holds (a[0]*a[0]) - * r[32] holds (a[1]*a[1]) - * c1 holds the carry bits - */ - c1+=(int)(bn_add_words(&(r[n]),&(r[n]),&(t[n2]),n2)); - if (c1) - { - p= &(r[n+n2]); - lo= *p; - ln=(lo+c1)&BN_MASK2; - *p=ln; - - /* The overflow will stop before we over write - * words we should not overwrite */ - if (ln < (BN_ULONG)c1) - { - do { - p++; - lo= *p; - ln=(lo+1)&BN_MASK2; - *p=ln; - } while (ln == 0); - } - } - } -#endif diff --git a/app/openssl/crypto/bn/bn_sqrt.c b/app/openssl/crypto/bn/bn_sqrt.c deleted file mode 100644 index 6beaf9e5..00000000 --- a/app/openssl/crypto/bn/bn_sqrt.c +++ /dev/null @@ -1,393 +0,0 @@ -/* crypto/bn/bn_sqrt.c */ -/* Written by Lenka Fibikova <fibikova@exp-math.uni-essen.de> - * and Bodo Moeller for the OpenSSL project. */ -/* ==================================================================== - * Copyright (c) 1998-2000 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * openssl-core@openssl.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.openssl.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -#include "cryptlib.h" -#include "bn_lcl.h" - - -BIGNUM *BN_mod_sqrt(BIGNUM *in, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx) -/* Returns 'ret' such that - * ret^2 == a (mod p), - * using the Tonelli/Shanks algorithm (cf. Henri Cohen, "A Course - * in Algebraic Computational Number Theory", algorithm 1.5.1). - * 'p' must be prime! - */ - { - BIGNUM *ret = in; - int err = 1; - int r; - BIGNUM *A, *b, *q, *t, *x, *y; - int e, i, j; - - if (!BN_is_odd(p) || BN_abs_is_word(p, 1)) - { - if (BN_abs_is_word(p, 2)) - { - if (ret == NULL) - ret = BN_new(); - if (ret == NULL) - goto end; - if (!BN_set_word(ret, BN_is_bit_set(a, 0))) - { - if (ret != in) - BN_free(ret); - return NULL; - } - bn_check_top(ret); - return ret; - } - - BNerr(BN_F_BN_MOD_SQRT, BN_R_P_IS_NOT_PRIME); - return(NULL); - } - - if (BN_is_zero(a) || BN_is_one(a)) - { - if (ret == NULL) - ret = BN_new(); - if (ret == NULL) - goto end; - if (!BN_set_word(ret, BN_is_one(a))) - { - if (ret != in) - BN_free(ret); - return NULL; - } - bn_check_top(ret); - return ret; - } - - BN_CTX_start(ctx); - A = BN_CTX_get(ctx); - b = BN_CTX_get(ctx); - q = BN_CTX_get(ctx); - t = BN_CTX_get(ctx); - x = BN_CTX_get(ctx); - y = BN_CTX_get(ctx); - if (y == NULL) goto end; - - if (ret == NULL) - ret = BN_new(); - if (ret == NULL) goto end; - - /* A = a mod p */ - if (!BN_nnmod(A, a, p, ctx)) goto end; - - /* now write |p| - 1 as 2^e*q where q is odd */ - e = 1; - while (!BN_is_bit_set(p, e)) - e++; - /* we'll set q later (if needed) */ - - if (e == 1) - { - /* The easy case: (|p|-1)/2 is odd, so 2 has an inverse - * modulo (|p|-1)/2, and square roots can be computed - * directly by modular exponentiation. - * We have - * 2 * (|p|+1)/4 == 1 (mod (|p|-1)/2), - * so we can use exponent (|p|+1)/4, i.e. (|p|-3)/4 + 1. - */ - if (!BN_rshift(q, p, 2)) goto end; - q->neg = 0; - if (!BN_add_word(q, 1)) goto end; - if (!BN_mod_exp(ret, A, q, p, ctx)) goto end; - err = 0; - goto vrfy; - } - - if (e == 2) - { - /* |p| == 5 (mod 8) - * - * In this case 2 is always a non-square since - * Legendre(2,p) = (-1)^((p^2-1)/8) for any odd prime. - * So if a really is a square, then 2*a is a non-square. - * Thus for - * b := (2*a)^((|p|-5)/8), - * i := (2*a)*b^2 - * we have - * i^2 = (2*a)^((1 + (|p|-5)/4)*2) - * = (2*a)^((p-1)/2) - * = -1; - * so if we set - * x := a*b*(i-1), - * then - * x^2 = a^2 * b^2 * (i^2 - 2*i + 1) - * = a^2 * b^2 * (-2*i) - * = a*(-i)*(2*a*b^2) - * = a*(-i)*i - * = a. - * - * (This is due to A.O.L. Atkin, - * <URL: http://listserv.nodak.edu/scripts/wa.exe?A2=ind9211&L=nmbrthry&O=T&P=562>, - * November 1992.) - */ - - /* t := 2*a */ - if (!BN_mod_lshift1_quick(t, A, p)) goto end; - - /* b := (2*a)^((|p|-5)/8) */ - if (!BN_rshift(q, p, 3)) goto end; - q->neg = 0; - if (!BN_mod_exp(b, t, q, p, ctx)) goto end; - - /* y := b^2 */ - if (!BN_mod_sqr(y, b, p, ctx)) goto end; - - /* t := (2*a)*b^2 - 1*/ - if (!BN_mod_mul(t, t, y, p, ctx)) goto end; - if (!BN_sub_word(t, 1)) goto end; - - /* x = a*b*t */ - if (!BN_mod_mul(x, A, b, p, ctx)) goto end; - if (!BN_mod_mul(x, x, t, p, ctx)) goto end; - - if (!BN_copy(ret, x)) goto end; - err = 0; - goto vrfy; - } - - /* e > 2, so we really have to use the Tonelli/Shanks algorithm. - * First, find some y that is not a square. */ - if (!BN_copy(q, p)) goto end; /* use 'q' as temp */ - q->neg = 0; - i = 2; - do - { - /* For efficiency, try small numbers first; - * if this fails, try random numbers. - */ - if (i < 22) - { - if (!BN_set_word(y, i)) goto end; - } - else - { - if (!BN_pseudo_rand(y, BN_num_bits(p), 0, 0)) goto end; - if (BN_ucmp(y, p) >= 0) - { - if (!(p->neg ? BN_add : BN_sub)(y, y, p)) goto end; - } - /* now 0 <= y < |p| */ - if (BN_is_zero(y)) - if (!BN_set_word(y, i)) goto end; - } - - r = BN_kronecker(y, q, ctx); /* here 'q' is |p| */ - if (r < -1) goto end; - if (r == 0) - { - /* m divides p */ - BNerr(BN_F_BN_MOD_SQRT, BN_R_P_IS_NOT_PRIME); - goto end; - } - } - while (r == 1 && ++i < 82); - - if (r != -1) - { - /* Many rounds and still no non-square -- this is more likely - * a bug than just bad luck. - * Even if p is not prime, we should have found some y - * such that r == -1. - */ - BNerr(BN_F_BN_MOD_SQRT, BN_R_TOO_MANY_ITERATIONS); - goto end; - } - - /* Here's our actual 'q': */ - if (!BN_rshift(q, q, e)) goto end; - - /* Now that we have some non-square, we can find an element - * of order 2^e by computing its q'th power. */ - if (!BN_mod_exp(y, y, q, p, ctx)) goto end; - if (BN_is_one(y)) - { - BNerr(BN_F_BN_MOD_SQRT, BN_R_P_IS_NOT_PRIME); - goto end; - } - - /* Now we know that (if p is indeed prime) there is an integer - * k, 0 <= k < 2^e, such that - * - * a^q * y^k == 1 (mod p). - * - * As a^q is a square and y is not, k must be even. - * q+1 is even, too, so there is an element - * - * X := a^((q+1)/2) * y^(k/2), - * - * and it satisfies - * - * X^2 = a^q * a * y^k - * = a, - * - * so it is the square root that we are looking for. - */ - - /* t := (q-1)/2 (note that q is odd) */ - if (!BN_rshift1(t, q)) goto end; - - /* x := a^((q-1)/2) */ - if (BN_is_zero(t)) /* special case: p = 2^e + 1 */ - { - if (!BN_nnmod(t, A, p, ctx)) goto end; - if (BN_is_zero(t)) - { - /* special case: a == 0 (mod p) */ - BN_zero(ret); - err = 0; - goto end; - } - else - if (!BN_one(x)) goto end; - } - else - { - if (!BN_mod_exp(x, A, t, p, ctx)) goto end; - if (BN_is_zero(x)) - { - /* special case: a == 0 (mod p) */ - BN_zero(ret); - err = 0; - goto end; - } - } - - /* b := a*x^2 (= a^q) */ - if (!BN_mod_sqr(b, x, p, ctx)) goto end; - if (!BN_mod_mul(b, b, A, p, ctx)) goto end; - - /* x := a*x (= a^((q+1)/2)) */ - if (!BN_mod_mul(x, x, A, p, ctx)) goto end; - - while (1) - { - /* Now b is a^q * y^k for some even k (0 <= k < 2^E - * where E refers to the original value of e, which we - * don't keep in a variable), and x is a^((q+1)/2) * y^(k/2). - * - * We have a*b = x^2, - * y^2^(e-1) = -1, - * b^2^(e-1) = 1. - */ - - if (BN_is_one(b)) - { - if (!BN_copy(ret, x)) goto end; - err = 0; - goto vrfy; - } - - - /* find smallest i such that b^(2^i) = 1 */ - i = 1; - if (!BN_mod_sqr(t, b, p, ctx)) goto end; - while (!BN_is_one(t)) - { - i++; - if (i == e) - { - BNerr(BN_F_BN_MOD_SQRT, BN_R_NOT_A_SQUARE); - goto end; - } - if (!BN_mod_mul(t, t, t, p, ctx)) goto end; - } - - - /* t := y^2^(e - i - 1) */ - if (!BN_copy(t, y)) goto end; - for (j = e - i - 1; j > 0; j--) - { - if (!BN_mod_sqr(t, t, p, ctx)) goto end; - } - if (!BN_mod_mul(y, t, t, p, ctx)) goto end; - if (!BN_mod_mul(x, x, t, p, ctx)) goto end; - if (!BN_mod_mul(b, b, y, p, ctx)) goto end; - e = i; - } - - vrfy: - if (!err) - { - /* verify the result -- the input might have been not a square - * (test added in 0.9.8) */ - - if (!BN_mod_sqr(x, ret, p, ctx)) - err = 1; - - if (!err && 0 != BN_cmp(x, A)) - { - BNerr(BN_F_BN_MOD_SQRT, BN_R_NOT_A_SQUARE); - err = 1; - } - } - - end: - if (err) - { - if (ret != NULL && ret != in) - { - BN_clear_free(ret); - } - ret = NULL; - } - BN_CTX_end(ctx); - bn_check_top(ret); - return ret; - } diff --git a/app/openssl/crypto/bn/bn_word.c b/app/openssl/crypto/bn/bn_word.c deleted file mode 100644 index ee7b87c4..00000000 --- a/app/openssl/crypto/bn/bn_word.c +++ /dev/null @@ -1,247 +0,0 @@ -/* crypto/bn/bn_word.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include "cryptlib.h" -#include "bn_lcl.h" - -BN_ULONG BN_mod_word(const BIGNUM *a, BN_ULONG w) - { -#ifndef BN_LLONG - BN_ULONG ret=0; -#else - BN_ULLONG ret=0; -#endif - int i; - - if (w == 0) - return (BN_ULONG)-1; - - bn_check_top(a); - w&=BN_MASK2; - for (i=a->top-1; i>=0; i--) - { -#ifndef BN_LLONG - ret=((ret<<BN_BITS4)|((a->d[i]>>BN_BITS4)&BN_MASK2l))%w; - ret=((ret<<BN_BITS4)|(a->d[i]&BN_MASK2l))%w; -#else - ret=(BN_ULLONG)(((ret<<(BN_ULLONG)BN_BITS2)|a->d[i])% - (BN_ULLONG)w); -#endif - } - return((BN_ULONG)ret); - } - -BN_ULONG BN_div_word(BIGNUM *a, BN_ULONG w) - { - BN_ULONG ret = 0; - int i, j; - - bn_check_top(a); - w &= BN_MASK2; - - if (!w) - /* actually this an error (division by zero) */ - return (BN_ULONG)-1; - if (a->top == 0) - return 0; - - /* normalize input (so bn_div_words doesn't complain) */ - j = BN_BITS2 - BN_num_bits_word(w); - w <<= j; - if (!BN_lshift(a, a, j)) - return (BN_ULONG)-1; - - for (i=a->top-1; i>=0; i--) - { - BN_ULONG l,d; - - l=a->d[i]; - d=bn_div_words(ret,l,w); - ret=(l-((d*w)&BN_MASK2))&BN_MASK2; - a->d[i]=d; - } - if ((a->top > 0) && (a->d[a->top-1] == 0)) - a->top--; - ret >>= j; - bn_check_top(a); - return(ret); - } - -int BN_add_word(BIGNUM *a, BN_ULONG w) - { - BN_ULONG l; - int i; - - bn_check_top(a); - w &= BN_MASK2; - - /* degenerate case: w is zero */ - if (!w) return 1; - /* degenerate case: a is zero */ - if(BN_is_zero(a)) return BN_set_word(a, w); - /* handle 'a' when negative */ - if (a->neg) - { - a->neg=0; - i=BN_sub_word(a,w); - if (!BN_is_zero(a)) - a->neg=!(a->neg); - return(i); - } - /* Only expand (and risk failing) if it's possibly necessary */ - if (((BN_ULONG)(a->d[a->top - 1] + 1) == 0) && - (bn_wexpand(a,a->top+1) == NULL)) - return(0); - i=0; - for (;;) - { - if (i >= a->top) - l=w; - else - l=(a->d[i]+w)&BN_MASK2; - a->d[i]=l; - if (w > l) - w=1; - else - break; - i++; - } - if (i >= a->top) - a->top++; - bn_check_top(a); - return(1); - } - -int BN_sub_word(BIGNUM *a, BN_ULONG w) - { - int i; - - bn_check_top(a); - w &= BN_MASK2; - - /* degenerate case: w is zero */ - if (!w) return 1; - /* degenerate case: a is zero */ - if(BN_is_zero(a)) - { - i = BN_set_word(a,w); - if (i != 0) - BN_set_negative(a, 1); - return i; - } - /* handle 'a' when negative */ - if (a->neg) - { - a->neg=0; - i=BN_add_word(a,w); - a->neg=1; - return(i); - } - - if ((a->top == 1) && (a->d[0] < w)) - { - a->d[0]=w-a->d[0]; - a->neg=1; - return(1); - } - i=0; - for (;;) - { - if (a->d[i] >= w) - { - a->d[i]-=w; - break; - } - else - { - a->d[i]=(a->d[i]-w)&BN_MASK2; - i++; - w=1; - } - } - if ((a->d[i] == 0) && (i == (a->top-1))) - a->top--; - bn_check_top(a); - return(1); - } - -int BN_mul_word(BIGNUM *a, BN_ULONG w) - { - BN_ULONG ll; - - bn_check_top(a); - w&=BN_MASK2; - if (a->top) - { - if (w == 0) - BN_zero(a); - else - { - ll=bn_mul_words(a->d,a->d,a->top,w); - if (ll) - { - if (bn_wexpand(a,a->top+1) == NULL) return(0); - a->d[a->top++]=ll; - } - } - } - bn_check_top(a); - return(1); - } - diff --git a/app/openssl/crypto/bn/bnspeed.c b/app/openssl/crypto/bn/bnspeed.c deleted file mode 100644 index b554ac8c..00000000 --- a/app/openssl/crypto/bn/bnspeed.c +++ /dev/null @@ -1,233 +0,0 @@ -/* unused */ - -/* crypto/bn/bnspeed.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -/* most of this code has been pilfered from my libdes speed.c program */ - -#define BASENUM 1000000 -#undef PROG -#define PROG bnspeed_main - -#include <stdio.h> -#include <stdlib.h> -#include <signal.h> -#include <string.h> -#include <openssl/crypto.h> -#include <openssl/err.h> - -#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX) -#define TIMES -#endif - -#ifndef _IRIX -#include <time.h> -#endif -#ifdef TIMES -#include <sys/types.h> -#include <sys/times.h> -#endif - -/* Depending on the VMS version, the tms structure is perhaps defined. - The __TMS macro will show if it was. If it wasn't defined, we should - undefine TIMES, since that tells the rest of the program how things - should be handled. -- Richard Levitte */ -#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS) -#undef TIMES -#endif - -#ifndef TIMES -#include <sys/timeb.h> -#endif - -#if defined(sun) || defined(__ultrix) -#define _POSIX_SOURCE -#include <limits.h> -#include <sys/param.h> -#endif - -#include <openssl/bn.h> -#include <openssl/x509.h> - -/* The following if from times(3) man page. It may need to be changed */ -#ifndef HZ -# ifndef CLK_TCK -# ifndef _BSD_CLK_TCK_ /* FreeBSD hack */ -# define HZ 100.0 -# else /* _BSD_CLK_TCK_ */ -# define HZ ((double)_BSD_CLK_TCK_) -# endif -# else /* CLK_TCK */ -# define HZ ((double)CLK_TCK) -# endif -#endif - -#undef BUFSIZE -#define BUFSIZE ((long)1024*8) -int run=0; - -static double Time_F(int s); -#define START 0 -#define STOP 1 - -static double Time_F(int s) - { - double ret; -#ifdef TIMES - static struct tms tstart,tend; - - if (s == START) - { - times(&tstart); - return(0); - } - else - { - times(&tend); - ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ; - return((ret < 1e-3)?1e-3:ret); - } -#else /* !times() */ - static struct timeb tstart,tend; - long i; - - if (s == START) - { - ftime(&tstart); - return(0); - } - else - { - ftime(&tend); - i=(long)tend.millitm-(long)tstart.millitm; - ret=((double)(tend.time-tstart.time))+((double)i)/1000.0; - return((ret < 0.001)?0.001:ret); - } -#endif - } - -#define NUM_SIZES 5 -static int sizes[NUM_SIZES]={128,256,512,1024,2048}; -/*static int sizes[NUM_SIZES]={59,179,299,419,539}; */ - -void do_mul(BIGNUM *r,BIGNUM *a,BIGNUM *b,BN_CTX *ctx); - -int main(int argc, char **argv) - { - BN_CTX *ctx; - BIGNUM a,b,c; - - ctx=BN_CTX_new(); - BN_init(&a); - BN_init(&b); - BN_init(&c); - - do_mul(&a,&b,&c,ctx); - } - -void do_mul(BIGNUM *r, BIGNUM *a, BIGNUM *b, BN_CTX *ctx) - { - int i,j,k; - double tm; - long num; - - for (i=0; i<NUM_SIZES; i++) - { - num=BASENUM; - if (i) num/=(i*3); - BN_rand(a,sizes[i],1,0); - for (j=i; j<NUM_SIZES; j++) - { - BN_rand(b,sizes[j],1,0); - Time_F(START); - for (k=0; k<num; k++) - BN_mul(r,b,a,ctx); - tm=Time_F(STOP); - printf("mul %4d x %4d -> %8.3fms\n",sizes[i],sizes[j],tm*1000.0/num); - } - } - - for (i=0; i<NUM_SIZES; i++) - { - num=BASENUM; - if (i) num/=(i*3); - BN_rand(a,sizes[i],1,0); - Time_F(START); - for (k=0; k<num; k++) - BN_sqr(r,a,ctx); - tm=Time_F(STOP); - printf("sqr %4d x %4d -> %8.3fms\n",sizes[i],sizes[i],tm*1000.0/num); - } - - for (i=0; i<NUM_SIZES; i++) - { - num=BASENUM/10; - if (i) num/=(i*3); - BN_rand(a,sizes[i]-1,1,0); - for (j=i; j<NUM_SIZES; j++) - { - BN_rand(b,sizes[j],1,0); - Time_F(START); - for (k=0; k<100000; k++) - BN_div(r, NULL, b, a,ctx); - tm=Time_F(STOP); - printf("div %4d / %4d -> %8.3fms\n",sizes[j],sizes[i]-1,tm*1000.0/num); - } - } - } - diff --git a/app/openssl/crypto/bn/bntest.c b/app/openssl/crypto/bn/bntest.c deleted file mode 100644 index 0cd99c5b..00000000 --- a/app/openssl/crypto/bn/bntest.c +++ /dev/null @@ -1,2013 +0,0 @@ -/* crypto/bn/bntest.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ -/* ==================================================================== - * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. - * - * Portions of the attached software ("Contribution") are developed by - * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project. - * - * The Contribution is licensed pursuant to the Eric Young open source - * license provided above. - * - * The binary polynomial arithmetic software is originally written by - * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories. - * - */ - -/* Until the key-gen callbacks are modified to use newer prototypes, we allow - * deprecated functions for openssl-internal code */ -#ifdef OPENSSL_NO_DEPRECATED -#undef OPENSSL_NO_DEPRECATED -#endif - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> - -#include "e_os.h" - -#include <openssl/bio.h> -#include <openssl/bn.h> -#include <openssl/rand.h> -#include <openssl/x509.h> -#include <openssl/err.h> - -const int num0 = 100; /* number of tests */ -const int num1 = 50; /* additional tests for some functions */ -const int num2 = 5; /* number of tests for slow functions */ - -int test_add(BIO *bp); -int test_sub(BIO *bp); -int test_lshift1(BIO *bp); -int test_lshift(BIO *bp,BN_CTX *ctx,BIGNUM *a_); -int test_rshift1(BIO *bp); -int test_rshift(BIO *bp,BN_CTX *ctx); -int test_div(BIO *bp,BN_CTX *ctx); -int test_div_word(BIO *bp); -int test_div_recp(BIO *bp,BN_CTX *ctx); -int test_mul(BIO *bp); -int test_sqr(BIO *bp,BN_CTX *ctx); -int test_mont(BIO *bp,BN_CTX *ctx); -int test_mod(BIO *bp,BN_CTX *ctx); -int test_mod_mul(BIO *bp,BN_CTX *ctx); -int test_mod_exp(BIO *bp,BN_CTX *ctx); -int test_mod_exp_mont_consttime(BIO *bp,BN_CTX *ctx); -int test_exp(BIO *bp,BN_CTX *ctx); -int test_gf2m_add(BIO *bp); -int test_gf2m_mod(BIO *bp); -int test_gf2m_mod_mul(BIO *bp,BN_CTX *ctx); -int test_gf2m_mod_sqr(BIO *bp,BN_CTX *ctx); -int test_gf2m_mod_inv(BIO *bp,BN_CTX *ctx); -int test_gf2m_mod_div(BIO *bp,BN_CTX *ctx); -int test_gf2m_mod_exp(BIO *bp,BN_CTX *ctx); -int test_gf2m_mod_sqrt(BIO *bp,BN_CTX *ctx); -int test_gf2m_mod_solve_quad(BIO *bp,BN_CTX *ctx); -int test_kron(BIO *bp,BN_CTX *ctx); -int test_sqrt(BIO *bp,BN_CTX *ctx); -int rand_neg(void); -static int results=0; - -static unsigned char lst[]="\xC6\x4F\x43\x04\x2A\xEA\xCA\x6E\x58\x36\x80\x5B\xE8\xC9" -"\x9B\x04\x5D\x48\x36\xC2\xFD\x16\xC9\x64\xF0"; - -static const char rnd_seed[] = "string to make the random number generator think it has entropy"; - -static void message(BIO *out, char *m) - { - fprintf(stderr, "test %s\n", m); - BIO_puts(out, "print \"test "); - BIO_puts(out, m); - BIO_puts(out, "\\n\"\n"); - } - -int main(int argc, char *argv[]) - { - BN_CTX *ctx; - BIO *out; - char *outfile=NULL; - - results = 0; - - RAND_seed(rnd_seed, sizeof rnd_seed); /* or BN_generate_prime may fail */ - - argc--; - argv++; - while (argc >= 1) - { - if (strcmp(*argv,"-results") == 0) - results=1; - else if (strcmp(*argv,"-out") == 0) - { - if (--argc < 1) break; - outfile= *(++argv); - } - argc--; - argv++; - } - - - ctx=BN_CTX_new(); - if (ctx == NULL) EXIT(1); - - out=BIO_new(BIO_s_file()); - if (out == NULL) EXIT(1); - if (outfile == NULL) - { - BIO_set_fp(out,stdout,BIO_NOCLOSE); - } - else - { - if (!BIO_write_filename(out,outfile)) - { - perror(outfile); - EXIT(1); - } - } - - if (!results) - BIO_puts(out,"obase=16\nibase=16\n"); - - message(out,"BN_add"); - if (!test_add(out)) goto err; - (void)BIO_flush(out); - - message(out,"BN_sub"); - if (!test_sub(out)) goto err; - (void)BIO_flush(out); - - message(out,"BN_lshift1"); - if (!test_lshift1(out)) goto err; - (void)BIO_flush(out); - - message(out,"BN_lshift (fixed)"); - if (!test_lshift(out,ctx,BN_bin2bn(lst,sizeof(lst)-1,NULL))) - goto err; - (void)BIO_flush(out); - - message(out,"BN_lshift"); - if (!test_lshift(out,ctx,NULL)) goto err; - (void)BIO_flush(out); - - message(out,"BN_rshift1"); - if (!test_rshift1(out)) goto err; - (void)BIO_flush(out); - - message(out,"BN_rshift"); - if (!test_rshift(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_sqr"); - if (!test_sqr(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_mul"); - if (!test_mul(out)) goto err; - (void)BIO_flush(out); - - message(out,"BN_div"); - if (!test_div(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_div_word"); - if (!test_div_word(out)) goto err; - (void)BIO_flush(out); - - message(out,"BN_div_recp"); - if (!test_div_recp(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_mod"); - if (!test_mod(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_mod_mul"); - if (!test_mod_mul(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_mont"); - if (!test_mont(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_mod_exp"); - if (!test_mod_exp(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_mod_exp_mont_consttime"); - if (!test_mod_exp_mont_consttime(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_exp"); - if (!test_exp(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_kronecker"); - if (!test_kron(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_mod_sqrt"); - if (!test_sqrt(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_GF2m_add"); - if (!test_gf2m_add(out)) goto err; - (void)BIO_flush(out); - - message(out,"BN_GF2m_mod"); - if (!test_gf2m_mod(out)) goto err; - (void)BIO_flush(out); - - message(out,"BN_GF2m_mod_mul"); - if (!test_gf2m_mod_mul(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_GF2m_mod_sqr"); - if (!test_gf2m_mod_sqr(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_GF2m_mod_inv"); - if (!test_gf2m_mod_inv(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_GF2m_mod_div"); - if (!test_gf2m_mod_div(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_GF2m_mod_exp"); - if (!test_gf2m_mod_exp(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_GF2m_mod_sqrt"); - if (!test_gf2m_mod_sqrt(out,ctx)) goto err; - (void)BIO_flush(out); - - message(out,"BN_GF2m_mod_solve_quad"); - if (!test_gf2m_mod_solve_quad(out,ctx)) goto err; - (void)BIO_flush(out); - - BN_CTX_free(ctx); - BIO_free(out); - -/**/ - EXIT(0); -err: - BIO_puts(out,"1\n"); /* make sure the Perl script fed by bc notices - * the failure, see test_bn in test/Makefile.ssl*/ - (void)BIO_flush(out); - ERR_load_crypto_strings(); - ERR_print_errors_fp(stderr); - EXIT(1); - return(1); - } - -int test_add(BIO *bp) - { - BIGNUM a,b,c; - int i; - - BN_init(&a); - BN_init(&b); - BN_init(&c); - - BN_bntest_rand(&a,512,0,0); - for (i=0; i<num0; i++) - { - BN_bntest_rand(&b,450+i,0,0); - a.neg=rand_neg(); - b.neg=rand_neg(); - BN_add(&c,&a,&b); - if (bp != NULL) - { - if (!results) - { - BN_print(bp,&a); - BIO_puts(bp," + "); - BN_print(bp,&b); - BIO_puts(bp," - "); - } - BN_print(bp,&c); - BIO_puts(bp,"\n"); - } - a.neg=!a.neg; - b.neg=!b.neg; - BN_add(&c,&c,&b); - BN_add(&c,&c,&a); - if(!BN_is_zero(&c)) - { - fprintf(stderr,"Add test failed!\n"); - return 0; - } - } - BN_free(&a); - BN_free(&b); - BN_free(&c); - return(1); - } - -int test_sub(BIO *bp) - { - BIGNUM a,b,c; - int i; - - BN_init(&a); - BN_init(&b); - BN_init(&c); - - for (i=0; i<num0+num1; i++) - { - if (i < num1) - { - BN_bntest_rand(&a,512,0,0); - BN_copy(&b,&a); - if (BN_set_bit(&a,i)==0) return(0); - BN_add_word(&b,i); - } - else - { - BN_bntest_rand(&b,400+i-num1,0,0); - a.neg=rand_neg(); - b.neg=rand_neg(); - } - BN_sub(&c,&a,&b); - if (bp != NULL) - { - if (!results) - { - BN_print(bp,&a); - BIO_puts(bp," - "); - BN_print(bp,&b); - BIO_puts(bp," - "); - } - BN_print(bp,&c); - BIO_puts(bp,"\n"); - } - BN_add(&c,&c,&b); - BN_sub(&c,&c,&a); - if(!BN_is_zero(&c)) - { - fprintf(stderr,"Subtract test failed!\n"); - return 0; - } - } - BN_free(&a); - BN_free(&b); - BN_free(&c); - return(1); - } - -int test_div(BIO *bp, BN_CTX *ctx) - { - BIGNUM a,b,c,d,e; - int i; - - BN_init(&a); - BN_init(&b); - BN_init(&c); - BN_init(&d); - BN_init(&e); - - for (i=0; i<num0+num1; i++) - { - if (i < num1) - { - BN_bntest_rand(&a,400,0,0); - BN_copy(&b,&a); - BN_lshift(&a,&a,i); - BN_add_word(&a,i); - } - else - BN_bntest_rand(&b,50+3*(i-num1),0,0); - a.neg=rand_neg(); - b.neg=rand_neg(); - BN_div(&d,&c,&a,&b,ctx); - if (bp != NULL) - { - if (!results) - { - BN_print(bp,&a); - BIO_puts(bp," / "); - BN_print(bp,&b); - BIO_puts(bp," - "); - } - BN_print(bp,&d); - BIO_puts(bp,"\n"); - - if (!results) - { - BN_print(bp,&a); - BIO_puts(bp," % "); - BN_print(bp,&b); - BIO_puts(bp," - "); - } - BN_print(bp,&c); - BIO_puts(bp,"\n"); - } - BN_mul(&e,&d,&b,ctx); - BN_add(&d,&e,&c); - BN_sub(&d,&d,&a); - if(!BN_is_zero(&d)) - { - fprintf(stderr,"Division test failed!\n"); - return 0; - } - } - BN_free(&a); - BN_free(&b); - BN_free(&c); - BN_free(&d); - BN_free(&e); - return(1); - } - -static void print_word(BIO *bp,BN_ULONG w) - { -#ifdef SIXTY_FOUR_BIT - if (sizeof(w) > sizeof(unsigned long)) - { - unsigned long h=(unsigned long)(w>>32), - l=(unsigned long)(w); - - if (h) BIO_printf(bp,"%lX%08lX",h,l); - else BIO_printf(bp,"%lX",l); - return; - } -#endif - BIO_printf(bp,BN_HEX_FMT1,w); - } - -int test_div_word(BIO *bp) - { - BIGNUM a,b; - BN_ULONG r,s; - int i; - - BN_init(&a); - BN_init(&b); - - for (i=0; i<num0; i++) - { - do { - BN_bntest_rand(&a,512,-1,0); - BN_bntest_rand(&b,BN_BITS2,-1,0); - s = b.d[0]; - } while (!s); - - BN_copy(&b, &a); - r = BN_div_word(&b, s); - - if (bp != NULL) - { - if (!results) - { - BN_print(bp,&a); - BIO_puts(bp," / "); - print_word(bp,s); - BIO_puts(bp," - "); - } - BN_print(bp,&b); - BIO_puts(bp,"\n"); - - if (!results) - { - BN_print(bp,&a); - BIO_puts(bp," % "); - print_word(bp,s); - BIO_puts(bp," - "); - } - print_word(bp,r); - BIO_puts(bp,"\n"); - } - BN_mul_word(&b,s); - BN_add_word(&b,r); - BN_sub(&b,&a,&b); - if(!BN_is_zero(&b)) - { - fprintf(stderr,"Division (word) test failed!\n"); - return 0; - } - } - BN_free(&a); - BN_free(&b); - return(1); - } - -int test_div_recp(BIO *bp, BN_CTX *ctx) - { - BIGNUM a,b,c,d,e; - BN_RECP_CTX recp; - int i; - - BN_RECP_CTX_init(&recp); - BN_init(&a); - BN_init(&b); - BN_init(&c); - BN_init(&d); - BN_init(&e); - - for (i=0; i<num0+num1; i++) - { - if (i < num1) - { - BN_bntest_rand(&a,400,0,0); - BN_copy(&b,&a); - BN_lshift(&a,&a,i); - BN_add_word(&a,i); - } - else - BN_bntest_rand(&b,50+3*(i-num1),0,0); - a.neg=rand_neg(); - b.neg=rand_neg(); - BN_RECP_CTX_set(&recp,&b,ctx); - BN_div_recp(&d,&c,&a,&recp,ctx); - if (bp != NULL) - { - if (!results) - { - BN_print(bp,&a); - BIO_puts(bp," / "); - BN_print(bp,&b); - BIO_puts(bp," - "); - } - BN_print(bp,&d); - BIO_puts(bp,"\n"); - - if (!results) - { - BN_print(bp,&a); - BIO_puts(bp," % "); - BN_print(bp,&b); - BIO_puts(bp," - "); - } - BN_print(bp,&c); - BIO_puts(bp,"\n"); - } - BN_mul(&e,&d,&b,ctx); - BN_add(&d,&e,&c); - BN_sub(&d,&d,&a); - if(!BN_is_zero(&d)) - { - fprintf(stderr,"Reciprocal division test failed!\n"); - fprintf(stderr,"a="); - BN_print_fp(stderr,&a); - fprintf(stderr,"\nb="); - BN_print_fp(stderr,&b); - fprintf(stderr,"\n"); - return 0; - } - } - BN_free(&a); - BN_free(&b); - BN_free(&c); - BN_free(&d); - BN_free(&e); - BN_RECP_CTX_free(&recp); - return(1); - } - -int test_mul(BIO *bp) - { - BIGNUM a,b,c,d,e; - int i; - BN_CTX *ctx; - - ctx = BN_CTX_new(); - if (ctx == NULL) EXIT(1); - - BN_init(&a); - BN_init(&b); - BN_init(&c); - BN_init(&d); - BN_init(&e); - - for (i=0; i<num0+num1; i++) - { - if (i <= num1) - { - BN_bntest_rand(&a,100,0,0); - BN_bntest_rand(&b,100,0,0); - } - else - BN_bntest_rand(&b,i-num1,0,0); - a.neg=rand_neg(); - b.neg=rand_neg(); - BN_mul(&c,&a,&b,ctx); - if (bp != NULL) - { - if (!results) - { - BN_print(bp,&a); - BIO_puts(bp," * "); - BN_print(bp,&b); - BIO_puts(bp," - "); - } - BN_print(bp,&c); - BIO_puts(bp,"\n"); - } - BN_div(&d,&e,&c,&a,ctx); - BN_sub(&d,&d,&b); - if(!BN_is_zero(&d) || !BN_is_zero(&e)) - { - fprintf(stderr,"Multiplication test failed!\n"); - return 0; - } - } - BN_free(&a); - BN_free(&b); - BN_free(&c); - BN_free(&d); - BN_free(&e); - BN_CTX_free(ctx); - return(1); - } - -int test_sqr(BIO *bp, BN_CTX *ctx) - { - BIGNUM a,c,d,e; - int i; - - BN_init(&a); - BN_init(&c); - BN_init(&d); - BN_init(&e); - - for (i=0; i<num0; i++) - { - BN_bntest_rand(&a,40+i*10,0,0); - a.neg=rand_neg(); - BN_sqr(&c,&a,ctx); - if (bp != NULL) - { - if (!results) - { - BN_print(bp,&a); - BIO_puts(bp," * "); - BN_print(bp,&a); - BIO_puts(bp," - "); - } - BN_print(bp,&c); - BIO_puts(bp,"\n"); - } - BN_div(&d,&e,&c,&a,ctx); - BN_sub(&d,&d,&a); - if(!BN_is_zero(&d) || !BN_is_zero(&e)) - { - fprintf(stderr,"Square test failed!\n"); - return 0; - } - } - BN_free(&a); - BN_free(&c); - BN_free(&d); - BN_free(&e); - return(1); - } - -int test_mont(BIO *bp, BN_CTX *ctx) - { - BIGNUM a,b,c,d,A,B; - BIGNUM n; - int i; - BN_MONT_CTX *mont; - - BN_init(&a); - BN_init(&b); - BN_init(&c); - BN_init(&d); - BN_init(&A); - BN_init(&B); - BN_init(&n); - - mont=BN_MONT_CTX_new(); - if (mont == NULL) - return 0; - - BN_bntest_rand(&a,100,0,0); /**/ - BN_bntest_rand(&b,100,0,0); /**/ - for (i=0; i<num2; i++) - { - int bits = (200*(i+1))/num2; - - if (bits == 0) - continue; - BN_bntest_rand(&n,bits,0,1); - BN_MONT_CTX_set(mont,&n,ctx); - - BN_nnmod(&a,&a,&n,ctx); - BN_nnmod(&b,&b,&n,ctx); - - BN_to_montgomery(&A,&a,mont,ctx); - BN_to_montgomery(&B,&b,mont,ctx); - - BN_mod_mul_montgomery(&c,&A,&B,mont,ctx);/**/ - BN_from_montgomery(&A,&c,mont,ctx);/**/ - if (bp != NULL) - { - if (!results) - { -#ifdef undef -fprintf(stderr,"%d * %d %% %d\n", -BN_num_bits(&a), -BN_num_bits(&b), -BN_num_bits(mont->N)); -#endif - BN_print(bp,&a); - BIO_puts(bp," * "); - BN_print(bp,&b); - BIO_puts(bp," % "); - BN_print(bp,&(mont->N)); - BIO_puts(bp," - "); - } - BN_print(bp,&A); - BIO_puts(bp,"\n"); - } - BN_mod_mul(&d,&a,&b,&n,ctx); - BN_sub(&d,&d,&A); - if(!BN_is_zero(&d)) - { - fprintf(stderr,"Montgomery multiplication test failed!\n"); - return 0; - } - } - BN_MONT_CTX_free(mont); - BN_free(&a); - BN_free(&b); - BN_free(&c); - BN_free(&d); - BN_free(&A); - BN_free(&B); - BN_free(&n); - return(1); - } - -int test_mod(BIO *bp, BN_CTX *ctx) - { - BIGNUM *a,*b,*c,*d,*e; - int i; - - a=BN_new(); - b=BN_new(); - c=BN_new(); - d=BN_new(); - e=BN_new(); - - BN_bntest_rand(a,1024,0,0); /**/ - for (i=0; i<num0; i++) - { - BN_bntest_rand(b,450+i*10,0,0); /**/ - a->neg=rand_neg(); - b->neg=rand_neg(); - BN_mod(c,a,b,ctx);/**/ - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp," % "); - BN_print(bp,b); - BIO_puts(bp," - "); - } - BN_print(bp,c); - BIO_puts(bp,"\n"); - } - BN_div(d,e,a,b,ctx); - BN_sub(e,e,c); - if(!BN_is_zero(e)) - { - fprintf(stderr,"Modulo test failed!\n"); - return 0; - } - } - BN_free(a); - BN_free(b); - BN_free(c); - BN_free(d); - BN_free(e); - return(1); - } - -int test_mod_mul(BIO *bp, BN_CTX *ctx) - { - BIGNUM *a,*b,*c,*d,*e; - int i,j; - - a=BN_new(); - b=BN_new(); - c=BN_new(); - d=BN_new(); - e=BN_new(); - - for (j=0; j<3; j++) { - BN_bntest_rand(c,1024,0,0); /**/ - for (i=0; i<num0; i++) - { - BN_bntest_rand(a,475+i*10,0,0); /**/ - BN_bntest_rand(b,425+i*11,0,0); /**/ - a->neg=rand_neg(); - b->neg=rand_neg(); - if (!BN_mod_mul(e,a,b,c,ctx)) - { - unsigned long l; - - while ((l=ERR_get_error())) - fprintf(stderr,"ERROR:%s\n", - ERR_error_string(l,NULL)); - EXIT(1); - } - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp," * "); - BN_print(bp,b); - BIO_puts(bp," % "); - BN_print(bp,c); - if ((a->neg ^ b->neg) && !BN_is_zero(e)) - { - /* If (a*b) % c is negative, c must be added - * in order to obtain the normalized remainder - * (new with OpenSSL 0.9.7, previous versions of - * BN_mod_mul could generate negative results) - */ - BIO_puts(bp," + "); - BN_print(bp,c); - } - BIO_puts(bp," - "); - } - BN_print(bp,e); - BIO_puts(bp,"\n"); - } - BN_mul(d,a,b,ctx); - BN_sub(d,d,e); - BN_div(a,b,d,c,ctx); - if(!BN_is_zero(b)) - { - fprintf(stderr,"Modulo multiply test failed!\n"); - ERR_print_errors_fp(stderr); - return 0; - } - } - } - BN_free(a); - BN_free(b); - BN_free(c); - BN_free(d); - BN_free(e); - return(1); - } - -int test_mod_exp(BIO *bp, BN_CTX *ctx) - { - BIGNUM *a,*b,*c,*d,*e; - int i; - - a=BN_new(); - b=BN_new(); - c=BN_new(); - d=BN_new(); - e=BN_new(); - - BN_bntest_rand(c,30,0,1); /* must be odd for montgomery */ - for (i=0; i<num2; i++) - { - BN_bntest_rand(a,20+i*5,0,0); /**/ - BN_bntest_rand(b,2+i,0,0); /**/ - - if (!BN_mod_exp(d,a,b,c,ctx)) - return(0); - - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp," ^ "); - BN_print(bp,b); - BIO_puts(bp," % "); - BN_print(bp,c); - BIO_puts(bp," - "); - } - BN_print(bp,d); - BIO_puts(bp,"\n"); - } - BN_exp(e,a,b,ctx); - BN_sub(e,e,d); - BN_div(a,b,e,c,ctx); - if(!BN_is_zero(b)) - { - fprintf(stderr,"Modulo exponentiation test failed!\n"); - return 0; - } - } - BN_free(a); - BN_free(b); - BN_free(c); - BN_free(d); - BN_free(e); - return(1); - } - -int test_mod_exp_mont_consttime(BIO *bp, BN_CTX *ctx) - { - BIGNUM *a,*b,*c,*d,*e; - int i; - - a=BN_new(); - b=BN_new(); - c=BN_new(); - d=BN_new(); - e=BN_new(); - - BN_bntest_rand(c,30,0,1); /* must be odd for montgomery */ - for (i=0; i<num2; i++) - { - BN_bntest_rand(a,20+i*5,0,0); /**/ - BN_bntest_rand(b,2+i,0,0); /**/ - - if (!BN_mod_exp_mont_consttime(d,a,b,c,ctx,NULL)) - return(00); - - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp," ^ "); - BN_print(bp,b); - BIO_puts(bp," % "); - BN_print(bp,c); - BIO_puts(bp," - "); - } - BN_print(bp,d); - BIO_puts(bp,"\n"); - } - BN_exp(e,a,b,ctx); - BN_sub(e,e,d); - BN_div(a,b,e,c,ctx); - if(!BN_is_zero(b)) - { - fprintf(stderr,"Modulo exponentiation test failed!\n"); - return 0; - } - } - BN_free(a); - BN_free(b); - BN_free(c); - BN_free(d); - BN_free(e); - return(1); - } - -int test_exp(BIO *bp, BN_CTX *ctx) - { - BIGNUM *a,*b,*d,*e,*one; - int i; - - a=BN_new(); - b=BN_new(); - d=BN_new(); - e=BN_new(); - one=BN_new(); - BN_one(one); - - for (i=0; i<num2; i++) - { - BN_bntest_rand(a,20+i*5,0,0); /**/ - BN_bntest_rand(b,2+i,0,0); /**/ - - if (BN_exp(d,a,b,ctx) <= 0) - return(0); - - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp," ^ "); - BN_print(bp,b); - BIO_puts(bp," - "); - } - BN_print(bp,d); - BIO_puts(bp,"\n"); - } - BN_one(e); - for( ; !BN_is_zero(b) ; BN_sub(b,b,one)) - BN_mul(e,e,a,ctx); - BN_sub(e,e,d); - if(!BN_is_zero(e)) - { - fprintf(stderr,"Exponentiation test failed!\n"); - return 0; - } - } - BN_free(a); - BN_free(b); - BN_free(d); - BN_free(e); - BN_free(one); - return(1); - } - -int test_gf2m_add(BIO *bp) - { - BIGNUM a,b,c; - int i, ret = 0; - - BN_init(&a); - BN_init(&b); - BN_init(&c); - - for (i=0; i<num0; i++) - { - BN_rand(&a,512,0,0); - BN_copy(&b, BN_value_one()); - a.neg=rand_neg(); - b.neg=rand_neg(); - BN_GF2m_add(&c,&a,&b); -#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */ - if (bp != NULL) - { - if (!results) - { - BN_print(bp,&a); - BIO_puts(bp," ^ "); - BN_print(bp,&b); - BIO_puts(bp," = "); - } - BN_print(bp,&c); - BIO_puts(bp,"\n"); - } -#endif - /* Test that two added values have the correct parity. */ - if((BN_is_odd(&a) && BN_is_odd(&c)) || (!BN_is_odd(&a) && !BN_is_odd(&c))) - { - fprintf(stderr,"GF(2^m) addition test (a) failed!\n"); - goto err; - } - BN_GF2m_add(&c,&c,&c); - /* Test that c + c = 0. */ - if(!BN_is_zero(&c)) - { - fprintf(stderr,"GF(2^m) addition test (b) failed!\n"); - goto err; - } - } - ret = 1; - err: - BN_free(&a); - BN_free(&b); - BN_free(&c); - return ret; - } - -int test_gf2m_mod(BIO *bp) - { - BIGNUM *a,*b[2],*c,*d,*e; - int i, j, ret = 0; - int p0[] = {163,7,6,3,0,-1}; - int p1[] = {193,15,0,-1}; - - a=BN_new(); - b[0]=BN_new(); - b[1]=BN_new(); - c=BN_new(); - d=BN_new(); - e=BN_new(); - - BN_GF2m_arr2poly(p0, b[0]); - BN_GF2m_arr2poly(p1, b[1]); - - for (i=0; i<num0; i++) - { - BN_bntest_rand(a, 1024, 0, 0); - for (j=0; j < 2; j++) - { - BN_GF2m_mod(c, a, b[j]); -#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */ - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp," % "); - BN_print(bp,b[j]); - BIO_puts(bp," - "); - BN_print(bp,c); - BIO_puts(bp,"\n"); - } - } -#endif - BN_GF2m_add(d, a, c); - BN_GF2m_mod(e, d, b[j]); - /* Test that a + (a mod p) mod p == 0. */ - if(!BN_is_zero(e)) - { - fprintf(stderr,"GF(2^m) modulo test failed!\n"); - goto err; - } - } - } - ret = 1; - err: - BN_free(a); - BN_free(b[0]); - BN_free(b[1]); - BN_free(c); - BN_free(d); - BN_free(e); - return ret; - } - -int test_gf2m_mod_mul(BIO *bp,BN_CTX *ctx) - { - BIGNUM *a,*b[2],*c,*d,*e,*f,*g,*h; - int i, j, ret = 0; - int p0[] = {163,7,6,3,0,-1}; - int p1[] = {193,15,0,-1}; - - a=BN_new(); - b[0]=BN_new(); - b[1]=BN_new(); - c=BN_new(); - d=BN_new(); - e=BN_new(); - f=BN_new(); - g=BN_new(); - h=BN_new(); - - BN_GF2m_arr2poly(p0, b[0]); - BN_GF2m_arr2poly(p1, b[1]); - - for (i=0; i<num0; i++) - { - BN_bntest_rand(a, 1024, 0, 0); - BN_bntest_rand(c, 1024, 0, 0); - BN_bntest_rand(d, 1024, 0, 0); - for (j=0; j < 2; j++) - { - BN_GF2m_mod_mul(e, a, c, b[j], ctx); -#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */ - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp," * "); - BN_print(bp,c); - BIO_puts(bp," % "); - BN_print(bp,b[j]); - BIO_puts(bp," - "); - BN_print(bp,e); - BIO_puts(bp,"\n"); - } - } -#endif - BN_GF2m_add(f, a, d); - BN_GF2m_mod_mul(g, f, c, b[j], ctx); - BN_GF2m_mod_mul(h, d, c, b[j], ctx); - BN_GF2m_add(f, e, g); - BN_GF2m_add(f, f, h); - /* Test that (a+d)*c = a*c + d*c. */ - if(!BN_is_zero(f)) - { - fprintf(stderr,"GF(2^m) modular multiplication test failed!\n"); - goto err; - } - } - } - ret = 1; - err: - BN_free(a); - BN_free(b[0]); - BN_free(b[1]); - BN_free(c); - BN_free(d); - BN_free(e); - BN_free(f); - BN_free(g); - BN_free(h); - return ret; - } - -int test_gf2m_mod_sqr(BIO *bp,BN_CTX *ctx) - { - BIGNUM *a,*b[2],*c,*d; - int i, j, ret = 0; - int p0[] = {163,7,6,3,0,-1}; - int p1[] = {193,15,0,-1}; - - a=BN_new(); - b[0]=BN_new(); - b[1]=BN_new(); - c=BN_new(); - d=BN_new(); - - BN_GF2m_arr2poly(p0, b[0]); - BN_GF2m_arr2poly(p1, b[1]); - - for (i=0; i<num0; i++) - { - BN_bntest_rand(a, 1024, 0, 0); - for (j=0; j < 2; j++) - { - BN_GF2m_mod_sqr(c, a, b[j], ctx); - BN_copy(d, a); - BN_GF2m_mod_mul(d, a, d, b[j], ctx); -#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */ - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp," ^ 2 % "); - BN_print(bp,b[j]); - BIO_puts(bp, " = "); - BN_print(bp,c); - BIO_puts(bp,"; a * a = "); - BN_print(bp,d); - BIO_puts(bp,"\n"); - } - } -#endif - BN_GF2m_add(d, c, d); - /* Test that a*a = a^2. */ - if(!BN_is_zero(d)) - { - fprintf(stderr,"GF(2^m) modular squaring test failed!\n"); - goto err; - } - } - } - ret = 1; - err: - BN_free(a); - BN_free(b[0]); - BN_free(b[1]); - BN_free(c); - BN_free(d); - return ret; - } - -int test_gf2m_mod_inv(BIO *bp,BN_CTX *ctx) - { - BIGNUM *a,*b[2],*c,*d; - int i, j, ret = 0; - int p0[] = {163,7,6,3,0,-1}; - int p1[] = {193,15,0,-1}; - - a=BN_new(); - b[0]=BN_new(); - b[1]=BN_new(); - c=BN_new(); - d=BN_new(); - - BN_GF2m_arr2poly(p0, b[0]); - BN_GF2m_arr2poly(p1, b[1]); - - for (i=0; i<num0; i++) - { - BN_bntest_rand(a, 512, 0, 0); - for (j=0; j < 2; j++) - { - BN_GF2m_mod_inv(c, a, b[j], ctx); - BN_GF2m_mod_mul(d, a, c, b[j], ctx); -#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */ - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp, " * "); - BN_print(bp,c); - BIO_puts(bp," - 1 % "); - BN_print(bp,b[j]); - BIO_puts(bp,"\n"); - } - } -#endif - /* Test that ((1/a)*a) = 1. */ - if(!BN_is_one(d)) - { - fprintf(stderr,"GF(2^m) modular inversion test failed!\n"); - goto err; - } - } - } - ret = 1; - err: - BN_free(a); - BN_free(b[0]); - BN_free(b[1]); - BN_free(c); - BN_free(d); - return ret; - } - -int test_gf2m_mod_div(BIO *bp,BN_CTX *ctx) - { - BIGNUM *a,*b[2],*c,*d,*e,*f; - int i, j, ret = 0; - int p0[] = {163,7,6,3,0,-1}; - int p1[] = {193,15,0,-1}; - - a=BN_new(); - b[0]=BN_new(); - b[1]=BN_new(); - c=BN_new(); - d=BN_new(); - e=BN_new(); - f=BN_new(); - - BN_GF2m_arr2poly(p0, b[0]); - BN_GF2m_arr2poly(p1, b[1]); - - for (i=0; i<num0; i++) - { - BN_bntest_rand(a, 512, 0, 0); - BN_bntest_rand(c, 512, 0, 0); - for (j=0; j < 2; j++) - { - BN_GF2m_mod_div(d, a, c, b[j], ctx); - BN_GF2m_mod_mul(e, d, c, b[j], ctx); - BN_GF2m_mod_div(f, a, e, b[j], ctx); -#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */ - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp, " = "); - BN_print(bp,c); - BIO_puts(bp," * "); - BN_print(bp,d); - BIO_puts(bp, " % "); - BN_print(bp,b[j]); - BIO_puts(bp,"\n"); - } - } -#endif - /* Test that ((a/c)*c)/a = 1. */ - if(!BN_is_one(f)) - { - fprintf(stderr,"GF(2^m) modular division test failed!\n"); - goto err; - } - } - } - ret = 1; - err: - BN_free(a); - BN_free(b[0]); - BN_free(b[1]); - BN_free(c); - BN_free(d); - BN_free(e); - BN_free(f); - return ret; - } - -int test_gf2m_mod_exp(BIO *bp,BN_CTX *ctx) - { - BIGNUM *a,*b[2],*c,*d,*e,*f; - int i, j, ret = 0; - int p0[] = {163,7,6,3,0,-1}; - int p1[] = {193,15,0,-1}; - - a=BN_new(); - b[0]=BN_new(); - b[1]=BN_new(); - c=BN_new(); - d=BN_new(); - e=BN_new(); - f=BN_new(); - - BN_GF2m_arr2poly(p0, b[0]); - BN_GF2m_arr2poly(p1, b[1]); - - for (i=0; i<num0; i++) - { - BN_bntest_rand(a, 512, 0, 0); - BN_bntest_rand(c, 512, 0, 0); - BN_bntest_rand(d, 512, 0, 0); - for (j=0; j < 2; j++) - { - BN_GF2m_mod_exp(e, a, c, b[j], ctx); - BN_GF2m_mod_exp(f, a, d, b[j], ctx); - BN_GF2m_mod_mul(e, e, f, b[j], ctx); - BN_add(f, c, d); - BN_GF2m_mod_exp(f, a, f, b[j], ctx); -#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */ - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp, " ^ ("); - BN_print(bp,c); - BIO_puts(bp," + "); - BN_print(bp,d); - BIO_puts(bp, ") = "); - BN_print(bp,e); - BIO_puts(bp, "; - "); - BN_print(bp,f); - BIO_puts(bp, " % "); - BN_print(bp,b[j]); - BIO_puts(bp,"\n"); - } - } -#endif - BN_GF2m_add(f, e, f); - /* Test that a^(c+d)=a^c*a^d. */ - if(!BN_is_zero(f)) - { - fprintf(stderr,"GF(2^m) modular exponentiation test failed!\n"); - goto err; - } - } - } - ret = 1; - err: - BN_free(a); - BN_free(b[0]); - BN_free(b[1]); - BN_free(c); - BN_free(d); - BN_free(e); - BN_free(f); - return ret; - } - -int test_gf2m_mod_sqrt(BIO *bp,BN_CTX *ctx) - { - BIGNUM *a,*b[2],*c,*d,*e,*f; - int i, j, ret = 0; - int p0[] = {163,7,6,3,0,-1}; - int p1[] = {193,15,0,-1}; - - a=BN_new(); - b[0]=BN_new(); - b[1]=BN_new(); - c=BN_new(); - d=BN_new(); - e=BN_new(); - f=BN_new(); - - BN_GF2m_arr2poly(p0, b[0]); - BN_GF2m_arr2poly(p1, b[1]); - - for (i=0; i<num0; i++) - { - BN_bntest_rand(a, 512, 0, 0); - for (j=0; j < 2; j++) - { - BN_GF2m_mod(c, a, b[j]); - BN_GF2m_mod_sqrt(d, a, b[j], ctx); - BN_GF2m_mod_sqr(e, d, b[j], ctx); -#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */ - if (bp != NULL) - { - if (!results) - { - BN_print(bp,d); - BIO_puts(bp, " ^ 2 - "); - BN_print(bp,a); - BIO_puts(bp,"\n"); - } - } -#endif - BN_GF2m_add(f, c, e); - /* Test that d^2 = a, where d = sqrt(a). */ - if(!BN_is_zero(f)) - { - fprintf(stderr,"GF(2^m) modular square root test failed!\n"); - goto err; - } - } - } - ret = 1; - err: - BN_free(a); - BN_free(b[0]); - BN_free(b[1]); - BN_free(c); - BN_free(d); - BN_free(e); - BN_free(f); - return ret; - } - -int test_gf2m_mod_solve_quad(BIO *bp,BN_CTX *ctx) - { - BIGNUM *a,*b[2],*c,*d,*e; - int i, j, s = 0, t, ret = 0; - int p0[] = {163,7,6,3,0,-1}; - int p1[] = {193,15,0,-1}; - - a=BN_new(); - b[0]=BN_new(); - b[1]=BN_new(); - c=BN_new(); - d=BN_new(); - e=BN_new(); - - BN_GF2m_arr2poly(p0, b[0]); - BN_GF2m_arr2poly(p1, b[1]); - - for (i=0; i<num0; i++) - { - BN_bntest_rand(a, 512, 0, 0); - for (j=0; j < 2; j++) - { - t = BN_GF2m_mod_solve_quad(c, a, b[j], ctx); - if (t) - { - s++; - BN_GF2m_mod_sqr(d, c, b[j], ctx); - BN_GF2m_add(d, c, d); - BN_GF2m_mod(e, a, b[j]); -#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */ - if (bp != NULL) - { - if (!results) - { - BN_print(bp,c); - BIO_puts(bp, " is root of z^2 + z = "); - BN_print(bp,a); - BIO_puts(bp, " % "); - BN_print(bp,b[j]); - BIO_puts(bp, "\n"); - } - } -#endif - BN_GF2m_add(e, e, d); - /* Test that solution of quadratic c satisfies c^2 + c = a. */ - if(!BN_is_zero(e)) - { - fprintf(stderr,"GF(2^m) modular solve quadratic test failed!\n"); - goto err; - } - - } - else - { -#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */ - if (bp != NULL) - { - if (!results) - { - BIO_puts(bp, "There are no roots of z^2 + z = "); - BN_print(bp,a); - BIO_puts(bp, " % "); - BN_print(bp,b[j]); - BIO_puts(bp, "\n"); - } - } -#endif - } - } - } - if (s == 0) - { - fprintf(stderr,"All %i tests of GF(2^m) modular solve quadratic resulted in no roots;\n", num0); - fprintf(stderr,"this is very unlikely and probably indicates an error.\n"); - goto err; - } - ret = 1; - err: - BN_free(a); - BN_free(b[0]); - BN_free(b[1]); - BN_free(c); - BN_free(d); - BN_free(e); - return ret; - } - -static int genprime_cb(int p, int n, BN_GENCB *arg) - { - char c='*'; - - if (p == 0) c='.'; - if (p == 1) c='+'; - if (p == 2) c='*'; - if (p == 3) c='\n'; - putc(c, stderr); - fflush(stderr); - return 1; - } - -int test_kron(BIO *bp, BN_CTX *ctx) - { - BN_GENCB cb; - BIGNUM *a,*b,*r,*t; - int i; - int legendre, kronecker; - int ret = 0; - - a = BN_new(); - b = BN_new(); - r = BN_new(); - t = BN_new(); - if (a == NULL || b == NULL || r == NULL || t == NULL) goto err; - - BN_GENCB_set(&cb, genprime_cb, NULL); - - /* We test BN_kronecker(a, b, ctx) just for b odd (Jacobi symbol). - * In this case we know that if b is prime, then BN_kronecker(a, b, ctx) - * is congruent to $a^{(b-1)/2}$, modulo $b$ (Legendre symbol). - * So we generate a random prime b and compare these values - * for a number of random a's. (That is, we run the Solovay-Strassen - * primality test to confirm that b is prime, except that we - * don't want to test whether b is prime but whether BN_kronecker - * works.) */ - - if (!BN_generate_prime_ex(b, 512, 0, NULL, NULL, &cb)) goto err; - b->neg = rand_neg(); - putc('\n', stderr); - - for (i = 0; i < num0; i++) - { - if (!BN_bntest_rand(a, 512, 0, 0)) goto err; - a->neg = rand_neg(); - - /* t := (|b|-1)/2 (note that b is odd) */ - if (!BN_copy(t, b)) goto err; - t->neg = 0; - if (!BN_sub_word(t, 1)) goto err; - if (!BN_rshift1(t, t)) goto err; - /* r := a^t mod b */ - b->neg=0; - - if (!BN_mod_exp_recp(r, a, t, b, ctx)) goto err; - b->neg=1; - - if (BN_is_word(r, 1)) - legendre = 1; - else if (BN_is_zero(r)) - legendre = 0; - else - { - if (!BN_add_word(r, 1)) goto err; - if (0 != BN_ucmp(r, b)) - { - fprintf(stderr, "Legendre symbol computation failed\n"); - goto err; - } - legendre = -1; - } - - kronecker = BN_kronecker(a, b, ctx); - if (kronecker < -1) goto err; - /* we actually need BN_kronecker(a, |b|) */ - if (a->neg && b->neg) - kronecker = -kronecker; - - if (legendre != kronecker) - { - fprintf(stderr, "legendre != kronecker; a = "); - BN_print_fp(stderr, a); - fprintf(stderr, ", b = "); - BN_print_fp(stderr, b); - fprintf(stderr, "\n"); - goto err; - } - - putc('.', stderr); - fflush(stderr); - } - - putc('\n', stderr); - fflush(stderr); - ret = 1; - err: - if (a != NULL) BN_free(a); - if (b != NULL) BN_free(b); - if (r != NULL) BN_free(r); - if (t != NULL) BN_free(t); - return ret; - } - -int test_sqrt(BIO *bp, BN_CTX *ctx) - { - BN_GENCB cb; - BIGNUM *a,*p,*r; - int i, j; - int ret = 0; - - a = BN_new(); - p = BN_new(); - r = BN_new(); - if (a == NULL || p == NULL || r == NULL) goto err; - - BN_GENCB_set(&cb, genprime_cb, NULL); - - for (i = 0; i < 16; i++) - { - if (i < 8) - { - unsigned primes[8] = { 2, 3, 5, 7, 11, 13, 17, 19 }; - - if (!BN_set_word(p, primes[i])) goto err; - } - else - { - if (!BN_set_word(a, 32)) goto err; - if (!BN_set_word(r, 2*i + 1)) goto err; - - if (!BN_generate_prime_ex(p, 256, 0, a, r, &cb)) goto err; - putc('\n', stderr); - } - p->neg = rand_neg(); - - for (j = 0; j < num2; j++) - { - /* construct 'a' such that it is a square modulo p, - * but in general not a proper square and not reduced modulo p */ - if (!BN_bntest_rand(r, 256, 0, 3)) goto err; - if (!BN_nnmod(r, r, p, ctx)) goto err; - if (!BN_mod_sqr(r, r, p, ctx)) goto err; - if (!BN_bntest_rand(a, 256, 0, 3)) goto err; - if (!BN_nnmod(a, a, p, ctx)) goto err; - if (!BN_mod_sqr(a, a, p, ctx)) goto err; - if (!BN_mul(a, a, r, ctx)) goto err; - if (rand_neg()) - if (!BN_sub(a, a, p)) goto err; - - if (!BN_mod_sqrt(r, a, p, ctx)) goto err; - if (!BN_mod_sqr(r, r, p, ctx)) goto err; - - if (!BN_nnmod(a, a, p, ctx)) goto err; - - if (BN_cmp(a, r) != 0) - { - fprintf(stderr, "BN_mod_sqrt failed: a = "); - BN_print_fp(stderr, a); - fprintf(stderr, ", r = "); - BN_print_fp(stderr, r); - fprintf(stderr, ", p = "); - BN_print_fp(stderr, p); - fprintf(stderr, "\n"); - goto err; - } - - putc('.', stderr); - fflush(stderr); - } - - putc('\n', stderr); - fflush(stderr); - } - ret = 1; - err: - if (a != NULL) BN_free(a); - if (p != NULL) BN_free(p); - if (r != NULL) BN_free(r); - return ret; - } - -int test_lshift(BIO *bp,BN_CTX *ctx,BIGNUM *a_) - { - BIGNUM *a,*b,*c,*d; - int i; - - b=BN_new(); - c=BN_new(); - d=BN_new(); - BN_one(c); - - if(a_) - a=a_; - else - { - a=BN_new(); - BN_bntest_rand(a,200,0,0); /**/ - a->neg=rand_neg(); - } - for (i=0; i<num0; i++) - { - BN_lshift(b,a,i+1); - BN_add(c,c,c); - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp," * "); - BN_print(bp,c); - BIO_puts(bp," - "); - } - BN_print(bp,b); - BIO_puts(bp,"\n"); - } - BN_mul(d,a,c,ctx); - BN_sub(d,d,b); - if(!BN_is_zero(d)) - { - fprintf(stderr,"Left shift test failed!\n"); - fprintf(stderr,"a="); - BN_print_fp(stderr,a); - fprintf(stderr,"\nb="); - BN_print_fp(stderr,b); - fprintf(stderr,"\nc="); - BN_print_fp(stderr,c); - fprintf(stderr,"\nd="); - BN_print_fp(stderr,d); - fprintf(stderr,"\n"); - return 0; - } - } - BN_free(a); - BN_free(b); - BN_free(c); - BN_free(d); - return(1); - } - -int test_lshift1(BIO *bp) - { - BIGNUM *a,*b,*c; - int i; - - a=BN_new(); - b=BN_new(); - c=BN_new(); - - BN_bntest_rand(a,200,0,0); /**/ - a->neg=rand_neg(); - for (i=0; i<num0; i++) - { - BN_lshift1(b,a); - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp," * 2"); - BIO_puts(bp," - "); - } - BN_print(bp,b); - BIO_puts(bp,"\n"); - } - BN_add(c,a,a); - BN_sub(a,b,c); - if(!BN_is_zero(a)) - { - fprintf(stderr,"Left shift one test failed!\n"); - return 0; - } - - BN_copy(a,b); - } - BN_free(a); - BN_free(b); - BN_free(c); - return(1); - } - -int test_rshift(BIO *bp,BN_CTX *ctx) - { - BIGNUM *a,*b,*c,*d,*e; - int i; - - a=BN_new(); - b=BN_new(); - c=BN_new(); - d=BN_new(); - e=BN_new(); - BN_one(c); - - BN_bntest_rand(a,200,0,0); /**/ - a->neg=rand_neg(); - for (i=0; i<num0; i++) - { - BN_rshift(b,a,i+1); - BN_add(c,c,c); - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp," / "); - BN_print(bp,c); - BIO_puts(bp," - "); - } - BN_print(bp,b); - BIO_puts(bp,"\n"); - } - BN_div(d,e,a,c,ctx); - BN_sub(d,d,b); - if(!BN_is_zero(d)) - { - fprintf(stderr,"Right shift test failed!\n"); - return 0; - } - } - BN_free(a); - BN_free(b); - BN_free(c); - BN_free(d); - BN_free(e); - return(1); - } - -int test_rshift1(BIO *bp) - { - BIGNUM *a,*b,*c; - int i; - - a=BN_new(); - b=BN_new(); - c=BN_new(); - - BN_bntest_rand(a,200,0,0); /**/ - a->neg=rand_neg(); - for (i=0; i<num0; i++) - { - BN_rshift1(b,a); - if (bp != NULL) - { - if (!results) - { - BN_print(bp,a); - BIO_puts(bp," / 2"); - BIO_puts(bp," - "); - } - BN_print(bp,b); - BIO_puts(bp,"\n"); - } - BN_sub(c,a,b); - BN_sub(c,c,b); - if(!BN_is_zero(c) && !BN_abs_is_word(c, 1)) - { - fprintf(stderr,"Right shift one test failed!\n"); - return 0; - } - BN_copy(a,b); - } - BN_free(a); - BN_free(b); - BN_free(c); - return(1); - } - -int rand_neg(void) - { - static unsigned int neg=0; - static int sign[8]={0,0,0,1,1,0,1,1}; - - return(sign[(neg++)%8]); - } diff --git a/app/openssl/crypto/bn/divtest.c b/app/openssl/crypto/bn/divtest.c deleted file mode 100644 index d3fc688f..00000000 --- a/app/openssl/crypto/bn/divtest.c +++ /dev/null @@ -1,41 +0,0 @@ -#include <openssl/bn.h> -#include <openssl/rand.h> - -static int Rand(n) -{ - unsigned char x[2]; - RAND_pseudo_bytes(x,2); - return (x[0] + 2*x[1]); -} - -static void bug(char *m, BIGNUM *a, BIGNUM *b) -{ - printf("%s!\na=",m); - BN_print_fp(stdout, a); - printf("\nb="); - BN_print_fp(stdout, b); - printf("\n"); - fflush(stdout); -} - -main() -{ - BIGNUM *a=BN_new(), *b=BN_new(), *c=BN_new(), *d=BN_new(), - *C=BN_new(), *D=BN_new(); - BN_RECP_CTX *recp=BN_RECP_CTX_new(); - BN_CTX *ctx=BN_CTX_new(); - - for(;;) { - BN_pseudo_rand(a,Rand(),0,0); - BN_pseudo_rand(b,Rand(),0,0); - if (BN_is_zero(b)) continue; - - BN_RECP_CTX_set(recp,b,ctx); - if (BN_div(C,D,a,b,ctx) != 1) - bug("BN_div failed",a,b); - if (BN_div_recp(c,d,a,recp,ctx) != 1) - bug("BN_div_recp failed",a,b); - else if (BN_cmp(c,C) != 0 || BN_cmp(c,C) != 0) - bug("mismatch",a,b); - } -} diff --git a/app/openssl/crypto/bn/exp.c b/app/openssl/crypto/bn/exp.c deleted file mode 100644 index 4865b0ef..00000000 --- a/app/openssl/crypto/bn/exp.c +++ /dev/null @@ -1,62 +0,0 @@ -/* unused */ - -#include <stdio.h> -#include <openssl/tmdiff.h> -#include "bn_lcl.h" - -#define SIZE 256 -#define NUM (8*8*8) -#define MOD (8*8*8*8*8) - -main(argc,argv) -int argc; -char *argv[]; - { - BN_CTX ctx; - BIGNUM a,b,c,r,rr,t,l; - int j,i,size=SIZE,num=NUM,mod=MOD; - char *start,*end; - BN_MONT_CTX mont; - double d,md; - - BN_MONT_CTX_init(&mont); - BN_CTX_init(&ctx); - BN_init(&a); - BN_init(&b); - BN_init(&c); - BN_init(&r); - - start=ms_time_new(); - end=ms_time_new(); - while (size <= 1024*8) - { - BN_rand(&a,size,0,0); - BN_rand(&b,size,1,0); - BN_rand(&c,size,0,1); - - BN_mod(&a,&a,&c,&ctx); - - ms_time_get(start); - for (i=0; i<10; i++) - BN_MONT_CTX_set(&mont,&c,&ctx); - ms_time_get(end); - md=ms_time_diff(start,end); - - ms_time_get(start); - for (i=0; i<num; i++) - { - /* bn_mull(&r,&a,&b,&ctx); */ - /* BN_sqr(&r,&a,&ctx); */ - BN_mod_exp_mont(&r,&a,&b,&c,&ctx,&mont); - } - ms_time_get(end); - d=ms_time_diff(start,end)/* *50/33 */; - printf("%5d bit:%6.2f %6d %6.4f %4d m_set(%5.4f)\n",size, - d,num,d/num,(int)((d/num)*mod),md/10.0); - num/=8; - mod/=8; - if (num <= 0) num=1; - size*=2; - } - - } diff --git a/app/openssl/crypto/bn/expspeed.c b/app/openssl/crypto/bn/expspeed.c deleted file mode 100644 index 4d5f221f..00000000 --- a/app/openssl/crypto/bn/expspeed.c +++ /dev/null @@ -1,353 +0,0 @@ -/* unused */ - -/* crypto/bn/expspeed.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -/* most of this code has been pilfered from my libdes speed.c program */ - -#define BASENUM 5000 -#define NUM_START 0 - - -/* determine timings for modexp, modmul, modsqr, gcd, Kronecker symbol, - * modular inverse, or modular square roots */ -#define TEST_EXP -#undef TEST_MUL -#undef TEST_SQR -#undef TEST_GCD -#undef TEST_KRON -#undef TEST_INV -#undef TEST_SQRT -#define P_MOD_64 9 /* least significant 6 bits for prime to be used for BN_sqrt timings */ - -#if defined(TEST_EXP) + defined(TEST_MUL) + defined(TEST_SQR) + defined(TEST_GCD) + defined(TEST_KRON) + defined(TEST_INV) +defined(TEST_SQRT) != 1 -# error "choose one test" -#endif - -#if defined(TEST_INV) || defined(TEST_SQRT) -# define C_PRIME -static void genprime_cb(int p, int n, void *arg); -#endif - - - -#undef PROG -#define PROG bnspeed_main - -#include <stdio.h> -#include <stdlib.h> -#include <signal.h> -#include <string.h> -#include <openssl/crypto.h> -#include <openssl/err.h> -#include <openssl/rand.h> - -#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX) -#define TIMES -#endif - -#ifndef _IRIX -#include <time.h> -#endif -#ifdef TIMES -#include <sys/types.h> -#include <sys/times.h> -#endif - -/* Depending on the VMS version, the tms structure is perhaps defined. - The __TMS macro will show if it was. If it wasn't defined, we should - undefine TIMES, since that tells the rest of the program how things - should be handled. -- Richard Levitte */ -#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS) -#undef TIMES -#endif - -#ifndef TIMES -#include <sys/timeb.h> -#endif - -#if defined(sun) || defined(__ultrix) -#define _POSIX_SOURCE -#include <limits.h> -#include <sys/param.h> -#endif - -#include <openssl/bn.h> -#include <openssl/x509.h> - -/* The following if from times(3) man page. It may need to be changed */ -#ifndef HZ -# ifndef CLK_TCK -# ifndef _BSD_CLK_TCK_ /* FreeBSD hack */ -# define HZ 100.0 -# else /* _BSD_CLK_TCK_ */ -# define HZ ((double)_BSD_CLK_TCK_) -# endif -# else /* CLK_TCK */ -# define HZ ((double)CLK_TCK) -# endif -#endif - -#undef BUFSIZE -#define BUFSIZE ((long)1024*8) -int run=0; - -static double Time_F(int s); -#define START 0 -#define STOP 1 - -static double Time_F(int s) - { - double ret; -#ifdef TIMES - static struct tms tstart,tend; - - if (s == START) - { - times(&tstart); - return(0); - } - else - { - times(&tend); - ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ; - return((ret < 1e-3)?1e-3:ret); - } -#else /* !times() */ - static struct timeb tstart,tend; - long i; - - if (s == START) - { - ftime(&tstart); - return(0); - } - else - { - ftime(&tend); - i=(long)tend.millitm-(long)tstart.millitm; - ret=((double)(tend.time-tstart.time))+((double)i)/1000.0; - return((ret < 0.001)?0.001:ret); - } -#endif - } - -#define NUM_SIZES 7 -#if NUM_START > NUM_SIZES -# error "NUM_START > NUM_SIZES" -#endif -static int sizes[NUM_SIZES]={128,256,512,1024,2048,4096,8192}; -static int mul_c[NUM_SIZES]={8*8*8*8*8*8,8*8*8*8*8,8*8*8*8,8*8*8,8*8,8,1}; -/*static int sizes[NUM_SIZES]={59,179,299,419,539}; */ - -#define RAND_SEED(string) { const char str[] = string; RAND_seed(string, sizeof str); } - -void do_mul_exp(BIGNUM *r,BIGNUM *a,BIGNUM *b,BIGNUM *c,BN_CTX *ctx); - -int main(int argc, char **argv) - { - BN_CTX *ctx; - BIGNUM *a,*b,*c,*r; - -#if 1 - if (!CRYPTO_set_mem_debug_functions(0,0,0,0,0)) - abort(); -#endif - - ctx=BN_CTX_new(); - a=BN_new(); - b=BN_new(); - c=BN_new(); - r=BN_new(); - - while (!RAND_status()) - /* not enough bits */ - RAND_SEED("I demand a manual recount!"); - - do_mul_exp(r,a,b,c,ctx); - return 0; - } - -void do_mul_exp(BIGNUM *r, BIGNUM *a, BIGNUM *b, BIGNUM *c, BN_CTX *ctx) - { - int i,k; - double tm; - long num; - - num=BASENUM; - for (i=NUM_START; i<NUM_SIZES; i++) - { -#ifdef C_PRIME -# ifdef TEST_SQRT - if (!BN_set_word(a, 64)) goto err; - if (!BN_set_word(b, P_MOD_64)) goto err; -# define ADD a -# define REM b -# else -# define ADD NULL -# define REM NULL -# endif - if (!BN_generate_prime(c,sizes[i],0,ADD,REM,genprime_cb,NULL)) goto err; - putc('\n', stderr); - fflush(stderr); -#endif - - for (k=0; k<num; k++) - { - if (k%50 == 0) /* Average over num/50 different choices of random numbers. */ - { - if (!BN_pseudo_rand(a,sizes[i],1,0)) goto err; - - if (!BN_pseudo_rand(b,sizes[i],1,0)) goto err; - -#ifndef C_PRIME - if (!BN_pseudo_rand(c,sizes[i],1,1)) goto err; -#endif - -#ifdef TEST_SQRT - if (!BN_mod_sqr(a,a,c,ctx)) goto err; - if (!BN_mod_sqr(b,b,c,ctx)) goto err; -#else - if (!BN_nnmod(a,a,c,ctx)) goto err; - if (!BN_nnmod(b,b,c,ctx)) goto err; -#endif - - if (k == 0) - Time_F(START); - } - -#if defined(TEST_EXP) - if (!BN_mod_exp(r,a,b,c,ctx)) goto err; -#elif defined(TEST_MUL) - { - int i = 0; - for (i = 0; i < 50; i++) - if (!BN_mod_mul(r,a,b,c,ctx)) goto err; - } -#elif defined(TEST_SQR) - { - int i = 0; - for (i = 0; i < 50; i++) - { - if (!BN_mod_sqr(r,a,c,ctx)) goto err; - if (!BN_mod_sqr(r,b,c,ctx)) goto err; - } - } -#elif defined(TEST_GCD) - if (!BN_gcd(r,a,b,ctx)) goto err; - if (!BN_gcd(r,b,c,ctx)) goto err; - if (!BN_gcd(r,c,a,ctx)) goto err; -#elif defined(TEST_KRON) - if (-2 == BN_kronecker(a,b,ctx)) goto err; - if (-2 == BN_kronecker(b,c,ctx)) goto err; - if (-2 == BN_kronecker(c,a,ctx)) goto err; -#elif defined(TEST_INV) - if (!BN_mod_inverse(r,a,c,ctx)) goto err; - if (!BN_mod_inverse(r,b,c,ctx)) goto err; -#else /* TEST_SQRT */ - if (!BN_mod_sqrt(r,a,c,ctx)) goto err; - if (!BN_mod_sqrt(r,b,c,ctx)) goto err; -#endif - } - tm=Time_F(STOP); - printf( -#if defined(TEST_EXP) - "modexp %4d ^ %4d %% %4d" -#elif defined(TEST_MUL) - "50*modmul %4d %4d %4d" -#elif defined(TEST_SQR) - "100*modsqr %4d %4d %4d" -#elif defined(TEST_GCD) - "3*gcd %4d %4d %4d" -#elif defined(TEST_KRON) - "3*kronecker %4d %4d %4d" -#elif defined(TEST_INV) - "2*inv %4d %4d mod %4d" -#else /* TEST_SQRT */ - "2*sqrt [prime == %d (mod 64)] %4d %4d mod %4d" -#endif - " -> %8.6fms %5.1f (%ld)\n", -#ifdef TEST_SQRT - P_MOD_64, -#endif - sizes[i],sizes[i],sizes[i],tm*1000.0/num,tm*mul_c[i]/num, num); - num/=7; - if (num <= 0) num=1; - } - return; - - err: - ERR_print_errors_fp(stderr); - } - - -#ifdef C_PRIME -static void genprime_cb(int p, int n, void *arg) - { - char c='*'; - - if (p == 0) c='.'; - if (p == 1) c='+'; - if (p == 2) c='*'; - if (p == 3) c='\n'; - putc(c, stderr); - fflush(stderr); - (void)n; - (void)arg; - } -#endif diff --git a/app/openssl/crypto/bn/exptest.c b/app/openssl/crypto/bn/exptest.c deleted file mode 100644 index 074a8e88..00000000 --- a/app/openssl/crypto/bn/exptest.c +++ /dev/null @@ -1,204 +0,0 @@ -/* crypto/bn/exptest.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> - -#include "../e_os.h" - -#include <openssl/bio.h> -#include <openssl/bn.h> -#include <openssl/rand.h> -#include <openssl/err.h> - -#define NUM_BITS (BN_BITS*2) - -static const char rnd_seed[] = "string to make the random number generator think it has entropy"; - -int main(int argc, char *argv[]) - { - BN_CTX *ctx; - BIO *out=NULL; - int i,ret; - unsigned char c; - BIGNUM *r_mont,*r_mont_const,*r_recp,*r_simple,*a,*b,*m; - - RAND_seed(rnd_seed, sizeof rnd_seed); /* or BN_rand may fail, and we don't - * even check its return value - * (which we should) */ - - ERR_load_BN_strings(); - - ctx=BN_CTX_new(); - if (ctx == NULL) EXIT(1); - r_mont=BN_new(); - r_mont_const=BN_new(); - r_recp=BN_new(); - r_simple=BN_new(); - a=BN_new(); - b=BN_new(); - m=BN_new(); - if ( (r_mont == NULL) || (r_recp == NULL) || - (a == NULL) || (b == NULL)) - goto err; - - out=BIO_new(BIO_s_file()); - - if (out == NULL) EXIT(1); - BIO_set_fp(out,stdout,BIO_NOCLOSE); - - for (i=0; i<200; i++) - { - RAND_bytes(&c,1); - c=(c%BN_BITS)-BN_BITS2; - BN_rand(a,NUM_BITS+c,0,0); - - RAND_bytes(&c,1); - c=(c%BN_BITS)-BN_BITS2; - BN_rand(b,NUM_BITS+c,0,0); - - RAND_bytes(&c,1); - c=(c%BN_BITS)-BN_BITS2; - BN_rand(m,NUM_BITS+c,0,1); - - BN_mod(a,a,m,ctx); - BN_mod(b,b,m,ctx); - - ret=BN_mod_exp_mont(r_mont,a,b,m,ctx,NULL); - if (ret <= 0) - { - printf("BN_mod_exp_mont() problems\n"); - ERR_print_errors(out); - EXIT(1); - } - - ret=BN_mod_exp_recp(r_recp,a,b,m,ctx); - if (ret <= 0) - { - printf("BN_mod_exp_recp() problems\n"); - ERR_print_errors(out); - EXIT(1); - } - - ret=BN_mod_exp_simple(r_simple,a,b,m,ctx); - if (ret <= 0) - { - printf("BN_mod_exp_simple() problems\n"); - ERR_print_errors(out); - EXIT(1); - } - - ret=BN_mod_exp_mont_consttime(r_mont_const,a,b,m,ctx,NULL); - if (ret <= 0) - { - printf("BN_mod_exp_mont_consttime() problems\n"); - ERR_print_errors(out); - EXIT(1); - } - - if (BN_cmp(r_simple, r_mont) == 0 - && BN_cmp(r_simple,r_recp) == 0 - && BN_cmp(r_simple,r_mont_const) == 0) - { - printf("."); - fflush(stdout); - } - else - { - if (BN_cmp(r_simple,r_mont) != 0) - printf("\nsimple and mont results differ\n"); - if (BN_cmp(r_simple,r_mont_const) != 0) - printf("\nsimple and mont const time results differ\n"); - if (BN_cmp(r_simple,r_recp) != 0) - printf("\nsimple and recp results differ\n"); - - printf("a (%3d) = ",BN_num_bits(a)); BN_print(out,a); - printf("\nb (%3d) = ",BN_num_bits(b)); BN_print(out,b); - printf("\nm (%3d) = ",BN_num_bits(m)); BN_print(out,m); - printf("\nsimple ="); BN_print(out,r_simple); - printf("\nrecp ="); BN_print(out,r_recp); - printf("\nmont ="); BN_print(out,r_mont); - printf("\nmont_ct ="); BN_print(out,r_mont_const); - printf("\n"); - EXIT(1); - } - } - BN_free(r_mont); - BN_free(r_mont_const); - BN_free(r_recp); - BN_free(r_simple); - BN_free(a); - BN_free(b); - BN_free(m); - BN_CTX_free(ctx); - ERR_remove_thread_state(NULL); - CRYPTO_mem_leaks(out); - BIO_free(out); - printf(" done\n"); - EXIT(0); -err: - ERR_load_crypto_strings(); - ERR_print_errors(out); -#ifdef OPENSSL_SYS_NETWARE - printf("ERROR\n"); -#endif - EXIT(1); - return(1); - } - diff --git a/app/openssl/crypto/bn/todo b/app/openssl/crypto/bn/todo deleted file mode 100644 index e47e381a..00000000 --- a/app/openssl/crypto/bn/todo +++ /dev/null @@ -1,3 +0,0 @@ -Cache RECP_CTX values -make the result argument independant of the inputs. -split up the _exp_ functions |