Next step: compile jni sources correctly.

16 files changed, 0 insertions, 973 deletions

diff --git a/openvpn/sample/sample-config-files/README b/openvpn/sample/sample-config-files/README
deleted file mode 100644
index d53ac79a..00000000
--- a/openvpn/sample/sample-config-files/README
+++ /dev/null
@@ -1,6 +0,0 @@
-Sample OpenVPN Configuration Files.
-
-These files are part of the OpenVPN HOWTO
-which is located at:
-
-http://openvpn.net/howto.html
diff --git a/openvpn/sample/sample-config-files/client.conf b/openvpn/sample/sample-config-files/client.conf
deleted file mode 100644
index 58b2038b..00000000
--- a/openvpn/sample/sample-config-files/client.conf
+++ /dev/null
@@ -1,123 +0,0 @@
-##############################################
-# Sample client-side OpenVPN 2.0 config file #
-# for connecting to multi-client server.     #
-#                                            #
-# This configuration can be used by multiple #
-# clients, however each client should have   #
-# its own cert and key files.                #
-#                                            #
-# On Windows, you might want to rename this  #
-# file so it has a .ovpn extension           #
-##############################################
-
-# Specify that we are a client and that we
-# will be pulling certain config file directives
-# from the server.
-client
-
-# Use the same setting as you are using on
-# the server.
-# On most systems, the VPN will not function
-# unless you partially or fully disable
-# the firewall for the TUN/TAP interface.
-;dev tap
-dev tun
-
-# Windows needs the TAP-Win32 adapter name
-# from the Network Connections panel
-# if you have more than one.  On XP SP2,
-# you may need to disable the firewall
-# for the TAP adapter.
-;dev-node MyTap
-
-# Are we connecting to a TCP or
-# UDP server?  Use the same setting as
-# on the server.
-;proto tcp
-proto udp
-
-# The hostname/IP and port of the server.
-# You can have multiple remote entries
-# to load balance between the servers.
-remote my-server-1 1194
-;remote my-server-2 1194
-
-# Choose a random host from the remote
-# list for load-balancing.  Otherwise
-# try hosts in the order specified.
-;remote-random
-
-# Keep trying indefinitely to resolve the
-# host name of the OpenVPN server.  Very useful
-# on machines which are not permanently connected
-# to the internet such as laptops.
-resolv-retry infinite
-
-# Most clients don't need to bind to
-# a specific local port number.
-nobind
-
-# Downgrade privileges after initialization (non-Windows only)
-;user nobody
-;group nobody
-
-# Try to preserve some state across restarts.
-persist-key
-persist-tun
-
-# If you are connecting through an
-# HTTP proxy to reach the actual OpenVPN
-# server, put the proxy server/IP and
-# port number here.  See the man page
-# if your proxy server requires
-# authentication.
-;http-proxy-retry # retry on connection failures
-;http-proxy [proxy server] [proxy port #]
-
-# Wireless networks often produce a lot
-# of duplicate packets.  Set this flag
-# to silence duplicate packet warnings.
-;mute-replay-warnings
-
-# SSL/TLS parms.
-# See the server config file for more
-# description.  It's best to use
-# a separate .crt/.key file pair
-# for each client.  A single ca
-# file can be used for all clients.
-ca ca.crt
-cert client.crt
-key client.key
-
-# Verify server certificate by checking
-# that the certicate has the nsCertType
-# field set to "server".  This is an
-# important precaution to protect against
-# a potential attack discussed here:
-#  http://openvpn.net/howto.html#mitm
-#
-# To use this feature, you will need to generate
-# your server certificates with the nsCertType
-# field set to "server".  The build-key-server
-# script in the easy-rsa folder will do this.
-ns-cert-type server
-
-# If a tls-auth key is used on the server
-# then every client must also have the key.
-;tls-auth ta.key 1
-
-# Select a cryptographic cipher.
-# If the cipher option is used on the server
-# then you must also specify it here.
-;cipher x
-
-# Enable compression on the VPN link.
-# Don't enable this unless it is also
-# enabled in the server config file.
-comp-lzo
-
-# Set log file verbosity.
-verb 3
-
-# Silence repeating messages
-;mute 20
diff --git a/openvpn/sample/sample-config-files/firewall.sh b/openvpn/sample/sample-config-files/firewall.sh
deleted file mode 100755
index 19d75ee9..00000000
--- a/openvpn/sample/sample-config-files/firewall.sh
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/bin/sh
-
-# A Sample OpenVPN-aware firewall.
-
-# eth0 is connected to the internet.
-# eth1 is connected to a private subnet.
-
-# Change this subnet to correspond to your private
-# ethernet subnet.  Home will use HOME_NET/24 and
-# Office will use OFFICE_NET/24.
-PRIVATE=10.0.0.0/24
-
-# Loopback address
-LOOP=127.0.0.1
-
-# Delete old iptables rules
-# and temporarily block all traffic.
-iptables -P OUTPUT DROP
-iptables -P INPUT DROP
-iptables -P FORWARD DROP
-iptables -F
-
-# Set default policies
-iptables -P OUTPUT ACCEPT
-iptables -P INPUT DROP
-iptables -P FORWARD DROP
-
-# Prevent external packets from using loopback addr
-iptables -A INPUT -i eth0 -s $LOOP -j DROP
-iptables -A FORWARD -i eth0 -s $LOOP -j DROP
-iptables -A INPUT -i eth0 -d $LOOP -j DROP
-iptables -A FORWARD -i eth0 -d $LOOP -j DROP
-
-# Anything coming from the Internet should have a real Internet address
-iptables -A FORWARD -i eth0 -s 192.168.0.0/16 -j DROP
-iptables -A FORWARD -i eth0 -s 172.16.0.0/12 -j DROP
-iptables -A FORWARD -i eth0 -s 10.0.0.0/8 -j DROP
-iptables -A INPUT -i eth0 -s 192.168.0.0/16 -j DROP
-iptables -A INPUT -i eth0 -s 172.16.0.0/12 -j DROP
-iptables -A INPUT -i eth0 -s 10.0.0.0/8 -j DROP
-
-# Block outgoing NetBios (if you have windows machines running
-# on the private subnet).  This will not affect any NetBios
-# traffic that flows over the VPN tunnel, but it will stop
-# local windows machines from broadcasting themselves to
-# the internet.
-iptables -A FORWARD -p tcp --sport 137:139 -o eth0 -j DROP
-iptables -A FORWARD -p udp --sport 137:139 -o eth0 -j DROP
-iptables -A OUTPUT -p tcp --sport 137:139 -o eth0 -j DROP
-iptables -A OUTPUT -p udp --sport 137:139 -o eth0 -j DROP
-
-# Check source address validity on packets going out to internet
-iptables -A FORWARD -s ! $PRIVATE -i eth1 -j DROP
-
-# Allow local loopback
-iptables -A INPUT -s $LOOP -j ACCEPT
-iptables -A INPUT -d $LOOP -j ACCEPT
-
-# Allow incoming pings (can be disabled)
-iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT
-
-# Allow services such as www and ssh (can be disabled)
-iptables -A INPUT -p tcp --dport http -j ACCEPT
-iptables -A INPUT -p tcp --dport ssh -j ACCEPT
-
-# Allow incoming OpenVPN packets
-# Duplicate the line below for each
-# OpenVPN tunnel, changing --dport n
-# to match the OpenVPN UDP port.
-#
-# In OpenVPN, the port number is
-# controlled by the --port n option.
-# If you put this option in the config
-# file, you can remove the leading '--'
-#
-# If you taking the stateful firewall
-# approach (see the OpenVPN HOWTO),
-# then comment out the line below.
-
-iptables -A INPUT -p udp --dport 1194 -j ACCEPT
-
-# Allow packets from TUN/TAP devices.
-# When OpenVPN is run in a secure mode,
-# it will authenticate packets prior
-# to their arriving on a tun or tap
-# interface.  Therefore, it is not
-# necessary to add any filters here,
-# unless you want to restrict the
-# type of packets which can flow over
-# the tunnel.
-
-iptables -A INPUT -i tun+ -j ACCEPT
-iptables -A FORWARD -i tun+ -j ACCEPT
-iptables -A INPUT -i tap+ -j ACCEPT
-iptables -A FORWARD -i tap+ -j ACCEPT
-
-# Allow packets from private subnets
-iptables -A INPUT -i eth1 -j ACCEPT
-iptables -A FORWARD -i eth1 -j ACCEPT
-
-# Keep state of connections from local machine and private subnets
-iptables -A OUTPUT -m state --state NEW -o eth0 -j ACCEPT
-iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-iptables -A FORWARD -m state --state NEW -o eth0 -j ACCEPT
-iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
-
-# Masquerade local subnet
-iptables -t nat -A POSTROUTING -s $PRIVATE -o eth0 -j MASQUERADE
diff --git a/openvpn/sample/sample-config-files/home.up b/openvpn/sample/sample-config-files/home.up
deleted file mode 100755
index 9c347cc5..00000000
--- a/openvpn/sample/sample-config-files/home.up
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/bin/sh
-route add -net 10.0.0.0 netmask 255.255.255.0 gw $5
diff --git a/openvpn/sample/sample-config-files/loopback-client b/openvpn/sample/sample-config-files/loopback-client
deleted file mode 100644
index d7f59e69..00000000
--- a/openvpn/sample/sample-config-files/loopback-client
+++ /dev/null
@@ -1,25 +0,0 @@
-# Perform a TLS loopback test -- client side.
-#
-# This test performs a TLS negotiation once every 10 seconds,
-# and will terminate after 2 minutes.
-#
-# From the root directory of the OpenVPN distribution,
-# after openvpn has been built, run:
-#
-#  ./openvpn --config sample-config-files/loopback-client  (In one window) 
-#  ./openvpn --config sample-config-files/loopback-server  (Simultaneously in another window) 
-
-rport 16000
-lport 16001
-remote localhost
-local localhost
-dev null
-verb 3
-reneg-sec 10
-tls-client
-ca sample-keys/ca.crt
-key sample-keys/client.key
-cert sample-keys/client.crt
-cipher DES-EDE3-CBC
-ping 1
-inactive 120 10000000
diff --git a/openvpn/sample/sample-config-files/loopback-server b/openvpn/sample/sample-config-files/loopback-server
deleted file mode 100644
index 9d21bcec..00000000
--- a/openvpn/sample/sample-config-files/loopback-server
+++ /dev/null
@@ -1,26 +0,0 @@
-# Perform a TLS loopback test -- server side.
-#
-# This test performs a TLS negotiation once every 10 seconds,
-# and will terminate after 2 minutes.
-#
-# From the root directory of the OpenVPN distribution,
-# after openvpn has been built, run:
-#
-#  ./openvpn --config sample-config-files/loopback-client  (In one window) 
-#  ./openvpn --config sample-config-files/loopback-server  (Simultaneously in another window) 
-
-rport 16001
-lport 16000
-remote localhost
-local localhost
-dev null
-verb 3
-reneg-sec 10
-tls-server
-dh sample-keys/dh1024.pem
-ca sample-keys/ca.crt
-key sample-keys/server.key
-cert sample-keys/server.crt
-cipher DES-EDE3-CBC
-ping 1
-inactive 120 10000000
diff --git a/openvpn/sample/sample-config-files/office.up b/openvpn/sample/sample-config-files/office.up
deleted file mode 100755
index 74a71a33..00000000
--- a/openvpn/sample/sample-config-files/office.up
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/bin/sh
-route add -net 10.0.1.0 netmask 255.255.255.0 gw $5
diff --git a/openvpn/sample/sample-config-files/openvpn-shutdown.sh b/openvpn/sample/sample-config-files/openvpn-shutdown.sh
deleted file mode 100755
index 8ed2d1d5..00000000
--- a/openvpn/sample/sample-config-files/openvpn-shutdown.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-# stop all openvpn processes
-
-killall -TERM openvpn
diff --git a/openvpn/sample/sample-config-files/openvpn-startup.sh b/openvpn/sample/sample-config-files/openvpn-startup.sh
deleted file mode 100755
index 0ee006bc..00000000
--- a/openvpn/sample/sample-config-files/openvpn-startup.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-
-# A sample OpenVPN startup script
-# for Linux.
-
-# openvpn config file directory
-dir=/etc/openvpn
-
-# load the firewall
-$dir/firewall.sh
-
-# load TUN/TAP kernel module
-modprobe tun
-
-# enable IP forwarding
-echo 1 > /proc/sys/net/ipv4/ip_forward
-
-# Invoke openvpn for each VPN tunnel
-# in daemon mode.  Alternatively,
-# you could remove "--daemon" from
-# the command line and add "daemon"
-# to the config file.
-#
-# Each tunnel should run on a separate
-# UDP port.  Use the "port" option
-# to control this.  Like all of
-# OpenVPN's options, you can
-# specify "--port 8000" on the command
-# line or "port 8000" in the config
-# file.
-
-openvpn --cd $dir --daemon --config vpn1.conf
-openvpn --cd $dir --daemon --config vpn2.conf
-openvpn --cd $dir --daemon --config vpn2.conf
diff --git a/openvpn/sample/sample-config-files/server.conf b/openvpn/sample/sample-config-files/server.conf
deleted file mode 100644
index f483b6bb..00000000
--- a/openvpn/sample/sample-config-files/server.conf
+++ /dev/null
@@ -1,299 +0,0 @@
-#################################################
-# Sample OpenVPN 2.0 config file for            #
-# multi-client server.                          #
-#                                               #
-# This file is for the server side              #
-# of a many-clients <-> one-server              #
-# OpenVPN configuration.                        #
-#                                               #
-# OpenVPN also supports                         #
-# single-machine <-> single-machine             #
-# configurations (See the Examples page         #
-# on the web site for more info).               #
-#                                               #
-# This config should work on Windows            #
-# or Linux/BSD systems.  Remember on            #
-# Windows to quote pathnames and use            #
-# double backslashes, e.g.:                     #
-# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
-#                                               #
-# Comments are preceded with '#' or ';'         #
-#################################################
-
-# Which local IP address should OpenVPN
-# listen on? (optional)
-;local a.b.c.d
-
-# Which TCP/UDP port should OpenVPN listen on?
-# If you want to run multiple OpenVPN instances
-# on the same machine, use a different port
-# number for each one.  You will need to
-# open up this port on your firewall.
-port 1194
-
-# TCP or UDP server?
-;proto tcp
-proto udp
-
-# "dev tun" will create a routed IP tunnel,
-# "dev tap" will create an ethernet tunnel.
-# Use "dev tap0" if you are ethernet bridging
-# and have precreated a tap0 virtual interface
-# and bridged it with your ethernet interface.
-# If you want to control access policies
-# over the VPN, you must create firewall
-# rules for the the TUN/TAP interface.
-# On non-Windows systems, you can give
-# an explicit unit number, such as tun0.
-# On Windows, use "dev-node" for this.
-# On most systems, the VPN will not function
-# unless you partially or fully disable
-# the firewall for the TUN/TAP interface.
-;dev tap
-dev tun
-
-# Windows needs the TAP-Win32 adapter name
-# from the Network Connections panel if you
-# have more than one.  On XP SP2 or higher,
-# you may need to selectively disable the
-# Windows firewall for the TAP adapter.
-# Non-Windows systems usually don't need this.
-;dev-node MyTap
-
-# SSL/TLS root certificate (ca), certificate
-# (cert), and private key (key).  Each client
-# and the server must have their own cert and
-# key file.  The server and all clients will
-# use the same ca file.
-#
-# See the "easy-rsa" directory for a series
-# of scripts for generating RSA certificates
-# and private keys.  Remember to use
-# a unique Common Name for the server
-# and each of the client certificates.
-#
-# Any X509 key management system can be used.
-# OpenVPN can also use a PKCS #12 formatted key file
-# (see "pkcs12" directive in man page).
-ca ca.crt
-cert server.crt
-key server.key  # This file should be kept secret
-
-# Diffie hellman parameters.
-# Generate your own with:
-#   openssl dhparam -out dh1024.pem 1024
-# Substitute 2048 for 1024 if you are using
-# 2048 bit keys. 
-dh dh1024.pem
-
-# Configure server mode and supply a VPN subnet
-# for OpenVPN to draw client addresses from.
-# The server will take 10.8.0.1 for itself,
-# the rest will be made available to clients.
-# Each client will be able to reach the server
-# on 10.8.0.1. Comment this line out if you are
-# ethernet bridging. See the man page for more info.
-server 10.8.0.0 255.255.255.0
-
-# Maintain a record of client <-> virtual IP address
-# associations in this file.  If OpenVPN goes down or
-# is restarted, reconnecting clients can be assigned
-# the same virtual IP address from the pool that was
-# previously assigned.
-ifconfig-pool-persist ipp.txt
-
-# Configure server mode for ethernet bridging.
-# You must first use your OS's bridging capability
-# to bridge the TAP interface with the ethernet
-# NIC interface.  Then you must manually set the
-# IP/netmask on the bridge interface, here we
-# assume 10.8.0.4/255.255.255.0.  Finally we
-# must set aside an IP range in this subnet
-# (start=10.8.0.50 end=10.8.0.100) to allocate
-# to connecting clients.  Leave this line commented
-# out unless you are ethernet bridging.
-;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
-
-# Configure server mode for ethernet bridging
-# using a DHCP-proxy, where clients talk
-# to the OpenVPN server-side DHCP server
-# to receive their IP address allocation
-# and DNS server addresses.  You must first use
-# your OS's bridging capability to bridge the TAP
-# interface with the ethernet NIC interface.
-# Note: this mode only works on clients (such as
-# Windows), where the client-side TAP adapter is
-# bound to a DHCP client.
-;server-bridge
-
-# Push routes to the client to allow it
-# to reach other private subnets behind
-# the server.  Remember that these
-# private subnets will also need
-# to know to route the OpenVPN client
-# address pool (10.8.0.0/255.255.255.0)
-# back to the OpenVPN server.
-;push "route 192.168.10.0 255.255.255.0"
-;push "route 192.168.20.0 255.255.255.0"
-
-# To assign specific IP addresses to specific
-# clients or if a connecting client has a private
-# subnet behind it that should also have VPN access,
-# use the subdirectory "ccd" for client-specific
-# configuration files (see man page for more info).
-
-# EXAMPLE: Suppose the client
-# having the certificate common name "Thelonious"
-# also has a small subnet behind his connecting
-# machine, such as 192.168.40.128/255.255.255.248.
-# First, uncomment out these lines:
-;client-config-dir ccd
-;route 192.168.40.128 255.255.255.248
-# Then create a file ccd/Thelonious with this line:
-#   iroute 192.168.40.128 255.255.255.248
-# This will allow Thelonious' private subnet to
-# access the VPN.  This example will only work
-# if you are routing, not bridging, i.e. you are
-# using "dev tun" and "server" directives.
-
-# EXAMPLE: Suppose you want to give
-# Thelonious a fixed VPN IP address of 10.9.0.1.
-# First uncomment out these lines:
-;client-config-dir ccd
-;route 10.9.0.0 255.255.255.252
-# Then add this line to ccd/Thelonious:
-#   ifconfig-push 10.9.0.1 10.9.0.2
-
-# Suppose that you want to enable different
-# firewall access policies for different groups
-# of clients.  There are two methods:
-# (1) Run multiple OpenVPN daemons, one for each
-#     group, and firewall the TUN/TAP interface
-#     for each group/daemon appropriately.
-# (2) (Advanced) Create a script to dynamically
-#     modify the firewall in response to access
-#     from different clients.  See man
-#     page for more info on learn-address script.
-;learn-address ./script
-
-# If enabled, this directive will configure
-# all clients to redirect their default
-# network gateway through the VPN, causing
-# all IP traffic such as web browsing and
-# and DNS lookups to go through the VPN
-# (The OpenVPN server machine may need to NAT
-# or bridge the TUN/TAP interface to the internet
-# in order for this to work properly).
-;push "redirect-gateway def1 bypass-dhcp"
-
-# Certain Windows-specific network settings
-# can be pushed to clients, such as DNS
-# or WINS server addresses.  CAVEAT:
-# http://openvpn.net/faq.html#dhcpcaveats
-# The addresses below refer to the public
-# DNS servers provided by opendns.com.
-;push "dhcp-option DNS 208.67.222.222"
-;push "dhcp-option DNS 208.67.220.220"
-
-# Uncomment this directive to allow different
-# clients to be able to "see" each other.
-# By default, clients will only see the server.
-# To force clients to only see the server, you
-# will also need to appropriately firewall the
-# server's TUN/TAP interface.
-;client-to-client
-
-# Uncomment this directive if multiple clients
-# might connect with the same certificate/key
-# files or common names.  This is recommended
-# only for testing purposes.  For production use,
-# each client should have its own certificate/key
-# pair.
-#
-# IF YOU HAVE NOT GENERATED INDIVIDUAL
-# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
-# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
-# UNCOMMENT THIS LINE OUT.
-;duplicate-cn
-
-# The keepalive directive causes ping-like
-# messages to be sent back and forth over
-# the link so that each side knows when
-# the other side has gone down.
-# Ping every 10 seconds, assume that remote
-# peer is down if no ping received during
-# a 120 second time period.
-keepalive 10 120
-
-# For extra security beyond that provided
-# by SSL/TLS, create an "HMAC firewall"
-# to help block DoS attacks and UDP port flooding.
-#
-# Generate with:
-#   openvpn --genkey --secret ta.key
-#
-# The server and each client must have
-# a copy of this key.
-# The second parameter should be '0'
-# on the server and '1' on the clients.
-;tls-auth ta.key 0 # This file is secret
-
-# Select a cryptographic cipher.
-# This config item must be copied to
-# the client config file as well.
-;cipher BF-CBC        # Blowfish (default)
-;cipher AES-128-CBC   # AES
-;cipher DES-EDE3-CBC  # Triple-DES
-
-# Enable compression on the VPN link.
-# If you enable it here, you must also
-# enable it in the client config file.
-comp-lzo
-
-# The maximum number of concurrently connected
-# clients we want to allow.
-;max-clients 100
-
-# It's a good idea to reduce the OpenVPN
-# daemon's privileges after initialization.
-#
-# You can uncomment this out on
-# non-Windows systems.
-;user nobody
-;group nobody
-
-# The persist options will try to avoid
-# accessing certain resources on restart
-# that may no longer be accessible because
-# of the privilege downgrade.
-persist-key
-persist-tun
-
-# Output a short status file showing
-# current connections, truncated
-# and rewritten every minute.
-status openvpn-status.log
-
-# By default, log messages will go to the syslog (or
-# on Windows, if running as a service, they will go to
-# the "\Program Files\OpenVPN\log" directory).
-# Use log or log-append to override this default.
-# "log" will truncate the log file on OpenVPN startup,
-# while "log-append" will append to it.  Use one
-# or the other (but not both).
-;log         openvpn.log
-;log-append  openvpn.log
-
-# Set the appropriate level of log
-# file verbosity.
-#
-# 0 is silent, except for fatal errors
-# 4 is reasonable for general usage
-# 5 and 6 can help to debug connection problems
-# 9 is extremely verbose
-verb 3
-
-# Silence repeating messages.  At most 20
-# sequential messages of the same message
-# category will be output to the log.
-;mute 20
diff --git a/openvpn/sample/sample-config-files/static-home.conf b/openvpn/sample/sample-config-files/static-home.conf
deleted file mode 100644
index c9666874..00000000
--- a/openvpn/sample/sample-config-files/static-home.conf
+++ /dev/null
@@ -1,72 +0,0 @@
-#
-# Sample OpenVPN configuration file for
-# home using a pre-shared static key.
-#
-# '#' or ';' may be used to delimit comments.
-
-# Use a dynamic tun device.
-# For Linux 2.2 or non-Linux OSes,
-# you may want to use an explicit
-# unit number such as "tun1".
-# OpenVPN also supports virtual
-# ethernet "tap" devices.
-dev tun
-
-# Our OpenVPN peer is the office gateway.
-remote 1.2.3.4
-
-# 10.1.0.2 is our local VPN endpoint (home).
-# 10.1.0.1 is our remote VPN endpoint (office).
-ifconfig 10.1.0.2 10.1.0.1
-
-# Our up script will establish routes
-# once the VPN is alive.
-up ./home.up
-
-# Our pre-shared static key
-secret static.key
-
-# OpenVPN 2.0 uses UDP port 1194 by default
-# (official port assignment by iana.org 11/04).
-# OpenVPN 1.x uses UDP port 5000 by default.
-# Each OpenVPN tunnel must use
-# a different port number.
-# lport or rport can be used
-# to denote different ports
-# for local and remote.
-; port 1194
-
-# Downgrade UID and GID to
-# "nobody" after initialization
-# for extra security.
-; user nobody
-; group nobody
-
-# If you built OpenVPN with
-# LZO compression, uncomment
-# out the following line.
-; comp-lzo
-
-# Send a UDP ping to remote once
-# every 15 seconds to keep
-# stateful firewall connection
-# alive.  Uncomment this
-# out if you are using a stateful
-# firewall.
-; ping 15
-
-# Uncomment this section for a more reliable detection when a system
-# loses its connection.  For example, dial-ups or laptops that
-# travel to other locations.
-; ping 15
-; ping-restart 45
-; ping-timer-rem
-; persist-tun
-; persist-key
-
-# Verbosity level.
-# 0 -- quiet except for fatal errors.
-# 1 -- mostly quiet, but display non-fatal network errors.
-# 3 -- medium output, good for normal operation.
-# 9 -- verbose, good for troubleshooting
-verb 3
diff --git a/openvpn/sample/sample-config-files/static-office.conf b/openvpn/sample/sample-config-files/static-office.conf
deleted file mode 100644
index 68030cc9..00000000
--- a/openvpn/sample/sample-config-files/static-office.conf
+++ /dev/null
@@ -1,69 +0,0 @@
-#
-# Sample OpenVPN configuration file for
-# office using a pre-shared static key.
-#
-# '#' or ';' may be used to delimit comments.
-
-# Use a dynamic tun device.
-# For Linux 2.2 or non-Linux OSes,
-# you may want to use an explicit
-# unit number such as "tun1".
-# OpenVPN also supports virtual
-# ethernet "tap" devices.
-dev tun
-
-# 10.1.0.1 is our local VPN endpoint (office).
-# 10.1.0.2 is our remote VPN endpoint (home).
-ifconfig 10.1.0.1 10.1.0.2
-
-# Our up script will establish routes
-# once the VPN is alive.
-up ./office.up
-
-# Our pre-shared static key
-secret static.key
-
-# OpenVPN 2.0 uses UDP port 1194 by default
-# (official port assignment by iana.org 11/04).
-# OpenVPN 1.x uses UDP port 5000 by default.
-# Each OpenVPN tunnel must use
-# a different port number.
-# lport or rport can be used
-# to denote different ports
-# for local and remote.
-; port 1194
-
-# Downgrade UID and GID to
-# "nobody" after initialization
-# for extra security.
-; user nobody
-; group nobody
-
-# If you built OpenVPN with
-# LZO compression, uncomment
-# out the following line.
-; comp-lzo
-
-# Send a UDP ping to remote once
-# every 15 seconds to keep
-# stateful firewall connection
-# alive.  Uncomment this
-# out if you are using a stateful
-# firewall.
-; ping 15
-
-# Uncomment this section for a more reliable detection when a system
-# loses its connection.  For example, dial-ups or laptops that
-# travel to other locations.
-; ping 15
-; ping-restart 45
-; ping-timer-rem
-; persist-tun
-; persist-key
-
-# Verbosity level.
-# 0 -- quiet except for fatal errors.
-# 1 -- mostly quiet, but display non-fatal network errors.
-# 3 -- medium output, good for normal operation.
-# 9 -- verbose, good for troubleshooting
-verb 3
diff --git a/openvpn/sample/sample-config-files/tls-home.conf b/openvpn/sample/sample-config-files/tls-home.conf
deleted file mode 100644
index daa4ea1e..00000000
--- a/openvpn/sample/sample-config-files/tls-home.conf
+++ /dev/null
@@ -1,83 +0,0 @@
-#
-# Sample OpenVPN configuration file for
-# home using SSL/TLS mode and RSA certificates/keys.
-#
-# '#' or ';' may be used to delimit comments.
-
-# Use a dynamic tun device.
-# For Linux 2.2 or non-Linux OSes,
-# you may want to use an explicit
-# unit number such as "tun1".
-# OpenVPN also supports virtual
-# ethernet "tap" devices.
-dev tun
-
-# Our OpenVPN peer is the office gateway.
-remote 1.2.3.4
-
-# 10.1.0.2 is our local VPN endpoint (home).
-# 10.1.0.1 is our remote VPN endpoint (office).
-ifconfig 10.1.0.2 10.1.0.1
-
-# Our up script will establish routes
-# once the VPN is alive.
-up ./home.up
-
-# In SSL/TLS key exchange, Office will
-# assume server role and Home
-# will assume client role.
-tls-client
-
-# Certificate Authority file
-ca my-ca.crt
-
-# Our certificate/public key
-cert home.crt
-
-# Our private key
-key home.key
-
-# OpenVPN 2.0 uses UDP port 1194 by default
-# (official port assignment by iana.org 11/04).
-# OpenVPN 1.x uses UDP port 5000 by default.
-# Each OpenVPN tunnel must use
-# a different port number.
-# lport or rport can be used
-# to denote different ports
-# for local and remote.
-; port 1194
-
-# Downgrade UID and GID to
-# "nobody" after initialization
-# for extra security.
-; user nobody
-; group nobody
-
-# If you built OpenVPN with
-# LZO compression, uncomment
-# out the following line.
-; comp-lzo
-
-# Send a UDP ping to remote once
-# every 15 seconds to keep
-# stateful firewall connection
-# alive.  Uncomment this
-# out if you are using a stateful
-# firewall.
-; ping 15
-
-# Uncomment this section for a more reliable detection when a system
-# loses its connection.  For example, dial-ups or laptops that
-# travel to other locations.
-; ping 15
-; ping-restart 45
-; ping-timer-rem
-; persist-tun
-; persist-key
-
-# Verbosity level.
-# 0 -- quiet except for fatal errors.
-# 1 -- mostly quiet, but display non-fatal network errors.
-# 3 -- medium output, good for normal operation.
-# 9 -- verbose, good for troubleshooting
-verb 3
diff --git a/openvpn/sample/sample-config-files/tls-office.conf b/openvpn/sample/sample-config-files/tls-office.conf
deleted file mode 100644
index f790f469..00000000
--- a/openvpn/sample/sample-config-files/tls-office.conf
+++ /dev/null
@@ -1,83 +0,0 @@
-#
-# Sample OpenVPN configuration file for
-# office using SSL/TLS mode and RSA certificates/keys.
-#
-# '#' or ';' may be used to delimit comments.
-
-# Use a dynamic tun device.
-# For Linux 2.2 or non-Linux OSes,
-# you may want to use an explicit
-# unit number such as "tun1".
-# OpenVPN also supports virtual
-# ethernet "tap" devices.
-dev tun
-
-# 10.1.0.1 is our local VPN endpoint (office).
-# 10.1.0.2 is our remote VPN endpoint (home).
-ifconfig 10.1.0.1 10.1.0.2
-
-# Our up script will establish routes
-# once the VPN is alive.
-up ./office.up
-
-# In SSL/TLS key exchange, Office will
-# assume server role and Home
-# will assume client role.
-tls-server
-
-# Diffie-Hellman Parameters (tls-server only)
-dh dh1024.pem
-
-# Certificate Authority file
-ca my-ca.crt
-
-# Our certificate/public key
-cert office.crt
-
-# Our private key
-key office.key
-
-# OpenVPN 2.0 uses UDP port 1194 by default
-# (official port assignment by iana.org 11/04).
-# OpenVPN 1.x uses UDP port 5000 by default.
-# Each OpenVPN tunnel must use
-# a different port number.
-# lport or rport can be used
-# to denote different ports
-# for local and remote.
-; port 1194
-
-# Downgrade UID and GID to
-# "nobody" after initialization
-# for extra security.
-; user nobody
-; group nobody
-
-# If you built OpenVPN with
-# LZO compression, uncomment
-# out the following line.
-; comp-lzo
-
-# Send a UDP ping to remote once
-# every 15 seconds to keep
-# stateful firewall connection
-# alive.  Uncomment this
-# out if you are using a stateful
-# firewall.
-; ping 15
-
-# Uncomment this section for a more reliable detection when a system
-# loses its connection.  For example, dial-ups or laptops that
-# travel to other locations.
-; ping 15
-; ping-restart 45
-; ping-timer-rem
-; persist-tun
-; persist-key
-
-# Verbosity level.
-# 0 -- quiet except for fatal errors.
-# 1 -- mostly quiet, but display non-fatal network errors.
-# 3 -- medium output, good for normal operation.
-# 9 -- verbose, good for troubleshooting
-verb 3
diff --git a/openvpn/sample/sample-config-files/xinetd-client-config b/openvpn/sample/sample-config-files/xinetd-client-config
deleted file mode 100644
index 03c5c1fa..00000000
--- a/openvpn/sample/sample-config-files/xinetd-client-config
+++ /dev/null
@@ -1,11 +0,0 @@
-# This OpenVPN config file
-# is the client side counterpart
-# of xinetd-server-config
-
-dev tun
-ifconfig 10.4.0.1 10.4.0.2
-remote my-server
-port 1194
-user nobody
-secret /root/openvpn/key
-inactive 600
diff --git a/openvpn/sample/sample-config-files/xinetd-server-config b/openvpn/sample/sample-config-files/xinetd-server-config
deleted file mode 100644
index 803a6f8f..00000000
--- a/openvpn/sample/sample-config-files/xinetd-server-config
+++ /dev/null
@@ -1,25 +0,0 @@
-# An xinetd configuration file for OpenVPN.
-#
-# This file should be renamed to openvpn or something suitably
-# descriptive and copied to the /etc/xinetd.d directory.
-# xinetd can then be made aware of this file by restarting
-# it or sending it a SIGHUP signal.
-#
-# For each potential incoming client, create a separate version
-# of this configuration file on a unique port number.  Also note
-# that the key file and ifconfig endpoints should be unique for
-# each client.  This configuration assumes that the OpenVPN
-# executable and key live in /root/openvpn.  Change this to fit
-# your environment.
-
-service openvpn_1
-{
-        type            = UNLISTED
-        port            = 1194
-        socket_type     = dgram
-        protocol        = udp
-        wait            = yes
-        user            = root
-        server          = /root/openvpn/openvpn
-        server_args     = --inetd --dev tun --ifconfig 10.4.0.2 10.4.0.1 --secret /root/openvpn/key --inactive 600 --user nobody
-}