Next step: compile jni sources correctly.

1 files changed, 0 insertions, 351 deletions

diff --git a/openssl/crypto/sha/asm/sha1-x86_64.pl b/openssl/crypto/sha/asm/sha1-x86_64.pl
deleted file mode 100755
index 4edc5ea9..00000000
--- a/openssl/crypto/sha/asm/sha1-x86_64.pl
+++ /dev/null
@@ -1,351 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-#
-# sha1_block procedure for x86_64.
-#
-# It was brought to my attention that on EM64T compiler-generated code
-# was far behind 32-bit assembler implementation. This is unlike on
-# Opteron where compiler-generated code was only 15% behind 32-bit
-# assembler, which originally made it hard to motivate the effort.
-# There was suggestion to mechanically translate 32-bit code, but I
-# dismissed it, reasoning that x86_64 offers enough register bank
-# capacity to fully utilize SHA-1 parallelism. Therefore this fresh
-# implementation:-) However! While 64-bit code does performs better
-# on Opteron, I failed to beat 32-bit assembler on EM64T core. Well,
-# x86_64 does offer larger *addressable* bank, but out-of-order core
-# reaches for even more registers through dynamic aliasing, and EM64T
-# core must have managed to run-time optimize even 32-bit code just as
-# good as 64-bit one. Performance improvement is summarized in the
-# following table:
-#
-#		gcc 3.4		32-bit asm	cycles/byte
-# Opteron	+45%		+20%		6.8
-# Xeon P4	+65%		+0%		9.9
-# Core2		+60%		+10%		7.0
-
-$flavour = shift;
-$output  = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
-
-$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
-( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
-die "can't locate x86_64-xlate.pl";
-
-open STDOUT,"| $^X $xlate $flavour $output";
-
-$ctx="%rdi";	# 1st arg
-$inp="%rsi";	# 2nd arg
-$num="%rdx";	# 3rd arg
-
-# reassign arguments in order to produce more compact code
-$ctx="%r8";
-$inp="%r9";
-$num="%r10";
-
-$xi="%eax";
-$t0="%ebx";
-$t1="%ecx";
-$A="%edx";
-$B="%esi";
-$C="%edi";
-$D="%ebp";
-$E="%r11d";
-$T="%r12d";
-
-@V=($A,$B,$C,$D,$E,$T);
-
-sub PROLOGUE {
-my $func=shift;
-$code.=<<___;
-.globl	$func
-.type	$func,\@function,3
-.align	16
-$func:
-	push	%rbx
-	push	%rbp
-	push	%r12
-	mov	%rsp,%r11
-	mov	%rdi,$ctx	# reassigned argument
-	sub	\$`8+16*4`,%rsp
-	mov	%rsi,$inp	# reassigned argument
-	and	\$-64,%rsp
-	mov	%rdx,$num	# reassigned argument
-	mov	%r11,`16*4`(%rsp)
-.Lprologue:
-
-	mov	0($ctx),$A
-	mov	4($ctx),$B
-	mov	8($ctx),$C
-	mov	12($ctx),$D
-	mov	16($ctx),$E
-___
-}
-
-sub EPILOGUE {
-my $func=shift;
-$code.=<<___;
-	mov	`16*4`(%rsp),%rsi
-	mov	(%rsi),%r12
-	mov	8(%rsi),%rbp
-	mov	16(%rsi),%rbx
-	lea	24(%rsi),%rsp
-.Lepilogue:
-	ret
-.size	$func,.-$func
-___
-}
-
-sub BODY_00_19 {
-my ($i,$a,$b,$c,$d,$e,$f,$host)=@_;
-my $j=$i+1;
-$code.=<<___ if ($i==0);
-	mov	`4*$i`($inp),$xi	
-	`"bswap	$xi"	if(!defined($host))`
-	mov	$xi,`4*$i`(%rsp)
-___
-$code.=<<___ if ($i<15);
-	lea	0x5a827999($xi,$e),$f
-	mov	$c,$t0
-	mov	`4*$j`($inp),$xi
-	mov	$a,$e
-	xor	$d,$t0
-	`"bswap	$xi"	if(!defined($host))`	
-	rol	\$5,$e
-	and	$b,$t0
-	mov	$xi,`4*$j`(%rsp)
-	add	$e,$f
-	xor	$d,$t0
-	rol	\$30,$b
-	add	$t0,$f
-___
-$code.=<<___ if ($i>=15);
-	lea	0x5a827999($xi,$e),$f
-	mov	`4*($j%16)`(%rsp),$xi
-	mov	$c,$t0
-	mov	$a,$e
-	xor	`4*(($j+2)%16)`(%rsp),$xi
-	xor	$d,$t0
-	rol	\$5,$e
-	xor	`4*(($j+8)%16)`(%rsp),$xi
-	and	$b,$t0
-	add	$e,$f
-	xor	`4*(($j+13)%16)`(%rsp),$xi
-	xor	$d,$t0
-	rol	\$30,$b
-	add	$t0,$f
-	rol	\$1,$xi
-	mov	$xi,`4*($j%16)`(%rsp)
-___
-}
-
-sub BODY_20_39 {
-my ($i,$a,$b,$c,$d,$e,$f)=@_;
-my $j=$i+1;
-my $K=($i<40)?0x6ed9eba1:0xca62c1d6;
-$code.=<<___ if ($i<79);
-	lea	$K($xi,$e),$f
-	mov	`4*($j%16)`(%rsp),$xi
-	mov	$c,$t0
-	mov	$a,$e
-	xor	`4*(($j+2)%16)`(%rsp),$xi
-	xor	$b,$t0
-	rol	\$5,$e
-	xor	`4*(($j+8)%16)`(%rsp),$xi
-	xor	$d,$t0
-	add	$e,$f
-	xor	`4*(($j+13)%16)`(%rsp),$xi
-	rol	\$30,$b
-	add	$t0,$f
-	rol	\$1,$xi
-___
-$code.=<<___ if ($i<76);
-	mov	$xi,`4*($j%16)`(%rsp)
-___
-$code.=<<___ if ($i==79);
-	lea	$K($xi,$e),$f
-	mov	$c,$t0
-	mov	$a,$e
-	xor	$b,$t0
-	rol	\$5,$e
-	xor	$d,$t0
-	add	$e,$f
-	rol	\$30,$b
-	add	$t0,$f
-___
-}
-
-sub BODY_40_59 {
-my ($i,$a,$b,$c,$d,$e,$f)=@_;
-my $j=$i+1;
-$code.=<<___;
-	lea	0x8f1bbcdc($xi,$e),$f
-	mov	`4*($j%16)`(%rsp),$xi
-	mov	$b,$t0
-	mov	$b,$t1
-	xor	`4*(($j+2)%16)`(%rsp),$xi
-	mov	$a,$e
-	and	$c,$t0
-	xor	`4*(($j+8)%16)`(%rsp),$xi
-	or	$c,$t1
-	rol	\$5,$e
-	xor	`4*(($j+13)%16)`(%rsp),$xi
-	and	$d,$t1
-	add	$e,$f
-	rol	\$1,$xi
-	or	$t1,$t0
-	rol	\$30,$b
-	mov	$xi,`4*($j%16)`(%rsp)
-	add	$t0,$f
-___
-}
-
-$code=".text\n";
-
-&PROLOGUE("sha1_block_data_order");
-$code.=".align	4\n.Lloop:\n";
-for($i=0;$i<20;$i++)	{ &BODY_00_19($i,@V); unshift(@V,pop(@V)); }
-for(;$i<40;$i++)	{ &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
-for(;$i<60;$i++)	{ &BODY_40_59($i,@V); unshift(@V,pop(@V)); }
-for(;$i<80;$i++)	{ &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
-$code.=<<___;
-	add	0($ctx),$E
-	add	4($ctx),$T
-	add	8($ctx),$A
-	add	12($ctx),$B
-	add	16($ctx),$C
-	mov	$E,0($ctx)
-	mov	$T,4($ctx)
-	mov	$A,8($ctx)
-	mov	$B,12($ctx)
-	mov	$C,16($ctx)
-
-	xchg	$E,$A	# mov	$E,$A
-	xchg	$T,$B	# mov	$T,$B
-	xchg	$E,$C	# mov	$A,$C
-	xchg	$T,$D	# mov	$B,$D
-			# mov	$C,$E
-	lea	`16*4`($inp),$inp
-	sub	\$1,$num
-	jnz	.Lloop
-___
-&EPILOGUE("sha1_block_data_order");
-$code.=<<___;
-.asciz	"SHA1 block transform for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
-.align	16
-___
-
-# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
-#		CONTEXT *context,DISPATCHER_CONTEXT *disp)
-if ($win64) {
-$rec="%rcx";
-$frame="%rdx";
-$context="%r8";
-$disp="%r9";
-
-$code.=<<___;
-.extern	__imp_RtlVirtualUnwind
-.type	se_handler,\@abi-omnipotent
-.align	16
-se_handler:
-	push	%rsi
-	push	%rdi
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-	pushfq
-	sub	\$64,%rsp
-
-	mov	120($context),%rax	# pull context->Rax
-	mov	248($context),%rbx	# pull context->Rip
-
-	lea	.Lprologue(%rip),%r10
-	cmp	%r10,%rbx		# context->Rip<.Lprologue
-	jb	.Lin_prologue
-
-	mov	152($context),%rax	# pull context->Rsp
-
-	lea	.Lepilogue(%rip),%r10
-	cmp	%r10,%rbx		# context->Rip>=.Lepilogue
-	jae	.Lin_prologue
-
-	mov	`16*4`(%rax),%rax	# pull saved stack pointer
-	lea	24(%rax),%rax
-
-	mov	-8(%rax),%rbx
-	mov	-16(%rax),%rbp
-	mov	-24(%rax),%r12
-	mov	%rbx,144($context)	# restore context->Rbx
-	mov	%rbp,160($context)	# restore context->Rbp
-	mov	%r12,216($context)	# restore context->R12
-
-.Lin_prologue:
-	mov	8(%rax),%rdi
-	mov	16(%rax),%rsi
-	mov	%rax,152($context)	# restore context->Rsp
-	mov	%rsi,168($context)	# restore context->Rsi
-	mov	%rdi,176($context)	# restore context->Rdi
-
-	mov	40($disp),%rdi		# disp->ContextRecord
-	mov	$context,%rsi		# context
-	mov	\$154,%ecx		# sizeof(CONTEXT)
-	.long	0xa548f3fc		# cld; rep movsq
-
-	mov	$disp,%rsi
-	xor	%rcx,%rcx		# arg1, UNW_FLAG_NHANDLER
-	mov	8(%rsi),%rdx		# arg2, disp->ImageBase
-	mov	0(%rsi),%r8		# arg3, disp->ControlPc
-	mov	16(%rsi),%r9		# arg4, disp->FunctionEntry
-	mov	40(%rsi),%r10		# disp->ContextRecord
-	lea	56(%rsi),%r11		# &disp->HandlerData
-	lea	24(%rsi),%r12		# &disp->EstablisherFrame
-	mov	%r10,32(%rsp)		# arg5
-	mov	%r11,40(%rsp)		# arg6
-	mov	%r12,48(%rsp)		# arg7
-	mov	%rcx,56(%rsp)		# arg8, (NULL)
-	call	*__imp_RtlVirtualUnwind(%rip)
-
-	mov	\$1,%eax		# ExceptionContinueSearch
-	add	\$64,%rsp
-	popfq
-	pop	%r15
-	pop	%r14
-	pop	%r13
-	pop	%r12
-	pop	%rbp
-	pop	%rbx
-	pop	%rdi
-	pop	%rsi
-	ret
-.size	se_handler,.-se_handler
-
-.section	.pdata
-.align	4
-	.rva	.LSEH_begin_sha1_block_data_order
-	.rva	.LSEH_end_sha1_block_data_order
-	.rva	.LSEH_info_sha1_block_data_order
-
-.section	.xdata
-.align	8
-.LSEH_info_sha1_block_data_order:
-	.byte	9,0,0,0
-	.rva	se_handler
-___
-}
-
-####################################################################
-
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-print $code;
-close STDOUT;